Bravo View IND 5000BT User Manual

Thank You for purchasing the  
IND-5000BT  
1-DIN DVD/CD RECEIVER WITH 3.5” LCD  
USER MANUAL  
V1.0  
Bravo View Technology  
20153 Paseo Del Prado  
Walnut, CA 91789  
United States of America  
909-869-0699  
Safety Information  
Contents  
Safety Precautions.........................................1  
Safety Information..........................................2  
Features .........................................................3  
Panel Controls................................................4  
Remote Controls ............................................5  
USB/SD/MMC/MP3 Playback........................6  
Basic Operation..............................................7  
Rotary Knob Menu ....................................8-11  
Radio Mode..................................................12  
Disc Mode ...............................................13-16  
BT Mode..................................................17-19  
Device Connections ................................20-22  
Installation Guide.....................................22-24  
Anti-Theft System.........................................24  
Troubleshooting............................................25  
Care and Maintainance................................26  
Specifications...............................................27  
Caution  
This product is a CLASS 1 LASER PRODUCT.  
Use of controls or adjustments or performance  
of procedures other than those specified  
herein may result in hazardous radiation  
exposure. Do not open covers and do not  
repair yourself. Refer servicing to qualified  
personnel.  
Two Laser Products  
Wave length: CD: 780nm DVD: 650nm  
Laser power: No hazardous radiation is  
emitted with safety protection.  
To reduce the risk of fire electric shock, and  
annoying interference, use only the included  
components.  
Caution of Disc Using  
1. Never insert a 3-inch ( 8cm ) CD contained  
in the adapter or an irregularly shaped  
CD. The unit may not be able to eject it,  
resulting in a malfunction.  
2. Disc Cleaning. Use a dry, soft cloth to wipe  
the disc from center to edge, only neutral  
detergent can be used.  
3. When playing a new disc. New disc may  
have some rough spots around the inner  
and outer edges. If such a disc is used,  
remove these rough spots with a pencil or  
ball-point pen, etc.  
2
Features  
this product in any commercial (i.e. revenue-  
generating) realtime broadcasting (terrestrial,  
satellite, cable and/or any other media),  
broad-casting/streaming via internet, intranets  
and/or other networks or in other electronic  
content distribution systems, such as pay-  
audio or audio-on-dem and applications.  
An independent license for such use is  
mp3licensing.com.  
DVD-R/RW Compatibility  
It is possible to playback DVD-R/RW discs  
recorded with the video format and Video  
Recording format.  
Video CDs Featuring PBC  
Compatibility  
It is possible to playback Video CDs featuring  
PBC (playback control).  
Button Operation Explanations  
Some frequent operations  
1. Move cursor  
WMA and MP3 Compatibility  
It is possible to playback WMA and MP3 files.  
About WMA  
This unit can playback WMA data.  
Windows Media and the Windows logo are  
trade marks or registered trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
This unit may not operate correctly depending  
In Setting mode, rotating the VOL knob has  
on the application used to encode WMA files.  
the same function as the  
/
button to select  
setting items.  
About MP3  
2. Confirm  
Supply of this product only conveys a license  
for private, non-commercial use and does not  
convey a license nor imply any right to use  
Press the  
button on the panel  
to open the panel.  
Music Card Slot  
3
Panel Controls  
Power on/off: Press to turn on/off the unit.  
AMS  
1. Panel open  
16. - AMS: Auto preset (press more than 2 seconds)/  
Preset scan (press birefly, in Radio mode)  
- Stop (in CD, MP3/WMA, and DVD video mode)  
- Terminate call (in BT mode)  
2. Return to previous menu  
3. Button 1: Play/Pause  
4. Button 2: Intro play  
5. Button 3: Track repeat play  
6. Button 6: - DVD audio channel  
17. AUX IN (3.5mm audio/video input)  
18. Remote sensor  
19. - Previous track (in CD, MP3/WMA, and DVD  
video mode)  
- Fast backwards (press and hold more than 2  
seconds, in CD, MP3/WMA and DVD video mode)  
- Tuning backwards (press briefly o tune  
automatically, press and hold more than 2  
seconds to tune manually, in Radio mode)  
20. - Next track (in CD, MP3/WMA, and DVD video  
mode)  
- VCD audio channel L/R/ST  
7. Button 5: Video system PAL/NTSC/AUTO  
8. Button 4: Track random play  
9. Button 1~6: Radio preset: Press to listen to a  
preset station, and hold for more than 2 seconds  
to store station.  
11. Power on/off  
12. - Rotate the knob to adjust volume level  
- Press to select Audio/Video setting, and rotate  
the knob to adjust level.  
- Press more than 2 seconds to enter Setting  
menu.  
13. Select playing mode:  
• Radio  
• Disc (when disc inserted)  
• USB (when USB inserted)  
• SD (when SD/MMC inserted)  
AV 1 (rear audio/video input. External  
peripheral devices with RCA audio and  
video outputs can be connected with the  
unit.)  
AV 2 (front audio/video input)  
BT  
- Long press to return to main source menu  
in any mode, then use navigate button to  
select the desired mode, and press the  
VOL button to confirm.  
- Fast forwards (press and hold more than 2  
seconds, in CD, MP3/WMA and DVD video  
mode)  
- Tuning forwards (press briefly to tune  
automatically, press and hold more than 2  
seconds to tune manually, in Radio mode)  
21. - Press to navigate up among option items (in  
DVD, CD and MP3/WMA modes)  
- Play the previous preset radio station (in Radio  
mode)  
22. - Press to navigate down among option items (in  
DVD, CD and MP3/WMA modes)  
- Play the next preset radio station (in Radio  
mode)  
23. - Confirm operation (in Setting mode)  
- Stop auto seeking (in Radio mode)  
14. - Band switch: FM1-FM2-FM3-AM1-AM2 (in  
Radio mode)  
- Play/Pause (in DVD, CD and MP3/WMA  
modes)  
- Dial/Receive call (press briefly, in BT mode)  
15. 3.5 inch TFT display  
4
Remote Controls  
- AMS: Search and store stations  
automatically  
Press to turn on/off the unit.  
22. - DVD audio  
- VCD audio L/R/ST  
23. - Display time/clock (Video mode)  
- Return to previous menu  
24. - Angle (DVD only)  
- Terminate call (in BT mode)  
25. - Video system PAL/NTSC/AUTO  
- Radio band (in Radio mode)  
- Dial/Receive call (in BT mode)  
Remote Control Operating Range  
The remote control can operate within a  
distance of 3~5m.  
Replacing the lithium battery  
When the range of operation of the card  
remote control becomes short or no function,  
replace the lithium battery with a new one.  
