Notebook PC
E-Manual
15.6”: X551 Series
14.0”: X451 Series
Table of Contents
Function keys................................................................................................................... 36
Notebook PC E-Manual
3
Windows® 8 lock screen ...........................................................................................44
Windows® UI ................................................................................................................45
Start screen....................................................................................................................... 45
Working with Windows® apps...............................................................................49
Closing apps..................................................................................................................... 50
Bluetooth .......................................................................................................................... 61
Connecting to wired networks.............................................................................64
Turning your Notebook PC off..............................................................................67
ꢁ
Notebook PC E-Manual
Troubleshoot...............................................................................................................81
Network Compatibility Declaration......................................................................... 89
IC Radiation Exposure Statement for Canada ...................................................... 94
REACH................................................................................................................................. 99
Macrovision Corporation Product Notice.............................................................. 99
Prevention of Hearing Loss......................................................................................... 99
Notebook PC E-Manual
ꢂ
ꢃ
Notebook PC E-Manual
About this manual
This manual provides information about the hardware and software
features of your Notebook PC, organized through the following
chapters:
Chapter 1: Hardware Setup
This chapter details the hardware components of your Notebook
PC.
Chapter 2: Using your Notebook PC
This chapter shows you how to use the different parts of your
Notebook PC.
Chapter 3: Working with Windows® 8
This chapter provides an overview of using Windows® 8 in your
Notebook PC.
Chapter 4: Power-on Self-test (POST)
This chapter shows you how to use POST to change the settings
of your Notebook PC.
Appendices
This section includes notices and safety statements for your
Notebook PC.
Notebook PC E-Manual
ꢄ
Conventions used in this manual
To highlight key information in this manual, some text are presented as
follows:
IMPORTANT! This message contains vital information that must be
followed to complete a task.
NOTE: This message contains additional information and tips that can
help complete tasks.
WARNING! This message contains important information that must be
followed to keep you safe while performing tasks and prevent damage to
your Notebook PC's data and components.
Icons
The icons below indicate the devices you can use for completing a
series of tasks or procedures on your Notebook PC.
= Use the touchpad.
= Use the keyboard.
Typography
Bold
= This indicates a menu or an item that must be selected.
= This indicates sections that you can refer to in this manual.
Italic
8
Notebook PC E-Manual
Safety precautions
Using your Notebook PC
This Notebook PC should only be used in
environments with ambient temperatures between
ꢂ°C (ꢁ1°F) and 3ꢂ°C (ꢅꢂ°F).
Refer to the rating label on the bottom of your
Notebook PC and ensure that your power adapter
complies with this rating.
Do not leave your Notebook PC on your lap or near
any part of your body to prevent discomfort or
injury from heat exposure.
Do not use damaged power cords, accessories, and
other peripherals with your Notebook PC.
While powered on, ensure that you do not carry or
cover your Notebook PC with any materials that can
reduce air circulation.
Do not place your Notebook PC on uneven or
unstable work surfaces.
You can send your Notebook PC through x-ray
machines (used on items placed on conveyor belts),
but do not expose them to magnetic detectors and
wands.
Contact your airline provider to learn about related
inflight services that can be used and restrictions
that must be followed when using your Notebook
PC in-flight.
Notebook PC E-Manual
ꢅ
Caring for your Notebook PC
Disconnect the AC power and remove the battery
pack (if applicable) before cleaning your Notebook
PC. Use a clean cellulose sponge or chamois cloth
dampened with a solution of nonabrasive detergent
and a few drops of warm water. Remove any extra
moisture from your Notebook PC using a dry cloth.
Do not use strong solvents such as thinners,
benzene, or other chemicals on or near your
Notebook PC.
Do not place objects on top of your Notebook PC.
Do not expose your Notebook PC to strong
magnetic or electrical fields.
Do not use or expose your Notebook PC near
liquids, rain, or moisture.
Do not expose your Notebook PC to dusty
environments.
Do not use your Notebook PC near gas leaks.
10
Notebook PC E-Manual
Proper disposal
Do not throw your Notebook PC in municipal waste.
This product has been designed to enable proper
reuse of parts and recycling. The symbol of the
crossed out wheeled bin indicates that the product
(electrical, electronic equipment and mercury-
containing button cell battery) should not be
placed in municipal waste. Check local regulations
for disposal of electronic products.
Do not throw the battery in municipal waste. The
symbol of the crossed out wheeled bin indicates
that the battery should not be placed in municipal
waste.
Notebook PC E-Manual
11
1ꢀ
Notebook PC E-Manual
Microphone
The built-in microphone can be used for video conferencing,
voice narrations, or simple audio recording.
Camera indicator
The camera indicator lights up when the built-in camera is in use.
Camera
The built-in camera allows you to take pictures or record videos
using your Notebook PC.
Display panel
This high-definition display panel provides excellent viewing
features for photos, videos, and other multimedia files on your
Notebook PC.
Power button
Press the power button to turn your Notebook PC on or off. You
can also use the power button to put your Notebook PC to sleep
or hibernate mode and wake it up from sleep or hibernate mode.
In the event that your Notebook PC becomes unresponsive,
press and hold the power button for about four (ꢁ) seconds until
your Notebook PC shuts down.
Numeric keypad*
The numeric keypad toggles between these two functions: for
numeric input and as pointer direction keys.
NOTE: For more details, refer to the Numeric keypad* section in
this manual.
Notebook PC E-Manual
1ꢂ
Keyboard
The keyboard provides full-sized QWERTY keys with a
comfortable travel depth for typing. It also enables you to use
the function keys, allows quick access to Windows®, and controls
other multimedia functions.
NOTE: The keyboard layout differs by model or territory.
Touchpad
The touchpad allows the use of multi-gestures to navigate
onscreen, providing an intuitive user experience. It also simulates
the functions of a regular mouse.
NOTE: For more details, refer to the Gestures for the touchpad
section in this manual.
Status indicators
The status indicators help identify the current hardware status of
your Notebook PC.
Power indicator
The power indicator lights up when the Notebook PC
is turned on and blinks slowly when the Notebook
PC is in sleep mode.
1ꢃ
Notebook PC E-Manual
Two-color battery charge indicator
The two-color LED provides a visual indication of the
battery’s charge status. Refer to the following table
for details.
Color
Status
Solid Green
The Notebook PC is plugged to
a power source and the battery
power is between ꢅꢂ% and
100%.
Solid Orange
The Notebook PC is plugged
to a power source, charging its
battery, and the battery power
is less than ꢅꢂ%.
Blinking Orange
Lights off
The Notebook PC is running on
battery mode and the battery
power is less than 10%.
The Notebook PC is running on
battery mode and the battery
power is between 10% to 100%.
Notebook PC E-Manual
1ꢄ
Drive activity indicator
This indicator lights up when your Notebook PC is
accessing the internal storage drives.
Bluetooth / Wireless indicator
This indicator lights up when your Notebook PC’s
wireless function (Bluetooth or Wi-Fi) is enabled.
Number lock indicator*
This indicator lights up when the number lock
function is activated. This allows you to use some of
the keys on your keyboard for numeric input.
Capital lock indicator
This indicator lights up when the capital lock
function is activated. Using capital lock allows you
to type capitalized letters (such as A, B, C) using your
Notebook PC’s keyboard.
* on selected models only
18
Notebook PC E-Manual
Bottom
NOTE: The bottom side may vary in appearance depending on model.
WARNING! The bottom of the Notebook PC can get warm to hot while in
use or while charging the battery pack. When working on your Notebook
PC, do not place it on surfaces that can block the vents.
IMPORTANT! Battery time varies by usage and by the specifications for
this Notebook PC. The battery pack cannot be disassembled.
Air vents
The air vents allow cool air to enter and warm air to exit the
Notebook PC.
WARNING! Ensure that paper, books, clothing, cables, or other
objects do not block any of the air vents or else overheating may
occur.
Notebook PC E-Manual
1ꢅ
Right Side
Optical drive
Your Notebook PC’s optical drive may support several disc
formats such as CDs, DVDs, recordable discs, or rewritable discs.
Optical disc drive eject button
Press this button to eject the optical drive tray.
Optical disc drive manual eject hole
The manual eject hole is used to eject the drive tray in case the
electronic eject button does not work.
WARNING! Use the manual eject hole only when the electronic
eject button does not work.
