Camera User Guide
ENGLISH
CDI-E386-010
© CANON INC. 2008
PRINTED IN MALAYSIA
Checking the Package Contents
Check if the following items are included in your camera package. If anything
is missing, contact the retailer where you purchased the camera.
AA-size Alkaline
Batteries (x2)
Memory Card
(32MB)
Camera
Interface Cable
IFC-400PCU
AV Cable
AVC-DC400
Wrist Strap
WS-800
Canon Digital Camera
Solution Disk
WarCard
“Canon Customer
Support” Leaflet
Cameuide
This Guide
ct Print User Guide
Read when you want to connect the camera to a printer and
print.
Software Starter Guide
Read when you want to connect the camera to a computer.
Explains how to install and use the software on the Canon
Digital Camera Solution Disk.
Download ZoomBrowser EX/ImageBrower Software
Guide (PDF) from:
http://web.canon.jp/imaging/information-e.htm
• You can use the included memory card to try out your new camera and
take some test shots.
• Adobe Reader must be installed to view the PDF manuals.
2
Conventions Used in this Guide
• Language that displays on the screen appears inside [ ].
• Buttons on the camera body are represented by the following icons.
button
FUNC./SET (Function/Set) button
button
button
button
MENU button
DISP. (Display) tton
•
•
•
•
: Troubleshooting tips for commprobls.
: Hints for getting more out oamera.
: Notes for preventing lfunc
: Supplemental exp
• (p. xx): xx stanr rege number.
• This guide asumes all fuare at their default settings unless
otherwise not.
• This camera cause rious types of memory cards. These are
collectively referred to as memory cards in this guide.
3
Read This First
Test Shots
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and
should never be used in a manner that infringes upon or contravenes
international or domestic copyright laws and regulations. Please be advised
that in certain cases the copying of images from peformances, exhibitions,
or commercial properties by means of a camera or ther device may
contravene copyright or other legal rights even iimage was shot for
personal use.
Warranty Limitations
This camera’s warranty is one in he country of sale. If there is a
problem with the camera whilpleae return it back to the country of
sale before proceeng with a claim to a Canon Customer Support
Help Desk.
For Canon CustomSupprt contacts, please see the customer
support list supplied your camera.
LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. The
camera is not damaged. This also has no effect on the recorded image.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. The camera is not damaged.
4
Capture Your st Memories
5
What Do You Want to Do?
Shoot
● Shoot, Leaving It to the Camera to Make Settings . . . . . . . . . . . 22
● Just Taking Pictures (Easy mode) . . . . . . . . . . . . . . . . . . . . . . . 54
4
● Shooting Various Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . 55–58
- Take good shots of people
Portraits
At night Kids and pets At the beach Snowscapes
I F C w P
(p. 55)
(p. 55)
(p. 55)
(p. 57)
(p. 57)
- Take good landscapes
Landscape
Nightscape
Foliag
Sunset
J , O U
(p. 55)
(p7)
(p. 57)
(p. 57)
- Shoot various other
Indoors
reworks
Aquarium
Low light
H t y Z
(p. 56)
(p. 58)
(p. 58)
(p. 58)
● Focus on faces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Shoot in places where I cannot use the flash (turn off the flash) . . 59
●
● Shoot pictures with me in them too (self-timer). . . . . . . . . . . . . . 60
● Insert the date and time into my pictures . . . . . . . . . . . . . . . . . . 63
● Take close-up pictures of subjects (macro shooting) . . . . . . . . . 64
● Take sepia toned or black and white pictures. . . . . . . . . . . . . . . 75
● Change the size of picture I want to take (recording pixels) . . . . 70
● Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
● Shoot without camera shake (image stabilization) . . . . . . . . . . 124
● Shoot without camera shake even in low light conditions
(high ISO speed). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58, 72
6
What Do You Want to Do?
View
● Look at my pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
● Automatically play back pictures (slide show). . . . . . . . . . . . . . . 98
1
● Look at pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
● Quickly search pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
● Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 101
● Protect pictures from accidental erasure. . . . . . . . . . . . . . . . . . 102
Shoot/View Movies
● Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
● Watch my movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
E
Print
● Easily print y pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Save
● Save images to a computer . . . . . . . . . . . . . . . . . . . . 31, 108, 109
Other
● Turn off sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3
7
Table of Contents
Chapters 1 – 3 explain the basic operations and frequently used functions of
this camera. Chapters 4 – 9 explain the advanced functions letting you learn
further as you read them in order.
Checking the Package Contents .......2
Conventions Used in this Guide ........3
Read This First ..................................4
What Do You Want to Do? ................6
Safety Precautions...........................10
LCD Monitor Precautions.................12
Formatting Memory Cards .............. 49
Changing the Image Display Time.. 52
1 Getting Started ....................13
Inserting the Batteries and
ning tFlash Off.................. 59
ning the lash On................... 59
Using the Self-Timer................... 60
Zoming in on Far Away Subjects .. 61
Inserting the Date and Time ..... 63
Memory Card..............................14
Setting the Date and Time...............18
Setting the Display Language..........20
Pressing the Shutter Button.........1
Taking Pictures........................
Viewing Images ...................
Erasing Images.......................
Printing Images.............................26
Shooting Movies .......................28
Viewing Movies................................30
Transferring Images to a Computer ... 31
Accessories .....................................36
Separately Sold Accessories...........38
e Shooting Close-ups (Macro)....... 64
u Shooting Far Away Subjects...... 65
4 Making Settings for the
Images You Want...........67
G Shooting in Program AE ............. 68
W Continuous Shooting ................. 69
2 Learning More......................39
Changing the Recording Pixels
(Image Size)............................... 70
Changing the Image Quality
(Compression Ratio) .................. 70
Components Guide..........................40
Indicators .........................................42
Power Saving Function
Changing the ISO Speed ................ 72
Adjusting the Tone (White Balance) 73
Adjusting the Brightness
(Exposure Compensation) ......... 74
Changing the Tone of an Image
(Auto Power Down) ....................42
Information Displayed on the Screen . 43
Switching the Display.......................45
FUNC. Menu - Basic Operations .....46
MENU Functions - Basic Operations.. 47
Resetting the Camera......................48
(My Colors) ................................ 75
8
Changing the Composition to Shoot
(Focus Lock).............................. 76
Checking the Focus and People's
Expressions (Focus Check
Shooting Using the Viewfinder........ 77
Shooting Using a TV....................... 77
$ Customizing the Self-Timer........ 78
\ Rotating Images........................104
Transferring Images to a Computer..108
5
Getting More Out of Your
Camera............................ 79
Changing the AF Frame.................. 80
Checking the Focus and People's
Expressions (AF-Point Zoom).... 82
0 Selecting the Face to Focus On
(Face Select and Track) ............ 83
{ Designating Images for Transfer
Checking the Focus Immediately after
Shooting (Focus Check) ............ 84
Changing the Metering Mode.......... 8
% Shooting with AF Lock.............. 85
& Shooting with AE Lock.86
( Shooting with FE Lock .
Denng Images for Printing
8
Customizing the Camera
....................................... 117
Slowing Down the Shuter S
(Long Shutter ode)..........8
Changing Functions ......................118
Changing Shooting Functions .......121
6
Using VariouFuctions
for Movies....................... 89
9
Useful Information for Using
the Camera ................... 125
Changing the Movie Mode.............. 90
Changing the Image Quality in X... 90
Shooting Movies With Fixed
Exposure Settings...................... 91
Other Shooting Functions ............... 92
Playback Functions......................... 92
Using Household Power................126
Using a Supplementary Flash .......126
Handling Precautions ....................127
You Think There is a Problem.......128
Error Messages.............................132
Functions Available in
Each Shooting Mode................134
Menus............................................136
Specifications ................................140
Index..............................................142
7
Using Various Playback
and Other Functions...... 93
Quickly Finding Images................... 94
; Organizing Images by Category
(My Category)............................ 96
k Magnifying Images..................... 97
. Viewing Slideshows.................... 98
9
Safety Precautions
•
•
•
Before using the camera, please ensure that you read the safety precautions
described below. Always ensure that the camera is operated correctly.
The safety precautions noted on the following pages are intended to prevent injuries
to yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you
use.
Warnings Denotes the possibility of serious injury or death.
Cautions Denotes the possibility of injury or damage to the equipment.
Warnings
Equipment
• Do not look through the camerwfinbright light sources (the sun,
etc.).
Exposure to the intense light meyeght.
• Store this equipmet ouof thchildren and infants.
Strap: Putting the sp around a cck could result in asphyxiation.
Memory card, day/dbatteryDangerous if accidentally swallowed. If this occurs,
contact a doctor immeately.
• Do not trigger the flash iclose proximity to human eyes.
Exposure to the intense light produced by the flash may damage eyesight. In
particular, remain at least one meter (39 inches) away from infants when using the
flash.
• Do not attempt to disassemble or alter any part of the equipment that is not
expressly described in this guide.
• To avoid the risk of injury, do not touch the interior of the camera if it has been
dropped or otherwise damaged.
• Stop operating the camera immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not allow liquids or foreign objects to enter the camera.
This could result in fire or electrical shock.
If liquid or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the batteries.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
• Use only recommended power sources.
10
Safety Precautions
Batteries
• Use only recommended batteries.
• Do not place batteries near or in direct flame.
• Do not let batteries come into contact with water (e.g. sea water) or other
liquids.
• Do not attempt to disassemble, alter or apply heat to batteries.
• Avoid dropping or subjecting batteries to severe impacts.
This may cause explosions or leaks, resulting in fire, injury and damage to the
surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing
contacts these substances, immediately flush with water and seek medical
assistance.
• Before you discard batteries, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
Caution
• Do not aim the camera at bright lighes (the s, etc.).
Doing so may cause malfudamthe image sensor (CCD).
• Be careful not to bang thr suect it to strong impacts or shocks
when hanging it y e st
• Be careful not bump or pngly on the lens.
This could lead injury or damage the camera.
• When using the mera n a beach or at a windy location, be careful not to
allow dust or sand ter the camera.
This may cause the camera to malfunction.
• Avoid using, placing or storing the camera in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40° C (104° F).
- Humid or dusty areas.
These could cause leakage, overheating or explosion, resulting in fire, burns or other
injuries. High temperatures may also cause deformation of the casing.
• Remove and store the batteries when you are not using the camera.
If the batteries are left inside the camera, damage caused by leakage may occur.
• Do not use the flash with dirt, dust or other items stuck to the surface, or when
covering the flash with your fingers or clothing.
This may cause the camera to malfunction.
11
LCD Monitor Precautions
• Do not sit in a chair with the camera in your pocket.
Doing so may cause malfunction or damage the LCD monitor.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the LCD monitor.
If this occurs, it may cause malfunction or damage the LCD monitor.
• Do not attach accessories to the strap.
Doing so may cause malfunction or damage the LCD monitor.
12
Getting Started
This chapter explains how to prepare for shooting and shooting in
A mode, as well as how to play back, ease and print images.
Attaching the Wrist Strap/Hohe Caera
• Use the included strap td drng the camera during use.
• Keep your arms tight ar boy while holding the camera firmly by
the sides. Be sre hat s do not touch the flash.
Wrist strap
13
Inserting the Batteries and Memory Card
Insert the included batteries and memory card into the camera.
Check the card’s write-protect tab.
● If the memory card has a write-protect tab,
you will not be able to take images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
● Slide and hold the cover lock
, then
slide and open the cover
as shown.
Insert the batteries.
● Insert the batteries with (+) and (-) sides
oriented correctly.
Insert the memory card.
● Insert the memory card with the label in
the direction shown until it clicks into
place.
● Be sure the card is oriented correctly.
Inserting the card in the wrong direction
could damage the camera.
Label
14
Inserting the Batteries and Memory Card
Approximate Number of Shots That Can Be Taken
Alkaline Batteries
(Supplied)
NiMH Batteries
(Sold Separately)
Power Source
LCD monitor on*
LCD monitor off
220
650
8
450
1000
10
Number of
Shots
Playback Time (Hours)
* The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Depending on the shooting conditions, the actual number of shots that can be taken
may be less.
• Depending on the brand of alkaline batteries used, the number of shots that can be
taken may vary widely.
• The values for NiMH batteries are based on fully chargeatteries.
Compatible Batteries
AA-size alkaline batteries and Canon ANiMH teries (sold separately)
(p. 36).
Can any other battesed
We cannot recommnd the use ther batteries than those listed above
because performane varies widely.
Why use NiMH batteries?
They last much longer than alkaline batteries, especially in cold weather.
Battery Charge Indicator
When battery charge is low, an icon or message will appear on the screen. If the
batteries are charged, the icon or message will not display.
Display
Summary
Battery charge is low. Prepare new batteries to
continue using the camera.
The batteries are depleted. Insert new
batteries.
“Change the batteries.”
16
Inserting the Batteries and Memory Card
Approximate Number of Shots That Can Be Saved in a Memory
Card
Memory Card
32 MB (supplied)
11
2 GB
749
8 GB
2994
Number of Shots
• Values are based on a camera at default settings.
• The number of shots that can be saved will vary depending on camera settings, the
subject and the memory card used.
How do you check the number of shots that can be saved?
The number of shots that can be saved appear on the screen when the camera
is in Shooting Mode (p. 22).
Number of shots that
can be saved
Compatible Memory Cards
• SD memory cards
• SDHC memory cards
• MultiMediaCards
• MMCplus memory cards
• HC MMCplus memory cards
What is the Write-Protect Tab?
SD and SDHC memory cards have a write-protect tab. If this tab is in the locked
position, “Card Locked!” will appear on the screen and you will not be able to
take or erase images.
17
Setting the Date and Time
The Date/Time menu will appear the first time the camera is turned on. Since
the date and time recorded into your images are based on these settings, be
sure to make them.
Turn on the camera.
● Press the power button.
X The Date/Time menu will appear.
Set the Date and Time.
● Press the qr bons to select a setting.
● Press the op btons to set a value.
Make the setting.
● Press the m button.
X Once the date and time have been set,
the Date/Time menu will close.
18
Setting the Date and Time
Changing the Date and Time
You can change the date and time as needed.
Display the menus.
● Press the · button.
Select [Date/Time] in the 3 tab.
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Date/
Time], then press the m button.
Change the date and time.
● Follow Steps 2 and 3 on the left page to
change the date and time.
● To close the menus, press the · button.
Reappearing Date/Time Menu
• Set the correct date and time. If you have not set the date and time, the Date/
Time menu will appear each time you turn on the camera.
• If you removed the batteries from the camera, it is possible that the Date/Time
settings are deleted after approximately 3 weeks. If this occurs, set the date and
time again.
This camera is equipped with a built-in rechargeable lithium ion battery to
save the Date/Time settings. You can recharge the battery when inserting
AA-size alkaline batteries or using the separately sold AC adapter, within
approximately 4 hours. You do not need to turn the camera on for
charging the battery.
19
Setting the Display Language
You can change the language displayed on the screen menus and
messages.
Set to Playback mode.
