WASHING MACHINE
ZWN 1220 W
ZWN 1420 W
ZWN 1420 G
Z
W
N
12
20
W
Delay
Cottons
Synthetics
Delicates
Wool
Handwash
95°C
60°C
40°C
30°C
Cold
1200
900
700
500
Night Cycle
Prewash
Prewash
sh
Rinses
Spin
Drain
Wa
Super
Soak
Rinse
Skip/
On / Off
S
tart/
Reset
Extra
40
°
AA
Pause
Quick
Options
Fabric
Te
mperature
Spin Speed
Quick Installation Guide:
visit our WEB SITE to view an install video
GB
INSTRUCTION BOOKLET
132983440
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Wash Care Symbols
Washing Programmes
16
17
For the User
Important Safety Information
Your New Washing Machine
2
4
Maintenance and Cleaning
Descaling
18-19
18
Description of the Appliance
Detergent dispenser drawer
Door locked light
5
5
5
5
After each wash
Maintenance Wash
External cleaning
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the filter
Cleaning the water inlet filter
The dangers of freezing
Emergency emptying out
18
18
18
18
Child safety feature
18
The Control Panel
Turning the acoustic signal off
6-10
6
18-19
19
Operating Sequence
Load the laundry
Measure out the detergent
11-13
11
19
19
11
Measure out the fabric softener
Switch the machine on
Select the required programme/fabric
Select the temperature
Select the spin speed or the Night Cycle option
Select the desired options
11
11
11
Something Not Working
Service and Spare Parts
Guarantee Conditions
20-21
21
22
11-12
12
For the Installer
12
Select the Super Rinse or 40°AA option
Select the Delay Start
Start the programme
12
12
13
Installation Instructions
Technical Specifications
23
23
Unpacking
Positioning
Installation on a suspended floor
Water inlet
Water drainage
24
24
25
How to change a programme during its cycle
How to cancel a programme during its cycle
How to open the door during the cycle of
a programme
13
13
25
13
13
25-26
26
End of programme
Levelling
Washing Hints
Which detergent?....
And in which form?
14-15
15
Special conditions
In the interest of the environment
Electrical connection
26
26
27
15
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Your New Washing Machine
Your new washing machine, which is fitted with the New Jet System, meets all modern
requirements for effective treatment of laundry with low water, energy and detergent
consumption.
Even small loads are washed “economically” because the amount of water used is regulated
automatically according to the load and type of fabric.
●
Automatic cooling of the wash water to 60°C
In the interest of the
before draining, with the 95°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
environment
●
Materials marked with the symbol
recyclable.
are
●
●
The special wool programme with its new delicate
wash system treats your woollens with extreme care.
●
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
The balance control device ensures that the
washing machine remains stable when spinning.
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
Ecological hints
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
●
Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. For more detailed information about
recycling of this product, please contact your local
city office, your household waste disposal service or
the shop where you purchased the product.
●
The machine works more economically if it is fully
loaded.
●
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
●
Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
How do we help to protect the environment?
We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed “Something
Not Working”.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the Appliance
1
2
1 Detergent dispenser drawer
2 Control panel
12
2
0
W
Z
W
N
Delay
Cottons
Synthetics
Delicates
Wool
Handwash
95°C
60°C
40°C
30°C
Cold
1200
900
700
500
Night Cycle
Prewash
Soak
Prewash
Was
h
Super
Rinse
Rinses
Spin
Drain
Skip/
Reset
On / Off
Sta
rt/
3 Door locked light
4 Door opening handle
5 Filter
Extra
Quick
40°
AA
ause
P
Options
Fabric
T
e
mperature
Spin Speed
6 Adjustable feet
3
4
Door locked light
It stays on during the whole programme indicating that
the door is locked.
5
6
When the light goes out, the door can be opened (see
page 13).
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
C0063
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
P1076
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel
ZWN 1220 W
W
20
12
N
ZW
Delay
sh
wa
Pre
1200
900
700
500
Night
Cottons
Synthetics
95°C
60°C
40°C
30°C
Cold
h
as
h
es
ew
Pr
as
W
r
pe
Su
k
Soa
Delicates
Wool
ins
R
se
Rin
/
ip
Sk
On / Off
in
Sp
/
a
rt
St
t
se
Re
a
Extr
AA
40
°
e
aus
Cycle
P
n
ai
Dr
Handwash
ck
Qui
ns
tio
Op
ed
Spe
Spin
re
Temp
eratu
Fabric
1
2
3
4
5
6
7
8
9
10
11
The relevant light will light up.
1 “On/Off” button
Maximum temperatures are 95°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed
Press this button to switch the washing machine on.
