EN
User manual
2
Washing machine
FCS 1020 C
Download from Www.Somanuals.com. All Manuals Search And Download.
• Always be sure, that there is no water leakage from
hoses and their connections after the installation.
• If the appliance is installed in a location subject tofrost,
please read the “dangers of freezing” chapter.
volatile cleaning fluids are used, care should be taken
to ensure that the fluid is removed from the garment
before placing in the machine.
• Never pull the power supply cable to remove the plug
from the socket; always take hold of the plug itself.
• Any plumbing work required to install this appliance
should be carried out by a qualified plumber or com- • Never use the appliance if the power supply cable, the
petent person.
control panel, the working surface or the base are
damaged so that the inside of the washing machine is
accessible.
• Any electrical work required to install this appliance
should be carried out by a qualified electrician or com-
petent person.
Child safety
Use
• This appliance is not intended for use by person (in-
cluding children) with reduced physical sensory or
mental capabilities or lack of experience and knowl-
edge unless they have been given supervision or in-
struction concerning use of the appliance by a person
responsible for their safety.
• Young children should be supervised to ensure that
they do not play with the appliance
• The packaging components (e.g. plastic film, poly-
styrene) can be dangerous to children - danger of suf-
focation! Keep them out of children’s reach.
• This appliance is designed for domestic use. It must
not be used for purposes other than those for which it
was designed.
• Only wash fabrics which are designed to be machine
washed. Follow the instructionsoneachgarmentlabel.
• Do not overload the appliance. See the Washing Pro-
gramme Table.
• Before washing, ensure that all pockets are empty and
buttons and zips are fastened. Avoid washing frayed or
torn articles and treat stains such as paint, ink, rust,
and grass before washing. Underwired bras must NOT
be machine washed.
• Keep all detergents in a safe place out of children’s
reach.
• Make sure that children or pets do not climb into the
drum.
• Garments which have been in contact with volatile pe-
troleum products should not be machine washed. If
Product description
Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and
detergent consumption. Its new washing system allows total use of detergent and reduces water consumption
so saving energy.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Machine front
Machine rear
2
3
1
2
1
3
4
4
1
2
3
4
Detergent dispenser drawer
Control panel
Door opening handle
Adjustable feet (front)
1
2
3
4
Transit locking devices
Drain hose
Electrical lead
Inlet hose
Detergent dispenser drawer
Compartment for powder or liquid detergent used for
main wash. If using liquid detergent pour it just before
starting the programme.
Compartment for liquid additives (fabric softener,
starch).
Any fabric softener or starching additives must be poured
into the compartment before starting the wash pro-
gramme.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel
1
2
3
4
5
6
7
8
9
Henceforth, the programme selector dial, the spin selector dial, programme progress lights and different buttons
will be indicated in all the book with the relevant numbers given in this table.
1.
Detergent drawer
• Detergent drawer has 2 separate compartments for detergent and fabric
conditioner.
Prewash detergent is to be added straight into the drum.
2.
3.
Option button
Extra Quick
Quick
• By means of this button, you can select only one of the options.
• The relevant light will light up.
Prewash button
• By means of this button, the machine performs a prewash cycle before
the main wash phase.
• The relevant light will light up.
4.
5.
6.
Economy button
• By means of this button, the machine performs an energy saving cycle.
• The relevant light will light up.
Super Rinse button
Start/Pause button
• By means of this button, the machine performs some additional rinses.
• The relevant light will light up.
• This button allows to start the selected programme; the corresponding
indicator light is lit.
• This button interrupts also a programme which is running, the corre-
sponding indicator light starts to flash.
7.
8.
Programme progress display • The different pilot lights illuminate depending on the running programme
phase.
Spin speed selector
• The spin speed selector dial allows for changing the spin speed. Turn the
spin selector, if you want your laundry to be spun at a speed different from
the one proposed by the appliance or select «Rinse Hold» or "No spin"
option.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
9.
Programme selector dial and • The programme selectordialallowsto select a programme and/ortoreset,
ON/OFF switch
cancel the programme, switch the machine on/off.
• Programme selector dial is divided into following sections: Cotton, Syn-
thetic, Delicate, Wool, Special programmes. It can be turned either clock-
wise or anticlockwise.
