®
Skuttle
Indoor Air Quality Products
High Efficiency Air Cleaner
Owner's Manual
WARNING: This product must be installed by a
qualified heating and air conditioning contractor.
Congratulations
... on your purchase of a Skuttle High Efficiency Air Cleaner – one of the finest residential air
filtration systems made.
Experience that Works for You
Skuttle has been manufacturing residential indoor air quality products since 1917, earning
widespread acclaim as an industry leader. Our longevity and dedication to our customers have
resulted in efficient, high-quality products which are easy to use and easy to maintain.
Maximum Enjoyment of Your Air Cleaner System
Please take a few minutes to read this manual. It will:
• familiarize you with the many features and benefits of your new Air Cleaner system;
• help you appreciate the need for minimal, regular maintenance to ensure extended
years of efficient operation.
If, at some point, you need parts or service to maintain the superior performance of your
Skuttle Air Cleaner, follow these procedures:
• Contact the heating and air-conditioning contractor who installed your unit. (Often, this
information can be found on a label attached to your Air Cleaner or heating system.)
• If no label is found, look in the printed or on-line Yellow Pages under “Heating & Air
Conditioning Contractors”.
• If these attempts to obtain parts or service are unsuccessful, contact:
Skuttle Indoor Air Quality Products
101 Margaret Street, Marietta, OH 45750
800-848-9786 or 740-373-9169 • 740-373-9565 (fax)
Principle of Operation
Unfiltered air enters through the return air duct of your home’s HVAC system, carrying dust,
pollen and other pollutants. The vast majority of these contaminants are filtered out as the air
passes through Skuttle’s highly-efficient Air Cleaner media. The deep-pleated design serves
two purposes: 1) it minimizes airflow resistance by providing an expanded area for accumu-
lation, and 2) it allows for a longer collection period than standard flat-media filters.
Model DB-25-20
Drill-Hole Dimensions (all models)
Installation
The Air Cleaner cabinet can be installed on ductwork using standard sheet metal screws up to
1" long.
• Remove the cover and pull the media element out by grasping it at the top and bottom.
• Install the cabinet in the cold air return duct, so that air flowing through the duct also will
flow through the Air Cleaner.
• Attach the ductwork; tape and seal all seams air tight.
• Reinstall the media element with the arrow pointing in the direction of the airflow;
reinstall the cover.
The Skuttle Air Filter replacement cartridge
is classified by Underwriters Laboratories, Inc.
as to Flammability only Class2 166NG3.
U
® L
Securing the Air Cleaner Cabinet
This photo indicates a possible placement
This drawing shows a Skuttle High-
Efficiency Air Cleaner cabinet. The
sectioning lines and arrows indicate the
cutaway portion of the cabinet,
photographed at right.
of sheet metal screws to secure the Air
Filter to the ductwork. (Screw placement
may vary, depending on the installation
technique used.) Circled screws are 1/2"
long to prevent interference with the filter
media cartridge; all others are 1" long, #8
sheet metal screws.
Special Considerations
Transitions
Transitions – when needed – should be constructed so that the angle of expansion is no more than 20° (4"
per foot, max.).
Turning Vanes
To reduce turbulence, turning vanes are recommended if the installation requires a 90° elbow, or if there is
an angled fitting directly beside the Air Cleaner.
Humidifiers
It is crucial to avoid the buildup of moisture in and around the Air Cleaner media during humidifier oper-
ation. Evaporative type humidifiers will not effect the media. Spray or steam units should be installed in
the air stream after the Air Cleaner. (If it is necessary to install a spray or steam humidifier that is inline
before the Air Cleaner, there must be 8 or more feet of ductwork between the humidifier and the Air
Cleaner.)
Maintenance
Replacement of the Air Cleaner's pleated media element (i.e., the filter itself) can be determined by peri-
odic visual inspection. The average lifespan of a media cartridge is 12 months, but actual times vary
depending upon system run times, and the amount and type of contaminants present. (You may want to
have your HVAC contractor replace the media during the annual or biannual inspection of your furnace.)
Limited Ten-Year Product Warranty
This limited ten-year warranty covers this Skuttle Air Cleaner’s cabinet
and cover assemblies – excluding the replaceable element contained within
and installation.
Skuttle Mfg. Co. warrants that this product is free from defects in material and workmanship under normal, non-
commercial use and service.
Skuttle will remedy any such defects if they appear within 120 months from the date of the original installation, as
evidenced by receipt of the warranty registration card, subject to the terms and conditions of this limited ten-year
warranty, stated below:
1. THIS LIMITED TEN-YEAR WARRANTY IS GUARANTEED BY SKUTTLE MFG. CO., 101 Margaret Street,
Marietta, Ohio 45750.
2. This warranty shall extend only to any noncommercial owner who has purchased this residential product
other than for purposes of resale.
3. The completion and return of the warranty registration card is a condition precedent to warranty coverage
and performance. Warranty is not valid unless this card is completed and mailed to the factory within fifteen
(15) days of equipment installation.
