Magellan® 1000i
Omni-Directional Imaging Scanner
ꢀ Quick Reference Guide
Guida Rapida ꢀ Guide de Référence Rapide
ꢀ
Guía de Referencia Rápida
Schnellanleitung ꢀ Referência Rápida
English .......................................................... 1
Francais ......................................................... 5
Deutsch ......................................................... 9
Italiano ......................................................... 13
Español ....................................................... 17
Portugues .................................................... 21
Chinese ....................................................... 25
Japanese ..................................................... 29
Quick Reference Guide
i
PSC INC. MAGELLAN® END USER LICENSE
AGREEMENT
Notice to End User: The PSC Product you have acquired contains embedded Software,
which is integral to the product’s operation. This Software is being provided to you
under license, subject to the terms and conditions of this Agreement. If you use the PSC
Product, you will be deemed to have accepted the terms and conditions of this Agree-
ment. If you do not intend to be bound to the terms of this Agreement, PSC is not willing
to license the Software to you, you may not use the PSC Product or the Software, and
you must contact the party from whom you acquired the PSC Product for instructions.
This End User Software License Agreement (“Agreement”) is a legally binding agreement gov-
erning the licensing of the Software and Documentation by PSC Inc. and its wholly owned sub-
sidiaries and affiliates (“PSC”) to the entity or person who has purchased or otherwise acquired
a PSC Product (“End User”). For purposes of this Agreement, any software that is associated
with a separate end-user license agreement is licensed to you under the terms of that license
agreement. PSC and End User hereby agree as follows:
1. Definitions.
1.1
"Documentation" means materials such as user’s guides, program reference guides,
quick reference guides, manuals, or similar materials associated with or related to the
PSC Product, whether in printed, “online”, or other form.
1.2
"Proprietary Information" means: (a) source code, object code, software, documentation,
and any related internal design, system design, data base design, algorithms, technol-
ogy, technical data or information, implementation techniques, and trade secrets related
to the Software, (b) any other trade secrets marked appropriately or identified as propri-
etary or confidential, and (c) any information that End User, under the circumstances,
should recognize as confidential. Proprietary Information does not include any informa-
tion that the receiving party can establish was (1) in the public domain, (2) already in the
receiving party’s possession or rightfully known prior to receipt, (3) rightfully learned from
a third party not in violation of any other's proprietary rights, or (4) independently devel-
oped without access to Proprietary Information.
®
®
1.3
1.4
“PSC Product” means the PSC Magellan 9500 series, Magellan 8500 series, Magel-
®
®
®
lan 8200 series, Magellan 8100 series, and/or Magellan SL series scanner and/or
scanner/scale product, including all embedded Software in and all Documentation
related to such product, which has been purchased or otherwise acquired by End User,
whether obtained directly or indirectly from PSC.
"Software" means any software or computer programs of PSC or its third party licensors
in machine readable form which is embedded in the PSC Product, whether obtained
directly or indirectly from PSC, including any replacement, update, upgrade, enhance-
ment or modification.
2. Scope Of License Granted.
2.1
PSC grants to End User a non-exclusive, non-transferable, perpetual license to use the
Software, solely on the PSC Product in which it is embedded (“designated PSC Prod-
uct”), in machine-readable form only, solely for End User's internal business purposes.
This Agreement does not convey ownership of the Software to End User. Title to the
Software shall be and remain with PSC or the third party from whom PSC has obtained a
licensed right. As used in this Agreement, the term “purchase” or its equivalents when
applied to the Software shall mean “acquire under license.” End User is not entitled to
receipt or use of the source code to any Software.
2.2
End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise
reproduce or remanufacture the Software, whether modified or unmodified, nor sell,
assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any
other person or organization, for purposes other than as expressly provided in this
Agreement, without PSC’s prior written consent.
3. Transfers, Support.
3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic
transfer, or other use of the Software on other than the designated PSC Product will be a
Quick Reference Guide
i
material breach of this Agreement. However, PSC may elect not to terminate this Agree-
ment or the granted licenses, but instead may elect to notify End User that End User is
deemed to have ordered and accepted a license for each breaching use. End User shall
pay PSC the applicable list price for such licenses as of the date of such breach.
3.2
3.3
End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise trans-
fer the PSC Product to any third party unless such third party agrees with PSC in writing
to be bound by the terms and conditions of this Agreement. Any such transfer of the
PSC Product absent such agreement shall be null and void.
End User may obtain support for Software from PSC at PSC’s standard support fees and
under PSC’s standard support terms and conditions in effect at the time the support is
requested.
4. Intellectual Property.
End User acknowledges that the Software constitutes valuable trade secrets of PSC or PSC’s
third party licensors and that the Software is protected by intellectual property laws and treaties.
The license set forth in this Agreement does not transfer to End User any ownership of PSC’s or
its third party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other
intellectual property rights and End User shall have no right to commence any legal actions to
obtain such rights. End User shall not remove, modify, or take any other action that would
obscure any copyright, trademark, patent marking, or other intellectual property notices con-
tained in or on the PSC Product.
5. Proprietary Information.
5.1
End User acknowledges that Proprietary Information is the confidential, proprietary, and
trade secret property of PSC and PSC’s third party licensors and End User acquires no
right or interest in any Proprietary Information.
5.2
End User shall not disclose, provide, or otherwise make available the Proprietary Infor-
mation of PSC or its third party licensors to any person other than End User’s authorized
employees or agents who are under confidentiality agreement, and End User shall not
use the Proprietary Information other than in conjunction with use of the PSC Product
exclusively for End User’s internal business purposes. End User shall take steps to pro-
tect the Proprietary Information no less securely than if it were End User's own intellec-
tual property.
5.3
The provisions of this Proprietary Information Section shall survive and continue for five
(5) years after the termination of this Agreement.
6. Limited Warranty.
6.1 PSC warrants that, under normal use and operation, the PSC Product will conform sub-
stantially to the applicable Documentation for the period specified in the Documentation.
During this period, for all reproducible nonconformities for which PSC has been given
written notice, PSC will use commercially reasonable efforts to remedy nonconformities
verified by PSC. End User agrees to supply PSC with all reasonably requested informa-
tion and assistance necessary to help PSC in remedying such nonconformities. For all
defects reported to PSC within the warranty period, PSC’s liability is limited to providing
End User with one copy of corrections or responding to End User's problem reports
according to PSC's standard assistance practices. PSC does not warrant that the prod-
uct will meet End User's requirements or that use of the product will be uninterrupted or
error free, or that PSC's remedial efforts will correct any nonconformance. This limited
warranty does not cover any product that have been subjected to damage or abuse,
whether intentionally, accidentally, or by neglect, or to unauthorized repair or unautho-
rized installation, and shall be void if End User modifies the product, uses the product in
any manner other than as established in the Documentation, or if End User breaches any
of the provisions of this Agreement.
