Facsimile
Quick Reference Guide
Model No.
KX-PW308DL
KX-PW308DW
Main unit:
KX-PW308
Portable handset: KX-FKN526
KX-PW308DL
Thank you for purchasing a Panasonic facsimile.
Table of Contents
Finding the controls …………………………………………………………… 2
Installations and connections ………………………………………………… 4
Setting the date and time……………………………………………………… 7
Setting your facsimile telephone number …………………………………… 7
Setting your logo ……………………………………………………………… 8
Character input and command key table …………………………………… 9
Voice guide…………………………………………………………………… 10
Automatic dialing on the main unit ………………………………………… 11
Automatic dialing on the portable handset (KX-FKN526) ……………… 13
Intercom ……………………………………………………………………… 14
Sending faxes ……………………………………………………………… 15
Receiving faxes……………………………………………………………… 16
Operating the built-in answering device ………………………………… 17
Call block …………………………………………………………………… 19
Specifications ………………………………………………………Back cover
This guide explains some basic features and operations, but not all of them.
For further details, see the Japanese operating instructions.
This product is designed for use in Japan.
Panasonic cannot provide service for this product if used outside Japan.
Any details given in this guide are subject to change without notice.
This unit is equipped with the voice guide features. (Japanese only)
For details about voice guide, please see page 10.
Finding the controls
Portable handset (KX-FKN526)
Liquid crystal display
Earpiece
How to use
key
●
To use the phonebook.
●
To redial the phone
numbers in the redial list.
The last 10 phone
Portable handset number
(and name)
numbers dialed are
stored in memory.
No link to the main unit
Function menu that is
●
To adjust the volume.
controlled by
or
Battery strength
●
To make/answer calls.
How to use
buttons
●
●
To end a call.
To end or exit from editing or
other operations.
and
buttons refer to the function
displayed on the bottom of the display.
They function differently depending on
the mode.
●
●
To put a call on hold.
To start a search in the
Number Display log.
(For Number Display
service users.)
Secure button
● While the portable handset is
ringing, press this button. The
portable handset announces
a message to the caller. The
message is announced in
Japanese and means “This
unit is currently set to Caller
Verifying mode. Could you
please speak out your
name?”.
●
●
To page the main unit
and/or portable handset(s).
To change the character
input mode.
Dial buttons
Tone button
●
To switch to tone dialing.
Sharp button
Key lock button
●
■
To talk to the caller,
press
To hung up, press
Microphone
.
To lock the portable
Do not cover the
microphone while
talking.
■
.
handset so that no calls
or setings can be made.
To turn key lock on,
Mute button
●
To mute your voice to the
other party by pressing this
button.
press this button for
about 3 seconds until a
single beep is heard.
(To release the mute,
press this button again.)
●
To turn key lock off,
press this button for
about 3 seconds until
a single beep is heard.
●
For call waiting service
users.
●
●
To clear letters/numbers.
To use the speakerphone.
3
Installations and connections
Installing the ink film
1
2
3
Open the control panel.
Open the back cover.
Insert the ink film.
Insert the orange
gear into the left slot
of the main unit.
Insert the white gear into the right slot
of the main unit.
4
5
If the ink film is slack, tighten it by
winding this gear (orange)
.
Close the back cover pressing
” down on both sides
“
until it clicks into place.
6
Close the control panel.
When the unit runs out of ink film, the following message will be displayed.
ﾌｨﾙﾑｶﾞ ﾅｸﾅﾘﾏｼﾀ
ｺｳｶﾝｼﾃｸﾀﾞｻｲ U23
ﾌｨﾙﾑｶﾞ ﾅｸﾅﾘﾏｼﾀ
ﾋﾝﾊﾞﾝ:K X
-
F A N190
Install a new ink film.
Replacement ink film:
KX-FAN190 (15 m)
KX-FAN190W (15 m X 2)
KX-FAN191 (15 m) (*1)
KX-FAN191W (15 m X 2) (*1) ￥1,523
￥714
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
than does the KX-FAN190/190W.
￥1,208
￥893
・As of August 2008.