● Press the 1 button.
Display the language menu.
● Press and hold the m button
, then
press the · button
.
Set the disply anguage.
● Prepqr uttons to select a
languhen presthe m button.
e tdisplay language has been set,
nguge menu will close.
You can also hange the lage by pressing the · button, in the 3
tab, selecting angua].
20
Pressing the Shutter Button
The shutter button has two stops. To take images that are in focus, be sure
to first press the shutter button lightly (halfway) to focus, then take the shot.
Press halfway (lightly to the first
stop).
X The camera focuses and automatically
makes necessary settings for shooting,
such as adjusting brightness and color.
X When the camera focuses, it will beep
twice and the indicator will light green.
Press fully (to the second stop).
X The camera kes the shot.
If you just pthe ton flly without pausing halfway, the
images ytake may focus.
21
Taking Pictures
The camera can automatically make all settings so that you can shoot simply
by pressing the shutter button (Auto mode).
Turn on the camera.
● Press the power button.
X The start-up sound will play, and the start-
up image will appear.
● Pressing the power button again will turn
off the camera.
Select a shooting mode.
● Set the mode dial to A.
Compothe sot of your subject.
● Movzoom ler towards i will
om your subject making it appear
er. oving the lever towards j will
out rom your subject making it
ar smaller.
Focus.
● Press the shutter button lightly (halfway)
to focus.
X When the camera focuses, it will beep
twice and the indicator will light green
(orange when the flash will fire).
Indicator
X Green AF frames appear where the
subject is in focus.
AF Frame
22
Taking Pictures
Shoot.
● Press the shutter button fully.
X The camera will play the shutter sound
and shoot. The flash will automatically fire
in low light conditions.
X The indicator will blink green while the
image is recorded to the memory card.
X The image will appear on the screen for
about two seconds. You can continue
shooting while the image displays.
What if...
• nothing displays when the camera is turned ?
Press the ⁄ button to turn on the p. 43).
• the camera does not play any sou
Pressing the ⁄ button wng ohe camera power will turn off all
sounds except for warnino tn on sound, press the · button,
select the 3 tatheseleUse the qr buttons to select [Off].
• the image coms out dark ehe flash fired when shooting?
Subject is too faway fothe flash to reach. Shoot the image within the
effective flash rangof proximately 30 cm – 4.0 m (1.0 – 13 ft.) at maximum
wide angle (j side), and approximately 30 cm – 2.0 m (1.0 – 6.6 ft.) at
maximum telephoto (i side).
• the indicator blinks yellow and the camera only beeps once when the
shutter button is pressed halfway?
Your subject is too close. Move about 50 cm (1.6 ft.) or more away from your
subject. Press the shutter button again halfway, making sure the indicator does
not blink yellow before taking the picture.
• the screen turns off when you take an image?
When flash recharging begins, the indicator may blink orange and the screen
may turn off. When recharging ends, the screen turns on again.
• the lamp lights?
The lamp (Red-Eye Reduction Lamp) lights in order to reduce the red-eye effect
that occurs when shooting in dark conditions using the flash. It also emits when
assisting the focus (AF-assist Beam).
23
Viewing Images
You can view the images you have taken on the screen.
Set to Playback mode.
● Press the 1 button.
● The last image you took will appear.
Select an image.
● Pressing the q button will cycle through
the images in the reverse order they were
taken.
● Pressing the r btton will cycle through
the images in thorder they were taken.
● The images che more quickly if you
keer buttos pressed, but they
will acoarse.
Recommenation for beginners: 9 Easy mode
Just setting the mode dial t
This mode is recommended for beginners, who are not familiar using cameras.
Easy mode) allows you to shoot and playback images.
Set the mode dial to 9.
Shoot.
● Press the shutter button lightly (halfway)
to focus.
X A green AF frame displays where the
subject is in focus.
Easy mode
● Press the shutter button fully to shoot.
Viewing Images.
● Press the 1 button.
● Press the qr buttons to display the
images you want to view.
24
Erasing Images
You can select and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Set to Playback mode.
● Press the 1 button.
X The last image you shoot will appear.
Select an image to erase.
● Press the qr buttons to select an image
to erase.
Erase the image.
● Press the p button.
● Press the qr buttons to select [Erase],
then press the m button.
X The displayed image will be erased.
● To exit instead of erasing, press the qr
buttons to select [Cancel], then press the
m button.
25
Printing Images
You can easily print the images you have taken if you connect the camera to
a PictBridge compliant printer (sold separately).
Items to Prepare
• Camera and PictBridge compliant printer (sold separately)
• Interface cable supplied with the camera (p. 2)
Turn off the camera and printer.
Connect the camera to the printer.
● Open the camera’s terminal cover and
insert the smalleplug of the interface
cable in the reon shown.
● Inserable’rger plug into the
printconnecn details, refer to the
er gprovided with the printer.
on te printer.
Turn on the camera.
● Press the 1 button to turn on the camera.
X
will appear on the screen, and the
c button will light blue.
26
Printing Images
Select an image to print.
● Press the qr buttons to select an image.
Print images.
● Press the c button.
X Printing will start and the c button will
blink blue.
● If you want to print additional images,
repeat Steps 5 and 6 after printing has
completed.
● After pring as completed, turn off the
caa and nter, and unplug the
icable.
Refer to the Direct PGufor details on printing, including
printing with direct pible rinters.
Canon-Brand ctBrge Compliant Printers (Sold Separately)
By connecting your camera to one of the Canon-brand PictBridge compliant
printers below, you can print your images just like photos without having to
use a computer.
Compact Photo Printers
(SELPHY series)
Bubble Jet Printers
(PIXMA series)
For more information, visit your nearest Canon retailer.
27
Shooting Movies
Setting the mode dial to E (Movie) allows you to shoot movies.
Set to Movie mode.
● Set the mode dial to E.
● Confirm that
displays on the screen.
Recordable Time
Comphe shoof your subject.
ing e zoom lever towards i will
in oyour subject making it appear
r. Moving the lever towards j will
zoom out from your subject making it
appear smaller.
Focus.
● Press the shutter button lightly (halfway)
to focus.
X When the camera focuses, it will beep
twice and the indicator will light green.
Indicator
28
Shooting Movies
Shoot.
● Press the shutter button fully. The camera
will start shooting the movie.
● Once shooting begins, take your finger off
the shutter button.
X [ REC.] and the elapsed time will appear
on the screen.
●
Do not touch the microphone while shooting.
● Do not press any buttons other than the
shutter button. The sound that buttons
make will be recorded in the movie.
Elapsed Time
Microphe
Stop shooting.
● Press the shutter button fully again.
X The camera will beep once and stop
shooting the movie.
X The indicator will blink green while the
movie is recorded to the memory card.
X Shooting will automatically stop when the
memory card fills.
Approximate Recording Time
Memory Card
32 MB (supplied)
15 sec.
2 GB
8 GB
Recording Time
16 min. 47 sec.
1 hr. 7 min. 6 sec.
• Recording times are based on a camera at default settings.
• Remaining time can be checked on the screen in Step 1.
29
Viewing Movies
You can view the movies you have shot on the screen.
Set to Playback mode.
● Press the 1 button.
X The last image or movie you shot will
appear.
Select a movie.
● Press the qr buttons to select a movie,
then press the m button.
●
appears on movies.
X The movie contrpanel will appear.
Ply the movie.
● Press the qr buttons to select
press the m button.
, then
● Pressing the m button will pause/resume
the movie.
● Press the op buttons to adjust the
volume.
X After the movie finishes,
appears.
30
Transferring Images to a Computer
You can use the included software to transfer the images you have taken to
a computer.
Items to Prepare
• Camera and computer
• Canon Digital Camera Solution Disk supplied with the camera (p. 2)
• Interface cable supplied with the camera (p. 2)
System Requirements
Install the software on a computer meeting the following requirements.
Windows
OS
Windows Vista (including Sece Pack 1)
Windows XP Service Pa2
Computer model
CPU
The above OS be pretalled on computers with built-
in USB ports.
Windosta:
Win
Pentium 1.3 GHz or higher
Pentium 500 MHz or higher
RAM
Win
Wind
512 MB or more
256 MB or more
Interface
USB
Free Hard Disk Spe • Cnon Utilities
ZoomBrowser EX:
- PhotoStitch:
200 MB or more
40 MB or more
Display
1,024 x 768 pixels/High Color (16 bit) or better
Macintosh
OS
Mac OS X (v10.4 – v10.5)
Computer model
The above OS should be pre-installed on computers with built-
in USB ports.
CPU
RAM
PowerPC G4/G5 or Intel Processor
Mac OS X v10.5:
Mac OS X v10.4:
512 MB or more
256 MB or more
Interface
USB
Free Hard Disk Space • Canon Utilities
- ImageBrowser:
300 MB or more
50 MB or more
- PhotoStitch:
Display
1,024 x 768 pixels/ 32,000 Colors or better
31
Transferring Images to a Computer
Preparations
Windows XP and Mac OS X v10.4 are used for these explanations.
Install the software.
Windows
Place the CD-ROM in the computer’s
CD-ROM drive.
Begin installation.
● Click [Easy Instaation], and follow the
onscreen insucns to proceed with the
insta.
Click [rt] or [Fnish].
en yu click [Restart], the computer
sta
Rve the CD-ROM.
● Remove the CD-ROM when your desktop
screen appears.
Macintosh
● Place the CD-ROM in the computer's CD-
ROM drive and double-click the
.
X The screen on the left displays.
● Click [Install], and follow the onscreen
instructions to proceed with the
installation.
32
Transferring Images to a Computer
Connect the camera to the
computer.
● Turn off the camera.
●
Open the camera’s terminal cover and insert
the smaller plug of the interface cable in the
direction shown.
● Insert the cable’s larger plug into the
computer’s USB port. For connection
details, refer to the user guide provided
with the computer.
Turn on the amera.
● Press the 1 utton to turn on the camera.
X Tnectiobetween the camera and
cr is now established.
en CameraWindow.
s
● Select [Canon CameraWindow] and click
[OK].
X CameraWindow will appear.
● If CameraWindow does not appear, click
the [Start] menu and select [All Programs]
or [Programs], followed by [Canon
Utilities]
[CameraWindow]
[CameraWindow]
[CameraWindow].
X The Direct Transfer menu appears on the
camera’s screen, and the c button will
light blue.
33
Transferring Images to a Computer
Macintosh
X CameraWindow will appear.
● If it does not appear, click the
[CameraWindow] icon on the Dock (the
bar which appears at the bottom of the
desktop).
X The Direct Transfer menu appears on the
camera’s screen, and the c button will
light blue.
You cannot shoot while the Direct Transfer menu displays.
Transferring Images with a Comuter
Transmage
● Click fer Untrnsferred Images].
mas not previously transferred will
nsfred to the computer.
the transfer finishes, turn off the
camera and unplug the cable.
● For further operations, refer to the
Software Starter Guide.
34
Transferring Images to a Computer
Transferring Images with the Camera
Select [New Images].
● Press the op buttons to select [New
Images].
● If the screen on the left is not showing,
press the · button.
Tranr imes.
● Pe c utton.
All ages not previously transferred will
e trsferred to the computer.
ter the transfer finishes, turn off the
camera and unplug the cable.
● For further operations, refer to the
Software Starter Guide.
Transferred images will be sorted by date and saved in separate folders in
the My Picture folder for Windows or the Picture folder for Macintosh.
35
Accessories
Supplied with Camera
*1
AV Cable AVC-DC400
*1
Interface Cable IFC-400PCU
Memory Card
(32 MB)
Wrist Strap
WS-800
Canon Digital Camera
AA-size Alkaline Batt
(x2)
Solution Disk
AC Adapter kit
ACK800
Battery and Charger Kit
*3
CBK4-300
Battery Charger
CB-5AH
AA-size NiMH
batteries
(NB-3AH x4)
Compact Power
Adapter CA-PS800
Power Cord
*1 Also available for purchase separately.
*2 See the user guide supplied with the printer for more information on the printer and
interface cables.
*3 Battery and Charger Kit CBK4-200 may also be used.
36
Accessories
Video IN Terminal
Audio IN Terminal
TV
*2
Bubble Jet Printers
(PIXMA series)
*2
Compact Photo Printers
(SELPHY series)
USB Card
HigoweFlash
HF-DC1
Windows/Macintosh
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
37
Separately Sold Accessories
The following camera accessories are sold separately.
Some accessories are not sold in some regions, or may no longer be
available.
Power Supplies
• Battery and Charger Kit CBK4-300
This kit includes both a dedicated charger unit and four rechargeable AA-size
NiMH (nickel metal hydride) batteries. Recommended for powering the camera
for an extended period of time.
The batteries (NiMH Battery NB4-300) are also available separately.
• AC Adapter Kit ACK800
This kit lets you power the camera using household power. Recommended for
powering the camera for an extended period of time or when connecting to a
computer. Cannot be used to charge the batteries inde the camera.
Other Accessories
• High-Power Flash HF-DC1
This attachable supplementary flash caate subts that are too distant
for the built-in flash.
When connecting to and using a household power outlet, use only AC
Adapter Kit ACK800 (rated input: 100-240 V AC 50/60 Hz, rated output:
3.15 V DC). Using anything else can cause fire, overheating, or electrical
shock.
USA and Canada only:
The Nickel-Metal Hydride battery is recyclable.
Please call 1-800-8-BATTERY for information on how to
recycle this battery.
38
Components Guide
a
Zoom Lever
e
f
g
j
Shutter utton (p. 21)
Moe D
Shooting: j (Wide Angle) /
i (Telephoto) (p. 22)
Playback: g (Index) /
k (Magnify) (p. 94)
Lamp (AF Assist Beam, Red-
Reduction Lamp, Self-Timer
(pp. 23, 122, 123)
Power on (p. 21)
sh (p. )
pod Sock
b
Memory Card Slot /Battery Cover
p. 14)
k
l
Memory Card Slot /Battery Cover
Lock (p. 14)
c
d
Microphone (p. 29
Lens
Wrist Strap Mount (p. 13)
Mode Dial
Turn the mode dial to change the shooting mode. Turning the mode dial
while in Playback mode will switch to the Shooting mode.
Program AE mode (p. 67)
You can set various functions in
order to take the picture you want.
Movie mode (pp. 28, 89)
Auto mode (p. 22)
The camera makes settings
automatically for shooting.
Easy mode (p. 54)
Various Scenes mode (p. 53)
You can shoot worry-free pictures
just by pressing the shutter button.
You can shoot with optimal settings
for the scene you wish to shoot.
