OWNER’S
INSTRUCTIONS
AW0691L
AW0891L
AW1091L
AW1291L
AW1891L
Window-type Room Air Conditioner
(Cool)
E
F
DB98-09672A(1)
Contents
◆ PREPARING YOUR AIR CONDITIONER
◆
◆
◆
◆
◆
Safety Precautions .........................................................................................
Description of Each Component ....................................................................
Remote Control - Buttons and display ............................................................
Getting Started ...............................................................................................
Inserting the Remote Control Batteries ..........................................................
2
4
5
6
7
USING THE CONTROL PANEL ON THE UNIT
◆ OPERATING YOUR AIR CONDITIONER
◆
◆
◆
Cooling Your Room ........................................................................................
Ventilating Your Room .................................................................................... 10
Removing Excess Humidity ............................................................................ 11
9
USING THE WIRELESS REMOTE CONTROL
◆ OPERATING YOUR AIR CONDITIONER
◆
◆
◆
Cooling Your Room ........................................................................................ 13
Ventilating Your Rooms .................................................................................. 14
Removing Excess Humidity ............................................................................ 15
◆ PROGRAMMING YOUR AIR CONDITIONER
◆
◆
◆
◆
◆
◆
Setting the On Timer ...................................................................................... 16
Setting the Off Timer ...................................................................................... 17
Setting the Sleep Timer .................................................................................. 18
Selecting Energy Saving mode ...................................................................... 19
Adjusting the Air Flow Direction Horizontally .................................................. 20
Adjusting the Air Flow Direction Vertically ...................................................... 20
◆ RECOMMENDATIONS FOR USE
◆
◆
◆
◆
Temperature and Humidity Ranges ................................................................ 21
Cleaning Your Air Conditioner ........................................................................ 22
Solving Common Problems ............................................................................ 23
Technical Specifications ................................................................................. 23
E-3
Description of Each Component
◆ The design and shape are subject to
change, depending on the model.
Air outlet
Inner air flow blades
(right/left orientation)
Air outlet
Outer air flow blades
(up/down orientation)
Ventilation lever
Air inlet (Outside)
Air inlet (Inside)
Air filter (Inside)
Power plug
(The type of power plug
may differ, depending on
the local power supply.)
Timer indicator
Temperature/Timer
settings
Energy Saver indicator
Remote control
sensor
Dry adjustment indicator
On/Off button
Fan speed adjustment
button
Mode selection button
(Cool, Fan, Dry)
Temperature
adjustment buttons
E-4
Remote Control - Buttons and display
Remote control
transmission indicator
Mode selection button
(Cool, Fan, Dry)
Operating mode
(
Cool,
Dry,
Fan)
Temperature adjustment
buttons
Temperature setting
Sleep mode
Sleep timer setting button
Energy Saving mode
Fan speed adjustment
button
Fan speed
Energy Saving button
On Timer setting
Timer setting button
Off Timer setting
Timer Set/Cancel button
On/Off button
Battery discharge indicator
E-5
Getting Started
You have just purchased a Samsung window-type room air conditioner which should be installed
following your installation manual.
Your Owner’s Instructions contain much valuable information on using your air conditioner.
Please take the time to read them as they will help you take full advantage of the unit’s features.
The booklet is organized as follows.
◆ The following figures are shown on pages 4 and 5:
-
-
Description of Each Component
Remote control (buttons & display)
They will help you find the buttons and understand the symbols displayed.
◆ In the manual, you will find a series of step-by-step procedures for each function
available.
The illustrations in the step-by-step procedures use four different symbols:
◆
NOTE
◆
PRESS
PUSH
IMPORTANT
E-6
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
◆ You purchase the air conditioner
◆ The remote control does not work correctly
◆ Use two AAA, LR03 1.5V batteries.
◆
◆ Do not use old batteries or different kinds of batteries together.
◆ Batteries may be completely discharged after 12 months, even
if they have not actually been used.
1
2
Push the battery cover on the rear of the remote control with your thumb
in the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities :
◆ + on the battery with + on the remote control.
◆ - on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
E-7
Using the
Control Panel
on the Unit
This chapter indicates how to operate and program
your air conditioner with the control panel on the unit.
E-8
Cooling Your Room
You must select the Cool mode if you wish to lower the temperature
in your room. You can also set the Fan speed.
Press the
(On/Off) button.
1
Result: ◆◆The air conditioner starts up in the mode selected when the
unit was last used.
◆◆The unit beeps twice.
The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
◆
◆◆Plugged in
◆◆Stopped
It will start up normally after three minutes.
2
If the temperature is not displayed on the control panel:
◆◆Press the
button on the unit one or more times until the
temperature is displayed.
Result: ◆◆The unit beeps each time you press the
button.
◆◆The air conditioner starts up in the Cool mode.
You can change modes at any time.