NOTE: For more details, refer to the Using the optical drive
section in this manual.
Kensington® security slot
The Kensington® security slot allows you to secure your
Notebook PC using Kensington® compatible Notebook PC
security products.
ꢀ0
Notebook PC E-Manual
Left Side
Power (DC) input port
Insert the bundled power adapter into this port to charge the
battery pack and supply power to your Notebook PC.
WARNING! The adapter may become warm to hot while in use.
Do not cover the adapter and keep it away from your body while
it is connected to a power source.
IMPORTANT! Use only the bundled power adapter to charge
the battery pack and supply power to your Notebook PC.
Air vents
The air vents allow cool air to enter and warm air to exit the
Notebook PC.
WARNING! Ensure that paper, books, clothing, cables, or other
objects do not block any of the air vents or else overheating may
occur.
LAN port
Insert the network cable into this port to connect to a local area
network.
Notebook PC E-Manual
ꢀ1
VGA port
This port allows you to connect your Notebook PC to an
external display.
HDMI port
This port is for the HDMI (High-Definition Multimedia Interface)
connector and is HDCP compliant for HD DVD, Blu-ray, and
other protected content playback.
USB 2.0 port
This USB (Universal Serial Bus) port is compatible with USB ꢀ.0
or USB 1.1 devices such as keyboards, pointing devices, flash
disk drives, external HDDs, speakers, cameras and printers.
USB 3.0 port
The USB (Universal Serial Bus) 3.0 port provides a transfer rate
of up to ꢂ Gbit/s and are backward compatible to USB ꢀ.0.
Headphone output/microphone input combo jack port
This port allows you to connect your Notebook PC to amplified
speakers or headphones. You can also use this port to connect
your Notebook PC to an external microphone.
ꢀꢀ
Notebook PC E-Manual
ꢀꢁ
Notebook PC E-Manual
Getting started
Charge your Notebook PC.
A.
Plug the AC power adapter into a 100V~ꢀꢁ0V power source.
B.
Connect the DC power connector into your Notebook PC’s power
(DC) input.
Charge the Notebook PC for 3 hours before using it in
battery mode for the first time.
IMPORTANT!
•
•
•
Ensure that your Notebook PC is connected to a grounded
power adapter before turning it on for the first time.
When using your Notebook PC on power adapter mode, the
socket outlet must be near to the unit and easily accessible.
Locate the input/output rating label on your Notebook
PC and ensure that it matches the input/output rating
information on your power adapter. Some Notebook PC
models may have multiple rating output currents based on
the available SKU.
ꢀꢃ
Notebook PC E-Manual
NOTE:
Power adapter information:
•
•
•
•
Input voltage: 100-ꢀꢁ0Vac
Input frequency: ꢂ0-ꢃ0Hz
Rating output current: 1.ꢄꢂA (33W) or ꢀ.3ꢄA (ꢁꢂW)
Rating output voltage: 1ꢅV
WARNING!
Read the following precautions for your Notebook PC’s battery.
•
Only ASUS-authorized technicians should remove the battery
inside the device.
•
The battery used in this device may present a risk of fire or
chemical burn if removed or disassembled.
•
•
•
•
•
•
•
Follow the warning labels for your personal safety.
Risk of explosion if battery is replaced by an incorrect type.
Do not dispose of in fire.
Never attempt to short-circuit your Notebook PC’s battery.
Never attempt to dissamble and reassemble the battery.
Discontinue usage if leakage is found.
The battery and its components must be recycled or disposed
of properly.
•
Keep the battery and other small components away from
children.
Notebook PC E-Manual
ꢀꢄ
Gestures for the touchpad
Gestures allow you to launch programs and access the settings of your
Notebook PC. Refer to the following illustrations when using hand
gestures on your touchpad.
Moving the pointer
You can tap or click anywhere on the touchpad to activate its pointer,
then slide your finger on the touchpad to move the pointer onscreen.
Slide horizontally
Slide vertically
Slide diagonally
Notebook PC E-Manual
ꢀꢅ
One-finger gestures
Tap/Double tap
•
•
In the Start screen, tap an app to launch it.
In Desktop mode, double-tap an application to launch it.
Drag and drop
Double-tap an item, then slide the same finger without lifting it off the
touchpad. To drop the item to its new location, lift your finger from the
touchpad.
30
Notebook PC E-Manual
Left-click
Right-click
•
•
In the Start screen, click an
app to launch it.
•
•
In the Start screen, click an
app to select it and launch
the settings bar. You can also
press this button to launch
the All Apps bar.
In Desktop mode, double-
click an application to
launch it.
In Desktop mode, use this
button to open the right-
click menu.
NOTE: The areas inside the dotted line represent the locations of the left
mouse button and the right mouse button on the touchpad.
Notebook PC E-Manual
31
Top edge swipe
•
•
In the Start screen, swipe from the top edge to launch the All
Apps bar.
In a running app, swipe from the top edge to view its menu.
Left edge swipe
Right edge swipe
Swipe from the left edge to shuffle Swipe the right edge to launch
your running apps. the Charms bar.
3ꢀ
Notebook PC E-Manual
Two-finger gestures
Tap
Rotate
Tap two fingers on the touchpad To rotate an image, place two
to simulate the right-click
function.
fingers on the touchpad then
turn one finger clockwise or
counterclockwise while the other
stays still.
Two-finger scroll (up/down)
Two-finger scroll (left/right)
Slide two fingers to scroll up or
down.
Slide two fingers to scroll left or
right.
Notebook PC E-Manual
33
Zoom out
Zoom in
Bring together your two fingers on Spread apart your two fingers on
the touchpad.
the touchpad.
Drag and drop
Select an item then press and hold the left button. Using your other
finger, slide down the touchpad to drag and drop the item to a new
location.
3ꢁ
Notebook PC E-Manual
Three-finger gestures
Swipe up
Swipe down
Swipe three fingers upward to
show all running applications.
Swipe three fingers downward to
show the Desktop mode.
Notebook PC E-Manual
3ꢂ
Using the keyboard
Function keys
The function keys on your Notebook PC’s keyboard can trigger the
following commands:
Puts the Notebook PC into Sleep mode
Turns Airplane mode on or off
NOTE: When enabled, the Airplane mode disables all
wireless connectivity.
Decreases display brightness
Increases display brightness
Turns the display panel off
Activates the second screen
NOTE: Ensure that the second display is connected to
your Notebook PC.
Enables or disables the touchpad
Turns the speaker on or off
3ꢃ
Notebook PC E-Manual
Turns the speaker volume down
Turns the speaker volume up
Function keys for ASUS Apps
Your Notebook PC also comes with a special set of function keys that
can be used to launch ASUS apps.
Toggles the ASUS Splendid Video Enhancement
Technology app to switch between these display
color enhancement modes: Gamma Correction, Vivid
Mode, Theater Mode, Soft Mode, My Profile, and
Normal.
Launches the ASUS LifeFrame app
Launches the ASUS PowerꢁGear Hybrid app
Notebook PC E-Manual
3ꢄ
Windows®8 keys
There are two special Windows® keys on your Notebook PC’s keyboard
used as below:
Press this key to go back to the Start screen. If you are
already in the Start screen, press this key to go back to
the last app you opened.
Press this key to simulate the right-click functions.
Multimedia control keys*
The multimedia control keys allow you to control multimedia files, such
as audios and videos, when played in your Notebook PC.
Press
in combination with the arrow keys on your Notebook PC,
illustrated as below.
Stop
Skip to
previous
track or
rewind
Skip to
next track
or fast
Play or
pause
forward
38
Notebook PC E-Manual
Using the optical drive
NOTE: The actual location of the electronic eject button may vary
depending on your Notebook PC model.
Inserting an optical disc
1.
While the Notebook PC is
on, press the electronic eject
button to partially eject the
optical drive tray.
ꢀ.
3.
Gently pull out the drive tray.
IMPORTANT! Be careful not
to touch the optical drive lens.
Ensure that there are no objects
that may get jammed under the
drive tray.
Hold the disc by the edge,
with its printed side up, then
gently place it inside the hub.
ꢁ0
Notebook PC E-Manual
ꢁ.
Push down the disc’s plastic
hub until it snaps onto the
optical drive hub.
ꢂ.
