Samsung Gh68 06997a User Manual

* Depending on the software installed or your service provider, some

of the description in this manual may differ from your phone.

* Depending on your country, your phone and accessories may

appear different from the illustrations in this manual.

Printed in Korea

Code No.:GH68-06997A

English. 05/2005. Rev 1.0

World Wide Web

http://www.samsungmobile.com

Use road safety at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 91.

Key in the emergency number for your present

location, then press

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful

attention to the subsequent information

regarding safety or phone features.

•

MP3 player

Play MP3 music files using your

phone as an MP3 player.

Indicates that you can get more information

on the referenced page.

ꢀ

→

Indicates that you need to press the

Navigation keys to scroll to the specified

option and then select it.

•

Women’s life

Use multiple features designed for

women in our modern world.

[

]

Indicates a key on the phone. For example,

[

]

< >

Indicates a soft key, whose function is

displayed on the phone screen. For example,

<Menu>

•

Bluetooth

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, video, and audio.

Send photos, images, videos, and

other personal data, and connect

to other devices using free,

wireless Bluetooth technology.

E-mail

Send and receive e-mails with images, video, and

audio attachments.

•

Get personal with photo caller

See who’s calling you when their

very own photo displays.

•

Java

Enjoy Java™-based embedded

games and download new games.

Name card

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

Calendar

Keep track of your daily, weekly,

and monthly schedule.

Voice recorder

Record memos or sounds.

Browse the web ................................................... 17

Use Phonebook .................................................... 18

Send messages.................................................... 19

View messages .................................................... 21

Use Bluetooth...................................................... 22

Contents

Unpack

Make sure you have each item

Your phone

Enter text

AB, T9, Numeric, and Symbol mode

Call functions

Buttons, features, and locations

Get started

Advanced calling features

Menu functions

First steps to operate your phone

Install and charge the phone ................................... 7

Power on or off...................................................... 8

Keys and display.................................................... 9

Access menu functions.......................................... 11

Customise your phone .......................................... 12

Make/Answer calls................................................ 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Index

Begin with your camera, music, and other special features

Use camera......................................................... 15

Play MP3s ........................................................... 16

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call records

ꢀ

p.30

3 Applications

ꢀ

p.36

5 Messages

ꢀ

p.49

8 Camera

9 Settings

ꢀ

p.70

p.77

1 Current contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀp.30

ꢀp.31

ꢀp.32

1 Java world

2 MP3 player

3 Women’s life

4 Voice recorder

5 World time

6 Alarm

7 PIM sync

8 Calculator

9 Converter

0 Timer

ꢀp.37

ꢀp.39

ꢀp.43

ꢀp.44

ꢀp.45

ꢀp.46

ꢀp.47

1 Create message

2 My messages

3 Templates

4 Delete all

5 Settings

ꢀ

p.49

p.52

p.58

p.63

ꢀ

1 Time & Date

ꢀp.77

ꢀp.78

ꢀp.79

ꢀp.81

ꢀp.83

ꢀp.86

ꢀp.87

ꢀp.88

2 Phone settings

3 Display settings

4 Sound settings

5 Network services

6 Bluetooth

7 Security

8 Connection settings

9 Reset settings

6 Call time

6 Memory status

7 Call cost^*

6 File manager

ꢀ

p.63

2 Phonebook

ꢀp.32

Images

Videos

Music

Sounds

Other files

Memory status

ꢀ

p.63

p.64

p.65

1 Contacts list

2 Add new contact

3 Group

ꢀp.32

ꢀp.33

ꢀp.34

ꢀp.35

ꢀp.36

Stopwatch

4 Browser

ꢀp.47

4 Speed dial

5 My name card

6 Own number

7 Management

8 Service number^*

* Shows only if supported by your SIM

card.

1 Home

2 Bookmarks

3 http://

4 WAP profile

5 Clear cache

ꢀp.47

ꢀp.48

ꢀp.49

7 Calendar

ꢀ

p.66

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Display

Phone

Travel Charger

Camcorder

microphone

Camera

Navigation keys

(Up/Down/Left/

Right)

Camera key

Flash

Headset jack

External

display

WAP access/

Confirm key

Soft key (right)

Power on/off/

Menu exit key

Battery

User’s Manual

Soft key (left)

Volume keys

Dial key

You can obtain various accessories from

your local Samsung dealer.

Correct key

Microphone

The items supplied with your phone

and the accessories at your Samsung

dealer may vary, depending on your

country or service provider.

Alphanumeric

keys

Special

function keys

Get started

First steps to operate your phone

Install the battery.

Plug the travel charger

into the phone.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Plug the charger into a standard AC wall outlet.

Remove the battery.

Insert the SIM card.

The LED on the charger indicates the charging

progress:

•

Red: the battery is being charged.

Green: the battery is completely charged.

Orange: the battery is not correctly plugged in

or is operating at a too high or too low

temperature.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding

[

Get started

Power on or off

When the phone is completely charged (green

charger LED), unplug the charger from the power

outlet.

Switch on

1. Open the phone.

Remove the charger from the phone.

2. Press and hold [ ] to turn on

the phone.

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

use is prohibited.

press <OK>.

1. Open the phone.

Switch off

Low battery indicator

2. Press and hold [ ].

When the battery is low:

•

a warning tone sounds,

the battery low message displays, and

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Keys and display

End a call.

Hold down to switch the phone on and off.

In Menu mode, cancel input and return the

phone to Idle mode.

Key(s) Description

Perform the function indicated on the

bottom line of the display.

Enter numbers, letters, and some special

characters.

In Idle mode, access your favourite menus

In Idle mode, hold [1] down to access your

directly.ꢀp. 77

voice mail server. Hold [

0] down to enter an

international call prefix.

In Menu mode, scroll through the menu

options.

Enter special characters.

Hold [ down to activate or deactivate

]

In Idle mode, launch the Wireless

Application Protocol (WAP) browser.

Quiet mode.

In Menu mode, select the highlighted menu

option.

Adjust the phone volume.

In Idle mode, with the phone open, adjust

the keypad tone volume. With the phone

closed, hold down to turn on the backlight.

Delete characters from the display.

(on the left)

Send or answer a call.

In Idle mode, retrieve the recent numbers

dialled, missed, or received.

In Idle mode, hold down to turn on the

camera.

In Camera mode, take a photo or record a

video.

(on the right)

Get started

Display

Layout

Icons

(continued)

New voice mail

Icons

Call diverting feature is active

Bluetooth feature is active

Connected to hands-free or headset

Synchronised with a PC

GPRS network

display various icons.

Text and graphics

display messages,

instructions, and

information you enter.

Soft key function indicators

show the current functions

assigned to the two soft

keys.

Contacts

Roaming network

Home Zone, if you have registered

for the appropriate service

Icons^*

Received signal strength

Call in progress

Call ringer set to vibrate

Mute mode is active during a call

Quiet mode is active (Mute)

Quiet mode is active (Vibration)

Battery power level

Out of your service area; you cannot

send or receive calls

Alarm set

New message

New e-mail

* The icons shown on the display may vary, depending

on your country or service provider.

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> or [ ] to

confirm the function displayed

or option highlighted.

Contacts

4. To exit, choose either of the

following methods.

•

Press <Back> to move up

one level.

•

Press [ ] to return to Idle

mode.

Press the right soft

key to access

Contacts list in the

Phonebook menu.

Press the left soft

key to access

Menu mode.

Use shortcuts Press the number key

corresponding to the option you

want.

Get started

Customise your phone

You can set a wallpaper for the

main or external display.

Idle mode

wallpaper

1. In Idle mode, press <Menu

Display

1. In Idle mode, press <Menu

and select Settings

settings Language

2. Select a language.

→

Phone

language

and select Settings

→

Display

→

settings Wallpaper

→

Main

display or Cover display

2. Select an image category.

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ringtone

→

Sound

For Main display, you can also

select a video category.

→

Incoming call

→

3. Select an image and press

2. Select a ringer category.

3. Select a ringer melody.

4. Press <Save>.

<Select> or select a video clip,

if saved in 3GP format, and

press <Add>.

4. Press <Save>.

You can change the colour for the

display components, such as title

bars and highlight bars.

You can use the Navigation keys as

shortcut keys to access specific

menus directly from Idle mode.

Menu mode

skin colour

shortcuts

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

To assign a shortcut menu:

→

1. In Idle mode, press <Menu

and select Settings Phone

settings Short cut

2. Select a key.

→

You can switch to Quiet mode to

avoid disturbing other people with

your phone sound.

Quiet mode

3. Select a menu to be assigned to

the key.

Press and hold

[

]

in Idle mode.

Make/Answer calls

You can protect the phone against

unauthorised use with a phone

password.

Phone lock

1. In Idle mode, enter an area code

and phone number.

2. Press

3. To end the call, press

Make a call

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

[

→

[

→

1. When the phone is ringing, press

Answer a call

[

“00000000” and press <OK>.

2. To end the call, press

[

3. Enter a new 4- to 8- digit

password and press <OK>.

Press [ ].

Adjust the

volume during

a call

4. Enter the new password again

and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Step outside the phone

Begin with your camera, music, and other special features

Use camera

1. In Capture mode, press the left

View a photo

soft key and select Go to

photos

2. Press [Left] or [Right] to select

a photo category.

1. Open the phone.

Take a photo

3. Select a photo you want.

2. In Idle mode, press and hold

[

]

to turn on the camera.

1. In Idle mode, press and hold

Record a video

3. Aim the lens at the subject and

adjust the image.

[

] to turn on the camera.

2. Press [1] to switch to Record

4. Press

[

] to take a photo. The

mode.

photo is saved automatically.

3. Press

4. Press

[

] to start recording.

5. Press <Preview> to return to

[

] to stop recording. The

Capture mode.

video is saved automatically.

5. Press <Preview> to return to

Record mode.

Step outside the phone

Play MP3s

1. In Record mode, press the left

Play a video

soft key and select Go to

Use these methods:

Copy MP3 files

to the phone

videos

•

Download from the wireless

web p. 47

2. Press [Left] or [Right] to select

a video category.

ꢀ

•

Download from a computer

using Samsung PC Studio

3. Select a video you want.

ꢀSamsung PC Studio User’s

Guide

•

Receive via Bluetoothꢀp. 86

1. In Idle mode, press <Menu

and select Applications

MP3 player

2. Press <Options> and select

Add to playlist Add all or

Add files

Create a play

list

→

3. For Add files, select specific

files and press <Select>.

Repeat from step 2.

Browse the web

1. From the MP3 player screen,

press [ ].

Play MP3 file

Using a built-in WAP (Wireless Access Protocol)

browser, you can get easy access to the wireless web

to get a variety of up-to-date services and information

and to enjoy downloads of web content.

2. During playback, use the

following keys:

•

[

]: pauses/resumes

playback.

[Left]: goes back to the

previous file.

[Right]: skips to the next

file.

[Up]: opens the play list.

[Down]: stops playback.

In Idle mode, press [ ].

Launch the

browser

•

To scroll through browser items,

press [Up] or [Down].

Navigate with

the WAP

browser

•

To select an item, press

<Options> and select Select.

[

]: adjusts the volume.

To return to the previous page,

press <Options> and select

Back

•

To access browser options,

press <Menu>.

