Dell SE2222H/SE2222HV
User’s Guide
Monitor Model: SE2222H/SE2222HV
Regulatory Model: SE2222Ht/SE2222Hf/SE2222HVf
Contents
Safety instructions............................................5
About your monitor ...........................................6
Package contents ..................................................... 6
Product features....................................................... 8
Identifying features and controls................................ 9
Monitor specifications...............................................12
Pin assignments .......................................................17
Plug and play capability.............................................19
LCD monitor quality and pixel policy ...........................19
Ergonomics ............................................................. 20
Handling and moving your display.............................. 22
Maintenance guidelines ............................................ 23
Setting up the monitor .....................................24
Connecting the stand............................................... 24
Connecting your monitor.......................................... 28
Organizing cables .................................................... 29
Removing the monitor stand..................................... 29
Wall Mounting (Optional) ......................................... 32
Contents
│
3
Operating your monitor ....................................33
Turning on the monitor............................................. 33
Using the front panel controls................................... 33
Using the OSD lock function ..................................... 35
Using the On-Screen Display (OSD) menu.................. 39
Setting up display resolution on your monitor..............61
Using tilt................................................................. 63
Troubleshooting ...............................................64
Self-test ................................................................. 64
Built-in diagnostics.................................................. 66
Common problems................................................... 67
Product-specific problems........................................ 69
Appendix.........................................................70
FCC Notices (U.S. Only) and Other Regulatory
Information ............................................................. 70
Contact Dell ............................................................ 70
EU product database for energy label and product
information sheet .................................................... 70
4
│
Contents
Safety instructions
Use the following safety guidelines to protect your monitor from potential damage
and to ensure your personal safety. Unless otherwise noted, each procedure
included in this document assumes that you have read the safety information that
shipped with your monitor.
Before using the monitor, read the safety information that is
shipped with your monitor and also printed on the product. Keep the
documentation at a secure location for future reference.
CAUTION: Use of controls, adjustments, or procedures other than
those specified in this documentation may result in exposure to shock,
electrical hazards, and/or mechanical hazards.
• Place the monitor on a solid surface and handle it carefully. The screen is fragile and
can be damaged if dropped or hit sharply.
• Always be sure that your monitor is electrically rated to operate with the AC power
available in your location.
• Keep the monitor in room temperature. Excessive cold or hot conditions can have an
adverse effect on the liquid crystal of the display.
• Connect the power cable from the monitor to a wall outlet that is near and accessible.
• Do not place and use the monitor on a wet surface or near water.
• Do not subject the monitor to severe vibration or high impact conditions. For example,
do not place the monitor inside a car trunk.
• Unplug the monitor when it is going to be left unused for an extended period of time.
• To avoid electric shock, do not attempt to remove any cover or touch the inside of the
monitor.
│
About your monitor
Package contents
Your monitor ships with the components indicated in the table. If any component is
NOTE: Some items may be optional and may not ship with your monitor.
Some features may not be available in certain countries.
NOTE: To set up with any other stand, see the documentation that
shipped with the stand.
Display
Stand riser
Stand base
VESA Cover
Power cable (varies by country)
│
VGA cable (SE2222HV only)
HDMI cable (SE2222H only)
• Quick Start Guide
• Safety and Regulatory Information
│
Product features
The Dell SE2222H/SE2222HV monitor has an active matrix, Thin-Film Transistor
(TFT), Liquid Crystal Display (LCD), anti-static, and LED backlight.
The monitor features include:
• 54.48 cm (21.45 in.) diagonal viewable area display (measured diagonally). 1920 x 1080
resolution, with full-screen support for lower resolutions.
• Wide viewing angles of 178 degrees in vertical and horizontal directions.
• SE2222H: HDMI connectivity makes it simple and easy to connect with legacy and
new systems.
• Plug and play capable if supported by your computer.
• On-Screen Display (OSD) adjustments for ease of setup and screen optimization.
• ≤ 0.3 W in Standby Mode.
• Optimize eye comfort with a flicker-free screen.
• The monitor adopts flicker-free TÜV-certified, which clears the eye visible flicker,
brings comfort viewing experience and preventing users suffer from eye strain and
fatigue.
• Security-lock slot.
• Arsenic-free glass and mercury-free panel.
• BFR/PVC-Reduced (the circuit boards inside your monitor are made using BFR/PVC-
free laminates).
• RoHS Compliant.
WARNING: The possible long-term effects of blue light emission from
the monitor may cause damage to the eyes, including eye fatigue, digital
eye strain, and so on. ComfortView feature is designed to reduce the
amount of blue light emitted from the monitor to optimize eye comfort.
│
Identifying features and controls
Front view
2
1
Label
1
Description
Function buttons
Use
To access the on-screen display (OSD)
menu and change the settings if required.
For more information, see Using the
Power On/Off button
(with LED indicator)
To turn the monitor On or Off.
2
Solid white light indicates that the
monitor is turned on and functioning
normally. Blinking white light indicates
that the monitor is in Standby Mode.
│
Back view
With monitor stand
Without monitor stand
Label
Description
Use
Security-lock slot
To secure the monitor using a security
lock (purchased separately).
1
Regulatory label, barcode, serial
number, and Service Tag label
List of regulatory approvals. See this
label if you need to contact Dell for
technical support. The Service Tag is
a unique alphanumeric identifier that
enables Dell service technicians to
identify the hardware components in
your computer and access warranty
information.
2
Stand release button
Regulatory information
Cable-management slot
Release stand from monitor.
List of regulatory approvals.
To organize the cables.
3
4
5
Side view
│
Bottom view, without monitor stand
SE2222H
Label
1
Description
Use
Power port
To connect the monitor power cable.
For connecting the monitor to your computer using
HDMI cable.
HDMI port
VGA port
2
3
For connecting the monitor to your computer using
VGA cable.
