XEROX 3030 ENGINEERING COPIER
PLAIN-PAPER PRODUCTIVITY
WHEN YOU NEED IT...
WHERE YOU NEED IT.
Point of need convenience
Compact and user friendly
Improve your productivity
•
•
•
The Xerox 3030 Engineering Copier
Roll-fed media loading is quick and easy. There's a manual
bypass for feeding cutsheet media. And our standard copy stacker
and optional document stacker enhance operator efficiency.
The Xerox 3030 Engineering Copier is a point-of-need plain-
paper copier that's compact, aesthetically pleasing and
environmentally friendly. The 3030 gives you walk-up
convenience, automatic operation and a clear, easy-to-use
graphic interface.
Remember, your productivity is directly related to the flow of
engineering information. With the 3030, drawing elements can
be updated via cut-and-tape editing methods to form new
concept drawings quickly, right in the drawing room. Drawings
can be restored to "like new" condition, with the added storage
and handling benefits of plain-paper media. The 3030 gives you
added control of copy quality in terms of contrast and density.
With a 3030 at your point of need, you can make sure the vital
flow of engineering information won't bog down.
Copy from original drawings, bluelines, sepias, CAD plots and
cut-and-tape composites onto bond, vellum or film - up to 15
copies from a single feed. Select automatic synchrocut or key in
specific cut length. Make size-for-size copies up to 36 inches
wide by any manageable length at a speed of four D-size copies
per minute.
|