Samsung Aw1291l User Manual

OWNER’S  
INSTRUCTIONS  
AW0691L  
AW0891L  
AW1091L  
AW1291L  
AW1891L  
Window-type Room Air Conditioner  
(Cool)  
E
F
DB98-09672A(1)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions .........................................................................................  
Description of Each Component ....................................................................  
Remote Control - Buttons and display ............................................................  
Getting Started ...............................................................................................  
Inserting the Remote Control Batteries ..........................................................  
2
4
5
6
7
USING THE CONTROL PANEL ON THE UNIT  
OPERATING YOUR AIR CONDITIONER  
Cooling Your Room ........................................................................................  
Ventilating Your Room .................................................................................... 10  
Removing Excess Humidity ............................................................................ 11  
9
USING THE WIRELESS REMOTE CONTROL  
OPERATING YOUR AIR CONDITIONER  
Cooling Your Room ........................................................................................ 13  
Ventilating Your Rooms .................................................................................. 14  
Removing Excess Humidity ............................................................................ 15  
PROGRAMMING YOUR AIR CONDITIONER  
Setting the On Timer ...................................................................................... 16  
Setting the Off Timer ...................................................................................... 17  
Setting the Sleep Timer .................................................................................. 18  
Selecting Energy Saving mode ...................................................................... 19  
Adjusting the Air Flow Direction Horizontally .................................................. 20  
Adjusting the Air Flow Direction Vertically ...................................................... 20  
RECOMMENDATIONS FOR USE  
Temperature and Humidity Ranges ................................................................ 21  
Cleaning Your Air Conditioner ........................................................................ 22  
Solving Common Problems ............................................................................ 23  
Technical Specifications ................................................................................. 23  
E-3  
Description of Each Component  
The design and shape are subject to  
change, depending on the model.  
Air outlet  
Inner air flow blades  
(right/left orientation)  
Air outlet  
Outer air flow blades  
(up/down orientation)  
Ventilation lever  
Air inlet (Outside)  
Air inlet (Inside)  
Air filter (Inside)  
Power plug  
(The type of power plug  
may differ, depending on  
the local power supply.)  
Timer indicator  
Temperature/Timer  
settings  
Energy Saver indicator  
Remote control  
sensor  
Dry adjustment indicator  
On/Off button  
Fan speed adjustment  
button  
Mode selection button  
(Cool, Fan, Dry)  
Temperature  
adjustment buttons  
E-4  
Remote Control - Buttons and display  
Remote control  
transmission indicator  
Mode selection button  
(Cool, Fan, Dry)  
Operating mode  
(
Cool,  
Dry,  
Fan)  
Temperature adjustment  
buttons  
Temperature setting  
Sleep mode  
Sleep timer setting button  
Energy Saving mode  
Fan speed adjustment  
button  
Fan speed  
Energy Saving button  
On Timer setting  
Timer setting button  
Off Timer setting  
Timer Set/Cancel button  
On/Off button  
Battery discharge indicator  
E-5  
Getting Started  
You have just purchased a Samsung window-type room air conditioner which should be installed  
following your installation manual.  
Your Owner’s Instructions contain much valuable information on using your air conditioner.  
Please take the time to read them as they will help you take full advantage of the unit’s features.  
The booklet is organized as follows.  
The following figures are shown on pages 4 and 5:  
-
-
Description of Each Component  
Remote control (buttons & display)  
They will help you find the buttons and understand the symbols displayed.  
In the manual, you will find a series of step-by-step procedures for each function  
available.  
The illustrations in the step-by-step procedures use four different symbols:  
NOTE  
PRESS  
PUSH  
IMPORTANT  
E-6  
Inserting the Remote Control Batteries  
You must insert or replace the remote control batteries when :  
You purchase the air conditioner  
The remote control does not work correctly  
Use two AAA, LR03 1.5V batteries.  
Do not use old batteries or different kinds of batteries together.  
Batteries may be completely discharged after 12 months, even  
if they have not actually been used.  
1
2
Push the battery cover on the rear of the remote control with your thumb  
in the direction of the arrow and remove it.  
Insert the two batteries, taking care to respect the polarities :  
+ on the battery with + on the remote control.  
- on the battery with - on the remote control.  
3
Close the cover by sliding it back until it clicks into place.  
E-7  
Using the  
Control Panel  
on the Unit  
This chapter indicates how to operate and program  
your air conditioner with the control panel on the unit.  
