HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 1
Model: LHT854
Full HD up-scaling
(1080p)
5.1ch ez Set-up
View Full HD picture quality Listen sound from TV, DVD
Unique Features
with simple setup.
and Digital Device with vivid
5.1ch mode.
Go to page 12
Go to page 18
Portable In
Made for iPod
Listen to music from your
portable device (MP3,
Notebook, etc).
Enjoy music from iPod with
simple connection.
Go to page 17
Go to page 19
For service/
support Call:
Toll Free Number
1-800-243-0000
© Copyright 2008, LG Electronics U.S.A., Inc.
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 3
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.
AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards
incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SER-
VICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and operating instructions
should be read before the product is operated.
2. Keep these instructions. - The safety, operating and use instructions
should be retained for future reference.
3. Heed all warnings. - All warnings on the product and in the operating
instructions should be adhered to.
4. Follow all instructions. - All operating and use instructions should be
followed.
10. Protect the power cord from being walked on or pinched particu-
larly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
5. Do not use this apparatus near water. - For example: near a bath
tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a
swimming pool; and other areas located near water.
6. Clean only with dry cloth. - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions. - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of the product
and to protect it from over-heating. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar sur-
face. This product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or the manu-
facturer’s instructions have been adhered to.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
3
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 4
Welcome to your new DVD Receiver
Contents
What is SIMPLINK?
Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . .7-8
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
OSD Initial language settings . . . . . . . . . . . . . . . . . . .11
Initial Setting the Area Code . . . . . . . . . . . . . . . . . . . .11
Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . .11-13
Setting the sound mode . . . . . . . . . . . . . . . . . . . . . . .13
Displaying Disc Information . . . . . . . . . . . . . . . . . . . .14
Playing a disc or file . . . . . . . . . . . . . . . . . . . . . . .14-16
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . .17
Listening to music from your portable player . . . . . . .17
Listening to music from your USB device . . . . . . . . .18
5.1ch ez Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Listening to music from your iPod . . . . . . . . . . . . . . .19
Controlling your TV with the supplied Remote Control20
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . .23
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Some functions of this unit are controlled by TV’s remote control when this unit and
LG TV with SIMPLINK are connected through HDMI connection.
•
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop,
Power Off, etc.
•
•
•
Refer to the TV owner’s manual for the details of SIMPLINK function.
LG TV with SIMPLINK function has the logo as shown above.
Use a higher version cable than 1.2A HDMI cable.
4
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 5
Setting up
c
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
Attaching the speakers to the DVD receiver
the colour coding:
a
You will have received six speaker cables.
Each one is colour-coded by a band near each end and wires one of the
six speakers to the DVD receiver.
COLOUR SPEAKER
POSITION
b
Connect the wires to the DVD receiver.
Grey
Rear
Behind you and to your right.
Match each wire’s coloured band to the same coloured connection termi-
nal on the reverse of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
Blue
Rear
Behind you and to your left.
Green
Orange
Red
Centre
Sub Woofer
Front
Above screen, directly in front of you.
In front of you, to the right of
the screen.
White
Front
In front of you, to the left of
the screen.
Connect the red end of each wire to the
terminals marked +(plus) and the black
end to the terminals marked - (minus).
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
Be careful of the following
Be careful to make sure children not to put their hands or any objects into the
*speaker duct.
*Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure).
5
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 6
Setting up
Speaker Positioning
In the case of normal position use the 6 speak-
ers (2 front speakers, centre speaker, 2 rear
speakers and subwoofer).
Front speaker
(Left)
Rear
speaker
(Left)
Front speakers
According to your listening position set up the speak-
ers for equal distance. And by hearing position set up
the interval between speakers to 45 degree.
Rear
speaker
(Right)
Centre speaker
The centre speakers and front speakers are ideally
the same height. But normally place it above or below
the television.
Subwoofer
Rear speakers
Center speaker
Place left and right behind the listening area. These
speakers recreate sound motion and atmosphere
required for surround sound playback. For best
results, do not install the rear speakers too far behind
the listening position and install them at or above the
level of the listener’s ears. It is also effective to direct
the rear speakers towards a wall or ceiling to further
disperse the sound.
In the case of a smaller room size, if the audience is
near to the rear wall set the rear speakers opposite
each other, and set the rear speakers above 60 - 90
cm than the listener’s ears.
Front speaker
(Right)
Subwoofer
This can be placed in any front position.
6
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 7
Hooking up the unit
a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Audio In connection
Video Out connection
The unit Audio jacks are
color coded (red for right
audio and white for left
audio). If your TV has only
one input for audio (mono),
connect it to the left (white)
audio jack on the unit.
Connect the VIDEO OUT-
PUT jack on the unit to the
corresponding input jacks on
your TV using a Video cable.