Table of Symbols
= Extra quick
= Quick
= Washing
= Rinses
= No Spin
= Drain
=Prewash
= Spin
= Cold wash
= Wool
= Economy
= Super Rinse
= Start/Pause
= Cycle End
= Door Locked
= Rinse Hold
= ON/OFF
be reduced. You can use this option if you want to wash
normally soiled laundry and at the same time save energy.
In order to be accounted as an energy class ”A” pro-
gramme, this button must also be pressed in the pro-
grammes ”Cotton 60 °C” and ”40 °C”. The main wash
will be extended with 20 minutes (60 °C) and 25 minutes
(40 °C).
Functions
Options (button 2)
Extra Quick
Very short programme for lightly soiled laundry, except
for wool. The washing time will be reduced approx. 30
minutes for cotton and by 20 minutes for synthetic. The
machine will perform 1 rinse less.
Super rinse (button 5)
Quick
The machine performs some additional rinses during the
washing cycle. This option is recommended for people
who are allergic to detergents, and in areas where the
water is very soft. Canbeusedwith all programmesexcept
for the wool programme.
Rinse hold or No spin (8)
Rinse hold
By selecting this option the water of the last rinse is not
emptied out to prevent the fabrics from creasing. When
the programme has finished, the lights "End" ( D ) and
"Locked" ( E ) are lit to indicate that the water must be
emptied out (See: " At the end of the programme").
No spin
By selecting this option all the spinning phases are ex-
cluded. To be used for extremely delicate material. The
machine will add some additional rinses to the cotton and
synthetic programmes.
Short programme for lightly soiled white-/coloured and
synthetic laundry. The washing time will be reduced ap-
prox. 10 minutes. Max. recommended temperature 60°C.
This options can not be chosen together with the
Eco option and neither with the wool programme.
The washing time will be reduced depending on the type
of material and the selected temperature. Recommended
load for cotton is 2 kg.
Prewash (button 3)
If the laundry is heavily soiled, you can choose a pro-
gramme with prewash. Before the main wash the machine
runs a prewash up to 30° C. The washing time will be
prolonged approx. 20 minutes. The prewash ends with a
short spin in the programmes for cotton and synthetic
laundry. In the programme for delicate laundry the water
is only drained. The prewash option is not available for
the wool programme.
Programme progress display (7)
Economy (button 4)
Only for cottons and synthetic items lightly or normally
soiled at a temperature of 40°C or higher. The washing
time will be prolonged and the washing temperature will
6
Download from Www.Somanuals.com. All Manuals Search And Download.
The light A illuminates when the machine is performing
the washing phase .
The light B illuminates when the machine is rinsing .
The light C illuminates when the machine is spinning .
The light D illuminates at the end of the washing cycle.
The light E indicates if the door can be opened:
• The light is lit: the door cannot be opened.
• The light is out: the door can be opened.
• The light is flashing: the door can soon be opened.
(A)
(B)
(C)
(D)
(E)
Before first use
Warning!
been left by the manufacturing process. Pour approx. 100
ml of detergent straight into the drum and run a cotton
cycle at 60°C. When the programme is finished the
machine will be ready to use.
Ensure that the electrical and water connections comply
with the installation instructions.
Important! Remove any material from the drum.
Important! We recommend you to run a wash programme
without any load, to clear any residues which may have
Daily use
Load the laundry
Measure out the detergent and the fabric softener
Open the door by carefully pulling the door handle out-
wards. Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
Pull out the dispenser
drawer until it stops.
Measureouttheamountof
detergent required, pour it
into the larger compart-
If required, pour fabric
softener into the smaller
compartment marked
(theamountusedmustnot
exceed the «MAX» mark
in the drawer). Close the
drawer gently.
ment on the left
.
Select the required programme by means of the
programme selector dial (9)
Turn the programme selector dial to the required pro-
gramme. The selector can be turned either clockwise or
anticlockwise.
The green light of button 6 starts to flash
7
Download from Www.Somanuals.com. All Manuals Search And Download.
On programme progress display the pilot lights corre-
sponding to all phases composing the selected pro-
gramme are lit.
On programme progress display the pilot lights A and E
illuminate to indicate that the appliance starts operating
and the door is locked.
On position
is switched OFF.
