1
retpahC
Installing Software from Diskette ............................................ 1-19
Printer Specifications ................................................................ 1-20
Printer Certifications ................................................................. 1-21
Language Codes ........................................................................ 1-24
1-1
DocuPrint P1202 User Guide
Introduction
Thank you for purchasing this laser printer.
The Xerox DocuPrint P1202 is a desktop laser printer specially designed for
the demanding small office and home office users. It uses a highly innovative
printing technology, which provides all the performance and power you need
for your business, small workgroup and personal printing.
In this guide you will find information essential for setting up and operating
your laser printer. So, do keep it handy should you experience any difficulties
with the printer.
1-3
DocuPrint P1202 User Guide
Printer Unpacking and Setup
Remove the printer and all accessories from the packing carton.
1
Save the carton and packing materials in case you need to repack the printer for
service or storage.
Make sure that your printer came packed with the following items:
2
•
•
•
•
•
Laser print cartridge
Power cord
User Guide (this book)
DocuPrint P1202 CD-ROM
This CD-ROM contains the software required to operate your printer,
along with useful printer utilities and a complete Reference Guide. Should
your computer not be equipped with a CD-ROM drive, please visit the
to “Making Installation Diskettes“ (page 1-18) for detailed instructions for
creating installation diskettes.
Additional items contained on the CD-ROM that are not accessed through the
main setup routine:
- Adobe Acrobat Reader located in the Acrobat directory.
- Documentation located in the Docs directory:
*
Reference Guide: XX_P1202R.pdf (where XX indicates the language code )
User Guide: XX_P1202R.pdf (where XX indicates the language code)
The printer box may also contain an IEEE 1284-compliant printer cable. Look at
the drawings labeled “Contents” on the top flap of the box. If a printer cable is not
pictured there, you will need to obtain a cable before installing the printer.
If any items are missing or damaged, notify your dealer immediately.
Carefully remove any shipping tapes from the printer.
3
4
Place the printer on a flat, stable surface near your workstation. Leave at least
6 inches (15 cm) behind and on each side of the printer, and at least 1 foot (30 cm)
in front of the printer, so that you can operate it properly and allow adequate air
circulation.
Do not place the printer:
•
•
In direct sunlight.
Near heat sources or air conditioners. Place the printer where the temperature
is stable and set for comfort.
•
•
In dusty or dirty environments. Dust accumulation may prevent the printer
from functioning properly.
Near devices that contain magnets or generate magnetic fields (such as
loudspeakers or base units of cordless telephones).
* Refer to table on last page for language codes.
1-4
DocuPrint P1202 User Guide
Printer Components
Front View
➊ Face down output stacker
➋ Paper support
➌ Multi-Purpose Tray (MP Tray)
➍Tray 1 (250 sheet)
➎ Tray 2 (250 sheet, optional)
➏ Control board cover
(provides access to SIMM slots for
adding/removing additional
memory)
➐ Control panel
➑ Paper level indicators
Inside Front View
➊ Top cover
➋ Laser print cartridge
➌ Serial number
➍Top cover release button
Rear View
➊ Rear cover (with face-up output
stacker inside)
➋ Printer cable connectors
➌ Power cord connector
➍Power switch
➎ Exhaust fan
➏ Cooling vent
1-5
DocuPrint P1202 User Guide
Laser Print Cartridge Installation
1
2
3
4
5
6
Pull sealing tape completely out of cartridge.
Do not expose cartridge to direct sunlight or
strong room light.
To avoid damaging photo-sensitive drum,
never open drum shutter.
To avoid damaging cartridge, complete
cartridge installation as quickly as possible.
1-6
DocuPrint P1202 User Guide
Paper Tray Adjustment
Length
1
Length
A4
Folio
Legal
1
2
2
Remove
guide
Remove
guide
from rear
slot and
place in
side slot
as shown.
from side
slot and
place in
rear slot
as shown.
