Facsimile
Quick Reference Guide
Model No.
KX-PW708DLE5
KX-PW708DWE5
Main unit:
KX-PW708
Portable handset: KX-FKN516
KX-PW708DLE5
Thank you for purchasing a Panasonic facsimile.
Table of Contents
Finding the controls …………………………………………………………… 2
Installations and connections ………………………………………………… 4
Setting the date and time……………………………………………………… 7
Setting your facsimile telephone number …………………………………… 7
Setting your logo ……………………………………………………………… 8
Character input and command key table …………………………………… 9
Voice guide…………………………………………………………………… 10
Automatic dialing on the main unit ………………………………………… 11
Automatic dialing on the portable handset (KX-FKN516) ……………… 12
Repeat call dialing ………………………………………………………… 13
Intercom ……………………………………………………………………… 14
Sending faxes ……………………………………………………………… 15
Receiving faxes……………………………………………………………… 16
Operating the built-in answering device ………………………………… 17
Night mode…………………………………………………………………… 18
Call block …………………………………………………………………… 19
Specifications ………………………………………………………Back cover
This guide explains some basic features and operations, but not all of them.
For further details, see the Japanese operating instructions.
This product is designed for use in Japan.
Panasonic cannot provide service for this product if used outside Japan.
Any details given in this guide are subject to change without notice.
This unit is equipped with the voice guide features. (Japanese only)
For details about voice guide, please see page 10.
Finding the controls
Portable handset (KX-FKN516)
Liquid crystal display
Earpiece
How to use
key
●
To use the phonebook.
●
To redial the phone
numbers in the redial
list. The last 10 phone
numbers dialed are
stored in memory.
Portable handset number
(and name)
No link to the main unit
Function menu that is
●
●
To change Hiragana into
Kanji.
To adjust the volume.
controlled by
or
■
To adjust the ringer
Battery strength
volume when the portable
handset is on stand by
(Select “呼出音量”)
How to use
buttons
(press
and
buttons refer to the function
repeatedly)
or
displayed on the bottom of the display.
They function differently depending on
the mode.
■
■
To adjust the receiver
volume while talking,
press
repeatedly
To adjust the speaker
Secure button
While the portable handset is
ringing, press this button.
The portable handset
volume while listening to
the recorded messages or
using the speakerphone,
●
press
repeatedly
announces a message to the
caller . The message is
announced in Japanese and
means “This unit is currently
set to Caller Verifying mode.
Could you please speak out
your name?”
●
To make/answer calls.
●
●
To end a call.
To end or exit from editing or
other operations.
To talk to the caller,
Microphone
●
●
To put a call on hold.
To start a search in the
Number Display log.
(For Number Display
service users.)
press
.
Do not cover the
microphone while
talking.
To hung up, press
.
Mute button
●
To mute your voice to the
other party by pressing this
button for about 2 seconds.
(To release the mute,
●
To page the main unit
and/or portable handset(s).
press this button again.)
Dial buttons
Tone button
●
●
For call waiting service
users.
To clear letters/numbers.
●
To switch to tone dialing.
Sharp button
Key lock button
●
To lock the portable handset so that no calls or setings
can be made. To turn key lock on, press this button for
about 3 seconds until a single beep is heard.
●
●
To use the speakerphone.
“
” is displayed.
●
To turn key lock off, press this button for about 3
seconds until a single beep is heard.
3
Installations and connections
Installing the ink film
1
Open the control panel.
2
3
Open the back cover.
Insert the orange
gear into the left slot
of the main unit.
Insert the ink film.
Insert the white gear into the right slot
of the main unit.
If the ink film is slack, tighten it by
winding this gear (orange).
4
5
Close the back cover pressing
” down on both sides
until it clicks into place.
“
6
Close the control panel.
When the unit runs out of ink film, the following message will be displayed.
フィルムなし
U23
交換してください
品 番:
KX-FAN190
Install a new ink film.
