User
Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Features ........................................................... 1.2
Understanding Component Locations ............................... 1.5
Front View .............................................................. 1.5
Unpacking .................................................................... 2.2
Selecting a Location ................................................. 2.4
Installing the Toner Cartridge ......................................... 2.5
For Network Printing (WorkCentre PE120i only) ......... 2.14
Turning the Machine On ............................................... 2.14
Scan Lamp Save Mode ........................................... 2.26
Installing Xerox drivers in Windows ............................... 2.29
Installing Xerox Drivers in Microsoft Windows XP
2000 or Windows 98/ME using the Parallel port ......... 2.31
Installing Xerox Drivers in Microsoft Windows 98
or Windows Millennium using the USB port ............... 2.32
Printer Driver Features ........................................... 2.36
Using ControlCentre .................................................... 2.37
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Bypass Tray .................................................. 3.6
Using the Manual Feed Mode ..................................... 3.8
Using Help ............................................................ 4.14
Deleting a Watermark ............................................ 4.22
About Sharing the Machine on a Network ....................... 4.23
In Windows NT 4.0/2000/XP ................................... 4.25
Preparing a Document ................................................... 5.3
Setting Copy Options ..................................................... 5.7
Darkness ................................................................ 5.7
Original Type .......................................................... 5.7
Reduced/Enlarged Copy ........................................... 5.8
Number of Copies .................................................... 5.9
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Sides on 1 Page Copying ...................................... 5.11
2 Up or 4 Up Copying ............................................. 5.12
Changing the Default Settings ...................................... 5.14
Scanning Basics ............................................................ 6.2
Scanning Using the WIA Driver ....................................... 6.4
Storing a Number for Speed Dialing ......................... 7.21
Sending a Fax Using Group Dialing
(Multi-address Transmission) .................................. 7.25
Searching for a Number in Memory ............................... 7.26
Searching Sequentially through the Memory .............. 7.26
Searching with a Particular First Letter ..................... 7.26
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Secure Receiving Mode ....................................... 7.35
Printing Reports .......................................................... 7.36
Advanced Fax Setting Options ................................. 7.39
Replacing the Toner Cartridge ................................... 8.8
Setting the Notify Toner Option ............................... 8.10
Consumables and Replacement Parts ............................. 8.12
Copying Problems .................................................. 9.26
Common Linux Problems ........................................ 9.30
Troubleshooting PS Errors
(WorkCentre PE120i Only) ...................................... 9.33
Common Macintosh Problems
(WorkCentre PE120i Only) ...................................... 9.34
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting an Image File ........................................... 10.7
Formatting the USB Flash Drive ............................... 10.8
Printing From the USB Flash Drive ................................ 10.10
Printing a Document .................................................... A.12
Printing from Applications ....................................... A.12
Scanning a Document .................................................. A.14
Using the Image Editor .......................................... A.17
Installing PostScript Drivers ........................................... B.2
Installing PostScript Drivers ...................................... B.2
Using PostScript Printer Driver Features ........................... B.4
Accessing Printer Properties ...................................... B.4
Printer Settings ....................................................... B.5
Installing Software for Macintosh .................................... C.2
Setting Up the Machine .................................................. C.4
For a Network-connected Macintosh ........................... C.4
For a USB-connected Macintosh ................................. C.5
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a Document ...................................................... C.6
Canceling a Print Job ................................................ C.7
Scheduling a Print Job .............................................. C.8
Installing Memory DIMM ................................................ D.2
Setting Tray 2 in the Printer Properties ....................... D.8
Supported Sizes of Paper .......................................... E.6
Guidelines for Using Paper ........................................ E.7
Paper Specifications ................................................. E.8
Paper Output Capacity ............................................. E.8
Paper Storage Environment ...................................... E.8
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions and Safety Information
Safety
Your Xerox product and supplies have been designed and tested to meet strict safety
requirements. These include Safety Agency approval, and compliance to established
environmental standards. Please read the following instructions carefully before
operating the product and refer to them as needed to ensure the continued safe
operation of your product.
The safety testing and performance of this product have been verified using
XEROX materials only.
Follow all warnings and instructions marked on, or supplied with the product.
This WARNING Mark alerts users to the possibility of personal injury.
This WARNING Mark alerts users to heated surfaces.
WARNING: This product must be connected to a protective earthing circuit.
This product is equipped with a 3-wire type plug, provided with a protective earthing
pin. This plug will fit only into an earthed power outlet. This is a safety feature. To
avoid risk of electric shock, contact your electrician to replace the receptacle if you
are unable to insert the plug into the outlet. Never use an earthed adapter plug to
connect the product to a power source receptacle that lacks an earth connection
terminal.