The display (8) will show three flashing dashes or a
flashing zero. You will find more detailed explanations
on pages 7-8 (see “Display”).
(Wool
and Handwash
programmes).
Press the On/Off button again to switch the machine off.
IMPORTANT!
By pressing the “Temperature” and “Spin Speed”
buttons simultaneously for about 3 seconds, the
acoustic signal is deactivated at the end of the cycle,
when selecting the programmes and in case of an
incorrect option selection .
2 “Mains-on” light
This light is connected to the “On/Off” button. It lights
up when you press the button, and goes out when you
press it again.
By pressing these 2 buttons again the acoustic signal
is reactivated.
3 “Fabric” button
Press this button repeatedly to select the programme on
the basis of the type of laundry to be washed. The light
relevant to the selected programme will light up. The
washing machine will propose a temperature and
automatically select the maximum spin value provided
for the programme you have chosen. You can change
these values by operating buttons 4 and 5.
5 “Spin Speed” button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine. The
relevant light will light up.
Wool
and Handwash
Maximum speeds are:
When you select these programmes, you obtain a
particularly delicate wash, suitable for woollens and
articles of clothing whose label indicates that they must
• for cotton: 1,400 or 1,200 rpm depending on the
model;
• for synthetic fabrics, wool and fabrics to be hand-
washed: 900 rpm;
be hand-washed
.
• for delicate fabrics: 700 rpm.
4 “Temperature” button
• “Night cycle” position:
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine.
when you choose this option, the machine will not drain
the water of the last rinse, so as not to crease the
laundry.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
As all spinning phases are suppressed, this washing
cycle is very quiet and it can be useful at night or in
times with a more economical power rate.
The soak ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
On cotton and synthetic programmes the rinses will be
performed with more water.
If you have selected the Prewash or Soak option, pour
detergent into the appropriate compartment marked
At the end of the cycle, the door is locked (door locked
light on), the light of the “Start/Pause” button goes out,
the light of “Night Cycle” button remains lit to indicate
that the water must be drained and a flashing zero will
appear on the display.
• Extra Quick: select this option for laundry that is
only slightly soiled (not available for Wool
and
Handwash
programmes).
The washing time will be reduced according to the
type of fabric and the selected temperature.
To complete the cycle, press “Skip Reset” button once,
all the leds are off, the display will show three flashing
dashes, then press “Fabric” button in order to select the
desired programme.
The Prewash, the Soak and the Extra Quick options
cannot be selected together by means of the same
button.
If you wish to drain or spin press the “Skip Reset”
Press the second button to select the following options:
button until the led of the desired function illuminates.
You can change the spin speed by means of “Spin
Speed” button and then depress “Start/Pause” button.
• Super Rinse: this option can be selected with all
programmes except Wool
and Handwash
programmes. The machine will add 2 rinses to the
cotton programmes and 1 rinse to the synthetic and
delicate programmes. This option is recommended for
people who are allergic to detergents, and in areas
where the water is very soft.
Important!
If you accidentally press the “Skip Reset” button more
than once, the display will show three flashing dashes.
To drain the water, select any washing programme by
means of the “Fabric” button, then press “Skip Reset”
three times in order to select the drain (only the “Drain”
light will remain lit), then press again the “Start/Pause”
button.
• 40° AA: this option can be selected for cottons and
synthetics lightly or normally soiled with a
temperature of 40°C or higher.
The washing temperature will be reduced and the
washing time will be prolonged in order to achieve an
AA class in energy efficiency and washing
performance. (not available in combination with
Extra Quick option).
6/7 “Options” buttons
Press the first button to select the following options:
• Prewash: for heavily soiled laundry.
Select this option if you wish your laundry to be
prewashed at 50° C before the main wash (not
The Super Rinse and the 40° AA options cannot be
selected together by means of the relevant button.
available for Wool
programmes).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
and Handwash
8 Display
The following pieces of information are shown on the
display:
• Three flashing dashes, when a programme is
cancelled by means of the “Skip Reset” button.
• Soak: for heavily soiled laundry.
The three flashing dashes will also appear when you
press the “On/Off” button to switch the machine on, if
the previously selected cycle has been erased.
Select this option if you wish to perform a soak of
about 30 minutes at 30°C before the washing to your
laundry. By pressing the “Delay” button the soak time
can be extended up to a maximum of 10 hours. After
this time the wash cycle will automatically start.
This function is not available for wool and hand-wash
cycles.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
• Delay start, a time value indicated in hours and
selected by means of the relevant button (max 23
hours).
---
•
Duration of washing programme in hours and
minutes, after you have selected a programme.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the “Start/Pause” button, the
countdown begins, and the delay time value decreases
by one unit every hour and then, when remain the last
2 hours each 30 min.
