FUJITSU STYLISTIC Q584 User Manual

System  
Operating Manual  
FUJITSU Tablet STYLISTIC Q584  
Copyright and Trademark Information  
Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness  
of this document; however, as ongoing development efforts are continually improving the  
capabilities of our products, we cannot guarantee the accuracy of the contents of this  
document. We disclaim liability for errors, omissions, or future changes.  
Fujitsu, the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limited  
or its subsidiaries in the United States and other countries.  
Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or  
its subsidiaries in the United States and other countries.  
Microsoft and Windows are either registered trademarks or trademarks of Microsoft  
Corporation in the United States and/or other countries.  
The ExpressCard word mark and logo are owned by the Personal Computer  
Memory Card International Association (PCMCIA) and any use of such marks by  
Fujitsu America, Incorporated is under license.  
Google is a trademark or registered trademark of Google Incorporated.  
Bluetooth is a trademark of Bluetooth SIG, Inc., USA.  
OmniPass is a trademark of Softex, Inc.  
Roxio is a trademark of Roxio, a division of Sonic Solutions.  
PowerDirector, PowerDVD, YouCam, and MakeDisc are trademarks of CyberLink Corp.  
Adobe, Acrobat, and Adobe Reader are either registered trademarks or trademarks of Adobe  
Systems Incorporated in the United States and/or other countries.  
Made under license from DTS Licensing Limited. DTS and the symbol are registered trademarks and  
& DTS Boost is a trademark of DTS, Inc. Product contains software. © DTS, Inc. All rights reserved.  
The DVD player found in some models of the LIFEBOOK notebook incorporates copyright  
protection technology that is protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation and other rights users. Use  
of this copyright protection technology must be authorized by Macrovision Corporation, and  
is intended for home and other limited viewing uses only unless authorized by Macrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
All other trademarks specied here are the property of their respective owners.  
Contents  
Contents  
Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Ports and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Additional safety notes for devices with radio components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Protecting the display screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Energy saving under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Traveling with your Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Before you travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Transporting the Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Storing your Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Cleaning the Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Further information on cleaning the Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Cleaning with disinfectant wipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
First-time setup of your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Unpacking and checking the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Choose a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Switching on the device for the rst time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Installing Bonus Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Working with the Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Battery charging indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Switching the Tablet PC on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Programing the ON/OFF button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Switching the Tablet PC off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Handwriting recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Select display orientation (portrait or landscape format) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Touch commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Calibrate the Dual Digitizer for nger-based operation of the device. . . . . . . . . . . . . . . . . . . . . . 25  
Actions with one nger (Windows 8.1 Modern) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Actions with one nger (Windows 8.1 Desktop) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Actions with two ngers (Windows 8.1 Desktop) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Using the stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Stylus location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Adjusting the stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Calibrating the stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Replacing the stylus tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Installing a stylus tether . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Tablet buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Webcam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Charging and maintaining the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Using the energy saving functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Fujitsu  
3
Contents  
Supported formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Inserting a SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Removing a SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Wireless LAN/Bluetooth/UMTS/4G radio components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Setting up WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Further information on WLAN and Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Access via UMTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Access via Wireless WAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Ethernet and LAN (only with docking cradle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Accessories for your Tablet PC (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Your docking cradle (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Docking cradle components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Setting up the cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Connecting the Tablet PC to the cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Disconnecting the Tablet PC from the cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Keyboard cover (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Keyboard cover ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Connecting the Tablet PC to the keyboard cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Separating the Tablet PC from the keyboard cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
VESA mount (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Shoulder strap (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Folio case (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Micro USB adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Conguring the ngerprint sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Conguring password protection in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Protecting BIOS Setup Utility (supervisor HDD password and user HDD password) . . . . . . . 58  
Password protection for booting the operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Password protection for the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
SmartCard reader (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Inserting the SmartCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Trusted Platform Module - TPM (device dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Enabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Disabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Connecting external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Connecting an external monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
HDMI port (via optional docking cradle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
VGA monitor port (via optional docking cradle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
How to remove USB devices correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Headphones port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66  
Settings in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Starting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
BIOS Setup Utility operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
4
Fujitsu  
Contents  
Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . 68  
Exit Discarding Changes - Reject changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . 68  
Load Setup Defaults – load default values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Discard Changes - Discard Changes without exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . 69  
Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . 69  
Save changes and power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Help if problems occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Recovering your Factory Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
The Tablet PC’s date or time is incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
Battery indicator does not illuminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
The Tablet PC’s touchscreen remains dark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
The display on the Tablet PC’s touchscreen is difcult to read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
The external monitor remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
The external monitor is blank or the image is unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
The cursor does not correctly follow the stylus movements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Stylus input not working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
The Tablet PC does not start after switch on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
The Tablet PC stops working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
The printer does not print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
The wireless connection to a network does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
The battery discharges too quickly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
SmartCard reader is not recognized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
SmartCard PIN forgotten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
User and/or supervisor SmartCard lost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
SmartCard lost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Acoustic warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Error messages on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76  
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
WLAN specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
AC adapter (36 W) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
Docking cradle (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
Keyboard cover (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
VESA mount (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
Shoulder strap (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
Folio case (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
USB adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83  
Manufacturer’s notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
Recycling your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
DOC (Industry CANADA) Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
UL Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85  
ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86  
Declarations of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86  
FCC and IC Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87  
Regulatory Notes and Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
Before Using the Optional Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
Fujitsu  
5
Contents  
Wireless LAN Devices Covered by this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
Characteristics of the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
Wireless LAN Modes Using this Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91  
Deactivating/Disconnecting the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
Conguring the Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
Connection to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
Troubleshooting the WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94  
Using the Bluetooth Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96  
Image Backup and Recovery Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97  
Creating a Backup of Bootable Disk and Recovery Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97  
RECOVER YOUR SYSTEM WHEN THE HARD DRIVE IS STILL ACCESSIBLE . . . . . . . . . . . . . 98  
Using the Recovery and Utility Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98  
Restore the Recovery Image from Hidden Partition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100  
RECOVER YOUR SYSTEM WHEN THE HARD DRIVE IS NOT BOOTABLE . . . . . . . . . . . . . . . . 101  
Restore the Recovery Image for Full Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101  
Recovering Your Recovery Image Using Recovery and Utility (for new hard drive or  
non-bootable hard drive) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102  
Installing the Software after the Recovery Image is Restored . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106  
6
Fujitsu  
Fujitsu Contact Information  
Fujitsu Contact Information  
Service and Support  
You can contact Fujitsu Service and Support in the following ways:  
Toll free phone: 1-800-Fujitsu (1-800-838-5487)  
Before you place the call, have the following information ready so that the customer  
support representative can provide you with the fastest possible solution:  
Product name  
Product conguration number  
Product serial number  
Purchase date  
Conditions under which the problem occurred  
Any error messages that have occurred  
Type of device connected, if any  
Fujitsu Shopping Online  
Maintaining Latest Conguration  
To ensure that you always have the most current driver updates related to your system, occasionally  
access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from  
the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities,  
and applications to determine whether you have the latest versions. If you have a Windows 7  
or Windows 8/8.1 operating system, you will need to go to the Support Site to download the  
Limited Warranty  
Your STYLISTIC Tablet PC is backed by a Fujitsu International Limited Warranty. Check the service  
kit that came with your Tablet PC for the Limited Warranty period and terms and conditions.  
Fujitsu  
7
 
Notational conventions  
Notational conventions  
Pay particular attention to text marked with this symbol. Failure to observe  
these warnings could pose a risk to health, damage the device or lead  
to loss of data. The warranty will be invalidated if the device becomes  
defective through failure to observe these warnings.  
Indicates important information for the proper use of the device.  
Indicates an activity that must be performed.  
Indicates a result.  
This font  
Indicates data entered using the keyboard in a program dialog or at the  
command line, e.g. your password (Name123) or a command used to start  
a program (start.exe)  
This font  
Indicates information that is displayed on the screen by a program, e.g.:  
Installation is complete.  
This font  
Indicates  
terms and texts used in a software interface, e.g.: Click on Save  
names of programs or les, e.g. Windows or setup.exe.  
"This font"  
Indicates  
cross-references to another section, e.g. "Safety information"  
cross-references to an external source, e.g. a web address: For more  
names of CDs, DVDs and titles or designations for other materials, e.g.:  
"CD/DVD Drivers & Utilities" or "Safety/Regulations" manual  
Key  
F10  
Indicates a key on the keyboard, e.g:  
.
This font  
Indicates terms and texts that are emphasized or highlighted, e.g.: Do  
not switch off the device.  
8
Fujitsu  
 
Ports and controls  
Ports and controls  
This chapter presents the individual hardware components of your device. It gives an  
overview of the indicators and connections of the device. Please familiarize yourself  
with these items before you start to work with the device.  
Front  
1
2
3
4
8
7
6
5
1
2
3
4
= Ambient light sensor  
= Webcam LED  
5
6
7
8
= Stylus tether attachment point  
= Recess for cradle  
= Webcam  
= Docking port for cradle or keyboard cover  
= Recess for cradle  
= Battery charging indicator  
Fujitsu  
9
 
Ports and controls  
Left-hand side  
1
2
3
4
5
1
2
3
= Headphones port  
= ON/OFF button  
= Volume buttons  
4
5
= Shortcut button  
= Speaker  
Right-hand side (with and without covers)  
1
2
3
4
4
5
5
6
1
2
3
6
1
2
3
= Speaker  
4
5
6
= USB port (USB 3.0, protected by cover)  
= Micro USB port (protected by cover)  
= DC jack (DC IN, protected by cover)  
= Storage card slot (protected by cover)  
= SIM card slot (protected by cover)  
10  
Fujitsu  
Ports and controls  
Back (2 options: Standard shell with at back and no screw hole attachment points or Smart  
Card shell with integrated Smart Card reader and screw hole attachment points.)  
1
5
4
3
2
6
7
6
1
5
4
3
6
2
6
1
2
3
4
= Stylus holder  
5
6
= Webcam LED  
= Fingerprint sensor  
= Webcam  
= Screw holes (device-dependent) for  
securing accessories  
7
= SmartCard reader (device dependent)  
= Camera light  
Fujitsu  
11  
Important notes  
Important notes  
INoteosrtantnotes  
m
p
This chapter contains essential safety information which must be followed when working  
with your Tablet PC. The other notes provide useful information on your Tablet PC.  
Safety instructions  
SIn  
a
fofermtyaintif  
o
onrmation  
,
Please follow the safety notes provided in the "Safety/Regulations" manual  
as well as the safety notes given below.  
Please pay special attention to the sections in the manual marked  
with the symbol on the left.  
When connecting and disconnecting cables, observe the relevant  
notes in this operating manual.  
Read the information on the ambient conditions in the "Technical data", Page 78 chapter  
and the information in the "First-time setup of your device", Page 17 chapter before  
preparing your Tablet PC for use and switching it on for the rst time.  
When cleaning the device, please observe the relevant notes in the section .  
Pay attention to the additional safety notes for devices with radio components  
provided in the "Safety/Regulations" manual.  
When handling this device, you come into contact with lead, a chemical which in  
California is held to be a possible cause of birth defects and other damage to fertility.  
Wash your hands after using the device.  
This Tablet PC complies with the relevant safety regulations for data processing equipment. If  
you have questions as to whether you can set up the Tablet PC in the intended environment,  
please contact your sales outlet or our hotline/service desk.  
Additional safety notes for devices with  
radio components  
RWBlauir  
d
eitoleo  
c
soosthmL,ApSoNa  
n
fe  
e
t
nytnotes  
s
If a radio component (Wireless LAN, Bluetooth, UMTS/4G) is integrated in your Tablet PC, you  
must be sure to observe the following safety precautions when using your Tablet PC:  
Switch off the radio components when you are in an aircraft or driving in a car.  
Switch off the radio components when you are in a hospital, an operating room or near a medical  
electronics system. The transmitted radio waves can impair the operation of medical devices.  
Switch off the radio components, when you let the device get near ammable gases  
or into hazardous environments (e.g. gas station, paintshops), as the transmitted  
radio waves can cause an explosion or a re.  
For further information on how to switch the radio components on and off, refer  
12  
Fujitsu  
                 
Important notes  
Protecting the display screen  
Depending on your device conguration, where applicable your device is not waterproof.  
In this event, do not pour liquids onto the device and do not wash it with a wet cloth.  
Do not place items on the top of the display, or damage may occur.  
During normal use of the device, small particles from the environment  
can become embedded in the stylus tip and scratch the screen. The  
warranty does not cover a scratched screen.  
Energy saving  
NEPnoewtergs saving  
e
ry  
If you will not be using your Tablet PC, switch it off. Switch off any connected external devices when  
they are not in use. If you use the energy saving functions, the Tablet PC uses less power. If you do  
this, you will be able to work longer with the Tablet PC before having to recharge the battery.  
The energy efciency is increased and environmental pollution is reduced.  
You save money and help protect the environment.  
Energy saving under Windows  
Make use of the available energy saving functions as described in chapter  
Fujitsu  
13  
         
Important notes  
Traveling with your Tablet PC  
MNTar  
o
oabtbneleissletPCprteration  
p
o
Please follow the instructions below when traveling with your Tablet PC.  
Before you travel  
Switch off the radio component for data security reasons. With data trafc via a wireless  
connection, it is also possible for unauthorized third parties to receive data.  
Information on activating data encryption is provided in the documentation  
for your radio component.  
If you want to use your Tablet PC during a ight, ask the ight attendants to see if it is safe to use it.  
When traveling in other countries  
If you are traveling abroad, check that the AC adapter can be operated with the  
local AC voltage. If this is not the case, obtain the appropriate AC adapter for  
your Tablet PC. Do not use any other converter!  
Check whether the local AC voltage and the AC cable are compatible. If this is not  
the case, buy an AC cable that suits the local conditions.  
Enquire with the appropriate government ofce of the country you will be travelling in as to  
whether you may operate the radio component integrated in your Tablet PC there.  
Take the necessary travel adapters with you when traveling abroad. Check in the following  
table for which travel adapters you will need, or ask your travel organizer.  
Power connection  
Travel destination  
United States, Canada, Mexico, parts of Latin  
America, Japan, Korea, Philippines, Taiwan  
Russia and the Commonwealth of Independent  
States (CIS), much of Europe, parts of Latin  
America, the Middle East, parts of Africa, Hong  
Kong, India, much of south-east Asia  
United Kingdom, Ireland, Malaya, Singapore,  
parts of Africa  
China, Australia, New Zealand  
14  
Fujitsu  
       
