User Guide
Data Diode SPAN TAP | P1GCSSP | 1.2.58
The P1GCSSP is a portable 10M, 100M, 1G TAP designed for out-of-band monitoring and security
tools analysis. The P1GCSSP supports three (3) span mode options utilizing unidirectional solutions
to ensure that traffic cannot be injected back into the network port(s) from any span port.
This document describes the front panel, LED indications, interfaces, rear panel, rear switch settings,
port speed options and installation procedure for the P1GCSSP.
Front Panel
LED Indications
Port A LFP
Port A LNK
Port B LFP
Port B LNK
N/A
Link/Activity LED
N/A
Link/Activity LED
Interfaces
Span1 Mode
Port A
Port B
Port C
Port D
Network Port (ingress only)
Span Port
Span Port
Span Port
Span2 Mode
Port A
Network Port (ingress only)
Network Port (ingress only)
Span Port (aggregate A and B)
Span Port (aggregate A and B)
Port B
Port C
Port D
Span3 Mode
Port A
Network Port (ingress only)
Network Port (ingress only)
Network Port (ingress only)
Span Port (aggregate A, B and C)
Port B
Port C
Port D
Copyright © 2022 Garland Technology, LLC. All rights reserved.
1
User Guide
Data Diode SPAN TAP | P1GCSSP | 1.2.58
2. Using the DIP switches on the rear panel, set the P1GCSSP to the desired speed and span mode.
This step must be completed prior to powering the unit on. If the speed or mode is modified, the
unit must be power cycled.
3. Insert 1G SFPs into ports 3 and 4.
4. Insert standard Ethernet cables into ports A and B. These ports are Auto MDIX.
5. Connect the power supply to the P1GCSSP and plug it in to an available power source.
Optional Rack Mount Bracket
Copyright © 2022 Garland Technology, LLC. All rights reserved.
3
|