MODEL
AR-M160
AR-M205
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL
Page
• BEFORE USING
THE MACHINE
8
• COPY FUNCTIONS
18
• CONVENIENT COPY
FUNCTIONS
32
• PRINTER/SCANNER
FUNCTIONS
38
42
52
• USER SETTINGS
• TROUBLESHOOTING
AR-M160
• ROUTINE MAINTENANCE 71
• PERIPHERAL DEVICES
AND SUPPLIES
74
77
• APPENDIX
AR-M205
➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
FOR YOUR RECORDS ...
To protect against loss or theft, record and retain for reference the
copier’s serial number located on the back of the unit.
Model Number
Serial Number
Date of Purchase
Place of Purchase
Authorized Sharp Copier
Service Department Number
➣ ➢ ➣ ➢ ➣ ➢ ➣ ➢ ➣ ➢
This operation manual is also used for the AR-M160 J / AR-M205 J.
CONTENTS
CAUTIONS................................................................................................................................................. 3
● CAUTIONS ON USING..................................................................................................................................... 3
● IMPORTANT POINTS WHEN SELECTING AN INSTALLATION SITE ........................................................... 3
● CAUTIONS ON HANDLING ............................................................................................................................. 4
● ENVIRONMENTAL INFORMATION................................................................................................................. 5
USING THE MANUAL ............................................................................................................................... 5
● ABOUT THE OPERATION MANUALS............................................................................................................. 5
● THE MEANING OF "R" IN ORIGINAL AND PAPER SIZE INDICATIONS ....................................................... 5
● CONVENTIONS USED IN THIS MANUAL....................................................................................................... 6
● SPF AND RSPF................................................................................................................................................ 6
● DIFFERENCES BETWEEN MODELS.............................................................................................................. 6
MAIN FEATURES...................................................................................................................................... 7
1
BEFORE USING THE MACHINE
3
CONVENIENT COPY FUNCTIONS
PART NAMES AND FUNCTIONS..................... 8
ROTATING THE IMAGE 90 DEGREES.......... 32
SORT COPY / GROUP COPY......................... 32
● OPERATION PANEL......................................10
POWER ON AND OFF..................................... 12
● POWER ON....................................................12
● POWER OFF ..................................................12
COPYING MULTIPLE ORIGINALS ONTO
A SINGLE SHEET OF PAPER........................ 34
CREATING MARGINS WHEN COPYING....... 36
LOADING PAPER............................................ 13
● PAPER............................................................13
● LOADING PAPER...........................................14
● CHANGING A TRAY’S PAPER SIZE
ERASING SHADOWS AROUND THE EDGES
OF A COPY...................................................... 37
SETTING ........................................................16
4
PRINTER/SCANNER FUNCTIONS
USING THE PRINTER MODE ......................... 39
2
COPY FUNCTIONS
● BASIC PROCEDURE FOR PRINTING.......... 39
USING THE SCANNER MODE ....................... 40
● SCANNING USING THE KEYS ON THE
NORMAL COPYING ........................................ 18
● MAKING A COPY DARKER OR LIGHTER ....21
● SELECTING THE TRAY.................................21
● SETTING THE NUMBER OF COPIES...........22
MACHINE ...................................................... 40
● SCANNING FROM YOUR COMPUTER........ 41
OPERATION IN COPY, PRINTER, AND
SCANNER MODES ......................................... 41
REDUCTION/ENLARGMENT/ZOOM.............. 22
● AUTOMATIC RATIO SELECTION .................22
● MANUAL RATIO SELECTION........................23
●
SELECTING THE VERTICAL AND HORIZONTAL
COPY RATIOS SEPARATELY............................24
TWO-SIDED COPYING USING THE BYPASS
TRAY................................................................ 26
AUTOMATIC TWO-SIDED COPYING............. 27
● IMAGE ROTATION IN DUPLEX
COPYING .......................................................29
DUAL PAGE COPYING................................... 30
INTERRUPTING A COPY RUN....................... 31
1
5
USER SETTINGS
8
PERIPHERAL DEVICES AND SUPPLIES
ADJUSTING THE AUTOMATIC EXPOSURE
LEVEL.............................................................. 42
PERIPHERAL DEVICES ................................. 74
● SINGLE PASS FEEDER / REVERSING
SINGLE PASS FEEDER................................ 75
● 250-SHEET PAPER FEED UNIT /
ENABLING TONER SAVE MODE................... 43
CUSTOMIZING SETTINGS ............................. 44
● USER PROGRAMS........................................44
● SELECTING A SETTING FOR A USER
2 X 250-SHEET PAPER FEED UNIT ............ 75
● DUAL FUNCTION BOARD............................ 76
STORAGE OF SUPPLIES............................... 76
PROGRAM .....................................................47
● PROPER STORAGE ..................................... 76
SETTINGS FOR AUDITING MODE................. 48
● AUDITING MODE...........................................48
● AUDITING MODE SETTINGS........................48
●
SELECTING AUDITING MODE SETTINGS ......49
9
APPENDIX
SPECIFICATIONS ........................................... 77
SOFTWARE LICENSE .................................... 80
6
TROUBLESHOOTING
TROUBLESHOOTING..................................... 52
● MACHINE/COPYING PROBLEMS.................53
● PRINTING AND SCANNING PROBLEMS .....56
MATERIAL SAFETY DATA SHEET................ 82
INDEX .............................................................. 90
INDICATORS AND DISPLAY MESSAGES .... 62
MISFEED REMOVAL....................................... 63
● MISFEED IN THE SPF/RSPF.........................63
● MISFEED IN THE BYPASS TRAY .................64
● MISFEED IN THE MACHINE..........................65
● MISFEED IN THE UPPER PAPER TRAY......68
● MISFEED IN THE LOWER PAPER TRAY)....69
REPLACING THE TONER CARTRIDGE ........ 70
7
ROUTINE MAINTENANCE
CHECKING THE TOTAL OUTPUT COUNT
AND TONER LEVEL........................................ 71
● CHECKING THE TOTAL OUTPUT COUNT...71
● CHECKING THE TONER LEVEL...................72
ROUTINE MAINTENANCE.............................. 72
● CLEANING THE DOCUMENT GLASS AND
SPF/RSPF/DOCUMENT COVER...................72
● CLEANING THE BYPASS TRAY PAPER
FEED ROLLER...............................................73
● CLEANING THE TRANSFER CHARGER......73
2
CAUTIONS
Follow the cautions below when using this machine.
CAUTIONS ON USING
Warning:
• The fusing area is hot. Exercise care in this area when removing misfed paper.
• Do not look directly at the light source. Doing so may damage your eyes.
Caution:
• Do not switch the machine rapidly on and off. After turning the machine off, wait 10 to 15 seconds before turning it
back on.
• Machine power must be turned off before installing any supplies.
• Place the machine on a firm, level surface.
• Do not install the machine in a humid or dusty location.
• When the machine is not used for a long time, for example, during prolonged holidays, turn the power switch off
and remove the power cord from the outlet.
• When moving the machine, be sure to turn the power switch off and remove the power cord from the outlet.
• Do not cover the machine with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat
dissipation, damaging the machine.
• Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous laser radiation exposure.
• The socket-outlet shall be installed near the machine and shall be easily accessible.
IMPORTANT POINTS WHEN SELECTING AN
INSTALLATION SITE
Improper installation may damage the machine. Please note the following during initial installation and whenever the
machine is moved.
If the machine is moved from a cool place to a warm place, condensation may form inside the machine. Operation
in this condition will cause poor copy quality and malfunctions. Leave the machine at room temperature for at least
2 hours before use.
Caution
Do not install your machine in areas that are:
• damp, humid, or very
• exposed to direct sunlight
dusty
• poorly
ventilated
• subject to extreme
temperature or humidity
changes, e.g., near an
air conditioner or
heater.
3
The machine should be installed near an accessible power outlet for easy connection and
disconnection.
Be sure to connect the power cord only to a power outlet that meets the specified voltage and
current requirements. Also make certain the outlet is properly grounded.
Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is
connected to the same outlet, the light may flicker.
Note
Be sure to allow the required space around the machine
for servicing and proper ventilation.
8" (20cm)
8"
(20cm)
8"
(20cm)
A small amount of ozone is produced within the machine during operation.
The emission level is insufficient to cause any health hazard.
Note:
The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m3) calculated as an 8 hr. time-
weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the
machine in a ventilated area.
CAUTIONS ON HANDLING
Be careful in handling the machine as follows to maintain the performance of this machine.
Do not drop the machine, subject it to shock or strike it against any object.
Store spare toner cartridges in a cool dry place without removing from the package before use.
• If they are exposed to direct sunlight or excessive heat, poor copies may result.
Do not touch the photoconductive drum (green portion).
• Scratches or smudges on the drum will cause dirty copies.
Safety precautions:
This Digital Copier is rated Class I and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This
means that the machine does not produce hazardous laser radiation. For your safety, observe the precautions
below.
• Do not remove the cabinet, operation panel or any other covers.
• The machine’s exterior covers contain several safety interlock switches. Do not bypass any safety interlock by
inserting wedges or other items into switch slots.
Trademark acknowledgements
• Microsoft® Windows® operating system is a trademark or copyright of Microsoft Corporation in the U.S.A. and
other countries.
®
®
®
®
®
®
•
Windows 95, Windows 98, Windows Me, Windows NT 4.0, Windows 2000, and Windows XP are trademarks
or copyrights of Microsoft Corporation in the U.S.A. and other countries.
• IBM and PC/AT are trademarks of International Business Machines Corporation.
®
•
Acrobat Reader Copyright© 1987- 2002 Adobe Systems Incorporated. All rights reserved. Adobe, the Adobe logo,
Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.
• All other trademarks and copyrights are the property of their respective owners.
4
ENVIRONMENTAL INFORMATION
As an ENERGY STAR® Partner, SHARP has determined that this product meets
the ENERGY STAR® guidelines for energy efficiency.
USB 2.0 compatible (dual function board)
When connecting the machine by USB 2.0 (Hi-Speed mode), be sure to read "System
requirements for USB 2.0 (Hi-Speed mode)" (p.38) to verify that your system and the machine
settings are configured appropriately.
USING THE MANUAL
This machine has been designed to provide convenient copying features in a minimum amount of office space and
with maximum operational ease. To get full use of all machine features, be sure to familiarize yourself with this
manual and the machine. For quick reference during machine use, keep this manual in a handy location.
ABOUT THE OPERATION MANUALS
The operation manuals for the machine are as follows:
Operation Manual (Digital Multifunctional System) (this manual)
This manual contains explanations of the product and procedures for using the machine as a copier.
Online Manual (on the accessory CD-ROM)
This manual explains the procedures for using the machine as a printer or a scanner.
Software Setup Guide (separate manual)
This manual contains instructions for installing the software that allows the machine to be used with your computer
and procedures for establishing initial printer settings.
THE MEANING OF "R" IN ORIGINAL AND PAPER SIZE
INDICATIONS
An "R" appearing at the end of an original or paper size (5-1/2" x 8-1/2"R, 8-1/2" x 11"R, etc.) indicates that the original
or paper is oriented horizontally as shown below.
<Horizontal (Landscape) orientation>
Sizes that can be placed only in the horizontal (Landscape) orientation (8-1/2" x 14", 11" x 17") do not contain the
"R" in their size indication.
5
CONVENTIONS USED IN THIS MANUAL
Warns the user that injury may result if the contents of the warning are not properly followed.
Warning
Caution
Note
Cautions the user that damage to the machine or one of its components may result if the contents
of the caution are not properly followed.
Notes provide information relevant to the machine regarding specifications, functions,
performance, operation and such, that may be useful to the user.
SPF AND RSPF
This operation manual refers to the Single Pass Feeder as the "SPF", and the Reversing Single Pass Feeder as the
"RSPF".
DIFFERENCES BETWEEN MODELS
This manual covers the following models.
Model
AR-M205
AR-M160
(With RSPF installed)
Appearance
The above illustration is used in
instances where a function and/
or the operation of the machine
is the same on both models.
Copy speed
20CPM
16CPM
Automatic two-sided
copying/printing
Available
Not available
• Platen cover (AR-VR5) [Option]
• Reverse Single Pass Feeder
(AR-RP6) [Option]
• Platen cover (AR-VR5) [Standard]
• Single Pass Feeder (AR-SP6)
[Option]
Platen cover/SPF/RSPF
Paper feed units
Two (250 x 2)
One (250 x 1)
6
MAIN FEATURES
High-speed laser copying
• First-copy time*1 at 300 dpi*2 is only 7.2 seconds.
• Copying speed is 20/16 copies per minute at 600 dpi, This is ideal for business use and provides a big boost to
workplace productivity.
1
*
First-Copy time may vary depending on the power-supply voltage, ambient temperature, and other operating conditions.
"dpi" ("dots per inch") are units that are used to measure resolution. Resolution indicates how much detail can be
reproduced in a printed or scanned image.
2
*
High-quality digital image
• High-quality copies are possible in normal mode at 300 dpi and in photo mode.
• In addition to automatic exposure adjustment, two original modes can be selected: "TEXT" for text-only originals,
and "PHOTO" for photographs. The exposure can be adjusted to five levels in each mode.
• The photo mode copying function allows clear copying of delicate halftone original images such as monochrome
photos and color photos.
Enhanced copying features
• Zoom copies can be made from 25% to 400% in 1% increments.
(When the SPF/RSPF is being used, the zoom copy ratio range is 50% to 200%.)
• Continuous copying of up to 999 copies is possible. (Can be changed to a maximum of 99 copies in the user
programs.)
• The user programs allow customized machine settings and management. Access to the machine can be
controlled by enabling audit mode.
• The optional dual function board can be installed to enable use of Rotation copy and other convenient functions.
A
A
A
A
Erase copy*
Margin shift*
2 IN 1 copy* 4 IN 1 copy*
Dual page copy
* When dual function board
is installed
Rotation copy*
XY-ZOOM copying
Scan once/Print many
• The machine is equipped with a memory buffer allowing the machine to scan an original once and make up to 999
copies of the scanned image. This improves workflow, reduces operating noise from the machine and reduces
wear and tear on the scanning mechanism, which provides for a higher reliability.
Laser printer function
• The accompanying printer driver can be installed to enable use of the machine as a printer. (See the
accompanying Software Setup Guide.)
Color scanner function
• The accompanying scanner driver can be installed and the machine connected to a computer using a USB cable
to enable use as a scanner. (See the accompanying Software Setup Guide.)
Environment and people friendly design
• Preheat and auto power shut-off modes are provided to reduce power consumption when the machine is not in
use.
• A universal design makes the machine easy to use, even for inexperienced users.
7
Chapter 1
BEFORE USING THE MACHINE
1
This chapter contains basic information that should be read before using the machine.
PART NAMES AND FUNCTIONS
1
17
6
5
1
15
16
2
3
3
9
4
7
10
14
8
Paper trays
11
12
13
1
2
8
9
Document feeder cover (when the SPF/RSPF is
installed) /document cover (when the document
cover is installed)
Open to make copies from the document glass.
(p.18)
Each tray holds 250 sheets of paper. (p.14)
Side cover
Open to remove paper misfeeds and perform
machine maintenance. (p.64, p.73)
Side cover handle
Pull to open the side cover. (p.64)
Bypass tray guides
Adjust to the width of the paper. (p.15)
Bypass tray
Paper including special paper (such as transparency
film) can be fed from the bypass tray. (p.15 p.26)
Bypass tray extension
Pull out when feeding large paper such as 8-1/2" x
14" and 11" x 17". (p.15)
Charger cleaner
Use to clean the transfer charger. (p.73)
USB 1.1 port
Document glass
Place an original that you wish to scan face down
here. (p.18)
Handles
Use to move the machine.
Power switch
Press to turn the machine power on and off. (p.12)
Operation panel
Contains operation keys and indicator lights. (p.10)
Paper output tray
Copies and prints are deposited to this tray.
Front cover
Open to remove paper misfeeds and perform
machine maintenance. (p.65, p.70)
10
11
12
3
4
5
6
7
,
13
14
15
Connect to your computer to use the printer and
scanner functions. (Software Setup Guide)
8
BEFORE USING THE MACHINE
18 19
20
22
23
21
1
24
28
29
26
27
25
16
17
25
Parallel port
Connect to your computer to use the printer
function. (Software Setup Guide)
USB 2.0 port (when the dual function board is
installed)
Connect to your computer to use the printer and
scanner functions. (Software Setup Guide)
Toner cartridge
Contains toner. (p.70)
Roller rotating knob
Turn to remove misfed paper. (p.65, p.66)
Fusing unit release levers
To remove a paper misfeed in the fusing unit, push
down on these levers and remove the paper.
(p.66)
26
27
18
Document feeder tray (when the SPF/RSPF is
installed)
Place the original(s) that you wish to scan face up
here. Holds up to 40 originals.
Original guides (when the SPF/RSPF is
installed)
The fusing unit is hot. Do not touch
Warning
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
19
20
21
22
Adjust to the size of the originals.
28
29
Photoconductive drum
Copy images are formed on the photoconductive
drum.
Fusing unit paper guide
Open to remove misfed paper.
Feeding roller cover (when the SPF/RSPF is
installed)
Open to remove misfed originals. (p.63)
Right side cover (when the SPF/RSPF is
installed)
Open to remove misfed originals. (p.63)
Exit area (when the SPF/RSPF is installed)
Originals exit the machine here after
copying/scanning.
The model name can be seen to the machines
front cover.
Note
23
24
Reversing tray (when the RSPF is installed)
Pull out to remove misfed originals. (p.64)
Toner cartridge lock release lever
To replace the toner cartridge, pull out the toner
cartridge while pushing on this lever.
9
BEFORE USING THE MACHINE
OPERATION PANEL
(
)
AR-M205 only
4
1
2
3
5
6
ON LINE
SCAN
ORIGINAL TO COPY
XY-
ZOOM
1
2
1
2
3
4
5
6
DUAL
PAGE
COPY
AR-M160
29
26
1
2
8
SCAN MENU key
Use to scan by means of the provided Button
Manager software. (p.41)
ORIGINAL DATA indicator (when the dual
function board is installed)
Blinks when the memory becomes full of scanned
original image data. (p.33, p.35)
SCAN key/indicator
9
2 IN 1 / 4 IN 1 key/indicators (when the dual
function board is installed)
Press to select the "2 IN 1" or "4 IN 1" mode. (p.34)
ERASE key/indicators (when the dual function
board is installed)
Press to switch the machine to scanner mode and
scan by means of the provided Button Manager
software.(p.40) The indicator blinks during scanning
and transmission of the scanned data.
10
3
ON LINE key/indicator
Press to toggle the machine between online and
off-line. The indicator lights up when the machine
is online, and goes off when the machine is
off-line. The indicator blinks while the machine is
receiving print data and while printing is paused.
(p.39)
Press to select the "EDGE ERASE", "CENTER
ERASE" or "EDGE + CENTER ERASE" mode. (p.37)
11
12
MARGIN SHIFT key/indicator (when the dual
function board is installed)
Shifts text or image on the copy to leave a binding
margin on the edge of the copy. (p.36)
4
ORIGINAL TO COPY key/indicators
(AR-M205 only)
Press to select one-sided and two-sided copy
modes. (p.28)
Two-sided copies from one-sided originals.
Two-sided copies from two-sided originals.
One-sided copies from two-sided originals.
DUAL PAGE COPY key/indicator
Use to make individual copies of the two pages of
an open book or other two-page original. (p.30)
XY-ZOOM key/indicator
Press to change the horizontal and vertical copy
ratios independently. (p.24)
SORT/GROUP key/indicators (when the dual
function board is installed)
Press to select the "SORT" or "GROUP" mode. (p.32)
AUTO/TEXT/PHOTO key/indicators
Use to select the exposure mode:
"AUTO", "TEXT", or "PHOTO". (p.21)
13
14
AUDIT CLEAR key
Closes an open account. (p.51)
AUTO PAPER SELECT indicator
Paper of the proper size will be automatically
selected depending on the original size and
selected copy ratio when this indicator is on. (p.19)
5
6
7
15
Alarm indicators
[
[
] Maintenance indicator (p.62)
] Toner cartridge replacement required
indicator (p.62)
[
] Developer replacement required indicator
(p.62)
[
[
] Paper required indicator (p.62)
] Misfeed indicator (p.62)
10
BEFORE USING THE MACHINE
7
8
9
10 11 12 13
14
15
16
18
19
20
21
17
AUDIT CLEAR
AUTO PAPER SELECT
POWER SAVE
25 400%
INTERRUPT
CLEAR
ZOOM
ORIGINAL DATA
SORT
GROUP
ORIGINAL
SIZE
PAPER
SIZE
2 IN 1
4 IN 1
200
141
129
121
%
AUTO
TEXT
PHOTO
11X17
8½
8½
8½
8½
X
X
X
X
14
11
5½
11
EDGE
CLEAR ALL
100%
ERASE
CENTER
95
77
MARGIN
SHIFT
EXTRA
1
64
1 3 5
50
%
START
ORIGINAL SIZE
ENTER
TRAY
AUTO
PRESET RATIO
SELECT IMAGE
READ-END
22
23
24 25 26 27
28 29
30
31
32
33
34
35 36
16
27
POWER SAVE indicator
TRAY SELECT key (
)
Lights up when the machine is in a power save mode.
(p.12)
Display
Shows the set number of copies, as well as the copy
ratio, user program function or setting code, or an
error code when an error occurs.
When the [SCAN] key is pressed to enter scanner
mode, the display shows the port used (U_1 for USB
1.1 or U_2 for USB 2.0). When Button Manager
software is used, the display shows a program
number. (p.22, p.40, p.47)
Use to manually select a paper tray. (p.21)
AUTO IMAGE key/indicator
Press for automatic copy ratio selection. (p.22)
Paper feed location/misfeed location indicators
The selected paper feed location is shown by a lit
indicator ( ). (p.21)
28
29
17
The general location of misfed paper is shown by a
blinking red indicator (
). (p.63)
30
PRESET RATIO selector keys (
/indicators
,
)
18
Copy ratio display key (
Hold down when the machine is not in use to
display the copy ratio in the display. (p.24)
ZOOM indicator
Lights up when a zoom ratio is set. (p.24)
)
Use to select preset reduction/enlargement copy
ratios. (p.23)
31
32
[
] key
19
20
Use to check the total number of pages scanned.
(p.71)
Numeric keys
Zoom keys (
,
)
Use to select the desired copy quantity or to make
user program entries. (p.22)
To display the total number of pages output by the
machine, hold the [0] key down. (p.71)
Use to select any reduction or enlargement copy ratio
from 25% to 400% in increments of 1%. (p.24)
INTERRUPT key ( ) /indicator
21
22
Interrupts a copy run. (p.31)
33
34
READ-END key (
)
Light and Dark keys (
,
) /indicators
Use to check the total number of copies made (p.71).