Important notes  
Transporting the Tablet PC  
Protect the Tablet PC from severe shocks and extreme temperatures  
(e.g. direct sunlight in a car).  
Do not transport your Tablet PC while it is turned on.  
Carry your Tablet PC with you while traveling, rather than checking it in as baggage.  
Never put your Tablet PC through a metal detector; have it hand-inspected by  
security personnel. You can however, put your Tablet PC through a properly  
tuned X-ray machine. To avoid problems, place it close to the entrance of  
the machine and remove it as soon as possible or have it hand-inspected  
by security personnel. Security ofcials may require you to turn your Tablet  
PC on, so make sure you have a charged battery on hand.  
Switch the Tablet PC off.  
Unplug the AC plug of the AC adapter and all external devices from the power outlets.  
Disconnect the AC adapter cable and the data cables for all external devices.  
To protect the Tablet PC against damaging jolts and bumps, use a suitable Tablet  
PC carrying case to transport your Tablet PC.  
Storing your Tablet PC  
If storing your Tablet PC for a month or longer, turn it off, fully charge the battery,  
then remove and store all Lithium Polymer batteries.  
Store your Tablet PC in a cool, dry location. Temperatures should remain  
between 13ºF / -25ºC and 140ºF / 60ºC.  
Store your Tablet PC and batteries separately. If you store your Tablet PC with  
a battery installed, the battery will discharge, and battery life will be reduced. In  
addition, a faulty battery might damage your Tablet PC.  
Always power off the Tablet PC before transporting and/or packaging it.  
After shutting down the Tablet PC, wait until the status led panel indicates  
power off condition (i.e., no lights are illuminated).  
It is possible that the Tablet PC may not automatically go to power-off or hibernate  
mode when you close the lid. This situation may occur due to pre-operating system  
boot password security settings or some other application running on the Tablet PC.  
Attempting to transport the Tablet PC while power is on may damage  
the Tablet PC due to shock or overheating.  
Fujitsu  
15  
   
Important notes  
Cleaning the Tablet PC  
Use of incorrect cleaners can result in optical impairment of the LCD and / or  
damage to the computer. Always refer to the cleaner manufacturer’s guidelines and  
material safety data sheets fo proper handling and use of the products.  
Never use ammonia, acidic, or alkaline cleaners or organic chemicals  
such as paint thinner, acetone or kerosene. It may damage surface  
nishes and the coating of the LCD screen.  
Never use compressed air for cleaning your computer.  
If your Tablet PC has a Smart Card slot, be very careful to avoid any  
liquid entering the slot as this can damage the unit.  
Further information on cleaning the Tablet PC  
The Tablet PC does not oat.  
If the Tablet PC is exposed to water or other liquids with its connections open, liquid  
can penetrate the Tablet PC and cause a malfunction. Do not continue to use the  
Tablet PC. Switch it off and contact our hotline / our service desk (see enclosed list of  
service desks or visit our website at: "http://www.fujitsu.com/us/support/").  
Cleaning with disinfectant wipes  
There are many ways of disinfecting surfaces. The following disinfectant wipes  
have been tested successfully with the Tablet PC:  
MG Chemicals Multipurpose Alcohol Wipes (alcohol-based)  
PROSAT® Sterile™ PS-911EB/EtOH Life Sciences Wipes (alcohol-based)  
Clorox® Healthcare Bleach Germicidal Wipes (without alcohol)  
Remember, if your Tablet PC is congured with the Smart Card shell, it does not  
have a cover to close the port and liquid could enter and damage the device. Take  
extra precautions when cleaning around the Smart Card reader.  
For proper use of disinfectant wipes, please read the manufacturer’s instructions.  
Before cleaning, please test the disinfectant wipe on a small area of the Tablet  
PC. Some medical disinfectant wipes may leave residue on the Tablet PC which  
is difcult to remove again, or they may dry out quickly. Therefore dispose of  
the wipes after one single use and do not reuse them.  
16  
Fujitsu  
     
First-time setup of your device  
First-time setup of your device  
FGierstti-  
n
ti  
g
m
s
e
tasretetup  
d
Please read the chapter "Important notes", Page 12.  
If your device is equipped with a Windows operating system, the necessary  
hardware drivers and supplied software are already pre-installed.  
Before switching it on for the rst time, connect the device to the AC voltage using  
the AC adapter, see "Connecting the AC adapter", Page 18. The AC adapter must  
remain connected during the whole of the installation process.  
A system test is performed when your device is rst switched on. Various messages  
can appear. The display may remain dark for a short time or may icker.  
Please follow the instructions on the screen.  
NEVER switch off your device during the rst-time setup process.  
The battery must be charged if you want to operate your device using the battery.  
When used on the move, the built-in battery provides the device with the necessary power. You  
can increase the operating time by using the available energy-saving functions.  
For instructions on how to connect external devices (e.g. mouse, printer) to your Tablet  
PC, please refer to the operating manual for your device.  
Unpacking and checking the device  
If you nd that damage has occurred during transport, please notify  
your local sales outlet immediately!  
Unpack all the individual parts.  
PTra  
a
c
n
k
s
a
p
g
oinrt  
g
Check your device for any visible damage which may have occurred during transportation.  
You may need to reuse the packaging in future, for example if you  
need to transport your device.  
Fujitsu  
17  
           
First-time setup of your device  
Choose a location  
CSAeChto  
a
u
o
d
p
s
a
e
ptelorcation  
a
Choose a suitable location for the device before setting it up. In doing  
so, please follow these instructions:  
Never place the device or the AC adapter on a heat-sensitive surface.  
The surface could be damaged as a result.  
Never place the device on a soft surface (e.g. carpeting, upholstered furniture,  
bed). This can result in damage caused by overheating.  
The underside of the device heats up during normal operation. Prolonged contact  
with the skin can become unpleasant or even result in burns.  
Place the device on a stable, at, non-slippery surface. Please note that the  
rubber feet of the device may mark certain types of delicate surfaces.  
Keep other objects at least 100 mm / 4 inches away from the device  
and its AC adapter to ensure adequate ventilation.  
Do not expose the device to extreme environmental conditions. Protect  
the device against dust, humidity and heat.  
Connecting the AC adapter  
MACaka  
i
d
n
a
gpreteadytouse  
r
Observe the safety notes in the enclosed "Safety/Regulations" manual.  
The supplied AC cable conforms to the requirements of the country in which  
you purchased your device. Make sure that the AC cable is approved for  
use in the country in which you intend to use it.  
Open the cover of the DC jack  
socket (DC IN).  
Connect the AC cable (1) to the AC adapter.  
Plug the AC cable (2) into a power outlet.  
Connect the AC adapter cable (3) to the  
DC jack socket (DC IN) of the device.  
2
18  
Fujitsu  
           
First-time setup of your device  
Switching on the device for the rst time  
Switchingonforthersttime  
To make it easier to use your device for the rst time, the operating system  
is pre-installed on the hard disk.  
1
Press the ON/OFF button (1) for about one second to switch the device on.  
During the installation process, follow the on-screen instructions.  
You can nd information and help on the Windows operating system functions  
on the Internet at "http://windows.microsoft.com".  
If a Windows 8.1 operating system is installed on your Tablet PC, a tutorial is  
automatically started when a new user logs on for the rst time, which shows  
you how to use the new functions of Windows 8.1.  
Fujitsu  
19  
   
First-time setup of your device  
Installing Bonus Apps  
After you have started your system the rst time, you will see a Bonus Apps icon on your desktop.  
Click on the icon to see which additional applications are available for you to install.  
Applications that are already installed appear in grey, those that are  
available for installation appear in blue.  
Select the applications you wish to install by selecting the checkbox adjacent to your selection.  
or  
Click Select All if you would like to install all available applications  
To conrm your selection click Install.  
Note that in some cases (depending upon which application was selected for  
installation) after installation completes, the system will prompt you to reboot.  
There are also cases in which if multiple applications are selected to install  
but one of them needs a reboot, the system will reboot and continue  
installing the rest of the selected applications.  
20  
Fujitsu  
 
Working with the Tablet PC  
Working with the Tablet PC  
Tablet,operation  
This chapter describes the basics for operating your Tablet PC. You can nd instructions  
on how to connect external devices (e.g. mouse, ash storage) to the Tablet PC in  
Please refer to the notes in the chapter "Important notes", Page 12.  
Battery charging indicator  
Sty  
a
m
tuboinlsdicators  
s
The battery charging indicator (4) provides information about the status of the power supply.  
1
2
3
4
8
7
6
5
Status / color  
On (Red)  
Off  
Description  
The battery is being charged.  
The Tablet PC is switched off or in Save-to-Disk mode.  
Fujitsu  
21  
           
Working with the Tablet PC  
Switching the Tablet PC on  
TPS  
a
uo  
b
swlp  
e
e
e
tr  
:
n-So  
d
wn/RPitecohswiune  
m
g
r-eonbnuinttdoincator  
o
1
Press the ON/OFF button (1) for about one second to switch the device on.  
Programing the ON/OFF button  
You can program the ON/OFF button:  
Operating system  
Menu  
Windows 8.1 Desktop - Control Panel - Hardware  
and Sound - Power Options  
Windows 8.1  
If you have assigned a password, you must enter this when requested to  
do so, in order to start the operating system. Detailed information can be  
found in the chapter "Security functions", Page 56.  
22  
Fujitsu  
       
Working with the Tablet PC  
Switching the Tablet PC off  
Back up your data and close all applications before you switch off your  
device. Otherwise data might be lost.  
Shut down the operating system correctly.  
Ta blet PC  
or  
Press the ON/OFF button for < 2 seconds to switch into connected standby mode.  
or  
or  
Press the ON/OFF button for > 2 seconds to < 10 seconds to display the  
"Sweep downwards to switch off" popup.  
If the Tablet PC is not switched off automatically, press the ON/OFF button  
for about 10 seconds (forced shutdown).  
Handwriting recognition  
For detailed information on handwriting recognition, see the documentation for your operating system.  
Under Windows 8.1 you can set the required language under Control Panel –  
Time, Language and Region – Language.  
Fujitsu  
23  
     
Working with the Tablet PC  
Touchscreen  
TNooutechssc re en  
Background lighting  
LCD screens are operated with background lighting. The luminosity of the background  
lighting can decrease over the period of use of the Tablet PC. However, you can  
set the brightness of your screen manually.  
Ambient light sensor  
If your Tablet PC was shipped with the Windows operating system, the screen brightness is  
regulated by means of the ambient light sensor and depending on the respective light conditions.  
This results in optimum readability and longer battery life at the same time.  
If your Tablet PC was shipped with Windows 8.1, the adaptive brightness setting is deactivated. To  
change the ambient light sensor settings, select Control Panel - System and Security - Power Options -  
Change plan settings - Change advanced power settings - Display - Activate adaptive brightness setting..  
Select On to activate the adaptive brightness setting with the help of the ambient light sensor.  
Synchronizing the display on the touchscreen and an external monitor  
In Windows 8.1 wipe your nger over the screen from the right-hand edge. The setting  
Charms - Devices - Second monitor opens. Select the desired output type.  
You can also use the Fujitsu Display Manager in the Windows Mobility Center to set the output type.  
24  
Fujitsu  
     
Working with the Tablet PC  
Select display orientation (portrait or  
landscape format)  
LPD  
a
ois  
n
r
p
tdrlsaciytafo riemfnoatratmtioant  
o
p
r
e
You can choose to use either portrait or landscape format for the display.  
Windows 8.1  
You can change these settings under Windows 8.1 Desktop - Control Panel -  
Hardware and Sound - Windows Mobility Center / Rotate screen.  
To switch off the automatic changing between portrait and landscape format, select Control  
Panel - Appearance and Personalization - Display - Screen Resolution.  
In the Fujitsu Tablet Controls settings, proles are saved for operation  
with different screen orientations. These proles have preset standard  
congurations that can be modied as desired.  
These settings do not just affect the monitor settings on the Tablet PC,  
but also on external monitors that are connected.  
Touch commands  
You can execute certain commands by using your nger tip on the touchscreen of your device.  
Alternatively, everything which you can select or activate using your nger  
tip can also be selected or activated using the stylus.  
Calibrate the Dual Digitizer for nger-based  
operation of the device.  
If Windows 8.1 is installed on your Tablet PC, your Tablet PC is  
already calibrated at initial setup.  
If a different operating system is installed on your Tablet PC, you must calibrate it with  
your ngers before rst use, so that it recognizes your ngertips as accurately as possible.  
As soon as you ascertain that the accuracy is deteriorating, you  
must recalibrate the device.  
Operating system  
Menu  
Windows 8.1 Desktop To calibrate, run the Hardware and Sound / Tablet PC Settings function in the  
Control Panel. You need to calibrate both portrait and landscape formats.  
Fujitsu  
25  
         
Working with the Tablet PC  
Actions with one nger (Windows 8.1 Modern)  
Action  
Description  
Wipe your nger over the screen from the  
right-hand edge.  
Open Charms with system commands  
(equivalent to pressing the Windows button +  
C
button).  
Working with the mouse: Position the mouse  
pointer at the bottom right-hand edge of the  
screen.  
Wipe your nger over the screen from the  
left-hand edge.  
Switch between the most recently used  
applications (equivalent to pressing the  
Ctrl  
Windows button +  
+ Space).  
Working with the mouse: Position the mouse  
pointer at the bottom left-hand edge of the  
screen.  
Wipe your nger over the screen from the top  
or bottom edge.  
Open the App commands (equivalent to  
Z
pressing the Windows button +  
button).  
Wipe from the top to the bottom of the screen  
to dock or close the current App.  
Working with the mouse: Right-click on the  
App to display the App commands.  
26  
Fujitsu  
 
Working with the Tablet PC  
Action  
Description  
Press and hold  
Keep your nger pressed on an object on the  
screen to display a menu with further options.  
Working with the mouse: Move the mouse  
pointer over the object to display a menu with  
further options.  
Tap on an object  
Tap your nger on an object on the screen  
to open an App or a link or to execute a  
command.  
Working with the mouse: Left-click on the  
object.  
Scroll / Move object / Swivel object  
Use this function to scroll through lists or  
websites or to swivel or move an object.  
Working with the mouse: Left-click on the  
object, keep the mouse button pressed and  
move / swivel the object or scroll.  
Fujitsu  
27  
Working with the Tablet PC  
Actions with one nger (Windows 8.1 Desktop)  
Action  
Description  
Selecting objects (click with the left mouse  
button)  
Tap once briey with the nger on the object.  
Starting programs (double-click with the left  
mouse button)  
Use one nger to tap twice in quick  
succession on the program symbol.  
Moving objects/windows (while holding the left  
mouse button pressed, drag & drop)  
Place your nger on the object/window,  
keep your ngertip pressed against  
the touchscreen and move the desired  
object/window.  
Opening a context menu (click with the right  
mouse button)  
Tap your nger on the desired item.  
Keep your ngertip pressed against the  
touchscreen.  
The context menu appears.  
Moving the cursor  
Position one nger on the touchscreen and  
move your ngers in the desired direction.  
28  
Fujitsu  
 
Working with the Tablet PC  
Actions with two ngers (Windows 8.1 Desktop)  
Action  
Description  
Scrolling  
or  
Place two ngers on the touchscreen.  
Move the ngers up to scroll up.  
Move the ngers down to scroll down.  
Rotating  
Position your thumb on the touchscreen and  
rotate the image clockwise or anticlockwise  
using your index nger.  
Fujitsu  
29  
 