Replacement ink film:
KX-FAN190 (15 m)
KX-FAN190W (15 m X 2)
KX-FAN191 (15 m) (*1)
¥714
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
than does the KX-FAN190/190W.
¥1,208
¥893
KX-FAN191W (15 m X 2) (*1) ¥1,523
・As of October 2008.
・Tax included.
4
Installations and connections
Installing recording paper (A4 size)
1
Open the recording paper tray.
2
Set up the recording paper stands.
Pull out the front stand first.
3
Insert the recording paper into the
recording paper tray. (Up to 15 sheets)
Recording paper
�
�
Printing side is
on the back.
Fan the stack of recording paper.
Folding the recording paper tray
1 Remove the recording paper and fold the recording
2 Close the recording paper tray.
paper stands in.
5
Installations and connections
Connecting the main unit
Setting up the portable handset
(KX-FKN516)
1
Raise the antenna.
1
Press
on the battery cover and slide the cover.
2
Connect the cord and
place the handset on
the main unit.
2
Insert the battery into the compartment and close the
battery cover.
Telephone line cord
(supplied accessory)
Wall jack
Battery
3
Connect the telephone line cord.
Power cord
Power outlet
(AC 100 V)
3
Connect the charger to the power outlet, then place
the portable handset on the charger for about
10 hours.
Connect the power cord.
Power outlet
(AC 100 V)
After the Power On...
1 This unit will automatically select the dialing
mode (Pulse/Tone).
2 When the following is displayed, press
(Stop).
選んでケータイの設定
If you cannot make a call...
Set the dialing mode with the main unit.
1. Press
2. Press
3. Press
(Function/Resolution).
.
(Search button) repeatedly until the
desired setting is selected.
Example :
Charger
回線種別
自動
After your Panasonic battery is fully charged,
it will last up to about 5 hours of conversation.
プッシュ: Tone
20: Pulse (20 PPS)
10: Pulse (10 PPS)
自動: Auto (Default)
4. Press
5. Press
(Set).
(Stop).
6
Setting the date and time
Setting your facsimile
telephone number
1
2
Press
Press
(Function/Resolution).
1
Press
Press
(Function/Resolution).
機能登録モード
機能登録モード
.
Example :
2
3
.
日付時刻
あなたの電話番号
2
2008
年
11
月
30
日
15
:
3 0
Enter your facsimile telephone number, up to
20 digits.
Example: 098 7654··
Cursor
+
3
Enter the correct year/month/day.
Example: December 1, 2008
Press
あなたの電話番号
+09887654 . .
.
日付時刻
The
(Tone) button replaces
2008
年
12
月
01
日
the digit with “+”.
15
:
3 0
1
The
(Hold/Call memory) button
4
5
Enter the correct hour/minute in a 24-hour clock entry.
Example: 15:45 (3:45 PM)
replaces the digit with a space.
Press
.
To correct a mistake, press
(Secure/Erase).
日付時刻
2
2008
年
12
月
01
日
15
:
4 5
4
5
Press
(Set).
Press
(Set).
登録しました
登録しました
日付時刻
あなたの電話番号
2
年
12
月
01
日
+09887654 . .
15
:
4 5
Press
(Stop).
6
Press
(Stop).
Example :
Example :
1
日
15
:
45
件
1
日
15
:
45
件
録音
0
録音
0
7
Setting your logo
Example: Micah
1. Press
once.
名前
:
印刷用
[
英
]
■
M
Cursor
2. Press
six times.
six times.
名i c前a:h印刷用
[
英
]
i
M
3. Press
名i cc前a:h印刷用
[
英
]
M
4. Press
to move the cursor to the next space
four times.
1
2
Press
Press
(Function/Resolution).
and press
機能登録モード
名i c前a:h印刷用
[
英
]
a
M
5. Press
five times.
.
名前
:
印刷用
[
英
]
名前 漢
:
印刷用
[
]
h
M
i c a h
■
_
Cursor
4
5
Press
(Set).
