®
Mr.Slim
Ductless Air Conditioning And
Heat Pump Product Guide
MITSUBISHI ELECTRONICS AMERICA, INC.
HVAC DIVISION
3100 AVALON RIDGE PL. STE. 200,NORCROSS, GA 30071
CALL: 770-613-5840 OR 800-433-4822 (PRESS 3), FAX: 800-889-9904
® DUCTLESS AIR CONDITIONERS
AND HEAT PUMPS
Mr.Slim
Mr. Slim systems are unlike any other
products in the HVAC category. Actually they’re
a category in themselves because Mr. Slim is
probably the most unique innovation in air
comfort in two decades and one that has made
us the worldwide leader in ductless.
We designed Mr. Slim air conditioners and
heat pumps to solve cooling and heating
problems that other systems have never
addressed, specifically spot or zone cooling
and heating especially in retrofit situations.
These are voids in comfort that central air and
room air simply can’t fill economically and
attractively.
Where Mr. Slim Fits.
You’ll often encounter a hot or cold spot in
existing buildings that already have large
central systems. Is the answer to remodel and
make way for more ductwork? Obviously that’s
a small fortune. Should you opt for room air?
It’s unsightly at best, expensive to run, and a
real security hazard.
How Mr. Slim
Works.
Basically Mr. Slim is two units: an indoor air
handler and an outdoor compressor unit.
The two connect via refrigerant lines
through a three inch diameter opening in the
wall or ceiling. In fact that’s the toughest part of
installation: one hole.
Now you’re beginning to see how Mr. Slim
fits in. It’s the ideal supplemental system for
cooling or heating those smaller zones with
absolutely no ductwork, no remodeling, and
few disruptions to business and traffic.
You can locate the compact outdoor
compressor unit anywhere up to 164 feet away
from the air handler on select models: in many
cases. Many models have a front service panel
that clearly exposes all connections.
Our system is energy
efficient and whisper quiet.
Its remote control keeps all
operating functions and
data within a glance and
in easy reach. And it
neatly tucks away into
corners, blending in
The indoor air handler is as easy to install
as a ceiling fan. And both the indoor and
outdoor units are microprocessor controlled.
Simple remotes let you control all functions.
with the room’s decor.
COMFORT MADE SIMPLE.
MITSUBISHI ELECTRONICS
1
HVAC DIVISION
Medium-to-large capacity cooling and heating
for large area commercial applications
15
PC/PCH
LARGE AREA COOLING AND HEATING MADE SIMPLE.
Mr. Slim heat pumps also feature automatic
Intelligent Remote Controller
cooling/heating changeover for simple control
Highly advanced microprocessor technology is and lower maintenance. You never have to
one reason why Mitsubishi leads the air comfort readjust the unit.
category. This ultrathin microprocessor remote
controller with LCD display gives you a variety of
functions and options to keep room comfort
perfectly balanced. It lets you
check Mr. Slim’s operating
conditions with just a glance. In the
rare case of a malfunction the self-
diagnostic system even indicates
specific problems for easy repair.
Air Flow
• Computerized Dehumidification
These units offer a wide choice of air flow
directions. In the heating mode the vanes
automatically set the flow of warm air downward
at an angle of seventy degrees fahrenheit. In the
cooling mode the vanes automatically set the
flow of cool air outward (horizontally). But you
can override the automatic setting to blend air
flow. Four directions may be selected: one
hundred percent downward, eighty percent
downward and twenty percent horizontal, sixty
percent downward, and forty percent horizontal
or one hundred percent horizontal. Jumbo
louvers automatically rotate right and left for
uniform air distribution over your entire space.
• Operation Mode Setting (Heat, Auto, Cool/Dry)
• Temperature Setting (in units of two
degrees fahrenheit.)