40
Components Guide
a
b
c
d
e
f
g
Viewfinder (p. 77)
j
k
l
· (MENU) Button (p. 47)
Indicators (p. 42)
⁄ (DISP.) Button (pp. 43, 45)
ISO . 72) / d (Jump) (p. 95) /
on
Speaker
Screen (LCD monitor) (p. 43)
1 (Playback) Button
DC IN (Power input) Terminal
A/V OUT (Audio/Video ou
DIGITAL Terminal (pp. 2
0 (Face Selecon (
c (Print/Sre) Button
(pp. 26, 124)
e
(Mro) (p. 64) /
u
(Infinity) (p. 65) /
q Butto
m (Function/Set) Button
h (Flash) (p. 59) / r Button
W (Continuous) (p. 69) / Q (Self-
timer) (p. 60) /a (Single Image Erase)
(p. 25) /p Button
o
p
h
i
1 Button
When the lens is extended, you can use the 1 button to switch between the
Shooting and Playback modes. When the lens is retracted, you can use the
button to turn the camera on and off in Playback mode.
Lens is extended
1
Shooting mode
Playback mode
Lens is retracted
1
Power off
Playback mode
41
Indicators
The indicators on the back of the camera (p. 41) will light or blink under the
following conditions.
Position Colors Status
Operation Status
Shooting preparation complete (p. 22) /when connected
to a computer/display turned off
Lights
Green
Camera starting up/image recording/reading/erasing/
transferring (when connected to a computer)
Upper
Indicator
Blinks
Lights Shooting preparation complete (flash on) (p. 22)
Blinks Camera shake warning, flash charging (p. 59)
Lights Shooting in Macro/AF Lock mode
Orange
Yellow
Lower
Indicator
Blinks When the camera cannot focus (p. 23)
When the indicator blinks green, data is being corded/read/erased or
various information is being transmitted.
Do not turn off the power, open the memory cslot/battery cover, shake
or jolt the camera. These actions rupt thimage data, or cause
the camera or memory card to man.
Power Saving Fun(Auto Power Down)
To save battery pow, the cmera shuts down automatically when it is not
operated for a certain te.
Power Saving Shooting Mode
About 1 minute after the camera is not operated, the screen will turn off.
After about 3 more minutes, the lens will retract and the power turns off.
When the screen has turned off but the lens has not retracted yet, pressing
the shutter button halfway (p. 21) turns on the monitor and shooting can be
continued.
Power Saving Playback mode
About 5 minutes after the camera is not operated, the power turns off.
• You can turn off the Power Saving Function (p. 118).
• You can adjust the time before the screen turns off (p. 119).
42
Information Displayed on the Screen
Shooting (Information Display)
a
b
Shooting Mode
o
Aotate* (p. 120)
BatteCharge Indicator (p. 16)
Grid Lin(p. 123)
Exposure Compensation/Long
Shutter mode (pp. 74, 88)
White Balance (p. 73)
My Colors (p. 75)
c
d
e
f
g
h
i
j
k
l
m
n
AF Frame (p. 80)
Spot AE Point Frame (p. 85)
AE Lock/FE Lock (pp. 86, 87)
AF Lock (p. 76)
Metering Mode . )
Compression atio (p. 70)
Recording Pix(p. 70)
Digital Tele-Conrter (62)
Zoom Factor (p. 61)
s
t
u
v
Create Folder (p. 120)
Still Images: Recordable Shots (p. 17)
Movies: Remaining Time /Elapsed
Time (p. 29)
Macro/Infinity Mode (pp. 64, 65)
ISO Speed (p. 72)
w
x
y
z
Exposure Shift Bar (p. 91)
Shutter Speed
Flash (p. 59)
Red-Eye Correction (p. 122)
Drive Mode (pp. 60, 69, 78)
Aperture Value
Image Stabilizer (p. 124)
*
:Standard,
:Right side down,
:Left side down
This function may not operate correctly when the camera is pointed straight up or down.
43
Information Displayed on the Screen
Playback (Detailed Information Display)
a
b
c
d
e
f
g
h
i
j
k
l
m
n
Print List (p. 111)
o
s
t
ISO pe(p. 72)
Auto Category/My Category (p. 96)
Shooting Mode
perture alue
sh (p. 5
Shutter Speed
acro/Infinity Mode (pp. 64, 65)
File Size (p. 71)
Exposure Compensation (p.
White Balance (p. 73
ill Images: Recording Pixels (p. 71)
Movies: Movie Length (p. 91)
Red-Eye Correction /Resize
Histogram
Sound Memo (p. 7)
u
Compression Ratio . 70)
Recording Pixels (p. 70
Metering Mode (p. 85)
Battery Charge Indicator (p. 16)
Folder Number-File Number (p. 119)
Displayed image number and total
number of images
(pp. 102, 105)
v
w
x
y
Protect (p. 102)
My Colors (p. 75)
Red-Eye Correction (pp. 105, 122)
Shooting Date and Time (p. 18)
Histogram
● The graph that appears in Detailed
Information Display is called the
histogram. The histogram shows the
distribution of brightness of an image.
When the graph approaches the right
side, the image is bright, but when it
approaches the left side, the image is
dark, and in this way you can check the
exposure.
High
Low
Dark
Bright
44
Switching the Display
You can switch the display using the ⁄ button.
Shooting
No Information Display
Information Display
Off
Playback
No Information
Display (Off)
Simple
D
etailed Information
Display
Focus Check
Display
You can also itthe display by pressing the ⁄ button while the
image displays shortly after shooting. However, the Simple Information
will not display. You can set the display that displays first. Press the ·
button to select the 4 tab. Then choose [Review Info].
Display for Shooting in Dark Conditions during Shooting
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual
image recorded may be different. Noise may appear and the movement of
the subject on the screen may appear somewhat jagged. This has no effect
on the recorded image.
Overexposure Warning during Playback
In Detailed Information Display, overexposed areas of the image flash on the
screen.
45
FUNC. Menu - Basic Operations
You can set various functions using the FUNC. menu. The settings that you
can choose from the FUNC. menu are different depending on the shooting
mode (p. 40).
Select a shooting mode.
● Set the mode dial to the desired shooting
mode.
Display the FUNC. menu.
● Press the m button.
Select a menu item.
● Press the op bttons to select a menu
item.
X The sable ings for the menu item
appe lowepart of the screen.
ct etting.
the qr buttons to select a setting.
Menu Items
option settings are only available by
pressing the ⁄ button after selecting a
setting.
Make the setting.
● Press the m button.
X Returns you to the shooting screen and
the setting you made will display.
For more information on the various shooting modes and combination
settings with the FUNC. menu, refer to page 134.
46
MENU Functions - Basic Operations
Various functions can be set from the menu. The menu items are organized
under categorized tabs, and the displayed tabs and menu items change,
depending on the Shooting (p. 40) or Playback mode (p. 41).
Display the menu.
● Press the · button.
Select a tab.
● Press the qr buttons to select a tab.
● You can also move the zoom lever (p. 40)
left or right to elect a tab.
Selea meitem.
● Pe op ttons to select a menu
ite
omsettings can only be set after
itching the screen using the m button.
Select a setting.
● Press the qr buttons to select a setting.
Make the settings.
● Press the · button.
X Returns you to the standard screen.
For more information on the tabs and menu items, refer to page 136.
47
Resetting the Camera
When you have mistakenly made a setting, you can reset the camera to the
default settings.
Display the menu.
● Press the · button.
Select [Reset All].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Reset
All], then press the m button.
Reset ngs.
ss tqr buttons to select [OK], then
the m button.
amera will reset to the default
settings.
Are there functions that cannot be reset?
• FUNC. menu
White balance data recorded with the Custom White Balance function (p. 73).
• The 3 tab
[Date/Time] (p. 18), [Language] (p. 20), [Video System] (p. 100)
48
Formatting Memory Cards
You should use this camera to format a new memory card, or a memory card
that has been used with other devices, before using it. Formatting a memory
card erases all data on the memory card. You cannot retrieve the erased
data. Execute adequate caution before formatting a memory card.
Display the menu.
● Press the · button.
Select [Format].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Format],
then press the m button.
rmt the memory card.
ess the qr buttons to select [OK], then
press the m button.
X The memory card will be formatted.
X When formatting has finished, the screen
will return to the menu display.
49
Formatting Memory Cards
Low Level Format
Perform low level formatting when you think that the recording/reading
speed of a memory card has dropped.
● Follow Step 1–2 on the previous page to
display the [Format] screen.
● Press the op buttons to select [Low
Level Format], then use the qr buttons to
display
.
● Press the opqr buttons to select [OK],
then press the m button.
X Low level formatting starts.
About Formatting
• The supplied memy card has been formatted.
• When the "Memory ard error" message appears, or when the camera does not
work correctly, formang thmemory card may solve the problem. Copy the
images from the memorrd to a computer or other device before formatting.
Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents
are completely deleted. Be careful when transferring or disposing of a
memory card. When disposing of a memory card, take precautions such
as physically destroying the card to prevent personal information leaks.
• The total capacity of the memory card displayed in the [Format] screen
may be less than indicated on the memory card.
• Low level formatting may take longer than standard formatting, since all
recorded data are erased.
• You can stop a low level format of a memory card by selecting [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
50
Changing Sounds
You can silence the sounds of the camera buttons or adjust the volume of
the camera sounds.
Mute Setting
Display the menu.
● Press the · button.
Select [Mute].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Mute],
then use the qr buttons to select [On].
Adjusting the Vo
play the menu.
● Press the · button.
Select [Volume].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Volume],
then press the m button.
51
Changing the Image Display Time
Adjust the volume.
● Press the op buttons to select an item,
then use the qr buttons to adjust the
volume.
Changing the Image DisplaTime
Images display for approximately 2 sefter beishot. You can
change the length of time the s disy.
y the menu.
● Pess the · button.
Select [Review].
● Press the qr buttons to select the 4 tab.
● Press the op buttons to select [Review],
then press the qr buttons to select the
display time.
● If you select [Off], the image will not
display.
● If you select [Hold], the image displays
until you press the shutter button halfway.
52
Shooting Special Scenes
and Using Common
Functions
This chapter explains the for bs connient Easy mode and
how to shoot various scenes witmal settings. Other common
functions, such as the d thself-timer, are also explained.
• This chapter asumes he shooting mode is set to A. For other
shooting modes efer the Functions Available in Each Shooting Mode
section (p. 134).
53
9 Just Taking Pictures (Easy Mode)
Setting the mode dial to 9 (Easy mode) allows you to shoot just by pressing
the shutter button. The camera automatically sets the optimal settings so
that you can shoot worry-free in any shooting condition.
Select a shooting mode.
● Set the mode dial to 9.
Shoot.
• Taking worry-free pictures of people
When taking pictures of people, the camera detects the faces and focuses
automatically, so that you can capture them just in the right moment.
• Shooting worry-free close-ups
Even when shooting close subjects, you do noeeto worry about the focus.
• Viewing images
Pressing the
1
button allows you to e imagyou took. A guidance
will display on the screen so you ecurely check your images.
What you can o in moe
In the Easy mode ycan use the owing operations. Other buttons cannot
be used. Therefore, u do nneed to worry about wrong operations.
Taking Pictures
(Shooting mode)
Viewing Images
(Playback mode)
Taking pictures
Switching to
Shooting mode
Zooming in and
out
Switching to
Playback mode
Viewing images
Setting the flash
to Auto or Off
Viewing images
in a slideshow
Erasing images
54
Shooting Various Scenes
The camera will make the optimal settings for the scene you wish to shoot
when you set the mode dial to a matching mode.
Select a shooting mode.
● Set the mode dial to the scene you wish to
shoot.
Shoot.
(Portrait)
Take portraits
● Produces a soft effect when
photographinpeople.
scap
ake ndscapes
or soting expansive landscapes.
(Night Snapshot)
Take snapshots at night
● Lets you take beautifully lit snapshots of
people against beautiful city nightscapes
or night backgrounds.
● If you hold the camera firmly, you can take
pictures with reduced camera shake, even
without a tripod.
(Kids&Pets)
Take shots of kids and pets
● Lets you capture subjects that move
around, such as children and pets, without
missing photo opportunities.
55
K Shooting Special Scenes
(Indoor)
Take indoor shots
● Lets you shoot indoors with natural colors.
In F, C or H, images may appear rough because the ISO speed (p. 72)
was increased to match the shooting conditions.
K Shooting Special Scenes
The camera will make the optimal settings for tsecial scene you wish to
shoot when you select a matching mod
ct hooting mode.
he mde dial to K, then press the
utton.
● Press the op buttons to select
, then
use the qr buttons to select a shooting
mode.
● Press the m button.
Shoot.
56
K Shooting Special Scenes
(Night Scene)
Take night scenes
● Lets you take beautifully lit city
nightscapes or night backgrounds.
(Sunset)
Shooting Sunsets
● Lets you shoot sunsets in vivid colors.
(Foliae)
Take hots foliage
● Lshoot es and leaves such as
neowth, autumn leaves or blossoms
vivcolors.
(Snow)
Take shots of people and snow
● Lets you take shots of properly lit people
against snowy backgrounds with natural
colors.
(Beach)
Take shots of people at the beach
● Lets you take shots of properly lit people
at the beach where reflected sunlight is
strong.
57
K Shooting Special Scenes
(Fireworks)
Take shots of fireworks
● Lets you take shots of fireworks in vivid
colors.
(Aquarium)
Take shots of aquatic life in an
aquarium
● Lets you shoot aquatic life in indoor
aquariums with natural colors.
(ISO320)
Shootiwith gh ISO speed
● Lets oot with he ISO speed set to
00. igh ISO speed the shutter
d is aster and reduces subject blur
amera shake during shooting.
ording pixels are set to
(1600 x
1200 pixels).
• In
, images may appear rough if the ISO speed (p. 72) was increased
depending on the scene.
• In
or
, attach the camera to a tripod so that the camera does not
move and blur the image. When you attach the camera to a tripod, you
are recommended to set [IS Mode] to [Off] to shoot (p. 124).
• In
, make sure the subject does not move until the shutter sound
plays, even after the flash fires.
• With
, image noise may be prominent.
58
! Turning the Flash Off
You can turn the flash off for shooting in places where using a flash is
prohibited.
Press the r button.
Select !.
● Press the qr buttons to select !, then
press the m button.
X ! will appeaon the screen.
● After takitshot, repeat the above
sto sele
.
What if the diator blinks orange and a flashing
appears?
When you press the shutter button halfway in low light conditions where camera
shake is likely, the indicator will blink orange and a flashing
will appear on the
screen. Attach the camera to a tripod so that the camera does not move.
h Turning the Flash On
Select any shooting mode other than A, and the flash will fire every time
you shoot.
• Choose h as in Step 2 in the above section "Turning the Flash Off".
• The range of the flash for shooting is approximately 30 cm – 4.0 m (1.0 –
13 ft.) at maximum wide angle, and approximately 30 cm – 2.0 m (1.0 –
6.6 ft.) at maximum telephoto.
• After taking the shot, repeat the above steps to select
.
59
Q Using the Self-Timer
Use the self-timer when you want to appear in the shot you are taking.
Press the p button.
Select a timer.
● Press the op buttons to select
for a
for a 2 second
10 second delay, or
delay, before the shot is taken.
● Press the m buon.
X The timer yosedisplays on the screen.
Shoot.
● Press the shutter button halfway to focus
on the subject, then press fully.