Working with the Tablet PC  
Action  
Description  
Increase or decrease zoom  
Put two ngers on the touchscreen and  
move them apart to increase the size of the  
zoom.  
or  
Put two ngers on the touchscreen and  
move them together to decrease the size  
of the zoom/view.  
Lock context-sensitive menus  
Use two ngers to tap twice in quick  
succession on the touchscreen.  
30  
Fujitsu  
Working with the Tablet PC  
Using the stylus  
Stylus  
1 = stylus tip  
3
2 = stylus button (= right mouse button)  
3 = stylus tether attachment point  
2
1
You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items, and to  
navigate through the programs. Programs that support handwriting recognition also allow you to  
write directly on the screen with the stylus. You can also use the stylus as a drawing tool.  
The Tablet PC is supplied with a stylus tether which you can attach to the attachment  
points on the stylus and on the Tablet PC.  
Use only the stylus that was provided with your Tablet PC. Do not use any other pointed  
object as a substitute, that was not specially designed for your Tablet PC. Replace  
the stylus tip if it is worn. The warranty does not cover a scratched screen.  
While writing, take care that you do not scratch the surface of the  
display (e.g. with a wristwatch or bracelet).  
The stylus of the Tablet PC is an electronic instrument that can be damaged  
if used improperly. Handle the stylus with care.  
Our recommendations for proper handling of the stylus are as follows:  
Do not gesture with the stylus.  
Do not use the stylus as a pointer.  
Do not use the stylus on surfaces other than the screen of the Tablet PC.  
Do not try to turn the grip of the stylus. The grip is used to put the  
stylus into its slot and to take it out of its slot.  
Never store the stylus with its weight on the tip (e.g. with the tip down in a stylus  
container). If the stylus is stored with the tip pointing down, this may have an  
adverse effect on the stylus mechanism (particularly under high temperatures). In  
this case the stylus tip may react as though it is constantly being pressed down. To  
avoid damage, the stylus should be stored in the stylus slot when not in use.  
The stylus can be inuenced by electromagnetic elds (cursor quivers or  
jumps). There may be a few areas on the screen where the cursor quivers  
slightly in spite of pressing the stylus down rmly.  
The screen responds to entries made with the tip of the nger or the stylus when the  
tip of the nger or the stylus directly touches the screen.  
You can use the stylus to perform almost all functions for which you would otherwise use a mouse.  
Fujitsu  
31  
   
Working with the Tablet PC  
Delete functions are not supported by the stylus.  
Action  
Mouse  
Stylus  
Selecting menu  
items  
Click with the left mouse button.  
Tap on the menu entry with the tip of  
the stylus.  
Starting programs Double-click with the left mouse  
button.  
Tap on the program symbol twice in  
rapid succession using the stylus tip.  
Moving an object Drag with the left mouse button  
Place the stylus tip directly on the  
object or window. Keep the stylus tip  
held against the screen. Drag the  
desired object or window.  
or window  
pressed.  
Opening a context Click with the right mouse button.  
menu  
Tap on the desired element with the  
stylus and keep the stylus pressed  
against the screen.  
Moving the cursor Move the mouse  
Place the tip of the stylus directly on  
the screen.  
Stylus location  
On delivery, the stylus is located in the stylus  
holder:  
1
Adjusting the stylus  
Operating system  
Menu  
Windows 8.1  
Under Windows 8.1 Desktop - Control Panel - Hardware and Sound - Pen and  
Touch Input you can make various settings for the stylus (assignment  
and function of the stylus button).  
Calibrating the stylus  
If Windows 8.1 is installed on your Tablet PC, your Tablet PC is already calibrated at initial setup.  
If a different operating system is installed on your Tablet PC, you must calibrate it with the  
stylus before rst use, so that it recognizes the stylus as accurately as possible.  
You should also always repeat the calibration if the co-ordination between the  
stylus and the cursor movement deteriorates.  
Operating system  
Menu  
Windows 8.1 Desktop To calibrate, run the Hardware and Sound / Tablet PC Settings function in the  
Control Panel. You need to calibrate both portrait and landscape formats.  
32  
Fujitsu  
     
Working with the Tablet PC  
Replacing the stylus tip  
With use, the stylus tip may become worn or may pick up foreign particles that can scratch the screen.  
A damaged or worn tip may not move freely, causing unpredictable results when using the stylus.  
If your stylus exhibits these problems, replace the stylus tip. To do this, use the supplied tool (1).  
To remove the tip, position it in the gap  
between the two ends of the tool supplied.  
Pinch the two ends of the supplied tool  
together so that the tip is rmly clasped,  
then pull it from the barrel.  
Replace the tip with one of the new tips  
that were supplied with your stylus. Insert  
the at end of the tip into the barrel  
and exerting gentle pressure, push it  
in until it is rmly in place.  
1
If the tip is worn or damaged, discard it.  
Installing a stylus tether  
Attach the stylus with a stylus tether to prevent accidentally dropping it or losing it.  
Fasten the stylus tether to the attachment points on the stylus and the Tablet PC.  
Fujitsu  
33  
   
Working with the Tablet PC  
Tablet buttons  
Your Tablet PC is tted with three tablet buttons.  
Symbol Description  
Functions  
+
Volume + button  
Volume - button  
Shortcut button  
Increase volume  
Decrease the volume  
– – –  
Call the status area by pressing or start a screenshot  
function by a long press (depends on conguration)  
34  
Fujitsu  
 
Working with the Tablet PC  
Webcam  
Webcam  
Your device has two webcams: one on the front of the device and one on the rear.  
The webcam has its own status indicator. The indicator lights up when the webcam is active.  
Depending on the software used, you can use your webcam to take pictures,  
record video clips or take part in web chats.  
The picture quality depends on the lighting conditions and the software being used.  
You can only operate the webcam with a particular application (e.g. an Internet telephony  
program or a video conferencing program which supports a webcam).  
When using the webcam the support of the Tablet PC must not wobble.  
The webcam automatically adjusts itself to the current light level. For this reason,  
the touchscreen may icker while the light level is adjusted.  
Further information on use of the webcam and additional settings for your webcam  
can be found in the help function of the program using the webcam.  
Rechargeable battery  
SRBaetrctvehicra  
y
e
rgliefe  
a
,
b
b
laet  
b
te ttery  
a
r
y
The built-in battery provides the Tablet PC with the necessary power for use on the move.  
You can increase the service life of the battery by caring for the battery properly. The  
average battery service life is around 500 charge/discharge cycles.  
You can extend the battery service life by taking advantage of the available energy saving functions.  
Charging and maintaining the battery  
Battery  
The Tablet PC battery can only be charged when the ambient temperature is  
between 5°C / 41 °F and max. 35°C / 95°F.  
You can charge the battery by connecting the Tablet PC to the AC adapter  
If the battery is running low you will hear a warning alarm. If you do not connect the AC adapter  
within ve minutes of hearing the warning alarm, your Tablet PC will switch off automatically.  
Monitoring the battery state of charge  
Bba  
a
t
t
t
t
e
errychargemeter  
y
A battery symbol for monitoring the battery capacity is displayed in the system bar /  
status indicator. The battery symbol shows you the battery charge.  
Fujitsu  
35  
                   
Working with the Tablet PC  
Using the energy saving functions  
EBnaettregry  
The Tablet PC uses less power when the power management features are enabled. You will  
then be able to work longer when using the battery before having to recharge it.  
The energy efciency is increased and environmental pollution is reduced.  
By choosing the best power options, you can make signicant savings and  
at the same time help protect the environment.  
We recommend the following settings:  
Function  
Operating on AC power  
After 10 minutes  
Operating on battery power  
After 5 minutes  
Turn off display  
Turn off hard disk(s)  
Energy saving  
After 15 minutes  
After 10 minutes  
After 20 minutes  
After 15 minutes  
Set the energy saving functions in your Control Panel.  
Set the screen saver in your Control Panel.  
or  
Keep a nger pressed on the desktop to display the context menu. Congure the screen  
saver under Change screen saver.  
If you need further information about an option, you can get help with most settings by  
?
pressing the  
symbol in the upper right of the screen to open the Microsoft Help.  
When the Tablet PC is in an energy saving mode, you must remember the following:  
When the Tablet PC is in energy saving mode, open data is held in main  
memory or in a swap le on the hard disk.  
Never switch off the Tablet PC while it is in an energy saving mode. If the built-in battery  
is nearly drained, close all open les and do not go into energy saving mode.  
If you do not intend to use your Tablet PC for a long period of time:  
Exit the energy saving mode if necessary via touching the screen or by switching on the  
Tablet PC.  
Close all opened programs and completely shut down the Tablet PC.  
36  
Fujitsu  
     
Working with the Tablet PC  
Memory cards  
Slot  
Your Tablet PC is equipped with an integrated storage card reader. Use storage  
cards to enlarge the storage of your Tablet PC.  
Follow the manufacturer’s instructions when handling the memory cards.  
Memorycard  
Supported formats  
It supports the following formats:  
Micro Secure Digital (SDTM Card)  
Micro SDHC  
Micro SDXC  
Inserting the memory card  
2
1
Open the slot cover (1).  
Carefully slide the storage card into the slot (2). The label area must be facing upward. Do  
not apply any force, otherwise the delicate contact surfaces could be damaged.  
Memorycard  
Close the slot cover.  
Fujitsu  
37  
           
Working with the Tablet PC  
Removing the memory card  
Memorycard  
To avoid any loss of data, always follow the correct procedure for removing the  
card (see the documentation for your operating system).  
Open the slot cover.  
1
2
Pull the storage card out of the slot (1).  
Close the slot cover (2).  
38  
Fujitsu  
   
Working with the Tablet PC  
SIM card  
A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a cellular phone or Tablet  
PC and, together with an integrated UMTS/4G module, enables access to a cellular radio network.  
Follow the instructions supplied by the provider of the SIM card. If you do not feel the  
the SIM card engage as you insert it, use a pointed object to insert the SIM card.  
Please note that the SIM card format must be micro-SIM (3FF). Other SIM  
card formats, such as full-size (1FF), mini-SIM (2FF) or nano-SIM (4FF) do  
not t in the SIM card slot of your Tablet PC.  
Please do not insert any other format of SIM card as they may become  
twisted, they could even damage the system.  
Inserting a SIM card  
2
1
Open the slot cover (1).  
Carefully push the SIM card into the slot (2) until the SIM card clicks into place.  
The label area must be facing upward. Do not apply any force, otherwise the  
delicate contact surfaces could be damaged.  
Close the slot cover.  
Fujitsu  
39  
   
Working with the Tablet PC  
Removing a SIM card  
Open the slot cover.  
1
2
Pull the SIM card out of the slot (1).  
Close the slot cover (2).  
Wireless LAN/Bluetooth/UMTS/4G radio components  
The installation of radio components not approved by Fujitsu will invalidate  
the certications issued for this device.  
Switching the wireless components on and off  
The radio components are switched on and off using the appropriate functions of the operating system.  
To switch radio components on and off individually, select Settings – Change  
PC settings – Wireless – Wireless devices – Off.  
40  
Fujitsu  
     
Working with the Tablet PC  
Setting up WLAN access  
Requirement: A WLAN must be available and you must have the  
corresponding access information.  
Information on conguring the WLAN access can be found in the  
documentation for your operating system.  
Further information on WLAN and Bluetooth  
For further information about WLAN or Bluetooth, see the Appendix of this manual.  
For WLAN specications, see chapter "WLAN specications", Page 80.  
Access via UMTS  
If you ordered an integrated UMTS module with your system, you can enjoy optimum  
reception and maximum energy efciency without awkward cables or antennas. The  
optional UMTS module is ready for use immediately.  
You will nd information on establishing the connection with the UMTS network  
in the documentation for the hardware used.  
Your device can connect to the Internet via UMTS. To do this, use one of  
the following types of connection:  
Integrated UMTS module (availability dependent on your conguration)  
a USB dongle (a USB stick with your mobile phone provider’s SIM card)  
a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)  
Access via Wireless WAN  
You can purchase the accessories for Wireless WAN reception from your Fujitsu dealer.  
If you have ordered a Wireless WAN module, your device will already  
be prepared when you receive it.  
You will nd information on establishing the connection with the Wireless WAN  
network in the documentation for the hardware you plan to use.  
Fujitsu  
41  
       
Working with the Tablet PC  
Ethernet and LAN (only with docking cradle)  
EthernetLAN  
The internal network module of your Tablet PC supports Ethernet LAN. You can use it to  
establish a connection to a local network (LAN = Local Area Network).  
Connect the network cable to the LAN  
port of the cradle (1).  
Connect the network cable to your  
network connection (2).  
1
2
Your network administrator can help you to congure and use the LAN connections.  
The network cable is not included in the delivery scope. This type of  
cable can be obtained from a specialist dealer.  
GPS  
GPS  
Whether your device has this function depends on the chosen equipment level.  
42  
Fujitsu  
       
Accessories for your Tablet PC (optional)  
Accessories for your Tablet PC (optional)  
The following accessories are available for your Tablet PC:  
Docking cradle for charging the Tablet PC with additional ports  
Keyboard cover  
VESA mount  
Shoulder strap  
Folio case  
Micro USB adapter cables  
The following sections provide more information on handling the accessories.  
Your docking cradle (optional)  
As well as fast charging, your docking cradle is a device that also allows you to quickly connect  
your Tablet PC to your peripherals such as a monitor, keyboard, mouse, etc. You only need  
to dock the Tablet PC to be able to work with your peripheral devices.  
Docking cradle components  
PCorartdsle  
1
3
3
4
2
5
7
6
1
= Connector on the cradle for the docking  
port of the Tablet PC  
5
6
7
= HDMI  
= LAN port  
= DC jack socket (DC IN)  
2
3
4
= USB port 2.0  
= USB port 2.0  
= VGA monitor port  
Fujitsu  
43  
         
Accessories for your Tablet PC (optional)  
Setting up the cradle  
Select a suitable location for the cradle before setting it up. In doing  
so, please follow these instructions:  
Place the cradle on a at, stable, non-slippery surface.  
Never place the cradle or the AC adapter on a heat-sensitive surface.  
Do not expose the cradle to extreme environmental conditions.  
Protect the cradle from dust, moisture and heat.  
Connecting the Tablet PC to the cradle  
It is possible to connect the Tablet PC to the cradle while it is running. To prevent  
problems, we recommend that you switch the Tablet PC off rst.  
Disconnect the AC adapter from the Tablet PC before connecting  
the Tablet PC to the cradle.  
When the Tablet PC is connected to the cradle, you must connect  
the AC adapter to the cradle.  
Information for using the docking cradle:  
If your Tablet PC is connected to the docking cradle, the micro USB port of the  
Tablet PC cannot be used. Use the alternative ports of the cradle.  
The HDMI and VGA ports of the docking cradle cannot be used at the same time. If  
devices are connected to both ports, only the device at the HDMI port can be used.  
The maximum supported resolution for VGA/HDMI is 1920 x 1080 pixels.  
Cradle  
Switch the Tablet PC off.  
Remove the AC plug of the AC adapter from the power outlet.  
Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.  
44  
Fujitsu  
     