E-8  
Cooling Your Room  
You must select the Cool mode if you wish to lower the temperature  
in your room. You can also set the Fan speed.  
Press the  
(On/Off) button.  
1
Result: The air conditioner starts up in the mode selected when the  
unit was last used.  
The unit beeps twice.  
The air conditioner is fitted with a protection mechanism to prevent  
the unit from being damaged when it is started immediately after  
being:  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
If the temperature is not displayed on the control panel:  
Press the  
button on the unit one or more times until the  
temperature is displayed.  
Result: The unit beeps each time you press the  
button.  
The air conditioner starts up in the Cool mode.  
You can change modes at any time.  
3
To adjust the temperature, press the  
or  
buttons on the unit one or  
more times until the desired temperature is displayed.  
The temperature can be set between 18°C and 30°C.  
Result: Each time you press the  
or  
buttons:  
– The temperature is adjusted by 1°C and displayed on  
the control panel  
– The unit beeps  
The air conditioner starts cooling, if the room temperature is  
higher than the selected temperature.  
If the room temperature reaches the set temperature, the air  
conditioner stops cooling, but the fan is still operating.  
4
To set the fan speed:  
Press the button on the unit one or more times until the  
desired the Fan speed(F1, F2 or F3) is displayed.  
Low  
Medium  
High  
5
To control the direction of the air flow, refer to page 20.  
E-9  
Ventilating Your Room  
If the air in your room is stale, you can ventilate the room using the Fan feature.  
1
If you wish to discharge stale air, push the ventilation lever on the front of the  
unit to the right and open position ( ).  
Result: The air inside the room circulates and stale air is discharged  
outside.  
Otherwise, push the ventilation lever to the left and closed position (  
).  
Result: The air simply circulates inside the room.  
2
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in the mode selected when  
the unit was last used.  
The unit beeps twice.  
3
If the fan speed(F1, F2 or F3) is not displayed on the control panel:  
Press the  
button on the unit one or more times until the fan speed  
(F1, F2 or F3) is displayed.  
Result: The unit beeps each time you press the  
button.  
The air conditioner starts up in the Fan mode.  
You can change modes at any time.  
When the air conditioner is in the Fan mode, the temperature  
cannot be set or displayed.  
To set the fan speed:  
4
5
Press the  
button on the unit one or more times until the  
desired fan speed(F1, F2 or F3) is displayed.  
Low  
Medium  
High  
To control the direction of the air flow, refer to page 20.  
E-10  
Removing Excess Humidity  
If the atmosphere in your room is very humid or damp, you can remove  
excess humidity without lowering the room temperature too much.  
You can operate the Dry mode only by using the control panel.  
1
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in the mode selected when  
the unit was last used.  
The unit beeps.  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
If the dry indicator is not displayed at the top of the control panel, press  
the  
button on the control panel one or more times until it appears.  
Result:  
The unit beeps each time you press the  
The air conditioner runs in the Dry mode.  
button.  
You can change modes at any time.  
3
To adjust the temperature, press the  
or  
buttons one or  
more times until the required temperature is displayed.  
Possible temperatures are between 18°C and 30°C inclusive.  
Result: Each time you press the  
or  
buttons:  
- The temperature is adjusted by 1°C  
- The unit beeps  
The air conditioner starts removing the excess humidity;  
the quantity of air is adjusted automatically.  
4
To control the direction of the air flow, refer to page 20.  
E-11  
Using the  
Wireless  
Remote  
Control  
This chapter indicates how to operate and program  
your air conditioner with the wireless remote control.  
E-12  
Cooling Your Room  
You must select the Cool mode if you wish to adjust the:  
Cooling temperature  
Fan speed when cooling  
1
If necessary, press the  
(On/Off) button.  
Result:  
The air conditioner starts up in the mode selected  
when the unit was last used.  
The unit beeps.  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
If the  
is not displayed at the top of the remote control,  
press the  
appears.  
button on the remote control one or more times until it  
Result:  
The unit beeps each time you press the  
The air conditioner runs in the Cool mode.  
button.  
You can change modes at any time.  
3
To adjust the temperature, press the  
buttons one or more times  
until the required temperature is displayed.  
Possible temperatures are between 18°C and 30°C inclusive.  
Result: Each time you press the buttons:  
- The temperature is adjusted by 1°C  
- The unit beeps  
The air conditioner starts cooling, if the room temperature  
is higher than the selected temperature.  