Push the drive tray gently to
close the optical drive.
NOTE: While data is being
read, it is normal to hear some
spinning and vibrating in the
optical drive.
Manual eject hole
The manual eject hole is located on the optical drive door and is used to
eject the optical drive tray in case the electronic eject button does not
work.
To manually eject the optical drive tray, insert a straightened paper clip
into the manual eject hole until the drive tray opens.
WARNING! Use the manual eject hole only when the electronic eject
button does not work.
Notebook PC E-Manual
ꢁ1
ꢁꢀ
Notebook PC E-Manual
Starting for the first time
When you start your computer for the first time, a series of screens
appear to guide you in configuring the basic settings of your Windows®
8 operating system.
To start your Notebook PC for the first time:
1.
ꢀ.
3.
ꢁ.
Press the power button on your Notebook PC. Wait for a few
minutes until the setup screen appears.
From the setup screen, pick a language to use on your Notebook
PC.
Carefully read the License Terms. Tick I accept the terms for
using Windows then click Accept.
Follow the onscreen instructions to configure the following basic
items:
•
•
•
•
•
Keep your PC secure
Personalize
Wireless
Settings
Sign in to your PC
ꢂ.
After configuring the basic items, the Windows®8 tutorial appears.
Watch this to learn more about Windows®8 functionalities.
Windows® 8 lock screen
The Windows®8 lock screen may appear when your Notebook PC enters
the Windows®8 operating system. To proceed, tap on the lock screen or
press any key on your Notebook PC's keyboard.
ꢁꢁ
Notebook PC E-Manual
Windows® UI
Windows® 8 comes with a tile-based user interface (UI) which allows
you to organize and easily access Windows® apps from the Start screen.
It also includes the following features that you can use while working
on your Notebook PC.
Start screen
The Start screen appears after successfully signing in to your user
account. It helps organize all the applications you need in just one
place.
Zoom in/out button
Windows® Apps
These are apps pinned on the Start screen and displayed on tiled-format
for easy access.
NOTE: Some apps require signing in to your Microsoft account before
they are fully launched.
Notebook PC E-Manual
ꢁꢂ
Hotspot
Action
upper left corner
Hover your mouse pointer on the upper left
corner then tap on the recent app’s thumbnail
to revert back to that running app.
If you launched more than one app, slide
down to show all running apps.
lower left corner
From a running app screen:
Hover your mouse pointer on the lower
left corner then tap on the Start screen’s
thumbnail to go back to the Start screen.
NOTE: You can also press the Windows key
on your keyboard to go back to the
Start screen.
From the Start screen:
Hover your mouse pointer on the lower
left corner then tap on the running app’s
thumbnail to go back to that app.
Notebook PC E-Manual
ꢁꢄ
Hotspot
top side
Action
Hover your mouse pointer on the top side
until it changes to a hand icon. Drag then
drop the app to a new location.
NOTE: This hotspot function only works on
a running app or when you want to use the
Snap feature. For more details, refer to the
Snap feature under Working with Windows®
apps.
upper or lower right Hover your mouse pointer on the upper or
corner
lower right corner to launch the Charms bar.
ꢁ8
Notebook PC E-Manual
Working with Windows® apps
Use your Notebook PC’s touchpad, or keyboard to launch, customize,
and close apps.
Launching apps
Position your mouse pointer over the app then left-click
or tap once to launch it.
Press
twice then use the arrow keys to browse
to launch an app.
through the apps. Press
Customizing apps
You can move, resize, unpin, or close apps from the Start screen using
the following steps:
Moving apps
Double-tap on the app then drag and drop the app to a
new location.
Resizing apps
Right-click on the app to activate its settings bar then
tap or
or
.
Notebook PC E-Manual
ꢁꢅ
Unpinning apps
Right-click on the app to activate the settings bar then
tap
.
Closing apps
1.
Move your mouse pointer on the top side of the
launched app then wait for the pointer to change
to a hand icon.
ꢀ.
Drag then drop the app to the bottom of the
screen to close it.
From the running app’s screen, press
.
ꢂ0
Notebook PC E-Manual
Accessing the Apps screen
Aside from the apps already pinned on your Start screen, you can also
open other applications through the Apps screen.
Horizontal scroll bar
Launching the Apps screen
Launch the Apps screen using your Notebook PC's touchpad or
keyboard.
Swipe from the top edge to launch the All Apps bar.
From the Start screen, press
All Apps icon then press
to select the
.
Notebook PC E-Manual
ꢂ1
Pinning more apps on the Start screen
You can pin more apps on the Start screen using your touchpad.
1.
Position the mouse pointer over the app you
want to pin on the Start screen.
ꢀ.
3.
Right-click on the app to activate its settings.
Tap on the
icon.
ꢂꢀ
Notebook PC E-Manual
Charms bar
The charms bar is a toolbar that can be triggered on the right side
of your screen. It consists of several charms that allow you to share
applications and provide quick access for customizing the settings of
your Notebook PC.
Charms bar
Launching the charms bar
NOTE: When called out, the charms bar initially appears as a set of
white icons. The image above shows how the charms bar looks like once
activated.
Use your Notebook PC’s touchpad, or keyboard to launch the charms
bar.
Move your mouse pointer on the upper or lower right
corner of the screen.
Press
Notebook PC E-Manual
ꢂ3
Inside the charms bar
Search
This charm allows you to look for files, applications, or
programs in your Notebook PC.
Share
This charm allows you to share applications via social
networking sites or email.
Start
This charm reverts the display back to the Start screen.
From the Start screen, you can also use this to revert back
to a recently opened app.
Devices
This charm allows you to access and share files with
the devices attached to your Notebook PC such as an
external display or printer.
Settings
This charm allows you to access the PC settings of your
Notebook PC.
ꢂꢁ
Notebook PC E-Manual
Using Snap
Use your Notebook PC’s touchpad, or keyboard to activate and use
Snap.
1.
ꢀ.
Launch the app you wish to snap.
Hover the mouse point on the top side of your
screen.
3.
ꢁ.
Once the pointer changes to a hand icon, drag
then drop the app to the left or right side of the
display panel.
Launch another app.
1.
ꢀ.
3.
ꢁ.
Launch the app you wish to snap.
Press
.
Launch another app.
To switch between apps, press
.
ꢂꢃ
Notebook PC E-Manual
Other keyboard shortcuts
Using the keyboard, you can also use the following shortcuts to help
you launch applications and navigate Windows®8.
Switches between the Start screen and the last
running app
\
Launches the desktop
Launches the Computer window on Desktop
mode
Opens the File charm
Opens the Share charm
Opens the Settings charm
Opens the Devices charm
Activates the Lock screen
Minimizes the Internet Explorer window
Notebook PC E-Manual
ꢂꢄ
Opens the Second screen pane
Opens the Apps search pane
Opens the Run window
Opens Ease of Access Center
Opens the Settings charm
Opens a menu box of Windows® tools
Launches the magnifier icon and zooms in
your screen
Zooms out your screen
Opens the Narrator Settings
Enables the print screen function
ꢂ8
Notebook PC E-Manual
Connecting to wireless networks
Wi-Fi
Access emails, surf the Internet, and share applications via social
networking sites using your Notebook PC’s Wi-Fi connection.
IMPORTANT! The Airplane mode disables this feature. Ensure that
Airplane mode is turned off before enabling the Wi-Fi connection of your
Notebook PC.
Enabling Wi-Fi
Activate Wi-Fi in your Notebook PC using the following steps on your
touchpad.
1.
ꢀ.
3.
Launch the Charms bar.
Tap and tap
Select an access point from the list of available Wi-Fi connections.
.
Notebook PC E-Manual
ꢂꢅ
ꢁ.
ꢂ.
Tap Connect to start the network connection.
NOTE: You may be prompted to enter a security key to activate the Wi-Fi
connection.
If you want to enable sharing between your Notebook PC and
other wireless-enabled systems, tap Yes, turn on sharing and
connect to devices. Tap No, don't turn on sharing or connect
to devices if you do not want to enable the sharing function.
ꢃ0
Notebook PC E-Manual
Bluetooth
Use Bluetooth to facilitate wireless data transfers with other Bluetooth-
enabled devices.
IMPORTANT! The Airplane mode disables this feature. Ensure that
Airplane mode is turned off before enabling the Bluetooth connection of
your Notebook PC.