• Self-Diagnostic Display
• Room Temperature Display
• Twenty-Four Hour On/Off Timer
• Fan Speed Indicator
• Auto/Swing Vane Operation
• Memory (for storing operation functions)
• Low Ambient Operation
• Whisper-Quiet Operation
• EMS Gateway Available To Management System
Via RS-232 Cable
Outdoor Compressor Unit
Redi-Charged System
Mr. Slim outdoor compressor units are
extremely efficient and reliable and true space-
savers.
Mr. Slim “P” series features the industry’s
first redi-charged refrigerant system. There’s no
longer any need to adjust the amount of
refrigerant to match the piping length on-site
unless lines exceed one hundred feet. You’ll
see a major reduction in installation time and
labor costs. Plus you can always count on Mr.
Slim’s reliability from day one because it’s
thoroughly charged and tested at the factory.
You know it’s going to work.
These models can be installed up to 164
feet away from the indoor unit. They connect
simply through a single three-to-four inch
opening in the wall or ceiling. No ductwork or
remodeling is necessary. As many as ten units
can be installed in a row for major space
savings.
Outdoor units are designed with a front-
access service panel that provides easy access
to all maintenance points.
Hot Start System
Mr. Slim heat pumps provide warmth right
from the beginning. At the start of heating and
during defrosting, a very low fan speed
prevents the unit from blowing cold air into
the room. And a microprocessor-controlled
booster heater speeds the warming process.
These units operate in outdoor
temperatures as low as zero degrees fahrenheit
when the optional wind baffle is
installed. So you can cool spaces
such as computer rooms year
round.
16
Air Conditioners
Heat Pumps
PC24EK
PCH24EK
PC24EK
Cooling Capacity: 24,000 BTU/h
SEER: 10.3
PCH24EK
Cooling capacity: 24,000 BTU/h
SEER: 10.3
Dimensions:
W:50-7/16”, D:26-13/16”, H:10-1/8”
Heating capacity:
27,000 BTU/h (33,500 w/ aux. booster heat)
HSPF: 7.1
Dimensions: W:50-7/16”, D:26-13/16”, H:10-1/8”
PC30EK
Cooling capacity: 31,000 BTU/h
SEER: 10.4
PCH30EK
Cooling capacity: 30,000 BTU/h
SEER: 10.0
Dimensions:
W:50-7/16”, D:26-13/16”, H:10-1/8”
Heating capacity:
33,000 BTU/h (41,500 w/ aux. booster heat)
HSPF: 7.1
Dimensions: W:50-7/16”, D:26-13/16”, H:10-1/8”
PC36EK
Cooling capacity: 36,500 BTU/h
SEER: 10.2
PCH36EK
Cooling capacity: 35,400 BTU/h
SEER: 10.4
Dimensions:
W:62-1/4”, D:26-13/16”, H:10-1/8”
Heating capacity:
38,000 BTU/h (47,600 w/ aux. booster heat)
HSPF: 7.4
Dimensions: W:62-1/4”, D:26-13/16”, H:10-1/8”
PC42EK
Cooling capacity: 42,500 BTU/h
SEER 10.0
PCH42EK
Cooling capacity: 42,000 BTU/h
SEER: 10.0
Dimensions:
W:62-1/4”, D:26-13/16”, H:10-1/8”
Heating capacity:
43,000 BTU/h (52,600 w/ aux. booster heat)
HSPF: 7.3
Dimensions: W:62-1/4”, D:26-13/16”, H:10-1/8”
beneath the base. This easy-access design lets
you arrange and install a number of units in a
small area.
Simplified Installation
Mr. Slim’s streamlined design makes indoor
units adaptable to an almost infinite variety of
room configurations. They’re simple to mount,
and they require a minimum of wiring. Naturally
they’re not only efficient but also whisper-quiet.
You’ll hardly hear them running.
Warranty
Mitsubishi is so confident of the reliability
of Mr. Slim® Systems that we offer a six year
warranty on the compressor and a one year
warranty on all other parts.
