ASUS VT229H User Manual

VT229 Series  
LCD Monitor  
User Guide  
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
Declaration of Conformity  
This device complies with the requirements set out in the Council  
Directive on the Approximation of the Laws of the Member States relating  
to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive  
(2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/  
EU).  
iii  
This product has been tested and found to comply with the harmonized  
standards for Information Technology Equipment, these harmonized  
standards published under Directives of Official Journal of the European  
Union.  
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extention cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked  
between 100-240V AC.  
If you encounter technical problems with the monitor, contact a  
qualified service technician or your retailer.  
iv  
The wall socket shall be installed near the equipment and shall be  
easily accessible.  
Remark: Suitable for entertainment purposes at specially controlled  
luminous indoor environments, to avoid disturbing reflections from the  
screen.  
v
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the  
cables and power cord. Follow the correct lifting techniques when  
positioning the monitor. When lifting or carrying the monitor, grasp the  
edges of the monitor. Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the  
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains  
may be removed with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner  
intended for use with the LCD. Never spray cleaner directly on the  
screen, as it may drip inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the  
fluorescent light. Turn off the Power Switch and turn it on again to  
make sure that the flicker disappears.  
You may find slightly uneven brightness on the screen depending on  
the desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the  
previous screen may remain after switching the image. The screen will  
recover slowly or you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore,  
contact your dealer or service center to fix it. Do not repair the screen  
by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying  
to complete a task.  
CAUTION: Information to prevent damage to the components  
when trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a  
task.  
NOTE: Tips and additional information to aid in completing a task.  
As an Energy Star® Partner, our company has determined  
that this product meets the Energy Star® guidelines for  
energy efficiency.  
vi  
Where to find more information  
Refer to the following sources for additional information and for product  
and software updates.  
1. ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2. Optional documentation  
Your product package may include optional documentation that may  
have been added by your dealer. These documents are not part of  
the standard package.  
vii  
1.1  
Welcome!  
Thank you for purchasing the ASUS® VT229 Series LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a crisper,  
broader, and brighter display, plus a host of features that enhance your  
viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the VT229 Series brings you!  
1.2  
Package contents  
Check your VT229 Series LCD package for the following items:  
LCD monitor  
Monitor base  
Quick start guide  
1 x Power cord  
1 x VGA cable  
1 x Audio cable (optional)  
1 x HDMI cable (optional)  
1
x
USB type-B cable (only for touch function)  
1 x Warranty card  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS LCD Monitor VT229  
1-1  
1.3  
Assembling the monitor base  
To assemble the monitor base:  
1. Place the display flat on a cloth on the table. Then attach the base  
to the arm and fix with the screw to join them tightly. You can easily  
tighten the screw by fingers.  
2. Adjust the monitor to the angle that is most comfortable for you.  
We recommend that you cover the table surface with soft cloth to  
prevent damage to the monitor.  
2
1
1.4  
Connecting cables  
To connect cables:  
Connect the cables you need based on chapter 1.5.2, page1-4.  
Chapter 1: Product Introduction  
1-2  
1.5  
Monitor introduction  
1.5.1  
Front of the LCD monitor  
1
2
3
4
5
6
7
1.  
Shortcut key2  
This is a Shortcut key. The default setting is Blue Light Filter.  
Shortcut key1  
This is a Shortcut key. The default setting is Brightness.  
:
2.  
:
3. Input Select:  
Input Select: Use this hotkey to switch from input signal.  
4.  
5.  
6.  
Close Button:  
Exit the OSD menu.  
MENU Button:  
Press this button to enter the OSD menu.  
Power Button:  
Press this button to turn the monitor on/off.  
7. Power Indicator:  
The color definition of the power indicator is as the table below.  
Status  
White  
Amber  
OFF  
Description  
ON  
Standby mode  
OFF  
ASUS LCD Monitor VT229  
1-3  
1.5.2  
Rear of the LCD monitor  
8
7
1
HDMI  
VGA  
1
2
3
4
5
6
1. AC-IN port  
2. HDMI port  
3. VGA port  
4. Earphone Out port  
5. USB type-B port (only for touch function)  
6. Control buttons  
7. Kensington Lock  
8. Screw holes for VESA Wall Mount  
Chapter 1: Product Introduction  
1-4  
2.1  
Detaching the base/stand  
(for VESA wall mount)  
The detachable stand of the LCD monitor is specially designed for VESA  
wall mount.  
To detach the arm/stand:  
1. Disconnect power and signal cables. Carefully put the front of the  
monitor face down on a clean table.  
2. Use your finger to loosen the screw located at the bottom of the base,  
and remove the base from the stand. And then remove the hinge  
cover from monitor body by using your fingers.  
