FM 360 - 480 8x4 High Tipper
B Ride Suspension - Euro 4/5
Model Code FM 84R B3 CR
v
C
Chassis mounted
catalyst with
v
vertical tailpipe
B
1174
v
v
TP
D
1377
796
2495
1370
1995
A
TWB
Chassis Dimensions mm 1)
Tipper
A
Wheelbase .....................................................................................................................
5100
4788
4274
8562
715
5600
5288
4774
9062
715
TWB Theoretical wheelbase..................................................................................................
B
C
Centre of rear axle to back of cab................................................................................
Overall Chassis Length .................................................................................................
DMin Rear Overhang (Min) .....................................................................................................
D Max Rear Overhang (Max) ...................................................................................................
715
715
TP
Tipper hinge position .....................................................................................................
615
615
Largest possible fuel tank RHS with frame mounted catalyst (litres) ......................................
415
545
Chassis Weights kg 2)
Front Axle ...................................................................................................................................
Rear Bogie ..................................................................................................................................
Kerb Weight ................................................................................................................................
6700
3040
9740
6720
3050
9770
Turning Diameter mm
Turning Circle Diameter Kerb to Kerb ........................................................................................
Turnng Circle Diameter Wall to Wall..........................................................................................
20500 22100
22100 23700
Plated Weights kg 3)
Plated
Design
Gross Vehicle Weight
Gross Combination Weight
Front Axle 1
Front Axle 2
Drive Axle 1
32000
35500
7100
7100
9500
9500
37000
40500
8000
8000
10500
10500
Drive Axle 2
Important Notes
1) Chassis Dimensions
2) Chassis Weights
Chassis weight includes oil, water, 70 litres fuel, without Adblue and without
driver. Weights can vary ± 2% and vary depending on options chosen.
Cab Height: +96mm for sleeper cab L2H1, +533mm for Globetrotter L2H2.
Front axle to back of cab intake: +434mm for sleeper and Globetrotter cab.
Height can vary ± 20 mm for leaf suspension.
All dimensions are for unladen chassis.
Rear overhang used for vehicle weight calculation is the maximum rear overhang
(D Max) for selected wheelbase.
3) Plated Weights
To obtain 8000kg front axles 315/80R22.5 tyres must be specified.
For more detailed weight information, including optional equipment weights, ask
your Volvo sales contact to enter your specification into the Volvo Weight
Information system (WIS).
Weights and dimensions are based upon the following tyres -
Front:
Rear:
12R22.5
12R22.5
Do NOT use this drawing for bodybuilding.
Refer to Volvo Bodybuilder Instructions and chassis drawings
|