登録しました
3
Enter your logo, up to 30 characters, using the dial
keypad.
To enter English characters easily, press
名i c前a:h印刷用
[
漢
]
(Intercom/Edit/Character input mode) repeatedly
and select “英” (English and sign input mode).
For details, see the table on page 9 for instructions.
M
M
_
Press
(Stop).
Example :
1
日
15
:
45
件
録音
0
8
Character input and command key table
Pressing the dial keys will select a character as shown below.
Character
Hiragana
Katakana
English
Numbers
Display of the
main unit and the
portable handset
[漢]
[カナ]
[英]
[数]
Dial key
Portable
handset
KX-FKN516
Main
unit
(
)
(
)
あいうえお
ぁぃぅぇぉ
アイウエオ
ァィゥェォ
^
@ . _ – & $ ¥ % + = ~
1
かきくけこ
カキクケコ
A B C a b c
D E F d e f
2
3
4
5
6
7
8
9
さしすせそ
たちつてとっ
なにぬねの
はひふへほ
まみむめも
やゆよゃゅょ
らりるれろ
サシスセソ
タチツテトッ
ナニヌネノ
ハヒフヘホ
マミムメモ
ヤユヨャュョ
ラリルレロ
G H I g h i
J K L j k l
M N O m n o
P Q R S p q r s
T U V t u v
W X Y Z w x y z
! ? / ー
( ) [ ] { }〈 〉「 」
# ‚ ; : |・ ’ ”
わをんー!? ( )
゛°、。
ワヲンー!? ( )
0
、 。
Used to change the character input
mode.
(Main unit),
(Portable handset)
Used to move the cursor to the left
and right.
(Main unit),
(Portable handset)
Command keys
Used to delete a character.
Used to insert a space.
(Main unit),
(Main unit),
(Portable handset)
(Portable handset)
The characters on the display are somewhat different from those shown in the character input and command key table.
9
Voice guide
Operation guide
The unit starts the following voice guidance in Japanese:
Operations
To cancel the operation guide (using the main unit)
Send a fax
“
”
(Select
)
なし
Copy
Add entries to the phonebook
Store entries in the repeat call dialer
“
”
(Select
)
なし
Make a call using the phonebook/redial/
call memory
“
“
”
”
(Select
(Select
)
なし
なし
Change a ink film
Print fax documents from the main unit
memory
)
Reading-out dial
The unit announces the number dialed in Japanese, when you make a call with the main unit.
To cancel the reading-out dial
(Select “なし”)
Reading-out phonebook
The unit reads out stored names* when the phonebook is searched.
To cancel the reading-out phonebook
(Select “なし”)
Incoming name announcement (for Number Display service
subscribers only)
The unit announces the caller’s name* when a call is received from a caller whose name and phone number are
stored in the phonebook.
To cancel the incoming name announcement
(Select “なし”)
* Names will only be read out when their “ フリガナ ” (readings) are stored in katakana in the phonebook.
English, numbers and signs in “ フリガナ ” are not read out.
10
Automatic dialing on the main unit
Storing names and telephone
numbers in the phonebook
Making a voice call using the
phonebook
1
2
Press
(Phonebook).
Press
(Search button) repeatedly until the
desired name is displayed.
3
Lift the handset.
Editing a stored name or number
in the phonebook
1
Press
(Phonebook).
1
Press
(Phonebook).
“XXX” shows the remaining
station numbers you can
store.
電話帳空き XXX
件
登録は[ 決定 ]押
す
2
Press
(Search button) repeatedly until the
検索は[ , ]押
す
desired name is displayed.
You can program up to
150 stations, including
4 pre-programmed stations.
3
4
Press
(Intercom/Edit/Character input mode).
2
3
Press
(Set).
Edit the name (see the table on page 9 for
instructions).
名前
?
[
漢
]
■
_
If you do not need to edit the name, skip to step 5.