Step outside the phone

Use Phonebook

To the SIM card:

1. In Idle mode, enter a phone

To the phone’s memory:

Add an entry

number and press <Options>.

1. In Idle mode, enter a phone

2. Select Save contact

→

SIM.

number and press <Options>.

3. Enter a name.

2. Select Save contact

a number type.

→

Phone

→

4. Press <Save> to save the

entry.

3. Specify the contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtone, Group, and

Memo.

1. In Idle mode, press

Find an entry

<Contacts>.

2. Select an entry.

4. Press <Save> to save the

3. Select a number and press

entry.

[

]

to dial, or press

<Options> to access options.

Send messages

1. In Idle mode, press <Menu

and select Phonebook My

name card

Create and

send a name

card

→

1. In Idle mode, press <Menu

Send a text

message (SMS)

and select Messages

message

2. Enter the message text.

3. Press <Options> and select

→

Create

Text message.

2. Specify your contact

information.

→

3. Press [ ] to save the name

card.

Save and send or Send only

4. Enter destination numbers.

5. Press [ ] to send the message.

4. To send the name card to other

people, press <Options> and

select Send

→

SMS/MMS/

Email Bluetooth

1. In Idle mode, press <Menu

Send a

2. and select Messages

Create message

Multimedia message

3. Select Subject

→

multimedia

message

(MMS)

→

4. Enter the message subject and

press [ ].

Step outside the phone

5. Select Picture&Video or

1. In Idle mode, press <Menu

Send a

Send an e-mail

Sound and add a media file.

and select Messages

message Email

2. Select Subject

→

Create

multimedia

message

(MMS)

→

For Picture&Video, select Add

image or Add video to add a

photo or video clip.

(continued)

3. Enter the e-mail subject and

press [ ].

For Sound, select Add sound

to add a sound clip.

4. Select Message

5. Enter the e-mail text and press

6. Select File attach

6. Select Message

7. Enter the message text and

press [ ].

[

8. Press <Options> and select

7. Add image, video, music, or

sound files.

Send

9. Enter destination numbers.

8. Press <Options> and select

10.Press [ ] to send the message.

Send.

9. Enter e-mail addresses.

10.Press [ ] to send the e-mail.

View messages

From the Inbox:

View a

1. In Idle mode, press <Menu

multimedia

message

(continued)

When a notification appears:

View a text

message

and select Messages

messages Inbox

2. Select a message.

→

1. Press <View>.

→

2. Select a message from the

Inbox.

From the Inbox:

1. In Idle mode, press <Menu

View an e-mail

1. In Idle mode, press <Menu

and select Messages

messages Email box

2. Select an account.

→

and select Messages

messages Inbox

2. Select a message.

→

3. Press <Yes> when Check new

Email is displayed to retrieve

an e-mail or a header.

When a notification appears:

View a

multimedia

message

1. Press <View>.

4. Select an e-mail or a header.

5. If you selected a header, press

2. Press <Options> and select

Retrieve

Options> and select

3. Select a message from the

Inbox.

Retrieve

Step outside the phone

Use Bluetooth

1. Access an application.

2. Scroll to an item.

Send data

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

3. Press <Options> and select

Send via

→

Bluetooth.

4. Select a device.

In Idle mode, press <Menu> and

Turn on

Bluetooth

5. If necessary, enter the

select Settings

→

Bluetooth

→

Bluetooth PIN and press <OK>.

Activation On

→

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

→

If necessary, press <Yes> to

confirm the reception.

Search new device

2. Select a device.

3. Enter a Bluetooth PIN code or

the other device’s Bluetooth PIN

code, if it has one, and press

<OK>.

When the owner of the other

device enters the same code,

pairing is complete.

Using AB mode

Press the appropriate key until the character you want

appears on the screen.

Enter text

AB, T9, Numeric, and Symbol mode

You can enter text for some features such as

messaging, Phonebook, or Calendar, using AB mode,

T9 mode, Numeric mode, and Symbol mode.

Changing the text input mode

The text input mode indicator appears when the cursor

is in a text field.

•

Press and hold [ ] to switch between T9 and AB

modes. Depending on your country, you may also

be able to access your specific language.

Press [ ] to change case or switch to Numeric

mode.

•

Press and hold [ ] to switch to Symbol mode.

Tips for using AB mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

Enter text

•

Press [ ] to insert a space.

For example, OF and ME use [6] and [3].

•

Press the Navigation keys to move the cursor.

4. Press [ ] to insert a space and enter the next

word.

Press [

] to delete characters one by one. Press

and hold [

C] to clear the display.

Tips for using T9 mode

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

Entering a word in T9 mode

Press [

C] to delete characters one by one. Press

and hold [

] to clear the display.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter HELLO in T9 mode.

2] to [9] to start entering a word. Press

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

5], [5], and [6] to

T9 predicts the word that you are typing, and it

may change with each key that you press.

2. Press [0] to display alternative words for your key

presses. When there are no more alternative

words, Add appears on the bottom line.

2. Enter the whole word before editing or deleting

characters.

3. Press <Add>.

3. When the word displays correctly, go to step 4.

4. Enter the word you want using AB mode and press

Otherwise, press [

0] to display alternative word

<OK>.

choices for the keys that you have pressed.

Using Numeric mode

Numeric mode enables you to enter numbers.

Call functions

Advanced calling features

Press the keys corresponding to the digits you want.

Making a call

1. In Idle mode, enter the area code and phone

number.

Using Symbol mode

Symbol mode enables you to insert symbols.

2. Press [

Press

[

C] to clear the last digit or press and hold

display more symbols

select a symbol

[Up] or [Down].

[C]

to clear the whole display. You can move the

the corresponding

number key.

cursor to edit an incorrect digit.

Making an international call

1. In Idle mode, press and hold [

clear the entered symbol(s)

insert the symbol(s)

[C].

0]. The

character

appears.

<OK>.

2. Enter the country code, area code, and phone

number, then press [ ].

Redialling recent numbers

1. In Idle mode, press [

recent numbers.

] to display the list of

Call functions

2. Scroll to the number you want and press [

Answering a call

Making a call from Phonebook

When you receive an incoming call, the phone rings

and displays the incoming call image.

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

Press <Accept> or [

] to answer the call.

Phonebook.ꢀp. 32

Tips for answering a call

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

•

When Anykey answer in the Extra settings

menu is active, you can press any key, except for

keys.ꢀp. 34

<Reject> or [ ].ꢀp. 78

Dialling a number from the SIM card

When Active folder in the Extra settings menu

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

is active, you can simply open the phone.

ꢀ

p. 78

•

Press <Reject> or [ ] to reject a call.

2. Press [Left] or [Right] to scroll through other

numbers.

With the phone closed, press and hold [

reject a call.

] to

3. Press <Dial> or [

] to dial the number you

want.

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

Ending a call

Close the phone or press [ ].

1. Press <View>.

2. If necessary, scroll through the missed calls.

3. Press [

] to dial the number you want.

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Connect the headset to the jack on the right side of

the phone.

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

The buttons on the headset work as listed below:

Press

redial the last call

answer a call

end a call

and hold the button twice.

the button.

4. Press <Options> and select End held call to end

the call on hold.

the button.

5. To end the current call, press [ ].

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports it and you have

Options during a call

You can access a number of functions during a call.

activated the call waiting feature.

1. Press [ ] to answer the call. The first call is

automatically put on hold.

2. Press <Swap> to switch between the calls.

ꢀp. 82

Adjusting the volume during a call

Use [

] to adjust the earpiece volume during a call.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Call functions

3. Press <Options> and select End held call to end

Using the menu options

You can access Menu mode and use menu functions.

the call on hold.

4. To end the current call, press [ ].

During a call, some menu functions are not

available.

Transferring a call

Press <Options> and select Menu

You can transfer the currently active call to a caller on

hold, if your network supports it. With this option, the

two callers can talk to each other, but you are

disconnected from the call.

Switching off the microphone (Mute mode)

You can temporarily switch off your phone’s

microphone so that the person on the phone cannot

hear you.

Press <Options> and select Transfer

Using a Bluetooth headset

Press <Options> and select Mute or Unmute

Use an optional Bluetooth headset to talk on the

phone without holding the phone to your ear. To use

this feature, you first need to register your headset

Muting or sending key tones

You can turn the key tones off or on.

and connect it to the phone.

Press <Options> and select Switch to headset or

Switch to phone

ꢀp. 83

Press <Options> and select Mute keys or Send

keys

To communicate with answering machines or

computerised telephone systems, Send keys must

be selected.

Sending a sequence of DTMF tones

Using SIM services

Dual tone multi-frequency (DTMF) tones are the tones

used in phones for tone dialling.

The SIM service menu is available if you use a SIM

card in your phone. A SIM card provides services such

as news, weather, sports, entertainment, and location

services.

You can send DTMF tones as a group after entering the

entire number you need to send or retrieving a

number from Phonebook. This feature is helpful for

entering a password or an account number when you

call an automated system, like a banking service.

For details, see your SIM card instructions or contact

your service provider.

Making a multi-party call

1. When connected with a teleservice system, press

Use this feature to allow as many as six people to join

a multi-party call, or conference call.

Options> and select Send DTMF

2. Enter the number you need to send and press

OK>.

Your service provider must support multi-party calls

for you to use this feature.

Using Phonebook

You can access the Phonebook menu to locate or

store entries.

Setting up a multi-party call

1. Call the first participant.

ꢀp. 32

2. Call the second participant. The first call is

automatically put on hold.

Press <Options> and select Phonebook

3. Press <Options> and select Join. The first

participant is added to the multi-party call.

4. If desired, call another person or answer an

incoming call.

Menu functions

5. Press <Options> and select Join

All menu options listed

6. Repeat steps 4 and 5 as desired.

Call records (Menu 1)

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls.

Having a private conversation with one

participant

1. Press <Options> and select Private

2. Select a name or number from the participant list.

To access this menu, press <Menu> in Idle mode and

You can talk privately with that person, while the

other participants converse with each other.

select Call records

3. To return to the multi-party call, press <Options

Current contacts (Menu 1.1)

and select Join

This menu displays the most recent calls dialled,

received, or missed.

Dropping one participant

1. Press <Options> and select Remove

Accessing a call record

1. Press [Left] or [Right] to select a call type.

2. Press [Up] or [Down] to scroll through the call list.

2. Select a name or number from the participant list.

The participant is dropped from the call, but the

call continues with the other parties.

3. Press [ ] to view the details of a call, or [

dial a number.

] to

3. Close the phone or press [ ] to end the multi-

party call.

Using call record options

Delete all (Menu 1.5)

While viewing the call list, press <Options> to access

the following options:

Use this menu to delete all of the records in each call

type.

•

Detail: show the details of the selected call.

Paste: edit the phone number.

1. Press [ ] to check the call type(s) to be cleared.

2. Press <Delete>.

Save contact: save the number to Phonebook.

Send message: send an SMS or MMS message.

3. Press <Yes> to confirm the deletion.

Call time (Menu 1.6)

Delete: delete the selected call record or all

records.

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

Missed calls (Menu 1.2)

This menu displays the most recent calls that you did

not answer.

•

Last call time: check the length of your last call.

Total sent: check the total length of all the calls

you have dialed.

Dialled calls (Menu 1.3)

•

Total received: check the total length of all the

calls you have received.