6.2
EXCEPT AS PROVIDED IN THIS AGREEMENT, THE PSC PRODUCT IS PROVIDED
“AS IS” AND PSC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED,
WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DIS-
CLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
7. Infringement.
7.1
PSC will defend End User against any claim in a lawsuit that the PSC Product furnished
hereunder infringe a United States patent or copyright of a third party and PSC will pay
any damages finally awarded against End User by a court of competent jurisdiction that
®
ii
Magellan 1000i
are attributable to such claim or will pay End User’s part of any settlement that is attribut-
able to such claim, provided, that 1) End User notifies PSC promptly in writing of the
claim, 2) PSC controls the defense or settlement of the claim, and 3) End User cooper-
ates fully with PSC in such defense or settlement. All notices of a claim should be sent to
PSC Inc., Legal Department, 111 SW Fifth Ave. Suite 4100, Portland, OR 97204-3644.
7.2
7.3
7.4
In the defense or settlement of any such claim, PSC may, at its option, 1) procure for End
User the right to continue using the PSC Product, 2) modify the PSC Product so that it
becomes non-infringing, 3) replace the PSC Product with an equivalent product not sub-
ject to such claim, or 4) provide End User an opportunity to return the PSC Product and
receive a refund of the purchase price paid, less a reasonable allowance for use.
PSC shall have no liability to End User for claims of infringement based upon 1) the use
of any PSC Product in combination with any product which PSC has not either furnished
or authorized for use with such PSC Product 2) the use of any PSC Product designed,
manufactured, or modified to the specifications of End User, or 3) End User’s modifica-
tion of the PSC Product without written authorization from PSC.
THE FOREGOING STATES PSC’S COMPLETE AND ENTIRE OBLIGATION CON-
CERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROP-
ERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREEMENTS,
WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING SUCH
CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPO-
RANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES,
WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE WRITING
SIGNED BY BOTH PARTIES.
8. Limitation Of Liability.
EXCEPT AS PROVIDED IN SECTION 7, PSC SHALL NOT BE LIABLE FOR ANY CLAIMS
AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL PSC'S LIABILITY FOR
DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLI-
GENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS,
EXCEED THE PRICE OR FEE PAID BY END USER FOR THE PSC PRODUCT. UNDER NO
CIRCUMSTANCES SHALL PSC BE LIABLE TO END USER OR ANY THIRD PARTY FOR
LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY
OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE,
EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF PSC HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
9. Government Restricted Rights; International Use.
9.1
Use, duplication, or disclosure of the Software by the U.S. Government is subject to the
restrictions for computer software developed at private expense as set forth in the U.S.
Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in
Technical Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), which-
ever is applicable.
9.2
If End User is using the PSC Product outside of the United States, End User must com-
ply with the applicable local laws of the country in which the PSC Product is used, with
U.S. export control laws, and with the English language version of this Agreement. The
provisions of the “United Nations Convention on International Sale of Goods” shall not
apply to this Agreement.
10. Termination.
10.1 Either party may terminate this Agreement or any license granted under this Agreement
at any time upon written notice if the other party breaches any provision of this Agree-
ment.
10.2 Upon termination of this Agreement, End User immediately shall cease using any non-
embedded software and shall return to PSC or destroy all non-embedded software cov-
ered by this Agreement, and shall furnish PSC with a certificate of compliance with this
provision signed by an officer or authorized representative of End User. For embedded
software, End User agrees to sign a waiver prepared by PSC concerning further use of
the embedded Software. End User’s resumed or continued use of the embedded Soft-
ware after termination shall constitute End User’s agreement to be bound by the terms
and conditions of this Agreement for such use.
11. General Provisions.
11.1 Entire Agreement; Amendment. This document contains the entire agreement between
Quick Reference Guide
iii
the parties relating to the licensing of the Software and supersedes all prior or contempo-
raneous agreements, written or oral, between the parties concerning the licensing of the
Software. This Agreement may not be changed, amended, or modified except by written
document signed by PSC.
11.2 Notice. All notices required or authorized under this Agreement shall be given in writing,
and shall be effective when received, with evidence of receipt. Notices to PSC shall be
sent to the attention of Contract Administration, PSC Scanning Inc., 959 Terry Street,
Eugene, OR 97402, or such other address as may be specified by PSC in writing.
11.3 Waiver. A party’s failure to enforce any of the terms and conditions of this Agreement
shall not prevent the party’s later enforcement of such terms and conditions.
11.4 Governing Law; Venue:This Agreement and the rights of the parties hereunder shall be
governed by and construed in accordance with the laws of the State of Oregon U.S.A,
without regard to the rules governing conflicts of law. The state or federal courts of the
State of Oregon located in either Multnomah or Lane counties shall have exclusive juris-
diction over all matters regarding this Agreement, except that PSC shall have the right, at
its absolute discretion, to initiate proceedings in the courts of any other state, country, or
territory in which End User resides, or in which any of End User's assets are located.
11.5 Attorneys’ Fees. In the event an action is brought to enforce the terms and conditions of
this Agreement, the prevailing party shall be entitled to reasonable attorneys’ fees, both
at trial and on appeal.
- END -
®
iv
Magellan 1000i
Quick Reference
This guide is provided to help get your installation up-and-run-
ning quickly and efficiently. For more details, including program-
ming information, reference the Product Reference Guide (PRG),
which is available for viewing and download from the PSC web-
site listed on the back cover of this manual.
Installation
Route the interface cable from the terminal or host. Plug the AC
adapter (if one is used) into a wall outlet and the interface (I/F)
cable, then route and attach the I/F cable to the scanner. Verify
operation by presenting known-good bar codes to the scanner.
The unit should beep1 and/or flash its good read LED and send
the bar code data to the host or terminal. If not, refer to the Trou-
bleshooting section of this guide.
Scanner installation is complete.
For 220-230 VAC
I/F Cable
To Host/Terminal
adapters, the
cord must be
facing down as
shown in the
illustration. If
Connect
Here
installed upwards,
it will pose an
undue strain on the
socket outlet.
