12 Volt 65 AH
DCG12-65
Features
• Thixotropic gel electrolyte for enhanced performance
• Valve regulated, spill proof construction allows safe
operation in any position
• Superior capabilities
• Power/volume ratio yielding unrivaled energy density
• Rugged ABS plastic (UL94-HB) case and cover
• Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and
C.A.B. certified
• U.L. recognized - MH 20845
• CE compliant
Terminals
(mm)
Performance Specifications
Nominal Voltage............................................................................ 12 volts (6 cells)
Nominal Capacity
16mm
M6
6mm
• T6: Threaded insert w.
6 mm stud fastener
20-hr. (3.25A to 10.5 volts) ............................................................ 65.0 AH
10-hr. (6.00A to 10.5 volts) ............................................................ 60.0 AH
5-hr.
3-hr.
1-hr.
(11.60A to 10.5 volts) .......................................................... 58.0 AH
(17.20A to 10.5 volts) ........................................................... 51.6 AH
(40.3A to 9.0 volts) .............................................................. 40.3 AH
Physical Dimensions: in(mm)
Approximate Weight ................................................................ 48.0 lbs. (21.8 kg)
Energy Density (20-hr. rate) ..................................... 1.41 W-h/in3 (86.33 W-h/l)
Specific Energy (20-hr. rate) ................................ 16.25 W-h/lb (35.83 W-h/kg)
Internal Resistance (approx.) ......................................................... 4.5 milliohms
Shelf Life (% of nominal capacity at 68°F (20°C))
W
1 Month ..................................................................................................... 0.97
3 Months.................................................................................................... 0.91
6 Months ................................................................................................... 0.83
Operating Temperature Range
L
RECHARGEABLE
GEL BATTERY
HT
H
®
™
POWER-GEL SERIES
®
Pb
Charge.. ........................................................... -4°F (-20°C) to 122°F (50°C)
Discharge....................................................... -40°F (-40°C) to 140°F (60°C)
Case .....................................................................................ABS Plastic (UL94 HB)
Recommended Power-Sonic Chargers .............................................................n/a
MH20845
Power-Sonic Corporation
NONSPILLABLE
DCG 12-65
12 Volt 65 Amp Hours
L: 10.25 (260) W: 6.60 (168) H: 8.15 (207) HT: 8.98 (228)
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm)
for height dimensions. All data subject to change without notice.
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
All data subject to change without notice.
|