Make sure the battery polarity replacement is  
correct.  
1. Pull out the battery holder while pressing  
the stopper.  
2. Insert the button-type lithium battery with  
the (+) mark facing upward. Insert the battery  
holder into the remote control.  
1. Zoom (DVD/VCD only)  
2. Title (DVD only)  
3. Power on/off  
4. Setup  
5. Menu cursor  
6. Enter  
7. Program  
(CR 2025)  
8. Digit area  
9. Select Audio/Video Setting, then rotate the  
knob to adjust level.  
10. Volume  
1
2
11. Mute  
12. - Radio tune  
- Track skip/seek  
13. Subtitle (DVD only)  
14. Source switch  
15. Repeat  
16. Repeat A-B  
17. Stop/Return  
18. Play/Pause  
19. Goto search  
20. - DVD menu  
- PBC (for VCD 2.0 or up)  
21. - OSD: On screen display  
Warning  
Store the battery where children cannot  
reach. If a child accidentally swallows the  
battery, consult a doctor immediately.  
Do not recharge, short, disassemble or heat  
the battery or dispose it in a fire.  
Do not leave the battery with other metallic  
materials. Otherwise, the battery may start  
to give off heat, crack or catch fire.  
When throwing away or saving the battery,  
wrap it in tape and insulate.  
5
USB/SD/MMC/MP3 Playback  
USB/SD/MMC Notes  
1. Load SD/MMC Card  
USB functions (flash memory type) MP3  
music play  
Insert the SD/MMC card into the slot, with  
the front side at right.  
1. SD/MMC card support  
2. USB flash memory 2 in 1 (SD/MMC)  
support  
The unit will play the music automatically  
and the LCD will show CARD.  
3. FAT 12/FAT 16, FAT 32 is possible  
- FAT 12/16 (dir: 200 support, file: 500  
support)  
- FAT 32 (dir: 200 support, file: 500 support)  
4. Tag (id3 tag ver 2.0)  
- Title/artist/album: 30 byte support  
5. Multi card reader not support  
6. USB 1.1 support  
USB 2.0 support  
(it can not support USB 2.0 speed. Just, get  
the same speed with USB 1.1)  
2. Take out SD/MMC Card  
Press SRC button and switch to non CARD  
mode, slightly press SD/MMC card, take  
out the card when it pops out.  
Note:  
Not all kinds of USB devices are compatible  
with the unit.  
3. Load USB Equipment  
Open the rubber cap, insert the USB into  
the connector and the unit will play the  
music in the  
USB storer automatically, and the LCD will  
show USB.  
4. Take out USB Equipment  
Press SRC button and switch to non USB  
mode, then take off the USB stick, close  
the rubber cap.  
6
Basic Operations  
Turn on/off the Power  
1. Press to turn on the unit.  
The unit goes back to the last status after  
power on.  
2. Press again to power off.  
Mute  
When power on, press to cut the sound.  
Note:  
Doing the operation above again or  
adjusting volume will release muting.  
Mute icon appears on the TFT during  
muting.  
Note:  
When some devices are not ready, they  
cannot be selected.  
You should stop switching when the playing  
source you desired has been selected and  
wait for some seconds, the unit will auto  
enter the playing source mode you have  
selected.  
Adjust the Volume  
Rotate the knob on the panel or press VOL +/-  
on the remote control to increase or decrease  
the volume.  
The adjustable range of volume is 0 to 39.  
When Reverse Driving  
If the rear view video camera is connected,  
the unit automatically switches to CAMERA  
source during reverse driving. The unit returns  
to the original work mode after the reverse  
driving is done.  
Playing Source Selection  
Method 1  
Short press the SRC button on the panel  
or remote control to cycle through all the  
available sources.  
Method 2  
In any mode, long press the SRC button on  
the panel or remote control to enter main  
source menu , then use navigate button to  
select the desired mode, and press the OK  
button to confirm.  
7
Rotary Knob Menu  
1. Rotate the knob to adjust volume level.  
3. Press the knob more than 2 seconds to  
enter Setting mode, then Use  
,
/
2. Short press to access the Audio&VIDEO  
Setting menu.  
and OK key to select setting items.  
General Setting  
BEEP: ON/ OFF  
The beep tone feature allows the selection of  
an audible beep tone to be heard each time  
the menu is accessed.  
LOUDNESS: ON/OFF  
When listening to music at low volumes, this  
feature will selectively boost certain bass and  
treble frequencies.  
TIME MODE  
12 HOUR MODE: the clock displays in the  
type of 12 hours such as 11:18 AM.  
24 HOUR MODE: the clock displays in the  
type of 24 hours such as 20:18.  
Each press the knob to change the AUDIO  
mode: EQ/Bass/Middle/Treble/Balance/Fader,  
and rotate the knob to adjust level.  
Each press the knob to change the VIDEO  
mode: Bright/Contrast/Saturation, and rotate  
the knob to adjust level.  
TIME ADJUST  
Press  
/
or  
/
key to set hour and minute.  
to select one  
Each time you press  
/
EQ: USER/FLAT/POP/ROCK/CLASSIC/  
JAZZ  
segment of the clock display:  
Hour-Minute  
The Equalizer function applies preset sound  
effects to the unit’s audio output signal. Turn  
the rotary encoder to select from the following  
equalizer options: USER, FLAT, POPULAR,  
ROCK, CLASSIC, JAZZ. With the equalizer  
function activated, if bass or treble is adjusted,  
the EQ Mode will revert to “USER”. When  
the equalizer function is activated, the most  
recently selected bass/treble levels cannot be  
adjusted. When the equalizer function is not  
active, the unit will return to the most recently  
selected bass and treble levels.  
As you select segments of the clock display  
the segment selected will be highlighted. Then  
you can press  
/
to put a clock right.  
PARKING: ON/OFF  
When it is in Parking “On” mode, if you  
play the video disc, the screen will show  
“WARNING: Engage Parking Brake to View  
Video”.  
MIRROR: ON/OFF  
This option allows for selection of a mirror  
image view when a rear view backup camera  
8
Rotary Knob Menu  
(sold separately) is connected to the CAMERA  
IN input on the back of the radio. Turn the  
rotary encoder to select “On” or “Off”.  
The rating of the disc is from 1 to 8:  
(1) with the most limits when playing.  
(8) with the least limits when playing.  
Original setting: 8  
SUBWOOFER: ON/80HZ/120HZ/160HZ  
After connecting a subwoofer to the back of  
Note:  
the unit, press  
/
key to select a crossover  
frequency: OFF, 80, 120 or 160Hz.  
The rating can be selected only under the  
password unlocked status, and the limits can  
be worked only under the password locked  
status.  