To begin printing copies after the original has been
scanned for two-sided copying or other copy jobs that
use the document glass. (p.28, p.33, p.34)
Use to adjust the TEXT or PHOTO exposure level.
(p.21)
ORIGINAL SIZE ENTER key/ORIGINAL SIZE
indicators
Use to enter the original size. (p.16) The selected
original size will light up.
PAPER SIZE indicators
Light up to show the selected copy paper size. (p.16)
PAPER SIZE ENTER key
Use to set the paper size in the paper trays. (p.16)
SPR/RSPF indicator (when the SPF/RSPF is
installed)
23
START key (
) /indicator
Press to make a copy (p.18). Also press to exit
"Auto power shut-off" mode and to set a user
program. Copying is possible when the indicator is
on.
24
25
26
35
36
CLEAR ALL key (
)
Clears all selected settings and returns the
machine to the initial settings. (p.12)
CLEAR key (
)
Clears the copy quantity display or terminates a
copy run.
Lights up when originals are set in the document
feeder tray. (p.19)
11
POWER ON AND OFF
The power switch is located on the left side of the machine.
POWER ON
Turn the power switch to the "ON"
position
POWER OFF
Make sure that the machine is not in
operation and then turn the power switch
to the "OFF" position.
It will take about 45
seconds for the machine
to warm up. While the
machine is warming up,
the POWER SAVE
indicator will blink. (The
POWER SAVE indicator
will go off when the
If the power switch is
turned off while the
machine is in operation,
a misfeed may occur and
the job that was in
progress will be
canceled.
machine is ready to
copy.)
However, you can make desired settings and press
Check the following to make sure the machine is not in
operation:
• The START indicator is lit. (Initial state)
• The POWER SAVE indicator is lit. ("Preheat mode"
or "Auto power shut-off" mode)
the [START] key (
start after warm-up.
) during warm-up. Copying will
• "Auto clear" is initially set to return the copy settings to the initial settings when the [CLEAR ALL] key (
) is
Note
pressed, and after one minute elapses after a copy job is finished. When "Auto clear" operates, all previous
settings are cleared. The setting for "Auto clear" can be changed in the user programs. (p.44)
• The machine is initially set to automatically enter power save mode if not used for copying, printing, or scanning
for a preset period of time. This setting can be changed in the user programs. (p.44)
Power Save Modes
The machine has two power save modes to reduce overall power consumption thereby
reducing the cost of operation. In addition, these modes conserve natural resources and help
reduce environmental pollution. The two power save modes are "Preheat mode" and "Auto
power shut-off mode".
Preheat mode
This function automatically switches the machine to a low power consumption state if the set duration of time
elapses without the machine being used when the power is on. The POWER SAVE indicator lights up, however, the
keys on the operation panel can be used. Normal operation automatically resumes when a key on the operation
panel is pressed, an original is placed, a print job is received, or scanning is begun from a computer.
Auto power shut-off mode
This function automatically switches the machine to a state that consumes even less power than preheat mode if the
set duration of time elapses without the machine being used when the power is on. All lights except the POWER
SAVE indicator and ON LINE indicator go off. To resume normal operation, press the [START] key (
operation also resumes automatically when a print job is received or scanning is begun from a computer. While in
auto power shut-off mode, no keys (except the [START] key ( )) can be used.
). Normal
The preheat activation time and the "Auto power shut-off timer" can be changed using user programs. It is
suggested that you set times that are appropriate for your usage of the machine. (p.44)
Note
Initial settings
The machine assumes the initial settings when it is first turned on, when the [CLEAR ALL] key ( ) is pressed,
and approximately one minute after the last copy is made in any mode.
Copy ratio: 100%, Exposure: Automatic
Copy quantity: 0, All special copier modes: Off
Auto paper selection: On, Paper feed station: The tray selected in the "Default tray setting" in the user programs.(p.46)
12
LOADING PAPER
The paper required indicator (
) will light up when there is no copy paper in the selected paper feed station, or
when the selected paper tray is not installed or is improperly installed.
PAPER
For best results, use only SHARP recommended paper.
Paper tray type
Paper type
Size
Weight
Capacity
Paper tray
250-sheet paper Recycled paper
feed unit
2x250-sheet paper
feed unit
Standard paper
5-1/2" x 8-1/2" *1 (Invoice) 15 lbs. to 24 lbs.
8-1/2" x 11" (Letter)
8-1/2" x 14" (Legal)
11" x 17" (Ledger)
250 sheets
(56 g/m2 to 90 g/m2) (Load paper lower
than the line on the
tray)
1
Bypass tray
Standard paper
Recycled paper
5-1/2" x 8-1/2" (Invoice)
8-1/2" x 11" (Letter)
8-1/2" x 14" (Legal)
11" x 17" (Ledger)
15 lbs. to 20 lbs.
100 sheets *2
(56 g/m2 to 80 g/m2)
2
Thick paper
Max. 54 lbs. (200 g/m ) Load one sheet of
these papers at a
time to the bypass
tray.
Transparency film
Labels
Envelopes
Commercial 9
5 sheets
(3-7/8" x 8-7/8")
Commercial 10
(4-1/8" x 9-1/2")
International DL
(110 mm x 220 mm)
International C5
(162 mm x 229 mm)
1
* 5-1/2" x 8-1/2" can be used in the upper paper tray but cannot be used in other trays (including trays in optional paper feeding
unit).
2
* The number of sheets of the paper which can be set changes with the weight of a paper.
Special papers
Follow these guidelines when using special papers.
● Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended
paper may result in misfeeds or smudges on the output. If other than SHARP recommended media must
be used, feed each sheet one at a time using the bypass tray (do not attempt continuous copying or
printing).
● There are many varieties of special paper available on the market, and some cannot be used with this
machine. Before using special paper, contact a SHARP service center.
● Before using other than SHARP recommended paper, make a test copy to see if the paper is suitable.
13
BEFORE USING THE MACHINE
LOADING PAPER
Make sure that the machine is not copying or printing, and then follow these steps to load paper.
Loading the paper tray
Gently lift and pull out the paper tray
until it stops.
Gently push the paper tray into the
machine.
1
2
3
4
5
If you loaded a different size of paper than
Push the pressure plate down until it
locks in place.
Note
was loaded previously in the tray, go to
"CHANGING A TRAY’S PAPER SIZE
SETTING" (p.16).
Push the center of the
pressure plate down until
it locks into place.
Fan the paper.
If the paper is not fanned,
double-feeds or misfeeds
may occur.
Load paper into the tray.
• Do not load paper higher than the line on
the tray (up to 250 sheets).
Note
• Make sure that the paper fits under the tab
on the right side of the tray.
• Make sure the stack of paper is straight
before loading it. When adding paper, take
the remaining paper out and combine it into
a single stack with the new paper.
14
BEFORE USING THE MACHINE
Loading the bypass tray
Unfold the bypass tray.
Insert the paper (print face down) all
the way into the bypass tray.
1
3
To prevent a misfeed,
verify once more that the
paper guides are
adjusted to the width of
the paper.
1
If you loaded paper in the bypass tray, press
When feeding large
Note
the [TRAY SELECT] key ( ) to select the
bypass tray. The bypass tray will not be
selected automatically.
paper such as 8-1/2" x
14" and 11" x 17", pull
out the bypass tray
extension.
Set the paper guides to the copy
paper width.
2
Important points when inserting paper in the bypass tray
• Up to 100 sheets of standard copy paper can be set in the bypass tray.
• Be sure to place 5-1/2" x 8-1/2" size paper or envelopes horizontally as shown in the following diagram (
).
• When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction
flaps (not the closure flap).
• Special papers except SHARP recommended transparency film, labels, and envelopes must be fed one sheet at a
time through the bypass tray.
• When adding paper, first remove any paper remaining in the tray, combine it with the paper to be added and then
reload as a single stack. The paper to be added must be the same size and type as the paper already in the tray.
• Do not use paper that is smaller than the original. This may cause smudges or unclean images.
• Do not use paper that has already been printed on by a laser printer or plain paper fax machine. This may cause
smudges or unclean images.
15
BEFORE USING THE MACHINE
Envelopes
Do not use the following envelopes, as misfeeds will occur.
• Envelopes with metal tabs, clasps, strings, holes, or windows.
• Envelopes with rough fibers, carbon paper, or glossy surfaces.
• Envelopes with two or more flaps.
• Envelopes with tape, film, or paper attached to the flap.
• Envelopes with a fold in the flap.
• Envelopes with glue on the flap to be moistened for sealing.
• Envelopes with labels or stamps.
• Envelopes that are slightly inflated with air.
• Envelopes with glue protruding from the seal area.
• Envelopes with part of the seal area peeled off.
CHANGING A TRAY’S PAPER SIZE SETTING
Follow these steps to change a tray’s paper size setting.
• The paper size setting cannot be changed when the machine has stopped temporarily due to running out of
paper or a misfeed, or during interrupt copying.
Note
• During printing (even in copy mode), the paper size setting cannot be changed.
• 5-1/2" x 8-1/2" size paper can only be selected in upper paper tray.
• Do not load paper that is a different size than the paper size setting. Copying will not be possible.
Hold down the [PAPER SIZE ENTER]
key for more than 5 seconds to set the
selected paper size.
Use the [ORIGINAL SIZE ENTER] key
to select the paper size.
1
2
3
The indicator of the
selected paper size lights
up.
GINAL
PAPER
SIZE
The currently selected
11X17
GINAL
PAPER
SIZE
ORIGINAL SIZE 8½
X
X
X
X
14
11
5½
11
paper feed location
indicator will blink and the
corresponding paper size
(which is currently set)
indicator will light steadily.
All other indicators will go
out.
ENTER
8½
11X17
8½
8½
EXTRA
8½
8½
8½
8½
X
14
11
5½
11
X
X
X
EXTRA
Use the [TRAY SELECT] key ( ) to
select the paper tray for which you
wish to change the paper size setting.
Each time the [TRAY
SELECT] key ( ) is
pressed, a paper tray will
be indicated with a
blinking paper feed
location indicator.
TRAY
SELECT
16
BEFORE USING THE MACHINE
Important points when using the printer mode
• Make sure that the tray's paper size setting is the
same as the tray's paper size setting in the printer
driver. For example, if the tray's paper size setting is
8-1/2" x 11"R, set "Setting Paper Size" to "Letter-R".
For more information, see "CONFIGURING THE
PRINTER DRIVER" (p.11) in the "Software Setup
Guide".
Squeeze the lock lever of the front
guide and slide the front guide to
match the width of the paper, and
move the left guide to the appropriate
slot as marked on the tray.
4
Left guide
• If the dual function board is not installed, printing will
not take place correctly if the tray paper size setting
is 8-1/2" x 11"R. To prevent incorrect printing when
the tray paper size setting is 8-1/2" x 11"R, specify
the tray to be used and set the tray's paper size to
8-1/2" x 11"R in the printer driver.
Front guide
1
• The front guide is a slide-type guide. Grasp the
locking knob on the guide and slide the guide to the
indicator line of the paper to be loaded.
• The left guide is an insert-type guide. Remove it and
then insert it at the indicator line of the paper to be
loaded.
• When using 11" x 17" sized paper store the left guide
in the slot at the left front of the paper tray.
Press the [START] key ( ) and then
the [PAPER SIZE ENTER] key.
5
To change the paper size
setting of another tray,
repeat steps 2 to 5 after
pressing the [START]
START
key (
).
Affix the paper size label for the paper size
selected in step 3 to the label position on the
right end of the tray.
Note
17
Chapter 2
COPY FUNCTIONS
2
This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure
adjustment.
NORMAL COPYING
This section explains how to make a regular copy.
If "Auditing mode" has been enabled (p.51), enter your 3-digit account number.
Copying from the document glass
Open the document cover/SPF/RSPF,
and place the original.
Press the [ORIGINAL SIZE ENTER]
key and select the original size.
1
3
When the original size is
GINAL
PAPER
SIZE
selected, the tray with the
same size of paper is
automatically selected.
11X17
ORIGINAL SIZE 8½
X
X
X
X
14
11
5½
11
ENTER
8½
8½
8½
EXTRA
G Make sure that the PAPER SIZE indicator lights up.
Place the original face
down on the document
glass. Align it with the
original size scale.
G
If the indicator is not lit, no tray has the same size of
paper as the original. Load paper of the required size
in a tray, or select the bypass tray with the [TRAY
SELECT] key ( ) and copy from the bypass tray.
G The bypass tray must be manually selected.
G
To copy on paper of a different size than the original,
select the paper with the [TRAY SELECT] key ( ).
An original up to 11" x 17" can be placed on
the document glass.
Note
Set the number of copies.
4
Press the [START] key ( ) to begin
copying.
5
Close the document cover/SPF/RSPF.
2
The copy is delivered to
the paper output tray.
START
• The paper output tray can hold up to 250
sheets of paper.
Note
• About one minute after copying ends, "Auto
clear timer" activates and restores the copy
settings to the initial settings. (p.12) The
setting for "Auto clear time" can be changed
in the user programs. (p.44)
• Press the [CLEAR] key (
) to stop
copying in the middle of a run.
18
COPY FUNCTIONS
Copying from the SPF/RSPF
Make sure that an original has not
been left on the document glass.
Close the SPF/RSPF.
Press the [START] key ( ) to begin
copying.
1
5
The copy is delivered to
the paper output tray.
START
Adjust the original guides to the size
of the original(s).
2
• The paper output tray can hold up to 250
sheets of paper.
Note
• About one minute after copying ends, "Auto
clear timer" activates and restores the copy
settings to the initial settings. (p.12) The
setting for "Auto clear time" can be changed
in the user programs. (p.44)
2
Set the original(s) face up in the
document feeder tray.
3
• Press the [CLEAR] key (
) to stop
copying in the middle of a run.
• If you find it difficult to remove the original
from the document feeder tray, open the
feeding roller cover first and then remove
the original. If you remove the original
without opening the feeding roller cover, the
original may become dirty.
G Insert the original into the document feeder tray as
far as it will go. When the original is set, the
SPF/RSPF indicator will light up.
G The ORIGINAL SIZE indicator corresponding to the
size of the original lights up.
G Make sure that the ORIGINAL TO COPY indicators
are not lit. (When automatic two-sided copying is
supported.)
G Make sure that the PAPER SIZE indicator is lit.
G If the indicator is not lit, no tray has the same size of
paper as the original. Load paper of the required
size in a tray, or select the bypass tray with the
[TRAY SELECT] key ( ) and copy from the
bypass tray.
G The bypass tray must be manually selected.
G To copy on paper of a different size than the
original, select the paper with the [TRAY SELECT]
key ( ).
Do not place originals of different sizes
together in the document feeder tray. This
Note
may cause misfeeds.
Set the number of copies.
4
19
COPY FUNCTIONS
Auto paper select mode
When the AUTO PAPER SELECT indicator lights up, "Auto paper select mode" is enable. This function
automatically selects the paper that is the same size as the original (5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R,
"8-1/2" x 14" and 11" x 17" paper). "Auto paper select mode" can be disabled in the user programs. (p.44)
• If a zoom setting is selected after placing the original, the paper size that is appropriate for the zoom setting will
be automatically selected.
• "Auto paper select mode" is canceled if the auto zoom select function is enabled (p.22) or if a tray is selected
with the [TRAY SELECT] key ( ). Auto paper select resumes operation when the [CLEAR ALL] key (
pressed or when "Auto clear time" activates.
) is
Removing the document cover
Originals that can be used in the SPF/RSPF
To copy large originals like newspapers, remove the
document cover. To remove the cover, lift straight
up as shown. To replace the cover, do the reverse.
The SPF/RSPF cannot be removed.
Originals that are 5-1/2" x 8-1/2" to 11" x 17" and 15
lbs. to 24 lbs. (56 g/m2 to 90 g/m2) can be used. A
maximum of 40 pages can be placed at once.
• Make sure that there are no paper clips or
staples on the original.
Note
• Straighten curled originals before placing
them in the document feeder tray. Curled
originals may cause misfeeds.
• When using the margin shift function,
check the position of the margins
carefully. (p.36)
Originals that cannot be used in the
SPF/RSPF
The following originals cannot be used. These may
cause misfeeds or smudging and unclear images.
• Transparencies, tracing paper, other transparent or
translucent paper, and photographs.
• Carbon paper, thermal paper.
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
Copying books or originals with folds or
creases
Press down on the document cover/SPF/RSPF
while copying as shown. If the document
cover/SPF/RSPF is not completely closed, shadows
may appear on the copy or it may be fuzzy. Fan
originals with folds or creases well before placing.
• Originals printed using an ink ribbon (thermal
transfer printing), originals on thermal transfer
paper.
Stream feeding mode
If "Stream feeding mode" is enabled in the user
programs (p.44), the SPF/RSPF indicator will blink
for about 5 seconds after all originals are fed. If a
new original is placed in the SPF/RSPF during this
time, the original will automatically feed in and
copying will begin.
20
COPY FUNCTIONS
MAKING A COPY DARKER OR LIGHTER
Automatic exposure adjustment is initially enabled. This function automatically adjusts the copy image according to
the original being copied. If you wish to select the exposure level yourself, follow the steps below. (Select from two
original types and five exposure levels for each original type.) The exposure level used in automatic exposure
adjustment can also be changed. ("ADJUSTING THE AUTOMATIC EXPOSURE LEVEL" (p.42))
Original types
●
AUTO......Automatic exposure adjustment is enabled and the exposure is automatically adjusted according to the
original being copied. The exposure is lowered for colored areas and background shadows.
TEXT.......The exposure is raised for light areas and lowered for dark backgrounds to make text easier to read.
PHOTO...Halftones in the photo are reproduced with greater clarity.
●
●
Press the [AUTO/TEXT/PHOTO] key to
select the original type.
Press the [Light] key ( ) or [Dark]
key ( ) to adjust the exposure.
1
2
2
To adjust the exposure of
For a darker image,
a text original manually,
press until the TEXT
indicator lights. To copy a
photo, press until the
PHOTO indicator lights.
press the [Dark] key
). For a lighter image,
press the [Light] key
).
AUTO
TEXT
PHOTO
AUTO
1 3 5
TEXT
(
PHOTO
(
If exposure level 2 or 4 is
selected, the two
indicators will light
simultaneously.
To return to automatic adjustment, press until
the AUTO indicator lights.
Note
Exposure value guidelines
1 – 2 Dark originals like newspapers
Note
3
Normal originals
4 – 5 Colored text or text written in pencil
SELECTING THE TRAY
Auto paper select mode (p. 20) normally operates (unless it has been disabled), and thus when the original is placed
on the document glass and the original size is selected, or when the original is placed in the SPF/RSPF, the tray with
the same size of paper as the original is automatically selected. If you wish to use a tray other than the automatically
selected tray (for example you wish to enlarge or reduce the copy or use the bypass tray), press the [TRAY SELECT]
key ( ) to select the desired tray.
TRAY
SELECT
• If the desired PAPER SIZE indicator does not light up, change the paper in the tray to the desired paper size.
(p.16)
Note
• Automatic ratio selection (p.22) does not operate when the bypass tray or a tray set for a special paper size is
selected.
Auto tray switching
If the tray runs out of paper during copying and there is another tray with the same size of paper and the same
feeding orientation (horizontal or vertical), the other tray is automatically selected and copying continues. "Auto tray
switching" can be disabled in the user programs. (p.44)
21
COPY FUNCTIONS
SETTING THE NUMBER OF COPIES
Press the numeric keys to set the number of copies.
Important note when making a large number
of copies
The maximum number of copies can be changed in
the user programs. (p.44)
When the maximum number of pages that can be
held in the paper output tray (250) are output,
copying will temporarily stop. When this happens,
promptly remove the copies and press the [START]
key ( ) to resume copying. Copying will also stop
after 500 pages and 750 pages. Remove the pages
and resume copying in the same way.
● The set number of copies appears in the display. A
maximum of 999 copies (factory default setting)
can be set.
● If you wish to make only a single copy, copying is
possible with the display showing "0".
If you enter the wrong number, press the
Note
[CLEAR] key (
number.
) and enter the correct
REDUCTION/ENLARGMENT/ZOOM
The zoom function enables precise copy ratio selection from 25% to 400% in increments of 1%.
There are three ways to enlarge and reduce copies, as explained below.
• Reduction and enlargement ratios can be selected automatically with the [AUTO IMAGE] key.
"AUTOMATIC RATIO SELECTION" (p.22)
• Reduction and enlargement ratios can be selected manually with the [PRESET RATIO] selector keys
(
,
) and/or the [ZOOM] keys (
,
).
"MANUAL RATIO SELECTION" (p.23)
• Separate settings can be selected for the vertical and horizontal ratios.
"SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY" (p.24)
Ratios that can be selected will vary depending on whether the original is placed on the document glass or in the
SPF/RSPF.
Original position
Document glass
SPF/RSPF
Selectable ratios
25% – 400%
50% – 200%
AUTOMATIC RATIO SELECTION
Place the original(s) in the document
feeder tray or on the document glass.
Use the [TRAY SELECT] key ( ) to
select the paper tray with the desired
paper size.
1
2
3
If the original is placed on the
document glass, select the original
size. (p.18)
This feature will not work
when using copy paper
of non-standard size or
when using the bypass
tray.
TRAY
SELECT
Automatic ratio selection can be used when
Note
the original size is 5-1/2" x 8-1/2", 8-1/2" x
11", 8-1/2" x 11"R, "8-1/2" x 14" or 11" x 17". It
cannot be used for other sizes.
22
COPY FUNCTIONS
Press the [AUTO IMAGE] key.
Set the number of copies and other
copy settings, and then press the
[START] key ( ).
The copy will be delivered to the paper output
tray.
4
5
The AUTO IMAGE
indicator lights up and the
AUTO
appropriate ratio for the
original size and paper
size is selected. (The
indicator of the selected
ratio will light up.)
IMAGE
To cancel automatic ratio selection, press the
[AUTO IMAGE] key again.
Note
•
If the ORIGINAL SIZE indicator blinks,
change the orientation of the placed original.
Note
• If the copy is made when a PRESET
RATIO selector indicator is blinking, the
copied image may run off the page.
2
MANUAL RATIO SELECTION
Copies can be reduced down to 25% or enlarged up to 400%. The [PRESET RATIO] selector keys (
,
) can be
pressed to quickly select a ratio from among eight preset ratios. In addition, the [Zoom] keys (
pressed to select the ratio in increments of 1%.