X The lamp blinks and the self-timer sound
plays.
X 2 seconds before the shutter releases, the
lamp and sound speed up.
● After the shot is taken, return to Step 2
and select
.
You can change the delay time and number of shots to take (p. 78).
60
Zooming in on Far Away Subjects
The digital zoom can zoom up to 16x and capture subjects too far away for
the optical zoom (p. 22). The images may appear rough, however,
depending on the recording pixel setting (p. 70) and the zoom factor used.
Move the zoom lever toward i.
● Hold the zoom lever until zooming stops.
Release the zoom lever and then
move it toward i again.
X The camera ll zoom in further on the
subject.
Image Deterioration Zwitigital Zoom
Recording Pixels
ptil Zo
Digital Zoom
No image deterioration (zoom factor appears white)
Image deterioration (zoom factor appears blue)
Zoom factor at which zooming stops for a moment (safety zoom)
Turning Off the Digital Zoom
To turn off the digital zoom, press the · button, select the 4 tab, and then
select the [Digital Zoom] menu item and [Off] option.
The focal length when using digital zoom is 35 – 560 mm (35mm film
equivalent).
61
Zooming in on Far Away Subjects
Digital Tele-Converter
The focal length of the lens can be increased by an equivalent of 1.4x and
2.3x. This enables a faster shutter speed and less chance of camera shake
than just using zoom (including digital zoom) at the same zoom factor.
The images may appear rough, however, depending on the combination of
recording pixel (p. 70) and digital tele-converter settings used.
Select [Digital Zoom].
● Press the · button.
● Select the 4 tab, then press the op
buttons to select [Digital Zoom].
Accept the ettng.
● Press qr buns to select [1.4x] or
[2.3
esshe · button will return you to
hong screen.
iew will be enlarged, and
and the
m factor will display on the screen.
● After taking the shot, select [Standard] in
[Digital Zoom].
Combinations that Cause Image Deterioration
• Using [1.4x] at a recording pixel setting of or will cause image
deterioration (the zoom factor will display in blue).
• Using [2.3x] at a recording pixel setting of
deterioration (the zoom factor will display in blue).
,
or
will cause image
• The respective focal lengths when using [1.4x] and [2.3x] are equivalent
to 49 – 196 mm and 80.5 – 322 mm (35mm film equivalent).
• The digital tele-converter cannot be used together with the digital zoom.
62
Inserting the Date and Time
The date and time an image was shot can be recorded in the lower right
corner. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 18).
Select the recording pixels.
● Press the m button.
● Press the op buttons to select
.
Select
(p. 70).
● Press the qr buttons to select
.
● If you want to insert the date and time,
to select [Da& Time], then press the m
button.
hoo
he gay areas on the top and bottom of
e screen will not be printed. Be sure
your subject is within the printable area
when you shoot.
Inserting and Printing the Date and Time in Images Not Shot in
• Use the DPOF print settings (p. 111) to print.
• Use the included software to print.
Refer to the Software Starter Guide for details.
• Connect the camera to a printer to print.
Refer to the Direct Print User Guide for details.
• Images shot in
are shot with a small number of recording pixels.
Therefore, printing on paper larger than postcard or L size will result in
rough photo prints (p. 71).
• The gray areas on the top and bottom of the screen will not be printed;
however, the entire image displayed will be recorded.
63
e Shooting Close-ups (Macro)
You can shoot an object at a close distance or approach an object to shoot
the close-up of it. The focusing range from the end of the lens is 3 – 50 cm
(1.2 in. – 1.6 ft.).
Press the q button.
Select e.
● Press the qr buttons to select e, then
press the m button.
X e will appear on he screen.
● After taking thot, repeat Step 2 and
sele
Using
When shooting with the camera attached to a tripod, set the self-timer to
avoid camera shake.
to
The edges of the image may darken if the flash fires.
64
u Shooting Far Away Subjects
Select any shooting mode other than A, then use Infinity mode when the
subject is further than approximately 3 m away from the end of the lens.
● Select any shooting mode other than A
and follow Step 2 as described in
“Shooting Close-ups (Macro)” on the
previous page. Then select u.
● u displays on the screen.
● After taking the shot, repeat Step 2 of the
previous page and select
.
65
66
G Shooting in Program AE
The camera automatically sets basic functions, but unlike in A mode or
shooting various scenes, you can freely make your own settings.
* AE stands for Auto Exposure
Set the mode dial to G.
Make settings according to
purpose. (pp. 69 – 78)
Shoot.
What if shutter speed and aperture vale are displayed in
red?
If a correct exposure cannot be obtained pressinthe shutter button
halfway, shutter speed and aperture valuown in d. Try the following
settings to obtain the correct expe.
• Turn on the flash. (p. 59)
• Choose a higher ISsped. (
• Change the meterimode (p. 8
68
W Continuous Shooting
You can shoot continuously (about 1.3 shots/second).
Press the p button.
Select W.
● Press the op buttons to select W, then
press the m button.
Shoot.
X
As long as yohold the shutter button down,
the camera shoot successive images.
Shooting until the memord becomes full
If you use a low level form) mmory card, you can continuously shoot
until the memory rd full
• As the nmber of images increases, the shooting intervals may take
longer.
• If the flash fireshooting intervals may take longer.
69
Changing the Recording Pixels (Image Size)
You can choose from 7 types.
Select the recording pixels.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
• If you select
or
, you cannot use the Digital Zoom (p. 61) or
Digital Tele-Converter (p. 62).
• The gray areas in
will not be printed; howver, the entire image
displayed will be recorded.
Changing the Imaguali(Compression Ratio)
You can choose from 3 tpes quality, in order from high to low:
(Superfine),
(Fie),
(No
Select the compression ratio.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
70
Changing the Image Quality (Compression Ratio)
Approximate Values for Recording Pixels and Compression Ratio
Recordable Images/Memory Card
Image
Quality (Approx. KB)
Size
Recording Pixels
32 MB
2 GB
8 GB
(supplied)
4332
2565
1226
2720
1620
780
6
448
749
1792
2994
(Large)
10 M/3648 x 2736
11
23
1536
714
6140
10
2855
(Medium 1)
6 M/2816 x 2112
17
1181
2363
960
4723
37
9446
2002
1116
556
14
3837
(Medium 2)
4 M/2272 x 1704
6
1707
3235
1862
3235
6146
6830
10245
15368
6822
12927
7442
10
55
(Medium 3)
2 M/1600 x 1200
52
12927
24562
27291
40937
61406
78
99
9
111
171
270
(Small)
0.3 M/640 x 480
84
(Date Stamp)
2 M/1600 x 1200
558
52
3235
12927
3243
1920
918
8
596
1007
2048
2384
4026
8187
(Widescreen)
3648 x 2048
15
31
• The figures in this table are determined by Canon measuring conditions and may vary
depending on subject, memory card brand, camera settings or other factors.
Approximate Values for Paper Size
●
Suitable for sending images as e-mail
attachments.
For printing on wide size paper.
A3
●
A4, Letter size
2L size
Postcard size
L size
71
Changing the ISO Speed
Press the o button.
Select a menu item.
● Press the op buttons to select a menu
item, then press the m button.
Approximate Values for ISO Speed
Automatically sets the optimd for sting mode and shooting
condition.
Automatically sets timad, not only for shooting mode and
shooting conditiofor bject or camera motion. Depending
on the scene, the be shigher than in ISO Auto, resulting in
less sject blur ashake.
ne weather coon, outdoor shooting.
Low
Cldy,
Twilig
Night view
Dark indoor
High
Setting the optimal ISO Speed
• Lowering the ISO speed results in crisper images.
• Raising the ISO speed results in a faster shutter speed and thus in reduced
camera shake. The flash reaches a greater distance to the subject. However,
images will be coarser.
• When the camera is set to
or
, you can press the shutter button
halfway to display the automatically set ISO speed.
• You can raise the ISO speed even higher with the ISO 3200 setting
(p. 58).
72
Adjusting the Tone (White Balance)
The White Balance (WB) function adjusts the optimal white balance for
natural looking colors.
Select a white balance setting.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
● After shooting, return the setting to
.
Auto
Automatically sets the optimal whitbalance for the location.
Fine weather condition, outdoshting.
Cloudy, shady, twilight cditions
Daylight
Cloudy
Tungsten
Tungsten, bulb-type ngth fluescent.
Warm-white, ol-whitm-white-tye (3-wavelength)
fluorescen
Fluorescent
Fluorescent H Daylight flaylit-type (3-wavelength) fluorescent.
Custom anually seom white balance.
This functicannbe used when My Colors is set to
or
.
Custom White Balance
You can adjust the white balance to the light source at the shooting location
and shoot with the appropriate color. Make sure that you set the white
balance under the light source of the shooting scene.
● Follow the Step 2 described above and
select
. Make sure the entire screen is
filled with the white subject, then press the
⁄ button.
X The tint on the screen will change when
the white balance data is set.
● After shooting, return the setting to
.
73
Adjusting the Brightness
(Exposure Compensation)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Select the exposure
compensation.
● Press the m button, then use the op
buttons to select
.
Adjust the Brightness.
● While watching the screen, press the qr
buttons to adjushe brightness, then
press the m bun.
● After ticture s been taken, return
the o
(ro).
74
Changing the Tone of an Image (My Colors)
You can change the tone of an image such as sepia or black and white when
shooting.
Select a My Colors setting.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
● After shooting, return the setting to
.
My Colors Off
Vivid
–
Emphasizes the cntraand color saturation for a vivid
impression.
Tones dontrast d color saturation for neutral
hues.
Neutral
Sepia
B/W
ones
whi.
djust image contrast, sharpness and color
sin 5 gradations.
Custom Col
Custom Colo
● Follow the Step 2 described above and
select
, then press the ⁄ button.
● Press the op buttons to select an item,
then use the qr buttons to choose a
value, then press the m button.
● The more to the right, the value gets
stronger/deeper, the more to the left, the
value gets weaker/lighter.
75
Changing the Composition to Shoot (Focus Lock)
While you press the shutter button halfway, focus and exposure are fixed.
You can now recompose and shoot. This is called focus lock.
Focus on a subject.
● Center a subject at the same focal
distance in the screen, and press the
shutter button halfway.
● Confirm that the AF Frame on the subject
is green.
Recompose.
● Hold the shutter utton pressed halfway
and recompose e scene.
Shoot.
● Presutter bton fully.
76
Shooting Using the Viewfinder
If you want to save battery power, you can use the viewfinder for shooting,
instead of the screen. Operations for shooting are the same as when using
the screen; however, the view in the viewfinder and the image taken may
differ.
Turn off the screen (p. 45).
● Press the ⁄ button to turn off the screen.
Compose the scene and shoot.
● Use the viewfinder to compose the scene
and shoot.
Shooting Using a TV
You can use a TV to display the cacreen
• Connect the camera to a s deed in "Viewing Images on a TV"
(p. 100), and set the shode o shoot.
• Operations for oting me s when using the camera’s screen.
77
$ Customizing the Self-Timer
You can set the time delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
Press the p button.
Select
.
● Press the op buttons to select
quickly press the · button.
, then
Make gs.
ss top buttons to select an item,
use he qr buttons to choose a
, then press the m button.
What if the number of shots is set to more than 2 shots?
• Exposure and white balance settings are fixed to the first shot.
• When you set the time delay to more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases.
• If the flash fires, the shooting interval may take longer.
• If you set a high number of shots, the shooting interval may take longer.
• If the memory card becomes full, shooting stops automatically.
78
Changing the AF Frame
You can change the AF (Auto Focus) mode to take the shots you want.
Select [AF Frame].
● Press the · button and select the 4
tab.
● Press the op buttons to select
[AF Frame].
Make the setting.
● Press the qr buttons to select a setting.
Face Detect
• Recognizes people's faces and focuses, adsts xposure (evaluative
metering only) and white balance (
ly) for ooting.
• When the camera is pointed at subwhite fme appears on the
face the camera judges to be the maect, and gray frames (max. 2)
will appear on other faces. e ster button is pressed halfway, up
to 9 green frames will appes tcamera focuses on.
• If a face is nt detected agray frames (no white frame) appear,
the setting wchange to [AiAF].
• Examples of faes thcannot be detected:
• Subjects that are far away or extremely close.
• Subjects that are dark or light.
• Faces turned to the side or at a diagonal, or faces with a portion hidden.
• The camera may mistakenly identify non-human subjects as a face.
• Not available when the screen is turned off (p. 45).
• If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
80
Changing the AF Frame
AiAF
The camera automatically selects among 9 AF frames to focus with.
If the camera cannot focus when you press the shutter button halfway, the
AF frame will not appear.
Center
The AF frame will be fixed to the center. This is effective for focusing on a
specific point.
You can reduce the AF frame size
Press the · button, select the 4 tab, then selehe [AF Frame Size] menu
item and the [Small] option.
• The setting is configured to [Normal] the dal zoom or digital tele-
converter is used.
If the camera cannot hen u press the shutter button halfway, the
AF frame will turn y
81
Checking the Focus and People's
Expressions (AF-Point Zoom)
You can zoom the display of the AF frame to check focus when shooting.
When you want to capture people’s expressions, set [AF Frame] (p. 80) to
[Face Detect]. When you want to check the focus while shooting in Macro
mode, set [AF Frame] to [Center].
Select [AF-Point Zoom].
● Press the · button and select the 4
tab.
● Press the op buttons to select [AF-Point
Zoom].
Accept the setng.
● Press the qr ons to select [On], then
pre· butt.
heck focus.
s thshutter button halfway to check
cus.
AF frame is set to [Face Detect], the
face that the camera determined as the
main subject is displayed enlarged. If the
AF frame is set to [Center], the center of
the image is displayed enlarged.
Shoot.
● Press the shutter button fully.
In the following cases the focus point will not display magnified:
• AF frame is set to [AiAF].
• When [Face Detect] is selected, but no face is detected, or when the
face is too large relative to the entire screen.
• When the subject is out of focus.
• When using the digital zoom.
• When the screen is turned off (p. 45).
• When the image is being displayed on a TV screen.
82
0 Selecting the Face to Focus On
(Face Select and Track)
You can select a chosen face to focus on and then shoot.
Face Frame
Set the Face Select mode.
● Point the camera towards the face and
press the 0 button.
X The Face Select mode will activate and a
white face frame ( ) will display around
the face the camera will focus on. Even if
the subject moves, the frame will follow
the subject within a certain range.
Select a facyou wish to focus on.
● Press the tton, and a face frame will
the fae you wish to focus on. If
the has med to all detected faces,
the ce Select mode will be canceled.
oldig down the 0 button will display
ce frames (up to 35) of all the detected
faces (green: the face the camera will
focus on, white: detected faces).
Shoot.
● Press the shutter button halfway. The face
frame of the focused face will change into
and appears in green.
●
Press the shutter button all the way to shoot.
In the following cases, the Face Select mode will be canceled.
• When turning the power off and back on or changing the shooting mode.
• When displaying the Menu screen.