This menu displays the most recent calls you have

dialled.

To reset the call timers, press <Reset>. You need to

enter the phone password.

Received calls (Menu 1.4)

The password is preset to 00000000. You can

This menu displays the most recent calls you have

received.

change this password.ꢀp. 87

Menu functions

Call cost (Menu 1.7)

Phonebook (Menu 2)

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

•

Last call cost: check the cost of your last call.

To access this menu, press <Menu> in Idle mode and

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

select Phonebook

Contacts list (Menu 2.1)

Use this menu to search for numbers in Phonebook.

•

Max cost: check the maximum cost limit set in

Press <Contacts> in Idle mode to quickly access

this menu.

Set max cost

Reset counters: reset the cost counters. You

need to enter your PIN2.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

Set max cost: set the maximum cost authorised

for your calls. You need to enter your PIN2.

2. Select the name you want from the list.

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated. You need

to enter your PIN2.

3. Press [

] to dial the number, or <Options> to

access Phonebook options.

2. Change the settings or enter information about the

contact.

Using Phonebook options

While viewing the contact list or contact details, press

•

First name

Mobile Home

number in any category.

Last name: assign a name.

Options> to access the following options:

View: display details about the contact.

Edit: edit the contact information.

Office Fax Other: add a

•

Email: assign an e-mail address.

•

Send message: send an SMS, MMS, or e-mail

message.

Caller ID: assign an image as a caller ID

image to alert you to a call from the number.

Ringtone: assign a ringer melody to alert you

to a call from the number.

•

Add new contact: add a new contact to

Phonebook.

•

Copy to: copy the contact to the phone’s memory

or the SIM card.

•

Group: assign the number to a caller group.

Memo: add a memo about the person.

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

3. Press <Save> to save the contact.

Storing a number on the SIM card

Delete: delete the selected contact or all contacts.

1. Select SIM

Add new contact (Menu 2.2)

2. Enter a name and press [Down].

Use this menu to add a new contact to Phonebook.

3. Enter a phone number and press [Down].

4. Change the location number, if necessary.

5. Press <Save> to save the contact.

Storing a number in the phone’s memory

1. Select Phone

Menu functions

Managing caller groups

Group (Menu 2.3)

While viewing the group list, press <Options> to

access the following options:

Use this menu to organise your contacts in caller

groups.

•

View: display the members of the selected group.

Add: add a new group.

Creating a new caller group

1. Press <Options> and select Add

Edit: change the properties of the selected group.

2. Enter a name for the group.

Send message: send an SMS, MMS, or e-mail

message to the member(s) you want.

3. Select the Caller ID line and select an image.

4. Select the Ringtone line and select a melody.

5. Press <Save> to save the group.

•

Delete: delete the selected group or all groups.

Group members, however, are not deleted from

Phonebook.

Adding members to a caller group

1. Select a group.

Speed dial (Menu 2.4)

2. Press <Add>. The list of contacts stored in your

Use this menu to assign a speed dial number (2 to 9)

for eight of your most frequently called numbers.

phone’s memory is displayed.

3. Press [ ] to select specific contacts you want to

add to the selected group and press <Select>.

Assigning speed dial numbers

4. To add more members, press <Options> and

1. Select a key location from

for your voice mail server.

9. [1] is reserved

select Add

→

a contact.

5. Repeat step 4 as desired.

2. Select a contact you want from the contact list.

Managing speed dial entries

Using name card options

From the Speed dial screen, press <Options> to

access the following options:

After saving your name card, press <Options> to

access the following options:

•

Add: assign a number to an unassigned key.

•

Edit: edit the name card.

View: show the number assigned to the key.

Send: send the name card via SMS, MMS, e-mail,

or Bluetooth.

Change: assign a different number to the

assigned key.

•

Exchange name card: exchange name cards with

another person via Bluetooth.

•

Remove: clear the speed dial setting.

Delete: delete the name card.

Dialling speed dial entries

Press and hold the appropriate key in Idle mode.

Own number (Menu 2.6)

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

My name card (Menu 2.5)

Use this menu to create a name card and send it to

other people.

Saving your name card

The procedure for creating your name card is the

same as the one for saving a phone number in the

phone’s memory.ꢀp. 33

Menu functions

Management (Menu 2.7)

Service number (Menu 2.8)

Use this menu to manage Phonebook.

This menu is available if your SIM card supports

Service Dialling Numbers (SDN). Use this menu to

view the list of SDNs assigned by your service

provider, including emergency numbers, directory

enquiries, and voice mail numbers.

•

Default saving: select a default memory location

to save contacts.

If you select Ask on saving, the phone will ask

you to select a memory location when saving a

number.

1. Scroll to the number you want and press <View>.

2. Press <Dial> or [

•

Copy all to phone: copy all of the contacts stored

on the SIM card to the phone’s memory.

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

Applications (Menu 3)

Use this menu to play Java games, to play music files,

to record voice memos, to set time zones and alarms,

or to use the phone as a calculator, timer, or

stopwatch. You can also synchronise Phonebook or

calendar data in the phone’s memory with a computer.

In addition, this menu provides you access other

special functions, such as creating your fragrance

type, checking your biorhythm, and making shopping

lists.

1.Press [ ] to check the location(s) to be cleared.

2.Press <Delete>.

3.Enter the phone password and press <OK>.

The password is preset to 00000000. You

can change this password.ꢀp. 87

4.Press <Yes> again to confirm the deletion.

•

Memory status: display the number of contacts

you have stored in Phonebook.

To access this menu, press <Menu> in Idle mode and

select Applications

Accessing Java settings

Java world (Menu 3.1)

You can select a connection profile for accessing Java

services.

Use this menu to access and play Java games and to

select a profile for accessing Java services.

From the Java world menu, select Settings and then

a profile.

Using Java game options

From the Java world menu, select Downloads and

press <Options> to access the following options:

You can edit a profile using the Connection

settings menu.ꢀp. 87

•

Launch: launch the selected game.

Checking memory status

Delete: delete the selected game or all games,

except for embedded games.

You can view the amount of total memory for the Java

games as well as the amount of available and used

memory. You can also view the number of downloaded

games.

•

Properties: view game properties.

Upgrade: check the game version and update the

game, if the version is outdated.

From the Java world menu, select Memory status

•

Protection: protect the game from being deleted.

Send information: send game properties via

SMS.

MP3 player (Menu 3.2)

Use this menu to enjoy music. First, you need to save

MP3 files in your phone’s memory.

Menu functions

4. Press <Back> to go back to the MP3 player

Downloading or receiving music files

screen.

Use these methods to save MP3 files to your phone’s

memory:

Playing music files

•

Download from the wireless web

ꢀp. 47

From the MP3 player screen, press [ ].

During playback, use the following keys:

Download from a computer using the Samsung PC

Studio programꢀSamsung PC Studio User’s

Keys

Function

Guide

•

Via an active Bluetooth connectionꢀp. 86

Pauses or resumes playback.

Goes to the previous file.

Skips to the next file.

Opens the play list.

The downloaded or received files are stored in the

Music folder. p. 64

Left

Right

Down

ꢀ

Creating a play list

Add MP3 files to the play list.

Stops playback.

1. From the MP3 player screen, press <Options

and select Add to playlist

Adjusts the volume level.

Turns the 3D sound on or off.

Changes the skin type.

Changes the repeat mode

Changes the equalizer mode

Turns shuffle mode on or off.

2. Select either of the following options:

•

Add all: add all of the files in the phone’s

memory to the play list.

Add files: add specific files to the play list.

3. If you selected Add files, press [ ] to check the

files to be added and press <Select>.

•

Properties: view the properties of the file.

Using MP3 file options

From the MP3 player screen, press <Options> to

access the following options:

Accessing the play list

1. From the MP3 player screen, press <Options

•

Play: begin playback.

and select Open playlist to access the play list.

Open playlist: display the play list.

Go to music: go to the Music folder.

2. Press <Options> to access the following options:

•

Play: play the currently selected file.

Add to playlist: add files to the play list.

Change order: move the selected file to the

position you want within the play list.

Remove: remove the selected file or all files

from the play list.

Send via: send the currently selected file via

e-mail or Bluetooth.

•

Set as: set the file as your ring tone or as a caller

alert melody for a Phonebook entry.

•

Remove from playlist: remove the selected file

from the play list.

Properties: view the properties of the file.

Settings: change the default settings for playing

music files.

Women’s life (Menu 3.3)

Your phone has special menus, which can be useful for

women in modern world.

Repeat mode: select a repeat mode.

Shuffle: set the MP3 player to play music in

random order.

Fragrance type (Menu 3.3.1)

Equalizer: select an equalizer setting.

3D sound: turn 3D sound on or off.

Skin: select a skin type.

Use this menu to help you choose the fragrance type

best suited for your personal image according to your

own preferences, such as your favourite food and

music, your hobbies, fashion sense, and the places

you love to go.

Volume: select a volume level.

Menu functions

Creating a profile

Using fragrance type options

1. Press <Yes>.

While viewing the fragrance type list, press

Options> to access the following options:

View type: view the fragrance type details.

Create new: create a new fragrance type.

2. Enter a name for the profile and press <OK>.

•

3. Press [Left] or [Right] to select your favourites for

each option: Food, Beverage, Music, Colour,

Fashion, Hobby, Weather, Vacation spot, and

Perfume using time.

•

Delete: delete the selected fragrance type or all

fragrance types.

4. Press <Save>. The screen displays the fragrance

While viewing the fragrance type details, press

type for you.

<Options> to access the following options:

5. Press [Up] or [Down] to scroll through the screen.

•

Edit type: edit the profile items.

6. Press <Back> to return to the fragrance type list.

•

Send via MMS: send the fragrance type via MMS.

Delete: delete the fragrance type.

7. To add more fragrance types, press <Options

•

and select Create new. Repeat from step 2.

Biorhythm (Menu 3.3.2)

Use this menu to check where you are in your

biorhythm cycle. The biorhythm cycle is based on your

birth date and displays how you are influenced

physically, emotionally, and intellectually by your

biorhythm at a particular moment.

•

Day view: check your biorhythm for the current

date or a specific date.

4. Press <OK> to view the result.

Press <Help> to understand the significance of

1.Enter a date you want.

the percentage.

2.Enter your birth date and press <OK>.

Calories (Menu 3.3.4)

The graphics and numbers are displayed

indicating your biorhythm states for that date.

Use this menu to measure calories you have

consumed and burned, based on the amount of work

and/or exercise you have done. You can also check the

total calories consumed for a day.

3.Press <Options> to access the following

options:

•

Send via text message: send the biorhythm

via SMS.

Report via text message: set to receive

your biorhythm via SMS at a specified time.

Saving a calorie item

1. Select a day on the calendar.

2. Press <Create>.

•

3. Press [Left] or [Right] to select your work category

for each option.

•

Month view: check your biorhythm for the current

month.

As you change a category, the following categories

are displayed differently.

Enter your birth date and press <OK>.

Height/Weight ratio (Menu 3.3.3)

4. Move to the Set time field and enter the length of

Use this menu to measure the percentage by which

you are over or under the ideal weight for your height.

work time.

5. Press <Save>.

1. Press [Left] or [Right] to select your gender.

2. Enter your height.

3. Enter your weight.

Menu functions

Accessing a calorie item

Shopping list (Menu 3.3.6)

Use this menu to make a shopping list by entering

information on items that you want or need to buy and

calculate the total expense.

