OWNER’S INSTRUCTIONS &
INSTALLATION MANUAL
MANUAL DE INSTRUCCIONES &
MANUAL DE INSTALACIÓN
MANUEL D’UTILISATION &
MANUEL D’INSTALLATION
Indoor Unit
AQ30C1(2)BC
AQ30C1(2)BCD
Outdoor Unit
UQ30C1(2)BC
UQ30C1(2)BCD
Split-type Room Air Conditioner (Cool and Heat)
Aire acondicionado doméstico sistema Split (Refrigeración y Calefacción)
Climatiseur de type Séparé (Refroidissement et Chauffage)
E
S
F
DB98-05110A(3)
Contents
◆
PREPARING YOUR AIR CONDITIONER
◆◆◆Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
◆◆◆View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
◆◆◆Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . 6
◆◆◆Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
◆◆◆Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . 8
◆◆◆Installing the Remote Control Holder . . . . . . . . . . . . . . . . . . . . 8
◆
OPERATING YOUR AIR CONDITIONER
◆◆◆5 Way Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
◆◆◆Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . 10
◆◆◆Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
◆◆◆Heating Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
◆◆◆Changing the Room Temperature Quickly . . . . . . . . . . . . . . . 13
◆◆◆Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . 14
◆◆◆Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
◆◆◆Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . 16
◆◆◆Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . 17
◆
◆
PROGRAMMING YOUR AIR CONDITIONER
◆◆◆Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
◆◆◆Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
◆◆◆Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
RECOMMENDATIONS FOR USE
◆◆◆Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . 21
◆◆◆Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . 22
◆◆◆Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . 23
◆◆◆Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 24
◆◆◆Installing a Filter (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
◆
TECHNICAL SPECIFICATIONS
E-3
View of the Unit
Indoor Unit
Air filter
(under the grille)
Air Inlet
Air flow blades (outlet)
On/Off & 5 Way
selection button/
Remote Control Sensor
Timer indicator
STANDARD indicator
NATURE indicator
SILENCE indicator
SAVING indicator
POWER indicator
◆ For details on the 5 Way, refer to page 9.
No t e
E-4
Outdoor Unit
UQ30C1(2)BC
Air Inlet (Rear)
Air Outlet
Connection Valve
Outdoor Unit
UQ30C1(2)BCD
Air Inlet (Rear)
Air Outlet
Connection Valve
E-5
Remote Control - Buttons and Display
Remote control
transmission indicator
Mode selection button
(AUTO, COOL, DRY, FAN, HEAT)
Operating mode
(
AUTO,
COOL,
DRY,
FAN,
HEAT)
Temperature adjustment
buttons
Temperature setting
Turbo mode
Sleep mode
Turbo/Sleep mode
selection button
Fan speed
Fan speed adjustment
button
Air flow direction
Swing button
On Timer setting
On Timer button
Off Timer setting
Off Timer button
Battery discharge indicator
On/Off &
Timer Set/Cancel button
5 Way selection button
E-6
Getting Started
You have just purchased a split type air conditioner and it has been
installed by your installation specialist.
Your Ow ner’s Instructions contains valuable inform ation on using your
air conditioner. Please take the tim e to read it as it w ill help you take full
advantage of the unit’s features.
The booklet is organized as follow s.
◆ The follow ing figures are show n on pages from 4 to 6 :
-
-
Indoor and outdoor units
Rem ote control(buttons and display)
They w ill help you find the buttons and understand the sym bols displayed.
◆ In the m ain part of the installation book, you w ill find a series of
step-by-step procedures for each function available.
The illustrations in the step-by-step procedures use three different sym bols:
PRESS
PUSH
HOLD DOWN
E-7
Inserting the Remote Control Batteries
You m ust insert or replace the rem ote control batteries w hen :
◆ You purchase the air conditioner
◆ The rem ote control does not w ork correctly
No t e
◆ Use two AAA, LR03 1.5V batteries.
◆ Do not use old batteries or different kinds of batteries together.
◆ Batteries may be completely discharged after 12 months, even
◆ if they have not actually been used.
