Camera User Guide
• Make sure yod thguide, including the “Safety
Precautions” beore using the camera.
• Readinthis guiwill help you learn to use the camera
properly
• Store this guide safely so that you can use it in the future.
ENGLISH
Preliminary Notes and Legal Information
•
•
Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
Images recorded by the camera are intended for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
•
•
The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
Although the LCD monitor and viewfinder are produced under extremely
high-precision manufacturing conditions and more than 99.99% of the
pixels meet design specifications, in are cses some pixels may be
defective or may appear as red or dotsThis does not indicate
camera damage or affect red iages.
•
•
The LCD monitor may be covwith a thin plastic film for protection
against scratches durig shipment. If covered, remove the film before
using the camera.
When the camera is used over an extended period, it may become warm.
This does not indicate damage.
Organization of Camera User Guide
The following guides are included, each used for different purposes.
•
Gives basic instructions, from initial preparations to shooting, playback,
and saving on a computer
•
Practical guide that introduces other camera basics and describes
shooting and playback options
3
Part Names and Conventions in This Guide
Zoom lever
Lamp
Shooting: <i(telephoto)> /
<
(Framing Assist – Lock)>
<j(wide angle)>
button
Playback: <k(magnify)> /
Focal length markings (approx.)
Lens
<g(index)>
Shutter button
Strap mount
Mode dial
ns hood/filter adapter mount
(Framing Assist – Seek)>
btton
Flash
Tripod socket
Hot shoe
Lock release switch
Memory card/battery cover
DC coupler cable port
Microphone
<h(Flash)> button
Speaker
•
•
In this guide, icons are used to represent the corresponding camera
buttons and dials on which they appear or which they resemble.
The following camera buttons and controls are represented by icons.
<q> Left button on back
<o> Up button on back
<r> Right button on back
< p>
Down button on back
< 5> Control dial on back
•
•
•
Shooting modes and on-screen icons and text are indicated in brackets.
: Important information you should know
: Notes and tips for expert camera use
• =xx: Pages with related information (in this example, “xx” represents a
page number)
•
Instructions in this guide apply to the camera under default settings.
4
Part Names and Conventions in This Guide
Screen (LCD monitor)
HDMITM terminal
<
(Shortcut)> / <c(Direct
<n> button
<l(Display)> button
<e(Macro)> / <f(Manual
focs)> / Left button
print)> button
Diopter adjustment dial
Viewfinder
<1(Playback)> button
Indicator
Power button
Movie button
Remote terminal
<bExposure compensation)> /
<
Filter image display)> / Up
button
<
(Self-timer)> / Right button
FUNC./SET button
<
> / Down button
<
(AF Frame Selector)> /
Control dial
<a(Single image erase)> button
AV OUT (Audio/video output) /
DIGITAL terminal
zzTurning the control dial is one way to
choose setting items, switch images, and
perform other operations. Most of these
operations are also possible with the
<o><p><q><r> buttons.
•
•
For convenience, all supported memory cards are simply referred to as
“the memory card”.
The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Still Images
:
Indicates that the function is used when shooting or
viewing still images.
Movies
:
Indicates that the function is used when shooting or
viewing movies.
5
Table of Contents
3
Table of Contents...........................6
4
1
5
2
6
Table of Contents
6
7
8
9
7
Contents: Basic Operations
4
Shoot
Shooting people well
I P
Portraits
Against Snow
Smooth Skin
Matching specific scenes
t
Fireworks
Sports
Night Scenes
Applying special effects
Vivid Colors
Poster Effect
Fish-Eye Effect
Miniature Effect
Toy Camera Effect
Soft Focus
Monochrome
zzAdd a date stamp................................................................................. 61
8
Contents: Basic Operations
zzUse Face ID ................................................................................. 63, 163
1
View
zzOn a TV.............................................................................................. 218
zzOn a computer ..................................................................................... 29
zzErase images ..................................................................................... 179
E
Shoot/View Movies
zzShoot movies ............................................................................... 46, 108
c
Print
Save
9
Safety Precautions
• Before using the product, please ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
• The safety precautions noted on the following pages are intended to
prevent injuries to yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold
accessories you use.
Denotes the possibility of serious injury or death.
Warning
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In
particular, remain at least 1 meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heat to the product.
• Avoid dropping or subjecting the producto severe impacts.
• To avoid the risk of injury, do not touthe iterior of the product if
it has been dropped or otherwise daed.
• Stop using the product immedif t emits smoke, a strange
smell, or otherwise behaves abally.
• Do not use organic solvnts such s alcohol, benzine, or thinner to
clean the product.
• Do not let the product come into contact with water (e.g. sea water)
or other liquids.
• Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior,
immediately turn the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult
your camera distributor or a Canon Customer Support Help Desk.
• Do not look through the viewfinder at bright light sources (such as
the sun on a clear day).
This could damage your eyesight.
• Use only the recommended battery.
• Do not place the battery near or in direct flame.
• Unplug the power cord periodically, and using a dry cloth, wipe away
any dust and dirt that has collected on the plug, the exterior of the
power outlet, and the surrounding area.
• Do not handle the power cord with wet hands.
10
Safety Precautions
• Do not use the equipment in a manner that exceeds the rated capacity
of the electrical outlet or wiring accessories. Do not use if the power
cord or plug are damaged, or not fully plugged into the outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact
the terminals or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
• Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the camera in places where use of electronic devices is
restricted, such as inside airplanes and medical facilities.
• Do not play the supplied CD-ROM(s) in any CD player that does not
support data CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the
loud sounds of a CD-ROM played on an audiCD player (music player).
Additionally, this could damage the spekers.
Denotes tsility of injury.
Caution
• When holding the camra by the strap, be careful not to bang it, subject
it to strong impacts or shocks, or let it get caught on other objects.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
• When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
• Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery,
resulting in electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
• The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
11
Safety Precautions
• When using the separately sold lens filters, be sure to attach them firmly.
If the lens becomes loose and falls off, it may crack, and the shards of glass
may lead to cuts.
Caution
Denotes the possibility of damage to the equipment.
• Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
• When using the camera on a beach or at a windy location, be careful
not to allow dust or sand to enter the camera.
This may cause the product to malfunction.
• In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials
stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other
foreign matter from the flash to prevent heat build-up and damage to the unit.
• Remove and store the battery when you arnot using the camera.
If the battery is left inside the camera, dacaued by leakage may occur.
• Before you discard the battery, coverminals with tape or other insulators.
Contacting other metal mateials md to fire or explosions.
• Unplug the battery chargr from the power outlet after charging is
complete, or when you are not using it.
• Do not place anything, such as cloth, on top of the battery charger
while it is charging.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
• Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion,
resulting in fire or damage.
• When putting the camera in your bag, close the screen to face inward
to ensure that hard objects do not come into contact with the screen.
• Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
12
Initial Preparations
Prepare for shooting as follows.
Attaching Accessories
1 Attach the strap.
zzAttach the included strap to the camera
as shown.
zzOn the other side of the camera, attach
the strap the same way.
2 Attach the lens cap to the strap.
zzRemove the lens cap from the camera
and attach the lens cap cord to the strap.
zzAlways remove the lens cap before
turning the camera on. Try clipping the
lens cap to the neck strap when the cap
is not in use.
zzKeep the lens cap on the lens when the
camera is not in use.
Holding the Camera
zzPlace the strap around your neck.
zzWhen shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.
14
Initial Preparations
Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
1 Remove the battery cover and
insert the battery in the charger.
zzRemove the cover from the battery, align
the ▲ marks on the battery and charger,
and insert the battery by pushing it in (
and down ( ).
)
2 Charge the battery.
zzCB-2LC: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
zzCB-2LCE: Plug the power cord into the
charger, thn plug the other end into a
poutlet.
CB-2LC
e charging lamp turns orange and
rging begins.
XXWhen the charging is finished, the lamp
turns green.
CB-2LCE
3 Remove the battery.
zzAfter unplugging the battery charger,
remove the battery by pushing it in (
)
and up ( ).
• To protect the battery and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
• For details on charging time and the number of shots and recording time
15
Initial Preparations
Inserting the Battery and Memory Card
Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
1 Check the card’s write-protect
tab.
zzRecording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
2 Open the cover.
zzSlide the swi( ) and open the cover
(
).
3 nsert the battery.
zzWhile pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
zzIf you insert the battery facing the wrong
way, it cannot be locked into the correct
position. Always confirm that the battery
is facing the right way and locks when
inserted.
Terminals
Battery
Lock
16
Initial Preparations
4 Insert the memory card.
zzInsert the memory card facing as shown
until it clicks into the locked position.
zzMake sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
Label
5 Close the cover.
zzLower the cover in the direction of the
arrow and press it until it clicks into the
closed position.
• For guidelines on how many shots or hours of recording can be saved on
Removing the Battery Memory Card
Reove the battery.
zzOpen the cover and press the battery
lock in the direction of the arrow.
XXThe battery will pop up.
Remove the memory card.
zzPush the memory card in until it clicks,
and then slowly release it.
XXThe memory card will pop up.
17
Initial Preparations
Using the Screen
Prepare the screen for use.
zzOpen the screen ( ) and rotate it toward
the lens 180° ( ).
zzClose the screen in this orientation ( ).
• The screen can only open to approximately 175° in direction . Be
careful not to open the screen any further than this, as it will damage
the camera.
Adjusting the Screen Angle and Orientation
zzYou can adjusthe angle and orientation
of the screen needed, to suit shooting
condit
zzotethe screen when the camera
n use, always keep it closed and
facthe camera body.
• Open the screen to activate it when the camera is on. This will deactivate the
viewfinder. Similarly, close the screen (facing the camera body) to deactivate
it and activate the viewfinder.
• When including yourself in shots, you can view a mirror image of yourself by
rotating the screen around toward the front of the camera. To cancel reverse
display, press the <n> button, choose [Reverse Disp.] on the [4] tab,
and press the <q><r> buttons to choose [Off].
18
Initial Preparations
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this way
is recorded in image properties when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
1 Turn the camera on.
zzPress the power button.
XXThe [Date/Time] screen is displayed.
2 Set the date and time.
zzPress the <q><r> buttons to choose an
option.
zzPrhe <o><p> buttons or turn the
<5dial to specify the date and time.
en finished, press the <m> button.
3 Set the home time zone.
zzPress the <q><r> buttons or turn the
<5> dial to choose your home time
zone.
4 Finish the setup process.
zzPress the <m> button when finished.
After a confirmation message, the setting
screen is no longer displayed.
zzTo turn off the camera, press the power button.
19
Initial Preparations
• Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
• To set daylight saving time (1 hour ahead), choose [
] in step 2 and then
choose [ ] by pressing the <o><p> buttons or turning the <5> dial.
Changing the Date and Time
Adjust the date and time as follows.
1 Access the camera menu.
zzPress the <n> button.
2 ChooDate/Time].
zthzoom lever to choose the [3]
t
zzPress the <o><p> buttons or turn the
<5> dial to choose [Date/Time], and
then press the <m> button.
3 Change the date and time.
settings.
zzPress the <n> button to close the
menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery or connect the camera to an AC adapter kit (sold separately,
• Once the date/time battery is depleted, the [Date/Time] screen will be
the date and time.
20
Initial Preparations
Display Language
Change the display language as needed.
1 Enter Playback mode.
zzPress the <1> button.
2 Access the setting screen.
zzPress and hold the <m> button, and
then immediately press the <n>
button.
3 Set the display language.
zzPress the o><p><q><r> buttons or
tur<5dial to choose a language,
d ten press the <m> button.
ce the display language has been set,
the setting screen is no longer displayed.
• The current time is displayed if you wait too long in step 2 after pressing the
m
m
<
<
> button before you press the <n> button. In this case, press the
> button to dismiss the time display and repeat step 2.
• You can also change the display language by pressing the <n> button
and choosing [Language ] on the [3] tab.
21
Still Images
Movies
Trying the Camera Out
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1 Turn the camera on.
zzPress the power button.
XXThe startup screen is displayed.
2 Enter <A> mode.
zzSet the mode al to <A>.
zzAim thmera at the subject. The
cera ill make a slight clicking noise
etemines the scene.
XXIcrepresenting the scene and image
stabilization mode are displayed in the
upper right of the screen.
XXFrames displayed around any detected
subjects indicate that they are in focus.
3 Compose the shot.
zzTo zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle).
22
Trying the Camera Out
4 Shoot.
Shooting Still Images
Focus.
zzPress the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and green frames are displayed
to indicate image areas in focus.
zzIf [Raise the flash] is displayed, lift the
flash with your finger to prepare it for use.
If you prefer not to use the flash, push it
down with your finger, into the camera.
ot.
zzPress the shutter button all the way
down.
XXAs the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
zzKeep the camera still until the shutter
sound ends.
XXYour shot is only displayed until the
camera is ready to shoot again.
23
Trying the Camera Out
Shooting Movies
Start shooting.
zzPress the movie button. The camera
beeps once as recording begins, and
[
Rec] is displayed with the elapsed time.
Elapsed Time
XXBlack bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
XXFrames displayed around any detected
faces indicate that they are in focus.
zzOnce recording begins, you can take your
finger off the movie button.
Finish shooting.
zzPress thmovbutton again to stop
shootihe camera beeps twice as
instops.
24
Trying the Camera Out
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
zzPress the <1> button.
XXYour last shot is displayed.
2 Browse through your images.
zzTo view the previous image, press
the <q> button or turn the <5> dial
counterclockwise. To view the next
image, press the <r> button or turn the
<5> dal ockwise.
zzPrnd hld the <q><r> buttons to
brothrough images quickly.
zzTo access Scroll Display mode, turn the
5
5
<
<
> dial rapidly. In this mode, turn the
> dial to browse through images.
zzTo return to single-image display, press
the <m> button.
zzMovies are identified by a [
] icon. To
play movies, go to step 3.
25
Trying the Camera Out
3 Play movies.
zzPress the <m> button to access the
movie control panel, choose [ ] (either
press the <q><r> buttons or turn the
<5> dial), and then press the <m>
button again.
XXPlayback now begins, and after the movie
Volume
is finished, [
] is displayed.
zzTo adjust the volume, press the <o><p>
buttons.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
Erasing the Images
You can choose and erase unneeded imaes onby one. Be careful when
erasing images, because they cannot be vere.
1 se an image to erase.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
26
Trying the Camera Out
2 Erase the image.
zzPress the <a> button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [Erase], and then press the <m>
button.
XXThe current image is now erased.
zzTo cancel erasure, press the <q><r>
buttons or turn the <5> dial to choose
[Cancel], and then press the <m>
button.
27
Included Software, PDF Manuals
The software and PDF manuals on the included DIGITAL CAMERA Solution
installation, and saving images to a computer.
Software
After installing the software on the CD-ROM, you can do the following
things on your computer.
CameraWindow
zzImport images and change camera settings
ImageBrowser EX
zzManage images: view, search, and organize
zzPrint and edit images
Digital Photo Professional
zzBrowse, process and edit RAW images
Auto Update Function
Using the included software, you can updto the latest version, and
download new functions via the In(some software excluded). Be sure
to install the software on a cmputean Internet connection so you can
use this function.
• Internet access is required to use this function, and any ISP
account charges and access fees must be paid separately.
PDF Manuals
Camera User Guide
zzRefer to this guide for a more in-depth understanding of camera
operation.
Software Guide
zzRefer to this guide when using the included software. The guide can be
accessed from the help system of included software (some software
excluded).
28
Included Software, PDF Manuals
System Requirements
The included software can be used on the following computers. Adobe
Reader is required to view the PDF manuals.
Windows
Macintosh
Operating
System
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Mac OS X 10.6 – 10.7
Computers running one of the above operating systems
(preinstalled), with an included USB port and Internet connection*
Computer
Processor
Still images: Mac OS X 10.7:
Still images: 1.6 GHz or higher, Core 2 Duo or higher,
Movies: Core 2 Duo 2.6 GHz
or higher
Mac OS X 10.6: Core Duo 1.83
GHz or higher, Movies: Core 2
Duo 2.6 GHz or higher
Windows 7 (64 bit): 2 GB or
more
Windows 7 (32 bit),
Windows Vista (6bit, 3it),
Windows XP:
Mac OS X 10.7: 2 GB or more
ac OS X 10.6: 1 GB or more
(still images), 2 GB or more
(movies)
RAM
1 GB or more (ses), 2 GB
or more movies)
Interfaces
USB
Free Hard Disk
Space
640 MB or more*
1024 x 768 resolution or higher
750 MB or more
Display
* Silverlight 4 or later (max. 100 MB) must be installed, and in Windows XP, Microsoft
.NET Framework 3.0 or later (max. 500 MB) must be installed. Installation may take
some time, depending on computer performance.
• Check the Canon website for the latest system requirements, including
supported OS versions.
29
Included Software, PDF Manuals
Installing the Software
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Using the software auto update function, you can update to the latest
version and download new functions via the Internet (some software
excluded), so be sure to install the software on a computer with an Internet
connection.
What you will need:
zzComputer
zzUSB cable (camera end: Mini-B)
1 Insert the CD-ROM in the
computer’s CD-ROM drive.
zzInsert the included CD-ROM (DIGITAL
compuCDROM drive.
zzOa Mintosh computer, after inserting
c, ouble-click the desktop disc
icopen it, and then double-click the
] icon displayed.
2 Begin the installation.
zzClick [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
30
Included Software, PDF Manuals
3 When a message is displayed
prompting you to connect
the camera, connect it to a
computer.
zzAfter ensuring that the camera is off,
open the cover ( ). Holding the smaller
plug of the USB cable in the orientation
shown, insert it fully into the camera
terminal ( ).
zzInsert the larger plug of the USB cable
in the computer’s USB port. For details
about USB connections on the computer,
refer to the omputer user manual.
4 stall the files.
zrn the camera on, and follow the
on-screen instructions to complete the
installation process.
XXThe software will connect to the Internet
to update to the latest version and
download new functions. Installation may
take some time, depending on computer
performance and the Internet connection.
zzClick [Finish] or [Restart] on the screen
after installation and remove the CD-
ROM when the desktop is displayed.
zzTurn the camera off and disconnect the
cable.
31
Included Software, PDF Manuals
• When not connected to the Internet, there are the following limitations.
- The screen in step 3 will not be displayed.
- Some functions may not be installed.
• The first time you connect the camera to the computer, drivers will be
installed, so it may take a few minutes until camera images are accessible.
• If you have several cameras that were bundled with ImageBrowser EX on
the included CD-ROMs, be sure to use each camera with their included CD-
ROM and follow the on-screen installation instructions for each. Doing so will
ensure that each camera will receive the correct updates and new functions
via the auto update function.
Saving Images to a Computer
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
1 Connect the camera to the
computer.
camera a computer.
2 the camera on to access
CameraWindow.
zzPress the <1> button to turn the camera
on.
zzOn a Macintosh computer,
CameraWindow is displayed when a
connection is established between the
camera and computer.
zzFor Windows, follow the steps introduced
below.
zzIn the screen that displays, click the [
]
link to modify the program.
32
Included Software, PDF Manuals
zzChoose [Downloads Images From Canon
Camera using Canon CameraWindow]
and then click [OK].
zzDouble click [
].
CameraWindow
3 Save the images to the
computer.
zzClick [Impot Images from Camera], and
theck [Iport Untransferred Images].
Xmas are now saved to the Pictures
er on the computer, in separate
ers named by date.
zzAfter images are saved, close
CameraWindow, press the <1> button
to turn the camera off, and unplug the
cable.
zzFor instructions on viewing images on
a computer, refer to the Software Guide
33
Included Software, PDF Manuals
• In Windows 7, if the screen in step 2 is not displayed, click the [ ] icon in
the taskbar.
• To start CameraWindow in Windows Vista or XP, click [Downloads Images
From Canon Camera using Canon CameraWindow] on the screen displayed
when you turn the camera on in step 2. If CameraWindow is not displayed,
►
►
click the [Start] menu and choose [All Programs]
[Canon Utilities]
►
[CameraWindow]
[CameraWindow].
• On a Macintosh computer, if CameraWindow is not displayed after step 2,
click the [CameraWindow] icon in the Dock (the bar at the bottom of the
desktop).
• Although you can save images to a computer simply by connecting your
camera to the computer without using the included software, the following
limitations apply.
- It may take a few minutes after you connect the camera to the computer
until camera images are accessible.
- Images shot in vertical orientation may be saed in horizontal orientation.
- RAW images (or JPEG images recorded wiRAW images) may not be
saved.
- Image protection settings macled from images saved to a
computer.
- Some problems may ccur whving images or image information,
depending on the opeating ystem version, the software in use, or image
file sizes.
- Some functions provided by the included software may not be available,
such as editing movies or returning images to the camera.
Using the PDF Manuals
Camera User Guide
zzAccess this guide by double-clicking the desktop shortcut icon.
Software Guide
zzThe guide can be accessed from the help system of included software
(some software excluded).
• It may not be possible to install the PDF manuals on computers that do
manuals on a computer that supports Adobe Reader by copying the PDF
files in the Readme folder on the CD-ROM directly to a convenient location
on the computer.
34
Accessories
Included Accessories
Neck Strap
NS-DC11
Battery Pack
NB-10L*1
Battery
Charger
Lens Cap
(with cord)
DIGITAL
CAMERA
Solution Disk
(with terminal cover) CB-2LC/2LCE*1
USB Cable (camera end: Mini-B)*2
Memory Card
Card Reader
Cables
Windows/
Macintosh
Computer
Power
HDMI Cable HTC-100
So AV able
ADC400ST
AC Adapter Kit
ACK-DC80
TV/Video
System
Flash Unit
Canon PictBridge-
Compatible Printers
Speedlite*3
600EX-RT, 600EX, 580EX II,
430EX II, 320EX, 270EX II
Lens Accessories
Other Accessories
Canon-brand Lens Filter
(67 mm dia.)*4
Lens Hood
LH-DC60
Remote Switch
RS-60E3
*1Also available for purchase separately.
*2A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
*3These accessories are also supported: Speedlite 580EX, 430EX, 270EX, and
220EX, Speedlite Transmitter ST-E2, and Speedlite Bracket SB-E2.
*4Requires Filter Adapter FA-DC67A.
35
Accessories
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire,
etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage
and/or explosion of a battery pack). Please note that this warranty does not apply to
repairs arising out of the malfunction of non-genuine Canon accessories, although you
may request such repairs on a chargeable basis.
36
On/Off
Shooting Mode
zzPress the power button to turn the
camera on and prepare for shooting.
zzTo turn the camera off, press the power
button again.
Playback Mode
zzPress the <1> button to turn the camera
on and view your shots.
zzTo turn the camera off, press the <1>
button again.
• To switch to Playback mode from Shooting mode, press the <1> button.
• To switch to Shooting mode from Playback mode, press the shutter button
• The lens will be retracted after about one mnuonce the camera is in
Playback mode. You can turn the camoff wen the lens is retracted by
pressing the <1> button.
Power-Saving Featur(Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates
the screen (Display Off) and then turns itself off after a specific period of
inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself
off. To activate the screen and prepare for shooting when the screen is off
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of
inactivity.
• Adjust the timing of automatic camera and screen deactivation as needed
• Power saving is not active while the camera is connected to a computer
38
Shutter Button
To ensure your shots are in focus, always press the shutter button lightly
(halfway) initially. Once the subject is in focus, press the button all the way
down to shoot.
In this manual, shutter button operations are described as pressing the
button halfway or all the way down.
1 Press halfway. (Press lightly to
focus.)
zzPress the shutter button halfway. The
camera beeps twice, and AF frames are
displayed around image areas in focus.
2 Press all the way down. (From
the halfway position, press fully
to shoot)
XXThe amershoots, as a shutter sound
is pd.
ep the camera still until the shutter
nd ends.
• Images may be out of focus if you shoot without initially pressing
the shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
39
Viewfinder
Adjust the viewfinder display for sharper images by adjusting the diopter, as
follows.
1 Activate the viewfinder.
zzPress the <l> button repeatedly until
2 Adjust the diopter.
zzAs you look through the viewfinder, turn
the dial one way or the other so that
images look sharp.