When you enter the Calories menu, the total calories

consumed for the selected day are displayed at the

bottom of the calendar.

1. Select a shopping bag.

Scroll to a day and press [ ] to view the details.

While viewing the calendar or the calorie list, press

2. Press <Add> to add an item to the bag.

3. Enter the item name.

Options> to access the following options:

View: view the calorie item details.

Create: add a new calorie item.

4. Enter the item price.

•

Press [ ] to insert a decimal point.

5. Enter the number of the item.

6. Press <Save>.

•

Delete: delete the selected calorie item or all

calorie items.

7. To add more items, press <Options> and select

Pink schedule (Menu 3.3.5)

Add. Repeat from step 3.

Use this menu to check the date of your next ovulation

and the period during which you are most likely to get

pregnant.

From the item list on a shopping bag, press

Options> to access the following options:

View: display information on the item.

Add: add a new item to the bag.

1. Enter the first day of your last menstrual period.

•

2. Enter the average length (in days) of your

menstrual cycle.

•

Done/Undo: check off a purchased item or

3. Press <OK>.

remove the check mark.

4. Press [Left] or [Right] to move the calendar.

•

Remove: remove the selected item or all items

from the bag.

•

Properties: view the properties of the voice

memo.

Voice recorder (Menu 3.4)

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Playing a voice memo

1. From the Voice recorder screen, press <Options

Recording a voice memo

and select Go to voice list

1. Press [ ] to start recording.

2. Speak into the microphone.

Press [ ] to pause or resume the recording.

2. Select a voice memo. The memo plays.

During playback, use the following keys:

Keys

Function

3. When you finish, press <Stop>. The voice memo

is saved automatically.

Pauses or resumes playback.

Moves backward.

Moves forward.

4. Press [Up] to record another voice memo, or press

Left

Right

Down

<Options> to access the following options:

•

Play: play back your voice memo.

Record: record another voice memo.

Go to voice list: display the voice memo list.

Send via: send the voice memo via MMS,

e-mail, or Bluetooth.

Stops playback.

Adjusts the volume.

Using voice memo options

•

Delete: delete the voice memo.

Rename: change the name of the voice memo.

Protection: protect the voice memo from

being deleted.

From the Voice recorder screen, press <Options> to

access the following options:

•

Record: record a new voice memo.

Menu functions

•

Go to voice list: go to the list of voice memos you

have recorded.

Applying Daylight Savings Time

1. From the world map, press <Options> and select

Set daylight saving time

•

Setting: select a recording time setting.

2. Press [ ] to check the time zone(s) you want.

Limit for MMS: record a voice memo for adding to

an MMS message.

3. Press <Save>.

Limit for Email: record a voice memo for adding

to an e-mail.

Alarm (Menu 3.6)

Max 1 hour: record a voice memo for up to one

hour.

Use this menu to set alarms to sound at specific times.

Setting an alarm

1. Select the type of alarm.

World time (Menu 3.5)

2. Press [Left] or [Right] to select On on the Alarm

Use this menu to set your local time zone and find out

what time it is in another part of the world.

line and press [Down].

3. Enter the time for the alarm to sound and press

[Down].

Setting your local time zone

1. From the world map, press [Left] or [Right] to

select the city that corresponds to your home time

zone. As the time line moves, the time and date of

the given zone display.

4. Select AM or PM in 12-hour time format and press

[Down].

5. Select a repeat option.

6. Select the Alarm tone line and select an alarm

2. Press <Options> and select Save to save the

melody.

time zone.

7. Press <Save>.

•

Profile name: enter the profile name.

Sync category: select the applications you

want to synchronise.

Stopping an alarm

•

When an alarm sounds, press <Exit> or any key

to stop the alarm.

•

Sync type: select a synchronisation type.

Sync protocol: select a connection method.

•

When a wake-up call alarm sounds, press

<Confirm> or [ ] to stop the alarm.

3. Press <Save> to save the profile.

Otherwise, press <Snooze> or any key to stop

the alarm and cause it to sound again after 5

minutes. You can do this a maximum of five times.

Starting synchronisation

1. Make sure that your PC has MS Outlook and the

WideSync program installed, and the phone and

the PC are connected by a USB cable or an active

Bluetooth connection.

Setting the alarm to ring even if the phone is

off

From the Alarm screen, select Auto power

→

On.

2. Open MS Outlook.

If the phone is off when it is time for the alarm to ring,

the phone is switched on and sounds the alarm.

3. From the PIM sync screen, select a profile.

4. Press [ ].

PIM sync (Menu 3.7)

Using synchronisation options

Use this menu to synchronise personal data with

corresponding PC applications by using the optional

WideSync program.

From the PIM sync screen, press <Options> to access

the following options:

•

Start sync: start a synchronisation for the

selected profile.

Creating a synchronisation profile

1. Press <Add>.

•

View result: show the result of the last

synchronisation.

2. Specify the following information for the profile:

Menu functions

•

New sync profile: add a new profile.

Converter (Menu 3.9)

•

Edit sync profile: change the properties of the

profile.

Use this menu for common conversions, such as

currency and temperature.

•

Delete: delete the selected profile or all profiles.

1. Select a converter.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Calculator (Menu 3.8)

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

3. Enter the value to be converted and press [Down].

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

1. Enter the first number.

Press the left soft key to insert a decimal point or

bracket.

For the currency converter, you can view and

set up the rates by pressing <View rate>.

To move the cursor, press

[

] or [

4. Press [Left] or [Right] to select the unit you want

to convert to.

2. Press one of the Navigation keys to access the

math function you want.

The equivalent value for the amount you entered

displays.

3. Enter the second number.

4. Press [ ] to view the result.

Timer (Menu 3.0)

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

Starting the timer

1. Press <Set>.

Browser (Menu 4)

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

Using the WAP browser, you can access up-to-date

information and a wide variety of media content, such

as wallpapers, ring tones, and music files.

2. Enter the length of time you want to count down

and press <OK>.

3. Press [ ] to start counting down.

Stopping the timer

To access this menu, press <Menu> in Idle mode and

•

Press <Exit> or any key when the timer rings.

select Browser

Press [ ] on the Timer screen to stop the timer

before it rings.

Home (Menu 4.1)

Use this menu to connect your phone to the network

and load the home page of the wireless web service

provider. You can also press [ ] in Idle mode.

Stopwatch (Menu 3.

)

Use this menu to measure elapsed time. The precision

of the stopwatch is one one-hundredth of a second.

The maximum measurement time is 10 hours.

Navigating with the WAP browser

1. Press [ ] to start the stopwatch.

Press

2. Press [ ] to check an interval. You can repeat this

step for a total of 4 intervals.

scroll through browser items

select a browser item

[Up] or [Down].

<Options> and

3. To reset the stopwatch, press <Reset>.

select Select

Menu functions

Exiting the WAP browser

Press [ ] to exit the browser.

Press

return to the previous page

<Options> and

select Back

Bookmarks (Menu 4.2)

Use this menu to save URL addresses in order to

quickly access websites.

Using WAP page options

From any WAP page, press <Menu> to access the

following options:

Adding a bookmark

1. Select an empty location.

•

Bookmarks: display the Bookmarks list.

Reload: reload the current page.

2. Enter a name for the bookmark.

3. Enter a URL address and press <Save>.

Home: go back to the home page.

Go to URL: enter a URL address manually.

Accessing a bookmarked page

Show URL: display the URL address of the current

web page. You can also set the current page as the

home page for the WAP browser or a bookmark.

Scroll to a bookmark item and press [ ].

Using bookmark options

After saving an item, press <Options> to access the

following options:

•

Clear cache: clear the cache memory.

Inbox: access WAP push messages in the WAP

browser.

•

Go to URL: access the bookmarked website.

Edit: edit the address and name of the bookmark.

•

Show images: display images on the current

page.

Delete: delete the selected bookmark or all

bookmarks.

Certificates: display the WAP browser certificate.

http:// (Menu 4.3)

Create message (Menu 5.1)

Use this menu to manually enter the URL address of a

website and access the website.

Use this menu to create and send SMS, MMS, or

e-mail messages.

Text message (Menu 5.1.1)

WAP profile (Menu 4.4)

Short Message Service (SMS) allows you to send or

receive text messages that may include pictures,

animated images, and melodies.

Use this menu to select a connection profile for

accessing the WAP browser.

You can edit a profile using the Connection

The maximum number of characters allowed in a

text message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

settings menu.ꢀp. 87

Clear cache (Menu 4.5)

Use this menu to clear the cache, a temporary

memory that stores recently accessed web pages.

1. Enter your message.

2. Press <Options> to access one of the following

options:

Messages (Menu 5)

•

Save and send: both save a copy of the

message and send the message.

Send only: send the message.

Insert: add a template, Phonebook entry, or

bookmark.

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use WAP push message, and cell broadcast

message features.

•

Add picture/animation/melody: attach a

To access this menu, press <Menu> in Idle mode and

picture, animated image, or melody.

select Messages

Menu functions

•

Attach: attach a name card or calender data

as a data format attachment.

2. Select the Picture&Video or Sound line and add

an image, a video, or a sound file.

Save to: save the message in the Drafts box

or one of the folders you have created.

Language select: change the language used

in T9 input mode.

Text style: change the text attributes.

Input method: change the text input mode.

The maximum size allowed for an MMS message

can differ depending on the country. If you

cannot attach another file, add another page.

3. Select the Message line and enter the message

•

text.

4. Press <Options> to access the following options:

3. When you have finished, press <Options> and

select Save and send or Send only

•

Add: add a subject or text to your message.

Edit: edit the subject or text of your message.

Add image/video/sound: add photos, videos,

or sounds to the message. Depending on the file

type or DRM (Digital Rights Management) system,

4. Enter a destination number.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

some files may not be able to be forwarded

5. Press [ ] to send the message.

•

Change image/video/sound: change an

added item.

Preview: display the message you have

created.

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

•

Send: send the message.

Save to: save the message in the Drafts box

or one of the folders you have created.

1. Select the Subject line and enter the message

subject.

•

Add page: add pages. Move to each page by

pressing [Left] or [Right] on the message

screen.

Delete page: delete an added page.

Edit page: change the duration of page display

or move the page forward.

Attach: attach a name card or calender data

as a data format attachment.

Clear subject/message: clear the subject or

Email (Menu 5.1.3)

You can send e-mails that include text, audio, and

images. To use this feature, you need to subscribe to

an e-mail service and set up your e-mail account and

•

profile.ꢀp. 61, p. 62

1. Select the Subject line and enter the subject of

•

your e-mail.

2. Select the Message line and enter the e-mail text.

3. Press <Options> to add multimedia files by

selecting the following options in the File attach

line:

text.

Remove media/sound: remove an added

item.

•

Add image/video/sound/musics: add items

5. When you have finished, press <Options> and

select Send

stored in the phone’s memory. Depending on

the file type or DRM (Digital Rights Management)

system, some files may not be able to be

6. Enter a phone number or e-mail address.

forwarded

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

•

Other files: add files in a format which your

phone does not support.

Attach: attach a name card or calender data

as a data format attachment.