1
2
Push the battery cover on the rear of the remote control with your thumb
in the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities :
◆ + on the battery with + on the remote control.
◆ - on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
Installing the Remote Control Holder
1
2
Place the remote control holder on the wall.
Fix the remote control holder by tightening the screws.
3
Put the remote control into the holder as shown in the figure.
◆ If you want to install the holder easily, you had better install the holder
on the wooden frame.
E-8
5 Way Function
You can select the 5 Way function with operating mode of the air conditioner for
more comfortable circumstances. You can use the 5 Way function with the indoor
unit as well as the remote control. Thus, you can use this function
even though you have lost your remote control.
Using with the indoor unit
1
Press the
mode.
(ON/OFF) button one time and then select the desired
To obtain a(n)...
Then select...
Normal operating
(STANDARD) mode
Reducing the uncomfortable
temperature gradually
(NATURE) mode
(POWER) mode
(SAVING) mode
(SILENCE) mode
High fan speed
Compressor run time reduced
Fan speed reduces as the temperature
decreases
2
To stop the operating, press the
turn off.
(ON/OFF) button until all indicators
No t e
Even if the air conditioner has been turned on via the ON/OFF
button on the unit, operations can still be controlled using the
remote control as usual.
Selecting with the Remote Control
To select the 5 Way function with the remote control, press the 5 Way
button one or more times until the desired mode is selected.
◆ Each time you press the 5 Way button:
Each 5 Way indicator on the indoor unit lights up in order.
E-9
Selecting the Automatic Operating Mode
You can start the air conditioner in Autom atic m ode from your rem ote
control. In the Autom atic m ode, the standard tem perature and the
optim um fan speed is selected autom atically. You can adjust the
standard tem perature but not the fan speed.
1
If necessary, press the
(On/Off) button.
Result:
◆ The 5 Way indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,
press the MODE button on the remote control one or more times until it
appears.
Result:
◆ The indoor unit beeps each time you press the MODE button.
◆ The air conditioner runs in AUTO mode.
No t e
You can change modes at any time.
3
To adjust the standard temperature (The air conditioner automatically
set the standard temperature by the current room temperature.),
press the TEMPERATURE buttons one or more times.
SET TEMP. SET TEMP.
-4°F/-2°C -2°F/-1°C Standard temperature +2°F/+1°C +4°F/+2°C
< When you feel hot > < When you feel chilly >
-
SET TEMP. SET TEMP.
E-10
Cooling Your Room
You m ust select the Cool m ode if you w ish to adjust the:
◆ Cooling tem perature
◆ Fan speed w hen cooling
1
If necessary, press the
(On/Off) button.
Result: The 5 Way indicator on the indoor unit lights up.
◆
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,
press the MODE button on the remote control one or more times until it
appears.
Result:
◆
◆
The indoor unit beeps each time you press the MODE button.
The air conditioner runs in COOL mode.
No t e
You can change modes at any time.
3
To adjust the temperature, press the TEMPERATURE buttons one or
more times until the required temperature is displayed.
Possible temperatures are between 65°F(18°C) and 86°F(30°C)
inclusive.
Result:
◆
Each time you press the TEMPERATURE buttons:
- The temperature is adjusted by 1°F(1°C)
- The indoor unit beeps
◆ The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature;
the fan will, however, operate.
4
Select the fan speed by pressing the FAN button one or more times
until the required setting is displayed:
Automatic (rotated :
)
Low
Medium
High
Result:
Each time you press the FAN button, the indoor unit beeps.
5
To control the direction of the air flow, refer to pages 16 and 17.
E-11
Heating Your Room
You m ust select the Heat m ode if you w ish to adjust the:
◆ Heating tem perature
◆ Fan speed w hen heating
1
If necessary, press the
(On/Off) button.
Result: The 5 Way indicator on the indoor unit lights up.
◆
◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
IMPORTANT
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control, press the
MODE button on the remote control one or more times until it appears.
Result:
◆
◆
The indoor unit beeps each time you press the MODE button.
The air conditioner runs in HEAT mode.
No t e You can change modes at any time.