5
6
Press
(Set).
Enter the name, up to 20 characters (see the table on
page 9 for instructions).
Edit the kana.
If you do not need to edit the kana, skip to step 7.
4
5
Press
(Set) 2 times.
7
8
Press
(Set).
Enter the telephone number, up to 24 digits.
To correct a mistake, press
(Secure/Erase).
Edit the telephone number.
If you do not need to edit the telephone number,
skip to step 9.
6
7
8
Press
(Set).
9
Press
(Set).
Enter the group number (
to
).
10 Edit the group number.
Press
(Set).
If you do not need to edit the group number,
To program other items, repeat steps 3 to 8.
skip to step 11.
11 Press
(Set).
9
Press
(Stop) to exit the program.
12 Press
(Stop).
11
Automatic dialing on the portable handset (KX-FKN516)
Storing names and telephone
numbers in the phonebook
Making a voice call using the
phonebook
1
2
Press
(Phonebook).
Press
(Search button) repeatedly until the
desired name is displayed.
3
Press (Talk).
Editing a stored name or number
in the phonebook
1
2
Press
(Phonebook).
1
2
Press
(Phonebook).
検索は
を押す
[
,
]
Press
(Search button) repeatedly until the
desired name is displayed.
Press
.
“XXX” shows the remaining
station numbers you can
store.
名前
?
3
Press
.
空き ×××
件
4
Edit the name (see the table on page 9 for
instructions).
You can program up to
150 stations, including
4 pre-programmed stations.
If you do not need to edit the name, skip to step 5.
5
6
Press
.
3
Enter the name, up to 20 characters (see the table on
page 9 for instructions).
Edit the kana.
If you do not need to edit the kana, skip to step 7.
4
5
Press
2 times.
7
8
Press
.
Enter the telephone number, up to 24 digits.
To correct a mistake, press
(Flash/Erase).
Enter the correct telephone number.
If you do not need to edit the telephone number,
6
7
8
Press
.
skip to step 9.
Enter the group number (
to
).
9
Press
.
Press
.
10 Edit the group number.
To program other items, repeat steps 3 to 8.
If you do not need to edit the group number, skip to
step 11.
9
Press
(Off) to exit the program.
11 Press
.
12 Press
(Off) to exit the program.
12
Repeat call dialing
When you make a call using the repeat call dialer and the recipient’s line is busy, the unit will automatically redial the
number up to 15 times at 30-second intervals.
Storing telephone numbers in the
repeat call dialer
Making a voice call using the
repeat call dialer
You can store up to 3 telephone numbers for the repeat
call dialer. The dialing buttons (
memory stations.
to
) function as
1
2
Press
(Repeat call).
Press the memory station number (
to
).
If the line is busy, the unit redials the number up to
15 times automatically.
3
When the other party answers, lift the handset.
Editing a stored telephone
number in the repeat call dialer
1
2
Press
(Function/Resolution).
Press
(Repeat call) and the memory station
1
2
Press
Press
(Function/Resolution).
(Repeat call).
number (
to
).
機能登録モード
3
4
Move the cursor to the number you want to edit and
press (Secure/Erase).
くり返しコール番号?
Enter the correct number, then press
(Set).
押
[
1
-
3
]
す
5
Press
(Stop) to exit the program.
3
4
Press the memory station number (
to
).
くり返しコールが
登録されて
いません
Erasing a stored telephone
number in the repeat call dialer
Enter the telephone number, up to 24 digits.
1
2
Press
(Function/Resolution).
To correct a mistake, press
Example:
(Secure/Erase).
電話番号
?
Press
(Repeat call) and the memory station
0987654
number (
to
).
5
6
Press
Press
(Set).
3
4
Press
(Secure/Erase) for more than 2
seconds, then press
(Set).
(Stop) to exit the program.
Press (Stop) to exit the program.
13
Intercom
An intercom is available between the portable handsets or between the main unit and portable handset(s).