Refrigerant lines may be connected to the
outdoor unit from the front, rear, or side or
17
PC24EK
24,000
—
PC30EK
31,000
—
PC36EK
36,500
—
PC42EK
42,500
—
PCH24EK
24,000
27,000(33,500)
18,400(24,900)
2.46
PCH30EK
30,000
33,000(41,500)
18,000(26,500)
3.06
PCH36EK
35,400
38,000(47,600)
19,600(29,200)
3.53
PCH42EK
42,000
43,000(52,600)
24,800(34,400)
4.37
ITEM
MODEL
Cooling *1 BTU/h
Heating *1 BTU/h
Heating *2 BTU/h
Cooling *1 kW
Heating *1 kW
Heating *2 kW
*1
Capacity
—
—
—
—
Power
2.43
—
3.1
3.8
4.4
Consumption
—
—
—
2.42(4.32)
2.1(4.0)
9.8
3.13(5.63)
2.6(5.1)
9.8
3.4(6.2)
2.7(5.5)
10.0
4.3(7.1)
3.2(6.1)
9.6
—
—
—
—
EER
9.9
10.0
10.4
—
9.6
9.7
SEER
HSPF
COP
10.3
—
10.2
—
10.0
—
10.3
10.0
10.4
10.0
7.1
7.1
7.4
7.3
Heating *1
Heating *2
—
—
—
—
3.3
3.1
3.3
3.1
—
—
—
—
2.6
2.4
2.1
2.3
INDOOR UNIT
External Finish
Power Supply
PC24EK
PC30EK
PC36EK
PC42EK
PCH24EK
PCH30EK
PCH36EK
PCH42EK
Munsell 2.5Y 8/0.3 & N2
V, phase, Hz
115, 1, 60
15
230, 1, 60
25
Max. Fuze Size (time delay)
A
15
3
15
3
15
12
20
15
25
15
25
Min. Ampacity
Fan Motor
3
3
17
F.L.A.
A (kW)
CFM
1.8
1.8
2.1
2.4
0.7
0.7
1.3
1.3
12(2.8)
1,270-990
1,100-860
12.3
Auxiliary Heater
Airflow Hi-Lo
—
—
—
—
8.4(1.9)
920-740
830-670
7.0
10.8(2.5)
920-740
830-670
9.1
12(2.8)
1,270-990
1,100-860
10.9
Dry
1,050-850
900-730
7.2
1,050-850
900-730
9.6
1,270-990
1,100-860
11.1
1,270-990
1,100-860
12.6
Wet
CFM
Moisture Removal
Pints/h
Sound Pressure Level Hi-Lo dB(A)
Cond. Drain Connection OD in.
50-43
1
50-43
1
52-44
1
52-44
50-43
1
50-43
1
51-45
1
51-45
1
1
W
D
in.
in.
50-7/16
26-13/16
10-1/8
93
50-7/16
26-13/16
10-1/8
93
62-1/4
26-13/16
10-1/8
115
62-1/4
26-13/16
10-1/8
115
50-7/16
26-13/16
10-1/8
97
50-7/16
26-13/16
10-1/8
97
62-1/4
26-13/16
10-1/8
119
62-1/4
26-13/16
10-1/8
119
Dimensions
H
in.
Weight
lbs.
OUTDOOR UNIT
External Finish
PU24EK
PU30EK
PU36EK
PU42EK
Munsell 5Y 7/1
56
PU24EK
PU30EK
PU36EK
PU42EK
Sound Pressure Level
Power Supply
Max. Fuze Size (time delay)
dB(A)
55
55
55
55
55
55
53
40
V, phase, Hz
230, 1, 60
A
20
20
30
22
30
27
40
16
20
20
30
22
30
27
Min. Ampacity
Fan Motor
16
F.L.A.