Shooting Modes
Use the mode dial to access each shootode
P, Tv, Av, M, C1, and C2 Modes
Movie Mode
Take a variety of shots using your
For shooting movies
You can also shoot
movies when the
mode dial is not
set to Movie mode,
simply by pressing
the movie button.
Auto Mode
Fully automatic
shooting, with camera-
determined settings
Movie Digest Mode
You can make a short movie of a
day just by shooting still images
Creative Filters Mode
Add a variety of effects
to images when shooting
Scene Mode
Shoot with optimal settings for
40
FUNC. Menu
Configure commonly used shooting functions through the FUNC. menu as
follows.
Note that menu items and options vary depending on the shooting mode
1 Access the FUNC. menu.
zzPress the <m> button.
2 Choose a menu item.
zzPress the <o><p> buttons to choose a
menu item.
XXAvailable options are shown at the bottom
of the screen.
Options
Menu Items
3 Choose an option.
zzPress the <q><r> buttons or turn the
<5> dial to choose an option.
zzOptions labeled with a [
] icon can
be configured by pressing the <l>
button.
4 Finish the setup process.
zzPress the <m> button.
XXThe screen before you pressed the
<m> button in step 1 is displayed again,
showing the option you configured.
• To undo any accidental setting changes, you can restore the camera’s
41
MENU Menu
Configure a variety of camera functions through other menus as follows.
Menu items are grouped by purpose on tabs, such as shooting [4],
playback [1], and so on. Note that available settings vary depending on
1 Access the menu.
zzPress the <n> button.
2 Choose a tab.
zzMove the zoom lever to choose a tab.
zzAfter you have pressed the <o><p>
buttons to choose a tab initially, you can
switch between tabs by pressing the
<q><r> buttos.
3 Choose a setting.
zzPress the <o><p> buttons or turn the
<5> dial to choose a setting.
zzTo choose settings with options not
shown, first press the <m> or <r>
button to switch screens, and then either
press the <o><p> buttons or turn the
<5> dial to select the setting.
zzTo return to the previous screen, press
the <n> button.
4 Choose an option.
zzPress the <q><r> buttons to choose an
option.
42
Shooting Display Options
5 Finish the setup process.
zzPress the <n> button to return to the
screen displayed before you pressed the
<n> button in step 1.
• To undo any accidental setting changes, you can restore the camera’s
Shooting Display Options
Press the <l> button to view other information on the screen, or to hide
Open the screen to activate it when the camera is on. This will deactivate
the viewfinder. Similarly, close the screen (fang the camera body) to
LCD Monitor (Screen)
ewfinder
No information is Information is
No information is displayed
Information is displayed
displayed
displayed
• Screen brightness is automatically increased by the night display function
when you are shooting under low light, making it easier to check how shots
are composed. However, on-screen image brightness may not match the
brightness of your shots. Note that any on-screen image distortion or jerky
subject motion will not affect recorded images.
43
Indicator Display
depending on the camera status.
Indicator
Status
Color
Camera Status
On
Camera on
Green
Blinking Recording/reading/transmitting images
• When the indicator blinks green, never turn the camera off, open
the memory card/battery cover, or shake or jolt the camera, which
may corrupt images or damage the camera or memory card.
Clock
You can check the current time.
zzPress and holthe <m> button.
XXThe cutime appears.
zhod the camera vertically while
uhe clock function, it will switch
to vertical display. Press the <q><r>
buttons or turn the <5> dial to change
the display color.
zzPress the <m> button again to cancel
the clock display.
• When the camera is off, press and hold the <m> button, then press the
power button to display the clock.
44
Still Images
Movies
Shooting (Smart Auto)
For fully automatic selection at optimal settings for specific scenes, simply
let the camera determine the subject and shooting conditions.
1 Turn the camera on.
zzPress the power button.
XXThe startup screen is displayed.
2 Enter <A> mode.
zzSet the mode dial to <A>.
zzAim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
XXIcons represeing the scene and image
stabilizn mde are displayed in the
Xs dsplayed around any detected
sts indicate that they are in focus.
3 Compose the shot.
zzTo zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle). (A zoom bar
Zoom Bar
showing the zoom position is displayed.)
zzTo zoom in or out quickly, move the zoom
lever all the way toward <i> (telephoto)
or <j> (wide angle), and to zoom in
or out slowly, move it just a little in the
desired direction.
Focus Range (approx.)
46
Shooting (Smart Auto)
4 Shoot.
Shooting Still Images
Focus.
zzPress the shutter button halfway. The
camera beeps twice after focusing, and
green frames are displayed to indicate
image areas in focus.
XXSeveral green frames are displayed when
multiple areas are in focus.
zzIf [Raise the flash] is displayed, lift the
flash with yur finger to prepare it for use.
If yoprefenot to use the flash, push it
dowith your finger, into the camera.
Shoot.
zzPress the shutter button all the way
down.
XXAs the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
zzKeep the camera still until the shutter
sound ends.
XXYour shot is only displayed until the
camera is ready to shoot again.
47
Shooting (Smart Auto)
Shooting Movies
Start shooting.
zzPress the movie button. The camera
beeps once as recording begins, and
[
Rec] is displayed with the elapsed time.
Elapsed Time
XXBlack bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
XXFrames displayed around any detected
faces indicate that they are in focus.
zzOnce recording begins, you can take your
finger off the movie button.
Resize the subject and
recompose te shot as needed.
zzTo resihe subject, do the same thing
Her, note that the sound of camera
operations will be recorded, and movies
shot at zoom factors shown in blue will
look grainy.
zzWhen you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finish shooting.
zzPress the movie button again to stop
shooting. The camera beeps twice as
recording stops.
zzRecording will stop automatically when
the memory card becomes full.
48
Shooting (Smart Auto)
Still Images/Movies
• To activate the screen when the camera is on but the screen is
blank (when display is set to the viewfinder), press the <l>
button repeatedly.
• To restore camera sound if you have accidentally deactivated it
(by holding the <l> button down while turning the camera on),
press the <n> button and choose [Mute] on the [3] tab, and
then press the <q><r> buttons to choose [Off].
Still Images
• A flashing [ ] icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or
take other measures to keep it still.
• If your shots are dark despite the flasfiring, move closer to
• The subject may be too e ihe camera only beeps once when
you press the shutter balfway. For details on the focusing
• To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
• A blinking [h] icon displayed when you attempt to shoot indicates
that shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press
the shutter button all the way down and wait, or release it and
press it again.
• The shutter sound will not be played when the Sleeping and
• The flash firing during shots indicates that the camera has automatically
attempted to ensure optimal colors in the main subject and background
(Multi-area White Balance).
49
Shooting (Smart Auto)
Movies
• Before shooting a movie, lower the
flash with your finger. Be careful not to
touch the microphone when shooting
a movie. Leaving the flash raised, or
blocking the microphone may prevent
audio from being recorded or may
cause the recording to sound muffled.
Microphone
• Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
• Once movie recording begins, a smaller image display area (field
of view) is shown, with the subject enlarged. This change is due
to rotational image stabilization. To shoot subjects at the same
size shown before shooting, adjust the image stabilization setting
• To correct suboptimal image colt maoccur in [ ] movie
button to stop recording, an pess it again to resume
recording.
• Audio is recorded in stereo.
50
Shooting (Smart Auto)
Movies
Still Images
Scene Icons
In <A> mode, shooting scenes determined by the camera are indicated
by the icon displayed, and corresponding settings are automatically
selected for optimal focusing, subject brightness, and color. Depending on
Background
Normal Backlit
Dark*
Sunsets Spotlights
Subject
People
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
In Motion
Shadows on Face
Smiling
–
Sleeping
Babies
Smiling
Sleeping
Children (In Motion)
Other Subjects
In Motion
–
–
–
–
–
At Close Range
* Tripod Used
The background color of icons is light blue when the background is a blue sky,
dark blue when the background is dark, and gray for all other backgrounds.
The background color of icons is light blue when the background is a blue sky,
and gray for all other backgrounds.
• The background color of [ ], [ ], [ ], [ ], and [ ] is dark blue, and the
background color of [ ] is orange.
• When shooting movies, only People, Other Subjects, and At Close Range icons will be displayed.
• When shooting with the self-timer, People (In Motion), Smiling, Sleeping, Babies (Smiling),
Babies (Sleeping), Children, Other Subjects (In Motion) icons will not be displayed.
(Smiling), Babies (Sleeping), and Children icons will not be displayed.
51
Shooting (Smart Auto)
• If the flash is set to [ ], the Backlit icons for Smiling and Children will not be
displayed.
• Babies, Babies (Smiling), Babies (Sleeping), and Children icons will be displayed
when [Face ID] is set to [On], and the face of a registered baby (under two years old)
match actual shooting conditions, or if it is not possible to shoot
with your expected effect, color, or brightness.
Continuous Shooting Scenes
If you shoot a still image when the following scene icons are displayed,
the camera will shoot continuously. If you press the shutter button halfway
when one of the icons in the table below is displayed, one of the following
icons will be displayed to inform you that the camera will shoot continuous
images: [ ], [ ], or [W].
:
Consecutivges ae captured, and the camera
analydetsuch as facial expressions to save
the etemined to be the best.
Smiling (including Babies)
Sleeping (including Babies)
Children
:
Beautifuhots of sleeping faces, created by
combining consecutive shots to reduce camera
shake and image noise. The AF assist beam will not
light up, the flash will not fire, and the shutter sound
will not be played.
W: So you don’t miss a photo opportunity of children
who move around, the camera will capture three
consecutive images for each shot.
• In some scenes, expected images may not be saved, and images
may not look as expected.
• Focus, image brightness, and color are determined by the first
shot.
• When you want to shoot single images only, press the <m> button, choose
[
] in the menu, and then choose [ ].
52
Shooting (Smart Auto)
Movies
Still Images
Image Stabilization Icons
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in
<A> mode.
Image stabilization for movies,
Image stabilization for still
images
reducing strong camera shake,
as when shooting while walking
(Dynamic IS)
Image stabilization for slow
camera shake, such as when
shooting movies at telephoto
(Powered IS)
Image stabilization for still
images, when panning*
No image stabilization, because
the camera is mounted on
a tripod or held still by other
means. However, some shooting
conditions will activate image
stabilization.
Image stabilization for macro
shots (Hybrid IS)
* Displayed when you pan, following g subjects with the camera. When you follow
subjects moving horizontal, image slization only counteracts vertical camera
shake, and horizontal stabilation stops. Similarly, when you follow subjects moving
vertically, image stabilization only counteracts horizontal camera shake.
an IS icon is not displayed.
53
Shooting (Smart Auto)
Still Images
Movies
On-Screen Frames
A variety of frames are displayed once the camera detects subjects you are
aiming the camera at.
•
A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white frame
will remain on the screen.
•
When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus and
image brightness are constantly adjusted (Servo AF).
frames are not displayed around desired subjects, or if frames are
displayed on the background or slar aas.
54
Common, Convenient Features
Still Images
Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 200x enlargement.
1
Move the zoom lever toward <i>.
zzHold the lever until zooming stops.
XXZooming stops at the largest possible
zoom factor (before the image becomes
noticeably grainy), which is then indicated
on the screen.
Zoom Factor
2 Move the zoom lever toward
<i> again.
XXThe camerzooms in even closer on the
subject.
• Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change
depending on the zoom range.
- White range: optical zoom range where the image will not appear grainy.
- Yellow range: digital zoom range where the image is not
noticeably grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution settings
• Focal length when optical and digital zoom are combined is as follows
(35mm film equivalent).
24 – 4800 mm (24 – 1200 mm with optical zoom alone)
• To deactivate digital zoom, press the <n> button, choose [Digital Zoom]
on the [4] tab, and then choose [Off].
55
Common, Convenient Features
Still Images
Still Images
Movies
Movies
Easier Telephoto Shooting
0
Reacquiring Subjects Lost After Zooming (Framing
Assist – Seek)
If you lose track of a subject while zooming in, you can find it more easily by
temporarily zooming out.
1 Look for the lost subject.
zzPress and hold the < > button.
XXThe camera zooms out and displays a
white frame around the area previously
shown (before you pressed the <
button).
>
2 Reacquire the subject.
zzAim the camera so that the subject in the
white frame, and then release the
<
> button.
XXThe previous magnification is now
restored, so that the area outlined in
white fills the screen again.
• Some shooting information is not displayed while the camera is
zoomed out.
• During movie shooting, the white frame is not displayed if you
press the < > button. Also note that camera operating sounds
such as zooming will be recorded.
56
Common, Convenient Features
• If you prefer to shoot at the zoom factor of the screen in step 1, press the
shutter button all the way down.
• You can adjust the zoom factor that the camera will revert to after Zoom
Framing Assist (when you release the < > button) by moving the zoom
lever as you hold the < > button to resize the white frame.
• To adjust how much the camera zooms out when the < > button is
pressed, press the <n> button and choose one of the three levels in
[
Display Area] on the [4] tab.
• The zoom factor cannot be changed with the < > button after you press
Still Images
0
Minimizing Camera Shake While Composing Shots
(Framing Assist – Lock)
Even at high magnification, you can reduce cmera shake while composing
shots as follows.
1 res the < > button.
] is displayed, and optimal image
stabilization is applied to the display as
you compose the shot.
2 Shoot.
zzWhile holding the < > button, press
the shutter button halfway to focus on
the subject, and then press it all the way
down.
57
Common, Convenient Features
• The zoom factor cannot be adjusted by pressing the < > button
• Changing the composition of the shot significantly or making other
adjustments may reduce the effectiveness of image stabilization.
In this case, [ ] will be shown in gray. If this occurs, release the
<
> button, compose the shot, and then press it again.
• Correct movie shooting is not possible if you start shooting a
movie while holding down the < > button, because the shot
composition may be changed as the level of image stabilization
changes.
• Although no image stabilization icon is shown while you are holding down
the < > button, optimal image stabilization will be applied when you press
the shutter button halfway.
• To fine-tune the size of subjects gradually, movthe zoom lever while
holding down the < > button.
Still Images
Movies
Using the Self-Time
With the self-timer, you can iclude yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
1 Configure the setting.
zzPress the <r> button, choose []] (either
press the <q><r> buttons or turn the
<5> dial), and then press the <m>
button.
XXOnce the setting is complete, []] is
displayed.
2 Shoot.
zzFor Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
zzFor Movies: Press the movie button.
58
Common, Convenient Features
XXOnce you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
XXTwo seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
zzTo cancel shooting after you have
triggered the self-timer, press the
<n> button.
zzTo restore the original setting, choose
[
] in step 1.
Still Images
Movies
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about wo seconds after you have
pressed the shutter button. If the camea is usteady while you are pressing
the shutter button, it will not affect yoot.
Cgure the setting.
[[].
XXOnce the setting is complete, [[] is
displayed.
Still Images
Movies
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1 Choose [$].
[$] and press the <n> button
immediately.
59
Common, Convenient Features
2 Configure the setting.
zzPress the <o><p> buttons to choose
[Delay] or [Shots].
zzPress the <q><r> buttons or turn the
<5> dial to choose a value, and then
press the <m> button.
XXOnce the setting is complete, [$] is
displayed.
• For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
• When you specify multiple shots, imaightnss and white balance are
determined by the first shot. More time equired between shots when the
flash fires or when you have sto ake many shots. Shooting will stop
automatically when the memorbecomes full.
• When a delay longer thn two seconds is specified, two seconds before the
shot, the lamp blinking ad sf-timer sound will speed up. (The lamp will
remain lit in case the flash fires.)
60
Common, Convenient Features
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
1 Configure the setting.
zzPress the <n> button, choose [Date
Stamp] on the [4] tab, and then choose
XXOnce the setting is complete, [DATE] is
displayed.
2 oot.
XXAs you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
zzTo restore the original setting, choose
[Off] in step 1.
• Date stamps cannot be edited or removed.
61
Common, Convenient Features
• Images originally recorded without the shooting date can be printed with this
information as follows. However, adding the date and time to images that
already have this information may cause it to be printed twice.
- Use the included software to print
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
1 Specify Tracking AF.
zzPress the <o> button.
XX[ ] is displayd in the center of the
screen
2 se a subject to focus on.
zzAie camera so that [ ] is on the
desired subject, and then press the
shutter button halfway.
XXA blue frame is displayed, and the
camera will keep the subject in focus and
image brightness adjusted (Servo AF).
3 Shoot.
zzPress the shutter button all the way down
to shoot.
zzPress the <o> button to cancel Tracking
AF.
• Tracking may not be possible when subjects are too small or move too
rapidly, or when subject color or brightness matches that of the background
too closely.
62
Using Face ID
If you register a person ahead of time, the camera will detect that person’s
face, and prioritize focus, brightness, and color for that person when
shooting. In <A> mode, the camera can detect babies and children
based on registered birthdays and optimize settings for them when
shooting.
This function is also useful when searching for a specific registered person
Personal Information
•
•
Information such as images of a face (face info) registered with Face ID,
and personal information (name, birthday) will be saved on the camera.
Additionally, when registered people are detected, their names will be
recorded in still images. When using the Face ID function, be careful
when sharing the camera or images with others, and when posting
images online where many others can view them.
When disposing of a camera or transferring it to another person after
using Face ID, be sure to erase all informaion (registered faces, names,
Registering Face ID Inrmation
You can register information (fao, name, birthday) for up to 12 people
to use with Face ID.
1 Access the setting screen.
zzPress the <n> button, choose [Face
ID Settings] on the [4] tab, and then
63
Using Face ID
zzChoose [Add to Registry], and then
choose [Add a New Face].
2 Register face information.
zzAim the cameso that the face of the
persowanto register is inside the
rae at the center of the screen.
zzframe on the person’s face
indicates that the face is recognized.
Make sure a white frame is displayed on
the face, and then shoot.
zzIf the face is not recognized, you cannot
register face information.
3 Save the settings.
zzAfter [Register?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [OK], and then press the <m>
button.
64
Using Face ID
XXThe [Edit Profile] screen is displayed.
4 Enter a name.
zzPress the <m> button.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose a character,
and then press the <m> button to enter
it.
zzChoose [ ] or [ ] and press the <m>
button to move the cursor.
zzTo te thprevious character, either
prehe <a> button or choose [ ] and
ss the <m> button.
ss the <n> button to return to the
edit profile screen.
5 Enter a birthday.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Birthday], and then
press the <m> button.
zzPress the <q><r> buttons to choose a
setting.
zzPress the <o><p> buttons or turn the
<5> dial to specify the date.
zzWhen finished, press the <m> button.
65
Using Face ID
6 Save the settings.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Save], and then
press the <m> button.
zzAfter a message is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [Yes], and then press the <m>
button.
7
Continue registering face information.
zzTo register up to 4 more points of face information
(expressions or angles), repeat steps 2 – 3.
zzRegistered faces are more easily
recognized if you add a variety of face
information. In addition to a head-on
angle, add a sght side angle, a shot when
smiling, nd sts inside and outside.
• The flash will not fire when instep 2.
• If you do not registea birthn step 5, Babies or Children icons
• You can overwrite registered face info, and add face info later if you have not
Shooting
If you register a person ahead of time, the camera will prioritize that person as the
main subject, and optimize focus, brightness, and color for that person when shooting.
XXWhen you point the camera toward a subject,
the names of up to 3 registered people will
be displayed when they are detected.
zzShoot.
XXDisplayed names will be recorded in still
images. Even if people are detected, but their
names are not displayed, the names (up to 5
people) will be recorded in the image.
66
Using Face ID
• People other than those registered may be mistakenly detected as
the registered person if they share similar facial features.
• Registered people may not be correctly detected if the captured image or
scene differs drastically from the registered face information.
• If a registered face is not detected, or not easily detected, overwrite
registered information with new face info. Registering face info right before
shooting will allow for easier detection of registered faces.
•
If a person is mistakenly detected as another person and you continue shooting,
• Because faces of babies and children change quickly as they grow, you
• Names will still be recorded in images even if you clear the [Shooting Info]
are not displayed.
• If you don’t want names to be recorded in ill images, choose [Face ID
Settings] on the [4] tab, choose [Fce IDand then choose [Off].
• You can check names recorded in es in he playback screen (simple
Checking and EditiRegistered Information
Checking Registered Face ID Information
1 Access the [Check/Edit Info]
screen.
[Check/Edit Info] and press the <m>
button.
2 Choose a person to check.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose a person,
and then press the <m> button.
67
Using Face ID
3 Check the registered
information.
zzPress the <o><p> buttons or turn the
<5> dial to choose an item, and then
press the <m> button.
zzCheck the registered information.
Changing the Name or Birthday
1 Access the [Edit Profile] screen.
choose [Edit Profile] and press the <m>
button.
2 Input anges.
zthe <o><p> buttons or turn the
<dial to choose an item, and follow
• Even if you change names in [Edit Profile], the names recorded in
previously shot images will remain the same.
• You can use the included software to edit registered names. Some
characters entered with the included software may not display on the
camera, but will be correctly recorded in images.
68
Using Face ID
Overwriting and Adding Face Information
You can overwrite existing face information with new face info. You should
update face information regularly, especially with babies and children, as
their faces change quickly as they grow.
You can also add face information when all 5 face info slots have not been filled.
1 Access the [Add Face Info]
screen.
choose [Add Face Info] and press the
<m> button.
2 Choose the name of the person
to overwrite.
zzPress the o><p><q><r> buttons or
tur<5dial to choose the name of
peon to overwrite, and then press the
m> button.
zzIf 4 or less face information slots are
add more face info.
3 Access the face info screen.
zzRead the message that displays, press
the <q><r> buttons or turn the <5>
dial to choose [OK], and then press the
<m> button.
XXThe face info screen is displayed.
4 Choose the face info to
overwrite.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose the face info
to overwrite, and then press the <m>
button.
69
Using Face ID
5 Register face information.
shoot, and then register the new face
information.
zzRegistered faces are more easily
recognized if you add a variety of face
information. In addition to a head-on
angle, add a slight side angle, a shot
when smiling, and shots inside and
outside.
• You cannot add face information if all 5 information slots are filled. Follow the
steps above to overwrite face information.
• You can follow the above steps to register new face info when there is at
least one slot open, however you cannot overwrite any face information.
Instead of overwriting face info, first erase uwnted existing info (see
Erasing Face Information
1 Acess the [Check/Edit Info]
screen.
[Check/Edit Info] and press the <m>
button.
2 Choose the name of the person
whose face info you want to
erase.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose the name of
the person whose face info you want to
erase, and then press the <m> button.
70
Using Face ID
3 Access the [Face Info List]
screen.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Face Info List], and
then press the <m> button.
4 Choose the face info to erase.
zzPress the <m> button, press the
<o><p><q><r> buttons or turn the <5>
dial to choose the face info you want to erase,
and then press the <m> button.
zzAfter [Erase?] is displayed, press the <q><r>
buttons or turn the <
[OK], and then press the <m> button.
> dial to choose
5
XXThe selectd face info will be erased.
Erasing Registered Infrmation
You can erase information (facname, birthday) registered to Face ID.
However, names recorded in previously shot images will not be erased.
1 Access the [Erase Info] screen.
[Erase Info].
2 Choose the name of the person
whose info you want to erase.
zzPress the <o><p><q><r> buttons or turn
the <5> dial to choose the name of a person
to erase, and then press the <m> button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [OK], and then press the <m>
button.
71
Image Customization Features
Still Images
Changing the Aspect Ratio
Change the image aspect ratio (ratio of width to height) as follows.
Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXOnce the setting is complete, the screen
aspect ratio will be updated.
zzTo restore the original setting, repeat this
process but choose [ ].
Used for display on widescreen HDTsimiladisplay devices.
Same aspect ratio as 35mm d fr printing images at 5 x 7-inch or
postcard sizes.
Native aspect ratio of te caera screen, also used for display on standard-
definition televisions or similar display devices, or for printing images at 3.5 x
5-inch or A-series sizes.
Square aspect ratio.
Aspect ratio commonly used for portraits.
73
Image Customization Features
Still Images
Changing Image Resolution (Size)
Choose from 4 levels of image resolution, as follows. For guidelines on
how many shots at each resolution setting can fit on a memory card, see
Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
zzTo restore the original setting, repeat this
process but choose [ ].
