ASUS VG246H User Manual

VG246 Series  
LCD Monitor  
User Guide  
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
iii  
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extension cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked  
between 100 ~ 240V AC.  
The socket-outlet shall be installed near the equipment and shall be  
easily accessible  
If you encounter technical problems with the monitor, contact a  
qualified servic er.  
Provide an earthing connection before the mains plug is connected to  
the mains. And, when disconnecting the earthing connection, be sure  
to disconnect after pulling out the mains plug from the mains.  
iv  
WARNING  
Usage of other than specified head- or earphones can result in hearing  
loss due to excessive sound pressures.  
Please confirm the distribution system in building installation shall  
provide the circuit breaker rated 120/240V, 20A (maximum).  
If provided with a 3-pin attachment plug on the power cord, plug the  
cord into a grounded (earthed) 3-pin outlet. Do not disable the power  
cord grounding pin, for example, by attaching a 2-pin adapter. The  
grounding pin is an important safety feature.  
v
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the  
cables and power cord. Follow the correct lifting techniques when  
positioning the monitor. When lifting or carrying the monitor, grasp the  
edges of the monitor. Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the  
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains  
may be removed with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner  
intended for use with the LCD. Never spray cleaner directly on the  
screen, as it may drip inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the  
fluorescent light. Turn off the Power Switch and turn it on again to  
make sure that the flicker disappears.  
You may find slightly uneven brightness on the screen depending on  
the desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the  
previous screen may remain after switching the image. The screen will  
recover slowly or you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore,  
contact your dealer or service center to fix it. Do not repair the screen  
by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying to  
complete a task.  
CAUTION: Information to prevent damage to the components  
when trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a  
task.  
NOTE: Tips and additional information to aid in completing a task.  
vi  
Where to find more information  
Refer to the following sources for additional information and for product  
and software updates.  
1. ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2. Optional documentation  
Your product package may include optional documentation that may  
have been added by your dealer. These documents are not part of  
the standard package.  
vii  
1.1  
Welcome!  
Thank you for purchasing the ASUS® LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a crisper,  
broader, and brighter display, plus a host of features that enhance your  
viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the monitor brings you!  
1.2  
Package contents  
Check your package for the following items:  
LCD Monitor  
Monitor Base  
Quick Start Guide  
Warranty Card  
1x Power Cord  
*
1x HDMI Cable (optional)  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS LCD Monitor VG246 Series  
1-1  
1.3  
Assembling the monitor  
To assemble the monitor:  
1. Place the display flat on a cloth on the table, Then attach the base  
to the arm and fix with the screw to join them tightly. You can easily  
tighten the screw by fingers.  
2. Adjust the monitor to the angle that is most comfortable for you.  
-5 ~ 23  
2
1
3
1.4  
Outline dimension  
Unit: mm [inch]  
1-2  
Chapter 1: Product Introduction  
1.5  
Connect cables  
1.5.1  
Rear of the LCD monitor  
5
VG246H  
HDMI  
VGA  
4
1
2
3
1. AC-IN Port  
2. HDMI Port  
3. VGA Port  
4. Earphone - out Port  
5. Kensington Lock  
ASUS LCD Monitor VG246 Series  
1-3  
1.6  
Monitor introduction  
1.6.1  
Using the Controls button  
Use the control button on the back of the monitor to adjust the image  
settings.  
8 7 6 5 4  
3 2  
1
1. Power Indicator:  
The color definition of the power indicator is as the below table.  
Status  
White  
Amber  
OFF  
Description  
ON  
Standby mode  
OFF  
2.  
3.  
4.  
Power Button:  
Press this button to turn the monitor on/off.  
MENU Button:  
Press this button to enter the OSD menu.  
Close Button:  
Exit the OSD menu.  
5.  
6.  
Input Select Button:  
Use this hotkey to switch from VGA, HDMI input signal.  
GamePlus Button:  
GamePlus: The GamePlus Function provides a toolkit and creates a  
better gaming environment for users when playing different types of  
games. Particularly, Crosshair function is specially designed for new  
gamers or beginners interested in First Person Shooter (FPS) games.  
1-4  
Chapter 1: Product Introduction  
To active GamePlus:  
Press GamePlus Button to enter the GamePlus main menu.  
Activate Crosshair, Timer or FPS Counter or Display Alignment  
function.  
Press the and buttons to select and press  
to confirm the  
function needed. Press  
to go off, and exit.  