A/C Adapter
(if needed)
1. Beeper and LED behavior is selectable and may have been disabled
by a previous user.
Quick Reference Guide
1
Optional Stand
An optional stand is available for the scanner which can be
permanently attached to a wall or countertop. After locating the
stand in an optimal position, the scanner (along with the stand)
can be detached for portable use by lifting the entire unit as
shown below.
Power Supply
Some models require1 either a Listed Class 2 or Listed LPS power
source which supplies power directly to the unit.
How to Scan
Bar codes can be presented to the scanner while it is resting on
the counter or in the optional stand, or the scanner/mount can be
lifted and held as shown.
Switch Option Shown
*Optional Stand
1. Power Off the Terminal (POT) units do not require a power supply.
®
2
Magellan 1000i
Targeted Scanning Mode
In order to read a bar code (switch option only)...
•
press and hold the switch. An aiming pattern will
appear.
•
with the aiming pattern fairly centered over the bar code
to be read, release the switch to read the label.
The scanner will not read bar codes while the
switch is pressed.
Targeted Scanning Mode will read bar codes
in any orientation.
The scanner will return to full pattern Omni
NOTE
Mode after a configurable time has elapsed.
Troubleshooting
If the scanner is not operating properly, the following checks
should be performed:
1. If the scanner uses an external power supply and the external
power supply has failed, the scanner will not operate.
Exchange the power supply with a known good power sup-
ply and retest operation.
4
1
2
5
3
2. Verify the interface cable is securely attached to the host.
Consult your technical support personnel or refer to your
host system manual to verify the proper connection for the
scanner.
Quick Reference Guide
3
3. Verify that the interface cable is securely attached to the scan-
ner.
4. Check that the bar codes are of sufficient quality to be recog-
nized by the scanner. Wrinkled, smudged, or torn labels can
cause the scanner to not read at all. Scan known-good labels
of an active symbology1 to check the scanner's read opera-
tion.
5. Ensure that the scanner's interface type is compatible with
the host terminal by consulting your POS system manual
and/or the Product Reference Guide.
If the scanner still does not function properly, contact your local
supplier or PSC Customer Support Services.
Compliance Statement
This device complies with Part 15 rules. Operation is subject to
the following conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received, including
interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES -003.
Cet appareil numérique de la classe A est confrome à la norme NMB-003 du
Canada.
LED Class
CLASS 1 LED PRODUCT
APPARECCHIO LED CLASSE 1
APPAREIL A LED DE CLASSE 1
EN60825-1
LED KLASSE 1
1. Reading of the various bar code symbologies can be independently
enabled or disabled in the scanner.
®
4
Magellan 1000i
Guide de Référence Rapide
Ce guide est fourni afin de vous aider à installer rapidement et efficace-
ment votre lecteur de codes à barres. Pour plus de détails concernant les
informations sur la programmation, consultez le Guide de Référence du
Produit qui est disponible soit pour lecture soit pour téléchargement à
partir du site Internet PSC indiqué au dos de ce manuel.
Installation
Acheminez le câble d'interface à partir du terminal ou de l'ordinateur
hôte. Branchez l'adaptateur CA (courant alternatif) (s'il est nécessaire
d'en utiliser un) à une prise du mur et le câble d'interface (I/F), ensuite
acheminez et connectez le câble I/F au scanner. Vérifiez l'opération en
présentant au scanner des codes à barres corrects. l'unité devrait émettre
1
un bip sonore et/ou faire clignoter la diode pour confirmer que la saisie
est correcte et envoyez les données du codes à barres à un ordinateur hôte
ou au terminal. Si ce n'est pas le cas, consultez la section Diagnostic de
Pannes de ce guide.
L'installation du scanner est terminée.
Pour les
A l'ordinateur
hôte/Terminal
Câble d'Interface
adaptateurs 220-
230 VCA, le cordon
doit être face vers le
bas comme montré
sur l'illustration. S'il
est installé vers la
haut, ceci provoque
une tension
Adaptateur CA
(si nécessaire)
Connectez
ici
excessive au niveau
de la prise.
1. Le bip sonore et le clignotement de la diode LED peuvent être sélec-
tionnés et peuvent avoir été désactivés par un utilisateur précédent.
Guide de Référence Rapide
5
Support Facultatif
Un support facultatif est disponible pour le scanner qui peut être fixé en
permanence à un mur ou à un comptoir. Après avoir placé le support
dans une position optimale, le scanner (ainsi que le support) peuvent
être détachés pour un usage portatif en levant l'unité complète comme
illustré ci-dessous.
Alimentation Électrique
1
Certains modèles exigent une source d'alimentation avec courant de
sortie de Classe 2 ou à puissance limitée (LPS) qui fournit l'électricité
directement à l'unité.
Comment Scanner
La lecture peut être en mode mains libres pour les pièces faciles à
manipuler ou à la main pour les pièces plus encombrantes.
Bouton pour mode ciblée
*Support Facultatif
1. Les unités de mise hors tension du terminal n'exigent aucune alimen-
tation électrique.
®
6
Magellan 1000i
Mode Saisie Ciblée
Afin de saisir un code-barre (option commutation uniquement)...
•
•
appuyez et maintenez la pression sur le bouton de commuta-
tion. Un rayon de visée apparaîtra.
centrez bien le rayon de visée au-dessus du codes à barres qui
doit être saisi, puis relâchez le bouton pour lire l'étiquette.
Le scanner ne lira pas les codes à barres tant
que le bouton sera enfoncé. Le Mode de
Saisie Ciblée lira les codes à barres dans
n'importe quel sens. Le scanner retournera
complètement en mode Omni après qu'un
certain temps configurable se sera écoulé.
NOTE
Diagnostic de Pannes
Si le lecteur ne fonctionne pas correctement, effectuez les vérifications
suivantes :
1. Si le lecteur utilise une alimentation électrique extérieure et que
l'alimentation extérieure ne fonctionne pas, le lecteur ne fonction-
nera pas. Echangez la source d'alimentation avec une autre alimen-
tation électrique correcte et effectuez de nouveau l'opération pour
vérification.
4
1
2
5
3
2. Vérifiez que le câble d'interface est correctement connecté à l'ordi-
nateur hôte/terminal. Consultez votre service technique ou référez-
vous au manuel de votre ordinateur hôte afin de vérifier si la con-
nexion au lecteur est correcte.
Guide de Référence Rapide
7
3. Vérifiez que le câble d'interface est connecté correctement au lect-
eur.