SE2222HV
Label
1
Description
Use
Power port
To connect the monitor power cable.
For connecting the monitor to your computer using
VGA cable.
VGA port
2
│
Monitor specifications
Description
Screen type
Panel type
Values
Active matrix-TFT LCD
Vertical Alignment (VA)
Viewable area
Diagonal
544.83 mm (21.45in.)
Active area:
Horizontal
Vertical
478.66 mm ( 18.84 in.)
260.28 mm ( 10.25 in.)
1245.86 cm2 (193.11 in.2)
Area
Pixel pitch
0.249x0.241mm
103
Pixel per inch (PPI)
Viewing angle:
Horizontal
Vertical
178° (typical)
178° (typical)
250 cd/m2 (typical)
Brightness
Contrast ratio
3,000 to 1 (typical)
Faceplate coating
Backlight
Anti-glare with 3H hardness
LED edgelight system
Response time (Gray to Gray) Normal mode
Fast mode
12 ms
8 ms
Color depth
Color gamut
16.7 million colors
CIE 1931 (72%)
Yes
Dell display manager
compatibility
Connectivity
SE2222H: one VGA port and one HDMI 1.4 (HDCP 1.4)
port.
SE2222HV: one VGA port.
Bezel width (edge of monitor - Top: 12.8 mm (0.50 in.)
to active area)
- Left/Right: 12.8 mm (0.50 in.)
- Bottom: 16.92mm (0.67 in.)
Security
Tilt angle
Security-lock slot for cable lock (optional purchase)
-5° to 21°
│
Resolution specifications
Description
Values
Horizontal scan range
Vertical scan range
30 kHz to 83 kHz (automatic)
48Hz to 75Hz (automatic)
Maximum preset resolution 1920 x 1080 at 60 Hz
Preset display modes
Display mode
Horizontal
frequency
Vertical
frequency
Pixel clock Sync polarity
(MHz)
(Horizontal/
Vertical)
-/+
(kHz)
(Hz)
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x1024
1280 x1024
1600 x 900
1920 x1080
31.5
70.1
28.3
25.2
31.5
31.5
37.5
37.9
46.9
48.4
60.0
67.5
64.0
80.0
60.0
67.5
60.0
75.0
60.3
75.0
60.0
75.0
75.0
60.0
75.0
60.0
60.0
-/-
-/-
40.0
49.5
65.0
78.8
+/+
+/+
-/-
+/+
+/+
+/+
+/+
+/+
+/+
108.0
108.0
135.0
108.0
148.5
│
Electrical specifications
Description
SE2222H
SE2222HV
Video input signals
• Analog RGB: 0.7 V 5 %,
75 Ω input impedance
• Analog RGB: 0.7 V 5 %,
75 Ω input impedance
• HDMI 1.4 (HDCP 1.4), 600
mV for each differential line,
100 Ω input impedance per
differential pair
Synchronization
input signals
Separate horizontal and vertical synchronizations,
polarity-free TTL level, SOG (Composite SYNC on green)
AC input voltage/
frequency/current
Inrush current
100 VAC to 240 VAC/50 Hz or 60 Hz 3 Hz/1.5 A (maximum)
30 A (120 V AC Input)
60 A (240 V AC Input)
Power Consumption 0.3 W (Off Mode)1
0.3 W (Standby Mode)1
14.1 W (On Mode)1
0.3 W (Off Mode)1
0.3 W (Standby Mode)1
14.1 W (On Mode)1
20 W (Max)2
22 W (Max)2
14.2 W (Pon)3
14.2 W (Pon)3
45.25 kWh (TEC)3
45.25 kWh (TEC)3
1
As defined in EU 2019/2021 and EU 2019/2013.
2 Max brightness and contrast setting.
3 Pon : Power consumption of On Mode measured with reference to Energy Star test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components, and
peripherals you ordered, and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
│
Physical characteristics
Description
Values
Signal cable type:
Analog
Digital
D-Sub (VGA), 15 pins;
HDMI, 19 pins
Dimensions (with stand):
Height
384.08mm (15.12 in.)
504.26mm (19.85 in.)
178.81mm (7.04 in.)
Width
Depth
Dimensions (without stand):
Height
295.38mm (11.63 in.)
504.26mm (19.85 in.)
49.21mm (1.94 in.)
Width
Depth
Stand dimensions:
Height
173.93mm (6.85 in.)
240.42mm (9.47 in.)
178.81mm (7.04 in.)
Width
Depth
Weight:
With packaging
4.40 kg (9.70 lb)
2.89 kg (6.37 lb)
With stand assembly and cables
Without stand assembly and cables 2.34 kg (5.15 lb)
(For wall mount or VESA mount
considerations - no cables)
Weight of stand assembly
0.33 kg (0.73 lb)
│
Environmental characteristics
SE2222H
SE2222HV
Description
Temperature:
Operating
0°C to 40°C (32°F to 104°F)
Non-operating:
Storage
• -20°C to 60°C (-4°F to 140°F)
Shipping
• -20°C to 60°C (-4°F to 140°F)
Humidity:
Operating
10% to 80% (non-condensing)
Non-operating:
Storage
• 5% to 90% (non-condensing)
Shipping
• 5% to 90% (non-condensing)
Altitude:
Operating (maximum)
5,000 m (16,400 ft)
Non-operating (maximum) 12,192 m (40,000 ft)
Thermal dissipation 75.06 BTU/hour (maximum) 68.2 BTU/hour (maximum)
48.1 BTU/hour (typical) 48.1 BTU/hour (typical)
│
Pin assignments
D-Sub 15-pin connector
Pin Number Signal Assignment
1
2
Video-Red
Video-Green
Video-Blue
GND
3
4
5
Self-test
GND-R
6
7
GND-G
8
GND-B
9
DDC +5 V
GND-sync
GND
10
11
12
13
14
15
DDC data
H-sync
V-sync
DDC clock
│
Pin assignments
HDMI 19-pin connector
Pin Number Signal Assignment
1
TMDS DATA 2+
2
TMDS DATA 2 SHIELD
TMDS DATA 2-
3
4
TMDS DATA 1+
5
TMDS DATA 1 SHIELD
TMDS DATA 1-
6
7
TMDS DATA 0+
8
TMDS DATA 0 SHIELD
TMDS DATA 0-
9
10
11
12
13
14
15
16
17
18
19
TMDS CLOCK+
TMDS CLOCK SHIELD
TMDS CLOCK-
CEC
Reserved (N.C. on device)
DDC CLOCK (SCL)
DDC DATA (SDA)
DDC/CEC Ground
+5 V POWER
HOT PLUG DETECT
│
Plug and play capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically
provides the computer with its Extended Display Identification Data (EDID) using Display Data
Channel (DDC) protocols so the computer can configure itself and optimize the monitor settings.