This product should be operated from the type of power source indicated on the
marking label. If you are not sure of the type of power available, consult your local
power company.
Do not allow anything to rest on the power cord. Do not locate the product where
persons will step or trip on the cord.
Use of an extension cord with this product is not recommended or
authorized. Users should check building codes and insurance requirements if a
properly earthed extension cord is to be used. Ensure that the total ampere ratings
of the products plugged into the extension cord do not exceed the extension cord
ampere rating. Also, make sure that the total amperage of all products plugged into
the wall outlets does not exceed the outlet rating.
Disconnect Device for this product is the power cord. To remove all electrical power
to the product, disconnect the power cord from the power receptacle.
Your equipment is equipped with an energy saving device to conserve power when
the machine is not in use. The machine may be left on continuously.
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Unplug this product from the wall outlet before cleaning. Always use materials
specifically designated for this product. Use of other materials may result in poor
performance and could create a hazardous situation.
Do not use aerosol cleaners. Follow the instructions in the User Guide for proper
cleaning methods.
Never use supplies or cleaning materials for purposes other than those for which
they were intended. Keep all supplies and materials out of reach of children.
Do not use this product near water, wet locations, or outdoors.
Do not place this product on an unstable cart, stand or table. The product may fall,
causing personal injury or serious damage to the product
Slots and Openings in the cabinet and in the back and sides of the product are
provided for ventilation. To ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or covered. The product
should never be located near or over a radiator or heat register. This product should
not be placed in a built-in installation unless proper ventilation is provided.
Never push objects of any kind into the slots of the product as they may touch
dangerous voltage points or short out parts which could result in a fire or electric
shock.
Never spill liquid of any kind on the product.
Never remove covers or guards that require a tool for removal, unless directed to do
so in a Xerox approved maintenance kit.
Never defeat interlock switches. Machines are designed to restrict operator access
to unsafe areas. Covers, guards and interlock switches are provided to ensure that
the machine will not operate with covers opened.
Do not put your hands into the fuser area, located just inside the exit tray area, as
you may be burned.
Quality Standards: The product is manufactured under a registered ISO9002
Quality system.
If you need additional safety information concerning this XEROX product or XEROX
supplied materials you may call the following number:
EUROPE +44 (0) 1707 353434
USA/CANADA 1 800 828 6571
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Laser Safety Statement
WARNING:Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
With specific regard to lasers, the equipment complies with laser product
performance standards set by governmental, national and international agencies as
a Class 1 Laser Product. It does not emit hazardous radiation as the beam is totally
enclosed during all phases of customer operation and maintenance.
Ozone Safety
During normal operation, this machine produces ozone. The
ozone produced does not present a hazard to the operator.
However, it is advisable that the machine be operated in a well
ventilated area.
If you need additional information about ozone, please request
your nearest Xerox dealer.
Power Saver
This machine contains advanced energy conservation
technology that reduces power consumption when it is not
in active use.
When the machine does not receive data for an extended
period of time, power consumption is automatically
lowered.
The energy star emblem does not represent EPA endorsement of any machine or
service.
The ENERGY STAR and ENERGY STAR MARK are registered United States trademarks.
Product Recycling and Disposal
Please recycle or dispose of the packaging material for this
product in an environmentally responsible manner.
Xerox operates a worldwide equipment takeback and
reuse/recycle program. Contact your Xerox sales
representative (1-800-ASK-XEROX) to determine whether
this Xerox product is part of the program. For more
information about Xerox environmental programs, visit
x
Download from Www.Somanuals.com. All Manuals Search And Download.
If you are managing the disposal of your Xerox product, please note that the product
contains Lead, and other materials whose disposal may be regulated due to
environmental considerations. The presence of Lead is fully consistent with global
regulations applicable at the time that the product was placed on the market. For
recycling and disposal information, contact your local authorities. In the United
States, you may also refer to the Electronic Industries Alliance web site:
Radio Frequency Emissions
FCC PART 15 Information to the User
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or experienced radio TV technician for help.
Caution: Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the equipment.
Canadian ICES-003 Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the interference-causing equipment standard
entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux
appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur:
“Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulations - Europe
Certification to 1999/5/EC Radio Equipment &
Telecommunications
Terminal Equipment Directive
This Xerox product has been self-certified by Xerox for pan-European single terminal
connection to the analogue public switched telephone network (PSTN) in accordance
with Directive 1999/5/EC.
The product has been designed to work with the national PSTNs and compatible PBXs
of the following countries:
Austria Germany Luxembourg Sweden
Belgium Greece Netherlands Switzerland
Denmark Iceland Norway United Kingdom
France Ireland Portugal Finland
Italy Spain Czech Republic Poland
Bulgaria Romania
In the event of problems, you should contact your local Xerox representative in the
first instance.