GamePlus main menu  
GamePlus-Crosshair  
GamePlus  
FPS  
Display Alignment  
FPS Counter  
Crosshair  
Timer  
(Practice Mode)  
GamePlus-Timer  
GamePlus-FPS Counter  
FPS  
Position  
7.  
8.  
Shortcut key1 Button:  
This is a Shortcut key. The default setting is GameVisual.  
Shortcut key2 Button:  
This is a Shortcut key. The default setting is Blue Light Filter.  
ASUS LCD Monitor VG246 Series  
1-5  
2.1  
Detaching the arm/stand (for VESA wall  
mount)  
The detachable stand of this monitor is specially designed for VESA wall  
mount.  
To detach the arm/stand  
1. Disconnect power and signal cables. Carefully put the front of the  
monitor face down on a clean table.  
2. Use a screwdriver to remove the four screws on the arm (Figure 1),  
and then detach the arm/stand from the monitor (Figure 2).  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
Hold the stand of the monitor while removing the screws.  
Figure 1  
Figure 2  
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.  
Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg  
(Screw size: M4 x 10 mm).  
1-6  
Chapter 1: Product Introduction  
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable  
for you.  
Hold the stand to prevent the monitor from falling when you change its  
angle.  
You can adjust the monitor’s angle from +23˚ to -5˚ and it allows 62˚  
swivel adjustment from either left or right. You can also adjust the  
monitor’s height within +/- 15cm.  
-5 ~ 23  
15cm  
90  
90  
It is normal that the monitor slightly shakes while you adjust the viewing  
angle.  
ASUS LCD Monitor VG246 Series  
2-1  
3.1  
OSD (On-Screen Display) menu  
How to reconfigure  
3.1.1  
ASUS VG246H  
Racing Mode VGA 1920 x 1080 @ 60Hz  
GameVisual  
Scenery Mode  
Racing Mode  
Cinema Mode  
RTS/RPG Mode  
FPS Mode  
sRGB Mode  
MOBA Mode  
1. Press the MENU button to activate the OSD menu.  
2. Press the and buttons to toggle between options in the  
Menu. As you move from one icon to another, the option name is  
highlighted.  
3. To select the highlighted item on the menu press the  
4. Press the and buttons to select the desired parameter.  
5. Press the button to enter the slide bar and then use the or  
button.  
buttons, according to the indicators on the menu, to make your  
changes.  
6. Select the  
to return to previous menu or  
to accept and return to  
previous menu.  
2-2  
Chapter 2: Setup  
3.1.2  
1. GameVisual  
This function contains seven sub-functions that you can select for  
OSD Function Introduction  
your preference. Each mode has the Reset selection, allowing you to  
maintain your setting or return to the preset mode.  
ASUS VG246H  
Racing Mode VGA 1920 x 1080 @ 60Hz  
GameVisual  
Scenery Mode  
Racing Mode  
Cinema Mode  
RTS/RPG Mode  
FPS Mode  
sRGB Mode  
MOBA Mode  
Scenery Mode: This is the best choice for scenery photo displaying with  
GameVisual™ Video Intelligence Technology.  
Racing Mode: This is the best choice for racing game playing with  
GameVisual™ Video Intelligence Technology.  
Cinema Mode: This is the best choice for movie watching with  
GameVisual™ Video Intelligence Technology.  
RTS/RPG Mode: This is the best choice for Real-Time Strategy(RTS)/  
Role-Playing Game(RPG) playing with GameVisual™ Video Intelligence  
Technology.  
FPS Mode: This is the best choice for First Person Shooter game playing  
with GameVisual™ Video Intelligence Technology.  
sRGB Mode: This is the best choice for viewing photos and graphics  
from PCs.  
MOBA Mode : This is the best choice for Multiplayer Online Battle  
Arena (MOBA) games playing with GameVisual™ Video intelligence  
Technology.  
In the Racing Mode, the Saturation, Sharpness, and ASCR functions are not  
user-configurable.  
In the sRGB, the Saturation, Skin Tone, Color Temp., Sharpness, Brightness,  
Contrast and ASCR functions are not user-configurable.  
In the MOBA Mode, the Saturation, Sharpness and ASCR functions are not  
user-configurable.  
ASUS LCD Monitor VG246 Series  
3-1  
2. Blue Light Filter  
Adjust the energy level of blue light emitted from LED backlight.  
