Clarion TTX 7503Z TTX7503Z User Manual

Owner’s Manual / Installation Manual  
Manuel de l’utilisateur / Manuel d’installation  
Bedienungs- & Installationsanleitung  
Manuale del proprietario e manuale di installazione  
Gebruiks- & Installatiehandleiding  
Manual del propietario / Manual de Instalación  
Bruks- och installationsanvisning  
Manual do Proprietário e Manual de Instalação  
TTX7503z  
CeNET TV TUNER (PAL/SECAM)  
TUNER TV CeNET (PAL/SECAM)  
CeNET-TV-TUNER (PAL/SECAM)  
SINTONIZZATORE TV CeNET (PAL/SECAM)  
NET TV-TUNER MET CeNET AANSLUITING (PAL/SECAM)  
SINTONIZADOR DE TV CeNET (PAL/SECAM)  
CeNET TV-TUNER (PAL/SECAM)  
TUNER TV CeNET (PAL/SECAM)  
MODEL  
TTX7503z  
Expand TV Tuner  
12V GROUND  
VHF 45.75MHz-224.25MHz  
UHF 471.25MHz-855.25MHz  
ISO  
8mmMAX  
1. PRECAUTIONS  
• This equipment uses DC 12 V only. Do not  
use this equipment on 24 V vehicles such  
as large trucks.  
Reception  
• If your vehicle is outside the broadcast  
transmission range, the radio waves will  
become weak and reception will deteriorate.  
UHF stations and regional broadcast stations  
• When driving, keep the TV tuner volume  
down to a level where you can hear sounds  
from outside the vehicle.  
output  
a
comparatively weak radio  
transmission, so the reception conditions may  
get worse while driving over a distance of only  
a few kilometers.  
• If a problem occurs such as entry of a  
foreign object, water gets into the tuner, or  
it produces smoke or strange smells, stop  
using the tuner immediately, and consult  
your dealer.  
• The screen image may be disturbed and output  
noise due to train lines, high voltage power  
lines and traffic signal lights.  
Tuner Handling  
• This equipment does not have a display  
function, so the screen will be black during  
driving.  
• Disconnecting the cables while the system is  
operating may cause a system breakdown.  
Always turn off the power (ACC-OFF) before  
you disconnect the cables.  
• If the power supply to the system is stopped  
due to battery replacement, etc., the details  
you have entered into the microcomputer  
memory may be erased and the settings may  
return to the default settings. If this occurs,  
enter your settings again.  
INFORMATION FOR USERS:  
CHANGES OR MODIFICATIONSTOTHIS PRODUCT NOT APPROVED BYTHE MANUFACTURER  
WILL VOID THE WARRANTY.  
2. PACKAGE CONTENTS  
1. TV tuner unit (TTX7503z)  
2. User’s Manual / Installation Manual .................................................................................................. 1  
3. CeNET cable (2.5 m) ......................................................................................................................... 1  
4. RCA video cable (2.5 m) ................................................................................................................... 1  
5. Accessories Bag ................................................................................................................................ 1  
6. PKB connection cable ....................................................................................................................... 1  
4
TTX7503z  
3. SET COUNTRIES LIST  
The TV area function can be used to set the following country areas.  
No.  
0
Set Countries Display Title  
ALBANIA  
1
AUSTRIA  
2
BELGIUM  
3
4
BOSNIA I H  
CZECH  
5
6
DENMARK  
FINLAND  
7
FRANCE  
8
9
GERMANY  
GREECE  
10 HUNGARY  
11 ICELAND  
12 IRELAND  
13 ITALY  
14 MOROCCO  
15 NETHERLNDS  
16 NORWAY  
17 PORTUGAL  
18 RUMANIA  
19 RUSSIA  
20 SLOVAKIA  
21 SLOVENIA  
22 SPAIN  
23 SWEDEN  
24 SWITZERLND  
25 TURKEY  
26 UK  
Note:  
When the TV receiving country is set to France.  
If the TV receiving country has been set to France, the receivable channels range from L5 to L12, 21 to 69  
TTX7503z  
5
4. SPECIFICATIONS  
Reception channels: VHF CCIR 2 to 12 ch[CCIR “LL5 to L12 ch (when receiving country has been  
set to France.) ]  
UHF CCIR 21 to 69 ch  
Antenna input:  
voltage:  
75 unbalanced  
14.4 V  
Grounding:  
Negative terminal grounding  
Power consumption: 0.8 A or less  
External dimensions: 178 mm (Width) 25 mm (Height) 160 mm (Depth)  
Weight:  
0.7 kg  
178mm  
25mm  
* The specifications and design may be subject to change without prior notice due to improvements.  
6
TTX7503z  
5. TROUBLESHOOTING  
The following symptoms may not be the result of a breakdown, so perform the remedy suggested  
below before contacting your Dealer for repairs.  
Symptom  
No power  
Cause  
Remedy  
Wiring is incomplete.  
Check the wiring method in the manual again,  
then connect the wiring properly.  
No image  
Parking brake is not engaged. Check that the parking brake is engaged  
completely.  