• When using the digital zoom or digital tele-converter.
• When changing the recording pixels to
• When the screen is turned off (p. 45).
• When the camera cannot detect any face.
.
83
Checking the Focus Immediately after
Shooting (Focus Check)
You can check if your subject was in focus, right after shooting. You are
recommended to set [Review] in the 4 tab to [Hold] beforehand.
Select [Review Info].
● Press the · button and select the 4
tab.
● Press the op buttons to select [Review
Info].
Accept the setting.
● Press the qr buttons to select [Focus
Check], then pres the · button.
Recorded Image
Shoot.
X The d imagdisplays with the AF
ame ce frame (white frame around
acewhere the subject was focused.
botom right displays the content of
range frame.
Checking the focus.
● If multiple white frames display, press the
m or 0 button to switch the display on
Orange frame contents
the bottom right of the screen for checking
the focus of each frame.
● You can enlarge the display of the orange
frame content by moving the zoom lever
towards k.
● Pressing the shutter button halfway will
return you to the shooting screen.
You can erase an image while checking the focus (when the screen
described in Step 3 displays) by pressing the a button.
84
Changing the Metering Mode
You can change the brightness metering mode to match the shot you want to take.
Select the metering mode.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
Suitable for standard shooting conditions, including back lit
shots. Automatically adjusts the exposure so that the
subject is always properly lit for the shooting conditions.
Evaluative
Center Weighted
Avg.
Averages the light meterefrom the entire frame, but gives
greater weight to the n
Only meters the
appears at r of the reen.
Spot AE Point frame) that
Spot
% Shooting wF Lock
You can lock fosing. Oncus is locked, it remains locked even if
you let go of the hutter button.
Focus.
● Point the camera so that the subject of the
same shooting distance as the subject
you want to take a picture of, is in the AF
frame
Lock the focus.
● Keep the shutter button pressed halfway
and press the q button
X The focus is locked and
the screen.
.
displays on
Compose the scene and shoot.
● After shooting, press q to cancel AF lock.
85
& Shooting with AE Lock
You can lock the exposure setting and shoot. The focus and exposure can
be set separately.
Lock the Exposure.
● Point the camera at the subject on which
you wish to lock the exposure. While
pressing the shutter button halfway
press the o button
displays and the exposure is locked.
,
.
X
Compose the scene and shoot.
● After shooting, press the o button to
cancel AE lock.
86
( Shooting with FE Lock
Just like with AE lock (p. 85), you can lock the exposure for shooting with the
flash.
Select
(p. 59).
Lock the Flash Exposure.
● Point the camera at the subject on which
you wish to lock the exposure. While
pressing the shutter button halfway
,
press the o button
X The flash fires and
output is retaed.
.
displays. The flash
Compose hscene and shoot.
● ootingress the o button to
cE lock.
87
Slowing Down the Shutter Speed
(Long Shutter Mode)
You can set the shutter speed to a slow setting to make dark subjects
appear brighter. In order to avoid camera shake, attach the camera to a
tripod.
Select the Long Shutter mode.
● Press the m button, then use the op
buttons to select
. Press the ⁄ button.
Change the shter speed.
● Use tr butts to change the shutter
spepress e m button.
he hthe value, the slower the
ter eed and the brighter the
ded mage becomes.
When you attathe cmera to a tripod, you are recommended to set [IS
Mode] to [Off] to oo(p. 124)
88
Changing the Movie Mode
Select a shooting mode.
● Press the m button, then use the op
buttons to select
.
Select a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
This is the Standard mode. You can use the digital zoom
during shooting (p. 61).
Standard
Compact
Shooting with reduced recording pixels. You cannot use the
zoom during shooting.
Changing the Image Qualitin X
Select mage quality.
s thm button, then use the op
ns to select
.
Sct a menu item.
● Press the qr buttons to select a menu
item, then press the m button.
X The settings you made will be displayed
on the screen.
Modes and Image Quality Table
Mode Recording Pixels/Frame Rate
Content
640 x 480 pixels,
30 frames/sec.
For shooting standard quality movies.
640 x 480 pixels,
30 frames/sec. LP
The image quality will be lower than with
, but you can record twice the length.
Since the number of the recording pixels is
smaller, the image quality will be lower than with
, but you can record three times the length.
320 x 240 pixels,
30 frames/sec.
160 x 120 pixels,
15 frames/sec.
Suitable for attaching to e-mails, due to the
small file size.
90
Shooting Movies With Fixed Exposure Settings
Shooting Time
Estimated Shooting Time
Image
Mode
Quality
(Frame Rate)
32 MB (supplied)
2 GB
8 GB
15 sec.
30 sec.
43 sec.
16 min. 47 sec.
33 min. 2 sec.
46 min. 33 sec.
1 hr. 7 min. 6 sec.
2 hrs. 12 min. 3 sec.
3 hrs. 6 min. 4 sec.
3 hrs.
24 min. 54 sec.
13 hrs.
38 min. 45 sec.
3 min. 30 sec.
• The figures in this table depend on Canon measuring conditions.
is approx. 1 hour.
• Max. clip length for
Recording also stops when the file size reaches GB.
• Depending on the memory card, recording my sp even if the max. clip length
has not been reached. Use of SD SpClass higher memory cards is
recommended.
• Max. clip length for
is ax. 3 ms. The figures above indicate the
max. continuous recordin
Shooting Movies Fixed Exposure Settings
Before shooting, yu can ock (AE Lock) or change the exposure (Exposure
Shift).
Lock the exposure.
● Pressing the o button will lock the
exposure, and the exposure shift bar will
appear.
Adjust the exposure.
● Adjust the exposure with the qr buttons.
● After shooting, press the o button to
cancel.
Exposure Shift Bar
91
Other Shooting Functions
The following functions can be used in the same way as for still images.
•
Using the Self-Timer (p. 60)
• Zooming in on Far Away Subjects (p. 61)
In , you can use the digital zoom, but the optical zoom cannot be used.
If you want to shoot at the maximum magnification, you should adjust the optical
zoom to the maximal factor before shooting.
•
•
Shooting Close-ups (Macro) (p. 64)
Shooting Far Away Subjects (p. 65)
• Adjusting the Tone (White Balance) (p. 73)
• Changing the Tone of an Image (My Colors) (p. 75)
• Shooting Using a TV (p. 77)
•
Shooting with AF Lock (p. 85)
Playback Functions
The following functions can be used in me way s for still images.
• Erasing Images (p. 25)
• Quickly Finding Images (p.
•
•
Organizing Imges by CMy Category) (p. 96)
Viewing Slideows (p. 98)
• Viewing Images on TV (p100)
•
•
/ Erasing All Images (p. 101)
Protecting Images (p. 102)
Summary for Viewing Movies (p. 30)
Exit playback and return to single image playback.
Print (Refer to the Direct Print User Guide)
Playback
Slow Motion Playback (you can use the q button to slow down, or the r button
to speed up playback. Sound will not play back.)
Display the first frame
Previous frame (Rewind if you hold down the m button.)
Next frame (Fast forward if you hold down the m button.)
Display the last frame
92
Using Various Playback and
Other Functions
This chapter explains how to play back anedit images.
It also explains how to transfer images o a omputer and how to
make settings for printing.
• Press the 1 button to aybk mode, before operating the
camera.
Images edd on a omputer, changed file names, or taken with a
different camra my not display correctly.
93
Quickly Finding Images
g Displaying 9 Images (Index Playback)
Displaying 9 images at a time lets you quickly find the image you want.
Select Index Playback.
● Move the zoom lever toward g.
X Images will display in an index. The
selected image will have a green frame
and be enlarged.
Select an image.
● Press the opqr buttons to move the
green frame.
Displanly thselected image.
● Movom levtoward k.
e ime in the green frame will display
ngle mage Playback.
Searching 9 mages Time
Select Index Playback.
● Move the zoom lever toward g.
Display the Jump bar.
● Move the zoom lever toward g.
X The jump bar appears.
Change the displayed images.
Jump Bar
● Press the qr buttons to switch between
displays of 9 images.
● To return to Index Playback, move the
zoom lever toward k.
Holding the m button and pressing the qr buttons will jump to the first or
last set of images.
94
Quickly Finding Images
d Jumping to Images (Jump Display)
When you have many images on a memory card, you can jump to images
using a search key.
Select a search key.
● In Single Image Playback, press the o
button.
X The search key and the position of the
currently displayed image will appear at
the bottom of the screen.
● Press the op buttons to select the
desired searkey.
Jump to aage.
● e qr ttons.
X Tera will use the selected search
key jump to an image.
o retrn to Single Image Playback, press
e · button.
Position of the Currently
Displayed Image
Jump ShDate
People
Jumps to the first image of each shooting date.
Scenery
Jumps to the images of each category, sorted
with My Category (p. 96).
Events
–
Category 1–3
To Do
Jump to Folder
Jump to Movie
Jump 10 Images
Jumps to the first image of each folder.
Jumps to a movie.
Jumps over 10 images at a time.
Jump 100 Images Jumps over 100 images at a time.
• With search keys other than
and , the number of images
matching the search key will display on the right side of the screen.
• The desired search key may not display at the bottom of the screen, if
there are no images that match that search key.
95
; Organizing Images by Category
(My Category)
You can sort images into pre-set categories and organize by category.
People
Scenery
Events
Category 1–3
To Do
Select [My Category].
● Press the · button, select the 1 tab.
Press the op buttons to select [My
Category], then press the m button.
Catethe iages.
ess qr buttons to select an image.
s thop buttons to select a
ory, then press the m button.
sing the m button again cancels the
setting.
Auto Category during Shooting
Images are automatically sorted when shot, as shown in the following table.
For images shot in
detected when [AF Frame] (p. 80) is set to [Face Detect].
,
or
mode, or images with faces
People
Scenery
Events
For images shot in
For images shot in
,
,
,
,
or
mode.
or mode.
,
• If you do not wish to categorize the images automatically, select the 4
tab, choose [Auto Category] and set it to [Off].
96
k Magnifying Images
Magnify an image.
● In Single Image Playback, move the zoom
lever toward k and hold it there.
will display, and the image will be
magnified up to approx. 10 times.
● If you press the opqr buttons, you can
move the location of the displayed area.
● Move the zoom lever toward g to reduce
the magnification or return to Single
Image Playback.
● If you press the m button,
will
display. Presthe qr buttons to switch
between mas at the same level of
maficatioress the m button again
to noral.
ApproximateLocation
of Displayed Area
97
. Viewing Slideshows
You can automatically playback images recorded to a memory card. Each
image displays for approximately 3 seconds.
Select [Slide Show].
● Press the · button, select the 1 tab.
Press the op buttons to select [Slide
Show], then press the m button.
Select a transition effect.
● Press the qr butons to select a transition
effect, then preshe m button.
X A few seconds r “Loading image…”
dise slideow will start.
● You cuse/restrt a slideshow by
ssinthe m button again.
the · button to stop the
how.
Images displawithouransition effect.
The next image displays gradually.
The image slides out to the left and the next image appears.
• If you press the qr buttons during a slideshow, the image will change
(if you hold the buttons pressed, the images move faster).
• Power saving function does not work during slideshows (p. 42).
98
Checking the Focus and People's
Expressions (Focus Check Display)
You can check the focus or people's expressions of an image taken.
Display the Focus Check screen.
Recorded Image
● Press the ⁄ button several times until
the focus check screen appears.
X The recorded image displays with the AF
frame (frame with the subject in focus),
the face frame (white frame around a
face) or gray frames (around faces
detected during playback).
X The orange fme shows the range of the
image dplad at the bottom right of the
Orange frame contents
screen.
Chg the cus.
Mothe zoom lever toward k.
he cntent of the orange frame displays
agnified at the bottom right of the
screen.
● Use the zoom lever to change the display
size, and the opqr buttons to change
the display position, while checking the
focus.
● Press the · button to close the
magnified display.
When multiple frames display
When multiple frames display, press the m or 0 button to switch frames.
Each time you press either button changes the position of the orange frame.
99
Viewing Images on a TV
Using the supplied AV cable, you can connect the camera to a TV to view
images you have shot.
Items to Prepare
• Camera and TV
• AV cable supplied with the camera (p. 2)
Turn off the camera and TV.
Connect the camera to the TV.
● Open the camera’s cover and insert the
plug of the supplied AV cable into the
camera’s A/V OT terminal.
● Insert the othed plugs into TV’s video
inpuals as hown in the illustration.
Red or black
Yellow
rn oe TV and switch it to
Yellow
mde.
Bck
Turn on the camera.
● Press the 1 button to turn on the camera.
X The image will appear on the TV (nothing
will appear on the screen of the camera).
● After you finish viewing, turn off the
camera and TV, and unplug the AV cable.
What if no image displays on the TV?
If the camera’s video output system (NTSC/PAL) does not match the TV’s,
images will not display correctly. If this happens, press the · button, select the
3 tab, and then use the [Video System] menu item to switch to the correct video
system.
100
+ Changing Image Transitions
You can select from three transition effects when switching between images
in Single Image Playback.
Select [Transition].
● Press the · button, select the 1 tab,
and then select [Transition] and use the
qr buttons to select the desired
transition.
Immediately switches between images without transition effect.
Displayed image fades out as next image faes in.
Slides images left to switch between iges
/ Erasing All Imag
In addition to selecting animaes one at a time, you can erase all
images at once. inceras cannot be recovered, exercise
adequate cautiobefore eraages. However, protected images cannot
be erased.
Select [Erase all].
● Press the · button, select the 1 tab.
Press the op buttons to select [Erase
All], then press the m button.
Erase all images.
● Press the qr buttons to select [OK], then
press the m button.
X All images on the memory card will be
erased.
101
: Protecting Images
You can protect important images so that they will not be erased
inadvertently.
Select [Protect].
● Press the · button, select the 1 tab.
Press the op buttons to select [Protect],
then press the m button.
Protect the image.
● Press the qr buons to select an image,
then press the m button.
X Protected imadisplay
on the
scr
● Press m button again to cancel
ect, and the will disappear.
otecadditional images, repeat the
e procedure.
If you format thmemy card (p. 49), protected images will also be
erased.
• Protected images cannot be erased with the camera’s erase function. To
erase an image, cancel protection first.
• If you select [Erase all] (p. 101) after protecting necessary images, all
other images will be erased. This is a convenient way of erasing
unneeded images.
102
= Resizing Images
You can resave images that were recorded at high recording pixel settings
as a new lower pixel file.
Select [Resize].
● Press the · button, select the 1 tab.
Press the op buttons to select [Resize],
then press the m button.
Select an image.
● Press the qr buttons to select an image,
then press thm button.
Seln imagsize.
Prethe qr buttons to select a setting,
en ess the m button.
Save the new image.
● Press the qr buttons to select [OK], then
press the m button.
X The image will be saved as a new file.
Display the new image.
● When you press the · button, [Display
new image?] displays. Press the qr
buttons to select [Yes], then press the m
button.
X The saved image will display.