◆
3
To adjust the temperature, press the
or
buttons on the unit one or
more times until the desired temperature is displayed.
The temperature can be set between 18°C and 30°C.
Result: ◆◆Each time you press the
or
buttons:
– The temperature is adjusted by 1°C and displayed on
the control panel
– The unit beeps
◆ The air conditioner starts cooling, if the room temperature is
higher than the selected temperature.
◆ If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
4
To set the fan speed:
◆◆Press the button on the unit one or more times until the
desired the Fan speed(F1, F2 or F3) is displayed.
Low
Medium
High
5
To control the direction of the air flow, refer to page 20.
E-9
Ventilating Your Room
If the air in your room is stale, you can ventilate the room using the Fan feature.
1
If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position ( ).
Result: ◆◆The air inside the room circulates and stale air is discharged
outside.
Otherwise, push the ventilation lever to the left and closed position (
).
Result: ◆◆The air simply circulates inside the room.
2
If necessary, press the
(On/Off) button.
Result: ◆◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The unit beeps twice.
3
If the fan speed(F1, F2 or F3) is not displayed on the control panel:
◆◆Press the
button on the unit one or more times until the fan speed
(F1, F2 or F3) is displayed.
Result: ◆◆The unit beeps each time you press the
button.
◆ The air conditioner starts up in the Fan mode.
◆
You can change modes at any time.
When the air conditioner is in the Fan mode, the temperature
cannot be set or displayed.
To set the fan speed:
4
5
◆◆Press the
button on the unit one or more times until the
desired fan speed(F1, F2 or F3) is displayed.
Low
Medium
High
To control the direction of the air flow, refer to page 20.
E-10
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
You can operate the Dry mode only by using the control panel.
1
If necessary, press the
(On/Off) button.
Result: ◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
2
If the dry indicator is not displayed at the top of the control panel, press
the
button on the control panel one or more times until it appears.
Result:
◆
◆
The unit beeps each time you press the
The air conditioner runs in the Dry mode.
button.
You can change modes at any time.
◆
3
To adjust the temperature, press the
or
buttons one or
more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result: ◆ Each time you press the
or
buttons:
- The temperature is adjusted by 1°C
- The unit beeps
◆ The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4
To control the direction of the air flow, refer to page 20.
E-11
Using the
Wireless
Remote
Control
This chapter indicates how to operate and program
your air conditioner with the wireless remote control.
E-12
Cooling Your Room
You must select the Cool mode if you wish to adjust the:
◆ Cooling temperature
◆ Fan speed when cooling
1
If necessary, press the
(On/Off) button.
Result:
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,
press the
appears.
button on the remote control one or more times until it
Result:
◆
◆
The unit beeps each time you press the
The air conditioner runs in the Cool mode.
button.
◆
You can change modes at any time.
3
To adjust the temperature, press the
buttons one or more times
until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result: Each time you press the buttons:
◆
- The temperature is adjusted by 1°C
- The unit beeps
◆ The air conditioner starts cooling, if the room temperature
is higher than the selected temperature.
◆ If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
4
Select the fan speed by pressing the
until the required setting is displayed:
button one or more times
Low
Medium
High
Result:
Each time you press the
button, the unit beeps.
5
To control the direction of the air flow, refer to page 20.
E-13
Ventilating Your Room
If the air in your room is stale, you can ventilate the room using the Fan feature.
1
If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position ( ).
Result: ◆◆The air inside the room circulates and stale air is discharged
outside.
Otherwise, push the ventilation lever to the left and closed position (
).
Result: ◆◆The air simply circulates inside the room.
2
If necessary, press the
(On/Off) button.
Result: ◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The unit beeps.
3
If the
is not displayed at the top of the remote control,
press the
appears.
button on the remote control one or more times until it
Result:
◆
◆
◆
The unit beeps each time you press the
The air conditioner runs in the Fan mode.
The temperature is set automatically.
button.
You can change modes at any time.
◆◆◆◆
4
Select the fan speed by pressing the
until the required setting is displayed:
button one or more times
Low
Medium
High
Result: Each time you press the
button, the unit beeps.
5
To control the direction of the air flow, refer to page 20.
E-14
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1
If necessary, press the
(On/Off) button.
Result: ◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The unit beeps.
The air conditioner is fitted with a protection mechanism
◆
to prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
2
3
4
If the
is not displayed at the top of the remote control, press the
button on the remote control one or more times until it appears.
Result:
◆
◆
The unit beeps each time you press the
The air conditioner runs in the Dry mode.
button.
You can change modes at any time.
◆◆◆◆
To adjust the temperature, press the
buttons one or more times
until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result: ◆ Each time you press the buttons:
- The temperature is adjusted by 1°C
- The unit beeps
◆ The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
To control the direction of the air flow, refer to page 20.