Most monitor installations are automatic, you can select different settings as required. For more
LCD monitor quality and pixel policy
During the LCD Monitor manufacturing process, it is normal for one or more pixels to become
fixed in an unchanging state, which are hard to see and do not affect the display quality or
usability. For more information about Dell Monitor Quality and Pixel Policy, see Dell Support site
│
Ergonomics
CAUTION: Improper or prolonged usage of keyboard may result in injury.
CAUTION: Viewing the monitor screen for extended periods of time may
result in eye strain.
For comfort and efficiency, observe the following guidelines when setting up and using your
computer workstation:
• Position your computer so that the monitor and keyboard are directly in front of you as
you work. Special shelves are commercially available to help you correctly position your
keyboard.
• To reduce the risk of eye strain and neck/arm/back/shoulder pain from using the monitor
for long periods of time, we suggest you to:
1. Set the distance of the screen between 20 to 28 in. (50 - 70 cm) from your eyes.
2. Blink frequently to moisten your eyes or wet your eyes with water after prolonged usage
of the monitor.
3. Take regular and frequent breaks for 20 minutes every two hours.
4. Look away from your monitor and gaze at a distant object at 20 feet away for at least 20
seconds during the breaks.
5. Perform stretches to relieve tension in the neck, arm, back, and shoulders during the
breaks.
• Make sure that the monitor screen is at eye level or slightly lower when you are sitting in
front of the monitor.
• Adjust the tilt of the monitor, its contrast, and brightness settings.
• Adjust the ambient lighting around you (such as overhead lights, desk lamps, and the
curtains or blinds on nearby windows) to minimize reflections and glare on the monitor
screen.
• Use a chair that provides good lower-back support.
• Keep your forearms horizontal with your wrists in a neutral, comfortable position while
using the keyboard or mouse.
• Always leave space to rest your hands while using the keyboard or mouse.
• Let your upper arms rest naturally on both sides.
• Ensure that your feet are resting flat on the floor.
│
• When sitting, make sure that the weight of your legs is on your feet and not on the front
portion of your seat. Adjust your chair’s height or use a footrest if necessary to maintain a
proper posture.
• Vary your work activities. Try to organize your work so that you do not have to sit and work
for extended periods of time. Try to stand or get up and walk around at regular intervals.
• Keep the area under your desk clear of obstructions and cables or power cords that may
interfere with comfortable seating or present a potential trip hazard
monitor screen at or
below eye level
monitor and
keyboard
positioned
directly in front
of the user
wrists relaxed
and flat
feet flat on the
floor
│
Handling and moving your display
To ensure the monitor is handled safely when lifting or moving it, follow the guidelines mentioned
below:
• Before moving or lifting the monitor, turn off your computer and the monitor.
• Disconnect all cables from the monitor.
• Place the monitor in the original box with the original packing materials.
• Hold the bottom edge and the side of the monitor firmly without applying excessive pressure
when lifting or moving the monitor.
• When lifting or moving the monitor, ensure the screen is facing away from you and do not
press on the display area to avoid any scratches or damage.
• When transporting the monitor, avoid any sudden shock or vibration to it.
• When lifting or moving the monitor, do not turn the monitor upside down while holding the
stand base or stand riser. This may result in accidental damage to the monitor or cause
personal injury.
│
Maintenance guidelines
Cleaning your monitor
WARNING: Before cleaning the monitor, unplug the monitor power cable
from the electrical outlet.
monitor.
For best practices, follow these instructions while unpacking, cleaning, or handling your
monitor:
• To clean your screen, lightly dampen a soft and clean cloth with water. If possible, use a
special screen-cleaning tissue or solution suitable for the anti-static coating. Do not use
benzene, thinner, ammonia, abrasive cleaners, or compressed air.
• Use a lightly-dampened cloth to clean the monitor. Avoid using detergent of any kind as
some detergents leave a milky film on the monitor.
• If you notice white powder when you unpack your monitor, wipe it off with a cloth.
• Handle your monitor with care as the black-colored monitor may get scratched.
• To help maintain the best image quality on your monitor, use a dynamically changing screen
saver and turn off your monitor when not in use.
│
Setting up the monitor
Connecting the stand
NOTE: The stand is not attached when the monitor is shipped from the
factory.
To attach the monitor stand:
1. Connect the stand riser to the stand base, slide the stand riser onto the stand base until it
clicks into place.
2. Open the monitor protective cover.
│
3. Align the stand-riser bracket with the grooves at the back of the monitor.
4. Slide the stand assembly until it snaps into place.
│
5. Install the VESA cover.
6. Hold the stand riser and lift the monitor carefully, then place it on a flat surface.
│
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
NOTE: Do not connect all cables to the computer at the same time. It is
recommended to route the cables through the cable-management slot
before you connect them to the monitor.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect VGA or HDMI cable from your monitor to the computer.
Connecting VGA cable
VGA
VGA
Connecting HDMI cable
HDMI
HDMI
│
Organizing cables
Use the cable-management slot to route the cables connected to your monitor.