Accessories for your Tablet PC (optional)  
2
1
4
3
Position the Tablet PC so that it lies against the storage surface of the cradle.  
Push the Tablet PC on to the cradle in the direction of the arrow (1) until  
you feel it engage on the connector.  
Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2).  
Connect the AC cable to the AC adapter (3).  
Plug the AC cable into the power outlet (4).  
Fujitsu  
45  
Accessories for your Tablet PC (optional)  
Disconnecting the Tablet PC from the cradle  
It is possible to separate the Tablet PC from the cradle while it is running. However,  
to prevent any problems, we recommend that you switch the Tablet PC off rst or that  
you execute the appropriate undocking function provided by the operating system.  
Switch the Tablet PC off.  
1
While holding down the lower part of the cradle, lift the Tablet PC from  
the cradle in the direction of the arrow (1).  
46  
Fujitsu  
 
Accessories for your Tablet PC (optional)  
Keyboard cover (optional)  
The keyboard cover is an optimized device for the convenient input of text. It  
only needs to be docked with the Tablet PC.  
Keyboard cover ports  
kPeoyrbsoardcover  
1
2
3
4
1
2
3
= Release button  
4
= Status indicators (Num Lock, Caps  
Lock, Scroll Lock)  
= Sliding foot (pulled out)  
= Connector for the docking port of  
the Tablet PC  
Fujitsu  
47  
       
Accessories for your Tablet PC (optional)  
Connecting the Tablet PC to the keyboard cover  
keyboardcover  
Position the keyboard cover on a at, even surface.  
2
1
3
1
To avoid toppling of the Tablet PC and resulting damage, always pull out  
the sliding foot when using the keyboard cover.  
Fully pull out the sliding foot cover (1).  
Press the release button (2) until it rmly remains in pressed position (red marking visible).  
Push the Tablet PC on to the keyboard cover in the direction of the arrow  
until you feel it engage on the connector (3).  
48  
Fujitsu  
   
Accessories for your Tablet PC (optional)  
Separating the Tablet PC from the keyboard cover  
1
2
Press and hold the release button on the keyboard cover (1).  
Lift the Tablet PC away from the keyboard cover in the direction of the arrow (2).  
Fujitsu  
49  
 
Accessories for your Tablet PC (optional)  
VESA mount (optional)  
Use the VESA mount to secure the Tablet PC to a mount with the appropriate screw holes.  
When you attach the screws, use the correct tool and the correct tool size.  
Keep the screws out of the reach of children.  
1
1
1
3
1
3
2
3
3
Remove the four screws (1).  
Position the VESA mount on the Tablet PC (2). Make sure that the screw holes of the  
VESA mount and of the Tablet PC lie exactly on top of each other.  
Secure the VESA mount using the screws (3).  
50  
Fujitsu  
 
Accessories for your Tablet PC (optional)  
Shoulder strap (optional)  
When you attach the screws, use the correct tool and the correct tool size.  
Keep the screws and mounts out of the reach of children.  
Do not use a motorized screw-driver so as to not damage the screws.  
1
1
3
2
3
2
Remove the screws (1).  
Position the ttings (2).  
Secure the ttings using the screws (3).  
Fujitsu  
51  
 
Accessories for your Tablet PC (optional)  
Secure the shoulder strap to the ttings.  
52  
Fujitsu  
Accessories for your Tablet PC (optional)  
Folio case (optional)  
The folio case contains magnets. Keep away from objects that may be  
easily affected by the inuence of magnetism.  
LCD may be accidently turned on if the cover is not properly closed.  
Make sure the unit is rmly tted into the folio case fasteners so it will not fall out.  
This folio case is only designed to contain and carry this unit.  
Do not use it for any other purpose.  
Do not put the folio case in a direct sunlight or expose to high  
temperature and humidity.  
Position the Tablet PC on the folio case as shown.  
Engage the top edge and then press it down.  
The following illustration shows you the many ways in which the folio case can be used:  
Fujitsu  
53  
 
Accessories for your Tablet PC (optional)  
Micro USB adapters  
5 USB adapters are available for the device:  
Micro USB to USB adapter  
Micro USB to HDMI adapter  
Micro USB to VGA adapter  
54  
Fujitsu  
 
Accessories for your Tablet PC (optional)  
Micro USB to Display Port adapter  
Micro USB to LAN adapter  
For technical specications, see chapter "USB adapters", Page 83.  
Fujitsu  
55  
Security functions  
Security functions  
Securityfunctions  
Your Tablet PC has several security features that you can use to secure your system  
and your personal data from unauthorized access.  
This chapter explains how to use these functions, and what the benets are.  
Please remember that in some cases, for example, forgetting your password,  
you may be locked out of the system and unable to access your data.  
Therefore, please note the following information:  
Back up your data on external data carriers at regular intervals.  
Some security functions need you to choose passwords. Make a note  
of the passwords and keep them in a safe place.  
If you forget your passwords you will need to contact our Service Desk.  
Deletion or resetting of passwords are not covered by your warranty  
and a charge will be made for assistance.  
56  
Fujitsu  
   
Security functions  
Conguring the ngerprint sensor  
Fingerprintsensor  
The ngerprint sensor can record the image of a ngerprint. With additional ngerprint  
software, this image can be processed and used instead of a password.  
1
1
Install the ngerprint software to be able to use the ngerprint sensor (1).  
Fujitsu  
57  
     
Security functions  
Conguring password protection in BIOS Setup Utility  
Before using the various options for password protection in the BIOS Setup  
Utility, please proceed as follows to increase data security:  
Make a note of the passwords and keep them in a safe place. If you forget your supervisor  
HDD password you will not be able to access your Tablet PC. Deletion of passwords is  
not covered by your warranty and a charge will therefore be made for assistance.  
Passwordprotection  
Your password can be up to eight characters long and can contain letters and  
numbers. No distinction is made between uppercase and lowercase.  
Protecting BIOS Setup Utility (supervisor HDD password  
and user HDD password)  
If you have opened these operating instructions on the screen, we recommend  
that you print them out. You cannot call up the instructions on the screen  
while you are setting up the password.  
BIOSSetupUtility  
The supervisor HDD password and the user HDD password both prevent unauthorized use of the  
BIOS Setup Utility. The supervisor HDD password allows you to access all of the functions of the BIOS  
Setup Utility, while the user HDD password will only give you access to some of the functions. You  
can only set a user HDD password when a supervisor HDD password has already been assigned.  
Calling and using the BIOS Setup Utility is described in the chapter  
Assigning the supervisor and user passwords  
Start the BIOS Setup Utility and go to the Security menu.  
Select the Set Supervisor Password eld and press the Enter key.  
With Enter new Password: you are asked to enter a password.  
Enter the password and press the Enter key.  
Conrm new Password requires you to conrm the password.  
Enter the password again and press the Enter key.  
Changes have been saved is displayed as a conrmation that the new password has been saved.  
To set the user password, select Set User Password and proceed exactly as  
when conguring the supervisor password.  
If you do not want to change any other settings, you can exit BIOS Setup Utility.  
In the Exit menu, select the option Save Changes & Exit.  
Select Yes and press the Enter key.  
PSUausspeserpwrvaoisrsdo  
wr  
pardssword  
o
The Tablet PC is rebooted and the new password is effective. It will now be necessary to  
rst enter your supervisor or user password in order to open the BIOS Setup Utility. Please  
note that the user password only provides access to a few of the BIOS settings.  
58  
Fujitsu  
             
Security functions  
Changing the supervisor HDD password or user HDD password  
You can only change the supervisor HDD password when you have logged into the  
BIOS Setup Utility with the supervisor HDD password.  
PSUausspeserHwrvDoisrDdoprHasD  
s
D
w
p
ordssword  
a
Start the BIOS Setup Utility and go to the Security menu.  
When changing the password, proceed exactly as when assigning a password.  
Removing passwords  
To remove a password (without setting a new password) perform the following steps:  
PSUausspeserpwrva  
o
i
s
srsdo  
w
rpordssword  
a
Start the BIOS Setup Utility and go to the Security menu.  
Highlight the Set Supervisor Password or Set User Password eld and press the Enter key.  
You will be requested to enter the current password by the Enter Current Password prompt.  
Enter New Password will appear and you will be requested to enter a new password.  
Press the Enter key twice at this request.  
In the Exit menu, select the option Save Changes & Exit.  
Select Yes and press the Enter key.  
The Tablet PC is rebooted and the password is removed.  
Removing the supervisor password simultaneously deactivates the user password.  
Password protection for booting the operating system  
You can also prevent booting of the operating system with the supervisor  
HDD password you have set in the BIOS Setup Utility (see section "Assigning  
Operatingsystem  
Activating system protection  
Start the BIOS Setup Utility and go to the Security menu.  
Operatingsystem  
Select the Password on Boot option and press the Enter key.  
Select the option you require (Disabled, First Boot or Every Boot) and press the enter key  
Select the Save Changes & Exit option under Exit.  
The Tablet PC reboots. You will be prompted to enter your password (the supervisor password).  
Deactivating system protection  
Start the BIOS Setup Utility and go to the Security menu.  
Operatingsystem  
Select the Password on Boot option and press the Enter key.  
Select the Disabled option and press the Enter key.  
If you do not want to change any other settings, you can exit BIOS Setup Utility.  
Select the Save Changes & Exit option under Exit.  
The Tablet PC reboots. The system is no longer password-protected.  
Fujitsu  
59  
               
Security functions  
Password protection for the hard disk  
Passwordprotection  
The hard disk password prevents unauthorized access to the hard disk drives  
and is checked internally each time the system is booted. The condition for this  
is that you have assigned at least the supervisor HDD password.  
Activating hard disk protection  
Call up the BIOS Setup and select the Security menu.  
If you have not assigned BIOS passwords yet, dene the supervisor and the user  
password now, if desired (see "Security functions", Page 56).  
Mark the Hard Disk Security eld and press the Enter key.  
In the area Drive0, mark the eld Set Master Password and press the Enter key.  
Enter new Password then appears and you are asked to enter a password.  
Enter the password and press the Enter key.  
Conrm new Password requires you to conrm the password.  
Enter the password again and press the Enter key.  
With Setup Notice: Changes have been saved you receive conrmation that  
the new password has been saved.  
If you wish to enter a password for a second hard disk (Drive1), in the area  
Drive1 mark the eld Set Master Password and proceed in exactly the same way  
as for the set up of the rst hard disk (Drive0).  
The eld Password Entry on Boot is set to Enabled by default. You can exit the BIOS  
Setup once you have nished changing the settings.  
From the Exit menu, choose the option Exit Saving Changes.  
Press the Enter key and select Yes.  
The Tablet PC reboots and your hard disk is now protected with a password. The  
password prompt is enabled as soon as the Tablet PC has rebooted.  
Deactivating hard disk protection  
To cancel a password (without setting a new password) proceed as follows:  
Call up the BIOS Setup and select the Security menu.  
Mark the Hard Disk Security eld and press the Enter key.  
In the area Drive0, mark the eld Set Master Password and press the Enter key.  
With the prompt Enter current Password you are rst asked to enter the old password again.  
With Enter new Password you are then prompted to enter a new password.  
After the request, press the Enter key three times.  
From the Exit menu, choose the option Exit Saving Changes.  
Press the Enter key and select Yes.  
The Tablet PC reboots and there is no longer any password protection for this hard disk.  
If you wish to remove a password for a second hard disk (Drive1), in the area  
Drive1 mark the eld Set Master Password and proceed in exactly the same way  
as for the removal of the rst hard disk (Drive0).  
60  
Fujitsu  
   
Security functions  
SmartCard reader (optional)  
Securityfunctions  
SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with  
the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.  
With the appropriate software you can use your SmartCard as an alternative to password protection,  
but also as a digital signature, for encrypting your e-mails or for home banking.  
We recommend that you always use two SmartCards. Always keep one of the SmartCards  
in a safe place if you are carrying the other SmartCard with you.  
In order to be able to take advantage of all the security features of your Tablet  
PC, you will need a CardOS SmartCard from Fujitsu.  
The SmartCard can only be used with a PIN, so maximum protection is maintained  
even when the SmartCard is lost. In order to maximize your security, the CardOS  
SmartCard is disabled if three incorrect attempts are made to enter the PIN.  
During rst time use of your CardOS SmartCard, you must either enter the preset PIN  
"12345678" or the PIN which has been notied to you by your system administrator.  
Inserting the SmartCard  
Do not use force when inserting and removing the SmartCard.  
Make sure that foreign objects do not fall into the SmartCard reader.  
Turn the Tablet PC over.  
Push the SmartCard into the SmartCard reader with the chip facing downwards.  
Fujitsu  
61  
       
Security functions  
Trusted Platform Module - TPM (device dependent)  
TrPuMstedPlatformModule  
To use the TPM, you must enable the TPM in the BIOS Setup before the software is  
installed. The requirement for this is that you have assigned at least the supervisor  
HDD password (see "Security functions", Page 56).  
Enabling TPM  
Requirement: You have assigned a supervisor HDD password (see "Security functions", Page 56).  
Call BIOS Setup and select the Security menu.  
Mark the TPM Security Chip Setting eld and press the Enter key.  
Select the entry Enabled to enable the TPM  
Once you have enabled the TPM the Clear Security Chip menu item appears.  
You can clear the holder in the TPM using Clear Security Chip. With Enabled,  
all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys  
etc.) generated by applications are deleted.  
Take note that you can then no longer access the data you have  
encrypted on the holder-based keys!  
Select the Exit Saving Changes option in the Exit menu.  
Press the Enter key and select Yes.  
The Tablet PC restarts and the TPM is enabled after the reboot.  
Disabling TPM  
Requirement: You have assigned a supervisor HDD password (see "Security functions", Page 56).  
Call BIOS Setup and select the Security menu.  
Mark the TPM Security Chip Setting eld and press the Enter key.  
Select the entry Disabled to disable the TPM.  
From the Exit menu, choose the option Exit Saving Changes.  
Press the Enter key and select Yes.  
The Tablet PC is rebooted and the TPM is disabled.  
62  
Fujitsu  
         
Connecting external devices  
Connecting external devices  
Under all circumstances, please observe the safety notes provided in the  
"Important notes", Page 12 chapter before connecting or disconnecting  
any devices to or from your Tablet PC.  
Always read the documentation supplied with the device you wish to connect.  
Never connect or disconnect cables during a thunderstorm.  
Never pull at a cable when disconnecting it. Always grasp the plug.  
Follow the order described below when you connect external devices to  
the Tablet PC or separate them from it:  
With some devices, such as USB devices, it is not necessary to switch off  
the Tablet PC and the device before connecting/disconnecting. For more  
information about whether or not devices need to be switched off, please refer  
to the documentation supplied with your external device.  
Some of the external devices require special drivers (see the operating  
system and external device documentation).  
Connecting devices to the Tablet PC (or to the docking cradle)  
1. Switch off the Tablet PC and all the external devices.  
2. Disconnect the AC plugs for the Tablet PC and all the affected devices from the power outlets.  
3. Connect the cables for all the external devices according to the instructions.  
4. Plug all the AC plugs into the power outlets.  
DPerviip  
c
h
e
er,als,  
s
Disconnecting devices from the Tablet PC (or from the docking cradle)  
1. Switch off the Tablet PC and all the external devices.  
2. Disconnect the AC plugs for the Tablet PC and all the affected devices from the power outlets.  
3. Disconnect the cables for all the external devices following the instructions.  
DPerviip  
c
h
e
er,als,  
s
Fujitsu  
63  
         