3. Use a screwdriver to remove the four screws on the arm, and then  
detach the arm/stand from the monitor.  
We recommend that you cover the table surface with soft cloth to  
prevent damage to the monitor.  
Hold the stand of the monitor while removing the screws.  
2
1
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.  
Use only the UL Listed Wall Mount Bracket with minimum weight/  
load 4.8kg according to the model listed in the specification table  
(Screw size: M4 x 10 mm).  
ASUS LCD Monitor VT229  
2-1  
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable  
for you.  
Hold the stand to prevent the monitor from falling while changing its  
angle.  
You can adjust the monitor’s angle from -5˚ to 20˚.  
Do not touch the Touch screen when you change the angle. It may  
cause damage or break the Touch screen and LCD screen.  
-5 ~ 20  
Chapter 2: Setup  
2-2  
3.1  
Touch Operation  
ASUS VT229 is a touch monitor which uses 10 point touch panel  
technology. Please use with latest OS like Windows 10.  
You can use either single finger touch, or multi-finger touch up to  
maximum simultaneous 10 touch points.  
10-Point Touch  
To activate touch functionality, you need to connect the display with the  
provided USB type-B cable to your computer.  
You do not need to install any other software.  
ASUS VT229 offers you groovy touch gestures like tap, grab, pinch,  
rotate, zoom, swipe, etc. The gestures allow you to launch programs  
and access the setting of your ASUS VT229 Display. The functions can  
be activated by using the hand gestures to ASUS VT229.  
Left edge swipe (on Windows 7/8/8.1/10 only)  
Swipe from the left edge of the screen to shuffle your running apps.  
Right edge swipe (on Windows 7/8/8.1/10 only)  
Swipe from the right edge of the screen to launch the Charm bar.  
ASUS LCD Monitor VT229  
3-1  
Finger slide (on Windows 7/8/8.1/10 only)  
Slide your finger to scroll up and down and slide your finger to pan the  
screen left or right.  
Zoom out  
Bring together your two fingers on the touch panel.  
Zoom in  
Spread apart your two fingers on the touch panel.  
Chapter 3: Touch operation  
3-2  
Single Tap/Double tap  
Single Tap  
Touch the target on the screen with one fingertip for one quick tap, then  
release.  
Double Tap  
Touch the target on the screen with one fingertip for two quick taps, then  
release.  
Tap an app to launch it (on Windows 7/8/8.1/10 only).  
Double-tap an item to launch it.  
ASUS LCD Monitor VT229  
3-3  
Tap and hold  
To move an app, tap and hold the app tile and drag it to a new location.  
To close an app (on Windows 7/8/8.1/10 only), tap and hold the top side of  
the running app and drag it down to the bottom of the screen to close it.  
NOTE:• You can access to OS website to get more description  
on touch operation.  
• Do not touch the screen with sharp objects, it may result in  
damage, and void warranty.  
• Do not push hard, or rest anything on the glass surface (if  
in horizontal position) as it will damage the screen and void  
warranty.  
• Please keep your hands clean and dry before touching the  
screen to ensure fluid touch operation.  
• The touch function works only on OS and applications which  
support touch functions.  
Chapter 3: Touch operation  
3-4  
4.1  
OSD (On-Screen Display) menu  
4.1.1  
How to reconfigure  
ASUS VT229  
Standard Mode VGA 1920x1080@60Hz  
S
Splendid  
Standard Mode  
sRGB Mode  
Scenery Mode  
Theater Mode  
Game Mode  
Night View Mode  
Reading Mode  
Darkroom Mode  
1. Press the [MENU] button to activate the OSD menu.  
2. Press and buttons to toggle between options in the Menu. As  
you move from one icon to another, the option name is highlighted.  
3. To select the highlighted item on the menu press the  
button.  
4. Press and buttons to select the desired parameter.  
5. Press the  
button to enter the slide bar and then use the or  
buttons, according to the indicators on the menu, to make your  
changes.  
6. Press the  
menu.  
button to return to previous menu or to close OSD  
4.1.2  
1. Splendid  
This function contains eight sub-functions that you can select for  
OSD Function Introduction  
your preference. Each mode has the Reset selection, allowing you to  
maintain your setting or return to the preset mode.  
Chapter 4: General Instruction  
4-1  
ASUS VT229  
Standard Mode VGA 1920x1080@60Hz  
S
Splendid  
Standard Mode  
sRGB Mode  
Scenery Mode  
Theater Mode  
Game Mode  
Night View Mode  
Reading Mode  
Darkroom Mode  
Standard Mode: This is the best choice for document editing  
with SPLENDID™ Video Enhancement.  
sRGB: This is the best choice for viewing photos and graphics  
from PCs.  
