Oricom Secure 310 User Manual

DECT  
Digital Baby Monitor  
Secure 310  
User Guide  
TABLE OF CONTENTS  
3
iMporTAnT SAfETy inforMATion ....................................................... 4  
GETTinG STArTED .................................................................................. 7  
oriCoM DiGiTAl BABy MoniTor .......................................................... 8  
SETTinG Up.............................................................................................. 12  
USinG yoUr DiGiTAl BABy MoniTor ................................................... 17  
TroUBlESHooTinG................................................................................ 25  
WArrAnTy............................................................................................... 27  
4
impOrTANT SAFETy iNFOrmATiON  
important Safety information  
• It is very important that you read the User Guide carefully as it contains detailed  
information you will need to get the most from your Oricom Baby Monitor. If you  
have any issues setting up or using your Oricom Baby monitor please call our  
Customer support team. Our dedicated local team are more likely to be able to  
help you than the retailer where you made your purchase.  
• Your ORICOM Baby Monitor is designed to be an aid and should not be used  
as a substitute for responsible and proper adult supervision of a child.  
• The Baby Monitor has been designed to provide some added reassurance in  
the form of sound transmission for those times when you are not in the same  
room as your baby provided you always stay within hearing range of the baby  
monitor during use. Your Baby Monitor is not a medical device, nor a device  
to prevent cases of Sudden Infant Death Syndrome (SID'S) or "cot death",  
and you should not rely on it for your baby's wellbeing. It is important that you  
regularly check on your baby personally.  
• Make sure the Baby unit, Parent unit and mains adaptor cables are kept out  
of reach of your baby and other young children at all times, at least one metre  
away.  
• Never place the baby unit or parent unit inside your baby’s cot, bed or playpen.  
• Never cover the Parent or baby units with clothes, towels or blankets or any  
other item. Never use or place your Parent or Baby unit in or near moisture or  
water (e.g. near bath or pool). Immersing in water could cause electric shock  
and even death.  
impOrTANT SAFETy iNFOrmATiON  
5
• The installation location plays an important role in ensuring proper operation.  
Therefore, maintain a distance of at least one meter from other electronic  
equipment, such as microwave ovens or hi−fi devices, otherwise they could  
cause interference. During continual use the Baby unit power adaptors may  
become warm to the touch. This is normal and should not be a concern.  
Warning  
Risk of suffocation!  
Keep all packaging materials and protective foils out of reach of children.  
Do not place the AC Adaptor cable in a high "wear and tear" location. Never use a  
frayed or compromised cord.  
!
Battery safety  
• Batteries represent a hazard to health and the environment!  
• They contain toxic, ecologically hazardous heavy metals. Do not dispose of  
batteries in a fire as they may explode. Dispose of batteries according to local  
regulations, never in your household rubbish.  
• Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries. If  
a battery leaks, do not let the battery liquid touch skin or eyes. If this happens,  
immediately flush the affected areas with water, and seek medical assistance.  
Do not modify, remanufacture, attempt to insert foreign objects into the battery, or  
immerse or expose it to water or other liquids. Batteries may explode if damaged.  
6
impOrTANT SAFETy iNFOrmATiON  
• Use only the batteries supplied with the product. Improper use, or use of  
unapproved batteries may present a risk of fire, explosion, or other hazard, and  
may invalidate any approval or warranty.  
If you believe the batteries are damaged, remove product from the charger and  
stop using the product. Contact Oricom for assistance. Never use a damaged  
battery.  
Disposal  
Always dispose of your products at the end of their life in accordance with  
your local waste disposal requirements. packaging materials all cardboard  
and paper packaging should be recycled in accordance with your local council  
waste regulations.  
GETTiNG STArTED  
7
Got everything?  
• Baby unit  
This User Guide provides you with all the  
information you need to get the most from  
your oricom Digital Baby Monitor.  
• Parent unit  
• 2 x AA NiMH 1300mAh  
rechargeable batteries for  
Parent unit (pre-installed)  
please read this guide carefully and keep  
it for future reference.  
Need help?  