,
) can be
Place the original in the document
feeder tray or on the document glass.
• To verify a zoom setting without changing
the zoom ratio, Hold down the [Copy ratio
display] key ( ). When the key is
released, the display will return to the
number of copies display.
• If the copy is made when a PRESET
RATIO selector indicator or the ZOOM
indicator is blinking, the copied image may
run off the page. To ensure that the image
fits on the page, lower the copy ratio until
the indicator stops blinking and lights
steadily.
1
2
3
Note
If the original is placed on the document
glass, select the original size. (p.18)
Use the [PRESET RATIO] selector
keys ( , ) and [Zoom] keys (
to select the desired copy ratio.
,
)
Selecting a preset ratio
Press the [PRESET
• If the PAPER SIZE indicator is not lit, there
is no appropriate paper. Load appropriate
paper in a paper tray (p. 14).
200
141
129
121
%
PRESET RATIO
RATIO] selector key (
to move up through the
preset ratios.
Press the [PRESET
RATIO] selector key (
to move down through
the preset ratios.
)
100%
95
77
Set the number of copies and other
copy settings, and then press the
[START] key ( ).
The copy will be delivered to the paper output
tray.
64
4
50
%
)
Fine adjustment of the
ratio
To return the ratio to 100%, press the
Any ratio from 25% to
400% can be set in
increments of 1%.
Note
[PRESET RATIO] selector key (
until the 100% indicator lights up.
or
)
25 400%
ZOOM
Press a [PRESET RATIO] selector key (
set the approximate ratio, then press the [Zoom] keys
or ) to increase or decrease the ratio.
To decrease or increase the zoom ratio rapidly, hold
or
) to
(
down the [Zoom] keys (
When a [Zoom] key (
or
).
or
) is pressed, the ZOOM
indicator will light up and the zoom ratio will appear in
the display for about two seconds.
23
COPY FUNCTIONS
SELECTING THE VERTICAL AND HORIZONTAL
COPY RATIOS SEPARATELY
(XY ZOOM copying)
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently.
Example: Reduction only in the horizontal direction.
Original
Copy
• This feature cannot be used with the 2 IN 1 or 4 IN 1 feature. (p.34)
• To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the DUAL PAGE COPY feature first and
then the XY ZOOM feature.
Note
• The XY ZOOM feature cannot be used in combination with the AUTO IMAGE function.
Ratios that can be selected will vary depending on the position of the original.
Original position
Document glass
SPF/RSPF
Selectable ratios
25% – 400%
50% – 200%
Place the original(s) in the document
feeder tray or on the document glass.
Use the [PRESET RATIO] selector
1
2
4
keys ( , ) and [Zoom] keys (
,
)
to change the copy ratio in the vertical
direction.
If the original is placed on the
document glass, select the original
size. (p.18)
Press the [PRESET
RATIO] selector keys
PRESET RATIO
25 400%
(
,
) to select a ratio
close to the desired ratio,
and then press the
Press the [XY-ZOOM] key.
3
[Zoom] keys (
,
) to
XY-ZOOM Indicator
adjust the ratio in
increments of 1%.
The ratio appears in the
display.
lights up.
XY-
The current value for the
vertical direction will
appear in the display.
ZOOM
Press the [Copy ratio display] key
5
(
).
The selected ratio for the
vertical direction will be
entered.
ZOOM
24
COPY FUNCTIONS
Use the [PRESET RATIO] selector
6
keys ( , ) and [Zoom] keys (
to change the copy ratio in the
horizontal direction.
,
)
Press the [PRESET RATIO] selector keys (
,
) to select a ratio close to the desired ratio, and
then press the [Zoom] keys (
the ratio in increments of 1%.
The ratio appears in the display.
,
) to adjust
Press the [Copy ratio display] key
7
8
(
).
The selected ratio for the horizontal direction will
be entered and the display will change to the
number of copies display.
2
Set the number of copies and other
copy settings, and then press the
[START] key ( ).
The copy will be delivered to the paper output
tray.
• To verify the copy ratios, press and hold
Note
down the [Copy ratio display] key (
).
The vertical and horizontal ratios will be
alternately displayed.
• If you need to change the ratios, press the
[PRESET RATIO] selector keys (
,
)
and the [Zoom] keys ( ) to reset the
,
ratios, beginning with the vertical ratio.
(step 4)
• To cancel XY ZOOM copy, press the
[XY-ZOOM] key. The XY-ZOOM indicator
will go off, indicating that the function is
canceled.
25
TWO-SIDED COPYING USING THE
BYPASS TRAY
To perform manual two-sided copying, follow these steps.
Example: Copying originals A and B onto each side of one sheet of paper
1
2
1
Copy
Original B
Original A
Copy original A.
Turn the copy of original A over, and
without changing the position of the
edge closest to you, insert it in the
bypass tray.
1
3
Insert the paper all the
way in.
1
1
Copied original A
1
2
1
Original A
Copied
original A
Original B
Copied original A
Original A
Copied
original A
Original B
Place original B as shown below.
2
Vertically-oriented
original:
If the original is oriented
vertically, place it in the
same orientation as
original A.
2
Original B
Horizontally-oriented
original:
• Copies made on the back side of paper
should always be made one sheet at a time
using the bypass tray.
• Straighten curled or wavy paper before
using it. Curled paper may cause misfeeds,
creases, or a poor-quality image.
Note
If the original is oriented
horizontally, place it with
the top and bottom and
left and right sides
reversed with respect to
the placement of original
A.
Original B
Select the bypass tray with the [TRAY
SELECT] key ( ), and then press the
[START] key ( ).
4
The copy is delivered to the paper output tray.
26
AUTOMATIC TWO-SIDED COPYING
(AR-M205 only)
On models that support automatic two-sided copying, two originals placed on the document glass can be copied
onto each side of a single sheet of paper. In addition, an RSPF can be used to copy two originals onto one sheet of
paper, or one two-sided original onto two sheets of paper, or one two-sided original onto each side of one sheet of
paper.
Original → Paper
Usable paper
One-sided original → Two sides
5-1/2" x 8-1/2", 8-1/2" x 11",
8-1/2" x 11"R, 8-1/2" x 14",
11" x 17"
Document
glass
• The bypass tray cannot be
used.
8-1/2" x 11", 8-1/2" x 11"R,
8-1/2" x 14", 11" x 17"
• Special paper and 5-1/2" x
8-1/2" paper cannot be
used.
One-sided original Two-sided original Two-sided original
2
→ Two sides
→ One side
→ Two sides
RSPF
• The bypass tray can only be
used when making
one-sided copies from
two-sided originals.
• To use paper in the bypass tray, make a two-sided copy as explained in "TWO-SIDED COPYING USING THE
BYPASS TRAY" (p.26).
Note
• When performing automatic two-sided copying of a one-sided original, or one-sided copying of a two-sided
original, the image on the back can be rotated 180 degrees to reverse the top and bottom (Image rotation in
duplex copying). To rotate the image 180 degrees, enable the setting as explained in "IMAGE ROTATION IN
DUPLEX COPYING" (p.29) or in the user programs (p.44), and then follow the steps below. In particular, when
a one-sided "vertical (portrait) original" is placed in a horizontal orientation (8-1/2" x 14" or 11" x 17" size) for
two-sided copying, the top and bottom of the images on the front and back of the paper will be reversed, and
thus this function can be conveniently used to make the top and bottom of the images agree.
If the orientation of
two-sided copying
is changed
Normal automatic
two-sided copying
8-1/2" x 14" or 11" x 17"
portrait original
2
Orientation of the
placed original
1
2
The top and bottom of the
images on the front and
back are the same.
The top and bottom of
the images on the front
and back are reversed.
27
COPY FUNCTIONS
Using the document glass
Using the RSPF
Place the original that you wish to
Place originals in the RSPF. (p.19)
1
1
copy onto the front side of the paper
on the document glass and close the
document cover.
If you place an odd number of originals for
one-sided to two-sided copying, the last page will
be one-sided.
Select the original size. (p.18)
2
When copying 5-1/2" x 8-1/2" originals,
Note
two-sided copies cannot be made from
one-sided originals, and one-sided copies
cannot be made from two-sided originals (this
is because a 5-1/2" x 8-1/2" original cannot be
reversed).
Press the [ORIGINAL TO COPY] key,
and make sure that the
indicator is lit.
3
ORIGINAL TO COPY
Press the [ORIGINAL TO COPY] key
and select the two-sided copy mode
that you wish to use.
2
3
• Two-sided copies from
one-sided originals
ORIGINAL TO COPY
• Two-sided copies from
two-sided originals
Set the number of copies and other
settings, and then press the [START]
key ( ).
4
• One-sided copies from
two-sided originals
The display blinks, and the original is scanned
into memory.
• If you need to clear the data scanned into
memory, press the [CLEAR ALL] key (
Set the number of copies and other
copy settings, and press the [START]
key ( ).
Note
).
• If you wish to cancel two-sided copying and
just make a copy of the first original, press
the [READ-END] key (
).
The copy will be delivered to the paper output
tray.
When the start indicator lights,
remove the first original and then
place the original that you wish to
copy onto the back side of the paper
on the document glass. Close the
document cover.
5
• To cancel automatic two-sided copying,
Note
press the [CLEAR ALL] key (
).
• Do not touch the reversing tray while
automatic two-sided copying is in progress.
Place the second original
in the same orientation
as the first original.
1
2
The first original
The second original
Press the [START] key ( ).
6
The copy will be delivered to the paper output
tray.
28
COPY FUNCTIONS
IMAGE ROTATION IN DUPLEX COPYING
This function is used to invert the top and bottom of the image on the front side of the paper during two-sided copying.
Hold down the [ORIGINAL TO COPY]
1
key until the
indicator blinks.
The currently set setting
code blinks in the first
digit of the number of
copies display.
ORIGINAL TO COPY
Press a numeric key to enter the
setting code.
2
2
To enable the setting,
press [1] key. To disable
the setting, press [0] key.
The factory default
setting is "0".
The entered number
appears in the first digit
of the number of copies
display.
Press the [START] key ( ).
3
4
The selected setting
code stops blinking and
START
lights steadily.
This completes the
setting.
Press the [ORIGINAL TO COPY] key to
exit the setting.
The display returns to the
normal number of copies
display.
ORIGINAL TO COPY
"Image rotation in duplex copying" can also
be enabled or disabled in the user programs.
(p.45)
Note
29
DUAL PAGE COPYING
A dual page original can be automatically separated into two pages during copying. This feature is convenient for
making copies of books and other dual page originals on individual sheets of paper.
Original
Copy
• 8-1/2" x 11" paper is used for dual page copying.
Note
• When rotation copy is enabled (the dual function board must be installed) 8-1/2" x 11"R paper can also be used.
• Dual page copying can be enabled when two-sided copying is enabled.
• Dual page copying can be enabled when Sort/Group copy (p.32).
• When used in combination with XY ZOOM copying, enlargement is not possible.
• Dual page copying cannot be used in combination with the following functions:
• Enlargement
• 2 IN 1/4 IN 1 copying (when the dual function board is installed)
• Center erase (when the dual function board is installed)
• Automatic ratio selection cannot be used when dual page copying is used.
• Dual page copying cannot be selected when an original is placed in the SPF/RSPF.
Place the original on the document
glass, aligning the division between
Use the [TRAY SELECT] key ( ) to
select the paper tray with the "8-1/2" x
11" size.
1
3
4
the pages with the size marker
1
(
8 / ). Close the document
2
Set the number of copies and other
copy settings, and press the [START]
key ( ).
The copy will be delivered to the paper output
tray.
cover/SPF/RSPF.
Copying will begin from
the page to the right of
the size marker.
To cancel dual page copying, press the
81/2
Note
[DUAL PAGE COPY] key. The DUAL PAGE
COPY indicator will go off, indicating that the
function is canceled.
To keep the copies in the correct page order
when performing dual page copying over
multiple pages, make sure that the original is
always placed on the document glass with the
smaller page number to the right.
Note
Press the [DUAL PAGE COPY] key
and make sure that the DUAL PAGE
COPY indicator is lit.
2
DUAL
PAGE
COPY
30
INTERRUPTING A COPY RUN
(Interrupt copying)
A copy run can be temporarily interrupted to allow another copy job to be performed. When the other job is finished,
the copy run will resume using the original copy settings.
Interrupt copying is not possible when the user programs are being configured, or when automatic two-sided
copying, sort/group copying, or 2 IN 1 / 4 IN 1 copying is being performed.
Note
Press the [INTERRUPT] key ( ) to
interrupt the copy run.
When the copy job is finished, press
the [INTERRUPT] key ( ) and remove
the original(s).
The INTERRUPT indicator will go off, indicating
that the interrupt function is no longer operating.
The copy settings will automatically revert to the
settings selected for the copy run before the run
was interrupted.
1
4
5
The INTERRUPT
indicator will light up and
the machine will revert to
the initial settings. (p.12)
The INTERRUPT
INTERRUPT
2
indicator will blink until
the current copy run
stops.
Replace the previous original(s) and
press the [START] key ( ).
The interrupted copy run will resume.
• If the SPF/RSPF is being used, the copy
run will not stop until the set number of
copies is completed.
Note
• If "Auditing mode" is enabled:
"- - -" will appear in the number of copies
display. Enter your 3-digit account number.
Copying will not be possible unless a
correct account number is entered. (p.51)
Remove the previous original(s) and
place the original(s) of the interrupt
copy job.
2
3
Set the number of copies and other
copy settings and then press the
[START] key ( ).
The copy will be
delivered to the paper
C
output tray slightly offset
from the copies of the
interrupted run. (Offset
B
function)
A
The offset function can
be disabled in the user
programs. (p.45)
A: Copies made before the interrupt copy job
B: Interrupt copy job
C: Copies made after the interrupt copy job
31
Chapter 3
CONVENIENT COPY FUNCTIONS
3
This chapter explains convenient copy functions that can be used when the dual function board (AR-EB7) is installed.
ROTATING THE IMAGE 90 DEGREES
(Rotation copy)
When "Auto paper select mode" or "automatic ratio selection" are in operation and the original is placed in a different
orientation (vertical or horizontal) than the paper, the original image will be automatically rotated 90 degrees to
enable correct copying onto the paper.
This function is convenient for copying 8-1/2" x 14" or 11" x 17" originals, which can only be placed horizontally, onto
paper that is loaded vertically.
The rotation copy function is initially enabled. It can be disabled in the user programs. (p.45)
• Rotation copy will not operate when a copy is enlarged to a paper size greater than 8-1/2" x 11". In this case,
place the original in the same orientation as the paper.
Note
• When 2 IN 1 / 4 IN 1 copy is used (p.34), rotation copy will operate even if disabled in the user programs.
Orientation of
Orientation of
Copy
the loaded paper
the placed original
SORT COPY / GROUP COPY
● Copies of multiple original pages can sorted into sets. (Sort copy)
● Copies of multiple original pages can be grouped by page. (Group copy)
The dual function board can scan approximately 100 standard originals (8-1/2" x 11"), however, the number will
vary for photos and other types of originals.
Note
3
3
2
2
1
1
Group copy
Sort copy
32
CONVENIENT COPY FUNCTIONS
Using the document glass
Using the SPF/RSPF
Place the first original. (p.18)
Place the originals. (p.19)
1
1
2
Select the original size. (p.18)
Press the [SORT/GROUP] key to
select the desired mode.
2
If the original size is not selected, 11" x 17" is
automatically used.
The modes are selected
in the order "SORT",
"GROUP", "Off".
SORT
GROUP
Press the [SORT/GROUP] key to
select the desired mode.
3
The modes are selected
in the order "SORT",
"GROUP", "Off".
SORT
GROUP
Set the number of copies and other
settings, and then press the [START]
key ( ).
3
The copies are delivered to the paper output tray.
Set the number of copies and other
settings, and then press the [START]
key ( ).
The ORIGINAL DATA indicator blinks, and the
original is scanned into memory.
• To cancel the Sort/Group copy job, press
4
3
Note
the [CLEAR] key (
).
• To cancel Sort or Group mode, press the
[SORT/GROUP] key repeatedly until the
SORT/GROUP indicators are both off.
To clear the data in memory, press the
[CLEAR ALL] key ( ) or the [CLEAR] key
Note
If the memory becomes full
(
).
• If the memory becomes full while scanning the
originals, the ORIGINAL DATA indicator will
blink, "FUL" will appear in the display, and the
machine will stop copying. In this state, the
paper tray cannot be changed.
• To copy the originals that have been scanned up
to that point, press the [START] key (
• To clear the data that has been scanned into
memory, press the [CLEAR ALL] key ( ) or the
When the start indicator lights,
replace the original with the next
original, and then press the [START]
key ( ).
Repeat step 5 until all originals have been
scanned into memory.
5
6
).
[CLEAR] key (
).
When all originals have been
scanned, and then press the
[READ-END] key ( ).
If the paper output tray becomes full
When the maximum number of pages that can be
held in the paper output tray (250) are output,
copying will temporarily stop. When this happens,
promptly remove the copies and press the [START]
key ( ) to resume copying.
The copies are delivered to the paper output tray.
• To cancel the Sort/Group copy job, press
Note
the [CLEAR] key (
).
• To cancel Sort or Group mode, press the
[SORT/GROUP] key repeatedly until the
SORT/GROUP indicators are both off.
Offset function during Sort/Group copy
The offset function shifts the position of each set or group
of copies in the paper output tray for easy separation.
The offset function setting can be changed in the user
programs. (p.45)
3
3
2
2
1
1
When offset function is disabled
Offset function
33
COPYING MULTIPLE ORIGINALS
ONTO A SINGLE SHEET OF PAPER
(2 IN 1 / 4 IN 1 copy)
Multiple originals can be copied onto a single sheet of paper in a selected layout pattern.
This function is convenient for compiling multi-page reference materials into a compact format, or for providing an
overview of all pages of a document on a single page.
2 IN 1 copy
4 IN 1 copy
Pattern 1
Pattern 2
Pattern 1
Pattern 2
Pattern 3
Pattern 4
•
First select the layout pattern as explained in "Setting the layout pattern" (p.35), and "Border line for 2 IN 1 / 4 IN 1
(solid line or broken line) in the user programs (p.44). When finished, follow the steps below.
Note
• An appropriate ratio setting will be automatically selected based on the size of the originals, the size of the
paper, and the selected number of originals. When using the document glass, reduction is possible to 25%.
When using the SPF/RSPF, reduction is possible to 50%. Certain combinations of original size, paper size, and
number of images may result in images being cut off.
• Even if "Rotation copy" is disabled in the user programs, the original images may be rotated if necessary
depending on their orientation and the orientation of the paper.
• 2 IN 1 / 4 IN 1 copy cannot be used in combination with dual page copying (p.30), XY Zoom (p.24), margin shift
(p.36), or erase copy. (p.37)
Using the document glass
Place the first original. (p.18)
When the start indicator lights,
replace the original with the next
original, and then press the [START]
key ( ).
Repeat step 5 until all originals have been
scanned into memory.
1
5
6
Select the original size. (p.18)
2
If the original size was not selected, 2 in 1 / 4
in 1 copy cannot be used.
Note
To clear the data in memory, press the
[CLEAR ALL] key ( ) or the [CLEAR] key
Note
(
).
Press the [2 IN 1 / 4 IN 1] key to select
the desired mode.
3
When all originals have been scanned,
and the press the [READ-END] key (
The copy is delivered to the paper output tray.
The mode is selected in
the order "2 IN 1", "4 IN
1", "Off".
).
2 IN 1
4 IN 1
2 IN 1
4 IN 1
• To cancel 2 IN 1 / 4 IN 1 copying, press the
[CLEAR] key (
Note
).
• To cancel 2 IN 1 / 4 IN 1 copy mode, press
the [2 IN 1 / 4 IN 1] key repeatedly until the
2 IN 1 / 4 IN 1 indicators are both off.
Set the number of copies and other
settings, and then press the [START]
key ( ).
4
Using 2 in 1 / 4 in 1 copy in combination with
sort copy
Sort copy can be used if the original is placed on the
document glass. Press the [SORT/GROUP] key to
select sort copy and then perform steps 1 through 6.
The 2 in 1 / 4 in 1 copies will be sorted.
The ORIGINAL DATA indicator blinks, and the
original is scanned into memory.
34
CONVENIENT COPY FUNCTIONS
Using the SPF/RSPF
Place the originals. (p.19)
• To cancel 2 IN 1 / 4 IN 1 copying, press the
1
Note
[CLEAR] key (
).
• To cancel 2 IN 1 / 4 IN 1 copy mode, press
the [2 IN 1 / 4 IN 1] key repeatedly until the
2 IN 1 / 4 IN 1 indicators are both off.
Press the [2 IN 1 / 4 IN 1] key to select
the mode.
2
The mode is selected in
the order "2 IN 1", "4 IN
1", "Off".
If the memory becomes full
2 IN 1
4 IN 1
2 IN 1
4 IN 1
• If the memory becomes full while scanning the
originals, the ORIGINAL DATA indicator will
blink, "FUL" will appear in the display, and the
machine will stop copying. In this state, the
paper tray cannot be changed.
• To copy the originals that have been scanned up
to that point, press the [START] key ( ).
• To clear the data that has been scanned into
memory, press the [CLEAR ALL] key ( ) or the
Set the number of copies and other
settings, and press the [START] key ( ).
The copy is delivered to the paper output tray.
3
[CLEAR] key (
).
Setting the layout pattern
You can select the layout pattern for copying 2 original pages or 4 original pages onto one sheet of paper. The
available layout patterns are shown on the first page of this section.
3
Note
The layout pattern can also be selected in the user programs. (p.44)
Use the [2 IN 1 / 4 IN 1] key to access
the setting.
Select the setting code by pressing a
numeric key.
1
2
To select "Pattern 2",
press the [2] key.
Selecting the layout for 2 IN 1 copy
With the 2 IN 1 / 4 IN 1 indicators off, hold down the [2
IN 1 / 4 IN 1] key until the 2 IN 1 indicator blinks.
The setting code of the
currently selected pattern
2 IN 1
will blink in the first digit
4 IN 1
of the display.
Function
Setting code (p.45)
* 1 (Pattern 1)
2 (Pattern 2)
2 IN 1 layout
* 1 (Pattern 1)
2 (Pattern 2)
3 (Pattern 3)
4 (Pattern 4)
4 IN 1 layout
Selecting the layout for 4 IN 1 copy
With the 2 IN 1 indicator lit, hold down the [2 IN 1 / 4 IN
1] key until the 4 IN 1 indicator blinks.
The factory default settings are indicated by " * ".
The entered number blinks in the first digit of the display.
