Clarion ProAudio VRX 935VD VRX935VD User Manual

Owner’s manual & Installation manual

사용 설명 및 설치 설명서

AM/FM DVD VIDEO / VIDEO CD / CD / MP3

PLAYER / CD CHANGER CONTROLLER WITH

7" LC DISPLAY

帶７英寸液晶顯示器調幅 (AM)/調頻 (FM)

DVD VIDEO/VIDEO CD/CD/MP3播放機 / CD

換片機控制器

7인치 LC 디스플레이 화면의 AM/FM

DVD 비디오/비디오 CD/CD/MP3 플

레이어 / CD 체인저 컨트롤러

Clarion Co., Ltd.

QC-6810K

280-7947-00

Printed in Japan/ 在曰本印刷/일본에서 인쇄하였음.

2002/12 (A·K)

Handling Discs

5. DISPLAY

2. PRECAUTIONS

Handling

Storage

The Color LCD Display and the Information Panel on the main unit show the following displays, pro-

viding information about the mode and functions operated.

• New discs may have some roughness around

the edges. If such discs are used, the player

may not work or the sound may skip. Use a

ball-point pen or the like to remove any rough-

ness from the edge of the disc.

• Do not expose discs to direct sunlight or any

heat source.

WARNING

•

Do not expose discs to excess humidity or dust.

Do not expose discs to direct heat from heaters.

For your safety, the driver should not watch the TV or operate the controls while driving.

Please note that watching and operating the TV while driving are prohibited by law in

some countries. Also, while driving, keep the volume to a level at which external sounds

can be heard.

Information Panel

Ball-point pen

Cleaning

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the cen-

ter of the disc to the circumference.

Preset channel indication

Disc number indication

∗The disc numbers corresponding to the

discs in the DVD, CD or MD changer

light.

1. When the inside of the car is very cold and

Roughness

INFORMATION FOR USERS:.

the player is used soon after switching on the

CHANGES OR MODIFICATIONS TO THIS

heater, moisture may form on the disc (DVD/

PRODUCT NOT APPROVED BY THE MANU-

CD/MD) or the optical parts of the player and

FACTURER WILL VOID THE WARRANTY.

proper playback may not be possible. If

moisture forms on the disc (DVD/CD/MD),

wipe it off with a soft cloth. If moisture forms

on the optical parts of the player, do not use

the player for about one hour. The condensa-

tion will disappear naturally allowing normal

operation.

• Do not use any solvents, such as commer-

cially available cleaners, anti-static spray, or

thinner to clean discs.

Operation status indication

∗The frequency, play time,

clock, etc. are displayed.

• After using special disc cleaner, let the disc

dry off well before playing it.

• Never stick labels on the surface of the disc or

mark the surface with a pencil or pen.

• Never play a disc with any cellophane tape or

other glue on it or with peeling off marks. If

you try to play such a disc, you may not be

able to get it back out of the DVD player or it

may damage the DVD player.

On Discs

• Exercise a good precaution when loading a

disc with the panel open.

• Never turn off the power and remove the unit

from the car with a disc loaded.

2. Driving on extremely bumpy roads which

cause severe vibration may cause the sound

to skip.

• Do not use discs that have large scratches,

are misshapen, cracked, etc. Use of such

discs may cause misoperation or damage.

CAUTION

With the screen open, a driver may not see the

disc insertion slot. For your safety, insert a disc

with the screen closed.

3. This unit uses a precision mechanism. Even

in the event that trouble arises, never open

the case, disassemble the unit, or lubricate

the rotating parts.

• To remove a disc from its storage case, press

down on the center of the case and lift the

disc out, holding it carefully by the edges.

: Manual indication

: Stereo indication

: Disc indication

• Do not use commercially available disc pro-

tection sheets or discs equipped with stabiliz-

ers, etc. These may damage the disc or cause

breakdown of the internal mechanism.

: Loudness indication

: Scan indication

4. TV broadcast reception

: Repeat indication

: Random indication

: Beat-EQ indication

When receiving the TV broadcasts, the

strength of the signals changes since the car

is moving, so in some cases it may not be

possible to receive clear pictures.

• TV signals are strongly linear, so reception is

affected by buildings, mountains and other

obstacles.

• Such external factors such as electric train

lines, a high voltage lines, and signal devices

may disturb the picture or cause noise.

∗ If the reception is poor, switch to a station

with good reception.

Be sure to unfold and read the next page.

請務必打開并閱讀下一頁。

이 페이지를 펼친 채로 다음 페이지를 읽어 보십시오.

VRX935VD

When the display open

3. CONTROLS / 控制部分 / 컨트롤

4. NOMENCLATURE

[a], [d] button

[DISP] button

• Use this button to tune to a station in the ra-

dio/TV mode.

• Press and hold this button for 1 second or

longer to call the LCD background screen

setup menu.

Main unit / 主機 / 본체

Names of Buttons

Note:

• Use this button to select a track in the CD,

Video CD, MP3 and CD/MD changer mode.

• Use this button to select a chapter in the DVD

video and DVD changer mode.

With the Display closed / 顯示屏處于關合狀態 / 디스플레이가 닫혀져 있을때

• Press this button to show the information on

the screen in the TV, VISUAL, or DVD video

mode.

• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).

[

]

[

]

DISP

VOL

• Press and hold this button for 1 second or

longer to switch the display sizes while in the

screen where the TV, VISUAL, or DVD video

mode is suspended.

When the display closed

[M.L] button

• The display panel can be switched to a com-

posite screen to lock the monitor.

• Press and hold this button for about 1 second

or longer to turn off the monitor.

[

]

OPEN

[VOL] button

• Use this button to increase/decrease the vol-

ume.

[DIRECT] button

• Use this button to select a preset channel in

the radio/TV mode.

• Use this button to select a disc in the changer

mode.

• Press and hold one of the [DIRECT] button for

2 seconds or longer to store the current sta-

tion into preset memory.

[Q]

[

]

RELEASE

[

]

[

]

[DISP] button

• Use this button to switch the indications such

as play status on the information panel.

SENSOR

FUNC

[TILT] button

• Use this button to adjust the angle of the liquid

crystal panel in 5 steps.

• Every time this button is pressed and held for

about 2 seconds or longer, the liquid crystal

panel moves forward/backward in 3 steps.

[

]

[

]

ISR

[

]

DIRECT

BAND

[OPEN] button

• Use this button to open/close the liquid crystal

panel.

• Press and hold this button for about 2 sec-

onds or longer so that the liquid crystal panel

is positioned horizontally when the liquid crys-

tal panel is open. Press the button again to re-

turn the panel to the original position. Even if

the button is not pressed, the panel returns to

the original position after about 10 seconds.

[

]

MUTE

[s]

[a], [d] button

• Use this button to tune to a station in the ra-

dio/TV mode.

[s] button

•

Press this button to enter the play pause mode

in the DVD video mode and changer mode.

Press the button again to resume playback.

• Use this button to select a track in the CD,

Video CD, MP3 and CD/MD changer mode.

• Use this button to select a chapter in the DVD

video and DVD changer mode.

With the Display open / 顯示屏處于打開狀態 / 디스플레이가 열려져 있을때

[

]

DISP

[A-M] button

• Shows the AUDIO MODE menu for tone ad-

justment, etc. Press and hold this button for 1

second or longer to switch the loudness on or

off (LOUD ON/OFF).

[s] button

• Press this button to enter the play pause

mode in the DVD video mode and changer

mode. Press the button again to resume play-

back.

[RELEASE] button

• Use this button to remove the DCP from the

main unit.

[ADJ] button

• Shows the ADJUST MODE menu to change

the settings.

• Press and hold this button for 1 second or

longer to show the DVD SETUP menu.

[SENSOR]

• Remote control infrared sensor.

[BND] button

• Press this button to switch the receiving

bands for radio/TV mode, etc. Press and hold

this button for 1 second or longer to switch the

SEEK/MANUAL tuning modes.

[

]

LIST

[ISR] button

• Use this button to enter the ISR (Instant sta-

tion recall) standby mode.

[KEY PAD] button

• Press to display the keys (KEY PAD) that cor-

respond to play mode.

[

]

[

]

M.L

• Use this button to move to the first track on a

disc in the DVD video mode.

• Use this button to switch to the next disc in

the changer mode.

• Use this button to select visual1 or 2 in the VI-

SUAL mode.

[MUTE] button

• Use this button to mute the sound.

[MENU] button

[

]

TILT

• Press this button to show the DVD menu on

the screen in the DVD video and DVD

changer mode.

[FUNC] button

• Press this button to show the file selection

screen in the MP-3 mode.

• Press and hold this button for 1 second or

longer to show the DVD title screen.

• Press this button to turn on the power. Press

and hold this button for 1 second or longer to

turn off the power.

• Press this button to switch the modes such as

radio.

[

]

[

]

KEY PAD

[LIST] button

[

]

[

]

ADJ

A-M

• Press this button to show the list of the preset

channel on the screen in the radio/TV mode.

• Press this button to show the disc list on the

screen in the CD/MD/DVD changer mode.

[Q] button

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

注意﹕在閱讀每一章時，請務必打開本頁，并參照本頁的前視圖。

참고:이 페이지를 펼쳐두고, 각 장을 읽을때 전면 그림을 참조하도록 하십시오.

• Use this button to eject a disc.

VRX935VD

Color LCD Display

•Radio mode

: FM1 98.10MHz Pch 1(band/frequency/preset No.)

•DVD changer mode: D2 T02 C002 01:08:20

(disc No./title No./chapter No./ playback time)

•DVD video mode : T01 C003 00:08:20(title No./chapter No./playback time)

•Video CD mode : T01 00:01:18(track No./playback time)

•MP-3 mode

•CD mode

: F001 T001 00:04:07(folderNo./track No./playback time)

: TRACK 02 04 : 07(track No./playback time)

•CD/MD changer mode: D02 T02 00 : 45(disc No./track No./playback time)

•TV mode

•VISUAL mode

: TV1 28CH Pch 1(band/channel/preset No.)

: VISUAL 1 (band)

MOTION/SPRITE

pattern display

Clock time

: Seek/Manual indication

: Stereo indication

: Loudness indication

MANU

Mode name

When the 5.1ch Surround Decoder (DVH920) is

connected, the program format of the digital input

signal (for example, “3/2+LFE”) is displayed.

: Beat-EQ indication

BEQ

When the 5.1ch Surround Decoder (DVH920) is

connected, the signal format of the digital input

signal (for example, “Dolby D”) is displayed.

•Radio/TV mode

: PROGRAM WEST COAST (user title)

•CD changer mode

: USER TITLE SHINE (user title)

•CD TEXT in CD changer mode

: DISC TITLE SHINE (disc title)

: TRACK TITLE Time has come (track title)

: ARTIST Time has come (artist)

•MD changer mode

: DISC TITLE SHINE (disc title)

: TRACK TITLE Time has come (track title)

VRX935VD

OUTLINE OF BUTTON AND TOUCHKEY

OPERATION WHEN THE DISPLAY IS OPEN

∗1

∗2

∗3

Note:

• The background of some screens in the following

sections have been simplified to make it easier to

see the keys in each procedure.

∗1: The STANDARD screen indication in the ra-

dio mode

∗2: Press an operation button to switch the STAN-

DARD screen.

The operation button is [FUNC] button in the

description of operation per mode.

∗4

FUNCTION

∗3: Touch the screen and the menu screen corre-

∗5

sponding to the play mode is displayed.

∗4: Touch an operation key to switch the menu

screen.

The operation key is [FUNCTION] key in the

description of operation per mode.

∗5: Touch the [RTN] key to return to the previous

screen.

∗6: Touch the [ ] key to go to the next menu.

DVD PLAYER

∗7: Touch the [ ] key to return to the previous

menu.

∗5

∗8: This icon [

] is displayed to indicate that the

button should be held down for 1 second or

longer.

VRX935VD

∗8

(ADJUST MODE menu)

(DVD SETUP menu)

∗6

∗7

STOP

CLOCK

∗6

PARENTAL LEVEL

VRX935VD

(AUDIO MODE menu)

(KEY PAD)

BASS BOOST

DETAIL

∗9

ENT

EQ LEVEL

VRX935VD

∗10

∗8

(MOTION/SPRITEmenu)

(DVD video menu)

SPRITE

∗11

WALL COLOR

ENT

Notes:

∗10: Use this button during DVD, video CD and

∗8: This icon [

] is displayed to indicate that

MP-3 playback.

the button should be held down for 1

second or longer.

∗11: When the KEY PAD is difficult to view,

press the touch key on the right (left) side

of the screen to move it to the other side of

the screen.

∗9: This shows a KEY PAD selection example

in the radio mode when 98.10 MHz is

selected.

VRX935VD

7. REMOTE CONTROL

Remote control unit

Signal transmitter

Operating range: 30˚ in all directions

[

]

CeNET

[

]

BAND

[

]

MUTE

[

]

FUNC

VOLUME

[

]

[

]

P.TIME

0-9

]

[

]

DISC SEL

[

]

[

],[

[

]

SEARCH MODE

[

]

RTN

[

]

TITLE

[

]

SET UP

[

],[

]

[

ENT

[

],[

[

]

[

],[

]

[

]

PBC

SCAN

]

[

]

RDM

RPT

[

]

[

]

AUDIO

SLOW

]

[

ANGLE

SUB TITLE

Inserting the Batteries

1.Turn the remote control unit over, then slide the

rear cover in the direction of the arrow.

AA (SUM-3, IECR-6/1.5V)

Batteries

2.Insert the AA (SUM-3, IECR-6/1.5V) batteries

that came with the remote control unit facing in

the directions shown in the figure, then close the

rear cover.

Notes:

Using batteries improperly can cause them to

explode. Take note of the following points:

Rear cover

• When replacing batteries, replace both batteries

with new ones.

• Do not short-circuit, disassemble or heat batteries.

• Do not dispose of batteries into fire or flames.

• Dispose of spent batteries properly.

Rear side

VRX935VD

Functions of Remote Control Unit Buttons

• Press to return to the first track in CD/MP-3

mode or video CD mode with the PBC

function turned off.

GShared modes

[FUNC] button

• Press and hold this button for 1 second or

longer to turn on or off the power. Power on/

off, switches among radio, TV, etc.

[P.TIME] button

• Press to turn on and off the playtime display in

the DVD video and video CD mode.

• Press and hold this button for 1 second or

longer to switch the playback status display

contents.

[VOLUME] button

• Increases and decreases volume.

[MUTE] button

• Turns mute on and off.

[ß] button

• Press to stop video playback in DVD video

and video CD mode.

[CeNET] switch

• For operating this unit, switch this switch to

the CeNET position.

[s] button

• Press to play or pause video and audio

media.

GRadio/TV mode

[0 - 9] button

• Press to enter DVD video chapters in the KEY

PAD screen.

[BAND] button

• Switches reception band.

• Press to set the track number of the Video CD

with the PBC function turned off, CD track

number or MP-3 track number in the KEY

PAD screen.

[0 - 9] button

• Use in the KEY PAD operation screen to set

the radio frequency and TV channels.

[DISC SEL] button

[SEARCH MODE] button

• Press to display the KEY PAD operation

screen.

• Press to display the P.CH SELECT screen.

[SEARCH MODE] button

• Press to display the KEY PAD operation

screen.

[RTN] button

• Press to switch the screen display while the

MENU screen is being displayed. However, it

may occur that this button operation dose not

work on some discs.

[ENT] button

• Press to confirm numerics entered in the KEY

PAD operation screen.

[MENU] button

[

], [

] buttons

• Press to display menu stored on video disc.

• MP3: Returns the cursor to the default

position and displays the files (track) select

screen.

• Press to select the next higher or lower preset

channel in radio and TV mode.

[A], [D] button

• Press to select the next higher or lower

frequency in radio and channel in TV mode.

[SET UP] button

• Press to display the menu for setting audio

features during DVD video playback.

• Press and hold this button for 1 second or

longer to show the DVD SETUP menu.

∗ If you want to select a menu after the SETUP

menu is displayed, touch the operation keys on

the menu screen.

[SCAN] button

• Press to perform preset scans in the radio and

TV modes.

• Hold down to perform the auto store operation

in the radio and TV modes.

[TITLE] button

GDVD player mode

• Press to display the title screen on DVD video

discs. Some discs do not display the title

screen.

[BAND] button

• Press to return to the first chapter in DVD

video mode.

VRX935VD

Functions of Remote Control Unit Buttons

[w], [z], [Å], [Î] button

[SLOW] button

• Press to perform slow playback in DVD video

or video CD mode.

• Press to select menus and other items during

DVD video/MP-3 playback.

[ENT] button

• Press to confirm numerics entered in the KEY

PAD operation screen.

GCD/MD changer mode

[BAND] button

• Press to switch discs.

[

] [

] buttons

• Press to select the next higher or lower

chapter number in DVD video mode.

[DISC SEL] button

• Used to change the disc.

• Press to select the next higher or lower track

numbers in CD/MP-3 mode or video CD mode

with the PBC function turned off.

[s] button

• Press to play and pause the media.

[A] [D] button

[0 - 9] buttons

• Press to enter track numbers in the KEY PAD

screen.

• Hold down to perform fast-forward and fast-

backward.

[SCAN] button

[SEARCH MODE] button

• Press to display the KEY PAD operation

screen.

• Press to perform chapter scans in DVD video

mode and track scans in CD mode. Press to

perform track scan and hold down to perform

folder in MP-3 mode.

[

] [

] buttons

• Press to select the next higher or lower

playback track.

[RPT] button

• Press to perform chapter repeat in DVD video

mode and track repeat in CD mode. In the

MP-3 mode, press to perform track repeat and

hold down to perform folder repeat.

[A] [D] button

• Hold down to perform fast-forward and fast-

backward.

[RDM] button

[SCAN] button

• Press to perform track scan and hold down to

perform disc scan.