E-15
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically after a
given time. You can select the On timer only when the air conditioner is off. You
can select the On timer only when the air conditioner operates in the Cool mode.
Remote Control
1
Check that the air conditioner has been switched off; if necessary,
press the (On/Off) button.
2
To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 1 hour and
24 hours inclusive.
3
Press the
(Set/Cancel) button to complete the setting.
Result: ◆ The remaining time is displayed on the remote control and
the control panel.
◆ Blinking of the timer indicator on the remote control stops.
◆ The timer indicator lights up on the control panel.
◆ The unit beeps
◆ The air conditioner will switch on automatically in the cool
mode when the counter displayed on the remote control
and the control panel reaches the set time.
Control Panel
You can select the temperature and Energy saving mode after
setting the On timer mode.
◆
To Cancel the On Timer
1
Press the
(Set/Cancel) button.
If you want to turn on the air conditioner before the timer reaches
◆
the setting time, press the
(On/Off) button.
E-16
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically after a
given time. You can select the Off timer only when the air conditioner is on. You
can select the Off timer only when the air conditioner operates in the Cool mode.
Remote Control
1
Check that the air conditioner has been switched on; if necessary,
press the (On/Off) button.
2
To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 1 hour and
24 hours inclusive.
3
Press the
(Set/Cancel) button to complete the setting.
Result: ◆ The remaining time is displayed on the remote control and
the control panel.
◆ Blinking of the timer indicator on the remote control stops.
◆ The timer indicator lights up on the control panel.
◆ The unit beeps
◆ The air conditioner will switch off automatically when the
counter displayed on the remote control and the control panel
reaches the set time.
Control Panel
You can select the fan speed, temperature and Energy saving mode
after setting the Off timer mode. However, when you change the
mode, the Off timer mode is canceled.
◆
To Cancel the Off Timer
1
Press the
(Set/Cancel) button.
If you want to turn off the air conditioner before the timer reaches
◆
the setting time, press the
(On/Off) button.
E-17
Setting the Sleep Timer
The Sleep Timer can be used when you are cooling to switch the air
conditioner off automatically after a period of 8 hours.
If you wish to switch the unit off at a specific time, refer to
page 17.
◆
Remote Control
1
2
Make sure that you have selected the Cool mode.
Press the button on the remote control.
Result: ◆ Each time you press a button, the unit beeps.
◆ The indicator on the remote control is displayed.
◆ The timer indicator lights up on the control panel.
◆ The “SLEEP” passes through the control panel for about
15 seconds and the " " will be displayed.
◆ The remaining time is displayed and decreased by 1 hour
automatically to indicate the remaining time.
◆ The air conditioner will be controlled as indicated in the
illustrations below.
Control Panel
Cooling When the temperature has
been increased by 1°C
(after 1 hour), it is maintained
for 7 hours.
To Cancel the Sleep Timer
To cancel the timer, press:
◆ The
button on the remote control.
Result: ◆ The unit beeps.
◆ The
indicator on the remote control is no longer displayed.
◆ The “SLEEP” indicator on the control panel is no longer
displayed.
◆ The air conditioner operates in the mode selected last.
If you select the Energy Saving mode in the Sleep Timer mode,
the Sleep Timer will be cancelled and the air conditioner will start
up in the Energy Saving mode.
◆
E-18
Selecting Energy Saving Mode
If you wish to save energy when using your air conditioner,
select the energy saving mode.
Remote Control
To select the energy saving mode, press the
button on the remote
1
control one or more times until the Energy Saving indicator lights up.
Result:
◆
◆
◆
The E-saver indicator lights up on the control panel.
The fan and compressor cycle on and off together.
The fan will continue to run for a short time after the
compressor cycles off.
◆
If you would like the air conditioner to run in Fan mode, do not press
the
button. You cannot use the Fan mode in the Energy Saving
mode.
Control Panel
2
To stop the energy saving mode, press the
control again.
button on the remote
Result: The fan runs at all times, while the compressor cycles on and off.
◆
If you select the Sleep Timer in the Energy Saving mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
E-19
Adjusting the Air Flow Direction Horizontally
Depending on the position of the unit in your room, you can adjust
the orientation of the inner air flow blades on the unit.
Adjust the air flow blades to the desired position by pushing them side to side.
Adjusting the Air Flow Direction Vertically
Again depending on the position of the unit in your room, you can
adjust the orientation of the outer air flow blades on the right-hand
side of the unit.
RECOMMENDATION
When...
Adjust the blades to face...
Cooling
Upwards.
1
Adjust the air flow blades to the desired position, by pushing them
upwards or downwards.
If you orient the air flow blades downwards and the unit
operates in Cool mode for long periods of time, dew may:
◆◆◆Form on the surface of the blades
◆
◆◆◆Drip from the blades
E-20
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges
within which the air conditioner can be used.