AM/FM connection
AM - Connect the AM loop
aerial to the DVD receiver.
FM - Connect the FM aerial.
The reception will be its best
when the two loose ends of
the aerial are in a straight and
horizontal line.
Component Video connection
Connect the COMPO-
NENT/PROGRESSIVE
SCAN OUTPUT jacks on the
unit to the corresponding
input jacks on your TV using
a Y PB PR cable.
b Plug the power cord into the power source.
7
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 8
Hooking up the unit
Hooking up the unit - more you
can do
Resolution Setting
You can change the resolution for component video
and HDMI output.
To change the resolution using setup menu to select
the desired resolution - Auto, 480i, 480p, 720p, 1080i,
1080p.
Available resolution according to connection
[HDMI OUT]: Auto, 1080p, 1080i, 720p and 480p (or
576p)
[COMPONENT VIDEO OUT]: 480p and 480i
[VIDEO OUT]: 480i
Notes on HDMI Out connection
•
If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read owner’s manual for TV, and then set
the resolution that your TV can accept.
Use the HDMI cable within 5 meters
If the volume bar is not displayed on TV screen,
restart the unit
HDMI Out connection
•
•
Connect the HDMI OUTPUT jack
on the unit to the HDMI input jack
on a HDMI compatible TV using an
HDMI cable.
Enjoying audio form an external source
You can enjoy audio form an external source through
your unit.
Press INPUT repeatedly to select the desired input
source. - AUX, AUX OPT, PORTABLE, USB, OSD
IPOD, IPOD
Digital Audio in connection
Connect the unit’s OPTICAL
IN jack to jack on optical out
of your TV (or Digital Device
etc.)
8
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 9
Remote control
ENTER : Acknowledges menu selection.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
PRESET(-/+): Selects programme of Radio.
TUN.(-/+): Tunes in the desired radio station.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ e ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
EQ : You can choose 6 (or 7) fixed sound impressions.
VSM : Press VSM to set the Dolby Pro Logic II or VIRTU-
AL sound.
INPUT : Changes the input source
PORTABLE, USB, OSD IPOD, IPOD
SLEEP : Sets the System to turn off automatically at a
specified time. (Dimmer : Dims the LED (Light-emitting
diode) of front panel by half in power-on status.)
(
AUX, AUX OPT,
)
a
b
c
POWER: Switches the unit ON or OFF.
FUNCTION : Selects the function (DVD/CD FM, AM)
,
TVtHT SPK (5.1Ch Ez Set-Up ): Press HT SPK to select
the AUX OPT directly
MUTE : Press MUTE to mute your unit. You can mute your
unit in order, for example, to answer the telephone.
TITLE : If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may
appear.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
VOLUME (+/-) : Adjusts speaker volume.
0-9 numerical buttons: Selects numbered options in a
STOP (x): Stops playback.
PLAY (B): Starts playback. Mono/Stereo(St.)
PAUSE/STEP (X): Pause playback.
menu.
Put the batteries into the remote control
SCAN(bb/BB) : Search backward or forward.
SKIP(. / >): Go to next or previous chapter/ track.
REPEAT: Repeats a Chapter/ Track/ Title/ all.
d
Make sure that the + (plus) and – (minus) on the batter-
ies match those on the remote control.
S-TITLE: During playback ,S - TITLE repeatedly to select a
desired subtitle language .
REPEAT A-B : Repeats sequence.
PROG./MEMO. : Accesses or removes Program menu.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
TV Control buttons : Controls the TV. See the page 20.
AUDIO : Selects an audio language (DVD) or an audio
channel (CD).
e
: This button is not available
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
RETURN (O): Press to move back wards in the menu.
SETUP : Accesses or removes setup menu
MENU : Accesses the menu on a DVD disc.
DISPLAY: Accesses On-Screen Display.
CLEAR: Removes a track number on the Program List.
b / B / v / V (left/right/up/down):Used to navigate on-
screen displays.
9
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 10
Main Unit
Open/Close
Func., Play
Press and hold down this button for
about 3 seconds then press repeat-
edly to select other function.
DVD/CD Disc Drawer
PORT. IN port
The PORT. In port means you can connect
a audio device to play trough the surround
sound speakers.
Pause,
Mono/Stereo(St.)
Stop
Power
Turn the unit
on and off.
Tuning (-/+)
Skip Search
USB port
Volume
Control the volume when using any function.
The USB port allows you can connect a
memory device to your DVD player.
10
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 11
Adjust the settings
OSD Initial language settings
Before using the unit for the first time, you have to adjust OSD initial
language
ON REMOTE
1 Display setup menu :
SETUP
v V
ON REMOTE
2 Select a desired option on the first level:
3 Move to second level:
1 Turn the power on:
B
Appear the language list display window
2 Select the language:
3 Press:
POWER
4 Select a desired option on the second level: v V
vV b B
5 Move to third level:
6 Change the setting:
B
ENTER
v V, ENTER
4 To confirm press:
b B and ENTER
Adjust the settings - more you can do
Initial Setting the Area Code
Adjust the language settings
After factory setting ,To set the Area code you have to as below.
