Owner’s Manual
Universal Series Kitchen Machines
for models:
MUM 6610 UC • MUM 6622 UC
MUM 6630 UC
READ THIS MANUAL
thoroughly for important safety and operating
instructions before using this appliance.
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS .................................................................. 2
Table of contents..................................................................................... 3
ABOUT YOUR KITCHEN MACHINE ....................................................... 4
Bosch Universal Series Kitchen Machine ................................................ 4
Unpacking............................................................................................... 4
Electrical specifications ............................................................................ 4
Before using for the first time .................................................................. 4
Getting to know your Bosch Kitchen Machine .......................................... 4
Special accessories ..................................................................... 6
Power unit features ................................................................................. 6
Getting started ..................................................................................... 7-9
STANDARDATTACHMENTS ................................................................... 9
Mixing bowl w/twin beating whisks and dough hook ................................ 9
How to use dough hook ......................................................... 10-11
Placing into operation with dough hook....................................... 11
How to use twin beating whisks .................................................. 11
Use of mixing bowl with twin beating whisks............................... 11
Operation with dough hook and whisk assembly.......................... 12
Placing into operation with twin beating whisks .......................... 13
Care and cleaning of bowl and its accessories ........................... 14
Blender with unbreakable plastic jar ........................................................ 14
How to use blender...................................................................... 15
Placing blender into operation...................................................... 16
Example of use of blender ........................................................... 16
Care and cleaning of blender........................................................ 17
Slicer/shredder with unbreakable bowl and “Universal” beater ................. 17
Slicer/shredder, intended use ...................................................... 18
Placing slicer/shredder into operation .......................................... 19
How to use “Universal” beater ..................................................... 20
Placing into operation with “Universal” beater .............................. 21
Care and cleaning of slicer/shredder with “Universal” beater ......... 21
Stainless steel bowl with dough hook ..................................................... 22
How to use dough hook ............................................................... 22
Use of stainless steel bowl and dough hook ................................ 22
Placing into operation with dough hook....................................... 23
Care and cleaning of stainless steel bowl ................................... 23
SERVICE and REPAIR .......................................................................... 24
TROUBLESHOOTING ................................................................. 25
SAMPLE RECIPES .......................................................................... 26-27
SPECIALACCESSORIES ..................................................................... 28
BOSCH small appliance warranty ........................................................... 31
HOUSEHOLD USE ONLY
3
Unpacking
ABOUT YOUR KITCHEN MACHINE
Carefully remove the power unit from its
packaging and place it on the counter so it
is ready to use. As you remove the
accessories from the carton, check them
against figure 1 to assure that all the
standard parts are present.
Congratulations on having selected one of
the Bosch Universal Series Kitchen
Machines.Aseries of kitchen machines that
we and—thankfully—cooking professionals
the world over, feel are the best household-
type kitchen machines available.
Electrical Specifications
Check to make sure that the voltage on
which your kitchen machine is to operate
is the same as specified on the rating plate.
Standard North American models have an
electrical power rating of 700-watt maximum
power rating with the attachment that draws
the most power (some attachments may
draw less power).
As you read through these instructions,
please pay particular attention to the
IMPORTANT SAFEGUARDS. Specific
safeguards for the attachments, as well as
warnings and cautions, are provided in each
section describing the operation of that
particular attachment.
Before Using for the First Time
Bosch Universal Series Kitchen
Machine
The Bosch Universal Series Kitchen
Machine is available in 3 models:
Before using any of the attachments for the
first time it is recommended they be washed,
rinsed well and dried. Of the attachments
supplied with the systems in this manual,
all parts, except the whisk holder for the
twin beating whisks and the blender’s
blade/base assembly, are dishwasher safe:
• The MUM 6610 UC
comprised of the electronic power unit
with integral cord storage, six-quart
capacity mixing bowl, splash ring and
cover (MUZ 6 KR3), twin beating whisks,
dough hook and motor drive cover.
> The whisk holder should be hand
washed in warm soapy water, rinsed
and dried.
> The blender’s blade/base assembly
should be washed under running water
and dried.
• The MUM 6622 UC
comprised of the electronic power unit
with integral cord storage, six-quart
capacity mixing bowl, splash ring and
cover (MUZ 6 KR3), twin beating whisks,
dough hook, six-cup capacity blender
(MUZ 6 MX2) and motor drive cover.