4. All components are covered by this limited warranty, except expendable items.
5. If within the warranty period, this product, or any component, requires service, it must be performed by a
competent heating and/or plumbing contractor (preferably the installing contractor). Skuttle will not pay ship-
ping charges or labor charges to remove or replace such defective parts or components. If the part or com-
ponent is found by inspection to contain such defective material and/or workmanship, it will be either repaired
or exchanged, free of charge, at Skuttle's option, and returned freight collect.
6. In order to obtain the benefits of this limited ten-year warranty, the owner must notify the dealer or distributor
in writing of any defects within thirty (30) days of the discovery. If after reasonable time, you have not
received a satisfactory response, notify in writing: Skuttle Mfg. Co., 101 Margaret Street, Marietta, Ohio
45750.
SKUTTLE WILL RECEIVE, FREIGHT PREPAID, ONLY REMOVABLE PARTS
OR COMPONENTS OF SUCH DEFECTIVE PRODUCTS.
7. This limited warranty does not apply to any part or component that is: damaged in transit or handling, or has
been subject to abuse, neglect or accident; has not been installed, operated and serviced according to
Skuttle's instructions; has been operated beyond the factory-rated capacity; or has been altered in any such
way that its performance is affected. There is no warranty due to neglect, alteration or ordinary wear and tear.
Skuttle's liability is limited to replacement of defective parts and components, and does not include the pay-
ment of the cost of labor charges to remove or replace such defective components or parts.
8. Skuttle will not be responsible for loss of use of any product: loss of time, inconvenience or any other indirect,
incidental or consequential damages with respect to person or property, whether as a result of breach of con-
tract, neglect or otherwise. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
EXCLUSION, SO THE PRECEDING SENTENCE MAY NOT APPLY TO YOU.
9. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE.
10. Any warranty work will be performed within a reasonable time – usually within one-hundred-twenty (120)
days after notice of defect and delivery to the Skuttle factory, subject to delays beyond the manufacturer's
control.
11. Any warranty by Skuttle of merchantability, fitness for use or any other warranty (expressed, implied or statu-
tory), representation or guarantee other than what is set forth herein, shall expire at the expiration date of this
limited warranty. SOME STATES DO NOT ALLOW LIMITATION OF HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE LIMITATION IN THE PRECEDING SENTENCE MAY NOT APPLY TO YOU.
12. Skuttle reserves the right to make changes in the design and material of its products without incurring any
obligation to incorporate such changes in the units completed on the effective date of such change.
SKUTTLE MFG. CO.
101 Margaret Street, Marietta, OH 45750 • (800) 848-9786 or (740) 373-9169
Skuttle Enhances Indoor Air Quality Three Ways To Make a Skuttle “Happy House”
In addition to air filtration, our three-tiered, integrated approach to home air quality includes humidification and
ventilation.
Humidification
Model 2001
High-Capacity Bypass Flow-Thru
Humidifier
Model 60-2
High-Capacity Steam Humidifier
Model 190
High-Capacity Drum Bypass Humidifier
Dry winter air makes your home drier than a desert! During the winter months, when cold, dry air enters your home and is
heated, it has an intensified capacity to hold water. Acting like a sponge, it absorbs moisture from wherever it can find it –
furniture, woodwork, plants, pets...even people! The result is a range of discomforts and potentially expensive problems,
including:
•
•
•
•
dry skin
•
•
•
•
sore throats
static electricity
stuffy noses
wilted plants
cracked furniture and woodwork
allergies and respiratory ailments
damaged artwork, musical instruments and antiques
To combat these conditions, thousands of homeowners are discovering the multiple benefits of Skuttle whole-house humidi-
fiers. Because needs vary, Skuttle makes 15 different models – enough to fit more floor plans, heating systems and water types
than any other manufacturer.
Ventilation
Today’s tightly constructed homes effectively retain con-
ditioned (heated or cooled) air, but seal out fresh, healthful
outdoor air. This condition contributes to what is known
as sick house syndrome – a home environment in which
family members frequently suffer from colds, flu, aller-
gies, asthma and other ailments. Occasionally, these ail-
ments are at a life-threatening level. Skuttle manufactures
two efficient systems to bring the outdoors indoors for a
healthier home atmosphere:
Model 216
Make-Up Air Control
Skuttle’s Self-Adjusting Make-Up Air Control uses
your HVAC system to disperse fresh, filtered, conditioned
outdoor air throughout your home, without using additional electricity. By creating a slight pres-
sure buildup, the Make-Up Air Control also prevents unwanted air infiltration around windows
and doors.
The Skuttle Make-Up Air Diffuser supplies supplementary, fresh combustion air to appliances
(furnaces, dryers, etc.) with inadequate combustion air sources.
Model D-28-6
Make-Up Air Diffuser
For more information, visit us online at www.skuttle.com, or contact us to request our Consumer Awareness Bulletin.
Skuttle Indoor Air Quality Products
800-848-9786 or 740-373-9169 • 740-373-9565 (fax)
|