The setting code of the
currently selected pattern
Press the [START] key ( ).
2 IN 1
3
will blink in the first digit
4 IN 1
of the display.
The selected setting code stops blinking and
lights steadily. This completes the setting.
Press the [2 IN 1 / 4 IN 1] key to exit
the setting.
4
The display returns to the number of copies display.
35
CREATING MARGINS WHEN COPYING
(Margin shift)
The MARGIN SHIFT feature, in its initial setting, automatically shifts the text or image to increase the margin by
approximately 1/2".
The location of the margin to be increased can be select to be either at the left edge or the top of the page (AR-M205
only).
Example: Model that supports automatic two-sided copying
Margin
Margin
A
A
A
Original
Left edge
Top edge
• This feature cannot be used with the 2 IN 1 / 4 IN 1 or rotation copy feature.
• This feature cannot be used with non-standard size copy paper. (p.13)
• You can also switch between the left margin and the top margin in the user programs. (p.45)
• The margin width can be changed in the user programs. (p.45)
Note
• Note that a margin is created by shifting the image, and thus if the image is shifted too far, the edge of the image
may be cut off.
• If the ORIGINAL SIZE indicator blinks when margin shift is selected, rotate the original so that it is in the same
orientation as the blinking ORIGINAL SIZE indicator.
Place the original(s).
Set the number of copies and other
settings, and then press the [START]
key ( ).
1
4
If you are using the
document glass, place
the side of the original
where you wish to create
the margin on the right.
The copy is delivered to the paper output tray.
• To cancel margin shift, press the [MARGIN
Note
SHIFT] key repeatedly until the MARGIN
SHIFT indicator is off.
1
• When margin shift is used in combination
with automatic two-sided copying, a margin
is also created automatically on the back
side of the paper directly behind the margin
on the front side.
If you are using the
SPF/RSPF, place the
side of the original where
you wish to create the
margin on the left.
Select the location of the margin
(AR-M205 only)
Follow this step if you are using a model that supports
automatic two-sided copying. On other models, skip to
the next step.
If the original is placed on the document
glass, select the original size. (p.18)
When using the SPF/RSPF, make sure that the
same ORIGINAL SIZE indicator as your original
size lights up.
2
3
Hold down the [MARGIN SHIFT] key until
the MARGIN SHIFT indicator blinks.
1
The currently selected setting code for the margin
position blinks in the display.
Press the [MARGIN SHIFT] key.
1: Left edge
2: Top edge
Press the [1] key or the [2] key, and then
press the [START] key ( ).
The selected setting code for the margin position
blinks.
2
3
The MARGIN SHIFT
indicator lights up.
MARGIN
SHIFT
Press the [MARGIN SHIFT] key.
The MARGIN SHIFT indicator stops blinking.
36
ERASING SHADOWS AROUND THE
EDGES OF A COPY
(Erase copy)
● This feature is used to erase shadows that appear around the edges of copies of books and other thick originals.
(EDGE ERASE)
● The feature can also erase the shadow that appears down the center of books and other originals that open up.
(CENTER ERASE)
● The factory default setting for the width of the erasure is approximately 1/2". The width can be changed in the
user programs. (p.45)
EDGE ERASE
A A
EDGE + CENTER ERASE
Original
Copy
A B A B
CENTER ERASE
Original
Copy
3
A B A B
Original
Copy
• Center erase cannot be used in combination with dual page copy.
• Erase copy cannot be used in combination with 2 IN 1 / 4 IN 1 copy. (p.34)
Note
• Erase copy cannot be used when the paper is a special size or copying from the bypass tray.
• Note that if the width of the erasure is too large, the edge of the image may be partially erased.
Place the original(s). (p.18)
Set the number of copies and other
settings, and then press the [START]
key ( ).
1
2
4
If the original is placed on the
document glass, select the original
size. (p.18)
When using the SPF/RSPF, make sure that the
same ORIGINAL SIZE indicator as your original
size lights up.
The copy is delivered to the paper output tray.
• To cancel erase copy, press the [ERASE]
key repeatedly until the ERASE indicators
Note
are both off.
• If the original size was not selected in step
2, erase copy cannot be used.
Press the [ERASE] key to select the
desired erase mode.
3
To select the "EDGE +
CENTER ERASE" mode,
EDGE
press the [ERASE] key
until both the EDGE and
CENTER indicators light
up.
ERASE
CENTER
37
Chapter 4
PRINTER/SCANNER FUNCTIONS
4
The machine includes a USB 1.1 port and a parallel port as standard equipment.
A computer can be connected to these ports to use the machine as a printer or a scanner.
When the dual function board is used, the following functions can be used in addition to the standard printer/scanner
functions.
• High-speed data transfer (when connected to a USB 2.0 port)
• ROPM* function
• Automatic rotation printing
To use the machine as a printer or scanner, the printer driver or scanner driver must first be installed as explained in
the "Software Setup Guide".
* ROPM is an acronym for "Rip Once Print Many" processing. The ROPM function stores multiple pages of print data in memory
before printing. When printing multiple copies, this eliminates the need for the computer to repeatedly transmit the print data.
• If a problem occurs in printer or scanner mode, see "TROUBLESHOOTING". (p.52)
Note
• Two printer drivers are provided for the machine: a standard printer driver and a printer driver that is used when
the dual function board is installed. Install the correct printer driver depending on whether or not the dual
function board is installed. If the correct printer driver is not installed, printing may not take place correctly. (See
the "Software Setup Guide" for information on installing the printer drivers.)
• When using USB 2.0 (Hi-Speed mode), be sure to read "System requirements for USB 2.0 (Hi-Speed mode)"
(p.38) to verify that your system and the machine settings are configured appropriately.
• Do not install the printer driver for the dual function board when the dual function board is not installed. If this is
done, a warning message will print and printing will be canceled.
• The scanning feature is only available with Windows 98/Me/2000/XP using a USB connection. For users
running Windows 95/NT 4.0 or using a parallel connection, only printing is available.
• When interrrupt copying is being performed, printing or scanning is not possible.
System requirements for USB 2.0 (Hi-Speed mode)
The following system is required to use USB 2.0 (Hi-Speed mode):
• Your computer must be running Windows XP / Windows 2000 and the Microsoft USB 2.0 driver must be
pre-installed, or the USB 2.0 driver for Windows XP / Windows 2000 must be installed using Microsoft's
Windows Update service.
• The "USB 2.0 mode switching" setting in the machine's user programs must be set to "Hi-Speed". To change
the setting, see "USB 2.0 mode switching" in the user programs. (p.46).
* Even when the Microsoft USB 2.0 driver is installed, some USB 2.0 expansion cards are not capable of
attaining the speed stipulated by the Hi-Speed standard. This problem can often be fixed by installing a more
recent driver for the card. To obtain the most recent driver for your card, contact the card's manufacturer.
38
USING THE PRINTER MODE
The procedure for loading paper is the same as for loading copy paper. See "LOADING PAPER". (p.13)
• Print jobs received while the machine is copying or being used in scanner mode will be stored in memory. When
Note
the copy job is finished or scanner mode is exited, the print jobs will begin printing.
• Printing is not possible when the front or side cover is opened for machine maintenance, or when a misfeed
occurs or the machine runs out of paper or toner, or when the drum cartridge reaches its replacement time.
• If an original misfeed occurs in the SPF/RSPF, printing will not be possible until the misfed original is removed
and the SPF/RSPF is restored to a usable state.
BASIC PROCEDURE FOR PRINTING
The basic procedure for printing is explained in the following. To use convenient printer functions, see the "Online
Manual" or the printer driver help file.
Make sure that paper is loaded in the
tray.
The procedure for loading paper is the same as for
copying. See "LOADING PAPER" (p.13) and make
sure the paper that you wish to use is loaded.
Make sure that the printer driver for
the machine is selected, and select
print settings in the printer driver.
For information on the settings in the printer
driver, see the "Online Manual", the Software
Setup Guide, or the printer driver help file.
1
4
Make sure that the paper size setting on the
machine is the same as the paper size set in
Note
Click the "Print" button or the "OK"
button to begin printing.
5
the printer driver.
The print job will be delivered to the paper output
tray.
Make sure that the ON LINE indicator
on the operation panel is lit.
2
4
If the ON LINE indicator
Important points when setting the paper size
• Make sure that the tray's paper size setting is the
same as the tray's paper size setting in the printer
driver. For example, if the tray's paper size setting is
8-1/2" x 11"R, set "Setting Paper Size" to "Letter-R".
For more information, see "CONFIGURING THE
PRINTER DRIVER" (p.11) in the "Software Setup
Guide".
• If the dual function board is not installed, printing will
not take place correctly if the tray paper size setting
is 8-1/2" x 11"R. To prevent incorrect printing when
the tray paper size setting is 8-1/2" x 11"R, specify
is not lit, press the [ON
LINE] key. When the
indicator is not lit, the
machine is off-line and
cannot print. When the
indicator is blinking, the
machine is printing a
print job from memory.
ON LINE
Open the file that you wish to print
and select "Print" from the File menu.
3
Pausing a print job
To pause a print job during printing, press the [ON LINE] key on the operation panel to switch the machine off-line.
Printing will be paused and the ON LINE indicator will blink.
To cancel a print job, press the [CLEAR] key ( ) or the [CLEAR ALL] key ( ).
To resume printing, press the [ON LINE] key to switch the machine online.
When "Use close paper size" is disabled
The PAPER SIZE indicator on the operation panel will blink. You can press the [TRAY SELECT] key ( ) to select a
tray manually, or load paper in the bypass tray and press the [ON LINE] key to begin printing.
When "Use close paper size" is enabled
Printing will take place using a size of paper that is close to the size of the print image.
• When the dual function board is installed, the print image is automatically rotated to fit the paper in the event that
the paper is loaded in an orientation different from the print image.
Note
•
For limitations on copying in print mode, scanner mode limitations, and print mode limitations in copy and scanner
mode, see "OPERATION IN COPY, PRINTER, AND SCANNER MODES". (p.41)
39
USING THE SCANNER MODE
The procedure for placing the original is the same as for copying. See "NORMAL COPYING". (p.18)
Scanner mode cannot be used at the following times:
• A misfeed has occurred (paper misfeed or original misfeed in the SPF/RSPF).
• The user programs are being used.
Note
• The tray paper size is being set.
• Automatic exposure adjustment is in progress.
• When the toner save mode setting is being changed.
• The machine is being used in copy mode.
• The front or side cover is open.
SCANNING USING THE KEYS ON THE MACHINE
The procedure for scanning using the [SCAN] key and [SCAN MENU] keys is explained in the following. When
scanning is performed by this method, the application that has been set in Button Manager will automatically start
and the scanned image will be pasted into the application.
If the machine is in copy mode, press the [SCAN] key to switch to scanner mode and clear the previously set copy
settings.
Note
Press the [SCAN] key.
Press a [SCAN MENU] key to begin
scanning.
1
3
When the SCAN
indicator lights up, the
machine enters scanner
mode.
SCAN
1
2
1
2
The display will show the
number of the [SCAN
MENU] key that you
pressed, and the number
will blink.
When the machine enters
scan mode, either one of
the displays at left
appears depending on
the port that is used for
the connection.
• To return to copy mode from scanner
mode, press the [SCAN] key, [CLEAR] key
Note
If both USB 1.1 and USB 2.0 ports are connected,
press the scan key one or more times to select the
desired port. The ports are selected in the order "U_2",
"U_1", "Scan mode off".
(
) or [CLEAR ALL] key (
).
• For limitations on copying and printing in
scanner mode, and scanner mode while
copying or printing, see "OPERATION IN
COPY, PRINTER, AND SCANNER MODES".
(p.41)
• If you find it difficult to remove the original
from the document feeder tray, open the
feeding roller cover first and then remove
the original. If you remove the original
without opening the feeding roller cover, the
original may become dirty.
Place the original in the document
2
feeder tray or on the document glass.
40
PRINTER/SCANNER FUNCTIONS
[SCAN MENU] keys and the Button Manager scan menu
The six [SCAN MENU] keys can be configured separately in Button Manager for the computer connected to the USB
1.1 port and the computer connected to the USB 2.0 port.
The factory default settings for the [SCAN MENU] keys and Button Manager are as follows. For information on
Button Manager settings, see the Button Manager help file.
It is convenient to write the Button Manager
SCAN
settings for the computer connected to the
1
2
1
2
3
4
5
6
1
USB 1.1 port to the right of
, and the Button
Manager settings for the computer connected
2
to the USB 2.0 port to the right of
.
Key position
Name in display
Button Manager menu
ScanMenu SC1
ScanMenu SC2
ScanMenu SC3
ScanMenu SC4
ScanMenu SC5
ScanMenu SC6
Application that starts
Sharpdesk (Full color)
Sharpdesk (Monochrome)
Email
1 (key on far left)
SC1
SC2
SC3
SC4
SC5
SC6
2 (2nd key from left)
3 (3rd key from left)
4 (4th key from left)
5 (5th key from left)
6 (key on far right)
FAX
OCR
Microsoft Word
SCANNING FROM YOUR COMPUTER
The machine supports the TWAIN standard, making it possible to scan from TWAIN-compliant applications. The
machine also supports WIA (Windows Image Acquisition), making it possible to scan from the "Scan and Camera
Wizard" in Windows XP. See the Online Manual for the procedures for TWAIN and WIA scanning. For information
on TWAIN and WIA settings, see the help file for the scanner driver or Windows Help.
4
OPERATION IN COPY, PRINTER,
AND SCANNER MODES
Some operations cannot be performed simultaneously when the machine is being used in printer mode, copy mode,
or scanner mode.
Scanning from a
computer
Scanning from
the machine
Modes
Copying
Printing
Copy key input
During copying
During printing
Yes
Yes
Yes
No
No
No
Copy
1
2
Yes*
No*
3
4
4
Printer
Yes*
No
Yes*
Yes*
During scan preview/
during scanning
5
Scanner
No
No*
No
No
1
* Can be used after pressing the [INTERRUPT] key ( ).
2
* Printing will begin when the [CLEAR ALL] key (
) is pressed after the copy job is finished, or when the [ON LINE] key is
pressed to switch the machine online. Printing will also begin after the set auto clear time elapses, or after 60 seconds if "Auto
clear timer" is disabled.
* The print job is paused and copying begins. However, automatic two-sided copying is not possible. A two-sided print job will not
be paused and copying will not begin until the job is finished.
* The scan job is stored and scanning begins when the print job is finished.
* The print job is stored in the computer and printing begins when the scan job is finished.
3
4
5
41
Chapter 5
USER SETTINGS
5
This chapter explains how to set the automatic exposure level, toner save mode, and the user programs, which are
custom settings that control fine points of the machine’s operation.
ADJUSTING THE AUTOMATIC
EXPOSURE LEVEL
The exposure level used in automatic exposure adjustment, which automatically adjusts the copy exposure
according to the original, can be adjusted. If copies tend to be too dark or too light when automatic exposure
adjustment is used, follow the steps below to adjust the automatic exposure level.
The automatic exposure level can be adjusted separately for the document glass and the SPF/RSPF.
Note
The copy, scanner and printer functions cannot be used while the automatic exposure level is being adjusted.
To adjust the automatic exposure
level in the SPF/RSPF, place the
original in the SPF/RSPF. (p.19)
Make sure that the SPF/RSPF indicator is lit.
Press the [Light] key ( ) or [Dark]
key ( ) to lighten or darken the
automatic exposure level as desired.
1
4
5
1 3 5
To adjust the automatic exposure level for
copies made from originals placed on the
Note
document glass, proceed to step 2.
Press the [AUTO/TEXT/PHOTO] key to
select "PHOTO".
2
3
Press the [AUTO/TEXT/PHOTO] key to
complete the setting.
The AUTO indicator stops blinking and lights
steadily.
Hold down the [AUTO/TEXT/PHOTO]
key until the AUTO indicator blinks.
The exposure level
indicators show the
current setting.
After adjusting the automatic exposure level,
it is recommended that you make a test copy
to check the new level.
AUTO
TEXT
PHOTO
Note
1 3 5
42
ENABLING TONER SAVE MODE
Toner save mode can be enabled to reduce toner consumption by about 10%.
Press the [AUTO/TEXT/PHOTO] key to
select "TEXT".
1
Hold down the [AUTO/TEXT/PHOTO]
key until the PHOTO indicator blinks.
2
The exposure level
indicators show the
current setting.
AUTO
TEXT
PHOTO
1 3 5
To enable toner save mode, press the
[Light] key ( ). To disable toner save
mode, press the [Dark] key ( ).
When enabling toner
3
4
save mode, make sure
1 3 5
the "1" light blinks.
When disabling toner
save mode, make sure
the "5" light blinks.
5
Press the [AUTO/TEXT/PHOTO] key to
complete the setting.
The PHOTO indicator stops blinking and lights
steadily.
43
CUSTOMIZING SETTINGS
(User programs)
The user programs allow you to customize the machine to match your needs.
USER PROGRAMS
Setting codes
Program
number
Program name
(factory default setting
appears in bold)
Explanation
1: OFF
• "Auto clear time" automatically returns the copy
settings to the initial settings (p.12) when a
certain period of time elapses after a copy is
made. This program is used to select the period
of time. "Auto clear time" can also be disabled.
2: 10 sec.
3: 20 sec.
4: 60 sec.
5: 90 sec.
6: 120 sec.
1
Auto clear time
• This function automatically switches the
machine to a low power consumption state if
the set duration of time elapses without the
machine being used when the power is on. The
POWER SAVE indicator lights up, however, the
keys on the operation panel can be used.
Normal operation automatically resumes when
a key on the operation panel is pressed, an
original is placed, a print job is received, or
scanning is begun from a computer.
1: 1 min.
2: 5 min.
3: 30 min.
4: 60 min.
5: 120 min.
6: 240 min.
2
Preheat mode
• This function automatically switches the
machine to a state that consumes even less
power than preheat mode if the set duration of
time elapses without the machine being used
when the power is on. All lights except the
POWER SAVE indicator and ON LINE indicator
go off. To resume normal operation, press the
1: 5 min.
2: 30 min.
3: 60 min.
4: 120 min.
5: 240 min.
Auto power shut-off
timer
3
[START] key (
). Normal operation also
resumes automatically when a print job is
received or scanning is begun from a computer.
While in auto power shut-off mode, no keys
(except the [START] key (
)) can be used.
• When copying using the SPF/RSPF, during the
period of time that the SPF/RSPF indicator
blinks after an original has been scanned
(about 5 seconds), a subsequent original can
be placed and automatically fed into the
machine.
0: OFF
1: ON
4
Stream feeding mode*1
Auto power shut-off
setting
0: OFF
• Use this setting to enable or disable auto power
shut-off.
5
6
1: ON
• When copying multiple originals onto a single
sheet of paper (2 IN 1 / 4 IN 1 copy), this
function can be used to print a solid or broken
borderline around each original image.
1: OFF
2: Solid line
3: Broken line
Border line for 2 IN 1 / 4
IN 1*2
1
2
* On models with a SPF/RSPF.
* On models with a dual function board.
44
USER SETTINGS
Setting codes
(factory default setting
appears in bold)
Program
number
Program name
Explanation
• When the auto paper select function is enabled
and there is no paper that is the same size as
the original and loaded in the same orientation,
this function will automatically select paper of
the same size that is loaded in the opposite
orientation, and rotate the image 90 degrees so
that it is copied on the paper in the correct
orientation.
0: OFF
1: ON
*2
7
Rotation copy
• When the auto ratio select function is operating
and the original and paper are loaded in
opposite orientations, this function rotates the
image so that it is copied on the paper in the
correct orientation.
• This function automatically selects paper that is
the same size as the original placed in the
SPF/RSPF, or the same size as that selected
with the [ORIGINAL SIZE ENTER] key. The
function can be disabled.
0: OFF
1: ON
8
Auto paper select mode
• If the paper runs out during printing and there is
paper of the same size and orientation in
another tray, this function automatically
switches to that tray (excluding the bypass
tray). The function can be disabled.
0: OFF
9
10 to 15
16
Auto tray switching
Auditing mode
1: ON
–
See "Enabling Audit Mode". (p.50)
1: 0"
• Use this setting to set the width of erasure of
shadows that appear around the edges and at
the binding margin when a book or similar
original is copied.
2: 1/4"
3: 1/2"
4: 3/4"
5: 1"
Erase width
adjustment*2
• Use this setting to select the layout pattern
when two original pages are copied onto a
single sheet of paper (see page 34 for the
layout patterns).
5
1: Pattern 1
17
18
19
Layout in 2 IN 1 copy*2
Layout in 4 IN 1 copy*2
2: Pattern 2
1: Pattern 1
2: Pattern 2
3: Pattern 3
4: Pattern 4
• Use this setting to select the layout pattern
when four original pages are copied onto a
single sheet of paper (see page 34 for the
layout patterns).
• When enabled, this function offsets the position
in the paper output tray of interrupt copy jobs,
sets of copies during sort/group copy, and print
jobs when using the printer function.
Offset of paper output 0: OFF
tray
1: ON
• When a one-sided vertical (portrait) original is
placed in a horizontal orientation (8-1/2" x 14"
or 11" x 17" size) for two-sided copying, the top
and bottom of the images on the front and back
of the paper will be opposite to each other.
Image rotation in
duplex copying*3
0: OFF
20
21
22
1: ON
Location of the
margin*2,*3
1: Left edge
2: Top edge
• Use this setting to switch between the margin at
the top edge and the margin at the left edge.
1: 0"
2: 1/4"
3: 1/2"
4: 3/4"
5: 1"
Margin width*2
• Use this setting to set the margin width.
• The copy resolution in auto and text mode is
normally 300 dpi. If high-quality copies are
preferred, use this setting to change the
resolution to 600 dpi.
Resolution in Auto/Text 1: 300dpi
mode 2: 600dpi
23
2
3
* On models with a dual function board.
* On models with automatic two-sided copying.
45
USER SETTINGS
Setting codes
(factory default setting
appears in bold)
Program
number
Program name
Explanation
1: 30%
2: 40%
3: 50%
4: 60%
5: 70%
Memory allocated to
printer mode
• Use this to change the proportion of machine
memory used for printer mode.
24
• Use this setting to select whether or not holding
down a key causes repeated input of the key.
For keys that normally cause a set value to
increase when held down (for example, holding
0: OFF
1: ON
25
Key auto repeat
down the [ZOOM] key (
,
)), this program
can be used to have the set value not change
when the key is held down.
1: Minimum
(current response speed)
2: 0.5 sec.
• Use this setting to select how long a key must
be pressed for the input to be accepted. By
selecting a longer time, you can prevent
settings from being changed by the accidental
pressing of a key.
