C7100/7300/C7500
Duplexer
Installation Instructions
Duplexer Part Number: 70040401
5. Close the front cover.
b. Scroll down to Installable
Phase 1 - Install
Options and click Duplex.
If you will be using the duplex
c. Under Change ‘Duplex’ Set-
unit to print complicated files
ting, click Installed.
with graphics, you need to pur-
chase and install 64 MB additional
printer memory (OKI # 70041001).
WINDOWS ME, 98 AND 95:
a. Click the Device Options tab.
1. Unpack the duplex unit and remove
any shipping materials.
b. Click Duplex.
c. Under Change setting for:
6. Turn on the printer.
2. Turn off the printer, then open the
front cover.
Duplex, click Installed.
Phase 2 - Activate the Duplex
Unit in the Driver
4. Click OK, then close the Printers
dialog box.
MACINTOSH® DRIVER (OSX)
WINDOWS® PCL DRIVER
1. As of OS 10.1.5, Apple has not
enabled Printer Options
1. Click Start — Settings —
Printers. The Printers dialog box
opens.
adjustment. Therefore, this
selection is unavailable.
2. Right-click the OKI C7100, C7300
or C7500 PCL printer icon, then
click Printing Preferences
(Windows 2000), Properties
(Windows XP, Me, 98, 95) or
Document Defaults (Windows
NT 4.0).
MACINTOSH® DRIVER (CLASSIC)
3. Locate the slides inside the printer.
1. Activate Chooser from the Apple
menu.
2. Select LaserWriter 8.
3. Click Printer — Setup.
4. Click Configure.
3. On the Paper tab, click Device
options. Or, with Windows XP,
select the Device Option tab.
5. Change the Duplex setting to
Installed.
4. Click Duplex option unit to select
6. Click OK twice.
it, then click OK.
7. Close Chooser.
5. Click OK, then close the Printers
dialog box.
4. Place the duplex unit guide rails on
the slides, then push the duplex unit
all the way into the printer.
WINDOWS POSTSCRIPT® DRIVER
1. Click Start — Settings —
Printers. The Printers dialog box
opens.
2. Right-click the OKI C7100, C7300
or C7500 PostScript printer icon,
then click Properties.
3. Change the setting:
WINDOWS XP, 2000 AND NT 4.0:
a. Click the Device Settings tab.
58364601
|