2.05
You can delay the start of the selected programme by
up to 23 hours in one hour intervals.
While the programme is running (after you have
pressed the “Start/Pause” button), the displayed time
value decreases by one unit every minute.
• An incorrect option selection has been made: this is
indicated by the message Err when a function
incompatible with the current programme is selected.
• The washing machine has stopped with water in the
tub, at the end of a programme with the “Night cycle”
option: this is indicated by a flashing zero.
• The washing machine has completed the
programme: this is indicated by a flashing zero. At
the same time, the door locked light goes out.
The zero will reappear when you switch the washing
machine on, unless the previous programme has been
erased by means of the “Skip Reset” button.
The incorrect selection is also indicated by an audible
warning signal.
• An alarm code indicates a fault in the machine
operation (see the relevant chapter on page 20).
0
E20
Important!
The first time you use the washing machine, when
you switch it on, it may display a flashing zero and give
an audible warning signal. This is due to the fact that the
washing machine has performed a washing cycle during
the manufacturer’s inspection tests, and this cycle has
not been erased after its completion.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a special programme:
A wash programme must be selected in the normal way.
(“Start/Pause” button not pressed)
9 “Start/Pause” button
This button has two functions:
• Start: after you have selected the desired programme
and options, press this button to start the washing
machine. The light above the button will stop flashing
and remain lit.
Start/
Pause
If you have selected a delay time by means of the
“Delay” button, the countdown will begin and will be
shown on the display.
• Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the
programme, press the button again.
The “Skip” button is then used to cancel or advance the
programme to the required phase.
The “Skip” button can only operate during the selection
of the programmes or when the programme is in pause.
When you PAUSE the cycle, the Door Locked light
goes out and it becomes possible to open the door,
provided
A normal wash cycle consists of the following phases,
Wash - Rinses - Spin and is confirmed by the
illumination of the corresponding LED,s.
• the washing machine is not in the heating phase;
• the level of the water is not high;
• the drum is not turning.
Important!
Prewash
Wash
You must set the washing machine to Pause before you
make any change in the programme in progress.
Rinses
Spin
10 “Skip/Reset” button
This button performs two functions:
Drain
- Clears the memory
To select rinses & spin, press the “Skip” button once,
the wash LED goes out.
- Selects special programmes
At the end of every programme the Reset button must
be pressed once or repeatedly to clear the programme
memory. This will be confirmed by three dashes,
flashing in the display.
If the previous programme is not cleared, the display
will show a “0” flashing and an audible signal will
sound, when you switch the machine on.
Prewash
Wash
Rinses
Spin
Drain
To select spin only, press the “Skip” button twice.
The wash & rinses LED,s go out.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
• If the “Soak” option has been chosen the selected
delay will correspond to the soak time. If no delay
time is selected the soak programme will last about 50
minutes.
Prewash
Wash
Rinses
Spin
• The door will be locked throughout the delay time
(Door locked light lit). If you need to open the door,
you must first set the washing machine to Pause by
pressing the “Start/Pause” button. After you have
closed the door, press the “Start/Pause” button again.
Drain
To select Drain only, press the “Skip” button three
times, the wash - rinses - spin LED,s go out.
The drain LED only remains alight.
12 Programme phase indicator
lights
When you select a programme, the lights relevant to the
phases that form the programme light up.
Prewash
Wash
Rinses
Spin
Drain
Prewash
Wash
Rinses
Spin
11 “Delay” button
Drain
This button makes it possible to delay the starting of the
programme selected from 30 min - 60 min - 90 min, 2
hours and then by 1 hour up to a maximum of 23 hours.
The delay you have selected is shown on the display for
about 3 seconds; afterwards, the duration of the
programme reappears.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
You must select this option after you have set the
programme and before you press the “Start/Pause”
button.
The time value shown on the display will decrease by
one unit every hour.
You can change the delay time at any moment,
before you press the Start/Pause button.
If you have already pressed the Start/Pause button, and
you wish to cancel the delay time, proceed as follows:
• set the washing machine to Pause by pressing the
“Start/Pause” button;
• press the “Delay” button until the display shows the
symbole «0’».
• press the “Start/Pause” button again.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Close the drawer gently.
4. Switch the machine on
Press the “On/Off” button to switch the machine on.
The display will show three flashing dashes or a flashing
zero. The light above the button will light up.
Pour 1/2 a measure of detergent into the main wash
compartment
machine.
of the dispenser drawer and start the
WASHING 6 KG OF WHITE COTTON AT 95°C
Suppose you have 6 kg of laundry to wash. It is white
cotton and is suitable for high temperature washing.
0
On/Off
1. Load the laundry
Open the door.
