Home Cinema 660/760HD/1060
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a video source
(DVD player, streaming device, etc.) connected by an HDMI cable. If you do not
use an HDMI connection, you must connect your device’s audio output to the
projector’s audio input.
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Note: Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Home Cinema 660/760HD
Connect the projector
HDMI cable
Choose from the following connections. See the sections below or the online
User’s Guide for details.
RCA audio cable
Video device
Connect multiple video devices and use the Source Search button on the
projector or the remote control to switch between them.
Home Cinema 1060
Home Cinema 660/760HD
HDMI cable
Component video
to VGA cable
RCA audio cable
External speakers
HDMI cable
Connect your device’s audio output to your home theater receiver or powered
speakers.
RCA video cable
(composite video)
Note: The internal speaker is disabled when an external device is connected.
If you are using an HDMI connection to the projector, you may need to reduce
the projector speaker volume to zero (0), or make sure that the correct audio
output is selected on your device.
Home Cinema 1060
HDMI cable
Home theater system
Component video
to VGA cable
Video source
RCA video cable
(composite video)
Mobile media device (Home Cinema 1060)
Connect tablets, smartphones, and other devices that support the MHL™
Video cable
standard to the HDMI2/MHL port.
Surround sound
Receiver
Projector
Powered speakers
MHL cable
Streaming device
Video cable
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device’s documentation for
more information.
External speakers
Video source
Projector
Note: See your home theater receiver documentation for more information
on connections.
Computer
Connect one end of an HDMI cable to one of the projector’s HDMI ports shown
above and the other end to an HDMI port on your computer.
Turn on your equipment
Turn on your video source or computer.
1
Note: For more information on connecting the projector to your computer or
other devices (camera, USB flash drive, etc.), see the online User’s Guide.
Plug in the projector. The
power light on the projector turns blue.
2
Open the A/V Mute slide all the way.
To sharpen the image, turn the focus ring.
3
4
4
5
Home Cinema 660
Home Cinema
760HD/1060
If your image looks like
or
, you may have placed the projector
Press the
power button on the projector or remote control. The
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can’t
move the projector, use the horizontal keystone slider on the projector
to correct the image shape.
projector beeps, the Status light flashes blue, and then stays on.
Home Cinema 660
Home Cinema
760HD/1060
Your projector automatically adjusts images that look like
or
,
Note: To shut down the projector, press the
power button twice.
6
but if necessary you can press the
correct it.
or
button on the projector to
Use the arrow buttons on the remote control to highlight any options on
the Home screen that appears, then press to select it. You can switch
5
between projection sources and quickly access various adjustment options
from this screen.
Using the remote control
Install the batteries as shown (two AA batteries).
The default language of the menu system is English. To select another
language, press the Menu button on the projector or the remote
6
Turn projector
on and off
Choose which source
to display
control. Select Extended and press
Select your language and press
menu system.
. Select Language and press
. Press the Menu button to exit the
.
Adjust the image
If you don’t see an image, press the Source Search button on the
projector or the remote control to select the image source.
1
Note: If you still see a blank screen or have other display problems, see
the tips in “Troubleshooting” on the back of this sheet.
Access projector
menus
Navigate projector
menus
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
2
Turn off projector
display
Access the Home
screen
Home Cinema 660: To reduce or enlarge the image, press the T (reduce)
or W (enlarge) button on the projector.
3
For more information on using the remote control, see the online
User’s Guide.
Home Cinema 760HD/1060: To reduce or enlarge the image, turn the
zoom ring.
Home Cinema 660
Home Cinema
760HD/1060
Troubleshooting
Notices
Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers.
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
Make sure the Status light on the projector is blue and not flashing,
and the A/V Mute slide is open.
•
We:
Located at:
Telephone:
Epson America, Inc.
3840 Kilroy Airport Way, MS: 3-13, Long Beach, CA 90806
(562) 981-3840
Press the Source Search button on the projector or remote control to
switch to the correct image source, if necessary.
•
Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,
is identical to the representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment being produced can
be expected to be within the variation accepted, due to quantity production and testing
on a statistical basis as required by 47CFR 2.909. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Press the Home button on the projector or remote control to verify the
source input and settings.
•
On Windows® 7 or later, hold down the Windows key and press P at the
same time, then click Duplicate.
•
If you’re using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
•
Trade Name:
Type of Product:
Model:
Epson
LCD Projector
H847A/H848A/H849A
Home Cinema 660/760HD/1060
CRT/LCD or have an icon such as
. You may have to hold down the
Marketing Name:
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
Wireless LAN Safety and Specifications
If you’re using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
•
Contains wireless LAN module model: WN7122BEP (Home Cinema 1060)
This document provides safety instructions and describes the specifications. Read this
document carefully before use to ensure your safety and product performance.
Data transmission is always initiated by software, which is the passed down through
the MAC, through the digital and analog baseband, and finally to the RF chip. Several
special packets are initiated by the MAC. These are the only ways the digital baseband
portion will turn on the RF transmitter, which it then turns off at the end of the packet.
Therefore, the transmitter will be on only while one of the aforementioned packets is
being transmitted. In other words, this device automatically discontinue transmission in
case of either absence of information to transmit or operational failure.
Where to get help
Manual
For more information about using the projector, click the icon on your desktop
to access the online manual (requires an Internet connection). If you don’t have
a User’s Guide icon, you can install it from the projector CD or go to the Epson
website, as described below.
This equipment is restricted to indoor operation only.
U.S. FCC Notices
Contains FCC ID: BKMAE-7122
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Telephone support services
To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following
measures:
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and
7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Internet support
(Canada) for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Registration
Register today to get product updates and exclusive offers. You can use the CD
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment. Properly shielded
and grounded cables and connectors must be used for connection to host computers and
/ or peripherals in order to meet FCC emission limits.