• Parent unit charger  
• 2 x power adaptors  
If you need assistance setting up or using your  
Oricom Digital Baby Monitor call our Support  
team on 1300 889 785. If you would like any  
additional or replacement rechargeable batteries  
for the parent unit (Part No.BAT1300MAH) order  
Our dedicated advisors are more likely to be able  
to help you than the retailer where you made  
your purchase.  
Alternatively, you may find the answer in the ‘Help’  
section at the back of this guide.  
Additional answers to Frequently Asked  
com.au  
8
OriCOm DiGiTAL BABy mONiTOr  
parent unit  
power on/off (on top of unit)  
Press and hold to switch the  
power on or off.  
lanyard attach point  
(top of unit)  
Baby sound level lEDs  
You can loop a lanyard  
Indicates the level of received  
sound. The LEDs will light up  
progressively as the sound  
increases. See page 18 for  
further information.  
(not supplied) through here.  
Mute All (on top of unit)  
Press to toggle the Parent unit  
receive volume between on  
and off.  
low battery status indicator  
Red light indicates the batteries  
are low and need re-charging.  
Mute low (on top of unit)  
Press to toggle the Baby unit  
microphone sensitivity between  
normal and Mute Low.  
link status indicator  
Steady green indicates that  
the Baby and Parent units are  
linked. Flashes green if not  
linked for the first 30 seconds.  
Flashes red if not linked for  
longer than 30 seconds.  
Also flashes green when the  
Talk button is pressed on the  
Parent unit to initiate parental  
talk back.  
Talk (on side of unit)  
Press to talk to your baby.  
Mute lED  
Steady red indicates that Mute  
All has been switched on.  
Amber indicates that Mute Low  
has been switched on.  
Microphone  
- Vol.  
Decrease speaker volume.  
+ Vol.  
Increase speaker volume.  
OriCOm DiGiTAL BABy mONiTOr  
9
parent unit charger  
front  
Charging light  
Red when the Parent unit is  
correctly placed on the charger.  
Back  
power socket  
For connection to the mains  
power socket via the power  
adaptor cable supplied.  
10 OriCOm DiGiTAL BABy mONiTOr  
Baby unit  
Microphone  
nightlight  
Press to switch the  
Nightlight on or off.  
power on/off  
Press and hold to  
switch the power  
on or off.  
find  
Press to emit an  
alert beep from  
the Parent unit –  
useful for finding  
the Parent unit if  
you’ve misplaced it.  
link indicator  
Steady green indicates  
that the Baby and Parent  
units are linked. Flashes  
green if not linked for the  
first 30 seconds.  
o
Flashes red if not linked for  
longer than 30 seconds.  
Also flashes green when  
the Talk button is pressed  
on the Parent unit to  
Nightlight illuminates  
around the base.  
initiate parental talk back.  
OriCOm DiGiTAL BABy mONiTOr 11  
Back of Baby unit  
power socket  
For connection to the mains power  
socket via the power adaptor cable  
supplied.  
12 SETTiNG up  
parent unit  
1. Plug one of the power adaptor cables into the socket marked  
on the back of  
the Parent unit charger and plug the other end into the mains power wall socket  
and switch the power on.  
2. Activate the batteries by pulling the plastic tab away from the back of the Parent  
unit.  
SETTiNG up 13  
3. Place the Parent unit into the charger. The red charging light will illuminate on  
the charger and the battery icon will start scrolling on the Parent until display to  
indicate that the batteries are being charged.  
Charging light  
Leave the batteries to charge for 16 hours to reach maximum charge.  
Warning  
Only use the power adaptors supplied. Using incorrect power may permanently  
damage your product. This product is designed for indoor use only.  
!
14 SETTiNG up  
Battery performance  
Rechargeable batteries in the Parent unit will last up to 20 hours in normal use. Please note that new  
batteries do not reach full capacity until they have been in normal use for several days.  
The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the  
performance time of the Parent unit. Eventually they will need to be replaced. New batteries can be  
obtained from the Oricom Digital Baby Monitor Support Centre 1300 889 785.  
The Parent unit rechargeable batteries will lose charge over a period of time, even if switched off.  