Note: It is recommended that the
blender’s blade/base assembly
never be left to stand in water or
soap solution, to prevent the bearing
lubricant from being washed out.
• The MUM 6630 UC
Getting to Know Your Bosch Kitchen
Machine
comprised of the electronic power unit
with integral cord storage, six-quart
capacity mixing bowl, splash ring and
cover (MUZ 6 KR3), stainless steel
mixing bowl (MUZ 6 ER1), twin beating
whisks, dough hook, slicer/shredder
(MUZ 6 RR2) with universal beater (MUZ
6 RG3) and motor drive cover.
The Bosch Universal Series Kitchen
Machines are comprised of various
attachments, depending on the system
purchased (see above). In addition to the
attachments listed on the previous pages
that are available with the standard systems,
Bosch offers many special accessories.
4
MUM 6610 UC
MUM 6622 UC
MUM 6630 UC
Figure 1
5
Electronic speed control
Special Accessories
Five-position rotary switch (figure 2a) is
located at the front of the power unit: 3
speeds plus a momentary pulse function
and a stop position “O/Off,” see figure 2a.
To allow you to get the most service from
your Bosch Universal Series Kitchen
Machine, Bosch engineers have designed
a line of special accessories to expand the
usefulness of your machine. In addition to
the attachments that come with the various
Universal Series Kitchen Machines, there
are optional accessories that can be ordered
separately. These accessories include a
food and meat grinder, grain mills and citrus
juicer, plus additional attachments that can
be used with the meat grinder: fancy cookie
attachment, fruit pulper, pasta-making disks
and grater attachment. See SPECIAL
ACCESSORIES, at the back of this
booklet, page 28. Or, to view all currently
available accessories, visit our Web site at
Built-in Safety Cutout
The Universal Series Kitchen Machines are
provided with a built-in safety cutout switch
(figure 2b) to protect the motor against
overheating.
If the safety cutout trips:
a. Turn the machine to the off position
“O/Off” and unplug.
b. Wait a few minutes to allow the motor
to cool.
c. Depress the manual reset button.
You will find the reset button on the
bottom of the machine, see figure
2b.
After allowing the machine to cool and
resetting the safety cutout switch, the
machine is again ready for use. The motor
should then start when plugged in and turned
to one of its 3 speeds or when turned on
and placed in momentary contact position.
Our work on expanding the usefulness of
the Bosch Kitchen Machine is a continuing
process. If there is some type of accessory
in which you are interested in, that is not
included at the back of the book, please
either write us at:
Dual drives
The Universal Series Kitchen Machines
come with two drives:
•
Bosch Small Appliances
Customer Support
BSH HomeAppliances
5551 McFaddenAvenue
Huntington Beach, CA 92649
1. A high-speed drive directly coupled to
the motor, used to drive the blender, food
processor and other special
accessories.
2. A high-torque drive used to drive the
stirring/beating whisks, dough hook,
meat grinder and other special
accessories.
or call us at:
•
1 (866) 44BOSCH
[1 (866) 442-6724]
Power Unit Features
Motor drive cover
All MUM 6000 power units have the following
features, refer to figure 2:
Used to cover drive that is not in use, see
figure 2c.
700-watt motor
Convenient cord storage
The most powerful motor offered with any
household kitchen machine.
Convenient cord storage is located on the
back of the power unit, see 2d.
6
Integrated hand grips
Getting Started
The operation of your Bosch Universal
Series Kitchen Machine is summarized
below.
Side recesses molded into each end of the
power unit housing provide for easy lifting
and carrying of power unit when not in use,
see 2e.
Specific instructions for using each of the
attachments, provided with the kitchen
machine systems covered by this manual,
follow the summarized instructions. Please
read the specific instructions thoroughly
before using that attachment, paying
particular attention to the IMPORTANT
SAFEGUARDS and WARNINGS provided.
Four rubber feet
Four rubber feet provide the ultimate in
stability, while also serving to isolate the
power unit from the hard surface to minimize
noise and vibration.
Figure 2.
7
1. Place power unit on suitable work
surface.
rotary switch at the front of the power
unit. See figure 2a. The rotary switch
has five positions:
Before using the machine with any of
the attachments, the power unit should
be placed on a suitable work surface.