• Press to play tracks at random in CD mode. In

the MP-3 mode, press to play tracks at random

and hold down to play folders at random.

[RPT] button

• Press to perform track repeat and hold down

to perform disc repeat.

[PBC] button

• Press to turn on and off the PBC function in

video CD mode.

If the button is pressed and held for 5 seconds

or longer, the DVD video player parameter

settings are returned to the factory default

settings.

[RDM] button

• Press to play tracks at random and hold down

to play folders at random.

[AUDIO] button

• Press to switch on the AUDIO function in DVD

video and video CD modes.

GDVD changer mode

[BAND] button

• Press to switch discs.

[SUB TITLE] button

• Press to display subtitles in DVD video mode.

[DISC SEL] button

• Used to change the disc.

[ANGLE] button

• Press to turn the ANGLE function on and off in

DVD video mode. (This button is available

only on multiple angles DVDs.)

∗ Other button operations in this mode are

the same as those in DVD player mode.

VRX935VD

8. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

2. Press the right side of the DCP carefully to fit

it in place.

We recommend taking the DCP with you when

leaving the car.

Removing the DCP

1. Turn the power off.

DCP

2. Slide the [RELEASE] lever leftward to

release the DCP/Operation Panel.

3. Press the [FUNC] button to turn on the

power.

CAUTION

• The DCP can easily be damaged by shocks.

After removing it, be careful not to drop it or

subject it to strong shocks.

DCP

• If the Operation Panel is kept open, the DCP

may drop due to vibration of the car. This

results in damage to the DCP. So close the

Operation Panel or remove the DCP to store

into the case.

3. Pull the DCP toward you and remove it.

• The DCP is an extremely important part. Be

careful not to damage it by pressing on it with

fingernails, screwdrivers, etc.

• In case the Control Panel is kept open

When you detach the DCP, the panel is to be

stored automatically after a warning sound.

When you attach the DCP, the panel is to

come out to its original position after a

warning sound.

DCP

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

Attaching the DCP

1. Insert the DCP so that the A section on the

left side of the DCP catches on the hook B

on the unit.

DCP

VRX935VD

9. CAUTIONS ON HANDLING

LCD panel/Generalities

For a longer service life, be sure to read the following cautions.

• Be sure to store the LCD panel inside the

main unit when parking the car outdoors for

long period of time. The LCD panel will

operate properly in a temperature range of 0

to 60˚C.

• Do not place anything on the display when the

panel is tilted.

• The remote controller may not work if the

remote control sensor is exposed to direct

sunlight.

• Don’t allow any liquids on the set from drinks,

umbrellas etc. Doing so may damage the

internal circuitry.

• In extremely cold weather, the display

movement may slow down and the display

may darken, but this is not a malfunction. The

display will work normally when the

temperature increases.

• Do not disassemble or modify the set in any

way. Doing so may result in damage.

• Do not draw the LCD panel out and use it as a

tray. Also, subjecting the LCD panel to shocks

may result in breakage, deformation or other

damage.

• Small black and shiny spots inside the LCD

panel are normal for LCD products.

• The LCD panel may stop temporarily when it

opens or closes, when the engine stops or

when it is cold.

• Do not let cigarettes burn the display. Doing

so may damage or deform the cabinet.

• The touchkeys on the display operate when

slightly touched. Do not press the touchkey

screen with much force.

• If a problem should occur, have the set

inspected at your store of purchase.

• Do not insert objects or poke in the space

between the LCD panel and the main unit

when the panel is tilted.

• Do not push the case surrounding the

touchkey panel with much force. This may

cause malfunctioning of the touchkeys.

Cleaning

• Cleaning the cabinet

• Cleaning the LCD panel

Use a soft, dry cloth and gently wipe off the

dirt. For tough dirt, apply some neutral

detergent diluted in water to a soft cloth, wipe

off the dirt gently, then wipe again with a dry

cloth.

The LCD panel tends to collect dust, so wipe

it off occasionally with a soft cloth. The

surface is easily scratched, so do not rub it

with hard objects.

Do not use benzene, thinner, car cleaner, etc.,

as these substances may damage the cabinet

or cause the paint to peel. Also, leaving

rubber or plastic products in contact with the

cabinet for long periods of time may cause

stains.

VRX935VD

10. DVD VIDEO SYSTEM

DVD video is a high-quality digital video source

Multi-story function

that provides crisp and clear images. One 12

cm disc contains either one film or four hours of

music.

When a DVD video contains more than one

story for a film, you can select the story you

wish to enjoy. The operation procedures vary

with the disc; observe the instructions for

selecting a story provided during playback.

DVD Video Features

This unit provides the following functions in

addition to the high image quality and sound

quality of DVD video.

Dolby digital

Dolby digital enables up to 5.1 independent

multi-channel audio reproduction, the same type

of surround system that is also used in movie

theaters.

Notes:

• The functions described in the section,

“Features”, for example, the recorded language,

subtitles, angles, etc. differ with the DVD video

disc. Refer to the instructions provided with the

DVD video.

• Some disc functions may operate differently than

described in this manual.

DTS

DTS (Digital Theater System) is a digital sound

compression technique developed by Digital

Theater Systems, Inc.

This low sound compression format delivers a

large amount of data and makes it possible to

reproduce a high quality sound.

Multi-sound function

DVD video can store up to 8 languages for one

film; select the language of your preference.

• The languages stored on the disc are

indicated by the icon shown below.

Menu screens

Menus can be called up during DVD video

playback to perform menu setting.

• Example showing menu display

Multi-angle function

A DVD video that is filmed from multiple angles

allows you to select the angle of choice.

• The number of recorded angles are indicated

by the icon shown below.

Subpicture (subtitles) function

A DVD video can record subtitles for up to 32

languages and you can select the language of

the subtitles you wish to see.

• The number of recorded subtitle languages

are indicated by the icon shown below.

VRX935VD

TV color system

Discs

This DVD player plays NTSC discs and PAL

discs only and cannot be used for playback of

SECAM discs.

Playable discs

This DVD video player can play the following

discs.

About MP3 playback

This unit can play back CD-R/CD-RW discs on

which MP3 music data have been recorded.

Playable discs

DVD video discs

Audio CDs

video CDs

CD TEXT

For a detailed information, see the page entitled

“Listening to an MP3”.

About the registered marks etc.

• This product incorporates copyright protection

technology that is protected by method claims

of certain U.S. patents and other intellectual

property rights owned by Macrovision

Corporation and other rights owners. Use of

this copyright protection tecnology must be

authorized by Macrovision Corporation, and is

intended for home and other limited viewing

uses only unless otherwise authorized by

Macrovision Corporation. Reverse

About CD Extra discs

A CD Extra disc is a disc in which a total of two

sessions have been recorded. The first session

is Audio session and the sedond session Data

sessioin.

Your personally-created CDs with more than 2

data sessions recorded cannot be played on

this DVD video player.

engineering or disassembly is prohibited.

• Manufactured under license from Dolby

Laboratories.

Discs that cannot be played back

This DVD video player cannot play back DVD-R,

DVD-RAM, DVD-ROM, CD-ROM, Photo CDs.

“Dolby” and the duble-D symbol are

trademarks of Dolby Laboratories.

• Some CDs recorded in CD-R or CD-RW mode

may not be usable. (Cause: disc

• “DTS” is a registered trademark of Digital

characteristics, cracks, dust/dirt, dust/dirt on

player’s lens, etc.)

Theater Systems, Inc.

Note on region numbers

The DVD video system assigns a region number

to DVD video players and DVD discs by sales

area.

The DVD video region number is marked on the

disc jacket as shown below.

(Oceania)

ALL

(Asia)

ALL

VRX935VD

11. OPERATIONS

Note: Be sure to read this chapter referring to the front diagrams of

chapter “3. CONTROLS” on page 5 (unfold).

Basic Operations

Adjusting the volume

CAUTION

1. Operate the [VOL] button in the direction of

the + (up) or – (down) to adjust the volume;

When the unit is turned on, starting and

stopping the engine with its volume raised to

the maximum level may harm your hearings.

Be careful about adjusting the volume.

+ : Increases the volume.

– : Decreases the volume.

∗ The volume level indicated in the display is in a

range from 0 (minimum) to 33 (maximum).

Note:

• Use this unit after starting the engine.

ACC or engine

ON position

CAUTION

While driving, keep the volume at a level at

which external sounds can be heard.

Turning on and off the power

Note:

Switching the display

When the panel is closed:

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [DISP] button to select the desired

display.

Each time you press the [DISP] button, the

display switches in the following order:

1. Press the [FUNC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

MAIN Display

3. Press and hold the [FUNC] button for 1

second or longer to turn off the power for the

unit.

SUB Display

Note:

• About the “SYSTEM CHECK”

Clock Time Display

The confirmation of connected equipment must

be performed for this unit only when the wiring

connection is complete and power is turned on to

the unit first. When the power is supplied, “PUSH

PWR” appear in the display. Press the [FUNC]

button, the system check starts inside the unit.

When “COMPLETE” and “PUSH PWR” appear

alternately, press once again the [FUNC] button.

MAIN Display

Notes:

• Once selected, the preferred display becomes the

default display. When a function adjustment such

as volume is made, the display momentarily

switches to that function’s display, then returns

back to the preferred display several seconds

after the adjustment.

Selecting a mode

1. Press the [FUNC] button to change the mode

of operation.

• If a title has been input, it is shown in the SUB

display. If no title has been input, “NO TITLE”

appears in the display. To input a title, refer to the

subsection “Entering titles” in “Other Functions”

section.

• For CD, MD and TV, some special characters of

the title will not be displayed on the Information

Panel of the DCP. In this case, those characters

will only be left blank.

2. Each time you press the [FUNC] button, the

mode of operation changes in the following

order:

Radio mode ➜ DVD mode ➜ CD changer

mode ➜ MD changer mode ➜ DVD changer

mode ➜ TV mode ➜ VISUAL mode ➜ Radio

mode...

∗ External equipment not connected with

CeNET is not selected.

VRX935VD

Basic Operations

Opening and turning the display

WARNING

• To prevent the battery from going dead,

operate this unit with the engine

running, if possible.

Adjusting the angel, etc. of the

liquid crystal panel

The angle of the liquid crystal panel or

protruding amount of the panel from the

mounting surface can be adjusted depending on

the mounting angle of the unit or light coming

into the car.

• When the liquid crystal panel is operating,

be careful not to get your hand or finger

caught between the panel and main unit

or the instrument panel of the car.

G To adjust the angle

1. Every time the [TILT] button is pressed, the

liquid crystal panel tilts forward or backward

at up to about 20 degrees. The adjusted

angel is stored in memory.

Standing up the liquid crystal panel

1. Press the [OPEN] button and the liquid

crystal panel comes out and stand up

automatically.

Note:

• Do not move the liquid crystal panel by hand.

∗ While the liquid crystal panel is opening or

closing, the LED of the [FUNC] button blinks.

G To adjust the slide position

1. Press and hold the [TILT] button and release

Note:

when a beep is heard.

• If the liquid crystal panel stops in the middle of its

operation, press the [OPEN] button to house the

panel and press the button again to stand it up.

The unit enters the same display mode as the

display was turned off the last time.

The liquid crystal panel slides forward or

backward. The adjusted slide position is

stored in memory.

* There are 3 adjustable positions available on

this panel.

Housing the liquid crystal panel

1. Press the [OPEN] button and the liquid

crystal panel is housed automatically.

Note:

• When leaving this unit unused for a long period of

time or leaving your car, be sure to house the

liquid crystal panel into the main unit.

VRX935VD

Basic Operations

3. When the setting is finished, touch the [RTN]

key or press the [A-M] button to return to the

previous mode.

Turning the liquid crystal panel

horizontal (Air conditioner

operation mode)

When the way the liquid crystal panel is

mounted hinders the operation of the air

conditioner, the position of the panel can be

turned horizontal temporarily.

When the Beat EQ (BASS BOOST, IMPACT,

EXCITE, USER CUSTOM) is set, “B.EQ”

appears in the display.

Note:

• When the separately-sold 5.1ch Surround

Decoder (DVH920) is used, the bass and treble

tone adjustments cannot be made. To adjust the

tone, refer to the section “5.1ch Surround

Decoder Operations”.

1. Press and hold the [OPEN] button when the

liquid crystal panel is upright, and release the

button when a beep is heard.

2. The liquid crystal panel turns horizontal.

∗ Press the [OPEN] button again when the

liquid crystal panel is in the horizontal position,

and the panel returns to the original position.

Adjusting the non fader output

volume

∗ Even if the button is not operated for about 10

seconds, the panel returns to the original

position with a warning sound.

You can adjust the volume output from the unit’s

non fader output terminal.

1. Press the [A-M] button, then touch the

[DETAIL] key.

Turning on and off the monitor

1. Pressing and holding the [M.L] button for 1

second or longer turns the monitor off. To

return to the monitor on, press the [M.L]

button once again.

2. Touch the [NON-FAD VOL] key.

3. Touch the [w] or [z] key to adjust to

desirable level.

∗ The factory default setting is “0”. (Setting

range: –6 to 6)

∗ When a button is pressed or during security

monitoring, the monitor-off mode is canceled.

4. When the adjustment is complete, touch the

[RTN] or press the [A-M] button to return to

the previous mode.

Mute

1. Each time you press the [MUTE] button,

mute is turned on and off. “MUTE” appears

when mute is turned on.

Adjusting the bass

The bass gain, bass frequency (center

frequency) and bass Q can be adjusted as

follows.

Setting the Beat EQ

• This function is enabled only when the panel is

open.

1. Press the [A-M] button, then touch the

[USER CUSTOM] key.

2. Touch the [DETAIL] key, then touch the

This unit comes with 3 types of sound tone

effect stored in memory. Select the one you

prefer.

∗ The factory default setting is “USER CUSTOM”.

1. Press the [A-M] button to change into the

[BASS] key.

3. When the bass type selection screen is

displayed, touch the key for the desirable

type to select it.

4. Touch the [w] or [z] key to adjust to

AUDIO MODE menu.

desirable level.

2. When the AUDIO MODE menu is displayed,

touch the key for the desirable type to select it.

GAIN : –6 to 8 (The factory default setting

is “0”)

• BASS BOOST : bass emphasized

FREQ. : 50Hz/80Hz/120Hz (The factory

• IMPACT

: bass and treble

emphasized

default setting is “50”)

: 1/1.25/1.5/2 (The factory default

• EXCITE

: bass and treble

emphasized mid de-

emphasized

setting is “1”)

5. When the adjustment is complete, touch the

[RTN] key several times or press the [A-M]

button to return to the previous mode.

• USER CUSTOM: user custom

• TONE BYPASS : no sound effect (Beat EQ

off)

VRX935VD

Basic Operations

∗ The factory default setting is “0”. (Adjustment

Adjusting the MID

The MID gain, MID frequency (center

frequency) and MID Q can be adjusted as

follows.

range: front 13 to rear 13)

[w] key: Emphasized the sound from the

front speakers.

[z] key: Emphasized the sound from the

1. Press the [A-M] button, then touch the

rear speakers.

[USER CUSTOM] key.

4. Touch the [Å] or [Î] key to adjust to the

2. Touch the [DETAIL] key, then touch the

balance level.

[MID] key.

∗ The factory default setting is “0”. (Adjustment

range: left 12 to right 12)

3. When the bass type selection screen is

displayed, touch the key for the desirable

type to select it.

[Å] key : Emphasized the sound from the left

speakers.

4. Touch the [w] or [z] key to adjust to

[Î] key : Emphasized the sound from the

desirable level.

right speakers.

GAIN : –6 to 6 (The factory default setting

5. When the adjustment is complete, touch the

[RTN] key several times or press the [A-M]

button to return to the previous mode.

is “0”)

FREQ. : 700Hz/1kHz/2kHz (The factory

default setting is “1k”)

: 1.5/2 (The factory default setting is

“2”)

Adjusting the Beat EQ

1. Press the [A-M] button and select “BASS

BOOST or IMPACT or EXCITE”.

5. When the adjustment is complete, touch the

[RTN] key several times or press the [A-M]

button to return to the previous mode.

2. Touch the [DETAIL] or [LEVEL] key to

display the level adjustment screen.

3. Touch the [w] or [z] key to adjust to

Adjusting the TREBLE

desirable level.

The treble gain and treble frequency (center

frequency) can be adjusted as follows.

∗ When BASS BOOST is selected, you can

adjust the bass in the range of –3 to 3.

1. Press the [A-M] button, then touch the

∗

When IMPACT and EXCITE is selected, you

can adjust the bass and treble in the range of –

3 to 3.

[USER CUSTOM] key.

2. Touch the [DETAIL] key, then touch the

[TREBLE] key.

4. When the adjustment is complete, touch the

[RTN] key several times or press the [A-M]

button to return to the previous mode.

3. When the bass type selection screen is

displayed, touch the key for the desirable

type to select it.

4. Touch the [w] or [z] key to adjust to

Turning on/off the loudness

The loudness effect emphasizes the bass to

create a natural sound tone. When you are

listening to music at a low volume, it is

recommended to use the loudness effect.

desirable level.

GAIN : –6 to 6 (The factory default setting

is “0”)

FREQ. : 8kHz/12kHz (The Factory default

setting is “12K”)

1. Press and hold the [A-M] button for 1 second

or longer to turn on the loudness effect.

When the loudness effect is turned on, “LD”

lights in the display.

5. When the adjustment is complete, touch the

[RTN] key several times or press the [A-M]

button to return to the previous mode.

2. Press and hold the [A-M] button for 1 second

or longer to turn off the loudness effect. “LD”

goes off in the display.

Adjusting the balance/fader

1. Press the [A-M] button, then touch the

[DETAIL] key.