Connecting external devices  
Connecting an external monitor  
HDMI port (via optional docking cradle)  
HDMIport  
The HDMI port of the docking cradle can be used to connect an external amplier,  
LCD TV or a plasma TV with an HDMI connection.  
Connect the data cable to the  
external device.  
Connect the data cable to the HDMI port.  
Some LCD televisions have only two speakers/speaker ports and therefore  
cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you  
must change the HDMI sound settings accordingly.  
You can nd the settings under Control Panel - Hardware and Sound. Deactivate the  
settings for DTS Audio and Dolby Digital to enable playback of HDMI sound.  
VGA monitor port (via optional docking cradle)  
An analog monitor is connected to the analog VGA monitor port. Screen output is  
limited to a maximum of two screens at the same time.  
VSMcGo  
r
nAe  
i
e
tp  
o
n
o
r
crct  
o
o
n
n
n
n
e
e
c
c
t
tiio  
on  
n
Switch off the Tablet PC and the  
external monitor.  
Plug the data cable of the external  
monitor into the monitor port.  
First switch on the external monitor and  
then switch on the Tablet PC.  
You can also switch back and forth between the external monitor and the LCD  
screen of the Tablet PC, see "Touchscreen", Page 24.  
You can display the same image on the external monitor and on the LCD  
screen of the Tablet PC at the same time.  
64  
Fujitsu  
           
Connecting external devices  
Connecting USB devices  
USBports  
With the USB ports you can connect external devices that also have a USB port  
(e.g. a DVD drive, a printer, a scanner or a modem).  
USB devices are hot-swappable. This means you can connect and disconnect the  
cables of USB devices while the operating system is running.  
USB 1.x has a maximum data transfer rate of 12 Mbps.  
USB 2.0 has a data transfer rate of up to 480 Mbps.  
USB 3.0 has a data transfer rate of up to 5 Gbps.  
Additional information can be found in the documentation for the USB devices.  
+
Connect the data cable to the external device.  
Connect the data cable to a USB port (Tablet PC or docking cradle) or  
micro USB port (only on Tablet PC).  
Device drivers  
USB devices will be automatically recognized and installed by your operating system.  
For optional micro USB accessories (cables), see chapter "Micro USB adapters", Page 54.  
How to remove USB devices correctly  
Always correctly remove the device according to the rules described below,  
to ensure that none of your data is lost.  
Tap the symbol for safe removal of the hardware.  
Select the device you wish to shut down and remove.  
Tap OK.  
Wait for the dialog box which tells you that it is now safe to remove the device.  
Fujitsu  
65  
     
Connecting external devices  
Headphones port  
ACuodnin  
o
e
c
c
otnin  
n
g
e
ah  
c
uetidaoidnops  
d
h
e
o
v
n
icess  
e
You can connect either headphones or external speakers to your Tablet PC via the headphone port.  
Connect the audio cable to the  
external device.  
Connect the audio cable to the headphone  
port of the Tablet PC.  
The internal speakers are disabled.  
If you buy a cable from a retailer, please note the following information:  
The headphone port on your Tablet PC is a "3.5 mm jack socket".  
If you want to connect headphones or speakers you will need a "3.5 mm jack plug".  
66  
Fujitsu  
     
Settings in BIOS Setup Utility  
Settings in BIOS Setup Utility  
BSCeIyoOstn  
u
tSfi  
e
p
g
Sm  
u
e
srtaienu  
t
tpgit  
o
i
Ushn  
n
yagt  
,
isrBslidtt,IeywBO  
m
aI  
S
OrSe  
S
e
StueptuUtUilityility  
p
To navigate more easily in the BIOS Setup Utility, you can use the optional  
Keyboard Cover accessory, an external USB keyboard, and keep the  
volume button pressed during the boot process.  
The BIOS Setup Utility allows you to set the system functions and the hardware  
conguration for the Tablet PC.  
When the Tablet PC is delivered, the default settings are effective. You can change  
these settings in the menus of the BIOS Setup Utility. Any changes you make take  
effect as soon as you save and exit the BIOS Setup Utility.  
The BIOS Setup Utility program contains the following menus:  
About  
Displays information relating to the BIOS, processor and Tablet PC  
Advanced system settings  
System  
Advanced  
Conguration of various hardware components, such as mouse, keyboard,  
processor  
Security  
Boot  
Password settings and security functions  
Conguration of the start-up sequence  
Exits the BIOS Setup Utility  
Exit  
Starting the BIOS Setup Utility  
Keep the "Lock screen orientation" tablet button pressed and switch the Tablet PC on.  
BIOSSetupUtility  
If a password has been assigned, enter the password and press the Enter key.  
If you have forgotten the password, contact your system administrator  
or contact our customer service centre.  
The BIOS Setup Utility starts.  
Fujitsu  
67  
         
Settings in BIOS Setup Utility  
BIOS Setup Utility operation  
BIOSSetupUtility  
F1  
Press the  
key to display help about operation of the BIOS Setup Utility. The description  
of the individual settings is shown in the right-hand window of the BIOS Setup Utility.  
F9  
With the  
key you can load the default settings of the BIOS Setup Utility.  
Use the cursor keys  
or  
to select the menu you wish to access to make changes.  
The menu is displayed on the screen.  
Select the option you want to change with the cursor keys  
Press the "Enter" key.  
or  
.
ESC  
Press the  
key to exit the selected menu.  
For future reference, make a note of the changes you have made (for example, in this manual).  
Exiting BIOS Setup Utility  
BIOSSetupUtility  
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:  
Exit Saving Changes - save changes and exit BIOS Setup Utility  
To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.  
The Tablet PC is rebooted and the new settings come into effect.  
Exit Discarding Changes - Reject changes and  
exit BIOS Setup Utility  
To discard the changes, select Exit Discarding Changes and Yes.  
The settings which were valid when BIOS Setup Utility was called remain effective.  
The BIOS Setup Utility ends and the Tablet PC is rebooted.  
Load Setup Defaults – load default values  
To copy the standard entries for all menus of the BIOS Setup Utility,  
choose Load Setup Defaults and Yes.  
68  
Fujitsu  
             
Settings in BIOS Setup Utility  
Discard Changes - Discard Changes without  
exiting BIOS Setup Utility  
To discard the changes you have made, select Discard Changes and Yes.  
The settings in place when BIOS Setup Utility was called remain effective.  
You can now make additional settings in the BIOS Setup Utility.  
If you want to exit the BIOS Setup Utility with these settings, select Exit Saving Changes and Yes.  
Save Changes - save changes without exiting  
the BIOS Setup Utility  
To save the changes, select Save Changes and Yes.  
The changes are saved. You can now make additional settings in the BIOS Setup Utility.  
If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.  
Save changes and power off  
To save the changes and switch off your device, select Save Changes and Power Off and Yes.  
The changes are saved. Your device is shut down.  
Fujitsu  
69  
     
Troubleshooting and tips  
Troubleshooting and tips  
FTiraoultbleshooting  
p
u
s
If a fault occurs, try to correct it as described. If you are unable to correct  
the problem, proceed as follows:  
Make a note of the steps and the circumstances that led to the fault. Also  
make a note of any error messages displayed.  
Switch the Tablet PC off.  
Please contact the Hotline/Service Desk.  
You can contact Fujitsu Service and Support in the following ways:  
Toll free number: 1-800-Fujitsu (1-800-838-5487)  
Please have the following information ready when you call:  
The model name and serial number of the Tablet PC. The serial number  
is located on a sticker on the underside of the Tablet PC.  
Notes of any messages that appear on the screen and information on acoustic signals.  
Any changes you have made to the hardware or software since  
receiving the Tablet PC.  
Any changes you have made to the BIOS Setup settings since receiving the Tablet PC.  
Your system conguration and all peripheral devices connected to your system.  
Your sales contract.  
Our Tablet PCs have been designed primarily with mobile applications in mind.  
This means that considerable effort has been made to optimize components and  
equipment in terms of weight, space and energy requirements. Depending on the  
particular conguration you have purchased, it is possible that functionality may be  
slightly reduced compared to a desktop PC if you are running processor-intensive  
gaming software, e.g. games with intensive 3D graphics. Updating your hardware with  
drivers which have not been approved by Fujitsu may result in performance losses,  
data losses or malfunction of the equipment. A list of approved drivers and current  
BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"  
Help if problems occur  
Should you encounter a problem with your computer that you cannot resolve yourself:  
Note the ID number of your device. The ID number is found on the type rating  
plate on the back or underside of the casing.  
For further clarication of the problem, contact the Fujitsu Service Desk. When you do  
this, please have ready the ID number and serial number of your system.  
Recovering your Factory Image  
HOFaapcredtrodaritysin  
I
k
m
g
:
sa stem,recovering  
y
g
e
In the event you need to restore your original Factory Image refer to the  
steps in the Appendix of this manual..  
70  
Fujitsu  
           
Troubleshooting and tips  
The Tablet PC’s date or time is incorrect  
SITWDCniuhamcirnmato  
e
t
rnemgnrgreioentdcittmrgatct  
t
btoioiememar/rectikm-tuepbattery  
e
c
t
Cause  
Troubleshooting  
Time and date are wrongly set.  
With the BIOS-Setup-Utility, you can set the  
date and time in the Main menu.  
Date and time are still set incorrectly after  
switching on the Tablet PC.  
Please contact your sales outlet or our  
hotline/service desk.  
Battery indicator does not illuminate  
Cause  
Troubleshooting  
The battery is discharged.  
Charge the battery.  
or  
Connect the Tablet PC to a power outlet  
using the AC adapter.  
The Tablet PC’s touchscreen remains dark  
Tdoaurk  
c
t
h
o
s
u
c
c
rhescreen  
e
n
Cause  
Troubleshooting  
Touchscreen is switched off.  
Press a key (external keyboard) or tap on  
the touchscreen.  
External monitor or television set connected.  
Check whether the graphics driver settings  
are correct or whether an external monitor  
has been detected in "Intel Graphics Media  
Accelerator Driver for mobile".  
The display on the Tablet PC’s touchscreen  
is difcult to read.  
Tu chsc rn  
Cause  
Troubleshooting  
Reected glare  
Move the Tablet PC into a different position.  
Increase the brightness of the screen.  
Fujitsu  
71  
                   
Troubleshooting and tips  
The external monitor remains blank  
Monitor  
Cause  
Troubleshooting  
Monitor is switched off.  
Switch the external monitor on.  
Power saving has been activated (monitor is  
blank).  
Press a key (external keyboard) or tap on  
the touchscreen.  
Brightness is set to dark.  
Adjust the brightness of the monitor.  
Screen output is set to the Tablet PC  
touchscreen.  
Check whether the graphics driver settings  
are correct or whether an external monitor  
has been detected in "Intel Graphics Media  
Accelerator Driver for mobile".  
The external monitor’s AC cable or data cable is  
not connected properly.  
Switch off the Tablet PC and the external  
monitor.  
Check whether the AC cable is plugged  
properly into the external monitor and into  
the power outlet.  
Check that the data cable is properly  
connected to the Tablet PC and the external  
monitor (if it is plugged in with a connector).  
Switch on the external monitor and the  
Tablet PC.  
The external monitor is blank or the image is unstable  
onitor  
Cause  
Troubleshooting  
The wrong external monitor has been selected  
or the wrong screen resolution has been set for  
the application program.  
Terminate the application program in  
Windows. If the error persists after  
terminating the program, use the key  
combination for switching the screen output  
in order to switch to the touchscreen of the  
Tablet PC. Change the following setting:  
Set the screen resolution: Set the screen  
resolution as described in the documentation  
for your operating system.  
Select monitor: Select monitor 1 or 2 as  
described in the documentation for your  
operating system.  
The cursor does not correctly follow the  
stylus movements  
Cause  
Troubleshooting  
Stylus incorrectly calibrated.  
Calibrate the stylus as described in chapters  
72  
Fujitsu  
           
Troubleshooting and tips  
Stylus input not working  
Cause  
Troubleshooting  
Reinstall the driver for the "Dual Digitizer".  
Incorrect driver installed.  
The Tablet PC does not start after switch on  
TbletPC  
Cause  
Troubleshooting  
The battery is discharged.  
Charge the battery.  
or  
Connect the AC adapter to the Tablet  
PC.  
The AC adapter is not properly connected.  
Check whether the AC adapter is properly  
connected to the Tablet PC.  
Switch the Tablet PC on.  
The Tablet PC stops working  
TE  
b
d
l
ietPC  
g
Cause  
Troubleshooting  
The Tablet PC is in energy saving mode.  
End energy saving mode.  
An application program has caused the  
malfunction.  
Close the application program or restart  
the Tablet PC (by restarting the operating  
system or switching the device off and back  
on again).  
The battery is discharged.  
Charge the battery.  
or  
Connect the AC adapter to the Tablet  
PC.  
The printer does not print  
interdoesnotprint  
Cause  
Troubleshooting  
The printer is not switched on.  
Make sure that the printer is switched  
on and ready for operation (refer to the  
documentation supplied with the printer).  
The printer is not connected correctly.  
Check that the data cable between the Tablet  
PC and the printer is properly connected.  
The printer driver is faulty or not correctly  
installed, or it is the wrong printer driver.  
Check that the data cable between the Tablet  
PC and the printer is properly connected.  
Check whether the correct printer driver is  
loaded (refer to the printer documentation).  
Fujitsu  
73  
               
Troubleshooting and tips  
The wireless connection to a network does not work  
Thewirelessconnectiontoanetworkdoesnotwork  
Cause  
Troubleshooting  
The wireless component is switched off.  
Switch the wireless component on (see  
The wireless component is switched on. Despite  
this, the wireless connection to a network does  
not work.  
Check whether the wireless connection is  
enabled by the software.  
Further information on using the wireless  
component can be found in the help les.  
The battery discharges too quickly  
attery  
Cause  
Troubleshooting  
The battery is either too hot or too cold. In this  
case the battery indicator ashes.  
Bring the Tablet PC up/down to a normal  
operating temperature again.  
If the operating time of the battery life is  
extremely short, the battery is probably too  
old. Replace the battery if necessary.  
You may have an application running that  
consumes a great deal of power due to frequent  
accessing of the hard disk or optical drive.  
Use the AC adapter whenever possible.  
The maximum brightness may have been set  
for the screen.  
Reduce the brightness of the screen to  
lower energy consumption: You will nd the  
setting under Control Panel – Hardware and  
Sounds – Windows Mobility Center.  
SmartCard reader is not recognized  
Cause  
Troubleshooting  
Chip card inserted incorrectly.  
Make sure you have inserted your  
SmartCard into the SmartCard reader with  
the chip facing upwards.  
Check whether the SmartCard you are using  
is supported. Your SmartCard must comply  
with the ISO standard 7816-1, -2, -3 and -4.  
SmartCard PIN forgotten  
Cause  
Troubleshooting  
PIN forgotten  
If you work in a network, contact your  
system administrator, who can unlock your  
Tablet PC using a supervisor PIN.  
74  
Fujitsu  
           
