Philips Scb2105nb User Manual

SCB2105NB Universal Charger  
Important Safety Instructions:  
EN  
A)  
SCB2105NB  
Save these instructions - this manual contains important safety and operating  
instructions for this charger. Before using your charger read all instructions and  
cautionary markings on the charger, the batteries to be charged and the  
products that use the batteries.  
EN  
FR  
ES  
User Manual  
Manuel d’utilisation  
Guía de usuario  
Bedienungsanleitung  
Gebruikershandleiding  
Manuale d'uso  
Warning:  
DE  
NL  
IT  
• Use to charge Ni-MH and Ni-Cd batteries only. Do not charge Alkaline, Zinc  
Carbon, Lithium or any other type of battery not specified on the charger.  
Other types of batteries might burst or leak causing personal injury.  
• For proper battery insertion, please observe pole indications (+/-). See fig.A.  
• Do not dispose of in fire, short circuit or open.  
PT  
GR  
TR  
DK  
SV  
FI  
Manual do utilizador  
OdËÁfi˜ ¯Ú‹Û˘  
Kullanım kılavuzu  
Brugervejledning  
Använderhandbok  
Käyttöohje  
Instrukcja obsługi  
Uživatelská příručka  
Návod na použitie  
Felhasználói kézikönyv  
Руководство по  
эксплуатации  
• Charge new batteries before using.  
• Never alter the AC cord or plug.  
• Do not operate the charger if it has been subjected to shock or if it is  
damaged.  
• Do not disassemble the charger.  
B)  
To avoid risk of electric shock, unplug the charger from the electrical outlet  
before cleaning or when not in use.  
This battery charger is for indoor use only. Do not expose the charger to rain  
or excessive moisture. Keep the charger away from dust and dirt, which can  
cause premature wear of parts or harm its normal operation.  
• Never use the charger as a power source for any electrical equipment.  
• Do not incinerate, disassemble or short circuit batteries since they may burst  
or release toxic materials.  
This charger is not intended for use by young children or infirm persons  
without supervision.  
To reduce the risk of damage to the AC plug and cord, disconnect the charger  
by pulling the plug and not the cord.  
PL  
CS  
SK  
HU  
RU  
Set the switch to  
Ni-MH or Ni-CD!  
• Do not operate the charger if cord or plug is damaged.  
• Do not charge AAA and AA batteries in the same slot.  
• Charge Ni-Cd and Ni-MH batteries separately.  
C)  
• Do not charge damaged or leaking batteries.  
Care:  
Wipe the charger with a damp cloth occasionally without harsh chemicals,  
cleaning solvents or strong detergents.  
• Charger and batteries must be disposed of separately. Inform yourself about  
the separate collection system for electrical and electronic products.  
Operating Instructions  
D)  
Battery charging times:  
General charging guidelines  
• At the same time you can charge 2 or 4 AA,AAA, C or D batteries or 2 9V  
batteries.  
Battery  
size  
Battery  
Approx.  
You can charge NiCd or NiMH batteries. Set the Ni-Cd / Ni-MH switch in the  
correct position (Ni-Cd or Ni-MH). See fig. B.  
capacity (mAh) charging time  
AA Ni-MH  
AA Ni-MH  
AA Ni-MH  
AA Ni-MH  
AAA Ni-MH  
9VNi-MH  
C Ni-MH  
D Ni-MH  
AA Ni-Cd  
AA Ni-Cd  
AA Ni-Cd  
2600 mAh  
2300 mAh  
1800 mAh  
1300 mAh  
700 mAh  
170 mAh  
2200 mAh  
4800 mAh  
600 mAh  
800 mAh  
1000 mAh  
12 ½ hrs  
10 ¾ hrs  
8 ½ hrs  
6 ¼ hrs  
8 ½ hrs  
13 hrs  
9 ¾ hrs  
21 ¼ hrs  
7 ¾ hrs  
10 ½ hrs  
13 ½ hrs  
• Make sure batteries in each pair of slots (1/2 and/or 3/4) are identical (same  
capacity, size and chemistry type).  
To keep your batteries in the best condition, you have to limit the charging  
time according to the charging table. See fig. D. You can limit the charging time  
by disconnecting the plug from the outlet and remove the batteries.  
• For long battery life, only charge empty batteries.  
• When charging, ambient temperature should be between 0°C and 40°C  
(32°F and 104°F).  
Note: It is normal for the unit and the batteries to become warm while charging.  
Charging batteries  
1 Lift up the charger cover and insert batteries into the battery charger.  
See fig.A.  
2 Set the Ni-Cd / Ni-MH switch in the correct position (Ni-Cd or Ni-MH).  
See fig. B.  
3 Connect the plug into a household electric outlet. See fig. B.  
>The CHARGE LED(s) light(s) up red indicating that charging is in progress.  
> If the batteries are not installed correctly,  
the CHARGE LED(s) will not light and the charger will not start charging.  
>When the batteries (AA,AAA, C or D) are fully charged, the CHARGE LED(s)  
go(es) out and the charger switches off.  
>When charging 9V batteries the CHARGE LED(s) will remain lit until the charging  
is stopped manually. See fig. C.  
Make sure not to exceed the charging time for 9V batteries. See fig. D.  
3 When you are going to use the batteries, disconnect the plug from the outlet  
and remove the batteries. See fig. C.Always unplug between charges!  
Additional information (including warranty conditions)  
available at our website:  
Battery charging times: See fig. D.  
0682  
Specifications are subject to change without notice.  
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.  
2008 © Koninklijke Philips Electronics N.V. All rights reserved.  
Specifications subject to change without notice.  
All dimensions shown are approximate.  

Pioneer Automobile Parts Gbih Series User Manual
Samsung All In One Printer Scx 4728fd User Manual
Sharp Af R120dx User Manual
Sharp Ar M350 User Manual
Toshiba Answering Machine Vp 300s User Manual
Toshiba Eo1 33088 User Manual
Tripp Lite Bp48v75 6u User Manual
White Rodgers Sst2000 User Manual
Xerox Smartsend 3 User Manual
Xerox Workcentre M118 User Manual