The surface should be sturdy, smooth
and clean; make sure that there is no
flour or oil on the surface. A clean,
smooth surface will provide the best
footing for the suction cup feet on
the power unit and will limit slipping
and/or “walking.”
a. “M,” a momentary “pulse” position
that provides full speed and power
for the time it is held in position.
b. “O/Off,” the off position.
c. Four speeds labeled 1, 2 and 3.
Speed 1 is the lowest speed. The
speed increases with each
succeeding step up to the highest
speed, speed 3.
2. Plug power unit into power supply.
Unwind the power unit’s cord to
appropriate length and plug it into
a convenient nearby receptacle.
All models of the Bosch Universal
Series Kitchen Machines incorporate
a built-in safety cutout switch to
protect the motor against overheating.
If the safety becomes activated, the
power unit will stop. If power unit
should stop even though there is power
to the unit see TROUBLESHOOTING
at the back of this manual .
3. Remove motor drive cover.
If necessary, remove motor drive cover
from drive that will be used and place
it on drive that will not be used. The
cover, when placed on the high-speed
drive, can be locked in position by
pressing down and turning
counterclockwise, see figure 2c.
6. Turn power unit off.
When your work with the attachment
is completed or the capacity of the
batch-feed attachment has been
reached, turn the power unit to the Off
position, “O/Off,” and unplug.
4. Select attachment to be used.
Select the attachment you wish to use
and place on power unit. See specific
instructions for attachment selected.
Specific instructions are located on
pages listed below:
7. Remove the attachment.
Remove the attachment from the
power unit, per instructions for the
specific attachment being used.
Attachment
Pages
Mixing bowl w/dough hook ........ 9–11
Mixing bowl w/twin whisks ....... 11–14
Blender ..................................... 14–17
Slicer/shredder ......................... 17–21
Stainless steel bowl................. 22–23
8. Continue use.
If the attachment was of the batch-feed
type and you wish to continue using
the attachment, empty the bowl or jar
of the attachment per its specific
instructions and reinstall the
attachment as before. Repeat steps
5 through 7 as often as necessary to
complete work.
Table 1.
5. Operate unit with rotary switch.
Once the attachment is in place, the
speed of its moving components can
be controlled through the use of the
8
STANDARDATTACHMENTS
9. Work completed,
Following are the specific instructions for
the standard attachments provided with the
Bosch Universal Series Kitchen Machines
covered by this manual.
remove attachment.
If the attachment is of the continuous
feed type or is the batch type and you
have completed the work you wished
to perform with the attachment,
remove the attachment from the power
unit per the instructions for the specific
attachment being used.
Mixing Bowl with Twin Beating Whisks
and Dough Hook
(MUZ 6 KR3)
10. Place contents (batch-feed type).
If the attachment is the batch feed
type, disassemble per the specific
attachment’s instructions and place
the contents in a suitable container.
WARNING
1. There is a risk of injury from rotating
tools when using the mixing bowl with
the dough hook or the twin beating
whisks.
11. Care and cleaning.
2. Avoid contact with moving parts. Keep
hands, hair and clothing, as well as
spatulas, bowl scrapers and other
utensils away from dough hook and
whisks during operation to prevent
injury and/or damage to the power unit
or accessories.
Once you have completed working
with the Bosch Kitchen Machine, the
next step is to disassemble and clean
the attachments. If you wish to use
another attachment, please return to
step 4, above.
3. Always work with the bowl lid and
splash ring fitted in place.
4. Do not change tools until the power unit
has come to a complete stop; when
switched Off, the power unit will continue
to turn for a brief period.
Power unit
With the power unit turned Off and
unplugged, it should be cleaned only with
a clean, damp cloth. Then wipe off the motor
drive cover and reinstall on the power unit.
Never use coarse or caustic cleaning
products to clean the power unit. Never
immerse the power unit in water.
All models of the Bosch Universal Series
Kitchen Machines are provided with a six-
quart mixing bowl with twin beating whisks
and dough hook. The MUM 6630 UC also
comes with a stainless-steel bowl MUZ 6
ER1, see figure 1. If additional mixing bowls
are desired, they are available as accessory
items under the part numbers: MUZ 6 ER1
and/or MUZ 6 KR3, refer to the SPECIAL
ACCESSORIES section at the back of this
manual. The mixing bowl with dough hook
and twin beating whisks consists of the
following components, dependent upon the
system you have, see figure 3:
The power unit may be left on the counter
or stored for future use. If the unit will be
stored, wind the cord around the cord holder
and, using the carry grips, lift the power
unit and place in your chosen storage area.