2. Touch the [BAL/FAD] key.

3. Touch the [w] or [z] key to adjust to the

fader level.

VRX935VD

Basic Operations

Radio Operations

Changing the setting of the display

background

FM reception

For enhanced FM performance the

tuner includes signal actuated stereo control,

Enhanced Multi AGC, Impulse noise reduction

curcuits and Multipath noise reduction circuits.

WARNING

Perform the setting of this function only

when the car is stopped and the parking

brake is applied.

Changing the reception area

This unit is initially set to USA frequency

intervals of 10kHz for AM and 200kHz for FM.

When using it outside the USA, the frequency

reception range can be switched to the intervals

of 9 kHz for AM and 50 kHz for FM.

1. Press the [DISP] button for 1 second or

longer to show the background setup menu.

∗ This menu appears only during Radio and

DVD (with CD, MP3), CD/MD changer mode,

and when the car is moving.

GSetting the reception area

2. Touch the setting key to show the setup

display.

1. While pressing [DISP] button, each time you

press and hold the number “6” of the

[DIRECT] buttons for 2 seconds or longer,

the reception area switches from inside the

USA to outside the USA or from outside the

USA to inside the USA.

GTo set up the motion pattern

2-1. Touch the [MOTION] key to set a

desired motion pattern.

2-2. Touch a desired MOTION PATTERN.

GTo set up the sprite pattern

∗ Any station preset memories are lost when the

reception area is changed.

2-1. Touch the [SPRITE] key to set a desired

sprite pattern.

Listening to the radio

2-2. Touch a desired SPRITE PATTERN.

1. Press the [FUNC] button and select the

RADIO mode. The frequency is displayed.

GTo set up the wall color

2-1. Touch the [WALL COLOR] key to set a

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the

radio reception band changes in the

following order:

desired wall color.

2-2. Touch a desired WALL COLOR.

3. Press the [DISP] button again or touch the

[RTN] key to return to the STANDARD

screen.

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3. Press the [a] or [d] button to tune in the

desired station.

∗ When the panel is open, the same operation

is also available by using the [a] or [d]

button in the panel.

VRX935VD

Radio Operations

Seek tuning

1. Press the [BND] button and select the

desired band. (FM or AM)

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

2. Tune in to a station.

When you are in the step tuning mode, the

frequency changes one step at a time. In quick

tuning mode, you can quickly tune the desired

frequency.

∗ If “MANU” is lit in the display press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek

tuning is now available.

1. Press the [BND] button and select the

3. Press the [a] or [d] button to

desired band. (FM or AM)

automatically seek a station.

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” appears in the display and manual

tuning is now available.

When the [d] button is pressed, the station

is sought in the direction of higher

frequencies; when the [a] button is

pressed, the station is sought in the direction

of lower frequencies.

2. Tune into a station.

G Quick tuning:

∗ When the panel is open, the same operation

is also available by using the [a] or [d]

button in the panel.

Press and hold the [a] or [d] button for 1

second or longer to tune in a station.

G Step tuning:

Press the [a] or [d] button to manually

Selecting stations with the KEY PAD

tune in a station.

∗ This function displays the KEY PAD on the screen

enabling you to tune in through auto store, preset

scan or by entering a frequency.

Recalling a preset station

Press the [KEY PAD] button to display the KEY

PAD.

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio

stations in memory. Pressing the corresponding

[DIRECT] button recalls the stored radio

frequency automatically.

There are 2 ways available to recall the preset

station.

GUsing the [DIRECT] buton.

1. Press the [BND] button and select the

desired band. (FM or AM)

2. Press the corresponding [DIRECT] button to

GTuning in by selecting a frequency

recall the stored station.

∗ Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store that station

into preset memory.

1. Touch the [SRCH] key to switch the KEY

PAD.

2. Touch the [0]~[9] key corresponding with the

frequency you desired. When you touch the

wrong number ([0]~[9] key), you can cancel

that to touch the [DEL] key.

GUsing the [DIRECT] key.

1. Press the [LIST] button or touch the screen

when the STANDARD screen is displayed,

then touch the [P.CH SELECT] key.

3. Touch the [ENT] key. The radio station you

2. Touch the corresponding [DIRECT] key to

required would be tuned.

recall the stored station.

∗ You can select the desired band to touch the

[BAND] key.

GTo use auto store,

touch the [AS] key for about 2 seconds.

GTo perform a preset scan,

touch the [PS] key.

3. Touch the [RTN] key or press the [LIST]

button to return to the previous mode.

GTo cancel the KEY PAD display,

press the [KEY PAD] button or touch the [OFF]

key.

VRX935VD

Radio Operations

Manual memory

Instant station recall (ISR)

1. Press the [BND] button and select the

desired band. (FM or AM)

Instant station recall is a special radio preset

that instantly accesses a favorite radio station at

a touch of a button. The ISR function even

operates with the unit in other modes.

2. Select the desired station with seek tuning,

manual tuning, or preset tuning.

GISR memory

3. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

1. Select the station that you wish to store in

ISR memory.

2. Press and hold [ISR] button for 2 seconds or

longer.

Auto store

GRecalling a station with ISR

Auto store is a function for storing up to 6

stations that are automatically tuned in

sequentially. If 6 receivable stations cannot be

received, a previously stored station remains

unoverwritten at the memory position.

1. In any mode, press [ISR] button to turn on

the radio function and tune the selected radio

station. “ISR” appears in the display. Press

[ISR] button again to return to the previous

mode.

1. Press the [BND] button and select the

desired band. (FM or AM)

2. Touch the screen switching touchkey when

the STANDARD screen is showing or press

the [LIST] button, the MENU screen

appears.

3. Touch the [SUB MODE] key in the MENU

screen and the [AUTO STORE] key appears

in the display.

4. Touch and hold the [AUTO STORE] key for 2

seconds or longer.

The stations with good reception are stored

automatically to the preset channels.

Preset scan

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for desired station in memory.

1. Touch the screen switching touchkey when

the STANDARD screen is showing or press

the [LIST] button, the STANDARD screen

appears.

2. Touch the [SUB MODE] key in the MENU

screen and the [PRESET SCAN] key

appears in the display.

3. Touch the [PRESET SCAN] key to start

preset scan. The unit starts scanning each

station for 7 seconds sequentially.

4. When the desired station is turned in, touch

the [PRESET SCAN] key again to continue

receiving that station.

VRX935VD

DVD Video Player Operations

GWhen watching through a conventional

type of the rear view monitor (4:3)

Changing DVD system settings

Notes:

• N PS : The leftmost and rightmost areas of

the screen are cut off.

• If the SETUP operation is performed in the middle

of video CD/DVD video play, the disc plays from

the beginning.

• Various settings of the SETUP menu cannot be

made with the remote control unit.

Selecting the DVD SETUP menu

1. Press and hold the [ADJ] button for 1 second

or longer. DVD SETUP stand-by screen is

displayed.

This function allows displaying the important

part of image fully on the screen. In some

cases, image is displayed while being

panned (scrolled).

2. Press the [STOP] key to display the DVD

SETUP menu.

• N LB : A black zone is created in the top and

bottom areas of the screen.

This method displays Cinema Scope and

Vista Vision images without cutting them off

by creating a black zone on the top and

bottom gaps.

3. Touch the [ ] key. Touch the [ ] key to

return to the previus menu.

GWhen watching through a wide type of the

rear view monitor (16:9)

• WIDE:

3. Touch the [RTN] key to return previous

4. Touch the [RTN] key to return the previous

mode.

Setting up the angle mark display

You can set up so that the angle mark appears

on scenes where the angles can be switched.

Setting up the screen size

Set up the screen size according to the rear

view monitor which is connected to this unit.

1. Following the steps 1 to 2 in “Selecting the

DVD SETUP menu”, touch the [TV

DISPLAY] key.

DVD SETUP menu”, touch the [ANGLE] key.

2. Touch the [ON] or [OFF] key to select “ON”

or “OFF”.

∗ The factory default setting is “OFF”.

2. Touch the [N PS], [N LB] or [WIDE] key to

select a desired size to set it.

3. Touch the [RTN] key to return previous

∗ The factory default setting is “N PS”.

The color of the selected item changes.

mode.

Setting up the disc menu language.

1. Following the steps 1 to 2 in “Selecting the

DVD SETUP menu”, touch the [MENU

LANGUAGE] key.

VRX935VD

DVD Video Player Operations

2. Touch the key to select a desired language

to set it.

Setting up the country code

Set up the country number for setting up of the

parental level.

∗ The factory default setting is “ENGLISH”.

3. Touch the [RTN] key to return previous

1. Following the steps 1 to 3 in “Selecting the

DVD SETUP menu”, touch the [PARENTAL

LOCALE] key.

mode.

2. Touch the ten-key(0 to 9) to input a 4-digit

country code.

Setting up the audio language

1. Following the steps 1 to 2 in “Selecting the

DVD SETUP menu”, touch the [AUDIO

LANGUAGE] key.

∗ The factory default setting is “8583”(U.S.A).

ꢀ Country code list

2. Touch the key to select a desired language

to set it.

Country

Region number 3

Input code

BRUNEI DARUSSALAM

Kingdom of Cambodia

INDONESIA

KOREA, DEMOCRATIC PEOPLE’S REPUBLIC OF

KOREA,REPUBLIC OF

LAO PEOPLE’S DEMOCRATIC REPUBLIC

MALAYSIA

MYANMAR

PHILIPPINES

SINGAPORE

6678

7572

7368

7580

7582

7665

7789

7777

8072

8371

∗ The factory default setting is “ENGLISH”.

3. Touch the [RTN] key to return previous

mode.

Setting up the subtitle language

1. Following the steps 1 to 2 in “Selecting the

DVD SETUP menu”, touch the [SUB TITLE

LANG.] key.

THAILAND

VIET NAM

EAST TIMOR

HONG KONG

MACAU

8472

8678

8480

7275

7779

8487

2. Touch the key to select a desired language

to set it.

∗ The factory default setting is “OFF”.

3. Touch the [RTN] key to return previous

TAIWAN, PROVINCE OF CHINA

mode.

Region number 4

ANTIGUAAND BARBUDA

ARGENTINA

AUSTRALIA

BAHAMAS

BARBADOS

BELIZE

BOLIVIA

BRAZIL

CHILE

COLOMBIA

6571

6582

6585

6683

6666

6690

6679

6682

6776

6779

Setting up the password for setting

up of the parental level

1. Following the steps 1 to 2 in “Selecting the

DVD SETUP menu”, touch the

[PASSWORD] (password) key.

2. Touch the ten-key(0 to 9) to input a 4-digit

password.

∗ The factory default setting is “0000”.

2-1. Input an old password, and touch the

COSTA RICA

CUBA

6782

6785

6877

6879

6967

8386

7074

7168

7184

7189

[ENT] key.

DOMINICA

DOMINICAN REPUBLIC

ECUADOR

EL SALVADOR

FIJI

GRENADA

GUATEMALA

GUYANA

2-2. Input a new password, and touch the

[ENT] key.

2-3. Input a new password again, and touch the

[ENT] key.

3. Touch the [RTN] key to return previous

mode.

Note:

HAITI

HONDURAS

JAMAICA

KIRIBATI

MARSHALL ISLANDS

MEXICO

MICRONESIA, FEDERATED STATES OF

NAURU

7284

7278

7477

7573

7772

7788

7077

7882

When a disc with view limited is played

When a disc with view limited is played, the input

screen requiring you to input the password may

appear. When this happens, enter the correct

password, otherwise play does not start.

VRX935VD

DVD Video Player Operations

Country

NEW ZEALAND

NICARAGUA

Input code

Setting up the parental level

You can change the level of parental lock

(audio-visual restriction).

7890

7873

This function allows cutting scenes that are

unfavorable for children or replacing them

automatically with other scenes prepared in

advance. For example, by replacing scenes of

radical violence or portrayals of sex with safe

scenes, you can make a trouble-free story as if

it were so from the beginning.

PALAU

PANAMA

PAPUA NEW GUINEA

PARAGUAY

PERU

SAINT KITTS AND NEVIS

SAINT LUCIA

SAINT VINCENT AND THE GRENADINES

SAMOA

8087

8065

8071

8089

8069

7578

7667

8667

8783

8366

1. Following the steps 1 to 3 in “Selecting the

DVD SETUP menu”, touch the [PARENTAL

LEVEL] key.

SOLOMON ISLANDS

SURINAME

TONGA

TRINIDAD AND TOBAGO

TUVALU

URUGUAY

VANUATU

VENEZUELA

ANGUILLA

ARUBA

VIRGIN ISLANDS (BRITISH)

8382

8479

8484

8486

8589

8689

8669

6573

6587

8671

2. When you touch the [w] or [z] key,

PASSWORD input screen is displayed.

3. Touch the ten-key(0 to 9) to input a 4-digit

password, and touch the [ENT] key.

∗ The factory default setting of the password is

“0000”.

4. Touch the [w] or [z] key to select level 1 to

8, or 0 (no parental).

CAYMAN ISLAND

CHRISTMAS ISLAND

COCOS (KEELING) ISLANDS

COOK ISLANDS

FALKLAND ISLANDS (MALVINAS)

FRENCH GUIANA

FRENCH POLYNESIA

GUADELOUPE

7589

6789

6767

6775

7075

7170

8070

7180

7185

7781

∗ The factory default setting is “8”.

The relationship between DVD video category

codes and parental level are shown in the table

below. Use this table when setting the parental

level.

LEVEL7

LEVEL6

LEVEL4

LEVEL3

LEVEL1

NC-17

GUAM

MARTINIQUE

(NO ONE 17 AND UNDER ADMITTED)

MONTSERRAT

7783

6578

7867

7885

7870

7780

8078

8475

8467

8770

(RESTRICTED)

NETHERLANDS ANTILLES

NEW CALEDONIA

NIUE

NORFOLK ISLAND

NORTHERN MARIANA ISLANDS

PITCAIRN

TOKELAU

TURKS AND CAICOS ISLANDS

WALLIS AND FUTUNA ISLANDS

PG-13

(PARENTS STRONGLY CAUTIONED)

(PARENTAL GUIDANCE SUGGESTED)

(GENERAL AUDIENCES)

• The contents that the parental level

restricts varies with the country code.

3. Touch the [ENT] key.

4. Touch the [RTN] key to return previous

mode.

VRX935VD

DVD Video Player Operations

Pausing play

Basic Operations

1. Press the [s] button to pause play.

“PAUSE” appears in the display.

Loading a disc

Insert a disc into the centre of the insertion slot

with the label side facing up. The disc plays

automatically after loading.

2. To resume disc play, press the [s] button

again.

Notes:

Ejecting a disc

• Never insert foreign objects into the disc insertion

1. Press the [Q] button a disc ejects. “EJECT”

appears in the display.

slot.

• If the disc is not inserted easily, there may be

another disc in the mechanism or the unit may

require service.

∗ If a disc (12 cm) is left in the ejected position

for 15 seconds, the disc is automatically

reloaded. (Auto reload)

Loading 8 cm discs

∗ 8 cm discs are not auto reloaded. Be sure to

∗ No adapter is required to play an 8 cm disc.

∗ Insert the 8 cm disc into the centre of the insertion

slot.

remove it when ejected.

Note:

• If you force a disc into before auto reloading, this

can damage the disc.

CAUTION

With the screen open, a driver may not see the

disc insertion slot. For your safety, insert a disc

with the screen closed.

Show the menu screen

1. Touch the screen to show the menu screen

while the main screen is being shown.

∗ To return to the main screen from the menu

screen, touch the [RTN] key.

Watching/Listening to a disc

already inserted

1. Press the [FUNC] button to select the DVD

mode. Play starts automatically. If no disc is

loaded in the unit, “NO DISC” appears in the

display.

KEY PAD operation

1. Press the [KEY PAD] button.

Each time the button is pressed, the KEY PAD

changes as follows.

WARNING

• Videos may be played back with

particularly loud sound. Increase the

volume gradually from the minimum

after the video images are displayed.

° In DVD video mode

Cross KEY PAD(Å, Î, w, z)

Ten KEY PAD(0 - 9)

• For your safety, the driver should not

watch the video or operate the controls

while driving. Please note that watching

and operating the video while driving

are prohibited by law in some countries.

Sub KEY PAD

(selection keys such as P.TIME)

KEY PAD OFF

° In video CD mode

Ten KEY PAD(0 - 9)

Note:

• For your safety, the VRX935VD has a safety

function which turns off the picture when the car

is moving, so only the audio can be heard. The

picture can only be watched when the car is

stopped and the parking break is applied.

Cross KEY PAD(Å, Î, w, z)

Sub KEY PAD

(selection keys such as P.TIME)

KEY PAD OFF

Notes:

∗ The KEY PAD displayed in the DVD video mode

always starts from the “Cross KEY PAD” when

the mode is engaged.

VRX935VD

DVD Video Player Operations

∗ The KEY PAD displayed in the video CD mode

always starts from the “Ten KEY PAD” when the

mode is engaged.

∗ Use either the “Cross KEY PAD” or the “Ten

KEY PAD” according to the disc contents menu

displayed in DVD video/video CD mode.

∗ Only the sub KEY PAD is displayed while you are

driving a car.

To switch the angle function, touch the

[ANGLE] key.

• In video CD mode:

To turn on/off the play time indication, touch

the [P.TIME] key.

To switch the playtime, touch the [P.TIME] key

for 1 second or longer.

∗ The KEY PAD is not displayed in the menu

screen while you are driving a car.

To perform track repeat, touch the [T.RPT] key.

To perform track scan, touch the [T.SCN] key.

To perform track random, touch the [T.RDM] key.

Sub KEY PAD operation

To turn on/off Play Back Control function,

touch the [PBC] key.

To switch the language, touch the [AUDIO]

key.

• In CD mode:

To switch the playtime, touch the [P.TIME] key

for 1 second or longer

To perform track repeat, touch the [T.RPT] key.