ASUS VG246H  
Racing Mode VGA 1920 x 1080 @ 60Hz  
Blue Light Filter  
Level 0  
Level 1  
Level 2  
Level 3  
Level 4  
Level 0: No change.  
Level 1~4: The higher the level,the more blue light will be reduced.  
When Blue Light Filter is activated,the default settings of Standard Mode will  
be automatically imported.  
Between Level 1 to Level 3, the Brightness function is user-configurable.  
Level 4 is optimized setting. It is compliance with TUV Low Blue Light  
Certification. The Brightness function is not user-configurable.  
Please refer to the following to alleviate eye strains:  
Users should take some time away from the display if working for long hours.  
It is advised to take short breaks (at least 5 mins) after around 1 hour of  
continuous working at the computer. Taking short and frequent breaks is more  
effective than a single longer break.  
To minimize eye strain and dryness in your eyes, users should rest the eye  
periodically by focusing on objects that are far away.  
Eye exercises can help to reduces eye strain. Repeat these exercises often. If  
eye strain continues please consult a physician. Eye exercises: (1) Repeating  
look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.  
High energy blue light may lead to eye strain and AMD (Age-Related Macular  
Degeneration). Blue light filter to reduce 70% (max.) harmful blue light to  
avoiding CVS (Computer Vision Syndrome).  
3-2  
Chapter 3: General Instruction  
3. Color  
Select the image color you like from this function.  
ASUS VG246H  
Racing Mode VGA 1920 x 1080 @ 60Hz  
Color  
Brightness  
Contrast  
Saturation  
Color Temp.  
Skin Tone  
Brightness: The adjusting range is from 0 to 100.  
Contrast: The adjusting range is from 0 to 100.  
Saturation: The adjusting range is from 0 to 100.  
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)  
and User Mode.  
Skin Tone: Contains three color modes including Reddish, Natural, and  
Yellowish.  
In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-  
configurable; the adjusting range is from 0 ~ 100.  
ASUS LCD Monitor VG246 Series  
3-3  
4. Image  
You can adjust the image Sharpness, Trace Free, Aspect Control,  
VividPixel, ASCR, AMD FreeSync, ELMB, Shadow Boost, Position  
(VGA only), Focus (VGA only), and Auto Adjust (VGA only), from this  
main function.  
ASUS VG246H  
Racing Mode VGA 1920 x 1080 @ 60Hz  
Image  
Sharpness  
Trace Free  
Aspect Control  
VividPixel  
ASCR  
AMD FreeSync  
ELMB  
More  
ASUS VG246H  
Racing Mode VGA 1920 x 1080 @ 60Hz  
Image  
Back  
Shadow Boost  
Position  
Focus  
Auto Adjust  
Sharpness: Adjusts the picture sharpness. The adjusting range is from  
0 to 100.  
Trace Free: Speeds up the response time by Over Drive technology. The  
adjusting range is from lower 0 to faster 100.  
Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”.  
VividPixel: ASUS Exclusive Technology that brings lifelike visuals for  
crystal-clear and detail-oriented enjoyment. The adjusting range is from  
0 to 100.  
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio  
function.  
3-4  
Chapter 3: General Instruction  
AMD FreeSync: It can allow a AMD FreeSync supported graphics source  
to dynamically adjust display refresh rate based on typical content frame  
rates for power efficient, virtually stutter free and low-latency display  
update.  
ELMB: Check to decrease motion blur and minimize ghosting part when  
on-screen objects are fast moving. When this function is turned on, the  
screen may flash slightly and the brightness will decrease.  
More: Return the next page of Image Setting.  
Back: Return the previous page of Image Setting.  
Shadow Boost: Dark color enhancement adjust monitor gamma curve to  
enrich the dark tones in an image making dark scenes and objects much  
easier be found.  
Position: Adjusts the horizontal position (H-Position) and the vertical  
position (V-Position) of the image. The adjusting range is from 0 to 100  
(Only available for VGA input).  
Focus: Reduces Horizonal-line noise and Vertical-line noise of the image  
by adjusting (Phase) and (Clock) separately. The adjusting range is from  
0 to 100 (Only available for VGA input).  
Auto Adjust.: Automatically adjust the image to its optimized position,  
clock, and phase. (Only available for VGA input.)  
4:3 is only available when input source is in 4:3 format.  
Phase adjusts the phase of the pixel clock signal. With a wrong phase  
adjustment, the screen shows horizontal disturbances.  