3
3
For Legal and
Folio, lengthen
tray by sliding
out guide as
shown.
Width
Refer to the section “Paper
Loading“ (page 1-8) for
proper paper loading
procedure. After paper has
been loaded, readjust tray as
necessary.
1-7
DocuPrint P1202 User Guide
Paper Loading
Pinch side guide as shown below to adjust it to
proper paper width.
1
4
Do not remove tray while printing.
This may cause paper jams.
Press bottom plate until it locks into place.
2
Fan paper before loading.
Do not load above limit line as shown.
3
Insert paper under metal corner guide as shown.
5
Certain media must be manually fed one at a time through the
MP Tray. Refer to “MP Tray Printing“ (page 1-9).
1-8
DocuPrint P1202 User Guide
MP Tray Printing
The multi-purpose tray (MP Tray) is an auxiliary input device that you can use to feed media into the printer.
You can stack up to 100 sheets of paper for automatic loading, or manually feed items one at a time.
When you print on certain envelopes, heavier weight papers, transparencies, index cards, or
certain paper labels, you must manually feed them one at a time through the MP Tray. It is also
recommended that you use the face-up output stacker when printing on these media.
1
2
3
4
6
Open rear cover and pull out
paper support extensions.
Observe stack height limit.
Slide width guide against print
media.
Do not overload tray.
5
Load print media against left
edge of tray (see illustrations
below for proper letterhead and
envelope orientation).
7
Pull open MP Tray cover.
After printing, to return to using
standard face-down output
stacker, push in paper support
extensions and close rear cover.
Pull out feeder support.
Never use envelopes with
clasps, snaps, windows, coated
linings, or self-stick adhesives.
These envelopes may severely
damage the printer.
1-9
DocuPrint P1202 User Guide
Printer Driver Installation
Use the following instructions to install the PCL 6 and/or PCL 5e printer drivers on a Windows-based
PC. The printer driver enables you to control the DocuPrint P1202’s features and capabilities (see the
table on the next page). Use the driver’s on-line help for a complete description of its functionality. If
necessary, consult your Windows documentation for instructions on accessing the driver.
For other software installation procedures, including printer utilities, see the section “Software
Utilities Installation“ (page 1-13). For full details on the printer software, consult the Reference Guide
on the DocuPrint P1202 CD-ROM.
Before installing the software, verify the following:
•
•
•
Your PC has at least 16 MB of RAM installed.
There is at least 20 MB of free disk space on your PC.
ALL APPLICATIONS ARE CLOSED ON YOUR PC BEFORE BEGINNING INSTALLATION.
(A system reboot may be required after the software is installed.)
Windows 95/98/NT 4.0
Windows 3.1x
Insert the Xerox DocuPrint P1202 CD-ROM into
your CD-ROM drive.
Turn on the printer, then turn on the computer
and start Windows.
1
1
2
3
4
•
If Windows automatically runs the CD-ROM,
skip to Step 4.
Insert the Xerox DocuPrint P1202 CD-ROM into
your CD-ROM drive.
Select Run from the Start menu.
2
3
Open the Program Manager and select Run from
the File menu.
Type d:\setup.exe on the command line (where
“d” is your CD-ROM drive letter), then click OK.
Type d:\setup16.exe on the command line
(where “d” is your CD-ROM drive letter), then
click OK.
Select the appropriate language.
4
5
Select Printer Driver and follow the on-screen
instructions to complete the installation.
Select the appropriate language.
5
6
For Windows 95/98, please reboot once you have
completed installation.
Select Printer Driver and follow the on-screen
instructions to complete the installation.
The manufacturer recommends the minimal
installation of the PCL 6 driver, which
contains all the features described in the
product description. Advanced features
include Manual Duplex, Multiple Images,
Watermarks, and Booklet Printing.
1-11
DocuPrint P1202 User Guide
Printer Driver Features
Setting
Usage/Description
Select 1-99 copies.
