561908-YTG-A-0410
DESCRIPTION
The 13 SEER Series unit is the outdoor part of a versatile cli-
mate system. It is designed with a matching indoor coil compo-
nent from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with acces-
sories and documents to serve specific functions.
FEATURES
• Quality Condenser Coils - The coil is constructed of alumi-
num microchannel tubing and enhanced aluminum fins for
increased efficiency and corrosion protection.
TECHNICAL GUIDE
SPLIT-SYSTEM
• Protected Compressor - The compressor is internally pro-
tected against high pressure, temperature, and externally by
a factory installed high pressure switch. This is accomplished
by the simultaneous operation of high pressure relief valve
and a temperature sensor which protects the compressor if
undesirable operating conditions occur. A liquid line filter-
drier further protects the compressor.
AIR CONDITIONERS
13 SEER – R-410A – 1 PHASE
MODELS:
YCJD18 THRU 60
(1.5 THRU 5 NOMINAL TONS)
• Durable Finish - The cabinet is made of pre-painted steel.
The pre-treated galvanized steel provides a better paint to
steel bond, which resists corrosion and rust creep. Special
primer formulas and matted-textured finish insure less fading
when exposed to sunlight.
• Lower Installed Cost - Installation time and costs are
reduced by easy power and control wiring connections.
Available in sweat connect models only. The unit contains
enough refrigerant for matching indoor coils and 15 feet of
interconnecting piping. The small base dimension means
less space is required on the ground or roof.
• Top Discharge - The warm air from the top mounted fan is
blown up away from the structure and any landscaping. This
allows compact location on multi-unit applications.
• Low Operating Sound Level - The upward air flow carries
the normal operating noise away from the living area. The
rigid top panel effectively isolates any motor sound. Isolator
mounted compressor and the rippled fins of the condenser
coil muffle the normal fan motor and compressor operating
sounds.
• Low Maintenance - Long life permanently lubricated motor-
bearings need no annual servicing.
LISTED
• Easy Service Access - Fully exposed refrigerant connec-
tions, and a single panel covering the electrical controls
make for easy servicing of the unit.
• Secured Service Valves - Secured re-usable service valves
are provided on both the liquid and vapor sweat connections
for ease of evacuating and charging.
Due to continuous product improvement, specifications are
subject to change without notice.
• U.L. and C.U.L. listed - approved for outdoor application.
• Agency Listed - U.L. and C.U.L. listed - approved for out-
door application. The unit is certified in accordance with the
Unitary Small Equipment certification program, which is
based on ARI Standard 210/240.
Additional rating information can be found at
WARRANTY
Standard 5-year limited parts warranty.
10-year limited compressor warranty.
Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replace-
ment or closing for new home construction.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
561908-YTG-A-0410
System Charge for Various Matched Systems
YCJD18S41
YCJD24S41
YCJD30S41
YCJD36S41
YCJD42S41
YCJD48S41
Outdoor Unit
YCJD60S41S3
S3(H)
S3(H)
S3(H)
S3(H)
S3(H)
S3(H)
0.073/4H1
4 - 9
Required Orifice or TXV 1,2
Factory Charge, lbs-oz
0.048/4F1
3 - 3
0.055/4F1
3 - 13
0.061/4F1
3 - 14
0.065/4G1
4 - 9
0.075/4G1
4 - 5
0.087/4J1
5 - 6
Indoor Coil3,4
AHP18
Additional Charge, oz
0
–
4
–
–
–
–
4
4
–
–
–
–
4
–
–
–
0
–
–
–
–
–
4
4
–
–
–
–
4
4
0
4
4
–
–
–
–
0
4
4
–
–
0
–
–
–
0
2
–
–
–
0
2
–
–
–
–
2
–
–
–
–
0
–
–
–
–
0
0
–
–
–
–
0
0
–
2
2
–
–
–
–
–
0
2
–
–
–
–
–
–
–
0
0
–
–
–
0
8
–
–
–
0
–
–
–
–
–
–
8
–
–
–
–
8
–
–
–
–
–
–
0
0
8
–
–
–
–
–
0
–
–
–
8
–
–
–
–
0
–
–
–
–
2
–
–
–
–
–
–
–
0
–
–
–
–
0
–
–
–
0
–
–
–
–
0
4
0
–
–
–
–
0
–
–
–
–
–
–
–
4
0
–
–
–
–
–
–
–
–
4
0
–
–
–
–
0
–
–
–
–
–
4
–
–
–
0
–
–
–
0
–
0
–
–
–
–
–
4
–
–
–
–
–
–
–
0
4
–
–
–
–
0
–
–
–
0
AHP30
AHP36
AHP42
AHP/SHP60
AHX18
AHX30
AHX36
AHX42
AHX48
–
–
–
–
0
–
–
–
–
–
AHX60
AV*24
AV*36
TXV + 0
–
–
–
0
–
–
–
–
–
0
–
–
–
–
–
0
–
–
–
–
–
–
–
–
0
–
–
–
–
0
–
–
–
–
AV/SV*48
AV/SV*60
F4FP024
F4FP036
F4FP040
F4FV060
F5FP048
F5FP060
F6FP018
F6FP030
F6FP036
F6FP042
F6FP048
F6FP060
FC/MC/PC/18
FC/MC/PC32
FC/MC/PC35
FC/MC/PC/36
FC/MC/PC37
FC/MC/PC43
FC/MC/PC48
FC/MC/PC60
FC/MC62
HC18
TXV + 2
TXV + 2
–
–
–
–
2
–
–
–
–
2
TXV + 2
–
–
–
–
–
–
0
2
–
–
–
–
–
0
–
–
–
2
–
HC30
HC36
HC42
HC60
UC18
UC36
UC48
UC60
FOOTNOTES:
1. For applications requiring a TXV use 1TVM series kit.
2. Approved orifice shipped with outdoor unit.
3. Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit 2FD06700224.
4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of interconnecting
line tubing.
2. Verify the TXV and additional charge required for specific evaporator coil in the system using the above table.
3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For orifice or TXV matches requiring additional charge, the refrigerant needs to be weighed in for specific coil match and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evaporator +
adder for line set.
Models 12-48 require start kits for TXV matches. Models with “H” on the end of the model number have factory installed start kits. For
models without an “H” refer to tech guide for kit number reference.
Johnson Controls Unitary Products
3
561908-YTG-A-0410
COOLING CAPACITY - With Air Handler Coils
AIR HANDLER
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
W
SEER
EER
TOTAL
SENS.
13 SEER AC WITH MA
YCJD18S41S3(H)
YCJD24S41S3(H)
MA08B
MA08B
MA08B
MA08B
MA12B
MA12B
MA12B
MA14D
MA16C
MA14D
MA16C
MA16C
MA20D
MA16C
MA20D
MA20D
MA20D
17
17
17
17
17
17
17
24
21
24
21
21
24
21
24
24
24
FC/MC18B
FC/MC36B
FC/MC35B
FC/MC43B
FC/MC35B
FC/MC43B
FC/MC43B
FC/MC48D
FC/MC43C
FC/MC48D
FC/MC48C
FC/MC48C
FC/MC48D
FC60C
600
800
17.5
24.0
24.0
24.0
29.0
29.0
35.0
35.0
42.0
42.0
42.0
48.0
48.0
48.0
48.0
57.0
57.0
12.9
16.7
16.7
16.7
21.0
21.0
24.8
24.8
29.2
29.2
29.2
34.4
34.4
34.4
34.4
38.5
38.5
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
800
800
1000
1000
1200
1200
1400
1400
1400
1600
1600
1600
1600
1800
1800
YCJD30S41S3(H)
YCJD36S41S3(H)
YCJD42S41S3(H)
YCJD48S41S3(H)
YCJD60S41S3
FC/MC60D
FC/MC60D
FC/MC62D
13 SEER AC WITH MV - VARIABLE SPEED
YCJD18S41S3(H)
YCJD24S41S3(H)
MV12B
MV12B
MV12B
MV12B
MV12B
MV16C
MV12B
MV16C
MV16C
MV16C
MV20D
MV12D
MV16C
MV16C
MV20D
MV16C
MV20D
MV20D
MV20D
MV20D
17
17
17
17
17
21
17
21
21
21
24
24
21
21
24
21
24
24
24
24
FC/MC18B
FC/MC36B
FC/MC35B
FC/MC43B
FC/MC35B
FC/MC35C
FC/MC43B
FC/MC43C
FC/MC43C
FC/MC48C
FC/MC48D
FC/MC48D
FC/MC43C
FC/MC48C
FC/MC48D
FC/MC48C
FC/MC48D
FC/MC60D
FC/MC60D
FC/MC62D
600
800
17.5
24.0
24.0
24.0
29.0
30.0
29.0
30.0
36.0
36.0
36.0
35.0
42.0
42.0
42.0
48.0
48.0
48.0
57.0
57.0
13.3
17.4
17.4
17.3
21.6
21.6
21.6
21.6
25.4
25.4
25.6
25.4
30.0
30.0
30.0
35.0
35.0
35.0
38.5
38.5
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
13.50
13.50
14.00
13.50
13.50
13.50
13.00
13.00
12.50
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
11.00
11.00
800
800
1000
1000
1000
1000
1200
1200
1200
1135
1400
1400
1400
1600
1600
1600
1800
1800
YCJD30S41S3(H)
YCJD36S41S3(H)
YCJD42S41S3(H)
YCJD48S41S3(H)
YCJD60S41S3
13 SEER AC WITH AV / SV / F*FV - VARIABLE SPEED
YCJD18S41S3(H)
YCJD24S41S3(H)
YCJD30S41S3(H)
YCJD36S41S3(H)
AV*24
AV*36
17
21
21
21
24
24
24
24
24
24
24
–
–
–
–
–
–
–
–
–
–
–
610
725
18.0
24.0
30.0
35.0
42.0
42.0
48.0
48.0
47.0
57.0
56.5
13.5
17.4
21.8
25.2
29.8
29.8
35.0
35.0
34.6
39.0
38.5
14.50
14.50
14.50
13.50
14.00
14.00
13.50
13.50
13.40
13.50
13.00
12.00
12.00
12.00
11.50
12.00
12.00
11.50
11.50
11.30
11.50
11.00
AV*36
960
AV*36
1190
1385
1360
1625
1560
1600
1730
1780
AV/SV*48
AV/SV*60
AV/SV*48
AV/SV*60
F4FV060
AV/SV*60
F4FV060
YCJD42S41S3(H)
YCJD48S41S3(H)
YCJD60S41S3
For Notes See Page 5.