Unclear image from  
rear seat monitor  
Image output for front and  
rear is connected in reverse.  
Check the connection method in the manual  
again, then connect the wiring properly.  
Image is unclear  
Poor reception  
The transmission may not be reaching you  
properly because you are in a valley or the  
shadow of a building. Check again at a location  
where the transmission can reach you properly.  
Double or triple image Poor reception  
The image may be affected by transmission  
reflected from  
mountains or buildings. Change your location or  
the reception  
direction.  
Image is spotty or  
striped  
Electrical interference  
Reception may be affected by radio interference  
from another  
vehicle, a train, high voltage or neon signs.  
Check your  
reception again at another location.  
TTX7503z  
7
6. INSTALLATION  
CAUTION  
• Disconnect the battery negative cable before connecting the wiring.  
• If you are making holes in the vehicle body in order to install the unit, first confirm the  
position of pipes, tanks and electrical wiring to avoid contact and interference.  
• When installing the wiring for connection cords on a vehicle equipped with airbags, do  
not install the wiring where it may affect the airbag system.  
• Do not cover the ventilation holes and heat-radiating parts of the tuner.  
Installation Using Screws  
Installation Using Velcro Tape  
1. Apply Velcro tape to the bottom surface of the  
unit.  
1. When using the installation holes at the sides  
of the unit, use M4 8 screws. Using screws  
other than the specified screws may cause a  
malfunction.  
2. Attach the unit to the floor carpet beneath the  
seat.  
2. If you are going to drill holes in the dashboard,  
make sure beforehand that there are no  
harnesses behind the dashboard at that  
position or nearby.  
X A M m m  
8
O
I S  
z
z
H
H
5 M  
. 2  
5
5
- 8  
- 2  
z
M
5
H
H
. 2 4 2  
M
5
2 .  
1 7 4  
. 7  
z
M
5
F
F
H U  
D
H 4 5 V  
N
U
O
R
G
V
1 2  
E x p a n d T V T u n e r  
5 0 3 z  
7
X
T
T
L E D O M  
Chassis  
Max. 8 mm  
7. CAUTIONS ON WIRING  
Pay particular attention to the following points when laying out the cords.  
Keep the unit’s cables as far away as possible from the vehicle’s wiring bundles.  
Keep the unit’s RCA pin cord and the power cord separated as far as possible.  
CAUTION  
• When you have finished connecting the cords, secure them with clamps and insulating  
tape for protection.  
• Make sure that the connection cables will not get caught on burrs and edges of the metal  
parts under the seat. It could damage the cables and cause noise from the unit.  
• To assist safe driving, connect the parking brake connection terminal to the lead wire on  
the lamp side of the parking brake lamp switch.  
8
TTX7503z  
8. WIRING CONNECTIONS  
Connect the unit as follows.  
Notes:  
*1 Connect the cable to the terminal of equipment (center unit) that is connected by connection cables  
(CeNET cable) with the L-shaped terminals.  
*2 Connection requires a CCA-389 conversion cord (RCA3P mini DIN8P) which is sold separately.  
*3 If you are connecting an antenna other than a 4 system diversity antenna, connect it to the MAIN  
terminal on the far right.  
*4 Connect the terminal to the lead wire on the lamp side of the parking brake lamp switch. After  
connection, apply the parking brake, then check that the TV displays an image.  
• If the PKB cable is not connected to the side brake, some units may not operate.  
For connection of the monitor (such as the Clarion VRX633R, sold separately).  
For connection of the rear seat monitor (sold separately).  
For connection of the Clarion CD changer (sold separately) for CeNET use.  
To parking brake  
Supplied PKB cable  
Terminal (4) for connection  
to parking brake.  
This unit (TTX7503z)  
Supplied CeNET cable (1)  
Antenna main (MAIN) terminal  
For connection of a video appliance (2)  
For connection (3) of a Clarion  
antenna such as ZCP-104 (sold  
separately).  
such as a handy camera (sold separately).  
For connection of a Clarion CCD camera (sold separately).  
* For connection of VRX633R, connect the CCD camera to the  
NAVI/CCD terminal of VRX633R.  
Main unit (such as the Clarion VRX633R)  
NAVI/CCD terminal.  
Supplied RCA video cable (1)  
TTX7503z  
9
Clarion Co., Ltd.  
All Rights Reserved. Copyright in © 2005:Clarion Co., Ltd.  
280-8225-00  
Printed in Japan / Imprimé au Japon / Gedruckt in Japan / Stampato in Giappone  
Gedrukt in Japan / Impreso en Japón / Tryckt i Japan / Impresso no Japão  
2005/2 (D•K)  
ZT-4651E  

Addonics Technologies DGBRC1 User Manual
Aiphone Camera Accessories KCW M User Manual
Canon Camcorder HF G30 User Manual
Clarion VXZ758R User Manual
Crown Boiler AWI195 User Manual
Crown Boiler BSI172 User Manual
Datexx FINANCIAL DH 180FS User Manual
GE MONOGRAM ZX36CTYSS User Manual
Hypertec Blue BacPac Campus N13268PHY User Manual
JL Audio C2 600x User Manual