3
To adjust the temperature, press the TEMPERATURE buttons one or
more times until the required temperature is displayed.
Possible temperatures are between 61°F(16°C) and 86°F(30°C)
inclusive.
Result: ◆ Each time you press the TEMPERATURE buttons:
- The temperature is adjusted by 1°F(1°C)
- The indoor unit beeps
◆ The air conditioner starts heating, provided that the room
temperature is lower than the desired temperature
(selected temperature +6°F/+3°C); the fan will, however,
operate.
4
Select the fan speed by pressing the FAN button one or more times
until the required setting is displayed:
Automatic (rotated :
Low
)
Medium
High
Result:
◆
◆
Each time you press the FAN button, the indoor unit beeps.
For the first three to five minutes, the fan operates very
slowly until the air has been sufficiently warmed. Once the
correct temperature has been reached, the fan is automatically
set to the required speed.
5
To control the direction of the air flow, refer to pages 16 and 17.
E-12
Changing the Room Temperature Quickly
The Turbo cooling/ heating function is used to cool or heat your room as
quickly as possible.
Exa m p le :
You have just com e hom e and find that the room is very
hot. You w ish to cool it dow n as quickly as possible.
The Turbo function operates for 30 minutes with the maximum settings before
returning automatically to the mode and temperature previously selected.
1
2
If necessary, press the
(On/Off) button.
Result:
◆ The 5 Way indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected when the unit
was last used.
◆ The indoor unit beeps.
Press the
Result:
button.
◆ The temperature and fan settings are adjusted automatically.
◆ The air conditioner cools or heats the room as quickly as possible.
◆ After 30 minutes, the air conditioner is reset automatically to the
previous mode, temperature and fan settings.
But, if you press the
button in DRY or FAN mode,
it will change to AUTO mode automatically.
3
4
If you wish to stop the Turbo function before the end of the 30-minute period,
press the
button one or more times until
or
disappears.
Result:
The air conditioner is reset automatically to the previous mode,
temperature and fan settings.
To control the direction of the air flow, refer to pages 16 and 17.
E-13
Removing Excess Humidity
If the atm osphere in your room is very hum id or dam p, you can
rem ove excess hum idity w ithout low ering the room tem perature too
m uch.
1
If necessary, press the
(On/Off) button.
Result: The 5 Way indicator on the indoor unit lights up.
◆
◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control, press the
MODE button on the remote control one or more times until it appears.
Result:
◆
◆
The indoor unit beeps each time you press the MODE button.
The air conditioner runs in DRY mode.
No t e
You can change modes at any time.
3
To adjust the temperature, press the TEMPERATURE buttons one or
more times until the required temperature is displayed.
Possible temperatures are between 65°F(18°C) and 86°F(30°C)
inclusive.
Result: ◆ Each time you press the TEMPERATURE buttons:
- The temperature is adjusted by 1°F(1°C)
- The indoor unit beeps
◆ The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4
To control the direction of the air flow, refer to pages 16 and 17.
E-14
Airing Your Room
If the atm osphere in your room is stale, you can air the room using
the Fan feature.
1
If necessary, press the
(On/Off) button.
Result: The 5 Way indicator on the indoor unit lights up.
◆
◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
2
If the
is not displayed at the top of the remote control,
press the MODE button on the remote control one or more times until it
appears.
Result:
◆
◆
◆
The indoor unit beeps each time you press the MODE button.
The air conditioner runs in FAN mode.
The temperature is set automatically.
No t e
You can change modes at any time.
3
Select the fan speed by pressing the FAN button one or more times
until the required setting is displayed:
Low
Medium
High
Result: Each time you press the FAN button, the indoor unit beeps.
4
To control the direction of the air flow, refer to pages 16 and 17.
E-15
Adjusting the Air Flow Direction Vertically
Depending on the position of the indoor unit on the w all of your room ,
you can adjust the position of the outer air flow blade on the bottom of
the unit, thus increasing the efficiency of the air conditioner.
1
Press the SWING button one or more times as required.
Result: The outer blade is adjusted vertically.
RECOMMENDATION
When...
Adjust the blade to face...