OSD – Select a language for the Setup menu and on-screen display.
There is displayed as “-” or other error mark on display when you
change OSD.
ON REMOTE
1 Display setup menu:
SETUP
- Restart the unit
- Change function
- Disconnect and connect USB device.
2 Select LOCK menu on the first level:
v V
3 Move to second level:
Appears the activated Area code on the
second level.:
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in
the reference chapter (see page 21). If you make a mistake before pressing
ENTER, press CLEAR
B
B
4 Move to thirdlevel:
5 Enter the new pass word:
numerical buttons
(0-9) and ENTER
[OFF] (for Disc Subtitle): Turn off Subtitle.
6 Recheck entered new pass word:
numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area:
After select,Rating and Passward will be
activated.(page 21)
vV b B
8 To confirm press:
ENTER
11
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 12
Adjust the display settings
5.1 Speaker Setup
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
ON REMOTE
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
1 Open the settings menu:
2 Scroll to the audio icon:
SETUP
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
vV
3 Scroll right to enter the audio menu, then
select 5.1 Speaker Setup:
B v V ENTER
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
4 Highlight the speaker you want to adjust:
b B
Video Resolution - Use vV to select the desired resolution then press ENTER
to confirm your selection.
You can set 1080p video resolution to enjoy Full HD picture quality.
(Full HD up-scaling)
The number in 480p, 720p, 1080p and 1080i indicates the number of lines of
video. The “i” and “p” indicate interlaced and progressive scan, respectively.
[Auto] If your HDMI jack is connected to TVs providing display information
(EDID), automatically selects the resolution best suited to the connected TV
(1080p, 1080i, 720p or 480p). (only for HDMI connection)
[1080p] Outputs 1080 lines of progressive video. (only for HDMI connection)
[1080i] Outputs 1080 lines of interlaced video.(only for HDMI connection)
[720p] Outputs 720 lines of progressive video.(only for HDMI connection)
[480p] Outputs 480 lines of progressive video.
5 Move between the options and change
the settings:
v V b B
6 Set the output level (volume) of a speaker:
Anywhere between -5dB and +5dB.
Size : Since the speaker setting are
fixed, you cannot change the setting.
[480i] Outputs 480 lines of interlaced video.
Notes on Video Resolution
• Only resolutions supported by the TV are available.
b B
7 Set the distance each Speaker is away
from your set watching position.
This ensures that all sound reaches you
perfectly synchronised. You cannot adjust the
front or subwoofer speakers.
• Depending on your TV, certain HDMI output resolutions may not work.
• If your TV does not accept your resolution setting, an abnormal picture
appears on the screen. Please read TV’s owner’s manual then set the resolu-
tion that your TV can accept.
• If the HDMI jack is connected for TVs providing display information (EDID),
you can not select resolutions that the TV does not accept.
• If the picture does not appear on the screen, change the TV’s input source.
• If you turn off the TV or disconnect the HDMI cable during playback of the
device, playback will pause. You have to click on the play button to play back
again. For some TVs, when you change the TV mode, such condition speci-
fied above may happen.
b B
8 Test the signals of each speaker:
Adjust the volume to your taste
according to these signals.
b B
9 Save your settings and exit the Setup
menu:
ENTER
12
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 13
Adjust the audio settings
Setting the sound mode
VSM (VIRTUAL SOUND MATRIX) and Dolby Pro Logic II
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
You can select the Dolby Pro Logic II or Virtual sound. Press VSM to set the
virtual sound or to change sound mode repeatedly.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function
is effective for multi-channel karaoke DVDs only.
[BYPASS] mode : Software with multichannel surround audio signals is played
according to the way it was recorded.
HD AV Sync - Sometimes Digital TV encounters a delay between picture and
sound. If this happens you can compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use vV
to scroll up and down through the delay amount, which you can set at anything
between 0 and 300m sec.
2Ch source
[PL II MOVIE] mode: The Movie mode is for use with stereo television shows
and all programs encoded in Dolby Surround. The result is enhanced sound
field directionality that approaches the quality of discrete 5.1-channel sound.
[PL II MUSIC] mode: The Music mode is for use with any stereo music
recordings.
[PL II MATRIX] mode: The Matrix mode is the same as the Music mode
except that the directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem “larger.” The Matrix mode may
also find use in auto systems, where the fluctuations from poor FM stereo
reception can otherwise cause disturbing surround signals from a logic
decoder. The ultimate “cure” for poor FM stereo reception may be simply to
force the audio to mono.
