Direction for product use
Content
1
Use environment
Operation temperature
-13°F to 131°F（-25°C to 55°C）。
Waterproof rate
Domestic waterproof
Can be used for daily wash or use in the rain,
That is, water drops only splash on the surface
rather than impose on the device.
Battery
5 days of normal use.
2
Articles in the box
A
B
C
D
E
A: Bracelet
B: Bracelet buckle
C: Quick user guide
D: Charging clip
E: Manual
3
Overview of the setup
1. Charging
2. APP setup
3. Device operation
4. Screen operation
5. Device function
6. Setup
7. Service and support
4
Charging
Please charge the bracelet for two hours before the initial use.
Connect with the charger.
Please connect the charger with your bracelet.
Button
5
Charging
Connect with the charger.
The charger touch spot is well-matched with the touch spot
of the bracelet, and the two can be fitted together.
6
Charging
Insert the Micro-USB interface in the bracelet battery base.
Plug the USB connection line into the power.
The screen will show the charging icon. When the electricity
is full, the full charge icon will be shown by the screen.
It takes one and a half hour for full charge. When the electric
quantity of the battery is not enough, the screen will display
the low-energy icon
7
Acquire the APP
If it is to use the mobile device to set the bracelet, you have
to acquire the bracelet App first by searching 3PLUS ELITE
Tracker in the App store or Android application store,
downloading and installing the App in your mobile device.
iOS 7+，Bluetooth 4.0 BLE，iPhone 4s+，iPad3+，
iPad Mini+，iPod touch5+
Android 4.3 + ，Bluetooth 4.0 BLE
8
Connect the APP
1. Turn on the Bluetooth function of your mobile device;
2. Turn on the 3PLUS ELITE App on your mobile device;
If you are a new member, please register or log on via an
existing account. After inputting your personal information,
please click the setup;
3. Please make sure the bracelet is close to the device, and
select LITE from the Bluetooth list;
4. The pairing demand will be displayed on your mobile device.
Press the watch screen to accept the pairing;
5. After pairing successfully by the bracelet, your bracelet and
mobile device will receive a notice.
If the pairing fails, please repeat the same step.
The pairing is a one-time process. If you want to pair with the
watch with other accounts, please cancel the existing pairing
first.
9
Wear the device
Fasten the watchband
Wear the watchband on your wrist, fasten the buckle, and
make the buckle pin pass through the watchband hole.
Suggestion:
Add a few drops of water on the watchband hole will make
it easier to be buckled up.
10
Awakening device
Click the button to activate the screen.
The bracelet screen will be turned off when it is not in use.
Please click the button to awaken the device.
11
Screen operation
All screen operations are completed by using your fingertip to
click the bracelet button.
Click to switch the interface.
Long click to enter into/ withdraw from the sleep mode.
Tips:
If you are not sure what to do on a specific screen, try clicking
the button to switch to another screen.
12
Main menu
Time, date
Step
Distance
Calorie
Click the button to switch the interface.
13
Clock interface
Time, date, electric quantity
The time and date of the bracelet will synchronize with your
paired mobile device automatically.
You may manually set the time and date you like via the
setting of 3PLUS ELITE App.
Please confirm your bracelet is fully charged to avoid time
reset.
14
Step, calorie, distance
Step
Distance
Calorie
The whole-day walking steps, distance and burnt calorie of
yours can be monitored by the bracelet, and you may click
the touch screen display area and check the data displayed
on the bracelet, or you may monitor your activity data and
historic records via the “activity” option in the 3PLUS ELITE
App. You can check your daily target completion process
through the main activity picture, and see the detailed
figures of your daily, weekly and monthly performance by
clicking the activity column. The daily data can be displayed
by the bracelet. The activity monitor will reset every day at
midnight. If you need to upload the latest activity data of
yours, please remember to click the upper right
synchronization icon of the 3PLUS ELITE App.
15
Sleep mode
When the screen is lightened, long click the screen to enter
to the sleep mode.
Time
Sleep icon
Click the button to switch the interface.
16
Electric quantity
Check the electric quantity of the battery on the main interface
To achieve the optimal use effect, the electric quantity of the
battery should not be lower than 10%.
17
Notice
Calendar matter reminding
Message reminding
Bluetooth disconnection reminding
Email reminding
Missed call reminding
Social contact message reminding
The bracelet can display calls, missed calls, messages,
emails, social contact media activities, calendar matters and
anti-loss notices. Open the 3PLUS ELITE App, click
“setup＞notice”, and select the notice you want the watch to
receive. If you want to stop using some notices, please slide
the radio button to the left and click the bracelet screen to
neglect the notice, otherwise, the notice will show up again
next time when the screen is activated.
18
Caller identification
The caller identification only supports Latin characters.
19
Remind
Sport
Wake up
Sleep
Medicine
Eat
Reminder
Click the “remind” option of 3PLUS ELITE App to add daily
reminding. You can set 6 kinds of daily reminding for the
most, and you may select the provision type, preference time
and date. Your bracelet will vibrate slightly and display the
corresponding reminding icon to remind you. Click the
bracelet to neglect the reminding. If not, the reminding will
appear two minutes later.
20
Target
Click the “target” option of the 3PLUS ELITE App to set the
target of daily walking step, walking distance, burnt calorie
and sleep hours. Click the synchronization button on the
upper right to save your target setting. When the target is
reached, your watch will vibrate slightly and display the
target completion icon.
21
Customer support
Customer support is ready to help.
22
Troubleshooting
Data synchronization failure by the APP
1. Please check if the network and Bluetooth of your mobile
phone have been turned on. The network and Bluetooth of
your mobile phone need to be turned on at the same time for
data synchronization.
2. Please check if the bracelet is near the mobile phone and
the connection distance is within 5 meters.
3. Please confirm the binding with your bracelet is successful.
Failure of bracelet binding by the APP
1. Please check if the network and Bluetooth of your mobile
phone have been turned on. The network and Bluetooth of
your mobile phone need to be turned on at the same time for
watch binding.
2. Please check if the bracelet is near the mobile phone and
the connection distance is within 5 meters.
3. Please check the bracelet has not bound with other
accounts.
Contact us
If your problem cannot be resolved by the above ways,
please contact us by emails.
23
Supporting devices
iOS
iPhone 6 , iPhone 6+ , iPhone 5c ,
iPhone 5s , iPad Mini, iPhone 4s, etc.
Android
HTC One M9，HTC M8T，HTC D610t，
Samsung S6，Samsung Galaxy Note 4，
Samsung S5，Samsung Galaxy Note 3，
Samsung S4，Samsung Galaxy Note 2，
Samsung S3，Sony Xperia Z2，VIVO 3S，
LG G2，LG G3，HUAWEI P7，OPPO Find7，
Nexus 5，MOTO X，iSWAG MAGNET47, etc.
24
Product specifications
Size: 16.6mm (width) *10.7mm (thickness)，
139~195mm (inner perimeter)
Material: face shell: PC resin, watchband: TPU flexible glue
Display screen: OLED, 0.91 inch, 128*32 lattice
Sensor: three-axis acceleration sensor
Vibration motor: supportive
Bluetooth: Bluetooth 4.0 BLE
Battery: 55mAh
Time display: RTC+ time synchronization
Charging way: USB charging clip
Weight: about 20g
Waterproof rate: domestic waterproof
25
26
|