Cooling
Heating
Upwards.
Downwards.
2
If you want the blade to move up and down automatically when the air
conditioner is operating, press the SWING button.
Result: The blade move up and down, around the base position set.
3
To stop the blade moving up and down, press the SWING button again.
No t e
If you switch the air conditioner... Then the blade is...
Off
Closed completely.
On again
Set to the initial position powered.
E-16
Adjusting the Air Flow Direction Horizontally
There are tw o sets of inner air flow blades. J ust as the outer air flow
blade can be adjusted vertically, the inner blades can be adjusted
horizontally.
1
Adjust each set of inner blades to the required position, by pushing or
pulling them sideways.
E-17
Setting the On Timer
The On Timer enables you to sw itch on the air conditioner automatically
after a given period of time. You can set the period of time from
30 minutes to 24 hours.
1
To set the operating time, press the ON TIMER button one or more times
until the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
2
Press the
(Set/Cancel) button to complete the setting.
Result: ◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The selected mode and the temperature on the display
disappear after 10 seconds.
◆ The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On timer setting.
3
To select an operating mode in advance, press the
button until the
desired mode is displayed at the top of the remote control.
Result: ◆ The air conditioner will run in the selected mode when it is
turned on.
To Cancel the On Timer
1
To cancel the On Timer, press the ON TIMER button one or more times
until the timer setting disappears.
2
Press the
(Set/Cancel) button.
No t e
If you want to turn on the air conditioner before the timer reaches
the setting time, press the (ON/OFF) button.
E-18
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically
after a given period of time. You can set the period of time from
30 minutes to 24 hours.
1
To set the operating time, press the OFF TIMER button one or more times
until the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
2
Press the
(Set/Cancel) button to complete the setting.
Result: ◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The air conditioner will switch off automatically when the
counter displayed on the remote control reaches the set time
and disappears the Off timer setting.
Exam ple If you would like to turn the air conditioner on after 2 hours
and to operate it for 2 hours:
1. Press the ON TIMER button until ‘2.0 Hr’ is displayed.
2. Press the (Set/Cancel) button.
3. Press the OFF TIMER button until ‘4.0 Hr’ is displayed.
4. Press the (Set/Cancel) button.
No t e
You can see or change the setting mode and/or the temperature
by pressing the MODE button or the TEMPERATURE buttons
after setting the Off timer.
To Cancel the Off Timer
1
To cancel the Off Timer, press the OFF TIMER button one or more times
until the timer setting disappears.
2
Press the
(Set/Cancel) button.
No t e
If you want to turn off the air conditioner before the timer reaches
the setting time, press the
(ON/OFF) button.
E-19
Setting the Sleep Timer
The Sleep Tim er can be used w hen you are cooling or heating your
room to sw itch the air conditioner off autom atically after a period of
six hours.
No t e
If you w ish to sw itch the unit off at a specific tim e, refer to
page 19.
1
2
Make sure that you have selected either COOL or HEAT mode.
Press the
button one or more times until
appears on the
remote control.
Result: ◆ The indoor unit beeps.
◆ The air conditioner will be controlled as indicated in the
illustrations below.
Cooling The desired temperature is
increased by 2°F/1°C every
hour.
When it has been increased
by 4°F/2°C (after two hours),
the temperature is maintained
for four hours.
Heating The desired temperature is
decreased by 2°F/1°C every
hour.
When it has been decreased
by 4°F/2°C (after two hours),
the temperature is maintained
for four hours.
To Cancel the Sleep Timer
If you no longer w ish to use the Sleep Tim er that you have set, you
can cancel it at any tim e.
Press the
Result:
button.
◆
◆
◆
The indoor unit beeps.
The
The air conditioner operates normally.
is no longer displayed.
E-20
Operating Recommendations
Here are a few recom m endations that you should follow w hen using
your air conditioner.
Topic
Recommendation
Heating performances
The heat pump inside the air conditioner
absorbs heat from outside air and brings it
indoors. If the temperature of the outside air
drops, the air conditioner will heat less. If you
find that the room is not warm enough, use an
additional heating appliance.