4
Johnson Controls Unitary Products
561908-YTG-A-0410
COOLING CAPACITY - With Air Handler Coils (Continued)
AIR HANDLER
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
W
SEER
EER
TOTAL
SENS.
13 SEER AC WITH AHP / SHP / AHX / F*FP
AHP18
AHX18
17
17
18
17
17
17
21
21.5
17
21
17
21
17
21
18
17
21
21
21
21
21
24
21
21
21
24
21
24
24
24
24
24
24
24
24
24
24
24
–
-
650
630
17.5
18.0
17.5
17.8
24.0
24.0
24.0
24.0
24.0
24.0
29.0
29.0
29.4
30.0
29.0
29.2
29.4
35.0
35.0
35.2
35.4
35.0
35.8
41.0
42.0
41.0
42.0
41.5
48.0
48.0
48.0
48.0
48.0
47.0
57.0
58.5
57.0
57.5
12.9
13.8
12.9
13.3
16.8
16.9
16.9
16.7
16.8
17.0
21.0
21.0
22.2
22.3
21.0
21.6
21.4
24.8
24.8
25.0
25.2
24.8
25.8
29.2
29.9
29.2
30.1
29.4
34.4
35.0
35.4
34.4
34.4
34.8
38.5
40.0
38.5
39.0
13.00
14.50
13.00
14.50
13.00
14.50
14.50
13.00
14.00
14.00
13.00
13.00
14.00
14.50
13.00
13.50
14.00
13.00
13.00
13.50
14.00
13.00
13.50
13.00
14.50
13.00
14.00
13.50
13.00
13.50
13.50
13.00
13.00
13.00
13.00
13.50
13.00
13.50
11.00
12.00
11.00
12.00
11.00
12.00
12.00
11.00
11.80
12.00
11.00
11.00
11.75
12.00
11.00
11.40
12.00
11.00
11.00
11.50
11.80
11.00
11.50
11.00
12.00
11.00
11.75
11.70
11.00
11.00
11.50
11.00
11.00
11.30
11.00
11.50
11.00
11.50
YCJD18S41S3(H)
YCJD24S41S3(H)
F4FP024
F6FP018
AHP30
–
-
600
600
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
795
AHX30
820
AHX36
815
F4FP036
F6FP030
F6FP036
AHP30
800
850
855
1015
1040
1025
1005
1050
1035
980
AHP36
AHX30
YCJD30S41S3(H)
AHX36
F4FP040
F6FP030
F6FP036
AHP36
1235
1255
1225
1190
1235
1290
1485
1395
1455
1455
1380
1675
1600
1660
1600
1600
1625
1850
1905
1900
1710
AHP42
AHX36
YCJD36S41S3(H)
YCJD42S41S3(H)
AHX42
F5FP048
F6FP042
AHP42
AHX42
F5FP048
F6FP042
F6FP048
AHP/SHP48
AHP/SHP60
AHX48
YCJD48S41S3(H)
YCJD60S41S3
F5FP048
F5FP060
F6FP048
AHP/SHP60
AHX60
F5FP060
F6FP060
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.
Cooling MBH based on 8°F entering air temperature, 50% RH, and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power
input in watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
— = Not applicable.
Johnson Controls Unitary Products
5
561908-YTG-A-0410
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils
FURNACE**
COOLING
NET MBH
COIL
MODEL
UNIT MODEL
CFM RANGE
(Min.-max.)
RATED
CFM
W
SEER1
EER
TOTAL
17.5
17.5
17.5
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
29.0
29.0
29.0
29.0
29.0
29.0
35.0
35.0
35.0
35.0
35.0
42.0
42.0
42.0
42.0
49.0
48.0
48.0
48.0
48.0
57.0
57.0
57.0
57.0
SENS.
12.9
12.9
12.9
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
16.7
21.0
21.0
21.0
21.0
21.0
21.0
24.8
24.8
24.8
24.8
24.8
29.2
29.2
29.2
29.2
35.4
34.4
34.4
34.4
34.4
38.5
38.5
38.5
38.5
450 - 750
450 - 750
14,17
14
FC/MC/PC18
HC18
600
600
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.20
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.65
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
YCJD18S41S3(H)
450 - 750
14,17
14
UC18
600
600 - 1000
600 - 1000
600 - 1000
600 - 1000
600 - 1000
600 - 1000
600 - 1000
600 - 1000
600 - 1000
800 - 1200
800 - 1200
800 - 1200
800 - 1200
800 - 1200
800 - 1200
1000 - 1400
1000 - 1400
1000 - 1400
1000 - 1400
1000 - 1400
1200 - 1600
1200 - 1600
1200 - 1600
1200 - 1600
1400 - 1800
1400 - 1800
1400 - 1800
1400 - 1800
1400 - 1800
1600 - 2000
1600 - 2000
1600 - 2000
1600 - 2000
FC/MC/PC32
FC/MC/PC35
FC/MC/PC36
FC/MC/PC37
FC/MC/PC43
HC30
800
17,21
14,17,21
14
800
800
800
YCJD24S41S3(H)
17,21
14
800
800
17
HC36
800
21
HC42
800
14,17,21
14
UC36
800
FC/MC/PC32
FC/MC/PC35
FC/MC/PC37
FC/MC/PC43
HC36
1000
1000
1000
1000
1000
1000
1200
1200
1200
1200
1200
1400
1400
1400
1400
1600
1600
1600
1600
1600
1800
1800
1800
1800
17,21
14
YCJD30S41S3(H)
17,21
17
21
HC42
14
FC/MC/PC37
FC/MC/PC43
FC/MC/PC48
HC42
17,21
21,24
21
YCJD36S41S3(H)
YCJD42S41S3(H)
YCJD48S41S3(H)
YCJD60S41S3
21,24
17,21
21,24
21
UC48
FC/MC/PC43
FC/MC/PC48
HC42
21,24
21,24
21,24
24
UC48
FC/MC/PC48
FC/MC/PC60
HC60
21,24
21,24
21,24
24
UC48
UC60
FC/MC/PC60
FC/MC62
HC60
24
21,24
UC60
1. Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
** Refer to Quick Selection Chart for specific furnace match-up.
6
Johnson Controls Unitary Products
561908-YTG-A-0410
COOLING CAPACITY - With High Efficiency Motor Furnaces
COOLING
Net MBH
FURNACE
MODEL
COIL
MODELS
W
RATED
CFM
MODEL1
SEER
EER
TOTAL
SENS.