103
\ Rotating Images
• You cannot resize an image if there is not enough free space on the
memory card.
• Movies and images shot in
cannot be resized.
You cannot resize an image to a larger size.
\ Rotating Images
Images taken with the camera held vertically can be rotated when viewing
them horizontally.
Selecate].
Press · button, select the 1 tab.
ss top buttons to select [Rotate],
presthe m button.
Rotate the image.
● Press the qr buttons to select an image,
then press the m button.
X Cycle through the 90°/270°/original
orientations with each press of the m
button.
104
] Correcting Red-Eye Effect
You can automatically correct images with red-eye and save those images
as new files.
Select [Red-Eye Correction].
● Press the · button, select the 1 tab.
Press the op buttons to select [Red-Eye
Correction], then press the m button.
Select an image to correct.
● Press the qr buttons to select an image,
then press thm button.
X A frame wipear on red-eye detected
amera
rret the image.
ess the qr buttons to select [Start],
then press the m button.
Save the new image.
● Press the qr buttons to select [New File],
then press the m button.
X The image will be saved as a new file.
Display the new image.
● When you press the · button, [Display
new image?] displays. Press the qr
buttons to select [Yes], then press the m
button.
X The saved image will display.
105
] Correcting Red-Eye Effect
Manual Correction
When the camera cannot automatically detect and correct red-eye, correct it manually.
Add a correction frame.
● In Step 3 on the previous page, select
[Add Frame] and then press the m
button.
Set the position and size.
● Press the opqbuttons to move the
correction frme reen) to the red-eyes,
then uhe zolever to adjust its size
so ed-eyare framed.
The aside the frame will appear
rgein the bottom right of the screen.
you ress the
set (white) and a new frame will appear.
m
button, the first frame
●
When you have set the frame positions and
sizes, press the
Steps 3 and 4 on the previous page.
·
button, then follow
●
You can add up to 35 correction frames.
Removing Frames
• In Step 3 on the previous page, select [Remove Frame] and then press
the m button.
• Press the qr buttons to select a frame, then press the m button.
• Press the · button, then follow Steps 3 and 4 on the previous page.
• Some images may not be properly corrected.
• If there is not enough free space on the memory card, red-eye cannot be
corrected.
•
If you repeat corrections on the same image, image quality may deteriorate.
• When [Overwrite] in Step 4 on the previous page is selected, the
uncorrected image is overwritten with the corrected data, erasing the
original image.
• Protected images cannot be overwritten.
106
^ Attaching Sound Memos
You can record and attach a sound memo (WAVE format) to an image. The
attached sound memo can be up to approximately 1 minute long per image.
Select [Sound Memo].
● Press the · button, select the 1 tab.
Press the op buttons to select [Sound
Memo], then press the m button.
Select an image.
● Press the qr buttons to select an image,
then press thm button.
corthe memo.
ess the qr buttons to select
press the m button.
, then
X Recording starts.
● You can pause/restart recording by
pressing the m button.
● If you want to stop recording, press the
qr buttons to select
m button.
, then press the
Sound Memo Operation Panel
Exit
Record
Play
Pause
Delete
• The sound attached to an image can also be played with the supplied
software.
• Sound memos cannot be deleted from protected images.
107
Transferring Images to a Computer
“Transferring Images with the Camera” (p. 35) in Chapter 1 explained how to
transfer images using [New Images]. This section will explain other ways to
transfer images.
Prepare.
● Follow Steps 2–4 on page 33 to display
Direct Transfer menu.
Select a setting.
● Press the op buttons to select a setting.
Transfer the images.
In
and
● Press the c ton.
X
The returnto the Direct Transfer
menu transferrng is complete.
an
the c button, then use the qr
ns to select an image and press the
c button again.
X Images matching the selected setting will
be transferred.
● Press the · button to return to the Direct
Transfer menu.
Direct Transfer Settings
Transfers all images from the memory card to the computer.
All Images
Transfers all new images that have not been transferred to
the computer before (p. 35).
New Images
DPOF Trans. Images Transfers all images designated for transfer at once (p. 109).
Select & Transfer
Select and transfer images one at a time.
Select and transfer an image to use as your computer
desktop’s background (wallpaper). (JPEG only)
Wallpaper
To cancel while transferring, press the m button.
108
{ Designating Images for Transfer
(DPOF)
You can designate images you want to transfer with [DPOF Trans. Images]
(p. 108). These designation methods comply with the DPOF (Digital Print
Order Format) standards.
Designating Images Individually
Select [Transfer Order].
● Press the · button, select the 1 tab.
Press the op buttons to select [Transfer
Order], then press the m button.
Sele[Ord.
● Pe qr btons to select [Order],
theess the m button.
Select an image.
● Press the qr buttons to select an image,
then press the m button.
X After designating an image
● Press the m button again to cancel
designation, the will disappear.
displays.
● Repeat the above procedure to designate
other images. Up to 998 images can be
designated.
● Pressing the · button twice will save the
settings to the memory card and return
you to the menu screen.
109
{ Designating Images for Transfer (DPOF)
Designating All Images
Select [Transfer Order].
● Press the · button, select the 1 tab.
Press the op buttons to select [Transfer
Order], then press the m button.
Select [Mark all].
● Press the qr buttons to select [Mark all],
then press the m button.
● Press the qr buons to select [OK], then
press the m un.
X All iwill be esignated together.
Reset All
[Transfer Order].
● ss the · button, select the 1 tab.
Press the op buttons to select [Transfer
Order], then press the m button.
Select [Reset].
● Press the qr buttons to select [Reset],
then press the m button.
● Press the qr buttons to select [OK], then
press the m button.
X All transfer orders are removed.
may display when using a memory card with transfer settings set by a
different camera. If you change settings with this camera, the previously
made settings may be overwritten.
110
Designating Images for Printing (DPOF)
You can make print settings to images on a memory card (up to 998
images), such as which images to print and how many prints to make. These
designation methods comply with the DPOF (Digital Print Order Format)
standards.
Using the c Button to Add to Print List
Display the image you wish to print and simply press the c button to add
it to the Print List (DPOF).
Select an image.
● Press the qr buttons to select an image,
then press the c button.
Set the nmer of prints.
● Phe obuttons to set the number
o
dd Print List
ess he qr buttons to select [Add], then
ess the m button.
X The
display.
icon and the number of prints
● If you want to remove an image from the
Print List, display the image you wish to
remove. Press the c button, use the
qr buttons to select [Remove], then
press the m button.
111
Designating Images for Printing (DPOF)
Printing from the Print List (DPOF)
You can easily print the selected images, after setting the Print List (DPOF)
and connecting the camera with a printer. Also refer to the Direct Print User
Guide.
Turn off the camera and printer.
Connect the camera and printer.
● Open the cover and insert the smaller plug
of the cable into the camera's terminal, as
shown.
● Insert the bigger plug into the printer's
terminal. Refer the printer's user guide
about how to ect the printer.
Turn prinr.
on he camera.
Ping.
● Press the op buttons to select
[Print now], then press the m button.
X Printing starts.
● Press the qr buttons to check the images
in the Print List.
112
Designating Images for Printing (DPOF)
Selecting Images
Select [Select Images & Qty.].
● Press the · button, select the 2 tab.
Press the op buttons to select [Select
Images & Qty.], then press the m button.
Select an image.
● Press the qr buttons to select an image,
then press the m button.
X You will be ae to set the number of print
copies.
● If elect [Idex],
appears on the
s
t tnumber of prints.
ess the op buttons to set the number
prints (maximum 99).
● Repeat Steps 2 and 3 to set other images
and the number of prints.
● For [Index], you cannot set the number of
prints. Only select images.
Set All Images to Print One Each
Select [Select All Images].
● Press the · button, select the 2 tab.
Press the op buttons to select [Select
All Images], then press the m button.
113
Designating Images for Printing (DPOF)
Make the settings.
● Press the qr buttons to select [OK], then
press the m button.
X One copy of every image will be set to
print and you will return to the menu
screen.
Clearing all Selections
Select [Clear All Selections].
● Press the · button, select the 2 tab.
Press the op bttons to select [Clear All
Selections], then ress the m button.
● Press the qr ons to select [OK], then
prem butt.
X All ses will be cleared.
Print Settings
You can make settigs for the e, date and file number. These
settings apply to all elected images, and cannot be set individually.
Select [Print Settings].
● Press the · button, select the 2 tab.
Press the op buttons to select [Print
Settings], then press the m button.
Make the settings.
● Press the op buttons to select an item,
then use the qr buttons to select a
setting.
114
Designating Images for Printing (DPOF)
Standard
Index
Both
On
Prints one image per page.
Print Type
Prints several reduced size images per page.
Prints both standard and index formats.
Prints date from shooting information.
Date
Off
–
On
Prints file number.
File No.
Off
–
On
Clears all print settings after printing.
–
Clear DPOF
data
Off
• Depending on the printer or photo developer, print settings may not be
reflected.
•
may display when using a memory cawith transfer settings set by
a different camera. If you change setgs ith this camera, the
previously made settings may verwri.
• Images with the date embedg
(63), always print with the
date, regardless of tate] g. As a result, some printers may
print the date twicimes if [Date] is also set to [On].
• When sto [Index], [nd [File No.] cannot be set to [On] at the
same tim
• The date wprinn the style set in [Date/Time] in the 3 tab (p. 19).
115
116
Changing Functions
The functions listed in the
usage. You can set them in the Shooting or Playback mode, by pressing the
button.
3
tab are useful functions that you can set for normal
·
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
● Select [Start-up Image], then press the qr
buttons to select [Off].
Turning off the Power SaFuncion
You can set the power savin(p. 2) to [Off]. However, setting to
[On] is recommended to save owe
● Ch[Power Saving], then press the m
button.
Press the op buttons to select [Auto Power
Down], then use the qr buttons to select [Off].
● If you set [Auto Power Down] to [Off], be
careful not to forget to turn off the camera after
use.
118
Changing Functions
Power Saving during Shooting
You can change the time at which the screen shuts down automatically
during shooting (p. 118). This also works when [Auto Power Down] is set to
[Off].
In order to save battery power, it is recommended to choose less than
[1min.].
● Choose [Power Saving], then press the m
button.
● Press the op buttons to select [Display Off],
then use the qr buttons to select a time.
Changing the File NumAssinment
Images you shoot are autocally ned file numbers, in the order they
were taken, from 0001 – sad to folders of up to 2000 images.
You can change the file nignent.
● t [File Numbering], then press the qr
buttons to select a setting.
● [Continuous]: Even if you shoot using a new
memory card, the file numbers are assigned
consecutively until an image with the number
9999 is taken/saved.
[Auto Reset]: If you replace the memory card
with a new one, file numbers are assigned
starting with 0001 consecutively.
• For either setting [Continuous] or [Auto Reset], if you use a memory card
already containing images, the newly assigned file numbers may
continue the existing numbering. If you want to start over with file
number 0001, format the memory card before use (p. 49).
• Refer to the Software Starter Guide for information regarding folder
structure or image type.
119
Changing Functions
Creating a Folder
You can create new folders to save your images to.
●
Select [Create Folder], then press the
m
button.
● Press the op buttons to select [Create New
Folder], then press the qr buttons to select
.
X When in Shooting mode, the
displays.
Newly shot images are now saved to the new
folder.
Creating Folders by Day and Time
You can set a day and time for folder creation.
●
Select [CreFoldeen press the
m
button.
● Press thuttons select [Auto Create],
tpress qr buttons to select an
● op buttons to select [Time], then
pqr buttons to set a time.
X The new folder will be created on the set day
and time. Images shot after the creation date
are saved to the new folder.
Turning off Auto Rotate
When you play back images on the camera, images shot in vertical
orientation automatically rotate and display vertically. You can turn off this
function.
● Select [Auto Rotate], then press the qr
buttons to select [Off].
120
Changing Shooting Functions
Changing the Lens Retract Time
The lens retracts about 1 minute after switching to Playback mode, for safety
reasons. You can set the retract time to [0 sec.].
● Select [Lens Retract], then press the qr
buttons to select [0 sec.].
Changing Shooting Functons
You can set functions in the 4 taressinhe · button while in
Shooting mode. Some functions mae availae, depending on the
shooting mode. Refer to thong) Tab Menu section (p. 136).
Using the Slow So
Shoot with the fsh and a slow shutter speed. Lightens dark backgrounds
when shooting nit sceries or indoors using a flash. You can use Slow
Synchro to get the sresults as with
(p. 57).
● Select [Flash Settings], then press the m
button.
● Press the op buttons to select [Slow
Synchro], then press the qr buttons to select
[On].
In order to reduce camera shake, attach the camera to a tripod so that it
does not move. When you attach the camera to a tripod, you are
recommended to set [IS Mode] to [Off] to shoot (p. 124).
121
Changing Shooting Functions
Using the Auto Red-Eye Correction Function
This function automatically reduces red-eye. Only the corrected image will
be recorded to the memory card.
● Select [Flash Settings], then press the m
button.
● Press the op buttons to select [Red-Eye
Corr.], then press the qr buttons to select
[On].
• Red-eye correction may be applied to other reparts than red eyes. For
example, when red make-up has been used ound eyes.
• Depending on the image, red-eye may not etected automatically
and correction may not be appliu expeed. If this occurs, select
in the 1 tab the [Red-Eye Correapply rection (p. 105).
Turning off the Redamp
The lamp lights in oder to redued-eye effect that occurs when
shooting in dark conitions using the flash. You can turn off this function.
Select [Flash Settings], then press the
button.
m
● Press the op buttons to select [Red-Eye
Lamp], then press the qr buttons to select
[Off].
122
Changing Shooting Functions
Turning off the AF-Assist Beam
When the camera has focusing difficulties while you press the shutter button
halfway, the AF-assist Beam will automatically light to assist focusing. You
can turn off this function.
● Select [AF-assist Beam], then press the qr
buttons to select [Off].
Displaying the Overlay
You can display grid lines for verticahorizal guidance, or 3:2 guide
to confirm the printable area for L sostcarize prints.
ct [p. Overlay], then press the qr
s to elect a setting.
ines]: A grid overlays the display.
[Guide]: The areas outside the 3:2 range
are grayed out.
These areas will not print when printing on
paper of 3:2 aspect ratio.
• In
,
and
modes, you cannot set [3:2 Guide] and [Both].
• Grid lines will not be recorded on the image.
• The gray areas on the top and bottom of the screen will not be printed;
however, the entire image displayed will be recorded.
123
Changing Shooting Functions
Changing the Image Stabilization (IS Mode)
● Select [IS Mode], then press the qr buttons to
select a setting.
● [Continuous]: The image stabilization is
always on. You can confirm the result directly
on the screen which makes it easier to check
the composition or focus of the subject.
[Shoot Only]: The image stabilization is only
on in the moment of shooting.
[Panning]: The image stabilization only works
for the effect of up and down motion. This
option is recommendd for shooting objects
moving horizonty.
• If camera shake is too strong, fimera to tripod. When you
attach the camera to a t, you ecommended to set [IS Mode] to
[Off] to shoot.
