Welcome to your Digi product
Get started: This guide helps you with initial product setup. Need more? Find additional
documentation by scanning this code:
Quick Start Guide
TransPort® WR11 XT
90001475 A
Digi Technical Support: Digi offers multiple support plans to help you get the most out of your
product. For information on Technical Support plans and pricing, contact us at 877.912.3444 or
Documentation Feedback: To provide feedback on this documentation, send your comments to [email protected].
1 Verify your components
Some models include some additional equipment. For details about the accessories that ship with your product and for a list of available
accessories that can be purchased separately, go to www.digi.com/support/TransPortWR11XT. Click on the Part Numbers and Accessories link
and then find your specific part number.
Contact a preferred carrier or the distributor for your device to inquire about cellular service options.
Included equipment
Required additional equipment
Optional equipment
2 Connect the hardware
Position the Digi TransPort WR11 on a flat, level surface in a location with adequate ventilation. The unit is designed for indoor use. Do not
expose the unit to extreme heat or cold, strong magnetic fields, or liquids.
Caution Restricted Access Location: Because of the hot metal surface of the enclosure, installations with operating temperatures
greater than 122F (50C) must be limited to Restricted Access Locations accessible only to trained service personnel.
© 2019 Digi International Inc.
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and other countries worldwide. All other trademarks mentioned in this
document are the property of their respective owners.
3 Get started with the Digi mobile app
Take advantage of the Digi Remote Manager subscription bundled with your product model purchase.
Use the Digi Remote Manager mobile app to quickly set up your product model.
Here's how:
a. Download the Digi Remote Manager mobile app from the App Store (iPhone) or Google Play (Android).
b. Click Log in or Sign Up and then click Sign up to create a new account.
c. You'll receive an email with login instructions.
d. From the Digi Remote Manager mobile app, click Log in and log into your new account.
e. From the menu, select Install a device with a QR or bar code and scan the installation QR code on the label.
f. Follow the prompts to complete your product model registration.
4 Run the Getting Started Wizard
If your PC is configured to automatically get an IP address, it can obtain the IP address from the TransPort WR11. Otherwise, make sure your PC
can connect to the network 192.168.1.0 (255.255.255.0).
a. Enter 192.168.1.1 into the address bar of the web browser.
b. The first page of the Getting Started Wizard appears. This wizard guides you through initial configuration of your TransPort device.
n To run the wizard, click Get Started.
n To manually configure the TransPort device, click Skip Wizard.
Note The default username and password for logging in to the TransPort device are username and password.
5 View the TransPort LEDs and startup states
n Service LED: Indicates the presence and level of cellular service running on the device.
Off: No cellular service
1 blink: GPRS mode
2 blinks: EDGE mode
3 blinks: UMTS mode
4 blinks: HSDPA mode
5 blinks: HSUPA mode
6 blinks: LTE mode
n Signal LED: Indicates the strength of the cellular signal.
Off: Poor or no signal. Place the device in a location where it gets a better signal.
Amber: Fair
Green: Good
n Power LED:
Off: No power
Green: TransPort device is powered
After the Getting Started Wizard completes, the TransPort web interface appears. For additional configuration, use the web interface and refer
to the Digi TransPort User Guide and Application Notes on the Digi website at www.digi.com/support/TransPortWR11.
6 Update device and modem firmware
Digi strongly recommends updating the router’s device and modem firmware before first use. This ensures that the router has the latest device
security and cellular network patches applied. To download the latest firmware, go to https://www.digi.com/support > Firmware Updates, select
|