If the room temperature reaches the set temperature, the air  
conditioner stops cooling, but the fan is still operating.  
4
Select the fan speed by pressing the  
until the required setting is displayed:  
button one or more times  
Low  
Medium  
High  
Result:  
Each time you press the  
button, the unit beeps.  
5
To control the direction of the air flow, refer to page 20.  
E-13  
Ventilating Your Room  
If the air in your room is stale, you can ventilate the room using the Fan feature.  
1
If you wish to discharge stale air, push the ventilation lever on the front of the  
unit to the right and open position ( ).  
Result: The air inside the room circulates and stale air is discharged  
outside.  
Otherwise, push the ventilation lever to the left and closed position (  
).  
Result: The air simply circulates inside the room.  
2
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in the mode selected when  
the unit was last used.  
The unit beeps.  
3
If the  
is not displayed at the top of the remote control,  
press the  
appears.  
button on the remote control one or more times until it  
Result:  
The unit beeps each time you press the  
The air conditioner runs in the Fan mode.  
The temperature is set automatically.  
button.  
You can change modes at any time.  
◆  
4
Select the fan speed by pressing the  
until the required setting is displayed:  
button one or more times  
Low  
Medium  
High  
Result: Each time you press the  
button, the unit beeps.  
5
To control the direction of the air flow, refer to page 20.  
E-14  
Removing Excess Humidity  
If the atmosphere in your room is very humid or damp, you can remove  
excess humidity without lowering the room temperature too much.  
1
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in the mode selected when  
the unit was last used.  
The unit beeps.  
The air conditioner is fitted with a protection mechanism  
to prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
3
4
If the  
is not displayed at the top of the remote control, press the  
button on the remote control one or more times until it appears.  
Result:  
The unit beeps each time you press the  
The air conditioner runs in the Dry mode.  
button.  
You can change modes at any time.  
◆  
To adjust the temperature, press the  
buttons one or more times  
until the required temperature is displayed.  
Possible temperatures are between 18°C and 30°C inclusive.  
Result: Each time you press the buttons:  
- The temperature is adjusted by 1°C  
- The unit beeps  
The air conditioner starts removing the excess humidity;  
the quantity of air is adjusted automatically.  
To control the direction of the air flow, refer to page 20.  
E-15  
Setting the On Timer  
The On Timer enables you to switch on the air conditioner automatically after a  
given time. You can select the On timer only when the air conditioner is off. You  
can select the On timer only when the air conditioner operates in the Cool mode.  
Remote Control  
1
Check that the air conditioner has been switched off; if necessary,  
press the (On/Off) button.  
2
To set the operating time, press the  
button one or more times until  
the required time is displayed. Possible time is between 1 hour and  
24 hours inclusive.  
3
Press the  
(Set/Cancel) button to complete the setting.  
Result: The remaining time is displayed on the remote control and  
the control panel.  
Blinking of the timer indicator on the remote control stops.  
The timer indicator lights up on the control panel.  
The unit beeps  
The air conditioner will switch on automatically in the cool  
mode when the counter displayed on the remote control  
and the control panel reaches the set time.  
Control Panel  
You can select the temperature and Energy saving mode after  
setting the On timer mode.  
To Cancel the On Timer  
1
Press the  
(Set/Cancel) button.  
If you want to turn on the air conditioner before the timer reaches  
the setting time, press the  
(On/Off) button.  
E-16  
Setting the Off Timer  
The Off Timer enables you to switch off the air conditioner automatically after a  
given time. You can select the Off timer only when the air conditioner is on. You  
can select the Off timer only when the air conditioner operates in the Cool mode.  
Remote Control  
1
Check that the air conditioner has been switched on; if necessary,  
press the (On/Off) button.  
2
To set the operating time, press the  
button one or more times until  
the required time is displayed. Possible time is between 1 hour and  
24 hours inclusive.  
3
Press the  
(Set/Cancel) button to complete the setting.  
Result: The remaining time is displayed on the remote control and  
the control panel.  
Blinking of the timer indicator on the remote control stops.  
The timer indicator lights up on the control panel.  
The unit beeps  
The air conditioner will switch off automatically when the  
counter displayed on the remote control and the control panel  
reaches the set time.  
Control Panel  
You can select the fan speed, temperature and Energy saving mode  
after setting the Off timer mode. However, when you change the  
mode, the Off timer mode is canceled.  
