PLATINUM MINI-SPLIT
UNIT SPECIFIC INSTALLATION GUIDE
The Coolest Thing In Wine Storage
TO BE USED WITH THE
SPLIT SYSTEM OWNERS MANUAL
Required Tools
• Drill
• Phillips Screwdriver • Ladder
• 5/32”Drill Bit
• 1/4”Socket Drill Bit
• 1/4”Wrench
• Tape Measure
• Brazing Torch
• Drywall Saw
• Level
• Pliers
• Pencil
PACKAGE CONTENTS
(1) Mini-Split Evaporator Unit
(1) 12 Foot Bottle Probe
(4) 2”#8 Hex Head Screws
(1) 10 FT. 3/8”Drain Line
(1) ¼”Sight Glass
(1) 10”Piece of Cork Tape
(1) Split System Owner’s Manual
(1) Unit Specific Installation Guide
(1) Evaporator Mounting Template
(1) Warranty Registration Card
(1) ¼”Filter Drier
EVAPORATOR PREPARATION
1. Remove the access panel.
2. Install bottle probe connector.
3. Install 3/8”drain line on drain pan.
4. Depending on your desired installation, remove the rear or bottom knockouts for the line set and drain line.
5. Using a 5/32”drill bit on a drill, from the outside of the unit
cut holes through the unit’s insulation for the line
set and drain line.
1
2
3
Page 1
|