7. Press [ ] to send the message.

Menu functions

4. When you have finished, press <Options> to

7. Press [ ] to send the e-mail.

access the following options:

My messages (Menu 5.2)

Options may vary depending on the selected

field.

Use this menu to store all of the messages you have

received, sent, or failed to send.

•

Edit: edit the subject or text.

View Play: display/play an added item.

Send: send the e-mail.

Save to: save the message in the Drafts box

or one of the folders you have created.

Inbox (Menu 5.2.1)

This folder stores all of the messages you have

received, except for e-mails.

Viewing a message at the time of its receipt

•

Remove subject/message: clear the subject

or text.

Remove attachment: delete the selected

attachment.

Remove all attachment: delete all

attachments.

When a message has been received, the phone alerts

you by:

•

Displaying a message icon with text notification

Sounding a tone or vibrating, depending on the

message alert setting.

To read a message immediately, press <View> and

select a message from the Inbox.

5. When you have finished, press <Options> and

select Send

6. Enter an e-mail address.

For an MMS message, press <Options> and select

Retrieve. The message is downloaded from the MMS

server to the phone’s memory.

To send the e-mail to more than one recipient,

press [Down] and fill in additional destination

fields.

While viewing the message list, press <Options> to

access the following options:

Viewing a message in Inbox

The following icons may appear on the message list;

depending on the message type or status, icons may

vary:

Options may vary depending on your country or

service provider.

•

SMS

•

View: open the message.

MMS

Retrieve: retrieve the MMS message from the

server.

MMS notification;

being retrieved from the server and

indicates that retrieval has failed

indicates that an MMS is

•

Delete: delete the message.

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

•

WAP push messages/OTA messages

CB messages

Delivery report for your sent messages

•

Sort by: change the sort order of the messages.

Protection: protect the message from being

deleted.

• According to the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

Using message options

They are indicated by

While viewing a message, press <Options> to access

the following options:

• A ! icon next to a message means that a

message is of high priority. A grey-coloured

message icon is of low priority.

SMS messages

•

Reply: reply to the sender.

Forward: forward the message.

Menu functions

•

Delete: delete the message.

Move to phone SIM: move the message between

the SIM card and the phone’s memory.

•

Protection: protect the message from being

deleted.

•

Properties: view the message properties.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

OTA messages

•

Install: apply the configuration specified in the

message to your phone.

Cut media: save media content from the message

into your phone’s memory.

•

Delete: delete the message.

Protection: protect the message from being

deleted. You can protect only messages stored in

the phone’s memory.

Protection: protect the message from being

deleted.

WAP push messages

MMS messages

•

Go to URL: connect to the URL specified in the

message.

•

Reply via SMS: send a reply message via SMS.

Reply via MMS to: send a reply message via

MMS.

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

•

Forward: forward the message to another person.

•

Delete: delete the message.

Delete: delete the message or all messages.

Protection: protect the message from being

deleted.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

CB messages

•

Cut media: save media content from the message

into your phone’s memory.

•

Save: save the message to the phone’s memory.

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

•

Delete: delete the message.

Outbox (Menu 5.2.3)

This folder stores messages that the phone is

attempting to send or has failed to send.

Delivery report messages

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

In this folder, the following icons are available:

•

Delete: delete the message.

•

Message that the phone is sending

Protection: protect the message from being

deleted.

Message that the phone has failed to send

While viewing a message or the message list, press

<Options> to access the following options:

Drafts (Menu 5.2.2)

•

View: display the message.

This folder stores messages you have saved to send at

a later time.

•

Delete: delete the message or all messages.

Press <Options> to access the following options:

•

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

•

Edit: edit the message.

Delete: delete the message or all messages.

•

Sort by: change the sort order of the messages.

Send again: send the message.

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

Forward: forward the message to other people.

•

Sort by: change the sort order of the messages.

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

Protection: protect the message from being

deleted.

•

Protection: protect the message from being

deleted.

•

Properties: view the message properties.

Menu functions

•

Properties: view the message properties.

Email box (Menu 5.2.5)

This folder stores e-mails that you have received.

1. Select an e-mail account.

Sent (Menu 5.2.4)

This folder stores messages that you have sent.

2. Press <Yes> when Check new Email is displayed

While viewing a message or the message list, press

to get new mails from the server.

Options> to access the following options:

View: open the message.

The phone checks for new e-mails and retrieves

received e-mails.

•

Send: send the message.

The following icons may appear on the message

list; depending on the e-mail status, icons may

vary:

•

Delete: delete the message or all messages.

•

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

•

has been read

has not been read

has been retrieved from the server

has not been retrieved;

•

Sort by: change the sort order of the messages.

Forward: forward the message to other people.

indicates that

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

an e-mail is being retrieved from the

server and

failed

indicates that retrieval has

•

Protection: protect the message from being

deleted.

! icon next to a message means that a

message is of high priority. A grey-

Properties: view the message properties.

coloured message icon is of low priority.

3. Scroll to an e-mail or header and press [ ].

•

Add to filtering list: add the sender’s e-mail

address to the filter list to reject e-mails from that

address.

4. If the e-mail has more than one page, press [

to scroll through pages one by one.

]

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

Press [Left] or [Right] to move to the first or last

page.

Cut media: save media content from the message

to your phone’s memory.

5. Select an attached file to view or play it.

While viewing the e-mail content or message list,

press <Options> to access the following options:

Check new Email: check the Email box for new

e-mails.

Options may vary depending on the status of the

e-mail.

•

Protection: protect the e-mail from being deleted.

Properties: view the properties of the e-mail.

•

View: open the selected item.

My folders (Menu 5.2.6)

Retrieve: retrieve one or all of the e-mails from

the e-mail server.

Use this menu to create new folders and store and

organise your messages.

•

Reply: send a reply to the sender or to all of the

other recipients.

Creating a new folder

1. Press <Yes>.

•

Forward: forward the e-mail.

2. Enter a folder name and press <OK>.

3. To add more folders, press <Options> and select

Delete: delete the currently selected item.

Move to My folder: move the e-mail to one of the

folders you have created in the My folders menu.

Add folder

4. Repeat step 3 as desired.

Menu functions

•

Delete: delete the template.

Using folder options

Add new: add a new template.

On the folder list, press <Options> to access the

following options:

Delete all (Menu 5.4)

•

Open: open the folder.

Use this menu to delete messages in each message

folder one by one, or all at once. You can also delete

all messages in all folders at one time.

Add folder: add a new folder.

Rename folder: change the name of the folder.

Delete: delete the selected folder.

Settings (Menu 5.5)

Templates (Menu 5.3)

Use this menu to set up various options for using the

messaging service.

Use this menu to make and use templates of

frequently used messages.

Text message (Menu 5.5.1)

Creating a text template

1. Select an empty location.

You can configure default SMS settings for sending or

receiving messages.

2. Enter a message and press <OK>.

•

Send settings: set up the following options for

sending a text message:

Using template options

From the template list, press <Options> to access

Reply path: allow the recipient to reply to you

the following options:

through your message centre.

•

Edit: edit the template.

Delivery report: set the network to inform you

when your message has been delivered.

Send message: send a new message using the

template.

Character support: select a character encoding

type. If you select Automatic, the phone switches

the encoding type from GSM-alphabet to Uni-

code if you enter a Uni-code character. Use of

Uni-code encoding will reduce the maximum

number of characters in a message to about half. If

this menu is not shown, your phone provides the

Automatic character encoding by default.

Default validity: set the length of time your

messages are stored in the SMS centre while

attempts are made to deliver them.

Setting name: enter a profile name.

Multimedia message (Menu 5.5.2)

You can configure default MMS settings for sending or

receiving messages.

•

Send settings: set up the following options for

sending a multimedia message:

Bearer selection: select either GSM or GPRS

preferred, depending on your network.

Delivery report: set the network to inform you

when your message has been delivered.

•

Current profile: select a profile.

Profile settings: set the following properties in a

Hide address: set your address to be hidden from

profile:

the recipient’s phone.

Service centre: store or change the number of

Read reply: determine whether or not the phone

your message centre.

sends a read-reply request.

Default destination: enter the default

destination. It will be displayed in the first field on

the Recipients field.

Priority: set the priority level of your messages.

Expiry date: set the length of time your messages

are stored in the message centre.

Default type: set the default message type. The

network can convert the messages into the

selected format.

Delivery time: set a time delay before messages

are sent.

Menu functions

Outgoing message size: select a maximum size

of attached items allowed for an MMS message.

•

Reject: the phone rejects all messages.

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

•

Retrieve settings: set up the following options

for receiving a multimedia message:

•

Profile: select a connection profile to be used for

MMS.

Reject unknown sender: reject messages from

unknown senders.

You can edit a profile using the Connection

Advert allowed: accept advertisements.

settings menu.ꢀp. 87

Information allowed: accept information

messages.

Email (Menu 5.5.3)

Personal allowed: accept personal messages.

You can configure default network settings that are

required to send or receive e-mails.

Report allowed: send a delivery report from the

network to the sender.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

Home reception: determine if your phone

retrieves new messages automatically when you

are in your home service area.

•

Send settings: set up the following options for

sending an e-mail:

Roaming reception: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

Delivery report: set the network to inform you

when your e-mail has been delivered.

Reply to address: set the network to send a

request for a reply along with your e-mail to the

recipient.

Home reception and Roaming reception have

the following options:

•

Automatic: the phone automatically retrieves

Priority: select the priority level of your e-mail.

messages from the server.

Include signature: attach your name, phone

number, a simple memo, or a tag line to your

e-mail.

Leave a copy of messages on the server: leave

copies of e-mails after retrieving.

•

Block list: specify e-mail addresses from which

messages will not be accepted. You can also

specify message subjects that you will not accept.

Edit name: edit the name in your signature.

Edit telephone number: edit the phone number

in your signature.

Email account: set up an e-mail account and

select an account to be used.

Edit note: edit the tag line in your signature.

Current account: select an account.

•

Receive settings: set up the following options for

receiving an e-mail:

Account settings: configure up to five e-mail

accounts using different e-mail servers. The

following options are available for each account:

Check interval: determine how often the phone

checks the server for incoming e-mails.

•

Account name: enter a name for the currently

selected account.

User name: enter a user name.

Email address: enter your e-mail address.

User ID: enter your e-mail ID.

Password: enter your e-mail password.

SMTP server: enter the IP address or domain

name of the outgoing e-mail server.

SMTP port: enter the SMTP port number.

If you set this option to Do not notify, you can

use the Check new Email feature to check your

e-mail manually.

•

Read reply: determine whether or not the phone

sends a read-reply request.

When this option is set to Announce, the phone

reminds you to send a read-reply request with

your e-mail address.

•

Reject if larger than: determine the maximum

size for incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

Menu functions

•

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

•

Email profile: select a connection profile to be

used for e-mail services.

You can edit a profile using the Connection

The following options are available when the

protocol type is POP3

settings menu.

ꢀp. 87

Push message (Menu 5.5.4)

•

POP3 server: enter the IP address or domain

You can change the settings for receiving WAP push

messages from the wireless web server. The following

options are available:

name of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

APOP login: connect to the server by using

the APOP login scheme when this option is

selected.

•

Receive: set how your phone receives push

messages.