• When using [Pning]e to old the camera horizontally. The
Image Stabzation doewhen the camera is held vertically.
Registering Functions to the c Button
● Select [Set c button], then press the m
button.
● Press the opqr buttons to select the
functions to register, then press the m button.
● When you press the c button, you can use
the registered function or display the setting
screen for the selected function.
• Select
if you want to cancel a function.
• When this
symbol is shown on the bottom right of an icon, the
function cannot be used in the current shooting mode.
• In
, each press of the c button records white balance data (p. 73),
and the white balance settings also change to
.
124
Using Household Power
If you use AC Adapter Kit ACK800 (sold separately), you can use the
camera without worrying about how much charge is left in the batteries.
Turn the camera off.
Plug the cord into the camera.
● Open the camera’s terminal cover and
insert the plug into the camera.
Connect the power cord.
● Connect the power cord to the compact
power adapter, ten plug the other end
into a power utl.
● You rn the mera on to use it.
● After ish, turoff the camera and
plug e power cord from the power
t.
Do not unpluhe power ch the camera turned on. This could
erase images ou have aken or damage the camera.
Using a Supplementary Flash
High-Power Flash HF-DC1 (sold separately) is used to supplement the
camera’s built-in flash when the subject is too far away for proper
illumination. For details on attaching and using the High-Power Flash, refer
to the user guide provided with the flash.
126
Handling Precautions
Equipment
• This camera is a high-precision electronic device. Do not drop it or
subject it to strong impact.
• Never place the camera close to magnets or motors that generate strong
electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions or corrupt image data.
• If water droplets have fallen or dirt is stuck on the camera or LCD monitor,
wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.
• Never use cleaners including organic solvents to wipe the camera or LCD
monitor.
• Use a commercially available blower brush to remove dust from the lens.
For stubborn dirt contact the closest Canon ustomer Support Help Desk
as listed on the customer support leaflet supied with your camera.
• When you move the camera rapidly from co hot temperatures,
condensation may form on the ior extnal surfaces of the
camera. To avoid condensation, camern an airtight, resealable
plastic bag and let it adtemature changes slowly before
removing it from the ba
• When condenatihastop using the camera immediately.
Continued usmay damcamera. Remove the batteries and
memory cardnd wait until the moisture has completely evaporated
before resuminuse.
Memory Cards
• Memory cards are high-precision electronic devices. Do not bend, apply
force or subject to strong impact. Doing so may corrupt image data
recorded on the memory card.
• Do not spill liquids on the memory card. Do not touch the memory card's
terminals with your hands or metallic objects.
• Do not store memory cards near a TV, speakers or other devices that
generate magnetism or static electricity. Doing so may corrupt image
data recorded on the memory card.
• Do not store memory cards in hot, humid or dusty locations.
127
You Think There is a Problem
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the power button, but nothing happened.
•
•
•
•
Confirm that the batteries are properly inserted (p. 14).
Confirm that the memory card slot/battery cover is securely closed (p. 15).
Confirm that the batteries are charged (p. 16).
Clean the terminals with a cotton swab and re-insert the batteries several times.
Batteries are consumed quickly.
•
•
Confirm that you are using the correct battery type (p. 16).
In low temperatures, battery performance may be weakWarm the batteries, such as
by placing them in your pocket.
•
If the battery terminals have become dirty, y perfance may be weak. Clean
the terminals with a cotton swab and re-batterieseveral times.
Lens will not retract.
•
Do not open the memory card y cor while the power is on. After closing
the cover, turn the power on th(p. 1).
TV output
Image is distorted or nswing on TV.
•
Set the video setting, NTSC or PAL, for your TV (p. 100).
Shooting
Screen does not display.
•
Press the ⁄ button to turn on the screen (p. 45).
Screen does not display properly while shooting.
•
The display automatically brightens when shooting in dark conditions. Noise may
appear and the movement of the subject on the screen may appear somewhat
jagged. This has no effect on the recorded image (p. 45).
The following situations will not record on still images but will record on movies.
•
•
•
When the camera is subjected to powerful light sources, the display may darken.
Under fluorescent lighting, the screen may flicker.
When shooting bright light sources, a bar of light (purplish red) may appear on the
screen.
128
You Think There is a Problem
Display turned off while shooting.
•
When the flash has finished charging, the display will return (p. 23).
appears when the shutter button was pressed halfway.
•
•
•
•
Set the IS Mode to [Continuous] (p. 124).
Set the flash to any setting other than
Increase the ISO speed (p. 72).
(p. 59).
Attach the camera to a tripod so that the camera does not move.
Image is blurred.
•
Press the shutter button halfway to focus on the subject, then press fully to shoot
(p. 21).
•
•
•
•
•
Shoot the subject within the focusing distance (p. 140).
Refer to "
appears when the shutter button was pressed halfway" above.
Set the AF-assist Beam to [On] (p. 123).
Confirm that functions which you do not intenu(macro, etc.) are not set.
Shoot using the focus lock or AF lock (.
Even when you press the shutter balfwayhe frame does not
appear, and the camera dot fo
•
If you center on the light atrang area of the subject and press the
shutter button ha, or ress he shutter button halfway, the frame will
appear and the amera will
Subject is too dk or too bright (overexposed).
•
•
•
•
Set the flash to
(p. 5
Adjust the brightness with exposure compensation (p. 74).
Use the AE lock, or spot metering to shoot (pp. 85, 86).
The subject is too bright due to ambient lighting.
Image is dark even though the flash fired.
•
•
Shoot within an appropriate distance for flash photography (p. 140).
Increase the ISO speed (p. 72).
Subject in an image taken using the flash is too bright (overexposed).
•
•
Shoot within an appropriate distance for flash photography (p. 140).
Set the flash to (p. 59).
White dots appear on the image when shooting with the flash.
Light from the flash has reflected off dust particles or other objects in the air.
Image appears rough or grainy.
•
•
•
Shoot with the ISO speed on a lower setting (p. 72).
Depending on the shooting mode the ISO speed may be high and the image may
appear rough or grainy (pp. 55, 58).
129
You Think There is a Problem
Eyes appear red.
•
Set [Red-Eye Lamp] to [On]. This is effective if the subject looks right at the red-eye
reduction lamp. Even better results can be obtained by increasing the lighting in
indoor settings or approaching closer to the subject. The shutter will not close for
approx. 1 second when the lamp lights (p. 23).
•
You can set the [Red-Eye Corr.] to [On] to automatically correct red-eye while
shooting. You can also make corrections after the image is taken, using [Red-Eye
Correction] (pp. 105, 122).
Image seen in the viewfinder and the recorded image are slightly different.
•
You can check the actual image size on the screen (p. 45). If you use Macro mode,
the difference is even stronger. Use the screen to compose the image.
Recording images to the memory card takes a long time, or continuous
shooting slows down.
•
Low-level formatting the memory card in the camera msolve the problem (p. 50).
Cannot set shooting functions or Func. menu sgs
•
Depending on the shooting mode, availons varRefer to the Functions
Available in Each Shooting Mode section
Shooting movies
Recording time donot displctly or shooting stops unexpectedly.
•
Format the memory ard in thcamera, or use a memory card capable of recording
at high speeds. Even he rerding time is not displayed correctly, the movie will be
recorded correctly on the mory card (pp. 29, 49).
< ! > displayed on the screen, and shooting ended automatically.
•
•
•
•
Camera's internal memory was insufficient. Try one of the following measures.
Low-level format the memory card in the camera (p. 50).
Lower the number of recording pixels (p. 90).
Use a memory card capable of recording at high speeds.
Zoom does not operate.
•
Zoom before shooting movies. In
(p. 90).
mode, you can also use the digital zoom
130
You Think There is a Problem
Playback
Cannot play back.
•
If the file name or folder structure is changed on a computer, you may not be able to
play back images or movies. Refer to the Software Starter Guide for information
regarding folder structure or file names.
Playback stops, or audio cuts out.
•
•
Use a card that has been formatted on this camera (p. 49).
If you copy a movie to a memory card that reads slowly, playback may interrupt
momentarily.
•
When playing movies on your computer, depending on the computer's capabilities, it
may drop frames, or the audio may cut out.
Cannot operate buttons or zoom lever.
•
When the mode dial is set to Easy mode, some buns and the zoom cannot be
used (p. 54).
List of Messages
Messages appear on the
•
Refer to the Errosag. 13.
131
Error Messages
If error messages appear on the screen, try one of the following solutions.
No memory card
•
The memory card may be inserted in the wrong orientation. Insert the memory card
in the correct orientation (p. 14).
Card locked!
•
The SD memory card or SDHC memory card's write protect tab is set to "Lock".
Unlock the write protect tab (pp. 14, 17).
Cannot record!
•
You attempted to shoot an image without a memory card installed or with a memory
card installed in the wrong orientation (p. 14).
•
You cannot attach sound memos to movies.
Memory card error
•
The memory card is malfunctioning. Formatting the meory card may solve the
card, contact your Canon Customer Supporelp Dethere may be a problem
with the camera.
Memory card full
•
There is not enough free spacemocard. Erase the images (pp. 25, 101)
to open space for new imagesn emy memory card (p. 14).
Change the batteri
Battery charge is loChange the batteries (p. 16).
No Image.
•
•
There are no images recorded on the memory that can be displayed.
Protected!
•
Protected images, movies or sound memos cannot be erased. Remove protection
before erasing (p. 102).
Unidentified Image/Incompatible JPEG/Image too large./RAW
•
•
Unsupported images or data, or corrupted image data cannot be displayed.
Images manipulated on a computer, that have had their file name changed, or have
been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image
•
•
•
Unsupported images cannot be magnified (p. 97), rotated (p. 104) or edited (pp. 103,
105).
Images manipulated on a computer, that have had their file name changed, or have
been taken with a different camera may not be magnified, rotated or edited.
Movies cannot be magnified (p. 97) or edited (pp. 103, 105)
132
Error Messages
Incompatible WAVE
•
Since the data type of the existing sound memo is incorrect., no new sound memo
can be added or played back (p. 107).
Naming error!
•
The file name could not be created because there is an image with the same name
as the folder that the camera is attempting to create, or the highest possible file
[Auto Reset] (p. 119) or format the memory card (p. 49).
Cannot transfer!
•
Unsupported or corrupted image data cannot be transferred, even when set in Direct
Transfer (pp. 34, 108).
•
Movies selected in [Wallpaper] cannot be transferred (p. 108).
Too many marks
•
The number of images for print settings or traer ttings exceeds 998. Set 998 or
less images for print or transfer (pp. 10911).
Cannot complete!
•
Print settings or transfer settould saved correctly. Reduce the number of
settings and try again (pp.
Unselectable imag
•
•
Unsupported imges cannot printing (p. 111).
Images manipued on a computer, that have had their file name changed, or have
been taken with ifferecamera may not be supported.
Communication error
•
Images could not be transferred to the computer due to the large amount of images
(approx. 1000) stored on the memory card. Use a commercially available USB card
reader to transfer the images.
Lens error, restart camera
•
A lens error was detected. Press the power button to turn the camera off and back on
(p. 22). If this error message continues to display, contact your Canon Customer
Support Help Desk as there may be a problem with the lens.
•
This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
Exx (xx: number)
•
Camera detected an error. Press the power button to turn the power off and then
back on (p. 22). If an error code displays directly after taking a picture, the shot may
not have been recorded. Check image in playback mode.
•
If this error code reappears, note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
133
Functions Available in Each Shooting Mode
Shooting modes
Function
Long Shutter
*1
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
—
{
—
—
{
{
{
{
{
{
{
{
{
—
{
—
—
{
{
{
{
{
{
—
—
{
—
{
{
—
{
{
{
{
—
—
{
—
—
—
{
{
{
—
{
—
—
{
—
{
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
ISO Speed (p. 72)
Flash (p. 59)
Drive Mode (pp. 60, 69, 78)
Self-
Timer
Shooting Zone (pp. 64, 65)
All R
Face Select (p. 83)
AE/FE Lock (still images) (pp. 86
AE Lock, Exposure Shift ovies
AF Lock (p. 85)
play Off
No Information
Information View
LCD Monitor Setting (p5)
Function menu
Exposure Compensation (p. 74)
Long Shutter (p. 88)
{
—
{
{
{
{
{
{
{
{
{
—
—
—
—
{
{
{
{
{
—
—
{
{
{
—
—
—
—
—
{
—
—
{
—
—
{
{
{
—
—
—
—
—
{
—
—
{
—
—
—*2
—*3
—
—
—
1
*
White Balance (p. 73)
My Colors (p. 75)
Metering System (p. 85)
Compression Ratio (still images) (p. 70)
Number of Recording Pixels
(still images) (p. 70)
Number of Recording Pixels, Frame
Rate, Compression (Movie) (p. 90)
—
*1 Optimum value is automatically set by the camera. *2 Fixed to
(Fine).
*3 Fixed to
(Large). *4 Fixed to
.
134
Functions Available in Each Shooting Mode
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
—
—
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
—
—
—
{
—
—
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
—
—
—
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
—
—
{
{
{
{
{
{
—
—
—
—
—
—
—
{
{
{
{
—
—
—
—
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
—
—
—
{
—
—
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
—
—
—
—
—
—
{
—
{
—
{
{
{
—
—
—
{
{
—
{
{
{
—
—
—
—
—
—
{
—
{
—
{
{
{
—
—
—
{
{
—
{
{
Function menu
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
{
—
{
—
—
{
—
—
{
{
{
—
—
—
—
—
{
—
—
{
—
—
{
—*4
—
—
—
—
—
—
{
{
{
{
—
—
—
—
—
{
{
—
—
—
{
{
{
{
—
—
—
—
—
—
—
{
{ Setting available. — Setting not available.
135
Menus
(Shooting) Tab Menu
Shooting modes
Function
Long Shutter
Face Detect
AiAF
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{*2
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
AF Frame (p. 80)
Center
Normal
Small
—
{
AF Frame Size (p. 81)
AF-Point Zoom (p. 82)
Digital Zoom*1 (p. 61)
—
—
{*2
Standard
Digital Tele-converter 1.4x/2.3x
Slow Synchro
—
—
Flash Settings
(pp. 121, 122)
Red-Eye Corr.
—
Red-Eye Lamp
{*2
—
{*2
{*3
{
Self-Timer (Custom Timer) (p. 78
AF-assist Beam (p. 123)
Review (Rec. review) . 52)
Off
Review Info (p. 45)
etaileFocus Check
—
Auto Category (p. 96)
{*2
{
Off
Disp. Overlay (p. 123
IS Mode (p. 124)
)
Grid Lines
3:2 Guide/Both
Off
—
—
—
Continuous
Shoot Only/Panning
{
—
c Registering settings to the Print/Share button
(p. 124)
{
{
{
—
*1 Can not be set when
*2 Always set to On.
*3 Fixed to [2 sec.].
or
is selected.
*4 Only when the flash is set to
.