・Tax included.
4
Installations and connections
Installing recording paper (A4 size)
1
2
Open the recording paper tray.
Set up the recording paper stands.
Pull out the front stand first.
3
Insert the recording paper into the
recording paper tray. (Up to 15 sheets)
Recording paper
Printing side is
on the back.
Fan the stack of recording paper.
Folding the recording paper tray
1 Remove the recording paper and fold the recording
2 Close the recording paper tray.
paper stands in.
5
Installations and connections
Connecting the main unit
Setting up the portable handset
(KX-FKN526)
1
Raise the antenna.
1
Press
on the battery cover and slide the cover.
2
Connect the cord and
place the handset on
the main unit.
2
Insert the battery into the compartment and close the
battery cover.
Telephone line cord
(supplied accessory)
Wall jack
3
Connect the telephone line cord.
Battery
Power cord
Power outlet
(AC 100 V)
3
Connect the charger to the power outlet, then place
the portable handset on the charger for about
10 hours.
4
Connect the power cord.
Power outlet
(AC 100 V)
After the Power On...
1 This unit will automatically select the dialing
mode (Pulse/Tone).
2 When the following is displayed, press
ｴﾗﾝﾃﾞｹｰﾀｲﾉｾｯﾃｲ
(Stop).
［
ｹｯﾃｲ］ｵｽ
If you cannot make a call...
Set the dialing mode with the main unit.
1. Press
(Function/Resolution).
.
2. Press
3. Press
(Search button) repeatedly until the
Charger
desired setting is selected.
Example :
ﾌﾟｯｼｭ: Tone
ｶｲｾﾝｼｭﾍﾞﾂ
＝
ｼﾞﾄﾞｳ
After your Panasonic battery is fully charged,
［
ｾﾝﾀｸ
］
→
［
ｹｯﾃｲ
］
ｵｽ
20: Pulse (20 PPS)
10: Pulse (10 PPS)
ｼﾞﾄﾞｳ: Auto (Default)
it will last up to about 5 hours of conversation.
4. Press
(Set).
5. Press
(Stop).
6
Setting the date and time
Setting your facsimile
telephone number
1
Press
(Function/Resolution).
1
2
Press
(Function/Resolution).
ｷﾉｳ ﾄｳﾛｸ ﾓｰﾄﾞ
ｷﾉｳ ﾄｳﾛｸ ﾓｰﾄﾞ
［
］ｵｽ
［
］ｵｽ
,
,
2
3
Press
Press
.
Press
Press
.
ﾋﾂﾞｹ・ｼﾞｺｸﾉ ｾｯﾃｲ
ｹｯﾃｲ ｵｽ
ｱﾅﾀﾉﾃﾞﾝﾜﾊﾞﾝｺﾞｳ
ｹｯﾃｲ ｵｽ
［
］
［
］
(Set).
3
4
(Set).
TEL
？
Example :
2008
年
11
月
30
日
15
：
00
Cursor
Enter your facsimile telephone number, up to
20 digits.
Example: 098 7654··
4
5
6
Enter the correct year/month/day.
Example: December 1, 2008
+
TEL
？
+098 7654..
Press
.
2008
年
12
月
01
日
15
：
00
To correct a mistake, press
(Flash/Erase).
Enter the correct hour/minute in a 24-hour clock entry.
Example: 15:45 (3:45 PM)
The
(Hold/Call memory)
button replaces the digit with a
space.
Press
.
2008
年
12
月
01
日
The
(Tone) button replaces
15
：
45
the digit with “+”.
Press
(Set).
5
6
Press
(Set).
ﾄｳﾛｸ ｼﾏｼﾀ
ﾄｳﾛｸ ｼﾏｼﾀ
ﾋﾂﾞｹ・ｼﾞｺｸﾉ ｾｯﾃｲ
ｹｯﾃｲ ｵｽ
ｱﾅﾀﾉﾃﾞﾝﾜﾊﾞﾝｺﾞｳ
［
］
［
ｹｯﾃｲ］ｵｽ
7
Press
(Stop).
Press
(Stop).