To perform track scan, touch the [T.SCN] key.

To perform track random, touch the [T.RDM]

key.

GEnter the title number or some other

information to select directly

• In MP-3 mode:

1. Touch the [SRCH] key to switch the KEY

To switch the playtime, touch the [P.TIME] key

for 1 second or longer.

PAD.

2. Touch the [0]-[9] key that corresponds to the

title number you desired. When you touch

the wrong number ([0]-[9] key), you can

cancel the key input by touching the [DEL]

key.

To perform folder repeat, touch the [F.RPT]

key.

To perform folder scan, touch the [F.SCN] key.

To perform folder random, touch the [F.RDM] key.

To perform file (track) repeat, touch the

[T.RPT] key.

• DVD video mode: select the title number.

• Video CD mode (with the PBC function

turned off): select the track number.

To perform file (track) scan, touch the [T.SCN] key.

To perform file (track) random, touch the

[T.RDM] key.

• CD mode: select the track number.

• MP3 mode: select the file (track) number.

3. Touch the [ENT] key.

• To return to the STANDARD screen, touch

the [OFF] key.

The specified title number is selected and

playback starts.

DVD Video Operations

GFunction of the other keys

• In DVD video mode

Watching a DVD-Video

After disc loading, the play mode is

automatically engaged.

To turn on/off the play time indication, touch

the [P.TIME] key.

To switch the playtime, touch the [P.TIME] key

for 1 second or longer.

• Button operation may not be allowed

depending on the story of the disc.

To perform title repeat, touch the [T.RPT] key.

To perform chapter repeat, touch the [C.RPT] key.

To perform chapter scan, touch the [C.SCN] key.

To switch the subtitles, touch the [SUBTTL] key.

To switch the language, touch the [AUDIO] key.

GAfter the menu screen is displayed

For normal DVD-Video discs, the menu screen

appears.

After the menu screen is displayed, select an

item in the following operations and play it back.

VRX935VD

DVD Video Player Operations

Showing the DVD menu

1. Press the [MENU] button during playback.

The DVD menus appears.

Stopping playback

1. Press and hold the [s] button for 1

second or longer during playback. Playback

stops.

The displayed contents may differ,

depending on the DVD software.

2. To resume playback. Press the [s] button,

and playback resumes from the scene where

playback is stopped.

• Example showing menu display

Pausing playback

1. Press the [s] button during playback.

Playback pauses.

2. To resume playback. Press the [s] button,

and playback resumes.

2. To cancel to the DVD menu, press the

Slow playback

[MENU] button again.

1. Press the [s] button then press and hold

the [d] button. While the button is being

pressed, slow playback continues at the

speed 1/2 times the normal playback.

∗ To select the menu contents, press the [KEY

PAD] button and use either the “Cross KEY

PAD” or the “Ten KEY PAD” according to the

disc contents menu.

• Slow playback cannot be performed in the

backward direction. In addition, audio

cannot be reproduced during slow

playback.

Switching KEY PAD position

When the KEY PAD becomes difficult to view in

the menu display, you can move it to the other

side of the screen.

Skipping a chapter (searching)

About chapter

KEY PAD

Chapter means a small segment to divide the

data area of the disc.

1. Press the [a] or [d] button during

playback.

Chapters are skipped, as many as the times

the button is pressed, and playback starts.

Current

location

Chapter

down

Chapter

• Press the [d] button, and playback starts

from the beginning of the next chapter.

• Press the [a] button, and playback starts

from the beginning of the current chapter.

When this button is pressed again within

about 2 seconds, playback starts from the

beginning of the previous chapter.

KEY PAD

• The unit may return to the menu screen

when the [d] button or [a] button is

pressed.

VRX935VD

DVD Video Player Operations

Fast forward and fast backward

1. Press and hold the [a] button or [d] button

during playback.

Scan playback

Scans and plays back all chapters recorded on

the DVD-Video, the first 10 seconds for each.

Press and hold the button, and the playback

speed becomes 4-time faster first and then

16-time faster 3 seconds later. Release the

button, and the normal speed is restored.

1. Touch the screen and touch the [SUB

MODE] key.

2. Touch the [CHAPTER SCAN] key, then

touch the [RTN] key.

• No audio is reproduced during fast forward

and fast rewind operation.

After scan playback of all chapters on the

disc, chapter scanning through the same

disc is performed again.

• The fast forward and fast rewind speed

may differ depending on the disc.

Depending on the disc, the menu may

appear again after scan playback of all

chapters within the title.

• The menu screen may appear when the

button is pressed.

3. Touch the [CHAPTER SCAN] key again,

and scan playback is turned off.

Searching with a chapter/title

number

Repeat playback

This operation plays back chapters/titles

recorded on the DVD-Video repeatedly.

You can locate the beginning of the scene using

the chapter numbers or title numbers recorded

on the DVD-Video disc.

GChapter repeat:

1. Display the sub KEY PAD using the

procedures described in the section “KEY

PAD operation”.

Plays back one chapter repeatedly.

1. Touch the screen and touch the [SUB

2. Touch the [SRCH] key.

MODE] key.

Each time you touch the [SHIFT] key, you

can switch between title number input “[T**]”

and chapter number input “[C***]”.

2. Touch the [CHAPTER REPEAT] key, then

touch the [RTN] key.

3. Touch the [CHAPTER REPEAT] key, repeat

• Title

playback is turned off.

A large segment to divide the data area of

the disc.

GTitle repeat:

Plays back all chapters within the title

repeatedly.

• Chapter

A small segment to divide the data area of

the disc.

1. Touch the screen and touch the [SUB

MODE] key.

3. Input the number of the title that you want to

2. Touch the [TITLE REPEAT] key, then touch

play back with the [0] to [9] key.

the [RTN] key.

4. Touch the [ENT] key.

3. Touch the [TITLE REPEAT] key, repeat

playback is turned off.

Playback starts from the scene of the input

title number or chapter number.

• If the input title number does not exist or

searching with a title number is not

allowed, the following message appears to

invalidate the input.

TOP function

The TOP function resets the DVD player to the

first chapter of the track.

1. Press the [BND] button to playback the first

chapter(chapter No. 1).

VRX935VD

DVD Video Player Operations

Using the title menu

Switching subtitles

On DVD discs in which two or more subtitle

languages have been recorded, you can switch

among the subtitle languages during playback.

On DVD discs containing two or more titles, you

can select from the title menu for playback.

1. Press and hold the [MENU] button for 1

second or longer during playback.

1. Display the sub KEY PAD using the

procedures described in the section “KEY

PAD operation”.

The title menu screen appears.

• Press the [MENU] button, and playback

resumes from the scene played back

before [MENU] button is pressed.

2. Touch the [SUB TTL] key during playback.

Each time you touch rhe key, you can switch

among subtitles.

• Depending on the disc, the title menu

cannot be called.

• Depending on the disc, up to 32 kinds of

subtitles may be recorded. For details, see

the mark of the disc ( : Indicates that 8

kinds of subtitles have been recorded).

2. Touch the [w], [z], [Å] or [Î] key to select

the item.

• Depending on the disc, items cannot be

selected with the ten-key buttons.

• Depending on the disc, switching may be

completely impossible or impossible on

some scenes.

3. Touch the [ENT] key.

• It may take time to switch among subtitles.

Switching among languages

GTo turn off subtitles

On discs in which two or more audios or audio

languages have been recorded, you can switch

among the audio languages during playback.

1. Touch the [SUB TTL] key several times, and

subtitles are turned off.

In initial setting:

1. Display the sub KEY PAD using the

procedures described in the section “KEY

PAD operation”.

Off Subtitle 1 Subtitle 2

2. Touch the [AUDIO] key during playback.

Subtitle X

Each time you touch the key, you can switch

among audio languages.

• Depending on the disc, up to 8 audios may

be recorded. For details, see the mark of

the disc (

: Indicates that 8 audios have

been recorded).

• When the power is turned on and when the

disc is changed with a new one, the

language set at the time of factory

shipment is selected. If that language has

not been recorded, the language specified

on the disc.

• Depending on the disc, switching may be

completely impossible or impossible on

some scenes.

• It may take time to switch among audios.

VRX935VD

DVD Video Player Operations

TITLE ELAPSED TITLE REMAIN

CHAPTER REMAIN CHAPTER ELAPSED

Switching angles

On DVD discs in which video images have been

recorded in two or more angles, you can switch

among the angles during playback.

• CHAPTER ELAPSED:

Elapsed time of the chapter

• CHAPTER REMAIN:

Remaining time of the chapter

• TITLE ELAPSED:

1. Display the sub KEY PAD using the

procedures described in the section “KEY

PAD operation”.

2. Touch the [ANGLE] key during playback.

Each time you touch the key, you can switch

among angles.

Elapsed time of the title

• TITLE REMAIN:

• Depending on the disc, up to 9 angles may

be recorded. For details, see the mark of

Remaining time of the title

the disc (

: Indicates multi-angle).

• Depending on the disc, angles may switch

smoothly or switch with a momentary still

image.

Watching a video CD

After disc loading, the play mode is

automatically engaged.

• When the power is turned on and when the

disc is changed with new one, the

language set at the time of factory

shipment is selected. If that language has

not been recorded, the language specified

on the disc.

• Button operation may not be allowed

depending on the story of the disc.

ꢀAfter the menu screen is displayed

For V-CD discs equipped with the PBC (Play

Back Control) function, the menu screen

appears. After the menu screen is displayed,

select an item in the following operations and

play it back.

• Depending on the disc, switching may be

completely impossible or impossible on

some scenes.

• It may take time to switch among angles.

• Depending on the disc, scenes recorded in

two or more angles may be played back.

Showing the V-CD menu (for V-CD

discs with PBC)

This key does not function on some discs.

Displaying the playback status

1. Press the [DISP] button or touch the

[P.TIME] key in the sub KEY PAD display

(using the procedures described in the

section “KEY PAD operation”) during

playback.

1. Press the [MENU] button during playback.

The V-CD menu appears.

The displayed contents may differ,

depending on the V-CD software.

• Example showing menu display

Each time you press the button or touch the

key, you can switch between display (ON)

and non-display (OFF) of the playback

status.

∗ To select the menu contents, press the [KEY

PAD] button and use either the “Cross KEY

PAD” or the “Ten KEY PAD” according to the

disc contents menu.

• Depending on the playback status or disc,

the following indication may appear.

Each time you touch the key for about 1

second or longer, you can switch among time

display.

VRX935VD

DVD Video Player Operations

Stopping playback

1. Press the [s] button for 1 second or

longer during playback. Playback stops.

Fast forward and fast backward

1. Press and hold the [a] button or [d] button

during playback.

GWhen the PBC is turned on

Press and hold the button, and the playback

speed becomes 4-time faster first and then

16-time faster 3 seconds later. Release the

button, and the normal speed is restored.

Resume playback

When the Play/pause [s] button is pressed,

the disc plays from the beginning.

• No audio is reproduced during fast forward

and fast rewind operation.

GWhen the PBC is turned off

To resume playback, press the [s] button,

and playback resumes from the scene where

playback is stopped.

• The unit may return to the menu screen

when the button is pressed.

Searching with a track number

This operation allows searching with the track

numbers recorded on the video CDs.

Pausing playback

1. Press the [s] button during playback.

Playback pauses.

1. Display the sub KEY PAD using the

procedures described in the section “KEY

PAD operation”.

2. To resume playback, press the [s] button,

and playback resumes.

2. Touch the [SRCH] key.

Slow playback

3. Input the number of the track that you want

1. Press the [s] button then press and hold

to play back with [0] to [9] key.

the [d] button.

While the button is being pressed, slow

playback continues at the speed 1/2 times

the normal playback.

4. Touch the [ENT] key.

Playback starts from the scene of the input

track number.

• If the input track number does not exist or

searching with a track number is not

allowed, the following message appears to

invalidate the input.

• Slow playback cannot be performed in the

backward direction. In addition, audio

cannot be reproduced during slow

playback.

∗ If you are playing a disc with PBC and the

PBC function is engaged, this operation may

not be performed.

Skipping a track (searching)

1. Press the [a] or [d] button during

playback.

The track is skipped and playback starts.

Current

location

Changing audio output

You can change the audio output method.

1. Display the sub KEY PAD using the

procedures described in the section “KEY

PAD operation”.

Track

2. Touch the [AUDIO] key during playback.

Backward

direction

Playback

direction

Each time you touch the key, you can switch

among audio output methods.

• Press the [d] button, and playback starts

from the beginning of the next track.

LL (Left) RR (Right) LR (Stereo)

• Press the [a] button, and playback starts

from the beginning of the current track.

When this button is pressed again within

about 2 seconds, playback starts from the

beginning of the previous track.

∗ This operation cannot be performed on some

discs with PBC.

VRX935VD

DVD Video Player Operations

Other various play functions

1. Touch the screen, the MENU screen

appears.

On/off of Playback Control

∗ This function is enabled only using the remote

control unit.

∗ The factory default setting is “ON”.

2. Touch the [SUB MODE] key in the MENU

On video CDs equipped with Play Back Control

function, you can turn it on/off.

screen to show SUB MODE.

3. Touch the touch key of the function you want

to play.

1. Press the [PBC] button on the remote control

unit.

G[TRACK SCAN]

Each time you press the button, you can

switch between on and off.

This operation scans and plays back all tracks

on the disc, the first 10 seconds for each.

When the PBC is turned on or off, the disc

plays from the beginning.

“TRACK SCN” will appear in the screen during

play.

GPlayback control (PBC)

G[TRACK REPEAT]

This control signal is recorded on a Video CD

for version 2.0 and used to control playback.

Using pre-recorded menu screens in the Video

CD with PBC, you can enjoy playback of

software with a simplified dialog function or

software with search function. You can also

enjoy a still picture at high or standard

resolution.

This operation plays back one track recorded on

the video CD repeatedly.

“TRACK RPT” will appear in the screen during

play.

G[TRACK RANDOM]

This operation plays back all tracks on the disc

in no particular order.

GWhen PBC is on

“TRACK RDM” will appear in the screen during

play.

If one of the following operations is done, the

disc plays from the beginning.

4. To cancel play, touch the touch key again.

When the [FUNC] button is pressed to switch to

some other mode, and the DVD player mode is

returned again.

• To return to the original screen, touch the

[RTN] key.

If you are playing a disc with PBC and the

PBC function is engaged, this operation can

not be performed.

When the [s] button is pressed to play the

disc again after play is stopped by pressing and

holding the [s] button for 1 second or longer.

When the ACC switch of a car is turned on/off.

Displaying the playback status

1. Press the [DISP] button during playback.

Each time you press the button, you can

switch between display (ON) and non-display

(OFF) of the playback status.

Listening to a CD

∗ This unit is a CD TEXT compatible model.

This unit supports the display of the DISC

TITLE, TRACK TITLE and ARTIST of the CD

TEXT.

• Depending on the playback status or disc,

the following indication may appear.

2. Display the sub KEY PAD using the

procedures described in the section “KEY

PAD operation”.

After disc loading, the play mode is

automatically engaged.

Note:

• This unit supports only CD TEXT in English. Also,

some character data may not be reproduced

properly on the display.

3. Touch the [P.TIME] key during playback.

Each time you touch the key, you can switch

among time display.

TRACK ELAPSED TRACK REMAIN

Pausing playback

1. Press the [s] button during playback.

Note:

• Depending on some discs, the [P.TIME] indication

may not be displayed on some scenes. Also, it

may occur that the P.TIME operation does not

work. When this happens, the indication

"INVALID" will appear.

Playback pauses.

2. To resume playback, press the [s] button,

and playback resumes.

VRX935VD

DVD Video Player Operations

2. Touch the [TRACK SCAN] key, then touch

Skipping a track (searching)

1. Press the [a] or [d] button during

playback.

the [RTN] key.

Touch the [TRACK SCAN] key again, and

scan playback is turned off.

Tracks are skipped, as many as the times

the button is pressed, and playback starts.

• Press the [d] button, and playback starts

Repeat playback

from the beginning of the next track.

This operation plays back tracks recorded on

the CD repeatedly.

• Press the [a] button, and playback starts

from the beginning of the current track.

When this button is pressed again within

about 2 seconds, playback starts from the

beginning of the previous track.

1. Touch the screen and touch the [SUB

MODE] key.

2. Touch the [TRACK REPEAT] key, then touch

the [RTN] key.

Touch the [TRACK REPEAT] key again, and

repeat playback is turned off.

TOP function

The TOP function resets the DVD player to the

first track of the disc.

Random playback

This operation plays back all tracks on the disc

in no particular order.

1. Press the [BND] button to playback the first

track (track No. 1).

1. Touch the screen and touch the [SUB

Fast forward and fast backward

1. Press and hold the [a] button or [d] button

during playback.

MODE] key.

2. Touch the [TRACK RANDOM] key, then

touch the [RTN] key.

Press and hold the button, and the playback

speed becomes 4-time faster first and then

8-time faster 3 seconds later. Release the

button, and the normal speed is restored.

Touch the [TRACK RANDOM] key, and

random playback is turned off.

Changing the display of the

playback status

Searching with a track number

This operation allows searching using the track

numbers recorded on the CDs.

1. Press the [KEY PAD] button and touch the

[P.TIME] key for 1 second or longer during

playback.

1. Press the [KEY PAD] button and toch the

Each time you touch the key, you can switch

among time display.

[SRCH] key.

2. Input the number of the track that you want

TRACK ELAPSED TRACK REMAIN

to play back with [0] to [9] key.

3. Touch the [ENT] key.

Playback starts from the scene of the input

track number.

Displaying CD titles

This unit can display title data for CD-text CDs.

• If the input track number does not exist or

searching with a track number is not

allowed, the following message appears to

invalidate the input.

∗

This function is enabled only when the panel is open.

