®
ELECTRONICS CORP.
PICTURE
VOLUME
–
MENU
+
VOH1041DL
10.4” LCD
OVERHEAD
MONITOR
OWNER’S
MANUAL
FEATURES
Congratulations on your purchase of the Audiovox
VOH1041DL drop down Video Monitor. The
VOH1041DL has been designed to give you and you
family many years of video entertainment in the mobile
environment. Please read the directions that follow to
• 10.4” TFT (Thin Film Transistor) Active Matrix LCD
(Liquid Crystal Display) Monitor
• OSD (On Screen Display) For Control Of Picture
Quality And Functions
r
familiarize yourself with the product and to ensure tha
t
• Full Function Remote Control
you obtain the best results from your equipment.
NOTE: Installation options vary. See the individual
Owner’s Manuals for each component in your system to
obtain a full understanding of each component’s
operation.
• Remote Sensor Eye
• Two Audio / Video Inputs
• Speaker Amplifier
• Back-Lit Controls For Low Light Operation
• Infrared Wireless Headphone Transmitter
• Dual Dome Lights
• RF Transmitter jack (for use with optional RF
Transmitter) ( Part # WTXRF01)
SAFETY PRECAUTION
For safety reasons, when changing Video Media it is
recommended that the vehicle is not in motion, and that
you do not allow children to unfasten seat belts to
change Video Media or make adjustments to the
system. System adjustments can be accomplished
using the Remote Control while seat belts remain
fastened. Enjoy your Audiovox entertainment system
but remember safety of all passengers remains the
number one priority.
-2-
FRONT PANEL FEATURE
Figure 1
9
1
2
3
4
5
6
8
7
9
PICTURE
VOLUME
+
MENU
–
-3-
FRONT PANEL FEATURES – See Figure 1
7. Volume Up/Down – Controls volume to external
1. Power Button – (Bright red when system is ON,
Speakers or headphone jacks if connected.
dim when system is OFF).
8. Infrared Transmitter – Used to transmit audio to
2. Picture Up/Down – Press these buttons to make
adjustments in the picture select mode and to
change sources in input Select mode.
Wireless Headphones.
9. Dome Lights
–
Provide additional interior
illumination.
3. Menu – Press the MENU button. The MENU
display appears.
Use the MENU button to
highlight the desired function.
4. Sensor Eye – Allows remote control of the
VOH1041DL’s OSD system (On Screen Display)
and for control of Video Media Player and other
accessories.
5. Three Position Dome Light Switch
• Auto – Automatically switches on the dome lights
in conjunction with the vehicle’s interior
illumination.
• Off – The Dome lights will not turn on in this
position.
• On – Turns on the Dome lights.
6. Screen release – Slides in the direction of the
arrow to release the drop down screen.
-4-
REMOTE CONTROL OPERATION
-
MUTE
POWER
SOURCE
1
5
6
BATTERY INSTALLATION
Before attempting to operate the Remote Control,
install the batteries as described below.
1) Turn the Remote Control face down. Press
down on the ridged area of the battery cover, and
slide it off.
2) Install Two “AAA” batteries as shown. Make sure
that proper polarity (+ or -) is observed.
3) Slide the cover back until it clicks into position.
PIC
2
7
VOL.
–
VOL.
+
MENU
3
PIC
4
9
VCP POWER
PLAY
STOP
The Remote Control will operate the VOH1041DL,
and Audiovox VCP’s. It is not a universal remote
REW
F.FWD
REPLAY
8
11
12
10
control and will not control equipment from othe
r
manufacturers.
If a universal Remote Control is used with the
VOH1041DL, choose the remote control encoding
scheme
for
Audiovox
Televisions
when
programming the remote.
-5-
REMOTE CONTROL OPERATION
Monitor Controls :
1. POWER
Press this button to turn on the set. Press the
8. “REW” REWIND BUTTON*
If this button is pushed while the tape is
stopped, the tape will rewind. If this button is
pushed while the tape is playing, the VCP will
go into rewind search mode.
button again to turn the VOH1041DL off.
2. PICTURE UP/DOWN BUTTONS
Use these buttons to make adjustment in the
picture select mode and AV source select.
9. PLAY BUTTON*
Press this button to activate play mode while a
Video Tape is loaded into the VCP. This button
may also be used to disengage search and
pause modes. For more information, consult
the VCP owner’s manual.
3. VOLUME UP/DOWN BUTTONS
Use these buttons to raise or lower the volume
level of the External Speakers or headphone jacks
if installed.
10 “FFWD” FAST FORWARD BUTTON*
If this button is pushed while the tape is
stopped, the tape will fast forward. If this
button is pressed while the Video Tape is
playing, the VCP will go into fast forward
search mode.