26
27
Key press time
3: 1.0 sec.
4: 1.5 sec.
5: 2.0 sec.
1: Low
(current volume)
2: High
Audible signals volume
• This sets the volume of beep signals. (p.47)
3: OFF
Base setting beep
signal
0: OFF
• Use this to sound a beep when a base setting is
selected. (p.47)
28
29
1: ON
1: 99 copies
2: 999 copies
• Use this setting to select 99 or 999 for the
maximum number of copies.
Number of copies limit
• When this function is enabled, printing in printer
mode will automatically continue using a
different size of paper if the specified size of
paper runs out in all trays. This feature does not
function in copy mode.
0: OFF
1: ON
30
Use close paper size
1: Upper paper tray*4
2: Lower paper tray*4
3: 250-sheet paper feed
unit/
Upper paper tray of 2
x 250-sheet paper*4
feed unit
• Use this program to select a default tray. This
tray is automatically selected each time the
power is turned on or each time the machine
reverts to the initial settings.
31
Default tray setting
4: Lower paper tray of 2
x 250-sheet paper
feed unit*4
5: Bypass tray*4
1: AUTO
Default exposure mode 2: TEXT
3: PHOTO
• Use this program to set "AUTO", "TEXT", or
"PHOTO" as the default exposure mode.
32
33
This sets the USB 2.0 data transfer speed. To
obtain the fastest speed when using the USB 2.0
port, first verify that your computer meets the
system requirements (operating system and
driver), and then use this program to change the
USB 2.0 mode to "Hi-Speed". Note that the setting
should not be changed while running a TWAIN
driver. (For the system requirements, see "System
requirements for USB 2.0 (Hi-Speed mode)"
(p.38).)
USB 2.0 mode
switching*5
1: Full-Speed
2: Hi-Speed
4
* AR-M160 is as follow:
1: Upper tray (factory default), 2: 250-sheet paper feed unit/Upper paper tray of 2 x 250-sheet paper feed unit,
3: Lower paper tray of 2 x 250-sheet paper feed unit, 4: Bypass tray
* The scanning speed increases when the USB 2.0 mode is set to "Hi-Speed", however, the printing speed does not increase
considerably.
5
46
USER SETTINGS
SELECTING A SETTING FOR A USER PROGRAM
Hold down the [Light] key ( ) until
Enter the desired setting code by
pressing a numeric key.
1
4
the alarm indicators ( ,
) blink.
,
,
,
• For the setting codes,
see "USER
PROGRAMS". (p.44 to
p.46)
• The selected setting
code blinks.
The display shows "- -"
with the left hyphen
blinking.
1 3 5
• To select 90 seconds,
press the [5] key.
If you enter the wrong number, press the
Note
Enter the program number with the
numeric keys.
[CLEAR] key (
) and return to step 2.
2
• See "USER
Press the [START] key ( ).
PROGRAMS" (p.44 to
p.46) for the program
numbers.
• The selected program
number blinks.
• To select "Auto clear
timer", press the [1]
key.
5
The selected setting
code stops blinking and
lights steadily.
START
If you enter the wrong number, press the
Note
[CLEAR] key (
number.
) and then enter the correct
To select a setting for another user program,
Note
press the [CLEAR] key (
to step 2.
) and then return
5
Press the [START] key ( ).
3
Press the [Light] key ( ) to complete
the settings.
6
• The selected program
number stops blinking
and lights steadily.
• The currently selected
setting code blinks in
the 1st digit of the
display.
START
The alarm indicators ( ,
,
,
,
) go
off and the display returns to the number of
copies display.
Audible signals (key entry beep, invalid key beep, base setting beep)
The machine sounds three different types of beep signals: a key entry beep that sounds when a valid key is
pressed, an invalid key beep that sounds when an invalid key is pressed, and a base setting beep that sounds
when a setting is the same as the base setting (base settings are explained below). The base setting beep is
initially disabled. If you wish to enable the base setting beep, see "Base setting beep signal" on page 46. If you
wish to change the volume of the beep signals or disable them, see "Audible signals volume" on page 46.
The beep patterns of each type of beep signal are as follows:
Key entry beep ......................... One beep
Base setting beep ................Three beeps
Invalid key beep ......................Two beeps
Base settings
The base settings are preset standard selections for each copy setting. The base settings are as follows:
Copy ratio ........................................100%
Light and Dark indicator........................ 3
Paper feed location....... Upper paper tray
ORIGINAL SIZE..........................8-1/2" x 11"
AUTO/TEXT/PHOTO .......................... AUTO
47
SETTINGS FOR AUDITING MODE
AUDITING MODE
When "Auditing mode" is enabled, a count is kept of the number of copies made by each account (up to 20 accounts
can be established), and the counts can be displayed and totaled as necessary. In "Auditing mode", the display
shows "- - -", and this indicates that a 3-digit account number must be entered in order to use the machine for
copying.
The administrator of the machine should complete the following settings:
Note
• Enable "Auditing mode" (p.50)
• Account number entry (p.50)
AUDITING MODE SETTINGS
Setting codes
(factory default settings
are indicated in bold)
Program
number
Program name
Explanation
0: OFF
Use to enable or disable "Auditing mode".
"Auditing mode" is initially disabled.
10
11
12
Auditing mode
1: ON
Use to set up account numbers. Up to 20
accounts can be established.
Account number entry None
Account number
None
Use to change an account number.
change
Use to delete an account number.
A single account number can be deleted, or all
account numbers at once.
Account number
deletion
0: Delete single account
13
14
15
1: Delete all accounts
This displays the number of copies made by
each account.
The maximum count is 49,999. If this number is
exceeded, the count will start over from 0.
Number of copies per
account
None
Use to reset the copy count of an account to 0.
The copy count of a single account or of all
accounts can be reset.
0: Reset single account
1: Reset all accounts
Resetting account
48
USER SETTINGS
SELECTING AUDITING MODE SETTINGS
Hold down the [Light] key ( ) until
Press the [Light] key ( ) to complete
the settings.
1
5
the alarm indicators ( ,
) blink.
,
,
,
The alarm indicators ( ,
,
,
,
) go
off and the display returns to the number of
copies display.
The display shows "- -"
with the left hyphen
blinking.
1 3 5
Enter the program number with the
numeric keys.
2
• See "AUDITING MODE
SETTINGS" (p.48 to
p.49) for the program
numbers.
• The selected program
number blinks.
• To select "Auditing
mode", enter "10".
If you enter the wrong number, press the
Note
[CLEAR] key (
number.
) and then enter the correct
Press the [START] key ( ).
3
4
5
• The selected program
number stops blinking
and lights steadily.
• The currently selected
setting code blinks in
the 1st digit of the
display.
START
Enter the desired setting code for the
program as explained in the detailed
procedures on the following pages.
For the setting codes,
see "AUDITING MODE
SETTINGS". (p.48 to
p.49)
END
• If you enter the wrong number, press the
Note
[CLEAR] key (
) and return to step 2.
• If "E" (error code) blinks in the first digit of
the display, press the [CLEAR] key (
and return to step 2.
)
49
USER SETTINGS
Auditing mode
(program No.10)
Account number deletion
(program No.13)
1 Press the [1] key to enable "Auditing
mode" or the [0] key to disable it, and then
press the [START] key ( ).
Use this procedure to delete account numbers. A
single account number can be deleted, or all account
numbers at once.
If no account numbers have been established, the
error code "13E" will appear in the display.
After enabling "Auditing mode", use "Account
Note
number entry" to establish account numbers
for each account (up 20 accounts can be
established).
[Deleting all accounts at once]
Press the [1] key and then press the [START]
key ( ).
2 Press the [CLEAR] key ( ).
All account numbers will be deleted.
Account number entry
[Deleting a single account]
1 Press the [0] key.
2 Select the account number to be deleted
with the [Copy ratio display] key ( ) and
then press the [START] key ( ).
(program No.11)
If 20 accounts have already been established, the
error code "11E" will appear in the display.
1 Use the numeric keys to enter a 3-digit
number (any number except "000") and
then press the [START] key ( ).
To delete another account number, enter the
Note
• If you enter "000" or a number that has
program number (13) for account number
deletion and then repeat step 2 of "Deleting a
single account".
Note
already been stored, the number will blink
in the display. Enter a different number.
(Up to 20 accounts can be established.)
• Repeat the same procedure to enter any
other account numbers that you wish to
establish.
Number of copies per account
(program No.14)
• Keep a record of what group is using each
account number (account names cannot be
stored, so keep a record to prevent
confusion when totaling account counts).
Use this procedure to display the copy count of each
account. If no account numbers have been
established, the error code "14E" will appear in the
display.
2 Press the [CLEAR] key ( ).
1 Select the account number with the [Copy
ratio display] key ( ).
2 Hold down the [0] key.
The copy count of the selected account will appear in
the display while you hold down the [0] key. The count
is displayed sequentially as shown below.
Account number change
(program No.12)
Use this procedure to change an account number. If
no account numbers have been established, the error
code "12E" will appear in the display.
Example: 12,345 copies
1 Press the [Copy ratio display] key ( ) to
select the account number that you wish to
change, and then press the [START] key
(
).
The display will show 3 blinking hyphens "- - -".
• Each 11" x 17" size page is counted as two
pages.
• To view the copy count of another account,
repeat steps 1 and 2.
2 Press the numeric keys to enter a new
account number (any 3-digit number
except "000"), and then press the [START]
key ( ).
Note
3 When finished, press the [CLEAR] key
).
(
• If you enter "000" or a number that has
Note
already been stored, the number will blink
in the display. Enter a different number.
• To change another account number, repeat
steps 1 and 2.
3 When finished, press the [CLEAR] key
(
).
50
USER SETTINGS
Resetting account
(program No.15)
Copying when "Auditing mode" is
enabled
The copy count of a single account or all accounts can
be reset to 0. If no account numbers have been
established, the error code "15E" will appear in the
display.
When "Auditing mode" is enabled, "- - -" appears in the
display.
[Resetting all accounts]
Press the [1] key and then press the [START]
key ( ).
The copy counts of all accounts will be deleted.
[Resetting a single account]
1 Press the [0] key.
2 Select the account number to be reset with
the [Copy ratio display] key ( ) and then
press the [START] key ( ).
Enter your 3-digit account number
with the numeric keys.
When you enter your account number, "0"
appears in the display to indicate that copying is
possible.
1
To reset another account, enter the program
number (15) for account resetting and then
Note
If you enter an incorrect number, press the
repeat step 2 of "Resetting a single account".
Note
[CLEAR] key (
number.
) and then enter the correct
Follow the appropriate steps to make
the copy.
2
3
If you are performing an interrupt copy (p.31),
Note
be sure to press the [INTERRUPT] key (
when finished to exit interrupt mode.
)
5
When finished, press the [AUDIT
CLEAR] key.
AUDIT CLEAR
If a misfeed occurs or the paper runs out
during copying, your session will not end even
if the [AUDIT CLEAR] key is pressed.
Note
51
Chapter 6
TROUBLESHOOTING
6
This chapter describes troubleshooting and misfeed removal.
TROUBLESHOOTING
If you experience difficulty using the machine, check the following troubleshooting guide before calling for service.
Many problems can be easily resolved by the user. If you are unable to solve the problem using the troubleshooting
guide, turn off the power switch and unplug the machine, and contact your SHARP service center.
MACHINE/COPYING PROBLEMS
The machine does not operate. ...................................................................................................................... 53
Copies are too dark or too light....................................................................................................................... 53
Blank copies.................................................................................................................................................... 53
The paper size used for the copy is different from the selected paper size.................................................... 53
Wrinkles appear in the paper or the image disappears in places. .................................................................. 53
Paper misfeed................................................................................................................................................. 54
Original size not selected automatically.......................................................................................................... 54
Copies are smudged or dirty........................................................................................................................... 54
White or black lines appear on copies. ........................................................................................................... 54
Paper size for a paper tray cannot be set. ...................................................................................................... 55
A copy job stops before it is finished............................................................................................................... 55
The POWER SAVE indicator is lit................................................................................................................... 55
Any of the alarm indicator (
,
,
,
,
) is lit or blinking. ................................................................... 55
Lighting fixture flickers..................................................................................................................................... 55
PRINTING AND SCANNING PROBLEMS
The machine does not print. (ON LINE indicator does not blink.)................................................................... 56
The machine does not print. (ON LINE indicator was blinking.)...................................................................... 56
Printing is slow. ............................................................................................................................................... 56
The printed image is light and uneven. ........................................................................................................... 56
The printed image is dirty................................................................................................................................ 57
The printed image is skewed or it runs off the paper. ..................................................................................... 57
Lines in tables are not aligned correctly and gaps appear.............................................................................. 58
Any of the alarm indicator (
,
,
,
,
) is lit or blinking. ................................................................... 58
Poor scanning quality...................................................................................................................................... 59
Unable to scan the image. .............................................................................................................................. 60
Notice page printed......................................................................................................................................... 61
Removing the software ................................................................................................................................... 61
INDICATORS AND DISPLAY MESSAGES ..................................................... 62
MISFEED REMOVAL........................................................................................ 63
REPLACING THE TONER CARTRIDGE ......................................................... 70
52
TROUBLESHOOTING
MACHINE/COPYING PROBLEMS
The following problems are related to the general operation of the machine and copying.
Problem
Cause and solution
Page
The machine is not plugged into a power outlet.
→ Plug the machine into a grounded outlet.
–
Power switch OFF.
→ Turn the power switch ON.
12
The POWER SAVE indicator is blinking.
→ Indicates that the machine is warming up. Copies cannot be
made until the machine has finished warming up.
12
–
The front cover or the side cover is not completely
closed.
→ Close the front cover or the side cover.
The machine does not operate.
The machine is in auto power shut-off mode.
→ In auto power shut-off mode, all lights are off except the POWER
SAVE indicator and ON LINE indicator. Press the [START] key
12
(
) to resume normal operation.
ORIGINAL SIZE indicator is blinking.
→ If the ORIGINAL SIZE indicator blinks when margin shift is
selected, rotate the original so that it is in the same orientation as
the blinking ORIGINAL SIZE indicator.
36
14
PAPER SIZE indicator is blinking.
� � � �
→ There is no appropriate paper. Load appropriate paper in a paper
tray.
Select the correct original type for the original.
→ Select AUTO with the [AUTO/TEXT/PHOTO] key or press the
[Light] key ( ) and [Dark] key ( ) to manually select an
appropriate exposure.
→ If the copy is too light or too dark even though AUTO was
selected with the [AUTO/TEXT/PHOTO] key, adjust the
automatic exposure level.
21
42
Copies are too dark or too light.
The original is not placed face up in the SPF/RSPF or face
down on the original table.
→ Place the original face up in the SPF/RSPF or face down on the
original table.
6
Blank copies.
18, 19
18, 19
22
The original was not placed in the correct position.
→ Place the original correctly.
An appropriate ratio was not used for the size of the
original and the size of the paper.
→ Press the [AUTO IMAGE] key to have the copy made using the
appropriate ratio for the original and paper.
The paper size used for the copy is
different from the selected paper
size.
(part of the image is cut off or there
The size of paper loaded in the tray was changed without
changing the tray's paper size setting.
→ Be sure to change the tray's paper size setting whenever you
change the size of paper loaded in the tray.
is too much blank space.)
16
13
–
The paper is outside of the specified size and weight
range.
→ Use copy paper within the specified range.
Wrinkles appear in the paper or
the image disappears in places.
Paper damp.
→ Replace with dry copy paper. During periods when the machine is
not used for a long time, remove the paper from the tray and store
it in a dark place in a bag to prevent moisture absorption.
53
TROUBLESHOOTING
Problem
Cause and solution
Page
Misfeed occur.
→ To remove the misfeed, see "MISFEED REMOVAL".
63
The paper is outside of the specified size and weight
range.
→ Use copy paper within the specified range.
13
–
Paper curled or damp.
→ Do not use curled or crimped paper. Replace with dry copy paper.
During periods when the machine is not used for a long time,
remove the paper from the tray and store it in a dark place in a
bag to prevent moisture absorption.
Paper is not loaded properly.
→ Make sure the paper is properly installed.
14
63
Pieces of paper inside machine.
→ Remove all pieces of misfed paper.
Too much paper is loaded in the tray.
→ If the stack of paper is higher than the indicator line on the tray,
remove some of the paper and reload so that the stack does not
exceed the line.
Paper misfeed.
14
Some sheets of paper stick together.
→ Fan the paper well before loading it.
14
15
The guides on the bypass tray do not match the width of
the paper.
→ Adjust the guides to match the width of the paper.
The bypass tray extension is not pulled out.
→ When loading a large size of paper, pull out the extension.
15
73
The bypass paper feed roller is dirty.
→ Clean the roller.
5-1/2" x 8-1/2" paper is loaded in lower paper tray or in the
250-sheet or 2 x 250-sheet paper feed unit.
→ 5-1/2" x 8-1/2" size paper must be loaded in upper paper tray or
the bypass tray.
13, 14
Paper curled or damp.
→ D
�
–
–
� � �
r
b
Original size not selected
automatically.
(When the SPF/RSPF is installed.)
The original include any large black solid areas.
→ If the original includes any large black solid areas, the original
size may not be detected automatically. Use the [ORIGINAL SIZE
ENTER] key to select the paper size.
The machine is directly exposed to sunlight.
→ Install in a location that is not exposed to sunlight.
–
The document glass or the underside of the document
cover/SPF/RSPF is dirty.
72
→ Clean regularly.
Copies are smudged or dirty.
Original smudged or blotchy.
→ Use a clean original.
–
The scanner glass in the SPF/RSPF is dirty.
72
73
→ Clean the long, narrow glass in the SPF/RSPF.
White or black lines appear on
copies.
The transfer charger is dirty.
→ Clean the transfer charger.
54
TROUBLESHOOTING
Problem
Cause and solution
Copying or printing is performed.
Page
–
→ Set the paper size after copying or printing is complete.
The machine has stopped temporarily due to running out
of paper or a misfeed.
→ Load paper or remove the misfeed, and then set the paper size.
14, 63
31
Paper size for a paper tray cannot
be set.
An interrupt copy job is in progress.
→ Set the paper size after the interrupt copy job is finished.
The display or the ORIGINAL DATA indicator is blinking.
→ Data is being held in memory. Print the data in memory or clear it
from memory.
33, 35
The paper output tray is full.
→ Long copy runs are automatically paused every 250 copies.
Remove the copies in the paper output tray and press the
22
[START] key (
) to resume copying.
"FUL" appear in the display.
→ The memory became full during sort/group copy or 2 IN 1 / 4 IN 1
copy. Copy only the originals that have been scanned to that
point, or cancel the job and clear the data from memory.
33, 35
14
A copy job stops before it is
finished.
The tray is out of paper.
→ Load paper.
A paper feed location is blinking.
→ A blinking paper feed location means that the size of paper
loaded in the tray is different from the paper size setting for the
tray. Change the paper size setting, open and close the tray, and
16
then press the [CLEAR] key (
) or [CLEAR ALL] key (
).
Any other indicators are lit.
12
12
62
→ If other indicators are lit, the machine is in "Preheat mode". Press
any key on the operation panel to resume normal operation.
The POWER SAVE indicator is lit.
Any of the alarm indicator
The POWER SAVE indicator is only lit.
→ If only the POWER SAVE indicator is lit, the machine is in auto
power shut-off mode. Press the [START] key (
normal operation.
) to resume
6
See "INDICATORS AND DISPLAY MESSAGES" to check
the meaning of the alarm indicator and error message in
the display, and take appropriate action.
(
,
,
,
,
) is lit or
blinking.
The same power outlet used is for the lighting fixture and
the machine.
→ Connect the machine to a power outlet which is not used for other
electric appliances.
Lighting fixture flickers.
–
55
TROUBLESHOOTING
PRINTING AND SCANNING PROBLEMS
In addition to this section, troubleshooting information can also be found in the README files for each of the
software programs. To view a README file, see the "Software Setup Guide".
Problem
Cause and solution
Page
The machine is set to ONLINE mode.
→ Press the [ON LINE] key to turn on the ON LINE indicator.
39
The machine is not correctly connected with your
computer.
→ Check both ends of the printer cable and make sure you have a
solid connection. Try a known good cable. For information on
cables, see "SPECIFICATIONS".
The machine does not print.
(ON LINE indicator does not blink.)
78
The port setting is correct.
→ Printing is not possible if the printer driver port setting is not
correct. Set the port correctly.
Software
Setup
Guide
Copy job is performed.
→ Wait until the copy job is complete.
–
The tray size settings are the same on the machine and in
the printer driver.
→ Make sure that the same tray paper size is set on the machine
and in the printer driver. To change the tray paper size setting in
the printer driver, see the Software Setup Guide.
16
Software
Setup
Guide
The specified size of paper has been loaded.
→ Load the specified size of paper in the paper tray.
The machine does not print.
(ON LINE indicator was blinking.)
14
All paper feed location indicators are blinking.
→ When "Use close paper size (user program)" is disabled, the
PAPER SIZE indicator on the operation panel will blink. You can
press the [TRAY SELECT] key ( ) to select a tray manually, or
load paper in the bypass tray and press the [ON LINE] key to
begin printing.
14, 21
→ When "Use close paper size" is enabled, printing will take place
using a size of paper that is close to the size of the print image.
–
–
Simultaneous use of two or more application software
programs.
Printing is slow.
→ Start printing after quitting all unused application software
programs.
The paper is loaded so that printing takes place on the
front side of the paper.
→ Some paper types have a front and back side. If the paper is
loaded so that printing takes place on the back side, toner will not
adhere well to the paper and a good image will not be obtained.
The printed image is light and
uneven.
14
56
TROUBLESHOOTING
Page
Problem
Cause and solution
You are using paper that is outside the specified size and
weight range.
13
→ Use copy paper within the specified range.
Paper curled or damp.
→ Do not use curled or crimped paper. Replace with dry copy paper.
During periods when the machine is not used for a long time,
remove the paper from the tray and store it in a dark place in a
bag to prevent moisture absorption.
–
The printed image is dirty.
You did not set sufficient margins in the paper settings of
your application.
→ The top and bottom of the paper may be dirty if the margins are
set outside of the specified print quality area.
→ Set the margins in the software application within the specified
print quality area.
–
–
The paper size is not loaded in the tray the same as that
specified in the printer driver.
→ Check if the [Paper Size] options suit the size of the paper loaded
in the tray.
→ If the "Fit To Page" setting is activated, make sure that the paper
size selected from the drop-down list of the "Fit To Paper Size"
option is the same as the size of the loaded paper.
The orientation of document setting is not correct.
