OWNER’S MANUAL
Safety and Reference
LED TV*
*Disclaimer
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your TV
and retain it for future reference.
MT58* MT48*
Licenses
Preparing
Supported licenses may differ by model. For more information about
NOTE
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
y
y
The available menus and options may differ from the input
source or product model that you are using.
y
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
New features may be added to this TV in the future.
The TV can be placed in standby mode in order to reduce the
power consumption. And the TV should be turned off if it
will not be watched for some time, as this will reduce energy
consumption.
y
y
The energy consumed during use can be significantly reduced
if the level of brightness of the picture is reduced, and this will
reduce the overall running cost.
The items supplied with your product may vary depending on
the model.
Product specifications or contents of this manual may be
changed without prior notice due to upgrade of product
functions.
y
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
y
y
For an optimal connection, HDMI cables and USB devices
should have bezels less than 10 mm thick and 18 mm width.
Use an extension cable that supports USB 2.0 if the USB cable
or USB memory stick does not fit into your TV’s USB port.
y
This DivX Certified® device has passed rigorous testing to ensure it
plays DivX® video.
To play purchased DivX movies, first register your device at
vod.divx.com. Find your registration code in the DivX VOD section of
your device setup menu.
B
<
B
*A 10 mm
=
*B 18 mm
=
A
A
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
Use a certified cable with the HDMI logo attached. If you do
not use a certified HDMI cable, the screen may not display or a
connection error may occur.
y
y
DivX®, DivX Certified® and associated logos are trademarks of DivX,
LLC and are used under license.
Recommended HDMI cable types
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and
- High-Speed HDMI®/™cable
- High-Speed HDMI®/™cable with Ethernet
CAUTION
Open source software
notice information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please
Do not use any unapproved items to ensure the safety and
product life span.
Any damage or injuries caused by using unapproved items are
not covered by the warranty.
Some models have a thin film attached on to the screen and
this must not be removed.
y
y
y
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
on which you purchased the product.
3
Lifting and moving the TV
Setting up the TV
Please note the following advice to prevent the TV from being
scratched or damaged and for safe transportation regardless of its
type and size.
CAUTION
When attaching the stand to the TV set, place the screen facing
down on a cushioned table or flat surface to protect the screen
from scratches.
Do not carry the monitor upside-down by holding the stand
body (or stand base) as this may cause it to fall off, resulting in
damage or injury.
y
It is recommended to move the TV in the box or packing
material that the TV originally came in.
Before moving or lifting the TV, disconnect the power cord and
all cables.
y
y
y
y
When holding the TV, the screen should face away from you to
avoid damage.
NOTE
Remove the stand before installing the TV on a wall mount
by performing the stand attachment in reverse. (Only MT58*,
MT48T)
Lift up the latch at the bottom of the stand base and detach
the stand base from the TV. (Only MT48D*, MT48V*, MT48U)
y
y
Using the joystick button
You can simply operate the TV functions, pressing or moving the
joystick button up, down, left or right.
Hold the top and bottom of the TV frame firmly. Make sure not
to hold the transparent part, speaker, or speaker grill area.
y
Image shown may differ from your TV.
y
Joystick Button
When transporting the TV, do not expose the TV to jolts or
excessive vibration.
When transporting the TV, keep the TV upright, never turn the
TV on its side or tilt towards the left or right.
Do not apply excessive pressure to cause flexing /bending of
frame chassis as it may damage screen.
y
y
y
Remote control
sensor
Basic functions
When the TV is turned off, place
your finger on the joystick button
and press it once and release it.
CAUTION
Power On
Avoid touching the screen at all times, as this may result in
damage to the screen.
y
y
When the TV is turned on, place
your finger on the joystick button
and press it once for a few seconds
and release it. (However, if the
Menu button is on the screen,
pressing and holding the joystick
button will let you exit the Menu.)
When handling the TV, be careful not to damage the
protruding joystick button. (Depending on model)
Power Off
If you place your finger over the
joystick button and move it left or
right, you can adjust the volume
level you want.
Volume
Control
If you place your finger over the
Programmes joystick button and move it up or
Control
down, you can scrolls through the
saved programmes you want.
4
Adjusting the menu
Adjusting the angle of the TV to suit view
When the TV is turned on, press the joystick button one time. You
can adjust the Menu items moving the joystick button up, down, left
or right.
Image shown may differ from your TV.
y
(Only 22MT58*)
Tilt from -5° to 20° degrees up or down to adjust the angle of the TV
to suit your view.
Turns the power off.
-5° 20°
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Accesses the setting menu.
NOTE
If you press the joystick button first, you may not be able to adjust
the volume level and saved programmes.
y
y
Rear
Front
CAUTION
(Only 24/27MT58*)
Tilt from -2° to 15° degrees up or down to adjust the angle of the TV
When your finger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button.
to suit your view.
-2° 15°
Mounting on a table
Image shown may differ from your TV.
y
1 Lift and tilt the TV into its upright position on a table.
100 mm
-
Leave a
(minimum) space from the wall for proper
ventilation.