PCL 6 PCL 5e
PS1
Number of copies
Page orientation
Paper size
*
*
*
*
*
*
*
*
*
Select Portrait or Landscape.
Select from supported paper sizes
(see “Printer Specifications”).
Paper source
Select printing from Tray 1, MP Tray or Tray 2
(if installed).
*
*
*
*
*
*
Graphic quality
Select enhancement for graphical and/or text
printing.
2
Graphic mode
TrueType fonts
EconoMode
Select vector or raster mode.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
2
2
2
Select font printing.
Select draft mode printing capability.
Include overlays in printed documents.
Print two-sided documents.
Overlays
Manual duplex
Multiple images (N-Up)
Watermarks
Select 1-9 images per physical page.
Create and use watermarks on documents.
Create booklets from documents.
Booklet printing
PostScript
1
2
This setting is not available in the Windows NT 4.0 version of the PCL 5e driver.
1-12
DocuPrint P1202 User Guide
Software Utilities Installation
For full details on the printer software, consult the Reference Guide on the DocuPrint P1202 CD-ROM.
Installing the USB Port Driver
(Windows 98)
Installing the RCP and SM
(Windows)
The USB port driver must be installed in order
to print to the DocuPrint P1202 via a USB
connection. Currently, USB printing is only
available through Windows 98.
The RCP (Remote Control Panel) and the SM
(Status Monitor) software are Windows-based
programs that allow the user to set default
printer values as well as monitor the status of
the printer.
Insert the Xerox DocuPrint P1202 CD-ROM into
1
your CD-ROM drive. If Windows automatically
These two utilities can only be used when the
printer is connected via the parallel interface.
runs the CD-ROM, skip to Step 3.
Select Run from the Start menu. Type
d:\setup.exe on the command line (where “d” is
your CD-ROM drive letter), then click OK.
2
Insert the Xerox DocuPrint P1202 CD-ROM into
your CD-ROM drive. If Windows automatically
runs the CD-ROM, skip to Step 3.
1
2
Select the appropriate language, then select USB
Port Driver.
3
For Windows 95/98/NT 4.0:
Select Run from the Start menu. Type
d:\setup.exe on the command line (where “d” is
your CD-ROM drive letter), then click OK.
Installing the Xerox Font Manager
(Windows)
For Windows 3.1x:
The Xerox Font Manager is a Windows-based
utility that allows you to install, load and
manage fonts on the DocuPrint P1202.
Open the Program Manager and select Run from
the File menu. Type d:\setup16.exe on the
command line (where “d” is your CD-ROM drive
letter), then click OK.
Insert the Xerox DocuPrint P1202 CD-ROM into
your CD-ROM drive. If Windows automatically
runs the CD-ROM, skip to Step 3.
1
Select the appropriate language.
3
4
For Windows 95/98/NT 4.0:
For Windows 3.1x, 95 and 98, select RCP and
SM. For Windows NT 4.0, select RCP.
2
Select Run from the Start menu. Type
d:\setup.exe on the command line (where “d” is
your CD-ROM drive letter), then click OK.
For Windows 3.1x:
Open the Program Manager and select Run from
the File menu. Type d:\setup16.exe on the
command line (where “d” is your CD-ROM drive
letter), then click OK.
Select the appropriate language, then select the
Xerox Font Manager.
3
1-13
DocuPrint P1202 User Guide
Control Panel
Indicator Light
ERROR
On
Off
Error during printing or No active errors.
standby.
MANUAL FEED
PAPER
Manual feed tray ready Manual feed tray is
and waiting.
inactive.
Out of paper.
Printer does not need
paper.
READY
On-line and ready.
Off-line and not ready.
Control Button
Control Button Operation
Toggle printer on-line/off-line.
Reset printer.
Control Button Function
Briefly press button.
Turn printer off-line (all lights off). Press and hold button for about
four seconds until all lights blink briefly, then let go of button.
Self test.