Battery low warning – parent unit  
When the batteries are low – approximately within 1 hour of running out – the Parent unit will emit a  
low battery alert and the low battery indicator on the unit will turn red. Place the Parent unit back on  
the charger to charge the batteries. To speed up the charging process turn the Parent unit off when  
charging if it’s not being used.  
You can still use your Parent unit to monitor your baby even when the batteries are low, provided it  
remains in the charger cradle to re-charge the batteries.  
Baby unit  
1. Plug the remaining power adaptor cable into the socket marked  
on the back  
of the Baby unit and plug the other end into the mains power and switch on.  
SETTiNG up 15  
Switch on and link the parent and Baby units  
1. Press and hold the  
button on the Baby unit for 1 second. The nightlight will  
briefly illuminate and then the green Link indicator will flash.  
2. Press and hold the  
button on the Parent unit until all the LEDs on the unit briefly  
illuminate. The green Link indicator will flash.  
Warning  
Never use non-rechargeable batteries in the Parent unit. Only use the recommended  
!
type – 2 x AA NiMH 1300mAh batteries. Using other types could permanently  
damage the unit. Charge the batteries as instructed in this user guide. The Parent  
unit can still be used when it is in the charger.  
removing the batteries  
If you ever need to remove the batteries, simply slide open the battery compartment cover and use the  
ribbon to eject the batteries.  
Once the units are Linked the green Link light on the top of the Parent unit and  
the green LED on the Baby unit will stop flashing and remain a steady green.  
The units are now ready to use.  
iMporTAnT  
The link confirmation between the two units is vital for use so they can communicate. If  
!
the link between the units is broken at any time, the Link indicators on the Parent and  
Baby units will flash green as they try to search for each other. After 30 seconds, if the  
link is still broken they will flash red and you will also hear an alert signal from the Parent  
unit.  
16  
SETTiNG up  
If the link is broken:  
• check that the mains power is plugged in and switched on at the Baby unit  
• check that both units are switched on  
• check that the batteries are charged in the Parent unit  
• check that the Parent and Baby units are within range of each other (in ideal  
conditions the range is up to 300 metres outdoors and 50m indoors)  
positioning your units  
The Baby unit should ideally be within 1m-2m of your baby for best performance.  
If you place the Parent and Baby units too close together you will hear a high pitched noise, this is  
normal. The units are designed to be located at a distance from one another, e.g. in separate rooms.  
17  
uSiNG yOur DiGiTAL BABy mONiTOr  
Switching on/off  
Switch the Baby unit on  
1. Press and hold the  
button for 1 second. The nightlight will briefly illuminate  
and then the green Link indicator will flash until it links with the Parent unit.  
Once linked the green Link indicator will remain on.  
Switch the parent unit on  
1. Press and hold the  
button on the Parent unit until all the LEDs briefly  
illuminate. The green Link indicator will flash.  
Once the units are linked the green Link indicators on the Parent and Baby  
units will stop flashing and remain a steady green. The units are now ready to  
use.  
Switch the Baby unit off  
1. Press and hold the  
switch off.  
button on the Baby unit. The green Link indicator will  
Switch the parent unit off  
1. Press and hold the  
button on the Parent unit until an audible alert sounds.  
The green Link indicator will switch off and the display will switch off.  
uSiNG yOur DiGiTAL BABy mONiTOr  
18  
Baby sound level lED indicators  
lEDs 1-2 = Green  
(or Amber if  
lEDs 3-4 = Green  
lEDs 5-7 = red  
Mute low is on)  
The seven LEDs across the top of the Parent unit light up to indicate the level  
of sound being received from the Baby unit. The LEDs light up progressively as  
the sound increases.  
lEDs 1-2 light up Green (or Amber if Mute Low is on, see page 18) when  
sounds of 57dB and 63dB are received.  
lEDs 3-4 light up Green when sounds of 69dB and 75dB are received.  
lEDs 5-7 light up Red when sounds of 83dB, 89dB or 95dB are received.  
Equivalent sound level examples:  
60dB-70dB = normal conversation  
75dB = loud conversation  
83-95dB = loud traffic noise  
uSiNG yOur DiGiTAL BABy mONiTOr  
19  
Adjust the parent unit loudspeaker volume  
There are 5 volume levels and off (Mute).  