Attachments
The attachment(s) that have been used
should be disassembled and washed, per
their specific instructions, dried and stored
for future use.
9
surface and switched to the Off position,
“O/Off,” and that you have, if necessary,
moved the motor drive cover to the drive
that will not be used.
1. Before using the mixing bowl and
dough hook for the first time, it
is recommended that the bowl,
cover, splash ring and dough hook be
washed.All components of the mixing
bowl and the dough hook are
dishwasher safe. Or they may be
washed in warm soapy water. After
washing, rinse well and dry before
using.
2. If you have not already done so, move
the motor drive cover to the high-speed
drive. Place the mixing bowl on the drive
of the power unit and turn the bowl
counterclockwise with a slight
downward pressure until bowl is firmly
seated, see figure 4a.
Figure 3.
3a. Bowl with cover and splash ring
3b. Dough hook
Figure 4.
3c. Twin beating whisks
CAUTION
How to Use Dough Hook
Failure to make sure that the bowl is
properly seated on the drive coupling before
the power unit is turned On can result in
damage to the bowl and/or coupling.
The dough hook and mixing bowl are
intended to be used to knead yeast doughs
and to mix cookie and pastry doughs, and
also when adding nuts, chocolate chips,
dried fruit, hard butter or shortening,
hardened brown sugar, etc. to batters.
3. Engage the dough hook on the
driveshaft of the mixing bowl by placing
it over the center column, as shown in
figure 4b. Once in place, check to make
sure dough hook has engaged the
driveshaft by turning the dough hook
Use of mixing bowl with dough hook
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
10
clockwise while pushing down until it
stops.
How to Use Twin Beating Whisks
All Bosch Universal Series Kitchen
Machines come with a twin beating whisk
assembly, see figure 4c.
4. Place the splash ring on the bowl,
making sure the tabs on the bowl fit
into the recesses in the splash ring,
and turn counterclockwise, see figure
5a. Then place the cover on the splash
ring so that the tabs on the splash ring
fit into the recesses in the bowl cover
and turn the cover counterclockwise to
fasten the bowl cover to the bowl. See
figure 5b.
The twin beating whisks and mixing bowl
are intended to be used for very light
substances, such as cream, egg whites,
sauces, batters and light pastry doughs
that are thin enough to pour.
The dough hook should be used for all
heavier substances such as cookie doughs,
yeast doughs, pastry doughs and other
heavy doughs. The dough hook should
always be used when adding nuts,
chocolate chips, dried fruits, hard butter or
other fats, hardened brown sugar, etc. to a
mixture.
The splash ring and cover should be in
place whenever the power unit is in
operation. The splash ring and cover
serve to prevent the escape of flour
dust at the beginning of the stirring and
kneading process, and also serves to
prevent accidental contact with the
moving dough hook.
Use of mixing bowl with twin beating whisks
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable surface and
switched to off position, “O/Off,” and that
you have moved the motor drive cover.
1. Before using the mixing bowl and twin
beating whisk assembly for the first
time, it is recommended that the bowl,
anti-splash cover, filling funnel cap and
twin beating whisk assembly be
washed. All components of the mixing
bowl and the twin beating whisk
assembly are dishwasher safe, except
the whisk holder.
Figure 5.
Placing into Operation w/Dough Hook
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to the Off position, “O/Off.” Unwind
the electrical cord to the necessary length
and plug into a convenient outlet. The mixing
bowl with dough hook is now ready for
operation. See table 1 for examples
demonstrating the use of the dough hook
attachment. Sample recipes may also be
found in the recipe section, at the back of
this manual.
The whisks may be removed from the
whisk holder as shown in figure 7a, and
washed in the dishwasher along with
the mixing bowl and other components.
The whisk holder should be washed in
warm soapy water.After washing, rinse
well and dry the whisk holder before
reattaching the whisks as shown in
figure 7b.
11
OPERATION WITH DOUGH HOOK AND WHISK ASSEMBLY
Below you will find a table listing examples of how the dough hook and the whisk
assembly are to be used for various typical applications.
Attachment Ingredients
Speed Time
Max.
Amount
Twin beating
whisks
Egg whites (2)
3
2 min.
(approx.)
20 eggs
(approx.)
Whipping cream
3
2 min.
6 cups
(approx.)