Troubleshooting and tips  
User and/or supervisor SmartCard lost  
Cause  
Troubleshooting  
User and/or supervisor SmartCard lost  
If you have lost your user SmartCard, you  
can continue working with the supervisor  
SmartCard and initialize a new user  
SmartCard or deactivate the SystemLock  
function.  
If you have lost the supervisor SmartCard,  
you can also continue working, but you no  
longer have all rights and cannot initialize  
another supervisor SmartCard.  
If you have lost both SmartCards, you  
cannot boot your system. Please contact our  
customer service center. You must provide  
proof of ownership for the device. The  
customer service center will then refer you  
to our service partner, who will unlock your  
device (for a charge).  
SmartCard lost  
Cause  
Troubleshooting  
SmartCard lost.  
If you work in a network, contact your  
system administrator, who can boot your  
Tablet PC with a supervisor SmartCard.  
Acoustic warning  
AEcrroorsicwrnings  
Cause  
Troubleshooting  
Charge the battery.  
A beep sounds every few seconds.  
The battery is almost at.  
Fujitsu  
75  
         
Troubleshooting and tips  
Error messages on the screen  
Errorsmessagesonthescreen  
This section describes the error messages generated by the BIOS Setup. Error messages displayed  
by the operating system or programs are described in the documentation for these programs.  
If the error message appears repeatedly despite troubleshooting measures,  
contact the place of purchase or our customer service center.  
Error message/cause  
Troubleshooting  
CMOS Battery Bad  
Contact your sales outlet or our customer  
service center.  
If the error message occurs repeatedly, the  
buffer battery in the Tablet PC is at.  
System CMOS checksum bad - Default conguration  
used  
Switch the Tablet PC off.  
Switch the Tablet PC on.  
The system conguration information is  
incorrect.  
Keep the volume button and the shortcut  
button pressed and switch the Tablet PC  
on. If you keep the volume button pressed  
during the boot process, you can switch into  
the BIOS Setup-  
In the BIOS Setup, select the Exit menu.  
Select the entry Load Setup Defaults.  
Select OK and press the Enter key.  
Extended memory failed at offset: xxxx Failing Bits:  
zzzz zzzz  
Contact your sales outlet or our customer  
service center.  
When testing the extended memory. an error  
has resulted at the address xxxx.  
Failure Fixed Disk n  
Start the BIOS Setup (Primary Master  
submenu) and select the correct settings.  
The settings of the hard disk drive are incorrect.  
Keyboard controller error  
Switch your Tablet PC off with the ON/OFF  
button.  
Wait 3 - 5 seconds and switch the Tablet PC  
on again.  
Keyboard error  
If you use an external keyboard:  
Check the connection and reboot the Tablet  
PC.  
nn Stuck key  
Make sure that no key is pressed.  
Operating system not found  
Check in the BIOS Setup whether your hard  
disk has been set correctly.  
Make sure that the operating system is  
installed on the corresponding drive.  
76  
Fujitsu  
     
Troubleshooting and tips  
Error message/cause  
Troubleshooting  
Alt  
Press <F1> to resume, <F2> to SETUP  
Press the  
tablet button to boot the  
operating system  
This error message appears if an error occurs  
during the self-test before starting the operating  
system.  
Keep the  
tablet button pressed  
and switch on the Tablet PC to access BIOS  
Setup.  
Real time clock error  
Contact your sales outlet or our customer  
service center.  
nnnnK Shadow RAM failed at offset: xxxx Failing  
Bits: zzzz  
Contact your sales outlet or our customer  
service center.  
System battery is dead - Replace and run SETUP  
System cache error - Cache disabled  
System timer error  
Contact your sales outlet or our customer  
service center.  
Contact your sales outlet or our customer  
service center.  
Contact your sales outlet or our customer  
service center.  
Fujitsu  
77  
Technical data  
Technical data  
Tablet PC  
General  
Processor  
Intel® BayTrail-T™ SoC, Quad Core Intel®  
Atom™ Processor Z3770 (2.4 GHz)  
Main memory (SO DIMM)  
Electrical data  
4GB DiMM onboard  
Safety regulations complied with  
Protection class  
CE  
II  
Maximum power consumption (when the Tablet 36 W  
PC is switched on, connected to the keyboard  
cover and the battery is charged):  
Touchscreen  
Size  
10.1" WQXGA Wide View TFT  
Screen resolution  
2560 x 1600 pixels/16 million colors  
12 levels  
Brightness control  
Technology  
Wide-View High-Bright Display with LED  
background lighting  
Digitizer and glass panel  
Cameras  
Dual digitizer with Glare touchscreen  
Front: HD camera  
Back: 8 megapixels, autofocus, mobile light  
Graphics card  
Chip  
Intel® HD graphics  
Maximum resolution of external display:  
Dimensions  
1920 x 1080 (1080p)  
Width x Depth x Height  
10.51 in. x 7.12 in. x .51 in.  
(267.0 x 180.8 x 9.9 mm / 16.0 mm) (depending  
on the back shell)  
Weight depending on conguration  
Input devices  
Tablet buttons  
Stylus  
from 640 g / 1.31 lbs.  
3 keys  
Active stylus with a pressure button  
Slots  
Storage card slot  
SIM card slot  
1 x micro SD Card  
1 x micro SIM card  
Ports  
Headphones port  
Docking port  
3.5 mm stereo mini jack  
1 x  
USB (Universal Serial Bus)  
1 x USB 3.0, 1 x micro USB 2.0  
78  
Fujitsu  
   
Technical data  
Ambient conditions  
Environment class DIN IEC 721  
Mechanism class DIN IEC 721  
Operating temperature  
7K1  
7M2  
5 °C .... 35 °C / 41 °F .... 95 °F  
Transport temperature (2K2)  
–15 °C .... 60 °C / 5 °F .... 140 °F  
Fujitsu  
79  
Technical data  
WLAN specications  
Type of network  
Integrated Dual-Band Wireless-MITSUMI  
DWM-W095A device conforms to IEEE  
802.11a, 802.11b/g, and 802.11n, Wi-Fi  
based*.  
Transfer rate  
(Automatic switching) IEEE802.11 a and g:  
54 Mbps max. data rate; IEEE802.11n: 300  
Mbps max. data rate  
Active frequency  
802.11n: 2.4 GHz or 5 GHz  
802.11b/g: 2400~2473 MHz  
802.11a: 4900 ~ 5850 MHz  
Typical operating distances**  
802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.  
(91 m) @ 6 Mbps  
802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.  
(91 m) @ 1 Mbps  
802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.  
(91 m) @ 1 Mbps  
802.11n: Estimated double the operating  
distance of 802.11g and 802.11a in their  
respective frequencies.  
Number of channels  
802.11a: 8 independent channels  
802.11b/g: 11 channels, 3 non-overlapping  
channels  
802.11n: Channel bonding takes two of  
the non-overlapping 20MHz channels and  
combines it into one 40MHz channel. It is  
actually 12 non-overlapping channels with  
channel bonding and 24 without. Also, it is  
1 non-overlapping channel in 2.4GHz when  
channel bonding is used  
Security  
Encryption Types - WEP, TKIP, AES***, WPA 1.0  
and WPA 2.0 compliant  
Encryption Key lengths Supported: 64 bits and  
128 bits  
Maximum recommended number of computers 10 units or less ****  
to be connected over wireless LAN (during ad  
hoc connection)  
* “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the  
interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed.  
** The communication ranges shown above will increase or decrease depending on factors such  
as number of walls, reective material, or interference from external RF sources.  
*** Encryption with network key (WEP) is performed using the above number of bits, however,  
users can set 40 bits/ 104 bits after subtracting the xed length of 24 bits.  
**** Depending on practical environments, the allowable number of computers to be connected  
may be decreased.  
80  
Fujitsu  
 
Technical data  
Rechargeable battery  
You can nd information on the batteries used in your device on the  
3-cell lithium polymer battery 9900 mAh  
Rated voltage  
Rated capacity  
7.2 V  
38 Wh  
AC adapter (36 W)  
Tcniclda
Rated voltage  
12 V  
3 A  
Max. rated current  
An additional AC adapter or AC cable can be ordered at any time.  
Docking cradle (optional)  
Electrical data  
Safety regulations complied with  
Protection class  
CE  
II  
Ports  
HDMI  
1 x  
USB (Universal Serial Bus)  
Docking port  
3 x USB 2.0  
18-pin  
1 x  
VGA monitor port  
LAN port  
1 x  
Ambient conditions  
Environment class DIN IEC 721  
Mechanism class DIN IEC 721  
Operating temperature  
Transport temperature  
7K1  
7M2  
5 °C .... 35 °C / 41 °F .... 95 °F  
–15 °C .... 60 °C / 5 °F .... 140 °F  
Fujitsu  
81  
       
Technical data  
Keyboard cover (optional)  
Electrical data  
Safety regulations complied with  
Protection class  
CE  
II  
Ports  
Docking port  
18-pin  
Yes  
Touchpad  
Ambient conditions  
Environment class DIN IEC 721  
Mechanism class DIN IEC 721  
Operating temperature  
Transport temperature  
7K1  
7M2  
5 °C .... 35 °C / 41 °F .... 95 °F  
–15 °C .... 60 °C / 5 °F .... 140 °F  
VESA mount (optional)  
Dimensions  
Width x Depth x Height  
230 mm x 138 mm x 14.1 mm /  
9.06 in. x 5.43 in. x 0.56 in.  
Weight  
90 g / 0.198 bs.  
Shoulder strap (optional)  
Dimensions  
Width x Depth x Height  
49.80 in. x .98 in. x 0.189 in.  
(1265 mm x 25 mm x 4.8 mm)  
Weight  
Approx. 0.074 lbs. (33.4 g)  
Folio case (optional)  
Dimensions  
Width x Depth x Height  
18.11 in. x 10.75 in. x 0.63 in.  
(460 mm x 273 mm x 16 mm)  
Weight  
Approx. 0.86 lbs. (390 g)  
82  
Fujitsu  
       
Technical data  
USB adapters  
Adapter  
Length  
Max. resolution  
N/A  
Micro USB to USB adapter  
Micro USB to HDMI adapter  
Micro USB to VGA adapter  
6 inches  
6 inches  
6 inches  
6 inches  
1920 x 1080  
1920 x 1080  
1920 x 1080  
Micro USB to Display Port  
adapter  
Micro USB to LAN adapter  
6 inches  
N/A  
Fujitsu  
83  
 
Manufacturer’s notes  
Manufacturer’s notes  
Disposal and recycling  
Notes  
You can nd information on this subject on your Tablet PC or on our website  
Recycling your battery  
Over time, the batteries that run your mobile computer will begin to hold a charge for a  
shorter amount of time; this is a natural occurrence for all batteries. When this occurs,  
you may want to replace the battery with a fresh one*. If you replace it, it is important  
that you dispose of the old battery properly because batteries contain materials that  
could cause environmental damage if disposed of improperly.  
Fujitsu is very concerned with environmental protection, and has enlisted the services of the  
Rechargeable Battery Recycling Corporation (RBRC)**, a nonprot public service organization  
dedicated to protecting our environment by recycling old batteries at no cost to you.  
RBRC has drop-off points at tens of thousands of locations throughout the United States and  
Canada. To nd the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837.  
If there are no convenient RBRC locations near you, you can also go to the EIA Consumer  
Education Initiative website "http://EIAE.org/ " and search for a convenient disposal location.  
Remember – protecting the environment is a cooperative effort, and we must  
make every effort to protect it for current and future generations.  
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site  
at "www.shopfujitsu.com" in the US or "www.fujitsu.ca/products/notebooks" in Canada.  
** RBRC is an independent third party to which Fujitsu provides funding for  
battery recycling; RBRC is in no way afliated with Fujitsu.  
DOC (Industry CANADA) Notices  
DOC(INDUSTRYCANADA)NOTICES  
Radios and Television  
This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment  
Regulations.  
CET appareil numérique de la class B respecte toutes les exigence du Réglement  
sur le matérial brouilleur du Canada.  
84  
Fujitsu  
           
Manufacturer’s notes  
UL Notice  
IMPORTANT SAFETY INSTRUCTIONS  
This unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output rating  
of 12 VDC, with a minimum current of 3.0A (36W). The correct output rating is indicated on the  
AC adapter label. Refer to the illustration below for the correct AC Adapter output polarity:  
When using your notebook equipment, basic safety precautions should always be followed to  
reduce the risk of re, electric shock and injury to persons, including the following:  
Do not use this product near water for example, near a bathtub, washbowl, kitchen  
sink or laundry tub, in a wet basement or near a swimming pool.  
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a  
re. They may explode. Check with local codes for possible special disposal instructions.  
SAVE THESE INSTRUCTIONS  
For Authorized Repair Technicians Only  
CAUTION:  
For continued protection against risk of re, replace only with the  
same type and rating fuse.  
WARNING:  
Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only  
with the same or equivalent type recommended by the manufacturer.  
Dispose of used batteries according to the manufacturer’s instruction.  
Fujitsu  
85  
 
Manufacturer’s notes  
ENERGY STAR Compliance  
Your Fujitsu system is an ENERGY STAR qualied mobile PC. By choosing a computer with the  
latest energy-saving technology, you’re helping to preserve our environment for future generations.  
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency, U.S. Department  
of Energy, Natural Resources Canada, and other governments around the world helping us save  
money while protecting the environment through energy efcient products and practices. With  
energy costs and global warming top-of-mind for consumers, Fujitsu is committed to offering  
solutions that help consumers conserve energy and improve the quality of our environment.  
Sleep Mode:  
You will notice that your computer is initially set so that the display turns off after 15 minutes of  
user inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. When  
going into Sleep mode, the computer also reduces the speed of any active Ethernet network  
links. To wake” the computer from Sleep mode, press the Suspend/Resume Button.  
Energy saving benets:  
Fujitsu ENERGY STAR qualied mobile PCs use about half as much electricity as standard  
equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference  
for the environment. Did you know that the average house can be responsible for twice the  
greenhouse gas emissions as the average car? That’s because every time you ip on a light  
switch, run your dishwasher, or turn on your PC, you use energy, which means more greenhouse  
gas emissions from power plants. So the more energy we can save through energy efciency,  
the more we help to reduce greenhouse gases and the risks of global warming.  
To learn more about the important ENERGY STAR program, visit: "www.energystar.gov".  
To read about how Fujitsu is supporting Sustainable Management along with  
several other environmental activities, visit the Fujitsu Corporate Citizenship page at:  
Declarations of Conformity  
Declarationofconformity  
This device complies with Part 15 of the FCC rules. Operations are subject to the following two  
conditions: (1) This device may not cause harmful interference, (2) This device must accept any  
interference received, including interference that may cause undesired operation.  
86  
Fujitsu  
     