The default loudspeaker volume is Level 3.  
1. Press  
or  
to select the required level. You will hear a difference in volume  
as you keep pressing the button(s).  
If you wish to switch the volume off, keep pressing  
until the Mute LED turns  
red (Mute All) or press the  
button.  
If you try and set the volume higher or lower than the 5 settings available on either unit you will hear an  
error tone.  
Setting the Parent unit volume to Off is the equivalent of switching the Mute All feature on. See page  
20 for more information on Mute All.  
20 uSiNG yOur DiGiTAL BABy mONiTOr  
Mute All feature – parent unit only  
The Mute All feature prevents any sound coming from the Parent unit  
loudspeaker. With Mute All on you can still monitor your baby using the Baby  
sound level LED indicators (page 18) and the Crying Alert (below).  
1. To switch Mute All on, press the  
Mute indicator will illuminated red.  
button located on the top of the unit. The  
2. To switch Mute All off, press the  
switch off.  
button again. The red Mute indicator will  
Setting the Parent unit loudspeaker volume to Volume off is the equivalent of switching the Mute All  
feature on.  
Crying alert  
The crying alert will only be activated if Mute All has been switched on (or if the  
Parent unit loudspeaker volume has been switched off), see above for information  
on the Mute All feature.  
With Mute All switched on, if your baby starts to cry you will not be able to hear the  
cries but if the cries sound above a certain level i.e. if they reach 83dB, which is the  
1st red Baby sound level LED, then the Parent unit will emit an audible beep.  
The crying alert is a ‘user alert’ as described on page 23.  
Mute low  
For discreet operation when you do not wish to hear any low level sounds, you  
can still monitor your baby using the Baby sound level LED indicators (page 18).  
uSiNG yOur DiGiTAL BABy mONiTOr 21  
When Mute Low is switched on, any sounds from the Baby unit to the Parent  
unit will be muted unless a sound is made above a set level. The set level  
are sounds that are louder than the first two green LEDs would register, as  
described in ‘Baby sound level LED indicators’ on page 18.  
If the  
or  
buttons are pressed whilst Mute All or Mute Low has been set then Mute All or Low  
will be switched off and the loudspeaker volume will return to Level 3 automatically.  
If the Parent unit receives sound up to the level of the first two LEDs then they  
will turn amber but no sound will be heard, if the sound rises above this level  
then the unit will un-mute so you can hear the sounds.  
1. To switch Mute Low on, press the  
unit. The Mute indicator will turn amber.  
button located on the top of the Parent  
2. To switch Mute Low off, press the  
button again. The amber indicator will switch off.  
Once the Mute Low sound threshold has been exceeded, baby sounds will be able to be heard for a  
further six seconds even if they do not reach the Mute Low threshold.  
Talk Back  
You can use the Parent unit Talk Back feature as a one way intercom to  
comfort and reassure your baby. By speaking into the Parent unit your baby will  
hear your voice from the Baby unit. Please note that when using Talk Back you  
will not be able to hear your baby until you release the  
button.  
1. Press and hold down the button on the Parent unit to speak to your baby.  
Whilst the  
units.  
button is depressed the green Link indicators will flash on both  
uSiNG yOur DiGiTAL BABy mONiTOr  
22  
You will be able to activate Talk Back mode even if other functions have been activated at the Baby  
unit like Music playback or Nightlight on.  
Do not press the  
button when the Baby unit and Parent unit are positioned in the same room.  
High-pitch noise will be generated if the  
button is pressed when Baby unit and Parent unit are  
close to each other or within 3 metres distance.  
When using Talk Back, hold the Parent unit approximately 30cm in front of your mouth when talking to baby.  
nightlight  
You can set a comforting nightlight on the Baby unit.  
Switch Baby unit nightlight on/off  
1. To switch on, press the  
2. To switch off, press the  
button.  
button.  
The Baby unit must be switched on for the nightlight to work, but need not be linked to the Parent unit.  
find  
You can press the  
button on the Baby unit to make the Parent unit sound  
an alert to help you find it if it’s been misplaced. If the Parent unit loudspeaker  
volume had been Muted (or set to volume off), the volume level will be reset to  
the default setting of Level 3.  