Guidelines for Choosing olution Based on Paper
Size (for 4:3 Images)
A2 (16.5 x 23.4 in.)
zz[ ]: For e-mailing images.
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
74
Image Customization Features
Still Images
Red-Eye Correction
Red-eye that occurs in the flash photography can be automatically
corrected as follows.
1 Access the [Built-in Flash
Settings] screen.
zzPress the <n> button, choose [Flash
Control] on the [4] tab, and then press
2 onfigure the setting.
oose [Red-Eye Corr.], and then
XXOnce the setting is complete, [R] is
displayed.
zzTo restore the original setting, repeat this
process but choose [Off].
• Red-eye correction may be applied to image areas other than
eyes (if the camera misinterprets red eye makeup as red pupils,
for example).
• You can also access the screen in step 2 by holding down the <h> button for
at least one second.
• You can also access the screen in step 2 when the flash is up by pressing
the <h> button and immediately pressing the <n> button.
75
Image Customization Features
Still Images
Correcting Greenish Image Areas from
Mercury Lamps
In shots of evening scenes with subjects illuminated by mercury lamps, the
subjects or background may appear to have a greenish tinge. This greenish
tinge can be corrected automatically when shooting, using Multi-area White
Balance.
Configure the setting.
zzPress the <n> button, choose [Hg
Lamp Corr.] on the [4] tab, and then
XXOnce the setting is complete, [ ] is
displayed.
zzTo restore the riginal setting, repeat this
process ut chose [Off].
• After you are finished shooting under mercury lamps, you should
set [Hg Lamp Corr.] back to [Off]. Otherwise, green hues not
caused by mercury lamps may be corrected by mistake.
• Try taking some test shots first to make sure you obtain the desired results.
76
Image Customization Features
Movies
Changing Movie Image Quality
3 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
zzTo restore the original setting, repeat this
process but choose [ ].
Image
Quality
Resolution
1920 x 1080*
Rate
24 fps
Details
For shooting in Full HD
For shooting in HD
1280 x 720
640 x 480
30 fps
30 fps
For shooting in standard
definition
* Fine Detail Movie Processing (This function quickly processes a large amount of
information, making it possible to recorder even finer details in movies.)
• In [ ] and [ ] modes, black bars displayed on the top and bottom edges
of the screen indicate image areas not recorded.
77
Image Customization Features
Movies
Movies
Sound Settings
Adjusting the Recording Volume
Although the recording level (volume) is automatically adjusted to reduce
distortion, you can set the level manually to suit the shooting scene.
1
Access the [Movie Audio] screen.
zzPress the <n> button, choose
[Movie Audio] on the [4] tab, and then
2 Configure the setting.
zzChoose [Mic Level], and then choose
zzPress p> utton, and then press
q>r> buttons to configure the
setting.
zzTo restore the original setting, repeat this
process but choose [Auto].
Movies
Using the Wind Filter
Distorted audio caused by recording when the wind is strong can be
reduced. However, the recording may sound unnatural when this option is
used when there is no wind.
Configure the setting.
zzAccess the [Movie Audio] screen as
described in step 1 of “Adjusting the
Recording Volume”.
zzChoose [Wind Filter], and then choose
zzTo restore the original setting, repeat this
process but choose [Off].
78
Helpful Shooting Features
Still Images
Movies
Using the Electronic Level
An electronic level can be displayed on the screen when shooting as a
guideline to determine if the camera is level.
1 Display the electronic level.
zzPress the <l> button several times
to display the electronic level.
2 evl the camera as needed.
el the camera so that the center of the
electronic level is green.
• If the electronic level is not displayed in step 1, press the <n> button,
and on the [4] tab, choose [Custom Display]. Add a [ ] to choose the
electronic level.
• Tilting the camera too far forward or backward will prevent you from using
the electronic level, which will turn gray.
• The electronic level is not displayed during movie recording.
• If you hold the camera vertically, the orientation of the electronic level will be
updated automatically to match the camera orientation.
• If your shots are not level even if you use the electronic level, try calibrating
79
Helpful Shooting Features
Still Images
Magnifying the Area in Focus
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
1 Configure the setting.
zzPress the <n> button, choose [AF-
Point Zoom] on the [4] tab, and then
2 ck he focus.
zzPhe shutter button halfway. The
face detected as the main subject is now
magnified.
zzTo restore the original setting, choose
[Off] in step 1.
• The area in focus will not be magnified when you press the shutter
button halfway if a face was not detected, if the person is too close
to the camera and their face is too large for the screen, or if the
camera detects subject movement.
80
Helpful Shooting Features
Checking for Closed Eyes
] is displayed when the camera detects that people may have closed
[
their eyes.
1 Configure the setting.
zzPress the <n> button, choose [Blink
Detection] on the [4] tab, and then
2 Shoot.
zz[ ] is displayed when the camera
detects a person whose eyes are closed.
zzTo restore the original setting, choose
[Off] in step 1.
• When you have specified shts in [$] mode, this function is only
available for the finl shot.
• This feature is not aailable during continuous shooting in [ ] mode
• A frame is displayed around people whose eyes are closed when you
have selected 2 – 10 seconds in [Review], or if you have selected [Hold]
81
Customizing Camera Operation
Customize shooting functions on the [4] tab of the menu as follows.
Still Images
Movies
Deactivating the AF Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
shooting in low-light conditions.
Configure the setting.
zzPress the <n> button, choose [AF-
assist Beam] on the [4] tab, and then
zzTo restore the original setting, repeat this
process but choose [On].
Still Images
Deactivating the Red-EyReduction Lamp
You can deactivate the red-eye ren lmp that lights up to reduce red-
eye when the flash is used in low-liots.
1 Access the [Built-in Flash
Settings] screen.
zzPress the <n> button, choose [Flash
Control] on the [4] tab, and then press
2 Configure the setting.
zzChoose [Red-Eye Lamp], and then
zzTo restore the original setting, repeat this
process but choose [On].
82
Customizing Camera Operation
Still Images
Changing the Image Display Period After Shots
Change how long images are displayed after shots as follows.
Configure the setting.
zzPress the <n> button, choose
[Review] on the [4] tab, and then
zzTo restore the original setting, repeat this
process but choose [Quick].
Displays images only until you can
shoot again.
Quick
Displays images for the specified
time. Even while the shot is
2 – 10 sec. displayed, you can take another
hot by pressing the shutter button
hlfway again.
Displays images until you press
d
the shutter button halfway.
Off
No image display after shots.
83
Customizing Camera Operation
Still Images
Changing the Image Display Style After Shots
Change the way images are displayed after shots as follows.
1 In [Review], choose either 2 – 10
2 Configure the setting.
zzPress the <n> button, choose
[Review Info] on the [4] tab, and then
zzTo restore the original setting, repeat this
process but choose [Off].
Off
Displays only the image.
isays shooting details
Detailed
Shows the area in the AF frame
magnified, enabling you to check
the focus. Follow the steps in
set to [Quick] or [Off].
84
Still Images
Movies
Auto Clip Recording (Movie Digest)
You can make a short movie of a day just by shooting still images.
Before each shot, the camera will automatically record a movie clip of the
scene. Each clip recorded that day is combined into a single file.
1 Enter < > mode.
zzSet the mode dial to < >.
2 Shoot.
zzTo shoot a still image, press the shutter
button all the way down.
XXBefore shooting, the camera will
automatically record a clip about 2 – 4
seconds long.
• Clips may not be recorded if you shoot a still image immediately
after turning the camera on, choosng < > mode, or operating the
camera in other ways.
• Battery life is shorter in thie tan in <A> mode, because
clips are recorded for each
• Any sounds from camera operations during movie recording will
be included in the moie.
• Although the clips recorded on a particular day are combined into a single
• Clips are saved as separate movie files in the following cases even if they
were recorded on the same day in < > mode.
- If the movie file size reaches about 4 GB or the total recording time reaches
approx. 29 minutes and 59 seconds
been changed
• Some camera sounds will be muted. Sounds are not played when you press
the shutter button halfway, use camera controls, or trigger the self-timer
86
Still Images
Moving Subjects (Sports)
Shoot continuously as the camera focuses on moving subjects.
1 Enter < > mode.
zzSet the mode dial to < >.
2 Focus.
zzWhile you are pressing the shutter button
halfway, the camera will continue to
adjust focus and image brightness where
the blue frame is displayed.
3 Shoot.
zzHold the shutter button all the way down
to shoot ctinuously.
zzShg stos when you release the
uttr button or reach the maximum
mber of shots, after which [Busy] is
displayed and the shots are shown in the
order you took them.
increased to suit the shooting conditions.
• There may be a delay after continuous shooting before you can shoot again.
Note that some types of memory cards may delay your next shot even
longer.
• Shooting may slow down depending on shooting conditions, camera settings,
and the zoom position.
87
Moving Subjects (Sports)
Images Displayed During Playback
Each set of images shot continuously is managed as a single group, and
only the first image in that group will be displayed. To indicate that the
image is part of a group, [
] is displayed in the upper left of the screen.
are also erased. Be careful when erasing images.
• Grouped images can be viewed individually when played back using Image
temporarily ungrouped.
88
Specific Scenes
Choose a mode matching the shooting scene, and the camera will
automatically configure the settings for optimal shots.
1 Enter <K> mode.
zzSet the mode dial to <K>.
2 Choose a shooting mode.
zzPress the <m> button, choose [I] in the
menu, and then choose a shooting mode
3 Shoot.
till Images
Movies
ISt potraits (Portrait)
ke hots of people with a softening
ct.
Still Images
Shoot evening scenes without
using a tripod (Handheld
NightScene)
zzBeautiful shots of evening scenes or
portraits with evening scenery in the
background, without the need to hold the
camera very still (as with a tripod).
zzA single image is created by combining
consecutive shots, reducing camera
shake and image noise.
89
Specific Scenes
Still Images
Movies
PShoot with snowy backgrounds
(Snow)
zzBright, natural-colored shots of people
against snowy backgrounds.
Still Images
Movies
tShoot fireworks (Fireworks)
zzVivid shots of fireworks.
• In [ ] mode, shots may look grabecase the ISO speed
• Subjects appear larger in odcompared to other modes.
• Because the camerwill shontinuously in [ ] mode, hold it
steady while shootin.
• In [ ] mode, excessive camera shake or certain shooting
conditions may prevent you from obtaining the desired results.
• In [t] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
• When you use a tripod for evening scenes, shooting in [A] mode instead
90
Specific Scenes
Still Images
Making Skin Look Smoother (Smooth Skin)
You can apply a smoothening effect when shooting images of people.
The effect level and color ([Lighter Skin Tone], [Darker Skin Tone]) can be
chosen as follows.
1 Choose [ ].
choose [ ].
2 Access the setting screen.
zzPress the <l> button.
3 Configure the setting.
zzPress the o><p> buttons to choose
an optionhoose an effect level (either
pree <q><r> buttons or turn the
5dial), and then press the <l>
ton.
zzpreview is shown of how your shot will
look with the effect applied.
4 Shoot.
• Areas other than people’s skin may be modified.
• Try taking some test shots first to make sure you obtain the
desired results.
• The effect will be stronger for the face of the person detected as the main
subject.
91
Image Effects (Creative Filters)
Add a variety of effects to images when shooting.
1 Enter < > mode.
zzSet the mode dial to < >.
2 Choose a shooting mode.
zzPress the <m> button, choose [ ] in
the menu, and then choose a shooting
3 Shoot.
Still mages
Movies
Shoon vivid colors (Super
d)
zzShs in rich, vivid colors.
Still Images
Movies
Posterized shots (Poster Effect)
zzShots that resemble an old poster or
illustration.
• In [ ] and [ ] modes, try taking some test shots first, to make
sure you obtain the desired results.
92
Image Effects (Creative Filters)
Still Images
Shooting High-Contrast Scenes (High Dynamic Range)
Three consecutive images are captured at different brightness levels each time
you shoot, and the camera combines image areas with optimal brightness to
create a single image. This mode can reduce the washed-out highlights and
loss of detail in shadows that tends to occur in high-contrast shots.
1 Choose [ ].
choose [ ].
2 Hold the camera still.
zzMount the camera on a tripod or take
other measures to keep it still and
prevent camera shake.
3 Sh.
heyou press the shutter button all
way down, the camera will take three
ots and combine them.
• Any subject movement will cause images to look blurry.
• There will be a delay before you can shoot again, as the camera processes
and combines the images.
Adding Color Effects
choose [ ].
zzPress the <l> button, choose a color
effect (either press the <q><r> buttons
or turn the <5> dial), and then press the
<l> button again.
93
Image Effects (Creative Filters)
Effect Off
Sepia
―
Sepia tone shots.
B/W
Black and white shots.
Shots in rich, vivid colors.
Shots that resemble an old poster or illustration.
Super Vivid
Poster Effect
Still Images
Shooting with a Fish-Eye Lens Effect
(Fish-eye Effect)
Shoot with the distorting effect of a fish-eye lens.
1 Choose [ .
choos].
2 se an effect level.
zzPres the <l> button, choose an
effect level (either press the <q><r>
buttons or turn the <5> dial), and then
press the <l> button again.
XXA preview is shown of how your shot will
look with the effect applied.
3 Shoot.
• Try taking some test shots first, to make sure you obtain the
desired results.
94
Image Effects (Creative Filters)
Still Images
Shots Resembling Miniature Models
(Miniature Effect)
Movies
Creates the effect of a miniature model, by blurring image areas above and
below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and
objects in the scene will move quickly during playback. Note that sound is
not recorded.
1 Choose [ ].
choose [ ].
XXA white frame is displayed, indicating the
image area that will not be blurred.
2 Chse the area to keep in
cus.
ss the <l> button.
zzMove the zoom lever to resize the frame,
and press the <o><p> buttons to move
it.
3 For movies, choose the movie
playback speed.
zzPress the <n> button, and then
choose the speed by pressing the
<q><r> buttons or turning the <5>
dial.
4 Return to the shooting screen
and shoot.
zzPress the <n> button to return to the
shooting screen, and then shoot.
95
Image Effects (Creative Filters)
Playback Speed and Estimated Playback Time (for One-
Minute Clips)
Speed
Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
• The zoom is not available when shooting movies. Be sure to set
the zoom before shooting.
• Try taking some test shots first, to make sure you obtain the
desired results.
• To switch the orientation of the frame (from horontal to vertical or vice-
versa), press the <m> button in step 2. You move the frame in vertical
orientation by pressing the <q><r> s.
• Movie image quality is [ ] at pecatio of [ ] and [ ] at an aspect
• The zoom factor cannobe chanwith the < > button on the screens in
steps 2 and 3, or while sootig movies.
Still Images
Shooting with a Toy Camera Effect
(Toy Camera Effect)
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
1 Choose [ ].
choose [ ].
96
Image Effects (Creative Filters)
2 Choose a color tone.
zzPress the <l> button, choose a color
tone (either press the <q><r> buttons or
turn the <5> dial), and then press the
<l> button again.
XXA preview is shown of how your shot will
look with the effect applied.
3 Shoot.
Standard Shots resemble toy camera images.
Warm
Cool
Images have a warmer tone than with [Standard].
Images have a cooler tone than with [Standard].
• Try taking some test shots first, to make sure you obtain the
desired results.
Still Images
Shooting With a SFocus Effect
This function allows you tshoot images as if a soft focus filter is attached
to the camera. You can adjust the effect level as desired.
1 Choose [ ].
choose [ ].
2 Choose an effect level.
zzPress the <l> button, choose an
effect level (either press the <q><r>
buttons or turn the <5> dial), and then
press the <l> button again.
XXA preview is shown of how your shot will
look with the effect applied.
3 Shoot.
97
Image Effects (Creative Filters)
• Try taking some test shots first, to make sure you obtain the
desired results.
Still Images
Movies
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
1 Choose [ ].
choose [ ].
2 Choose a color tone.
zzPress the <l> button, choose a color
tone (either prss the <q><r> buttons or
turn the <5> ial), and then press the
<ltton gain.
Xvieis shown of how your shot will
th the effect applied.
3 Shoot.
B/W
Black and white shots.
Sepia
Blue
Sepia tone shots.
Blue and white shots.
Still Images
Movies
Shooting with Color Accent
Choose a single image color to keep and change other colors to black and
white.
1 Choose [T].
choose [T].
98
Image Effects (Creative Filters)
2 Access the setting screen.
zzPress the <l> button.
XXThe original image and the Color Accent
image are displayed one after another.
XXBy default, green is the color that will be
kept.
3 Specify the color.
zzPosition the center frame over the color
to keep, and then press the <q> button.
XXThe specified color is recorded.
4 Specify the range of colors to
keep.
Recorded Color
zzPress the <o><p> buttons or turn the
<5> dil adjust the range.
zzTo only your specified color, choose
lare negative value. To keep colors
ilato your specified color as well,
oose a large positive value.
zzPress the <l> button to return to the
shooting screen.
5 Shoot.
• Using the flash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.
99
Image Effects (Creative Filters)
Still Images
Movies
Shooting with Color Swap
You can replace one image color with another before shooting. Note that
only one color can be replaced.
1 Choose [Y].
choose [Y].
2 Access the setting screen.
zzPress the <l> button.
XXThe original image and the Color Swap
image are displayed one after another.
XXBy default, green will be replaced with
gray.
3 Speche color to replace.
zn the center frame over the color
tace, and then press the <q>
button.
XXThe specified color is recorded.
4 Specify the new color.
zzPosition the center frame over the new
color, and then press the <r> button.
XXThe specified color is recorded.
100
Image Effects (Creative Filters)
5 Specify the range of colors to
replace.
zzPress the <o><p> buttons or turn the
<5> dial to adjust the range.
zzTo replace only your specified color,
choose a large negative value. To replace
colors similar to your specified color as
well, choose a large positive value.
zzPress the <l> button to return to the
shooting screen.
6 Shoot.
• Using the flash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.
101
Special Modes for Other Purposes
Still Images
Auto Shooting After Face Detection
(Smart Shutter)
Auto Shooting After Smile Detection
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
1 Choose [ ].
choose [ ], and then press the <l>
button.
zzPress the <q><r> buttons or turn the
<5> dial to choose [ ], and then press
the <l> btton.
XXThe camera nw enters shooting standby
mode, [SmilDetection on] is
ye.
2 Athe camera at a person.
zzEach time the camera detects a smile, it
will shoot after the lamp lights up.
zzTo pause smile detection, press the <r>
button. Press the <r> button again to
resume detection.
• Switch to another mode when you finish shooting, or the camera
will continue shooting each time a smile is detected.
• You can also shoot as usual by pressing the shutter button.
• The camera can detect smiles more easily when subjects face the camera
and open their mouth wide enough so that teeth are visible.
• To change the number of shots, press the <o><p> buttons after choosing
[
• Automatic shooting is not available while you are holding down the <
>
button.
102
Special Modes for Other Purposes
Still Images
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1 Choose [ ].
choose [ ], and then press the <l>
button.
zzPress the <q><r> buttons or turn the
<5> dial to choose [ ], and then press
the <l> button.
2 Compose the shot and press
the shuter button halfway.
zzMaure green frame is displayed
arothe face of the person who will
nk.
3 Press the shutter button all the
way down.
XXThe camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
XXThe lamp blinks and the self-timer sound
is played.
4 Face the camera and wink.
XXThe camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
zzTo cancel shooting after you have
triggered the self-timer, press the
<n> button.
103
Special Modes for Other Purposes
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
• Closing and opening both eyes at once will also be detected as a wink.
• If winking is not detected, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[
• If no one is in the shooting area when the shutter button is pressed all the
way down, the camera will shoot after a person enters the shooting area and
winks.
• The zoom factor cannot be changed with the < > button after you press
the shutter button all the way down.
Still Images
Using the Face Self-Timer
The camera will shoot about two seconds after dtecting that the face of
another person (such as the photographer) has tered the shooting area
shots.
1 Choose [ ].
choose [ ], and then press the <l>
button.
zzPress the <q><r> buttons or turn the
<5> dial to choose [ ], and then press
the <l> button.
2 Compose the shot and press
the shutter button halfway.
zzMake sure a green frame is displayed
around the face you focus on and white
frames around other faces.
104
Special Modes for Other Purposes
3 Press the shutter button all the
way down.
XXThe camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
XXThe lamp blinks and the self-timer sound
is played.
4 Join the subjects in the
shooting area and look at the
camera.
XXAfter the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain it.) About two seconds later,
the camewill shoot.
zzTo el shoting after you have
gged the self-timer, press the
n> button.
• Even if your face is nt dected after you join the others in the shooting
area, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[
• The zoom factor cannot be changed with the < > button after you press
the shutter button all the way down.
105
Special Modes for Other Purposes
Still Images
High-Speed Continuous Shooting
(High-speed Burst HQ)
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
HQ: High Quality
1 Choose [ ].
choose [ ].
2 Shoot.
XXHold the shutter button all the way down
to shoot continuously.
zzShootinstops when you release the
shutter on or reach the maximum
er f shots, after which [Busy] is
ded and the shots are shown in the
order you took them.
zzEach set of images shot continuously is
managed as a single group, and only the
first image in that group will be displayed
• Focus, image brightness, and color are determined by the first shot.
• The screen is blank while you are shooting.
• There may be a delay after continuous shooting before you can shoot again.
Note that some types of memory cards may delay your next shot even
longer.
• Shooting may slow down depending on shooting conditions, camera settings,
and the zoom position.
106
Special Modes for Other Purposes
Still Images
Shooting Stitch Assist Images
Shoot a large subject by taking multiple shots at various positions, and then
1 Choose [x] or [v].
choose [x] or [v].
2 Take the first shot.
XXThe first shot will determine the exposure
and white balance.
3 Tadditional shots.
mpse the second shot so that it partially
rlaps the image area of the first shot.
zzMinor misalignment of overlapping
portions will be corrected automatically
when the images are combined.
zzYou can take up to 26 shots, the same
way you took the second shot.
4 Finish shooting.
zzPress the <m> button.
5 Use the software to combine the
images.
zzFor instructions on merging images, refer
• To use AF lock, assign [%] to the <
107
Movies
Movies
Shooting Various Movies
Shooting Movies in <E> Mode
1 Enter <E> mode.
zzSet the mode dial to <E>.
XXBlack bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
2 Configure the settings to suit
3 Shoot.
zzPress the movie button.
zzTo stop movie ecording, press the movie
button again.
Still Images
Movies
Shooting Still Images DuriMovie Recording
Shoot still images during moe reording as follows.
1 While shooting a movie, focus
on a subject.
zzMake sure that [4] is displayed, and
then press the shutter button halfway.
XXFocus and exposure are now readjusted.
(However, the camera does not beep.)
XXMovie recording will continue.
2 Shoot.
zzPress the shutter button all the way
down.
XXYour shot will be recorded.
108
Shooting Various Movies
• Shooting still images during movie recording may not be possible
when recording at slow speeds to memory cards, or when there is
not enough free internal memory.
- [4] (blinking): Image processing for recording is in progress. You
can shoot when the icon stops blinking.
- [ ]: Still images cannot be shot. In [ ] and [ ] modes, [
]
is displayed during movie recording, and still images cannot be
shot.
• When still images are shot during movie recording, a black screen
and shutter sound will be included in the movie.
• The flash does not fire.
images.
• Movie recording may stop if shooting still images fills up the
internal memory.
• During recording of [ ] ooves (with at aspect ratio of 16:9), still
images will have aaspect f [ ].
• During recording of ] movies (with at aspect ratio of 4:3), still images will
have an aspect ratio of [ ].
• [ ] images are shot when movie and still image aspect ratios do not match.
• During movie recording, an area wider than the area shown on the screen is
• The ISO speed will be [ ].
109
Shooting Various Movies
Movies
Locking or Changing Image Brightness Before Shooting
Before shooting, you can lock the exposure or change it in 1/3-stop
increments within a range of –3 to +3.
1 Lock the exposure.
zzPress the <o> button to lock the exposure.
The exposure shift bar is displayed.
zzTo unlock the exposure, press the <o>
button again.