1. Press the [DISP] button.

Disc title, track title and artist title are

displayed. Press the [DISP] button again to

return to the previous mode.

Scan playback

This operation scans and plays back all tracks

recorded on the disc, the first 10 seconds for

each.

1. Touch the screen and touch the [SUB

MODE] key.

VRX935VD

DVD Video Player Operations

GFolder structure

Listening to an MP3

This unit is a ID3 Tag compatible model.

1. A disc with a folder having more than 8

hierarchical levels will conflict with the

ISO9660 and playback will be impossible.

This unit supports the title, artist and album

display of the ID3 Tag versions 1 and 1.1.

GNumber of files or folders

After disc loading, the play mode is

automatically engaged.

1. A total of 255 files and folders are allowed.

(However, the maximum number of folders

must be within 254.) When the number of files

and folders is more than 256, playback of

tracks in excess of that number is impossible.

What is MP3?

MP3 is an audio compression method and

classified into audio layer 3 of MPEG standards.

This audio compression method has penetrated

into PC users and become a standard format.

2. Tracks are played in the order that they were

recorded onto a disc. (Tracks might not

always be played in the order displayed on

the PC.)

This MP3 features the original audio data

compression to about 10 percent of its initial

size with a high sound quality. This means that

about 10 music CDs can be recorded on a CD-

R disc or CD-RW disc to allow a long listening

time without having to change CDs.

• Some noise may occur depending on the

type of encoder software used while

recording.

• Files created using LAME (Lame Aint MP3

Encoder) may not be played properly.

• In case of a track recorded at VBR

(variable bit rate), the display for the play

time of the track may be slightly different

from the actual play time. Also, the

recommended value of VBR ranges from

64 kbps to 320 kbps.

Note:

• Some CDs recorded on CD-R mode may not be

usable.

Precautions when creating an MP3 disc

GFile extensions

• Depending on the damage conditions of a

file, it may occur that the file is not played

and the next file is played instead. Also, if

the damage is in a severe condition, play

stops showing the “DISC ERROR” display.

1. Always add a file extension “.MP3” or “.mp3”

to an MP3 file by using single byte letters. If

you add a file extension other than specified

or forget to add the file extension “.MP3” or

“.mp3”, the file cannot be played. In addition,

if you use upper case and lower case letters

(capital and small letters) mixedly for file

extensions, normal play may not be possible.

After disc selection, the play mode is

automatically engaged.

Note:

• If ID3 Tag information was entered with 2-byte

characters, it may occur that the characters are

not reproduced properly on the display.

2. Files without MP3 data will not play.

GLogical format (File system)

1. When writing an MP3 file on a CD-R disc,

please select “ISO9660 level 1 or level 2

(without including expansion format)” as

the writing software format. Normal playback

may not be possible if the disc is recorded on

another format.

Pausing playback

1. Press the [s] button during playback.

Playback pauses.

2. To resume playback,press the [s] button

again, and playback resumes.

2. The folder name and filename can be

displayed as the title during MP3 play but the

title must be within 31 and 27 single byte

alphabetical letters and numerals for the

folder name and filename, respectively

(without including an extension). Entering

more letters or numerals than specified may

cause an incorrect display.

VRX935VD

DVD Video Player Operations

3. Touch the [ENT] key.

Skipping a track (searching)

1. Press the [a] or [d] button during

playback.

When you select the folder number playback

starts from Track 1 of the input folder

number.

Tracks are skipped, as many as the times

the button is pressed, and playback starts.

When you are searching for some other

folder and track while a file is being played,

pressing the [MENU] button will return to the

file being played.

• Press the [d] button, and playback starts

from the beginning of the next track.

• Press the [a] button, and playback starts

from the beginning of the current track.

When this button is pressed again within

about 2 seconds, playback starts from the

beginning of the previous track.

Searching a desired file

(Track scan playback)

GAbout file scan playback

∗ This operation skips the track over the folder.

This operation plays back all files recorded on

the disc, about 10 seconds for each.

Fast forward and fast rewind

1. Press and hold the [a] button or [d] button

during playback.

1. Touch the screen and touch the [SUB

MODE] key.

2. Touch the [TRACK SCAN] key, then touch

Press the button, and the playback speed

becomes 4-time faster first and then 8-time

faster 3 seconds later. Release the button,

and the normal speed is restored.

the [RTN] key.

The monitor displays “TRACK SCN”. Scan

playback starts from the next file.

3. To cancel file scan playback, touch the

[TRACK SCAN] key again. The playback

status indication “TRACK SCN” goes off

from the monitor and the file currently being

played back continues.

Selecting a file (track) on the screen

1. Press the [MENU] button during playback.

Files (track) are displayed.

2. Touch the [w] or [z] key to select a file and

touch the [ENT] key.

Searching for a desired folder

3. Touch the [RTN] key to select a folder. The

(Folder scan playback)

This operation plays back the first files of all

folders on the MP3 disc, about 10 seconds for

each.

folder selection screen appears.

4. Touch the [w] or [z] key to select the folder

and touch the [ENT] key. The file selection

screen is returned.

1. Touch the screen and touch the [SUB

∗ If no further operation is performed for 7

seconds, the STANDARD screen is returned.

MODE] key.

2. Touch the [FOLDER SCAN] key, then touch

the [RTN] key.

Playback by selecting a folder and

The monitor displays “FOLDER SCN” and

folder scan playback starts.

file (Direct select mode)

This operation allows searching using the folder

and file (track) numbers recorded on the MP3

disc.

• Scan playback starts from the first file of

the next folder to the one currently being

played back.

3. To cancel folder scan playback, touch the

[FOLDER SCAN] key again. The playback

status indication “FOLDER SCN” goes off

from the monitor and the file currently being

played back continues.

1. Press the [KEY PAD] button and toch the

[SRCH] key.

Each time you touch the [SHIFT] key, you

can switch between “T000” for file (track)

number input and “F000” for folder number

input.

2. Input the number for the file (track) or folder

that you want to play back with [0] to [9] key.

VRX935VD

DVD Video Player Operations

Listening to one file repeatedly

Listening to tracks in a random

(Track repeat playback)

This operation plays back the file currently being

played back repeatedly.

order (Folder random playback)

This operation plays back tracks recorded on

the disc in no particular order.

1. Touch the screen and touch the [SUB

MODE] key.

2. Touch the [TRACK REPEAT] key, then touch

the [RTN] key. The monitor displays “TRACK

RPT” and file repeat playback starts.

2. Touch the [FOLDER RANDOM] key, then

touch the [RTN] key. The monitor displays

“FOLDER RDM” and folder random playback

starts.

3. To cancel file repeat playback, touch the

[TRACK REPEAT] key again. The playback

status indication “TRACK RPT” goes off from

the monitor and the file currently being

3. To cancel folder random playback, touch the

or [FOLDER RANDOM] key again.

The playback status indication “FOLDER

RDM” goes off from the monitor and the

track currently being played back continues

in normal playback.

played back continues in normal playback.

Listening to files in a folder

repeatedly (Folder repeat playback)

This operation plays back files in an MP3 folder

repeatedly.

Changing the display of the

playback status

1. Press the [KEY PAD] button and touch the

[P.TIME] key for 1 second or longer during

playback.

1. Touch the screen and touch the [SUB

MODE] key.

2. Touch the [FOLDER REPEAT] key, then

touch the [RTN] key. The monitor displays

“FOLDER RPT” and folder repeat playback

starts.

Each time you touch the key, you can switch

among time display.

TRACK ELAPSED TRACK REMAIN

3. To cancel folder repeat playback, Touch the

[FOLDER REPEAT] key again.

The playback status indication “FOLDER

RPT” goes off from the monitor and the file

currently being played back continues in

normal playback.

TOP function

The TOP function resets the DVD player to the

first track of the disc.

1. Press the [BND] button to playback the first

track(track No. 1).

Listening to files in a random order

(Track random playback)

This operation plays the files in the folder in a

random order.

Displaying MP3 ID3-TAG titles

ID3 information such as title, artist and album

title can be displayed for an MP-3 file containing

ID3 Tag information.

∗ This function is enabled only when the panel is

open.

1. Touch the screen and touch the [SUB

MODE] key.

2. Touch the [TRACK RANDOM] key, then

touch the [RTN] key. The monitor displays

“TRACK RDM” and random playback starts.

1. Press the [DISP] button.

Title, artist and album title are displayed.

Press the [DISP] button again to return to the

previous mode.

∗ In case of an MP3 file without ID3-TAG data,

“NO ID3 TAG DATA” appears in the display

then return to the STANDARD screen.

3. To cancel file random playback, touch the or

[TRACK RANDOM] key again.

The playback status indication “TRACK

RDM” goes off from the monitor and the file

currently being played back continues in

normal playback.

VRX935VD

VISUAL Operations

This function is available when a VTR, etc. is

connected to the visual 1 or visual 2 terminal.

∗ The visual 1 mode is not available when a DVD

changer is connected to the visual 1.

Adjusting the brightness and tone

of color

Notes:

• This function is not available when the display is

stored.

WARNING

• The HUE setting can be adjusted only when the

For your safety, the driver should not

watch the VTR, etc. or operate the controls

while driving. Please note that watching

and operating the VTR, etc. while driving

are prohibited by law in some countries.

NTSC mode is selected.

• Switch to the VISUAL/DVD player(DVD video or

video CD)/DVD changer/TV mode you see.

1. Press the [ADJ] button to switch to the

ADJUST MODE menu.

2. Touch the [MONI ADJ] key to display

[BRIGHT], [HUE] and [COLOR] key. Touch

the [BRIGHT], [HUE] and [COLOR] key to

adjust BRIGHT, HUE and COLOR.

Switching to the VISUAL mode

Note:

• For your safety, the VRX935VD has a safety

function which turns off the picture when the car

is moving, so only the audio can be heard. The

picture can only be watched when the car is

stopped and the parking break is applied.

G “BRIGHT”:

Adjust the brightness of the display.

G “HUE”:

1. Press the [FUNC] buton and select the

Adjust the tone of color (red is emphasized

or green is emphasized)

VISUAL mode.

2. Press the [BND] button to select the

• This operation is available only when the car

is stopped and the parking brake is applied.

VISUAL1 or VISUAL2.

G “COLOR”:

Adjust the color saturation.

• This operation is available only when the car

is stopped and the parking brake is applied.

3. Operate the touch key to adjust a level.

G “BRIGHT”:

Switching the VTR system between

NTSC and PAL

∗ This function is enabled only when the panel is

open.

Switch to the VISUAL/VTR in TV mode you use.

[–] key or [+] key

1. Press the [ADJ] button to switch to the

ADJUST MODE menu.

G “HUE”:

2. Touch the [NTSC/PAL] key, [NTSC] key and

[R] key or [G] key

G “COLOR”:

[PAL] key appears in the display.

3. Touch the [NTSC] key or [PAL] key to select

[–] key or [+] key

“NTSC” or “PAL”.

4. When adjustment is made, touch the [RTN]

key to return to the ADJUST MODE menu.

Touch the [RTN] key again to return to the

STANDARD screen.

∗ To return from the adjust a level display to the

STANDARD screen, press the [ADJ] button

once again.

VRX935VD

VISUAL Operations

Changing over monitor display size

∗ This function is available only when the panel is

open.

Monitoring the CCD camera

The CCD camera can be connected to this unit.

For the power supply of the camera, mount the

power box sold separately (CAA-188).

Notes:

• This function is not available while you are

driving.

• Switch to the VISUAL/DVD player(DVD video or

video CD)/DVD changer/TV mode you see.

Note:

• This function is not available when the display is

stored.

Switching the 2-ZONE/3-ZONE

The front monitor lock and rear monitor lock

allows you to enjoy 2-ZONE and 3-ZONE.

1. Press the [DISP] button for 1 second or

longer to change over the monitor display

size. Each time you press the [DISP] button,

the monitor display size changes in the

following order:

2-ZONE:

Use the front monitor lock (or rear monitor lock)

to lock the receiver screen image (or image

from a separately sold rear monitor) to switch

the speaker sound to a sound mode that differs

from the sound accompanying the image.

“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜

“CINEMA” ➜ “NORMAL”

G “NORMAL”: (normal display)

There is a black area at both right and left

ends of a display. In case of normal TV

broadcasting (4:3), the image can be shown

without being cut or deformed.

3-ZONE

When a separately sold rear monitor is

connected, use the front or rear monitor lock to

lock the image of the receiver and that of the

rear monitor and to switch the speaker sound to

a sound mode that differs from the sound

accompanying the image.

G “WIDE”: (wide mode)

The image at right and left ends in a display

elongates horizontally.

G “F. WIDE”: (full wide mode)

Notes:

• The front monitor lock displays the image of an

external device (VTR, TV game console, etc.)

connected to the Visual 2 terminal.

• The rear monitor lock displays the image of an

external device (VTR, TV game console, etc.)

connected to the Visual 1 terminal.

• When a DVD changer connected to the CeNET is

connected to the Visual 1 terminal, the rear

monitor lock cannot be used.

• When 2-ZONE or 3-ZONE is used, the sound

from an external device (VTR, TV game console,

etc.) can only be heard from headphones

connected to the external device.

The whole image elongates horizontally.

G “CINEMA”: (cinema mode)

The image at both top and bottom in a

display disappears.

Notes:

• When a normal 4:3 size image, not being a wide

one, is viewed by displaying it fully on a wide

monitor display in a wide mode or a full-wide

mode, a part of the peripheral image will be

lacking or deformed. In deference to the intention

of producer, an original image can be viewed in a

normal mode.

• A rear monitor is a separately sold accessory.

• During superimposed display, it becomes a full-

wide mode.

• When the monitor display size mode is changed,

only the monitor display size indication

superimposed on the screen (“NORMAL”,

“WIDE”, “F.WIDE” or “CINEMA”) will be changed,

then the corresponding display size mode will be

engaged.

VRX935VD

VISUAL Operations

GLock system monitor image and sound

2 ZONE

Front monitor lock

3 ZONE

Rear monitor

lock

(∗1)

Visual 2 connection Visual 2 connection

[OTHERS]

[NAVI]

Front image

(receiver

screen)

Image of device

Displays image of

mode selected

using the [FUNC]

button

Image of device

connected to the

Visual 2 terminal

(∗3)

connected to the connected to the

Visual 2 terminal Visual 2 terminal

(∗3)

Rear monitor

image

(separately

sold)

Image of device

connected to the mode selected

Visual 2 terminal using the [FUNC]

(∗3)

Displays image of Image of device connected to the

Visual 1 terminal

button (∗2)

Vehicle speaker Plays sound of mode selected using the [FUNC] button

sound

∗1 A device connected to the Visual 2 terminal should be set up as described in the section

“Switching Connect.”

∗2 No image is displayed on the rear monitor when a non-image mode such as radio, CD, etc. is

engaged.

∗3 For safety reasons, this image is not displayed when the vehicle is moving. The picture can be

watched only when the vehicle is standing still and the parking brake is engaged.

5. Touch the [RTN] key or press the [ADJ]

2-ZONE: 1 (front monitor lock)

button.

1. Press the [M.L] button.

The monitor lock is now canceled.

2. Press the [FUNC] button to select the

desired mode.

3. To cancel the monitor lock, press the [M.L]

Locking the front monitor and rear

monitor (3-ZONE)

1. Lock the rear monitor by performing the

instructions in steps 1 to 3 above.

button.

The screen shows the image of the selected

mode.

∗ When the front monitor lock is engaged,

[MENU], [LIST], [KEY PAD], [ADJ] and [A-M]

button cannot be used. Cancel the monitor

lock when you wish to use these buttons.

2. Press the [M.L] button to lock the front

monitor.

3. Press the [FUNC] button.

The image for the selected mode is

displayed for about 5 seconds after which

the front monitor lock image is displayed.

2-ZONE: 2 (rear monitor lock)

1. Press the [ADJ] button to display the

ADJUST MODE menu.

4. To cancel the monitor lock, press the [M.L]

button.

2. Touch the [REAR MONI LOCK] key and the

5. To cancel the rear monitor lock, press the

[ADJ] button, touch the [REAR MONI LOCK]

key and the [OFF] key.

[ON] key.

3. Touch the [RTN] key or press the [ADJ]

button.

4. To cancel the monitor lock, press [ADJ]

button, touch the [REAR MONI LOCK] key

and the [OFF] key.

VRX935VD

VISUAL Operations

CD/MD Changer

Operations

Note:

• When an optional DVD (CD/MD) changer is

connected through the CeNET cable, this unit

controls all DVD (CD/MD) changer functions. This

unit can control a total of 2 changers (MD and/or

CD and/or DVD).

Switching CONNECT(connect)

Make the following settings when an external

device is connected to the VISUAL 2 terminal.

NAVI:

when a navigation system is

connected

∗ When a navigation system is

connected, use the monitor lock

function. Locking the monitor locks

the screen size in F.WIDE mode (full

wide) and the VTR system to NTSC.

CD/MD changer functions

Press the [FUNC] button and select the CD

changer mode to start play. If 2 CD (MD)

changers are connected, press the [FUNC]

button to select the CD (MD) changer for play.

OTHERS: for external devices other than a

navigation system

NONE:

when no external devices are

connected

∗ If “NO MAGAZINE” appears in the display, insert

the magazine into the CD changer. “DISC

CHECKING” appears in the display while the

player loads (checks) the magazine.

∗ The factory default setting is “NONE”.

1. When the panel is open, press the [ADJ]

button to display the ADJUST MODE menu.

∗ If “NO DISC” appears in the display, eject the

magazine and insert discs into each slot. Then,

reinsert the magazine back into the CD changer.

2. Touch the [z] key two times to select

“CONNECT”.

∗ If “NO DISC” appears in the display, load MDs

into the MD changer.

Touch the [CONNECT] key to select “NAVI”

or “OTHERS” or “NONE”.