Rear
Front
CAUTION
100 mm
100 mm
When you adjust the angle, do not hold the buttom of the TV
frame as shown on the following illustration, as may injure
your fingers.
y
100 mm
100 mm
2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
CAUTION
Do not place the TV near or on sources of heat, as this may
result in fire or other damage.
Please be sure to connect the TV to the AC/DC power adapter
before connecting the TV’s power plug to a wall power outlet.
y
y
5
Using the kensington security system
Separate purchase
(Wall mounting bracket)
(This is not available for all models.)
Image shown may differ from your TV.
y
20MT48*
22MT58*
22MT48*
24MT58*
24MT48*
27MT58*
28MT48*
29MT48*
The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit
http://www.kensington.com. Connect the Kensington security system
cable between the TV and a table.
Model
Wall mount (A x B)
A
75 x 75
100 x 100
B
Standard screw
Number of screws
M4 x L10
4
Wall mount bracket
(optional)
RW120
CAUTION
Disconnect the power first, and then move or install the TV.
Otherwise electric shock may occur.
If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury.
Use an authorized LG wall mount and contact the local dealer
or qualified personnel.
Do not over tighten the screws as this may cause damage to
the TV and void your warranty.
Use the screws and wall mounts that meet the VESA standard.
Any damages or injuries by misuse or using an improper
accessory are not covered by the warranty.
Screw length from outer surface of back cover should be under
8 mm.
y
y
y
y
y
NOTE
The Kensington security system is optional. You can obtain
additional accessories from most electronics stores.
y
Mounting on a wall
For proper ventilation, allow a clearance of 100 mm on each side and
from the wall. Detailed installation instructions are available from
your dealer, see the optional Tilt Wall Mounting Bracket Installation
and Setup Guide.
y
Wall mount Pad
Wall mount Pad
Back Cover
100 mm
Standard screw
Back Cover
: M4 x L10
100 mm
100 mm
Max.8 mm
100 mm
NOTE
If you intend to mount the TV to a wall, attach Wall mounting
interface (optional parts) to the back of the TV.
Use the screws that are listed on the VESA standard screw
specifications.
The wall mount kit includes an installation manual and
necessary parts.
The wall mount bracket is optional. You can obtain additional
accessories from your local dealer.
The length of screws may differ depending on the wall mount.
Be sure to use the proper length.
y
y
y
y
y
When you install the TV using the wall mounting interface (optional
parts), attach it carefully so it will not drop.
1 If you use screw longer than standard, the TV might be damaged
internally.
2 If you use improper screw, the product might be damaged and
drop from mounted position. In this case, LG Electronics is not
responsible for it.
For more information, refer to the instructions supplied with
the wall mount.
6
CI module connection
Connections (notifications)
(Depending on model)
View the encrypted (pay) services in digital TV mode.
Connect various external devices to the TV and switch input modes
to select an external device. For more information about an external
device’s connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, camcorders or cameras, gaming
devices, and other external devices.
Check if the CI module is inserted into the PCMCIA card slot in
the right direction. If the module is not inserted properly, this
can cause damage to the TV and the PCMCIA card slot.
If the TV does not display any video and audio when CI+ CAM
is connected, please contact to the Terrestrial/Cable/Satellite
Service Operator.
y
y
NOTE
The external device connection may differ from the model.
Connect external devices to the TV regardless of the order of
the TV port.
y
y
Euro scart connection
If you record a TV programme on a DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a
DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
Refer to the external equipment’s manual for operating
instructions.
y
(Depending on model)
Transmits the video and audio signals from an external device to the
TV set. Connect the external device and the TV set with the euro scart
cable.
y
y
y
Output
Type
If you connect a gaming device to the TV, use the cable
supplied with the gaming device.
AV1
(TV Out1)
Current
input mode
In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present,
change the PC output to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on
the Picture menu until the picture is clear.
Digital TV
Analogue TV
AV, HDMI
Digital TV
Analogue TV
In PC mode, some resolution settings may not work properly
depending on the graphics card.
y
Component, RGB (Depending on model)
1 Outputs Analogue TV or Digital TV signals.
Antenna connection
NOTE
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
Any Euro scart cable used must be signal shielded.
y
Use a signal splitter to use more than 2 TVs.
If the image quality is poor, install a signal amplifier properly
to improve the image quality.
If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
An antenna cable and converter are not supplied.
Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
y
y
Other connections
y
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
y
y
USB port supports 0.5 A electric current. If you need more
electric current in case of HDD, use the separate power adaptor.
y
y
Satellite dish connection
NOTE
(Only satellite models)
Supported HDMI Audio format :
Connect the TV to a satellite dish to a satellite socket with a satellite
RF cable (75 Ω).