→ Click the "Paper" tab in the printer driver setup screen, and verify
if the "Image Orientation" option is set to your requirements.
The printed image is skewed or it
runs off the paper.
–
Paper is not loaded properly.
→ Make sure the paper is properly loaded.
14
You did not correctly specify the margins for the
application in use.
→ Check the layout of the document margins and the paper size
settings for the application you are using. Also check if the print
settings are specified correctly to suit the paper size.
–
6
57
TROUBLESHOOTING
Problem
Cause and solution
Page
The printer driver settings are not appropriate for both
the paper and the print job.
→ "Draft", "Normal" or "Photo" can be selected for the print quality in
the "Advanced" tab of the printer driver setup screen. When
"Photo" is selected, you can click the "Image Adjustment" button
and adjust the brightness and contrast in the dialog box that
appears. Adjust these settings appropriately for your print data
and try printing again.
–
Lines in tables are not aligned
correctly and gaps appear.
Your machine is not selected correctly in the current
application for the print job.
→ When choosing "Print" from the "File" menu located in
applications, be sure you have selected "SHARP AR-XXXX"
(where XXXX is the model name of your machine) printer
displayed in the "Print" dialog box.
–
Any of the alarm indicator
See "INDICATORS AND DISPLAY MESSAGES" to check
the meaning of the alarm indicator and error message in
the display, and take appropriate action.
(
,
,
,
,
) is lit or
62
blinking.
58
TROUBLESHOOTING
Page
Problem
Cause and solution
The document glass or the underside of the document
cover/SPF/RSPF is dirty.
→ Clean regularly.
72
–
Original smudged or blotchy.
→ Use a clean original.
You have not specified a suitable resolution.
→ Make sure that the resolution setting in the scanner driver is
appropriate for the original.
–
You are scanning a large area (for example an entire 11" x
17") at high resolution.
→ If you attempt to scan a large area at high resolution and there is
insufficient memory in the machine to hold the scanned data,
scanning will take place at a lower resolution and the scanner
driver will enhance the data to make up for the lower resolution.
However, the quality of the enhanced image will not be as high as
if scanning took place at the higher resolution. Use a lower
resolution setting, or scan a smaller area.
–
You have not specified a suitable value for the "B/W
Threshold" setting.
→ If you are scanning with a TWAIN-compliant application and are
using "White", "Red", "Green" or "Blue" mode from "Light Source"
menu, make sure that a suitable value is specified for the "B/W
Threshold" setting. A larger threshold value makes your output
darker, while a small threshold value makes it lighter. To adjust
the threshold automatically, click the "Auto Threshold" button on
the "Image" tab of the "Custom Settings" screen.
–
Poor scanning quality.
The brightness and contrast settings are not suitable.
→ If you are scanning with a TWAIN-compliant application and the
resulting image has unsuitable brightness or contrast (for
example it is too bright), click the "Auto Brightness/Contrast
Adjustment" button on the "Color" tab of the "Custom Settings"
screen. Click the "Brightness/Contrast" button to adjust the
brightness and the contrast while viewing the scanned output
image on the screen. If you are scanning with a WIA-compliant
application or the "Scanner and Camera Wizard", click "Adjust
the quality of the scanned picture" or the "Custom settings"
button, and adjust the brightness and contrast in the screen that
appears.
–
6
The original is not placed face up in the SPF/RSPF or face
down on the original table.
→ Place the original face up in the SPF/RSPF or face down on the
original table.
18, 19
18, 19
The original was not placed in the correct position.
→ Place the original correctly.
"Quick Scan" has been selected.
→ If scanning is performed when the "Quick Scan" option has been
selected, image quality may be degraded. This is because the
scanned data is transferred using JPEG compression. If image
quality is poor, then perform scanning again without selecting the
"Quick Scan" option. ("Quick Scan" is not selected by default.)
–
59
TROUBLESHOOTING
Problem
Cause and solution
Page
If scanning is not possible, shut down your computer,
turn off the machine’s power switch, and unplug the
machine’s power cord. Next, start your computer, restore
power to the machine, and try scanning again. If scanning
is still not possible, check the following items.
–
Your application is not TWAIN/WIA compliant.
→ If your application is not TWAIN/WIA compliant, scanning will not
be possible. Make sure your application is TWAIN/WIA
compliant.
–
–
You have not selected the scanner driver of the machine
in your application.
→ Make sure that the machine’s scanner driver is selected in your
TWAIN/WIA-compliant application.
You have not specified all scanning preferences
appropriately.
Unable to scan the image.
→ Scanning a large area in full color at high resolution results in a
large amount of data and extended scanning times. The scanning
preferences should be set appropriately for type of original to be
scanned, i.e., Text, Text/Graphics, Photograph, Color, or Black &
White.
–
–
There is not enough computer memory.
→ The scan resolution will vary depending on the scanning area and
how much memory in the machine is free. To can a 11" x 17"
original in full color at 600 dpi without using enhancement, the
dual function board and the 256 MB optional memory (AR-SM5)
are required.
You do not have Administrator rights.
→ To use the machine to scan into Windows 2000/XP, you must log
on as an Administrator.
–
Your computer does not meet the system requirements
for the USB 2.0 interface (Hi-Speed mode).
→ See "System requirements for USB 2.0 (Hi-Speed mode)" (p.38)
to configure your system as required for USB 2.0, and then set
"USB 2.0 mode switching" in the user programs to "Hi-Speed".
Scanner transfer speed is slow
38, 46
60
TROUBLESHOOTING
Notice page printed
If you find that a notice page has been printed at the end of a print job, the print data received from the computer has
not been printed as specified. Fix the problem as explained below and then try printing again.
What to do when a notice page is printed, 1
What to do when a notice page is printed, 2
****************************************************
Notice Page
****************************************************
****************************************************
Notice Page
****************************************************
The IMC memory full error had occurred,
a normal output was not able to be executed.
The incorrect driver is chosen, a normal
output was not able to be excuted.
Please install the appropriate driver.
Please refer to the operation manual for
the solution method.
Please refer to the operation manual for
the solution method.
The above notice page is printed if you attempt to print
using the print driver for the dual function board when
the dual function board is not installed. Change to the
standard print driver and print again. If the standard
print driver is not installed, install as explained in the
Software Setup Guide.
The above notice page is printed when a print job
containing more data than can be held in the memory
of the dual function board is sent to the machine. To fix
the problem, disable the ROPM function. If you need to
use the ROPM function, set the print quality in the
printer driver to "Draft", or increase the amount of
memory on the dual function board.
The IMC memory is used to temporarily hold
Note
print data when the ROPM function is used.
This memory is also used to temporarily hold
the original image during copying. The
proportion of IMC memory allocated to the
printer function can be changed in the user
programs of copy mode. See the user
program "Memory allocated to printer mode".
(p.46) It is also possible to expand memory by
adding on a commercially available memory
module. For more information on expansion
memory, contact a SHARP service center.
Removing the software
If you need to remove the software, follow these steps.
6
Click the "start" button, and then click
1
"Control Panel".
On Windows 95/98/Me/NT 4.0/2000, click the
"Start" button, select "Settings", and then click
"Control Panel".
Click "Add or Remove Programs".
2
On Windows 95/98/Me/NT 4.0/2000, double-click
the "Add/Remove Programs" icon.
Select the printer/scanner driver for
the machine and Button Manager from
the list, and remove the software.
3
For more information, refer to your operating
manual or to the help files for your operating
system.
61
INDICATORS AND DISPLAY
MESSAGES
If one of the following indicators lights up or one of the following messages appears in the display, check the
meaning of the indicator or message in the following table and take appropriate action.
Developer replacement required indicator
Toner cartridge replacement required indicator
Maintenance
indicator
Display
Paper required
indicator
Misfeed indicator
Indication
Cause and solution
Page
Maintenance
indicator
Steadily Service by an authorized SHARP service technician is
–
lit
required.
Developer
replacement
required indicator
Steadily Developer is required. Contact your SHARP service center
lit as soon as possible.
–
Steadily Replacement of toner cartridge will be needed soon.
lit Prepare a new cartridge.
Toner cartridge
replacement
–
required indicator
Blinking Toner cartridge must be replaced. Replace it with a new one.
70
The tray is out of paper. Load paper. It is also possible that
the tray is not inserted completely into the machine. Make
sure it is inserted correctly.
Paper required
indicator
Steadily
14
63
36
lit
A paper misfeed has occurred. Remove the misfeed as
Blinking
Misfeed indicator
ORIGINAL SIZE indicator
PAPER SIZE indicator
explained in "MISFEED REMOVAL".
If the ORIGINAL SIZE indicator blinks when margin shift is
Blinking selected, rotate the original so that it is in the same
orientation as the blinking ORIGINAL SIZE indicator.
There is no appropriate paper. Load appropriate paper in a
Blinking
13
–
� � �
p
Steadily The front cover or the side cover is open. Close the front
lit
cover or the side cover.
[CH] appears in display
in the display
The toner cartridge is not installed correctly. Reinstall the toner
Blinking cartridge. If [CH] still blinks in the display after reinstalling the
toner cartridge, contact a SHARP service center.
70
Write down the code that appears and then unplug the
Letters and numbers appear
power cord and contact your dealer. Tell your dealer what
code appeared and the circumstances under which it
appeared.
–
Data is being held in memory. Print the data or clear it from
memory.
"FUL" appears in the display
33, 35
When "Use close paper size" is
disabled
The PAPER SIZE indicator on the operation panel will blink.
ORIGINAL
SIZE
PAPER
SIZE
You can press the [TRAY SELECT] key ( ) to select a tray Online
11X17
manually, or load paper in the bypass tray and press the
[ON LINE] key ( ) to begin printing.
manual
8½
8½
8½
8½
X
14
11
5½
11
X
X
X
EXTRA
Misfeed location indicator lights up at
the optional 2 x 250-sheet/250-sheet
paper feed unit
The lower side cover of the 2 x 250-sheet/250-sheet paper
feed unit is open. Close the lower side cover.
–
62
MISFEED REMOVAL
When a misfeed occurs, the misfeed indicator ( ) and a misfeed location indicator ( ) will blink and the machine
will automatically stop.
Check the blinking misfeed location indicator to identify the location of the misfeed and remove it.
The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the
machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the
Note
surface of the drum will cause dirty copies.
AR-M205
AR-M160
(p.63)
(p.64)
(p.63)
(p.64)
(p.68)
(p.69)
(p.68)
MISFEED IN THE SPF/RSPF
Remove the misfed original.
1
Section B
Open the SPF/RSPF and rotate the two release
rollers in the direction of the arrow to feed the
original out. Close the SPF/RSPF and then
remove the original.
Check sections A, B, and
C in the left shows the
illustration (see the next
page), and remove the
misfed original.
Roller
6
Section A
Open the feeding roller cover and remove the
misfed original from the document feeder tray.
Close the feeding roller cover.
Feeding roller cover
If a small original (5-1/2" x 8-1/2", etc.) is misfed,
or if an original misfeed occurs in the reversing
tray of the RSPF (if installed), open the right
side cover and remove the original. Close the
right side cover.
Right side cover
63
TROUBLESHOOTING
Section C
Open and close the SPF/RSPF to
make the misfeed location indicator
stop blinking.
2
3
Remove the misfed original from the exit area.
You can also make the
misfeed indicator stop
blinking by opening and
closing the feeding roller
cover or the right side
cover.
If the misfed original cannot be easily removed
from the exit area, open the moveable part of the
document feeder tray and remove the original.
Return the originals indicated by the
minus number in the display to the
document feeder tray and press the
[START] key ( ).
Copying will resume from the originals that still
remained when the misfeed occurred.
If an RSPF is installed, remove the reversing
tray and then remove the original.
After removing a misfed original from the
Note
exit area, be sure to attach the reversing
tray securely to the exit area (when the
RSPF is installed).
MISFEED IN THE BYPASS TRAY
Gently pull the misfed paper out.
Open and close the side cover.
1
2
The misfeed indicator
) will go out.
(
• When closing the side cover, press down
on the handle.
Note
• If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
64
TROUBLESHOOTING
MISFEED IN THE MACHINE
Open the bypass tray and the side
cover.
Check the misfeed location. Remove
the misfed paper following the
instructions for each location in the
illustration below.
1
2
If paper is misfed here, go to "B.
Misfeed in the fusing area".
If the misfed paper is visible side
here, go to "C. Misfeed in the
transport area".
If paper is misfed here, go to "A.
Misfeed in the paper feed area".
A. Misfeed in the paper feed area
Push gently on both ends of the front
cover .
Close the front cover and side cover.
1
3
The misfeed indicator
(
) will go out.
6
• When closing the front cover, press on both
ends.
• When closing the side cover, press on the
handle.
Carefully remove the misfed paper.
2
Note
Turn the roller rotating knob in the
direction of the arrow to assist in
removing it.
• If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
Be careful not to tear the
misfed paper during
removal.
Roller rotating knob
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
Warning
Caution
Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
65
TROUBLESHOOTING
B. Misfeed in the fusing area
Push gently on both ends of the front
cover.
Lift the fusing unit release lever.
1
4
5
Close the front cover and side cover.
Turn the roller rotating knob in the
direction of the arrow.
2
The misfeed indicator
Roller rotating knob
(
) will go out.
• When closing the front cover, press on both
ends.
• When closing the side cover, press on the
handle.
Carefully remove the misfed paper.
3
Note
Lower the fusing unit release levers to
allow easier removal. Return the
release levers to their operating
positions.
• If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
Be careful not to tear the
misfed paper during
removal.
Fusing unit
release lever
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
Warning
Caution
• Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
• Be careful about unfixed toner on the
misfed paper not to soil your hands or
clothes.
66
TROUBLESHOOTING
C. Misfeed in the transport area
Open the fusing paper guide by
1
pressing down the projection on
either side of the guide and remove
the misfed paper.
Be careful not to tear the
misfed paper during
removal.
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
Warning
paper. Doing so may cause a burn or
injury.
If the misfed paper cannot be removed
2
by the previous step but is visible in
the paper output area, remove the
paper by pulling it into the paper
output area.
Be careful not to tear the
misfed paper during
removal.
6
Close the side cover.
3
The misfeed indicator
(
) will go out.
• When closing the side cover, press on the
handle.
Note
• If the paper was torn, make sure that no
torn pieces remain in the machine.
• If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
67
TROUBLESHOOTING
MISFEED IN THE UPPER PAPER TRAY
Note
Make sure that there is no misfed paper in the tray before pulling it out. (p.65)
Lift and pull out the upper paper tray
and remove the misfed paper.
1
Be careful not to tear the
misfed paper during
removal.
Open and close the side cover.
2
The misfeed indicator
(
) will go out.
• When closing the side cover, press on the
handle.
Note
• If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
Close the upper paper tray.
3
Push the upper paper
tray in completely.
68
TROUBLESHOOTING
MISFEED IN THE LOWER PAPER TRAY (AR-M205 only)
• Make sure that there is no misfed paper in the tray before pulling it out. (p.65)
• Use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit/2 x 250-sheet paper
feed unit.
Note
Open the lower side cover.
Close the lower paper tray.
1
2
3
5
Grasp the handle to open
the lower side cover.
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
If the misfed paper is not seen in step
2, lift and pull out the lower paper tray
and remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
6
Close the lower side cover.
4
The misfeed indicator
(
) will go out.
If the misfeed indicator (
blinking, check for torn pieces of paper in the
machine.
) does not stop
Note
69
REPLACING THE TONER CARTRIDGE
When the toner cartridge replacement required indicator (
) lights up, the toner cartridge will need replacement
soon. Obtain a new cartridge. When the toner cartridge replacement required indicator (
cartridge must be replaced before copying can be resumed.
) blinks, the toner
Replace the toner cartridge by following the procedure below.
Note
When the toner cartridge replacement indicator (
) blinks, little toner remains and thus copies may be faint.
Push on both ends of the front cover
and open it.
Insert the toner cartridge along the
guides until it locks in place while
pushing the lock release lever.
1
2
4
If there is any dirt or dust
on the toner cartridge,
remove it before
installing the cartridge.
Pull the toner cartridge out while
pressing the lock release lever.
Remove the tape from the shutter. Pull
the shutter out of the toner cartridge.
5
Toner cartridge
lock release lever
Discard the shutter.
After removing the toner cartridge, do not
shake it or tap on it. Doing so may cause
Close the front cover.
Caution
6
toner to leak from the cartridge. Put the old
cartridge immediately in the bag contained in
the box of the new cartridge. Dispose of the
old toner cartridge in accordance with local
regulations.
The toner cartridge
replacement required
indicator (
out.
) will go
Remove the new toner cartridge from
the bag. Grasp the cartridge on both
sides and shake it horizontally four or
five times. After shaking the cartridge,
remove the tape.
3
• Even after a new toner cartridge is installed,
the toner cartridge replacement required
Note
indicator (
) may still light up, indicating
that copying cannot be resumed (toner is
not fed sufficiently). In this case, open and
close the front cover. The machine will feed
toner again for about two minutes and then
copying can be resumed.
4 or 5 times
Shutter
• Before closing the front cover, make sure
that the toner cartridge is correctly installed.
• When closing the front cover, press on both
ends.
tape
• Grasp the grip when holding the cartridge.
Do not hold the cartridge by the shutter.
• Be sure to shake the cartridge only before
the tape is removed.
Caution
70
Chapter 7
ROUTINE MAINTENANCE
7
This chapter explains how to keep the machine operating smoothly, including viewing copy count, and scan count,
the toner level indicator, and cleaning the machine.
CHECKING THE TOTAL OUTPUT
COUNT AND TONER LEVEL
CHECKING THE TOTAL OUTPUT COUNT
From the "0" display, you can check the total output count, total copy count, and total scan count as explained
below.
The total output count is all pages (for both printing and copying) printed by the machine. The total count, copy
count, total scan count, and copy count for each account (if enabled) are reset to 0 when the count reaches 50,000.
[Total output count]
[Total copy count]
Hold down the [0] key.
Hold down the [READ-END] key ( ).
The total output count
appears in the display
while you hold down the
key.
The total copy count
appears in the display
while you hold down the
key.
The total output count
appears sequentially in
two parts while you hold
down the [0] key.
The count display and
counting method are the
same as for the total
READ-END
REAEND
output count.
Example: Total number of pages output is 12,345.
The total number of pages printed in printer
mode can be calculated by subtracting the
Note
total copy count from the total output count.
[Total scan count]
Hold down the [ ] key.
• Each 11" x 17" size page is counted as two
pages.
Note
The total scan count
appears in the display
while you hold down the
key.
• During a copy run, pressing the [0] key
shows the number of completed copy
pages, not the total output count.
The count display and
counting method are the
same as for the total
READ-END
output count.
71
ROUTINE MAINTENANCE
CHECKING THE TONER LEVEL
The toner level is indicated by a 6-level display. Use it as a guideline for replacing the toner cartridge.
Hold down the [Light] key ( ) until
Hold down the [Copy ratio display] key
1
2
the alarm indicators ( ,
blink.
,
,
,
)
(
) for more than 5 seconds.
The approximate quantity
of toner remaining will be
indicated in the display
as a percentage. ("100",
"75", "50", "25", "10" is
displayed.) When the
percentage is less than
10%, "LO" will be
The display will show
"- -".
ZOOM
1 3 5
displayed.
Press the [Light] key ( ) to return to
the normal display.
3
The alarm indicators (
,
,
,
,
) go off.
The display returns to the number of copies
display.
ROUTINE MAINTENANCE
CLEANING THE DOCUMENT GLASS AND
SPF/RSPF/DOCUMENT COVER
If the document glass, SPF/RSPF, underside of the document cover, or the scanner for originals coming from the
SPF/RSPF (the long narrow glass surface on the right side of the document glass) become dirty, the dirt may appear
on copies. Always keep these parts clean.
Stains or dirt on the document glass/SPF/RSPF will also be copied. Wipe the document glass, document cover
portion of the SPF/RSPF and the scanning window on the document glass with a soft, clean cloth.
If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents.
Do not spray flammable cleaner gas.
Warning
72
ROUTINE MAINTENANCE
CLEANING THE BYPASS TRAY PAPER FEED
ROLLER
If misfeeds occur frequently when feeding envelopes, thick paper, etc. through the bypass tray, wipe the paper feed
roller at the feed slot of the bypass tray with a soft, clean cloth dampened with alcohol or water.
Paper feed roller
CLEANING THE TRANSFER CHARGER
If copies start becoming streaky or blotchy, the transfer charger may be dirty.
Clean the charger using the following procedure.
Turn the power switch off.
Set the charger cleaner onto the
transfer charger and gently slide the
cleaner in the direction indicated by
the arrow two or three times.
1
2
5
Open the bypass tray and the side
cover.
If the white sheet metal is
smudged with toner,
wipe it with a soft, clean
cloth.
Slide the charger cleaner from one end to the
other end along the groove of the transfer
Note
Lift and pull out the upper paper tray.
3
4
charger. If the cleaner is stopped on the way,
smudges on copies may occur.
Return the charger cleaner to its
original position. Close the upper
paper tray. Close the side cover by
pressing the handle on the cover.
6
7
7
Turn the power switch on.
Take the charger cleaner out by
holding the tab.
Charger
cleaner
73
Chapter 8
PERIPHERAL DEVICES AND SUPPLIES
8
PERIPHERAL DEVICES
Optional equipment and supplies are explained in this chapter. To purchase optional equipment and supplies,
contact SHARP service.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are nominal
Note
values of production units. There may be some deviations from these values in individual units.
Option that can be installed
on the AR-M205
Option that can be installed
on the AR-M160
AR-M205
AR-M160
Reversing single
pass feeder
(AR-RP6)
Single pass feeder
(AR-SP6)
Platen cover
(AR-VR5)
Options that can be installed on both models
Dual function board (AR-EB7)
256 MB optional memory (AR-SM5)
250-sheet paper feed unit
(AR-D24)
2 x 250-sheet paper feed unit
(AR-D25)
74
PERIPHERAL DEVICES AND SUPPLIES
SINGLE PASS FEEDER/
REVERSING SINGLE PASS FEEDER
For the names of the parts of the SPF/RSPF, see "PART NAMES AND FUNCTIONS". (p.8)
Specifications
AR-SP6
AR-RP6
Weight
Size
15 lbs. to 24 lbs. (56 g/m2 to 90 g/m2)
Acceptable
original
5-1/2" x 8-1/2" to 11" x 17"
Capacity
Up to 40 sheets (Thickness 5/32" (4mm) and below)
5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17"
Detectable original sizes
Weight
11.1 lbs. (5.0 kg)
12.0 lbs. (5.4 kg)
22-61/64" (W) x 17-9/64" (D) x 5-1/4" (H)
(583 mm (W) x 435 mm (D) x 133 mm (H))
Dimensions
250-SHEET PAPER FEED UNIT/
2 X 250-SHEET PAPER FEED UNIT
These paper feed units provide the convenience of increased paper capacity for the copier and a greater choice of
paper sizes readily available for copying.