Turn printer on-line (READY light on). Press and hold button for about
four seconds until all lights blink briefly, then let go of button. The
configuration sheet will print.
Release unprinted data.
Adjust print quality.
If READY light is blinking slowly and printer does not print, press and
hold button for about four seconds.
Press and hold button for about ten seconds until all lights stay
illuminated, then let go of button. After cleaning printer, one cleaning
sheet will print.
1-14
DocuPrint P1202 User Guide
Control Panel Indicators
On-line
Out of paper
Receiving data (slow blinking)
or
Paper jam
Printing (rapid blinking)
Legend
Off
Off-line
On
Blinking
Error:
• Printer cover open
Manual feed mode
or
• Laser print cartridge not installed
Printing with manual feed
Insufficient memory for the job
Waiting for paper to be manually fed
System error
1-15
DocuPrint P1202 User Guide
Clearing Paper Jams
From Input Area
From Output Area
From Inside Printer
(Tray 1 or Tray 2)
1
1
1
Open top cover.
Gently pull paper to remove.
Printing will resume (if not, see
Troubleshooting in on-line
Reference Guide).
Open paper tray.
2
2
Remove laser print cartridge.
Gently remove jammed paper.
From Face-Up Tray
1
Open rear cover.
Make sure remaining paper in
tray is positioned correctly
(refer to “Loading Paper.”
3
Gently remove jammed paper.
3
Close tray. Printing will resume
(if not, see Troubleshooting in
on-line Reference Guide).
2
Gently remove jammed paper.
4
5
Replace laser print cartridge.
Close top cover. Printing will
resume (if not, see
Troubleshooting in on-line
Reference Guide).
Close rear cover.
Printing will resume (if not, see
Troubleshooting in on-line
Reference Guide).
1-16
DocuPrint P1202 User Guide
Installing Memory
1
2
3
4
5
6
7
Turn off power and disconnect
the power cable.
Install memory SIMM into
second slot labeled “DRAM” as
shown, slightly angled, notch
side up.
Replace control board cover.
8
Open control board cover.
Push back on the SIMM until it
clicks into place.
Reconnect power cable and turn
on power.
Remove metal plate.
Print a configuration sheet (hold
down control button until all
lights blink, then release).
Confirm new memory value on
sheet.
Reinsert metal plate.
O
P
E
N
O
P
E
N
C
C
L
L
O
O
S
S
E
E
1-17
DocuPrint P1202 User Guide
Making Installation Diskettes
Use the following procedures to copy software installation files from the Xerox DocuPrint P1202
CD-ROM onto floppy diskettes for installation onto computers that do not have a CD-ROM drive or
Internet access. To install the software, see “Installing Software from Diskette“ (page 1-19).
PCL 6 Printer Driver
PCL 5e Printer Driver
Label a new or freshly formatted diskette
1
1
“DocuPrint P1202 PCL 6 Driver” and insert it
into the floppy drive.
“DocuPrint P1202 PCL 5e Driver” and insert it
into the floppy drive.
Windows 95/98 and 3.1x:
Copy d:\XX\pcldrv\pcl6\win9x3x\*.* a:\
Windows 95/98 and 3.1x:
Copy d:\XX\pcldrv\pcl5e\win9x3x\*.* a:\
2
2
1
1
language code , i.e. EN for English, and “a” is
is the language code , i.e. EN for English, and
the floppy drive letter).
“a” is the floppy drive letter).
Windows NT 4.0:
Windows NT 4.0:
Copy d:\XX\pcldrv\pcl6\winNT\*.* a:\
(where “d” is the CD-ROM drive letter, XX is the
language code , i.e. EN for English, and “a” is
Copy d:\XX\pcldrv\pcl5e\winNT\*.* a:\
(where “d” is the CD-ROM drive letter, XX is the
language code , i.e. EN for English, and “a” is
1
1
the floppy drive letter).
the floppy drive letter).