Removing the monitor stand
NOTE: To prevent scratches on the screen when removing the stand, ensure
that the monitor is placed on a soft and clean surface.
To remove the stand:
1. Place the monitor on a soft cloth or cushion along the desk.
│
2. Tilt the stand downwards to access to the release button.
3. Using a long screwdriver to press the release button.
4. While keeping the release button pressed, pull the stand out.
│
5. Press down on the quick release tab latch on the bottom of the base to separate base
from stand riser.
To remove the VESA cover:
Press the dimple on the VESA cover to release it from the back of the display.
│
Wall Mounting (Optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1. Place the monitor panel on a soft cloth or cushion on a stable flat table.
3. Use a Phillips crosshead screwdriver to remove the four screws securing the plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the monitor.
5. Mount the monitor on the wall. For more information, see the documentation that shipped
with the wall mounting kit.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket with
minimum weight or load bearing capacity of 9.12 kg.
│
The following table describes the control buttons:
Control buttons
Description
Use this button to choose from a list of preset modes.
1
Preset mode
For direct access to the Brightness and Contrast menu.
2
3
Brightness/Contrast
Menu
To launch the On-Screen Display (OSD) menu, or to
access the list of items/options of a menu item. For
To exit or return to the OSD main menu.
4
5
Exit
To turn the monitor On or Off.
Solid white light indicates that the monitor is turned on
and functioning normally. Blinking white light indicates
that the monitor is in Standby Mode.
Power button
(with power-status light)
│
Using the OSD lock function
You can lock the front-panel control buttons to prevent access to the OSD menu and/ or
power button.
Use the Lock menu to lock the button(s).
1. Select one of the following options.
Dell 22 Monitor
Brightness / Contrast
Language
Transparency
Timer
Auto Adjust
Input Source
Color
Lock
Menu Buttons
Power Button
Menu + Power Buttons
Disable
Display
Reset Menu
Menu
Personalize
Others
2. The following message appears.
Dell 22 Monitor
Are you sure you want to lock the Menu Buttons?
To unlock the Buttons, refer to the User’s Guide.
Yes
No
SE2222H/SE2222HV
3. Select Yes to lock the buttons. Once locked, pressing any control button will display the
lock icon
.
│
Use the front-panel control button to lock the button(s).
2 3
4
5
1
1. Press and hold Button 4 for four seconds, a menu appears on the screen.
Dell 22 Monitor
Select option:
2. Select one of the following options:
Options
Description
Select this option to lock OSD menu function.
1
2
3
Menu Buttons lock
Power Button lock
Use this option to lock power button.
Use this option to lock OSD menu and power button.
Menu and Power Buttons
lock
Use this option to run the built-in diagnostics, see Built-
4
Built-in Diagnostics
│
To unlock the button(s).
Press and hold Button 4 for four seconds until a menu appears on the screen. The following
table describes the options to unlock the front-panel control buttons.
Dell 22 Monitor
Dell 22 Monitor
Dell 22 Monitor
Select option:
Select option:
Select option:
Options
Description
Use this option to unlock OSD menu function.
1
2
3
Menu Buttons unlock
Power Button unlock
Use this option to unlock power button.
Use this option to unlock OSD menu and power button.
Menu and Power Buttons
unlock
Use this option to run the built-in diagnostics, see Built-
4
Built-in Diagnostics
│
OSD controls
Use the buttons on the bottom edge of the monitor to adjust the image settings.
Control buttons
Description
Use the Up button to increase values or move up in a
menu.
1
2
3
4
Up
Use the Down button to decrease values or move down
in a menu.
Down
Use the OK button to confirm your selection in a menu.
Use the Back button to go back to the previous menu.
OK
Back
│
Using the On-Screen Display (OSD) menu
Accessing the OSD menu
NOTE: Any changes you make are automatically saved when you move
to another menu, exit the OSD menu, or wait for the OSD menu to close
automatically.
1. Press the
button to display the OSD main menu.
Main menu for SE2222H
Dell 22 Monitor
Brightness / Contrast
Auto Adjust
Input Source
Color
75%
75%
Display
Menu
Personalize
Others
Main menu for SE2222HV
Dell 22 Monitor
Brightness / Contrast
Auto Adjust
Color
75%
75%
Display
Menu
Personalize
Others
│
2. Press the
and
buttons to move between the setting options. As you move from one
icon to another, the option name is highlighted.
3. Press the button once to activate the highlighted option.
4. Press and
button to select the desired parameter.
5. Press
and then use the
and
buttons, according to the indicators on the menu, to
make your changes.
6. Select the button to return to the main menu.
│
Icon Menu and
submenus
Description
Use this option to activate brightness/contrast adjustment.
Brightness/
Contrast
SE2222H
Dell 22 Monitor
Brightness / Contrast
Auto Adjust
Input Source
Color
75%
75%
Display
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Auto Adjust
Color
75%
75%
Display
Menu
Personalize
Others
Brightness adjusts the luminance of the backlight.
Press the button to increase the brightness and press the
button to decrease the brightness (min. 0; max. 100).
Brightness
Contrast
Adjust the brightness first, and then adjust the contrast only if
further adjustment is necessary.
Press the button to increase the contrast and press the
button to decrease the contrast (min. 0; max. 100).
The contrast function adjusts the degree of difference between
darkness and lightness on the screen.
│
Icon Menu and
submenus
Description
Use this option to activate automatic setup and adjust menu.
SE2222H
Auto Adjust
Dell 22 Monitor
Brightness / Contrast
Press
to adjust the screen automatically.
Auto Adjust
Input Source
Color
Display
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Auto Adjust
Color
Press
to adjust the screen automatically.
Display
Menu
Personalize
Others
The following dialog appears on a black screen as the monitor self-
adjusts to the current input:
Auto Adjustment in Progress...