---
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
5. Select the desired programme/
fabric
Press the “Fabric” button repeatedly, in order to select
the desired programme/fabric. The relevant light will
light up (Cottons in this case).
The lights relevant to the phases that form the
programme will light up.
P1084
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The “Start/Pause” button
light will start flashing.
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the cycle.
main wash compartment
.
If you wish to carry out the prewash or a soak, pour
detergent into the appropriate compartment marked
.
Cottons
Synthetics
3.Measure out the fabric
softener
Prewash
Wash
Rinses
Delicates
Wool
Handwash
If required, pour fabric softener into the compartment
Spin
Drain
marked , without exceeding the «MAX» mark.
Fabric
6. Select the temperature
Press the “Temp.” button if you wish to select a
temperature value different from the one proposed by
the washing machine.
C0064
C0065
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The relevant light will light up.
The relevant light illuminates.
95°C
60°C
40°C
30°C
Cold
sh
Pre
k
Soa
a
Extr
k
Quic
Options
ature
Temper
7. Select the spin speed or the
Night Cycle option
Press the “Spin Speed” button repeatedly, in order to
select the desired spin speed or the Night Cycle option.
The relevant light will light up.
If you select the Night Cycle option, the machine will
stop at the end of the programme with the water still in
the tub.
9. Select the Super Rinse or
40°AA option
If you wish the laundry to undergo an extra rinse, select
the “Super Rinse” option.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the “40°
AA” option.
The relevant light illuminates.
ZWN 1220 W
ZWN 1420 W - ZWN 1420 G
r
pe
Su
1200
900
700
500
1400
1200
900
700
se
Rin
AA
40
°
Night Cycle
Night Cycle
Options
S
pin Speed
Spin
S
peed
10. Select the “Delay”
Before you start the programme, if you wish the start
to be delayed, press the “Delay” button repeatedly, or
keep it pressed, to select the desired delay. The selected
delay time value (up to 23 hours) will appear on the
display for 3 seconds, then the duration of the
programme will appear again.
8. Select the desired options
If your laundry is heavily soiled, it may be advisable to
select the “Prewash”option.
If you wish the laundry to undergo a soak, select the
“Soak” option.
If your laundry is only slightly soiled, select the “Extra
Quick” option.
Delay
12
Download from Www.Somanuals.com. All Manuals Search And Download.
If these requirements are met, when you pause the
washing machine, the door locked light goes off and the
door can be opened.
11. Start the programme
Press the “Start/Pause” button. The relevant light will
stop flashing and only the light relevant to the phase that
is in progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
Should it not be possible to open the door, and should it
be absolutely necessary to do so, switch the machine off
by pressing the “On/Off” button.
After approximately 3 minutes, you can open the door.
The display will show the duration of the programme or
the selected delay.
Pay attention to the level and temperature of the
water in the washing machine!
12. How to change an option or
a programme during its cycle
Before you make any change, you must pause the
machine by pressing the “Start/Pause” button.
It is possible to change the temperature or any option
before the programme carries it out.
When you close the door and press the “On/Off” button
again, the washing machine will resume the programme
from the point where it had been interrupted.
15. End of programme
At the end of the programme, the washing machine
stops automatically, gives an audible signal, the
“Start/Pause” button light goes off, and the display
shows a blinking zero.
Changing a running programme is possible only by
cancelling it and selecting a new programme.
The machine will resume the cycle from the beginning
and the washing water in the tub will not emptied out.
If you have selected the “Night Cycle” option, the door
is locked (the door locked light on), the Start/Pause
button light goes off, the pilot light of “Night Cycle”
remains lit to indicate that the water must be drained.
The display shows a flashing zero.
If it is necessary to drain the water, proceed as follows:
• PAUSE the machine by pressing the “Start/Pause”
button;
• press the “Skip/Reset” button repeatedly, until only
the “Drain” light remains lit;
When the programme has been completed, a blinking
zero appears on the display and the audible signal is
given.
Press the Skip Reset button repeatedly to erase the
programme that has just been carried out. If you
omit to do this, the next time you switch the washing
machine on, the flashing zero will appear on the
display and you will hear the audible signal.
• press the “Start/Pause” button again.
When the water has been drained, the display shows a
blinking zero. You may now select a new programme
and press the “Start/Pause” button to start it.
13. How to cancel a programme
during its cycle
To cancel a programme that is being carried out, first
pause the washing machine by pressing the
“Start/Pause” button, then press the “Skip/Reset”
button repeatedly, until the display shows three flashing
dashes.
Note: when you switch the machine on, if you must
erase the previously performed programme, it is also
sufficient to press the “Fabric” button and select a new
programme.