Example :
Example :
12
月
1
日
15
：
45
12
月
1
日
15
：
45
ﾖｳｹﾝ ﾛｸｵﾝ
0
ｹﾝ
ﾖｳｹﾝ ﾛｸｵﾝ
0
ｹﾝ
7
Setting your logo
Example: Micah
1. Press
once.
ﾅﾏｴ
？
[ AB]
[ AB]
M
Cursor
2. Press
six times.
six times.
ﾅﾏｴ
？
M
i
3. Press
ﾅﾏｴ
？
[ AB]
M
i c
1
Press
(Function/Resolution).
4. Press
to move the cursor to the next space,
four times.
ｷﾉｳ ﾄｳﾛｸ ﾓｰﾄﾞ
［
］ｵｽ
,
then press
ﾅﾏｴ
？
[ AB]
M
i c a
2
3
Press
Press
.
ｱﾅﾀﾉﾅﾏｴ
5. Press
five times.
［
ｹｯﾃｲ ｵｽ
］
ﾅﾏｴ
？
[ AB]
M
i c ah
(Set).
ﾅﾏｴ
？
[
ｶﾅ
]
5
6
Press
(Set).
Cursor
ﾄｳﾛｸ ｼﾏｼﾀ
ｱﾅﾀﾉﾅﾏｴ
4
Enter your logo, up to 30 characters, using the dial
keypad.
To enter English characters easily, press
［
ｹｯﾃｲ］ｵｽ
(Intercom) repeatedly and select “AB” (English and
sign input mode).
For details, see the table on page 9 for instructions.
Press
(Stop).
Example :
12
月
1日
15
：
45
ﾖｳｹﾝ ﾛｸｵﾝ
0
ｹﾝ
8
Character input and command key table
Pressing the dial keys will select a character as shown below.
Character
Katakana
English and signs
Numbers
Display of the
main unit and the
portable handset
［ｶﾅ］
［
AB］
［
12］
Dial key
Portable
handset
KX-FKN526
Main
unit
(
)
(
)
アイウエオ
ァィゥェォ
^
@ . _ – & $ ¥ % + = ~
1
カキクケコ
A B C a b c
D E F d e f
2
3
4
5
6
7
8
9
0
サシスセソ
タチツテトッ
ナニヌネノ
ハヒフヘホ
マミムメモ
ヤユヨャュョ
ラリルレロ
ワヲンー！？ ( )
゛°、。
G H I g h i
J K L j k l
M N O m n o
P Q R S p q r s
T U V t u v
W X Y Z w x y z
! ？ / ー
、。
# ‚ ; : ｜・ ’ ” （ ） [ ] ｛ ｝〈 〉「 」
Used to change the character
input mode.
(Main unit),
(Main unit)
(Portable handset)
Used to move the cursor to the
right.
Used to move the cursor to the
left and right.
Command keys
(Portable handset)
(Main unit),
Used to delete a character.
Used to insert a space.
(Portable handset)
(Portable handset)
(Main unit),
The characters on the display are somewhat different from those shown in the character input and command key table.
9
Voice guide
Operation guide
The unit starts the following voice guidance in Japanese:
Operations
To cancel the operation guide (using the main unit)
Send a fax
(Select “ ”)
ﾅｼ
Copy
Store phone numbers in the one-touch
dialers
(Select “ ”)
ﾅｼ
Make a call using the phonebook/redial/
call memory
Change a ink film
(Select “ ”)
ﾅｼ
Print fax documents from the main unit
memory
(Select “ ”)
ﾅｼ
Reading-out dial
The unit announces the number dialed in Japanese, when you make a call with the main unit.
To cancel the reading-out dial
(Select “ ”)
ﾅｼ
10
Automatic dialing on the main unit
Storing names and telephone
numbers in the phonebook
Making a voice call using the
phonebook
To use the phonebook on the main unit, you need to
transfer the stored phonebook of the portable handset to
the main unit. (You cannot store directly in the phonebook
on the main unit.)
Store names and telephone numbers in the portable
handset phonebook before using this feature
(see page 13).