Auto Adjust allows the monitor to self-adjust to the incoming
video signal. After using Auto Adjustment, you can further tune
your monitor by using the Pixel Clock (Coarse) and Phase (Fine)
controls under Display.
NOTE: Auto Adjust does not occur if you press the button
while there are no active video input signals or attached
cables.
This option is available only when you are using the VGA
input.
│
Icon Menu and
submenus
Description
Use the Input Source menu to switch between the different video
signals that may be connected to your monitor (SE2222H only).
Input Source
Dell 22 Monitor
Brightness / Contrast
VGA
Auto Adjust
Input Source
Color
HDMI
Auto Select
Reset Input Source
On
Display
Menu
Personalize
Others
VGA
Push
Push
to select the VGA input source when using VGA connector.
to select the HDMI input source when using HDMI
HDMI
connector.
Select Auto Select to scan for available input signals.
Auto Select
Select this option to restore default input source.
Reset Input
Source
Use color to adjust the color setting mode.
Color
SE2222H
Dell 22 Monitor
Brightness / Contrast
Preset Modes
Standard
RGB
Auto Adjust
Input Source
Color
Input Color Format
Reset Color
Display
Menu
Personalize
Others
│
Icon Menu and
submenus
Description
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Preset Modes
Standard
RGB
Auto Adjust
Color
Input Color Format
Reset Color
Display
Menu
Personalize
Others
When you select Preset Modes, you can choose Standard,
ComfortView, Movie, Game, Warm, Cool, or Custom Color from
the list.
Preset Modes
• Standard: Load the monitor's default color settings. This is the
default preset mode.
• ComfortView: Decrease the level of blue light emitted from the
screen to make viewing more comfortable for your eyes.
NOTE: To reduce the risk of eye strain and neck/arm/back/
shoulders pain from using the monitor for long periods of time,
we suggest that you :
- Set the screen about 20~28 in. (50~70 cm) from your eyes.
- Blink frequently to moisten or lubricate your eyes.
- Take regular 20-minute breaks every two hours.
- Look away from your monitor and gaze at a distant object
at 20 feet away for at least 20 seconds during the breaks.
- Perform stretches to relieve tension in the neck/arm/back/
shoulders during the breaks.
• Movie: Load color settings ideal for movies.
• Game: Load color settings ideal for most gaming applications.
• Warm: Increase the color temperature. The screen appears
warmer with a red/yellow tint.
• Cool: Decrease the color temperature. The screen appears
cooler with a blue tint.
• Custom Color: Allow you to manually adjust the color settings.
Press the
and
buttons to adjust the three colors (R, G, B)
values and create your own preset color mode.
│
Icon Menu and
submenus
Description
SE2222H
Dell 22 Monitor
Brightness / Contrast
Preset Modes
Reset Color
Standard
Auto Adjust
Input Source
Color
ComfortView
Movie
Game
Display
Warm
Menu
Cool
Personalize
Others
Custom Color
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Preset Modes
Standard
Auto Adjust
Color
Input Color Format
Reset Color
ComfortView
Movie
Display
Game
Menu
Warm
Personalize
Others
Cool
Custom Color
│
Icon Menu and
submenus
Input Color
Format
Description
Allow you to set the video input mode to:
• RGB: Select this option if your monitor is connected to a
computer or a media player that supports RGB output.
• YCbCr/YPbPr*: Select this option if your media player
supports only YCbCr/YPbPr output.
SE2222H
Dell 22 Monitor
Brightness / Contrast
Preset Modes
Auto Adjust
Input Source
Color
Input Color Format
Reset Color
RGB
YCbCr
Display
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Preset Modes
Auto Adjust
Color
Input Color Format
Reset Color
RGB
YPbPr
Display
Menu
Personalize
Others
*When VGA input is selected.
This feature can shift the color of the video image to green or
purple. This is used to adjust the desired skin tone color.
Hue
Use
or
to adjust the hue from 0 to 100.
Press
Press
to increase the green shade of the video image.
to decrease the purple shade of the video image.
NOTE: Hue adjustment is available only when you select
Movie or Game preset mode.
│
Icon Menu and
submenus
Description
This feature can adjust the color saturation of the video image.
Saturation
Use
or
to adjust the saturation from 0 to 100.
Press
Press
to increase the colorful appearance of the video image.
to decrease the colorful appearance of the video image.
NOTE: Saturation adjustment is available only when you
select Movie or Game preset mode.
Reset your monitor color settings to the factory settings.
Reset Color
Display
Use the display to adjust image.
SE2222H
Dell 22 Monitor
Brightness / Contrast
Aspect Ratio
16:9
Auto Adjust
Input Source
Color
Horizontal Position
Vertical Position
Sharpness
50
Display
Pixel Clock
Menu
Phase
Personalize
Others
Response Time
Reset Display
Normal
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Aspect Ratio
16:9
Auto Adjust
Color
Horizontal Position
Vertical Position
Sharpness
50
50
Display
50
Menu
Pixel Clock
50
Personalize
Others
Phase
50
Response Time
Reset Display
Normal
│
Icon Menu and
submenus
Description
Adjust the image ratio to 16:9 or 4:3.
Use or to move image left and right.
Minimum is '0' (-). Maximum is '100' (+).
Aspect Ratio
Horizontal
Position
(VGA input only)
Vertical
Use the
or
to move image up and down.
Position
Minimum is '0' (-). Maximum is '100' (+).
(VGA input only)
This feature can make the image look sharper or softer.
Sharpness
Use
or
to adjust the sharpness from 0 to 100.
The Pixel Clock feature enables you to adjust image quality on your
monitor according to your preference.
Pixel Clock
(VGA input only)
Use
or
buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment,
use the Pixel Clock (coarse) adjustment and then use Phase (fine),
again.
Phase
(VGA input only)
Allow you to select between Normal (12 ms) or Fast (8 ms).
