before using your Kenwood
appliance
Read these instructions carefully
and retain for future reference.
Remove all packaging and any
labels.
Important – UK only
The wires in the cord are coloured
as follows:
to use your handmixer
1 Insert the beaters– turn and push.
(To remove them, press the beater
release button.)
2 Plug in.
3 Push the speed switch forward.
service and customer
care
G
G
G
G
G
ቢ
Blue = Neutral, Brown = Live.
The appliance must be protected
by a 3A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
must be DESTROYED
G
ባ
ቤ
ብ
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
G
As the mixture thickens, increase
safety
Never put the handmixer body in
water or let the cord or plug get
wet.
UK
the speed.
G
If you need help with:
G
If the machine labours increase the
G
using your handmixer
speed.
G
servicing or repairs (in or out of
4 When the mixture has reached the
desired consistency, return the
speed switch to the off position,
then lift the beaters out of the
bowl.
G
G
Keep fingers, hair, clothing and
utensils away from moving parts.
Never let the cord touch hot
surfaces or hang down where a
child could grab it.
Ensure the cord is fully unwound
before using the handmixer.
Always unplug the appliance when
not in use, before fitting or
removing parts or before cleaning.
Never use a damaged handmixer.
Get it checked or repaired: see
'service and customer care'.
Never use an unauthorised
attachment.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
responsible for their safety.
Children should be supervised to
ensure that they do not play with
the appliance.
guarantee)
ట call Kenwood Customer Care on
023 9239 2333. Have your
model number ready - it is
located on the underside of your
handmixer.
5 Unplug.
G
G
G
G
spares and attachments
cleaning
టcall 0870 2413653.
other countries
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is
inadvertently inserted into a 13A
socket outlet.
G
Always switch off, unplug and
G
remove the beaters before
cleaning.
Contact the shop where you
G
bought your handmixer.
G
Never put the handmixer body in
G
water or let the cord or plug get
wet.
Designed and engineered by
G
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
G
G
Kenwood in the UK.
G
Made in China.
beaters
G
Wash by hand or in your
dishwasher, then dry.
handmixer body
G
Wipe with a damp cloth, then dry.
before using your handmixer
for the first time
1 Wash the beaters: see 'cleaning'.
storage see illustration
1 Wrap the cord around the base of
the handmixer. Then clip the cord
together with the cable tidy.
2 Push the grip clip into the sockets.
Then clip in the beaters.
know your Kenwood
handmixer see illustrations
G
G
ቢ
ባ
ቤ
ብ
ቦ
speed switch
beater release button
beaters
grip clip
cable tidy
ቦ
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
instructions.
before plugging in
G
Make sure your electricity supply is
the same as the one shown on the
underside of your handmixer.
|