The delay will vary depending on which digital TV channel you are on. If you
change channel you may need to readjust the HD AV Sync.
Adjust the lock settings
To access the lock options, you must enter the 4-digit password. If you have
not yet entered a password you are prompted to do so. Enter a 4-digit pass-
word. Enter it again to verify. If you make a mistake while entering number,
press CLEAR to delete numbers.
If you forget your password you can reset it. Press SETUP to display the Setup
menu. Input ‘210499’ and press ENTER. The password has now been cleared.
[ON STAGE] mode: Simulates a large Concert hall
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[VIRTUAL] mode: Realtime 3D positioned sound rendering technology
with stereo sources, optimized for stereo speakers. Listeners may expe-
rience amazing virtual surround effects with their own multimedia play-
ers.
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
5.1Ch source
[Change]: Enter the new password twice after entering the current password.
[VIRTUAL] mode: The Multichannel sound changes the sound in 5.1 ch
into a virtual one in the 10.1 ch so that it provides such a feeling that
you listen to the sound simultaneously from the right and left speakers
and center speaker.
Area code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by
the parental lock. See the Area Codes on page 21.
Adjust the others settings
Set a pre-programmed sound field
DivX(R) Registration – We provide you with the DivX® VOD (Video On
Demand) registration code that allows you to rent and purchase videos using
the DivX® VOD service.
Press ENTER when [Select] icon is highlighted and you can view the registra-
tion code of the unit.
This system has a number of pre-set surround sound fields. Select the one
which best suits the programme you are watching by pressing EQ repeatedly to
cycle through the options: NORMAL, NATURAL, AUTO EQ, POP, CLASSIC,
ROCK, JAZZ
[AUTO EQ]: AUTO EQ operates only in the MP3/ WMA files which include
the information. (ID3 Tag is operated ver.1 only.) WMA file operates to Normal
EQ regardless of Tag information.
13
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 14
Displaying Disc Information
Playing a Disc or file
ON REMOTE
ON REMOTE
1 Open the disc tray: (On unit: Z)
2 Insert a Disc: (On unit)
-
-
-
1 Press DISPLAY:
DISPLAY
v V
2 Select a item:
3 Close the disc tray: (On unit: Z)
3 Adjust the Display menu settings:
4 To return the exit:
b B
4 Adjust the menu settings:
or Select a file from the menu:
vV b B
v V
DISPLAY
5 Start the Disc playing:
B
PLAY
STOP
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by
6 To stop the Disc playing:
x
pressing b B.
Playing a Disc or file - more you can do
1/6
Current title (or track)
number/total number of titles (or tracks)
Current chapter number/total number of chapters
DVD
Playing a DVD that has a menu
4/26
Most DVD now have menus which load first before the film begins to play. You
can navigate these menus using vV b B to highlight an option.
Press ENTER to select.
Elapsed playing time
Selected audio language or channel
1
ENG
D
3/2.1CH
1
KOR
1/3
Selected subtitle
Selected angle/total number of angles
ALL
Skip to the next/previous chapter/track
Press SKIP (>) to move to the next chapter/track.
Press SKIP (.) to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the previous chapter/track.
Selected sound mode
Symbol Used in this Manual
ALL
Pause playback
ALL
MP3
WMA
ACD
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue play-
back.
All discs and file listed below
DVD and finalized DVD R/RW
DivX files
MP3 files
DVD
DivX
WMA files
Audio CDs
DVD
Frame-by-Frame playback
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.
ALL
Playing repeatedly
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter or track will be played back repeatedly. To return to normal playback,
press REPEAT repeatedly to select [OFF].
14
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 15
ALL
Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG
Fast forward or fast reverse
When playing a disc or USB Flash Drive containing with DivX, MP3/WMA and
JPEG files together, you can select which menu of files you would like to play
by pressing TITLE
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (m or M) repeated-
ly. Press PLAY (B) to continue play at normal speed.
®
DVD
DivX
Selecting a subtitle language
DivX
Changing the character set to display DivX subtitle correctly
During playback, press S-TITLE ( ) repeatedly to select a desired subtitle lan-
guage.
If the subtitle does not display properly during playback, press and hold S-
TITLE for about 3 seconds then press S-TITLE to select another language code
until the subtitle is displayed properly
DVD
Slow down the playing speed
DivX
DivX file requirement
While playback is paused, press SCAN (bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal
speed.
DivX disc compatibility with this player is limited as follows:
Available resolution size: 800x600 (W x H) pixel
The file name of the DivX subtitle is available by 45 characters.
If there is impossible code to express in the DivX file, it may be displayed as
" _ " mark on the display.
•
•
•
DVD
ACD
MP3
WMA
Watch and listen 1.5 times faster
Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5
times faster than normal playback speed. B x1.5 will appear in the top right cor-
ner of the screen. Press PLAY again to return to normal playback speed.