Dolby Digital (32 KHz, 44.1 KHz, 48 KHz),
PCM (32 KHz, 44.1 KHz, 48 KHz, 96 KHz, 192 KHz)
(Depending on model)
7
Connecting to a PC
Remote control
Image shown may differ from your TV.
y
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
Your TV supports the Plug and Play* feature and has the built-in
speakers with Virtual Surround that reproduces sound clearly with a
rich bass.
* Plug and Play: The function when a PC recognizes a connected device
that users connect to a PC and turn on, without device configuration
or user intervention.
CAUTION
Do not mix old and new batteries, as this may damage the
remote control.
The remote control will not be included for all sales market.
y
y
NOTE
If you want to use HDMI-PC mode, you must set the Input
Label to PC mode.
The OSD (On Screen Display) is displayed on the screen as
shown below.
y
y
Make sure to point the remote control toward the remote control
sensor on the TV.
» When turning the product on in HDMI input.
» When switching to HDMI input.
Is the input connected to your PC?
A
YES
NO
Do not show message again
If you select "YES" the size and image quality are optimised
for your PC.
If you select "NO" the size and image quality are optimised for
the AV device (DVD player, set-top box).
If you select "Do not show message again" this message
does not appear until the TV is reset. You can change the set
y
y
y
B
value in
(Home) Inputs Input Label.
The values set for HDMI1/HDMI2 are saved independently.
(Only MT58*)
y
A
(Power) Turns the TV on or off.
Selects Radio, TV and DTV programme.
Recalls your preferred subtitle in digital mode.
Turns the PIP mode on or off. (Depending on model)
By pressing the AD button, audio descriptions function will be
enabled.
Selects TV or PC mode.
(Inputs) Changes the input source.
B
Number buttons Enters numbers.
Accesses the saved programme list.
Returns to the previously viewed programme.
Adjusts the volume level.
Accesses your favourite programme list.
Shows programme guide.
Mutes all sounds.
Scrolls through the saved programmes.
Moves to the previous or next screen.
8
Settings
Automatically Setting Up Programme
C
(Settings) Programmes Auto Tuning
Automatically tunes the programmes.
If Input Source is not connected properly, programme
registration may not work.
Auto Tuning only finds programmes that are currently
broadcasting.
If Lock System is turned on, a pop-up window will appear
asking for password.
y
y
y
D
To select Picture Mode
(Settings) Picture Picture Mode Settings Picture
Mode
Select the picture mode optimized for the viewing environment or the
programme.
Vivid : Heightens contrast, brightness and sharpness to display
vivid images.
Standard : Displays images in standard levels of contrast,
brightness and sharpness.
Eco/APS: [Depending on model]
The Energy Saver feature changes settings on the TV to reduce
power consumption.
Cinema/Game : Displays the optimum picture for movie,
game.
Sports : [Depending on model]
Optimizes the video image for high and dynamic actions by
emphasizing primary colours such as white, grass, or sky blue.
Expert 1,2 : Menu for adjusting picture quality that
allows experts and amateurs to enjoy the best TV viewing.
This is the adjustment menu provided for ISF-certified picture
tuning professionals. (ISF logo can only be used on ISF-certified
TVs.)
ISFccc: Imaging Science Foundation Certified Calibration
Control
Depending on input signal, available range of picture modes
may differ.
Expert mode is for picture tuning professionals to
control and fine-tune using a specific image. For normal
images, the effects may not be dramatic.
The ISF function is only available on some models.
y
y
y
C
Teletext buttons
teletext.
(
)
These buttons are used for
(Home) Accesses the Home menu.
(Settings) Accesses the settings menu.
Accesses the Quick menus.
y
y
(Navigation buttons) Scrolls through menus or
options.
Selects menus or options and confirms your input.
Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
y
D
Views the information of the current programme and
screen.
Not functional.
(Control buttons) Controls media contents.
y
y
,
,
,
(Colour buttons) These access special
functions in some menus.
(Gaming mode) Turns the gaming mode on or off.
(Backlight) Adjusts the brightness of the screen by
controlling the screen backlight.
y
NOTE
On MHEG programme, you cannot adjust the backlight with
the yellow or blue key.
y
9
Fine-tuning Picture Mode
To set additional picture options
(Settings) Picture Picture Mode Settings
(Settings) Picture Picture Mode Settings
Picture Options
This feature allows you to adjust the selected picture mode in detail.
Adjusts detailed setting for images.
Backlight : Controls the level of screen brightness by adjusting
the backlight. The closer to 100, the brighter the screen.
Contrast : Adjusts the contrast of the bright and dark areas of
the picture. The closer to 100, the higher the contrast.
Brightness : Adjusts the overall screen brightness. The closer
to 100, the brighter the screen.
Sharpness : Adjusts the sharpness of the image. The closer to
50, the sharper and clearer the image.
Colour : Tones down or up the colours displayed on the screen.
The closer to 100, the deeper the colour.
Tint : Adjusts the colour balance between red and green
displayed on the screen. The closer to Red 50, the more red
the colour will be. The closer to Green 50, the more green the
colour will be.
Colour Temperature : Adjusts the colour temperature from
cold to warm.
y
y
y
y
y
y
Noise Reduction : Eliminates noise in the picture.