The AR-D24 contains one 250-sheet paper tray and the AR-D25 contains two 250-sheet paper trays.
Part names
250-sheet paper feed unit
2 x 250-sheet paper feed unit
AR-D24
AR-D25
Side cover
Side cover
Tray
Trays
Specifications
AR-D24
AR-D25
8
Paper size
8-1/2" x 11" to 11" x 17"
One tray with capacity for 250 sheets of
Two trays with capacity for 250 sheets of
Paper capacity
24 lbs. (90 g/m2) bond paper
24 lbs. (90 g/m2) bond paper
Paper weight
Power supply
15 lbs. to 24 lbs. (56 g/m2 to 90 g/m2)
Drawn from the machine
23-15/64" (W) x16-27/64" (D) x 3-15/32" (H)
23-15/64" (W) x16-27/64" (D) x 6-27/32" (H)
(590 mm (W) x 471 mm (D) x 173.5 mm (H))
Dimensions
Weight
(590 mm (W) x 471 mm (D) x 88 mm (H))
10.4 lbs. (4.7 kg)
20.1 lbs. (9.1 kg)
75
PERIPHERAL DEVICES AND SUPPLIES
DUAL FUNCTION BOARD
A dual function board can be installed to add a variety of copy functions and enable use of the printer driver for the
dual function board, which features a faster printing speed than the standard printer driver. For copy functions that
can be used, see "Convenient Copy Functions". (p.32)
Specification
AR-EB7
Sort copy, group copy, 2 IN 1 / 4 IN 1 copying, rotation copy,
border erase copying, center erase copying, margin copying, USB 2.0 port
Added functions
printer function for the dual function board, ROPM function, High-speed data
transfer (when connected to a USB 2.0 port)
Electronic sort
JBIG
compression method
Electronic sort
16 MB
memory
Electronic sort
100 standard 8-1/2" x 11" originals
scannable pages
STORAGE OF SUPPLIES
Standard supplies for this product that are to be replace by the user are paper and toner cartridge.
For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered
and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label
on the toner package.
GENUINE SUPPLIES
PROPER STORAGE
● Store the supplies in a location that is:
clean and dry,
at a stable temperature,
not exposed to direct sunlight.
● Store paper in the wrapper and lying flat.
Paper stored out of the wrapper or in packages
standing on end may curl or get damp, resulting in
paper misfeeds.
76
Chapter 9
APPENDIX
9
SPECIFICATIONS
Model
AR-M160
AR-M205
Type
Digital Multifunction System, Desktop
OPC drum
Photoconductive type
Document glass type
Reproduction method
Originals
Fixed
Laser electrostatic reproduction
Sheets, bound documents
Max. 11" x 17"
Originals size
Max. 11" x 17"
Min. 5-1/2" x 8-1/2"
Image loss: Max. 5/32" (4 mm) (leading and trailing edges)
Max. 5/32" (4 mm) (along other edges in total)
Copy size
9 copies/min.
10 copies/min.
12 copies/min.
16 copies/min.
16 copies/min.
(11" x 17")
10 copies/min.
12 copies/min.
15 copies/min.
20 copies/min.
20 copies/min.
(11" x 17")
Copying speed
(one-sided copying at
100% copy ratio)
(8-1/2" x 14")
(8-1/2" x 11"R)
(8-1/2" x 11")
(5-1/2" x 8-1/2")
(8-1/2" x 14")
(8-1/2" x 11"R)
(8-1/2" x 11")
(5-1/2" x 8-1/2")
Continuous copy
First-copy time*
Warm-up time*
Max. 999 copies; subtractive counter
Approx. 7.2 sec.
Approx. 45 sec.
Variable: 25% to 400%, in 1% increments (total 376 steps)
Fixed preset: 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%
Copy ratio
Document cover:Moving optical source, slit exposure (stationary platen) with
automatic exposure function
Exposure system
Paper feed method
SPF/RSPF:
Moving original
One automatic feeding paper tray (250
sheets) + bypass tray (100 sheets)
Two automatic feeding paper trays (250
sheets each) + bypass tray (100 sheets)
Fusing system
Developer system
Light source
Heat rollers
Magnetic brush development
Cold cathode fluorescent lamp
Scan: 600 x 300 dpi Output: 600 x 600 dpi (AUTO/TEXT mode)
Scan: 600 x 600 dpi Output: 600 x 600 dpi (PHOTO mode)
Resolution
Gradation
Scanning: 256
Printing: 2 value
Power supply
AC 120V, 60 Hz, 10A
Max. 1.2 kW
Power consumption
Overall dimensions
(with bypass tray folded)
23-15/64" (W) x 20-29/32" (D) (590 mm (W) x 531 mm (D))
Approx. 69.1 lbs. (31.3 kg)
(Not includes toner cartridge)
Approx. 77.4 lbs. (35.1 kg)
(Not includes toner cartridge)
Weight
77
APPENDIX
23-15/64" (W) x 22-23/32" (D) x 18-33/64" (H) 23-15/64" (W) x 22-23/32" (D) x 21-55/64" (H)
(590 mm (W) x 577 mm (D) x 470 mm (H)) (590 mm (W) x 577mm (D) x 555mm (H))
Dimensions
Operating conditions
Temperature: 59°F to 86°F (15°C to 30°C), Humidity: 20% to 85%
Sound Power Level LwA(1B=10dB)
Copying: 6.2[B]
Standby: 3.1[B]
Sound Pressure Level LpA (bystander positions)
Copying: 48[dB(A)]
Noise level
Standby: 16[dB(A)]
Sound Pressure Level LpA (operator position)
Copying: 50[dB(A)]
Standby: 18[dB(A)]
Noise emission measurement in accordance with ISO 7779.
Ozone: 0.02 mg/m3 or less
Emission concentration
(measured according to Dust: 0.075 mg/m3 or less
Styrene: 0.07 mg/m3 or less
RAL-UZ62)
* The first-copy time and warm-up time may vary depending on the power-supply voltage, ambient temperature, and other
operating conditions.
Printer Function
AR-M205 Max. 20ppm / AR-M160 Max. 16 ppm
Print speed
(Dual function board must be installed)
Resolution
Memory
600 dpi
AR-M160: 16 MB, AR-M205: 32MB
SHARP GDI
Emulation
Up to 256 MB can be only added by installing a 256 MB optional memory (AR-SM5)
in one DIMM expansion slot (dual function board must be installed)
Memory expansion
Interface port
IEEE1284 parallel port/
USB port (USB1.1), USB port (USB2.0, dual function board must be installed)
[Parallel cable]
Shielded bi-directional (IEEE1284) cable (max. length 10 feet (3 m))
Please purchase a commercially available parallel cable.
[USB cable (only for connection to USB 1.1 port)]
Shielded twisted pair cable (max. length 10 feet (3 m))
[USB cable (only for connection to USB 2.0 port)]
Shielded twisted pair cable (max. length 10 feet (3 m), must support USB 2.0)
Please purchase a commercially available USB cable.
Interface cables
78
APPENDIX
Scanner Function
Type
Flatbed scanner
Scanning method
Light source
Document glass / SPF/RSPF
Cold cathode fluorescent lamp
Basic: 600 dpi x 600 dpi
Setting range: 50dpi - 9600dpi
Resolution*
Original types
Effective scanning area
Scanning speed
Input Data
Sheet media, books
11-45/64" (297 mm) (Lengthwise) x 16-63/64" (431 mm) (Width)
2.88 msec/line
1 bit or 12 bit
Output Data
1 bit or 8 bit
Scanning colors
Protocol
Black and white 2 value, Grayscale, Full color
TWAIN / WIA (Windows XP only) / STI
USB port (USB 1.1)
USB port (USB 2.0, dual function board must be installed)
Interface port
Drop out color
Yes
Windows98/Me
Supported operating
systems
Windows 2000 Professional/Windows XP Home Edition/Professional
(Detailed information can be found in the Software Setup Guide)
Top and bottom edges 7/64" (2.5 mm) due to scanner driver
Right and left edges 1/8" (3.0 mm)
Void area
[USB cable (only for connection to USB 1.1 port)]
Shielded twisted pair cable (max. length 10 feet (3 m))
[USB cable (only for connection to USB 2.0 port)]
Interface cables
Shielded twisted pair cable (max. length 10 feet (3 m), must support USB 2.0)
Please purchase a commercially available USB cable.
* The resolution may be enhanced by the scanner driver depending on the scanned area and amount of memory installed in the
machine.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
Note
nominal values of production units. There may be some deviations from these values in individual units.
9
79
SOFTWARE LICENSE
PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE. BY USING THE
SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE.
1. License. The application, demonstration, system and other software accompanying this License,
whether on disk, in read only memory, or on any other media (the "Software") and related documentation
are licensed to you by SHARP. You own the disk on which the Software is recorded but SHARP and/or
SHARP's Licensors retain title to the Software and related documentation. This License allows you to use
the Software on one or more computers connected to a single printer and make one copy of the Software
in machine-readable form for backup purposes only. You must reproduce on such copy the SHARP
copyright notice, the copyright notice of SHARP's Licensors and any other proprietary legends of SHARP
and/or its Licensors that were on the original copy of the Software. You may also transfer all your license
rights in the Software, the backup copy of the Software, the related documentation and a copy of this
License to another party, provided the other party reads and agrees to the terms and conditions of this
License.
2. Restrictions. The Software contains copyrighted material, trade secrets and other proprietary material
which is owned by SHARP and/or its Licensors and in order to protect them you may not decompile,
reverse engineer, disassemble or otherwise reduce the Software to a human-perceivable form. You may
not modify, network, rent, lease, loan, distribute or create derivative works based upon the Software in
whole or in part. You may not electronically transmit the Software from one computer to another or over a
network.
3. Termination. This license is effective until terminated. You may terminate this License at any time by
destroying the Software and related documentation and all copies thereof. This License will terminate
immediately without notice from SHARP and/or SHARP's Licensors if you fail to comply with any provision
of this License. Upon termination you must destroy the Software and related documentation and all copies
thereof.
4. Export Law Assurances. You agree and certify that neither the Software nor any other technical data
received from SHARP, nor the direct product thereof, will be exported outside the United States except as
authorized and as permitted by the laws and regulations of the United States. If the Software has been
rightfully obtained by you outside of the United States, you agree that you will not re-export the Software
nor any other technical data received from SHARP, nor the direct product thereof, except as permitted by
the laws and regulations of the United states and the laws and the regulation of the jurisdiction in which
you obtained the Software.
5. Government End Users. If you are acquiring the Software on behalf of any unit or agency of the
United States Government, the following provisions apply. The Government agrees:
(i) if the Software is supplied to the Department of Defense (DoD), the Software is classified as
"Commercial Computer Software" and the Government is acquiring only "restricted rights" in the Software
and its documentation as that term is defined in Clause 252.227-7013 (c)(1) (Oct.,1988) of the DFARS;
and
(ii) if the Software is supplied to any unit or agency of the United States Government other than DoD, the
Government's rights in the Software and its documentation will be as defined in Clause 52.227-19 (c)(2) of
the FAR or, in the case of NASA, in Clause 18-52.227-86 (d) of the NASA Supplement to the FAR.
80
6. Limited Warranty on Media. SHARP warrants the disks on which the Software is recorded to be free
from defects in materials and workmanship under normal use for a period of ninety (90) days from the
date of purchase as evidenced by a copy of the receipt. The entire liability of SHARP and/or its Licensors
and your exclusive remedy will be replacement of the disk which fails to meet the limited warranty
provided by this Clause 6. A disk will be replaced when it is returned to SHARP or a SHARP authorized
representative with a copy of the receipt. SHARP will have no responsibility to replace a disk damaged by
accident, abuse or misapplication.
ANY IMPLIED WARRANTIES ON THE DISKS, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
NINETY (90) DAYS FROM THE DATE OF DELIVERY. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION
TO JURISDICTION.
7. Disclaimer of Warranty on Software. You expressly acknowledge and agree that use of the Software
is at your sole risk. The Software and related documentation are provided "AS IS" and without warranty of
any kind and SHARP and SHARP's Licensor(s) (for the purpose of provisions 7 and 8, SHARP and
SHARP's Licensor(s) shall be collectively referred to as "SHARP") EXPRESSLY DISCLAIM ALL
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SHARP
DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR
ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. FURTHERMORE,
SHARP DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE
RESULTS OF THE USE OF THE SOFTWARE OR RELATED DOCUMENTATION IN TERMS OF THEIR
CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SHARP OR A SHARP AUTHORIZED REPRESENTATIVE
SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT SHARP OR A SHARP
AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION, SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
8. Limitation of Liability. UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE, SHALL SHARP
BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT
FROM THE USE OR INABILITY TO USE THE SOFTWARE OR RELATED DOCUMENTATION, EVEN IF
SHARP OR A SHARP AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION
OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
In no event shall SHARP's total liability to you for all damages, losses, and causes of action (whether in
contract, tort (including negligence) or otherwise) exceed the amount paid by you for the Software.
9. Controlling Law and Severability. For a portion of the Software related with Apple Macintosh and
Microsoft Windows, this license shall be governed by and construed in accordance with the laws of the
state of California and Washington, respectively. If for any reason a court of competent jurisdiction finds
any provision of this License, or portion thereof, to be unenforceable, that provision of the License shall be
enforced to the maximum extent permissible so as to effect the intent of the parties, and the remainder of
this License shall continue in full force and effect.
10. Complete Agreement. This License constitutes the entire agreement between the parties with
respect to the use of the Software and related documentation, and supersedes all prior or
contemporaneous understandings or agreements, written or oral, regarding such subject matter. No
amendment to or modification of this License will be binding unless in writing and signed by a duly
authorized representative of SHARP.
81
Page: 1/4
MATERIAL SAFETY DATA SHEET
Data Issued: Jun. 1. 2003
MSDS No. F-01211
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name : AR-202NT / AR-202T / AR-202ST / AR-202FT /
AR-202ST-C/ AR-203ST-C/ AR-016T/AR-016RT (Black Toner)
Supplier Identification : Sharp Corporation
22-22 Nagaike-cho, Abeno-ku, Osaka, Japan
Local suppliers are listed below. Please contact the nearest supplier for additional information.
Area
(Country)
U.S.A.
(Name and Telephone Number)
Sharp Electronics Corporation
Sharp Plaza, Mahwah, NJ
Telephone number for information
Emergency telephone number
: 1-800-237-4277
: 1-800-255-3924
North
America
Canada
Australia
Germany
Sharp Electronics of Canada Ltd.
Telephone number for information
Emergency telephone number
Sharp Corporation of Australia PTY. Ltd.
No1 Huntingwood Drive Huntingwood Blacktown N.S.W.
: 905-890-2100
: 1-800-255-3924
Oceania
Telephone number for information
: 1300-13-50-22
Sharp Electronics (Europe) GMBH
Sonninstrasse 3, 20097 Hamburg
Telephone number to access MSDS
For more information
: 040-2376-2185
: 040-2376-2613
United
Kingdom
Sharp Electronics (U. K.) Ltd.
Telephone number for information
Sharp Electronics France S.A.
Telephone number for information
Sharp Electronics GMBH
Telephone number for information
Sharp Electronics (Italy) S.P.A.
Telephone number for information
: 08705-274-277
: 01-49-90-34-00
: 01-727-19-0
: 02895951
France
Austria
Italy
Europe
Spain
Sharp Electronics (Espana) S.A.
Telephone number for information
: 93-581-97-00
: 30-6359500
: 08-634-36-00
: 01-846-6111
Netherlands Sharp Electronics Benelux B.V.
Telephone number for information
Sweden
Sharp Electronics Nordic AB
Telephone number for information
Switzerland Sharp Electronics (Schweiz) AG
Telephone number for information
U.A.E.
Sharp Middle East FZE
P.O.Box 17115 Jebel Ali, Dubai
Telephone number for information
Middle
East
: 04-815311
2. COMPOSITION/INFORMATION ON INGREDIENTS
Substance[ ]
Preparation[X]
Ingredient
CAS No.
Proportion OSHA PEL ACGIH TLV MAK-TWA NOHSC-TWA
Styrene-Acrylate
copolymer
29497-14-1
85-95%
Not listed
Not listed
Not listed
Not listed
Carbon black
Iron oxide
Metal Complex dye*
1333-86-4
1309-38-2
109125-51-1
84179-66-8
5-10%
1-5%
< 2%
3.5mg/m3
Not listed
0.5mg/m3
3.5mg/m3
Not listed
0.5mg/m3
Not listed
Not listed
Not listed
3mg/m3
Not listed
Not listed
* EC N0. : 400-110-2, Symbol letter : F, R Phrase : R11
82
Page: 2/4
MATERIAL SAFETY DATA SHEET
Data Issued: Jun. 1. 2003
MSDS No. F-01211
3. HAZARDS IDENTIFICATION
Most Important Hazards and Effects of the Products
Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests
performed using toner. When used as intended according to instructions, studies do
not indicate any symptoms of fibrosis will occur.
Environmental Effects : No data are available.
Specific Hazards
: Dust explosion (like most finely divided organic powders)
Directive 1999/45/EC(Europe): Not classified as dangerous
4. FIRST-AID MEASURES
Route(s) of Entry: Inhalation?
Skin?
Ingestion?
Yes
No
Possible but very unusual.
Inhalation
: Remove to fresh air. If symptoms occur, consult medical personnel.
Skin Contact: Wash with soap and water for 15 minutes or until particle is removed.
If irritation does occur, consult medical personnel.
Eye Contact : Flush eyes immediately with water for 15 minutes. If irritation does occur, consult medical
personnel.
Ingestion
: Rinse with water and drink several glasses of water . If irritation or discomfort does occur, consult
medical personnel.
5. FIRE –FIGHTING MEASURES
Extinguishing Media
: Water, CO2, foam and dry chemicals
Special Fire fighting Procedures : None
Fire and Explosion Hazards : Toner material, like most finely divided organic powders, may form an
explosive mixture.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
: None
Environmental Precautions
Methods for Cleaning Up
: None
: Wipe off with paper or cloth. Do not use vacuum cleaner when a large
amount is released. It, like most finely divided organic powders, is capable of
creating a dust explosion.
7. HANDLING AND STORAGE
Handling
Technical Measures : None
Precautions
: None
Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity of toner or during
long term exposure, as with any non-toxic dust. Try not to disperse the particles.
Storage
Technical Measures : None
Storage Conditions : Keep container closed and Store in a cool and dry place.
Keep out of the reach of children.
Incompatible Products: None
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures
Ventilation
: Not required under intended use.
83
Page: 3/4
MATERIAL SAFETY DATA SHEET
Data Issued: Jun. 1. 2003
MSDS No. F-01211
Exposure limit values
OSHA-PEL (USA)
ACGIH-TLV (USA)
: 15mg/m3 (Total Dust) , 5mg/m3 (Respirable Dust)
: 10mg/m3 (Total Dust) , 3mg/m3 (Respirable Dust)
Personal Protective Equipment
Respiratory Protection
Hand Protection
: Not required under intended use.
: Not required under intended use.
Eye Protection
: Not required under intended use.
Skin Protection
: Not required under intended use.
Other Protective Equipment
: Use of a dust mask and goggles are recommended when handling a large
quantity of toner or during long term exposure, as with any non-toxic dust.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical State:Solid
Ph
Boiling/Melting Point
Softening Point (°C)
Flash Point (°C )
Ignition Point (°C )
Explosion Properties
Density (g/cm3)
Form: Powder
Color:Black
Odor:odorless
: Not applicable
: Not applicable
: 100 - 130
: Not applicable
: > 350
: No data
: 1.1 (bulk density : 0.35)
: Negligible
Solubility in water
10. STABILITY AND REACTIVITY
Stability
: Stable
Hazardous Reactions
Conditions to Avoid
Materials to Avoid
: Dust explosion, like most finely divided organic powders.
: Electric discharge, throwing into fire.
: Oxidizing materials
Hazardous Decomposition Products : CO, CO2 and NOX
Further Information
: None
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Ingestion (oral)
Inhalation
: LD50 > 2000mg/kg (Rats)
: LC50 > 4.97mg/L
Eye irritation
: Not an irritant (Rabbits)
Skin irritation
Skin sensitizer
Mutagenicity
Carcinogenicity
: Not an irritant (Rabbits)
: No sensitization
: Negative (Ames Test)
: In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human
carcinogen). This classification is given to chemicals for which there is inadequate
human evidence, but sufficient animal evidence on which to base an opinion of
carcinogenicity. The classification is based upon the development of lung tumors in rats
receiving chronic inhalation exposures to free carbon black at levels that induce particle
overload of the lung. Studies performed in animal models other than rats did not show
any association between carbon black and lung tumors. Moreover, a two-year cancer
bioassay using a typical toner preparation containing carbon black demonstrated no
association between toner exposure and tumor development in rats.
84
Page: 4/4
MATERIAL SAFETY DATA SHEET
Data Issued: Jun. 1. 2003
MSDS No. F-01211
Chronic Effect
: In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate
degree of lung fibrosis was observed in 92% of the rats in the high concentration
(16mg/m3) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of
the animals in the middle (4mg/m3) exposure group, but no pulmonary change was
reported in the lowest (1mg/m3) exposure group, the most relevant level to potential
human exposures.
12. ECOLOGICAL INFORMATION
No data are available.
13. DISPOSAL CONSIDERATIONS
Waste from residues
: Waste material may be dumped or incinerated under conditions which meet all
federal, state and local environmental regulations.
Contaminated Packaging : Waste may be disposed or incinerated under conditions which meet all federal,
state and local environmental regulations.
14. TRANSPORT INFORMATION
UN Classification
: None
Not classified as hazardous for transport.
15. REGULATORY INFORMATION
US Information
TSCA (Toxic Substances Control Act):
All chemical substances in this product comply with all applicable rules or order under TSCA.
SARA (Superfund Amendments and Reauthorization Act) Title III
302 Extreme Hazardous Substance: None
311/312 Hazard Classification
EU Information
: None
1999/45/EC and 67/548/EEC
Symbol & Indication
R-Phrase
: Not required
: Not required
76/769/EEC
: All chemical substances in this product comply with all applicable rules
or order under 76/769/EEC.
16. OTHER INFORMATION
NFPA Rating (USA)
: Health=1 Flammability=1 Reactivity=0
WHMIS Legislation (Canada) : This product is not a controlled product.