4. MENU Button
Press the MENU button. The MENU displa
appears. Use the MENU button to highlight the
desired function.
y
5. MUTE Button
Press this button to turn the TV sound off. Press
the button again to restore the sound to the
previously set level. MUTE may also be released
by pressing the VOLUME +/–.
11. STOP BUTTON*
Press this button to stop the Video Tape.
12. REPLAY BUTTON*
6. SOURCE Button
Pressing this button will rewind the Video Tape
and immediately begin playback when the
Video Tape is fully rewound.
Press this button to select AV1 or AV2.
VCP Controls
7. VCP POWER BUTTON
*Consult the VCP owner’s manual for more
information.
This button is used to turn an optional
AUDIOVOX VCP ON and OFF.
-6-
3. Adjusting the level :
ADJUSTING THE PICTURE
a) Press PICTURE M to decrease the brightness.
When watching the VOH1041DL, the quality of the
picture can be adjusted to suit your taste.
CONTRAST
BRIGHTNESS
TINT
1. Press MENU. The menu appears as below.
R
G
B
COLOR
INPUT SELECT
RESET
CONTRAST
EXIT
EXIT OSD
–
+
BRIGHTNESS
TINT
R
G
B
COLOR
b) Press PICTURE L to increase the brightness.
INPUT SELECT
RESET
CONTRAST
BRIGHTNESS
EXIT
EXIT OSD
TINT
–
+
R
G
B
COLOR
INPUT SELECT
RESET
EXIT
2. Select the item to adjust. For example :
To adjust brightness, press MENU until the
highlight bar is on BRIGHTNESS.
EXIT OSD
–
+
4. To select INPUT SELECT, press MENU until the
highlight bar is on INPUT SELECT, press
CONTRAST
PICTURE L or M to select either AV1 or AV2.
BRIGHTNESS
TINT
CONTRAST
BRIGHTNESS
TINT
CONTRAST
BRIGHTNESS
TINT
R
G
B
COLOR
Press either
PICTURE L
or M to select
AV2
INPUT SELECT
RESET
R
R
G
B
G
B
COLOR
COLOR
INPUT SELECT
RESET
INPUT SELECT
RESET
EXIT
EXIT OSD
EXIT
EXIT
EXIT OSD
AV1
EXIT OSD
AV2
–
+
-7-
TURNING THE VOH1041DL ON AND OFF
1. Sliding the screen release lock forward will
unlock the screen and it will drop down slightly.
(Pivot the screen downward until a comfortable
viewing angle is reached). After the unit has
been turned on and is displaying a picture,
adjustment to the viewing angle can be made by
pivoting the screen to optimize the picture quality.
The internal friction detent will hold the screen in
position while the system is in use.
5. To adjust other items, repeat all of the above.
Note : The menu display disappears from the
screen if you do not press any key within a few
seconds.
Description Of Adjustment Items :
2. Pressing the power button on the pod or remote
will alternately turn the system on or off. When in
use the internal back lighting will illuminate the
controls.
3. Remember to turn the unit off and pivot the
display screen to the locked position when not in
use.
ITEM
Adjustment
Press PICTURE L to Press PICTURE M to
Decrease picture contrast for Increase picture contrast for
CONTRAST
soft color
vivid color
Darken the picture
Brighten the picture
BRGHTNESS
TINT
Make skin tones becomes Mark skin tones becomes
Reddish
Greenish
Decrease color intensity
Increase color intensity
COLOR
To restore the factory settings
Select picture while the main menu is displayed. Then
highlight “RESET” and press either PICTURE L or M.
All the picture functions (CONTRAST, BRIGHTNESS,
TINT, COLOR) will go back to the factory settings.
-8-
REMOTE INFRARED SENSOR/REPEATER
OPERATION
The VOH1041DL incorporates a Infrared Sensor which
relays the signals from the Remote Control to allow the
VOH1041DL to be controlled simply by pointing it’s
Remote Control at the remote sensor. This provides
control of auxiliary equipment such as an Audiovox
VCP or DVD Player. The Remote Infrared Sensor can
relay signals from most manufacturers Remote Control
to its respective component connected to the Video 1
and 2 inputs. In this case you must use the Remote
Control supplied with the other manufacturers
component.
OVERHEAD DOME LIGHTS
A three-position slide switch controls the Dome
Lights on the VOH1041DL. Sliding the switch to the
ON position will turn the Dome Lights ON. The OFF
position will prevent the Dome Lights from turning on
at all times and the auto position will allow the Dome
Lights to turn ON and OFF with the vehicle’s interior
lighting. Do not leave the vehicle unattended with
the Dome Lights switch in the ON position, as this
could result in a discharged battery.