Manufacturer’s notes  
FCC and IC Regulatory Information  
Please note the following regulatory information related to the wireless LAN  
device.  
Regulatory Notes and Statements  
Wireless LAN, Health and Authorization for use  
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of  
these emissions, however, are far much less than the electromagnetic energy emissions from wireless  
devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they  
operate within the guidelines found in radio frequency safety standards and recommendations. The  
use of Wireless LAN devices may be restricted in some situations or environments, such as:  
On board an airplane, or  
In an explosive environment, or  
In situations where the interference risk to other devices or services is  
perceived or identied as harmful.  
In cases in which the policy regarding use of Wireless LAN devices in specic environments is  
not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain  
authorization to use these devices prior to operating the equipment.  
Regulatory Information/Disclaimers  
Installation and use of this Wireless LAN device must be in strict accordance with the instructions  
included in the user documentation provided with the product. Any changes or modications made  
to this device that are not expressly approved by the manufacturer may void the user’s authority to  
operate the equipment. The manufacturer is not responsible for any radio or television interference  
caused by unauthorized modication of this device, or the substitution or attachment of connecting  
cables and equipment other than those specied by the manufacturer. It is the responsibility of the  
user to correct any interference caused by such unauthorized modication, substitution or attachment.  
The manufacturer and its authorized resellers or distributors will assume no liability for any damage  
or violation of government regulations arising from failure to comply with these guidelines.  
This device must not be co-located or operated in conjunction with any other antenna or transmitter.  
For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is  
restricted to indoor environments, and the antenna of this device must be integral.  
Federal Communications Commission and Industry Canada statement:  
This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s).  
Operation is subject to the following two conditions: (1) This device may not cause  
interference, and, (2) This device must accept any interference, including interference  
that may cause undesired operation of this device.  
Fujitsu  
87  
   
Manufacturer’s notes  
Déclaration d’Industrie Canada  
Cet appareil est conforme à la Section 15 des Règles de la FC C et à la ( aux) norme(s)  
RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnement  
est soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférence  
nuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles  
pouvan t causer un mauvais fonctionnement de l’appareil.  
FCC Interference Statement  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy. If not installed and used in accordance with  
the instructions, it may cause harmful interference to radio communications. However, there  
is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to try and  
correct the interference by one or more of the following measures:  
1. Reorient or relocate the receiving antenna.  
2. Increase the distance between the equipment and the receiver.  
3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.  
4. Consult the dealer or an experienced radio/TV technician for help.  
FCC Radio Frequency Exposure statement  
The available scientic evidence does not show that any health problems are associated with  
using low power wireless devices. There is no proof, however, that these low power wireless  
devices are absolutely safe. Low power wireless devices emit low levels of radio frequency  
energy (RF) in the microwave range while being used. Whereas high levels of RF can produce  
health effects (by heating tissue), exposure to low-level RF that does not produce heating  
effects causes no known adverse health effects. Many studies of low-level RF exposure have  
not found any biological effects. Some studies have suggested that some biological effects  
might occur, but such ndings have not been conrmed by additional research.  
The wireless LAN radio device has been tested and found to comply with FCC radiation  
exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency  
(RF) Exposure Guidelines in Supplement C to OET65.  
The exposure standard for wireless devices employs a unit of measurement known as the Specic  
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada.  
This device is compliant with SAR for general population /uncontrolled exposure limits in  
ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with  
the measurement methods and procedures specied in OET Bulletin 65 Supplement C,  
and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure  
guidelines when tested with the device operating conditions.  
88  
Fujitsu  
Manufacturer’s notes  
Déclaration de la FCC/d’Industrie Canada sur l’exposition  
aux radiofréquences  
La norme régissant l’exposition des appareils sans l aux radiofréquences emploie une unité  
de mesure dénommée Taux d’absorption spécique, ou TAS. La FCC et Industrie Canada ont  
ni la même limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites  
d’exposition générales de la population/non contrôlées dénies par les règles C95.1-1992 de  
l’ANSI/IEEE et RSS 102 d’Industrie Canada ; il a été testé en conformité avec les méthodes  
et procédures de mesure spéciées dans le supplément C du bulletin 65 de l’OET (Ofce  
d’ingénierie et de technologie) et la règle RSS 102 d’Industrie Canada. Cet appareil a été testé  
selon les directives de la FCC et d’IC concernant l’exposition aux radiofréquences et s’est révélé  
conforme à ces dernières lorsqu’il a été testé en contact direct avec le corps.  
Export restrictions  
This product or software contains encryption code which may not be exported or transferred  
from the US or Canada without an approved US Department of Commerce export license.  
This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B.  
Operation is subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including interference  
that may cause undesirable operation. Modications not expressly authorized by Fujitsu  
America, Inc. may invalidate the user’s right to operate this equipment.  
Canadian Notice  
The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential  
for harmful interference to co-channel mobile satellite systems.  
The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 -  
5725 MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210.  
In addition, users are cautioned to take note that high power radars are allocated as primary  
users (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these  
radars could cause interference and/or damage to LE-LAN devices.  
Avis pour le Canada  
Le matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utilisé  
uniquement à l’intérieur an de réduire les risques de brouillage nuisible causé aux  
systèmes mobiles par satellite fonctionnant sur un même canal.  
Un gain d’antenne de 6 dBi est autorisé (pour le matériel utilisant les bandes 5 250 - 5 350  
MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformément à la limite p.i.r.e. maximale  
permise selon l’annexe A9.2 afférent aux périphériques RSS210.  
En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissance  
sont considérés comme des utilisateurs principaux (ce qui signie qu’ils sont prioritaires) des  
bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférences  
et/ou des dommages aux appareils de réseau exempts de licence.  
Fujitsu  
89  
Appendix  
Appendix  
Before Using the Optional Wireless LAN  
This manual describes the procedures required to properly set up and congure the optional  
integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the  
manual). Before using the WLAN device, read this manual carefully to ensure its correct  
operation. Keep this manual in a safe place for future reference.  
Wireless LAN Devices Covered by this Document  
This document is applicable to systems containing the following device:  
Intel® Dual Band Wireless-N 7260  
Characteristics of the WLAN Device  
The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer.  
The WLAN devices operate in license-free RF bands, eliminating the need to procure  
an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientic,  
and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz  
Unlicensed National Information Infrastructure (UNII) bands.  
The WLAN devices are capable of four operating modes, IEEE802.11a,  
IEEE802.11b, IEEE802.11g, and IEEE802.11n.  
The WLAN device is Wi-Fi certied and operates (as applicable) at the maximum data  
rate of 450 Mbps in IEEE802.11n mode (300 Mbps in this conguration); 54 Mbps  
in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.  
The WLAN devices support the following encryption methods - WEP,  
TKIP, CKIP, and AES encryption.  
The Wireless LAN devices are compliant with the following standards: WPA,  
WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0.  
90  
Fujitsu  
       
Appendix  
Wireless LAN Modes Using this Device  
Ad Hoc Mode  
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity  
between multiple computers is established without a central wireless network device, typically  
known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer  
fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc  
networks are an easy and inexpensive method for establishing network connectivity between  
multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption  
key settings are identically congured on all computers in the Ad Hoc network.  
Fujitsu  
91  
 
Appendix  
Access Point (Infrastructure) Mode  
Infrastructure mode refers to a wireless network architecture in which devices communicate with  
wireless or wired network devices by communicating through an Access Point. In infrastructure  
mode, wireless devices can communicate with each other or with a wired network. Corporate  
wireless networks operate in infrastructure mode because they require access to the WLAN in  
order to access services, devices, and computers (e.g., le servers, printers, databases).  
**  
*
*
= An optional hub for a wired LAN may  
be required depending upon the type  
of access point used.  
** = ADSL modem, cable modem, or similar  
How to Handle This Device  
The WLAN device is an optional device that may come pre-installed in your mobile computer. Under  
normal circumstances, it should not be necessary for you to remove or re-install it. The Operating  
System that your mobile computer comes with has been pre-congured to support the WLAN device.  
Integrated Intel Centrino wireless LAN devices support IEEE802.11a,  
IEEE802.11b, IEEE802.11g, and IEEE802.11n.  
The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz  
lower, middle, and upper UNII bands.  
92  
Fujitsu  
Appendix  
Microwave ovens may interfere with the operation of WLAN devices since they operate in the  
same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves  
does not occur with IEEE802.11a radio which operates in the 5 GHz RF band.  
Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN  
devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput,  
intermittent disconnects, and many frame errors. It is HIGHLY recommended that these  
interfering devices be powered off to ensure proper operation of the WLAN device.  
Deactivating/Disconnecting the WLAN Device  
Disconnecting the WLAN device may be desired in certain circumstances (to extend battery  
life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The  
WLAN device can be disconnected in Windows using the WLAN icon in the system tray  
(Note that disconnecting via the icon in the system tray does not turn off the radio; it  
continues to transmit and receive even though it’s not connected.)  
The radio components are switched on and off using the appropriate functions of the operating system.  
To switch radio components on and off individually, select Settings – Change  
PC settings – Wireless – Wireless devices – Off.  
Conguring the Wireless LAN  
The optional WLAN device can be congured to establish wireless network connectivity  
using the software that is built into Windows. Support for most industry standard  
security solutions is contained in this software.  
Pre-dened parameters will be required for this procedure. Please consult with  
your network administrator for these parameters:  
Connection to the network  
After you have congured your computer, you can connect to an active network  
by performing the following steps:  
1. Click on the WLAN icon in the system tray.  
2. Select Connect to a network.  
3. Select a network from the list that appears, and click the Connect button.  
Fujitsu  
93  
     
Appendix  
Troubleshooting the WLAN  
Causes and countermeasures for troubles you may encounter while using your  
wireless LAN are described in the following table.  
Problem  
Possible Cause  
Possible Solution  
Unavailable network connection Incorrect network name (SSID) Ad hoc connection: verify that  
or network key  
the network names (SSID’s)  
and network keys (WEP) of  
all computers to be connected  
have been congured correctly.  
SSID’s and WEP key values  
must be identical on each  
machine.  
Access Point (Infrastructure)  
connection: set the network  
name (SSID) and network key  
to the same values as those of  
the access point.  
Set the Network Authentication  
value identically to that of the  
Access Point. Please consult  
your network administrator for  
this value, if necessary.  
Weak received signal strength Ad hoc connection: Retry  
and/or link quality  
connection after shortening  
the distance to the destination  
computer or removing any  
obstacles for better sight.  
Access Point (Infrastructure)  
connection: Retry connection  
after shortening the distance to  
the access point or removing  
any obstacles for better sight.  
94  
Fujitsu  
 
Appendix  
Problem  
Unavailable network connection The WLAN device was  
(continued) deactivated or is disabled  
Possible Cause  
Possible Solution  
Check if the wireless switch  
is turned On. Go to Start >  
Control Panel, and doubleclick  
on Windows Mobility Center. If  
the wireless network is off, click  
the Turn wireless on button.  
The computer to be connected Check if the computer to be  
is turned off  
connected is turned ON.  
Incorrectly congured network Recheck the conguration of  
settings  
your network settings.  
RF interference from Access  
Points or other wireless  
networks  
The use of identical or  
overlapping RF channels can  
cause interference with the  
operation of the WLAN device.  
Change the channel of your  
Access Point to a channel  
that does not overlap with the  
interfering device.  
Wireless network authentication Re-check your Network  
has failed  
Authentication, Encryption,  
and Security settings.  
Incorrectly congured  
security settings such as  
an incorrectly typed WEP  
key, a mis-congured LEAP  
username, or an incorrectly  
chosen authentication method  
will cause the LAN device to  
associate but not authenticate  
to the wireless network.  
Incorrect IP address  
conguration  
This only applies to networks  
using static IP addresses.  
Please contact your network  
administrator for the correct  
settings.  
Fujitsu  
95  
Appendix  
Using the Bluetooth Device  
Bluetooth is integrated into the Wireless LAN module. The Bluetooth capabilities are Bluetooth  
Basic, EDR and Bluetooth Low Energy (BT v4.0) operational modes.  
What is Bluetooth  
Bluetooth technology is designed as a short-range wireless link between mobile devices, such  
as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create  
Personal Area Networks (PANs) between devices in short-range of each other.  
To enable or disable either the wireless LAN or Bluetooth devices  
individually, perform the following steps:  
1. Go to the Modern Start screen and select Charms > Settings >  
Change PC Settings > Wireless.  
2. Under Wireless > Wireless Devices, click on the Bluetooth switch to turn it on.  
Where to Find Information About Bluetooth  
For additional information about Bluetooth Technology, visit the Bluetooth  
Web site at: "www.bluetooth.com".  
FCC Radiation Exposure Statement  
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled  
environment. The Bluetooth antenna is located on the top edge of the LCD screen and  
is exempt from minimum distance criteria due to its low power.  
The transmitters in this device must not be co-located or operated in conjunction  
with any other antenna or transmitter.  
Canadian Notice  
To prevent radio interference to the licensed service, this device is intended to be  
operated indoors and away from windows to provide maximum shielding. Equipment (or  
its transmit antenna) that is installed outdoors is subject to licensing.  
Warranty  
Users are not authorized to modify this product. Any modications invalidate the warranty.  
This equipment may not be modied, altered, or changed in any way without signed  
written permission from Fujitsu. Unauthorized modication will void the equipment  
authorization from the FCC and Industry Canada and the warranty.  
96  
Fujitsu  
 
Appendix  
Image Backup and Recovery Procedures  
Thank you for purchasing a Fujitsu computer. Fujitsu is committed to bringing you  
the best computing experience with your new system.  
It is very important that you create DVD copies of your Recovery Image and Bootable Disk  
before beginning to use your system. To do so, follow the instructions in the “Creating a  
Backup of Bootable Disk and Recovery Image” section of this document.  
It is also important that you create a copy of the software that is essential for your system to access the  
internet (hereafter called “essential access software”) to external writable media or an external drive.  
To do so, follow the instructions in the “Creating a Backup of the System-Specic Software Drivers”.  
Creating a Backup of Bootable Disk and Recovery Image  
When you purchased your new system, a copy of the recovery image was loaded into a  
hidden partition on your hard disk drive. Having a copy of the recovery image available to  
you means that in the event of system failure, you will be able to restore it and re-install  
the essential access software using Fujitsu Software Auto Installer.  
To make a copy of the recovery image to DVD disks, you will need three or four blank  
disks to create the copy. After creating the copy, be sure to label the disks and keep  
them in a safe place to ensure they do not get damaged.  
Note: If your system does not have an internal writable DVD drive, connect your  
system to an external drive* before beginning the following steps.  
1. Launch System Restore and Recovery from the desktop icon. It will allow you to create  
the Bootable Disk and the Recovery Image Disk Set.  
2. On “Step 1: Select the Bootable Disk from the list”:  
a. Select a media type.  
b. Notice the number of disks that are needed for the set.  
c. Click Next to proceed.  
3. On “Step 2: Conrm your Recovery Disk”, click Next.  
4. On “Step 3:” follow the on-screen instructions to make the disk or disk set, then click  
Start. It takes approximately 20 minutes to make one disk.  
5. On “Step 4”, when the disk creation is completed, a message appears.  
Click Finish to exit the program.  
6. Repeat Step 1: Select Recovery Disk from the list and repeat the above  
steps 2(a), 2(b), 2(c), 3, 4 and 5.  
* DEPENDING UPON YOUR OPTICAL DRIVE AND MEDIA FORMAT USED, SOME MEDIA  
TYPES MAY BE INCOMPATIBLE FOR CREATING IMAGE BACKUPS.  
Fujitsu  
97  
   