13 SEER HP WITH VARIABLE SPEED FURNACES2
T*(8,L)X*A12
T*(8,L)X*B12
FC/MC/PC18A
FC/MC/PC18B
FC/MC/PC18B
UC18A
14
17
17
14
17
17
14
17
17
14
14
17
17
14
17
21
21
14
17
17
21
21
14
17
14
17
17
14
17
17
14
17
17
14
17
17
14
17
17
14
17
21
21
17
21
14
17
21
21
17
21
540
580
590
590
595
590
620
580
610
620
620
580
610
800
850
715
825
815
835
775
770
810
840
865
775
760
815
805
765
815
805
760
800
775
760
815
805
765
815
970
1120
1105
850
1085
1075
1105
1125
710
870
1095
1055
17.7
18.0
18.0
18.0
18.0
18.0
17.5
17.5
17.5
17.5
17.5
17.5
17.5
24.0
24.0
23.8
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
23.8
24.0
24.0
23.6
23.6
23.6
29.2
30.0
30.0
28.8
29.8
29.8
30.0
30.0
28.2
29.6
30.0
30.0
12.9
13.4
13.4
13.4
13.4
13.4
12.7
12.6
12.8
12.8
12.7
12.5
12.6
16.9
17.0
16.3
17.0
16.8
16.8
16.8
16.8
16.8
17.0
17.0
17.0
16.8
17.1
16.9
17.0
16.9
17.0
16.9
17.0
16.8
16.8
17.2
16.6
16.7
16.7
21.4
22.8
22.8
20.6
22.8
22.4
22.9
22.9
19.3
21.2
22.9
22.9
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
13.80
14.00
14.00
13.80
14.00
13.80
13.20
14.00
14.00
14.00
14.00
14.00
13.80
14.00
14.00
14.00
13.80
14.00
12.50
12.50
12.50
12.00
12.00
12.00
12.50
12.00
12.50
12.00
12.00
12.00
12.50
11.50
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
11.50
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
11.50
12.00
12.00
11.50
11.50
11.50
11.00
11.50
12.00
12.00
12.00
12.00
11.50
12.00
12.00
12.00
11.50
12.00
T*9X*B12
T*(8,L)X*A12
T*(8,L)X*B12
UC18B
T*9X*B12
UC18B
YCJD18S41S3(H)
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
T*(8,L)X*A12
FC/MC/PC18A
FC/MC/PC18B
FC/MC/PC18B
HC18
UC18A
UC18B
UC18B
FC/MC/PC32A
FC/MC/PC35B
FC/MC/PC35C
FC/MC/PC35C
FC/MC/PC36A
FC/MC/PC36B
FC/MC/PC36B
FC/MC/PC36C
FC/MC/PC36C
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC32A
FC/MC/PC35B
FC/MC/PC35B
FC/MC/PC36A
FC/MC/PC36B
FC/MC/PC36B
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43B
HC30
T*(8,L)X*B12
T*9X*C16
T*9X*C20
T*(8,L)X*A12
T*(8,L)X*B12
T*9X*B12
T*9X*C16
T*9X*C20
T*(8,L)X*A12
T*(8,L)X*B12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
T*(8,L)X*A12
YCJD24S41S3(H)
HC36
HC36
UC36A
UC36B
UC36B
FC/MC/PC32A
FC/MC/PC35B
FC/MC/PC35C
FC/MC/PC35C
FC/MC/PC35B
FC/MC/PC35C
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43B
FC/MC/PC43C
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*B12
T*9X*C16
YCJD30S41S3(H)
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*B12
T*9X*C16
For Notes See Page 10.
Johnson Controls Unitary Products
7
561908-YTG-A-0410
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
COOLING
Net MBH
FURNACE
MODEL
COIL
MODELS
W
RATED
CFM
MODEL1
SEER
EER
TOTAL
SENS.
13 SEER HP WITH VARIABLE SPEED FURNACES2
T*9X*C20
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
T*(8,L)X*A12
FC/MC/PC43C
FC/MC/PC32A
FC/MC/PC35B
FC/MC/PC35B
FC/MC/PC35C
FC/MC/PC35C
FC/MC/PC35C
FC/MC/PC35C
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43C
HC36
21
14
17
17
21
21
21
21
14
17
17
21
21
21
21
17
17
21
21
21
21
14
17
21
21
17
21
21
21
21
21
21
24
21
21
21
21
24
14
17
17
21
21
21
21
21
21
21
21
24
21
720
1045
995
28.2
29.2
29.6
29.4
29.6
30.0
29.6
29.6
29.8
30.0
30.0
30.0
30.0
30.0
30.0
29.6
29.4
30.0
30.0
30.0
30.0
35.2
35.2
35.2
35.6
35.2
35.4
35.0
35.6
35.8
35.8
35.4
35.4
34.2
34.8
34.6
34.0
34.0
33.8
35.2
35.2
35.6
35.6
35.4
35.6
36.0
36.0
36.0
36.0
36.0
35.6
19.3
21.8
21.4
22.0
22.0
22.4
22.0
22.0
21.8
22.0
22.0
22.1
22.1
22.0
22.1
21.4
22.0
22.1
22.1
22.0
22.1
25.4
25.4
24.8
25.6
25.4
25.4
24.6
25.2
25.8
25.8
25.0
25.0
24.8
25.4
24.8
24.6
24.6
23.0
25.2
25.2
25.4
25.4
25.2
25.4
26.0
26.1
26.0
26.5
26.2
25.4
14.00
13.20
14.00
13.50
14.00
14.00
14.00
14.00
13.80
14.00
13.80
14.00
14.00
14.00
14.00
14.00
13.70
14.00
14.00
14.00
14.00
13.30
13.30
14.00
13.80
13.25
13.45
13.55
14.00
14.00
13.70
13.70
13.70
13.50
13.50
13.15
13.25
13.30
13.50
13.50
13.50
14.00
14.00
13.50
14.00
14.00
14.00
14.00
14.00
14.00
14.00
12.00
11.00
11.50
11.50
12.00
12.00
12.00
12.00
11.50
12.00
11.50
12.00
12.00
12.00
12.00
11.50
11.50
12.00
12.00
12.00
12.00
11.25
11.25
11.50
11.70
11.25
11.40
11.40
11.50
11.50
11.50
11.50
11.50
11.50
11.50
11.20
11.20
11.25
11.00
11.00
11.00
11.50
12.00
11.50
11.50
12.00
12.00
11.50
11.50
12.00
11.50
1045
1025
1080
1005
985
980
990
YCJD30S41S3(H)
1035
990
1000
1030
995
995
HC36
1045
990
HC42
HC42
1000
1030
995
HC42
HC42
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
UC48C
1290
1300
1175
1250
1270
1260
1185
1185
1270
1280
1205
1240
1185
1300
1280
1205
1240
980
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*B12
T*9X*C16
T*9X*C20
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
T*9X*C20
T*9X*D20
T*(8,L)X*C16
T*(8,L)X*C20
UC48C
T*9X*C16
UC48C
YCJD36S41S3(H)
T*9X*C20
UC48C
T*9X*D20
UC48D
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
(Y*(8,L)C/T*8V)*C16
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
HC42
1210
1200
1205
1190
1240
1200
1210
1155
1195
1330
1240
1205
For Notes See Page 10.
8
Johnson Controls Unitary Products
561908-YTG-A-0410
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
COOLING
Net MBH
FURNACE
MODEL
COIL
MODELS
W
RATED
CFM
MODEL1
SEER
EER
TOTAL
SENS.
13 SEER HP WITH VARIABLE SPEED FURNACES2
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
T*(8,L)X*B12
HC42
HC42
21
21
21
21
21
21
21
24
17
21
21
17
21
21
21
21
21
21
24
21
21
21
21
24
21
21
21
21
21
21
21
21
24
21
21
21
21
21
21
21
21
24
21
21
21
21
24
21
21
21
1190
1240
1200
1210
1155
1195
1305
1240
1300
1475
1415
1270
1410
1400
1360
1475
1425
1420
1435
1400
1515
1425
1420
1435
1425
1450
1360
1395
1435
1410
1395
1430
1450
1425
1450
1360
1395
1435
1410
1395
1430
1450
1600
1660
1565
1615
1635
1605
1595
1575
35.6
35.4
35.6
34.6
34.8
34.6
35.0
34.8
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
41.5
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
41.5
41.5
41.5
41.5
41.5
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
25.6
25.2
25.4
24.8
24.8
24.8
25.6
25.0
29.0
29.9
29.5
29.0
29.6
29.6
29.5
30.1
29.3
29.3
29.7
29.4
30.0
29.2
29.4
29.4
30.0
30.4
29.6
29.6
30.1
30.1
30.3
30.3
29.9
30.0
30.0
30.0
30.0
30.2
30.2
30.2
30.0
30.2
34.4
34.4
34.8
34.4
34.8
34.6
34.8
34.6
14.00
13.50
14.00
13.50
14.00
13.50
13.30
13.80
13.50
13.50
13.50
13.50
13.30
13.50
13.80
14.00
13.50
13.50
13.50
13.50
13.50
13.30
13.20
13.40
13.50
13.50
13.30
13.50
13.80
14.00
13.50
13.50
13.80
13.50
13.50
13.40
13.50
13.50
13.50
13.30
13.20
13.40
13.30
13.20
13.10
13.20
13.20
13.30
13.30
13.30
12.00
11.50
11.50
11.50
11.50
11.50
11.00
11.50
11.50
11.50
11.50
11.50
11.00
11.00
11.50
11.50
11.50
11.50
11.50
11.00
11.00
11.00
11.00
11.00
11.50
11.50
11.00
11.00
11.50
11.50
11.50
11.50
11.50
11.50
11.50
11.00
11.00
11.00
11.50
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
HC42
UC48C
YCJD36S41S3(H)
UC48C
UC48C
UC48C
UC48D
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
UC48C
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*B12
T*9X*C16
T*9X*C20
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
T*9X*C20
T*9X*D20
T*(8,L)X*C16
T*(8,L)X*C20
UC48C
T*9X*C16
UC48C
T*9X*C20
UC48C
T*9X*D20
UC48D
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
T*(8,L)X*C16
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
HC42
YCJD42S41S3(H)
HC42
HC42
HC42
UC48C
UC48C
UC48C
UC48C
UC48D
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
FC/PC60C
FC/MC/PC60D
FC/PC60C
T*(8,L)X*C20
T*9X*C16
T*9X*C20
YCJD48S41S3(H)
T*9X*D20
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
For Notes See Page 10.