4. Contrôlez que la qualité des codes à barres est suffisante pour que
ceux-ci soient reconnus par le scanner. Les étiquettes pliées, sales ou
déchirées peuvent empêcher le scanner de lire les codes. Saisissez
1
des étiquettes correctes avec une symbologie active afin de vérifier
que le scanner effectue l'opération de saisie correctement.
5. Assurez-vous que le type d'interface du scanner est compatible avec
le terminal hôte en consultant la manuel de votre système POS et/
ou le Guide de Référence du Produit.
Si le lecteur ne fonctionne toujours pas correctement, contactez votre
fournisseur local ou le Service d'Assistance Clientèle de PSC.
Déclaration de Conformité
Cet appareil est conforme aux Règles (PART 15 Rules) en matière
d'émissions et d'interférences des services de la FCC. Son fonctionne-
ment est soumis aux conditions suivantes :
1. Cet appareil ne doit pas provoquer d'interférences nuisibles; et
2. Cet appareil doit accepter toute interférence reçue, y compris les
interférences qui peuvent provoquer des opérations non désirées.
This Class A digital apparatus complies with Canadian ICES -003.
Cet appareil numérique de la classe A est confrome à la norme NMB-003 du
Canada.
LED Class
CLASS 1 LED PRODUCT
APPARECCHIO LED CLASSE 1
APPAREIL A LED DE CLASSE 1
EN60825-1
LED KLASSE 1
PRODUIT LED CLASSE 1
1. La lecture des différentes symbologies et de codes à barres peuvent
être activées ou désactivées de façon indépendante.
®
8
Magellan 1000i
Schnellanleitung
Diese Anleitung soll eine schnelle und effiziente Installation und
Inbetriebnahme ermöglichen. Weitere Einzelheiten, u.a. zur Program-
mierung, entnehmen Sie dem Produktleitfaden (Product Reference
Guide, PRG), der zum Anzeigen und Herunterladen auf der PSC-Web-
seite verfügbar ist (siehe Rückseite dieses Leitfadens).
Installation
Verlegen Sie das Interfacekabel vom Haupt- oder Endgerät. Schließen Sie
den Netzadapter (sofern verwendet) an einer Netzsteckdose und am
Interfacekabel (IF-Kabel) an, und verlegen Sie das IF-Kabel zum Scanner
und schließen es daran an. Führen Sie einen Funktionstest aus, indem
Sie mit dem Scanner garantiert funktionsfähige Barcodes einlesen. Das
1
Gerät muss einen Piepton aussenden und/oder mit der gut sichtbaren
LED blinken und die Barcodedaten an das End- oder Hauptgerät
senden. Andernfalls ziehen Sie den Abschnitt zu Fehlerbehebung in
diesem Leitfaden zurate.
Die Scannerinstallation ist abgeschlossen.
Zum
End-/Hauptgerät
Bei 220-230 V-
Adaptern, muss
das Kabel wie in
der Abbildung
Interfacekabel
nach unten zeigen.
Wenn es nach
oben zeigt, wird
die Steckdose
Netzadapter
(falls erforderlich)
Hier
anschließen
unnötig belastet.
1. Piepton- und LED-Verhalten können eingestellt werden und sind durch
Vornutzer ggf. deaktiviert.
Schnellanleitung
9
Optionaler Ständer
Zu dem Scanner gibt es einen optionalen Sockel zur dauerhaften
Befestigung an einer Wand oder Ladentheke. Nachdem Sie den
Sockel optimal positioniert haben, können Sie den Scanner (mit
Sockel) für freihändigen Einsatz abnehmen, indem Sie das
gesamte Gerät wie unten dargestellt anheben.
Stromversorgung
Für einige Modelle ist eine Stromversorgung mit Klasse 2- oder LPS-
1
Zulassung für direkte Stromversorgung erforderlich .
Scanverfahren
Barcodes werden mit dem Scanner eingescannt, während dieser auf der
Ladentheke steht oder am optionalen Sockel befestigt ist, oder indem der
Scanner/die Halterung hochgehoben und wie folgt gehalten wird.
Optionaler Schalter
*Optionaler Sockel
1. Für Geräte mit POT-Option (Power Off the Terminal) ist keine Strom-
versorgung erforderlich.
®
10
Magellan 1000i
Zielscanmodus
So lesen Sie einen Barcode ein (nur optionaler Schalter):
•
•
Schalter gedrückt halten Ein Zielmuster wird angezeigt.
Zielmuster entsprechend über dem einzulesenden Barcode
ausrichten und Schalter zum Scannen des Etiketts loslassen.
Bei gedrücktem Schalter werden die Bar-
codes vom Scanner nicht eingelesen.
Mit dem Zielscanmodus werden Barcodes in
jeder Ausrichtung eingelesen.
HINWEIS
Der Scanner wechselt nach Ablauf einer kon-
figurierbaren Zeit wieder in den omnidirek-
tionalen Vollmustermodus.
Fehlerbehebung
Bei fehlerhaftem Scannerbetrieb prüfen Sie Folgendes:
1. Wenn der Scanner mit einer externen Stromversorgung betrieben
wird, funktioniert er nicht, wenn diese ausfällt. Stromversorgung
durch ein garantiert funktionsfähiges Gerät ersetzen und Betrieb
testen.
4
1
2
5
3
2. Sicherstellen, dass das Interfacekabel am Endgerät richtig ange-
schlossen ist. Wenden Sie sich an Ihr zuständiges Technikpersonal
oder ziehen Sie das Endgeräthandbuch zurate, um einen ordnungs-
gemäßen Anschluss des Scanners sicherzustellen.
Schnellanleitung
11
3. Sicherstellen, dass das Interfacekabel am Scanner richtig angeschlos-
sen ist.
4. Sicherstellen, dass die Barcodes ausreichende Qualität aufweisen,
um vom Scanner erkannt zu werden. Zerknitterte, beschmierte,
oder angerissene Etiketten machen ein Einlesen unmöglich. Scan-
1
nen Sie garantiert gute Etiketten mit aktiver Symbologie , um die
Einlesefunktion des Scanners zu überprüfen.
5. Vergewissern Sie sich, dass der Schnittstellentyp des Scanners mit
dem Endgerät kompatibel ist, indem Sie das Handbuch des POS-
Systems und/oder den Produktleitfaden (Product Reference Guide)
zurate ziehen.
Wenn der Scanner weiterhin nicht ordnungsgemäß funktioniert, wenden
Sie sich an Ihren örtlichen Händler oder an den PSC-Kundensupport.