At the end of the programme the selector dial must be
turned to position to switch the machine off.
the programme is reset and the machine
Altering an option or a running programme
It is possible to change any option before the programme
carries it out.
Beforeyoumake anychange, youmustpausethewashing
machine by pressing the button 6 .
The programme can be changed as long as the button 6
has not been pressed. Changing a running programme is
possible only by resetting it. Turn the programme selector
dial to and then to the new programme position. Start
the new programme by pressing the button 6 again.
Important! If you turn the programme selector dial to
another programme when the machine is working, the
lights in the programme progress display will start to flash
to indicate a wrong selection. The machine will not
perform the new selected programme.
Select the spin speed, Rinse Hold or No spin option
(8)
Interrupting a programme
Press the button 6 to interrupt a programme which is
running, the corresponding light starts to flash. Press the
button again to restart the programme.
Select the spin speed, Rinse Hold option or No Spin op-
tion by turning the spin speed selector.
For the maximum spin speed allowed by each pro-
gramme, refer to the chapter Washing programmes .
• The position 1000 is equivalent to 900 rpm/min for the
synthetic and wool programmes and 700 rpm/min for
the delicate wash programme.
• The position 500 is equivalent to 500 rpm/min for all
the wash programmes.
Cancelling a programme
Turn the selector dial to
position to cancel a pro-
gramme which is running. Now you can select a new pro-
gramme.
Opening the door after the programme has started
First set the machine to pause by pressing the button 6 .
After some minutes, the door can be opened, when the
following conditions are observed:
Select the desired option by means of buttons 2, 3,
4 and 5
Depending on the programme, different functions can be
combined. These must be selected after choosing the de-
sired programme and before pressing the button 6. The
relevant light will illuminate.
• The water temperature is below 55°C.
• The water level is below the bottom edge of the door.
• The machine doesn’t spin.
If you cannot open the door but it is absolutely necessary
to open it you have to switch the machine off by turning
the selector dial to . After few minutes the door can be
opened
(Pay attention to the water level and temperature!).
After this procedure, it will be necessary to set the pro-
gramme and the options again and then press the button
6 .
At the end of the programme
The machine stops automatically.
If an incorrect option is selected, the corresponding in-
dicator lamp flashes for about 2 seconds. For the com-
patibility of the options with the washing programmes,
refer to the chapter «Washing programmes» .
The pilot light D illuminates to indicate that the pro-
gramme has finished. The pilot light E goes out, the door
can be opened and the laundry can be removed.
If at the end of a programme there is water in the tub (when
"Rinse hold" option has been selected), to empty out the
water follow the following instructions :
Start the programme by pressing button 6
To start the selected programme, press this button; the
corresponding pilot light stops flashing and remains lit.
•
turn the programme selector dial to
8
Download from Www.Somanuals.com. All Manuals Search And Download.
• select the «Drain» or «Spin» programme
• press button 6
When the pilot light E goes out, the door can be opened
and the laundry can be removed.
At the end of the cycle, turn the programme selector dial
Remove the laundry from the drum and carefully check
that the drum is empty. If you do not intend to carry out
another wash, close the water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
to
to switch the machine off.
Helpful hints and tips
General rules:
Sorting out the laundry
• Cotton, linen: drum full but not too tightly packed;
• Synthetics: drum no more than half full;
• Delicate fabrics and woollens: drum no more than one
third full.
Follow the wash code symbols on each garment label and
the manufacturer’s washing instructions. Sort the laundry
as follows: whites, coloureds, synthetics, delicates, wool-
lens.
Washing a maximum load makes the most efficient use
of water and energy.
Temperatures
For heavily soiled laundry, reduce the load size.
for normally soiled white cottons
95° or 90°
60°/50°
and linen (e.g. tea cloths, towels, ta-
blecloths, sheets...)