Clock (pixel frequency) controls the number of pixels scanned by one  
horizontal sweep. If the frequency is not correct, the screen shows vertical  
stripes and the image is not proportional.  
ELMB can be opened on the premise that refresh rate is 75Hz and AMD  
FreeSync is off.  
ASUS LCD Monitor VG246 Series  
3-5  
5. Sound  
Adjust the sound settings to your preference.  
ASUS VG246H  
Racing Mode VGA 1920 x 1080 @ 60Hz  
Sound  
Volume  
Mute  
Volume: Adjusts the output volume level.  
Mute: Mute the output volume.  
6. Input Select  
Select the input source from VGA, HDMI input signal.  
ASUS VG246H  
Racing Mode VGA 1920 x 1080 @ 60Hz  
Input Select  
VGA  
HDMI  
3-6  
Chapter 3: General Instruction  
7. System Setup  
Adjusts the system configuration.  
ASUS VG246H  
Racing Mode VGA 1920 x 1080 @ 60Hz  
System Setup  
GameVisual Demo Mode  
QuickFit  
ECO Mode  
OSD Setup  
Language  
Key Lock  
Information  
More  
ASUS VG246H  
Racing Mode VGA 1920 x 1080 @ 60Hz  
System Setup  
Back  
Power Indicator  
Power Key Lock  
All Reset  
GameVisual Demo Mode: Activate the demo mode for the GameVisual  
function.  
QuickFit: contains three patterns: (1) Grid (2) Paper size (3) Photo size.  
1. Grid pattern: Facilitates designers and users to organize  
content and layout on one page and achieve a consistent  
look and feel.  
Alignment Grid 1  
Alignment Grid 2  
ASUS LCD Monitor VG246 Series  
3-7  
2. Paper size: Provides users to view their documents in real  
size on the screen.  
B5  
Letter  
B5  
Letter  
EXIT  
EXIT  
3. Photo size: Provides photographers and other users to  
accurately view and edit their photos in real size on the  
screen.  
2x2  
8x10  
4x6  
3x5  
5x7  
ECO Mode: Activate the ecology mode for power saving.  
OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of  
the OSD screen.  
Language: Select OSD language. The selections are: English, French,  
German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croacia,  
Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional  
Chinese, Japanese, Korean, Persian, Thai, Indonesian.  
Key Lock: Disable all key functions. Pressing the second button on the  
right for more than five seconds to disable key lock function.  
Information:Displays the monitor information.  
More: Return the next page of System Setting.  
Back: Return the previous page of System Setting.  
Power Indicator: Turn the power LED indicator on/off.  
Power Key Lock: To disable / enable power key  
All Reset: Selects “Yes” to revert all settings to the factory default mode.  
3-8  
Chapter 3: General Instruction  
8. Shortcut  
Selecting this option allows you to set two shortcut keys.  
ASUS VG246  
Racing Mode VGA 1920 x 1080 @ 60Hz  
Shortcut  
Shortcut 1  
Shortcut 2  
Blue Light Filter  
GameVisual  
Brightness  
Auto Adjust  
Contrast  
Color Temp.  
Volume  
QuickFit  
Shortcut 1: User can select from “Blue Light Filter” “GameVisual”,  
“Brightness”, “Auto Adjust”, “Contrast”, “Color Temp.”, “Volume”,  
“QuickFit”, and set as shortcut key. The default setting is  
.GameVisual.  
Shortcut 2: User can select from “Blue Light Filter” “GameVisual”,  
“Brightness”, “Auto Adjust”, “Contrast”, “Color Temp.”, “Volume”,  
“QuickFit”, and set as shortcut key. The default setting is Blue  
Light Filter.  
ASUS LCD Monitor VG246 Series  
3-9  
3.2  
Model  
Specifications  
VG246H  
Panel Size  
23.8’’W(60.5cm)  
1920x1080@75Hz  
250cd/m2  
Max. Resolution  
Brightness (Typ.)  
Intrinsic Contrast Ratio  
(Typ.)  