Erfüllung von Vorschriften
Dieses Gerät erfüllt Teil 15 der FCC-Bestimmungen. Der Betrieb unter-
liegt den folgenden Bedingungen:
1. Dieses Gerät darf keine schädlichen Störungen produzieren, und:
2. Dieses Gerät muss für den Empfang von Störungen, darunter
Störungen, die unerwünschtes Betriebsverhalten auslösen, ausgelegt
sein.
Dieses Digitalgerät der Klasse A entspricht dem kanadischen Standard ICES
-003.
LED-Klasse
CLASS 1 LED PRODUCT
APPARECCHIO LED CLASSE 1
APPAREIL A LED DE CLASSE 1
EN60825-1
LED KLASSE 1
KLASSE 1 LED-PRODUKT
1. Das Einlesen der verschiedenen Barcodesymbologien kann im Scan-
ner unabhängig aktiviert bzw. deaktiviert werden.
®
12
Magellan 1000i
Guida Rapida
La presente guida vi aiuterà ad eseguire un'installazione rapida ed effi-
cace. Per ulteriori dettagli, inclusi i dettagli relativi alla programmazione,
consultare la Guida di Riferimento del Prodotto, che può essere consul-
tata online e scaricata dal sito di PSC indicato sul retro del presente man-
uale.
Installazione
Svolgere il cavo d'interfaccia dal terminale o host. Inserire l'eventuale
adattatore CA nella presa a parete e nel cavo d'interfaccia (I/F), quindi
collegare il cavo I/F allo scanner. Verificare il funzionamento facendo leg-
gere allo scanner dei codici a barre dei quali si conosce il contenuto e in
1
buono stato. L'unità emettera un suono e/o farà lampeggiare il LED che
segnala la corretta lettura del codice e invierà i dati del codice all'host o al
terminale. In caso contrario, consultare la sezione "Risoluzione dei prob-
lemi" della presente guida.
L'installazione dello scanner è completa.
Il cavo degli
Cavo d'interfaccia
adattatori 220-230
VCA deve essere
posizionato verso il
basso come
All'host/terminale
indicato
nell'illustrazione. In
caso contrario
l'uscita della presa
di corrente sarà
sotto sforzo.
Adattatore C
(se necessario)
Collegare
qui
1. È possibile selezionare suono oppure LED. Tenere conto della config-
urazione impostata dall'utente che ha utilizzato lo scanner in prece-
denza.
Guida Rapida
13
Supporto Opzionale
È disponibile un supporto opzionale che può essere attaccato
permanentemente alla parete o sul bancone. Dopo aver
posizionato il supporto in posizione ottimale, lo scanner e il
supporto potranno essere staccati per l'utilizzo mobile sollevando
l'intera unità come illustrato in basso.
Alimentazione
1
Alcuni modelli necessitano una sorgente di alimentazione Classe 2 o
LPS che alimenti direttamente l'unità.
Come utilizzare lo Scanner
È possibile presentare i codici al lettore, mentre è posizionato sul ban-
cone oppure inserito nel supporto opzionale, oppure lo scanner può
essere sollevato come da illustrazione.
Pulsante opzione
*Supporto opzionale
1. Le unità alimentate dal terminale (POT - Power Off the Terminal) non
richiedono alimentazione di rete.
®
14
Magellan 1000i
Modalità di Scansione a Bersaglio
Per utilizzare lo scanner con il pulsante opzione:
•
•
tenere premuto il pulsante. Apparirà un mirino luminoso.
Posizionare il mirino luminoso al centro del codice a barre da
leggere e rilasciare il pulsante opzione per eseguire la lettura.
Lo scanner non legge i codici, se il pulsante è
premuto.
La modalità di scansione bersaglio consente
di leggere codici orientati in qualunque verso.
Lo scanner ritornerà in modalità Omni dopo
NOTE
un periodo di tempo impostabile.
Risoluzione dei Problemi
Nel caso lo scanner non funzionasse correttamente, eseguire i seguenti
controlli:
1. Se lo scanner utilizza un'alimentazione esterna e quest'ultima non
fosse operativa, lo scanner non funzionerà. Utilizzare una sorgente
di alimentazione affidabile e riprovare.
4
1
2
5
3
2. Verificare che il cavo d'interfaccia sia saldamente collegato all'host.
Consultare il proprio personale tecnico oppure il manuale del
sistema host per controllare il corretto collegamento dello scanner.
Guida Rapida
15
3. Verificare che il cavo d'interfaccia sia saldamente collegato allo scan-
ner.
4. Controllare che i codici a barre siano di qualità sufficientemente
leggibile per lo scanner. Etichette piegate, strappate o sbavate
potrebbero non essere leggibili. Utilizzare etichette sicuramente leg-
1
gibili che appartenengono ad un sistema di simbologia utilizzato
per controllare il funziomento dello scanner in lettura.
5. Assicurarsi che il tipo di interfaccia dello scanner sia compatibile
con il teminale/host consultando il manuale del POS e/o la Guida
di riferimento del prodotto.
Se lo scanner non funziona correttamente, contattare il rivenditore locale
oppure il Servizio Assistenza Clienti di PSC.
Dichiarazione di Conformità
Il presente dispositivo è conforme ai regolamenti Part 15. Il funziona-
mento è soggetto alle seguenti condizioni:
1. il dispositivo non deve causare interferenze dannose; e
2. il dispositivo deve accettare qualsiasi interferenza ricevuta, incluso le
interferenze che potrebbero causare un funzionamento non desider-
ato.
Il presente apparto digtale di Classe A è conforme alla normativa canadese
ICES-003.
Classe LED
CLASS 1 LED PRODUCT
APPARECCHIO LED CLASSE 1
APPAREIL A LED DE CLASSE 1
LED KLASSE 1
PRODOTTO LED CLASSE 1 EN60825-1
1. La lettura delle varie simbologie dei codici a barre può essere indipen-
dentemente abilitata o disabilitata nello scanner.
®
16
Magellan 1000i
Guía de Referencia Rápida
La finalidad de esta guía es ayudarle a instalar el equipo de forma rápida y
eficiente. Para obtener más datos, incluida información de programación,
consulte la Guía de referencia del producto (PRG) que podrá ver y des-
cargar de la página Web de PSC, cuya dirección aparece en la contracubi-
erta de este manual.
Instalación
Encamine el cable de interfaz desde el terminal o el equipo central.