2 Adjust the exposure.
zzTurn the <5> dial to adjust the
exposure, as you watch the screen.
Movies
Shooting iFrame Mo
Shoot movies that can be edted with iFrame-compatible software or
devices. You can quickly edit, save, and manage iFrame movies using the
1 Choose [ ].
zzSet the mode dial to <E>.
zzPress the <m> button, choose [E]
in the menu, and then choose [
]
XXBlack bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
• iFrame is a video format developed by Apple.
110
Shooting Various Movies
Movies
Shooting Super Slow Motion Movies
You can shoot fast-moving subjects for playback later in slow motion. Note
that sound is not recorded.
1 Choose [ ].
zzSet the mode dial to <E>.
zzPress the <m> button, choose [E]
in the menu, and then choose [
]
2 Choose a frame rate.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired frame
XXThe tion ou configured is now
dised.
XXA bar showing the elapsed time is
displayed. Maximum clip length is approx.
30 sec.
Playback Time
Image Quality
Frame Rate
(For a 30-sec. Clip)
Approx. 4 min.
Approx. 2 min.
240 fps
120 fps
(320 x 240)
(640 x 480)
• Zooming is not available during recording, even if you move the
zoom lever.
• Focus, exposure, and color are determined when you press the
movie button.
111
Still Images
Movies
Shooting in Program AE Mode (<P> Mode)
You can customize many function settings to suit your preferred shooting
style.
1 Enter <G> mode.
zzSet the mode dial to <G>.
2 Customize the settings as
then shoot.
• If adequate exposure cannot be obtained when you press the shutter button
halfway, shutter speeds and aperture values are displayed in orange. To
obtain adequate exposure, try adjusting the following settings.
• Movies can be recorded in <G> modell, bpressing the movie button.
However, some <H> and <nettings may be automatically
adjusted for movie recording.
114
Image Brightness (Exposure Compensation)
Still Images
Adjusting Image Brightness (Exposure Compensation)
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –3 to +3.
zzPress the <o> button. As you watch the
screen, press the <q><r> buttons or
turn the <5> dial to adjust brightness,
and then press the <o> button again
when finished.
XXThe correction level you specified is now
displayed.
Still Images
Locking Image Brightness/Exposure (AE Lock)
Before shooting, you can lock the expre, oyou can specify focus and
exposure separately.
1 ck the exposure.
zzAim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<o> button.
XX[ ] is displayed, and the exposure is
locked.
zzTo unlock AE, release the shutter button
and press the <o> button again. In this
case, [ ] is no longer displayed.
2 Compose the shot and shoot.
zzAfter one shot, AE is unlocked and [ ] is
no longer displayed.
• AE: Auto Exposure
• After the exposure is locked, you can adjust the combination of shutter
speed and aperture value by turning the <5> dial (Program Shift).
115
Image Brightness (Exposure Compensation)
Still Images
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
For typical shooting conditions, including backlit shots.
Evaluative
Automatically adjusts exposure to match the shooting conditions.
Center
Determines the average brightnesof ght across the entire image area,
Weighted Avg. calculated by treating brightn the entral area as more important.
Metering restricted thin he [ ] (Spot AE Point frame). You
Spot
can also link the SPoit frame to the AF frame (see below).
Still Images
Linking the Spot AE Point Frame to the AF Frame
1 Set the metering method to [ ].
zzFollow the steps above to choose [ ].
2 Configure the setting.
zzPress the <n> button, choose
[Spot AE Point] on the [4] tab, and then
XXThe Spot AE Point frame will now be
linked to the movement of the AF frame
116
Image Brightness (Exposure Compensation)
Still Images
Changing the ISO Speed
zzPress the <p> button, choose an option
(either press the <q><r> buttons or turn
the <5> dial), and then press the <m>
button.
XXThe option you configured is now
displayed.
Automatically adjusts the ISO speed to suit the
shooting mode and conditions.
For shooting outdoors in fair weather.
Low
For shooting in cloudy conditions, or at
twilight
High
shoing night scenes, or in dark
ms.
• To view the automically sespeed when the camera is set to [ ],
press the shutter buon hlfway.
• Although choosing a lower ISO speed may reduce image graininess, there
may be a greater risk of subject blurriness in some shooting conditions.
• Choosing a higher ISO speed will increase shutter speed, which may reduce
subject blurriness and increase the flash range. However, shots may look
grainy.
• To specify [ ], press the <l> button on the setting screen.
117
Image Brightness (Exposure Compensation)
Still Images
Adjusting the
Setting
When the camera is set to [ ], maximum ISO speed can be specified in
a range of [ ] – [ ], and sensitivity can be specified in a range of three
levels.
1 Access the setting screen.
zzPress the <n> button, choose [ISO
Auto Settings] on the [4] tab, and then
2 Configure the setting.
zzChoose a menu item to configure, and
• You can also access th[ISO Auttings] screen when the ISO speed
Changing the Noise Reduction Level (High ISO NR)
You can choose from 3 levels of noise reduction: [Standard], [High], [Low].
This function is especially effective when shooting at high ISO speeds.
Choose a noise reduction level.
zzPress the <n> button, choose [High
ISO NR] on the [4] tab, and then choose
118
Image Brightness (Exposure Compensation)
Still Images
Auto Exposure Bracketing (AEB Mode)
Three consecutive images are captured at different exposure levels
(standard exposure, underexposure, and then overexposure) each time
you shoot. You can adjust the amount of underexposure and overexposure
(relative to standard exposure) from –2 to +2 stops in 1/3-stop increments.
1 Choose [ ].
zzPress the <m> button, choose
[
] in the menu, and then choose [
]
2 Configure the setting.
zzPrehe <l> button, and then
adjhe setting by pressing the
><r> buttons or turning the <5>
.
that function is treated as the standard exposure level for this function.
• You can also access the setting screen of step 2 by pressing the <l>
shot.
119
Image Brightness (Exposure Compensation)
Still Images
Correcting Image Brightness (i-Contrast)
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness.
To avoid washed-out highlights, specify Dynamic Range Correction. To
preserve image detail in shadows, specify Shadow Correct.
• Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
Still Images
Dynamic Range Correction (DR Corection)
Tone down bright image areas, which mitherwse look washed out, as
follows.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
(
XXOnce the setting is complete, [@] is
displayed.
Available ISO Speed
Item
Details
―
Automatic adjustment to prevent washed-out
highlights
[
[
[
], [ ] – [
], [ ] – [
], [ ] – [
]
]
]
Tone down highlights by about 200% relative
to the brightness level of [ ].
Tone down highlights by about 400% relative
to the brightness level of [ ].
120
Image Brightness (Exposure Compensation)
supported range if you have specified a value outside the
supported range indicated here.
Still Images
Shadow Correct
Automatically preserve image detail in shadows as follows.
zzPress the <m> button, choose [ ] in
the menu, press the <l> button, and
XXOnce the setting is complete, [@] is
displayed.
121
Color and Continuous Shooting
Still Images
Movies
Adjusting White Balance
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
Automatically sets the optimal white balance for the shooting
conditions.
Auto
Day Light
Cloudy
For shooting outdoors in fair eher.
For shooting in cloudy ions, n the shade, or at twilight.
For shooting uninay incandescent (tungsten) lighting
and simiarly colorescent lighting.
Tungsten
For shoong uder warm-white (or similarly colored) or cool-
white fluorescent lighting.
Fluorescent
Fluorescent H
For shooting under daylight fluorescent and similarly colored
fluorescent lighting.
Flash
For shooting with the flash.
h
Custom
122
Color and Continuous Shooting
Still Images
Movies
Custom White Balance
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
[
] or [ ].
zzAim the camera at a plain white subject,
so that the entire screen is white. Press
the <n> button.
XXThe tint of the screen changes once the
white balance data has been recorded.
• Colors may look unnatural if you chage camera settings after
recording white balance data.
123
Color and Continuous Shooting
Still Images
Movies
Manually Correcting White Balance
You can correct white balance. This adjustment can match the effect of
using a commercially available color temperature conversion filter or color-
compensating filter.
Configure the setting.
[
].
zzPress the <l> button, and then press
the <o><p><q><r> buttons to adjust
the correction level.
zzTo reset the correction level, press the
<n> button.
zzPress the <l> button to complete the
setting.
• The camera will retain whnce correction levels even if
you switch to anothr white nce option (by following steps on
white balance data.
• B: blue; A: amber; M: magenta; G: green
• One level of blue/amber correction is equivalent to about 7 mireds on a color
temperature conversion filter. (Mired: Color temperature unit representing
color temperature conversion filter density)
124
Color and Continuous Shooting
Still Images
Movies
Changing Image Color Tones (My Colors)
Change image color tones as desired, such as converting images to sepia
or black and white.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
My Colors Off
Vivid
―
Emphasizes contrast ad color saturation, making images
sharper.
Tones down cst and color saturation for subdued
images
Neutral
Sepia
Createtone images.
B/W
reats black and white images.
Combines the effects of Vivid Blue, Vivid Green, and
Vivid Red to produce intense yet natural-looking colors
resembling images on positive film.
Positive Film
Lighter Skin Tone
Darker Skin Tone
Lightens skin tones.
Darkens skin tones.
Emphasizes blues in images. Makes the sky, ocean, and
other blue subjects more vivid.
Vivid Blue
Emphasizes greens in images. Makes mountains, foliage,
and other green subjects more vivid.
Vivid Green
Vivid Red
Emphasizes reds in images. Makes red subjects more
vivid.
Adjust contrast, sharpness, color saturation, and other
Custom Color
125
Color and Continuous Shooting
• With [ ] and [ ] modes, colors other than people’s skin tone
may be modified. These settings may not produce the expected
results with some skin tones.
Still Images
Movies
Custom Color
Choose the desired level of image contrast, sharpness, color saturation,
red, green, blue, and skin tones in a range of 1 – 5.
1 Access the setting screen.
[
], and then press the <l> button.
2 Configure the setting.
zzPress o>p> buttons to choose
ptioand then specify the value by
ng he <q><r> buttons or turning
th5> dial.
zzFor stronger/more intense effects (or
darker skin tones), adjust the value to
the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to
the left.
zzPress the <l> button to complete the
setting.
126
Color and Continuous Shooting
Still Images
Continuous Shooting
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Specifications”
1 Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
2 Shoot.
XXHold the shutter button all the way down
to shoot cotinuously.
Mode
Descption
Continuous s, wh the focus and exposure determined
when ou preshutter button halfway.
Continuous
W
Continuous
Shooting AF
Continous sooting and focusing.
[AF Frame] is set to [Center] and cannot be changed.
Continuous shooting, with the focus fixed at the position
determined in manual focusing. In [t] mode, focus is determined
by the first shot.
Continuous
Shooting LV*
changed to [ ].
* For details on the continuous shooting speed in each mode, see “Specifications”
• Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
• As more shots are taken, shooting may slow down.
• Shooting may slow down if the flash fires.
127
Shooting Range and Focusing
Still Images
Shooting Close-ups (Macro)
To restrict the focus to subjects at close range, set the camera to [e]. For
zzPress the <q> button, choose [e] (either
press the <q><r> buttons or turn the
<5> dial), and then press the <m>
button.
XXOnce the setting is complete, [e] is
displayed.
• If the flash fires, vignetting may occur.
• Be careful to avoid damaging the len.
• In the yellow bar display area below e zoom bar, [e] will turn
gray and the camera will not .
• To prevent camera hake, nting the camera on a tripod and shooting
129
Shooting Range and Focusing
Still Images
Movies
Shooting in Manual Focus Mode
When focusing is not possible in AF mode, use manual focus. You can
specify the general focal position and then press the shutter button halfway
to have the camera determine the optimal focal position near the position
you specified. For details on the focusing range, see “Specifications”
1 Choose [ ].
zzPress the <q> button, choose [
]
(either press the <q><r> buttons or turn
the <5> dial), and then press the <m>
button.
XX[ ] and the MF indicator are displayed.
2 Focus.
zzReferrio the on-screen MF indicator
hich shows the distance and focal
pn) and the magnified display area,
press the <o><p> buttons or turn the
<5> dial to specify the general focal
position.
MF Indicator
3 Fine-tune the focus.
zzPress the shutter button halfway to have
the camera fine-tune the focal position
(Safety MF).
zzYou can also fine-tune the focus by
pressing the < > button.
130
Shooting Range and Focusing
• AF frame mode or size cannot be changed while focusing
size, cancel manual focus mode first.
• To focus more accurately, try attaching the camera to a tripod to stabilize it.
• To hide the magnified display area, press the <n> button and set [MF-
• To deactivate automatic focus fine-tuning when the shutter button is pressed
halfway, press the <n> button and set [Safety MF] on the [4] tab to
131
Shooting Range and Focusing
Still Images
Movies
Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.5x or 2.0x.
This can reduce camera shake because the shutter speed is faster than it
would be if you zoomed (including using digital zoom) in to the same zoom
factor.
zzPress the <n> button, choose
[Digital Zoom] on the [4] tab, and then
XXThe view is enlarged and the zoom factor
is displayed on the screen.
• The digital tele-converter cannot be usewith digital zoom
• The respective focal lengths wng [1.5x] and [2.0x] are 36 – 1800 mm
and 48 – 2400 mm (35m film eqalent).
• The shutter speed may beqivalent when you move the zoom lever all the
way toward <i> for maximum telephoto, and when you zoom in to enlarge
132
Shooting Range and Focusing
Still Images
Movies
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as follows.
zzPress the <n> button, choose [AF
Frame] on the [4] tab, and then choose
Still Images
Movies
Face Detect
•
•
Detects people’s faces, and then sets the fcus, exposure (evaluative
metering only), and white balance ] onl.
After you aim the camera at tubt, a white frame is displayed around
the person’s face determinee cmera to be the main subject, and
up to two gray frames are disd around other detected faces.
•
•
When the camera detets movement, frames will follow moving subjects,
within a certain range.
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
• If faces are not detected, or when only gray frames are displayed
(without a white frame), an AF frame is displayed in the center of
the screen when you press the shutter button halfway.
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
• Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in profile, at an angle, or partly hidden
• The camera may misinterpret non-human subjects as faces.
• No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
133
Shooting Range and Focusing
Still Images
FlexiZone/Center
One AF frame is displayed. Effective for reliable focusing.
• A yellow AF frame is displayed with [ ] if the camera cannot
focus when you press the shutter button halfway. Note that AF-
• To compose shots so that subjects are positioned at the edge or in a corner,
first aim the camera to capture the subject in an AF frame, and then hold
the shutter button halfway down. As you continue to hold the shutter button
halfway, recompose the shot as desired, and then press the shutter button all
the way down (Focus Lock).
134
Shooting Range and Focusing
Still Images
Moving and Resizing AF Frames (FlexiZone)
When you want to change the position or size of the AF frame, set the AF
1 Prepare to move the AF frame.
zzPress the < > button. The AF frame
turns orange.
2 Move and resize the AF frame.
zzTurn the <5> dial to move the AF frame,
or press the <o><p><q><r> buttons
to move it by a smaller amount.
zzTo return the AF frame to the original
position in he center, keep the <
>
button heldown.
zzTo ce thAF frame size, press the
l> button. Press it again to restore
the original size.
3 Finish the setup process.
zzPress the < > button.
• AF frames are displayed at normal size when you use the digital
135
Shooting Range and Focusing
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
1 Choose [Tracking AF].
[Tracking AF].
XX[ ] is displayed in the center of the
screen.
2 Choose a subject to focus on.
zzAim the camera so that [ ] is on the
desired subject, and then press the
<
> button.
Xthsubject is detected, the camera
band [ ] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
XXIf no subject is detected, [ ] is displayed.
zzTo cancel tracking, press the < > button
again.
3 Shoot.
zzPress the shutter button halfway.
[
] changes to a blue [ ], which
follows the subject as the camera
continues to adjust the focus and
zzPress the shutter button all the way down
to shoot.
XXEven after your shot, [ ] is still
displayed and the camera continues to
track the subject.
136
Shooting Range and Focusing
• [Servo AF] (see below) is set to [On] and cannot be changed.
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
• [AF-Point Zoom] on the [4] tab is not available.
• [e] is not available.
• The camera can detect subjects even if you press the shutter button halfway
without pressing the <
center of the screen.
> button. After your shot, [ ] is displayed in the
Still Images
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfwa
1 onfigure the setting.
ss the <n> button, choose
[Servo AF] on the [4] tab, and then
2 Focus.
zzThe focus and exposure are maintained
where the blue AF frame is displayed while
you are pressing the shutter button halfway.
• Focusing may not be possible in some shooting conditions.
• In low-light conditions, Servo AF may not be activated (AF frames may
not turn blue) when you press the shutter button halfway. In this case, the
focus and exposure are set according to the specified AF frame mode.
• If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter
button, and then press it halfway again.
• AF lock shooting is not available.
• [AF-Point Zoom] on the [4] tab is not available.
137
Shooting Range and Focusing
Still Images
Changing the Focus Setting
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed. Instead,
you can limit camera focusing to the moment you press the shutter button
halfway.
zzPress the <n> button, choose
[Continuous AF] on the [4] tab, and then
Helps avoid missing sudden photo
opportunities, because the camera
constantly focuses on subjects until you
On
press the shutter button halfway.
Conserves battery power, because the
Off
camera onot focus constantly.
138
Shooting Range and Focusing
Still Images
Choosing a Person to Focus On (Face Select)
You can shoot after choosing a specific person’s face to focus on.
1 Set the AF frame to [Face
2 Enter Face Select mode.
zzAim the camera at the person’s face and
press the < > button.
XXAfter [Face Select : On] is displayed, a
face frame [ ] is displayed around the
face detected as the main subject.
zzEven if the subject moves, the face frame
[
] followthe subject within a certain
range.
zzIf a is nt detected, [ ] is not
splyed.
3 hoose the face to focus on.
zzTo switch the face frame [ ] to another
detected face, press the < > button.
zzAfter you have switched the face frame
to all detected faces, [Face Select : Off]
is displayed, and the specified AF frame
mode screen is displayed again.
4 Shoot.
zzPress the shutter button halfway. After the
camera focuses, [ ] changes to [ ].
zzPress the shutter button all the way down
to shoot.
139
Shooting Range and Focusing
Still Images
Movies
Shooting with the AF Lock
The focus can be locked. After you lock the focus, the focal position will not
change even when you release your finger from the shutter button.
1 Lock the focus.
zzWith the shutter button pressed halfway,
press the <q> button.
XXThe focus is now locked, and [ ] and
the MF indicator are displayed.
zzTo unlock the focus, once again hold the
shutter button halfway down and press
the <q> button.
2 Compose the shot and shoot.
140
Shooting Range and Focusing
Still Images
Focus Bracketing (Focus-BKT Mode)
Three consecutive images are captured each time you shoot, with the
first one at the focal distance you set manually and the others at farther
and nearer focal positions determined by presets. The distance from your
specified focus can be set in three levels.
1 Choose [ ].
zzPress the <m> button, choose
[
[
] in the menu, and then choose
2 Configure the setting.
zzPrehe <l> button, and then
adjhe setting by pressing the
><r> buttons or turning the <5>
.
• You can also access the setting screen in step 2 by choosing [
] in step 1
shot.
141
Flash
Still Images
Activating Flash
You can have the flash fire for each shot. For details on the flash range, see
2 Configure the setting.
zzPress the <h> button, choose [h] (either
press the <q><r> buttons or turn the
<5> dial), and then press the <m>
button.
XXOnce the setting is complete, [h] is
displayed.
• The setting screen cannot be accessed pressing the <h>
button when the flash is loweredthe flsh with your finger in
advance.
• If the flash fires, vignetting ccur.
142
Flash
Still Images
Shooting with Slow Synchro
With this option, the flash fires to increase the brightness of the main
subject (such as people) while the camera shoots at a slow shutter speed to
increase the brightness of the background that is out of the flash range.
2 Configure the setting.
zzPress the <h> button, choose [Z] (either
press the <q><r> buttons or turn the
<5> dial), and then press the <m>
button.
XXOnce the setting is complete, [Z] is
displaye.
3 Sh.
en fter the flash fires, ensure that
main subject does not move until the
shutter sound is finished playing.
• Mount the camera on a tripod or take other measures to keep it
still and prevent camera shake. Additionally, you should set [IS
Mode] to [Off] when using a tripod or other means to hold the
• The setting screen cannot be accessed by pressing the <h>
button when the flash is lowered. Lift the flash with your finger in
advance.
143
Flash
Still Images
Adjusting the Flash Exposure Compensation
flash exposure from –2 to +2 stops, in 1/3-stop increments.
zzPress the <m> button, choose [X] in
the menu, and adjust the setting by either
pressing the <q><r> buttons or turning
XXOnce the setting is complete, [X] is
displayed.
• When there is a risk of overexposure, the camera automatically adjusts the
shutter speed or aperture value during the flasshots to reduce washed-
out highlights and shoot at optimal exposureHwever, you can deactivate
automatic adjustment of the shutter sand perture value by accessing
to [Off].
• You can also configure he flassure compensation by accessing
the [4] tab.
• You can also access the [Built-in Flash Settings] <n> screen as follows
(except when an optional external flash is mounted).
- Press and hold the <h> button for at least one second.
- When the flash is up, press the <h> button and immediately press the
<n> button.
Still Images
Shooting with the FE Lock
shots.
1 Lift the flash and set the flash to
144
Flash
2 Lock the flash exposure.
zzAim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<o> button.
XXThe flash fires, and when [ ] is
displayed, the flash output level is
retained.
zzTo unlock FE, release the shutter button
and press the <o> button again. In this
case, [ ] is no longer displayed.
3 Compose the shot and shoot.
zzAfter one shot, FE is unlocked and [ ] is
no longer dsplayed.
• FE: Flash Exposure
Still Images
Changing the Flash Timing
Change the timing of the flash and shutter release as follows.
1 Access the setting screen.
zzPress the <n> button, choose [Flash
Control] on the [4] tab, and then press
2 Configure the setting.
zzChoose [Shutter Sync.], and then choose
The flash fires immediately after
1st-curtain
the shutter opens.
The flash fires immediately before
2nd-curtain
the shutter closes.
145
Still Images
Shooting RAW Images
RAW images are “raw” (unprocessed) data, recorded with essentially no
loss of image quality from the camera’s internal image processing. Use
minimal loss of image quality.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
Records JPEG images. JPEG images are processed in the camera for optimal
image quality and compressed to reduce file size. However, the compression
process is irreversible, and images cannot be restred to their original,
unprocessed state. Image processing may also ase some loss of image quality.
Records RAW images. RAW images are (unpocessed) data, recorded with
essentially no loss of image qualitm thcamera’s image processing. The
data cannot be used in this state ing or printing on a computer. You must
first use the included software (Digoto Professional) to convert images to
ordinary JPEG or TIFF file. Images can be adjusted with minimal loss of image
quality.
For details on resolution and the number of shots that will fit on a card, see
Records two images, both a RAW image and a JPEG image, for each shot.
The JPEG image can be printed or viewed on a computer without using the
included software.
• When transferring RAW images (or RAW and JPEG images
recorded together) to a computer, always use the included
• The file extension for JPEG images is .JPG, and the extension for RAW
images is .CR2.
146
Other Settings
Still Images
Changing the Compression Ratio (Image Quality)
Choose from two compression ratios, as follows: [ ] (Super Fine), [
(Fine).
]
For guidelines on how many shots at each compression ratio can fit on a
Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, press the <l> button, and
Still Images
Movies
Changing the IS Mode ettings
1 cess the setting screen.
zess the <n> button, choose [IS
Settings] on the [4] tab, and then press
2 Configure the setting.
zzChoose [IS Mode], and then choose the
Optimal image stabilization for the
Continuous shooting conditions is automatically
Image stabilization is active only at
Shoot Only*
the moment of shooting.
Off
Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
147
Other Settings
Movies
0
Shooting Movies With Subjects at the Same Size Shown
Before Shooting
Normally, once movie recording begins, a smaller image display area (field
of view) is shown, with the subject slightly enlarged due to rotational image
stabilization. To shoot subjects at the same size shown before shooting, you
can disable this image stabilization.
the [IS Settings] screen.
zzChoose [Dynamic IS], and then choose
• You can also set [IS Mode] to [Off], ssubjets are recorded at the same
size shown before shooting.