•
•
•
If the number of the screen frame is over 30 per 1 second, this unit may not
operate normally.
If the video and audio structure of recorded files are not interleaved, either
video or audio is outputted.
If the name of movie file is different from that of the subtitle file,during play-
back of a DivX file, subtitle may not be display.
DVD
Viewing the Title menu
Press TITLE to display the disc's title menu, if available.
•
•
MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg”
DVD
Viewing the DVD MENU
Playable DivX subtitle: SubRip(*.srt/*.txt) ,SAMI(*.smi), SubStation
Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt)
TMPlayer(.txt), DVD Subtitle System(.txt) (Files (VobSub(.sub)) included with
USB device is not supported)
Press MENU to display the disc menu, if available.
DVD
DivX
Starting play from selected time
•
•
•
•
•
•
Playable Codec format: “DIVX3.xx”, “DIVX4.xx “, “DIVX5.xx”, “MP43”, “3IVX”
Playable Audio format: “AC3”, “DTS”, “PCM”, “MP3”, “WMA”
Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
CD-R/RW, DVD R/RW Format: ISO 9660
Searches for the starting point of entered time code. Press DISPLAY during
playback and select the time clock icon. Input the required start time in hours,
minutes, and seconds press ENTER. If you enter the wrong
number, press CLEAR to enter again.
DVD
Last Scene Memory
Maximum Files/Disc: Less than 999 (total number of files and folders)
This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off(Stand-by mode) the unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
15
HT963SA-AP_DUSALLK 2/4/08 11:01 AM Page 16
ACD
MP3
WMA
Creating your own program
Viewing photo files
You can play the contents of a disc in the order you want by arranging the order
of the music files on the disc. The program is cleared when the disc is removed.
ON REMOTE
Select a desired music file then press PROG./MEMO. or select “
press ENTER to add the music file to the program list. To add all music files on
the disc, select “ ” and then press ENTER. Select a music file from the pro-
“ and then
1 Open the disc tray: (On unit: Z)
2 Insert a disc: (On unit)
-
-
gram list then press ENTER to start programmed playback.To clear a music file
from the program list, select the music file you want to clear then press CLEAR
3 Close the disc tray: (On unit: Z)
4 Select a photo file:
-
v V
or select “
program list, select "
icon and then press ENTER. To clear all music files from the
”
5 Display the selected file in full screen:
6 To return to the menu:
ENTER
" then press ENTER.
x
STOP
MP3
Displaying file information (ID3 TAG )
While playing an MP3 file containing file information, you can display the infor-
mation by pressing DISPLAY repeatedly.
Viewing photo files - more you can do
Viewing photo files as a slide show
MP3/WMA music file requirement
MP3/WMA compatibility with this unit is limited as follows:
• File extensions: “.mp3”, “.wma”.
Use vV b B to highlight (
You can change slide show speed using b B when (
) icon then press ENTER to start slide show.
) icon is highlighted.
• Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• CD-R/RW, DVD R/RW Format: ISO 9660
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo.
• Maximum Files/Disc: Less than 999 (total number of files and folders)
Rotate a photo
Screen Saver
Use vV b B to rotate the photo in full screen mode.
The screen saver appears when you leave the unit in Stop mode for about five
minutes.
Pause a slide show
Press PAUSE/STEP (X) to pause a slide show. Press PLAY (B) to continue the
slide show.
DVD
Repeating a specific portion (A-B)
Photo file requirement
Press REPEAT A-B at the beginning of the portion you wish to repeat and again
at the end of the portion. Your selected portion will be repeated continually.
To return to normal playback, press REPEAT A-B to select [OFF].
JPEG file compatibility with this unit is limited as follows:
• File extensions: “.jpg”
• Photo size: Less than 2MB recommended
• CD-R/RW, DVD R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 999 (total number of files and folders)
DVD
DivX
Hearing a different audio
During playback, press AUDIO ( ) repeatedly to switch between the available
audio languages or encoding methods.
16
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 17
Listening to music from your
portable player
Listening to the radio
Be sure that both FM and AM aerials are connected.
ON REMOTE
The player can be used to play the music from many types of portable
player
1 Turn the power on:
POWER
FUNCTION
TUN-/+
2 Select either FM or AM:
3 Select a radio station:
4 To ‘save’ a radio station:
A preset number will show in the display.
PROG/MEMO.
5 To select a ‘saved’ station input the preset
number:
Up to 50 radio stations can be saved.
PRESET-/+
6 To confirm press:
PROG/MEMO.
Listening to the radio - more you can do
ON REMOTE
1 Connect the portable player by plugging the
Look for radio stations automatically
unit into PORT. IN on the front of the player.:
-
Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan auto-
matically and stop when it finds a radio station.