Warm air circulation
The air conditioner circulates warm air to heat
your room; as a result, some time will be
required after starting the air conditioner to
warm the entire room. If necessary, set the air
conditioner on before you wish to use the
room.
Frost
When outside temperatures are low and
humidity is high, frost may form in the outdoor
unit when heating is selected.
If this happens:
◆ The heating operation is stopped.
◆ The Deice mode is triggered automatically
for about seven minutes.
No intervention is required from you; after
about seven minutes, the air conditioner starts
operating again normally.
High indoor and outdoor If both the indoor and outdoor temperatures
temperatures
are high and you select the Heat mode, the
outdoor unit’s fan and compressor may stop at
times. This is normal; simply wait until the air
conditioner switches on again.
Power failure
If a power failure occurs when the air
conditioner is operating, the unit is switched off.
When the power returns,
you must press the (ON/OFF)
button to restart it.
◆◆C1◆◆
the air conditioner starts up
again automatically
◆◆C2◆◆
E-21
Temperature and Humidity Ranges
The follow ing table indicates the tem perature and hum idity ranges
w ithin w hich the air conditioner can be used.
If the air conditioner is used at... Then...
High temperatures
The automatic protection feature may
be triggered and the air conditioner
stopped.
Low temperatures
A water leak or some other malfunction
may occur if the heat exchanger
freezes.
High humidity levels
Water may condense on and drip
from the surface of the indoor unit if it
is used for long periods.
Mode
Outdoor Temperature
Indoor Temperature Indoor Humidity
Heating 32°F to 75°F approx.
81°F or less
0°C to 24°C approx.
27°C or less
-
Cooling
Drying
70°F to 109°F approx.
65°F to 90°F approx.
21°C to 43°C approx.
18°C to 32°C approx. 80% or less
65°F to 109°F approx.
65°F to 90°F approx.
18°C to 43°C approx.
18°C to 32°C approx.
-
◆◆ If the heating operation is used at below 32°F/0°C(outdoor temperature)
then, it does not heat as its full capacity.
If the cooling operation is used at over 92°F/33°C(indoor temperature)
then, it does not cool as its full capacity.
E-22
Cleaning Your Air Conditioner
To get the best possible use out of your air conditioner, you m ust
clean it regularly to rem ove the dust that accum ulates on the air filter.
Before cleaning your air conditioner, ensure that you
have sw itched off the breaker used for the unit.
IMPORTANT
1
Open the front grille by pulling on the tabs on the lower right and left
sides of the indoor unit.
2
3
4
5
Disassemble the front grille by pulling it forwards.
Lift out the bottom edge of the air filters and pull down to release them.
Remove all dust on the air filters with a vacuum cleaner or brush.
When you have finished, insert the top part of the filters into their slot
and push down on the bottom edge until they click into place.
Hook
6
Clean the front panel with a damp cloth and mild detergent (do NOT use
benzene, solvents or other chemicals).
Body groove
Front grille
Not e ◆◆If you have not used the air conditioner for a long period of time, set
the fan going for three to four hours to dry the inside of the air
conditioner thoroughly.
E-23
Solving Common Problems
Before contacting the after-sales service, perform the follow ing sim ple checks.
They m ay save you the tim e and expense of an unnecessary call.
Problem
Explanation/Solution
The air conditioner does not
operate at all
◆ Check that the breaker used for the air conditioner is switched on.
◆ Check that the 5 Way indicator on the indoor unit is on;
if necessary press the
(On/Off) button on the remote control.
◆ Check whether the TIMER indicator on the indoor unit is switched on.
If so:
- Wait until the switch-on time is reached and the air conditioner starts
up automatically
- Cancel the timer (see pages 18 and 19 for further details)
The air conditioner does not
operate with the remote control
◆ Check that there are no obstacles between you and the indoor unit.
◆ Check the remote control batteries.
◆ Check that you are close enough to the indoor unit
(seven metres/yards/23ft. or less).
No beep is heard when you press
◆ Check that you are pointing the remote control at the remote control
sensor in the right of the indoor unit.
the
(On/Off) on the remote
control
◆ Replace the remote control batteries if necessary.