Conecte el adaptador de CA (si se utiliza uno) a una toma de corriente de
pared y al cable de interfaz (I/F). A continuación encamine y conecte el
cable I/F al escáner. Para comprobar el funcionamiento, coloque un
código de barras en buen estado ante el escáner. La unidad emitirá un
1
pitido y/o parpadeará el LED de lectura correcta y enviará los datos del
código de barras al equipo central o al terminal. Si no es así, consulte la
sección Solución de averías de esta guía.
La instalación del escáner ha finalizado.
Si se utilizan
adaptadores de
220-230 V CA, el
cable debe
Al equipo
central/terminal
Cable de interfaz
orientarse hacia
abajo, como
muestra la imagen.
Si se instala hacia
arriba, ejercerá una
tensión indebida
sobre la toma de
corriente.
Adaptador
de CA (si es
necesario)
Conectar
aquí
1. El funcionamiento del indicador acústico y el LED es seleccionable y
es posible que un usuario anterior lo haya desactivado.
Guía de referencia rápida
17
Soporte Opcional
Existe un soporte opcional para el escáner que puede acoplarse de
forma permanente a una pared o a un mostrador. Después de
colocar el soporte en la posición óptima, se podrá desmontar el
escáner (junto con el soporte) si desea trasladarlo de lugar. Para
ello, solo tiene que elevar la unidad completa, tal y como muestra
la imagen.
Suministro Eléctrico
1
Algunos modelos precisan una fuente de alimentación de Clase 2 o LPS
homologada que suministre electricidad directamente a la unidad.
Instrucciones Para Escanear
Los códigos de barras pueden colocarse delante del escáner mientras éste
permanece apoyado sobre el mostrador o el soporte opcional. También es
posible elevar y sostener el escáner/unidad como muestra la imagen.
Opción de interruptor mostrada
*Soporte opcional
1. Las unidades de desconexión del terminal (POT) no precisan una
fuente de alimentación.
®
18
Magellan 1000i
Modo de Exploración de Objetivo
Para leer un código de barras (solo opción de interruptor)...
•
•
Mantenga pulsado el interruptor. Aparecerá un haz para apun-
tar.
Centre el haz para apuntar lo más posible sobre el código de
barras que vaya a leer y suelte el interruptor para leer la eti-
queta.
El escáner no leerá códigos de barras mien-
tras el interruptor permanezca pulsado.
El modo de exploración de objetivo leerá los
códigos de barras en cualquier dirección.
El escáner volverá al modo de haz completo
una vez que haya transcurrido un tiempo con-
figurable.
NOTA
Solución de Problemas
Si el escáner no funciona correctamente, deberán realizarse las siguientes
comprobaciones:
1. Si el escáner utiliza una fuente de alimentación externa y dicha
fuente se ha averiado, el escáner no funcionará. Cambie la fuente de
alimentación por otra en buen estado y restablezca el funciona-
miento.
4
1
2
5
3
2. Compruebe que el cable de interfaz está perfectamente acoplado al
equipo central. Pida ayuda al personal de asistencia técnica o con-
sulte el manual del sistema central para comprobar que el escáner
esta correctamente conectado.
Guía de referencia rápida
19
3. Compruebe que el cable de la interfaz está perfectamente acoplado
al escáner.
4. Compruebe que los códigos de barras tienen la calidad suficiente
para ser reconocidos por el escáner. El escáner no leerá etiquetas
arrugadas, emborronadas o rasgadas. Para comprobar el funciona-
miento de la función de lectura del escáner, explore etiquetas que
1
contengan una simbología activa en buen estado .
5. Asegúrese de que el tipo de interfaz del escáner es compatible con el
terminal central. Para ello, consulte el manual del sistema POS y/o
la Guía de referencia del producto.
Si el escáner sigue sin funcionar correctamente, póngase en contacto con
su proveedor local o con el Departamento de Atención al Cliente de
PSC.
Nota de Conformidad
Este dispositivo cumple las normas recogidas en la Sección 15. El funcio-
namiento está sujeto a las condiciones siguientes:
1. Este dispositivo no causará interferencia peligrosa, y
2. Este dispositivo aceptará cualquier interferencia recibida, incluida
aquella que pueda causar un funcionamiento no deseado.
Este aparato digital de Clase A cumple la normativa canadiense ICES -003.
Clase de LED
CLASS 1 LED PRODUCT
APPARECCHIO LED CLASSE 1
APPAREIL A LED DE CLASSE 1
LED KLASSE 1
PRODUCTO LED de CLASE 1 EN60825-1
1. La lectura de distintas simbologías de códigos de barras puede acti-
varse o desactivarse de forma independiente en el escáner.
®
20
Magellan 1000i
Referência Rápida
Este guia é fornecido para ajudar a ter sua instalação funcionando rápida
e eficientemente. Para obter maiores detalhes, incluindo informações de
programação, consultar o Guia de Referência do Produto (PRG), que
está disponível para visualização e download a partir do web-site PSC lis-
tado na contracapa deste manual.
Instalação
Rotear o cabo de interface a partir do terminal ou do host. Ligar o
adaptador C.A. (se for usado um) em uma tomada na parede e o cabo de
interface (I/F), então rotear e conectar o cabo I/F ao leitor. Verificar a
operação apresentando códigos de barra em bom estado e reconhecidos
1
pelo leitor. A unidade deve emitir um bip e/ou lampejar sua boa leitura,
enviando os dados de código de barras para o host ou terminal. Caso
contrário, consultar a seção Diagnóstico deste guia.
A instalação do leitor está completa.
Para adaptadores
Cabo de interface
220-230 VAC, o fio
deve estar voltado
para baixo, como
mostrado na
Para Host/Terminal
ilustração. Se for
instalado para cima,
irá causar peso
indevido na saída do
soquete.
Adaptador C.A.
(se necessário)
Conectar
aqui
1. O comportamento do bip e do LED pode ser selecionado e pode estar
desabilitado por um usuário anterior.
Referência Rápida
21
Suporte Opcional
Um suporte opcional está disponível para o leitor, que pode ser
conectado permanentemente a uma parede ou um balcão. Após
localizar o balcão em uma boa posição , o leitor (paralelo ao
balcão) pode ser destacado para uso portátil, levantando a
unidade como mostrado abaixo.
Fornecimento de Energia
1
Alguns modelos exigem uma fonte de energia Listada Classe 2 ou Lis-
tada LPS, que fornece a energia diretamente para a unidade.