Using the main unit:
Using the portable handset (KX-FKN516):
1
For single portable handset users
1
For single portable handset users
Press (Intercom).
1 Lift the handset.
電話番号
?
For multiple portable handset users
1 Press (Intercom).
2 Press
(Intercom/Edit/Character input
mode).
2 Call the main unit and/or portable handset(s) in
the following ways:
子機1呼出中
– To call a specific portable handset, press the
portable handset number (
you want to call.
to
) which
For multiple portable handset users
1 Lift the handset.
– To call the main unit, press
.
– To call the main unit and all the portable
handsets, press
2 Press
(Intercom/Edit/Character input
.
mode).
3
Call the portable handset(s) in the following ways:
– To call a specific portable handset, press the
2
3
Start talking.
内線通話中
portable handset number (
you want to call.
– To call all the portable handsets, press
to
) which
.
Press
(Off) to end the intercom call.
2
3
Start talking.
Example :
子機1内線通話中
Replace the handset to end the intercom call.
14
Sending faxes
Sending a fax manually
Sending a fax using automatic
dialing
Document
Document cover
Document
FACE UP
Document
guides
FACE UP
Using the phonebook
1
2
3
Open the document cover, and adjust the width of the
document guides to the size of the document.
1
Insert the document (up to 5 pages) FACE UP until a
single beep is heard.
Insert the document (up to 5 pages) FACE UP until a
single beep is heard.
2
3
Press
(Phonebook).
Press
(Search button) repeatedly until the
If necessary, press
repeatedly to select the
desired name is displayed.
desired resolution while “画 質=” is displayed
(see below).
4
Press
(Fax).
The unit will start fax transmission.
4
5
6
Press
(Fax).
Using the repeat call dialer
Dial the fax number.
1
Insert the document (up to 5 pages) FACE UP until a
single beep is heard.
Press
(Fax).
The unit will start fax transmission.
2
3
Press
(Repeat call).
Press the memory station number (
to
).
The unit will start fax transmission.
To select the resolution
Select the desired resolution according to the type of document, by pressing
To display “画 質=”, press (Function/Resolution) once or twice.
repeatedly while “画 質=” is displayed.
(Standard) for printed or typewritten originals with normal-sized characters.
(Fine) for originals with minute printing.
画 質
画 質
画 質
=
=
=
ふつう字
小さい字
(Photo) for originals containing photographs.
写真
15
Receiving faxes
Receiving a fax manually
(AUTO ANSWER off)
2
When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
Using the main unit:
press
.
3
4
Press
(Search button) repeatedly until the
” is displayed, then press
“ファクス受信
.
Press
.
The main unit will start fax reception.
1
2
When you hear a ring, lift the handset to answer the
call.
Receiving a fax automatically
(AUTO ANSWER on)
When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
light on
press
(Fax), then replace the handset.
The unit will start fax reception.
Using the portable handset (KX-FKN516):
1
2
If the
(Auto answer) light is off, turn it on by
pressing
.
When receiving a call, the unit will receive a fax
document or record a voice message automatically
depending on the caller’s request.
1
When you hear a ring, lift the portable handset from
the charger, then press (Talk) to answer the call.
16
Operating the built-in answering device
Recording your own greeting
message
Activating the answering device
1
2
Turn the
(Auto answer) light on by pressing
.
light on/
flash
When receiving a call, a greeting message will be
played and the unit will record a voice message.
To record your own greeting message, see left.
Listening to recorded messages
When new messages are recorded, the
(Auto
answer) light will flash.
Press
to listen to recorded messages.
You can record your own greeting message. When
receiving a call, it will be played to callers instead of the
pre-recorded Japanese greeting message.
After the messages are played back, the following will be
displayed.
再生した用件を
消去しますか?
To erase the messages, press
To save the messages, press
.
.
はい
=
いいえ
=#
1
2
Press
Press
(Function/Resolution).