148
Still Images
Specific Shutter Speeds (<Tv> Mode)
Set your preferred shutter speed before shooting as follows. The camera
automatically adjusts the aperture value to suit your shutter speed.
1 Enter <M> mode.
zzSet the mode dial to <M>.
2 Set the shutter speed.
zzTurn the <5> dial to set the shutter
speed.
• With shutter speeds of 1.3 seconds or slower, there will be a delay
before you can shoot again, as images are processed to remove
noise.
• When shooting at low shutter speeds n tripod, you should set
• The speed you set may be lereautomatically as needed if the
flash fires.
• With shutter speeds of 1.3 sds or slower, ISO speed is [
and cannot be changed.
]
• Orange display of aperture values when you press the shutter
button halfway indicates that the settings deviate from standard
exposure. Adjust the shutter speed until the aperture value is
• <M>: Time value
150
Still Images
Specific Aperture Values (<Av> Mode)
Set your preferred aperture value before shooting as follows. The camera
automatically adjusts the shutter speed to suit your aperture value.
1 Enter <B> mode.
zzSet the mode dial to <B>.
2 Set the aperture value.
zzTurn the <5> dial to set the aperture
value.
• Orange display of shutter speeds when you press the shutter
button halfway indicates that the settings deviate from standard
exposure. Adjust the aperture value until the shutter speed is
displayed in white, or use safety sift see below).
• <B>: Aperture value (sizhe ening made by the iris in the lens)
• To avoid exposure problemM> and <B> modes, you can have the
camera automaticay adjust hutter speed or aperture value, even when
standard exposure annootherwise be obtained. Press the <n> button
is disabled when the flash fires.
151
Still Images
Specific Shutter Speeds and Aperture
Values (<M> Mode)
Follow these steps before shooting to set your preferred shutter speed and
aperture value to obtain the desired exposure.
For details on available shutter speeds and aperture values, see
1 Enter <D> mode.
zzSet the mode dial to <D>.
2 Configure the setting.
zzPress the <o> button, choose
adjustment of shutter speed or aperture
value, and turn the <5> dial to specify
a value.
XXAn exposure lvel mark based on your
specified valus shown on the exposure
level itor focomparison to the
ard exposure level.
Aperture Value
Shutter Speed
Xposure level mark is shown
in orange when the difference from
standard exposure exceeds 2 stops. “–2”
or “+2” is displayed in orange in the lower
right when you press the shutter button
halfway.
Standard
Exposure Level
Exposure Level Mark
Exposure Level
Indicator
• After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
• Screen brightness may change depending on your specified
shutter speed or aperture value. However, screen brightness
remains the same when the flash is up and the mode is set to [h].
• To have the setting you did not configure in step 2 (whether shutter
speed or aperture value) automatically adjusted to obtain standard
exposure, hold the shutter button halfway and press the <o> button.
Note that standard exposure may not be possible with some settings.
• With shutter speeds of 1.3 seconds or slower, ISO speed is [
]
and cannot be changed.
152
Specific Shutter Speeds and Aperture Values (<M> Mode)
• <D>: Manual
• Calculation of standard exposure is based on the specified metering method
Still Images
Adjusting the Flash Output
Choose from the three flash levels in <D> mode.
1 Enter <D> mode.
zzSet the mode dial to <D>.
2 Configure the setting.
zzPress the <m> button, choose [X] in
the menu, and adjust the setting by either
pressing th<q><r> buttons or turning
5
XOnche setting is complete, [X] is
plaed.
choosing [Flash Output] in [Flash Control] on the [4] tab.
• You can set the flash level in <M> or <B> mode by accessing <n>
Mode] to [Manual].
• You can also access the [Built-in Flash Settings] <n> screen as follows
(except when an external flash (sold separately) is attached to the camera).
- Press and hold the <h> button for at least one second.
- When the flash is up, press the <h> button and immediately press the
<n> button.
153
Customization for Shooting Styles
Still Images
Movies
Customizing Display Information
Customize what information is shown in various display modes (switched by
pressing the <l> button), and whether or not the information is shown
on the LCD monitor or viewfinder.
1 Access the setting screen.
zzPress the <n> button, choose
[Custom Display] on the [4] tab, and
2 Configure the setting.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose an item, and
then press the <m> button. Items you
choose for dsay are labeled with [ ].
zzIn [LCwfiner], you can specify to
sor ide this information in LCD
r oviewfinder display modes
(shed by pressing the <l>
button). Press the <o><p><q><r>
buttons or turn the <5> dial to choose
the screen ([ ], [ ], [ ], or [ ]), and
then press the <m> button. To hide
this information in the display mode
(accessed by pressing the <l>
button), add [ ] to the icon. Note that the
current display mode cannot be modified.
XXSelected items (labeled with a [ ]) will
be included in display.
Shooting Info
Grid Lines
Displays a reference grid.
Electronic Level
Histogram
154
Customization for Shooting Styles
• Settings will not be saved if you press the shutter button halfway and
return to the shooting screen from the custom display settings screen.
• Grayed-out items can also be specified, but they may not be
displayed in some shooting modes.
• Grid lines are not recorded in your shots.
Still Images
Movies
Assigning Functions to the < > Button
1 Access the setting screen.
zzPress the <n> button, choose [Set
Shortcut button] on the [4] tab, and then
2 Cgure the setting.
esthe <o><p><q><r> buttons or
the <5> dial to choose a function to
assign, and then press the <m> button.
3
Use the assigned function as needed.
zzPress the < > button to activate the
assigned function.
• To restore default settings, choose [ ].
• Icons labeled with [ ] indicate that the function is not available in the
current shooting mode or under current function conditions.
•
When the [
] or [
] function is used, each press of the <
> button records
] or [
> button adjusts and
].
• When the [%] function is used, each press of the <
locks the focus, and [%] is displayed on the screen.
• Pressing the <
> button when the [ ] function is used deactivates both
screen and viewfinder display. To restore the display, do any of the following.
- Press any button (other than the power button)
- Hold the camera in another orientation
- Open and close the screen
- Raise and lower the flash
155
Customization for Shooting Styles
Still Images
Saving Shooting Settings
Save commonly used shooting modes and your configured function settings
for reuse. To access saved settings later, simply turn the mode dial to <
or < >. Even settings that are usually cleared when you switch shooting
>
modes or turn the camera off (such as self-timer settings) can be retained
this way.
Settings that can be saved
•
•
•
•
•
•
Shooting modes ( <G>, <M>, <B>, and <D>)
Shooting menu settings
Zoom positions
1 Eter shooting mode with
gs you want to save, and
chge the settings as desired.
2 Configure the setting.
zzPress the <n> button, choose [Save
Settings] on the [4] tab, and then press
the <m> button.
3 Save the settings.
zzPress the <q><r> buttons or turn the
<5> dial to choose the destination, and
then press the <m> button.
156
Customization for Shooting Styles
• To edit saved settings (except their shooting mode), choose <
>
or < >, change the settings, and then repeat steps 2 – 3. These
setting details are not applied in other shooting modes.
• To clear information you have saved to < > or < > and restore default
values, turn the mode dial to < > or < > and choose [Reset All]
Still Images
Movies
Saving Commonly Used Shooting Menus (My Menu)
Save up to five commonly used shooting menus as menus on the [ ] tab,
for instant access to all of these items from a single screen.
1 Access the setting screen.
zzPresthe <n> button, choose [My
Meetting] on the [ ] tab, and then
2 Configure the setting.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Select items], and
then press the <m> button.
zzPress the <o><p> buttons or turn the
<5> dial to choose menus to save (up
to five), and then press the <m> button.
XX[ ] is displayed.
zzTo cancel saving, press the <m> button.
[
] is no longer displayed.
zzPress the <n> button.
157
Customization for Shooting Styles
3 Rearrange the menu list order,
as needed.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Sort], and then
press the <m> button.
zzPress the <o><p> buttons or turn the
<5> dial to choose a menu to move,
and then press the <m> button.
zzPress the <o><p> buttons or turn the
<5> dial to change the order, and then
press the <m> button.
zzPress the <n> button.
• Grayed-out items in step 2 can also be specified, but they may not
be available in some shooting modes.
• To make My Menu immediately acessby pressing the <n> button
in Shooting mode, choose [Set viw] and press the <q><r> buttons
to choose [Yes].
158
6
Playback Mode
Have fun reviewing your shots, anbrowse or edit them
in many ways
•
To prepare the camera for these operations, press the <1> button to
enter Playback mode.
• It may not be possible to play back or edit images that were
renamed or already edited on a computer, or images from other
cameras.
159
Still Images
Movies
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
zzPress the <1> button.
XXYour last shot is displayed.
2 Browse through your images.
zzTo view the previous image, press
the <q> button or turn the <5> dial
counterclockwise. To view the next
image, press the <r> button or turn the
<5> dial clockwise.
zzPress and holthe <q><r> buttons to
browse ougimages quickly.
zzTo access Scroll Display mode, turn the
5
5
<
<
> dial rapidly. In this mode, turn the
> dial to browse through images.
zzTo return to single-image display, press
the <m> button.
zzTo browse images grouped by shooting
date, press the <o><p> buttons in
Scroll Display mode.
zzMovies are identified by a [
] icon. To
play movies, go to step 3.
160
Viewing
3 Play movies.
zzTo start playback, press the <m> button
to access the movie control panel,
choose [ ] (either press the <q><r>
buttons or turn the <5> dial), and then
press the <m> button again.
4 Adjust the volume.
Volume
zzPress the <o><p> buttons to adjust the
volume.
5 Pause playback.
zzTo pause or resume playback, press the
<m> button.
XXAfter the movie is finished, [
] is
displayed.
• To switch to Shooting mode om Pback mode, press the shutter button
halfway.
• To deactivate ScroDisplaythe <n> button, choose [Scroll
Display] on the [1tab, and then choose [Off].
• If you prefer to have the most recent shot displayed when you enter
Playback mode, press the <n> button, and on the [1] tab, choose
[Resume] and then [Last shot].
• To change the transition shown between images, press the <n> button,
choose [Transition] on the [1] tab, and then press the <q><r> buttons to
choose the effect.
161
Viewing
Still Images
Movies
Switching Display Modes
Press the <l> button to view other information on the screen, or to hide
Open the screen to activate it when the camera is on. This will deactivate
the viewfinder. Similarly, close the screen (facing the camera body) to
No Information
Display
Simple
Information
Display
Detailed
Information
Display
Enables you to check
*Not shown for movies.
• Switching display modes by pressing l> button is also possible
immediately after you shoot, while youot is displayed. However, simple
information display is not avaio cange the initial display mode, press
Still Images
Movies
Overexposure Warning (for Image Highlights)
Washed-out highlights in the image flash on the screen in detailed
information display (see above).
Still Images
Movies
Histogram
High
Low
zzThe graph in detailed information display
(see above) is a histogram showing the
distribution of brightness in the image.
The horizontal axis represents the degree
of brightness, and the vertical axis, how
much of the image is at each level of
brightness. Viewing the histogram is a
way to check exposure.
Dark
Bright
zzThe histogram can also be accessed
162
Viewing
Still Images
Movies
RGB Histogram
zzTo view an RGB histogram, press the
<o> button in detailed information
display. The RGB histogram shows the
distribution of shades of red, green, and
blue in an image. The horizontal axis
represents R, G, or B brightness, and the
vertical axis, how much of the image is
at that level of brightness. Viewing this
histogram enables you to check image
color characteristics.
RGB Histogram
zzPress the <o> button again to return to
detailed information display.
Still Images
Checking People Deteed in Face ID
displayed.
Switch to simple information
display mode and check.
zzPress the <l> button repeatedly until
simple information display is activated,
and then press the <q><r> buttons to
choose an image.
zzNames will be displayed on detected
people.
• If you do not want names to display on images shot using Face ID, press the
<n> button, choose [Face ID Info] on the [1] tab, and then set [Name
Display] to [Off].
163
Viewing
Movies
Viewing Movie Digest Clips
still image shooting as follows.
1 Choose an image.
zzStill images shot in [ ] mode are labeled
with an [
] icon.
zzChoose a still image labeled with [
]
and press the <m> button.
2 Play the clip.
zzAfter [Play back
movie?] is displayed,
press the <q>r> buttons or turn the
<5> o chose [OK], and then press
t<mbutton.
Xovie clip recorded automatically on
thy of still image shooting is played
back, from the beginning.
• After a moment, [
] will no longer be displayed when you are using the
164
Viewing
Still Images
Checking the Focus
To check the focus of your shots, you can magnify the area of the image
that was in the AF frame at the time of shooting.
1 Access Focus Check.
XXA white frame is displayed where the AF
frame was when the focus was set.
XXGray frames are displayed over faces
detected later, in Playback mode.
XXThe portion of the image in the orange
frame is magnified.
2 Switch fames.
zzMove the om lever toward <k> once.
XXThe een aleft is displayed.
swtch to a different frame when there
multiple frames, press the <m>
button.
3 Zoom in or out, or view other
image areas.
zzAs you examine the focus, use the
zoom lever to zoom in or out. Press the
<o><p><q><r> buttons to adjust the
display position.
zzPress the <n> button to restore the
original display in step 1.
165
Browsing and Filtering Images
Still Images
Movies
Navigating Through Images in an Index
By displaying multiple images in an index, you can quickly find the images
you are looking for.
1 Display images in an index.
zzMove the zoom lever toward <g> to
display images in an index. Moving the
lever again will increase the number of
images shown.
zzTo display fewer images, move the zoom
lever toward <k>. Fewer images are
shown each time you move the lever.
2 Choose an image.
zzTurn the <5dial to scroll through the
image
zzs th<o><p><q><r> buttons to
e an image.
XXAn ange frame is displayed around the
selected image.
zzPress the <m> button to view the
selected image in single-image display.
Still Images
Movies
Finding Images Matching Specified Conditions
Find desired images quickly on a memory card full of images by filtering image
display or jumping between images according to your specified conditions. You
Favorites
Displays the images shot on a specific date.
Shot Date
My Category
Still image/Movie
;
Displays still images, movies, or movies shot in [
Name
166
Browsing and Filtering Images
Still Images
Movies
Filtering Display by [ ], [ ], [ ], or [
]
;
1 Choose the first condition for
image display or navigation.
zzIn single-image display (except detailed
information display), press the <o>
button, and then press the <o><p>
buttons to choose a display filter.
zzWhen [ ] is selected, you can view
only images matching this condition by
pressing the <q><r> buttons. To perform
an action for all of these images together,
press the <m> button and go to step 3.
2 Choose he second condition
and chek the images found.
zzPrehe <q><r> buttons to choose
other condition. Once you turn the
5> dial, you can view the images
narrowed down by your conditions.
zzTo cancel display filtering, press the
<n> button.
zzTo switch to filtered image display, press
the <m> button and go to step 3.
3 View the filtered images.
zzImages matching your conditions are
displayed in yellow frames. To view
only these images, press the <q><r>
buttons, or turn the <5> dial.
zzTo exit filtered image display, press the
<o> button, and after [Image search
canceled] is displayed, press the <m>
button.
167
Browsing and Filtering Images
• When the camera has found no corresponding images for some
conditions, those conditions will not be available.
• To show or hide information, press the <l> button in step 2.
images found or add them to a photobook by choosing [Select All Images
display ends.
Still Images
Filtering Display by [
]
1 se [ ].
] and press the <m> button.
2 Choose a person.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose a person,
and then press the <m> button.
3 View the filtered images.
images.
168
Browsing and Filtering Images
Still Images
Viewing Individual Images in a Group
displayed together, but they can also be viewed individually.
1 Choose an image group.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image labeled
[
], and then press the <m> button.
2 View individual images in the
group.
zzPressing the <q><r> buttons or turning
the <ial wll display only images in
trou.
zng the <o> button will display
[Diay all images]. Press <m> to
cancel group playback.
• During group playback (step 2), you can browse through images quickly
in a group at once or add them to a photobook by choosing [All Images in
• To ungroup images so that you can view them individually, press the
<n> button, choose [Group Images] on the [1] tab, and then choose
individual playback.
170
Editing Face ID Information
If you notice that a name is incorrect during playback, you can change it or
erase it.
However, you cannot add names for people who are not detected by Face
ID (names are not displayed), and for people whose names have been
erased.
Changing Names
1 Access the setting screen.
zzPress the <n> button and choose
zzPress the <o><p> buttons or turn the
<5> dial to choose [Edit ID Info], and
then press the <m> button.
2 Choose an image.
choose an mage and press the <m>
but
onge frame is displayed around the
ected face. When multiple names are
displayed in an image, press the <q><r>
buttons or turn the <5> dial to choose
the name to change, and then press the
<m> button.
3 Choose the item to edit.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose [Overwrite],
and then press the <m> button.
4 Choose the name of the person
to overwrite.
the name of the person you want to
overwrite.
171
Image Viewing Options
Erasing Names
zzFollowing step 3 above, choose [Erase]
and press the <m> button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [OK], and then press the <m>
button.
Image Viewing Options
Still Images
Magnifying Images
1 Magnify an image.
zzMoving the zom lever toward <k> will
zoom ind mgnify the image. You
can mafy images up to about 10x by
uing to hold the zoom lever.
zzTm out, move the zoom lever
oward <g>. You can return to single-
image display by continuing to hold it.
2 Move the display position and
switch images as needed.
zzTo move the display position, press the
<o><p><q><r> buttons.
Approximate Position
of Displayed Area
zzTo switch to other images while zoomed,
turn the <5> dial.
• You can return to single-image display from magnified display by pressing
the <n> button.
172
Image Viewing Options
Movies
Still Images
Viewing Slideshows
Automatically play back images from a memory card as follows.
1 Access the setting screen.
zzPress the <n> button, and then
choose [Slideshow] on the [1] tab
2 Configure the setting.
zzChoose a menu item to configure, and
3 Start autmatic playback.
zzPrehe <o><p> buttons or turn the
5> dial to choose [Start], and then
ss the <m> button.
XXThe slideshow will start a few seconds
after [Loading image...] is displayed.
zzPress the <n> button to stop the
slideshow.
during slideshows.
• To pause or resume slideshows, press the <m> button.
• You can switch to other images during playback by pressing the <q><r>
buttons or turning the <5> dial. For fast-forward or fast-rewind, hold the
<q><r> buttons down.
• [Play Time] cannot be modified when [Bubble] is chosen in [Effect].
• You can also start slideshows from single-image display by pressing and
holding the <m> button and immediately pressing the <
> button.
173
Image Viewing Options
Still Images
Auto Playback of Similar Images (Smart Shuffle)
Based on the current image, the camera offers four images similar to it
that you may wish to view. After you choose to view one of those images,
the camera offers four more images. This is an enjoyable way to play back
images in an unexpected order. Try this feature after you have taken many
shots, in many kinds of scenes.
1 Choose Smart Shuffle.
zzPress the <n> button, choose
[Smart Shuffle] on the [1] tab, and then
XXFour candidate images are displayed.
2 Choose an mage.
zzPress t<o><p><q><r> buttons to
e te image you want to view next.
XXYhosen image is displayed in the
center, surrounded by the next four
candidate images.
zzFor full-screen display of the center
image, press the <m> button. To restore
the original display, press the <m>
button again.
zzPress the <n> button to restore
single-image display.
• Only still images shot with this camera are played back using
Smart Shuffle.
• Smart Shuffle is not available in the following cases:
- There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
174
Still Images
Movies
Protecting Images
Protect important images to prevent accidental erasure by the camera
Choosing a Selection Method
1 Access the setting screen.
zzPress the <n> button and choose
2 Choose a selection method.
zzChoose a menu item and a setting as
zzTo return to the menu screen, press the
<n> btton.
• Protected imageon a memory card will be erased if you format
• Protected images cannot be erased using the camera’s erasure function. To
erase them this way, first cancel protection.
Choosing Images Individually
1 Choose [Select].
zzFollowing step 2 above, choose [Select]
and press the <m> button.
175
Protecting Images
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button. [ ] is displayed.
zzTo cancel selection, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this process to specify other
images.
3 Protect the image.
zzPress the <n> button. A
confirmation message is displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> buttn.
• Images will not be protecteyou witch to Shooting mode or turn
the camera off before finise setup process in step 3.
Selecting a Range
1 Choose [Select Range].
[Select Range] and press the <m>
button.
2 Choose a starting image.
zzPress the <m> button.
176
Protecting Images
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
3 Choose an ending image.
zzPress the <r> button to choose [Last
image], and then press the <m> button.
zzPress the <q><r> buttons or turn the
<5dial tchoose an image, and then
prehe <m> button.
ages before the first image cannot be
ected as the last image.
4 Protect the images.
zzPress the <p> button to choose
[Protect], and then press the <m>
button.
• You can also choose the first or last image by turning the <5> dial when the
top screen in steps 2 and 3 is displayed.
177
Protecting Images
Specifying All Images at Once
1 Choose [Select All Images].
[Select All Images] and press the <m>
button.
2 Protect the images.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Protect], and then
press the <m> button.
• To cancel protection for groups of images, chose [Unlock] in step 4 of
“Selecting a Range” or in step 2 of “Specifying l Images at Once”.
178
Still Images
Movies
Erasing Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered. However, protected
1 Choose an image to erase.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
2 Erase the image.
zzPress the <a> button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [Erase], and then press the <m>
button.
XXThe currenimage is now erased.
zzTo cancel asure, press the <q><r>
buor tun the <5> dial to choose
anel], and then press the <m>
ton.
• Pressing the <a> button while [ ] images are displayed will give you
the option of choosing [Erase
], [Erase JPEG], or [Erase
+JPEG] for
deletion.
Erasing All Images
You can erase all images at once. Be careful when erasing images,
cannot be erased.
179
Erasing Images
Choosing a Selection Method
1 Access the setting screen.
zzPress the <n> button, and then
2 Choose a selection method.
zzPress the <o><p> buttons to choose
a selection method, and then press the
<m> button.
zzTo return to the menu screen, press the
<n> button.
Choosing Images Individually
1 se [Select].
zzFollwing step 2 above, choose [Select]
and press the <m> button.
2 Choose an image.
choose an image, [ ] is displayed.
zzTo cancel selection, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this process to specify other
images.
3 Erase the image.
zzPress the <n> button. A
confirmation message is displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
180
Erasing Images
Selecting a Range
1 Choose [Select Range].
[Select Range] and press the <m>
button.
2 Choose images.
images.
3 Erase the images.
zzPress the <p> button to choose [Erase],
and then press the <m> button.
Specifying All Images nce
1 hoose [Select All Images].
[Select All Images] and press the <m>
button.
2 Erase the images.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
181
Still Images
Movies
Rotating Images
Change the orientation of images and save them as follows.
1 Choose [Rotate].
zzPress the <n> button and choose
2 Rotate the image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
zzThe image is rotated 90° each time you
press the <m> button.
zzTo return to thmenu screen, press the
<nutto.
• Movies with an image qual] or [ ] cannot be rotated.
• Rotation is not possble when [Auto Rotate] is set to [Off]
182
Rotating Images
Deactivating Auto Rotation
Follow these steps to deactivate automatic rotation by the camera, which
rotates images shot in vertical orientation so they are displayed vertically on
the camera.
zzPress the <n> button, choose [Auto
Rotate] on the [1] tab, and then choose
[Off]. Additionally, images already rotted will be displayed in the
original orientation.
[Off], images shot vertiwill e displayed vertically, and rotated
images will be displayee rotated orientation.
183
Image Categories
groups. By choosing a category in filtered playback, you can restrict the
following operations to all of those images.
•
Still Images
Movies
Tagging Images as Favorites
1 Choose [Favorites].
zzPress the <n> button and choose
2 Chooan image.
zthe <q><r> buttons or turn the
<dial to choose an image, and then
press the <m> button. [ ] is displayed.
zzTo untag the image, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this process to choose additional
images.
3 Finish the setup process.
zzPress the <n> button. A
confirmation message is displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
• Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 3.
184
Image Categories
) when
• Favorite images will have a three-star rating (
transferred to computers running Windows 7 or Windows Vista. (Does not
apply to movies or RAW images.)