Appendix  
Creating a Backup of Essential Access Software  
When you purchased your new system, a “Fujitsu Software Extractor” shortcut was loaded to  
“C:\Fujitsu\Drivers\AutoInstaller\”. This shortcut allows you to save the software driver packages  
along with the extracted Auto Installer software package to a selected location. It is recommended  
that you save these packages to writable media or an external drive. This ensures that in the  
event of system failure you will be able to re-install the essential access software.  
1. Open the C:\Fujitsu\Drivers\AutoInstaller\ folder  
2. Run “Fujitsu Software Extractor” as an Administrator  
a. Right-click on Fujitsu Software Extractor.  
b. Select the “Run as Administrator” option from the menu that is displayed.  
3. The default save location is C:\Fujitsu\ AutoInstaller\ Drivers\. You can change the location  
by clicking on the Browse button and selecting your preferred location.  
Note: It is recommended that you change the default location and save the  
software packages to the external writable media or drive.  
4. Click on the Save Packages button.  
5. Fujitsu Software Extractor copies the zipped software packages and Readme les,  
and extracts the Auto Installer folder to the selected location.  
Note: The extracted Auto Installer will later be used to install the software  
automatically on the system in the event of generic image restoration when  
the software is not pre-installed in the image.  
RECOVER YOUR SYSTEM WHEN THE HARD  
DRIVE IS STILL ACCESSIBLE  
Using the Recovery and Utility Tools  
The Recovery and Utility tools consist of a variety of tools that will help you recover your  
recovery image and system images, and delete the data from your hard disk.  
Methods for accessing the utilities  
Recovery and Utility Tools are preinstalled in a hidden partition by the factory, or  
they can be accessed by using the bootable disk.  
Note: The Recovery and Utility tools may be deleted from your hard disk  
drive if you modify the partitions. If that occurs, you will not be able to  
use the hidden partition for booting to Recovery and Utility Tools, but you  
will still be able to boot from the Bootable Disk.  
98  
Fujitsu  
   
Appendix  
Determining whether Recovery and Utility is pre-loaded  
F12  
1. Turn on or reboot your system. When the Fujitsu logo appears, press the  
key.  
Tab  
2. Use the  
key to get to the Application Menu.  
3. Check whether the Recovery and Utility option is present. If it is not present, it means  
that the utility must be used from the Bootable Disk. Proceed to “Running Recovery and  
Utility from the Bootable Disk” if Recovery and Utility is unavailable.  
Running Recovery and Utility from hard disk  
F12  
1. Turn on or reboot your system. When the Fujitsu logo appears, press the  
Tab  
3. Cursor down to Recovery and Utility and press the  
4. Choose your language, if necessary. Select Recovery and Utility to proceed.  
key.  
2. Use the  
key to get to the Application Menu.  
Enter  
key.  
5. Three tool options appear: Diagnostics, Recovery, and Utility (refer to the Recovery and  
Utility tools section below for instructions on how to use these tools).  
6. If this was successful please skip the next step and go to “Recovery and Utility tools.”  
7. If this was NOT successful, please go to the next step.  
Running Recovery and Utility from the Bootable disk  
To verify/change the boot-up priority (rather than booting-up from the hard drive or  
an external media drive), perform the following steps:  
F12  
1. Power on your system. When the Fujitsu logo appears on the screen, press the  
2. Insert the bootable disk into the drive tray.  
key.  
Enter  
3. Highlight the CD/DVD option from the Boot menu, then press  
.
4. Click OK.  
Enter  
5. Select CD/DVD boot mode: UEFI Mode, if applicable, and then press  
.
While the les are being loaded from the disk, the Fujitsu logo screen will appear  
followed by a progress bar at the bottom of the screen.  
Fujitsu  
99  
Appendix  
Recovery and Utility tools  
Note: Recovery and Utility tools may not be available on your system depending  
on the region from which the system was shipped.  
Diagnostics tool: The Diagnostics tool is designed for use by IT professionals. It is not likely you  
will need to use this tool. If you should need to use this tool, perform the following steps:  
1. Press the Diagnostics Tool button to start the Diagnostics tool.  
2. Read the note, and then click OK.  
3. Choose one or more of the following options for diagnostics on the Fujitsu Hardware Diagnostics  
Tool window: CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disk, Keyboard, and Mouse.  
4. Click the Option button in the Tool menu to specify how many times the tool  
should run diagnostics on each selected component.  
5. Press Execute to start the Diagnostics tool.  
6. After the execution is completed, the selected components are circled in red to indicate that they  
have been diagnosed and the result dialog window opens. Click Close to close the window.  
7. Click End to close the Diagnostics tool, and then click Yes to conrm the end of diagnostics session.  
Recovery tool: The Recovery tool contains two options:  
Restore C Drive: Restore recovery image (only C: drive)  
Restore Full Hard Drive: Restore recovery image (full hard drive).  
You can use these tools to restore the Recovery Image from the hidden partition, and perform a full  
hard drive recovery. Please refer to instructions above for details on how to create a Recovery Image.  
Restore the Recovery Image from Hidden Partition  
1. Click [Restore C: drive] from Recovery and Utility tools  
2. The progress bar is followed by “Restore Recovery image (only C: drive)” screen  
conrming that the Image will be restored to the C: drive. Click Next.  
3. Read the instruction screen and select Agree, then click Next.  
4. Click OK to acknowledge the warning message to restore recovery image to the C: drive.  
5. When the progress bar appears, wait for the process to complete.  
6. Click Finish when the process completes; the computer will restart to Windows.  
7. Follow the steps listed in the “Auto Installation support for software packages  
from hidden partition” section.  
8. Download FSDM (Fujitsu Software Download Manager) from the support site and download  
all the software applicable to the model and OS using FSDM.  
9. Follow the steps listed in “Auto Installation support for software packages  
downloaded from support website” section.  
100  
Fujitsu  
 
Appendix  
RECOVER YOUR SYSTEM WHEN THE HARD  
DRIVE IS NOT BOOTABLE  
Restore the Recovery Image for Full Hard Drive  
Follow the steps in the “Recovering your Recovery Image using Recovery and  
Utility (for new hard drive or non-bootable hard drive)” section. You will need the  
Bootable Disk and the Recovery Disk Set for this task.  
Utility tool: If applicable for your region, the Utility tool contains two options:  
Hard Disk Data Delete and Partition Creation.  
The Hard Disk Data Delete utility is used to delete all data on the hard disk  
and prevent the data from being reused.  
NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certain  
that you want to erase your entire hard disk, including all partitions.  
To delete hard disk data:  
1. Click the Hard Disk Data Delete button. The progress bar appears, followed by the EULA screen.  
2. Agree to the EULA and click Next.  
3. Choose the hard disk from which the data should be deleted in the list of hard disks and click Next.  
The Partition Creation utility is used to change the C: and D: drive partition sizes.  
To run this utility: (This is not an option when using Windows 7.)  
1. Click the Partition Creation button.  
2. A progress bar appears, followed by the EULA screen. Agree to the EULA.  
3. On the Recovery Tool - Partition Creation screen, move the slider to set disk size, and then click OK.  
4. Click Yes in the Partition Creation conrmation dialog.  
WARNING: It is highly recommended that you send your product to Fujitsu  
Service to replace a hard drive. A mistake could possibly destroy your  
computer, your new hard drive or both.  
Fujitsu  
101  
   
Appendix  
Recovering Your Recovery Image Using Recovery and Utility  
(for new hard drive or non-bootable hard drive)  
If you have installed a new hard drive or your hard drive is not bootable, perform the following steps.  
Note: You will need the Bootable disk and Recovery Image disk set for this recovery.  
Enter  
1. Power on your system. When the Fujitsu logo appears on the screen, press the  
key.  
2. Insert the bootable disk in your DVD drive, then click OK.  
Enter  
3. Highlight the CD/DVD option from the Boot Menu and press  
.
Enter  
4. Select CD/DVD boot mode: Select UEFI Mode, if applicable and press  
.
While the les are being loaded from the disk, the Fujitsu logo screen appears  
followed by a progress bar at the bottom of the screen.  
5. Choose your language, if necessary.  
6. Three tool options appear: Diagnostics, Recovery and Utility. Select Recovery.  
For Windows 8.1: Select Restore full hard drive  
For Windows 7: Select Restoring the Factory Image (full hard drive recovery)  
7. Click Next to conrm full hard drive restoration. All data on HDD will be deleted.  
8. Agree to EULA by selecting Agree option and clicking Next.  
9. Click Next on the Recovery Disk Check screen to verify that the bootable  
disk has been inserted into the optical drive.  
10. The Checking for Recovery Disk screen appears followed by the prompt to insert the  
rst disk. Click OK to continue. Repeat this step for all disks. After all recovery disks  
have been checked and the check has been completed, click Next.  
11. Follow the prompt to reinsert the rst recovery disk and click Next.  
12. Click OK when you receive the nal warning informing you that all data on drive  
C will be lost. This starts the recovery process.  
13. Follow the prompts to insert the next recovery disks and click OK.  
14. After the copying of the image to the HDD completes the restore process is  
complete, click Finish to restart the system. The computer will restart automatically  
and then go through the rst boot process.  
15. Follow the steps listed in “Auto Installation support for essential access  
software from backup location” section.  
16. Download FSDM (Fujitsu Software Download Manager) from support site and download  
all the software applicable to the model and OS using FSDM.  
17. Follow the steps listed in “Auto Installation support for essential access  
software downloaded from support website.  
102  
Fujitsu  
 
Appendix  
Installing the Software after the Recovery Image is Restored  
Auto-installation support for essential access software  
from hidden partition  
The below listed steps are applicable only in cases in which the recovery image restore  
and hidden partition contents have not been wiped out.  
1. After the recovery image is restored, launch the desktop icon “Fujitsu Software Auto Installer”.  
2. Double-click on “Fujitsu Software Auto Installer” desktop icon.  
3. Click Yes on User Account Control Dialog box. This will take some time to  
process the software packages. A message will be displayed during this time,  
“Please wait while the content is being processed”.  
4. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.  
5. Then Fujitsu Software Auto Installer user interface will be launched providing ability  
to auto-install the essential access software on the system.  
6. It is recommended that you install all the software in the listed order. You can  
Select All, to install the software in the order listed.  
7. Click Install to start the installation.  
8. After installing all the selected drivers, Installation Results window will be displayed. Click OK.  
9. “You must restart the system for the settings to take effect. Do you wish to  
reboot now?” message appears. Select Yes.  
10. The system will now reboot.  
11. You can now connect to the internet and download FSDM (Fujitsu Software Download  
Manager) from the support site and download all the software applicable to the  
model and OS using FSDM if they are not downloaded yet.  
Fujitsu  
103  
 
Appendix  
Auto-installation support for essential access software  
from backup location  
The below listed steps are applicable in cases in which a backup copy was created as  
mentioned in the section “Creating a Backup of essential access software”.  
1. It is important to have the extracted Auto installer software package folder  
and Readme le in the same location as other software folders. Otherwise  
auto-installation of the software will not be supported.  
2. Inside the Auto Installer software package, launch FjAutoinstall.exe as an Administrator.  
3. Click Yes on the User Account Control dialog box. This will take some time to  
process the software packages. A message will be displayed during this time stating,  
“Please wait while the content is being processed”.  
4. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.  
5. The Fujitsu Software Auto Installer user interface will be launched providing ability  
to auto install the essential access software on the system.  
6. It is recommended that you install all the software in the listed order. You can  
“Select All”, to install the software in the order listed.  
7. Click the Install button to start the installation.  
8. After installing all the selected drivers, Installation Results window is be displayed. Click OK.  
9. “You must restart the system for the settings to take effect. Do you wish to  
reboot now?” message appears. Select Yes.  
10. The system will now reboot.  
Auto Installation support for the software downloaded from support website  
1. Download FSDM (Fujitsu Software Download Manager) from the support site and download all  
the drivers applicable to the model and OS using FSDM if they are not downloaded yet.  
2. When the software packages are downloaded from web, it is important to download  
the Auto Installer Software package and the model/language- specic Readme  
le if you prefer to auto install the software.  
3. It is important to have the extracted Auto Installer software package folder  
and Readme le in the same location as other software folders. Otherwise  
auto-installation of the software will not be supported.  
4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.  
5. Click Yes on the User Account Control dialog box. This will take some time to  
process the software packages. A message will be displayed during this time stating  
“Please wait while the content is being processed”.  
6. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.  
7. The Fujitsu Software Auto Installer user interface will be launched providing the ability  
to auto install the software downloaded from support site.  
8. It is recommended that you install all the software in the listed order. You can  
Select All, to install the software in the order listed.  
9. Click the Install button to start the installation.  
10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.  
11. “You must restart the system for the settings to take effect. Do you wish to  
reboot now?” message appears. Select Yes.  
12. The system will now reboot.  
104  
Fujitsu  
Appendix  
Downloading Driver Updates  
To ensure that you always have the most current driver updates related to your system,  
occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM  
utility is available from the Fujitsu Support site. FSDM will allow you to view and  
download a list of the most current drivers, utilities, and applications to determine whether  
you have the latest versions. To download the FSDM Utility, go to the Support Site:  
If you are planning on downgrading, upgrading or changing versions of your operating system during  
this process please see the User’s Guide for more information at "http://solutions.us.fujitsu.com".  
Fujitsu  
105  
Index  
Index  
A
B
F
G
H
C
I
K
D
L
M
E
106  
Fujitsu  
 
Index  
S
N
O
P
T
R
Fujitsu  
107  

York Sunline 2000 D3cg User Manual
Sharp Fp N25cx User Manual
Sharp Automobile Parts Af S60fx User Manual
Schumacher Sc 200a User Manual
NEC PX750U User Manual
Maxx Ice Mim50 User Manual
MAKITA LD080PI User Manual
FUJITSU WORKSTATION CELSIUS C740 User Manual
ASUS USB AC55 AC1300 User Manual
ACER ASPIRE E1 E1 472PG User Manual