Scenery Mode: This is the best choice for scenery photo  
displaying with SPLENDID™ Video Enhancement.  
Theater Mode: This is the best choice for movie watching with  
SPLENDID™ Video Enhancement.  
Game Mode: This is the best choice for game playing with  
SPLENDID™ Video Enhancement.  
Night View Mode: This is the best choice for playing dark-  
scene game or watching movie with SPLENDID™ Video  
Enhancement.  
Reading Mode : This is the best choice for book reading.  
Darkroom Mode : This is the best choice for a weak ambient  
light environmen.  
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and  
ASCR functions are not user-configurable.  
In the sRGB, the Brightness, Contrast, Saturation, Color  
Temp., Skin Tone, Sharpness, and ASCR functions are not user-  
configurable.  
ASUS LCD Monitor VT229  
4-2  
2. Blue Light Filter  
Adjust the energy level of blue light emitted from LED backlight.  
ASUS VT229  
Standard Mode VGA 1920x1080@60Hz  
S
Blue Light Filter  
Level 0  
Level 1  
Level 2  
Level 3  
Level 4  
Level 0: No change.  
Level 1~4: The higher the level,the more blue light will be  
reduced.  
When Blue Light Filter is activated,the default settings of Standard  
Mode will be automatically imported.  
Between Level 1 to Level 3, the Brightness function is user-  
configurable.  
Level 4 is optimized setting. It is compliance with TUV Low Blue  
Light Certification. The Brightness function is not user-configurable.  
Please refer to the following to alleviate eye strains:  
Users should take some time away from the display if working for  
long hours. It is advised to take short breaks (at least 5 mins) after  
around 1 hour of continuous working at the computer. Taking short  
and frequent breaks is more effective than a single longer break.  
To minimize eye strain and dryness in your eyes, users should rest  
the eye periodically by focusing on objects that are far away.  
Eye exercises can help to reduces eye strain. Repeat these  
exercises often. If eye strain continues please consult a physician.  
Eye exercises: (1) Repeating look up and down (2) Slowly roll your  
eyes (3) Move your eyes diagonal.  
High energy blue light may lead to eye strain and AMD (Age-Related  
Macular Degeneration). Blue light Filter to reduce 70% (max.)  
harmful blue light to avoiding CVS (Computer Vision Syndrome).  
ASUS LCD Monitor VT229  
4-3  
3. Color  
Select the image color you like from this function.  
ASUS VT229  
Standard Mode VGA 1920x1080@60Hz  
S
Color  
Brightness  
Contrast  
Saturation  
Color Temp.  
Skin Tone  
Brightness: The adjusting range is from 0 to 100.  
Contrast: The adjusting range is from 0 to 100.  
Saturation: The adjusting range is from 0 to 100.  
Color Temp.: Contain three preset color modes (Cool, Normal,  
Warm) and one User Mode.  
Skin Tone: Contain three color modes including Reddish,  
Natural, and Yellowish.  
In the User Mode, colors of R (Red), G (Green), and B (Blue) are  
userconfigurable; the adjusting range is from 0 ~ 100.  
4. Image  
You can adjust the image Sharpness, Trace Free, Aspect Control,  
VividPixel, ASCR, Position, Focus and Auto Adjust from this main  
function.  
ASUS VT229  
Standard Mode VGA 1920x1080@60Hz  
S
Image  
Sharpness  
Trace Free  
Aspect Control  
VividPixel  
ASCR  
Position  
Focus  
Auto Adjust  
Chapter 4: General Instruction  
4-4  
Sharpness: Adjust the picture sharpness. The adjusting range  
is from 0 to 100. (Only disable for selecting “Standard Mode” and  
“sRGB Mode” in Splendid menu.)  
Trace Free: Speeds up the response time by Over Drive  
technology. The adjusting range is from lower 0 to faster 100.  
Aspect Control: Adjust the aspect ratio to “Full”, “4:3”,  
“OverScan”.  
VividPixel: ASUS Exclusive Technology that brings lifelike  
visuals for crystal-clear and detail-oriented enjoyment. The  
adjusting range is from 0 to 100.  
ASCR: Select ON or OFF to enable or disable dynamic contrast  
ratio function. (ASCR: ASUS Smart Contrast Ratio. Disabled at  
“Standard Mode”, “sRGB Mode” and “Reading Mode.)  
Position: Adjust the horizontal postition (H-Position) and the  
vertical position (V-Position) of the image. The adjusting range is  
from 0 to 100. (Only available for VGA input.)  