•

Service centre: enter the address of the server

from which you want to receive push messages,

when the Receive option is set to SMS-C

These options are available when the protocol type

is IMAP4

•

IMAP4 server: enter the IP address or domain

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

Include attachments: select this option to

receive attachments with e-mails.

specific

Broadcast (Menu 5.5.5)

•

You can change the settings for receiving CB

messages. The following options are available:

•

Email retrieval limit: set the number of

headers you will retrieve from the server.

•

Receive: select the reception of CB messages.

Channel list: indicate the channels from which

you wish to receive CB messages. Please contact

your service provider for further details.

•

Language: select the preferred language in which

broadcast messages display.

Viewing an image

1. Select an image folder.

2. Scroll to an image and press [ ].

Memory status (Menu 5.6)

Using image options

Use this menu to view the maximum memory and

available memory for each message type. You can also

view the memory currently in use in each folder.

While viewing an image or the image list, press

<Options> to access the options.

ꢀp. 72

Videos

File manager (Menu 6)

The File manager menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory.

This menu displays video clips you have recorded,

downloaded, or received in messages.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

To access this menu, press <Menu> in Idle mode and

Playing a video clip

1. Select a video folder.

select File manager

According to the DRM (Digital Rights Management)

system, web content may not be able to be

2. Scroll to a clip and press [ ].

ꢀp. 76

forwarded. The content is indicated by

Using video options

While viewing the video list, press <Options> to

access the options.

Images

This menu displays photos you have taken and images

downloaded or received in messages.

•

Play: play the video clip.

Menu functions

•

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

Playing a music file

Scroll to a file and press [ ].

ꢀp. 38

•

Set as wallpaper: set the video clip, if saved for

adding to MMS messages or e-mails, as your

wallpaper for the idle screen.

Using music options

While viewing the music list, press <Options> to

access the following options:

•

Delete: delete the video clip.

•

Play: begin playback.

Rename: change the name of the video clip.

Send via: send the file via e-mail or Bluetooth.

Add to playlist: add a file to the play list.

Move to Favourite videos: move the file to the

Favourite videos folder.

Set as: set the file as your ring tone or as a caller

alert melody for a Phonebook entry.

•

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

•

Delete: delete the selected file or all files.

•

Protection: protect the video clip from being

deleted.

Rename: change the file name.

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

Properties: view the properties of the video clip.

Music

•

Protection: protect the file from being deleted.

This menu displays MP3 files you have downloaded,

received in messages, or imported from your

computer.

Properties: view the properties of the file.

Sounds

This menu displays sound files you have recorded,

downloaded, or received in messages.

Playing a sound clip

Other files

1. Select a sound folder.

2. Scroll to a clip and press [ ].

Files that you have received but which are not

supported by your phone are stored in this folder. You

cannot open these files on the phone. Unsupported file

formats include *.doc, *.ppt, and *.txt.

Using sound options

While viewing the sound list, press <Options> to

access the following options:

While viewing the file list, press [ ] to access the

following options:

•

Play: play the sound file.

•

Send via: send the file via e-mail, or Bluetooth.

Delete: delete the selected file or all files.

Rename: change the file name.

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Set as: set the file, if downloaded, as your ring

tone or as a caller alert melody for a Phonebook

entry.

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

•

Delete: delete the selected file or all files.

•

Protection: protect the file from being deleted.

Rename: change the file name.

Properties: view the properties of the file.

Move to Favourite sounds: move the file to the

Favourite sounds folder.

Memory status

•

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

•

Protection: protect the file from being deleted.

Properties: view the properties of the file.

Menu functions

•

Go to: go to the current date or enter a specific

date.

Calendar (Menu 7)

The calendar feature enables you to keep track of your

schedule and to-do list, to view missed alarm events,

and to make a memo.

•

Sort by: sort items by the type of event.

Delete: delete event(s) stored on the calendar.

You can only delete scheduled event with a

repeating alarm on Day view.

To access this menu, press <Menu> in Idle mode and

select Calendar

•

Missed alarm events: view events whose alarms

you have missed.

Consulting the calendar

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

blue box.

Memory status: view the memory status for

items stored in the phone’s memory.

Creating an event

The number of events for the specific day appears at

the bottom of the calendar. The following icons

indicate the type of event:

You can schedule up to 400 events on the calendar,

and schedule more than one event per day.

•

Scheduled event

To-do item

•

Anniversary

Memo

Entering a new scheduled event

1. Scroll to a date on the calendar.

2. Press <Options> and select Create

→

Schedule.

Press <Options> to access the following options:

3. Enter information or change the settings in the

following entry fields:

•

View mode: change the view mode of the

calendar.

•

Subject: enter the title of the event.

•

Create: add a new event.

•

Details: enter event details.

Start date and Start time: enter the starting

date and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

Location: enter information about the event

location.

Alarm: set an alarm for the event.

Before: set how long before the event the

alarm is to alert you.

Alarm tone: select an alarm tone.

Repeat: select to set the event to recur and a

repeat unit.

Until: if the event will recur, set the ending

date.

Entering a new anniversary

1. Select a date on the calendar.

2. Press <Options> and select Create

→

•

Anniversary

3. Enter information or change the settings in the

following entry fields:

•

Occasion: enter information about the

anniversary.

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

•

Before: set how long before the event the

alarm is to alert you.

Alarm time: enter the time for the alarm to

sound.

AM/PM: select AM or PM in 12-hour time

format.

•

Alarm tone: select an alarm tone.

Repeat every year: select to set the phone to

remind you of the anniversary every year.

4. Press <Save> to save the event.

Menu functions

1. Select a date on the calendar to display the events

for the day.

Entering a memo

1. Select a date on the calendar.

2. Press <Options> and select Create

3. Enter a memo and press <Save>.

2. Select an event to view its details.

→

Memo.

While viewing an event or the event list, press

Options> to access the following options:

View: display the event details.

Edit: edit the event.

Entering a to-do item

1. Select a date on the calendar.

2. Press <Options> and select Create

•

To do

•

Create: add a new event.

3. Enter information or change the settings in the

following entry fields:

•

Send via: send the event via SMS, MMS,

e-mail, or Bluetooth.

•

To do: enter information about the item.

Start date: enter the starting date.

Due date: enter the ending date.

•

View mode: change the view mode of the

calendar.

•

Sort by: sort items by the type of event.

Select priority: select a priority level.

Delete: delete event(s) stored on the calendar.

4. Press <Save> to save the event.

Missed alarm events: view events whose alarms

you have missed.

Viewing an event

•

Memory status: view the memory status for

items stored in the phone’s memory.

Square brackets on a calendar date indicate the

following type of events scheduled for that day:

•

Blue: scheduled event

Red: to-do item

•

Orange: anniversary

Green: memo

Viewing an event in different mode

Viewing a missed alarm event

By default, the calendar appears in Month view mode.

When you are unable to acknowledge an alarm, the

phone displays a missed alarm notification.

Press <Options> and select View mode to change

the mode.

•

Press <View> to view the corresponding event.

Press <Exit>.

Day view

You can view events for the selected date.

Select an event to view its details.

Accessing missed alarm event

1. Press <Options> and select Missed alarm

events

The following icons will be displayed according to the

event’s type and states:

2. Select an event.

3. Press <Confirm> to confirm and delete the event.

•

Alarm set

Recurring event

Completed to-do

Using missed alarm options

From the event list, press <Options> to access the

following options:

To-do priority; its colour indicates the priority

level (Red: high, Blue: normal, and Grey: low)

•

View: display the event details.

Delete: delete the event.

Week view

You can view events (only for items stored for

Schedule) for the selected week.

Delete all: delete all events.

A cell on the timetable indicates the presence of event

information. Select the cell that contains the event you

want.

Menu functions

2. Adjust the image by aiming the camera lens at the

subject.

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

•

Press the left soft key to access the camera

options.

To access this menu, press <Menu> in Idle mode and

select Camera, or press and hold [

•

Use the keypad to change the camera settings

or switch to other modes.

3. Press [ to take a photo. The photo is saved in

the Photos folder.

ꢀp. 71

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

]

4. To

Press

Options>.ꢀp. 72

use photo options

delete the photo

[C] and then <Yes>.

Taking a photo

return to Capture mode

<Preview>.

You can take photos in various modes using the

phone. The camera produces JPG photos.

Using camera options in Capture mode

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

In Capture mode, press the left soft key to access the

following options:

•

Record video: switch to Record mode.

1. Access the Camera menu to turn on the camera.

Shooting mode: take a photo in the following

modes:

The image to be captured appears on the display.

Single shot: take a photo in normal mode.

Shutter sound: select the sound that you hear

when you press the shutter release, [

Multi shot: take a series of action stills. Select the

number of photos the camera will take and the rate

at which the photos are taken.

•

Short cuts: view the functions of the keys you can

use.

Mosaic shot: take several stills and save them in

one frame. Select the number of still images the

camera will take and whether the camera shutter

is released automatically or manually.

Using the keypad in Capture mode

You can use the keypad to customise your camera

settings in Capture mode.

Key

Function

•

Effects: change the colour tone or apply a special

effect to photos to be taken in normal mode.

Flips the image vertically.

Shows the mirror image.

Adjusts the brightness of the image.

Frames: apply a decorative frame to photos to be

taken in normal mode.

Left/

Right

•

Flash: determine the flash use.

Timer: set a time delay before the camera takes a

photo.

Up/

Zooms in or out.

•

Go to photos: go to the Photos folder.

Down

Settings: change the default settings for taking a

photo.

Switches to Record mode.

ꢀp. 73

Changes the image size.

Size: select an image size.

Changes the image quality.

Quality: select an image quality setting.

Viewfinder mode: select a preview screen.

Menu functions

•

Set as: set the photo as your wallpaper for the

displays or as a caller ID image for a Phonebook

entry.

Key

Function

Changes the camera mode.

•

Delete: delete the photo.

Changes the colour tone or applies a special

effect to the photo.

Rename: change the name of the photo.

Go to photos: go to the Photos folder.

Protection: protect the photo from being deleted.

Properties: view the properties of the photo.

Reduces the distortion on the image to

maximise detail and sharpness.

Selects a decorative frame.

Sets the timer.

Viewing a photo

1. In Capture mode, press the left soft key and select

Goes to the Photos folder.

Determines the flash use.

Changes the preview screen.

Go to photos

2. Scroll to a photo and press [ ].

While viewing a photo or the photo list, press

Options> to access the following options:

List: return the screen to the photo list.

View: view the photo on the full screen.

Using photo options

•

After taking a photo, press <Options> to access the

following options:

•

Send via: send the photo via MMS, e-mail, or

Bluetooth.

•

Take another: return to Capture mode.

Send via: send the photo via MMS, e-mail, or

Bluetooth.

•

Set as: set the photo as your wallpaper for the

displays or as a caller ID image for a Phonebook

entry.

•

Delete: delete the photo.

•

: adjusts the brightness of the image.

: zooms in or out.

Rename: change the name of the photo.

To turn the flash on or off, press and hold [

5. Press [ to take a photo. The photo is

Move to Favourite images: move the photo to

the Favourite images folder.

]

automatically saved in the Photos folder.

•

Slide show: display all photos in turn as a slide

show. You can select the rate at which the photos

cycle.

Recording a video

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

You can record a video of what is displayed on the

camera screen and save it.

1. In Capture mode, press [1].

•

Protection: protect the photo from being deleted.

2. Aim the camera lens at the subject to adjust the

image.