2 Turn the power on:
POWER
INPUT
3 Select the PORTABLE function:
Choose a preset number for a radio station
4 Turn the portable player on and start it
playing:
When storing a radio station, the preset number can be chosen. When the play-
er automatically shows a preset number, press PRESET -/+ to change it. Press
PROG./MEMO. to save your chosen number.
-
Delete all the saved stations
Press and hold PROG./MEMO for two seconds. ERASE ALL will flash up on the
DVD receiver display. Press PROG./MEMO to erase all saved radio stations.
Improve poor FM reception
Press PLAY (B) (MONO/ST). This will change the tuner from stereo to mono
and usually improve the reception.
17
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 18
USB device requirement
Listening to music from your
USB device
The advantage of connecting your portable USB player through the sys-
tem’s USB port is that the USB device can be controlled from the system.
•
•
•
Do not extract the USB device in operating.
A back up demands to prevent a data damage.
If you use a USB extension cable or USB hub, the USB device might not be
recognized.
•
A device using NTFS file system is not supported. (Only FAT (16/32) file sys-
tem is supported.)
•
•
•
•
The USB function of this unit does not support all USB devices.
Digital camera and mobile phone are not supported.
This unit is not supported when the total number of files is 1000 or more.
If the drive of USB device is two or more, a drive folder is displayed on the
screen. If you want to move to the previous menu after you select a folder,
press RETURN.
5.1ch ez Set-up
Listen to sound from TV, DVD and Digital Device with vivid 5.1ch mode.
Even in power off mode, if you press HT SPK, then power is on and
automatically changed to AUX OPT mode.
ON REMOTE
1 Connect the USB device to the unit
using a USB cable (not supplied).:
-
2 Select the USB function:
INPUT
v V
B
3 Select a file from the menu:
4 Start your music playing:
5 Before disconnecting the portable USB
device, change to any other function by
pressing:
FUNCTION or INPUT
-
6 Remove the USB device:
ON REMOTE
Listening to music from your USB device -
more you can do
1 Connect the unit’s OPTICAL IN jack to jack on
optical out of your TV (or Digital Device etc.).:
-
2 Select the AUX OPT:
Compatible USB Devices
To select the AUX OPT directly
TVtHT SPK
-
•
Devices which require additional program installation when you have con-
nected it to a computer, are not supported.
MP3 Player : Flash type MP3 player.
3 Listen sound with 5.1ch speaker.:
4 To escape from AUX OPT
•
FUNCTION or INPUT
The MP3 player requiring installation of a driver is not supported.
•
USB Flash Drive : Devices that support USB2.0 or USB1.1.
18
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 19
Listening to music from your iPod - more you
can do
Listening to music from your
iPod
iPod mode: You can operate your iPod by using the supplied remote
control and controls on your iPod. TV screen is turned off. iPod will not be
charged when selecting the iPod mode. But you can enjoy better sound
quality.
OSD iPod mode: You can operate your iPod by controlling OSD menu
on the TV screen with supplied remote control. The controls on your iPod
are not operational in the OSD iPod mode. If you want to charge the iPod
while listening music, selects the OSD iPod mode.
OSD iPod mode
iPod mode
Pause playback
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue play-
back.
OSD iPod mode
iPod mode
Skip to the next/previous file
Press SKIP (>) to move to the next file.
Press SKIP (.) to return to the beginning of the current file.
Press SKIP (.) twice briefly to step back to the previous file.
OSD iPod mode
iPod mode
Fast forward or fast reverse
During playback, press and hold SCAN (m or M) and then release at a
point you want.
iPod stand
OSD iPod mode
Playing repeatedly
MENU
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter or track will be played back repeatedly. To return to normal playback,
press REPEAT repeatedly to select [OFF].
OSD iPod mode
iPod message
“Please, check your iPod” - If the power of your iPod is insufficient or the
iPod is misconnected or unknown device. Reset the iPod if the iPod is not oper-
ating normally (Refer to http://www.apple.com/support/)
ON REMOTE
1 Connect the iPod by plugging the unit into
iPod on the rear of the unit.:
-
Compatible iPod
2 Turn the power on:
POWER
INPUT
•
•
•
When the unit is connected with dock connector may result in malfunctions
Compatibility with your iPod may vary depending on the type of your iPod.
Depending on your iPod’s software version, it may not be possible to control
your iPod from the unit. We recommend installing the latest software version.
3 Select the iPod or OSD iPod function:
4 Select the menu:
v V ENTER
v V
5 Select a file:
When you use iPod, look out for the following
•
•
6 Start the file playing:
7 To stop the file playing:
B
PLAY
STOP
Interference may happen depending on iPod devices.