SUB VOLUME: 0-33  
Press  
/
key to select the desired  
subwoofer out volume level.  
DEFAULT: RESTORE  
If this item is selected, the unit will return to  
original setting.  
DVD Setting  
BRIGHTNESS  
Set the brightness of the video output with  
from 00 to 16.  
CONTRAST  
Set the contrast of the video output with  
from 00 to 16.  
HUE  
Set the hue of the video output with  
from 00  
to 16.  
TV SYSTEM: NTSC/PAL/AUTO  
Select the TV system in the setting menu.  
SATURATION  
Set the saturation of the video output with  
from 00 to 16.  
TV TYPE: 4:3PS/4:3LB/16:9  
Select TV type to watch wide screen movies.  
4:3 Pan Scan: For 4:3 TV, left and right edges  
will be cut.  
4:3 Letter Box: For 4:3 TV, black bars will  
appear on top and bottom.  
16:9: For 16:9 wide screen TV.  
PASSWORD  
1. Press number button " 0000 " on the remote  
control, then press the ENTER button to  
confirm.  
2. Press the desired 4-digit password, and  
then press ENTER button to confirm.  
3. Record the password and keep it in a safe  
place for future reference.  
If you forget the password, please  
enter 0000 to reset a new password.  
The password : 0000  
RATING: 1 KID SAFE/2 G/3 PG/4 PG13/5  
PG-R/6 R/7 NC-17/8 ADULT  
9
Rotary Knob Menu  
the DVD MENU/TITLE will be displayed in the  
selected language.  
LANGUAGE Setting  
If the DVD disc does not contain the selected  
language, the DVD MENU/TITLE will be  
displayed in the default language.  
Radio Setting  
OSD LANGUAGE:  
Select one language that you are familiar with  
to display system menu.  
AUDIO LANG:  
Select one dialogue language that you are  
familiar with when playing back DVD discs.  
LOC_DX: LOC/DX  
Choose radio distant or local.  
DX: Stations with strong and weak  
signals can be broadcast.  
LOCAL: Only station with strong signal can be  
broadcast.  
Note:  
If the DVD disc has the audio file in the  
selected language, the dialogues you listened  
to will be in the selected language.  
STEREO_MONO: STEREO/MONO  
Choose FM mono/stereo.  
If the DVD disc does not contain the audio file  
in the selected language, the dialogues you  
listened to will be in the default language.  
You can change the language by pressing  
[AUDIO] key of the remote controller.  
SUBTITLE LANG:  
Select one language that you are familiar with  
to display DVD subtitles.  
If the DVD disc has the subtitle file in the  
selected language, the subtitle will be  
displayed in the selected language.  
If the DVD disc does not contain the subtitle  
file in the selected language, the subtitle will  
be displayed in the default language.  
MENU LANG:  
Select one language that you are familiar with  
to display DVD menu.  
Note:  
If the DVD disc has the selected language,  
10  
Rotary Knob Menu  
BT Setting  
PAIR: ON/OFF  
Set pairing ON/OFF. If select ON, to return to  
BT main menu.  
AUTO CONNECT: ON/OFF  
After disconnecting with your mobile phone,  
the built-in bluetooth will send connection  
order automatically in 20s if you have set the  
‘AUTO CONNECT’ to ‘ON’.  
AUTO ANSWER: ON/OFF  
The built-in bluetooth changes the work mode  
to phone mode automatically and displays the  
calling number when one call is coming in.  
The built-in bluetooth will put through the  
call automatically if you have set the ‘AUTO  
ANSWER’ option to ‘ON’, whereas you should  
put through the call manually.  
PIN CODE  
The default pin code is “1234”. If you want to  
set a new pin code, please input the desired  
4-digit password by pressing the number  
button on the remote conrol, and then press  
ENTER button to confirm.  
RESET: ON  
If the Bluetooth function is abnormal, or  
you forget the pin code, when RESET ON  
is selected, the Bluetootch system will be  
cleared and return to default setting ,and the  
pin code also changed to “1234”.  
PAIR NAME  
Display the BT device name: IND-5000BT.  
11  
Radio Mode  
Accessing Radio Mode  
Press the SRC button on the front panel or  
remote control to switch to the Radio source.  
2
1
3
1. Source Indicator  
2. Current Preset Channels  
3. Time/Clock  
4
4. AM/FM Band  
5. Radio Station Frequency  
6. EQ Indicator  
5
6
Selecting a Band  
Storing Stations  
Press BAND once or more to select FM1-  
FM2 - FM3 - AM1 - AM2.  
Display shows wave band, frequency, and  
preset station number if already stored.  
- Auto storing  
1. Select a band (if needed).  
2. Press AMS briefly to scan the preset station  
P1 - P6 for 5 seconds each.  
3. Hold AMS more than 2 seconds, the  
6 strongest available stations will be  
automatically saved in the preset button  
(numbers 1-6).  
Selecting a Station  
Press the  
or  
tuning button to tune to  
another station.  
- Manual Storing  
1. Select a band (if needed), then select a  
station.  
Tuning  
2. Press and hold a preset button (numbers  
1-6) on the front panel or remote control.  
3. The preset number and station is displayed  
and highlighted.  
- AUTO SEEK  
Press the  
or  
buttons to seek the next/  
previous station automatically.  
- MANUAL SEEK  
Press and hold the  
or  
buttons to enter  
manual tuning mode. Press the buttons again  
to move the radio frequency number up or  
down one step.  
Recalling a Station  
1. Select a band (if needed).  
2. Press a front panel or remote control  
preset button (numbers 1-6) to select the  
corresponding stored station.  
Note:  
During manual seeking, if the pause between  
two operating steps is longer than 5 seconds,  
press the  
or  
buttons, the unit will enter  
auto seeking.  
Preset Mode  
Six numbered preset buttons store and recall  
stations for each band. The stored stations  
(P1-P6) for the current band can be viewed on  
the screen.  
12  
Disc Mode  
Accessing Disc Mode  
If a disc is already in the disc slot but is not  
playing, press the SRC button on the front  
panel or on the remote control to switch to the  
DISC source. To play files from an SD or USB  
that is already inserted, choose the CARD  
or USB source. The disc playback screen is  
indicated below:  
1
2
3
1. Source Indicator  
2. Current Track/Total Track  
3. Name of the Song Display  
4. Audio Folder  
5. Picture Folder  
6. Video Folder  
4
5
6
Insert a Disc  
2. ERROR will be displayed if error found in  
disc operation.  
3. For VCD/CD, VCD or CD icon will appear  
on the display.  
Press  
to flip down the panel. Insert the disc  
into the slot, and the unit will change to disc  
mode automatically.  