Focus: Reduce Horizonal-line noise and Vertical-line noise of  
the image by adjusting (Phase) and (Clock) separately. The  
adjusting range is from 0 to 100. (Only available for VGA input.)  
Auto Adjust: Automatically adjust the image to its optimized  
position, clock, and phase. (Only available for VGA input.)  
4:3 is only available when input source is in 4:3 format.  
5. Input Select  
Select the input source from VGA, HDMI.  
ASUS VT229  
Standard Mode VGA 1920x1080@60Hz  
S
Input Select  
VGA  
HDMI  
6. System Setup  
Adjust the system configuration.  
ASUS LCD Monitor VT229  
4-5  
ASUS VT229  
Standard Mode VGA 1920x1080@60Hz  
S
System Setup  
Splendid Demo Mode  
Volume  
QuickFit  
ECO Mode  
OSD Setup  
Language  
Key Lock  
More  
ASUS VT229  
Standard Mode VGA 1920x1080@60Hz  
S
System Setup  
Back  
Information  
Power Indicator  
Power Key Lock  
All Reset  
Splendid Demo Mode: Activate the demo mode for the  
Splendid function.  
Volume: Adjust the output volume level.  
QuickFit: Contains two patterns: (1) Grid (2) Photo size.  
1. Grid patterns:The grid patterns facilitate designers and  
users to organize content and layout on a page and  
achieve a consistent look and feel.  
Alignment Grid1  
Alignment Grid2  
Chapter 4: General Instruction  
4-6  
2. Photo size:The various real photo sizes displayed in the  
QuickFit function provides photographers and other users  
to accurately view and edit their photos in real size on the  
screen.  
2x2  
4x6  
3x5  
ECO Mode: Activate the ecology mode for power saving.  
OSD Setup: Adjusts the OSD Timeout, DDC/CI, and  
Transparency of the OSD screen.  
Language: Select OSD language. The selections are: English,  
French, German, Spanish, Italian, Dutch, Russian, Poland,  
Czech, Croatia, Hungary, Romania, Portugal, Turkey,  
Simplified Chinese, Traditional Chinese, Japanese, Korean,  
Persian, Thai and Indonesian.  
Key Lock: Disable all key functions. Pressing the second button  
on the right for more than five seconds to disable key lock  
function.  
More: Return the next page of System Setup.  
Back: Return the previous page of System Setup.  
Information:Displays the monitor information.  
Power Indicator: Turn the power LED indicator on/off.  
Power Key Lock: To disable / enable power key.  
All Reset: Selects “Yes” to revert all settings to the factory  
default mode.  
ASUS LCD Monitor VT229  
4-7  
7. Shortcut  
Selecting this option allows you to set one shortcut key.  
ASUS VT229  
Standard Mode VGA 1920x1080@60Hz  
S
Shortcut  
Shortcut 1  
Shortcut 2  
Blue Light Filter  
Splendid  
Brightness  
Auto Adjust  
Contrast  
Color Temp.  
Volume  
Shortcut 1: User can select from “Blue Light Filter” “Splendid”,  
“Brightness”, “Auto Adjust”, “Contrast”, “Color Temp.”, “Volume”,  
and set as shortcut key. The default setting is Brightness.  
Shortcut 2: User can select from “Blue Light Filter” “Splendid”,  
“Brightness”, “Auto Adjust”, “Contrast”, “Color Temp.”, “Volume”,  
and set as shortcut key. The default setting is Blue Light Filter.  
Chapter 4: General Instruction  
4-8  
4.2  
Specifications  
Model  
VT229H  
21.5”W(54.61 cm)  
1920 x 1080  
Panel Size  
Max. Resolution  
Brightness (Typ.)  
250cd/m2  
Intrisinc Contrast Ratio  
(Typ.)  
1000:1  
Viewing Angle (CR=10)  
(Typ.)  
178°(H) / 178°(V)  
Display Colors  
Response Time(Typ.)  
DVI input  
16.7 M (6bit+FRC)  
5ms  
No  
HDMI input  
Yes  
Yes  
D-Sub input  
USB type-B port(only for  
touch function)  
Yes  
Power ON Consumption  
Note  
18.56 W  
base on EPA7.0  
< 0.5 W  
Power Saving Mode  
Power OFF Mode  
Tilt  
< 0.5 W  
-5° ~ +20°  
VESA Wall Mounting  
Phys. Dimension (WxHxD)  
Box Dimension (WxHxD)  
Net Weight (Esti.)  
Gross Weight (Esti.)  