Transferring the phonebook entries from the portable
handset to the main unit
1
2
Press
Press
(Phonebook).
(Search button) repeatedly until the
desired name is displayed.
3
Lift the handset.
1
2
Press
Press
.
Erasing a stored name and
number in the phonebook
.
ﾃﾞﾝﾜﾁｮｳ ﾃﾝｿｳ
3
Press
Press
.
.
ﾃﾝｿｳｻｷ
ｾﾝﾀｸﾊ
=
ｵﾔｷ
ｵｽ
［
］
,
4
5
To transfer a stored phonebook entry individually
1 Press
.
2 Press
(Search button) repeatedly until the
desired name is displayed.
1
2
Press
Press
(Phonebook).
3 Press
.
To transfer other names, repeat steps 2 and 3.
(Search button) repeatedly until the
4 After the “ ﾃﾝｿｳ ｼﾏｼﾀ ” (Transfer complete) is
displayed, press (Off).
desired name is displayed.
3
4
Press
Press
(Erase).
To transfer all of the stored phonebook entries
1 Press
“ ﾃﾞﾝﾜﾁｮｳ
2 Press
(Search button) repeatedly to select
.
=
ｲｯｾｲ” (Transfer all).
twice.
5
Press
(Stop).
3 After the “ ﾃﾝｿｳ ｼﾏｼﾀ ” (Transfer complete) is
displayed, press (Off).
11
Automatic dialing on the main unit
Storing telephone numbers in the
one-touch dialers
Making a voice call using the
one-touch dialer
You can store a telephone number in each one-touch
dialer.
1
2
Lift the handset.
Press the one-touch dialer (
or
).
1
2
Press
(Function/Resolution).
ｷﾉｳ ﾄｳﾛｸ ﾓｰﾄﾞ
［
］ｵｽ
,
Erasing a stored number in the
one-touch dialer
Press the one-touch dialer (
or
).
Example: one-touch dialer 1
One-touch dialer number
ﾜﾝﾀｯﾁ
1
ﾄｳﾛｸ ｦ ｶｲｼｼﾏｽ
T E L
？
3
4
Enter the telephone number, up to 24 digits.
To correct a mistake, press
(Flash/Erase).
The
(Hold/Call memory) button replaces the
digit with a space.
1
2
3
4
Press
(Function/Resolution).
Press
(Set).
Press the one-touch dialer (
or
).
Press
Press
(Flash/Erase).
(Set).
12
Automatic dialing on the portable handset (KX-FKN526)
Storing names and telephone
numbers in the phonebook
Making a voice call using the
phonebook
1
2
Press
Press
(Phonebook).
1
2
Press
(Phonebook).
(Search button) repeatedly until the
ｹﾝｻｸﾊ
［
］
ｵｽ
,
desired name is displayed.
3
Press (Talk).
Press
.
“XXX” shows the remaining
station numbers you can store.
You can program up to
ﾅﾏｴ
？
［
ｶﾅ
×××ｹﾝ
］
ｱｷ
Editing a stored name or number
in the phonebook
150 stations, including
4 pre-programmed stations.
1
2
Press
(Phonebook).
3
Enter the name, up to 12 characters (see the table on
page 9 for instructions).
Press
(Search button) repeatedly until the
desired name is displayed.
3
4
Press
.
4
5
Press
.
Edit the name (see the table on page 9 for
instructions).
Enter the telephone number, up to 24 digits.
If you do not need to edit the name, skip to step 5.
To correct a mistake, press
(Flash/Erase).
5
6
Press
.
6
7
8
Press
.
Enter the correct telephone number.
If you do not need to edit the telephone number,
Enter the group number (
to
).
skip to step 7.
7
8
Press
.
Press
.
To program other items, repeat steps 3 to 8.
Edit the group number.
If you do not need to edit the group number, skip to
step 9.
9
Press
(Off) to exit the program.
9
Press
.
10Press
(Off) to exit the program.
13
Intercom
An intercom is available between the portable handsets or between the main unit and portable handset(s).