4. While MP3/WMA files playback, MP3/WMA  
icon will appear on the display.  
5. For DVD, DVD icon will appear on the  
display and TITLE appears. Press ENTER  
or to play.  
Note:  
Please confirm whether there is a disc in  
the unit before you insert another one.  
• The unit will exit current playing source and  
enter DVD mode when one disc is inserted.  
File Type Supported  
Audio file: MP3(*.mp3), WMA(*.wma)  
Video file:  
MP4 (*.avi, XVID)  
Eject the Disc  
MPEG 2 (*.vob)  
Press  
to flip down the panel. Press  
to  
MPEG 1 (*.dat)  
eject the disc.  
Picture file: JPEG (*.jpg)  
MP3 file:  
ISO 9660 or ISO 9660 + Joliet format - Max.  
Note:  
30 characters.  
After ejecting the disc, the unit reverts to  
radio mode.  
You can eject a disc with the unit powered  
off. The unit remains off after the disc is  
ejected.  
Max. nested directory is 8 levels.  
The max. album number is 99.  
The max. length of each track is 99 minutes  
59 seconds.  
Supported sampling frequency for MP3 disc:  
8KHz to 48KHz (44.1KHz preferably).  
Supported bit-rates of MP3 disc are: 32 - 320  
kbps (128 kbps preferably).  
Disc Playback  
1. When disc inserted, display shows LOAD.  
For MP3 or disc with mixed files, reading  
time may exceed 1 minute.  
13  
Disc Mode  
front panel or ENTER on the remote control  
to start play.  
5. During the file playing, press to stop and  
return to the sub-root.  
Disc and File NOT Supported  
*.AAC, *.DLF, *.M3U, *.PLS, MP3 PRO files  
and files with DRM.  
Open session discs.  
Note:  
Audio/Picture/Video File Playback  
1. If the selected folder does not contain  
any playable track, the track list is not  
displayed.  
2. During the folder selecting, press ESC  
to the upper folder (parent folder). If the  
uppermost folder is listed, ESC cannot be  
used.  
When AUDIO/PICTURE/VIDEO file is played,  
Category/Folder/File list will be displayed on  
the screen, and file/folder name being played  
will be displayed on top. Current selected item  
will be highlighted.  
The list lets you see the list of track titles or  
folder names on a disc. If you select a folder  
on the list, you can view its contents.  
MP3/WMA Notes  
MP3 and WMA (Windows Media Audio) music  
files are digital audio files that are compressed  
to allow more files to be stored. This unit  
can play MP3/WMA and video directly  
from files contained on a CD-R/RW, DVD-  
ROM, DVD+RW, DVD-RW, DVD+R, DVD-R  
and DVD-VIDEO, or an SD card or USB  
Device. Many types of software are available  
for converting audio files into MP3/WMA  
formats. Nero or Roxio Easy CD Creator  
are recommended. This unit can play MP3  
(MPEG1, 2, 2.5 Audio Layer 3). However, the  
MP3 recording media and accepted formats  
are limited.  
For Audio Files  
1. Press ESC to return to playlist menu.  
2. Use  
/
to select  
AUDIO folders.  
3. Press OK,  
on the front panel or EN-  
TER on the remote control to display all  
available audio file folders.  
4. Use  
/
to enter file list and use  
/
to  
select desired file, press OK,  
front panel or ENTER on the remote control  
to start play.  
on the  
5. During the file playing, press will enter  
power on logo, then press  
to return.  
For Picture files  
Entering ID3 Tag  
This unit supports ID3 tag version 2.0.  
For character codes, refer to the table to the  
below.  
1. Press ESC to return to playlist menu.  
2. Use  
/
to select  
PICTURE folders.  
3. Press OK,  
on the front panel or ENTER  
on the remote control to display all available  
picture file folders.  
4. Use  
/
to enter file list and use  
/
to  
select desired file, press OK,  
on the  
front panel or ENTER on the remote control  
to slide show the pictures, and press PROG  
to select picture showing style.  
5. During the file playing, press to stop and  
return to the sub-root.  
For Video files  
1. Press ESC to return to playlist menu.  
2. Use  
/
to select  
VIDEO folders.  
3. Press OK,  
on the front panel or ENTER  
on the remote control to display all available  
video file folders.  
4. Use  
/
to enter file list and use  
/
to  
Entering File and Folder Names  
Names using the code list characters are the  
select desired file, press OK,  
on the  
14  
Disc Mode  
only file names and folder names that can  
be entered and displayed. Using any other  
character will cause the file and folder  
names to be displayed incorrectly. The unit  
recognizes and plays only files with the MP3/  
WMA extension.  
and 7 since they do not contain since they do  
not contain any tracks directly. Folder 5 is not  
recognized at all since it is at the fourth level.  
Electronic Shock Protection  
• 10 seconds for CD-DA (CDA)  
• >45 seconds for MP3 recorded at 44.1kHz,  
128kbps  
Note:  
• >90 seconds for WMA recorded at 44.1kHz,  
128kbps  
A file name entered with characters not on the  
code list may not play correctly.  
MP3 Playing Order  
Stop Playback Temporarily  
When selected for play, files and folders  
(Folder Search, File Search or Folder Select)  
are accessed in the order in which they were  
written to the media. As a result, the order in  
which they are expected to be played may  
not match the order in which they are actually  
played. You may be able to set the order in  
which MP3/WMA files are to be played by  
assigning file names beginning with play  
sequence numbers such as "01" to "99". For  
example, a medium with the following folder/  
file hierarchy is subject to Folder Search, File  
Search or Folder Select as shown below.  
-
During playback, press  
playback.  
The sound will be muted.  
Display "PAUSE" in the TV screen.  
Press again to continue playback.  
to pause  
-
-
To resume normal play, repeat the operation.  
Stop Playback Entirely  
During DVD, VCD, CD, MP3 playback:  
1. Press key once stopping the playback  
and the relevant location on the disc is  
saved, press  
to resume the playback  
from the saved disc location.  
0
2. Press twice to cease the playback. Press  
to start the playback from the very  
beginning the Title page of the DVD or the  
first track of VCD / CD.  
()  
1
2
ķ
ĸ
Select Desired Track  
-
-
Press or to skip to the next track.  
Use 1-9 and 0, 10+ buttons on the remote  
control to select desired track number.  
3
4
Ĺ
ĺ
Ļ
Fast Forward/Backward During  
Playback  
ļ  
5
Press  
or  
for more than 2 seconds once  
Ľ
or more to select X2, X4, X8, X20, to fast  
backward or forward track during playback.  
- During the fast forward or backward  
ľ
ƻ
Root Folder  
Folder  
6
operation, press  
again.  
briefly to playback  
7
File  
Ŀ
- During the fast forward or backward  
operation, the volume will be muted.  