The air conditioner does not cool
or heat
◆ Check that the correct operating mode has been selected
(AUTO, COOL, HEAT).
◆ The room temperature may be too low or too high.
◆ Dust may be blocking the air filter guard; refer to page 23 for cleaning
instructions.
◆ Check that there is no obstacle in front of the outdoor unit.
When heating, the required room
temperature is never reached and
the air conditioner frequently stops
◆ Check that the required temperature has been set correctly.
◆ Increase the fan speed.
◆ If the air flow is directed downwards, use the remote control to direct it
upwards.
The fan speed does not change
when you press the FAN button
◆ Check that the operating mode is set to COOL, HEAT or FAN ;
in the AUTO mode, the fan speed changes automatically and in the
DRY mode, it is set to AUTO.
The air flow direction does not
change when you press the
SWING button
◆ Check that the air conditioner has been switched on; if necessary,
press the
(On/Off) button on the remote control.
The timer is not correctly triggered
◆ Check that the timer has been programmed correctly; see pages 18
and 19.
Odours are permeated in the room ◆ Air the room.
during air conditioning
◆◆◆Since this air conditioner is a heat pump model, there can be hollow
The air conditioner makes a hollow
sound when it is turned on or off
sound caused by flow of refrigerant when you turn the air conditioner
on/off. The sound is not a defect of the air conditioner and it does not
affect the cooling/heating capacity.
E-24
Installing a Filter (Option)
The air conditioner can be fitted w ith a deodorizing and Bio-Pure
filter to rem ove m inute dust particles or odours. The service life of
the filter is approxim ately three m onths depending on the tim e
during w hich the air conditioner is used.
1
Remove the vinyl packing from the filter.
No t e
Do not remove the packing from a deodorizing filter until you
wish to use the filter, as it will lose its properties.
Deodorizing
filter
2
3
Insert the filter in the filter holder and press the three insert tabs until
you hear a click.
Bio-Pure Filter
Open the front grille by pulling on the tabs on the lower right and left
sides of the indoor unit.
4
Take out the existing filter and replace it with the new one.
E-25
Technical Specifications
◆
These results are measured at the standard piping length. The standard length is 7.5m(24ft. 7in).
MODEL
Capacity Cooling
Capacity Heating
HSPF
AQ30◆◆BC/AQ30◆◆BCD
Btu/h
Btu/h
30000
Performance
Ratings
30000
6.8
SEER
10.0
Moisture Removal
Air FLOW(Cooling, HIGH)
Air FLOW(Heating, HIGH)
Sound Rating-Outdoor
Power source
Pts/h
CFM
CFM
dB
7.2
671
706
58
208-230V~, 60Hz
14
Electrical
Data
A
Min.Ampacity
W
W
Cooling Watts
3100
Heating Watts
3100
Connections
Flare
Refrigeration
Lines
Liquid Line O. D.
Suction Line O.D.
Factory Pre-charge
Max. Line length
Max. Height Difference
mm(in)
mm(in)
m(ft)
6.35 (1/4)
15.88 (5/8)
( 24 34
( 65 12
( 26 14
7.5
20.0
8.0
)
)
)
m(ft)
m(ft)
AQ30◆◆BC/AQ30◆◆BCD
Dimensions
& Weight
INDOOR UNIT
1279 x 345 x 229
mm(in)
Ibs
( 5083
13 8 9 )
W X H X D
5
x
x
Net Weight
44.1
UQ30◆◆BC/UQ30◆◆BCD
OUTDOOR UNIT
880 x 890 x 310
mm(in)
Ibs
(34 85
12 14
W X H X D
Net Weight
x
x
35
)
183
◆◆Standard rating conditions Cooling
Indoor
Outdoor
DB WB
DB
WB
67
80
95
75
°F
26.7
19.4
35.0
23.9
°C
Heating
Indoor
Outdoor
DB
70
WB
60
DB
47
WB
43
°F
21.1
15.6
8.3
6.1
°C
E-26
Memo
E-27
|