Still Images
Movies
Organizing Images by Category (My Category)
You can organize images into categories. Note that images are
automatically categorized at the time of shooting, according to shooting
conditions.
:
:
Images with detected faces, or images shot in [I] or [ ] mode.
Images detected as [ ], [ ], or [ ] in <A> mode, or images
shot in [ ] mode.
:
Images shot in [ ], [P] or [t] mode.
Choosing a Selection Method
1 Acs the setting screen.
esthe <n> button, and then
ose [My Category] on the [1] tab
2 Choose a selection method.
zzChoose a menu item and a setting as
zzTo return to the menu screen, press the
<n> button.
185
Image Categories
Choosing Images Individually
1 Choose [Select].
[Select] and press the <m> button.
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
3 Choose a category.
zzPress the <o><p> buttons to choose
a category and then press the <m>
button. [ ] is displayed.
zzTo cancel selection, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this prcess to choose additional
image
4 h the setup process.
zzPrthe <n> button. A
confirmation message is displayed. Press
the <q><r> buttons or turn the <5>
dial to choose [OK], and then press the
<m> button.
• Images will not be assigned to a category if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 4.
186
Image Categories
Selecting a Range
1 Choose [Select Range].
[Select Range] and press the <m>
button.
2 Choose images.
images.
3 Choose a category.
zzPress the <p> button to choose the type
of image, and then press the <q><r>
buttons or turn the <5> dial to choose
a category.
4 Finh thsetup process.
zzPrehe <p> button to choose [Select],
d then press the <m> button.
• You can clear the seectioof all images in the [Select Range] category by
choosing [Deselect] in step 4.
187
Editing Still Images
card has sufficient free space.
Still Images
Resizing Images
Save a copy of images at a lower resolution.
1 Choose [Resize].
zzPress the <n> button and choose
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <mbutton.
3 Chooan image size.
zth<q><r> buttons or turn the
dial to choose the size, and then
prethe <m> button.
XX[Save new image?] is displayed.
4 Save the new image.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
XXThe image is now saved as a new file.
188
Editing Still Images
5 Review the new image.
zzPress the <n> button. [Display new
image?] is displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose [Yes], and then
press the <m> button.
XXThe saved image is now displayed.
• Editing is not possible for images saved as [ ] in step 3.
• RAW images cannot be edited.
• Images cannot be resized to a higher resolution.
189
Editing Still Images
Still Images
Cropping
You can specify a portion of an image to save as a separate image file.
1 Choose [Cropping].
zzPress the <n> button, and then choose
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
Cropping Area
3 Adjust the cropping area.
XXA frame is displayed around the portion of
the image to bcropped.
XXThe oral imge is shown in the upper
left, anpreview of the image as
ed s shown in the lower right.
zzTze the frame, move the zoom lever.
zzTo move the frame, press the
<o><p><q><r> buttons.
zzTo change the frame orientation, press
the <l> button.
Preview of Image After Cropping
Resolution After Cropping
zzFaces detected in the image are
enclosed in gray frames in the upper-left
image. To crop the image based on this
frame, turn the <5> dial to switch to the
other frame.
zzPress the <m> button.
4
Save as a new image and review.
• Editing is not possible for images shot at a resolution of [
]
• RAW images cannot be edited.
190
Editing Still Images
• Images supported for cropping will have the same aspect ratio after
cropping.
• Cropped images will have a smaller resolution than uncropped images.
Still Images
Changing Image Color Tones (My Colors)
You can adjust image colors and then save the edited image as a separate
1 Choose [My Colors].
zzPress the <n> button, and then
choose [My Colors] on the [1] tab
2 Choose n image.
zzPrehe <q><r> buttons or turn the
<5ial to choose an image, and then
ss the <m> button.
3 Choose an option.
zzPress the <q><r> buttons or turn the
<5> dial to choose an option, and then
press the <m> button.
4 Save as a new image and
review.
• Image quality of pictures you repeatedly edit this way will be a little
lower each time, and you may not be able to obtain the desired
color.
• Colors of RAW images cannot be edited.
• The color of images edited using this function may vary slightly from the
191
Editing Still Images
Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate file.
1 Choose [i-Contrast].
zzPress the <n> button, and then
choose [i-Contrast] on the [1] tab
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to coose an image, and then
press m> button.
3 osan option.
zzPhe <q><r> buttons or turn the
<5> dial to choose an option, and then
press the <m> button.
4 Save as a new image and
review.
• For some images, correction may be inaccurate or may cause
images to appear grainy.
• Images may look grainy after repeated editing using this function.
• RAW images cannot be edited this way.
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
192
Editing Still Images
Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
1 Choose [Red-Eye Correction].
zzPress the <n> button, and then
choose [Red-Eye Correction] on the [1]
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
3 Correct the image.
zzPress thm> button.
XXRee detcted by the camera is now
orrted, and frames are displayed
uncorrected image areas.
zlarge or reduce images as needed.
4
Save as a new image and review.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose [New File],
and then press the <m> button.
XXThe image is now saved as a new file.
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
• Protected images cannot be overwritten.
• RAW images cannot be edited this way.
• Red-eye correction can be applied to JPEG images shot in [ ],
but the original image cannot be overwritten.
193
Movies
Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
1 Choose [*].
choose [*] and press the <m> button.
XXThe movie editing panel and editing bar
are now displayed.
Movie Editing Panel
2 Specify portions to cut.
zzPress the <o><p> buttons to choose
[
] or [ ].
zzTo view the portions you can cut
(identified by [ ] on the screen), press
the <q><r> bttons or turn the <5>
dial to e [ ]Cut the beginning of the
mvie (m [ ]) by choosing [ ], and
ed of the movie by choosing
Movie Editing Bar
[
zzEven if you move [ ] to a position other
than a [ ] mark, choosing [ ] will only
cut the portion from the nearest [ ] to
the left, and choosing [ ] will cut the
portion from the nearest [ ] to the right.
3 Review the edited movie.
zzPress the <o><p> buttons to choose
[
], and then press the <m> button.
The edited movie is now played.
zzTo edit the movie again, repeat step 2.
zzTo cancel editing, press the <o><p>
buttons to choose [ ]. Press the <m>
button, choose [OK] (either press the
<q><r> buttons or turn the <5> dial),
and then press the <m> button again.
194
Editing Movies
4 Save the edited movie.
zzPress the <o><p> buttons to choose
], and then press the <m> button.
[
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose [New File],
and then press the <m> button.
XXThe movie is now saved as a new file.
• To overwrite the original movie with the cut one, choose
[Overwrite] in step 4. In this case, the original movie will be erased.
• [Overwrite] is only available when memory cards lack sufficient
free space.
• Movies may not be saved if the battery runs out while saving is in
progress.
• When editing movies, you should use a fully charged battery or an
195
Editing Movies
Movies
Editing Movie Digest Clips
needed. Be careful when erasing chapters, because they cannot be
recovered.
1 Select the chapter to erase.
a clip recorded in [ ] mode.
zzChoose the chapter to erase by pressing
the <q><r> buttons or turning the <5>
dial, and then choosing [ ] or [ ].
2 Choose [ ].
choos] and press the <m> button.
Xelted chapter is played back
edly.
3 Confirm erasure.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
XXThe chapter is erased, and the clip is
overwritten.
• [ ] is not displayed if you select a chapter when the camera is connected
to a printer.
196
Adjusting Basic Camera Functions
Functions can be configured on the [3] tab. Customize commonly used
Silencing Camera Operations
Silence camera sounds and movies as follows.
zzChoose [Mute], and then choose [On].
• Operation can also be silenced by holding down the <l> button as you
turn the camera on.
restore sound during movies, press tho> bton. Adjust volume with the
<o><p> buttons, as needed.
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
zzChoose [Volume], and then press the
<m> button.
zzChoose an item, and then press the
<q><r> buttons to adjust the volume.
198
Adjusting Basic Camera Functions
Customizing Sounds
Customize camera operating sounds as follows.
zzChoose [Sound Options], and then press
the <m> button.
zzChoose an item, and then press the
<q><r> buttons to choose an option.
Preset sounds
1
(cannot be modified)
Preset sounds
2
Can be changed by using the included
software.
changes to [Shutter Sound].
Hiding Hints and Tips
Hints and tips are normally shoen you choose FUNC. menu
information.
zzChoose [Hints & Tips], and then choose
[Off].
199
Adjusting Basic Camera Functions
Date and Time
Adjust the date and time as follows.
1 Access the [Date/Time] screen.
zzChoose [Date/Time], and then press the
<m> button.
2 Configure the setting.
zzPress the <q><r> buttons to choose an
option, and then adjust the setting, either
by pressing the <o><p> buttons or
turning the <5> dial.
World Clock
To ensure that your shots will have the correct loal date and time when you
travel abroad, simply register the destination in vance and switch to that
time zone. This convenient feature eliminthe eed to change the Date/
Time setting manually.
Before using the world clock, be set the date and time and your
1 Specify your destination.
zzChoose [Time Zone], and then press the
<m> button.
zzPress the <o><p> buttons or turn the
<5> dial to choose [ World], and then
press the <m> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose the destination.
zzTo set daylight saving time (1 hour
ahead), press the <o><p> buttons to
choose [ ].
zzPress the <m> button.
200
Adjusting Basic Camera Functions
2 Switch to the destination time
zone.
zzPress the <o><p> buttons or turn the
<5> dial to choose [ World], and then
press the <n> button.
XX[ ] is now shown on the shooting screen
update your [
Home] time and date.
Screen Brightness
Adjust screen brightness as follows.
Screen and viewfinder brightness can be set separately. Activate the
desired display in advance by pressing the <l> button.
zzCh[LCD Brightness], and then
ess the <q><r> buttons to adjust the
htness.
• For maximum brightness, press and hold the <l> button for at least
one second when the shooting screen is displayed or when in single-image
display. (This will override the [LCD Brightness] setting on the [3] tab.) To
restore the original brightness, press and hold the <l> button again for
at least one second or restart the camera.
201
Adjusting Basic Camera Functions
Start-up Screen
Customize the start-up screen shown after you turn the camera on as
follows.
zzChoose [Start-up Image], and then press
the <m> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose an option.
No start-up image
Preset image
1
(cannot be modified)
Preset image
2
Assign a desired shot, or use the
included software to change the image.
Customizing the Start-up Scr
1 ss the [Start-up Image]
sn in Playback mode.
zzPress the <1> button.
zzFollowing the previous procedure, choose
[2] and press the <m> button.
2 Choose one of your shots.
zzChoose an image and press the <m>
button. After [Register?] is displayed,
choose [OK] (either press the <q><r>
buttons or turn the <5> dial), and then
press the <m> button.
• The previous start-up setting is overwritten when you assign a new
start-up image.
202
Adjusting Basic Camera Functions
• You can assign the operating sounds and start-up image for your camera
from the included software. For details, refer to the Software Guide
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back them
up.
formatting an Eye-Fi card, install the software on a computer.
1 Access the [Format] screen.
zzChoose [Format], and then press the
<m> buttn.
2 Chse [OK].
ess the <o><p> buttons to choose
ncel], choose [OK] (either press the
<q><r> buttons or turn the <5> dial),
and then press the <m> button.
3 Format the memory card.
zzTo begin the formatting process, press
the <o><p> buttons or turn the <5>
dial to choose [OK], and then press the
<m> button.
zzWhen formatting is finished, [Memory
card formatting complete] is displayed.
Press the <m> button.
203
Adjusting Basic Camera Functions
• Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
• The total card capacity indicated on the formatting screen may be less than
the advertised capacity.
Low-Level Formatting
Perform low-level formatting in these cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing is
slower, continuous shooting is slower, or movie recording suddenly stops.
Low-level formatting erases all data on a memory card. Before low-level
formatting, copy images on the memory card to computer, or take other
steps to back them up.
Perfm lw-level formatting.
press the <o><p> buttons or turn the
<5> dial to choose [Low Level Format],
and then select this option (mark with a
[
]) by pressing the <q><r> buttons.
with the formatting process.
card.
• You can cancel low-level formatting in progress by choosing [Stop]. In this
case, all data will be erased, but the memory card can be used normally.
204
Adjusting Basic Camera Functions
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999)
and saved in folders that store up to 2,000 images each. You can change
how the camera assigns file numbers.
zzChoose [File Numbering], and then
choose an option.
Images are numbered
consecutively (until the 9999th
shot is taken/saved) even if
Continuous
you switch memory cards.
Image numbering is reset to
0001 if you switch memory
Auto Reset
cards, or when a new folder is
created.
• Regardless of the option selected s settg, shots may be numbered
consecutively after the last ber existing images on newly inserted
memory cards. To start sats om 0001, use an empty (or formatted
structure and image formats.
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
zzChoose [Create Folder], and then choose
[Daily].
XXImages will now be saved in folders
created on the shooting date.
205
Adjusting Basic Camera Functions
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
immediately after you press the <1> button, set the retraction timing to
[0 sec.].
zzChoose [Lens Retract], and then choose
[0 sec.].
Power-Saving Adjustment
Adjust the timing of automatic camera and screedeactivation (Auto Power
1 ss the [Power Saving]
scen.
zzChoose [Power Saving], and then press
the <m> button.
2 Configure the settings.
zzAfter choosing an item, press the
<q><r> buttons to adjust it as needed.
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if you set [Auto Power Down] to
[Off].
206
Adjusting Basic Camera Functions
Metric/Non-Metric Display
zzChoose [Units], and then choose [ft/in].
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
level the camera in advance.
1 vel the camera.
zzlace the camera on a flat surface, such
as a table.
2 Access the [Electronic Level]
screen.
zzChoose [Electronic Level], and then press
the <m> button.
3 Calibrate the electronic level.
zzChoose [Calibrate] and press the <m>
button. A confirmation message is
displayed.
zzChoose [OK], and then press the <m>
button.
207
Adjusting Basic Camera Functions
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is
not possible unless you have calibrated the electronic level.
zzChoose [Electronic Level], and then press
the <m> button.
zzChoose [Reset], and then press the
<m> button.
zzChoose [OK], and then press the <m>
button.
XXOnce the electronic level has been reset,
the menu screen is displayed again.
Setting Copyright Information to Record in Images
To record the author’s name and copyright detailin images, set this
information beforehand as follows.
1 Acesthe setting screen.
ze [Copyright Info], and then press
the m> button.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Enter Author’s
Name] or [Enter Copyright Details], and
then press the <m> button.
2 Enter a name.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose a character,
and then press the <m> button to enter
it.
zzUp to 63 characters can be used.
zzChoose [ ] or [ ] and press the <m>
button to move the cursor.
zzTo delete the previous character, either
press the <a> button or choose [ ] and
press the <m> button.
208
Adjusting Basic Camera Functions
3 Save the settings.
zzPress the <n> button. [Accept
changes?] is displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose [Yes], and then
press the <m> button.
XXThe information set here will now be
recorded in images.
• To check the information entered, choose [Display Copyright Info] on the
screen in step 1, and then press the <m> button.
delete copyright information. Some characters entered with the included
software may not display on the camera, but will be correctly recorded in
images.
• You can view, change, and delete copyghinformation recorded in images
by using the included software to imags to a computer.
Deleting All Copyright mation
You can delete both the uthor’s e and copyright details at the same
time as follows.
[Delete Copyright Info].
XXPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
• The copyright info already recorded in images will not be deleted.
209
Adjusting Basic Camera Functions
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed
on the screen. Other certification logos are printed in this guide, on the
camera packaging, or on the camera body.
zzChoose [Certification Logo Display], and
then press the <m> button.
Display Language
Change the display language as needed.
1 Accehe [Language] screen.
zse Language ], and then press
tm> button.
2 Configure the setting.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose a language,
and then press the <m> button.
• You can also access the [Language] screen in Playback mode by pressing
and holding the <m> button and immediately pressing the <n> button.
Adjusting Other Settings
The following settings can also be adjusted on the [3] tab.
•
•
•
210
Adjusting Basic Camera Functions
Restoring Defaults
If you accidentally change a setting, you can restore default camera
settings.
1 Access the [Reset All] screen.
zzChoose [Reset All], and then press the
<m> button.
2 Restore default settings.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
XXDefault settings are now restored.
• The following functions are not restored to efault settings.
211
212
Tips on Using Included Accessories
Effective Battery and Charger Use
• Charge the battery on (or immediately before) the
day of use
Charged batteries gradually lose their charge, even when
they are not used.
You can easily check the charge state of the battery by
attaching the cover so that ▲ is visible on a charged
battery, and attaching it so that ▲ is not visible on an
uncharged battery.
• Long-term battery storage
After using up all remaining battery power, remove the battery from the camera. Store
the battery with the cover attached. Storing a partially charged battery over extended
periods (about a year) may shorten its life or affect performance.
• Using the battery charger abroad
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For power
outlets in a different format, use a commercially avilae adapter for the plug. Never
use an electrical transformer designed for travg, wch may damage the battery.
214
Optional Accessories
The following camera accessories are sold separately. Note that availability
varies by area, and some accessories may no longer be available.
Power Supplies
Battery Pack NB-10L
zzRechargeable lithium-ion battery
Battery Charger CB-2LC/CB-2LCE
zzCharger for Battery Pack NB-10L
AC Adapter Kit ACK-DC80
zzFor powering the camera using
household power. Recommended when
using the camera over extended periods,
or when connecting the camera to a
printer or cmputer. Cannot be used to
charge the amera battery.
• The battery charger anadpter kit can be used in areas with
100 – 240 V AC power Hz).
• For power outletin a different format, use a commercially
available adapter for the plug. Never use an electrical transformer
designed for traveling, which may damage the battery.
215
Optional Accessories
Flash Units
Speedlite 600EX-RT/600EX/580EX II/
430EX II/320EX/270EX II
zzShoe-mounted flash unit that enables
many styles of flash photography.
Speedlite 580EX, 430EX, 270EX, and
220EX are also supported.
Speedlite Bracket SB-E2
zzPrevents unnatural shadows next to
subjects during vertical shooting. Includes
Off-Camera Shoe Cord OC-E3.
Speedlite Transmitter ST-E2
zzEnables wireles control of slave
Speedash units (except Speedlite
X/20EX).
Other Accessories
Interface Cable IFC-400PCU
zzFor connecting the camera to a computer
or printer.
Stereo AV Cable AVC-DC400ST
zzConnect the camera to a TV to enjoy
playback on the larger TV screen.
HDMI Cable HTC-100
zzFor connecting the camera to an HDMI
input of a high-definition TV.
216
Optional Accessories
Remote Switch RS-60E3
zzEnables remote shutter button operation
(pressing the button halfway or all the
way down).
Lens Hood LH-DC60
zzPrevents extraneous light outside the
angle of view from entering the lens and
causing flares or ghosting, which reduce
image quality.
Filter Adapter FA-DC67A
zzAdapter required when mounting a 67
mm filter.
CanoLens Filter (67 mm dia.)
tects the lens and enables a variety of
ooting effects.
• A lens hood and filter adapter cannot be attached to the camera at the same
time.
Printers
Canon PictBridge-Compatible
Printers
zzPrinting images without a computer is
possible by connecting the camera to a
Canon PictBridge-compatible printer. For
details, visit your nearest Canon dealer.
217
Still Images
Movies
Movies
Using Optional Accessories
Still Images
Playback on a TV
By connecting the camera to a TV, you can view your shots on the larger
screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
Still Images
Movies
Playback on a High-Definition TV
Connecting the camera to an HDTV with the HDMI Cable HTC-100 (sold
separately) enables you to view your shots on the larger screen of the TV.
Movies shot at a resolution of [ ] or [ ] can be viewed in high-definition.
1 Make re te camera and TV
aof
2 Cect the camera to the TV.
zzOn the TV, insert the cable plug fully into
the HDMI input as shown.
zzOn the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
3 Turn the TV on and switch to
video input.
zzSwitch the TV input to the video input you
connected the cable to in step 2.
218
Using Optional Accessories
4 Turn the camera on.
zzPress the <1> button to turn the camera
on.
XXImages from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
zzWhen finished, turn off the camera and
TV before disconnecting the cable.
• Camera operating sounds are not played while the camera is connected to
an HDTV.
219
Using Optional Accessories
Still Images
Movies
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
In this case, you will need to adjust some TV settings. For details, refer to
the TV user manual.
1 Configure the setting.
zzPress the <n> button, choose
[Ctrl via HDMI] on the [3] tab, and then
2 Connect thcamera to the TV.
the cama to the TV.
3 ay images.
zzTurn on the TV. On the camera, press the
<1> button.
XXImages from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
4 Control the camera with the TV
remote.
zzPress the <q><r> buttons on the remote
to browse images.
zzTo display the camera control panel,
press the OK/Select button. Select
control panel items by pressing the
<q><r> buttons to choose an item, and
then pressing the OK/Select button again.
220
Using Optional Accessories
Camera Control Panel Options Shown on the TV
Return
Closes the menu.
]
Group Playback
is selected.)
Starts movie playback. (Only displayed when a movie
is selected.)
Play Movie
Slideshow
Starts slideshow playback. To switch images during
playback, press the <q><r> buttons on the remote
control.
.
Index Playback
Change Display
Displays multiple images in an index.
l
• Pressing the <n> button on the camwill switch control to the
camera itself, which will prevent rcontol until you return to single-
image display.
• The camera may not alwaond correctly even if the remote is for an
HDMI CEC-compable TV.
221
Using Optional Accessories
Still Images
Movies
Playback on a Standard-Definition TV
Connecting the camera to a TV with the Stereo AV Cable AVC-DC400ST
(sold separately) enables you to view your shots on the larger screen of the
TV as you control the camera.
1 Make sure the camera and TV
are off.
White
2 Connect the camera to the TV.
Red
Yellow
Yellow
zzOn the TV, insert the cable plugs fully into
the video inputs as shown.
Red
White
zzOn the meraopen the terminal cover
and inshe cable plug fully into the
a trminal.
3 Dilay images.
images.
• Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the <n> button and choose [Video
System] on the [3] tab.
• When the camera and TV are connected, you can also shoot while
previewing shots on the larger screen of the TV. To shoot, follow the same
222
Using Optional Accessories
Still Images
Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC80 (sold separately)
eliminates the need to monitor the remaining battery level.
1 Make sure the camera is off.
2 Open the cover.
memory card/battery cover, and then
open the coupler cable port cover as
shown.
3 Connect the adapter to the
coupler.
zzInshe aapter plug fully into the
cou.
4 Insert the coupler.
zzInsert the coupler as shown until it locks
into place.
223
Using Optional Accessories
zzLower the cover ( ), keeping the coupler
cable in the coupler cable port ( ).
Coupler Cable Port
5 Connect the power cord.
zzInsert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
zzTurn the camera on and use it as desired.
zzWhen finishedturn the camera off and
unplug the poer cord from the outlet.
• Do not disconnect the adar uplug the power cord while
the camera is still on. This rase your shots or damage the
camera.
• Do not attach the adapter or adapter cord to other objects. Doing
so could result in malfunction or damage to the product.
224
Using Optional Accessories
Still Images
Movies
Using a Lens Hood (Sold Separately)
For wide-angle shots of backlit subjects without using the flash, attach
optional Lens Hood LH-DC60 to prevent light outside the angle of view from
entering the lens.
Attach the hood.
zzAlign the lens hood mark ( ) with the
camera mark ( ), and turn the lens hood
in the direction of the arrow until it locks
in place.
zzTo remove the lens hood, turn it the
opposite direction.
zzTo attach the lens hood inverted (as
shown) when the hood is not used, align
the lens hood mark ( ) with the camera
mark ( ), and turn the lens hood in the
direction of the arrow until it locks in
place.
• Vignetting may occur if you use the built-in flash when the lens
hood is attached.
• A lens hood and filter adapter cannot be attached to the camera at the same
time.
225
Using Optional Accessories
Still Images
Using a Remote Switch (Sold Separately)
An optional Remote Switch RS-60E3 can be used to avoid camera shake
that may otherwise occur when pressing the shutter button directly. This
optional accessory is convenient when shooting at slow shutter speeds.