Layer1 Layer 2 Layer 3 Layer 4 Layer5  
The player will only recognize three folder  
levels and does not display folders containing  
only other folders. In the example above, the  
unit will display folders 3, 4, 6, and 8, but not 2  
Repeat  
During playback, press REPEAT once or  
more.  
15  
Disc Mode  
- RPT icon will appear on the display.  
chapter number.  
-
-
-
For VCD/CD: Display appears RPT ONE  
RPT ALL RPT OFF  
For DVD: Display appears RPT CHAPTER  
RPT TITLE RPT OFF  
For File disc: Display appears RPT ONE  
For VCD and CD, select track number.  
-
-
Press  
to play, or move the cursor to  
select "PLAY" and press ENTER to play.  
If you want to delete the list, move the  
cursor to "CLEAR", press ENTER to delete  
all the list set before.  
RPT DIR  
RPT ALL  
RPT OFF  
-
Press PROG again to exit program play.  
Note:  
DVD Audio Select  
Press AUDIO or R/L to select audio language  
to listen if the DVD has multiple audio  
languages.  
If you do not select RPT on, when the entire  
disc or TITLE playback has finished, the  
system will stop. If no other control, after 5  
minutes the unit will turn into standby mode.  
VCD Audio Select  
Press R/L to select audio channel to listen.  
Repeat A  
B
Select desired passage to repeat playback.  
Press A  
B once to select starting point.  
Display shows REPEAT A.  
- Press A  
B again to select ending point.  
L
R
Stereo  
-
Display shows REPEAT A  
passage start to replay.  
B, and selected  
DVD Subtitle Select  
Press SUB.T to select the subtitle language  
to show if the DVD has multiple language  
subtitles.  
-
Press A  
B once again to exit. Display  
shows A  
B CANCEL.  
PBC - Playback Control (for VCD  
only)  
DVD Title Select  
1. If you insert a VCD with PBC, playback  
starts from the beginning of the 1st track  
automatically.  
Press TITLE to display title or chapter list, use  
cursor or digit number to select, press ENTER  
to play.  
2. Press PBC to show menu, use  
/
or  
digit button to select desired track. Press  
to stop. Press PBC again to exit menu.  
DVD Angle Select  
Press ANGLE to select different angle to view  
if the DVD has multiple-angle views.  
GOTO  
Goto desired track/chapter or time point  
directly.  
Picture Mirror  
When you view a picture, press repeatly  
to mirror the picture vertically, and press  
repeatly to mirror the picture horizontally.  
Press GOTO button on the remote control,  
track or DVD Title/Chapter and time display  
on top of the screen. Current item is  
highlighted. Use  
/
to select desired item.  
Use digit button to select number. Press  
ENTER to confirm.  
ZOOM  
Press ZOOM button, the picture will be  
zoomed accordingly.  
Program  
-
Press PROG to enter program list. Use  
or cursor and digit button to enter  
number.  
For DVD and File disc, select title and  
/
/
16  
Bluetooth Mode  
Accessing Bluetooth Mode  
Stop Pairing  
Press the SRC button on the front panel or  
remote control to switch to the Bluetooth  
source.  
You can stop pairing or disconnecting in this  
following way:  
Enter BT Setting menu, switch the PAIR: ON/  
OFF options to OFF, then press ESC to return  
to Bluetooth main menu. After disconnecting,  
“NO DEVICE” will appear on the screen and  
the Bluetooth icon will disappear.  
Note:  
For your safety, avoid talking on the phone as  
much as possible while driving.  
(if the mobile  
Incoming Phone Waiting  
Bluetooth is a wireless transmission way  
for short distance. The built-in Bluetooth  
can connect with the mobile phones having  
Bluetooth function.  
phone has this function depending on the type  
of mobile phone)  
In the mode of communication or BT AUDIO  
(MUSIC PLAYING), if there is a call coming  
in, the TFT screen will appear "PHONE  
After connecting, you can control your mobile  
phone through the unit.  
NUMBER ANSWER?". If you press  
key  
to stop communication you are making, and  
receiving the incoming phone. If you press  
key on to reject the incoming call, and resume  
the former communication.  
Pairing  
Use this function to establish a connection  
between the unit and your mobile phone.  
Press the knob more than 2 seconds to enter  
Setting mode, then Use  
setting item, and use  
the PAIR: ON/OFF options to ON.  
key to select BT  
key to switch  
Voice Transfer  
During talking, press  
/
,
key to transfer audio  
from the unit to your mobile phone, and press  
key again to transfer audio from your  
mobile phone to the unit.  
Press ESC to return to Bluetooth main menu.  
“WAITING FOR PAIRING” will appear on the  
screen.  
Note:  
Some mobile phones will transfer audio from  
the unit to themselves once the incoming call  
is answered.  
(if the mobile phone has the  
BT Audio  
A2DP & AVRCP functions)  
After pairing successfully, in the mode of  
Bluetooth main menu, open the audio player  
of your mobile phone and set the transmit  
mode to Bluetooth. At this time, the unit  
screen will appear “MUSIC PLAYING”, and  
the audio will be transferred from the mobile  
phone to the unit. Some mobile phones may  
instruct to connect with the unit. After found  
the Bluetooth device name on mobile phone,  
you should select to connect it, and then input  
the pairing code (“1234” by default). When  
Turn on Bluetooth function of your mobile  
phone, keep phone within 3 meters to the unit  
and start to search for Bluetooth devices.  
After the name of the Bluetooth module  
appears on the pairing list on your mobile  
phone, you should select it. At this time, a  
pairing code is required. Enter the pairing  
code (“1234” by default) and the Bluetooth  
pairing will process automatically. Some  
mobile phones may instruct you to select  
connecting or disconnecting, please select  
connecting.  
music playback, you can press  
remote control to switch to play/pause, and  
press the key on the front panel and  
on the  
/
17  
Bluetooth Mode  
In the mode of the music player working, if  
you want to make a phone call, you can press  
the number keys on the mobile phone or on  
remote control (if the options are available).  
LOG  
the remote control, then press  
to dial. At  
the same time the music player will stop. The  
TFT screen will appear “DIALLING”, after the  
call received, the voice will be transferred  
to the unit. When the call ends, the TFT  
screen will appear “MUSIC PLAYING”. Some  
mobile phone may instruct whether resume to  
playback.  
After pairing successfully, in the mode of Blue-  
tooth main menu, press  
ling history.  
key to select dial-  
If there is an incoming phone call, the music  
player will stop, and the TFT screen will  
appear “PHONE NUMBER ANSWER?”. When  
the call ends, the TFT screen will appear  
“MUSIC PLAYER”. Some mobile phone may  
instruct whether resume to playback.  