1000:1  
Viewing Angle (CR>10)  
Display Colors  
Response Time  
Sound from HDMI  
HDMI input  
178°(H) /178°(V)  
16.7 M  
1ms(MPRT)  
Yes  
Yes  
D-Sub input  
Yes  
Audio Line-in  
No  
<15.08w  
Power ON Consumption  
(Mesauring a screen brightness of 200 nits Without audio  
/ USB / Card reader connection)  
Note  
*Based on Energy Star 7.0 standard  
Chassis Colors  
Power saving mode  
Power off mode  
Tilt  
Black  
< 0.5W  
< 0.5W  
-5° ~ +23°  
VESA Wall Mounting  
Yes (100mm x 100mm)  
Phys. Dimension with  
stand (WxHxD)  
540.5mm x 515mm x 217.6mm  
540.5mm x 325.2mm x 51.7mm  
Phys. Dimension without  
stand (WxHxD)  
(For VESA Wall Mount)  
Box Dimension (WxHxD)  
Net Weight (Esti.)  
723mm x 400mm x 200mm  
6.06 kg  
Gross Weight (Esti.)  
Voltage Rating  
8.07 kg  
AC 100~240V(Built-in)  
0~40℃  
Temperature(operation)  
3-10  
Chapter 3: General Instruction  
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the power cord is properly connected to  
the monitor and the power outlet.  
Check Power Indicator function in main menu OSD.  
Select “ON” to turn on power LED.  
The power LED lights amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly  
working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move electrical devices that may cause electrical  
interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
No sound or sound is low  
Make sure the audio cable is properly connected to  
the monitor.  
Adjust the volume settings of both your monitor and  
computer.  
Make sure the computer sound card driver is  
properly installed and activated.  
Make sure the audio source is correct on the OSD.  
ASUS LCD Monitor VG246 Series  
3-11  
3.4  
Supported Timing List  
PC Supported Primary Timing  
Resolution  
640x480  
640x480  
640x480  
800x600  
800x600  
800x600  
800x600  
1024x768  
1024x768  
1024x768  
1152x864  
1280x960  
1280x1024  
Refresh Rate  
Horizontal Frequency  
31.469kHz  
37.861kHz  
37.5kHz  
60Hz  
72Hz  
75Hz  
56Hz  
60Hz  
72Hz  
75Hz  
60Hz  
70Hz  
75Hz  
75Hz  
60Hz  
60Hz  
35.156kHz  
37.879kHz  
48.077kHz  
46.875kHz  
48.363kHz  
56.476kHz  
60.023kHz  
67.5kHz  
60kHz  
63.981kHz  
1280x1024  
1440x900  
1680x1050  
1920x1080  
1920x1080  
75Hz  
60Hz  
60Hz  
60Hz  
75Hz  
79.976kHz  
55.935kHz  
65.29kHz  
67.5kHz  
83.894kHz  
MAC Modes, Factory Preset Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
640x480  
67Hz  
35kHz  
VESA Modes, User Available Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
1280x720(RB)  
1280x720  
1280x720  
1680x1050(RB)  
1920x1080  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
44.444kHz  
44.772kHz  
56.456kHz  
64.674kHz  
66.587kHz  
SD/HD Timings  
HDMI1.4,CEA-861B Formats, SD/HD Supported Primary Timings of (HDMI input  
only)  
Resolution  
Refresh Rate  
Horizontal Frequency  
640 x 480 P  
720 x 480 P  
720 x 576 P  
1280 x 720 P  
1280 x 720 P  
59.94/60Hz  
59.94/60Hz  
50Hz  
50Hz  
59.94/60Hz  
31.469/31.5kHz  
31.469/31.5kHz  
31.25kHz  
37.5kHz  
44.955/45kHz  
3-12  
Chapter 3: General Instruction  
HDMI1.4,CEA-861B Formats, SD/HD Supported Optional Timings of (HDMI input  
only)  
Resolution  
Refresh Rate  
Horizontal Frequency  
1440x480P  
1440x576P  
1920x1080P  
1920x1080P  
59.94 / 60Hz  
50Hz  
50Hz  
59.94 / 60Hz  
31.469 / 31.5kHz  
31.25kHz  
56.25kHz  
67.433 / 67.5kHz  
* The modes not listed in the above tables may not be supported. For optimal resolution, we  
recommend that you choose a mode listed in the above tables.  
ASUS LCD Monitor VG246 Series  
3-13  

Xerox Freeflow Dst2 Nl User Manual
Soleus Air Air Conditioner Gl Pac 08e4 User Manual
Siig 2400 User Manual
Samsung Aqv12j User Manual
Philips Nor Found 15lc118 User Manual
Mitsubishi Mr Slim Pch42ek User Manual
CRAFTSMAN 247.776350 User Manual
CANON TS700 User Manual
CANON S530D User Manual
ACER EXTENSA 7220 User Manual