Laundry weights
The following weights are indicative:
for normally soiled, colour fast gar-
ments (e.g. shirts, night dresses,
pyjamas....) in linen, cotton or syn-
thetic fibres and for lightly soiled
white cotton (e.g. underwear)
The following weights are indicative:
bathrobe
1200 g
700 g
600 g
500 g
250 g
200 g
quilt cover
man’s work shirt
sheet, man’s pyjamas
tablecloth
for delicate items (e.g. net curtains),
mixed laundry including synthetic
40°-30°- Cold fibres and woollens bearing the la-
bel «pure new wool, machine wash-
able, non-shrink»
pillow case, towelling towel, night
dress, man’s shirt
Before loading the laundry
Never wash whites and coloureds together. Whites may
lose their «whiteness» in the wash.
tea cloth, ladies’ briefs, napkin,
blouse, men’s underpants
100 g
New coloured items may run in the first wash; they should
therefore be washed separately the first time.
Make sure that no metal objects are left in the laundry
(e.g. hair clips, safety pins, pins).
Button up pillowcases, close zip fasteners, hooks and
poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or tie them
up in a bag or net.
Removing stains
Stubborn stains may not be removed by just water and
detergent. It is therefore advisable to treat them prior to
washing.
Blood: treat fresh stains with cold water. For dried stains,
soak overnight in water with a special detergent then rub
in the soap and water.
Oil based paint: moisten with benzine stain remover, lay
the garment on a soft cloth and dab the stain; treat several
times.
Dried grease stains: moisten with turpentine, lay the gar-
ment on a soft surface and dab the stain with the fingertips
and a cotton cloth.
Maximum loads
Recommended loads are indicated in the washing pro-
gramme charts.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rust: oxalic acid dissolved in hot water or a rust removing The detergent and any additives must be placed in the
product used cold. Be careful with rust stains which are appropriate compartments of the dispenser drawer before
not recent since the cellulose structure will already have starting the wash programme.
been damaged and the fabric tends to hole.
Prewash detergent is to be added straight into the
drum
Mould stains: treat with bleach, rinse well (whites and fast
coloureds only).
Grass: soap lightly and treat with bleach (whites and fast
coloureds only).
Ball point pen and glue: moisten with acetone , lay the
garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains
with methylated spirits. Treat any residual marks with
bleach.
Red wine: soak in water and detergent, rinse and treat with
acetic or citric acid, then rinse. Treat any residual marks
with bleach.
If using liquid detergents, a programme without prewash
must be selected. Pour the liquid detergent into the de-
tergent compartment immediately before you start the
programme.
Your appliance incorporates a recirculation system which
allows an optimal use of the concentrated detergent.
Follow the product manufacturer’s recommendations on
quantities to use and do not exceed the «MAX» mark in
the detergent dispenser drawer .
1)
Degrees of water hardness
Ink: depending on the type of ink, moisten the fabric first
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in your
area can be obtained from the relevant water supply com-
pany, or from your local authority.
1)
with acetone , then with acetic acid; treat any residual
marks on white fabrics with bleach and then rinse thor-
oughly.
Tar stains: first treat with stain remover, methylated spirits
or benzine, then rub with detergent paste.
A water softener must be added when water has a
medium-high degree of hardness (from degree of
hardness II). Follow the manufacturer’s instructions. The
quantity of detergent can then always be adjusted to de-
gree of hardness I (= soft).
Detergents and additives
Good washing results also depend on the choice of de-
tergent and use of the correct quantities to avoid waste
and protect the environment.
Although biodegradable, detergents contain substances
which, in large quantities, can upset the delicate balance
of nature.
The choice of detergent will depend on the type of fabric
(delicates, woollens, cottons, etc.), the colour, washing
temperature and degree of soiling.
All commonly available washing machine detergents may
be used in this appliance:
• powder detergents for all types of fabric
Degrees of water hardness
Character-
Level
German
°dH
French
°T.H.
istic
1
2
3
4
soft
medium
hard
0-7
8-14
15-21
> 21
0-15
16-25
26-37
> 37
very hard
• powder detergents for delicate fabrics (60°C max) and
woollens
• liquid detergents, preferably for low temperature wash
programmes (60°C max) for all types of fabric, or spe-
cial for woollens only.