0.65+0.65
NH33NBD
14
0.65+0.65
NH41NAD
17.5
0.75+0.75
NH47NAD
20
0.8+0.8
NH569NXA
11.5
0.65+0.65
NH33NBD
14
0.75+0.75
NH41NAD
17.5
0.75+0.75
NH47NAD
20
0.8+0.8
Model (Type)
R.L.A.11.5
L.R.A.54
NH569NXA
Compressor
73
87
105
54
73
87
105
Crankcase Heater
Refrigerant Control
Defrost method
W
A(W)
.17(39)
.17(39)
.17(39)
.17(39)
.17(39)
.17(39)
.17(39)
.17(39)
Capillary Tube
—
34-1/4
11-5/8
49-9/16
207
—
Reverse Cycle
38-3/16
in.
34-1/4
11-5/8
49-9/16
208
38-3/16
13-9/16
49-9/16
220
38-3/16
13-9/16
49-9/16
260
34-1/4
11-5/8
49-9/16
202
38-3/16
13-9/16
49-9/16
246
38-3/16
13-9/16
49-9/16
268
Dimensions
D
H
in.
13-9/16
in.
49-9/16
Weight
lbs.
245
REMOTE CONTROLLER
Control Voltage (by built- in transformer)
With Indoor Unit
Indoor unit-remote controller: DC 12V, Indoor unit-outdoor unit: DC 12V
Figures in parentheses include auxiliary heat.
* For 208 volt applications refer to Technical And Service Manual for ratings.
18
Medium-to-large capacity cooling and heating
for large area commercial applications.
19
PL/PLH
LARGE AREA COOLING AND HEATING MADE SIMPLE.
Mr. Slim heat pumps also feature automatic
cooling/heating changeover for simple control
and lower maintenance. You never have to
readjust the unit.
Intelligent Remote Controller
Highly advanced microprocessor technology
is one reason why Mitsubishi leads the air
comfort category. This ultra-thin microprocessor
remote controller with LCD display gives you a
variety of functions and options to keep room
comfort perfectly balanced. It lets you check Mr.
Slim’s operating conditions with
- W AY AIR FLO W
4
O N E PATTERN
- W AY AIR FLO W
just a glance. In the rare case of
a malfunction the self-diagnostic
system even indicates specific
problems for easy repair.
3
FO UR PATTERN S
- W AY AIR FLO W
2
SIX PATTERN S (Ex ce p t PL/ PLH3 0
•
3 6
•
4 2 FK)
• Computerized Dehumidification
• Operation Mode Setting (Heat, Auto, Cool/Dry)
• Temperature Setting (in units of two
degrees fahrenheit.)
Air Flow
These ceiling cassettes offer multi-
directional air flow in a number of various
patterns to direct heat or cool air where you
need it most. You can use two, three, or four
vents and even set the vents for a narrow or
wide breeze, depending on whether you prefer
a strong, directed stream of air or a gentle
breeze over a wide area. Air outlet vanes inside
the vents automatically swing up and down for
uniform air distribution.
• Self-Diagnostic Display
• Room Temperature Display
• Twenty-Four Hour On/Off Timer
• Fan Speed Indicator
• Auto/Swing Vane Operation
• Memory (for storing operation functions)
• Low Ambient Operation
• Whisper-Quiet Operation
• EMS Gateway Available To Management System
Via RS-232 Cable
Redi-Charged System
Mr. Slim “P” Series features the industry’s
first redi-charged refrigerant system. There is
no need to adjust the amount of refrigerant to
match the piping length on-site unless lines
exceed 100 feet. You’ll see a major reduction in
installation time and labor costs. Plus you can
always count on Mr. Slim’s reliability from day
one because they’re thoroughly charged and
tested at the factory. You know it’s going to
work.
Outdoor Compressor Unit
Mr. Slim outdoor compressor units are
extremely efficient and reliable and true space-
savers.