1. Press  
on the Baby unit. The paging alert will sound at the Parent unit.  
2. To stop the alert, press any button on the Parent unit or press the  
button  
again on the Baby unit. If no button is pressed after 2 minutes then the alert will  
automatically stop.  
uSiNG yOur DiGiTAL BABy mONiTOr  
23  
list of tones  
Your Baby Monitor unit can produce various tones. They have the following  
meaning:  
Tone  
Single tone  
Meaning  
Confirmation tone e.g. setting saved.  
Double tone (fast) Error tone e.g. max volume reached when  
adjusting volume.  
Double tone (slow) User alert e.g. crying alert, paging alert etc.  
Triple tone (fast)  
System alert e.g. link lost, battery low etc.  
User Alert tones can be silenced by pressing any button on the Parent unit.  
System Alerts can be silenced for a 5 minute period by pressing any button on  
the Parent unit.  
reset the units  
Resetting either units will return the settings at that unit back to its default  
settings.  
Resetting the units is only advisable if you are experiencing difficulties with your product. It is a useful  
feature that ensures your Baby Monitor is returned to its new “out of the box” settings.  
24 uSiNG yOur DiGiTAL BABy mONiTOr  
reset the parent unit  
1. Within 3 seconds of the Parent unit being switched on, press and hold the  
button for at least 10 seconds. The display will show reset for 2 seconds  
during the reset and then you will hear a confirmation beep once the reset has  
been performed.  
reset the Baby unit  
1. Within 3 seconds of the Baby unit being switched on, press the  
button for  
at least 10 seconds. You will hear a confirmation beep once the reset has been  
performed.  
TrOuBLESHOOTiNG 25  
Should you experience difficulties operating the SC310 please refer to the  
troubleshooting guide below. If you still experience difficulties please contact Oricom  
Customer Support on 1300 889 785 for assistance.  
Troubleshooting  
problems  
Solutions  
Link light does not − Check that both the Baby and Parent units are  
come on  
switched on.  
− Check that the batteries in the Parent unit are correctly  
installed and that they are charged.  
− Check that the mains power is plugged in and  
switched on at the Baby unit.  
− Check that the units are within range of each other.  
Link light is flashing − If you have pressed  
to use the Talk Back  
green  
feature, the Link light will flash to indicate one-way  
communication between the units.  
− The units are searching for a communication link.  
− Check units are within range of one another.  
− Check both units are turned on.  
Link indicator is  
flashing red  
− The link between your units is broken. You will also  
hear an alert on the Parent unit to let you know  
there is no communication between the units. If this  
happens, check that the mains power (or batteries) is  
correctly connected and that the units are within range  
of one another. See page 15 for instructions on linking  
the units.  
26 TrOuBLESHOOTiNG  
Battery low on  
Parent unit  
− Put the Parent unit back on the charger to charge.  
− Place Parent unit back on the charger as frequently  
as possible or ideally leave it on the charger to ensure  
the batteries remain charged.  
− To shorten the charging time you can turn the Parent  
unit off if it is not being used while it is charging.  
Parent unit remains − You may have set the volume too low, see page 19 to  
silent or very quiet  
increase the volume.  
− You may have switched a Mute feature on, see pages  
20-21.  
You can hear a high − The units might be too close to each other.  
pitched noise − The volume setting might be too high, see page 19.  
Talk back feature is − Check the units are linked.  
not working  
WArrANTy 27  
Warranty information (Australia)  
Oricom makes no other warranties or conditions, express or implied, including  
as to acceptable quality and fitness for a particular purpose, except as stated in  
this Warranty. Any implied warranties that may be imposed by law are limited in  
duration to the Warranty Period.  
Oricom warrants that the product is free from defects in materials or workmanship  
during the Warranty Period. This Warranty does not extend to any product  
from which the serial number has been removed or was purchased outside of  
Australia.  
This warranty in no way affects your statutory warranty rights under the  
Competition and Consumer Act 2010 or any other similar legislation.  
The Warranty Period will be 3 years from the date of purchase of the product  
evidenced by your dated sales receipt. You are required to provide proof of  
purchase as a condition of receiving warranty services.  