Optional accessories
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
For a list of optional accessories, see the online User’s Guide.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.
This equipment should be installed and operated keeping the radiator at least 7.8 inches
(20 cm) or more away from person’s body.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
www.epsonstore.ca (Canadian sales).
Industry Canada (IC) Notices
Contains IC: 1052D-7122
CAN ICES-3 (B)/NMB-3 (B)
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject
to the following two conditions: (1) This device may not cause interference; and (2) This
device must accept any interference, including interference that may cause undesired
operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least 7.8 inches
(20 cm) or more away from person’s body.
Epson America, Inc. Limited Warranty
Two-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty
What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser
of the Epson projector product enclosed with this limited warranty statement that the
product, if purchased new and operated in the United States, Canada, or Puerto Rico will
be free from defects in workmanship and materials for a period of two years from the
date of original purchase. This limited warranty applies only to the projector and not to
the projector lamp, which carries a limited warranty period of ninety days from the date
of original purchase. For warranty service, you may be required to provide proof of the
date of original purchase.
What Epson Will Do To Correct Problems: If your product requires service during the
limited warranty period, please call Epson at the number on the bottom of this statement
and be prepared to provide the model, serial number, and, if required, date of original
purchase. If Epson confirms that warranty service is required, Epson will, at its option,
repair or replace the defective unit, without charge for parts or labor. If Epson authorizes
an exchange for the defective unit, Epson will ship a replacement product to you, freight
prepaid, so long as you use an address in the United States, Canada, or Puerto Rico. You
are responsible for securely packaging the defective unit and returning it to Epson within
five working days of receipt of the replacement. Epson requires a debit or a credit card
number to secure the cost of the replacement product in the event that you fail to return
the defective one. If Epson authorizes repair instead of exchange, Epson will direct you
to send your product to Epson or its authorized service center, where the product will
be repaired and sent back to you. You are responsible for packing the product and for
all postage or shipping costs to and from the Epson authorized service center. When
warranty service involves the exchange of the product or of a part, the item replaced
becomes Epson property. The exchanged product or part may be new or refurbished
to the Epson standard of quality. If service cannot be provided on the product for any
reason and Epson no longer sells the same model, Epson will replace your product with a
model of equal or superior value. Replacement products or parts assume the remaining
warranty period of the original product. If Epson replaces the lamp as part of the
warranty service, the replacement lamp carries the limited 90-day warranty stated above.
What This Warranty Does Not Cover: This warranty covers only normal use in the United
States, Canada, or Puerto Rico.
This warranty does not cover the following:
• Excessive continual use
• Consumables such as filters
• Installation or removal
• Cosmetic damage caused by handling or normal wear and tear during usage
• Damage caused by failure to properly maintain the projector (see your online User’s
Guide for details)
• Damage caused by interaction with non-Epson products, such as add-in cards or cables
• Any problem resulting from misuse, abuse, improper installation, neglect, improper
shipping, disasters such as fire, flood, and lightning, improper electrical current,
software problems, exposure to chemical smoke, or excessive humidity
• Any problem resulting from service by other than Epson or an Epson Authorized
Servicer
Epson is not responsible for warranty service should the Epson label or logo or the
rating label or serial number be removed. This warranty is not transferrable. Epson is
not responsible for your data or applications, which cannot be restored and should be
backed up by you. Postage, insurance, or shipping costs incurred in presenting your Epson
product for carry-in warranty service are your responsibility. If a claimed defect cannot be
identified or reproduced in service, you will be held responsible for costs incurred.
DISCLAIMER OF OTHER WARRANTIES: THE WARRANTY AND REMEDY PROVIDED
ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT
ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN
ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD
IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS
MADE BY ANY OTHER PERSON OR FIRM ARE VOID.
EXCLUSION OF DAMAGES; EPSON’S MAXIMUM LIABILITY: IN NO EVENT SHALL EPSON OR
ITS AFFILIATES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
OR ANY LOST PROFITS RESULTING FROM THE USE OR INABILITY TO USE THE EPSON
PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL
THEORY. IN NO EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR DAMAGES OF ANY
KIND IN EXCESS OF THE ORIGINAL RETAIL PURCHASE PRICE OF THE PRODUCT.
Arbitration, Governing Laws: Any dispute, claim or controversy arising out of or relating
to this warranty shall be determined by arbitration in Los Angeles County, California
before a single arbitrator. The arbitration shall be administered by JAMS pursuant to
its Comprehensive Arbitration Rules and Procedures. Judgment on the award may be
entered in any court having jurisdiction. Any action must be brought within three months
of the expiration of the warranty. This clause shall not preclude parties from seeking
provisional remedies in aid of arbitration from a court of appropriate jurisdiction. This
warranty shall be construed in accordance with the laws of the State of California,
except this arbitration clause which shall be construed in accordance with the Federal
Arbitration Act.
Other Rights You May Have: This warranty gives you specific legal rights, and you may
also have other rights which vary from jurisdiction to jurisdiction. Some jurisdictions do
not allow limitations on how long an implied warranty lasts, or allow the exclusion or
limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you.
In Canada, warranties include both warranties and conditions.
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko
Epson Corporation. PrivateLine is a registered trademark and Epson Connection is a service mark of
Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
To find the Epson Customer Care Center nearest you, please visit
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
SM, please call (800) 637-7661 or (562) 276-4394 in
To contact the Epson Connection
the U.S. and (905) 709-3839 in Canada or write to Epson America, Inc., P.O. Box 93012,
Long Beach, CA 90809-3012.
This information is subject to change without notice.
© 2017 Epson America, Inc., 4/17
Printed in XXXXXX
CPD-53626
|