Como Fazer Leitura
Os códigos de barra podem ser apresentados ao leitor enquanto este está
no balcão ou na suporte opcional, ou o leitor/montagem pode ser levan-
tado e segurado como mostrado abaixo.
Opção com Botão
*Suporte opcional
1. Fornecimento de energia das unidades do tipo POT não exigem uma
fonte de energia externa.
®
22
Magellan 1000i
Modo de Leitura Direcionada
Para ler um código de barra (somente opção de butão)...
•
•
Pressionar e segurar o butão. Um padrão almejado irá aparecer.
Com o padrão almejado centrado no código de barra para ser
lido, soltar o butão para ler a etiqueta.
O leitor não irá ler códigos de barra enquanto
o butão estiver pressionado.
Modo de Leitura Etiquetado irá ler códigos de
barra em qualquer orientação.
O leitor irá retornar para o padrão total Omni
NOTA
Mode depois que um tempo configurável tiver
passado.
Diagnóstico
Se o leitor não estiver operando de forma apropriada, as seguintes to ver-
ificações devem ser realizadas:
1. Se o leitor usar um fornecimento de energia externo e este estiver
falhando, o leitor não irá operar. Trocar o fornecedor de energia
com um reconhecidamente bom e testar novamente a operação.
4
1
2
5
3
2. Verificar se o cabo de interface está conectado com segurança ao
host. Consultar seu suporte técnico ou o manual do sistema host
para verificar a conexão apropriada para o leitor.
Referência Rápida
23
3. Verificar se o cabo de interface está conectado de forma segura ao
leitor.
4. Verificar se os códigos de barra são de qualidade suficiente para
serem reconhecidos pelo leitor. Etiquetas dobradas, manchadas ou
molhadas podem fazer com que o leitor não as leia. Fazer o scan de
1
etiquetas boas de uma simbologia para verificar a operação de leit-
ura do leitor.
5. Garantir que o tipo de interface do leitor é compatível com o termi-
nal host, consultando seu manual do sistema PDV e/ou o Guia de
Referência do Produto.
Se o leitor não funcionar ainda adequadamente, contactar seu fornecedor
local ou os Serviços de Suporte ao Cliente.
Declaração de Conformidade
Este dispositivo atende às regras Parte 15. A operação é submetida às
seguintes condições:
1. Este dispositivo não pode causar interferências nocivas; e
2. Este dispositivo deve aceitar qualquer interferência recebida, inclu-
indo interferência que pode causar operação indesejada.
Este equipamento digital Classe A atende à norma Canadense ICES -003.
Classe LED
CLASS 1 LED PRODUCT
APPARECCHIO LED CLASSE 1
APPAREIL A LED DE CLASSE 1
EN60825-1
LED KLASSE 1
PRODUTO LED CLASSE 1
1. A leitura de várias simbologias de código de barra pode ser indepen-
dentemente habilitada ou desabilitada no leitor.
®
24
Magellan 1000i
快速参考
提供本指南帮助您迅速有效地安装和运行。欲知详情，
包括编程信息，请参阅产品参考指南(PRG)，可以从本指南封
底列出的PSC网站浏览和下载该指南。
安装
对从终端或主机来的接口电缆进行布线。将AC适配器(如
果使用了的话)插入墙壁上的电源插座和(I/F)电缆接口，然
后布线并将I/F电缆连接到扫描器。用已知的好条形码进行检
查。扫描器的喇叭
1应该鸣响并且/或者它的LED应该闪烁以表示读数正确，
同时将条码数据发送到主机或者终端。如果无鸣响或者
不闪烁，参阅本指南的故障检修部分。
至此，扫2描器安装完毕。
1蜂鸣器和LED的状态可选，并可由先前用户禁止。
快速参考
25
可选用机座
可使用可选机座将扫描器永久地装在墙壁或柜台上。将
机座放在一个最佳位置后，可以像图例所示的那样举起整个
扫描器(与机座一起)进行使用。
电源
有些型号要求使用所列出的第2类或者LPS电源3对
扫描器进行直接供电。
怎样进行扫描
将条码静止在柜台上或者可选机座上对着扫描器，或者
将扫描器/机座如图所示那样举起后进行扫描。
3
POT型不需要电源。
26
Magellan® 1000i
瞄准扫描模式
为了读条码 (仅适用于开关型) ，应该：
• 压下开关并保持，进入瞄准模式。
• 在瞄准模式下对准要读取的条码，松开开关读标签。
•
在开关被按着时扫描器不会读
条码。
瞄准扫描模式能在任意方向上
注意
读条码。
在一定时间之后扫描器将返回
到全向模式。
故障处理
如果扫描器不能正常工作，应当进行以下检查：
1.如果扫描器使用外部电源供电而外部电源发生故障，则扫
描器不会工作。用已知的能正常工作的电源进行替换并重
新进行试验。
2.检验接口电缆与主机是否牢固地连接。咨询技术支持人员
或参阅主机系统指南以核实扫描器是否已经适当的连接。
快速参考
27
3. 核查接口电缆是否牢固地与扫描器相连接。
4. 检查条码质量是否完好以便能让扫描器识别。起皱纹的、
弄脏的、或者撕坏的标签可能导致扫描器根本无法读出。
扫描已知完好的标签来检查扫描器的读操作。
5. 查阅POS系统手册和/或者产品参考指南确保扫描器的接
口类型与主机终端兼容。
如果扫描器仍然不能正常工作，可与本地供应商或者PSC
用户支持服务中心联系。
符合法规声明
本设备符合第15章有关规定。其操作符合以下条件：
1. 本设备不会引起有害的干扰；同时
2.本设备必须接受任何所接收的干涉，包括可能引发错误操
作的干涉。
A类数字式设备符合加拿大ICES-003。
LED类
第1类 LED产品
28
Magellan® 1000i
クイック・リファレンス
このガイドでは、迅速かつ効率的にインストール手順を実行するため
の情報を提供します。プログラミング情報を含む詳細については、製
品リファレンス・ガイド (PRG) を参照してください。PRG は、このマ