These models can be installed up to 164
feet away from the indoor unit. They connect
simply through a single three inch opening in
the wall or ceiling. No ductwork or remodeling is
necessary. As many as ten units can be
installed in a row for major space savings.
Hot Start System
Outdoor units are designed with a front-
access service panel that provides easy access
to all maintenance points.
Mr. Slim heat pumps provide warmth right
from the beginning. At the start of heating and
after defrosting, a very low fan speed prevents
the unit from blowing cold air into the room. And
a microprocessor controlled booster heater
speeds the warming process.
These
units
operate
in
outdoor
temperatures as low as zero degrees
fahrenheit. when the optional wind
baffle is installed. You can,
therefore, cool spaces such as
computer rooms year round.
20
PL34FK
Cooling capacity: 32,400 BTU/h
SEER: 10.0
Air Conditioners
Cassette Dimensions:
W:52-3/4” D:32-1/4” H:10-1/8”
PL42FK
Cooling capacity: 42,500 BTU/h
SEER: 10.0
Cassette Dimensions:
W:52-3/4” D:32-1/4” H:10-1/8”
PL12FK
PLH30FK
PL12FK
PLH30FK
Cooling capacity: 30,000 BTU/h
SEER 10.0
Heating capacity: 33,000 BTU/h
(41,200 w/ aux. booster heat)
HSPF: 7.1
Cassette Dimensions:
W:52-3/4” D:32-1/4” H:10-1/8”
Cooling capacity: 12,300 BTU/h
SEER: 10.4
Cassette Dimensions:
W:32-1/4” D:32-1/4” H:10-1/8”
Heat Pumps
PL18FK
Cooling capacity: 18,400 BTU/h
SEER: 10.2
Cassette Dimensions:
W:32-1/4” D:32-1/4” H:10-1/8”
PLH36FK
Cooling capacity: 35,400 BTU/h
SEER 10.4
Heating capacity: 38,000 BTU/h
(47,600 w/ aux. booster heat)
HSPF: 7.4
PL24FK
Cooling capacity: 23,600 BTU/h
SEER: 10.0
Cassette Dimensions:
W:32-1/4” D:32-1/4” H:10-1/8”
PLH18FK
PLH18FK
Cooling capacity: 17,300 BTU/h
SEER: 10.3
Heating capacity: 18,000 BTU/h
(24,500 w/ aux. booster heat)
HSPF: 7.0
Cassette Dimensions:
W:52-3/4” D:32-1/4” H:10-1/8”
Cassette Dimensions:
W:32-1/4” D:32-1/4” H:10-1/8”
PLH42FK
Cooling capacity: 42,000 BTU/h
SEER: 10.0
Heating capacity: 44,300 BTU/h
(53,900 w/ aux. booster heat)
HSPF: 7.3
Cassette Dimensions:
W:52-3/4” D:32-1/4” H:10-1/8”
PLH24FK
Cooling capacity: 23,100 BTU/h
SEER 10.3
Heating capacity: 25,000 BTU/h
(31,500 w/ aux. booster heat)
HSPF: 7.1
PL30FK
PL30FK
Cooling capacity: 31,000 BTU/h
SEER: 10.4
Cassette Dimensions:
W:32-1/4” D:32-1/4” H:10-1/8”
Cassette Dimensions:
W: 52-3/4” D:32-1/4” H:10-1/8”
efficient but whisper quiet, too. You’ll hardly hear
them running.
Slimmer Indoor Unit And Fresh
Air Intake
These models also feature a drain water lift-up
mechanism that saves space and makes drainage
pipe connection surprisingly simple.
The unit is specially designed for neat and tidy
installation. With minimum on-site work, branch
ducting and outside air ducting can be installed.
Refrigerant lines may be connected to the
outdoor unit from the front, rear, or side or beneath
the base. This easy-access design lets you
arrange and install a number of units in a small
area.