Mode
Indoor Temperature
Outdoor Temperature
Indoor Humidity
Cooling
21°C to 32°C approx.
21°C to 43°C approx.
80% or less
If the air conditioner is used at...
Then...
Higher temperature
The automatic protection feature may be triggered and the air
conditioner stopped.
Lower temperature
A water leakage or some other malfunction may happen if the
heat exchanger freezes.
Higher humidity levels
Water may condense on and drip from the surface of the unit
if it is used for long periods.
E-21
Cleaning Your Air Conditioner
Be sure to clean the air filter periodically to maintain the air conditioner
in the best condition for a long period of time.
When cleaning the air conditioner, turn it off and pull out the
power plug.
◆
1
Open the front grille by pulling the tabs on both sides of the grille.
Then lift it up slightly to open the front grille completely.
2
3
Grab the tabs on the filter and pull it up and out.
Remove all dust on the air filter with a vacuum cleaner or brush.
4
5
When you have finished, insert the air filter back into its original position.
Wipe the surface of the unit with a neutral detergent
and then wipe it again with dry cloth.
(Be sure not to use benzene, solvent or other chemical products.)
If you...
Then...
◆
◆◆Set the fan going for a few hours to
dry the inside of the air conditioner
thoroughly.
Will not be using the
air conditioner for a
long period of time
◆◆Switch the air conditioner off and
unplug it from the wall socket.
◆◆Clean the filter and outer surfaces.
Set the fan going for a few hours to
dry the inside of the air conditioner
thoroughly.
Have not used the air
conditioner for a long
period of time
E-22
Solving Common Problems
Before contacting an authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Problem
Explanation / Solution
◆ Check that the circuit breaker used for the air conditioner has not been
triggered.
◆◆◆Check that the power cable is plugged into a wall socket and the socket is
switched on, if necessary.
The air conditioner does
not operate at all
◆◆◆Check that the temperature indicator on the unit is lit; if necessary,
press the
(On/Off) button on the remote control or unit.
◆ Check that there are no obstacles between you and the unit.
◆◆◆Replace the remote control batteries if necessary.
◆◆◆Check that you are close enough to the unit (seven metres/yards or less).
The air conditioner does not
operate with the remote
control
◆ Check that you are pointing the remote control at the remote control sensor
on the unit.
No beep is heard when you
press the
(On/Off) button
on the remote control
◆◆◆Replace the remote control batteries if necessary.
◆ Check that the correct operating mode has been selected(Cool).
◆◆◆The room temperature may be too low.
The air conditioner does not
cool
◆ Dust may be blocking the air filter; refer to page 22 for cleaning instructions.
◆ Check that there is no obstacle blocking the air flow into or out of the unit.
◆ Check that the timer has been programmed correctly;
The timer is not correctly
triggered
refer to page 16~18.
Odors are permeating the
room during air conditioning
◆◆ Ventilate the room.
Technical Specifications
Design and specifications are subject to change without notice.
Model
Power Supply
AW0691L
AW0891L
AW1091L
AW1291L
115V~, 60Hz
230-208V~, 60Hz
AW1891L
E-23
YOUR SAMSUNG ROOM AIR CONDITIONER
WARRANTY
Limited Warranty to Original Purchaser
Samsung will repair or replace, at our option, this product if found defective within the warranty
period beginning from the original date of purchase. This Samsung Product is warranted by
SAMSUNG ELECTRONICS CANADA Inc. against manufacturing defects in materials or
workmanship for the period specified.
Labor
Parts
1 Year (In home)
1 Year
Limited 5-Years Compressor Warranty
Within one year of purchase Samsung Electronics Canada Inc. will provide a replacement
compressor if it is found to be defective in material or workmanship. During the existing four
years (second through fifth year) Samsung Electronics Canada Inc. will provide a replacement
only, without charge, if it is found to be defective in material or workmanship. Labor to install
the compressor during these existing four years is not included in the warranty. All warranty
repairs must be performed by a Samsung Authorized Service Centre.
Obligation of the Original Owner
The original dated purchase receipt must be retained as proof of purchase and presented to
the Authorized Service Centre before warranty services are rendered.
Exclusions of the Warranty
This warranty does not cover damage due to accident, fire, flood and/or other Acts of God:
misuse, incorrect line voltage, improper installation, improper or unauthorized repairs,
commercial use, or damages which occur in shipping. Exterior and interior finish and plastic
parts, are not covered under this warranty, Customer adjustments which are explained in the
instruction manual are not covered under the terms of this warranty. This warranty will
automatically be voided for any unit found with a missing or altered serial number.
This warranty is valid only on products purchased and used in Canada.
SAMSUNG ELECTRONICS CANADA INC.
7037 Financial Drive, Mississauga, Ontario L5N 6R3
ELECTRONICS
Printed in Korea
|