1.  
Making a phone call using missed call history.  
Press button to search for desired record  
on the list.  
Missed Call  
/
2.  
Dialed Call  
Making a phone call using the dialled number  
history.  
Press  
/
button to search for desired record  
on the list.  
3.  
Received Call  
Making a phone call using the received call  
history.  
Press  
/
button to search for desired record  
on the list.  
Music Mode  
A2DP  
A2DP is short for Advanced Audio Distribution  
Profile. The mobile phones supporting this  
function can transmit stereo audio, whereas  
the ones not supporting this function can  
transmit mono audio only.  
AVRCP  
AVRCP is short for Audio/Video Remote  
Control Profile. The mobile phones supporting  
this function can control the playback of a  
Bluetooth audio player.  
18  
Bluetooth Mode  
General Notes for Bluetooth  
1. For N7X, N9X, PHILIPS, Sony Ericssion,  
SAMSUNG mobile phones, during our test,  
after the mobile phones appear connection  
successful, the unit still appear waiting for  
pairing. At this time you must find the unit’s  
Bluetooth module name on the pairing list  
of your mobile phone and select it. In the  
submenu, select connecting, then the unit  
will appear pair OK. Otherwise, there is no  
voice coming out when communicating,  
though the mobile phone has already  
displayed pair OK. Some mobile phones,  
such as PHILIPS, when it playbacks  
A2DP, you must in its playbacking mode,  
find the unit’s Bluetooth module name  
and reconnect (check your mobile phone  
whether has the A2DP & AVRCP functions).  
2. When pairing, some types of mobile  
phone can instruct you how to operate,  
for example, when you make a phone call  
with the unit, but no voice comes out, it is  
because the mobile phone voice doesn’t  
be transferred to the unit. The SAMSUNG  
mobile phone can instruct voice should be  
transferred to Bluetooth device.  
3. Depending on the mobile phone, if private  
mode is selected, when you make a  
phone call with the unit, when received,  
the voice can be transferred to the mobile  
phone. But sometime the Bluetooth maybe  
disconnect till the communication ends, and  
connects your mobile phone and the unit  
automatically. Some mobile phones maybe  
require you to perform again the pairing  
operation.  
4. For mobile phone, the Bluetooth device  
name must be primary symbols or  
numbers. Otherwise, some unpredictable  
issues may occur during the Bluetooth  
devices connecting and making phone call.  
5. After paired OK, if no sound produced,  
please check the Bluetooth stereo audio  
whether is switched to ON.  
19  
Device Connections  
If a proper fuse is installed and electrical  
problems still occur, please contact with  
any professional car shops for inquiry.  
DO NOT connect other equipments with the  
car battery to avoid battery overheating.  
Please make sure all the wiring connections  
& the cables of the Speakers are well-  
insulated. Otherwise, this unit may be  
damaged by short circuit.  
If there is no ACC available, please connect  
ACC lead to the power supply with a switch.  
If an external power amplifier is connected,  
please don't connect P.CONT lead to the  
power lead of the external power amplifier,  
otherwise, electric spark or other damage  
may be resulted.  
Notes of connection  
To avoid short circuit in the electrical  
system, ensure that the negative battery  
cable is disconnected before installation.  
To prevent short circuit in the wiring and  
damaging to this unit, secure all wirings  
with cable clamp or adhesive tape. Route  
the wirings in a secured, out of heating  
place without touching any moving parts  
such as gear shift, handbrake, and seat  
rails to prevent the wiring insulation being  
melted / wore off.  
Never pass the yellow power cord through  
the installation hole into the engine  
compartment and connect to the car  
battery. Otherwise, a high possibility of  
serious short circuit to the electrical system  
may be occurred.  
Replacing a new fuse with 15A rating  
when the old one is broken, using no  
fuse or fuse with improper rating may  
cause damage to this unit or even fires.  
Never ground the speaker output to prevent  
the damage to the built-in power amplifier.  
The minimum rating of the speakers  
connected to this unit is 50W with 4 to 8Ω  
impedance.  
Parking Brake Cable Connections  
Reverse Driving Cable Connections  
20  
Device Connections  
Wiring Diagram  
21  
Installation Guide  
Device Connections  
Preparation  
Using the ISO Connector  
1. If your car is equipped with the ISO  
connector, then connect the ISO connectors  
as illustrated.  
1. Disconnect battery  
Before you begin, always disconnect the  
battery negative terminal.  
2. For connections without the ISO  
connectors, check the wiring in the vehicle  
carefully before connecting, incorrect  
connection may cause serious damage to  
this unit.  
Cut the connector, connect the colored  
leads of the power cord to the car battery,  
as shown in the colour code table below for  
speaker and power cable connections.  
Note:  
If the unit is to be installed in a car equipped  
with an on-board drive or navigation computer,  
do not disconnect the battery cable. If the  
cable is disconnected, the computer memory  
may be lost. Under these conditions, use extra  
caution during installation to avoid causing a  
short circuit.  
2. Remove transport screws  
Function  
Location  
IMPORTANT:  
Remove these two transport screws  
before installation. Otherwise, the  
DVD player will not work.  
Connector A  
Connector B  
Rear Right (+) - Purple  
1
2
3
4
Rear Right (-) - Purple /  
Black Stripe  
Telephone Mute/Pink  
Battery 12V(+)/Yellow  
Front Right (+) - Gray  
Front Right (-) - Gray /  
Black Stripe  
3. Remove unit from sleeve  
Lift latches on both sides of sleeve to remove  
half-sleeve from the unit.  
ANT/Amp control  
/Blue  
Front Left(+) - White  
5
6
Front Left(-) - White /  
Black Stripe  
Mounting Sleeve Installation  
1. Slide the mounting sleeve off the chassis.  
If it is locked into position, use the removal  
tools (supplied) to disengage it.  
Rear Left (+) - Green  
7
8
ACC+/Red  
Rear Left (-) - Green/  
Black Stripe  
Ground/Black  
2. Check the dashboard opening size by  
sliding the mounting sleeve into it.  
If the opening is too small, carefully cut or  
file as necessary until the sleeve easily  
slides into the opening. Do not force the  
sleeve into the opening or cause it to bend  
or bow. Check for sufficient space behind  
the dashboard for the unit chassis.  
This unit can be installed in any dashboard  
with a suitable 183 mm (W) x 52 mm (H)  
opening as shown above. The dashboard  
should be 4.75 mm - 5.56 mm thick in order  
to be able to support the unit.  