The video or photo file is not displayed.
x
8 Before disconnecting the iPod, change to
any other function by pressing:
FUNCTION or INPUT
-
9 Remove the iPod:
19
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 20
Manufacturer
Code Number
Manufacturer
Code Number
Controlling your TV with
the supplied Remote
Control
ADMIRAL
AIWA
AKAI
16,33,37,44,45
70
01
09
MONTGOMERY 01,06,08,09
WARD
NEC
23,24,32,33,34
01,08
07
AMARK
NOBLEX
AOC
01
PACKARD BELL 43
You can control the sound level, input source, TV’s
channel and power switch of your LG TV with the
supplied remote control.
BELL & HOWELL
BROKSONIC
CANDLE
CCE
CENTURION
CINERAL
CITIZEN
33
PANASONIC
PHILCO
07,11,13,25,35,36
01,06,07,08,09,
15,38,43,58
18,19
51
07
08
Controlling other TV’s with the remote con-
trol
PHILIPS
06,07,43,61,62,65
PIONEER
PORTLAND
PROSCAN
QUASAR
30
09
03,37,44
11,13
43
You can control the sound level, input source, TV’s
channel and power switch of non-LG TVs as well. If
your TV is listed in the table, set the appropriate
manufacturer code. While holding down TV
POWER button, press the number buttons to select
the manufacturer code for your TV. Release TV
POWER button.
49,50,51,52,53,54,55
09
09
01,03,08,33,35,37,44
16,38,39,40,41,42,43
01,08
01,09,16,17,18,19
28,29
CORONADO
CROWN
RADIO SHACK 16,17,23
RCA
01,03,37,44,69
CURTIS MATHES
DAEWOO
DAYTRON
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GRADIENTE
HITACHI
JC PENNEY
JVC
REALISTIC
SAMPO
16,17,23
08
SAMSUNG
SANYO
01,08,09,25,68
28,29
SCOTT
01,08
46,47
SEARS
SEMP
09,25,26,27,28,29
64
03,10,11,13,37,44
01,56,57,63,67
SHARP
09,22,23,24,60,66
09,14,15,43
01,08,10,27,35
20,21,63,67
43
SIGNATURE 2000
01,06,08,09,10,
23,24,33,34
SONY
12,62
KIOTE
KMC
KTV
SOUNDESIGN 51
09
SYLVANIA
01,04,05,06,07,
08,35,51
01,08,09,31
LG (GOLDSTAR)01,07,08,09,35,39,40
LODGENET
LOGIK
LXI
MAGNAVOX
SYMPHONIC
TATUNG
TEKNIKA
TELERENT
THOMSON
YORX
46,47
11
07,09,16,33,51
09,33
69
08
33
33
09,24,25,26,27,28,29
01,02,04,05,06,
07,08,09,20,
34,35,43,51,61,62,65
TOSHIBA
WARDS
XR1000
01,25,26,27,64
01,06,08,09,10,33,34
48
MAJESTIC
MARANTZ
MEMOREX
MGA/MITSUBISHI
33
01,32
33
ZENITH
01, 02,33,59
01,08,32,34
20
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 21
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Italian
Ukrainian
Urdu
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Bulgarian
Burmese
Byelorussian
Chinese
Latvian, Lettish
Area Codes
Choose a area code from this list.
Area
Code
AF
AR
AU
AT
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
Area
Code
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Code
Area
Code
Area
Code
LK
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
GL
HK
HU
IN
ID
IL
MV
MX
MC
MN
MA
NP
NL
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
PY
PH
PL
PT
RO
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
IT
SA
SN
SG
SK
SI
ZA
KR
ES
Uganda
Ukraine
Brazil
JM
JP
KE
KW
LY
LU
MY
Cambodia
Canada
Chile
China
Colombia
Congo
NZ
NG
NO
OM
PK
PA
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
FI
FR
DE
GB
GR
Oman
Pakistan
Panama
21
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 22
Troubleshooting
CAUSE
CORRECTION
PROBLEM
No power
No picture
Plug the power cord into the wall outlet securely.
Select the appropriate video input mode on the TV so the pic-
ture from the DVD Receiver appears on the TV screen.
Connect the video cables securely to both the TV and DVD
Receiver.
The power cord is disconnected.
The TV is not set to receive the DVD signal.
The video cables is not connected securely.
Select the correct input mode of the audio receiver so you can
hear the sound from the DVD receiver.
Connect the audio cables into the connection terminals cor-
rectly.
There is little or no sound
Equipment connected via the audio cable is not set to
receive DVD signal output.
The audio cables are not connected to the speakers or
receiver securely.
Replace with a new audio cable.
Clean the disc using a soft cloth with outward strokes.
Insert a disc
The audio cables are damages.
The disc is dirty.
No disc is inserted.
The DVD picture quality is poor
A DVD/CD will not play
Insert a playable disc (check the disc type, colour system
and regional code).
An unplayable disc is inserted.
Place the disc with the label or printed side facing
upwards.
The disc is inserted upside down.