Using the main unit:
Using the portable handset (KX-FKN526):
1
For single portable handset users
1
For single portable handset users
Press (Intercom).
1 Lift the handset.
ﾃﾞﾝﾜﾊﾞﾝｺﾞｳ
?
For multiple portable handset users
1 Press (Intercom).
2 Press
(Intercom).
ｺｷ
1
ﾖﾋﾞﾀﾞｼ ﾁｭｳ
2 Call the main unit and/or portable handset(s) in
the following ways:
– To call a specific portable handset, press the
For multiple portable handset users
1 Lift the handset.
portable handset number (
you want to call.
to
) which
2 Press
(Intercom).
– To call the main unit, press
.
– To call the main unit and all the portable
3
Call the portable handset(s) in the following ways:
– To call a specific portable handset, press the
handsets, press
.
portable handset number (
you want to call.
to
) which
– To call all the portable handsets, press
.
2
3
Start talking.
ﾅｲｾﾝﾂｳﾜ ﾁｭｳ
2
3
Start talking.
Press
(Off) to end the intercom call.
Example :
ｺｷ
1
ﾅｲｾﾝﾂｳﾜ ﾁｭｳ
Replace the handset to end the intercom call.
14
Sending faxes
Sending a fax manually
Sending a fax using automatic
dialing
Document
Document
Document cover
F
A
CE U
F
A
CE U
P
P
Document
guides
Using the phonebook
1
2
3
Open the document cover, and adjust the width of the
document guides to the size of the document.
1
Insert the document (up to 5 pages) FACE UP until a
single beep is heard.
2
3
Press
(Phonebook).
Insert the document (up to 5 pages) FACE UP until a
single beep is heard.
Press
(Search button) repeatedly until the
If necessary, press
(Search button)
desired name is displayed.
repeatedly to select the desired resolution while
“ ｶﾞｼﾂ
=
” is displayed (see below).
(Fax).
4
Press
(Fax).
The unit will start fax transmission.
4
5
6
Press
Using the one-touch dialer
Dial the fax number.
1
2
Insert the document (up to 5 pages) FACE UP until a
single beep is heard.
Press
(Fax).
The unit will start fax transmission.
Press the one-touch dialer (
or
).
The unit will start fax transmission.
To select the resolution
Select the desired resolution according to the type of document, by pressing
displayed.
repeatedly while “ ｶﾞｼﾂ
=
” is
To display “ ｶﾞｼﾂ
=
”, press
(Function/Resolution) once or twice.
(Standard) for printed or typewritten originals with normal-sized characters.
(Fine) for originals with minute printing.
ｶﾞｼﾂ
ｶﾞｼﾂ
ｶﾞｼﾂ
＝
＝
＝
ﾌﾂｳｼﾞ
［
］
,
,
,
ﾁｲｻｲ
ｼｬｼﾝ
［
［
］
］
(Photo) for originals containing photographs.
15
Receiving faxes
Receiving a fax manually
(AUTO ANSWER off)
2
When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
Using the main unit:
press
.
3
4
Press
(Search button) repeatedly until the
“ ﾌｧｸｽ ｼﾞｭｼﾝ ” is displayed, then press
.
Press
.
The main unit will start fax reception.
1
2
When you hear a ring, lift the handset to answer the
call.
Receiving a fax automatically
(AUTO ANSWER on)
When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
light on
press
(Fax), then replace the handset.
The unit will start fax reception.
Using the portable handset (KX-FKN526):
1
2
If the
(Auto answer) light is off, turn it on by
pressing
.
When receiving a call, the unit will receive a fax
document or record a voice message automatically
depending on the caller’s request.
1
When you hear a ring, lift the portable handset from
the charger, then press (Talk) to answer the call.
16
Operating the built-in answering device
Recording your own greeting
message
Activating the answering device
1
2
Turn the
(Auto answer) light on by pressing
.
light on/
flash
When receiving a call, a greeting message will be
played and the unit will record a voice message.
To record your own greeting message, see left.
Listening to recorded messages
When new messages are recorded, the
answer) light will flash.
(Auto
Press
to listen to recorded messages.