Dome Light
Dome Light Switch
Dome Light
Remote Infrared Sensor
PICTURE
VOLUME
–
MENU
+
PICTURE
VOLUME
–
MENU
+
-9-
OPTIONAL ACCESSORIES
WIRELESS HEADPHONES
WIRED FM MODULATOR (P/N FMM100)
Your video system may be equipped with an optional
RF modulator (Audiovox FMM100), that allows you to
listen to the VOH1041DL’s audio signal by tuning
your vehicle’s radio to the selected frequency, (88.7
or 89.1- check with your installer) and turning on the
The VOH1041DL includes
a
built in Infrared
Transmitter for use with Audiovox Wireless
Headphones (P/N MVIRHS). Turning the Headphone
switch ON will activate the internal IR Receiver, the
volume can then be adjusted using the controls on
each headset. Any number of wireless headphones
can be used, but all must be within a line of sight from
the transmitter, as infrared transmissions, like visible
light travel only in a straight line.
remote mounted RF modulator switch. (In mos
cases this toggle switch will be located underneath
the driver’s side of the dash, check with your installe
for the exact location.) Whenever the RF Modulato
t
r
r
is ON, broadcast radio reception will be poor.
Turning the remote mounted toggle switch OFF will
allow for normal radio reception.
The VOH1041DL has a Jack labeled “to FM
Transmitter”, this Jack is for connection of an optional
A
udiovox RF Transmitter (P/N WTXRF01). This
VIDEO OUTPUT
Transmitter is for use with the Audiovox Wireless RF
Headphones (P/N WHPRF01).
The VOH1041DL provides a video output for an
optional Video monitor(s). This output will provide a
Consult the documentation accompanying the
Audiovox Wireless Headphones for more information.
video signal that duplicates the signal displayed b
y
the VOH1041DL to an additional Monitor or Video
display.
Please see your installer for more
information.
-10-
TYPICAL SYSTEM CONNECTIONS
Negative Dome Light Switching
Lamp Auto
Constant 12V
Lamp On
Purple/Brown
Black/Red
1
2
Red/Black
3
4
5
Positive Dome Light Switching
6
10
12
Lamp Auto
Ground
Purple/Brown
Black/Red
7
8
9
Lamp On
Red/Black
14
13
17
16
15
PIN 1 – Power -Red
PIN 2 – Power GND -Black
PIN 3 – Dome Light Auto -Purple/Brown
PIN 4 – Lamp Common -Black/Red
PIN 5 – Dome Light On -Red/Black
PIN 6 – Line Out (L) -White
Accessory
Harness
PIN 7 – Spk Out (R) -Green
PIN 8 – Spk Out-GND -Black
PIN 9 – Spk Out (L) -Grey
PIN 10 – Video Out -Yellow
PIN 11 – Video GND -Black
IR Transmitter LED
2 PIN IR
Connector
PIN 12 – Line Out (R) -Red
PIN 13 – Power 12V(FM Trans.) -Red
PIN 14 – Power GND (FM Trans.) -Black
PIN 15 – Audio (L) Out (FM Trans.) -White
PIN 16 – Audio GND (FM Trans.) -Black
PIN 17 – Audio (R) Out (FM Trans.) -Red
PIN 18 – Line Out GND -Black
Yellow RCA(Video)
White RCA(Audio Left)
Red RCA(Audio Right)
4 PIN
Power
Connector
-11-
Troubleshooting
Specifications
PROBLEM
SOLUTION
LCD Brightness
300 nits (min)
Poor radio reception (FM
modulator installed)
•
•
•
Check the condition of the
vehicle’s radio antenna.
Verify that the antenna is fully
raised
If a wired RF modulator has
been installed, verify that it’s
switch is turned to the off
position
Resolution SVGA
800 x 600
Operation Temperature
Storage Temperature
-10 ~ 65º C
(14 ~ 149° F)
- 40 ~ 85º C
(-40 ~ 185° F)
IR sensor inoperative
•
•
•
Verify that the batteries in the
remote are fresh
Verify that the remote eye is
not obstructed.
Video Display System
Audio Output
NTSC/PAL
1W @ 16Ω
2A
Verify
that
the
infrared
transmitter is affixed over the
sensor eye of the component
to be controlled
Current Draw
Weight
4.6 Lbs
Overall Dimensions
2.2 x 11 x 11.2 Inch
(H x W x D)
Voltage
12VDC
-12-
12 MONTH LIMITED WARRANTY
Applies to Audiovox Mobile Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product
or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date
of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge
for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g.
dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs
incurred for installation, removal or reinstallation of the product, or to damage to tapes, discs, speakers, accessories, or vehicle
electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged
through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial
number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION
FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY
BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other
than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so
the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which
vary from state to state.
U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 l 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
© Copyright 2002 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 11788
For Customer Service
Visit Our Website At
WWW.audiovox.com
Product Information, Photos,
FAQ’s Owner’s Manuals
© 2003 Audiovox Electronics Corp., Hauppauge, NY 11788
128-6678
|