Press the “On/Off” button to switch the machine off.
The relevant light will go out.
Remove the laundry from the washing machine.
14. How to open the door during
the cycle of a programme
You can open the door, after having set the washing
machine to Pause, provided the following conditions
exist:
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get damaged
in a subsequent wash (e.g. by shrinking) or bleed colour
into another load of laundry.
• the washing machine is not in the heating phase
beyond 55°C;
We advise you to close the water supply tap and
disconnect the plug from the socket.
• the level of the water is not high;
• the drum is not turning.
Leave the door ajar in order to air the washing machine.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Hints
●
●
●
Do NOT overload the machine. Weigh the laundry the
White items should not be washed with coloured
items.
first few times you use the appliance.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
The average weights of the most common items are
listed below as a guide:
Use a good quality detergent suitable for automatic
washing machines.
1000g = 1 kg
●
●
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Use the correct quantities of detergent.
For wool, use gentle detergent only in small
quantities.
Pillow case
Tablecloth
●
●
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
Serviette
Tea towel
70-120 g
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre-
soak product or biological detergent.
Linen hand towel
Towelling hand towel
Towelling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
●
●
Only wool marked “Pure New Wool - washable,
preshrunk” can be washed in the the wool
programme; other types of wool should be washed
in Hand Wash programme.
Man’s shirt
Apron
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
●
Load the laundry loosely alternating large items with
small ones.
●
●
●
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they may
unravel.
●
Once you have finished using the machine, you are
advised to unplug it and turn off the water tap.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
●
●
●
When washing curtains, remove the hooks.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
●
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
And in which form?
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
Which detergent?....
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
the machine immediately upon placing the detergent in
the dispenser drawer.
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
WHITES
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
, start
NON BIOLOGICAL
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which
should be placed on top of the laundry, and at the back
of the machine drum.
COLOUREDS
For coloured items you should use a
detergent which is designed to clean
while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
DELICATE ITEMS
FABRIC CONDITIONERS
These are ideal for improving ‘softness’, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
When washing delicates such as
woollens, you should use a product
which is specially designed to care for
fine fabrics.
Dreft Automatic is suitable for
woollens and other delicates.
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
LAUNDRY BLEACH
For additional stain removal you may
wish to use a product such as Ace
Gentle Bleach which is used in addition
to your chosen detergent. Ace is
suitable for all washable fabrics
including silks, woollens and coloureds.
marked with the symbol
.
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
Normal (Maximum)
Normal (Maximum)
FABRIC
White Cotton or Linen
without Special Finishes
95
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
60
50
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
Reduced (Medium)
Normal (Maximum)
Reduced (Medium)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
40
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Wool, wool mixtures, Silks
Do not machine wash
40
Much Reduced (Minimum)
Hand wash only
BLEACHING
Chlorine bleach may be used
IRONING
Cotton, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Hot iron
Warm iron
Cool iron
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
with high heat setting
with low heat setting
May be tumble dried
A cross through any symbol means «DO NOT»
X
Important Notes
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
ZWN 1220 W - ZWN 1420 W - ZWN 1420 G
Consumption*
Type of laundry
and symbols on
labels
Programme/ Description of
Load
Available options
Energy
kWh
Water
litres
Time
h/min.
temperature
programme
60
95
Main wash at
60° - 95°C
3 rinses
Spin speed
/ Night Cycle
Prewash
Soak, Extra Quick
Super Rinse,
40° AA
2.1
59
Cottons
60° - 95°C
6 kg
2.20
White cotton:
e.g. sheets,
tablecloths,
Long spin
household linen
60
40
30
Main wash at
60°- 40°-30°C or
Cold
3 rinses
Long spin
6 kg
Cottons
60°- 40° -
30°C or Cold
Spin Speed
/ Night Cycle
Prewash
Soak, Extra Quick
Super Rinse
40° AA**
1.3
64
1.59
Coloured
cotton: e.g. shirts,
blouses, towels,
underwear, house-
hold linen
60
40
30
Main wash at
60° ca.