Branch Duct
12 Inch
10 Inch
Unit Height Drain Height
Panel Height 1 Inch
Warranty
Simplified Installation
Mitsubishi is so confident of the reliability
of Mr. Slim® Systems that we offer a six year
warranty on the compressor and a one year
warranty on all other parts.
Mr. Slim Ceiling Cassettes install as easily as
track lighting and make an extremely neat,
unobtrusive presentation. They require only a
minimum of wiring. Naturally they’re not only
21
ITEM
MODEL
PL12FK PL18FK PL24FK PL30FK PL34FK PL42FK PLH18FK PLH24FK PLH30FK PLH36FK PLH42FK
Cooling *1 BTU/h
Heating *1 BTU/h
Heating *2 BTU/h
Cooling *1 kW
12,300
—
18,400
—
23,600
—
31,000
—
32,400
—
42,500
—
17,300
23,100
30,000
35,400
42,000
Capacity
18,000(24,500) 25,000(31,500) 33.000 (41,200) 38,000 (47,600) 44.300 (53,900)
11,500 (18,000) 16,000(22,500) 20,800(29,000) 19,600 (29,200) 28,300 (37,900)
—
—
—
—
—
—
Power
1.23
—
1.88
—
2.48
—
3.10
—
3.76
—
4.40
—
1.77
2.42
3.20
3.53
4.27
Consumption Heating *1 kW
Heating *2 kW
1.6 (3.5) 2.48 (4.38) 2.97 (5.37) 3.40 (6.2) 4.38 (7.18)
—
—
—
—
—
—
1.4 (3.3)
9.8
2.0 (3.9)
9.5
2.6 (5.0) 2.70 (5.5) 3.4 (6.2)
EER
*1
10.0
10.4
—
9.8
10.2
—
9.5
10.0
—
10.0
10.4
—
9.6
10.0
—
9.7
9.4
10.0
7.1
10.0
10.4
9.8
10.0
7.3
SEER
HSPF
COP
10.0
—
10.3
10.3
7.0
7.1
7.4
Heating *1
Heating *2
—
—
—
—
—
—
3.3
3.0
3.3
3.3
3.0
—
—
—
—
—
—
2.4
2.3
2.3
2.1
2.4
INDOOR UNIT
PL12FK
PL18FK PL24FK PL30FK PL34FK
PL42FK
PLH18FK
PLH24FK
PLH30FK
PLH36FK
PLH42FK
External Finish
Galvanized sheets with gray heat insulation
Power Supply V, phase, Hz
Max. Fuze Size (time delay)
Min. Ampacity
115, 1, 60
230, 1, 60
25
A
15
2.0
15
2.0
0.85
—
15
2.0
1.1
—
15
2.0
15
15
20
15
20
15
25
17
25
17
2.0
3.0
17
Fan Motor
F.L.A.
0.75
1.0 + 1.0 1 .0 + 1 .0 1.2 + 1.2
0.55
8.4 (1.9)
600-390
540-350
5.3
0.6
0.5 + 0.5
0.5+0.5
0.6 + 0.6
Auxiliary Heater
Airflow Hi-Lo Dry
Wet
A (kW)
CFM
—
—
—
—
1,270-920
1,200-870
12.6
8.4 (1.9) 11.0 (2.4) 12.0 (2.8) 12.0 (2.8)
570-540
420-400
3.8
680-460 750-550 1,170-850
650-440 660-480 1 ,090-790
1,170-850
1,090-790
10.9
640-420
580-380
7.0
1,060-670 1,060-670 1,090-780
CFM
950-600
9.1
950-600
10.9
980-700
12.3
Moisture Removal
Pints/h
5.3
6.8
9.6
Sound Pressure Level Hi-Lo dB(A)
Cond. Drain Connection OD in.
43-35
45-38
47-39
49-41
49-41
49-42
45-38
47-39
49-41
49-41
49-42
1-1/4
Cassette
W
D
in.
in.