Sponge cake (any recipe)
Combine all ingredients
Whip
1
3
3x basic
recipe
(6 layers)
1/2 min.
4–6 min.
Fold in flour mixture
Mix
M
(pulse)
3
3 min
(approx.)
Basic cake batter
Combine all ingredients
1
3
1/2 min.
3 min.
3x basic
recipe
(6 layers)
Mix
Twin beating
whisks/dough
hook
Cookie dough
Cream soft butter or shortening
and sugar using twin
beating whisks
1
1/2 min.
3x basic
recipe
(9 dozen
cookies)
Combine flour alternately with
liquid using dough hook
Stir in nuts, chocolate chips,
etc. using dough hook
3
3 min.
(approx.)
2 or 3
Dough hook
Yeast dough
Combine all wet ingredients
Add flour in portions
1
1/2 min.
5 min.
3x basic
recipe
1 or 2
(approx.)
(10, 1 lb.
loaves)
Table 1. Examples of operation using whisk assembly and dough hook. Speed 1 should
be used for initial stirring and combining. Place all ingredients into the mixing bowl, liquids
first. Shortening must be soft (room temperature).
12
2. If you have not already done so, move
the motor drive cover to the high-speed
drive. Place the mixing bowl on the drive
of the power unit and turn the bowl
counterclockwise with a slight
downward pressure until bowl is firmly
seated, see figure 4a.
The splash ring and cover should be in
place whenever the power unit is in
operation. The splash ring and cover
serve to prevent the escape of flour
dust at the beginning of the stirring and
kneading process, and also serves to
prevent accidental contact with the
moving whisks.
CAUTION
Failure to make sure that the bowl is
properly seated on the drive coupling before
the power unit is turned on can result in
damage to the bowl and/or coupling.
Placing into Operation w/Twin Beating
Whisks
Make sure that the switch is in the off
position, “O/Off.” Unwind the electrical cord
to the necessary length and plug into the
wall outlet. The bowl with whisk assembly
is now ready for operation. See table 1 for
examples demonstrating the use of the twin
beating whisks.
3. Place and engage the twin beating
whisk assembly on the driveshaft of the
mixing bowl as shown in figure 6.
Mixing bowl tips:
1. When using the mixing bowl to knead
or mix a recipe designed to be
prepared by hand, you will find that with
the Bosch Kitchen Machine you can
usually place all the ingredients in the
mixing bowl at once. When doing this,
always place the liquids in first. This
will assure more thorough mixing.
2. When adding ingredients to a mixture:
a. Turn the rotary switch to a lower
speed;
b. Remove the cover from the splash
ring;
Figure 6.
c. Add the ingredients through the
cover opening and replace the
cover.
4. Place the splash ring on the cover,
making sure the tabs on the bowl fit
into the recesses in the splash ring,
and turn counterclockwise, see figure
5a. Then place the cover on the splash
ring so that the tabs on the splash ring
fit into the recesses in the bowl cover
and turn the cover counterclockwise to
fasten the bowl cover to the bowl. See
figure 5b.
3. If a large batch of dough is to be left in
the mixing bowl and allowed to rise, the
cover and splash ring should be
removed and placed loosely on the bowl
so that it is free to move if the dough
should begin to press on it.
13
Blender with Unbreakable Plastic Jar
(MUZ 7 MX1)
Removing Contents
Before beginning to remove the contents
from the mixing bowl, make sure that the
power unit has been turned to the Off
position, “O/Off.” Remove the cover and
splash ring by turning clockwise and lifting
off. Once the cover and splash ring have
been removed, the dough hook or the twin
beating whisks may be removed by turning
the hook or whisk assembly clockwise while
lifting.
WARNING
1. There is a risk of injury from sharp
blades when using the blender
attachment.
2. Keep hands and utensils out of the
blender jar while it is attached to the
power unit.
3. Blades are sharp. Handle carefully.
4. To avoid injury, never place blade
assembly on power unit without
blender jar properly attached.
The mixing bowl can be removed from the
power unit by turning the bowl clockwise
while lifting.
5. Always operate the blender with the
cover in place. Always hold cover in
place while operating the blender to
prevent cover from coming loose.
6. The use of attachments, including
canning jars, not recommended by
the manufacturer, may cause a risk
of personal injury.
The contents may now be used as desired.
Care and Cleaning
of Bowl and Its Accessories
Except for the whisk holder and the dough
hook, the mixing bowl and its accessories
are dishwasher safe.