3 rinses
2.40
1.27
7 kg
3 kg
1.19
1.05
56
57
Cottons***
Spin Speed
/ Night Cycle
Prewash
White & Fast
60°C + 40° AA
Coloured cotton:
e.g. shirts, blouses,
towels, underwear
Soak
Long spin
Synthetics
60° - 40° -
30°C or Cold
50
Spin Speed
/ Night Cycle
Prewash
Soak, Extra Quick
Super Rinse
40° AA **
60
40
30
Main wash at
60° - 40° -30°C
or cold
3 rinses
Short spin
Synthetic fabrics
and blends: e.g.
shirts, blouses,
underwear
40
30
3 kg
58
0.65
62
Delicate
Delicates
40° - 30°C or
Cold
Main wash at
40° - 30°C or
cold
3 rinses
Short spin
Spin Speed
(Only for ZWN 1220W)
/ Night Cycle
Prewash,
fabrics: e.g.
acrylic fabrics,
viscose, polyester,
synthetic blends
Extra Quick
Super Rinse
40
30
57
57
Wool
2 kg
2 kg
0.45
0.45
60
60
Wool
40° - 30°C or
Cold
Spin speed
Main wash at
40°- 30°C
3 rinses
/ Night Cycle
Short spin
Handwash
Main wash at
40°- 30°C or cold
3 rinses
Spin speed
/ Night Cycle
Handwash
40° - 30°C or
cold
Short spin
*
This data is given purely as an indication: the consumption values may vary in relation to the quantity and type
of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest
temperature provided for each programme.
** Only at the temperature of 40°C or higher.
*** The “Cottons programme” at 60°C with the option 40° AA selected is the reference programme for the data
entered in the energy label, in compliance with EEC 92/75”:
Load: 7 kg, Energy: 1.19 kWh, Water: 56 litres, Time: 160 mins.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
Remove the drawer by pressing the catch downwards
and by pulling it out.
Flush it out under a tap, to remove any traces of
accumulated powder.
To aid cleaning, the top part of the additive
compartment should be removed.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
After each wash
C0068
P1086
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
Maintenance Wash
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
To run a maintenance wash:
●
The drum should be empty of laundry.
●
Select the hottest cotton wash programme.
●
Use a normal measure of detergent, must be a
P0038
powder (such as Ariel Futur).
External cleaning
Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
Cleaning the filter
The water drain filter
A clean filter is important for the correct operating of
the machine, and should therefore be cleaned after every
washing programme.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Open the filter door by pulling it towards the right.
Place a container under the filter to catch any spillage.
C0067
C0066
P1062
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Release the emergency emptying hose, place it in the
container, and remove its cap by unscrewing it.
It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
P1062
When no more water comes out, unscrew the filter and
remove it.
P1090
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
●
Turn off the water tap.
●
Unscrew the inlet hose.
●
P1061
Place the end of the emergency emptying hose and
P1060
that of the inlet hose in a bowl placed on the floor
and let water drain out.
Clean the filter under a running tap, then refit it,
screwing it fully in.
●
Screw the water inlet hose back on and reposition
the emergency emptying hose after having put the
cap on again.
●
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
Emergency emptying out
P0040
If the water is not discharged, proceed as follows to
empty out the machine:
Put the cap back on the emergency emptying hose,
place the latter back in its seat. Close the filter door.
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the filter door;
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle,
always wait until the appliance has finished the cycle,
and is empty. When replacing the cover, ensure it is
securely retightened so as to stop leaks and young
children being able to remove it.
• place a bowl on the floor and place the end of the
emergency emptying hose into the bowl. Remove its
cap. The water should drain by gravity into the bowl.
When the bowl is full, put the cap back on the hose.
Empty the bowl. Repeat the procedure until water
stops flowing out;
• clean the filter if necessary as previously described;
• replace the emergency emptying hose in its seat after
having plugged it;
• screw the filter cover again and close the door.
Cleaning the water inlet filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed
below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that one of the following alarm codes appears on the display and at the same
time the buzzer sounds:
E 10
E 2 0
E 40
-
-
-
: problem with the water supply
: problem with water draining
: door open
Once the problem has been eliminated, press the Start/Pause button
the problem persists, contact your local Service Force Centre.
to restart the programme. If after all checks,
Symptom
Possible causes
●
E 40
The door has not been closed. (
)
The machine does not start
●
The plug is not properly inserted in the power socket.
There is no supply at the socket.
The main fuse or the fuse in the plug has blown.
The “Start/Pause” button has not been depressed.
The “Delay”option has been selected.
●
●
●
●
●
●
●
●
E 10
The water tap is closed. (
The filter in the inlet hose is blocked. (
The inlet hose may be squashed or kinked. (
)
The machine does not fill
E 10
)
E 10
)
E 40
The door has not been closed. (
)
●
●
●
The machine fills then empties
immediately
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
●
●
●
●
E 2 0
The drain hose may be squashed or kinked. (
)
The machine does not empty and/or
does not spin
The “Night Cycle” option has been selected.
E 2 0
The drain filter may be blocked. (
)
The drain hose extension, if fitted, is not correct. Follow the
instructions for connecting to the waste.
●
●
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum to
allow the machine to spin.
●
●
There is water on the floor
Too much detergent or unsuitable detergent has been used (creates too
much foam).
Check whether there are any leaks from the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if
it is damp.