Johnson Controls Unitary Products
9
561908-YTG-A-0410
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
COOLING
Net MBH
FURNACE
MODEL
COIL
MODELS
W
RATED
CFM
MODEL1
SEER
EER
TOTAL
SENS.
13 SEER HP WITH VARIABLE SPEED FURNACES2
T*9X*C20
T*9X*D20
FC/PC60C
FC/MC/PC60D
FC/PC60C
FC/PC60C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/PC60C
FC/PC60C
FC/PC60C
FC/PC60C
FC/PC60C
FC/MC/PC60D
FC/PC60C
FC/PC60C
FC/MC/PC60D
FC/MC/PC60D
FC/MC62D
UC60C
21
24
21
21
21
21
21
21
24
24
21
21
21
21
21
21
21
21
24
21
21
21
21
21
21
24
21
21
24
21
21
24
21
21
24
21
21
24
1625
1490
1575
1625
1565
1640
1590
1655
1645
1615
1600
1625
1590
1655
1605
1690
1575
1560
1630
1645
1665
1640
1735
1575
1560
1630
1735
1645
1615
1615
1655
1630
1605
1655
1615
1605
1655
1615
47.0
47.5
47.0
47.0
49.0
49.5
48.0
48.0
48.0
48.0
48.5
48.5
48.0
48.0
56.5
57.0
56.0
56.0
56.5
56.5
57.0
56.0
56.5
56.0
56.0
56.0
56.5
56.0
55.5
56.5
56.0
56.0
55.5
55.0
53.5
54.0
53.5
53.5
34.6
33.8
33.8
33.8
35.0
36.2
34.6
34.8
35.2
35.0
35.0
35.0
35.2
35.2
37.8
37.8
37.8
37.8
37.8
37.8
37.8
37.2
38.5
37.2
37.2
37.2
38.5
37.2
36.8
37.4
37.2
37.4
37.0
36.8
35.8
35.2
35.0
35.0
13.40
13.20
13.10
13.10
13.10
13.65
13.10
13.20
13.20
13.20
13.20
13.30
13.10
13.10
13.50
13.50
13.30
13.30
13.30
13.30
13.50
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.30
13.50
13.20
13.30
13.50
13.30
13.00
13.00
13.00
13.00
11.00
11.00
11.00
11.00
11.00
11.95
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
10.90
11.00
10.80
10.90
T*9X*C16
T*9X*C20
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
(Y*9C/T*9V)*D20
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
T*(8,L)X*C16
YCJD48S41S3(H)
T*(8,L)X*C20
T*9X*C16
T*9X*C20
T*9X*D20
T*9X*C20
T*(8,L)X*C20
T*(8,L)X*C16
T*(8,L)X*C20
UC60D
T*9X*C16
FC/PC60C
FC/PC60C
UC60D
T*9X*C20
T*9X*D20
YCJD60S41S3
T*(8,L)X*C20
UC60D
T*9X*C20
UC60D
(Y*9C/T*9V)*D20
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
FC/MC/PC60D
FC/MC62D
FC/MC62D
FC/MC62D
FC/PC60C
FC/PC60C
HC60
UC60C
UC60C
UC60D
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. Variable speed furnaces have B.O.D (Blower on Delay) standard.
10
Johnson Controls Unitary Products
561908-YTG-A-0410
Thermostats - Compatible thermostat controls are available
through accessory sourcing. For optimum performance and
installation, refer to the UPGNET “Low Voltage Wiring Diagram”
document to select and apply controls.
ACCESSORIES
Refer to Price Manual for specific model numbers.
Off Cycle Timer Delay - Provides a 5-minute off cycle to pre-
vent rapid recycling of the compressor.
Hard Start Kit - Required when using TXV indoor coil. Also,
provides increased starting torque for areas with low voltage.
SOUND POWER RATINGS*
UNIT MODEL
(dBA)
75
18
24
30
36
42
48
60
Model
18
Source 1 Kit numbers
S1-2SA06708606
S1-2SA06721706
S1-2SA06705906
S1-2SA06708906
S1-2SA06708806
S1-2SA06708806
S1-2SA06707906
76
76
24
76
30
76
36
77
42
78
48
* Rated in accordance with ARI 270-95 Standards.
60
TYPICAL INSTALLATION
MINIMUM 18” SERVICE
ACCESS CLEARANCE
ON ONE SIDE
THERMOSTAT
60” OVERHEAD
CLEARANCE
WEATHERPROOF
DISCONNECT
SWITCH
NEC CLASS 1 WIRING
6” CLEARANCE
TO FURNACE OR
AIR HANDLER
AROUND PERIMETER
TERMINAL BLOCK
NEC CLASS 2 WIRING
TO INDOOR COIL
NOTE:
ALL OUTDOOR WIRING
CONTROL
ACCESS
PANEL
MUST BE WEATHERPROOF.
SEAL OPENING(S) WITH
PERMAGUM OR EQUIVALENT
TYPICAL FIELD WIRING
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES
POWER WIRING
CONTROL WIRING
FACTORY WIRING
POWER WIRING
208/230-1-60
24 VOLT CONTROL WIRING
MINIMUM 18 GA. WIRE
(NEC CLASS 2)
FURNACE OR AIR HANDLER TERMINAL BLOCK
Y R G W
C
*
TERMINAL W IS ONLY
REQUIRED ON SYSTEMS
WITH HEAT.
CONTACTOR
TERMINALS
GND.
LUG
*
COIL
R
Y
G
W
ROOM THERMOSTAT
CONDENSING UNIT
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.
Johnson Controls Unitary Products
11
561908-YTG-A-0410
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD18S41S3(H)
INDOOR COIL MODEL NO.
FC/MC/PC18
IDCFM
450
75
600
75
750
75
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
62
62
62
15.7 17.8 17.7 19.3 19.9 16.9 18.4 18.0 19.5 20.2 18.0 18.9 18.4 19.6 20.4
16.0 13.8 12.1 12.0 9.3 17.3 15.9 13.5 13.0 9.8 18.5 17.9 14.9 13.9 10.4
65
75
S.C.
KW
1.0
15.0 16.8 16.6 18.4 19.2 16.2 17.5 17.1 18.6 19.4 17.4 18.2 17.5 18.8 19.6
15.3 13.6 11.7 11.6 8.9 16.6 15.6 13.2 12.8 9.6 17.9 17.6 14.7 13.9 10.3
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1
14.2 15.8 15.6 17.4 18.5 15.5 16.6 16.1 17.7 18.6 16.8 17.4 16.7 18.1 18.8
14.5 13.4 11.2 11.2 8.6 15.9 15.3 12.8 12.6 9.4 17.2 17.2 14.4 13.9 10.1
1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
T.C.
S.C.
KW
T.C.
85
S.C.
KW
T.C.
13.5 14.8 14.6 16.4 17.7 14.8 15.7 15.2 17.5 17.9 16.1 16.6 15.8 17.3 18.0
13.8 13.1 10.8 10.7 8.2 15.2 15.0 12.5 12.4 9.1 16.6 16.9 14.2 14.0 10.0
95
S.C.
KW
1.3
12.6 13.7 13.2 15.1 16.5 13.8 14.6 13.8 15.5 16.7 15.0 15.5 14.4 16.0 16.8
12.8 12.5 10.2 10.3 7.9 14.1 14.1 11.8 11.9 8.8 15.4 15.7 13.4 13.6 9.8
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
11.6 12.6 11.8 13.8 15.4 12.7 13.5 12.5 14.2 15.5 13.8 14.5 13.1 14.6 15.6
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
T.C.
105
115
125
S.C.
KW
T.C.
S.C.
KW
11.9 11.9
1.6 1.6
9.6
1.6
9.8
1.6
7.6 13.1 13.2 11.2 11.6
1.6 1.6 1.6 1.6 1.6
8.6 14.3 14.6 12.7 13.3 9.6
1.6 1.6 1.6 1.6 1.6 1.6
T.C.
10.7 11.4 10.5 12.5 14.2 11.7 12.4 11.2 12.9 14.3 12.7 13.4 11.8 13.3 14.4
S.C.
KW
11.0 11.2
1.8 1.8
9.0
1.8
9.4
1.8
7.3 12.1 12.3 10.5 11.2
1.8 1.8 1.8 1.8 1.8
8.3 13.1 13.5 12.0 12.9 9.4
1.8 1.8 1.8 1.8 1.8 1.8
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
1.03
1.03
1.02
1.00
1.00
1.02
S.C.
1.00
1.00
1.00
1.07
1.05
1.03
1.00
1.00
1.03
KW
1.00
1.00
1.00
0.94
0.94
0.89
1.00
1.00
0.93
Furnaces
Coils
T.C.
1.01
1.03
1.03
1.03
1.03
1.03
1.03
1.01
1.02
1.02
1.03
1.02
1.03
S.C.