3. Press the [ADJ] button again or touch the

[RTN] key, the unit returns to the previous

mode.

CAUTION

CD-ROM discs cannot be played in the CD

changer.

Pausing play

1. Press the [s] button to pause play.

“PAUSE” appears in the display.

2. To resume play, press the [s] button

again.

∗ When the panel is open, the same operation

is also available by using the [s] button in

the panel.

Switching the CD TEXT titles

This operation is only possible when this unit is

connected with a CD TEXT compatible CD

changer.

You can select the CD TEXT titles among the

disc titles, track titles and artist titles.

When the panel is closed:

1. Press the [DISP] button to show the SUB

display. The disc title, track title or artist titles,

user title is displayed.

2. Each time you press and hold the [DISP]

button for 1 second or longer, the display

toggles among the disc title, the track title or

the artist titles, user title.

The selected title scrolls once.

VRX935VD

CD/MD Changer Operations

When the panel is open:

2. Each of the [DIRECT] key corresponds to an

MD loaded into the MD changer.

1. Press the [DISP] button.

Touch the [DISC SELECT] key in the display,

the [DIRECT] key (1 to 6) appears in the

display.

The disc title, track title, artist title and user

title is displayed.

2. Touch the [DISC] key, [TRACK] key,

[ARTIST] key or [USER] key to select the

desired title.

Touch the [DIRECT] key (1 to 6) and select

the desired MD.

The selected titles except for the user title

scroll once.

Selecting a CD

When the panel is closed:

3. Press the [DISP] button again.

The STANDARD screen is returned and the

selected title is displayed.

Each of the [DIRECT] buttons corresponds to a

disc loaded into the magazine.

GSelecting a disc from 1 to 6

Press the corresponding [DIRECT] button (1 to

6) to select the desired disc.

Switching disc titles and track titles

(MD)

This unit can display disc titles and track titles

already entered on MDs. Titles up to 256

characters long can be displayed by scrolling

the titles.

GSelecting a disc from 7 to 12 (only when a

12 disc CD changer is used.)

Press the corresponding [DIRECT] button (1 to

6) for 1 second or more, then select the desired

disc.

∗ Titles cannot be entered for MDs with this unit.

When the panel is open:

When the panel is closed:

Each of the [DIRECT] keys corresponds to a

disc loaded into the magazine.

1. Press the [DISP] button to show the SUB

display. The disc title or track title is

displayed.

GSelecting a disc from 1 to 6

2. Each time you press and hold the [DISP]

button for 1 second or longer, the display

toggles between the disc title and the track

title.

1. Touch the screen or press the [LIST] button.

2. Touch the [DISC SELECT] key in the display,

the [DIRECT] key (1 to 6) appears in the

display.

The selected title scrolls once.

When the panel is open:

Touch the corresponding [DIRECT] key (1 to

6) to select the desired disc.

1. Press the [DISP] button.

GSelecting a disc from 7 to 12 (Only when a

12 disc CD changer is used.)

The disc title and track title are displayed.

Touch the [DISC SELECT] key again, the

[DIRECT] key (7 to 12) appears in the display.

2. Touch the [DISC] key or [TRACK] key to

select the desired title.

Touch the corresponding [DIRECT] key (7 to 12)

to select the desired disc.

The selected titles scroll once.

3. Press the [DISP] button again.

The STANDARD screen is returned and the

selected title is displayed.

Switching to a next disc. (Disc Up

function)

The disc up function plays from the first track

(track No.1) of the next disc.

Selecting an MD

When the panel is closed:

Press the [BND] button.

Each of the [DIRECT] button corresponds to an

MD loaded into the MD changer.

Each time you press the [BND] button, the disc

changes to the next disc.

Press the [DIRECT] button (1 to 6) and select

the desired MD.

When the panel is open:

1. Touch the screen or press the [LIST] button.

VRX935VD

CD/MD Changer Operations

GTrack-down

Selecting tracks with the KEY PAD

∗ This function displays the KEY PAD on the screen

and allows you to select and repeat tracks you

wish to listen to.

1. Press the [a] button to move back to the

beginning of the current track.

2. Press the [a] button twice to move to the

Press the [KEY PAD] button to display the KEY

PAD.

beginning of the previous track.

∗

When the panel is open, the same operation is also

available by using the [a] button in the panel.

Fast-forward/Fast-backward

GFast-forward

Press and hold the [d] button for 1 second or

longer.

∗ When the panel is open, the same operation

is also available by using the [d] button in

the panel.

GFast-backward

GDirect track selection

Press and hold the [a] button for 1 second or

1. Touch the [SRCH] key to switch the KEY

longer.

PAD.

∗ When the panel is open, the same operation

is also available by using the [a] button in

the panel.

2. Touch the [0] ~ [9] key corresponding with

the track you desired. When you touch the

wrong number([0] ~ [9] key), you can cancel

that to touch the [DEL] key.

Top function (CD)

The top function plays from the first track (track

No. 1) of the disc.

3. Touch the [ENT] key.

The specified track is selected and playback

starts.

GWhen playing a disc 1 to 6

GTo repeat tracks,

Press the [DIRECT] button (1 to 6) with the

same number as the CD playing.

touch the [T.RPT] key.

GTo repeat discs,

GWhen playing a disc 7 to 12 (only when a

touch the [D.RPT] key.

GTo scan tracks,

12 disc CD changer is used.)

Press the [DIRECT] button (1 to 6) with the

same number as the CD playing for 1 second or

longer.

touch the [T.SCN] key.

GTo scan discs,

touch the [D.SCN] key.

GTo play tracks at random,

touch the [T.RDM] key.

GTo play discs at random,

touch the [D.RDM] key.

Top function (MD)

The top function plays from the first track (track

No. 1) of the disc.

Press the [DIRECT] button (1 to 6) with the

same number that the MD playing.

∗ If an MD is not loaded in a slot of the MD

changer, pressing the [DIRECT] button

corresponding to its disc number is invalid.

Selecting a track

GTrack-up

1. Press the [d] button to move ahead to the

beginning of the next track.

2. Each time you press the [d] button, the

track advances ahead to the beginning of the

next track.

∗

When the panel is open, the same operation is also

available by using the [d] button in the panel.

VRX935VD

CD/MD Changer Operations

Scan play

Disc repeat play

The scan play locates and plays the first 10

seconds of each track on a disc automatically.

This function continues on the disc until it is

cancelled or the mode is changed.

After all tracks in the current disc have been

played, the disc repeat play automatically

replays the current disc over from the first track.

This function continues automatically until it is

cancelled.

∗ The scan play is useful when you want to select a

desired track.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

2. Touch the [SUB MODE] key in the MENU

screen to show SUB MODE.

2. Touch the [SUB MODE] key in the

STANDARD screen to show SUB MODE.

Touch the [DISC REPEAT] key, disc repeat

play starts, “DISC REPEAT” light in the

display.

Touch the [TRACK SCAN] key to start scan

play. “TRACK SCN” lights in the display.

3. To cancel disc repeat play, touch the [DISC

REPEAT] key again. “DISC REPEAT” goes

off from the display and the unit returns to

normal play from the track being played.

3. Touch the [TRACK SCAN] key again to

cancel the scan play. Current track continues

to play.

Disc scan play

The disc scan play locates and plays the first 10

seconds of the first track on each disc in the

currently selected CD (MD) changer. This

function continues automatically until it is

cancelled or the mode is changed.

Random play

The random play selects and plays individual

tracks on the disc in no particular order. This

function continues automatically until it is

cancelled.

∗ The disc scan play is useful when you want to

select a desired CD (MD).

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

1. Touch the screen or press the [LIST] button,

2. Touch the [SUB MODE] key in the MENU

the MENU screen appears.

screen to show SUB MODE.

2. Touch the [SUB MODE] key in the MENU

When you touch the [TRACK RANDOM]

key, random play starts. “TRACK RANDOM”

lights in the display.

screen to show SUB MODE.

Touch the [DISC SCAN] key to start disc

scan play. “DISC SCN” lights in the display.

3. To cancel random play, touch the [TRACK

RANDOM] key again. “TRACK RANDOM”

goes off from the display and the unit returns

to normal play.

3. Touch the [DISC SCAN] key again to cancel

disc scan play. Normal disc play continues

on the current track.

Repeat play

Disc random play

The repeat play continuously plays the current

track. This function continues automatically until

it is cancelled.

The disc random play selects and plays

individual tracks or discs automatically in no

particular order. This function continues

automatically until it is cancelled.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

2. Touch the [SUB MODE] key in the MENU

screen to show SUB MODE.

2. Touch the [SUB MODE] key in the MENU

screen to show SUB MODE.

Touch the [TRACK REPEAT] key, to make

repeat play starts. “TRACK REPEAT” lights

in the display.

When you touch the [DISC RANDOM] key,

disc random play starts. “DISC RANDOM”

lights in the display.

3. To cancel repeat play, touch the [TRACK

REPEAT] key. “TRACK REPEAT” goes off

from the display and the unit returns to normal

play.

3. To cancel disc random play, touch the [DISC

RANDOM] key again. “DISC RANDOM”

goes off from the display and the unit returns

to normal play from the track being played.

VRX935VD

DVD Changer Operations

TV Operations

This function allows you to control a connected

DVD changer in the same way as described in

DVD player Operation.

TV functions

When an optional TV tuner is connected through

the CeNET cable, this unit controls all TV tuner

functions. To watch TV requires a TV tuner.

For details on operations other than those

described below, see DVD player Operation.

For details on DVD changer precautions, refer

to the supplied owner’s manual.

WARNING

For your safety, the driver should not

watch the TV or operate the controls

while driving. Please note that watching

and operating the TV while driving are

prohibited by law in some countries.

Selecting a disc

When the panel is closed :

Each of the [DIRECT] button corresponds to a

disc loaded into the DVD changer.

Watching TV

Press the [DIRECT] button (1 to 6) and select

the desired disc.

Notes:

• For your safety, the VRX935VD has a safety

function which turns off the picture when the car

is moving, so only the audio can be heard. The

picture can only be watched when the car is

stopped and the parking break is applied.

When the panel is open :

Press the [LIST] button, otherwise press the

[DISC SEL] button on the remote control unit.

Touch the [DIRECT] key (1 to 6) in the display

or press the numeric button for the disc number

(1 to 6) on the remote control unit to select the

desired disc.

1. Press the [FUNC] button and select the TV

mode.

2. Press the [BND] button to select the desired

TV band (TV1 or TV2). Each time the button

is pressed, the input selection toggles

between TV1 and TV2.

Switching to a next disc. (Disc Up

function)

The disc up function plays from the first track

(track No.1) of the next disc.

3. Press the [d] or [a] button to tune in the

desired TV station.

∗ When the panel is open, the same operation

is also available by using the [a] or [d]

button in the panel.

Press the [BND] button.

Each time you press the [BND] button, the disc

changes to the next disc.

Watching a video

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12V video cassette player (VCP) or video

cassette recorder (VCR) to the TV tuner input

terminal.

Disc Repeat playback

This operation plays back all tracks on the disc

repeatedly.

There are 3 ways available :

1. Touch the screen or press the [LIST] button,

• Press the [KEY PAD] button and touch the

[D.RPT] key.

the MENU screen appears.

2. Touch the [EXTRA SELECT] key in the

• Touch the screen and touch the [SUB MODE]

key. Touch the [DISC REPEAT] key then

touch the [RTN] key.

MENU screen to select the [VTR] key.

3. To return to the TV broadcast, touch the

screen again and touch the [EXTRA

SELECT] key in the MENU screen to select

the [TELEVISION] key.

• Press the [RPT] button on the remote control

unit 1 second or longer.

∗ To cancel the disc repeat play, touch the [D.RPT]/

[DISC REPEAT] key or press the [RPT] button on

the remote control unit.

VRX935VD

TV Operations

Seek tuning

Manual tuning

1. Press the [BND] button and select the

desired TV band (TV1 or TV2).

There are 2 ways available: Quick tuning and

step tuning. When you are in the step tuning

mode, the frequency changes one step at a

time. In quick tuning mode, you can quickly tune

the desired frequency.

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek

tuning is now available.

1. Press the [BND] button and select the

2. Press the [d] or [a] button to

desired band. (TV1 or TV2)

automatically seek a station. Press the [d]

button to automatically tune up the frequency

band to the next available TV station; press

the [a] button to automatically tune down.

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” appears in the display and manual

tuning is now available.

∗ When the panel is open, the same operation

is also available by using the [a] or [d]

button in the panel.

2. Tune into a station.

GQuick tuning:

Press and hold the [d] or [a] button for 1

second or longer to tune in a station.

Selecting stations with the KEY

PAD

GStep tuning:

Press the [d] or [a button to manually tune in

∗ This function displays the KEY PAD on the screen

enabling you to tune in through auto store, preset

scan or by entering a frequency.

a station.

Note:

•

Manual tuning is cancelled if you do not operate the

unit for 7 seconds longer. (∗Only when connecting

the TTX7503z or TTX7504z with this unit)

Press the [KEY PAD] button to display the KEY

PAD.

Recalling a preset station

A total of 12 TV stations can be stored (6-TV1

and 6-TV2). This allows you to select your

favorite TV stations and store them in memory

for later recall.

There are 2 ways available to recall the preset

station.

GUsing the [DIRECT] buton.

GTuning in by selecting a frequency

1. Press the [BND] button and select the

∗ This function is supported only when the

component connected to the optional

TTX7501z (sold separately).

desired TV band. (TV1 or TV2)

2. To recall a stored TV station, press the

desired [DIRECT] button to select that

station.

1. Touch the [SRCH] key to switch the KEY

PAD.

∗ Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into the preset memory.

2. Touch the [0]~[9] key corresponding with the

frequency you desired. When you touch the

wrong number ([0]~[9] key), you can cancel

that to touch the [DEL] key.

GUsing the [DIRECT] key.

1. Press the [LIST] button or touch the screen

when the STANDARD screen is displayed,

then touch the [P.CH SELECT] key.

3. Touch the [ENT] key. The radio station you

required would be tuned.

GTo use auto store,

2. Touch the corresponding [DIRECT] key to

touch the [AS] key for about 2 seconds.

GTo perform a preset scan,

touch the [PS] key.

recall the stored station.

∗ You can select the desired band to touch the

[BAND] key.

3. Touch the [RTN] key or press the [LIST]

GTo cancel the KEY PAD display,

button to return to the previous mode.

press the [KEY PAD] button or touch the [OFF]

key.

VRX935VD

TV Operations

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

Setting the TV diver

∗ This function is enabled only when the panel is

open.

∗ Normally use the TV diver with the “ON” position.

You can change the reception setting for the TV

antenna connected to the TV tuner.

2. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station to that preset memory.

1. Press the [ADJ] button to switch to the

ADJUST MODE menu.

Auto store

2. Touch the [TV] key to select “TV DIVER”.

Auto store selects 6 TV stations automatically

and stores each one into a preset memory.

Touch the [TV DIVER] key to display [ON]/

[OFF] key.

If there are not 6 stations with good reception,

stations previously stored in memory remain

and only the strong stations are stored into

memory.

3. Touch the [ON] key or [OFF] key to set the

selected reception setting.

G ON:

1. Press the [BND] button and select the

Sets reception emphasizing the visual.

G OFF:

desired TV band. (TV1 or TV2)

2. Touch the screen or press the [LIST] button,

Sets the diver setting to OFF.

the MENU screen appears.

4. Press the [ADJ] button or touch the [RTN]

3. Touch the [SUB MODE] key in the MENU

screen, the [AUTO STORE] key appears in

the display.

key to return to the previous mode.

Touch and hold the [AUTO STORE] key for 2

seconds or longer. The stations with good

reception are stored automatically to the

preset channels.

Preset scan

Preset scan allows the user to view each preset

position before it automatically advances to the

next preset. This function is useful for searching

for desired TV station in memory.

1. Touch the screen or press the [LIST] button,

the MENU screen appears.

2. Touch the [SUB MODE] key in the MENU

screen, the [PRESET SCAN] key appears in

the display.

Touch the [PRESET SCAN] key to start

preset scan. The unit starts scanning each

station for 7 seconds sequentially.

3. When the desired channel is received, touch

the [PRESET SCAN] key again.

VRX935VD

Other Functions

4. Touch the [TITLE INPUT] key in the MENU

Always turning on the button

screen.

illumination on the operation panel

The title input mode display appears.

Notes:

• The following operation is enabled when the

panel is open.

5. Touch the characters, symbols, etc. shown in

the display to input titles.

• Doing this operation turns on and off the

illunination only for the buttons of VOL [+] and [–],

[DISP], and [OPEN].

The button illumination on the operation panel

when the display is turned upward, can be

switched between “ON” and “OFF”.

“

”

: Centering

: Backspace

: Space

“BS”

“

”

“MEMO” : Memory

“z(w)” : Scroll

Notes:

• Up to 10 characters can be input.

• To switch the character types, touch the scroll key

The factory default setting is ON.

G“OFF”: Button illumination on the operation

panel turns on for 5 seconds;

(z) at the lower left of the display.

6. Repeat the step 4 to enter the complete title.

G“ON”: Button illumination is always on when

the power is turned on;

1. When the panel is open, press the [ADJ]

7. Touch the [MEMO] key for 2 seconds or

longer to store the title into memory and

cancel title input mode.

button to show the ADJUST MODE menu.

2. Touch the [

]

key to select “UPPER ILLUMI”.

3. Touch the [UPPER ILLUMI] key to select

“ON” or “OFF”.

Title list play

You can display a list of titles, then select the

disc or broadcast station to listen to from that

list.

4. Touch the [ON] or [OFF] key for setting.

5. Press the [ADJ] button or touch the [RTN]

key to return to the previous mode.

∗ You can not display a title list with the unit in

Seek, Preset Scan, Auto store (Tuner or TV)

mode. Cancel those operation modes before to

display a title list.