7. When blending hot and/or frothing
liquids, process a maximum of 18 fluid
ounces (0.5 litres) at a time.
It is recommended that the whisk holder
and the dough hook be washed by hand in
warm soapy water, rinsed well and dried
after each use. The whisks can be removed
from the whisk holder by simply pulling them
off, see figure 7a.
Figure 7.
After washing, rinsing and drying, the
whisks may be placed back on the whisk
holder by reversing the action to remove
them, see figure 7b. Press them on until
they snap into place.
Figure 8.
The power unit of the kitchen machine
should be cleaned using a clean, damp
cloth only. Never use coarse or caustic
cleaning products to clean this appliance.
Never immerse the power unit in water.
8a. Cover closure/funnel
8b. Cover
8c. Blender jar
8d. Gasket
8e. Blade/base assembly
14
The MUM 6622 UC Bosch Universal Series
Kitchen Machine includes the MUZ 6 MX2
blender accessory. The blender accessory
consists of, figure 8.
How to Use Blender
The blender has been designed for crushing
ice; mixing liquids; pureeing vegetables;
preparing special diet and infant foods;
pulverizing fruit, vegetables, nuts and dried
bread (for bread crumbs); and preparing
mayonnaise and sauces.
Figure 9.
Before beginning to use this or any other
attachment, make sure that the power unit
is on a clean, smooth, suitable work
surface and switched to off position, “O/Off,”
and that you have removed the motor drive
cover.
2. To assemble or reassemble blade/base
assembly into the blender, insert the
blade/base assembly into the blender
jar and press down on the blade/base
assembly. Turn clockwise to the stop,
see figure 11. The blade/base assembly
is then back in place.
1. Before using the blender for the first
time, it is recommended that the
blender jar cover, closure/funnel and
blade/base assembly be washed. All
components, except the blade/base
assembly, are dishwasher safe.
Remove the blade/base assembly from
the blender, see figure 9.
CAUTION
Blade/base assembly is very sharp.
Handle with care.
The blade/base assembly may be
easily removed by inverting the blender
and using the blender cover to fit over
the tabs on the blade/base assembly.
Turn it counterclockwise until it stops,
see figure 9a, and then lift up, figure 9b.
Figure 10.
Wash the blade/base assembly under
running water. Do not place the blade/
base assembly in the dishwasher or
allow it to stand in water. This will tend
to wash out the lubricant. After
cleaning, rinse thoroughly and dry
before using.
3. If you have not already done so, move
the motor drive cover to the high-speed
drive. Place the blender on the high-
torque drive of the power unit and turn
the blender counterclockwise with a
slight downward pressure until the jar
is firmly seated, see figure 11.
15
Example of Use of Blender
To familiarize you with the operation of the
blender, a sample recipe for mayonnaise is
provided below:
Mayonnaise Recipe
1
whole egg
1/3 cup of vegetable oil
2
1
tablespoons lemon juice or light
vinegar
teaspoon sugar
1/2 teaspoon dry mustard
1/2 teaspoon of salt
2/3 cup of vegetable oil
Mix all ingredients, except final 2/3’s cup
of oil, for a few seconds at speed 1, then
quickly pour the oil in through the opening
in the cover in a uniformly thick stream, as
shown in figure 14b. Operate the blender at
speeds 1 or 4 until mixture is thick and
smooth (approximately 10-20 seconds).
Makes 1 1/4 cups.
Figure 11.
Placing Blender into Operation
Make sure that the switch is in the off
position, “O/Off.” Unwind the electrical cord
to the necessary length and plug into wall
outlet. The blender is now ready for
operation.
Normally when blending, the blender jar
should be filled with the entire amount of
material to be blended, if possible, before
switching the appliance on. The cover and
cover closure should always be in place after
filling the blender jar and before switching
the power unit to On. Any subsequent
additions to the blended material should be
made through the cover opening, see figure
12. For solids and/or granular material,
remove the cover closure/funnel to add the
material, as shown in figure 12a. For liquids,
the closure/funnel may be left in place and
the liquids added by pouring it into the
closure/funnel, see figure 12b.
Figure 12.
Tips:
The blender should be operated with careful
consideration as to what is required and/or
desired. The speed at which the blender is
operated and the length of operation for a
given job will depend upon the degree of
fineness desired or the amount being
blended.
16
|