32-1/4
32-1/4
32-1/4
32-1/4
10-1/8
64
32-1/4
32-1/4
10-1/8
64
52-3/4
32-1/4
10-1/8
99
52-3/4
32-1/4
10-1/8
99
52-3/4
32-1/4
10-1/8
101
32-1/4
32-1/4
10-1/8
66
32-1/4
32-1/4
10-1/8
66
52-3/4
32-1/4
10-1/8
104
52-3/4
32-1/4
10-1/8
104
52-3/4
32-1/4
10-1/8
104
Dimensions
H
in. 10-1/8
60
Weight
External Finish
W
Marble White
57-1/8
36-5/8
2-3/8
Decorative
in.
36-5/8
36-5/8
2-3/8
22
36-5/8
36-5/8
2-3/8
22
36-5/8
36-5/8
2-3/8
22
57-1/8
36-5/8
2-3/8
35
57-1/8
36-5/8
2-3/8
35
36-5/8
36-5/8 .
2-3/8
22
36-5/8
36-5/8
2-3/8
22
57-1/8
36-5/8
2-3/8
35
57-1/8
36-5/8
2-3/8
35
57-1/8
36-5/8
2-3/8
35
Indoor grille Dimensions
D
H
in.
in.
Weight
OUTDOOR UNIT
External Finish
35
PU12EK PU18EK PU24EK PU30EK PU36EK PU42EK PUH18EK PUH24EK PUH30EK PUH36EK PUH42EK
Munsell 5Y 7/1
Sound Pressure Level dB(A)
Power Supply V, phase, Hz
50
53
55
55
55
56
230,1, 60
40
53
55
55
55
56
Max. Fuze Size (time delay) A
Min. Ampacity
15
11
20
16
20
16
30
20
30
22
20
16
20
16
30
20
30
22
40
27
27
Fan Motor
F.L.A.
0.65
0.75
0.65+0.65 0.65+0.65
0.75+0.75
0.8 + 0.8
0.75
0.65 + 0.65 0.75 + 0.75 0.75+0.75
0.8 + 0.8
NH569NXA
20
Model (Type)
RH167NAB RH247NAB NH33NBD NH41NAD NH47NAD NH569NXA RH247NAB
NH33NBD
11.5
NH41NAD
NH47NAD
17.5
Compressor R.L.A.
L.R.A.
8.9
29
12
37
11.5
54
14
73
17.5
87
20
12
37
14
73
105
54
87
105
Crankcase Heater
Refrigerant Control
Defrost method
W
A(W)
0.12 (28)
0.12 (28)
0.17(39)
0.12 (28)
0.17(39)
Capillary Tube
—
—
Reverse Cycle
38-3/16
in.
in.
34-1/4
11-5/8
34-1/4
11-5/8
33-1/2
154
34-1/4
11-5/8
34-1/4
11-5/8
38-3/16
13-9/16
49-9/16
220
38-3/16
13-9/16
49-9/16
260
34-1/4
11-5/8
33-1/2
131
34-1/4
11-5/8
49-9/16
202
38-3/16
13-9/16
49-9/16
246
38-3/16
13-9/16
49-9/16
268
Dimensions
D
H
13-9/16
in. 25-9/16
lbs. 105
49-9/16 49-9/16
207 208
49-9/16
Weight
245
REMOTE CONTROLLER
With indoor unit
Indoor unit-remote controller: DC 12V, Indoor unit-outdoor unit: DC 12V
1/2, 3/4 3/8, 5/8
Control Voltage (by built- in transformer)
REFRIGERANT PIPING SIZE
3/8, 5/8
1/2, 3/4
1/2, 7/8
Figures in parentheses include auxiliary booster heat.
* For 208 volt applications refer to Technical And Service Manual for ratings.