∗ To set “ON” again, switch “OFF” to “ON” manually.

Entering titles

Titles up to 10 characters long can be stored in

memory and displayed for Radio stations, TV

stations and CD changer. The numbers of titles

that can be entered for each mode are as follows.

1. With the unit in radio, CD/MD changer or TV

mode, touch the [P. CH SELECT], [DISC

SELECT] key. A title list is displayed. The

following functions can be carried out in a

title list display.

Number of titles

30 titles

Mode

GTUNER: A title of a station stored in the

presets 1 to 6 or frequency is displayed;

TUNER mode

TV mode

15 titles

GCD/MD changer: DISC titles for discs 1 to

6 are displayed (By changing over a

display page in case of 12-CD changer,

disc 7 to 12 can be displayed). When there

is not any disc in a changer, “NO DISC” is

displayed.

Number of titles

60 titles

CD changer mode

CDC655z connected

CDC655Tz connected

CDC1255z connected

DCZ625 connected

100 titles

50 titles

100 titles

GTV: A title of a channel stored in the

presets 1 to 6 or a channel number is

displayed.

∗

You cannot enter titles with the unit in Seek, Preset

Scan, Auto store (TUNER or TV) mode. Cancel

each of those operations before entering titles.

2. Touch the [DIRECT] key (1 to 6) to select

one of the items 1 to 6 and reproduce the

selected broadcast station or disc.

1. Press the [FUNC] button to select the mode

you want to enter a title (TUNER, CD

changer or TV).

∗ In case of 12-CD changer, touch the [DISC

SELECT] key to change over to a list display

of discs 7 to 12.

2. Select and play a CD in the CD changer or

tune in to a Radio station or a TV station for

which you want to enter the title.

3. Touch the [RTN] key again to return to the

previous mode.

3. Touch the screen or press the [LIST] button,

the MENU screen appears.

VRX935VD

Other Functions

Setting the auto dimmer

Setting the beep

∗ The sound heard when you make operations is

called “beep”. The unit can be set up so that it

does not produce this beep sound.

The brightness of the color LCD display is

adjusted automatically in proportion to the

surrounding light. The auto dimmer function can

switch between ON and OFF.

∗ The factory default is “BEEP ON”.

1. When the panel is open, press the [ADJ]

ON :Auto dimmer function is set.

OFF:Auto dimmer function is cancelled.

∗ The factory default setting is “ON”.

button to select the ADJUST MODE menu.

2. Touch the [ ] key to select “BEEP”.

Touch the [BEEP] key to select “ON” and

“OFF”.

1. Press the [ADJ] button to display the

ADJUST MODE menu.

3. Touch the [ON] or [OFF] key to select a

2. Touch the [AUTO DIMMER] key to select

desired mode and set it.

“ON” or “OFF”.

4. Press the [ADJ] button again or touch the

[RTN] key, The unit returns to the previous

mode.

3. Touch the [ON] or [OFF] key for setting.

4. Press the [ADJ] button or touch the [RTN]

key to return to the previous mode.

Setting the motion and sprite

pattern speed

∗ The factory default setting is “HIGH” (high).

Adjusting the dimmer level

You can adjust the reduced illumination level of

the dimmer. When driving at night with the

inside of the car, the auto dimmer function can

reduce the display illumination linked “to the

illumination power supply of the car” in this

unit in order to prevent glare from the display.

1. When the panel is open, press the [ADJ]

button to select the ADJUST MODE menu.

2. Touch the [MOTION SENS] key to select

“HIGH” (high) or “MID” (mid) or “LOW” (low).

∗ This function is enabled only when the auto

3. Touch the [HIGH] or [MID] or [LOW] key to

dimmer function is set up to “OFF”.

select a desired mode and set it.

G The factory default:

4. Press the [ADJ] button again or touch the

[RTN] key. The unit returns to the previous

mode.

When the car light is off: Brightest setting

When the car light is on: Medium brightness

1. When the panel is open, press the [ADJ]

button to display the ADJUST MODE menu.

Clock Adjustment

1. When the panel is open, press the [ADJ]

button to select the ADJUST MODE menu.

2. Touch the [DIMMER LEVEL] key to adjust

the dimmer level.

3. Touch the [+] or [–] key to adjust.

2. Touch the [ ] key to select “CLOCK”.

4. Press the [ADJ] button again or touch the

Touch the [CLOCK] key to adjust the time.

[RTN] key two times.

3. Touch the [w],[z],[a.m] or [p.m] key to

The unit returns to the previous mode.

adjust the time.

∗ The time is displayed in 12-hour format.

4. Press the [ADJ] button again or touch the

[RTN] key two times. The unit returns to the

previous mode.

Setting the button illumination

∗ The factory default setting is “GREEN” (green).

1. When the panel is open, press the [ADJ]

button to select the ADJUST MODE menu.

2. Touch the [ ] key to select “KEY ILLUMI”.

3. Touch the [KEY ILLUMI] key to select “RED”

(red) or “GREEN” (green).

4. Touch the [RED] or [GREEN] key to select a

desired mode and set it.

5. Press the [ADJ] button again or touch the

[RTN] key. The unit returns to the previous

mode.

VRX935VD

Other Functions

5.1ch Surround Decoder

Operations

Setting the visual input sound level

You can adjust an input sound level of visual1/2.

∗ The factory default setting is “HIGH”(high).

5.1ch Surround Decoder control

function

This function is available when a 5.1ch

Surround Decoder (DVH920) is connected.

1. Press the [ADJ] button to display the

ADJUST MODE menu.

2. Touch the [ ] key to select “VISUAL AUX

When the 5.1ch Surround Decoder (DVH920,

sold separately) is CeNET connected, the 5.1ch

Surround Decoder Control unit (DVC920, sold

separately) cannot be used.

SENS”.

3. Touch the [VISUAL AUX SENS] key to select

“HIGH”(high) or “MID”(mid) or “LOW”(low).

4. Touch the [HIGH] or [MID] or [LOW] key to

This section describes operation procedures only.

select desired mode and set it.

For other details, refer to the owner’s manual

supplied with the 5.1ch Surround Decoder.

∗ For details on functions of each mode, refer to the

owner’s manual supplied with the DVH920.

5. Press the [ADJ] button or touch the [RTN]

key to return to the previous mode.

1. Press the [ADJ] button to show the ADJUST

Triggered audio mute for cellular

MODE menu.

telepones

This unit requires special wiring to mute the

audio signal automatically when a cellular

telephone rings in the car.

2. Touch the [SOUND] key.

∗ This function is not compatible with all cellular

telepones. Contact your local authorized Clarion

dealer for information on proper installation and

compatibility.

SOUND

3. Touch the required keys to make the desired

setting.

GSPEAKER SEL (speaker sel)

This function determines center speaker,

surround speaker and sub woofer connection.

3-1 Touch the [SPEAKER SEL] key to show the

submenu.

3-2 Touch the [CENTER SP], [SURROUND SP]

or [SUB WOOFER] key and the [ON] or

[OFF] key to turn speakers on or off

depending on what speakers are connected.

• The default value is “ON”.

• The phase of the “SUB WOOFER” is

reversed in the ON- setting. The default

value is “ON+”.

VRX935VD

5.1ch Surround Decoder Operations

GPL II Control

GSPEAKER GAIN

∗ This function is available only when the MUSIC

MODE is selected for Dolby PL II. For setup

details, see “Selecting the Dolby PL II (Dolby

Pro Logic II) type.”

This function sets speaker output level.

∗ This function is not available for speakers whose

“SPEAKER SEL” setting is set to OFF.

3-1. Touch the [SPEAKER GAIN] key to show

3-1. Touch the [PL II CONTROL] key to show

the submenu.

3-2. Touch the [FRONT L], [CENTER],

[FRONT R], [SURROUND R],

3-2. Touch the [PANORAMA], [DIMENSION] or

[CENTER WIDTH] key to select respective

item.

[SURROUND L] or [SUB WOOFER] key

to set respective item.

[PANORAMA]:

3-3. Touch the [w] or [z] key to make

adjustments in the range -10 dB to +10 dB

in 1 dB step increments. The default value

is “0 dB”.

Touch the [ON] or [OFF] key. “OFF” is the

default value.

[DIMENSION]:

GDELAY

Touch the [w] or [z] key to make

adjustments between 0 and 6. The default

value is “3”.

This function adjusts the timing of the speakers

so that they are synchronized with front speaker

output.

[CENTER WIDTH]:

∗ This function is not available for speakers whose

Touch the [w] or [z] key to make

adjustments between 0 and 7. The default

value is “3”.

“SPEAKER SEL” setting is set to OFF.

3-1. Touch the [DELAY] key to show the

submenu.

GFILTER

3-2. Touch the [CENTER SP] or [SURROUND

This function is used to select filter frequencies

that suit the speakers that are used.

SP] key to set respective item.

3-3. Touch the [w] or [z] key to adjust.

∗ This function is not available for speakers whose

“SPEAKER SEL” setting is set to OFF.

[CENTER SP]:

3-1. Touch the [FILTER] key to show the

Adjustments are made in the range 0 ms

to 5 ms. The default value is “0 ms”.

submenu.

3-2. Touch the [FRONT HPF], [CENTER HPF],

[SURROUND HPF] or [SUB WOOFER

LPF] key to set respective item.

[SURROUND SP]:

Adjustments are made in the range 0 ms

to 15 ms. The default value is “0 ms”.

3-3. Touch [w] or [z] key to make settings.

GDOLBY D

[FRONT HPF]:

This function sets the dynamic range

compression.

∗ This function is not available for speakers whose

“SPEAKER SEL” setting is set to OFF.

This function can be set to the following

four settings: 50 Hz, 80 Hz, 120 Hz or

THROUGH. “THROUGH” is the default

value.

3-1. Touch the [DOLBY D] key to show the

[CENTER HPF]:

submenu.

This function can be set to the following

three settings: 50 Hz, 80 Hz and 120 Hz.

“120 Hz” is the default value.

3-2. Touch the [MAX], [STD] or [MIN] key to

select respective item.

∗ The default value is “MAX”.

[SURROUND HPF]:

When all settings are completed, press the

[ADJ] button or touch the [RTN] key to

return to the previous mode.

This function can be set to the following

four settings: 50 Hz, 80 Hz, 120 Hz or

THROUGH. “THROUGH” is the default

value.

[SUB WOOFER LPF]:

This function can be set to the following

three settings: 50 Hz, 80 Hz and 120 Hz.

“120 Hz” is the default value.

VRX935VD

5.1ch Surround Decoder Operations

Output adjustment of subwoofer

volume, center volume and balance/

DSF mode

DSF effect ON/OFF

∗ The factory default setting is “OFF”.

1. Press the [A-M] button.

fader

1. Press the [A-M] button and touch the

[DETAIL] key.

2. Touch the [STATUS] key.

2. To make an adjustment on :

3. Touch the [DSF] key to select “on” and “off”.

GSubwoofer volume adjustment

4. Each time the [ON/OFF] key is touched, the

2-1. Touch the [SUBWOOFER VOL] key, then

touch the [w] or [z] key to adjust to

desirable level.

on and off statuses are switched alternately.

5. After the setting, press the [A-M] button

again or touch the [RTN] key to return to the

STANDARD screen.

∗ The factory default setting is “0”. (Setting

range : -6 to 3)

Note:

GCenter volume adjustment

•

If the DSF effect is set to OFF, the adjustment

made in “DSF” is not reflected in the music source.

2-1. Touch the [CENTER VOL] key, then touch

the [w] or [z] key to adjust to desirable

level.

Selecting the DSF type

1. Press the [A-M] button and touch the [DSF] key.

∗ The factory default is “0”. (Setting range : -6

to 0)

GBalance/Fader adjustment

2. Touch the key for the desirable type to select it.

2-1. Touch the [BAL/FAD] key.

3. When the setting is finished, touch the [RTN]

key or press the [A-M] button to return to the

previous mode.

Touch the [w] or [z] key to adjust the balance

level.

[w] key: emphasized the sound from the

front speakers.

P.EQ mode

[z] key: emphasized the sound from the

rear speakers.

P.EQ effect ON/OFF

∗ The factory default setting is “OFF”.

1. Press the [A-M] button.

2-2. Touch the [Å] or [Î] key to adjust the fader

level.

[Å] key : emphasized the sound from the

2. Touch the [STATUS] key.

left speakers.

3. Touch the [P.EQ] key to select “on” and “off”.

[Î] key : emphasized the sound from the

4. Each time the [ON/OFF] key is touched, the

right speakers.

on and off statuses are switched alternately.

3. When the adjustment is complete, touch the

[RTN] key or press the [A-M] button to return

to the STANDARD screen.

5. After the setting, press the [A-M] button

again or touch the [RTN] key to return to the

STANDARD screen.

Note:

• If the P.EQ effect is set to OFF, the adjustment

made in “P.EQ” is not reflected in the music

source.

VRX935VD

5.1ch Surround Decoder Operations

Setting and storing P.EQ Properties

1. Press the [A-M] button to show the AUDIO

MODE menu.

Selecting the Dolby PLII (Dolby Pro

Logic II) type

1. Press the [A-M] button and touch the [Dolby

2. Touch the [P.EQ] key to show the P.EQ

PLII] key.

adjusting display.

2. Touch the key for the desirable type to select

it.

3. Touch the key for the desirable type to select it.

The P.EQ adjustment contents are as

follows:

3. When the setting is finished, touch the [RTN]

key or press the [A-M] button to return to the

previous mode.

GSIGNAL

∗ The factory default is “off”.

∗ The factory default setting is “P.NOISE”.

This function selects [P. NOISE] or [MUSIC].

GSPEAKER SELECT

∗ The factory default setting is “FRONT”.

This function selects [FRONT], [CENTER] or

[SURROUND].

G“BAND”

∗ The factory default setting is “BAND1”.

Select the channel to be compensated

(BAND1, BAND2, BAND3).

G“FREQUENCY”

∗ The factory default setting is “1 kHz”.

Select the center frequency that you want to

compensate from the range of 20 Hz to 20

kHz. (1/3 octave step, 31 points)

G“Q”

∗ The factory default setting is “1”.

Set the sharpness of the Q-curve to one of

the parameters: 1, 3, 5, 7 and 20.

G“GAIN”

∗ The factory default setting is “0”.

Adjust the gain (output level) in the range of -

12 dB to +12 dB. (1 dB step, 25 points)

4. After making adjustments to a desired

pattern by repeating the operations of item3,

touch the [RNT] key or press the [A-M]

button to return to the previous mode.

VRX935VD

12. IN CASE OF DIFFICULTY

Problem

Cause

Measure

Power does not

turn on.

Fuse is blown.

Replace with a fuse of the same amperage. If the

fuse blows again, consult your store of purchase.

(No sound is

produced.)

Incorrect wiring.

Consult your store of purchase.

Nothing happens The microprocessor has

Turn off the power, then press the [RELEASE] lever

when buttons are malfunctioned due to noise, and remove the DCP.

pressed.

etc.

Press the reset button both of tuner amp unit and

main unit for about 2 seconds with a thin rod.

Note: When the reset button is pressed, turn off the

ACC power.

Display is not

accurate.

Tuner Amp Unit

Main Unit

The Reset button

∗ When the reset button is pressed, frequencies of

TV/radio stations, titles, etc. stored in memory are

cleared.

The remote

controller does

not work.

Direct rays of the sun fall on When direct rays of the sun fall on the light-receptive

the light-receptive part of the part of the remote controller, it may not work.

remote controller.

The batteries of the remote

controller unit are dead or

there is no battery in the

remote controller unit.

Check the batteries of the remote controller unit.

Disc cannot be

loaded.

Another disc is already

loaded.

Eject the disc before loading the new one.

Eject the foreign matter forcibly.

There is a foreign matter

already in place.

Sound skips or is Compact disc is dirty.

noisy.

Clean the compact disc with a soft cloth.

Compact disc is heavily

scratched or warped.

Replace with a compact disc with no scratches.

Sound is bad

directly after power the internal lens when the car

is turned on. is parked in a humid place.

Water droplets may form on

Let dry for about 1 hour with the power on.

Disc cannot play The view is limited.

with the display

Release the view limitation or change the parental

level.

See the subsection “Setting up the parental level”.

“PARENTAL

VIOLATION”

shown.

VRX935VD

Problem

Cause

Measure

The image is not The parking brake is not

Check that the parking brake is applied.

displayed.

pulled.

The display is

dark.

The brightness control is too Adjust the brightness properly.

low.

The operating condition is

not good.

The temperature inside the vehicle may be 0˚C or

less. Set to an appropriate temperature (25˚C or so)

and check it again.

The headlight of the vehicle The display is made dark at night to prevent the

is lit.

glare (When the headlight of the vehicle is lit in the

daytime, the display gets dark).

The color of the

The color is not adjusted

Check that COL and HUE are adjusted properly.

display is light or adequately.

a shade of color

is not good.

When the VTR is Improper NTSC/PAL setting Set the NTSC/PAL properly according to the VTR.

connected, the

image is

disturbed.

When the TV

tuner is

connected, the

image gets

unclear.

Bad receiving condition

A radio wave may not reach sufficiently due to

obstruction of mountains or buildings. Check it again

at a place where a radio wave can be received

properly.

The TV tuner has Bad receiving condition

a double or triple

image.

It may be under the influence of radio wave reflected

by mountains or buildings. Check it again after

changing place or direction.

The TV tuner has Presence of jamming

spots or stripes in

the image.

It may be under the influence from automobiles,

streetcar, power cable, neon sign, and so forth.

Check it again after changing place.

There are red,

green, and blue

points in the

display.

This is not a failure, but a phenomenon peculiar to a

liquid crystal panel (The LCD panel is produced

according to technology with very high precision.