MPEG Noise Reduction : Eliminates noise generated while
creating digital picture signals.
y
y
Black Level : Adjusts the brightness and contrast of the
screen to suit the black level of the input picture by using the
blackness (black level) of the screen.
y
Real Cinema : Optimizes the screen for movie viewing.
Motion Eye Care : Automatically adjusts brightness and
reduces image blur based on image data to reduce eyestrain.
Depending on input signal or other picture settings, the range
of detailed items for adjustment may differ.
y
y
y
Resetting picture settings
y
y
(Settings) Picture Picture Mode Settings
Picture Reset
Depending on input signal or other picture settings, the range
of detailed items for adjustment may differ.
Resets picture settings that the user customizes. Each picture mode is
reset. Select the picture mode you wish to reset.
To set advanced control
To use Gaming Mode
(Settings) Picture Picture Mode Settings
Advanced Control / Expert Control
(Settings) Picture Gaming Mode
Calibrates the screen for each picture mode; or adjusts picture settings
for a special screen.
[Available only for RGB/HDMI-PC]
This mode allows you to optimize the picture quality for games.
Dynamic Contrast : Adjusts the contrast to the optimal level
according to the brightness of the image.
Dynamic Colour : Adjusts colours to make the image appear
in more natural colours.
Preferred Colour : Adjust the colours of skin, grass and sky to
your personal preferences.
Gamma : Sets the gradation curve according to the output of
picture signal in relation to the input signal.
Colour Gamut : Selects the range of colours that can be
expressed.
Edge Enhancer : Shows clearer and distinctive yet natural
edges of the video.
Colour Filter : Filters a specific colour spectrum in RGB colours
to fine-tune colour saturation and hue accurately.
White Balance : Adjusts the overall tone of the screen as
desired.
Colour Management System : This is a system that experts
use when they adjust colour with a test pattern. They can select
from six colour areas (Red / Green / Blue / Cyan / Magenta /
Yellow) without affecting other colours. For normal images,
adjustments may not result in noticeable colour changes.
Depending on input signal or other picture settings, the range
of detailed items for adjustment may differ.
y
y
y
y
y
y
y
y
y
DAS Mode : [Depending on model]
y
This mode minimizes the time taken to display the video signal
received from the input device to ensure faster gameplay.
(The screen will flicker when turning DAS Mode On or Off.)
- DAS : Dynamic Action Sync
Black Stabilizer : Objects can be seen more clearly on a dark
screen by adjusting the black levels. Increasing the Black
Stabilizer value brightens the low gray levels on the screen.
(You can easily distinguish objects on a dark game screen.)
Reducing the Black Stabilizer value darkens the low gray
levels and increases the dynamic contrast on the screen.
y
-
You can configure the detailed settings for Gaming Mode using
the key on the remote control.
-
-
You can set DAS Mode only when the frequency for vertical input
is 50 Hz/60 Hz.
When PIP is turned on, the DAS Mode is unavailable.
(Depending on model)
y
10
To use Energy Saving feature
To synchronize audio and video
(Settings) Picture
Energy Saving
(Settings) Sound AV Sync Adjustment
[Depending on model]
Reduces power consumption by adjusting screen brightness.
Synchronizes video and audio directly when they do not match. If you
set AV Sync Adjustment to On, you can adjust the sound output (TV
speakers) to the screen image.
Off : Turns off the Energy Saving mode.
Minimum / Medium / Maximum : Applies the pre-set
Energy Saving mode.
Screen Off : Screen is turned off and only sound is played.
Press any button except Power button on the remote control
to turn the screen back on.
y
y
If you select the Bypass, Outputs the broadcast signals or
the sound from external devices without any audio delay. The
audio may be output before the video because of the time the
TV takes to process the video input.
y
y
To use Eye Comfort Mode feature
PIP Setting
(Settings) Picture Eye Comfort Mode
(Settings) General PIP
If you turn this option on, colour temperature will be automatically
adjusted to reduce eye strain.
[Depending on model]
Mode : Shows or hides the sub-screen.
y
y
y
y
y
On : Automatically adjusts the screen color temperature.
Off : Turns off the Eye Comfort Mode.
y
y
Sub Input : Select the input on the sub-screen.
Position : Adjusts the position of the sub-screen.
Size : Adjusts the size of the sub-screen.
Sound : Switches to the main screen sound or the sub screen
sound.
Select Sound Mode
(Settings) Sound Sound Mode Settings
Sound Mode
The PIP function is only available in the following mode:
y
- Main : RGB-PC
- Main : HDMI
Sub : DTV / ATV / HDMI
Sub : DTV / ATV / Component
Adjusts TV audio to an optimal level based on a selected sound mode.
The PIP settings can also be set using Quick Menu.
Press the PIP button on the remote control to show or hide
the sub-screen.
y
y
Standard : Optimizes the sound for all types of content.
Clear Voice : Boosts voice clarity from the TV.