1.00
1.04
1.04
1.04
1.04
1.04
1.04
1.02
1.05
1.05
1.05
1.03
1.05
KW
0.89
0.91
0.91
0.94
0.94
0.94
0.91
0.89
0.89
0.90
0.91
0.89
0.89
HC18
T*(8,L)X*A12
T*(8,L)X*B12
T*9X*B12
FC/MC/PC18A
FC/MC/PC18B
FC/MC/PC18B
UC18A
–
UC18
AHP18
AHX18
AV*24
–
–
T*(8,L)X*A12
T*(8,L)X*B12
T*9X*B12
–
UC18B
MV12B
MA08B
F4FP024
F6FP018
FC/MC18B
UC18B
FC/MC18B
(Y*(8,L)C/T*8V)*A12 FC/MC/PC18A
(Y*(8,L)C/T*8V)*B12 FC/MC/PC18B
–
–
(Y*9C/T*9V)*B12
FC/MC/PC18B
(Y*(8,L)C/T*8V)*A12 HC18
(Y*(8,L)C/T*8V)*A12 UC18A
(Y*(8,L)C/T*8V)*B12 UC18B
(Y*9C/T*9V)*B12
UC18B
12
Johnson Controls Unitary Products
561908-YTG-A-0410
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD24S41S3(H)
INDOOR COIL MODEL NO.
FC/MC/PC36
IDCFM
600
75
800
75
1000
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
75
62
80
67
80
72
62
62
22.0 27.4 27.3 29.1 30.3 24.3 28.8 28.6 30.4 31.7 26.6 30.1 29.8 31.8 33.2
22.0 19.9 17.3 17.0 13.8 24.2 22.9 19.6 18.8 14.8 26.4 26.0 22.0 20.6 15.7
65
75
S.C.
KW
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
T.C.
20.5 25.3 25.1 27.4 29.3 23.0 26.9 26.6 28.9 30.7 25.5 28.4 28.0 30.4 32.2
20.5 19.3 16.4 16.5 13.4 22.8 22.1 18.8 18.4 14.4 25.1 24.9 21.3 20.3 15.5
S.C.
KW
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
T.C.
19.0 23.2 23.0 25.8 28.3 21.7 25.0 24.6 27.4 29.7 24.4 26.7 26.1 28.9 31.2
19.0 18.6 15.6 15.9 12.9 21.4 21.2 18.1 18.0 14.1 23.9 23.7 20.5 20.0 15.3
85
S.C.
KW
1.7
1.7
1.7
1.7
1.8
1.7
1.7
1.7
1.8
1.8
1.7
1.7
1.7
1.8
1.8
T.C.
17.5 21.1 20.8 23.8 27.2 20.4 23.1 22.5 24.0 28.7 23.3 25.0 24.3 27.5 30.1
17.5 18.0 14.7 15.4 12.4 20.0 20.3 17.3 16.8 13.7 22.6 22.6 19.8 19.7 15.1
95
S.C.
KW
1.8
1.8
1.8
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
2.0
T.C.
16.2 19.0 18.4 21.7 24.8 18.7 21.0 20.2 23.3 26.3 21.3 22.9 22.0 24.9 27.7
16.1 16.6 13.7 14.4 11.6 18.4 18.6 15.9 16.6 13.0 20.6 20.6 18.2 18.8 14.5
105
115
125
S.C.
KW
2.0
2.0
2.0
2.0
2.1
2.0
2.0
2.0
2.0
2.1
2.0
2.0
2.0
2.1
2.1
T.C.
14.8 17.0 16.1 19.3 22.5 17.1 18.9 17.9 20.8 23.9 19.4 20.9 19.7 22.3 25.4
14.8 15.3 12.7 13.5 10.8 16.8 17.0 14.6 15.7 12.4 18.7 18.7 16.5 17.8 13.9
S.C.
KW
2.1
2.1
2.1
2.1
2.2
2.1
2.1
2.1
2.2
2.2
2.2
2.2
2.1
2.2
2.3
T.C.
13.5 14.9 13.8 16.8 20.1 15.5 16.9 15.6 18.3 21.6 17.5 18.9 17.4 19.8 23.1
13.5 13.9 11.7 12.5 10.1 15.1 15.4 13.3 14.7 11.7 16.8 16.8 14.9 16.9 13.3
S.C.
KW
2.2
2.2
2.2
2.3
2.4
2.3
2.3
2.2
2.3
2.4
2.3
2.3
2.3
2.3
2.4
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
S.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.01
1.01
1.04
1.04
1.00
1.04
1.00
1.03
1.00
1.00
1.01
1.02
KW
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.92
0.92
0.91
0.91
1.00
0.91
1.00
0.91
1.00
1.00
0.93
0.92
Furnaces
Coils
T.C.
1.00
1.00
0.99
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.98
0.98
0.98
S.C.
1.01
1.02
0.98
1.02
1.00
1.00
1.00
1.00
1.01
1.02
1.02
1.01
1.01
1.02
1.01
1.01
1.01
1.01
1.00
1.01
1.00
1.00
1.02
0.99
0.99
0.99
KW
0.96
0.92
0.91
0.92
0.92
0.92
0.92
0.92
0.92
0.92
0.92
0.93
0.92
0.94
0.93
0.91
0.92
0.94
0.92
0.93
0.93
0.92
0.94
0.92
0.91
0.92
FC/MC/PC32
T*(8,L)X*A12
FC/MC/PC32A
FC/MC/PC35B
FC/MC/PC35C
FC/MC/PC35C
FC/MC/PC36A
FC/MC/PC36B
FC/MC/PC36B
FC/MC/PC36C
FC/MC/PC36C
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC32A
FC/MC/PC35B
FC/MC/PC35B
FC/MC/PC36A
FC/MC/PC36B
FC/MC/PC36B
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43B
HC30
–
FC/MC/PC35
T*(8,L)X*B12
–
FC/MC/PC37
T*9X*C16
–
FC/MC/PC43
T*9X*C20
–
HC30
T*(8,L)X*A12
–
HC36
T*(8,L)X*B12
–
HC42
T*9X*B12
–
UC36
T*9X*C16
AHP30
AHX30
AHX36
AV*36
MV12B
MA08B
MV12B
MA08B
MV12B
MA08B
F4FP36
F6FP030
F6FP036
–
T*9X*C20
–
T*(8,L)X*A12
–
T*(8,L)X*B12
–
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
FC/MC36B
FC/MC36B
FC/MC35B
FC/MC35B
FC/MC43B
FC/MC43B
–
–
–
HC36
HC36
UC36A
UC36B
UC36B
Johnson Controls Unitary Products
13
561908-YTG-A-0410
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD30S41S3(H)
INDOOR COIL MODEL NO.
FC/MC/PC35
IDCFM
800
75
1000
75
1200
75
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
62
62
62
28.4 31.4 30.8 33.1 34.4 29.8 31.8 31.4 33.4 34.5 31.2 32.3 32.1 33.7 34.7
28.8 25.8 21.7 21.2 16.0 30.4 28.2 23.6 22.6 17.1 31.9 30.7 25.4 24.0 18.1
65
75
S.C.
KW
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
T.C.
26.4 28.8 28.2 30.9 32.6 27.9 29.7 28.9 31.4 32.8 29.5 30.5 29.6 31.8 32.9
26.9 24.7 20.5 20.3 15.4 28.5 27.1 22.6 22.0 16.4 30.2 29.5 24.6 23.7 17.5
S.C.
KW
1.8
1.8
1.8
1.9
1.9
1.8
1.8
1.8
1.9
1.9
1.9
1.9
1.9
1.9
1.9
T.C.
24.4 26.3 25.6 28.8 30.9 26.0 27.5 26.4 29.3 31.0 27.7 28.7 27.1 29.8 31.2
24.9 23.6 19.4 19.4 14.7 26.6 26.0 21.6 21.4 15.8 28.4 28.4 23.9 23.4 16.8
85
S.C.
KW
2.0
2.0
2.0
2.0
2.1
2.0
2.0
2.0
2.0
2.1
2.0
2.0
2.0
2.1
2.1
T.C.
22.4 23.8 23.0 26.7 29.1 24.2 25.3 23.8 29.0 29.3 26.0 26.9 24.7 27.9 29.4
22.9 22.5 18.2 18.5 14.1 24.8 24.9 20.7 21.2 15.1 26.7 27.3 23.1 23.1 16.2
95
S.C.
KW
2.1
2.1
2.1
2.2
2.3
2.2
2.2
2.2
2.2
2.3
2.2
2.2
2.2
2.2
2.3
T.C.
20.5 21.8 20.4 23.7 26.3 22.0 23.1 21.3 24.3 26.4 23.6 24.5 22.1 24.8 26.4
21.0 20.7 17.1 17.4 13.2 22.6 22.7 19.1 19.7 14.3 24.3 24.7 21.0 22.0 15.4
105
115
125
S.C.
KW
2.3
2.3
2.3
2.4
2.4
2.4
2.4
2.3
2.4
2.5
2.4
2.4
2.3
2.4
2.5
T.C.
18.6 19.8 17.9 20.9 23.5 19.9 21.0 18.8 21.4 23.5 21.2 22.2 19.6 21.8 23.6
19.1 18.9 15.9 16.4 12.3 20.5 20.5 17.5 18.6 13.5 22.0 22.2 19.1 20.9 14.7
S.C.
KW
2.5
2.5
2.4
2.5
2.6
2.5
2.5
2.5
2.5
2.6
2.6
2.6
2.5
2.6
2.6
T.C.