Pairing with other Bluetooth-enabled devices
You need to pair your Notebook PC with other Bluetooth-enabled
devices to enable data transfers. To do this, use your touchpad as
follows:
1.
ꢀ.
3.
Launch the Charms bar.
Tap
then tap Change PC Settings.
Under PC Settings, select Devices then tap Add a Device to
search for Bluetooth-enabled devices.
Notebook PC E-Manual
ꢃ1
ꢁ.
Select a device from the list. Compare the passcode on your
Notebook PC with the passcode sent to your chosen device. If
they are the same, tap Yes to successfully pair your Notebook PC
with the device.
NOTE: For some bluetooth-enabled devices, you may be prompted to
key in the passcode of your Notebook PC.
ꢃꢀ
Notebook PC E-Manual
Airplane mode
The Airplane mode disables wireless communication, allowing you to
use your Notebook PC safely while in-flight.
Turning Airplane mode on
1.
ꢀ.
3.
Launch the Charms bar.
Tap and tap
.
Move the slider to the right to turn the Airplane
mode on.
Press
.
Turning Airplane mode off
1.
ꢀ.
3.
Launch the Charms bar.
Tap and tap
.
Move the slider to the left to turn the Airplane
mode off.
Press
.
NOTE: Contact your airline provider to learn about related inflight services
that can be used and restrictions that must be followed when using your
Notebook PC in-flight.
Notebook PC E-Manual
ꢃ3
Connecting to wired networks
You can also connect to wired networks, such as local area networks
and broadband Internet connection, using your Notebook PC’s LAN
port.
NOTE: Contact your Internet Service Provider (ISP) for details or
your network administrator for assistance in setting up your Internet
connection.
To configure your settings, refer to the following procedures.
IMPORTANT! Ensure that a network cable is connected between your
Notebook PC’s LAN port and a local area network before performing the
following actions.
Configuring a dynamic IP/PPPoE network
connection
1.
ꢀ.
Launch Desktop.
From the Windows® taskbar, right-click the network
icon
then tap Open Network and Sharing
Center.
3.
ꢁ.
In the Network and Sharing Center window, tap
Change adapter settings.
Right-click on your LAN then select Properties.
ꢃꢁ
Notebook PC E-Manual
ꢂ.
ꢃ.
Tap Internet Protocol Version 4(TCP/IPv4) then
tap Properties.
Tap Obtain an IP address automatically then tap
OK.
NOTE: Proceed to the next steps if you are using PPPoE connection.
ꢄ.
Return to the Network and Sharing Center
window then tap Set up a new connection or
network.
8.
ꢅ.
Select Connect to the Internet then tap Next.
Tap Broadband (PPPoE).
10. Type your User name, Password, and Connection
name then tap Connect.
11. Tap Close to finish the configuration.
1ꢀ. Tap
on the taskbar then tap the connection
you just created.
13. Type your user name and password then tap
Connect to start connecting to the Internet.
Notebook PC E-Manual
ꢃꢂ
Configuring a static IP network connection
1.
Repeat steps 1 to ꢂ under Configuring a dynamic
IP/PPPoE network connection.
ꢀ
Tap Use the following IP address.
3.
Type the IP address, Subnet mask and Default
gateway from your service provider.
ꢁ.
If needed, you can also type the preferred DNS
server address and alternate DNS server address
then tap OK.
ꢃꢃ
Notebook PC E-Manual
Turning your Notebook PC off
You can turn off your Notebook PC by doing either of the following
procedures:
•
Tap
from the Charms bar then tap
> Shut down to do a normal shutdown.
•
•
From the log-in screen, tap
> Shut
down.
You can also shut down your Notebook PC using
Desktop mode. To do this, launch the desktop
then press alt + f4 to launch the Shut Down
window. Select Shut Down from the drop-down
list then select OK.
•
If your Notebook PC is unresponsive, press
and hold the power button for at least four (ꢁ)
seconds until your Notebook PC turns off.
Putting your Notebook PC to sleep
To put your Notebook PC on Sleep mode, press the power button once.
You can also put your Notebook PC to sleep mode using
Desktop mode. To do this, launch the desktop then press
alt + f4 to launch the Shut Down window. Select Sleep
from the drop-down list then select OK.
Notebook PC E-Manual
ꢃꢄ
ꢃ8
Notebook PC E-Manual
The Power-on Self Test (POST)
The Power-on Self Test (POST) is a series of software-controlled
diagnostic tests that run when you turn on or restart your Notebook PC.
The software that controls the POST is installed as a permanent part of
the Notebook PC’s architecture.
Using POST to access BIOS and Troubleshoot
During POST, you can access the BIOS settings or run troubleshooting
options using the function keys of your Notebook PC. You may refer to
the following information for more details.
BIOS
The Basic Input and Output System (BIOS) stores system hardware
settings that are needed for system startup in the Notebook PC.
The default BIOS settings apply to most conditions of your Notebook
PC. Do not change the default BIOS settings except in the following
circumstances:
•
•
An error message appears onscreen during system bootup and
requests you to run the BIOS Setup.
You have installed a new system component that requires further
BIOS settings or updates.
WARNING: Using inappropriate BIOS settings may result to system
instability or boot failure. We strongly recommend that you change the
BIOS settings only with the help of a trained service personnel.
Accessing BIOS
Restart your Notebook PC then press
during POST.
ꢄ0
Notebook PC E-Manual
BIOS Settings
NOTE: The BIOS screens in this section are for reference only. The actual
screens may differ by model and territory.
Boot
This menu allows you to set your boot option priorities. You may refer to
the following procedures when setting your boot priority.
1.
On the Boot screen, select Boot Option #1.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main
Advanced Boot
Security
Save & Exit
Sets the system
boot order
Boot Configuration
Fast Boot
[Enabled]
Launch CSM
[Disabled]
Driver Option Priorities
Boot Option Priorities
Boot Option #1
: Select Screen
: Select Item
→←
↑↓
[Windows Boot Manager]
Enter: Select
+/— : Change Opt.
F1
F9
: General Help
: Optimized Defaults
Add New Boot Option
Delete Boot Option
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Notebook PC E-Manual
ꢄ1
ꢀ.
Press
and select a device as the Boot Option #1.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main
Advanced Boot
Security
Save & Exit
Boot Configuration
Fast Boot
Sets the system
boot order
[Enabled]
Launch CSM
[Disabled]
Driver Option Priorities
Boot Option #1
Boot Option Prioritie
Boot Option #1
: Select Screen
: Select Item
→←
↓
Windows Boot Manager
ter: Select
— : Change Opt.
Disabled
F9
: General Help
: Optimized Defaults
Add New Boot Option
Delete Boot Option
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
ꢄꢀ
Notebook PC E-Manual
Security
This menu allows you to set up the administrator and user password
of your Notebook PC. It also allows you to control the access to your
Notebook PC’s hard disk drive, input/output (I/O) interface, and USB
interface.
NOTE:
•
If you install a User Password, you will be prompted to input
this before entering your Notebook PC's operating system.
•
If you install an Administrator Password, you will be
prompted to input this before entering BIOS.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced Boot Security Save & Exit
Main
Set Administrator
Password. The
password length
must be in the
following range:
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup. If ONLY
the user’s password is set, then this is a
power on password and must be entered to boot
or enter Setup. In Setup, the User will have
Administrator rights.
Minimum length 3
Maximum length 20
Administrator Password Status
User Password Status
NOT INSTALLED
NOT INSTALLED
Administrator Password
User Password
HDD Password Status :
Set Master Password
Set User Password
I/O Interface Security
System Mode state
Secure Boot state
Secure Boot Control
Key Management
NOT INSTALLED
: Select Screen
: Select Item
Enter: Select
→←
↑↓
+/— : Change Opt.
User
F1
F9
: General Help
: Optimized Defaults
F10 : Save & Exit
ESC : Exit
Enabled
[Enabled]
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Notebook PC E-Manual
ꢄ3
To set the password:
1.
On the Security screen, select Administrator Password or User
Password.
ꢀ.
3.
Type in a password then press
.
Re-type to confirm the password then press
.
To clear the password:
1.
On the Security screen, select Administrator Password or User
Password.
ꢀ.
3.
Type in the current password then press
.
Leave the Create New Password field blank then press
.