Response
Time
Select this option to restore default display settings.
Reset Display
│
Icon Menu and
submenus
Menu
Description
Select this option to adjust the settings of the OSD, such as the
languages of the OSD, the amount of time, the menu remains on
screen, and so on.
SE2222H
Dell 22 Monitor
Brightness / Contrast
Language
Transparency
Timer
English
20
Auto Adjust
Input Source
Color
20 s
Lock
Disable
Display
Reset Menu
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Language
Transparency
Timer
English
20
Auto Adjust
Color
20 s
Display
Lock
Disable
Reset Menu
Menu
Personalize
Others
Language options set the OSD display to one of the eight languages:
English, Spanish, French, German, Brazilian Portuguese, Russian,
Simplified Chinese, or Japanese.
Language
Select this option to change the menu transparency by pressing
Transparency
Timer
the
or
buttons from 0 to 100.
OSD hold time: sets the length of time, the OSD will remain active
after the last time you pressed a button.
Use
or
to adjust the slider in 1 second increments, from 5
to 60 seconds.
│
Icon Menu and
submenus
Lock
Description
With the control buttons on the monitor locked, you can prevent
people from accessing the controls. It also prevents accidental
activation in multiple monitors side-by-side setup.
SE2222H
Dell 22 Monitor
Brightness / Contrast
Language
Transparency
Timer
Auto Adjust
Input Source
Color
Lock
Menu Buttons
Power Button
Menu + Power Buttons
Disable
Display
Reset Menu
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Language
Transparency
Timer
Auto Adjust
Color
Display
Lock
Menu Buttons
Power Button
Menu + Power Buttons
Disable
Reset Menu
Menu
Personalize
Others
• Menu Buttons: All Menu/function buttons (except the Power
button) are locked and not accessible by the user.
• Power Button: Only the Power button is locked and not
accessible by the user.
• Menu + Power Buttons: Both the Menu/function & Power
buttons are locked and not accessible by the user.
The default setting is Disable.
NOTE: To unlock the button(s), press and hold
of the monitor for 4 seconds.
key
Reset all OSD settings to the factory preset values.
Reset Menu
│
Icon Menu and
submenus
Description
Allow you to choose a feature from Shortcut Key 1, Shortcut Key 2,
Power Button LED, or Reset Personalization, Preset Modes or
Brightness/Contrast, and set it as a shortcut key.
Personalize
SE2222H
Dell 22 Monitor
Brightness / Contrast
Shortcut Key 1
Preset Modes
Auto Adjust
Input Source
Color
Shortcut Key 2
Brightness/Contrast
On in On Mode
Power Button LED
Reset Personalization
Display
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Shortcut Key 1
Preset Modes
Auto Adjust
Color
Shortcut Key 2
Brightness/Contrast
On in On Mode
Power Button LED
Reset Personalization
Display
Menu
Personalize
Others
Allow you to select one of the following: Preset Modes,
Brightness/Contrast, Auto Adjust, Input Source (SE2222H only),
Aspect Ratio, to set the shortcut key 1.
ShortcutKey1
ShortcutKey2
Allow you to select one of the following: Preset Modes,
Brightness/Contrast, Auto Adjust, Input Source (SE2222H only),
Aspect Ratio, to set the shortcut key 2.
Allow you to set the power LED indicator On or Off in On Mode to
save energy.
Power Button
LED
Allow you to restore shortcut key to the default setting.
Reset
Personalization
│
Icon Menu and
submenus
Others
Description
SE2222H
Dell 22 Monitor
Brightness / Contrast
Display Info
Auto Adjust
Input Source
Color
DDC/CI
On
LCD Conditioning
Service Tag
Reset Others
Factory Reset
ABCDEFG
Display
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Display Info
Auto Adjust
Color
DDC/CI
On
LCD Conditioning
Service Tag
Reset Others
Factory Reset
Display
ABCDEFG
Menu
Personalize
Others
│
Icon Menu and
submenus
Description
Press to display the information about the display.
Display Info
SE2222H
Dell 22 Monitor
Brightness / Contrast
Display Info
Model: Dell SE2222H
Auto Adjust
Input Source
Color
DDC/CI
Input Source: HDMI
LCD Conditioning
Service Tag
Reset Others
Factory Reset
Current: 1920x1080, 60Hz
Display
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Display Info
Model: Dell SE2222HV
Auto Adjust
Color
DDC/CI
Input Source: VGA
LCD Conditioning
Service Tag
Reset Others
Factory Reset
Current: 1920x1080, 60Hz
Display
Menu
Personalize
Others
│
Icon Menu and
submenus
DDC/CI
Description
DDC/CI (Display Data Channel/Command Interface) allows you to
adjust the monitor settings using software on your computer.
Select Off to turn off this feature.
Enable this feature for best user experience and optimum
performance of your monitor.
SE2222H
Dell 22 Monitor
Brightness / Contrast
Display Info
DDC/CI
On
Auto Adjust
Input Source
Color
LCD Conditioning
Service Tag
Reset Others
Factory Reset
Display
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Display Info
DDC/CI
On
Auto Adjust
Color
LCD Conditioning
Service Tag
Reset Others
Factory Reset
Display
Menu
Personalize
Others
│
Icon Menu and
submenus
LCD
Description
Help reduce minor cases of image retention. Depending on the
degree of image retention, the program may take some time to run.
To start LCD Conditioning, select On.
Conditioning
SE2222H
Dell 22 Monitor
Brightness / Contrast
Display Info
DDC/CI
Auto Adjust
Input Source
Color
LCD Conditioning
Service Tag
Reset Others
Factory Reset
On
Display
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Display Info
DDC/CI
Auto Adjust
Color
LCD Conditioning
Service Tag
Reset Others
Factory Reset
On
Display
Menu
Personalize
Others
│
Icon Menu and
submenus
Description
Display the Service Tag number of the monitor.