Properties: view the properties of the photo.

•

Press the left soft key to access the camera

options.

Use the keypad to change the camera settings

Taking a photo with the phone closed

1. Press and hold [

2. If necessary, press [ ] to display

•

or switch to other modes.ꢀp. 74

3. Adjust the image by aiming the camera lens at the

subject.

3. Press [

4. Press [

]

to start recording.

or the right soft key to stop recording.

4. To change image settings, press [ ] until the

setting icon you want appears and then press [ ]:

The video is automatically saved in the Video

clips folder.

•

: flips the image vertically.

Menu functions

Recording mode: select a video recording mode.

5. To

Press

Select Limit for message to record a video

suitable for an MMS or e-mail message. The video

clip is saved in 3GP format.

play back the video clip

use video options

delete the video clip

return to Record mode

[

<Options>.ꢀp. 75

Select Normal to record a video within the limit of

the currently available memory.

[C] and then <Yes>.

<Preview>.

Size: select a frame size.

Video quality: select an image quality setting.

Screen mode: select a preview screen.

Audio record: record audio with a video clip.

Using camera options in Record mode

In Record mode, press the left soft key to access the

following options:

•

Short cuts: view the functions of the keys you can

use.

•

Take photo: switch to Capture mode.

Effects: change the colour tone or apply a special

effect to a video.

Using the keypad in Record mode

You can use the keypad to customise your camera

settings in Record mode:

•

Flash: determine the flash use.

Timer: set a time delay before the camera starts

Keys

Function

recording.

•

Go to videos: go to the Video clips folder.

Flips the image vertically.

Shows the mirror image.

Settings: change the following settings for

recording a video:

Keys

Function

Keys

Function

Left/

Adjusts the brightness of the image.

Changes the preview screen.

Right

Using video options

Up/

Down

Zooms in or out.

After recording a video clip, press <Options> to

access the following options:

Switches to Capture mode.

ꢀp. 70

•

Record another: return to Record mode.

Changes the frame size.

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

Changes the image quality.

•

Set as wallpaper: set the video clip, if saved for

adding it to MMS messages or e-mails, as your

wallpaper for the idle screen.

Changes the video recording mode.

Changes the colour tone or applies a special

effect to the video image.

•

Delete: delete the video clip.

Reduces the distortion on the image to

maximise detail and sharpness.

Rename: change the name of the video clip.

Go to videos: go to the Video clips folder.

Mutes or unmutes the audio.

Sets the timer.

Protection: protect the video clip from being

deleted.

•

Properties: view the properties of the video clip.

Goes to the Video clips folder.

Determines the flash use.

Menu functions

•

Set as wallpaper: set the video clip, if saved

for adding it to MMS messages or e-mails, as

your wallpaper for the idle screen.

Delete: delete the video clip.

Rename: change the name of the video clip.

Move to Favourite videos: move the video

clip to the Favourite videos folder.

Share for bluetooth: set whether or not to

prevent this file from being accessed from

other Bluetooth devices.

Playing a video clip

1. In Record mode, press the left soft key and select

Go to videos

•

2. Scroll to a video clip and press [ ].

During playback, use the following keys on the

display:

Keys

Function

•

Pauses/resumes playback.

Stops playback.

Down

Left

Right

•

Protection: protect the video clip from being

deleted.

Properties: view the properties of the video

clip.

Skips backward through a file.

Skips forward through a file.

Adjusts the volume.

Recording a video with the phone closed

1. Press and hold [

2. If necessary, press [ ] to display

3. Press <Options> to access the following options:

•

List: return to the video clip list.

Send via: send the video clip via MMS, e-mail,

or Bluetooth.

3. Adjust the image by aiming the camera lens at the

subject.

4. To change image settings, press [ ] until the

setting icon you want appears and then press [ ]:

•

: flips the image vertically.

: adjusts the brightness of the image.

: zooms in or out.

•

AM/PM: select AM or PM in 12-hour time format.

Time format: select time format.

Set date: enter the current date.

To turn the flash on or off, press and hold [

Starting day of calendar: set which day of the

5. Press [

6. Press [

]

to start recording.

to stop recording. The video clip is

week the calendar starts with.

Phone settings (Menu 9.2)

automatically saved in the Video clips folder.

Many different features of your phone’s system can be

customised to suit your preferences.

Settings (Menu 9)

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

Language (Menu 9.2.1)

Use this menu to select one of several languages for

the display text.

To access this menu, press <Menu> in Idle mode and

Greeting message (Menu 9.2.2)

select Settings

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

Time & Date (Menu 9.1)

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World time menu.

Short cut (Menu 9.2.3)

You can use the Navigation keys as shortcut keys to

access specific menus directly from Idle mode. Use

this menu to assign a shortcut to a key.

ꢀp. 44

•

Set time: enter the current time.

Menu functions

Assigning a shortcut menu

•

Anykey answer: answer an incoming call by

pressing any key, except [ ] or <Reject>.

1. Select a key to be used as a shortcut key.

2. Select the menu to be assigned to the key.

Using shortcut options

When this option is not selected, you must press

[

] or <Accept> to answer a call.

Press <Options> to access the following options:

Display settings (Menu 9.3)

•

Change: assign or change a shortcut menu.

Use this menu to change settings for the display and

light.

Remove: deactivate the shortcut assignment to

the selected key.

Wallpaper (Menu 9.3.1)

•

Remove all: deactivate all shortcut assignments.

You can set up the idle screen on both displays.

Extra settings (Menu 9.2.4)

•

Main display: select an image or video clip to be

displayed on the main display.

You can turn the automatic redialling or answering

feature on or off.

Cover display: select an image to be displayed on

the external display.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

Text position: select a text position on the

display. If you don’t want to display text in Idle

•

Active folder: answer an incoming call by opening

the phone.

mode, select Off

•

Text mode: select a text mode.

Text colour: select the text colour.

•

Graphic logo: set the phone to display the service

provider’s logo instead of its name, if you have

downloaded it.

Dialling font colour (Menu 9.3.5)

Use this menu to select the font colour when entering

a phone number for dialling.

Skin (Menu 9.3.2)

Sound settings (Menu 9.4)

You can select a skin colour for Menu mode.

Use this menu to customise various sound settings.

Incoming call (Menu 9.4.1)

LCD brightness (Menu 9.3.3)

You can adjust the brightness of the display for

varying lighting conditions.

Use this menu to select a volume and alert type for

incoming calls.

Back light (Menu 9.3.4)

•

Ringtone: select a ring tone for the call ringer.

You can select the length of time the backlight stays

on and the display is on in Dim mode, in which the

backlight is off.

Volume: select a ringer volume.

Alert type: specify how you are to be informed of

incoming calls.

•

Main LCD on: select the length of time the

backlight is on.

Melody: the phone rings using the selected ring

tone.

•

Main LCD dim: select the length of time the

display is in Dim mode after the backlight turns off.

After a specified time, the display turns off.

Vibration: the phone vibrates but not rings.

Vibration then melody: the phone vibrates three

times and then starts ringing.

•

Show cover indicators: set whether or not the

cover display icons are shown on the external

display.

Menu functions

Keypad tone (Menu 9.4.2)

Quiet mode (Menu 9.4.6)

Use this menu to select the tone that the phone

sounds when you press a key.

Use this menu to set how the phone acts to alert you

to a specific event in Quiet mode, instead of making

sounds.

You can adjust the keypad tone volume using

•

Vibration: set the phone to vibrate.

[

]

in Idle mode.

Mute: mute all sound settings.

Message tone (Menu 9.4.3)

Extra tones (Menu 9.4.7)

Use this menu to set up the ringer for incoming SMS

messages, MMS messages, e-mails, and CB

messages.

Use this menu to customise additional tones for the

phone.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

Tone: select one of several message tones.

Alert type: specify how you are to be informed of

any incoming messages.

•

Connection tone: set the phone to beep when it

is connected to the system.

•

Repetition: specify how often the phone informs

you of a new message.

Alert on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

Power on/off (Menu 9.4.4)

Use this menu to select the melody that the phone

sounds when it is switched on or off.

•

Error tone: set the phone to beep when you have

made a mistake or something wrong happens on

the phone.

Folder tone (Menu 9.4.5)

Use this menu to select the tone that the phone

sounds when you open or close the phone.

4. Move to the Divert to line.

Network services (Menu 9.5)

5. Enter the number to which calls are to be diverted

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

and press <Select>.

6. If you selected No reply, move to the Seconds

line and select the length of time the network

delays before diverting a call.

Call diverting (Menu 9.5.1)

This network service reroutes incoming calls to a

phone number that you specify.

Call barring (Menu 9.5.2)

This network service allows you to restrict your calls.

1. Select a call barring option:

1. Select a call diverting option:

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

•

All outgoing: prohibit all outgoing calls.

International: prohibit international calls.

International except to home: only allow

calls to numbers within the current country.

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

•

No reply: divert calls when you do not answer

the phone.

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

Cancel all: cancel all call diverting options.

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

2. Select the type of calls to be diverted.

3. To activate call diverting, select Activate

Otherwise, select Deactivate

Menu functions

•

Change barring password: change the call

barring password obtained from your service

provider.

Network selection (Menu 9.5.4)

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area.

2. Select the type of calls to be barred.

3. Select Activate. To deactivate call barring, select

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

Deactivate

4. Enter the call barring password supplied by your

service provider and press <Select>.

•

Automatic: connect to the first available network

when roaming.

Call waiting (Menu 9.5.3)

•

Manual: select the network you want.

This network service informs you when someone is

trying to reach you while you are on another call.

Caller ID (Menu 9.5.5)

1. Select the type of calls to which call waiting option

will apply.

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

2. Select Activate and press <Select>.

To deactivate call waiting, select Deactivate

•

Default: use the default setting provided by the

network.

Hide number: ensure your number does not

display on the other person’s phone.

Send number: send your number each time you

make a call.

•

Outside access: enable calls to numbers other

than those in the Closed user group. This feature

depends on the nature of your CUG subscription.

Voice mail server (Menu 9.5.6)

Use this menu to store the number of the voice mail

server and access your voice mails.

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

You must enter the voice server number before you

can access your voice mails. Your service provider

can give the voice server number.

•

Connect to voice server: connect to the voice

mail server to allow you to listen to your

messages. You can also connect to the voice mail

•

Deactivate: deactivate the CUG function, if the

default group is enabled or a CUG index is

selected.

server by pressing and holding [1] in Idle mode.

Voice server number: enter the voice mail

server number.

Bluetooth (Menu 9.6)

Use this menu to activate the Bluetooth feature.

Closed user group (Menu 9.5.7)

• You cannot use the Bluetooth feature while using

multimedia features such as voice recorder,

camera, and MP3 player, or vice versa.

• Some devices may not be compatible with your

phone.

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group, contact your

service provider.

•

Index list: add, delete, or activate CUG index

numbers. Press <Options> to access the options

for setting up an index list.

Menu functions

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

Bluetooth services: display available Bluetooth

services.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

devices

Setting up the Bluetooth feature

2. Select Search new device

The Bluetooth menu provides the following options:

If you have searched for devices before, the phone

displays More devices along with the devices you

have searched for previously. To search for new

•

Activation: activate or deactivate the Bluetooth

feature.

devices, select More devices

My devices: search for connectable Bluetooth

devices.