ꢁ.
Select Yes in the confirmation box then press
.
ꢄꢁ
Notebook PC E-Manual
I/O Interface Security
In the Security menu, you can access I/O Interface Security to lock
or unlock some interface functions of your Notebook PC.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Security
If Locked, LAN
controller will
be disabled.
I/O Interface Security
LAN Network Interface
Wireless Network Interface
HD AUDIO Interface
[UnLock]
[UnLock]
[UnLock]
USB Interface Security
LAN Network Interface
: Select Screen
: Select Item
→←
↑↓
Lock
Enter: Select
+/— : Change Opt.
UnLock
F1
F9
: General Help
: Optimized
Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
To lock an interface:
1.
ꢀ.
On the Security screen, select I/O Interface Security.
Select an interface you would like to lock then press
.
3.
Select Lock.
Notebook PC E-Manual
ꢄꢂ
USB Interface Security
Through the I/O Interface Security menu, you can also access USB
Interface Security to lock or unlock ports and devices.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Security
If Locked, all
USB device will
be disabled
USB Interface Security
USB Interface
[UnLock]
External Ports
CMOS Camera
Card Reader
[UnLock]
[UnLock]
[UnLock]
USB Interface
: Select Screen
: Select Item
nter: Select
→←
↓
Lock
UnLock
+/— : Change Opt.
F1
F9
: General Help
: Optimized
Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
To lock the USB interface:
1.
On the Security screen, select I/O Interface Security > USB
Interface Security.
ꢀ.
Select an interface that you would like to lock then select
Lock.
NOTE: Setting the USB Interface to Lock also locks and hides the
External Ports and other devices included under USB Interface Security.
ꢄꢃ
Notebook PC E-Manual
Set Master Password
In the Security menu, you can use Set Master Password to set up
a password-enabled access to your hard disk drive.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main
Advanced
Boot Security
Save & Exit
Password Description
Set HDD Master
If ONLY the Administrator’s password is
set,then this only limits access to Setup
and is only asked for when entering Setup.
If ONLY the user’s password is set, then
this is a power on password and must be
entered to boot or enter Setup. In Setup,
the User will have Administrator rights.
Password.
***Advisable to
Power Cycle System
after Setting Hard
Disk Passwords***
Administrator Password Status NOT INSTALLED
User Password Status
Administrator Password
User Password
NOT INSTALLED
NOT INSTALLED
: Select Screen
: Select Item
Enter: Select
→←
↑↓
HDD Password Status :
Set Master Password
Set User Password
+/— : Change Opt.
F1
F9
: General Help
: Optimized
I/O Interface Security
Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
To set the HDD password:
1.
ꢀ.
On the Security screen, select Set Master Password.
Type in a password then press
.
3.
ꢁ.
Re-type to confirm the password then press
.
Select Set User Password then repeat the previous steps to
set up the user password.
Notebook PC E-Manual
ꢄꢄ
Save & Exit
To keep your configuration settings, select Save Changes and Exit
before exiting the BIOS.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main
Advanced
Boot
Security Save & Exit
Exit system setup
after saving the
changes.
Save Changes and Exit
Discard Changes and Exit
Save Options
Save Changes
Discard Changes
Restore Defaults
Boot Override
Windows Boot Manager
: Select Screen
: Select Item
→←
↑↓
Enter: Select
+/— : Change Opt.
Launch EFI Shell from filesystem device
F1
F9
: General Help
: Optimized Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
ꢄ8
Notebook PC E-Manual
To update the BIOS:
1.
Verify the Notebook PC’s exact model then download the latest
BIOS file for your model from the ASUS website.
ꢀ.
3.
Save a copy of the downloaded BIOS file to a flash disk drive.
Connect your flash disk drive to your Notebook PC.
ꢁ.
ꢂ.
Restart your Notebook PC then press
during POST.
From the BIOS menu, Select Advanced > Start Easy Flash, then
press
.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced
Boot
Security
Save & Exit
Press Enter to run
the utility to
select and update
BIOS.
Start Easy Flash
Internal Pointing Device
Wake on Lid Open
[Enabled]
[Enabled]
[Enabled]
Power Off Energy Saving
SATA Configuration
Graphics Configuration
Intel (R) Anti-Theft Technology Corporation
USB Configuration
Network Stack
: Select Screen
: Select Item
→←
↑↓
Enter: Select
+/— : Change Opt.
F1
F9
: General Help
: Optimized Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Notebook PC E-Manual
ꢄꢅ
ꢃ.
Locate your downloaded BIOS file in the flash disk drive then
press
.
ASUSTek Easy Flash Utility
FLASH TYPE: MXIC 25L Series
New BIOS
Platform: Unknown
Current BIOS
Platform: X451/X551
Version: 101
Version: Unknown
Build Date: Unknown
Build Time: Unknown
Build Date: Oct 26 2012
Build Time: 11:51:05
FSO
FS1
FS2
FS3
FS4
0 EFI
<DIR>
[←→]: Switch [↑↓]: Choose [q]: Exit [Enter]: Enter/Execute
ꢄ.
After the BIOS update process, select Exit > Restore Defaults to
restore the system to its default settings.
80
Notebook PC E-Manual
Troubleshoot
By pressing
during POST, you can access Windows® 8 troubleshoot
options which includes the following:
•
•
•
Refresh your PC
Reset your PC
Advanced options
Refresh your PC
Use Refresh your PC if you want to refresh your system without losing
your current files and applications.
To access this during POST:
1.
ꢀ.
Restart your Notebook PC then press
POST.
Wait for Windows® to load the Choose an option
screen then tap Troubleshoot.
during
3.
ꢁ.
Tap Refresh your PC.
In the Refresh your PC screen, read the bullet points
to learn more about using this option then tap
Next.
ꢂ.
ꢃ.
ꢄ.
Tap the account you would like to refresh.
Type your account password then tap Continue.
Tap Refresh.
IMPORTANT! Ensure that your Notebook PC is plugged in
to a power source before refreshing your system.
Notebook PC E-Manual
81
Reset your PC
IMPORTANT! Back up all your data before performing this option.
Use Reset your PC to restore your Notebook PC to its default settings.
To access this during POST:
1.
ꢀ.
Restart your Notebook PC then press
POST.
during
Wait for Windows® to load the Choose an option
screen then tap Troubleshoot.
3.
ꢁ.
Tap Reset your PC.
In the Reset your PC screen, read the bullet points
to learn more about using this option then tap
Next.
ꢂ.
ꢃ.
Tap your preferred reset option: Just remove my
files or Fully clean the drive.
Tap Reset.
IMPORTANT! Ensure that your Notebook PC is plugged in
to a power source before resetting your system.
8ꢀ
Notebook PC E-Manual
Advanced options
Use Advanced options to perform additional troubleshooting options
in your Notebook PC.
To access this during POST:
1.
ꢀ.
Restart your Notebook PC then press
POST.
Wait for Windows® to load the Choose an option
screen then tap Troubleshoot.
during
3.
ꢁ.
Tap Advanced options.
In the Advanced options screen, select the
troubleshooting option you wish to perform.
ꢂ.
Follow the succeeding steps to complete the
process.
Using System Image Recovery
Under Advanced options, you can use System Image Recovery to
recover your system using your Notebook PC’s original image file.
To access this during POST:
1.
Restart your Notebook PC then press
POST.
during
ꢀ.
3.
Wait for Windows® to load the Choose an option
screen then tap Troubleshoot.
Tap Advanced options.
Notebook PC E-Manual
83
ꢁ.
ꢂ.
In the Advanced options screen, select System
Image Recovery.
Choose an account you would like to recover using
a system image file.
ꢃ.
ꢄ.
Type your account password then tap Continue.
Select Use the latest available system image
(recommended), then tap Next. You can also
choose Select a system image if your system
image is in an external device or DVD.
8.
Follow the succeeding steps to complete the
system image recovery procedure.
NOTE: We strongly recommend that you regularly backup
your system to prevent data loss in case your Notebook
PC stops working.
8ꢁ
Notebook PC E-Manual
DVD-ROM Drive Information
(on selected models)
The DVD-ROM drive allows you to view and create your own CDs and DVDs. You
can purchase an optional DVD viewer software to view DVD titles.