ニュアルの背表紙に記載されている PSC Web サイトからダウンロード
することができます。
インストール
インターフェース・ケーブルをターミナルまたはホストに接続します。
必要に応じて AC アダプタを壁コンセントおよびインターフェース
(I/F) ケーブルに接続し、I/F ケーブルをスキャナに接続します。状
態のよいバーコードをスキャンし、正しく作動するか確認してくださ
い。ユニットはビープ音1を発するか、読み取り正常LEDを点滅させ、
ホストまたはターミナルにバーコード・データを送信します。正しく
作動しない場合は、このガイドのトラブルシューティング・セクショ
ンを参照してください。
これで、スキャナのインストールが完了しました。
Ȁ
1
ビーパーおよび LED の動作は選択可能です。また、以前のユーザーにより無効にさ
れている場合があります。
クイック・リファレンス
29
オプションのスタンド
オプションのスタンドを使用すると、壁面または台上にスキャナを固
定することができます。スタンドを最適な位置に配置した後でも、図
のようにユニット全体を持ち上げることにより、スタンドを取り付け
たままスキャナを手持ちで使用することができます。
電源
一部のモデルは2、ユニットに直接電源を必要とします。
スキャンの仕方
スキャナを卓上またはオプションのスタンドに置いた状態、またはス
タンドを取り付けたスキャナを図のように持ち上げた状態で、バーコ
ードをスキャンすることができます。
2 POT (Power Off the Terminal) ユニットには電源は不要です。
30
Magellan® 1000i
目標スキャニング・モード
バーコードを読み取るには(スイッチ・オプション使用の場合のみ)…
•
•
スイッチを押したままにします。照準パターンが表示されま
す。
照準パターンを読み取るバーコードの中央に当て、スイッチ
を放してラベルを読み取ります。
スイッチを押したままの状態では、スキ
ャナはバーコードを読み取りません。
目標スキャニング・モードでは、任意の
向きのバーコードを読み取ることができ
ます。
注記
設定時間を過ぎると、スキャナはフル・
パターン・オムニ・モードに戻ります。
トラブルシューティング
スキャナが正しく作動しない場合は、以下の確認作業を行ってく
ださい。
1. 外部電源をお使いの場合は、外部電源が故障するとスキャナ
も作動しません。信頼できる電源装置と交換し、スキャナが
作動するか再テストしてください。
2. インターフェース・ケーブルがホストにしっかりと接続され
ていることを確認してください。スキャナの正しい接続方法
については、テクニカルサポートの担当者にお問い合わせい
ただくか、ホストのシステムマニュアルを参照してください。
クイック・リファレンス
31
3. インターフェース・ケーブルがスキャナにしっかりと接続さ
れていることを確認してください。
4. バーコードの状態がスキャナで認識するのに十分な状態であ
ることを確認してください。ラベルにしわ、汚れ、破れなど
があると、スキャナでまったく読み取れない場合があります。
有効なシンボル体系3が印刷された状態のよいラベルをスキ
ャンして、スキャナの読み取り機能をテストしてください。
5. スキャナのインターフェースのタイプとホストターミナルと
の互換性を確認してください。確認方法は、POS システムマ
ニュアルまたはスキャナの製品ガイドを参照してください。
上記の方法を実行してもスキャナが正しく作動しない場合は、お近く
のサプライヤーまたはPSCカスタマーサポートサービスまでご連絡く
ださい。
3
さまざまなバーコード体系ごとに、スキャナでの読み取りを有効または無効にする
ことができます。
適合性について
本製品は、VCCI に適合しています。操作は以下の条件に従います。
1. この装置は有害な干渉を起こさない。
2. この装置は、誤作動を起こす可能性がある干渉を含め、受信
したあらゆる干渉を受け入れなければならない。
本製品は、VCCI に適合したクラスB デジタル装置です。
LED クラス
クラス 1 LED 製品
32
Magellan® 1000i
PSC Inc. hereby declares that the equipment specified below has been tested and
found compliant to the following directives and standards.
EU Directives
89/336/EEC EMC
73/23/EEC Low Voltage
2002/96/EC WEEE
Standards
EMC: FCC part 15B Class B:2003 (US)
ICES-003 Class B:1997 (Canada)
VCCI Class B:2001 (Japan)
EN 55022 Class B:1998 (EU)
CNS 13438 Class B:1997 (Taiwain)
AS/NZS 3548 Class B:1998
GOST EMC approved (Russia)
CISPR 22 Class B:1992/1997 (World)
Product Safety: UL 60950-1:2003 (US)
CSA 60950:2003 (Canada)
EN 60950:2001 (Europe)
EN 60825-1/A2:2001 (EU)
IEC 60950-1:2001 (World)
IEC 60825-1:2001 (World)
NOM:1994 (Mexico)
Immunity: EN55024:2001 - ITE (EU)
EN 61000-3-2:2000 - Harmonic Current (EU)
EN 61000-3-3:1995 - Voltage Flicker (EU)
Quality Systems: ISO 9001:2000
BS EN ISO 9001:2000
Power Supply (optional):UL 60950 (US)
CSA 60950 (Canada)
EN 60950/IEC 60950 (World)
Most World Standards
Equipment Type: Barcode Scanning
Product Model Name: Magellan® 1000i
Serial Number Start Sequence: Cxxxxxxx
Date Placed into EU Service: December 2005
Responsible Manufacturer: PSC Inc./PSC Scanning, Inc.
959 Terry St. Eugene, OR 97402 US
Asia Pacific
Italy
PSC Hong Kong
PSC S.p.A.
Hong Kong
Vimercate (MI), Italy
Telephone: [39] (0) 39/62903.1
Fax: [39] (0) 39/6859496
Telephone: [852]-2-584-6210
Fax: [852]-2-521-0291
Australia
Japan
PSC Asia Pacific Pty Ltd.
North Ryde, Australia
Telephone: [61] 0 (2) 9878 8999
Fax: [61] 0 (2) 9878 8688
PSC Japan K.K.
Shinagawa-ku, Tokyo, Japan
Telephone: 81 (0)3 3491 6761
Fax: 81 (0)3 3491 6656
France
Latin America
PSC S.A.R.L.
PSC S.A., INC.
LES ULIS Cedex, France
Telephone: [33].01.64.86.71.00
Fax: [33].01.64 46.72.44
Miami, Florida, USA
Telephone: (305) 591-3222
Fax: (305) 591-3007
Germany
United Kingdom
PSC GmbH
PSC Bar Code Ltd.
Darmstadt, Germany
Telephone: 49 (0) 61 51/93 58-0
Fax: 49 (0) 61 51/93 58 58
Watford, England
Telephone: 44 (0) 1923 809500
Fax: 44 (0) 1923 809 505
PSC Inc.
959 Terry Street
Eugene, OR 97402
Telephone: (541) 683-5700
©2005-2006 PSC
R44-2547 (Rev. A)
3/06
|