.
Listening to all of the recorded
messages
自作応答録音
押
Press
recorded.
(Playback) when new messages are not
[決定]
す
3
4
5
Press
(Set).
When new messages are recorded, only the new
messages will be played back.
Lift the handset.
After all of the recorded messages are played back, the
following will be displayed.
Press
(Set) and speak your greeting message
To erase the messages, press
.
すべて
after a beep, up to 16 seconds, to the handset.
消去しますか?
To save the messages, press
.
はい
=
いいえ
=#
6
Press
(Stop) and replace the handset.
Erasing a specific message
Your greeting message will be played back
automatically.
Press
(Secure/Erase) while listening to the
message you want to erase, then press
.
Erasing your own greeting
message
Erasing all of the recorded
messages
1
2
Press
Press
(Function/Resolution).
.
1
2
Press
Press
(Function/Resolution).
.
用件全消去
自作応答消去
押
[決定]
押
す
[決定]
す
3
4
Press
Press
(Set).
3
4
Press
(Set).
.
Press
.
The pre-recorded Japanese greeting message will
be played when you receive a call.
17
Night mode
Operating the built-in
answering device
Turn on the night mode
Operating the answering device
from a remote location
light on
Press
(Night mode) for about 3 seconds.
“ ”
is displayed and
lights on.
Preparation: Programming the remote operation ID
When a call is received during night mode, the unit
will handle the call silently, either by storing the
received fax into memory or by recording the caller’s
message.
1. Press
(Function/Resolution).
2. Press
.
3. Enter any 4-digit number (remote operation ID) except
Night mode allows you to select a block of time
during which the unit will not ring for outside calls
or make sounds when you change the settings.
This feature is useful when you do not want to be
disturbed, for example, while sleeping.
or #.
Example :
留守電暗証番号
234
1
4. Press
(Set).
5. Press
(Stop).
Listening to recorded messages
When new messages are recorded, the following will be
displayed.
新しい用件が
Operation: Listening to a recorded message from a
remote location
録音されました
Press
(Playback) to listen to recorded messages.
After the messages are played back, the following will be
displayed.
Turn the
(Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
再生した用件を
消去しますか?
To erase the messages, press
To save the messages, press
.
.
1. Call your unit.
2. Enter the remote operation ID during the greeting
はい
=
いいえ
=#
message.
Printing received fax documents
2
3. Press or wait 4 seconds.
When new faxes are received, the following will be
Only the new recorded messages will be played
displayed.
ファクスが
届いています
back.
4
To listen to all the recorded messages, press after
印刷は[決定]押
す
the new messages have been played back.
Press
(Set) 2 times to print fax documents.
Turn off the night mode
Press
(Night mode) for about 3 seconds.
18
Call block
Blocking the incoming calls
Using the main unit:
Using the portable handset (KX-FKN516):
To block a call using a message
To block a call using a message
While the unit is ringing, press
OR
(Block).
While the unit is ringing, press
2 times.
OR
While you are on an incoming call,
While you are on an incoming call, press
(Block),
then press
.
1
2
Press
Press
.
The unit announces a message to the caller
2 times, then hangs up automatically. The message
is announced in Japanese and means
(Search button) repeatedly until “通話拒否”
is displayed.
“We’re sorry, but your call cannot be connected.”.
3
Press
2 times.
The unit announces a message to the caller
2 times, then hangs up automatically. The message
is announced in Japanese and means
To block a call using chimes
“We’re sorry, but your call cannot be connected.”.
To block a call using chimes
1
2
While you are on an incoming call, press
(Block).
1
2
While you are on an incoming call, press
.
Press
.
Press
(Search button) repeatedly until “通話拒否”
Chimes are heard by the caller.
is displayed, then press
.
3
Explain to the caller that a visitor came and hang up.
3
4
Press
(Search button) repeatedly until “チャイム” is
displayed, then press
.