Note that, though there are effective pixels of

99.99% or more, pixel missing or normally lit pixels

account for 0.01%).

VRX935VD

13. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

Cause

Measure

Error Display

ERROR 2

A CD is caught inside the CD deck and is This is a failure of CD deck’s mechanism

not ejected.

and consult your store of purchase.

ERROR 3

ERROR 6

ERROR 2

ERROR 3

ERROR 6

ERROR H

A CD cannot be played due to scratches,

etc.

Replace with a non-scratched,

non-warped-disc.

A CD is loaded upside-down inside the CD Eject the disc then reload it properly.

deck and does not play.

A CD inside the CD changer is not loaded. This is a failure of CD changer’s mecha-

nism and consult your store of purchase.

A CD inside the CD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-

warped-disc.

A CD inside the CD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when the temperature in the

MD changer is too high and playback has wait for a while to cool off MD changer.

been stopped automatically.

Lower the surrounding temperature and

ERROR 2

ERROR 3

ERROR 6

An MD inside the MD changer is not

loaded.

This is a failure of MD changer’s mecha-

nism and consult your store of purchase.

An MD inside the MD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-

warped-disc.

An MD inside the MD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when a non-recorded MD is

loaded in the MD changer.

Load a pre-recorded MD in the MD

changer.

For the DVD changer, refer to the Owner’s Manual provided with the DVD changer.

If an error display other than the ones described above appears, press the RESET button. If the

problem persists, turn off the power and consult your store of purchase.

∗ When the reset button is pressed, frequencies of TV/radio stations, titles, etc. stored in memory are cleared.

VRX935VD

14. SPECIFICATIONS

Pixels: 336,960 (1440 × 234)

FM Tuner

Frequency Range: 87.50 MHz to 108.0 MHz

General

Power source voltage:

14.4 V DC (10.8 to 15.6 V allowable)

Usable Sensitivity: 9 dBf

50dB Quieting Sensitivity: 15 dBf

Alternate Channel Selecitivity: 70 dB

Stereo Separation(1 kHz): 35 dB

Frequency Response(+/-3 dB): 30 Hz to 15 kHz

Ground: Negative

Current consumption: 4.0 A (1 W)

Auto Antenna Rated Current: 500 mA less

Dimensions of the Main Unit:

178 mm Width × 50 mm Height ×

165 mm Depth

AM Tuner

Frequency Range: 531 kHz to 1629 kHz

Usable Sensitivity: 25 µV

Dimensions of the Tuner Amp Unit:

178 mm Width × 37.5 mm Height ×

209.5 mm Depth

DVD player

System:

Digital Versatile Disc System with CDDA

capable

Weight of the Main Unit: 2.3 kg

Weight of the Tuner Amp Unit: 1.1kg

Usable discs: DVD video disc, Compact disc

Dimensions of the Remote Control Unit:

54 mm Width × 28.8 mm Height ×

155 mm Depth

Frequency Response:

20Hz to 22 kHz (48 kHz) ( 1 dB)

20Hz to 20 kHz (CD) ( 1 dB)

Signal to Noise Ratio: 100 dB (1 kHz) IHF-A

Dynamic Range: 100 dB (1 kHz)

Distortion: 0.01%

Weight of the Remote Control Unit:

100 g (including battery)

Main unit

Audio Amplifier

Rated power output:

18 W × 4 (20 Hz to 20 kHz, 1%, 4 Ω)

Maximum power output:

212 W (53 W × 4)

Speaker impedance: 4 Ω (4 to 8 Ω)

Input

Audio input:

172 mm

178 mm

50 mm

130 60mVrms (High)

600 80mVrms (Mid)

Tuner amp unit

840 100mVrms (Low)

(input impedance 10kΩ or greater)

Video input:

1.0 0.2 Vp-p (input impedance 75 Ω)

Video output

Video output:

1.0 0.2 Vp-p (output impedance 75 Ω)

LCD Monitor

Screen Size: 7-inch wide type

152 mm Width × 85 mm Height

178 mm

37.5 mm

Display method:

Notes:

Transmission type TN liquid crystal display

• Specifications comply with JEITA Standards.

• Specifications and design are subject to change

without notice for further immprovement.

Drive method: TFT (thin-film transistor)

active matrix driving

VRX935VD

Installation and Wire connection manual

I Contents

1. BEFORE STARTING ............................................................... 63

2. PACKAGE CONTENTS ........................................................... 63

3. GENERAL CAUTIONS ............................................................ 64

4. CAUTIONS ON INSTALLATION .............................................. 64

5. INSTALLING THE MAIN UNIT ................................................. 65

6. REMOVING THE MAIN UNIT .................................................. 67

7. CAUTIONS ON WIRING.......................................................... 67

8. WIRE CONNECTION .............................................................. 68

9. SAMPLE SYSTEMS ................................................................ 71

BEFORE STARTING

1. This set is exclusively for use in cars with a

negative ground 12 V power supply.

2. Read these instructions carefully.

3. Be sure to disconnect the battery “-” termi-

nal before starting. This is to prevent short

circuits during installation. (Figure 1)

Car battery

Figure 1

PACKAGE CONTENTS

1 Main unit

Bag for accessories of the main unit (No. 2)

Hook plate ................................................... 2

Cord clamp

2 Tuner Amp unit

3 Manuals

Owner’s manual & Installation manual

Warranty card

Rubber cap

Special screw

4 Power supply lead (For the main unit)

0 Bag for accessories of tuner amp unit

Maunting bracket......................................... 2

Canoe clip ................................................... 4

Machine screw (M4 × 8) .............................. 4

! Universal mounting bracket

@ Remote control unit

5 Power supply lead (For the tuner amp

unit)

Connection cord (Main unit ↔ Tuner amp unit)

7 Antenna extension cord

Bag for accessories of the main unit (No. 1)

Flat head screw (M5 × 8) ............................ 4

Sems hexagonal bolt (M5× 8) ..................... 5

Electro tap

# Battery

(for remote control unit)

$ Outer Escutcheon

Machine screw (M4× 3)............................... 4

% DCP Case

VRX935VD

GENERAL CAUTIONS

1. Do not open the case. There are no user ser-

viceable parts inside. If you drop anything

into the unit during installation, consult your

dealer or an authorized Clarion service cen-

tre.

2. Use a soft, dry cloth to clean the case. Never

use a rough cloth, thinner, benzine, or alco-

hol, etc. For tough dirt, apply a little cold or

warm water to a soft cloth and wipe off the

dirt gently.

CAUTIONS ON INSTALLATION

1. Prepare all articles necessary for installing

the main unit before starting.

5. Use the enclosed screws for installation. Us-

ing other screws can cause damage. (Figure

2. This model is used with the LCD panel slid

forwards (shell loading system). On some

types of cars, the LCD panel may touch the

dashboard or shift lever, in which case it can-

not be installed. Check that the set will not

hamper operation of the shift lever before

choosing the place of installation.(Figure 2)

Chassis

Damage

Max. 8 mm (M5 screw)

Dashboard

Figure 4

6. The source unit has mounting screw holes

for NISSAN (N marks) and TOYOTA (T

marks) vehicles.

Shift lever

(check that it does not

touch the LCD.)

Figure 2

3. Install the unit within 30° of the horizontal

plane. (Figure 3)

Figure 5

Max. 30˚

Figure 3

4. If you have to do any work on the car body,

such as drilling holes, consult your car dealer

beforehand.

VRX935VD

INSTALLING THE MAIN UNIT

I Universal Mount

1. Place the universal mounting bracket into the

instrument panel, use a screwdriver to bend

each stopper of the universal mounting

bracket inward, then secure the stopper as

shown in Figure 6.

2. Wire as shown in Section 8.

Notes:

3. Insert the main unit into the universal mount-

ing bracket until it locks.

1) Some car models require special mounting kits

for proper installation. Consult your Clarion

dealer for details.

2) Fasten the front stopper securely to prevent the

main unit from coming loose.

4. Mount the outer escutcheon so that all the

hooks are locked.

• Console opening dimensions

Rear fastening hole (of vehicle)

Instrument panel

182 mm

Hole

Stoppers

Special Screw

Screwdriver

Rubber cap

Universal mounting bracket

Stoppers

Main unit

2-Spring

Outer escutcheon

Note:

Set the outer escutch-

eon so that its metallic

part on the back side

fits the upper edge of

the main unit.

Figure 6

VRX935VD

I Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles)

This unit is designed for fixed installation in the

dashboard.

rection of arrow to remove it. Repeat the

same for the other side to remove the

springs from the both sides. (Figure 7)

If the vehicle is equipped with a factory-installed

radio, install the main unit with the parts and

screws marked (∗). (Figure 8)

If the vehicle is not equipped with a factory-in-

stalled radio, obtain an installation kit to install

the main unit in the following procedure.

2. Secure the mounting brackets to the chassis

as shown in Figure 8. Holes are pre-tapped

for TOYOTAand NISSAN vehicles; modifica-

tion, such as drilling new holes, of the mount-

ing brackets may be required for other mod-

els.

1. Remove the screws from both side of the

main unit. Then, at either side, lift the leaf

spring until the engaging claws are released

from the holes, and slide the spring to the di-

3. Wire as shown in Section 8.

4. Secure the unit in the dashboard, and then

reassemble the dashboard and the centre

panel.

2-Screw

Engagin claw

Main Unit

2-Spring

Screwdriver

Figure 7

Mounting bracket

(1 pair for the left and right sides)

4-Hexagonal screw ∗ (M5 × 8)

Main Unit

Pocket

Note 2

Centre Panel (Note 1)

∗: The screws with this mark are

enclosed in this set.

#:The parts and screws with this mark

are used to install radio or included in

the installation kit.

Figure 8

Note 1: In some cases, the centre panel may require

Note 2: If a hook on the installation bracket inter-

feres with the unit, bend and flatten it with

a nipper or a similar tool.

some modification (trimming, filling, etc.).

VRX935VD

REMOVING THE MAIN UNIT

1. When the rear of the main unit has been se-

cured with the method shown in Figure 6 un-

fasten the special screw.

pull the main unit out by the hook plate. (In-

sert both the right and left edges of the hook

plate.) (Figure 9)

2. Remove the outer escutcheon.

Note: Keep the hook plate. You cannot remove the

3. Insert the hook plate between the spring and

the universal mounting bracket, fit tab B of

the spring into hole A of the hook plate, then

main unit without disengaging the hook plate.

Instrument panel

Universal mounting bracket

2-Hook plate

Main

Unit

Spring

Outer escutcheon

Figure 9

CAUTIONS ON WIRING

Note: There are various types of fuse holder. Do not

1. Be sure to turn the power off before wiring.

let the battery side touch other metal parts.

2. Be particularly careful where you route the

wires.

CAUTION

Keep them well away from the engine, and

exhaust pipe, etc. Heat may damage the

wires.

After the connection, fix the lead by a clamp or

insulation tape for protection.

3. If the fuse should blow, check to see if the

wiring is correct.

If it is, replace the fuse with a new one with

the same amperage rating as the original.

Fuse

4. To replace the fuse, remove the old fuse of

the power supply lead and insert the new

one. (Figure10)

Fuse holder

∗ Power supply lead for the tuner amp unit : 15A

FUSE

Figure 10

∗ Power supply lead for the main unit : 3A FUSE

VRX935VD

WIRE CONNECTION

Securely connect to the

metal part of the car with a

screw, etc.

Black

Choke coil

Main power supply cord

Yellow

Fuse

Power supply lead

Main unit

Connection cord

(provided with this unit)

CeNET cable (Sold separately)

Power supply lead

VIDEO output (RCA) ∗5

VISUAL 1 audio input

terminal L+R (RCA)

VISUAL 1 video input (RCA)/

DVD changer input (RCA)

TV TUNER input (RCA)

Reset switch

Top view of the

tuner amp unit

5.1ch Surround Decoder select switch ∗3

∗2

∗6

Rear audio output (input) terminal L+R (RCA) ∗4

Front audio output (input) terminal L+R (RCA) ∗4

Non Fader output terminal L+R (RCA)

VRX935VD

Purple/Black

Purple

Green/Black

Blue/White

Green

Brawn

*∗1

)

Glay

Grass-green

No.

(

)

Description

Glay/Black

Orange/White

White/Black

Red

REAR RIGHT

FRONT RIGHT

FRONT LEFT

REAR LEFT

+12 V MAIN POWER

Amplifier turn-on lead

ILLUMINATION

+12 V ACCESSORY

GROUND

White

Yellow

CCD camera

(

VISUAL 2 terminal

Radio antenna jack (∗2)

CeNET terminal

Phone mute (Brown) (∗1)

Spare terminal (Yellow)

Parking brake (Grass-Green)

AUTO ANTENNA

Black

Blue

∗1: Connecting the PHONE MUTE Terminal

The lead included with the unit must be connected to the specified position of the vehicle’s

connector in order to use the “triggered audio mute for cellular telephones” function.

∗2: Use the attached extension lead when necessary. (Provided with this unit)

Note : Before making any installation, disconnect the car battery - (negative) cable.

∗3: If a 5.1ch Surround Decoder (DVH920, sold separately) is connected and the amp of this unit is

used, set the select switch to “LINE IN”. Then the AUDIO OUT (IN) terminal of the Tuner Amp

Unit is only available for audio input, not outputting the audio.

(LINE IN) D

N (LINE OUT)

∗4: Connect to a separately sold external amplifier with a separately sold RCA cord (L, R).

Note : When the 5.1ch Surround Decoder is connected, these terminals are only available for audio input.

∗5: Connect to a Rear View Monitor (sold separately) for the rear seat.

∗6: Connect to separately sold VTR equipment with a separately sold connection cord.

VRX935VD

I Connecting the Accessories

• Connection to the external amplifier

The external amplifier can be connected unless the 5.1ch Surround Decoder is connected. For

detailed information, refer to the instruction manual of the 5.1ch Surround Decoder.

• Connection to the CCD camera for vehicle

The CCD camera for vehicle can be connected to the CCD terminal on the tuner amp unit. For

detailed information, refer to the instruction sheet or manual for the CCD camera.

Notes:

• A power supply box (sold separately) is required for connection of the main unit and the CCD camera.

• The power supply box for camera CAA147 cannot be used. Please use the CAA188 instead.

• If the specified lead of the cellular phone is connected to the phone mute

lead of the source unit, the audio mute is available when the cellular

telephone is used.

• TV Tunner

When the TV TUNER is to be connected, connect the CeNET connector and RCA PIN (yellow). For

detailed information, refer to the instruction manual of the TV TUNER.

Parking brake lamp

I Connecting the parking brake lead

Connect the lead to parking brake lamp earth

+ lead to battery

in the meter panel.

Connect these three leads.

Notes:

- cord

• Connecting the parking brake lead to lamp earth

allows you to watch TV/VTR/DVD video/video

CD when the parking brake is engaged.

• When the parking brake lead is not connected,

the monitor will stay off.

parking

brake signal

lead

Parking brake lead

(bright green)

Parking brake

VRX935VD

SAMPLE SYSTEMS

I Sample System 1

MAIN UNIT

VRX935VD

RCA Cable

(Visual)

VISUAL 2 IN

TTX7501z

Tuner IN

TTX7503z/TTX7504z

TUNER AMP

UNIT

(CeNET TV TUNER)

VTR

CeNET

CCA-389

VISUAL 1 IN

RCA Cable

(Visual)

Rear view

monitor

CeNET

VCZ625

(DVD CHANGER)

CeNET Mode*

Rear Speaker

Front Speaker

*Switch the MODE switch

to the CeNET mode.

CCA-519-500

DCZ625

(CD CHANGER)

VRX935VD

I Sample System 2

MAIN UNIT

VRX935VD

(Gray)

Optical Digital Cable

(included the DVH920)

RCA Cable

(Visual)

VISUAL 2 IN

Tuner IN

TTX7501z

TTX7503z/TTX7504z

(CeNET TV TUNER)

TUNER AMP

UNIT

VTR

CeNET

CCA-389

VISUAL 1 IN

N(LINE OUT)

(LINE IN)D

RCA Cable

(Visual)

Set the select switch to

"(LINE IN)D".

Rear view

monitor

DVH920

(5.1ch Surround

Decoder)

(Black)

CeNET Mode∗

Front Speaker

Rear Speaker

SRK602

(Center Speaker)

VCZ625

(DVD CHANGER)

CeNET Mode∗

(Gray)

∗Switch the MODE switch

to the CeNET mode.

SRV303

(Powered Sub

Woofer)

VRX935VD

I Sample System 3

MAIN UNIT

VRX935VD

(Gray) Optical Digital Cable

(included the DVH920)

RCA Cable

(Visual)

VISUAL 2 IN

Tuner IN

TTX7501z

TTX7503z/TTX7504z

TUNER AMP

UNIT

(CeNET TV TUNER)

VTR

CeNET

CCA-389

VISUAL 1 IN

RCA Cable

N(LINE OUT)

(LINE IN)D

(Visual)

Set the select switch to

"N(LINE OUT)".

Rear view

monitor

RCA cable

DVH920

(5.1ch Surround

Decoder)

(Black)

CeNET Mode

∗

Amplifier

VCZ625

(DVD CHANGER)

CeNET Mode∗

SRK602

(Center Speaker)

Front Speaker

Rear Speaker

(Gray)

∗Switch the MODE switch

to the CeNET mode.

SRV303

(Powered Sub

Woofer)

VRX935VD

American Dynamics Camera Lens LDO614CS User Manual
Audison LRX 5 600 User Manual
Bryan Boilers RV550 User Manual
Canon UC 1000 User Manual
Cateye HL EL830RC User Manual
FujiFilm FINEPIX JV250 User Manual
FujiFilm FinePix Z85 User Manual
Jensen JAN139 User Manual
JVC Camcorder GZ HM50U User Manual
JVC GR SX37ED User Manual