16.8 17.9 15.4 18.1 20.7 17.8 18.9 16.2 18.5 20.7 18.9 19.9 17.1 18.8 20.7
17.3 17.2 14.8 15.3 11.4 18.4 18.4 16.0 17.6 12.6 19.6 19.6 17.1 19.8 13.9
S.C.
KW
2.7
2.7
2.6
2.7
2.8
2.7
2.7
2.6
2.7
2.8
2.7
2.7
2.7
2.7
2.8
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Furnaces
Coils
T.C.
1.03
1.03
0.97
1.02
1.03
1.03
0.97
1.01
1.02
1.02
1.02
1.03
1.02
1.02
1.03
1.03
1.03
1.03
1.03
1.03
1.03
1.02
1.02
1.03
1.03
1.03
1.03
S.C.
1.09
1.09
0.92
1.01
1.09
1.09
0.92
1.03
1.01
1.04
1.04
1.06
1.04
1.04
1.03
1.04
1.04
1.04
1.04
1.04
1.04
1.01
1.04
1.04
1.04
1.04
1.04
KW
0.99
0.95
0.89
0.94
0.99
0.95
0.89
0.99
0.95
0.97
0.93
0.94
0.94
0.93
0.97
0.95
0.97
0.93
0.92
0.95
0.93
0.95
0.97
0.93
0.92
0.95
0.93
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.01
1.03
1.03
1.01
1.02
1.00
1.01
1.02
1.00
1.00
1.01
1.01
S.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.06
1.06
1.04
1.02
1.02
1.00
1.02
1.02
1.00
1.00
1.03
1.02
KW
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.95
0.95
0.95
0.92
0.93
1.00
0.92
0.93
1.00
1.00
0.97
0.93
T*(8,L)X*A12
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC32A
FC/MC/PC35B
FC/MC/PC35B
FC/MC/PC35C
FC/MC/PC35C
FC/MC/PC35C
FC/MC/PC35C
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43C
HC36
FC/MC/PC35
T*(8,L)X*B12
–
FC/MC/PC37
T*(8,L)X*C16
–
FC/MC/PC43
T*(8,L)X*C20
–
HC36
T*9X*B12
–
HC42
T*9X*C16
AHP30
AHP36
AHX30
AHX36
AV*36
MV12B
MV16C
MA12B
MV12B
MV16C
MA12B
F4FP040
F6FP030
F6FP036
–
T*9X*C20
–
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*(8,L)C/T*8V)*A12
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*(8,L)C/T*8V)*B12
(Y*9C/T*9V)*B12
(Y*(8,L)C/T*8V)*C16
(Y*(8,L)C/T*8V)*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
–
–
–
FC/MC35B
FC/MC35C
FC/MC35B
FC/MC43B
FC/MC43C
FC/MC43B
–
–
–
Furnaces
Coils
T.C.
1.01
1.03
1.03
0.99
1.03
1.03
S.C.
1.02
1.09
1.09
0.98
1.09
1.07
KW
1.01
0.99
0.95
0.91
0.94
0.94
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*B12
FC/MC/PC32A
HC36
FC/MC/PC35B
FC/MC/PC35C
FC/MC/PC35C
FC/MC/PC35B
FC/MC/PC35C
HC42
HC42
HC42
HC42
T*9X*C16
14
Johnson Controls Unitary Products
561908-YTG-A-0410
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD36S41S3(H)
INDOOR COIL MODEL NO.
FC/MC/PC43
IDCFM
1000
75
1200
75
1400
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
75
62
80
67
80
72
62
62
34.7 36.1 35.2 37.4 37.3 33.8 35.5 34.8 37.0 37.5 32.9 34.9 34.4 36.6 37.6
34.3 33.0 27.6 25.5 18.4 33.3 31.0 26.2 24.6 18.0 32.3 29.1 24.7 23.6 17.7
65
75
S.C.
KW
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
1.9
2.0
1.9
2.0
2.0
T.C.
33.6 34.7 33.6 35.9 36.6 32.6 33.9 33.2 35.5 36.6 31.5 33.2 32.7 35.1 36.6
33.3 32.5 27.5 25.6 18.6 32.1 30.6 25.8 24.5 18.0 31.0 28.7 24.2 23.3 17.5
S.C.
KW
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.1
2.2
2.2
2.2
2.2
T.C.
32.4 33.2 32.0 34.4 35.8 31.3 32.3 31.5 34.1 35.7 30.2 31.5 31.0 33.7 35.5
32.2 32.0 27.3 25.8 18.8 30.9 30.2 25.5 24.3 18.0 29.6 28.3 23.7 22.9 17.3
85
S.C.
KW
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.3
2.4
2.4
2.4
2.4
T.C.
31.3 31.7 30.4 33.0 35.0 30.1 30.7 29.9 35.0 34.8 28.9 29.8 29.4 32.2 34.5
31.1 31.5 27.2 26.0 19.0 29.7 29.7 25.2 24.9 18.0 28.3 27.9 23.2 22.5 17.1
95
S.C.
KW
2.6
2.6
2.6
2.6
2.7
2.6
2.6
2.6
2.6
2.7
2.5
2.6
2.6
2.6
2.6
T.C.
27.9 28.8 27.2 29.8 32.5 27.0 27.8 26.6 29.4 32.2 26.0 26.9 25.9 29.0 31.9
28.7 28.9 25.0 25.0 18.4 27.3 27.2 23.2 23.2 17.3 25.8 25.6 21.5 21.4 16.2
105
115
125
S.C.
KW
2.8
2.8
2.8
2.8
2.9
2.8
2.8
2.8
2.8
2.9
2.7
2.8
2.7
2.8
2.9
T.C.
24.6 26.0 24.2 26.8 30.1 23.9 25.1 23.4 26.3 29.8 23.3 24.1 22.6 25.9 29.5
26.3 26.3 22.8 24.1 17.8 24.9 24.8 21.3 22.2 16.6 23.5 23.3 19.8 20.3 15.4
S.C.
KW
3.0
3.0
3.0
3.0
3.1
3.0
3.0
2.9
3.0
3.1
2.9
2.9
2.9
3.0
3.1
T.C.
21.3 23.2 21.1 23.7 27.6 20.9 22.3 20.2 23.2 27.3 20.5 21.3 19.3 22.7 27.0
23.9 23.8 20.6 23.2 17.2 22.5 22.4 19.4 21.2 15.9 21.1 21.0 18.2 19.2 14.6
S.C.
KW
3.2
3.2
3.2
3.2
3.4
3.2
3.2
3.1
3.2
3.3
3.1
3.1
3.1
3.2
3.3
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Furnaces
T*9X*C20
T*9X*D20
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
T*9X*C20
T*9X*D20
Coils
T.C.
1.01
1.01
0.98
0.99
0.99
0.97
0.97
0.97
1.01
1.01
1.02
1.02
1.01
1.02
1.03
1.03
1.03
1.03
1.03
1.02
1.02
1.01
1.02
0.99
0.99
0.99
1.00
0.99
S.C.
1.01
1.01
1.00
1.02
1.00
0.99
0.99
0.93
1.01
1.01
1.02
1.02
1.02
1.02
1.05
1.05
1.04
1.06
1.05
1.02
1.03
1.02
1.02
1.00
1.00
1.00
1.03
1.01
KW
0.97
0.97
0.93
0.95
0.97
0.95
0.95
0.94
0.98
0.98
0.94
0.93
0.97
0.95
0.94
0.93
0.95
0.97
0.94
0.94
0.93
0.97
0.95
0.93
0.92
0.94
0.97
0.94
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.01
1.01
1.01
1.01
1.00
1.01
1.01
1.00
1.01
1.00
1.02
S.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.01
1.02
1.01
1.02
1.00
1.02
1.03
1.00
1.02
1.00
1.04
KW
1.00
1.00
1.00
1.00
1.00
1.00
0.96
0.94
0.92
0.92
1.00
0.92
0.92
1.00
0.92
1.00
0.98
FC/MC/PC48C
FC/MC/PC48D
UC48C
FC/MC/PC43
–
FC/MC/PC48
–
HC42
UC48C
–
UC48
UC48C
AHP36
AHP42
AHX36
AHX42
AV*36
MV16C
MA12B
MV16C
MV20D
MA14D
MV12D
F5FP048
F6FP042
–
UC48C
–
UC48D
–
(Y*(8,L)C/T*8V)*A12 FC/MC/PC37A
(Y*(8,L)C/T*8V)*B12 FC/MC/PC43B
–
–
(Y*9C/T*9V)*B12
FC/MC/PC43B
FC/MC43C
FC/MC43B
FC/MC48C
FC/MC48D
FC/MC48D
FC/MC48D
–
(Y*(8,L)C/T*8V)*C16 FC/MC/PC43C
(Y*(8,L)C/T*8V)*C20 FC/MC/PC43C
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
FC/MC/PC43C
FC/MC/PC43C
(Y*(8,L)C/T*8V)*C16 FC/MC/PC48C
(Y*(8,L)C/T*8V)*C20 FC/MC/PC48C
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
–
Furnaces
Coils
T.C.
1.01
1.01
1.01
1.02
1.01
1.01
1.00
1.02
1.02
1.02
S.C.