●
●
●
●
●
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
The emergency emptying hose has not been plugged.
The drain hose has not been screwed fully in.
●
●
●
The door will not open
The water level is above the bottom edge of the door.
The machine is heating the water.
The drum is turning.
In any case, the door can only be opened when the relevant light has
gone out.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible causes
●
The machine vibrates when spinning
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not level and stable (check diagonally).
The washing load is badly distributed in the drum.
●
●
●
●
Maybe there is very little laundry in the drum.
●
The electronic unbalance detection device has cut in because the
Spinning starts late or the machine
does not spin
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 6 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and select the spin programme.
●
The machine makes an unusual
noise
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
●
No water is visible in the drum
Unsatisfactory washing results
Machines based on modern technology operate very economically
using very little water without affecting performance.
●
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
Stubborn stains have not been treated prior to washing
The correct wash programme/temperature has not been selected.
Too much laundry has been placed in the drum.
●
●
●
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:
Working”.
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
0870 5 929929
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture)
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
For the address of your local Service Force Centre and
further information about Service Force, please visit the
5. The purchase date.
Please note that a valid purchase receipt or
guarantee documentation is required for in-
guarantee service calls.
For Customer Service in Ireland please contact us at the
address below:
Zanussi Electrolux
Electrolux Group (Irl) Ltd
Long Mile Road
Mod. ..........
Prod. No. ...........
Ser. No. .........
Dublin 12
Republic of Ireland
Tel: +353 (0)1 4090751
Email: [email protected]
.
No. .........
..................... Ser
No.
Mod.
od.
Pr
P0042•N
To buy accessories, consumables and spare parts at
electrolux.co.uk
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Care Department Zanussi/Electrolux
Major Appliances
Addington Way, Luton
Bedfordshire LU4 9QQ
Tel 08705 727727*
Customer Care Department
For general enquiries concerning your Zanussi
Electrolux appliance or for further information on
Zanussi Electrolux products, please contact our
Customer Care Department by letter or telephone at the
* calls to this number may be recorded for training
purposes.
Guarantee Conditions
●
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
Standard guarantee conditions
We, Zanussi Electrolux, undertake that if, within 12
months of the date of the purchase, this ZANUSSI
ELECTROLUX appliance or any part thereof is proved
to be defective by reason only of faulty workmanship or
materials, we will, at our option repair or replace the
same FREE OF ANY CHARGE for labour, materials or
carriage on condition that:
●
Products of Zanussi Electrolux manufacture which
are NOT marketed by Zanussi Electrolux.
European guarantee
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
●
The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
The guarantee starts from the date you first
●
●
The appliance has been used for normal domestic
purposes only, and in accordance with the
manufacturer’s instructions.
purchased your product.
The guarantee is for the same period and to the same
●
extent for labour and parts as exists in the new
country of use for this brand or range of products.
●
The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
The guarantee relates to you and cannot be
●
transferred to another user.
●
All service work under this guarantee must be
undertaken by a Service Force Centre.
Your new home is within the European Community
●
(EC) or European Free Trade Area.
●
Any appliance or defective part replaced shall
become the Company’s property.
The product is installed and used in accordance with
●
our instructions and is only used domestically, i.e. a
normal household.
●
This guarantee is in addition to your statutory and
other legal rights.
The product is installed taking into account
●
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
regulations in your new country.
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
Exclusions
This guarantee does not cover:
France
Germany
Italy
Senlis
+33 (0) 344 62 29 29
+49 (0) 800 234 7378
+39 0434 39 4700
●
Damage or calls resulting from transportation,
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
Nurnberg
Pordenone
Stockholm
Luton
●
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
Sweden
UK
+46 (0) 8 672 53 90
+44 (0) 8705 727 727
+353 (0) 1 4090751
Ireland
Dublin
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Technical Specifications
DIMENSIONS
Height
Width
Depth
85 cm
60 cm
62 cm
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
230-240 V/50 Hz
2050 W (10A)
WATER PRESSURE
Minimum
Maximum
0.05 MPa (0.5 bar)
0.80 MPa (8. bar)
MAXIMUM RECOMMENDED LOAD
Cotton, linen
Synthetics
Delicate fabrics
7 kg
3 kg
3. kg
Wool
and Handwash
2. kg
SPIN SPEED
MaximumZ 16 S
1200 rpm (ZWN 1220 W)
1400 rpm (ZWN 1420 W - ZWN 1420G)
CONSUMPTION DATA FOR WASHING
7 KG NORMALLY SOILED COTTON
ITEMS AT 60°C + 40°AA option selected
Energy
Water
Time
1.19 kWh
56 litres
160 minutes
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Fill all the holes with the plastic plugs supplied with the
instruction booklet.