1 Connect the remote switch.
zzMake sure the camera is off.
zzOpen the terminal cover and insert the
remote switch plug.
2 Shoot.
zzTo shoot, presthe release button on the
remote switch
• Bulb photography (lng expores) is not supported.
226
Using Optional Accessories
Still Images
Movies
Using an External Flash (Sold Separately)
More sophisticated flash photography is possible with an optional Speedlite
EX series flash. For movie shooting using an LED light, the optional
Speedlite 320EX flash is available.
• This camera does not support some Speedlite EX series functions.
• Wireless operation of the Speedlite 600EX-RT is not supported.
• Non-EX series Canon flash units may not fire correctly or may not
fire at all, in some cases.
• Use of non-Canon flash units (especially high-voltage flash units)
or flash accessories may prevent normal camera operation and
may damage the camera.
• Also refer to the Speedlite EX series manual for additional information.
Still Images
Movies
Speedlite EX Series
These optional flash unitcan provide bright lighting and meet a variety of
flash photography needs.
1 Attach the flash unit to the hot
shoe.
2 Turn the flash on, and then turn
the camera on.
XXA red [h] icon is now displayed.
XXThe flash pilot lamp will light up when the
flash is ready.
227
Using Optional Accessories
3 Choose shooting mode <G>,
<M>, <B>, or <D>.
zzFlash settings can only be configured in
these modes. In other modes, the flash
is adjusted and fired automatically, as
needed.
4 Set the white balance to [h]
5 Configure the external flash.
zzPress the <n> button, choose [Flash
Control] on the [4] tab, and then press
the <m> button.
XXOptions already set on the flash itself are
displayed.
zzPress <o>p> buttons or turn
th<5dial to choose an item, and
djut the setting by pressing the
<r> buttons.
zzAvailable settings vary depending on the
shooting mode and the flash attached
• Settings for the built-in flash cannot be configured while a Speedlite EX
series flash is attached, because that setting screen is no longer accessible.
• You can also access the setting screen by pressing the <h> button for at
least one second.
• Flash settings in [ ] shooting mode can be configured just as they are in
<G> mode.
• 580EX II only: [Flash Control] is not available if the external flash has been
set up for stroboscopic flash.
• 320EX only: Auto LED lighting is only available in low-light movie recording
or in Movie mode. In this case, the [ ] icon is shown.
228
Using Optional Accessories
Still Images
Movies
Using Speedlite Bracket SB-E2 (Sold Separately)
zzUsing the optional Speedlite Bracket SB-
E2 can help prevent unnatural shadows
next to subjects during vertical shooting.
zzTo keep the LCD screen out of the way
of the bracket, use the screen closed and
facing outward.
Still Images
Camera Settings Available with an External Flash (Sold
Separately)
The following settings are available in <G>, <M>, <B>, or <D> mode.
In other shooting modes, only [Red-Eye Corrand [Red-Eye Lamp] can
be configured. (With autoflash control, the flah always fires.) However,
external flash units do not fire in modat thbuilt-in flash does not fire
Shooting Mode
Item
ptions
G M B D
Auto*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
Flash Mode
Manual*2
–3 to +3
Flash Exp. Comp*3
Flash Output*4
Shutter Sync.
1/128*5 to 1/1 (in 1/3-stop increments)
O
O
O
–
1st-curtain/2nd-curtain/Hi-speed
On
Slow Synchro
Off
Wireless Func.*6
Red-Eye Corr.
Red-Eye Lamp
On/Off
On/Off
On/Off
On
O
O
O
O
O
O
O
O
O
–
Safety FE*7
Off
O
O
Clear Flash Settings*8
229
Using Optional Accessories
*1E-TTL mode is used for the flash.
*2M mode is used for the flash. In [D] shooting mode, E-TTL mode is also available for
the flash. In this case, when the flash fires, flash exposure compensation set on the
flash is applied to the flash output level set on the camera.
*3Can be configured only when [Flash Mode] is [Auto] and flash exposure
compensation set on the flash is [+0]. When you adjust flash exposure compensation
on 600EX-RT, 600EX, 580EX II, or 430EX II Speedlites, the camera display will be
updated accordingly.
*4Can be configured when [Flash Mode] is [Manual]. Linked to settings on the flash
unit.
*51/64 for Speedlite 430EX II/430EX/320EX/270EX II/270EX.
*6For options other than On/Off, configure the setting on the flash unit itself. Not
available with Speedlite 430EX II/320EX/270EX II/270EX. When this setting is set to
[On], [Shutter Sync.] cannot be set to [2nd-curtain]. (If [Shutter Sync.] is set to [2nd-
curtain], it will be changed to [1st-curtain].)
*7Can only be configured when [Flash Mode] is [Auto].
*8Restores all default settings. You can also restore defaults for [Slow Synchro], [Safety
FE], [Red-Eye Corr.], and [Red-Eye Lamp] by using [Reset All] in the [3] menu on
• Flash settings in [ ] shooting mode can be figured just as they are in
<G> mode.
• In <A> shooting mode, iconpresting Smiling, Sleeping, Babies
(Smiling), Babies (Sleeping), adreshooting scenes determined by
the camera are not dislayed, acamera does not shoot continuously
230
Still Images
Movies
Printing Images
Your shots can easily be printed by connecting the camera to a printer. On
the camera, you can specify images to set up batch printing, prepare orders
for photo development services, and prepare orders or print images for
photobooks.
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
Still Images
Easy Print
Easily print your shots by connecting the camera to a PictBridge-compatible
printer (sold separately) with the USB cable.
1 Make sure the camera and
printer are off.
2 Connect he camera to the
prr.
en the cover. Holding the smaller
le plug in the orientation shown, insert
the plug fully into the camera terminal.
zzConnect the larger cable plug to the
printer. For other connection details, refer
to the printer manual.
3 Turn the printer on.
4 Turn the camera on.
zzPress the <1> button to turn the camera
on.
231
Printing Images
XX[
] is displayed.
5 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
6 Print the image.
zzPress the <c> button.
XXPrinting now begins.
zzTo print other images, repeat steps 5 – 6
after pring is finished.
zzWhen are finished printing, turn the
a nd printer off and disconnect the
ice cable.
• RAW images cannot be printed.
232
Printing Images
Still Images
Configuring Print Settings
1 Access the printing screen.
<m> button to access the screen at left.
2 Configure the settings.
zzPress the <o><p> buttons or turn
the <5> dial to choose an item, and
then choose an option by pressing the
<q><r> buttons.
Default
Date
Matches current printer settings.
Prints images with thdate added.
Prints imageth the file number added.
Prints ges ith both the date and file number added.
–
File No.
Both
Off
Default
Off
Matches current printer settings.
–
Uses information from the time of shooting to print under
optimal settings.
On
Red-Eye 1 Corrects red-eye.
No. of Copies Choose the number of copies to print.
–
Cropping
Paper
Settings
Specify the paper size, layout, and other details
–
233
Printing Images
Still Images
Cropping Images Before Printing (Cropping)
By cropping images before printing, you can print a desired image area
instead of the entire image.
1 Choose [Cropping].
access the printing screen, choose
[Cropping] and press the <m> button.
XXA cropping frame is now displayed,
indicating the image area to print.
2 Adjust the cropping frame as
needed.
zzTo resize the fme, move the zoom lever
or turn <5dial.
zzovhe frame, press the
p><q><r> buttons.
zzTo tate the frame, press the <l>
button.
zzWhen finished, press the <m> button.
3 Print the image.
zzOn the screen in step 1, press the
<o><p> buttons or turn the <5> dial
to choose [Print], and then press the
<m> button.
• Cropping may not be possible at small image sizes, or at some
aspect ratios.
• Dates may not be printed correctly if you crop images shot with
[Date Stamp] selected.
234
Printing Images
Still Images
Choosing Paper Size and Layout Before Printing
1 Choose [Paper Settings].
access the printing screen, choose
[Paper Settings] and press the <m>
button.
2 Choose a paper size.
zzPress the <o><p> buttons or turn the
<5> dial to choose an option, and then
press the <m> button.
3 oose a type of paper.
zress the <o><p> buttons or turn the
<5> dial to choose an option, and then
press the <m> button.
4 Choose a layout.
zzPress the <o><p> buttons or turn the
<5> dial to choose an option.
zzWhen choosing [N-up], press the
<q><r> buttons to specify the number of
images per sheet.
zzPress the <m> button.
5 Print the image.
235
Printing Images
Available Layout Options
Default
Matches current printer settings.
Bordered
Borderless
N-up
Prints with blank space around the image.
Borderless, edge-to-edge printing.
Choose how many images to print per sheet.
Prints images for identification purposes.
ID Photo
Only available for images with a resolution of L and an aspect ratio of
4:3.
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Fixed Size
Still Images
Printing ID Photos
1 Choose [ID Photo].
[ho] and press the <m> button.
2 Cse the long and short side
ength.
zzPress the <o><p> buttons or turn the
<5> dial to choose an item. Choose the
length by pressing the <q><r> buttons,
and then press the <m> button.
3 Choose the printing area.
printing area.
4 Print the image.
236
Printing Images
Movies
Printing Movie Scenes
1 Access the printing screen.
to choose a movie, and then press the
<m> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose [c], and then press
the <m> button. The screen at left is
displayed.
2 Choose a printing method.
zzPress the <o><p> buttons or turn
the <5> dial to choose [ ], and then
press the <q><r> buttons to choose the
printg mehod.
3 rinthe image.
Movie Printing Otions
Single
Prints the current scene as a still image.
Prints a series of scenes, a certain interval apart, on a single sheet of
paper. You can also print the folder number, file number, and elapsed
time for the frame by setting [Caption] to [On].
Sequence
• To cancel printing in progress, press the <m> button.
• [ID Photo] and [Sequence] cannot be chosen on Canon PictBridge-
compatible printers from CP720/CP730 and earlier models.
237
Printing Images
Still Images
Adding Images to the Print List (DPOF)
service can be set up on the camera. Choose up to 998 images on a
memory card and configure relevant settings, such as the number of copies,
as follows. The printing information you prepare this way will conform to
DPOF (Digital Print Order Format) standards.
• RAW images cannot be included in print list.
Still Images
Adding Images to the Print List via the <c> Button
You can add images to the print list (DPOF) after your shot or later during
playback simply by pressing the <c> button.
1 Chooan image.
zth<q><r> buttons or turn the
dial to choose an image.
2 Add the image to the print list.
zzPress the <c> button.
zzPress the <o><p> buttons to specify
the number of prints. Choose [Add] by
pressing the <q><r> buttons or turning
the <5> dial, and then press the <m>
button.
zzTo remove the image from the print list,
repeat steps 1 – 2 but choose [Remove]
by pressing the <q><r> buttons or
turning the <5> dial, and then press the
<m> button.
• Print list cannot be set up while the camera is connected to a printer.
238
Printing Images
Still Images
Configuring Print Settings
Specify the printing format, whether to add the date or file number, and
other settings as follows. These settings apply to all images in the print list.
zzPress the <n> button, and then
choose [Print Settings] on the [2] tab.
Choose and configure settings as desired
Standard
Index
One image is printed per sheet.
Smaller versionof multiple images are printed
per sheet.
Print Type
Both
On
Both sd anindex formats are printed.
s ae printed with the shooting date.
Date
Off
On
mages are printed with the file number.
–
File No.
Off
All image print list settings are cleared after
printing.
On
Off
Clear DPOF
data
–
• Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
• Setting [Date] to [On] may cause some printers to print the date
twice.
239
Printing Images
• Specifying [Index] will prevent you from choosing [On] for both [Date] and
[File No.] at the same time.
• Index printing is not available on some Canon PictBridge-compatible printers
(sold separately).
• The date is printed in a format matching setting details in [Date/Time] on the
Still Images
Setting Up Printing for Individual Images
1 Choose [Select Images & Qty.].
zzPress the <n> button, choose
[Select Images & Qty.] on the [2] tab,
and then press the <m> button.
2 osan image.
zzhe <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
XXYou can now specify the number of copies.
zzIf you specify index printing for the image, it
is labeled with a [ ] icon. To cancel index
printing for the image, press the <m>
button again. [ ] is no longer displayed.
3 Specify the number of prints.
zzPress the <o><p> buttons or turn the
<5> dial to specify the number of prints
(up to 99).
zzTo set up printing for other images and specify
the number of prints, repeat steps 2 – 3.
zzPrinting quantity cannot be specified for
index prints. You can only choose which
images to print, by following step 2.
zzWhen finished, press the <n> button
to return to the menu screen.
240
Printing Images
Still Images
Setting Up Printing for a Range of Images
1 Choose [Select Range].
[Select Range] and press the <m>
button.
2 Choose images.
images.
3 Configure the print settings.
zzPress the <o><p> buttons to choose
[Order], and then press the <m> button.
Still Images
Setting Up Printing for l Imges
1 oose [Select All Images].
[Select All Images] and press the <m>
button.
2 Configure the print settings.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
241
Printing Images
Still Images
Clearing All Images from the Print List
1 Choose [Clear All Selections].
[Clear All Selections] and press the <m>
button.
2 Confirm clearing the print list.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
Still Images
Printing Images Added to the Print ist (DPOF)
zzWhen images ave been added to the
is isplayed after you connect
tmera to a PictBridge-compatible
printer. Press the <o><p> buttons to
choose [Print now], and then simply press
the <m> button to print the images in the
print list.
zzAny DPOF print job that you temporarily
stop will be resumed from the next image.
242
Printing Images
Still Images
Adding Images to a Photobook
Photobooks can be set up on the camera by choosing up to 998 images
on a memory card and importing them into the included software on your
computer, where they are stored in their own folder. This is convenient
when ordering printed photobooks online or printing photobooks with your
own printer.
Choosing a Selection Method
zzPress the <n> button, choose
[Photobook Set-up] on the [1] tab, and
then choose how you will select images.
• [ ] may be displayed e cmera to warn you that the memory
card has print settings ere configured on another camera.
Changing the prnt settinsing this camera may overwrite all
previous settings
• After importing images to your computer, also refer to the Software Guide
Still Images
Adding Images Individually
1 Choose [Select].
zzFollowing the previous procedure, choose
[Select] and press the <m> button.
243
Printing Images
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
XX[ ] is displayed.
zzTo remove the image from the photobook,
press the <m> button again. [ ] is no
longer displayed.
zzRepeat this process to specify other images.
zzWhen finished, press the <n> button
to return to the menu screen.
Still Images
Adding All Images to a Photobook
1 Choose [Sect All Images].
e [elect All Images] and press the
button.
2 Configure the print settings.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
Still Images
Removing All Images from a Photobook
1 Choose [Clear All Selections].
choose [Clear All Selections] and press
the <m> button.
2 Confirm clearing the photobook.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
244
Still Images
Movies
Using an Eye-Fi Card
Before using an Eye-Fi card, always confirm that local use is permitted
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card’s user manual
or contact the manufacturer for instructions on preparing and using cards or
resolving transfer problems.
• When using an Eye-Fi card, keep the following points in mind.
- Cards may continue to transmit radio waves even when [Eye-
card before entering hospitals, aircraft, or other areas where
transmission is prohibited.
- When troubleshooting image transfer issues, check the card and
computer settings. For details, refer to the card’s user manual.
- Poor Eye-Fi connections may cause mage transfer to take a long
time, and transfer may be inpted in some cases.
- Eye-Fi cards may becoe hodue to their transfer functions.
- Battery power will be mefaster than in normal use.
- Camera operaton may ome sluggish. To resolve this, try
setting [Eye-Fi tans.to [Disable].
Connection status of Eye-Fi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen (in
simple information display mode).
(Gray)
Not connected
Connecting
Connected
Interrupted
(Blinking white)
(White)
Not communicating
Error acquiring Eye-Fi card
information*2
Transfer in
progress*1
Animated
*2Restart the camera. Repeated display of this icon may indicate a problem with the
card.
Images labeled with a [ ] icon have been transferred.
245
Using an Eye-Fi Card
• Choosing [ ] mode will interrupt the Eye-Fi connection. Although the Eye-Fi
connection will be restored after you choose another shooting mode or enter
Playback mode, the camera may transfer any movies made in [ ] mode
again.
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the connection
status, as needed.
zzPress the <n> button, choose
[Eye-Fi Settings] on the [3] tab, and then
press the <m> button.
zzChoose [Connection info], and then press
the <m> button.
XXThe connectioinformation screen is
displayed.
Disabling Eye-Fi Transfer
Configure the setting as follows to e Eye-Fi transfer by the card, if
necessary.
Choose [Disable] in [Eye-Fi trans.].
zzPress the <n> button, choose
[Eye-Fi Settings] on the [3] tab, and then
press the <m> button.
zzChoose [Eye-Fi trans.], and then choose
[Disable].
• [Eye-Fi Settings] is not shown unless an Eye-Fi card is in the
camera with its write-protect tab in the unlocked position. For this
reason, you cannot change settings for an inserted Eye-Fi card if
the write-protect tab is in the locked position.
246
Troubleshooting
If you think there is a problem with the camera, first check the following. If the items
below do not solve your problem, contact a Canon Customer Support Help Desk.
Power
Nothing happens when the power button is pressed.
• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery a few times.
The battery is depleted quickly.
• Battery performance decreases at low temperatures. Try warming the battery a little
by putting it in your pocket, for example, with the terminal cover on.
• If these measures do not help and the battery is still depleted soon after charging, it
has reached the end of its life. Purchase a new battery.
The lens is not retracted.
• Do not open the memory card/battery cover while te amera is on. Close the cover,
The battery is swollen.
• Battery swelling is normal and does nansafety concerns. However, if battery
swelling prevents the battery fom fitting e camera, contact a Canon Customer
Support Help Desk.
Display on a TV
Shooting
Cannot shoot.
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are
recorded in movies.
•
The screen may flicker and horizontal banding may appear under fluorescent or LED lighting.
No date stamp is added to images.
•
248
Troubleshooting
[h] flashes on the screen when the shutter button is pressed, and
[
] is displayed when the shutter button is pressed halfway.
• Mount the camera on a tripod or take other measures to keep it still. In this case, you
Shots are out of focus.
• Press the shutter button halfway to focus on subjects before pressing it all the way
• Confirm that unneeded functions such as macro ae deactivated.
No AF frames are displayed anthe mera does not focus when the
shutter button is pressed ha
• To have AF frames displayd and tmera focus correctly, try composing the
shot with higher-contrast sbject areas centered before you press the shutter button
halfway. Otherwise, try pressng he shutter button halfway repeatedly.
Subjects in shots look too dark.
Subjects look too bright, highlights are washed-out.
• Reduce the lighting on subjects.
• Adjust brightness by using flash exposure compensation or changing the flash output
249
Troubleshooting
Subjects in flash shots look too bright, highlights are washed-out.
• Adjust brightness by using flash exposure compensation or changing the flash output
White dots or similar image artifacts appear in flash shots.
• This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
lamp. Also try increasing the lighting in indoor scenes and shooting at closer range.
Recording to the memory card takes too long, or cotinuous shooting is slower.
Shooting settings or FUNC. menttis are not available.
• Available setting items vary by shootie. Refer to “Functions Available in Each
The Babies or Children icodos not display.
• The Babies and Children icons will not display if the birthday is not set in face
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
•
Use the camera to format the memory card, or switch to a card that supports high-speed
recording. Note that even if the elapsed time display is incorrect, the length of movies on
automatically.
The camera’s internal memory buffer filled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
250
Troubleshooting
Zooming is not possible.
modes.
Subjects look distorted.
• Subjects that pass in front of the camera quickly may look distorted. This is not a
malfunction.
Playback
Playback is not possible.
• Image or movie playback may not be possible if a computer is used to rename files or
structure and file names.
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
• There may be brief interruptions when playing moes copied to memory cards that
have slow read speeds.
• When movies are played on a computer, es mabe dropped and audio may skip
if computer performance is inadeque.
Sound is not played during m.
sound in the movie is faint.
because audio is not recorded in these modes.
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
• Press the <1> button to enter Playback mode. Hold the <n> button down as
you press the <o> and <m> buttons at the same time. On the next screen, press
the <q><r> buttons to choose [B], and then press the <m> button.
Eye-Fi Cards
251
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
Memory card locked
• The write-protect tab of the memory card is set to the locked position. Switch the
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
•
If the same error message is displayed even when you have inserted a formatted memory
Insufficient space on card
No Image.
• The memory card does not cotain any images that can be displayed.
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back AVI/RAW
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shuffle/
Cannot rotate/Cannot modify image/Cannot register this image!/
Cannot modify/Cannot assign to category/Unselectable image./No
identification information
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
252
On-Screen Messages
Invalid selection range
attempted to choose an initial image that was after the final image, or vice-versa.
Exceeded selection limit
less.
correctly. Reduce the number of selected images and try again.
Communication error
• An excessive amount of images (approx. 1,000) on the memory card prevented
printing or image transfer to a computer. To transfthe images, use a commercially
available USB card reader. To print, insert the mory card directly into the printer
card slot.
Naming error!
• The folder could not be created or could not be recorded, because the highest
supported folder number (99) for simages on the card has been reached and
the highest supported imagnumber (9999) for images in folders has been reached.
Lens Error
• This error may occur if the lens is held while it is moving, or when the camera is used
in dusty or sandy locations.
• Frequent display of this error message may indicate camera damage. In this case,
contact a Canon Customer Support Help Desk.
A camera error was detected (error number)
• If this error message is displayed immediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
• Frequent display of this error message may indicate camera damage. In this case,
write down the error number (Exx) and contact a Canon Customer Support Help
Desk.
File Error
images that have been altered using computer software, even if the camera is
connected to the printer.
253
On-Screen Messages
Print error
setting is correct, restart the printer and complete the setting on the camera again.
Ink absorber full
• Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
254
On-Screen Information
Shooting (Information Display)
The same information is shown on the viewfinder.
Battery level
Camera orientation*
White balance
AEB shooting
Drive mode
Eye-Fi connection
Metering method
Redabshots
Movie quality
Remaining time
Digital zoom
magnification
tele-converter
Focusing range
Shooting mode
Flash mode
Red-eye correction
Flash exposure
compensation
output level
Spot AE point frame
Date stamp
Still image
compression
255
On-Screen Information
White balance
MF indicator
Shutter speed
Mercury lamp
Buffer warning
Electronic level
Camera shake
Image stabilization
Aperture value
Exposure shift bar
Microphone level
Exposure
compensation level
Blink detection
Exposure level
Exposure
compensation bar
*
: Regular orientation,
: Held vertically
The camera detects the shooting orientation and adjuss settings for optimal shots.
Orientation is also detected during playback, and in iter orientation, the camera
automatically rotates images as needed.
However, the orientation may not be detected ectly when the camera is pointed
straight up or down.
Battery Level
An on-screen icon or message indcates the battery charge level.
Display
Details
Sufficient charge
Slightly depleted, but sufficient
(Blinking red)
Nearly depleted—charge the battery soon
Depleted—charge the battery immediately
[Charge the battery]
256
On-Screen Information
Playback (Detailed Information Display)
Switch display (RGB
My Category
Metering method
Folder number - File
Current e no/
Totano. mages
Sspeed (still
Image quality /
Frame rate (movies)
Aperture value
Compression (image
Resolution
(movies)
Grouped image
Image editing
Exposure
compensation level
White balance
balance correction
lamp correction
Red-eye correction
Shooting date/time
Flash exposure
compensation
output level
Playback speed
Shooting mode
Transferred via Eye-
Battery level
Focusing range
File size
Still images:
Group playback
Movies: Playback
time
257
On-Screen Information
• Some information may not be displayed when viewing images on a TV
Exit
Play
Slow Motion (To adjust the playback speed, press the <q><r> buttons or turn
the <5> dial. No sound is played.)
keep holding down the <m> button.)
Previous Frame (For fast-rewind, keep holding down the <m> button.)
Next Frame (For fast-forward, keep holding dothe <m> button.)
holding down the <m> button.
Shown when the camera is connected to a PictBridge-compatible printer
c
* Displays the frame approx. 4 sec. before or after the current frame.
• During movie playback, you can skip back or forward (or to the previous or
next chapter) by pressing the <q><r> buttons.