Music : [Depending on model] Optimizes the sound for music.
Cinema : Optimizes the sound for cinemas.
Sports : [Depending on model] Optimizes the sound for sports.
Game : Optimizes the sound for gameplay.
y
y
y
y
y
y
The PIP function is not available when SIMPLINK is activated.
y
Setting USB AutoRun
(Settings) General USB AutoRun
Adjusting audio balance
Play photos or videos of USB automatically when TV is turned on or
USB is connected.
(Settings) Sound Sound Mode Settings
Balance
Off : Turn off the USB AutoRun.
y
y
y
y
Adjust the volume of the left and right speakers.
Videos : Play videos of USB automatically.
Photos : Play photos of USB automatically.
Only plays the files in the top level folder of the USB device in
sequence.
Using the Sound Effect function
While playing, press the BACK or EXIT button on the remote
control to end this function.
If the files are invalid or corrupted, the following message
appears before returning to the previous input status: "This file
is invalid."
When the USB device is reconnected after being disconnected
during video playback, Continue watching starts automatically
and resumes the video from the last viewed scene (only
applies to the first video).
(Settings) Sound Sound Mode Settings
y
y
The user can select various sound effects.
Virtual Surround : Enjoy an immersive soundscape with the
virtual multi-channel surround sound effect.
Equalizer : Set the desired sound by adjusting the equalizer
directly.
Reset : Reset the sound effect settings.
This is only available if Sound Mode is set to Standard.
y
y
y
y
y
11
To use SIMPLINK
To specify Factory Reset
[Depending on model]
(Settings) General Reset to Initial Settings
SIMPLINK is a feature that enables you to control and manage various
multimedia devices conveniently via the SIMPLINK menu.
All stored information is deleted and TV settings are reset.
The TV turns itself off and back on, and all settings are reset.
1 Connect the TV’s HDMI IN terminal and the SIMPLINK device’s HDMI
output terminal using an HDMI cable.
When Lock System is in place, a pop-up window appears and
asks for password.
Do not turn off the power during initialization.
y
2 Select (Settings) General SIMPLINK.
SIMPLINK menu window appears.
y
3 In SIMPLINK Setting window, set SIMPLINK function to On.
4 Configure the Auto Power Sync settings to On or Off.
5 In SIMPLINK menu window, selects the device you want to control.
To remove the USB device
Select the connected USB HDD from
(Home) Inputs and
select the Eject button to disconnect the USB HDD storage device.
When you see a message that the USB device has been removed,
separate the device from the TV.
You can also set the SIMPLINK in
SIMPLINK.
This function is only compatible with devices with the
SIMPLINK logo.
To use the SIMPLINK function, you need to use a high-
speed HDMI® cable (with CEC (Consumer Electronics Control)
feature added). High-speed HDMI® cables have the No. 13 pin
connected for information exchange between devices.
If you switch to another input, the SIMPLINK device will stop.
If a third-party device with the HDMI-CEC function is also used,
the SIMPLINK device may not work normally.
(Home) Inputs
y
y
y
Once a USB device has been selected for removal, it can no
longer be read. Remove the USB storage device and then re-
connect it.
y
Using a USB storage device - warning
If the USB storage device has a built-in auto recognition
program or uses its own driver, it may not work.
Some USB storage devices may not work or may work
incorrectly.
Use only USB storage devices formatted with the Windows
FAT32 or NTFS File System.
For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 500 mA.
y
y
y
y
y
y
If you select or play media from a the device with a home
theatre function, the HT Speaker(Speaker) is automatically
connected.
y
SIMPLINK function description
It is recommended that you use USB memory sticks of 32 GB or
less and USB HDDs of 2 TB or less.
If a USB HDD with power-saving function does not work
properly, turn the power off and on. For more information,
refer to the user manual of the USB HDD.
Data in the USB storage device can be damaged, so be sure to
back up important files to other devices. Data maintenance
is the user’s responsibility and the manufacturer is not
responsible for data loss.
y
y
Direct Play : Plays the multimedia device on the TV instantly.
Controlling devices with the TV remote control : Manages
the multimedia device with the TV remote control.
Main Power Off : If Auto Power Sync is set to On in the
SIMPLINK settings and turn off your TV, the devices connected
to your TV via SIMPLINK will also be turned off.
Main Power On : If Auto Power Sync is set to On in the
SIMPLINK settings, turning on a SIMPLINK-linked device will
turn the TV on. (Behavior may vary depending on connected
device.)
y
y
y
y
y
My Media supporting file
To set password
Maximum data transfer rate : 20 Mbps (Mega bit per second)
External supported subtitle formats : *.srt (SubRip), *.smi
(SAMI), *.sub (SubViewer, MicroDVD, DVDsubtitleSystem,
SubIdx(Vobsub)), *.ass/*.ssa (SubStation Alpha), *.txt
(TMplayer), *.psb (PowerDivX)
y
y
(Settings) Safety Set Password
Sets or changes the TV password.