Voltage Rating  
Yes (100mm x 100mm)  
491.5 x 367.7 x 204.4mm  
558 x 425 x 137mm  
3.7Kg  
6.0Kg  
AC 100~240V(Built-in)  
*Specifications subject to change without notice.  
ASUS LCD Monitor VT229  
4-9  
4.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the power cord is properly connected to the  
monitor and the power outlet.  
The power LED lights Amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image is not centered or  
sized properly  
Press the auto button to automatically adjust the  
image.  
Adjust the H-Position or V-Position settings via  
OSD.  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move electrical devices that may cause electrical  
interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
Screen image is blurry or fuzzy  
No sound or sound is low  
Press the auto button to automatically adjust the  
image (for VGA mode only).  
Adjust the Phase and Clock settings via OSD.  
Make sure the earphone cable is properly  
connected to the monitor.  
Adjust the volume settings of both your monitor and  
computer.  
Make sure the computer sound card driver is  
properly installed and activated.  
Make sure the audio source is correct on the OSD.  
Chapter 4: General Instruction  
4-10  
4.4  
Supported Timing List  
PC Supported Primary Timing  
Resolution  
640x480  
640x480  
640x480  
800x600  
800x600  
800x600  
800x600  
1024x768  
1024x768  
1024x768  
1152x864  
1280x960  
1280x1024  
Refresh Rate  
Horizontal Frequency  
31.469kHz  
37.861kHz  
37.5kHz  
60Hz  
72Hz  
75Hz  
56Hz  
60Hz  
72Hz  
75Hz  
60Hz  
70Hz  
75Hz  
75Hz  
60Hz  
60Hz  
35.156kHz  
37.879kHz  
48.077kHz  
46.875kHz  
48.363kHz  
56.476kHz  
60.023kHz  
67.5kHz  
60kHz  
63.981kHz  
1280x1024  
1440x900  
1440x900  
1680x1050  
1920x1080  
75Hz  
60Hz  
75Hz  
60Hz  
60Hz  
79.976kHz  
55.935kHz  
70.635kHz  
65.29kHz  
67.5kHz  
IBM Modes, Factory Preset Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
640x350  
720x400  
70Hz  
70Hz  
31.469kHz  
31.469kHz  
MAC Modes, Factory Preset Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
640x480  
832x624  
67Hz  
75Hz  
35kHz  
49.725kHz  
VESA Modes, User Available Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
848x480  
1280x720(RB)  
1280x720  
60Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
31.02kHz  
44.444kHz  
44.772kHz  
56.456kHz  
47.396kHz  
49.306kHz  
49.702kHz  
62.795kHz  
47.712kHz  
55.469kHz  
70.635kHz  
64.674kHz  
66.587kHz  
1280x720  
1280x768(RB)  
1280x800(RB)  
1280x800  
1280x800  
1366x768  
1440x900(RB)  
1440x900  
1680x1050(RB)  
1920x1080  
ASUS LCD Monitor VT229  
4-11  
SD/HD Timings (HDMI input only)  
HDMI 1.3,CEA-861B Formats, SD/HD Supported Primary Timings of (HDMI input  
only)  
Resolution  
Refresh Rate  
Horizontal Frequency  
640x480P  
720x480P  
720x576P  
1280x720P  
1280x720P  
1920x1080i  
1920x1080i  
59.94 / 60Hz  
59.94 / 60Hz  
50Hz  
50Hz  
59.94 / 60Hz  
50Hz  
31.469 / 31.5kHz  
31.469 / 31.5kHz  
31.25kHz  
37.5kHz  
44.955 /45kHz  
28.125kHz  
59.94 / 60Hz  
33.716 / 33.75kHz  
HDMI 1.3,CEA-861B Formats, SD/HD Supported Optional Timings of (HDMI input  
only)  
Resolution  
Refresh Rate  
Horizontal Frequency  
1440x480P  
1440x576P  
1920x1080P  
1920x1080P  
59.94 / 60Hz  
50Hz  
50Hz  
59.94 / 60Hz  
31.469 / 31.5kHz  
31.25kHz  
56.25kHz  
67.433 / 67.5kHz  
* The modes not listed in the above tables may not be supported. For optimal resolution, we  
recommend that you choose a mode listed in the above tables.  
Chapter 4: General Instruction  
4-12  

Shaklee Airsource Purification System User Manual
Panasonic Cw C53hu User Manual
Nec Univerge Sv8100 User Manual
HP ELITEBOOK 8460W User Manual
HP 11890A User Manual
GE A1150 User Manual
DELL CHROMEBOOK 5190 User Manual
BLACK DECKER GCO2400 User Manual
ACER CHROMEBOOK 11 CB3 131 User Manual
ACER ASPIRE 3 A315 23 User Manual