258
Handling Precautions
•
•
The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic fields, which may cause malfunction or
erase image data.
•
•
•
•
If water droplets or dirt adheres to the camera or screen, wipe with a dry
soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
Never use cleaners containing organic solvents to clean the camera or
screen.
Use a blower brush to remove dust from the lens. If cleaning is difficult,
contact a Canon Customer Support Help Desk.
To prevent condensation from forming on the camera after sudden
temperature changes (when the camera is transferred from cold to warm
environments), put the camera in an airtight, resealable plastic bag and
let it gradually adjust to the temperature before removing it from the bag.
•
If condensation does form on the cameraop using it immediately.
Continuing to use the camera in thte my damage it. Remove the
battery and memory card, anait til the moisture has evaporated
before resuming use.
259
Functions and Menu Tables
Functions Available in Each Shooting Mode
Shooting Mode
DBMGA
Function
*1
*1
–
–
–
O
O
O
O
O
*1
*1
*1
*1
O
O
O
O
O
O
O
–
O
O
O
–
O
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
–
][$
Delay*2
O
O
O
O
O
O
O
O
O
O
O
–
*1
*1
*1
*1
–
–
Shots*3
*1
–
–
–
–
O
O
–
*5
–
–
–
–
–
–
O
–
*1
*1
*1
*1
–
*1
*1
–
–
O
–
–
–
–
–
O
O
–
O
O
–
O
–
O
O
–
O
–
–
O
O
–
–
–
O
O
–
O
O
–
–
–
O
O
–
h
Z
!
–
O
O
O
–
O
O
–
O
O
–
–
–
–
–
–
–
O
O
O
O
O
O
O
AF Lock (when assigned to the
*1
*1
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
O
–
O
–
e
–
–
*1
*1
*1
*1
–
–
O
O
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
*1
O
*1
*1 Options vary depending on the assigned shooting mode. *2 Cannot be set to 0
seconds in modes without selection of the number of shots. *3 One shot (cannot be
modified) in modes without selection of the number of shots.
260
Functions and Menu Tables
K
E
T
x
v
O
I
Pt
E
Y
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
O
–
–
–
–
–
O
–
–
–
–
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
O
*5
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
–
–
O
–
O
–
O
–
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
O
–
O
O
O
–
–
O
O
O
O
O
O
O
–
O
O
–
O
O
O
–
O
O
–
O
O
O
–
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
O
–
O
O
O
–
O
O
–
O
O
O
–
O
O
–
–
–
–
–
O
–
–
–
–
O
–
–
–
–
O
–
–
–
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
–
–
–
–
–
–
O
–
O
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
O
O
O
O
O
–
O
O
–
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
–
O
Available or set automatically. Not available.
*4 Set to [!] when the flash is down, but otherwise selection is possible when the flash is up.
*5 Not available, but switches to [Z] in some cases. *6 FE lock not available in [!]
flash mode.
261
Functions and Menu Tables
FUNC. Menu
Shooting Mode
DBMGA
Function
*1
*1
*1
*1
*1
*1
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
–
O
–
–
–
O
h
*1
*1
*1
*1
–
O
O
O
O
O
O
O
O
O
O
O
–
O
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
*1
*1
*1
*1
*1
*1
O
O
O
–
–
–
*2
*2
–
–
–
–
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
–
O
O
O
–
*3
*3
*1
*1
*1
*1
*1
*1
O
–
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
–
–
–
O
*1
–
*1
*1
*1
–
*1
*1
O
–
O
–
O
–
O
–
O
O
–
O
–
O
–
–
–
O
O
O
O
O
O
O
O
5
*
–
–
O
*1 Options vary depending on the assigned shooting mode.
*2 Not available in [x] or [v].
*3 White balance is not available.
*4 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and
skin tone.
*5 [ ] is set with [
], AF lock, or [t].
262
Functions and Menu Tables
K
E
x
v
T
E
Y
I
Pt
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
–
O
–
O
–
O
–
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
O
Available or set automatically. Not available.
263
Functions and Menu Tables
Shooting Mode
DBMGA
Function
*1
*1
*1
*1
–
–
–
–
–
O
O
O
O
O
–
O
–
O
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
–
O
O
O
–
*1
*1
*1
*1
–
–
O
O
O
O
O
O
O
O
O
–
O
–
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
*1
*1
–
–
–
O
O
O
O
O
O
O
O
O
O
*1
*1
*1
–
*1
*1
*1
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
*1 Options vary depending on the assigned shooting mode.
*2 Only [ ] and [ ] are available.
264
Functions and Menu Tables
K
E
x
v
–
T
E
Y
I
Pt
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
*2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
O
O
O
–
O
O
O
O
O
O
O
–
O
–
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
*3
*3
–
–
O
–
–
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
–
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
–
–
O
–
O
Available or set automatically. Not available.
265
Functions and Menu Tables
4Shooting Menu
Shooting Mode
DBMGA
Function
Face Detect*1
O
O
O
O
O
O
O
O
O
O
O
O
O
*3
O
–
O
*2
*2
*2
*2
*2
*2
–
O
O
Tracking AF
FlexiZone/Center*4
–
*2
*2
*2
*2
*2
*2
–
O
–
Standard
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
Off
Digital Tele-converter (1.5x/2.0x)
*2
*2
*2
*2
–
O
–
O
On
O
O
O
O
O
O
O
O
O
O
Off
*2
*2
*2
–
O
–
O
On
O
O
O
O
O
O
O
O
O
–
Off*5
*2
*2
*2
On
O
O
O
O
O
O
O
O
O
–
O
–
O
–
Off
*2
*2
*2
*2
–
O
On
O
O
O
O
O
O
O
O
O
O
O
O
Off
*2
*2
*2
*2
–
O
–
O
–
O
On
O
O
O
O
O
O
O
O
Off
On
Off
*2
*2
*2
*2
–
O
–
O
O
O
O
O
O
O
O
O
O
O
*1 Operation when no faces are detected varies by shooting mode.
*2 Options vary depending on the assigned shooting mode.
*4 [FlexiZone] in G, M, B, and Dmodes, otherwise [Center].
*5 [On] when subject movement is detected in <A> mode.
266
Functions and Menu Tables
K
E
x
v
T
E
Y
I
Pt
–
–
O
–
–
O
–
–
O
–
–
–
O
O
O
O
–
–
O
–
–
O
–
–
O
–
–
O
O
O
O
–
–
O
O
O
O
–
–
O
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
–
O
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
–
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
Available or set automatically. Not available.
267
Functions and Menu Tables
Shooting Mode
DBMGA
Function
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
Auto
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
O
O
O
O
O
O
O
O
–
–
–
O
–
O
O
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
O
Flash Mode
Manual
Flash Exp. Comp
Flash Output
O
O
O
O
O
O
O
–
1st-curtain
2nd-curtain
Shutter Sync.
On
Red-Eye Corr.
Off
On
Red-Eye Lamp
Off
On
Safety FE
Off
O
Max ISO Speed
Rate of Change
Standard/High/Low
On/Off
*1
*1
*1
*
–
–
–
–
–
–
O
O
O
–
O
O
O
O
*1
–
–
–
–
–
O
–
O
–
O
–
O
–
–
–
O
Center
AF Point
*1
*1
*1
*1
–
–
–
–
O
O
O
O
O
O
O
O
O
–
On
Off
*1
*1
*1
*1
–
O
–
O
–
O
–
O
–
O
O
O
O
O
Mic Level
Level
*1
*1
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Wind Filter
*1 Options vary depending on the assigned shooting mode.
268
Functions and Menu Tables
K
E
x
v
T
E
Y
I
Pt
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
–
–
O
–
O
O
O
O
O
–
O
–
–
–
O
–
O
–
–
–
O
–
O
O
O
O
O
–
O
–
–
–
O
–
O
O
O
O
O
–
O
–
–
–
O
–
O
O
O
O
O
–
O
–
–
–
O
–
O
O
O
O
O
–
O
–
–
–
O
–
O
O
O
O
O
–
O
–
–
–
O
–
O
–
–
–
O
–
O
–
–
–
O
–
O
–
–
–
O
–
O
–
–
–
O
–
O
–
–
–
O
–
O
–
–
–
O
–
O
–
–
–
O
–
O
–
–
–
O
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
Available or set automatically. Not available.
269
Functions and Menu Tables
Shooting Mode
DBMGA
Function
Off/Quick/2 – 10 sec./Hold
Off
Detailed/Focus Check
On
*1
*1
O
O
O
O
O
O
O
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
*1
*1
*1
*1
–
O
O
O
O
O
O
O
O
O
O
O
O
O
Off
Shooting Info
Grid Lines
Electronic Level
Histogram
*1
*1
*1
*1
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
On
Off
*1
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Off
*1
*1
*1
*1
*1
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
–
O
O
O
O
O
O
O
IS Mode
Continuous
ShooOnly
1
2
Dynamic IS
*1
*1
Large/Medium/Small
Off
Date / Date & Time
On/Off
O
O
O
O
O
O
O
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
*1
*1
*1
*1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Destination
–
–
–
C1/C2
O
O
O
O
O
O
*1 Options vary depending on the assigned shooting mode.
], but they will be recorded in still images.
[
displayed in [E], [ ], or [ ], and they will not be recorded in movies.
270
Functions and Menu Tables
K
E
x
v
T
E
Y
I
Pt
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
–
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
Available or set automatically. Not available.
271
Functions and Menu Tables
3Set up Menu
Item
Ref. Page
Item
Lens Retract
Ref. Page
Mute
Volume
Power Saving
Units
Sound Options
Hints & Tips
Date/Time
Electronic Level
Video System
Ctrl via HDMI
Eye-Fi Settings
Time Zone
LCD Brightness
Start-up Image
ight Ifo
Format
ertfication Logo Display
Language
File Numbering
Create Folder
Reset All
My Menu Menu
Item
Ref. Page
My Menu settings
272
Functions and Menu Tables
1Playback Menu
Item
Movie Digest Playback
Smart Shuffle
Slideshow
Ref. Page
Item
Ref. Page
Red-Eye Correction
Cropping
Resize
Erase
My Colors
Protect
Face ID Info
Scroll Display
Group Images
uto Rtate
Resume
Rotate
Favorites
My Category
Photobook Set-up
i-Contrast
Transition
2Print Menu
Item
Ref. Page
Item
Select All Images
Clear All Selections
Print Settings
Ref. Page
–
Print
Select Images & Qty.
Select Range
273
Specifications
Camera Effective
Pixels (Max.)
Approx. 12.1 megapixels
50x zoom: 4.3 (W) – 215.0 (T) mm
(35mm film equivalent: 24 (W) – 1200 (T) mm)
LCD Viewfinder
Lens Focal Length
Viewfinder
Effective Pixels: Approx. 202,000 dots (67,000 x 3)
Dioptric Adjustment Range: –5.0 to +4.0 m-1 (dpt)
2.8 type color TFT LCD
Effective Pixels: Approx. 461,000 dots
Design rule for Camera File system, DPOF (version 1.1)
compliant
LCD Monitor
File Format
Still Images: Exif 2.3 (JPEG), RAW (CR2 (Canon Original))
Movies: MOV (Image data: H.264; Audio data: Linear PCM
(stereo))
Data Type
Hi-speed USB
HDMI output
Interface
Analog audio output (monaural)
Analog video output (NTSC/PAL)
Battery Pack NB-10L
Power Source
AC Adapter Kit ACK-DC0
Dimensions (Based
on CIPA Guidelines)
122.5 x 87.3 x 1.5 m4.82 x 3.44 x 4.15 in.)
Approx. 595 g . 21.0 oz.; including the battery and
memorcard)
Approx. 551 g approx. 19.4 oz.; camera body only)
Weight (Based on
CIPA Guidelines)
Number of Shots/Recording Time, Playback Time
Number of Shots
Screen On
Viewfinder On
Screen On
Viewfinder On
Screen On
Approx. 315
Approx. 335
Movie Recording
Time*1
Approx. 1 hour, 15 minutes
Approx. 1 hour, 20 minutes
Approx. 2 hours, 25 minutes
Approx. 2 hours, 30 minutes
Approx. 7 hours
Continuous
Shooting*2
Viewfinder On
Playback Time
*1Time under default camera settings, when normal operations are performed, such as
shooting, pausing, turning the camera on and off, and zooming.
*2Time available when shooting the maximum movie length (until recording stops
automatically) repeatedly.
• The number of shots that can be taken is based on measurement guidelines of the
Camera & Imaging Products Association (CIPA).
• Under some shooting conditions, the number of shots and recording time may be less
than mentioned above.
• Number of shots/time with a fully charged battery.
274
Specifications
Number of 4:3 Shots per Memory Card
Number of Shots per Memory Card
(Approx. shots)
Compression
Ratio
Recording Pixels
8 GB
32 GB
1379
5568
(Large)
12M/4000x3000
2192
2431
8850
9814
(Medium 1)
6M/2816x2112
3721
15020
30040
52176
110150
165225
7442
(Medium 2)
2M/1600x1200
12927
27291
40937
(Small)
0.3M/640x480
RAW Images
12M/4000x3000
—
446
1804
• The values in the table are measured according o anon standards and may change
depending on the subject, memory card mersettings.
• The values in the table are based o:3 act ratio. If the aspect ratio is changed
than with 4:3 images. Howver, sin16:9 images have a setting of 1920 x 1080
pixels, their data size will blarger than 4:3 images.
Recording Time per Memory Card
Recording Time per Memory Card
Image Quality
8 GB
32 GB
29 min. 39 sec.
1 hr. 59 min. 43 sec.
42 min. 11 sec.*1
2 hr. 50 min. 19 sec.*2
1 hr. 28 min. 59 sec.
5 hr. 59 min. 10 sec.
• The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
• Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 29 minutes and 59 seconds when shooting in
[
] or [ ], and approximately 1 hour when shooting in [ ].
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.
275
Specifications
Flash Range
50 cm – 5.5 m (1.6 ft. – 18 ft.)
1.4 m – 3.0 m (4.6 ft. – 9.8 ft.)
Maximum wide angle (j)
Maximum telephoto (i)
Shooting Range
Maximum Wide
Angle (j)
0 cm (0 in.) – infinity 1.3 m (4.3 ft.) – infinity
Maximum Telephoto
(i)
Shooting Mode Focusing Range
–
A
–
1 m (3.3 ft.) – infinity 13 m (43 ft.) – infinity
5 cm (2.0 in.) – infinity 1.3 m (4.3 ft.) – infinity
0 cm (0 in.) –
–
*
Other modes
e
50 cm (1.6 ft.)
*
f
0 cm (0 in.) – infinity 1.3 m (4.3 ft.) – infinity
* Not available in some shooting modes.
Continuous Shooting Speed
Shooting Mode
Continuous Sng
Speed
Approx. 2.2 shots/sec.
Approx. 0.8 shots/sec.
G
Approx. 0.9 shots/sec.
Approx. 13 shots/sec.
W
Shutter Speed
1 – 1/2000 sec.
<A> mode, automatically set range
15, 13, 10, 8, 6, 5, 4, 3.2, 2.5, 2, 1.6, 1.3, 1,
0.8, 0.6, 0.5, 0.4, 0.3, 1/4, 1/5, 1/6, 1/8, 1/10,
1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50, 1/60,
1/80, 1/100, 1/125, 1/160, 1/200, 1/250, 1/320,
1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250,
1/1600, 1/2000
<M> mode available values (sec.)
276
Specifications
Aperture
f/number
f/3.4 – f/8.0 (W), f/6.5 – f/8.0 (T)
f/3.4, f/4.0, f/4.5, f/5.0, f/5.6, f/6.3, f/6.5, f/7.1,
f/8.0
<B> mode available values*
* Depending on the zoom position, some aperture values may not be available.
Battery Pack NB-10L
Type:
Rechargeable lithium-ion battery
7.4 V DC
920 mAh
Rated Voltage:
Rated Capacity:
Charging Cycles:
Approx. 300 times
Operating Temperature: 0 – 40 °C (32 – 104 °F)
Dimensions:
Weight:
32.5 x 45.4 x 15.1 mm (1.28 x 1.79 x 0.59 in.)
Approx. 41 g (approx. 1.45 oz.)
Battery Charger CB-2LC/CB-2LCE
Rated Input:
100 – 240 V AC (50/60 Hz16 VA (100 V) – 22 VA (240 V),
0.18 A (100 V) – 0.A (2V)
8.4 V DC, 0.7 A
Rated Output:
Charging Time:
Charge Indicator:
Approx. 1 50 n. (when using NB-10L)
Charging: / Flly charged: green
Operating Temperature: 5 – 40 °C (44 °F)
Dimensions:
Weight:
92.x 63.0 x 27.0 mm (3.65 x 2.48 x 1.06 in.)
CB-2LC: Approx. 80 g (approx. 2.82 oz.)
CB-2LCE: Approx. 74 g (approx. 2.61 oz.) (excluding power
cord)
Lens Hood LH-DC60 (Sold Separately)
Camera Mount:
Bayonet
Max. Diameter x Length: ϕ69.6 x 27.0 mm (ϕ2.74 x 1.06 in.)
Weight:
Approx. 10 g (approx. 0.35 oz.)
•
•
All data is based on tests by Canon.
Camera specifications or appearance are subject to change without
notice.
277
Index
Custom white balance ....................... 123
A
AC adapter kit.................................... 223
Accessories ....................................... 215
AEB mode ..........................................119
AE lock ...............................................115
AF lock............................................... 140
Aspect ratio.......................................... 73
AV cable ............................................ 218
Av (shooting mode) ........................... 151
D
Date/time
Adding date stamps ...................... 61
Changing....................................... 20
Date/time battery........................... 20
World clock.................................. 200
Defaults Reset all
DIGITAL CAMERA Solution Disk........... 2
Digital tele-converter.......................... 132
Digital zoom......................................... 55
DPOF................................................. 238
B
Batteries Date/time battery
Battery
Charging........................................ 15
Level............................................ 256
E
diting
Cropping...................................... 190
i-Contrast..................................... 192
Red-eye correction...................... 193
Resizing images.......................... 188
C
C1/C2 (shooting mode) ..................... 156
Erasing .............................................. 179
Error messages ................................. 252
Exposure
Camera
Reset all .......................................211
Camera shake ................................... 147
FE lock ........................................ 144
Clock.................................................... 44
Color Accent (shooting mode) ............. 98
Color (white balance)......................... 122
Compression ratio (image quality)..... 147
Continuous shooting.......................... 127
F
Face detect (AF frame mode)............ 133
Face select ........................................ 139
Face self-timer (shooting mode)........ 104
Favorites............................................ 184
High-speed burst HQ
(shooting mode) .......................... 106
Creative filters (shooting mode)........... 92
278
Index
FE lock............................................... 144
File numbering................................... 205
Flash
Image quality
Compression ratio (image quality)
Images
Display period ............................... 83
Playback Viewing
Flash exposure compensation .... 144
On ............................................... 142
Slow synchro............................... 143
Indicator............................................... 44
ISO speed...........................................117
FlexiZone (AF frame mode)............... 134
Focus bracketing ............................... 141
Focus check ...................................... 165
Focusing
L
Lamp.................................................... 82
AF frames.................................... 133
AF lock ........................................ 140
AF-point zoom............................... 80
Face select.................................. 139
Servo AF ..................................... 137
M
Macro (focus mode)........................... 129
Magnified display............................... 172
Focusing range
Menu
Macro .......................................... 129
Basic operations............................ 42
FUNC. menu
Metering method.................................116
Monochrome (shooting mode)............. 98
Movie Digest (shooting mode)............. 86
Movies
G
Grid lines ........................................... 154
H
Editing ......................................... 194
Image quality
(resolution/frame rate)................... 77
Handheld nightscene
(shooting mode)................................... 89
High dynamic range (shooting mode).. 93
High-speed burst HQ
(shooting mode)................................. 106
M (shooting mode)............................. 152
Multi-area White Balance .................... 76
My Category ...................................... 185
Household power............................... 223
I
N
Neck strap Strap
279
Index
Servo AF............................................ 137
Shadow Correct................................. 121
Shooting
P
Photobook set-up .............................. 243
Playback Viewing
Shooting date/time Date/time
Poster effect (shooting mode) ............. 92
Slideshow .......................................... 173
Smart Shuffle..................................... 174
Smart Shutter (shooting mode) ......... 102
Smile (shooting mode)....................... 102
Snow (shooting mode)......................... 90
Soft focus (shooting mode).................. 97
Software
Power AC adapter kit
Battery
Compact power adapter
Printing .............................................. 231
Program AE ........................................114
Protecting .......................................... 175
P (shooting mode) ..............................114
DIGITAL CAMERA Solution Disk .... 2
R
RAW .................................................. 146
Rotating ............................................. 182
Super slow motion movie
Super vivid (shooting mode)................ 92
T
S
TV display.......................................... 218
Tv (shooting mode)............................ 150
Screen
Display language........................... 21
Menu FUNC. menu, Menu
SD/SDHC/SDXC memory cards
Memory cards
Searching .......................................... 166
Self-timer ............................................. 58
V
2-second self-timer........................ 59
Customizing the self-timer............. 59
Face self-timer
(shooting mode) .......................... 104
Wink self-timer
Image search .............................. 166
Index display ............................... 166
Magnified display ........................ 172
(shooting mode) .......................... 103
280
Index
Slideshow.................................... 173
Smart Shuffle .............................. 174
TV display ................................... 218
W
White balance (color)......................... 122
Widescreen (resolution)....................... 74
Wink self-timer (shooting mode)........ 103
Z
Zoom framing assist ............................ 56
281
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Battery Charger CB-2LC
IMPORTANT SAFETY INSTRUCTIONS-
SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug adapter of the
proper configuration for the power outlet, if needed.
Battery Charger CB-2LCE
The adapter can be used with a power supply between 100 and 240 V AC.
Contact your Canon dealer for information about plug adapter for overseas use.
For U.S.A. customers only: For areas where 120 V AC power is not used, you will
need a special plug adapter.
For only United States
Use a UL listed, 1.8-3m(6-10ft), Type SPT-2 oPT-2, AWG no.18 power supply
cord, rated for 125V 7A, with a non-poNEMA 1-15P plug rated for 125V 15A.
USA and Canadonly:
The Lithium ion/plymebattery that powers the product is recyclable.
Please call 1-800-8-BATTERY for information on how to recycle this
battery.
282
FCC Notice
(Digital Camera, Model PC1817 systems)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class
B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipmet ad receiver.
• Connect the equipment into an outlet on cuit dferent from that to which the
receiver is connected.
• Consult the dealer or an experiedioTV technician for help.
The cable with the ferrite cre providith the digital camera must be used with this
equipment in order to complwith Class B limits in Subpart B of Part 15 of the FCC
rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you could
be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
To ensure proper operation of this product, use of genuine Canon
accessories is recommended.
For CA, USA only
Included lithium battery contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
283
Trademark Acknowledgments
•
•
•
The SDXC logo is a trademark of SD-3C, LLC.
This device incorporates exFAT technology licensed from Microsoft.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
•
The iFrame logo and the iFrame symbol are trademarks of Apple Inc.
About MPEG-4 Licensing
This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and
non-commercial purpose or (2) by a video provider licensed under the AT&T
patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.
* Notice displayed in English as required.
Disclaimer
•
•
•
•
Reprinting, transmitting, or storing in a ieval system any part of this
guide without the permission of Cnon rohibited.
Canon reserves the right to chae cntents of this guide at any time
without prior notice.
Illustrations and screenshos in his guide may differ slightly from the
actual equipment.
The above items notwithstanding, Canon accepts no liability for damages
due to mistaken operation of the products.
284
285
CDD-E492-010
©CANON INC. 2012
|
York Affinity Bhp024 User Manual
Xerox Docucolor M128 User Manual
Xerox Docucolor 250 User Manual
Trendnet Automobile Parts Trendnet User Manual
Sharp Mx Fn13 User Manual
MAKITA HU01 User Manual
LG 55LB6300 User Manual
HITACHI 57X500 User Manual
Defiant Timer User Manual
CRAFTSMAN 390.291558 User Manual