The initial password is set to ‘0000’.
When France is selected for Country, password is not ‘0000’but
y
y
Internal supported subtitle formats: *.dat/*.mpg/*.mpeg/
*.vob (DVD Subtitle), *.ts/*.tp/*.m2ts (DVB Subtitle),
*.mp4 (DVD Subtitle, UTF-8 Plain Text),
y
‘1234’.
When France is selected for Country, password cannot be set to
‘0000’.
y
*.mkv (ASS, SSA, UTF-8 Plain Text, Universal Subtitle Format,
VobSub, DVD Subtitle), *.divx/*.avi (XSUB1, XSUB+)
1 XSUB : Supports internal subtitles generated from DivX6
12
File Type : WMA
y
y
Supported Video Formats
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard
File Type : WMA10 Pro
Maximum : 1920 x 1080 @ 30p (Only Motion JPEG 640 x 480 @
y
30p)
.asf, .wmv
y
[Video] MPEG-4 Part2, XViD, H.264/AVC, VC1(WMV3, WVC1),
MP43
[Audio] WMA Standard, WMA9(Pro), MP3, AAC, AC3
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0 : up to 2 Channel @ 48 kHz
(Except LBR mode),
M1 : up to 5.1 Channel @ 48 kHz,
M2 : up to 5.1 Channel @ 96 kHz
[Support] WMA10 Pro
File Type : OGG
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] OGG Vorbis
File Type : WAV
divx, .avi
y
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XViD, H.264/AVC
[Audio] HE-AAC, LPCM, ADPCM, MPEG- 1 Layer I, MPEG-1 Layer
II, Dolby Digital, MPEG-1 Layer III (MP3)
.ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, H.265/HEVC
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, MPEG-1 Layer III
(MP3), Dolby Digital, Dolby Digital Plus, AAC, HE-AAC
.vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, MPEG- 1 Layer II,
DVD-LPCM
y
y
y
y
y
[Bit rate] 64 kbps ~ 1.5 Mbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] LPCM
[Bitdepth] 8 bit / 16 bit / 24 bit
.mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, XViD,
H.264/AVC
[Audio] AAC, MPEG-1 Layer III (MP3)
.mkv
Supported Photo Formats
Category : 2D (jpeg, jpg, jpe)
[Available file type]
y
y
y
y
y
y
y
SOF0: Baseline,
SOF1 : Extend Sequential,
SOF2 : Progressive
[Photo size]
[Video] MPEG-2, MPEG-4 Part2, XViD, H.264/AVC
[Audio] HE-AAC, Dolby Digital, MPEG-1 Layer III (MP3), LPCM
motion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM
.mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, Dolby Digital, LPCM
dat
[Video] MPEG-1, MPEG-2
[Audio] MP2
flv
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC
3gp, 3gp2
Minimum : 64 x 64,
Maximum (Normal Type) : 15360 (W) x 8640 (H),
Maximum (Progressive Type) : 1920 (W) x 1440 (H)
Category : BMP
[Photo size] Minimum : 64 x 64, Maximum : 9600 x 6400
Category : PNG
[Available file type] Interlace, Non-Interlace
[Photo size]
Minimum : 64 x 64,
y
y
Maximum (Interlace) : 1200 x 800,
Maximum (Non-Interlace) : 9600 x 6400
BMP and PNG format files may be slower to display than JPEG.
y
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB)
To see web manual
Supported Audio Formats
File type : mp3
y
y
y
[Bit rate] 32 Kbps ~ 320 Kbps
[Sample freq.] 16 kHz ~ 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3
File Type : AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS
File Type : M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4
13
Maintenance
Troubleshooting
Cannot control the TV with the remote control.
Cleaning your TV
Check the remote control sensor on the product and try again.
Check if there is any obstacle between the product and the
remote control.
y
y
Clean your TV regularly to keep the best performance and to extend
the product lifespan.
Make sure to turn the power off and disconnect the power cord
and all other cables first.
y
Check if the batteries are still working and properly installed
y
(
to
,
to ).
When the TV is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent
possible damage from lightning or power surges.
y
No image display and no sound is produced.
Check if the product is turned on.
y
y
y
Check if the power cord is connected to a wall outlet.
Check if there is a problem in the wall outlet by connecting
other products.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
The TV turns off suddenly.
Check the power control settings. The power supply may be
interrupted.
Check if the Auto Power Off (Depending on model) /
Sleep Timer / Timer Power Off feature is activated in the
Timers settings.
y
To remove major dirt, wipe the surface with a soft cloth dampened in
clean water or a diluted mild detergent. Then wipe immediately with
a dry cloth.
y
Avoid touching the screen at all times, as this may result in
damage to the screen.
y
If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
y
Do not push, rub, or hit the screen surface with your fingernail
or a sharp object, as this may result in scratches and image
distortions.
y
When connecting to the PC (HDMI/RGB), 'No Signal', 'Check signal
cable' or ‘Unsupported Format’is displayed.
Do not use any chemicals as this may damage the product.