RCP/SM
Xerox Font Manager
Windows 95/98 and 3.1x:
Label a new or freshly formatted diskette
“DocuPrint P1202 RCP/SM” and insert it into
the floppy drive.
Label a new or freshly formatted diskette
1
1
“DocuPrint P1202 Xerox Font Manager” and
insert it into the floppy drive.
Copy d:\XX\font\*.* a:\ where “d” is the
CD-ROM drive letter, XX is the language code ,
i.e. EN for English, and “a” is the floppy drive
2
1
Windows NT 4.0:
Label a new or freshly formatted diskette
“DocuPrint P1202 RCP” and insert it into the
floppy drive.
letter).
USB Port Driver (Windows 98 only)
Copy d:\XX\rcp_sm\*.* a:\
2
where “d” is the CD-ROM drive letter, XX is the
Label a new or freshly formatted diskette
1
language code , i.e. EN for English, and “a” is
1
“DocuPrint P1202 USB Port Driver” and insert it
the floppy drive letter).
into the drive.
Copy d:\XX\usb\*.* a:\ where “d” is the
CD-ROM drive letter, XX is the language code ,
i.e. EN for English, and “a” is the floppy drive
2
1
letter).
1
Refer to the table on the last page for language codes.
1-18
DocuPrint P1202 User Guide
Installing Software from Diskette
PCL Printer Drivers
RCP and SM
The following instructions specify the PCL 6 driver. To install
the PCL 5e driver, substitute PCL 5e for PCL 6 in the
instructions.
Windows 95/98 and NT 4.0
1. Insert the diskette “DocuPrint P1202 RCP/SM.”
Note: RCP only for Windows NT 4.0.
2. From the Start menu, select Run.
3. Type a:\setup.exe. Click OK.
4. Follow on-screen instructions.
Windows 3.1x
1. Insert the diskette “DocuPrint P1202 RCP/SM.”
2. Open the Program Manager and select Run from the
File menu.
Windows 95/98
1. Insert the diskette “DocuPrint P1202 PCL 6 Driver.”
2. From the Start menu, select Settings➔Printers.
3. Double-click Add Printer. Click Next.
4. Select Local Printer. Click Next.
5. Click Have Disk.
6. In the field Copy manufacturer’s files from:, type A:\
then click OK.
3. Type a:\setup.exe. Press Enter.
7. Select Xerox DocuPrint P1202 PCL 6. Click Next.
8. Select the port (by default LPT1:). Click Next.
9. Xerox recommends that the PCL 6 driver be the default
driver. Click Next.
Xerox Font Manager
10. Click Finish.
Windows 95/98 and NT 4.0
1. Insert the diskette “DocuPrint P1202 Xerox Font
Manager.”
2. From the Start menu, select Run.
3. Type a:\install.exe. Click OK.
4. Follow on-screen instructions.
Windows 3.1x
1. Insert the diskette “DocuPrint P1202 Xerox Font
Manager.”
Windows NT 4.0
1. Insert the diskette “DocuPrint P1202 PCL 6 Driver.”
2. From the Start menu, select Settings➔Printers.
3. Double-click Add Printer.
4. Select My Computer. Click Next.
5. Select the port (by default LPT1:). Click Next.
6. Click Have Disk.
7. In the field Copy manufacturer’s files from:, type A:\
then click OK.
8. Select Xerox DocuPrint P1202 PCL 6. Click Next.
9. Xerox recommends that the PCL 6 driver be the default
driver. Click Next.
2. Open the Program Manager and select Run from the
File menu.
3. Type a:\install.exe. Press Enter.
10. Decide whether you want to share this printer or not.
Then click Next.
11. Click Finish.
USB Port Driver (Windows 98 only)
1. Insert the diskette “DocuPrint P1202 USB Port Driver.”
2. From the Start menu, select Run.
3. Type a:\setup.exe. Click OK.
Windows 3.1x
1. Insert the diskette “DocuPrint P1202 PCL 6 Driver.”
2. Open Main➔Control➔Printers.
3. Click Add.
4. Follow on-screen instructions.
4. In List of Printers: highlight Install Unlisted or
Updated Printer and click Install.