1) do not use acetone on artificial silk
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Description of the pro-
gramme
Programme/ Temperature
Type of laundry
Options
SPIN REDUCTION/NO
SPIN/RINSE HOLD
EXTRA QUICK/QUICK
PREWASH
ECONOMY
SUPER RINSE
Main wash
Rinses
Long spin max. 1000 rpm
Max load 3 kg
1)
1)
1)
COTTON
90°
White cotton (heavily
soiled cotton items)
SPIN REDUCTION/NO
SPIN/RINSE HOLD
EXTRA QUICK/QUICK
PREWASH
ECONOMY
SUPER RINSE
Main wash
Rinses
Long spin max. 1000 rpm
Max load 3 kg
COTTON
60° - COLD
Coloured cotton (normally
soiled cotton items)
SPIN REDUCTION/NO
SPIN/RINSE HOLD
EXTRA QUICK/QUICK
PREWASH
Synthetic or mixed fab-
rics: underwear, coloured
garments, non-shrink
shirts, blouses.
Main wash
Rinses
Short spin max. 900 rpm
Max Load 1,5 kg
SYNTHETIC
60°-30°
ECONOMY
SUPER RINSE
SPIN REDUCTION/NO
SPIN/RINSE HOLD
QUICK
PREWASH
SUPER RINSE
Main wash
Rinses
Short spin max. 700 rpm
Max Load 1,5 kg
DELICATE
40°-30°
Delicate fabrics: acrylics,
viscose, polyester.
1)
Washing programme for
machine washable wool as
well as for hand washable
woollens and delicate fab-
rics.
Main wash
Rinses
Short spin max. 900 rpm
Max Load 1 kg
SPIN REDUCTION/NO
SPIN/RINSE HOLD
WOOL
30°-COLD
With this programme it is
possible to rinse and spin
cotton garments which
have beenwashedbyhand.
The machine performs 3
rinses, followed by a final
long spin. The spin speed
can be reduced.
SPIN REDUCTION/NO
SPIN/RINSE HOLD
SUPER RINSE
Rinses
Spin max. 1000 rpm
Max Load 3 kg
RINSES
DRAIN
For emptying out the water
of the last rinse in pro-
grammes with the Rinse
Hold option selected.
Draining of water
Max Load 3 kg
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the pro-
gramme
Programme/ Temperature
Type of laundry
Options
Separate spin for hand
washed garments and after
programmeswiththeRinse
Hold option selected. You
can choose the spin speed
by turning the spin speed
selector to adapt it to the
fabrics to be spun.
Drain and long spin
Max. spin speed 1000 rpm
Max Load 3 kg
SPIN REDUCTION
SPIN
For resetting the pro-
gramme or switching the
machine off
/ OFF
1) If you select this option, we recommend that you reduce the maximum load. Recommended load for cotton is 2 kg.
Care and cleaning
Important! You must DISCONNECT the appliance from
the electricity supply, before you can carry out any
cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good idea
to periodically use a water softening powder in the ma-
chine. Do this separately from any laundry washing, and
according to the softening powder manufacturer's in-
If necessary, the whole de- To remove the siphon at
structions. This will help to prevent the formation of lime
tergent drawer can be tak- the inside edge of the
deposits.
en out of the machine for drawer for cleaning, you
Maintenance Wash
cleaning. You need to pull need to press it inwards
it firmly outwards, so that and pull it upwards at the
it comes free of retaining same time. Flush it out un-
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash programme.
• Use a normal measure of detergent, must be a powder
with biological properties.
stop.
der a tap, to remove any
traces of accumulated
powder. When you put it
back, press it downwards
until you hear a distinct
click.
External cleaning
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the drawer recess
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
• Turn off the water supply.
• Unscrew the inlet hose from the supply tap.
• Select a wash programme, start the machine and let
the programme run for a short time.
Having removed the draw-
er, use a small brush to
clean the recess, ensuring
that all washing powder
residue is removed from
the upper and lower part of
the recess.
• Interrupt the programme by turning the programme
selector to
position.
Replace the drawer and run the rinse programme with-
out any clothes in the drum.
• Place the end of inlet and drain hoses down low, into
the waste gully (floor drain) set into the floor. Make
sure that the end of the hose does not go below the
water level in the gully's (drain's) water tap.
Cleaning the water inlet filter
Ifyourwaterisveryhardorcontainstracesoflimedeposit, • Select the programme "Drain" and let it run until it is
the water inlet filter may become clogged. It is therefore
a good idea to clean it from time to time.
finished.
•
Turn the programme selector to
position. When
you intend to start the machine up again, make sure
that the room temperature is above 0 °C.