To Cancel the Off Timer  
1
Press the  
(Set/Cancel) button.  
If you want to turn off the air conditioner before the timer reaches  
the setting time, press the  
(On/Off) button.  
E-17  
Setting the Sleep Timer  
The Sleep Timer can be used when you are cooling to switch the air  
conditioner off automatically after a period of 8 hours.  
If you wish to switch the unit off at a specific time, refer to  
page 17.  
Remote Control  
1
2
Make sure that you have selected the Cool mode.  
Press the button on the remote control.  
Result: Each time you press a button, the unit beeps.  
The indicator on the remote control is displayed.  
The timer indicator lights up on the control panel.  
The “SLEEP” passes through the control panel for about  
15 seconds and the " " will be displayed.  
The remaining time is displayed and decreased by 1 hour  
automatically to indicate the remaining time.  
The air conditioner will be controlled as indicated in the  
illustrations below.  
Control Panel  
Cooling When the temperature has  
been increased by 1°C  
(after 1 hour), it is maintained  
for 7 hours.  
To Cancel the Sleep Timer  
To cancel the timer, press:  
The  
button on the remote control.  
Result: The unit beeps.  
The  
indicator on the remote control is no longer displayed.  
The “SLEEP” indicator on the control panel is no longer  
displayed.  
The air conditioner operates in the mode selected last.  
If you select the Energy Saving mode in the Sleep Timer mode,  
the Sleep Timer will be cancelled and the air conditioner will start  
up in the Energy Saving mode.  
E-18  
Selecting Energy Saving Mode  
If you wish to save energy when using your air conditioner,  
select the energy saving mode.  
Remote Control  
To select the energy saving mode, press the  
button on the remote  
1
control one or more times until the Energy Saving indicator lights up.  
Result:  
The E-saver indicator lights up on the control panel.  
The fan and compressor cycle on and off together.  
The fan will continue to run for a short time after the  
compressor cycles off.  
If you would like the air conditioner to run in Fan mode, do not press  
the  
button. You cannot use the Fan mode in the Energy Saving  
mode.  
Control Panel  
2
To stop the energy saving mode, press the  
control again.  
button on the remote  
Result: The fan runs at all times, while the compressor cycles on and off.  
If you select the Sleep Timer in the Energy Saving mode, the Energy  
Saving will be cancelled and the air conditioner will start up in the  
Sleep Timer mode.  
E-19  
Adjusting the Air Flow Direction Horizontally  
Depending on the position of the unit in your room, you can adjust  
the orientation of the inner air flow blades on the unit.  
Adjust the air flow blades to the desired position by pushing them side to side.  
Adjusting the Air Flow Direction Vertically  
Again depending on the position of the unit in your room, you can  
adjust the orientation of the outer air flow blades on the right-hand  
side of the unit.  
RECOMMENDATION  
When...  
Adjust the blades to face...  
Cooling  
Upwards.  
1
Adjust the air flow blades to the desired position, by pushing them  
upwards or downwards.  
If you orient the air flow blades downwards and the unit  
operates in Cool mode for long periods of time, dew may:  
Form on the surface of the blades  
Drip from the blades  
E-20  
Temperature and Humidity Ranges  
The following table indicates the temperature and humidity ranges  
within which the air conditioner can be used.  
Mode  
Indoor Temperature  
Outdoor Temperature  
Indoor Humidity  
Cooling  
21°C to 32°C approx.  
21°C to 43°C approx.  
80% or less  
If the air conditioner is used at...  
Then...  
Higher temperature  
The automatic protection feature may be triggered and the air  
conditioner stopped.  
Lower temperature  
A water leakage or some other malfunction may happen if the  
heat exchanger freezes.  
Higher humidity levels  
Water may condense on and drip from the surface of the unit  
if it is used for long periods.  
E-21  
Cleaning Your Air Conditioner  
Be sure to clean the air filter periodically to maintain the air conditioner  
in the best condition for a long period of time.  
When cleaning the air conditioner, turn it off and pull out the  
power plug.  
1
Open the front grille by pulling the tabs on both sides of the grille.  
Then lift it up slightly to open the front grille completely.  
2
3
Grab the tabs on the filter and pull it up and out.  
Remove all dust on the air filter with a vacuum cleaner or brush.  
4
5
When you have finished, insert the air filter back into its original position.  