You can record your own greeting message. When
receiving a call, it will be played to callers instead of the
pre-recorded Japanese greeting message.
After the messages are played back, the following will be
displayed.
To erase the messages, press
To save the messages, press
.
ｻｲｾｲｼﾀﾖｳｹﾝｼｮｳｷｮ
ｽﾙ
＝
ｼﾅｲ＝＃
.
1
2
Press
Press
(Function/Resolution).
.
Listening to all of the recorded
messages
ｼﾞｻｸ ｵｳﾄｳ ﾛｸｵﾝ
ｹｯﾃｲ ｵｽ
［
］
Press
recorded.
(Playback) when new messages are not
3
4
5
Press
(Set).
When new messages are recorded, only the new
messages will be played back.
Lift the handset.
After all of the recorded messages are played back, the
following will be displayed.
Press
(Set) and speak your greeting message
after a beep, up to 16 seconds, to the handset.
To erase the messages, press
.
ｽﾍﾞﾃ ｼｮｳｷｮｼﾏｽｶ
？
ﾊｲ
＝
ｲｲｴ＝＃
To save the messages, press
.
6
Press
(Stop) and replace the handset.
Your greeting message will be played back
automatically.
Erasing a specific message
Press
(Flash/Erase) while listening to the
message you want to erase, then press
.
Erasing your own greeting
message
Erasing all of the recorded
messages
1
2
Press
Press
(Function/Resolution).
.
1
2
Press
(Function/Resolution).
ｼﾞｻｸ ｵｳﾄｳ ｼｮｳｷｮ
ｹｯﾃｲ ｵｽ
［
］
Press
.
ﾖｳｹﾝ ｾﾞﾝｼｮｳｷｮ
ｹｯﾃｲ
3
4
Press
(Set).
［
］
ｵｽ
3
4
Press
Press
(Set).
Press
.
The pre-recorded Japanese greeting message will
be played when you receive a call.
.
17
Operating the built-in answering device
Operation: Listening to a recorded message from a
Operating the answering device
from a remote location
remote location
Turn the
(Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
light on
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
2
3. Press or wait 4 seconds.
Only the new recorded messages will be played
back.
4
To listen to all the recorded messages, press
.
Preparation: Programming the remote operation ID
1. Press
(Function/Resolution).
.
2. Press
3. Enter any 4-digit number (remote operation ID) except
or #.
Example :
ｱﾝｼｮｳ No
.
＝1234
［
4
ｹﾀ
］
→
［
ｹｯﾃｲ ｵｽ
］
4. Press
(Set).
5. Press
(Stop).
18
Call block
Blocking the incoming calls
Using the main unit:
Using the portable handset (KX-FKN526):
To block a call using a message
While the unit is ringing, press
OR
(Block).
While you are on an incoming call, press
(Block),
then press
.
1
2
While the unit is ringing, press
OR
.
The unit announces a message to the caller 2 times,
then hangs up automatically. The message is
announced in Japanese and means
While you are on an incoming call, press
press (Search button) repeatedly until the
“ ﾂｳﾜ ｷｮﾋ ” is displayed.
, then
“We’re sorry, but your call cannot be connected.”.
To block a call using chimes
Press
.
1
2
While you are on an incoming call, press
(Block).
The unit announces a message to the caller 2 times,
then hangs up automatically. The message is
announced in Japanese and means
Press
.
Chimes are heard by the caller.
“We’re sorry, but your call cannot be connected.”.
3
Tell the caller that a visitor has come and hang up.
For Number Display service subscribers
If you subscribe to Number Display service, the message
heard by the caller will change according to the caller’s
situation.
For Number Display service subscribers
If you subscribe to Number Display service, the message
heard by the caller will change according to the caller’s
situation.
Example :
Example :
If the caller requested not to send caller’s
information, the message heard by the caller will
change to mean
“Your phone number is blocked by service provider.
Please call again with adding ‘186’ to the beginning
of the phone number.”.
If the caller requested not to send caller’s
information, the message heard by the caller will
change to mean
“Your phone number is blocked by service provider.