Do not spray liquid onto the surface. If water enters the TV, it
may result in fire, electric shock, or malfunction.
y
y
Turn the TV off/on using the remote control.
Reconnect the HDMI/RGB cable.
Restart the PC with the TV on.
y
y
y
Power cord
If TV is turned off automatically.
Remove the accumulated dust or dirt on the power cord regularly.
If Timer Power On is enabled, the TV will be turned on at the
specified time. If you do not operate the TV for two hours, the
TV will be turned off automatically.
To disable this function, use your remote control to go to
(Settings) Timers Timer Power On
2 Hours Auto Power Off Off.
y
Preventing “Image burn” or “Burn-in” on
your TV screen
y
If a fixed image displays on the TV screen for a long period
of time, it will be imprinted and become a permanent
disfigurement on the screen. This is “image burn”or “burn-in”
and not covered by the warranty.
y
If the aspect ratio of the TV is set to 4:3 for a long period of
time, image burn may occur on the letterboxed area of the
screen.
Avoid displaying a fixed image on the TV screen for a long
period of time (2 or more hours for LCD) to prevent image
burn.
y
y
14
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions.
Power
Dimensions (W x H x D) (mm)
Weight (kg)
consumption
(Outgoing
condition)
Power
requirement
Models
With stand
Without stand
With stand Without stand
20MT48DF
20MT48VF
467.0 x 330.5 x 146.3
507.6 x 410.5 x 198.2
554.9 x 422.9 x 203.5
642.0 x 473.7 x 203.5
507.6 x 358.0 x 146.3
467.0 x 278.0 x 52.7
507.6 x 316.5 x 75.5
554.9 x 342.3 x 92.8
642.0 x 393.5 x 93.0
507.6 x 316.5 x 52.7
2.4
3.1
3.6
5.0
3.0
2.2
2.8
3.2
4.6
2.9
22 W
26 W
28 W
32 W
26 W
19 V
19 V
19 V
19 V
19 V
1.2 A
1.6 A
2.0 A
2.0 A
1.6 A
22MT58DF
22MT58VF
24MT58DF
24MT58VF
27MT58DF
27MT58VF
22MT48DF
22MT48VF
24MT48DF
24MT48VF
24MT48U
24MT48DW
24MT48DG
24MT48VW
556 x 387.3 x 146.3
556 x 345.2 x 53.1
3.4
3.2
28 W
19 V
1.6 A
28MT48DF 641.5 x 435.5 x 186.1
641.5 x 396.3 x 57.5
641.5 x 396.3 x 57.5
4.7
4.7
4.5
4.5
28 W
33 W
19 V
19 V
1.6 A
2.0 A
28MT48VF
28MT48U 641.5 x 435.5 x 186.1
28MT48VW
29MT48DF
665.8 x 444.5 x 186.1
29MT48VF
665.8 x 405.5 x 61.4
665.8 x 405.5 x 61.4
4.8
4.7
4.6
4.5
33 W
33 W
19 V
19 V
2.0 A
2.0 A
29MT48T
665.8 x 435 x 175
24MT58* / 27MT58* / 29MT48*
/ 28MT48V*/ 28MT48U
22MT58* / 22MT48* / 24MT48*
/ 28MT48D*
20MT48*
Manufacturer : Lien Chang
Model : LCAP26-E, LCAP21
Manufacturer : Honor
Manufacturer : Lien Chang
Model : LCAP16B-E, LCAP21C
Manufacturer : Honor
Manufacturer : Lien Chang
Model : LCAP16A-E, LCAP21A
Manufacturer : Honor
AC/DC Adapter
Model : ADS-40FSG-19 19025GPG-1, Model : ADS-45FSN-19 19040GPG,
Model : ADS-40FSG-19 19032GPG,
ADS-40SG-19-3 19032G
ADS-40SG-19-3 19025G
ADS-45SN-19-3 19040G
In : AC 100 – 240 V ~ 50/60 Hz
In : AC 100 – 240 V ~ 50/60 Hz
In : AC 100 – 240 V ~ 50/60 Hz
Out : DC 19 V
CI module Size (W x H x D)
Operating Temperature
1.3 A
Out : DC 19 V
2.1 A
Out : DC 19 V
1.7 A
100.0 mm x 55.0 mm x 5.0 mm
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
Operating Humidity
Storage Temperature
Storage Humidity
Environment
condition
15
(Depending on country)
Digital TV
Terrestrial
Analogue TV
Satellite
Cable
Terrestrial / Cable
DVB-T
DVB-T2*
PAL/SECAM B/G, D/K, I,
SECAM L
Television system
DVB-S/S2*
DVB-C
VHF III : 174 ~ 230 Mhz
UHF IV : 470 ~ 606 Mhz
UHF V : 606 ~ 862 Mhz
Channel coverage
(Band)
950 ~ 2150 Mhz
6000
46 ~ 862 Mhz
2000
46 ~ 862 Mhz
S Band II : 230 ~ 300 Mhz
S Band III : 300 ~ 470 Mhz
Maximum number of
storable programmes
External antenna impedance
75 Ω
* Only DVB-T2/C/S2 support models.