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using the spanner supplied with the appliance, unscrew
and remove the two rear bottom screws. Slide out the
two plastic pins.
P1128
P0002
Lay the machine gently on its back, making sure that the
hoses are not squashed.
Important !
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
In case of moving out the same precautions as per
paragraphe “The dangers of freezing” must be taken
i.e. the residual water in the hoses must be pumped out.
Positioning
P0001
P1129
Install the machine on a flat hard floor.
Remove the polystyrene block from the bottom of the
machine and release the two plastic bags.
Very carefully slide out the left polythene bag, removing
it towards the right and then downwards.
Make sure that air circulation around the machine is not
impeded by carpets, rugs etc. Check that the machine
does not touch the wall or other kitchen units.
Never place cardboard, wood or similar materials under
the machine to compensate for any unevenness in the
floor.
1
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible
with the plumbing of the existing installation, a variety
of connectors are available from good hardware stores
and plumbers merchants to suit most domestic
plumbing. Any alteration to your existing plumbing
must be carried out by a competent person, or qualified
plumber.
2
3
P1124
P1126
Repeat the operation for the right polythene bag,
removing it towards the left and then upwards.
Installation on a Suspended Floor
Suspended wooden floors are particularly susceptible to
vibration. To help prevent vibration we recommend you
place a waterproof wood panel, at least 15 mm thick
under the appliance, secured to at least 2 floor beams
with screws. If possible install the appliance in one of
the corners of the room, where the floor is more stable.
P1127
Remove the polystyrene base.
Set the machine upright and unscrew the remaining rear
screw. Slide out the relevant pin.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Water inlet
Connect the hose to a tap with a 3/4” thread.
Do not use already employed hoses.
Always use the hose supplied with the appliance to
connect to the water supply.
“U” piece
supplied
P1199
Place the drain hose into your standpipe, which should
have an internal diameter of approximately 38mm thus
ensuring there is an air break between the drain hose
and standpipe.
P1088
38 mm (11.2”)
standpipe
diameter
Installation should comply with local water authority
and building regulations’ requirements.
The appliance must be connected to a cold water
supply.
A minimum water pressure of 0.05 MPa (0.5 bar) is
required for safe operation of the appliance.
P1074
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
When discharging into a standpipe ensure that the top of
the standpipe is no more than 90cm (35.4'') and no less
than 60cm (23.6'') above floor level.
There should be a minimum distance of 5.02m
(16.5 ft) between the appliance’s inlet and the bottom of
the water storage tank.
3 pin
Set the hose correctly by loosening the ring nut. After
positioning the inlet hose, be sure to tighten the ring nut
again to prevent leaks.
P1039
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
P0021
If your drain hose looks like this (see below) you do not
require the “U” piece”. Just push the hose firmly into
the standpipe.
Water drainage
This appliance is designed to be permanently plumbed
into your home's drainage system using one of the
following methods.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
P1212
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Onto a sink outlet spigot.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
P1051
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
P1197
Some vibration is inevitable, especially if mounted on a
wooden floor.
Push the drain hose onto the spigot and secure with a
clip if required, ensure a loop is formed in the drain
hose (see diagram) to prevent waste from the sink
entering the washing machine.
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
Special conditions
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
Loop
P1198
Warning
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
The machine should NOT be placed on deep pile
carpeting.
Note
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
Important
Before connecting up the machine to new pipework or
to pipework that has not been used for some time, run
off a reasonable amount of water to flush out any debris
that may have collected in the pipes.
In the interest of the environment
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
Levelling
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable (check diagonally).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
If you require any further advice please contact your
local water authority.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
Brown
GREEN & YELLOW
E
SHOWER
SINK TOILET
BATH
BIDET
L
N
WASHING
MACHINE
BROWN
DISHWASHER
BLUE
RAINWATER
'RUN-OFF'
CORD CLAMP
P1041
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
TREATED
DISCHARGE
earth symbol
or coloured green and yellow.
RIVER
RIVER
The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
P0987
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING:
WARNING: THIS APPLIANCE MUST BE
EARTHED.
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely. Should the appliance power supply
cable neeed to be replaced, this must be carried
out by our Service Force Centre.
The manufacturer declines any liability should
this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
Note
When the appliance is installed the power supply cable
must be accessible.
Mod. ..........
Prod. No. ...........
Ser. No. .........
Permanent connection
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
.
No. .........
..................... Ser
No.
Mod.
od.
Pr
P0042•N
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
The switch must not break the yellow and green earth
cable at any point.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum
cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150
countries around the world.
© Electrolux plc 2005
Download from Www.Somanuals.com. All Manuals Search And Download.
|