5. In the field Insert unlisted, updated, or
vendor-provided printer driver disk in:, type A:\ then
click OK.
6. Select Xerox DocuPrint P1202 PCL 6. Click OK.
7. Xerox recommends that the PCL 6 driver be the default
driver. Highlight the driver and click Set as Default
Printer.
8. Click Close.
1-19
DocuPrint P1202 User Guide
Printer Specifications
Item
Specification and Description
Print Speed
12PPM (A4/Letter)
Resolution
True 600 x 600 dpi; 1200 dpi with Image Enhancement
Face Down: 250 sheets; Face Up: 10 sheets
Paper Handing (output)
Feed Capacity
2
Tray 1: 250 sheets of paper (80 g/m / 20 lb.)
2
MP Tray: 100 sheets of paper (80 g/m / 20 lb.); 10 envelopes
2
Option Tray 2: 250 sheets of paper (80 g/m / 20 lb.)
Power Rating
AC100~120V/ 220~240V(±15%), 50/60Hz (±3%)
Stand by: Background noise; Operating: Less than 49dB
Laser Print Cartridge
Acoustic Noise
Toner Supply
o
o
Operating Environment
Weight
Temperature: 10~30 C / 50~90 F; Humidity: 20~80% RH
11Kg / 25 lb.
External Dimensions
Print Cartridge
360 (W) x 426 (D) x 220 (H) mm / 14.2 (W) x 16.8 (D) x 8.7 (H) in.
Life Span: 6,000 pages, 5% area coverage
Starter CRU Life Span: 3,000 pages, 5% area coverage
Emulation
Fonts
PCL 5e, PCL 6, optional PostScript Level 2
1 bitmap
45 scalable (35 Intellifont, 10 TrueType)
CPU
Motorola Power PC 603e (clock speed 100MHz)
RAM Memory
Standard 4 MB
Expandable to 36 MB:
72 pin, EDO, non-parity, 60ns; 4 MB, 8 MB, 16 MB or 32 MB
Interface
Bidirectional Parallel Standard
- Modes supported: Compatible, Nibble, Byte, ECP
USB Interface Standard
- USB 1.0 compliant
- 12Mbps 1 port
Serial/LocalTalk Interface Optional
Serial (RS-232C)
- 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115.2Kbps
- XON/XOFF, DTR/DST Protocol
- Robust XON for XON/XOFF
LocalTalk
- Macintosh Host Interface
230.4KBPS, SDLC, FMO Coding, RS-232C
Interface Switching
Interface Time Out
Automatic (Parallel, Serial/LocalTalk and USB)
5 min (max.)
1-20
DocuPrint P1202 User Guide
Printer Certifications
Laser Safety
The Xerox DocuPrint P1202 complies with laser product performance standards set by governmental,
national and international agencies as a Class 1 Laser Product. It does not emit hazardous radiation, as
the beam is totally enclosed during all phases of customer operation and maintenance.
The use of controls, adjustments, or procedure other than those specified in the documentation might
result in hazardous exposure to laser light.
The laser beam inside the printer is completely confined within the protective housings and external
covers. The radiation emitted cannot escape from the machine during any phase of user operation.
The Xerox DocuPrint P1202 contains laser danger labels. These labels are intended for use by Xerox
Service Representatives, and are placed on or near panels or shields that require special tools for
removal. Do not remove any of these panels. There are no operator serviceable areas inside these covers.
Laser Safety for the United States and Canada
The Xerox DocuPrint P1202 complies with safety standards, and is certified as a Class 1 Laser product
under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of 1968. The printer does not emit hazardous
laser radiation.
The use of controls, adjustments, or procedures other than those specified in the documentation might
result in hazardous exposure to laser light.