After searching, a list of devices to which you can

connect displays. The following icons indicate the

kind of device:

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

•

Hands-free or

headset

•

Mobile phone

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

•

Computer

Printer

•

PDA

Unknown device

The colour of the icon indicates the status of the

the device:

3. Press <Options> to access the following options:

Options may vary depending on the paired

device.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

•

Connect: connect to the currently selected

device.

Disconnect: end the connection with the

device.

Browse files: search for data from the device

and import data directly to your phone.

Service list: refresh the Bluetooth service list.

Rename: rename the paired device.

3. Select a device.

4. Enter a Bluetooth PIN code and press <OK>. This

code is used just once and you don’t need to

memorise it.

•

When the owner of the other device enters the

same code, pairing is complete.

Authorise/Unauthorised device: determine

whether or not the phone asks you to permit

connection when other devices try to connect

to your phone.

Some devices, especially headsets or hands-free

car kits, may have a fixed Bluetooth PIN, such as

0000. If the other device has a code, you must

enter it.

•

Delete: remove the device from the device list.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

Using device options

1. From the device list, scroll to a device you want.

2. Select the application in which the item you want

to send is stored.

2. If your phone didn’t find Bluetooth services for the

selected device, press <Select>.

Menu functions

3. Scroll to the item you want and press <Options>.

If you enter an incorrect PIN /PIN 2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

network operator.

4. Select Send via

→

Bluetooth.

The phone searches for devices within range and

displays a list of available devices.

5. Select a device.

6. If necessary, enter the Bluetooth PIN needed for

PIN check (Menu 9.7.1)

pairing and press <OK>.

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

Receiving data via Bluetooth

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

Change PIN (Menu 9.7.2)

If an unauthorised Bluetooth device sends data to your

phone, the phone displays a confirmation message. To

receive data, press <Yes>.

Use this menu to change your PIN. The PIN check

feature must be enabled to use this feature.

Phone lock (Menu 9.7.3)

Security (Menu 9.7)

This feature locks the phone from unauthorised use.

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

The password is preset to 00000000. To change the

password, use the Change password menu.

Change password (Menu 9.7.4)

Change PIN2 (Menu 9.7.8)

Use this menu to change your phone password. The

If supported by your SIM card, the change PIN2

feature changes your current PIN2.

password is preset to 00000000

Privacy (Menu 9.7.5)

Connection settings (Menu 9.8)

Use this menu to lock all menu functions on the

phone, except for call functions.

Use this menu to create and customise the profiles

containing the settings for connecting your phone to

the network. You need these settings to use the WAP

browser or send MMS messages or e-mails.

When this feature is enabled, you must enter the

phone password to access menu functions. The

password is preset to 00000000

Your phone is suited for connecting to the network

by default. If you change the settings without first

checking with your service provider, the WAP, MMS,

and e-mail features may not work properly.

SIM lock (Menu 9.7.6)

The SIM lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

Creating a profile

1. Press <New> and specify following information:

FDN mode (Menu 9.7.7)

•

Profile name: enter a profile name.

Home URL: enter the address of the WAP

homepage of your service provider.

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored in

the SIM card. To use this feature, you must enter your

PIN2.

•

Proxy: activate or deactivate the proxy server.

When this option is activated, the IP address

and Port options are activated.

Menu functions

•

DNS: activate or deactivate the DNS address.

When this option is selected, DNS1 and DNS2

are activated.

Bearer: select the network bearer type.

Advanced settings: change the advanced

options. Depending on the bearer setting,

available options vary.

Using profile options

Press <Options> to access the following options:

•

Edit: edit the profile.

•

Delete: delete the profile.

Add new connection: add a new profile.

Reset settings (Menu 9.9)

When the bearer is set to GPRS

Use this menu to reset the phone settings, display

settings, and sound settings individually. You can also

reset all the settings in your phone at the same time.

APN: enter the access point name.

Password: enter the login password.

1. Press [ ] to check the setting category(ies) to be

reset.

When the bearer is set to GSM

Dial number: enter the PPP phone number.

2. Press <Reset> to reset the marked items.

3. Press <Yes> to confirm the reset.

Password: enter the login password.

4. Enter the phone password and press <OK>.

Data call type: select a call type for data

transmission.

The password is preset to 00000000. You can

change this password.ꢀp. 87

2. Press <Save> to save the profile.

“Enter PUK”

The PIN code has been entered incorrectly three

Solve problems

•

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

Help and personal needs

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

“No service,” “Network failure,” or “Not done”

displays

When you switch on your phone, the following

messages may appear:

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

“Insert SIM card”

•

Be sure that the SIM card is correctly installed.

“Enter password”

You have entered a number but it was not

dialled

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

Be sure that you have pressed [

Be sure that you have accessed the right cellular

network.

“Enter PIN”

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

Be sure that you have not set an outgoing call

barring option.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Solve problems

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

Your correspondent cannot reach you

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

No number is dialled when you re-call a

Phonebook entry

•

Be sure that you are accessing the correct cellular

network.

Use the Contacts list feature to ensure the number

has been stored correctly.

Be sure that you have not set an incoming call

barring option.

•

Re-store the number, if necessary.

Your correspondent cannot hear you speaking

The battery doesn't charge properly or the

phone sometimes turns itself off

•

Be sure that you have switched on the

microphone.

•

Wipe the charging contacts both on the phone and

on the battery with a clean soft cloth.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

If the above guidelines do not help you to

solve the problem, take note of:

The phone starts beeping and “Low battery”

flashes on the display

•

The model and serial numbers of your phone

Your warranty details

•

Your battery is insufficiently charged. Recharge the

battery.

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

The audio quality of the call is poor

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

•

(

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0W/

kg.^*

The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body tis-

sue. The limit incorporates a substantial margin of safety to

give additional protection for the public and to account for any

variations in measurements. The SAR values may vary,

depending on national reporting requirements and the network

band.

The highest SAR value for this model phone was 0.762 W/

kg.

Health and safety information

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

temperatures below 0°C (32°F).

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

Electronic devices

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Health and safety information

Hearing aids

Posted facilities

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Switch off your phone in any facility where posted notices

require you to do so.

Potentially explosive environments

Other medical devices

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

Your physician may be able to assist you in obtaining this

information.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Vehicles

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Emergency calls

Other important safety information

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

•

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

•

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

•

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

Health and safety information

•

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Care and maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep the phone and all its parts and accessories out of

the reach of small children.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

•

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Calendar • 66

Call cost • 32

Call records

Characters, enter • 23

Conference call • 29

Connection tone • 80

Converter • 46

Creating calendar

anniversaries • 67

memos • 68

scheduled event • 66

tasks • 68

Creating messages

e-mail • 51

language • 77

settings • 78

Diverting, calls • 81

DTMF tones, send • 29

Index

AB mode, text input • 23

Alarm • 44

Answering

dialled • 31

missed • 31

received • 31

E-mails

Call time • 31

Caller group

creating • 34

managing • 34

Caller ID • 82

Calls

call • 26

creating/sending • 51

deleting • 57

setting • 60

viewing • 56

Emergency calls • 95

second call • 27

Anykey answer • 78

Auto redial • 78

MMS • 50

SMS • 49

Backlight time, set • 79

Barring, calls • 81

Battery

answering • 26

barring • 81

diverting • 81

holding • 27

redialling • 25

rejecting • 26

transferring • 28

waiting • 82

FDN (Fixed Dialling Number)

mode • 87

Forwarding

Deleting

charging • 7

e-mails • 57

events • 68

messages • 53

missed alarms • 69

phonebook 36

photos • 73

low indicator • 8

precautions • 92

Biorhythm • 40

Bluetooth

e-mails • 57

MMS messages • 54

SMS messages • 53

Fragrance type • 40

receiving, data • 86

sending, data • 85

settings • 84

Calories • 41

Camera

video clips • 76

Delivery reports, message • 58

Dialled calls • 31

Dialling font colour • 79

Display

Games • 37

Greeting message • 77

options • 70

photos • 70

videos • 73

Broadcast messages • 54

Browser, WAP • 47

CB (Cell Broadcast) messages •

Health and safety • 91

Height/Weight ratio • 41

Calculator • 46

Index

Holding, call • 27

Low battery indicator • 8

Music, downloaded • 64

Muting

key tones • 28

microphone • 28

My name card • 35

resetting • 88

switching on/off • 8

unpacking • 6

Icons, description • 10

Images, downloaded • 63

Inbox, messages

e-mail • 56

Memo, create • 68

Memory status

downloaded items • 65

phonebook 36

Message tone • 80

Messages

Phonebook

copying • 33

deleting • 36

editing • 33

managing • 36

options • 33

Names

entering • 23

searching • 32

Network selection • 82

Network services • 81

MMS • 54

SMS • 52

International calls • 25

Internet, WAP browser • 47

cell broadcast • 54

e-mail • 51

greeting • 77

MMS • 50

SMS • 49

web • 54

speed-dialling • 34

Photos

deleting • 73

taking • 70

viewing • 72

Java world • 37

Outbox, messages • 55

Own number • 35

PIM sync

Minute minder • 80

Missed alarm events • 69

Missed calls • 31

MMS messages

creating/sending • 50

deleting • 54

setting • 59

viewing • 52

MP3 player

Key tone volume • 80

Keypad tones

selecting • 80

sending • 28

creating a profile • 45

starting • 45

PIN, change • 86

PIN2, change • 87

Pink schedule • 42

Power on/off tone • 80

Privacy • 87

Password

call barring • 82

phone • 87

Phone

Language, select • 77

Last number, redial • 25

Locking

care and maintenance •

display • 10

icons • 10

locking • 86

password • 87

Problems, solve • 89

call functions • 87

phone • 86

SIM card • 87

options • 39

playing • 38

Multi-party calls • 29

Received calls • 31

Received messages

e-mail • 56

Recording

videos • 73

voice memos • 43

Redialling

automatically • 78

manually • 25

Resetting phone • 88

Ringer

incoming calls • 79

messages • 80

Road safety • 93

Roaming • 82

Sounds, downloaded • 64

Speed-dial • 34

Stopwatch • 47

Switching on/off

microphone • 28

phone • 8

Voice memos

playing • 43

recording • 43

Voice recorder

playing • 43

recording • 43

Templates • 58

Text input mode, change • 23

Text, enter • 23

Timer • 46

Waiting call • 82

WAP browser

access • 47

bookmarks • 48

cache, clear • 49

Women’s life • 39

World time • 44

Tone

connect • 80

folder • 80

keypad • 80

Safety

information • 91

Security, calls • 86

Sent messages • 56

Shopping list • 42

SIM card

inserting • 7

locking • 87

SMS messages

creating/sending • 49

deleting • 53

viewing • 52

message • 80

minute minder • 80

power on/off • 80

Transferring, calls • 28

Videos

deleting • 76

playing • 76

recording • 73

Voice mail server

connecting • 83

editing • 83

Sound settings • 79

Melissa 670 200 User Manual
Panasonic Kx Tes824 User Manual
Philips Scd361 User Manual
Samsung Clx 318x User Manual
Samsung Monitor P2270hd User Manual
Sanyo N 1000scr User Manual
Sears 20071450 User Manual
Sharp Ar M236 User Manual
Whirlpool X05002v0 User Manual
Zebra Technologies 11280100000 User Manual