List of R phrases
References
: R11 : Highly flammable
IARC (1996) : IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol.
65, Printing Process And Printing Inks, Carbon Black and Some Nitro Compounds, Lyon,
pp.149-261
H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow,
U.Mohr, S.Takenaka, and R.Mermelstein (1991) Pulmonary Response to Toner upon Chronic Inhalation
Exposure in Rats.
Fundamental and Applied Toxicology 17, pp.280-299.
The information on this data sheet represents our current data and best opinion as to the proper use in handling
of this product under normal conditions. However, all materials may present unknown hazards and should be
used with caution. Although certain hazards are described herein, we do not guarantee that these are the only
hazards which exist.
85
Page: 1/4
MATERIAL SAFETY DATA SHEET
Data Issued: Jun. 1. 2003
MSDS No. F-01211
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name : AR-202ND / AR-202DV / AR-202SD / AR-202SD-C (Black Developer)
Supplier Identification : Sharp Corporation
22-22 Nagaike-cho, Abeno-ku, Osaka, Japan
Local suppliers are listed below. Please contact the nearest supplier for additional information.
Area
(Country)
U.S.A.
(Name and Telephone Number)
Sharp Electronics Corporation
Sharp Plaza, Mahwah, NJ
Telephone number for information
Emergency telephone number
: 1-800-237-4277
: 1-800-255-3924
North
America
Canada
Australia
Germany
Sharp Electronics of Canada Ltd.
Telephone number for information
Emergency telephone number
Sharp Corporation of Australia PTY. Ltd.
No1 Huntingwood Drive Huntingwood Blacktown N.S.W.
: 905-890-2100
: 1-800-255-3924
Oceania
Telephone number for information
: 1300-13-50-22
Sharp Electronics (Europe) GMBH
Sonninstrasse 3, 20097 Hamburg
Telephone number to access MSDS
For more information
: 040-2376-2185
: 040-2376-2613
United
Kingdom
Sharp Electronics (U. K.) Ltd.
Telephone number for information
Sharp Electronics France S.A.
Telephone number for information
Sharp Electronics GMBH
Telephone number for information
Sharp Electronics (Italy) S.P.A.
Telephone number for information
: 08705-274-277
: 01-49-90-34-00
: 01-727-19-0
: 02895951
France
Austria
Italy
Europe
Spain
Sharp Electronics (Espana) S.A.
Telephone number for information
: 93-581-97-00
: 30-6359500
: 08-634-36-00
: 01-846-6111
Netherlands Sharp Electronics Benelux B.V.
Telephone number for information
Sweden
Sharp Electronics Nordic AB
Telephone number for information
Switzerland Sharp Electronics (Schweiz) AG
Telephone number for information
U.A.E.
Sharp Middle East FZE
P.O.Box 17115 Jebel Ali, Dubai
Telephone number for information
Middle
East
: 04-815311
2. COMPOSITION/INFORMATION ON INGREDIENTS
Substance[ ]
Preparation[X]
Ingredient
Iron powder
Styrene-Acrylate
copolymer
CAS No.
7439-89-6
29497-14-1
Proportion OSHA PEL ACGIH TLV MAK-TWA NOHSC-TWA
> 90%
5-10%
Not listed
Not listed
Not listed
Not listed
Not listed
Not listed
Not listed
Not listed
Carbon black
1333-86-4
< 1%
3.5mg/m3
3.5mg/m3
Not listed
3mg/m3
86
Page: 2/4
MATERIAL SAFETY DATA SHEET
Data Issued: Jun. 1. 2003
MSDS No. F-31211
3. HAZARDS IDENTIFICATION
Most Important Hazards and Effects of the Products
Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests
performed using toner. When used as intended according to instructions, studies do
not indicate any symptoms of fibrosis will occur.
Environmental Effects : No data are available.
Specific Hazards
: Dust explosion (like most finely divided organic powders)
Directive 1999/45/EC(Europe): Not classified as dangerous
4. FIRST-AID MEASURES
Route(s) of Entry: Inhalation?
Skin?
Ingestion?
Yes
No
Possible but very unusual.
Inhalation
: Remove to fresh air. If symptoms occur, consult medical personnel.
Skin Contact: Wash with soap and water for 15 minutes or until particle is removed.
If irritation does occur, consult medical personnel.
Eye Contact : Flush eyes immediately with water for 15 minutes. If irritation does occur, consult medical
personnel.
Ingestion
: Rinse with water and drink several glasses of water . If irritation or discomfort does occur, consult
medical personnel.
5. FIRE –FIGHTING MEASURES
Extinguishing Media
: Water, CO2, foam and dry chemicals
Special Fire fighting Procedures : None
Fire and Explosion Hazards : Toner material, like most finely divided organic powders, may form an
explosive mixture.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
: None
Environmental Precautions
Methods for Cleaning Up
: None
: Wipe off with paper or cloth. Do not use vacuum cleaner when a large
amount is released. It, like most finely divided organic powders, is capable of
creating a dust explosion.
7. HANDLING AND STORAGE
Handling
Technical Measures : None
Precautions
: None
Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity of toner or during
long term exposure, as with any non-toxic dust. Try not to disperse the particles.
Storage
Technical Measures : None
Storage Conditions : Keep container closed and Store in a cool and dry place.
Keep out of the reach of children.
Incompatible Products: None
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures
Ventilation
: Not required under intended use.
87
Page: 3/4
MATERIAL SAFETY DATA SHEET
Data Issued: Jun. 1. 2003
MSDS No. F-01211
Exposure limit values
OSHA-PEL (USA)
ACGIH-TLV (USA)
: 15mg/m3 (Total Dust) , 5mg/m3 (Respirable Dust)
: 10mg/m3 (Total Dust) , 3mg/m3 (Respirable Dust)
Personal Protective Equipment
Respiratory Protection
Hand Protection
: Not required under intended use.
: Not required under intended use.
Eye Protection
: Not required under intended use.
Skin Protection
: Not required under intended use.
Other Protective Equipment
: Use of a dust mask and goggles are recommended when handling a large
quantity of toner or during long term exposure, as with any non-toxic dust.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical State:Solid
Ph
Boiling/Melting Point
Flash Point (°C )
Ignition Point (°C )
Explosion Properties
Density (g/cm3)
Form: Powder
Color:Black
Odor:odorless
: Not applicable
: Not applicable
: Not applicable
: No data
: No data
: 7.3 (bulk density : 2.0)
: Negligible
Solubility in water
10. STABILITY AND REACTIVITY
Stability
: Stable
Hazardous Reactions
Conditions to Avoid
Materials to Avoid
: Dust explosion, like most finely divided organic powders.
: Electric discharge, throwing into fire.
: Oxidizing materials
Hazardous Decomposition Products : CO, CO2 and NOX
Further Information
: None
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Ingestion (oral)
Inhalation
: LD50 > 2000mg/kg (Rats)
: No data
Eye irritation
: No data
Skin irritation
Skin sensitizer
Mutagenicity
Carcinogenicity
: Not an irritant (Rabbits)
: No sensitization
: Negative (Ames Test)
: In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human
carcinogen). This classification is given to chemicals for which there is inadequate
human evidence, but sufficient animal evidence on which to base an opinion of
carcinogenicity. The classification is based upon the development of lung tumors in rats
receiving chronic inhalation exposures to free carbon black at levels that induce particle
overload of the lung. Studies performed in animal models other than rats did not show
any association between carbon black and lung tumors. Moreover, a two-year cancer
bioassay using a typical toner preparation containing carbon black demonstrated no
association between toner exposure and tumor development in rats.
88
Page: 4/4
MATERIAL SAFETY DATA SHEET
Data Issued: Jun. 1. 2003
MSDS No. F-31211
Chronic Effect
: In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate
degree of lung fibrosis was observed in 92% of the rats in the high concentration
(16mg/m3) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of
the animals in the middle (4mg/m3) exposure group, but no pulmonary change was
reported in the lowest (1mg/m3) exposure group, the most relevant level to potential
human exposures.
12. ECOLOGICAL INFORMATION
No data are available.
13. DISPOSAL CONSIDERATIONS
Waste from residues
: Waste material may be dumped or incinerated under conditions which meet all
federal, state and local environmental regulations.
Contaminated Packaging : Waste may be disposed or incinerated under conditions which meet all federal,
state and local environmental regulations.
14. TRANSPORT INFORMATION
UN Classification
: None
Not classified as hazardous for transport.
15. REGULATORY INFORMATION
US Information
TSCA (Toxic Substances Control Act):
All chemical substances in this product comply with all applicable rules or order under TSCA.
SARA (Superfund Amendments and Reauthorization Act) Title III
302 Extreme Hazardous Substance: None
311/312 Hazard Classification
EU Information
: None
1999/45/EC and 67/548/EEC
Symbol & Indication
R-Phrase
: Not required
: Not required
76/769/EEC
: All chemical substances in this product comply with all applicable rules
or order under 76/769/EEC.
16. OTHER INFORMATION
NFPA Rating (USA)
: Health=1 Flammability=1 Reactivity=0
WHMIS Legislation (Canada) : This product is not a controlled product.
References
IARC (1996) : IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol.
65, Printing Process And Printing Inks, Carbon Black and Some Nitro Compounds, Lyon,
pp.149-261
H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow,
U.Mohr, S.Takenaka, and R.Mermelstein (1991) Pulmonary Response to Toner upon Chronic Inhalation
Exposure in Rats.
Fundamental and Applied Toxicology 17, pp.280-299.
The information on this data sheet represents our current data and best opinion as to the proper use in handling
of this product under normal conditions. However, all materials may present unknown hazards and should be
used with caution. Although certain hazards are described herein, we do not guarantee that these are the only
hazards which exist.
89
INDEX
2
Copy functions ....................................................... 18
Copy ratio display key ................................ 11, 24, 72
2 IN 1 / 4 IN 1 copy ..................................... 34, 44, 45
2 IN 1 / 4 IN 1 indicator ..................................... 10, 34
2 IN 1 / 4 IN 1 key ............................................. 10, 34
2 x 250-sheet paper feed unit ................................. 75
250-sheet paper feed unit ....................................... 75
D
Dark indicator................................................... 11, 21
Dark key............................................... 11, 21, 42, 43
Developer replacement required indicator ....... 10, 62
Differences between models.................................... 6
Display ............................................................. 11, 40
Document cover..................................... 8, 18, 20, 72
Document feeder cover............................................ 8
Document feeder tray......................................... 9, 19
Document glass ........................................... 8, 18, 30
Dual function board .......................................... 32, 76
DUAL PAGE COPY indicator ........................... 10, 30
DUAL PAGE COPY key................................... 10, 30
A
About the operation manuals .................................... 5
- Online Manual.................................................... 5
- Operation Manual .............................................. 5
- Software Setup Guide........................................ 5
Adjusting the automatic exposure level................... 42
Alarm indicators .............................. 10, 47, 49, 62, 72
Appendix ................................................................. 77
Audible signals.................................................. 46, 47
AUDIT CLEAR key.................................................. 10
Auditing mode ....................................... 45, 48, 50, 51
- Setting.............................................................. 49
Auto clear.............................................. 12, 18, 19, 44
AUTO IMAGE indicator..................................... 11, 23
AUTO IMAGE key............................................. 11, 23
AUTO PAPER SELECT indicator ..................... 10, 20
Auto paper select mode .................................... 20, 45
Auto power shut-off mode................................. 12, 44
Auto tray switching............................................ 21, 45
AUTO/TEXT/PHOTO key...................... 10, 21, 42, 43
Automatic two-sided copying .................................. 27
- Document glass ............................................... 28
- RSPF ............................................................... 28
E
Enabling toner save mode ..................................... 43
Environmental information ....................................... 5
Erase copy ............................................................. 37
ERASE indicator .............................................. 10, 37
ERASE key ...................................................... 10, 37
Erase width adjustment.......................................... 45
Exit area................................................................... 9
F
Feeding roller cover ............................................... 63
Front cover............................................................... 8
Fusing paper guide ................................................ 67
Fusing unit paper guide............................................ 9
Fusing unit release lever..................................... 9, 66
B
Base setting ...................................................... 46, 47
Basic procedure for printing .................................... 39
Before using the machine ......................................... 8
Button Manager scan menu.................................... 41
Bypass tray ............................................. 8, 13, 15, 26
Bypass tray extension......................................... 8, 15
Bypass tray guides.................................................... 8
Bypass tray paper feed roller .................................. 73
H
Handles.................................................................... 8
I
Image rotation in duplex copying ..................... 29, 45
Indicators and display messages........................... 62
Initial settings ......................................................... 12
INTERRUPT indicator ...................................... 11, 31
INTERRUPT key.............................................. 11, 31
C
Caution...................................................................... 3
- Cautions on handling ......................................... 4
- Cautions on using .............................................. 3
- Installation site ................................................... 3
Changing a tray’s paper size setting....................... 16
Charger cleaner .................................................. 8, 73
Checking the total output count............................... 71
Checking the toner level.......................................... 72
Cleaning
L
Light indicator................................................... 11, 21
Light key....................... 11, 21, 42, 43, 47, 49, 53, 72
Loading paper .................................................. 13, 14
Loading the bypass tray......................................... 15
Loading the paper tray ........................................... 14
Location of the margin...................................... 36, 45
Lower side cover.................................................... 69
- Bypass tray paper feed roller........................... 73
- document cover ............................................... 72
- document glass................................................ 72
- SPF/RSPF ....................................................... 72
- Transfer charger .............................................. 73
CLEAR ALL key ................................................ 11, 12
CLEAR key.................................................. 11, 18, 19
Conventions used in this manual .............................. 6
90
M
PRESET RATIO selector indicator................... 11, 23
PRESET RATIO selector keys....... 11, 22, 23, 24, 25
Printer/scanner functions ....................................... 38
Main features ............................................................ 7
Maintenance indicator....................................... 10, 62
Making a copy darker or lighter............................... 21
Margin shift.............................................................. 36
MARGIN SHIFT indicator.................................. 10, 36
MARGIN SHIFT key.......................................... 10, 36
Margin width...................................................... 36, 45
Misfeed indicator......................................... 10, 62, 63
Misfeed location indicator............................ 11, 62, 63
Misfeed removal
R
READ-END key.............................. 11, 28, 33, 34, 71
Reduction/enlargement/zoom ................................ 22
- Automatic ratio selection................................. 22
- Manual ratio selection ..................................... 23
- XY ZOOM copying .......................................... 24
Removing the document cover .............................. 20
Removing the software .......................................... 61
Replacing the toner cartridge ........................... 70, 72
Reversing single pass feeder (RSPF)................ 6, 75
Reversing tray.................................................... 9, 64
Right side cover ................................................. 9, 63
Roller rotating knob ...................................... 9, 65, 66
Rotation copy ................................................... 32, 45
Routine maintenance ....................................... 71, 72
- Bypass tray ...................................................... 64
- Lower paper tray.............................................. 69
- Machine ........................................................... 65
- SPF/RSPF ....................................................... 63
- Upper paper tray.............................................. 68
N
Normal copying ....................................................... 18
- Document glass ............................................... 18
- SPF/RSPF ....................................................... 19
Notice page............................................................. 61
Numeric keys ........................................ 11, 22, 47, 49
S
SCAN indicator................................................. 10, 40
SCAN key................................................... 10, 40, 41
SCAN MENU key....................................... 10, 40, 41
Scanning from your computer................................ 41
Scanning using the keys on the machine............... 40
Selecting the tray ................................................... 21
Setting the layout pattern ....................................... 35
Setting the number of copies ................................. 22
Side cover ................................................................ 8
Side cover handle .................................................... 8
Single pass feeder (SPF)................................... 6, 75
Software license..................................................... 80
SORT/GROUP indicator .................................. 10, 33
SORT/GROUP key .......................................... 10, 33
Specifications......................................................... 77
SPR/RSPF indicator............................................... 11
START indicator............................................... 11, 12
START key..................................... 11, 12, 18, 19, 47
Storage of supplies ................................................ 76
Stream feeding mode....................................... 20, 44
O
Offset of paper output tray ...................................... 45
ON LINE indicator ............................................. 10, 39
ON LINE key ..................................................... 10, 39
Operation in copy, printer, and scanner modes ...... 41
Operation panel................................................... 8, 10
ORIGINAL DATA indicator.......................... 10, 33, 35
Original guides .................................................... 9, 19
ORIGINAL SIZE ENTER key ...................... 11, 16, 18
ORIGINAL SIZE indicator ................................. 11, 19
ORIGINAL TO COPY indicator ................... 10, 28, 29
ORIGINAL TO COPY key ........................... 10, 28, 29
Original types .......................................................... 21
- AUTO............................................................... 21
- PHOTO ............................................................ 21
- TEXT................................................................ 21
P
Paper....................................................................... 13
Paper feed location indicator................................... 11
Paper output tray....................................................... 8
Paper required indicator.............................. 10, 13, 62
PAPER SIZE ENTER key ................................. 11, 16
PAPER SIZE indicator ................................ 11, 16, 18
Paper tray................................................ 8, 14, 68, 69
Parallel port............................................................... 9
Part names and Functions ........................................ 8
- Operation panel ................................................. 8
Peripheral devices................................................... 74
Photoconductive drum .............................................. 9
Power...................................................................... 12
Power off............................................................. 8, 12
Power on............................................................. 8, 12
POWER SAVE indicator ............................. 11, 12, 55
Power save modes.................................................. 12
Power switch....................................................... 8, 12
Preheat mode.................................................... 12, 44
91
T
X
Toner cartridge.................................................... 9, 70
Toner cartridge lock release lever....................... 9, 70
Toner cartridge replacement required indicator.. 10, 62, 70
Total copy count...................................................... 71
Total output count ................................................... 71
Total scan count...................................................... 71
Transfer charger...................................................... 73
TRAY SELECT key............. 11, 15, 16, 18, 19, 21, 22
Troubleshooting ...................................................... 52
- Machine/copying problems .............................. 53
- Printing and scanning problems....................... 56
Two-sided copying using the bypass tray ............... 26
XY-ZOOM indicator.......................................... 10, 24
XY-ZOOM key.................................................. 10, 24
Z
ZOOM indicator................................................ 11, 23
Zoom keys.................................................. 11, 23, 24
U
USB 1.1 port.............................................................. 8
USB 2.0 port.................................................. 9, 38, 46
User programs ........................................................ 44
- Selecting a setting............................................ 47
User settings ........................................................... 42
Using the manual ...................................................... 5
Using the printer mode............................................ 39
Using the scanner mode ......................................... 40
INDEX BY PURPOSE
Copying
Machine settings
Automatic ratio selection......................................... 22
Auditing mode
Automatic two-sided copies
- Copies, how to make....................................... 51
- Setting procedures.......................................... 49
- Settings ........................................................... 48
Automatic exposure level, setting .......................... 42
Toner save mode ................................................... 43
User programs ....................................................... 44
- Setting procedures.......................................... 47
- Settings ........................................................... 44
- Document cover............................................... 28
- Inverting top and bottom .................................. 29
- SPF/RSPF ....................................................... 28
Canceling a copy run ........................................ 18, 19
Copying, starting ............................................... 18, 19
Dual page copying .................................................. 30
Enlargement/reduction............................................ 22
Exposure adjustment .............................................. 21
Exposure selector ................................................... 21
Interrupt copying ..................................................... 31
Manual ratio selection ............................................. 23
Number of copies, setting ....................................... 22
Original cover, removing ......................................... 20
Original size, specifying .......................................... 18
Original, placing
Problem occurs
Misfeeds
- Bypass tray ..................................................... 64
- Machine (fusing area) ..................................... 66
- Machine (paper feed area).............................. 65
- Machine (transfer area)................................... 67
- SPF/RSPF....................................................... 63
- Tray (Lower paper tray, 250 sheet /
250 sheet x 2 paper feed unit) ....................... 69
- Tray (Upper paper tray)................................... 68
Troubleshooting ..................................................... 52
- Document cover............................................... 19
- SPF/RSPF ....................................................... 22
Tray selection.......................................................... 21
Two-sided copies using bypass tray ....................... 26
XY Zoom ................................................................. 24
Indicators, lit and blinking
[
[
[
[
[
] Developer replacement required indicator ... 62
] Maintenance indicator.................................. 62
] Misfeed indicator.................................... 62, 63
] Paper required indicator ........................ 62, 13
] Toner cartridge replacement required
indicator
Convenient copying functions
2 in 1 / 4 in 1 copy
- -Document cover.............................................. 34
- -SPF/RSPF ...................................................... 35
Center erase copy................................................... 37
Edge erase copy ..................................................... 37
Layout, setting......................................................... 35
Rotating copies ....................................................... 32
Sort/group copying
- Blinking .............................................. 62, 70
- Lit ....................................................... 62, 70
- Document cover............................................... 33
- SPF/RSPF ....................................................... 33
92
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
WARNING:
FCC Regulations state that any unauthorized changes or modifications to
this equipment not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the operation manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Shielded cables must be used with this equipment to maintain compliance
with standard.
NOTICE
BE SURE TO ASK YOUR AUTHORIZED SHARP DEALER ABOUT THE WAR-
RANTY THAT YOUR SELLING DEALER EXTENDS TO YOU. In order to assure
you, the end-user, of warranty protection, Sharp extends a limited warranty to each
of its authorized dealers and, in turn, requires each of its authorized dealers to
extend its own warranty to you on terms that are no less favorable than those given
to the dealer by Sharp. You should be aware, however, that Sharp does not itself
extend any warranties, either express or implied, directly to you, the end-user, and
no one is authorized to make any representations or warranties on behalf of Sharp.
Specifically, SHARP DOES NOT EXTEND TO YOU, THE END-USER, ANY EX-
PRESS WARRANTY OR ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR USE OR FITNESS FOR ANY PARTICULAR PURPOSE IN CON-
NECTION WITH THE HARDWARE, SOFTWARE OR FIRMWARE EMBODIED
IN, OR USED IN CONJUNCTION WITH THIS PRODUCT. Sharp is not respon-
sible for any damages or loss, either direct, incidental or consequential, which you,
the end-user, may experience as a result of your purchase or use of the hardware,
software or firmware embodied in or used in conjunction with this Product. Your
sole remedy, in the event that you encounter any difficulties with this Product, is
against the authorized dealer from which you purchased the Product.
AR-M160 Digital Multifunctional System
AR-M205 Digital Multifunctional System
In the event that this authorized dealer does not honor its warranty commitments,
please contact the General Manager, Business Products Group, Sharp Electronics
Corporation, Sharp Plaza, Mahwah, NJ 07430-2135, so that Sharp can try to help
assure complete satisfaction of all the warranty rights to which you are entitled from
the authorized dealer.
|