22
General Specifications
Notes: For MS/MSH, MF, MSM
*1. Rating conditions (cooling)_____ Indoor: 80˚F DB, 67˚F WB Outdoor: 95˚F DB, 75˚F WB
(heating)_____ Indoor: 70˚F DB, 60˚F WB Outdoor: 47˚F DB, 43˚F WB
*2. Include auxiliary electric heater operations at 115V. (MSH09EW, MSH12EN, MSH15EN)
*3. Rated voltage of compressor and fan motor is 115V. (MUM18EW)
*4. Values are for each indoor unit.
*5. Depth of outdoor unit ( ) includes thickness of fan grille.
Operating Range
Indoor air intake temperature
Outdoor air intake temperature
MODEL
Maximum
Minimum
Maximum
Minimum
95˚F DB, 71˚F WB
67˚F DB, 57˚F WB
80˚F DB, 67˚F WB
70˚F DB, 60˚F WB
115˚F DB
Cooling
67˚F DB
75˚F DB, 65˚F WB
17˚F DB, 15˚F WB
Heating
Notes: For PK/PKH, PC/PCH, PL/PLH
* 1. Rating conditions (cooling)_____ Indoor: 80˚F DB, 67˚F WB Outdoor: 95˚F DB, 75˚F WB
(heating)_____ Indoor: 70˚F DB, 60˚F WB Outdoor: 47˚F DB, 43˚F WB
* 2. Rating conditions (heating)_____ Indoor: 70˚F DB, 60˚F WB Outdoor: 17˚F DB, 15˚F WB
* 3. Heating capacity and power consumption in [ ] include auxiliary electric heater operation at 208/230V.
Operating Range
Indoor air intake temperature
Outdoor air intake temperature
MODEL
Maximum
Minimum
Maximum
Minimum
95˚F DB, 71˚F WB
67˚F DB, 57˚F WB
80˚F DB, 67˚F WB
70˚F DB, 60˚F WB
115˚F DB
Cooling
*5
0˚F DB
75˚F DB, 65˚F WB
17˚F DB, 15˚F WB
Heating
*5 With Wind Baffle installed.
REFRIGERANT TUBING SIZE
Refrigerant Tubing
Connection
Tubing (OD)/N
MODEL
Max. Height
Difference (ft)
Max. Tubing
Length (ft)
Method
Liquid
Gas
3/8
MS09EW, MSH09EW, MSM18EW
MF12EN, MF15EN
25
25
49
65
1/2
3/8
MSM30EN
MS09EW
1/4
(MS09EWX2•MS15ENX1)
MS15EN
5/8
25
49
MS12EN, MS15EN, MSH12EN, MSH15EN
Flared
PK18EK, PKH18EK, PL18FK, PLH18FK,
PK12EK, PL12FK
130
130
3/8
1/2
5/8
PK24EK, PKH24EK, PC24EK, PCH24FK,
PL24FK, PK24EK
164
164
PK30EK, PKH30EK, PL30FK, PLH30FK,
PC30EK, PCH30EK, PL36FK, PLH36FK,
PC36EK, PCH36EK, PL42FK2, PC42EK
3/4
7/8
PLH42FK, PCH42EK
*For more details refer to Technical And Service Manual. All specifications are subject to change without notice.
MITSUBISHI ELECTRONICS AMERICA, INC.
HVAC DIVISION
3100 AVALON RIDGE PL. STE. 200, NORCROSS, GA 30071
CALL: 770-613-5840 OR 800-433-4822 (PRESS 3) FAX: 800-889-9904
Form No. MIT-MRS-24-97
|
Schumacher Se 8050 User Manual
Sanyo Dc Inverter Split System Xhs1271 User Manual
Samsung Uqt24w6we User Manual
Samsung Aw12ph Series User Manual
Murphy Engine And Generator Controls Keystart 9620 User Manual
Lexmark Genesis S815 User Manual
DELL XPS 8500 User Manual
DELL 1815DN User Manual
BLACK DECKER NLP1800 User Manual
1024md Snowblower User Manual