Child lock - only on HB22
Functional description
Transmitter HB12 + HB22:
Enable/Disable Child lock
1. Remove 1 battery and wait 15 seconds
2. Press both buttons on second row and keep the keys pressed
3. Mount the battery at the same time (the keys are pressed)
4. The child lock function is now enabled
Up – down head motor
Up – down foot motor
Simultaneous up/down
2.
3.
This is only an additional guideline
Should you have further questions, please contact the
bed manufacturer
Unlock of Child lock
Press up and down keys of the 2nd row at the same time for one
sec.
Is only valid for the motor part (TWINDRIVE® system).
TWINDRIVE® RF based Systems
without Memory
When the blue LED turns on the handset is unlocked.
The handset is not unlocked If the keys are not released again
before the blue led turns off.
Lock
If no keys are pressed for 10 seconds, the handset will lock again.
Factory settings (disabled childlock)
Dismount 1 battery and wait 15 seconds. Mount the battery
and the HB is back to factory setting.
|