The appliance is only to be used and stored indoors at
normal room temperature. The manufacturer is not re-
sponsible for any frost damage.
Turn off the water tap. Un-
screw the water inlet hose.
Clean the filter using a
hard bristle brush. Tighten
up the inlet hose.
What to do if…
Certain problems are due to lack of simple maintenance
or oversights, which can be solved easily without calling
out an engineer. Before contacting your local Service
Centre, please carry out the checks listed below.
During machine operation it is possible that the End pilot
light blinks to indicate that the machine is not working:
• 2 flashes: problem with the water draining.
• 4 flashes: door open.
Once the problem has been eliminated, press the button
START to restart the programme. If after all checks, the
problem persists, contact your local Service Centre.
• 1 flash: problem with the water supply.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible cause/Solution
The door has not been closed.
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
The machine does not start:
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the button Start has not been
pressed.
• Please turn the selector dial and press the button Start again.
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose is blocked.
The machine does not fill:
• Clean the water inlet hose filter.
The door is not properly closed.
• Close the door firmly.
The end of the drain hose is too low.
• Refer to relevant paragraph in «Installation» chapter.
The machine fills then empties im-
mediately:
The drain hose is squashed or kinked.
• Check the drain hose connection.
An option or a programme that ends with the water still in the tub or that
eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
The machine does not empty and/or
does not spin:
• Redistribute the laundry.
Too much detergent or unsuitable detergent (creates too much foam) has been
used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if it is
damp.
There is water on the floor:
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Change it with a new one.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible cause/Solution
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
Unsatisfactory washing results:
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the indicator light for door locked has gone out.
There is water in the drum.
The door will not open:
• Select drain or spin programme to empty out the water.
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
The machine vibrates is noisy:
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
The electronic unbalance detection device has cut in because the laundry is
not evenly distributed in the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several times before the unbalance
disappears and normal spinning can resume. If, after 10 minutes, the laundry
is still not evenly distributed in the drum, the machine will not spin. In this
case ,redistribute the load manually and select the spin programme.
Spinning starts late or the machine
does not spin:
• Redistribute the laundry.
The load is too small.
• Add moreitems, redistribute the load manually and then selectthe spinning
programme.
Machines based on modern technology operate very economically using very
little water without affecting performance.
No water is visible in the drum:
If you are unable to identify or solve the problem, contact
our service centre. Before telephoning, make a note of the
model, serial number and purchase date of your machine:
the Service Centre will require this information.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
Technical data
Dimensions
Width
Height
Depth
67 cm
49,5 cm
51,5 cm
Electrical connection
Voltage - Overall power - Fuse
Information on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
Water supply pressure
Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load
Spin Speed
Cotton
3 kg
Maximum
1000 rpm
Consumption values
Programme
Energy consumption
(KWh)
Water consumption (litres) Programme duration (Mi-
nutes)
White Cottons 90°
Cottons 60°
1.43
0.78
0.57
44
44
39
~ 126
~ 107
~ 130
Cotton + ECO option 60°
1)
Synthetic 60°
Synthetic 40°
Delicate 40°
Wool 30°
Rinses
0.57
0.26
0.38
0.20
0.03
-
42
42
45
45
27
-
~ 82
~ 67
~ 61
~ 45
~ 26
~ 1
Drain
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme
Energy consumption
(KWh)
Water consumption (litres) Programme duration (Mi-
nutes)
Spin
-
-
~ 5
1) «Cottons + Eco option» at 60°C with a load of 3 kg is the reference programme for the data entered in the energy label, in compliance
with EEC 92/75 standards.
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on
the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
Installation
Lifting the machine
Be careful when lifting the machine. Incorrect methods of
lifting can cause physical injuries and also increase the
risk of damage to the machine. Open the door and take
hold of the top inside of the door opening. You can also
lift the machine by gripping the rear overhang of the top.
Spread some of the poly- Remove the polystyrene
styrene packaging materi- base and the plastic sup-
als on the floor behind the port bar which the ma-
machine and then lay the chine rests on.
machine carefully rear
side down on them. Make
sure that no hoses are
Warning! Never lift the machine by gripping it’s
crushed in the process.
control panel, door, or detergent dispenser.