Explain to the caller that a visitor came and hang up.
For Number Display service subscribers
If you subscribe to Number Display service, the message heard by the caller will change according to the caller’s
situation.
Example : If the caller requested not to send caller’s information, the message heard by the caller will change to mean
“Your phone number is blocked by service provider. Please call again with adding ‘186’ to the beginning of
the phone number.”.
When the following is displayed after blocking an incoming call, you can set the unit to block the call from the same
telephone number.
Using the main unit:
Using the portable handswet:
迷惑設定
To block the call, press
.
迷惑設定
しますか
To block the call, press
.
しますか?
?
?
To cancel blocking, press
.
To cancel blocking, press
.
はい
=
いいえ
=#
=#
When the following is displayed, press
to cancel.
When the following is displayed,
press to cancel.
拒否設定
しますか
拒否設定
しますか?
はい
=
いいえ
19
Specifications
KX-PW708DLE5
KX-PW708DWE5
Main unit
Portable handset (KX-FKN516)
Battery charger
Ni-MH battery
Power supply
AC 100 V (50 Hz/60 Hz)
(Part no. KX-FAN51)
DC 3.6 V, 650 mAh
AC 100 V (50 Hz/60 Hz)
Transmission: Approx. 10 W
•ꢀCharging:
Reception:
Copy:
Stand by:
Approx. 13 W
Approx. 16 W
Approx. 0.7 W
Approx. 1.2 W
•ꢀStandꢀby:
Power
consumption
Approx. 0.5 W
(When the F-net service is not in use.)
Maximum(*1): Approx. 130 W
(When the portable handset
is off the charger.)
Approx. 86 X 296 X 191 mm
(without handset, projections)
Approx. 265 X 296 X 231 mm
(recording paper tray opened,
without handset, projections)
Dimensions
(H x W x D)
Approx. 171 X 44.5 X 33.5 mm Approx. 34 X 72.5 X 100.5 mm
Approx. 2.4 kg
(10 m ink film installed)
Approx. 157 g
Approx. 160 g
(battery installed)
Mass (Weight)
Operating
environment
5 °C – 35 °C, 45 % – 85 % RH (Relative Humidity)
KX-PW708DLE5
KX-PW708DWE5
Applicable line
Main unit
Public Switch Telephone Network (Pulse/Tone), F-Net, NCC Lines
DC resistance
275 W
Compatibility
G3 compatible
Document size
A4–A5 (Max. 210 mm in width, Max. 600 mm in length)
208 mm (A4)
Effective scanning size
Effective printing size
Transmission time
Modem speed
202 mm (A4 size plain paper)
Approx. 15 s/page (Original mode) (*2)
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic fallback
64-level
Halftone level
Horizontal: 8 pels/mm
Vertical : 7.7 lines/mm (Fine/Photo), 3.85 lines/mm (Standard)
Scanning density
Scanner type
Contact image sensor
Printer type
Thermal transfer printing on plain paper
Modified Huffman (MH), Original mode
A4: 210 mm x 297 mm (Plain paper)
Data compression system
Recording paper size
Greeting message: Digital recording system (up to 16 sec)
Pre-recording greeting message
Answering device
Memory capacity
ICM Recording:
Digital recording system (Approx. 12 min. in total) (*3)
Max. Approx. 50 pages (Only receiving fax etc.) (*4)
Max. Approx. 12 min. (Only recording message) (*3)
*1 When copying a 100 % black document.
*2 Transmission speed is based on an A4-size document of 700 characters sent in standard resolution at 9,600 bps. The
actual transmission speed depends upon the contents of the page, resolution, telephone line conditions and capability
of the other party’s machine.
*3 If there is a silent pause, the total recording time will be longer.
*4 The memory capacity is based on an A4-size document of 700 characters sent in standard resolution
(8 x 3.85 lines/mm).
C
Panasonic Communications Co., Ltd. 2008
PNQX1850ZA FK1008FG0
|