Regional Playback Information
Playback of DVD movie titles involves decoding MPEGꢀ video, digital AC3 audio
and decryption of CSS protected content. CSS (sometimes called copy guard) is
the name given to the content protection scheme adopted by the motion picture
industry to satisfy a need to protect against unlawful content duplication.
Although the design rules imposed on CSS licensors are many, one rule that is
most relevant is playback restrictions on regionalized content. In order to facilitate
geographically staggered movie releases, DVD video titles are released for specific
geographic regions as defined in “Region Definitions” below. Copyright laws require
that all DVD movies be limited to a particular region (usually coded to the region at
which it is sold). While DVD movie content may be released for multiple regions, CSS
design rules require that any system capable of playing CSS encrypted content must
only be capable of playing one region.
IMPORTANT! The region setting may be changed up to five times using the viewer
software, then it can only play DVD movies for the last region setting. Changing the
region code after that will require factory resetting which is not covered by warranty. If
resetting is desired, shipping and resetting costs will be at the expense of the user.
8ꢃ
Notebook PC E-Manual
Region Definitions
Region 1
Canada, US, US Territories
Region 2
Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland, Iran,
Iraq, Ireland, Italy, Japan, Netherlands, Norway, Poland, Portugal, Saudi Arabia,
Scotland, South Africa, Spain, Sweden, Switzerland, Syria, Turkey, UK, Greece,
Former Yugoslav Republics, Slovakia
Region 3
Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore, Taiwan, Thailand,
Vietnam
Region 4
Australia, Caribbean (Except US Territories), Central America, New Zealand, Pacific
Islands, South America
Region 5
CIS, India, Pakistan, Rest of Africa, Russia, North Korea
Region 6
China
Notebook PC E-Manual
8ꢄ
Blu-ray ROM Drive Information
(on selected models)
The Blu-ray ROM Drive allows you to view high definition (HD) videos and other
disc file formats such as DVDs and CDs.
Region Definitions
Region A
North, Central and South American countries, and their territories; Taiwan, Hong
Kong, Macao, Japan, Korea (South and North), South East Asian countries and their
territories.
Region B
European, African, and South West Asian countries and their territories; Australia
and New Zealand.
Region C
Central, South Asian, Eastern European countries and their territories; China and
Mongolia.
NOTE: Refer to Blu-ray Disc website at www.blu-raydisc.com/en/Technical/FAQs/Blu-
rayDiscforVideo.aspx for more details.
Internal Modem Compliancy
The Notebook PC with internal modem model complies with JATE (Japan), FCC
(US, Canada, Korea, Taiwan), and CTRꢀ1. The internal modem has been approved
in accordance with Council Decision ꢅ8/ꢁ8ꢀ/EC for pan-European single terminal
connection to the public switched telephone network (PSTN). However due
to differences between the individual PSTNs provided in different countries,
the approval does not, of itself, give an unconditional assurance of successful
operation on every PSTN network termination point. In the event of problems you
should contact your equipment supplier in the first instance.
88
Notebook PC E-Manual
Overview
On ꢁth August 1ꢅꢅ8 the European Council Decision regarding the CTR ꢀ1 has
been published in the Official Journal of the EC. The CTR ꢀ1 applies to all non
voice terminal equipment with DTMF-dialling which is intended to be connected
to the analogue PSTN (Public Switched Telephone Network).
CTR ꢀ1 (Common Technical Regulation) for the attachment requirements for
connection to the analogue public switched telephone networks of terminal
equipment (excluding terminal equipment supporting the voice telephony
justified case service) in which network addressing, if provided, is by means of
dual tone multifrequency signalling.
Network Compatibility Declaration
Statement to be made by the manufacturer to the Notified Body and the vendor:
“This declaration will indicate the networks with which the equipment is designed
to work and any notified networks with which the equipment may have inter-
working difficulties.”
Statement to be made by the manufacturer to the user: “This declaration will
indicate the networks with which the equipment is designed to work and any
notified networks with which the equipment may have inter-working difficulties.
The manufacturer shall also associate a statement to make it clear where network
compatibility is dependent on physical and software switch settings. It will also
advise the user to contact the vendor if it is desired to use the equipment on
another network.”
Up to now the Notified Body of CETECOM issued several pan-European approvals
using CTR ꢀ1. The results are Europe’s first modems which do not require
regulatory approvals in each individual European country.
Non-Voice Equipment
Answering machines and loud-speaking telephones can be eligible as well as
modems, fax machines, auto-dialers and alarm systems. Equipment in which the
end-to-end quality of speech is controlled by regulations (e.g. handset telephones
and in some countries also cordless telephones) is excluded.
Notebook PC E-Manual
8ꢅ
This table shows the countries currently under the
CTR21 standard.
Country
Austria1
Applied
More Testing
Yes
No
Belgium
Czech Republic
Denmark1
Finland
Yes
No
No
Not Applicable
Yes
Yes
Yes
No
France
Yes
No
Germany
Greece
Yes
No
Yes
No
Hungary
Iceland
No
Not Applicable
Yes
No
Ireland
Yes
No
Italy
Still Pending
No
Still Pending
Israel
No
Lichtenstein
Luxemburg
The Netherlands1
Norway
Yes
No
Yes
No
Yes
Yes
Yes
No
Poland
No
Not Applicable
Portugal
Spain
No
Not Applicable
No
Not Applicable
Sweden
Yes
No
No
No
Switzerland
United Kingdom
Yes
Yes
ꢅ0
Notebook PC E-Manual
This information was copied from CETECOM and is supplied without liability. For
updates to this table, you may visit http://www.cetecom.de/technologies/ctr_ꢀ1.
html
1 National requirements will apply only if the equipment may use pulse dialling
(manufacturers may state in the user guide that the equipment is only intended to
support DTMF signalling, which would make any additional testing superfluous).
In The Netherlands additional testing is required for series connection and caller
ID facilities.
Federal Communications Commission
Interference Statement
This device complies with FCC Rules Part 1ꢂ. Operation is subject to the following
two conditions:
•
•
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 1ꢂ of the Federal Communications Commission
(FCC) rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Notebook PC E-Manual
ꢅ1
•
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING! The use of a shielded-type power cord is required in order to meet
FCC emission limits and to prevent interference to the nearby radio and television
reception. It is essential that only the supplied power cord be used. Use only shielded
cables to connect I/O devices to this equipment. You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance could
void your authority to operate the equipment.
(Reprinted from the Code of Federal Regulations #ꢁꢄ, part 1ꢂ.1ꢅ3, 1ꢅꢅ3.
Washington DC: Office of the Federal Register, National Archives and Records
Administration, U.S. Government Printing Office.)
FCC Radio Frequency (RF) Exposure Caution
Statement
WARNING! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
“The manufacture declares that this device is limited to Channels 1 through 11 in the
ꢀ.ꢁGHz frequency by specified firmware controlled in the USA.”
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with FCC RF exposure
compliance requirements, please avoid direct contact to the transmitting antenna
during transmitting. End users must follow the specific operating instructions for
satisfying RF exposure compliance.
ꢅꢀ
Notebook PC E-Manual
Declaration of Conformity (R&TTE directive
1999/5/EC)
The following items were completed and are considered relevant and sufficient:
•
•
•
•
•
Essential requirements as in [Article 3]
Protection requirements for health and safety as in [Article 3.1a]
Testing for electric safety according to [EN ꢃ0ꢅꢂ0]
Protection requirements for electromagnetic compatibility in [Article 3.1b]
Testing for electromagnetic compatibility in [EN 301 ꢁ8ꢅ-1] & [EN 301
ꢁ8ꢅ-1ꢄ]
•
•
Effective use of the radio spectrum as in [Article 3.ꢀ]
Radio test suites according to [EN 300 3ꢀ8-ꢀ]
CE Marking
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements of the EEC
directives ꢀ00ꢁ/108/EC “Electromagnetic compatibility”and ꢀ00ꢃ/ꢅꢂ/EC “Low
voltage directive”.
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1ꢅꢅꢅ/ꢂ/EC of the
European Parliament and Commission from ꢅ March, 1ꢅꢅꢅ governing Radio and
Telecommunications Equipment and mutual recognition of conformity.
Notebook PC E-Manual
ꢅ3
IC Radiation Exposure Statement for Canada
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with IC RF exposure
compliance requirements, please avoid direct contact to the transmitting antenna
during transmitting. End users must follow the specific operating instructions for
satisfying RF exposure compliance.