Service Tag
SE2222H
Dell 22 Monitor
Brightness / Contrast
Display Info
Auto Adjust
Input Source
Color
DDC/CI
On
LCD Conditioning
Service Tag
Reset Others
Factory Reset
ABCDEFG
Display
Menu
Personalize
Others
SE2222HV
Dell 22 Monitor
Brightness / Contrast
Display Info
Auto Adjust
Color
DDC/CI
On
LCD Conditioning
Service Tag
Reset Others
Factory Reset
Display
ABCDEFG
Menu
Personalize
Others
Reset all settings under the Others setting menu to the factory
default.
Reset Others
Factory Reset
Reset all settings to the factory default.
│
OSD warning messages
The following Power Warning Message box applies to Brightness functions for the first time
when you adjust the Brightness level above the default level.
SE2222H
Dell 22 Monitor
Adjusting to this value will increase power consumption above the
default level. Do you want to continue?
Yes
No
SE2222H
SE2222HV
Dell 22 Monitor
Adjusting to this value will increase power consumption above the
default level. Do you want to continue?
Yes
No
SE2222HV
│
Before the Lock function is activated, the following message is displayed.
SE2222H
Dell 22 Monitor
Are you sure you want to lock the Menu Buttons?
To unlock the Buttons, refer to the User’s Guide.
Yes
No
SE2222H
SE2222HV
Dell 22 Monitor
Are you sure you want to lock the Menu Buttons?
To unlock the Buttons, refer to the User’s Guide.
Yes
No
SE2222HV
NOTE: The message may be slightly different according to the selected
settings.
│
Before the DDC/CI function is disabled, the following message is displayed.
SE2222H
Dell 22 Monitor
The function of adjusting display setting using PC application
will be disabled.
Do you wish to disable DDC/CI function?
Yes
No
SE2222H
SE2222HV
Dell 22 Monitor
The function of adjusting display setting using PC application
will be disabled.
Do you wish to disable DDC/CI function?
Yes
No
SE2222HV
When the monitor enters Standby mode, the following message appears.
SE2222H
Dell 22 Monitor
Going into Standby mode...
SE2222H
SE2222HV
Dell 22 Monitor
Going into Standby mode...
SE2222HV
│
If VGA or HDMI cable is not connected, a floating dialog box appears. The monitor will enter
Standby mode after 4 minutes if left at this state.
SE2222H
Dell 22 Monitor
No HDMI Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/SE2222H
SE2222H
SE2222H
Dell 22 Monitor
No VGA Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/SE2222H
SE2222H
SE2222HV
Dell 22 Monitor
No VGA Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/SE2222HV
SE2222HV
│
Setting up display resolution on your monitor
Setting display resolution to 1920 x 1080
For best performance, set the display resolution to 1920 x 1080 pixels by performing the
following steps:
In Windows 7:
1. Right-click on the desktop and click Screen Resolution.
2. Click the drop-down menu of the Screen Resolution and select 1920 x 1080.
3. Click OK.
In Windows 8 or Windows 8.1:
1. Select the Desktop tile to switch to classic desktop.
2. Right-click on the desktop and click Screen Resolution.
3. Click the drop-down menu of the Screen Resolution and select 1920 x 1080.
4. Click OK.
In Windows 10:
1. Right-click on the desktop and click Display Settings.
2. Click Advanced Display Settings.
3. Click the drop-down menu under Resolution and select 1920 x 1080.
4. Click Apply.
If you do not see the recommended resolution as an option, you may need to update your
graphics driver. Use one of the following methods to update the graphics driver:
Dell computer
driver for your graphics card.
2. After installing the drivers for your graphics adapter, attempt to set the resolution to
1920 x 1080 again.
NOTE: If you are unable to set the resolution to 1920 x 1080, please contact
Dell to enquire about a graphics adapter that supports these resolutions.
│
Non-Dell computer
In Windows 7:
1. Right-click on the desktop and click Personalization.
2. Click Change Display Settings.
3. Click Advanced Settings.
4. Identify your graphics controller supplier from the description at the top of the window.
For example, NVIDIA, AMD, Intel, and so on.
5. Refer to the graphic card provider website for updated driver. For example,
6. After installing the drivers for your graphics adapter, attempt to set the resolution to
1920 x 1080 again.
In Windows 8 or Windows 8.1:
1. Select the Desktop tile to switch to classic desktop.
2. Right-click on the desktop and click Personalization.
3. Click Change Display Settings.
4. Click Advanced Settings.
5. Identify your graphics controller supplier from the description at the top of the window.
For example, NVIDIA, AMD, Intel, and so on.
6. Refer to the graphic card provider website for updated driver. For example,
7. After installing the drivers for your graphics adapter, attempt to set the resolution to
1920 x 1080 again.
In Windows 10:
1. Right-click on the desktop and click Display Settings.
2. Click Advanced display settings.
3. Click Display adapter properties.
4. Identify your graphics controller supplier from the description at the top of the window.
For example, NVIDIA, AMD, Intel, and so on.
5. Refer to the graphic card provider website for updated driver. For example,
6. After installing the drivers for your graphics adapter, attempt to set the resolution to
1920 x 1080 again.
NOTE: If you are unable to set the recommended resolution, please contact
the manufacturer of your computer or consider purchasing a graphics
adapter that supports the video resolution.
│
Using tilt
You can tilt the monitor for the most comfortable viewing angle.
NOTE: The stand is not attached when the monitor is shipped from the
factory.
│
Troubleshooting
WARNING: Before you begin any of the procedures in this section, follow
Self-test
Your monitor provides a self-test feature that allows you to check if your monitor is functioning
properly. If your monitor and computer are properly connected but the monitor screen remains
dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.
2. Disconnect all video cables from the monitor. This way, the computer does not have to be
involved.
3. Turn on the monitor.
If the monitor is working correctly, it detects that there is no signal and one of the following
message appears. While in self-test mode, the power LED remains white.