Unpacking
When supplied the washing machine is packed using a
number of locking devices/packing pieces to prevent
drum and motor from damage in transit All transit bolts
and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they
can be refitted if the machine ever has to be transported
Return machine to it's upright position and remove the
again.
powersupplycableandthedrainingandinlethosefrom
the hose holders on the rear of the appliance.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
some time, run off a reasonable amount of water to flush
out any debris that may have collected
Caution! Do not use the hose from your previous
appliance to connect to water supply.
Connect the hose to a tap
with a 3/4” thread. Always
use the hose supplied with
the appliance.
With a suitable spanner unscrew and remove the three
screws and their spacers on machine's rear.
The three holes must then
be pluggedwith the plastic
plug caps supplied in the
bag containing the in-
struction booklet, which
can be found inside the
drum.
The machine end of the in-
let hose can be turned in
any direction. Set the hose
correctly by loosening the
ring nut. After positioning
the inlet hose, be sure to
tighten the ring nut again
to prevent leaks.
Positioning
Install the machine on a flat hard floor. Make sure that air
circulation around the machine is not impeded bycarpets,
rugs etc. Check that the machine does not touch the wall
or furniture. Level the washing machine by raising or
lowering the two front feet. If necessary, check the setting
with a spirit level. Any necessary adjustment can be made
with a spanner. Accurate levelling prevents vibration,
noise and displacement of the machine during operation.
The inlet hose must not be lengthened. If it is too short
and you do not wish to move the tap, you will have to
purchase a new, longer hose specially designed for this
type of use.
Water drainage
The end of the drain hose can be positioned in three ways:
Hooked over the edge of a sink using the plastic hose
guide supplied with the machine.
Caution! Never place cardboard, wood or similar
materials under the machine to compensate for any
unevenness in the floor.
In this case, make sure the end cannot come unhooked
when the machine is emptying. This could be done by
tying it to the tap with a piece of string or attaching it to
the wall.
Water inlet
Warning! This appliance must be connected to a
cold water supply
Caution! Before connecting up the appliance to new
pipework or to pipework that has not been used for
In a sink drain pipe with a trap.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
The hose must not be stickedinto the standpipe more than
50 mm and it has to be fixed in this position. The drain
hose must not be kinked.
The drain hose can be extended up to total 3,5 m. For the
extension piece use a hose with an internal diameter at
least as large as that of the machine's own hose. Use a
suitable hose connector.
650-800 mm
The drain hose can be connected directly into the pipe
(e.g. beneath a washtub or sink), above the water trap. The
drain hose must be arranged so that some part of it’s
length is routed up to a level corresponding to the top
edge of the tub and fixed in place there.
Information on the electrical connection is given on the
rating plate on the inner edge of the appliance door.
Check that your domestic electrical installation can take
the maximum load required, also taking into account any
other appliances in use.
Directly into a drain pipe at a height of not less than 65
cm and not more than 80 cm.
Their must be an air gap around and below the end of
drain hose. This means that the internal diameter of the
standpipe must be larger than the outer diameter of the
hose.
Caution! Connect the machine to an earthed socket.
Caution! The manufacturer does not accept any
responsibility for damage or injury through failure
to comply with the above safety precaution.
Caution! The power supply cable must be easily
accessible after installing the machine.
40 mm
650-800 mm
Caution! Should the appliance power supply cable
need to be replaced, this must be carried out by a
Service Centre.
Environment concerns
waste handling of this product. For more detailed
information about recycling of this product, please
contactyourlocalcouncil,yourhouseholdwastedisposal
service or the shop where you purchased the product.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
Packaging materials
The materials marked with the symbol
>PE<=polyethylene
>PS<=polystyrene
are recyclable.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
>PP<=polypropylene
This meansthatthey can be recycled by disposingofthem
properly in appropriate collection containers.
• The machine works more economically if it is fully
loaded.
• Withadequatepre-treatment, stainsandlimitedsoiling
can be removed; the laundry can then be washed at a
lower temperature.
• Measure out detergent according to the water hard-
ness, the degree of soiling and the quantity of laundry
being washed.
Ecological hints
To save water, energyandto helpprotecttheenvironment,
we recommend that you follow these tips:
• Normally soiled laundry may be washed without pre-
washing in order to save detergent, water and time (the
environment is protected too!).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|