136
Menus
{
{
{
{
—
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
—
{
{
{
—
—
—
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
—
{
{
{
{*4
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
—
{
—
—
—
—
—
—
—
—
{
—
—
—
{
{
{
—
{
{
—
{
—
{
—
—
{
—
—
—
—
—
{
—
—
—
{
{
{
—
{
{
—
{*2 {*2
{*2 {*2
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{ Setting available. — Setting not available.
137
Menus
(Setting) Tab Menu
Item
Options/Summary
Ref. Page
p. 51
Mute
On/Off*
Volume
Off/1/2*/3/4/5
On*/Off
p. 51
Start-up Image
Power Saving
p. 118
Auto Power Down: On*/Off
Display Off: 10, 20 or 30 sec./1*, 2 or 3 min.
pp. 42, 118
Date/Time
Date (y/m/d) and time (h/m) settings
Formatting memory card, erasing all data
Continuous*/Auto Reset
Create New Folder/Auto Create
On*/Off
p. 18
p. 49
Format
File Numbering
Create Folder
Auto Rotate
Lens Retract
Language
p. 119
p. 120
p. 120
p. 121
p. 20
1 min. */0 sec.
Select displayed lanage
NTSC/PAL
Video System
Print Method
Reset All
p. 100
–
Auto*/
Returnto dault settings
p. 48
*Default setting
About Print Method setting
Select
when you print image recorded in the
(Widescreen) mode at
the full page setting for wide paper using a Canon SELPHY CP750/740/730/
CP720/CP710/CP510 Compact Photo Printer. Since this setting is saved even
when the power is turned off, ensure that you return the setting to [Auto] to print
other image sizes.
138
Menus
(Playback) Tab Menu
Item
Slide Show
Options/Summary
Ref. Page
p. 98
Automatically plays back images.
Organizes images in categories.
Corrects red-eye in images.
Resizes and saves images.
Records and attaches sound to images.
Protects images.
My Category
Red-Eye Correction
Resize
p. 96
p. 105
p. 103
p. 107
p. 102
p. 104
p. 101
p. 109
Sound Memo
Protect
Rotate
Rotates images.
Erase all
Erases all unprotected images.
Sets images to transfer to a computer.
Transfer Order
Resume
Sets the image that displaywhen resuming
playback.
–
Transition
p. 101
(Print) Tab Menu
Item
Print
Optns/Summary
Prinset for printing.
Sets ifor printing.
Ref. Page
p. 26
Select Images & y.
Select All Images
Clear All Selections
Print Settings
p. 113
p. 113
p. 114
p. 114
Ss all images for printing.
ancels all settings for printing.
Sets the printing style.
139
Specifications
Camera Effective Pixels . . . . Approx. 10.0 million
Image Sensor . . . . . . . . . . . . 1/2.3.-inch type CCD (Total Pixels: Approx. 10.3
million)
Lens. . . . . . . . . . . . . . . . . . . . 6.2 (W) – 24.8 (T) mm (35mm film equivalent: 35 (W) –
140 (T) mm) f/2.7 (W) – f/5.6 (T)
Digital Zoom . . . . . . . . . . . . . Approx. 4.0x (Up to approx. 16x in combination with the
optical zoom)
Optical Viewfinder . . . . . . . . . Real-image zoom viewfinder
LCD Monitor . . . . . . . . . . . . . 2.5-inch type TFT color LCD, approx. 115,000 dots
(Picture coverage 100%)
AF Frame Mode
Focusing Range . . . . . . . . . . Normal: 50 cm (1.6 ft.) – infinity
(from end of lens) Macro: 3 – 50 cm (W) (1.2 in. – 1.6 ft. (W))
30 – 50 cm (T) (1.0 – 1.6 ft. (T))
Infinity: 3 m (10 ft.) – infinity
Face Detect, AiAF (9 points), Center
Easy: 3 cm (1.2 in.) – infy (W),
30 cm (1.0 ft.infty (T)
Kids&Pets: 1 m 3.3 ft.) nity
Shutter. . . . . . . . . . . . . . . . . . Mechanicaand eleonic shutter
Shutter Speeds . . . . . . . . . . . 1/60 – 1/160
100 sTotal shutter speed range. Available
rs by hooting mode.)
Image Stabilization . . . . . . Le
Metering System . . . . . . . . . Eventer-weighted average, Spot
Exposure Compensatn . . . . ±2 st1/3-stop increments
ISO speed . . . . . . . . . . . . . uto, High ISO Auto, ISO 80/100/200/400/800/1600
(Standard Output Sensitiy,
Recommended Exposure
Index)
White Balance . . . . . . . . . . . . Auto, Day Light, Cloudy, Tungsten, Fluorescent,
Fluorescent H, Custom
Built-in Flash . . . . . . . . . . . . . Auto, On, Off
Built-in Flash Range . . . . . . . 30 cm – 4.0 m (1.0 – 13 ft.) (W), 30 cm – 2.0 m (1.0 –
6.6 ft.) (T)
Shooting Modes. . . . . . . . . . . P, Auto, Easy, Portrait, Landscape, Night Snapshot,
Kids&Pets, Indoor, Scene Mode*, Movie**
*
Night Scene, Sunset, Foliage, Snow, Beach,
Fireworks, Aquarium, ISO 3200
** Standard and Compact
Continuous Shooting . . . . . . . Approx. 1.3 shots/sec. (In Large/Fine mode)
Self-timer . . . . . . . . . . . . . . . . Activates shutter after an approx. 10-sec./approx. 2-
sec. delay, Custom
Recording Media . . . . . . . . . . SD memory card, SDHC memory card,
MultiMediaCard, MMCplus card, HC MMCplus card
File Format . . . . . . . . . . . . . . Design rule for camera file system and DPOF
compliant
140
Specifications
Data Type . . . . . . . . . . . . . . . . Still images: Exif 2.2 (JPEG)
Movies: AVI (Image data: Motion JPEG; Audio data:
WAVE (monaural))
Sound memos: WAVE (monaural)
Compression. . . . . . . . . . . . . . Superfine, Fine, Normal
Number of Recording Pixels . . Still images
Large: 3648 x 2736 pixels
Medium 1: 2816 x 2112 pixels
Medium 2: 2272 x 1704 pixels
Medium 3: 1600 x 1200 pixels
Small: 640 x 480 pixels
Date Stamp: 1600 x 1200 pixels
Widescreen: 3648 x 2048 pixels
Movies:
Standard: 640 x 480 pixels (30 frames/
sec.), 640 x 480 pixels (30 frames/sec.
LP), 30 x 240 pixels (30 frames/sec.)
Compct: 160 x 120 pixels (15 frames/
s)
Sound (Movie, Sound Memo) . Bit rate:
Sampli11 kHz
Playback Modes . . . . . . . . . . . Single/IngnificatioEasy/Slide Show/My
ory/-Eye Correction/Resize/Sound Memo/
Rota/Focus Check/Jump/Movie Playback
Direct Print . . . . . . . . . . e compliant, and Canon Direct Print and
et Direct compatible
Interface . . . . . . . . . . . . . . . Hieed USB (mini-B), Audio/Video output (NTSC or
PAL selectable, monaural audio)
Communication Settin. . . MTP, PTP
Power Supplies . . . . . . . . . . . . 2 AA-size alkaline batteries
2 AA-size NiMH batteries NB4-300 (sold separately)
AC Adapter Kit ACK800 (sold separately)
Operating Temperatures. . . . . 0 – 40°C (32 – 104°F)
Operating Humidity . . . . . . . . . 10 – 90%
Dimensions . . . . . . . . . . . . . . . 95.4 x 62.4 x 31.0 mm (3.76 x 2.46 x 1.22 in.)
(excluding protrusions)
Weight (camera body only) . . . Approx. 155 g (5.47 oz.)
141
Index
Numerics
3:2 Guide ............................. 123
D
Date/Time .............................. 18
Adding to Image.................. 63
Changing............................ 19
Default Settings ...................... 48
Deleting Î Erasing
Digital Tele-Converter ............. 62
ct PriUser Guide ............. 2
y Lanage................... 20
lay Overlay .................... 123
DOF........................... 109, 111
A
AC adapter kit ...................... 126
Accessories............................ 36
AE Lock ................................. 86
AF Î Auto Focus
AF Frame......................... 22, 80
AF Lock ................................. 85
AF-Point Zoom ....................... 82
AiAF....................................... 81
Aquarium (Scene Mode) ......... 58
Audio ..................................... 51
Auto Focus Î Focus
AV Cable..........................
B
Batteries
E
Easy Mode ....................... 24, 54
Editing
Alkaline Batteries.........2, 14
Battery and Charger Kit....... 38
Charge Indicator ................. 16
NiMH Battery (sold separately) .
16
Power Saving ............. 42, 118
Rechargeable Batteries (Date/
Time Battery)...................... 19
Beach (Scene Mode) .............. 57
Black and White Images.......... 75
Red-Eye Correction .......... 105
Resizing (Making Images Small-
er).................................... 103
Rotating............................ 104
Enlarged Display .................... 82
Equipment
Default Settings .................. 48
Holding the Camera ............ 13
Erasing All Images................ 101
Erasing Images ...................... 25
Error Messages .................... 132
Exposure
C
Camera Shake ............... 59, 124
Components Guide................. 40
Compression Î Image Quality
AE Lock.............................. 86
Correction........................... 74
FE Lock.............................. 87
Continuous Shooting............... 69
142
Editing Î Editing
F
Erasing Images................... 25
Indicator........................... 41, 42
Indoor (Scene Mode) .............. 56
Infinity .................................... 65
Face Detect............................. 80
Face Select............................. 83
Factory Settings Î Default Settings
FE Lock .................................. 87
File No .................................. 119
Fireworks (Scene Mode).......... 58
Flash
Flash Off ............................. 59
Flash On ............................. 59
Supplementary Flash ......... 126
Focus...................................... 22
AF Frame............................ 80
Focus Check ........................... 84
Focus Lock.............................. 76
Foliage (Scene Mode).............. 5
Format Î Memory Cards - Format,
Equipment - Default Setti
Formatting (Memory Card
FUNC. Menu
K
Kids&Pets (Scene Mode) ........ 55
L
mp .......................... 40, 122
andscape (Scene Mode) ....... 55
LCD monitor Î Screen
ong Shutter Mode ................. 88
Basic List ....................... 34
Basic Operatios .............. 46
M
Macro .................................... 64
Magnifying Images.................. 97
Memory Cards
G
Grid Lines ............................. 123
Available Shots............. 17, 71
Format ............................... 49
Menu Functions (Basic Operations)
47
Menus.................................. 136
Metering Mode ....................... 85
MMCplus/HC MMCplus Memory
Card, MultiMedia card Î Memory
Cards
Mode Dial............................... 40
Movies ................................... 28
Image Quality (Frame Rate) 91
Mode.................................. 90
Recording Pixels................. 90
H
High Speed (ISO) .............. 58, 72
High-Power Flash.................. 126
Histogram ............................... 44
Household Power .................. 126
I
Image Quality (Compression Ratio)
70
Images
Display Time ....................... 52
143
Index
Shooting Time .............. 29, 91
S
Viewing (Playback) ............. 30
MultiMedia card Î Memory Cards
My Category........................... 96
My Colors............................... 75
Screen
Menu Operations .......... 46, 47
Switching the Display .......... 45
SD/SDHC memory cards Î Memo-
ry Cards
N
Night Scene (Scene Mode) ..... 57
Night Snapshot (Scene Mode). 55
Number of Shots..................... 17
Self-Timer
Changing Delay and Number of
Shoot ................................ 60
Shootinte and Time Î Date/
ing Usia TV............... 77
utter Button ........................ 21
Sle Show ............................. 98
Snow (Scene Mode) ............... 57
Software
Digital Camera Solution Disk . 2
Software Starter Guide.......... 2
Transferring Images to a Compu-
ter ...................................... 31
Sound .................................... 51
Sound Memos ...................... 107
Strap.................................. 2, 13
Sunset (Scene Mode) ............. 57
Supplementary Flash ............ 126
P
PictBridge ........................ 26, 27
Playback Button ..................... 41
Playback Î Viewing
Portrait (Scene Mode)............. 55
Postcard Size .......................
Power Button......................
Power Î Batteries
Power Saving.............. 42,
Print List............................ 111
Print Settings (DPOF) ......114
Print/Share Button .......... 26, 124
Printer...................... 26, 27, 112
Printing .................................. 26
Program AE ........................... 68
Protect ................................. 102
R
Recording Pixels (Image Size). 70
Red-Eye
T
Terminal........... 26, 33, 100, 126
Tone (White Balance) ............. 73
Transferring Images to a Computer
31, 34, 108, 109
Transition Effects.................... 98
Troubleshooting (You Think There
Auto Correction................. 122
Red-Eye Correction .......... 105
Reduction......................... 122
Resizing (Making Images Smaller)
103
Rotating Images ................... 104
144
Index
Is a Problem)......................... 128
V
Video Î Movies
Viewfinder......................... 41, 77
Viewing (Playback) .................. 93
AF-Point Zoom .................... 82
Enlarged Display ................. 97
Index Playback .................... 94
Single Image Playback......... 24
Slide Show.......................... 98
Viewing Images on a TV .... 100
W
White Balance......................... 73
Widescreen............................. 7
Z
Zoom ....................... 2
145
Trademark Acknowledgments
• The SDHC logo is a trademark.
Disclaimer
• Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohibited.
• Canon reserves the right to change the contents of this guide at any time
without prior notice.
• Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
• Every effort has been made to ensure that the information contained in
this guide is accurate and complete. However, if you notice any errors or
omissions, please contact the Canon customer service center indicated
on the customer support list included with the pduct.
• The above items notwithstanding, Canon acpno liability for damages
due to mistaken operation of the prod.
For CA, USA only
Included lithium battery conPerchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
146
FCC Notice
(Digital Camera, Model PC1309 systems)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class B
digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment doecause harmful interference to
radio or television reception, which can be determined y turning the equipment off and
on, the user is encouraged to try to correct the intrce by one or more of the
following measures:
•
•
•
Reorient or relocate the receig ante
Increase the separation be eqment and receiver.
Connect the equipment inon a ircuit different from that to which the
receiver is concted.
•
Consult the deer or an experadio/TV technician for help.
The cable with the fite coprovided with the digital camera must be used with this
equipment in order to coply with Class B limits in Subpart B of Part 15 of the FCC
rules.
Do not make any changes or modifications to the equipment unless otherwise specified
in the manual. If such changes or modifications should be made, you could be required
to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
Réglementation canadienne sur les interférences radio
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
147
|
Vector Power City Dk080706 User Manual
Schumacher Automatic Cr1 User Manual
Sanyo N 1700scc User Manual
Panasonic Kxf1100 User Manual
MIELE G 841 PLUS User Manual
Lexmark 13b0500 User Manual
LEVOIT LV H131S RXW User Manual
CRAFTSMAN 137.415030 User Manual
ASUS X450L User Manual
ACER EXTENSA 7220 User Manual