Since radiation emitted inside the printer is completely confined within the protective housings and
external covers, the laser beam cannot escape from the machine during any phase of user operation.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products of August 1, 1976. These regulations apply to laser products
marketed in the United States. The label on the machine indicates compliance with the CDRH regulations
and must be attached to laser products marketed in the United States.
The Xerox DocuPrint P1202 contains laser danger labels. These labels are intended for use by Xerox
Service Representatives, and are placed on or near panels or shields that require special tools for
removal. Do not remove any of these panels or shields. There are no operator serviceable areas inside
these covers.
Laser Safety for Finland and Sweden
Luokitus on on tehty standardin EN 60825 mukaisesti Klassningen är gjord I enlighet met standarden EN
60825.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
VAROITUS!
Laitteen käyttaminene muulla kuin tässä käyttöohjessa mainitulla tavalla saattaa alitstaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteiylle.
VARNING!
Om Apparaten används på annat sätt än I denna bruksanvisning specficeratas, kan användaren utsättas
för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
Laser Statement (Laserturvallisuus)
Never operate and service the printer with the protective cover removed from laser/scanner assembly.
The reflected beam, although invisible, can damage your eyes.
Class 1 laser product
Luokan 1 laserlaite
Klass 1 laswer apparat
Allonpituus 770-795 nm
Teho 0.40mw +/-0.04 mw
1-21
DocuPrint P1202 User Guide
Printer Certifications (continued)
Radio Frequency Emissions
United States and Canada
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not specifically approved by the Xerox Corporation may void
the authority granted by the FCC to operate this equipment.
Shielded cables must be used with this equipment to maintain compliance with FCC regulations.
In order to allow this equipment to operate in proximity to Industrial, Scientific and Medical (ISM)
equipment, the external radiation from ISM equipment may have to be limited or special mitigation
measures taken.
Europe
The CE marking applied to this product symbolises Xerox Europe Declaration of Conformity with the
following applicable Directives of the European Union as of the dates indicated.
January 1, 1995: Council Directive 73/23/EEC amended by Council Directive 93/68/EEC, approximation of
the laws of the member states related to low voltage equipment.
January 1, 1996: Council Directive 89/336/EEC, approximation of the laws of the member state related to
electromagnetic compatibility.
This equipment has been tested and found to comply with the limits for a Class B digital device. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
A full declaration, defining the relevant directives and referenced standards can be obtained from your
Xerox Europe representative or by contacting:
Xerox Europe Product Safety,
Xerox Europe Technical Centre,
PO Box 17,
Bessemer Road,
Welwyn Garden City,
Herts AL7 1HE, England
This system is certified manufactured and tested in compliance with strict safety and radio frequency
interference regulations. Any authorised alteration which includes the addition of new functions or the
connection of external devices may impact this certification. Please contact your local Xerox Europe
representative for a list of approval accessories.
In order to allow this equipment to operate in proximity to industrial, Scientific and medical (ISM)
equipment, the external radiation from the ISM equipment may have to be limited or special mitigation
measures taken.
1-22
DocuPrint P1202 User Guide
Printer Certifications (continued)
CE
Energy Star
DEMKO
SEMKO
GOST
NOM
FIMKO
C+UL+US
Environmental Choice
Polish B
NEMKO
Y2K
Compliant
1-23
Language Codes
Code
BG
CS
DA
DE
EL
Language
Bulgarian
Czech
Danish
German
Greek
EN
ES
ET
FI
English
Spanish
Estonian
Finnish
FR
HU
IT
French
Hungarian
Italian
LT
Lithuanian
Latvian
LV
NL
NO
PL
Dutch
Norwegian
Polish
PT
RO
RU
SH
SK
SL
SV
TR
ZH
Portuguese
Romanian
Russian
Croatian
Slovak
Slovenian
Swedish
Turkish
Chinese
1-24
|