SE2222H
Dell 22 Monitor
No HDMI Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/SE2222H
SE2222H
SE2222H
Dell 22 Monitor
No VGA Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/SE2222H
SE2222H
│
SE2222HV
Dell 22 Monitor
No VGA Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/SE2222HV
SE2222HV
NOTE: This message also appears during normal operation, when the video
cable is disconnected or damaged.
4. Turn off your monitor and reconnect the video cable; then turn on your computer and the
monitor.
If your monitor remains dark after you reconnect the cables, check your video controller and
computer.
│
Built-in diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if any screen abnormality
you experience is an inherent problem with your monitor, or with your computer and video card.
1 2 3 4
Label Description
Button 1
Button 2
Button 3
Button 4
1
2
3
4
To run the built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the screen).
2. Press and hold Button 4 for about 4 seconds and wait for a pop up menu.
3. Use Button 1 or 2 to select the
and press
to confirm.
A gray test pattern appears at the beginning of the diagnostic program.
4. Carefully inspect the screen for abnormalities.
5. Press Button 1 to change the test patterns.
6. Repeat steps 4 and 5 to inspect the display in red, green, blue, black, white and text
screens.
7. When in White color test screen, check for white color uniformity and if there white color
appears greenish/reddish, etc.
8. Press Button 1 to end the diagnostic program.
│
Common problems
The following table provides general information about common monitor problems
you might encounter and the possible solutions:
Common symptoms
Possible solutions
No video/Power LED off
• Ensure that the video cable connecting the monitor and the computer is
properly connected and secure.
• Verify that the power outlet is functioning properly using any other electrical
equipment.
• Ensure that the power button is pressed.
No video/Power LED on
• Increase brightness and contrast controls using the OSD.
• Perform monitor self-test feature check.
• Check for bent or broken pins in the video cable connector.
• Run the built-in diagnostics.
Poor focus
• Eliminate video extension cables.
• Reset the monitor to Factory Settings (Factory Reset).
• Change the video resolution to the correct aspect ratio.
Shaky/Jittery video
Missing pixels
• Reset the monitor to Factory Settings (Factory Reset).
• Check environmental factors.
• Relocate the monitor and test in another room.
• Cycle power On-off.
• Pixel that is permanently off is a natural defect that can occur in LCD
technology.
• For more information about Dell Monitor Quality and Pixel Policy, see Dell
Support site at
Stuck-on pixels
• Cycle power On-off.
• Pixel that is permanently off is a natural defect that can occur in LCD
technology.
• For more information about Dell Monitor Quality and Pixel Policy, see Dell
Support site at:
Brightness problems
Geometric distortion
Horizontal/Vertical lines
• Reset the monitor to Factory Settings (Factory Reset).
• Adjust brightness and contrast controls using OSD.
• Reset the monitor to Factory Settings (Factory Reset).
• Adjust horizontal and vertical controls using OSD.
• Reset the monitor to Factory Settings (Factory Reset).
• Perform monitor self-test feature check and determine if these lines are also
in self-test mode.
• Check for bent or broken pins in the video cable connector.
• Run the built-in diagnostics.
│
Common symptoms
Possible solutions
Synchronization problems
• Reset the monitor to Factory Settings (Factory Reset).
• Perform monitor self-test feature check to determine if the scrambled
screen appears in self-test mode.
• Check for bent or broken pins in the video cable connector.
• Restart the computer in safe mode.
Safety related issues
Intermittent problems
• Do not perform any troubleshooting step.
• Contact Dell immediately.
• Ensure that the video cable connecting the monitor to the computer is
connected properly and is secure.
• Reset the monitor to Factory Settings (Factory Reset).
• Perform monitor self-test feature check to determine if the intermittent
problem occurs in self-test mode.
Missing color
Wrong color
• Perform monitor self-test feature check.
• Ensure that the video cable connecting the monitor to the computer is
connected properly and is secure.
• Check for bent or broken pins in the video cable connector.
• Try different Preset Modes in Color settings OSD. Adjust R/G/B value in
Custom Color in Color settings OSD.
• Change the Input Color Format to RGB or YCbCr/YPbPr in the Color
settings OSD.
• Run the built-in diagnostics.
Image retention from a static • Set the screen to turn off after a few minutes of screen idle time. These can
image left on the monitor for
a long period of time
be adjusted in Windows Power Options or Mac Energy Saver setting.
• Alternatively, use a dynamically changing screensaver.
Video ghosting or
overshooting
• Change the Response Time in the Display OSD to Fast or Normal
depending on your application and usage.
│
Product-specific problems
Specific symptoms
Possible solutions
Screen image is too small
• Check the Aspect Ratio setting in the Display settings OSD.
• Reset the monitor to Factory Settings (Factory Reset).
Cannot adjust the monitor
with the buttons on the
bottom of the panel
• Turn off the monitor, unplug the power cord, plug it back, and then turn on
the monitor.
• Check if the OSD menu is locked. If yes, press and hold the Exit button
(button 4) for four seconds to unlock.
No input signal when user
controls are pressed
• Check the signal source. Ensure that the computer is not in standby or
sleep mode by moving the mouse or pressing any key on the keyboard.
• Check if the video cable is plugged in properly. Disconnect and reconnect
the video cable if necessary.
• Reset the computer or video player.
The picture does not fill the • Due to different video formats (aspect ratio) of DVDs, the monitor may
entire screen
display in full screen.
• Run the built-in diagnostics.
│
Appendix
FCC Notices (U.S. Only) and Other Regulatory Information
For FCC notices and other regulatory information, see the regulatory compliance
Contact Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find
contact information on your purchase invoice, packing slip, bill, or Dell
product catalog.
Dell provides several online and telephone-based support and service options.
Availability varies by country and product, and some services may not be availa-
ble in your area.
EU product database for energy label and product information sheet
│
|