Operation is subject to the following two conditions:
•
•
This device may not cause interference and
This device must accept any interference, including interference that may
cause undesired operation of the device.
To prevent radio interference to the licensed service (i.e. co-channel Mobile
Satellite systems) this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that
is installed outdoors is subject to licensing.
This device complies with Industry Canada licence-exempt RSS standard(s).
CAN ICES-3(B)/NMB-3(B)
ꢅꢁ
Notebook PC E-Manual
Déclaration d’Industrie Canada relative à l’
exposition aux ondes radio
Cet appareil est conforme aux limites d’exposition aux radiations d’Industrie
Canada définies pour un environnement non-contrôlé. Pour maintenir la
conformité avec les exigences d’exposition RF d’IC, veuillez éviter tout contact
direct avec l’antenne pendant l’émission. Les utilisateurs finaux doivent suivre
les instructions de fonctionnement spécifiques pour satisfaire la conformité aux
expositions RF.
Son utilisation est sujette aux deux conditions suivantes :
•
•
Cet appareil ne peut pas causer d’interférence, et
Cet appareil doit accepter toute interférence, y compris les interférences
qui pourraient causer un fonctionnement non souhaité de l’appareil.
Pour éviter les interférences radio avec le service sous licence (c’est à-dire le
partage de canal avec les systèmes de téléphonie satellite), cet appareil est destiné
à être utilisé en intérieur et loin des fenêtres pour fournir un blindage maximal.
Tout appareil (ou son antenne d’émission) qui est installé en extérieur est sujet à
cette licence.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence.
CAN ICES-3(B)/NMB-3(B)
Notebook PC E-Manual
ꢅꢂ
Wireless Operation Channel for Different
Domains
N. America
Japan
ꢀ.ꢁ1ꢀ-ꢀ.ꢁꢃꢀ GHz
ꢀ.ꢁ1ꢀ-ꢀ.ꢁ8ꢁ GHz
Ch01 through CH11
Ch01 through Ch1ꢁ
Europe ETSI
ꢀ.ꢁ1ꢀ-ꢀ.ꢁꢄꢀ GHz
Ch01 through Ch13
France Restricted Wireless Frequency Bands
Some areas of France have a restricted frequency band. The worst case maximum
authorized power indoors are:
•
•
10mW for the entire ꢀ.ꢁ GHz band (ꢀꢁ00 MHz–ꢀꢁ83.ꢂ MHz)
100mW for frequencies between ꢀꢁꢁꢃ.ꢂ MHz and ꢀꢁ83.ꢂ MHz
NOTE: Channels 10 through 13 inclusive operate in the band ꢀꢁꢁꢃ.ꢃ MHz to ꢀꢁ83.ꢂ
MHz.
There are few possibilities for outdoor use: on private property or on the private
property of public persons, use is subject to a preliminary authorization procedure
by the Ministry of Defense, with maximum authorized power of 100mW in the
ꢀꢁꢁꢃ.ꢂ–ꢀꢁ83.ꢂ MHz band. Use outdoors on public property is not permitted.
In the departments listed below, for the entire ꢀ.ꢁ GHz band:
•
•
Maximum authorized power indoors is 100mW
Maximum authorized power outdoors is 10mW
ꢅꢃ
Notebook PC E-Manual
Departments in which the use of the ꢀꢁ00–ꢀꢁ83.ꢂ MHz band is permitted with an
EIRP of less than 100mW indoors and less than 10mW outdoors:
01 Ain
0ꢀ Aisne
03 Allier
0ꢂ Hautes Alpes
08 Ardennes
0ꢅ Ariège
11 Aude
1ꢀ Aveyron
ꢀꢂ Doubs
1ꢃ Charente
ꢀꢃ Drôme
ꢀꢁ Dordogne
3ꢀ Gers
3ꢃ Indre
ꢁꢂ Loiret
ꢂ8 Nièvre
3ꢄ Indre et Loire
ꢂ0 Manche
ꢂꢅ Nord
ꢁ1 Loir et Cher
ꢂꢂ Meuse
ꢃ0 Oise
ꢃ1 Orne
ꢃ3 Puy du Dôme
ꢃꢁ Pyrénées Atlantique
ꢃ8 Haut Rhin
ꢃꢃ Pyrénées Orientales
ꢄ0 Haute Saône
ꢃꢄ Bas Rhin
ꢄ1 Saône et Loire
ꢄꢂ Paris
8ꢀ Tarn et Garonne
8ꢅ Yonne
8ꢁ Vaucluse
88 Vosges
ꢅ0 Territoire de Belfort
ꢅꢁ Val de Marne
This requirement is likely to change over time, allowing you to use your wireless
LAN card in more areas within France. Please check with ART for the latest
information (www.arcep.fr)
NOTE: Your WLAN Card transmits less than 100mW, but more than 10mW.
Notebook PC E-Manual
ꢅꢄ
UL Safety Notices
Required for UL 1ꢁꢂꢅ covering telecommunications (telephone) equipment
intended to be electrically connected to a telecommunication network that has an
operating voltage to ground that does not exceed ꢀ00V peak, 300V peak-to-peak,
and 10ꢂV rms, and installed or used in accordance with the National Electrical
Code (NFPA ꢄ0).
When using the Notebook PC modem, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons, including
the following:
•
DO NOT use the Notebook PC near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
•
•
DO NOT use the Notebook PC during an electrical storm. There may be a
remote risk of electric shock from lightning.
DO NOT use the Notebook PC in the vicinity of a gas leak.
Required for UL 1ꢃꢁꢀ covering primary (nonrechargeable) and secondary
(rechargeable) lithium batteries for use as power sources in products. These
batteries contain metallic lithium, or a lithium alloy, or a lithium ion, and may
consist of a single electrochemical cell or two or more cells connected in series,
parallel, or both, that convert chemical energy into electrical energy by an
irreversible or reversible chemical reaction.
•
Do not dispose the Notebook PC battery pack in a fire, as they may
explode. Check with local codes for possible special disposal instructions
to reduce the risk of injury to persons due to fire or explosion.
•
Do not use power adapters or batteries from other devices to reduce the
risk of injury to persons due to fire or explosion. Use only UL certified
power adapters or batteries supplied by the manufacturer or authorized
retailers.
ꢅ8
Notebook PC E-Manual
Power Safety Requirement
Products with electrical current ratings up to ꢃA and weighing more than 3Kg
must use approved power cords greater than or equal to: H0ꢂVV-F, 3G, 0.ꢄꢂmmꢀ or
H0ꢂVV-F, ꢀG, 0.ꢄꢂmmꢀ.
TV Notices
Note to CATV System Installer—Cable distribution system should be grounded
(earthed) in accordance with ANSI/NFPA ꢄ0, the National Electrical Code (NEC),
in particular Section 8ꢀ0.ꢅ3, Grounding of Outer Conductive Shield of a Coaxial
Cable – installation should include bonding the screen of the coaxial cable to the
earth at the building entrance.
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and
Restriction of Chemicals) regulatory framework, we publish the chemical
substances in our products at ASUS REACH website at http://csr.asus.com/english/
REACH.htm.
Macrovision Corporation Product Notice
This product incorporates copyright protection technology that is protected by
method claims of certain U.S.A. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume
levels for long periods.
Notebook PC E-Manual
ꢅꢅ
Nordic Lithium Cautions (for lithium-ion
batteries)
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions. (English)
ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato.
Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla
fabbrica. Non disperdere le batterie nell’ambiente. (Italian)
VORSICHT! Explosionsgefahr bei unsachgemäßen Austausch der Batterie. Ersatz
nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ.
Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (German)
ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning
må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri
tilbage til leverandøren. (Danish)
VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller
en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt
batteri enligt fabrikantens instruktion. (Swedish)
VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo
ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hävitä käytetty paristo
valmistagan ohjeiden mukaisesti. (Finnish)
ATTENTION! Il y a danger d’explosion s’il y a remplacement incorrect de la
batterie. Remplacer uniquement avec une batterie du mêre type ou d’un type
équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées
conformément aux instructions du fabricant. (French)
ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme
batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte
batterier kasseres i henhold til fabrikantens instruksjoner. (Norwegian)
(Japanese)
ВНИМАНИЕ! При замене аккумулятора на аккумулятор иного типа возможно
его возгорание. Утилизируйте аккумулятор в соответствии с инструкциями
производителя. (Russian)
100
Notebook PC E-Manual
Optical Drive Safety Information
Laser Safety Information
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT
WARNING! To prevent exposure to the optical drive’s laser, do not attempt to
disassemble or repair the optical drive by yourself. For your safety, contact a
professional technician for assistance.