3. Locate the series of bend tabs along the  
top, bottom, and sides of the mounting  
22  
Installation Guide  
sleeve. With the sleeve fully inserted into  
the dashboard opening, bend as many of  
the tabs outward as necessary to firmly  
secure the sleeve to the dashboard.  
Kit Installation  
If your vehicle requires the use of an  
installation kit to mount this unit, follow the  
instructions included with the installation kit to  
attach the unit to the mounting plate supplied  
with the kit.  
1. Wire and test the unit as outlined in the  
Mounting Sleeve Installation instructions.  
2. Install the radio/mounting plate assembly  
to the sub-dashboard according to the  
instructions in the installation kit.  
CAUTION:  
For proper operation of the DVD player,  
the chassis must be mounted within  
20 of horizontal. Make sure the unit is  
mounted within this limitation.  
4. Place the unit in front of the dashboard  
opening so the wiring can be brought  
through the mounting sleeve. Follow the  
wiring diagram carefully and make certain  
all connections are secure and insulated  
with wire nuts or electrical tape. After  
completing the wiring connections, turn the  
unit on to confirm operation (vehicle ignition  
must be on). If the unit does not operate,  
re-check all wiring until the problem is  
corrected.  
3. Replace the dashboard trim panel.  
ISO Installation  
This unit has threaded holes in the chassis  
side panels which may be used with the  
original factory mounting brackets of some  
vehicles to mount the radio to the dashboard.  
Please consult with your local car stereo shop  
for assistance on this type of installation.  
1. Remove the existing factory radio from the  
dashboard or center console mounting.  
Save all hardware and brackets as they will  
be used to mount the new radio.  
5. Make sure the radio is right-side up, then  
carefully slide the radio into the mounting  
sleeve until it is fully seated and the spring  
clips lock it into place.  
2. Carefully unsnap the plastic frame from the  
front of the new unit chassis. Remove and  
discard the frame.  
6. Secure the rear of the unit to the car  
body using the mounting bolt and rubber  
cushion.  
3. Remove the factory mounting brackets and  
hardware from the existing unit and attach  
them to the new unit. Do not exceed M5 x  
9mm maximum screw size. Longer screws  
may damage components inside the  
chassis.  
7. Test the unit using the “Operation”  
instructions that follow.  
23  
Installation Guide  
Anti-Theft System  
4. Wire the new unit as outlined in the  
Mounting Sleeve Installation instructions.  
5. Mount the new unit assembly to the  
dashboard or center console using the  
reverse procedure of step 1.  
This unit is designed with a flip-down  
detachable panel.  
The panel can be detached and taken with  
you, helping to deter theft.  
Remove the Panel  
1. Press to switch off the power of the unit.  
Reset  
2. Press  
to flip down the panel.  
3. Grasp the right side to release the front  
panel and then pull it at an angle to remove  
the right side from the chassis.  
4. Store the front panel in the supplied carrying  
case to protect it from dirt and damage, and  
take it with you to prevent theft.  
The RESET button is located behind the front  
panel and can only be accessed with the front  
panel opened. Resetting the unit will erase  
the time and preset memories. It should only  
be activated upon initial installation after all  
wiring is complete, or if there is a malfunction  
of any of the switches on the unit. In these  
circumstances, pressing the RESET button  
will clear the system and return the unit to  
default operation.  
Re-attach the Front Panel  
1. With the panel laying flat (in the “open”  
position), insert the left side of the panel in  
place until correctly engaged.  
2. Gently press the right side of the panel until  
the mechanism locks it into place.  
Fuse  
When replacing a fuse, make sure the new  
fuse is the correct type and amperage. Using  
an incorrect fuse could damage the radio.  
3. Lift upward to close the panel.  
Reconnect Battery  
When wiring is complete, reconnect the  
battery negative terminal.  
Remove the Unit  
1. Remove the panel and the trim plate.  
2. Remove the trim ring by firmly grasping one  
side and pulling.  
3. Insert the removal keys straight back until  
they lock, then pull the radio out. If the  
removal keys are inserted at an angle, they  
will not lock properly and will not release  
the unit.  
24  
Troubleshooting  
If you suspect something is wrong, immediately switch power off. Immediately stop using it and  
call the store where you purchased it. Never try to repair the unit yourself because it is dangerous  
to do so.  
Problem  
General  
Possible cause  
Solution  
Car ignition is not on.  
The unit will not switch Cable is not properly  
Turn your car key in the ignition.  
Check cable connection.  
on.  
connected.  
Fuse is burnt.  
Replace fuse with a new fuse of the  
same capacity.  
Volume is set at minimum or Check the volume or switch the mute  
the mute function is on. function off.  
No sound  
The unit or screen does  
not function normally.  
The unit system is unstable. Press the RESET button.  
DVD mode  
T h e d i s c i s i n s e r t e d Disc must be inserted with the label  
The appliance will not  
play discs.  
incorrectly.  
side facing up. Clean the disc and  
The disc is dirty or damaged. check for damage. Try another disc.  
Adjust mounting angle to less than 30˚.  
Mount the unit securely with the  
supplied parts.  
Sound skips due to Mounting angle is over 30˚.  
vibration.  
Mounting is unstable.  
TUNER mode  
U n a b l e t o r e c e i v e The antenna is not connected  
Connect the antenna properly.  
stations.  
properly.  
Poor quality reception of The antenna is not fully Fully extend the antenna and if  
radio station.  
extended or it is broken.  
broken, replace it with a new one.  
Connect the permanent live on the  
unit to the permanent live on the  
vehicle.  
The battery cable is not  
properly connected.  
Preset stations are lost.  
USB/SD/MMC mode  
The memory card or USB  
device has been inserted the Insert it the other way around.  
wrong way round.  
Unable to insert USB  
device or SD/MMC card.  
Check that the USB/SD/MMC file  
system is in FAT or FAT32 format.  
The USB device or SD/  
MMC card cannot be NTFS format is not supported. Due to different formats, some models  
read.  
of USB storage devices or MP3  
players may not be read.  
Remote control  
The remote control is  
not working or does not  
work properly  
The batteries are low or  
empty.  
Change the batteries.  
25  
Care and Maintenance  
DVD Player  
The following guidelines will help you extend the life of your DVD player:  
1. When cleaning the vehicle interior, do not get water or cleaning fluids on the unit.  
2. The DVD player will not operate properly in extreme hot/cold or under damp conditions. In  
case of such conditions, wait until the vehicle interior reaches a normal temperature or any  
condensation on the disc player lens has evaporated before using the player.  
3. Always remove the disc when the player is not in use.  
4. The unit is designed with a vibration dampening disc mechanism to minimize interruption of  
disc play due to normal vibration in a moving vehicle. However, occasional sound skips may  
occur when driving on very rough roads. This will not scratch or damage the disc, and normal  
play will resume when the rough conditions cease.  