1.02
1.02
1.00
1.03
1.02
1.02
0.99
1.02
1.04
1.04
KW
0.98
0.98
0.96
0.96
0.98
0.98
0.96
0.97
0.98
0.98
(Y*(8,L)C/T*8V)*C16 HC42
(Y*(8,L)C/T*8V)*C20 HC42
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*B12
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
HC42
HC42
(Y*(8,L)C/T*8V)*C16 UC48C
(Y*(8,L)C/T*8V)*C20 UC48C
T*9X*C16
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
UC48C
UC48C
UC48D
T*9X*C20
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
Johnson Controls Unitary Products
15
561908-YTG-A-0410
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD42S41S3(H)
INDOOR COIL MODEL NO.
FC/MC/PC43
IDCFM
1200
75
1400
75
1600
75
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
62
62
62
44.4 45.5 43.6 47.0 48.5 45.9 46.5 45.0 48.5 49.8 47.5 47.5 46.5 50.1 51.1
41.5 35.6 29.7 28.7 21.5 42.9 37.5 31.4 30.2 22.9 44.4 39.4 33.2 31.7 24.3
65
75
S.C.
KW
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.6
2.5
2.5
2.5
2.5
2.6
T.C.
42.3 42.9 41.2 45.1 46.6 44.2 44.3 42.7 46.6 47.9 46.0 45.7 44.2 48.1 49.1
39.4 35.2 29.2 28.5 21.3 41.1 37.4 31.1 30.1 22.4 42.9 39.7 33.0 31.8 23.6
S.C.
KW
2.7
2.7
2.7
2.8
2.8
2.7
2.7
2.7
2.8
2.8
2.8
2.8
2.8
2.8
2.9
T.C.
40.2 40.3 38.9 43.3 44.6 42.4 42.1 40.4 44.7 45.9 44.6 43.9 41.9 46.0 47.2
37.2 34.7 28.7 28.2 21.2 39.3 37.3 30.8 30.0 22.0 41.5 40.0 32.9 31.8 22.9
85
S.C.
KW
3.0
3.0
3.0
3.0
3.1
3.0
3.0
3.0
3.1
3.1
3.0
3.0
3.0
3.1
3.1
T.C.
38.2 37.7 36.5 41.5 42.7 40.7 39.9 38.0 42.0 44.0 43.2 42.1 39.6 43.9 45.3
35.0 34.3 28.1 28.0 21.0 37.5 37.3 30.5 29.4 21.6 40.0 40.3 32.8 31.9 22.2
95
S.C.
KW
3.2
3.2
3.2
3.3
3.4
3.3
3.3
3.3
3.3
3.4
3.3
3.3
3.3
3.4
3.4
T.C.
35.3 34.7 32.8 37.4 38.7 37.5 36.7 34.2 38.6 39.8 39.8 38.8 35.6 39.8 40.9
32.3 32.1 26.5 26.4 19.6 34.5 34.5 28.8 28.4 20.4 36.7 37.0 31.1 30.5 21.2
105
115
125
S.C.
KW
3.5
3.5
3.5
3.6
3.7
3.5
3.5
3.5
3.6
3.7
3.6
3.6
3.5
3.6
3.7
T.C.
32.4 31.7 29.2 33.4 34.8 34.5 33.6 30.5 34.6 35.7 36.5 35.5 31.8 35.7 36.7
29.7 30.0 25.0 24.9 18.2 31.6 31.9 27.2 27.0 19.3 33.5 33.8 29.4 29.1 20.3
S.C.
KW
3.7
3.7
3.7
3.8
4.0
3.8
3.8
3.7
3.8
4.0
3.8
3.8
3.7
3.9
4.0
T.C.
29.6 28.8 25.6 29.4 30.9 31.4 30.5 26.8 30.5 31.7 33.2 32.2 28.0 31.7 32.5
27.1 27.9 23.5 23.4 16.8 28.7 29.3 25.6 25.6 18.1 30.2 30.6 27.6 27.8 19.4
S.C.
KW
4.0
4.0
3.9
4.0
4.2
4.0
4.0
4.0
4.1
4.3
4.1
4.1
4.0
4.1
4.3
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Furnaces
T*9X*C20
T*9X*D20
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
T*9X*C20
T*9X*D20
Coils
T.C.
1.00
1.00
1.00
1.00
0.99
1.00
1.00
1.00
1.00
0.99
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.99
0.99
0.99
0.99
0.99
S.C.
1.00
1.02
1.01
1.03
1.00
1.01
1.01
1.01
1.02
0.99
1.00
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
KW
0.96
0.96
1.00
1.00
0.99
1.00
1.00
0.97
0.97
0.97
0.97
0.97
0.96
0.98
0.98
0.97
0.97
0.97
0.98
0.97
0.96
0.95
0.97
0.97
0.96
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
0.97
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.99
S.C.
1.00
1.00
1.00
1.00
1.02
1.02
1.00
1.02
1.02
1.00
1.00
1.00
1.03
1.01
KW
1.00
1.00
1.00
0.97
0.92
0.91
1.00
0.91
0.91
1.00
1.00
1.00
0.94
0.93
FC/MC/PC48C
FC/MC/PC48D
UC48C
FC/MC/PC48
–
HC42
–
UC48
UC48C
AHP42
AHX42
MV16C
MA16C
MV16C
MV20D
MA14D
MA16C
F5FP048
F6FP042
F6FP048
–
UC48C
–
UC48C
FC/MC43C
FC/MC43C
FC/MC48C
FC/MC48D
FC/MC48D
FC/MC48C
–
UC48D
(Y*(8,L)C/T*8V)*C16 FC/MC/PC43C
(Y*(8,L)C/T*8V)*C20 FC/MC/PC43C
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
FC/MC/PC43C
FC/MC/PC43C
(Y*(8,L)C/T*8V)*C16 FC/MC/PC48C
(Y*(8,L)C/T*8V)*C20 FC/MC/PC48C
–
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
–
Furnaces
Coils
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
S.C.
0.99
1.02
1.01
0.99
1.02
1.02
1.01
1.03
1.00
KW
0.96
0.96
0.96
0.96
1.00
1.00
0.96
0.96
0.96
(Y*(8,L)C/T*8V)*C16 HC42
(Y*(8,L)C/T*8V)*C20 HC42
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*B12
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
HC42
HC42
(Y*(8,L)C/T*8V)*C16 UC48C
(Y*(8,L)C/T*8V)*C20 UC48C
T*9X*C16
T*9X*C20
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
UC48C
UC48C
UC48D
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
16
Johnson Controls Unitary Products
561908-YTG-A-0410
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD48S41S3(H)
INDOOR COIL MODEL NO.
FC/MC/PC48
IDCFM
1400
75
1600
75
1800
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
75
62
80
67
80
72
62
62
49.7 51.4 50.6 55.8 54.6 52.0 53.1 51.9 56.4 55.4 54.4 54.7 53.2 56.9 56.3
47.2 43.1 35.9 36.0 26.1 49.2 45.9 38.2 37.4 27.6 51.2 48.7 40.4 38.8 29.0
65
75
S.C.
KW
2.7
2.8
2.8
2.8
2.8
2.7
2.8
2.8
2.8
2.8
2.7
2.8
2.8
2.8
2.9
T.C.
47.5 48.6 47.7 52.9 52.4 49.8 50.3 48.9 53.6 53.1 52.0 52.1 50.2 54.3 53.8
44.9 42.0 35.0 34.9 25.4 47.0 44.8 37.1 36.5 26.8 49.0 47.6 39.3 38.2 28.1
S.C.
KW
3.0
3.0
3.0
3.1
3.1
3.0
3.0
3.0
3.1
3.2
3.0
3.0
3.0
3.1
3.2
T.C.
45.4 45.8 44.8 49.9 50.2 47.5 47.6 46.0 50.8 50.8 49.7 49.4 47.1 51.7 51.4
42.7 41.0 34.0 33.8 24.8 44.7 43.7 36.1 35.7 26.0 46.8 46.5 38.2 37.6 27.2
85
S.C.
KW
3.2
3.3
3.3
3.4
3.4
3.3
3.3
3.3
3.4
3.5
3.3
3.3
3.3
3.4
3.5
T.C.
43.2 42.9 42.0 47.0 47.9 45.3 44.9 43.1 48.0 48.4 47.4 46.8 44.1 49.1 48.9
40.4 39.9 33.0 32.7 24.1 42.4 42.6 35.1 34.6 25.2 44.5 45.4 37.1 37.0 26.3
95
S.C.
KW
3.5
3.5
3.5
3.6
3.7
3.6
3.6
3.5
3.7
3.8
3.6
3.6
3.6
3.7
3.8
T.C.
39.8 39.4 37.3 42.4 43.6 41.6 41.1 38.4 43.4 44.0 43.5 42.9 39.5 44.4 44.5
37.1 37.0 30.9 30.9 22.9 38.9 39.3 32.9 33.0 23.9 40.8 41.5 34.9 35.1 25.0
105
115
125
S.C.
KW
3.8
3.8
3.8
3.9
4.0
3.9
3.9
3.8
3.9
4.1
3.9
3.9
3.8
4.0
4.1
T.C.