Please call again with adding ‘186’ to the beginning
of the phone number.”.
When the following is displayed after operating step 1
and 2, you can set the unit to block the call from the same
telephone number.
When the following is displayed after pressing
(Block), you can set the unit to block the call from
the same telephone number.
ﾒｲﾜｸ ｾｯﾃｲ
？
To block the call, press
.
To block the call, press
.
ﾊｲ
＝
ｲｲｴ
＝
＃
ﾒｲﾜｸ ｾｯﾃｲ ｼﾏｽｶ
？
To cancel blocking, press
.
ﾊｲ
＝
ｲｲｴ＝＃
To cancel blocking, press
.
When the following is displayed, press
to cancel.
When the following is displayed, press
to cancel.
ｷｮﾋ ｾｯﾃｲ
？
ｷｮﾋ ｾｯﾃｲ ｼﾏｽｶ
？
ﾊｲ
＝
ｲｲｴ
＝＃
ﾊｲ
＝
ｲｲｴ＝＃
19
Specifications
KX-PW308DL
KX-PW308DW
Portable handset
(KX-FKN526)
Main unit
Battery charger
Ni-MH battery
Power supply
AC 100 V (50 Hz/60 Hz)
(Part no. KX-FAN51)
DC 3.6 V, 650 mAh
AC 100 V (50 Hz/60 Hz)
Transmission: Approx. 10 W
• Charging:
Reception:
Copy:
Stand by:
Approx. 13 W
Approx. 16 W
Approx. 0.7 W
Approx. 1.2 W
• Stand by:
Power
consumption
Approx. 0.5 W
(When the F-net service is not in use.)
Maximum(*1): Approx. 130 W
(When the portable handset
is off the charger.)
Approx. 86 X 296 X 191 mm
(without handset, projections)
Approx. 265 X 296 X 231 mm
(recording paper tray opened,
without handset, projections)
Dimensions
(H x W x D)
Approx. 171 X 44.5 X 33.5 mm Approx. 34 X 72.5 X 100.5 mm
Approx. 2.4 kg
(10 m ink film installed)
Approx. 157 g
Approx. 160 g
(battery installed)
Mass (Weight)
Operating
environment
5 °C – 35 °C, 45 % – 85 % RH (Relative Humidity)
KX-PW308DL
KX-PW308DW
Applicable line
Main unit
Public Switch Telephone Network (Pulse/Tone), F-Net, NCC Lines
DC resistance
275 W
Compatibility
G3 compatible
Document size
A4–A5 (Max. 210 mm in width, Max. 600 mm in length)
208 mm (A4)
Effective scanning size
Effective printing size
Transmission time
Modem speed
202 mm (A4 size plain paper)
Approx. 15 s/page (Original mode) (*2)
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic fallback
64-level
Halftone level
Horizontal: 8 pels/mm
Vertical : 7.7 lines/mm (Fine/Photo), 3.85 lines/mm (Standard)
Scanning density
Scanner type
Contact image sensor
Printer type
Thermal transfer printing on plain paper
Modified Huffman (MH), Original mode
A4: 210 mm x 297 mm (Plain paper)
Data compression system
Recording paper size
Greeting message: Digital recording system (up to 16 sec)
Pre-recording greeting message
Answering device
Memory capacity
ICM Recording:
Digital recording system (Approx. 12 min. in total) (*3)
Max. Approx. 50 pages (Only receiving fax etc.) (*4)
Max. Approx. 12 min. (Only recording message) (*3)
*1 When copying a 100 % black document.
*2 Transmission speed is based on an A4-size document of 700 characters sent in standard resolution at 9,600 bps. The
actual transmission speed depends upon the contents of the page, resolution, telephone line conditions and capability
of the other party’s machine.
*3 If there is a silent pause, the total recording time will be longer.
*4 The memory capacity is based on an A4-size document of 700 characters sent in standard resolution
(8 x 3.85 lines/mm).
C
2008 Panasonic Communications Co., Ltd. All Rights Reserved.
PNQX1620ZA FK0708TA0
|