16
HDMI (PC) supported mode
RGB (PC) / HDMI (PC) supported mode
(Only 22MT48*)
(Only MT58*)
Horizontal
Resolution
Vertical
frequency(Hz)
Horizontal
frequency(kHz)
Vertical
frequency(Hz)
Resolution
720 x 400
640 x 480
frequency(kHz)
720 x 400
640 x 480
31.468
31.469
37.500
37.879
46.875
48.363
56.476
60.023
67.500
70.080
59.940
75.000
60.317
75.000
60.004
70.069
75.029
75.000
31.468
31.469
37.500
37.879
46.875
48.363
70.080
59.940
75.000
60.317
75.000
60.004
800 x 600
800 x 600
1024 x 768
1024 x 768
(Only HDMI(PC))
1024 x 768
1024 x 768
56.476
70.069
1152 x 864
1280 x 720
1280 x 800
60.023
67.500
45.000
75.029
75.000
60.000
45.000
60.000
1152 x 864
1280 x 720
1280 x 800
49.702
63.981
79.976
65.317
59.810
60.020
75.025
59.978
49.702
63.981
79.976
65.317
59.810
60.020
75.025
59.978
1280 x 1024
1280 x 1024
1400 x 1050
1440 x 900
1600 x 900
55.935
60.000
59.887
60.000
1400 x 1050
1440 x 900
1600 x 900
55.935
60.000
59.887
60.000
64.674
65.290
59.883
59.954
1680 x 1050
1920 x 1080
64.674
65.290
59.883
59.954
1680 x 1050
67.500
60.000
1920 x 1080
(Only RGB (PC))
1920 x 1080
66.590
67.500
59.930
60.000
(Only 20/24/28/29MT48*)
Horizontal
frequency(kHz)
Vertical
frequency(Hz)
Resolution
720 x 400
640 x 480
(Only HDMI(PC))
31.468
31.469
37.500
37.879
46.875
48.363
60.023
49.702
70.080
59.940
75.000
60.317
75.000
60.004
75.029
59.810
NOTE
The optimal display resolution is 1920 x 1080 @ 60 Hz.
The optimal timing in each mode is vertical frequency 60 Hz.
y
y
800 x 600
1024 x 768
1280 x 800
1366 x 768
47.717
59.790
NOTE
The optimal display resolution
- 22MT48*: 1920 x 1080 @ 60 Hz.
- 20/24/28/29MT48*: 1366 x 768 @ 60 Hz.
y
y
The optimal timing in each mode is vertical frequency 60 Hz.
17
Component port connecting information
HDMI (DTV) supported mode
(Only MT58*)
Horizontal
Resolution
Vertical
frequency(Hz)
frequency(kHz)
Component ports on the TV
Y
P
P
P
P
B
R
31.469
59.940
60.000
50.000
720 x 480
31.500
Y
Y
Y
Y
B
R
31.250
720 x 576
B-Y
Cb
R-Y
Cr
Video output ports
on DVD player
37.500
44.960
45.000
33.720
33.750
28.125
27.000
33.750
56.250
67.430
67.500
50.000
59.940
60.000
59.940
60.000
50.000
24.000
30.000
50.000
59.940
60.000
1280 x 720
Pb
Pr
1920 x 1080
Component supported mode
(Only MT58*)
Horizontal
Resolution
Vertical
frequency(Hz)
frequency(kHz)
15.730
59.940
15.750
31.470
60.000
59.940
720 x 480
31.500
60.000
50.000
50.000
59.940
60.000
50.000
59.940
60.000
50.000
50.000
59.940
60.000
15.625
720 x 576
31.250
44.960
1280 x 720
45.000
37.500
33.720
33.750
28.125
56.250
67.432
67.500
1920 x 1080
NOTE
The optimal display resolution
- MT58*, 22MT48*: 1920 x 1080 @ 60 Hz.
- 20/24/28/29MT48*: 1366 x 768 @ 60 Hz.
y
y
The optimal timing in each mode is vertical frequency 60 Hz.
18
WARNING!
Never place a television set in an unstable location. A television set
may fall, causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple precautions
such as:
Using cabinets or stands recommended by the manufacturer
of the television set.
y
Only using furniture that can safely support the television set.
Ensuring the television set is not overhanging the edge of the
supporting furniture.
y
y
Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture
and the television set to a suitable support.
Not placing the television set on cloth or other materials that
may be located between the television set and supporting
furniture.
y
y
y
Educating children about the dangers of climbing on furniture
to reach the television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON”(power).
Refers to dangerous voltage.
19
Make sure to read the Safety Precautions
before using the product.
Keep the Owner’s Manual (CD) in an
accessible place for future reference.
The model and serial number of the TV is
located on the back and one side of the
TV. Record it below should you ever need
service.
MODEL
SERIAL
|