36.5 35.9 32.7 38.0 39.3 38.1 37.5 33.9 38.9 39.8 39.7 39.1 35.1 39.8 40.2
33.9 34.2 28.9 29.2 21.6 35.5 36.0 30.9 31.3 22.7 37.2 37.7 32.8 33.3 23.8
S.C.
KW
4.1
4.1
4.0
4.2
4.3
4.1
4.1
4.1
4.2
4.4
4.2
4.2
4.1
4.2
4.4
T.C.
33.1 32.4 28.1 33.5 35.1 34.5 33.8 29.4 34.4 35.5 35.9 35.3 30.6 35.2 36.0
30.7 31.4 26.9 27.5 20.4 32.1 32.7 28.8 29.6 21.5 33.5 34.0 30.7 31.6 22.5
S.C.
KW
4.4
4.4
4.3
4.4
4.6
4.4
4.4
4.3
4.5
4.7
4.5
4.5
4.4
4.5
4.7
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.98
0.98
S.C.
1.00
1.00
1.00
1.00
1.00
1.01
1.03
1.01
1.01
1.01
1.01
1.00
1.00
1.01
1.00
1.00
1.00
1.00
1.01
1.01
KW
1.00
1.00
1.00
1.00
1.00
1.00
0.96
0.91
0.91
0.91
0.91
1.00
1.00
0.91
1.00
1.00
1.00
1.00
0.95
0.95
Furnaces
Coils
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.98
0.99
0.98
0.98
1.00
1.01
1.00
1.00
1.00
1.00
0.99
0.99
1.00
1.00
S.C.
1.00
1.00
1.01
1.00
1.01
1.01
1.01
1.01
1.01
0.98
0.98
0.98
0.99
1.02
1.00
1.01
1.01
1.01
0.99
0.99
1.02
1.02
KW
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.98
0.99
0.98
0.98
1.06
0.98
0.99
0.99
0.99
0.98
1.05
1.05
0.99
0.99
FC/MC/PC60
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
FC/PC60C
–
HC60
–
UC48
–
UC60
T*9X*C20
AHP/SHP48
AHP/SHP60
AHX48
AV/SV*48
AV/SV*60
MV16C
MV20D
MA16C
MA20D
MV20D
MA16C
MA20D
F5FP048
F5FP060
F6FP048
F4FV060
–
T*9X*D20
–
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
–
FC/MC/PC60D
FC/PC60C
–
–
T*9X*C20
FC/PC60C
FC/MC48C
FC/MC48D
FC/MC48C
FC/MC48D
FC/MC60D
FC60C
FC/MC60D
–
T*9X*D20
FC/MC/PC60D
FC/PC60C
T*9X*C16
T*9X*C20
FC/PC60C
(Y*(8,L)C/T*8V)*C16 FC/MC/PC48C
(Y*(8,L)C/T*8V)*C20 FC/MC/PC48C
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
(Y*9C/T*9V)*D20
FC/MC/PC48C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
–
–
(Y*(8,L)C/T*8V)*C16 FC/PC60C
(Y*(8,L)C/T*8V)*C20 FC/PC60C
–
(Y*9C/T*9V)*C16
(Y*9C/T*9V)*C20
FC/PC60C
FC/PC60C
Johnson Controls Unitary Products
17
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD60S41S3
INDOOR COIL MODEL NO.
FC/MC/PC60
IDCFM
1600
75
1800
75
2000
75
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
62
62
62
55.8 63.8 62.1 65.2 71.9 60.3 65.7 62.8 66.7 69.8 64.8 67.5 63.5 68.2 67.8
54.7 51.6 41.4 41.1 34.1 58.4 54.2 43.9 42.6 31.9 62.1 56.8 46.5 44.2 29.6
65
75
S.C.
KW
3.0
3.0
3.0
3.1
3.1
3.0
3.0
3.0
3.1
3.1
3.0
3.1
3.0
3.1
3.1
T.C.
56.9 61.1 58.9 62.7 69.7 59.2 63.0 59.9 64.3 67.9 61.4 64.9 61.0 65.9 66.0
53.9 50.4 40.5 40.0 33.5 55.8 53.1 43.1 41.8 31.5 57.7 55.7 45.6 43.6 29.5
S.C.
KW
3.4
3.5
3.5
3.5
3.6
3.4
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
T.C.
58.0 58.4 55.7 60.3 67.6 58.0 60.4 57.1 61.9 65.9 58.1 62.4 58.5 63.6 64.1
53.2 49.3 39.7 39.0 32.9 53.3 52.0 42.2 41.0 31.2 53.4 54.7 44.8 42.9 29.4
85
S.C.
KW
3.9
3.9
3.9
3.9
4.0
3.9
3.9
3.9
3.9
4.0
3.9
3.9
3.9
3.9
4.0
T.C.
59.1 55.7 52.5 56.9 65.5 56.9 57.8 54.3 57.0 63.9 54.7 59.8 56.0 61.2 62.2
52.4 48.1 38.8 37.9 32.3 50.7 50.9 41.4 38.8 30.8 49.0 53.6 43.9 42.3 29.4
95
S.C.
KW
4.3
4.3
4.3
4.4
4.5
4.3
4.3
4.3
4.4
4.4
4.3
4.3
4.3
4.4
4.4
T.C.
56.4 52.2 48.8 54.0 60.1 54.0 54.3 50.5 55.7 59.7 51.6 56.3 52.2 57.4 59.4
49.7 45.9 37.5 36.5 29.7 47.9 48.3 40.0 38.7 29.4 46.2 50.6 42.5 40.9 29.0
105
115
125
S.C.
KW
4.9
4.9
4.9
4.9
5.0
4.9
4.9
4.9
5.0
5.0
4.9
4.9
4.9
5.0
5.0
T.C.
53.8 48.8 45.2 50.2 54.8 51.2 50.9 46.8 51.9 55.7 48.7 53.0 48.5 53.6 56.6
47.1 43.8 36.2 35.0 27.3 45.3 45.7 38.6 37.3 27.9 43.5 47.7 41.1 39.6 28.6
S.C.
KW
5.5
5.4
5.4
5.5
5.6
5.5
5.5
5.4
5.5
5.6
5.4
5.5
5.4
5.5
5.6
T.C.
51.2 45.4 41.6 46.5 49.4 48.5 47.5 43.2 48.2 51.6 45.7 49.7 44.8 49.8 53.8
44.5 41.7 34.9 33.6 24.9 42.6 43.2 37.3 35.9 26.5 40.7 44.7 39.7 38.3 28.2
S.C.
KW
6.1
6.0
5.9
6.1
6.2
6.0
6.0
6.0
6.1
6.2
6.0
6.0
6.0
6.1
6.2
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
S.C.
1.00
1.00
1.00
1.00
1.00
1.01
1.01
1.00
1.01
1.00
1.00
1.00
1.00
KW
1.00
1.00
1.00
1.00
0.98
1.00
1.00
1.00
1.00
1.00
1.00
0.96
0.99
Furnaces
Coils
T.C.
0.99
1.00
0.98
0.98
0.99
0.99
1.00
0.98
0.99
0.98
0.98
0.98
0.99
0.98
0.97
0.99
0.98
0.99
0.98
0.97
0.94
0.95
0.94
0.94
S.C.
0.98
0.98
0.98
0.98
0.98
0.98
0.98
0.97
1.00
0.97
0.97
0.97
1.00
0.97
0.95
0.97
0.96
0.96
0.96
0.95
0.93
0.91
0.90
0.90
KW
0.99
1.00
0.98
0.98
0.99
0.99
1.00
0.98
0.99
0.98
0.98
0.98
0.99
0.98
0.96
0.94
0.97
0.96
0.94
0.96
0.95
0.93
0.96
0.95
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
FC/PC60C
FC/MC/PC60D
FC/PC60C
FC/PC60C
FC/MC/PC60D
FC/MC/PC60D
FC/MC62D
UC60C
FC/MC62
–
HC60
–
UC60
T*9X*C20
AHP/SHP60
AHX60
AV/SV*60
MV20D
MA20D
MV20D
MA20D
F5FP060
F6FP060
F4FV060
–
T*9X*D20
–
T*9X*C20
–
T*(8,L)X*C20
T*(8,L)X*C16
T*(8,L)X*C20
T*9X*C16
FC/MC60D
FC/MC60D
UC60D
FC/MC62D
FC/PC60C
FC/PC60C
UC60D
FC/MC62D
T*9X*C20
–
–
–
T*9X*D20
T*(8,L)X*C20
T*9X*C20
UC60D
UC60D
(Y*9C/T*9V)*D20
FC/MC/PC60D
(Y*(8,L)C/T*8V)*C20 FC/MC62D
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
FC/MC62D
FC/MC62D
(Y*(8,L)C/T*8V)*C20 FC/PC60C
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
FC/PC60C
HC60
(Y*(8,L)C/T*8V)*C20 UC60C
(Y*9C/T*9V)*C20
(Y*9C/T*9V)*D20
UC60C
UC60D
Subject to change without notice. Published in U.S.A.
Copyright © 2010 by Johnson Controls, Inc. All rights reserved.
561908-YTG-A-0410
Supersedes: 364834-YTG-H-0509
Johnson Controls Unitary Products
5005 York Drive
Norman, OK 73069
|