CD-R and CD-RW Capability  
Depending on media type and method of "recording/burning", some CD-R/RWs may be  
incompatible with this unit. After "recording/burning", the session must be closed. Please refer  
to your software's recommended procedures for closing a disc/session. Review your recording  
software to familiarize yourself with the correct "recording/burning" procedures. We recommend  
using the latest versions of ROXIOTM or NEROTM burning software.  
In addition, this unit will only recognize the CDDA (Compact Disc Digital Audio), .MP3 and .WMA  
formats "recorded / burned" onto a CD-R/RW. This unit does not support .WAV, .OGG or other  
formats.  
Disc Care and Handling  
Dirt, dust, scratches and warpage can cause skips in the playback and deterioration of sound  
quality. Please follow these guidelines to take care of your compact discs.  
1. Do not touch the disc surface.  
2. Never use chemicals such as record sprays or household cleaners to clean discs, as they can  
irreparably damage the disc’s surface.  
3. Discs should be kept in their storage cases when not in use.  
4. Do not expose discs to direct sunlight, high temperatures or high humidity for long periods.  
5. Carefully wipe fingerprints, dust and dirt from the disc’s playing surface with a soft cloth.  
Wipe in a straight motion from the inside to the outside of the disc.  
6. Do not stick paper, tape or disc labels on disc surfaces, as internal damage may occur.  
26  
Specifications  
General  
Power supply:  
12VDC (11V-16V), Test voltage 14.4V, negative ground  
Maximum power output:  
Continuous power output:  
Suitable speaker impedance:  
Pre-Amp output voltage:  
Fuse:  
45W x 4 channels  
20W x 4 channels (4 10% T.H.D.)  
4-8ohm  
4.0V (CD play mode: 1KHz, 0dB, 10K load)  
15A  
Dimensions (WxHxD):  
Weight:  
178 x 50 x 166mm  
1.7kg  
Aux-in level:  
500mV  
Sub-out:  
4.0V (CD play mode: 61Hz, 0dB, 10K load)  
3.5 Inch TFT LCD  
Display resolution (dot)  
Active area (mm)  
Screen size (inch)  
Dot pitch (mm)  
Contrast ratio  
320×(RGB)×234  
76.32 (H)×42.822 (V)  
3.5 (16:9l)  
0.2385 (H) x 0.183 (V)  
350  
Brightness  
350nits  
FM Stereo Radio  
Frequency range:  
87.5-108.0MHz (Europe)  
87.5-107.9MHz (America)  
8dB μ  
30Hz-15KHz  
30dB(1KHz)  
50dB  
Usable sensitivity:  
Frequency response:  
Stereo separation:  
Image response ratio:  
IF response ratio:  
Signal/noise ratio:  
70dB  
>55dB  
AM(MW) Radio  
Frequency range  
522-1620KHz (Europe)  
530-1710KHz (America)  
30dBμ  
Usable sensitivity (S/N=20dB)  
Disc Player  
System:  
Disc digital audio system  
20Hz - 20KHz  
>80dB  
Less than 0.20% (1KHz)  
>60dB  
PAL/NTSC/AUTO  
Frequency response:  
Signal/noise ratio:  
Total harmonic distortion:  
Channel separation:  
Video signal format system:  
Video output:  
1
0.2V  
Components  
Mounting sleeve  
1
4
1
1
1
1
2
1
1
1
Machine screws M5x6 mm  
Mounting bolt (50 mm)  
Wire connector  
Removable face plate case  
Trim plate  
Removal key  
Operating Instructions  
Rubber cushion  
Note:  
Specifications and the design are subject to  
change without notice due to improvements.  
Remote control  
27  
Limited Warranty  
Bravo View Technology warrants this product (including any accessory and/or cable) against  
defects in material or workmanship as follows:  
1. Labor. For a period of 1 Year from original date of purchase, if the product is determined to  
be defective, Bravo View will repair or replace the product at no charge.  
2. Parts. For a period of 1 Year from original date of purchase, Bravo View will at no charge,  
replace with new or rebuilt parts in exchange for defective parts. The warranty will either continue  
from date of original purchase or 90 days from repair (Whichever is longer).  
This warranty does not cover customer misuse, improper installation, poor signal (including any  
“noise”), cosmetic damage, damage due by accident, abuse, negligence, commercial use, and  
improper operation.  
Proof of Purchase in the form of a copy of a bill of sale or copy of receipted/invoice, which shows  
clearly the sale of the unit, is required.  
Repair or Replacement as provided under this warranty is the exclusive remedy of the  
consumer. Bravo View Technology shall not be liable for any incidental or consequential  
damage for breach of any express or implied warranty on this product. In no event shall  
Bravo View Technology be liable for any incidental or consequential damage whatsoever  
arising out of the use or inability to use the product. Under no circumstance shall Bravo  
View Technology’s liability exceed the purchase price paid for the product. Except to the  
extent prohibited by applicable law, any implied warranty or merchantability or fitness for a  
particular purpose on this product is limited in duration to the duration of this warranty.  
PROCESS:  
1. Contact Bravo View and describe the problem with the unit. Please have your model number,  
date of purchase and where it was purchased ready. If requesting on-line, please include your  
name, address and telephone number.  
2. If determined that the item is warrantable, Bravo View will issue a RA# and provide an  
address to mail the unit back to.  
3. Bravo View is not responsible for articles lost or stolen during shipping. IT IS ADVISABLE TO  
SHIP THE UNIT IN A METHOD IN WHICH YOU CAN TRACK THE PACKAGE, AND POSSIBLY  
INSURE THE PACKAGE. Bravo View does not cover the expense of mailing the unit back to us.  
4. Once Bravo View receives and validates the unit to ensure it is within warranty, Bravo View  
will replace the unit, fix the unit, or offer a substitute of the unit if a replacement is not available.  
Bravo View may send a refurbished unit back.  
5. Bravo View will mail the unit back to you. To obtain warranty service, you must contact Bravo  
View Technologies for a Return Authorization Number (RA#). 866-40-BRAVO or visit www.  
bravoview.com.  
CLASS 1  
LASER PRODUCT  
P.N.: 12707500XXXX  

Aiwa CT Z110 User Manual
Alpine TME M710 User Manual
Black Box 645 DSP User Manual
Canon Digital Camera EOS 50D User Manual
Canon MLT (F) User Manual
Crown Boiler BWC120 User Manual
Eclipse Fujitsu Ten Car Satellite Radio System CD5433 User Manual
Focal Polyglass 100 VRS User Manual
HP (Hewlett Packard) LCD Monitor L1710 User Manual
JVC GR HD1 User Manual