Model:HW54235
PLEASE READ AND SAVE THESE INSTRUCTIONS
WARNING: To reduce risk of fire, electric shock or injury to persons:
● Unplug or disconnect the appliance from the power supply before servicing.
●Do not use this fan with any solid-state speed control device.
CAUTION: The pillar part or the tower fan base is made of one piece, which is located on the
end of the main body. The base of this fan is made of two parts, located at the bottom of the box.
PACKAGE CONTENTS
PART
DESCRIPTION
MAIN BODY
QUANTITY
A
B
C
D
E
1
1
1
1
1
1
FIXED BOLT
BASE 1
BASE 2
TRIANGLE NUT(Preassembled)
REMOTE CONTROL
F
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 5-10 minutes.
ASSEMBLY INSTRUCTIONS
CAUTION: Never operate the fan without base 1(C)and base 2(D)assembled. Operate the fan only
in upright position; any other position could create a hazardous situation.
1.Pass the power cord on main body(A)down the power cord channel between the base 1(C)and
base 2(D)(See Fig.3).
2.Clockwise rotate down the triangle nut(E)from fixed bolt(B)(See Fig.2).Snap the base 1(C)and
base 2(D)together (See Fig.1)and fasten triangle nut(E)by rotating counterclockwise to fixed
bolt(B)on main body(A)(See Fig.3).
REMOTE CONTROL INSTRUCTION
HOW TO INSERT BATTERIES (SOLD SEPARATELY)
CAUTION: Remove the batteries if the remote control (F) is not to be used for a month or more.
Batteries left in the unit may leak and cause damage.
DO NOT MIX OLD AND NEW BATTERIES.DO NOT MIX ALKALINE, STANDARD CARBON-ZINC OR
RECHARGEABLE (NICKEL-CADMIUM) BATTERIES.PLEASE DISPOSE OF BATTERIES PROPERLY.
Using the remote control (F):
1. The buꢀons of the remote control (F) funcꢁon in the same manner as the buꢀons on the
control panel located on the top of the fan.
2. The remote control (F) can be used to up to 19 ſt (6 m) away from the fan. Point the remote
control (F) directly at the front of the fan to ensure proper communicaꢁon.
3. A “beep” from the fan will sound and lights on the control panel illuminate when the tower fan
accepts instrucꢁons from the remote control (F).
Instrucꢁons for storage of Remote Control:
To store remote, push cover of storage compartment down and insert. To remove remote, repeat
the above step and take out.
OPERATION INSTRUCTIONS
Timer Switch
3 Fan Modes Switch
Power Switch
3 Speed Fan Switch
Oscillaꢁng Switch
All the features of this fan can be controlled from the control pad or remote control (F)
To Turn the Fan On/Off:
Gently press the “
o
turn fan on. Press
To Set the Fan Spe
Gently press the “
e
you press the “ ” bM
and HIGHT seꢂng
Oscillaꢁng Operaꢁ
This fan is designe
”
buꢀon on the “OSn
a second ꢁme.
To Set the Fan mo
Gently press the “
” buꢀon on the control pad or “MODE” on the remote control(F) once to
set “nature” mode (the gusts you feel like natural wind blows outdoor); press it twice to set
“sleeping” mode (the wind is gentle and most suitable for sleeping), and three ꢁmes to set it to
“normal”(the wind is more stable than “nature” and “sleep”).
To Set Timer Operation:
This fan is equipped with a timer that ranges from 1-9 hours. To set the fan to automatically turn
it off after a scheduled amount of time, simply press the “TIMER” button on the remote control
(F)
trol pad.
Tht of the fan will display the time you have set .Each light
reancel timer operation, press the button unit all the time lights
dis
CA
1
○outlet and allow the fan to completely stop before cleaning.
2
○enter into fan housing.
3
○ed with a mild soap solution.
4
○s a cleaner: gasoline, thinner, or benzene.
5
○, do not try to repair the fan yourself; it may result in a fire
ha
FA
Wason, keep it in a safe, dry location, protected from dust.
USGE.
TR
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The fan is not operating.
No electric power.
Check the power cord to make
sure it is plugged into an outlet.
Put(2) AAA batteries (not
included) into remote control
The remote control does not No batteries.
work.
RE
P
F
|