Press SETUP to close the menu screen.
Enter your password or change the rating level.
The menu is open on screen.
There is a parental lock which prevents the playback of DVDs
with a certain rating.
Clean the disc using a soft cloth with outward strokes.
Move DVD receiver and audio components further away from
your TV.
Humming noise heard while a
DVD or CD is playing
The disc is dirty.
The DVD receiver is located too close to the TV, causing feed-
back.
Check the antenna connection and adjust its position.
Attach an external aerial if necessary.
Radio stations can’t be tuned in
properly
The antenna is positioned or connected poorly.
Tune to the station manually.
Preset some radio stations, see page 17 for details.
The signal strength of the radio station is too weak.
No stations have been preset or preset stations have
been.cleared(when tuning by scanning preset channels).
The remote is not pointed directly at the DVD receiver.
The remote is too far from the DVD receiver.
There is an obstacle in the path of the remote control and the
unit.
The remote control doesn’t
work well / at all
Point the remote directly at the unit.
Use the remote within 23 feet (7m) of the DVD receiver.
Remove the obstacle.
Replace the batteries with new ones.
The batteries in the remote control are flat.
22
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 23
About the
Symbol Display
Types of Playable Discs
“
” may appear on your TV display during operation and indicates that the
Logo
Type
function explained in this owner’s manual is not available on that specific DVD
video disc.
DVD-VIDEO: Discs such as movies that can
be purchased or rented.
Regional Codes
DVD-R: Video mode and finalized only
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
DVD-RW: Video mode and finalized only
DVD VR format that have been finalized can not be
played in this unit
•
Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
•
DVD+R: Video mode only
Supports the double layer disc also
Copyrights
DVD+RW: Video mode only
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection
technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Audio CD:
This unit plays DVD R/RW and CD-R/RW that contains audio titles,
DivX, MP3,WMA and/or JPEG files. Some DVD RW/DVD R or CD-
RW/CD-R cannot be played on this unit due to the recording quality or
physical condition of the disc, or the characteristics of the recording
device and authoring software.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVI-
SION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMEND-
ED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued &
pending. DTS and DTS Digital Surround are registered trademarks and the
DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All
Rights Reserved.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trade-
marks or registered trademarks of HDMI licensing LLC.
23
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 24
Specifications
General
Power supply
Refer to main label.
Power consumption
Net Weight
Refer to main label.
3.9 kg
External dimensions (W x H x D)
Operating conditions Temperature
430 x 73 x 305 mm
5°C to 35°C,
Operation status: Horizontal
5% to 85%
Semiconductor laser,
wavelength 650 nm
Operating humidity
Laser
Tuner FM/AM [MW]
FM Tuning Range
FM Intermediate Frequency
AM Tuning Range
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
10.7 MHz
522 - 1,620 kHz or 520 - 1,720 kHz
AM Intermediate Frequency 450 kHz
Amplifier
Stereo mode
155 W + 155 W (4Ω at 1 kHz, THD 10 %)
Surround mode Front:
155 W + 155 W (THD 10 %) Ce nter*:155 W
Surround*: 155 W + 155 W
(4Ω at 1 kHz, THD 10 %)
Subwoofer*: 225 W (3Ω at 30 Hz, THD 10 %)
Speakers
Front/Rear
Speaker
Center
speaker
Passive
Subwoofer
Type
1 Way 1 Speaker 1 Way 1 Speaker 1Way1Speaker
Impedance
4 Ω
4 Ω
3 Ω
Rated Input Power
Max. Input Power
155 W
310 W
155 W
310 W
225 W
450 W
Net Dimensions (W x H x D) 98 x 226 x 90 mm
Net Weight 0.8 kg
360 x 106 x 104 mm 161 x 401 x 383mm
1.0 kg 5.8 kg
Designs and specifications are subject to change without
pior notice.
24
HT963SA-AP_DUSALLK 1/31/08 1:16 PM Page 25
LG Electronics, Inc.
Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the war-
ranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only
to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the defective unit repaired or
replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to return the unit to LG for
repair or replacement.
* Parts replaced are warranted for the remaining portion of the original
warranty period.
Shipping both ways will be paid by LG during the first 90 days of the Warranty
Period. During the remainder of the Warranty Period (91-365 days), you pay
inbound shipping charges and LG pays return shipping charges.
Visit our website at: http://us.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN
DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDI-
RECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMI-
TATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER
DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and
you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or failure to maintain, or separate sys-
tem components; and
• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or contrary to the require-
ments or precautions in the Operating Guide, accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current
or voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer software, institutional or commercial use, or other
causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy, Product
Assistance, or Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year) and select
appropriate options from the menu.
Or visit our website at http://us.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
P/NO : MFL42932912
Issue O
ENGLEWOOD CLIFFS, NJ.
Printed in China
|