Wipe the surface of the unit with a neutral detergent  
and then wipe it again with dry cloth.  
(Be sure not to use benzene, solvent or other chemical products.)  
If you...  
Then...  
Set the fan going for a few hours to  
dry the inside of the air conditioner  
thoroughly.  
Will not be using the  
air conditioner for a  
long period of time  
Switch the air conditioner off and  
unplug it from the wall socket.  
Clean the filter and outer surfaces.  
Set the fan going for a few hours to  
dry the inside of the air conditioner  
thoroughly.  
Have not used the air  
conditioner for a long  
period of time  
E-22  
Solving Common Problems  
Before contacting an authorized service center, perform the following simple checks.  
They may save you the time and expense of an unnecessary call.  
Problem  
Explanation / Solution  
Check that the circuit breaker used for the air conditioner has not been  
triggered.  
Check that the power cable is plugged into a wall socket and the socket is  
switched on, if necessary.  
The air conditioner does  
not operate at all  
Check that the temperature indicator on the unit is lit; if necessary,  
press the  
(On/Off) button on the remote control or unit.  
Check that there are no obstacles between you and the unit.  
Replace the remote control batteries if necessary.  
Check that you are close enough to the unit (seven metres/yards or less).  
The air conditioner does not  
operate with the remote  
control  
Check that you are pointing the remote control at the remote control sensor  
on the unit.  
No beep is heard when you  
press the  
(On/Off) button  
on the remote control  
Replace the remote control batteries if necessary.  
Check that the correct operating mode has been selected(Cool).  
The room temperature may be too low.  
The air conditioner does not  
cool  
Dust may be blocking the air filter; refer to page 22 for cleaning instructions.  
Check that there is no obstacle blocking the air flow into or out of the unit.  
Check that the timer has been programmed correctly;  
The timer is not correctly  
triggered  
refer to page 16~18.  
Odors are permeating the  
room during air conditioning  
◆◆ Ventilate the room.  
Technical Specifications  
Design and specifications are subject to change without notice.  
Model  
Power Supply  
AW0691L  
AW0891L  
AW1091L  
AW1291L  
115V~, 60Hz  
230-208V~, 60Hz  
AW1891L  
E-23  
YOUR SAMSUNG ROOM AIR CONDITIONER  
WARRANTY  
Limited Warranty to Original Purchaser  
Samsung will repair or replace, at our option, this product if found defective within the warranty  
period beginning from the original date of purchase. This Samsung Product is warranted by  
SAMSUNG ELECTRONICS CANADA Inc. against manufacturing defects in materials or  
workmanship for the period specified.  
Labor  
Parts  
1 Year (In home)  
1 Year  
Limited 5-Years Compressor Warranty  
Within one year of purchase Samsung Electronics Canada Inc. will provide a replacement  
compressor if it is found to be defective in material or workmanship. During the existing four  
years (second through fifth year) Samsung Electronics Canada Inc. will provide a replacement  
only, without charge, if it is found to be defective in material or workmanship. Labor to install  
the compressor during these existing four years is not included in the warranty. All warranty  
repairs must be performed by a Samsung Authorized Service Centre.  
Obligation of the Original Owner  
The original dated purchase receipt must be retained as proof of purchase and presented to  
the Authorized Service Centre before warranty services are rendered.  
Exclusions of the Warranty  
This warranty does not cover damage due to accident, fire, flood and/or other Acts of God:  
misuse, incorrect line voltage, improper installation, improper or unauthorized repairs,  
commercial use, or damages which occur in shipping. Exterior and interior finish and plastic  
parts, are not covered under this warranty, Customer adjustments which are explained in the  
instruction manual are not covered under the terms of this warranty. This warranty will  
automatically be voided for any unit found with a missing or altered serial number.  
This warranty is valid only on products purchased and used in Canada.  
SAMSUNG ELECTRONICS CANADA INC.  
7037 Financial Drive, Mississauga, Ontario L5N 6R3  
ELECTRONICS  
Printed in Korea  

York Air Conditioner D1na018 User Manual
Toshiba Ctx28 User Manual
Samsung E800 User Manual
Samsung Aw1001m User Manual
Newair Ac12000h User Manual
Lifebreath 200erv User Manual
JVC AV 32X35HUE User Manual
CYBERPOWER PDU31006 User Manual
ASUS VE228H User Manual
ACER CHROMEBOOK 314 C933 User Manual