Service warning label
WARNING! INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR
VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August ꢀ, 1ꢅꢄꢃ.
These regulations apply to laser products manufactured from August 1, 1ꢅꢄꢃ.
Compliance is mandatory for products marketed in the United States.
WARNING! Use of controls or adjustments or performance of procedures other
than those specified herein or in the laser product installation guide may result in
hazardous radiation exposure.
Coating Notice
IMPORTANT! To provide electrical insulation and maintain electrical safety, a
coating is applied to insulate the device except on the areas where the I/O ports
are located.
Notebook PC E-Manual
101
German
Greek
Italian
Portuguese
Spanish
Swedish
Notebook PC E-Manual
103
ENERGY STAR complied product
ENERGY STAR is a joint program of the U.S. Environmental
Protection Agency and the U.S. Department of Energy helping
us all save money and protect the environment through energy
efficient products and practices.
All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR
standard, and the power management feature is enabled by default. The
monitor and computer are automatically set to sleep after 1ꢂ and 30 minutes
of user inactivity. To wake your computer, click the mouse or press any key on
the keyboard. Please visit http://www.energy.gov/powermanagement for detail
information on power management and its benefits to the environment. In
addition, please visit http://www.energystar.gov for detail information on the
ENERGY STAR joint program.
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating systems.
European Union Eco-label
This Notebook PC has been awarded the EU Flower label, which means that this
product has the following characteristics:
1.
ꢀ.
3.
ꢁ.
ꢂ.
Decreased energy consumption during use and stand-by modes.
Limited use of toxic heavy metals.
Limited use of substances harmful to the environment and health.
Reduction of the use of natural resources by encouraging recycling.
Designed for easy upgrades and longer lifetime through providing
compatible spare parts such as batteries, power supplies, the keyboard, the
memory, and if available the CD drive or DVD drive.
ꢃ.
Reduced solid waste through takeback policy.
For more information on the EU Flower label, please visit the European Union Eco-
label website at http://www.ecolabel.eu.
10ꢁ
Notebook PC E-Manual
Global Environmental Regulation Compliance
and Declaration
ASUS follows the green design concept to design and manufacture our products,
and makes sure that each stage of the product life cycle of ASUS product is in line
with global environmental regulations. In addition, ASUS disclose the relevant
information based on regulation requirements.
Please refer to http://csr.asus.com/english/Compliance.htm for information
disclosure based on regulation requirements ASUS is complied with:
Japan JIS-C-0950 Material Declarations
EU REACH SVHC
Korea RoHS
Swiss Energy Laws
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle our products, batteries, other
components as well as the packaging materials. Please go to http://csr.asus.com/
english/Takeback.htm for detailed recycling information in different regions.
Regional notice for Singapore
This ASUS product complies with IDA Standards.
Complies with
IDA Standards
DB103778
Notebook PC E-Manual
10ꢂ
EC Declaration of Conformity
We, the undersigned,
Manufacturer:
ASUSTeK COMPUTER INC.
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
TAIWAN
Address, City:
Country:
Authorized representative in Europe:
Address, City:
ASUS COMPUTER GmbH
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
Country:
declare the following apparatus:
Product name :
Notebook PC
Model name :
X451C, A451C, F451C, P451C, D450C, R411C, X451M,
A451M, F451M, P451M, D450M, R411M
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
EN 55022:2010
EN 55024:2010
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
EN 61000-3-3:2008
EN 55020:2007+A11:2011
1999/5/EC-R &TTE Directive
EN 300 328 V1.7.1(2006-10)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 893 V1.6.1(2011-11)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.1.1(2009-05)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 62479:2010
EN 50385:2002
EN 62311:2008
2006/95/EC-LVD Directive
EN 60950-1 / A12:2011
EN 60065:2002 / A12:2011
2009/125/EC-ErP Directive
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
2011/65/EU-RoHS Directive
CE marking
Ver. 130208
(EC conformity marking)
Position : CEO
Name :
Jerry Shen
Declaration Date: 17/09/2013
Year to begin affixing CE marking:2013
Signature : __________
10ꢃ
Notebook PC E-Manual
EC Declaration of Conformity
We, the undersigned,
Manufacturer:
ASUSTeK COMPUTER INC.
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
TAIWAN
Address, City:
Country:
Authorized representative in Europe:
Address, City:
ASUS COMPUTER GmbH
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
Country:
declare the following apparatus:
Product name :
Notebook PC
Model name :
X551C, A551C, F551C, P551C, D550C, R512C, X551M,
A551M, F551M, P551M, D550M, R512M
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
EN 55022:2010+AC:2011
EN 55024:2010
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
EN 61000-3-3:2008
EN 55020:2007+A11:2011
1999/5/EC-R &TTE Directive
EN 300 328 V1.7.1(2006-10)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 893 V1.6.1(2011-11)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 62479:2010
EN 50385:2002
EN 62311:2008
2006/95/EC-LVD Directive
EN 60950-1 / A12:2011
EN 60065:2002 / A12:2011
2009/125/EC-ErP Directive
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EC) No. 617/2013
2011/65/EU-RoHS Directive
CE marking
Ver. 130816
(EC conformity marking)
Position : CEO
Name :
Jerry Shen
Declaration Date: 17/09/2013
Year to begin affixing CE marking:2013
Signature : __________
Notebook PC E-Manual
10ꢄ
EC Declaration of Conformity
We, the undersigned,
Manufacturer:
ASUSTeK COMPUTER INC.
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
TAIWAN
Address, City:
Country:
Authorized representative in Europe:
Address, City:
ASUS COMPUTER GmbH
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
Country:
declare the following apparatus:
Product name :
Notebook PC
Model name :
X451C, A451C, F451C, P451C, D450C, R411C, X451M,
A451M, F451M, P451M, D450M, R411M
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
EN 55022:2010
EN 55024:2010
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
EN 61000-3-3:2008
EN 55020:2007+A11:2011
1999/5/EC-R &TTE Directive
EN 300 328 V1.7.1(2006-10)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 893 V1.6.1(2011-11)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.1.1(2009-05)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 62479:2010
EN 50385:2002
EN 62311:2008
2006/95/EC-LVD Directive
EN 60950-1 / A12:2011
EN 60065:2002 / A12:2011
2009/125/EC-ErP Directive
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
2011/65/EU-RoHS Directive
CE marking
Ver. 130208
(EC conformity marking)
Position : CEO
Name :
Jerry Shen
Declaration Date: 17/09/2013
Signature : __________
Year to begin affixing CE marking:2013
108
Notebook PC E-Manual
EC Declaration of Conformity
We, the undersigned,
Manufacturer:
ASUSTeK COMPUTER INC.
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
TAIWAN
Address, City:
Country:
Authorized representative in Europe:
Address, City:
ASUS COMPUTER GmbH
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
Country:
declare the following apparatus:
Product name :
Notebook PC
Model name :
X551C, A551C, F551C, P551C, D550C, R512C, X551M,
A551M, F551M, P551M, D550M, R512M
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
EN 55022:2010+AC:2011
EN 55024:2010
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
EN 61000-3-3:2008
EN 55020:2007+A11:2011
1999/5/EC-R &TTE Directive
EN 300 328 V1.7.1(2006-10)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 893 V1.6.1(2011-11)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 62479:2010
EN 50385:2002
EN 62311:2008
2006/95/EC-LVD Directive
EN 60950-1 / A12:2011
EN 60065:2002 / A12:2011
2009/125/EC-ErP Directive
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EC) No. 617/2013
2011/65/EU-RoHS Directive
CE marking
Ver. 130816
(EC conformity marking)
Position : CEO
Name :
Jerry Shen
Declaration Date: 17/09/2013
Signature : __________
Year to begin affixing CE marking:2013
Notebook PC E-Manual
10ꢅ
110
Notebook PC E-Manual
|