You are entitled to a replacement product or repair of the product according to  
the terms and conditions of this document if your product is found to be faulty  
within the Warranty Period. This Warranty extends to the original purchaser only  
and is not transferable. Batteries or Battery Packs (if supplied) with this product  
are covered under this warranty for a period of 90 days. Products distributed  
by Oricom are manufactured using new materials or new and used materials  
equivalent to new in performance and reliability. Spare parts may be new or  
equivalent to new. Spare parts are warranted to be free from defects in material  
or workmanship for thirty (30) days or for the remainder of the Warranty Period  
of the Oricom branded product in which they are installed, whichever is longer.  
28 WArrANTy  
During the Warranty Period, Oricom will where possible repair and if not replace  
the faulty product or part thereof. All component parts removed under this  
Warranty become the property of Oricom. In the unlikely event that your Oricom  
product has a re curring failure, Oricom may, subject to the Competition and  
Consumer Act 2010, at its discretion, elect to provide you with a replacement  
product of its choosing that is at least equivalent to your product in performance.  
Oricom does not warrant that the operation of the product will be uninterrupted or  
error free.  
Oricom is not responsible for damage that occurs as a result of your failure to  
follow the instructions that came with the product. These terms and conditions  
together with any specific terms and conditions contained in the user guide to the  
product purchased constitute the complete and exclusive agreement between  
you and Oricom regarding the product.  
No change to the conditions of this Warranty is valid unless it is made in writing  
and signed by an authorised representative of Oricom.  
Oricom will not be in breach of a warranty expressly set out in this User Guide  
or under the Competition and Consumer Act 2010 and excludes any liability for  
damages or any other remedy arising under any other legislation or the common  
law if the damage occurs as a result of:  
1 failure by you to adhere to the warnings and follow the instructions set out in this  
user guide for the proper installation and use of the product;  
2 negligence on your part or misuse by you of the product;  
3 an uncontrollable external cause which results in the product not functioning  
including but not limited to power failure, lightning or over voltage; and  
WArrANTy 29  
4 modification to the product or services carried out on the production by anyone  
other than Oricom or Oricom's authorised service provider.  
Oricom will not be liable for any damages caused by the product or the failure of  
the product to perform, including any lost profits or savings or special, incidental  
or consequential damages. Oricom is not liable for any claim made by a third  
party or made by you on behalf of a third party. This limitation of liability applies  
whether damages are sought, or a claim made, under this Warranty or as a tort  
claim (including negligence and strict product liability), a contract claim or any  
other claim. However, this limitation of liability will not apply to claims for personal  
injury. Nothing in this Warranty excludes, restricts or modifies any condition,  
warranty, right or remedy which pursuant to the Competition and Consumer Act  
2010 applies to this Warranty and which may not be so excluded, restricted or  
modified. For warranties that cannot be excluded, restricted or modified, Oricom  
limits the remedies available to those specified in the relevant legislation.  
Customer Support  
If you have any problems setting up or using this product you will find use-full  
tips and information in the Troubleshooting section of this user guide as well as  
If you have further questions about using the product after reviewing the resources  
above or would like to purchase replacement parts or accessories please call our  
Customer Support Team. Our dedicated local support team are more likely to be  
able to help you than the retailer where you made your purchase.  
Please retain your purchase receipt and attach to the back page of this user guide  
as you will need to produce this if warranty service is required.  
Take a few moments to register your product online:  
Australia  
Australia  
New Zealand  
Oricom International Pty Ltd  
Phone: 1300 889 785  
Phone: 0800 674 266  
(Monday to Friday 10am to 8pm  
Locked Bag 658  
South Windsor, NSW 2756  
(Monday to Friday 8am to 6pm AEST)  
Fax: (02) 4574 8898  
NZST  
)

Sterling Power Products Dai 3000c 12xx User Manual
Sterling Power Products Ab24100 User Manual
Schumacher Sf 2151ma User Manual
Samsung Ch36cax User Manual
Samsung Aw09ph Series User Manual
Panasonic Cu E15gkr User Manual
NEC NP M311X User Manual
LG CMS4360F User Manual
GE AHD24 User Manual
DELL ULTRASHARP U2718Q User Manual