This product has been tested to and is compliant with TBR21, a technical specification
for terminal equipment for use on analogue-switched telephone networks in the
European Economic Area.
The product may be configured to be compatible with other country networks. Please
contact your Xerox representative if it needs to be reconnected to another country's
network.
NOTE: Although this product can use either loop disconnect (pulse) or DTMF (tone)
signaling it is recommended that it is set to use DTMF signaling. DTMF signaling provides
reliable and faster call setup.
Modification, connection to external control software or to external control apparatus
not authorized by Xerox, will invalidate its certification.
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulations - USA
Fax Send Header Requirements
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to
use a computer or other electronic device, including FAX machines, to send any
message unless such message clearly contains in a margin at the top or bottom of
each transmitted page or on the first page of the transmission, the date and time it
is sent and an identification of the business or other entity, or other individual sending
the message and the telephone number of the sending machine or such business,
other entity, or individual. (The telephone number provided may not be a 900 number
or any other number for which charges exceed local or long-distance transmission
charges.)
In order to program this information into your FAX machine refer to page
Data Coupler Information
This equipment complies with Part 68 of the FCC rules and the requirements adopted
by the Administrative Council for Terminal Attachments (ACTA). On the rear of this
equipment is a label that contains, among other information, a product identifier in
the format US:AAAEQ##TXXXX. If requested, this number must be provided to the
Telephone Company. A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular
jack that is also compliant.
WARNING:Ask your local Telephone Company for the modular jack type
installed on your line. Connecting this machine to an unauthorized jack can
damage Telephone Company equipment. You, not Xerox, assume all
responsibility and/or liability for any damage caused by the connection of
this machine to an unauthorized jack.
You may safely connect the machine to the following standard modular jack: USOC
RJ-11C using the compliant telephone line cord (with modular plugs) provided with
the installation kit. See installation instructions for details.
The Ringer Equivalence Number (or REN) is used to determine the number of devices
that may be connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most but not all
areas, the sum of RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the total RENs, contact
the local Telephone Company. The REN for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN
without a decimal point (e.g., 03 is a REN of 0.3).
If this Xerox equipment causes harm to the telephone network, the Telephone
Company will notify you in advance that temporary discontinuance of service may be
required. But if advance notice isn't practical, the Telephone Company will notify the
customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
The Telephone Company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the
Telephone Company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this Xerox equipment, for repair or warranty
information, please contact the appropriate service center; details of which are
displayed either on the machine or contained within the user guide. If the equipment
is causing harm to the telephone network, the Telephone Company may request that
you disconnect the equipment until the problem is resolved.
Repairs to the machine should be made only by a Xerox representative or an
authorized Xerox service agency. This applies at any time during or after the service
warranty period. If unauthorized repair is performed, the remainder of the warranty
period is null and void.
This equipment must not be used on party lines. Connection to party line service is
subject to state tariffs. Contact the state public utility commission, public service
commission or corporation commission for information.
If your office has specially wired alarm equipment connected to the telephone line,
ensure the installation of this Xerox equipment does not disable your alarm
equipment. If you have questions about what will disable alarm equipment, consult
your Telephone Company or a qualified installer.
Regulations - Canada
This product meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number (REN) is an indication of the maximum number of
devices allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement
that the sum of the RENs of all the devices does not exceed five.
The REN value may be found on the label located on the rear of the equipment.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made by
the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority or electrician, as appropriate.
xiv
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity (European Countries)
Approvals and Certifications
The CE marking applied to this product symbolizes Xerox Limited
Declaration of Conformity with the following applicable Directives of
the European Union as of the dates indicated:
January 1, 1995: Council Directive 73/23/EEC amended by Council Directive 93/68/
EEC, approximation of the laws of the member states related to low voltage
equipment.
January 1, 1996: Council Directive 89/336/EEC, approximation of the laws of the
member states related to electromagnetic compatibility.
March 9, 1999 Council Directive 99/5/EC, on radio equipment and
telecommunications terminal equipment and the mutual recognition of their
conformity.
A full declaration, defining the relevant directives and referenced standards can be
obtained from your Xerox representative or by contacting:
WARNING:In order to allow this equipment to operate in proximity to
Industrial, Scientific and Medical (ISM) equipment, the external radiation
from the ISM equipment may have limited or special mitigation measures
taken.
WARNING:Shielded cables must be used with this equipment to maintain
compliance with Council Directive 89/336/EEC.
xv
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
xvi
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Features
Your new machine is equipped with special features that
improve the print quality. You can:
Print with excellent quality and speed
• You can print up to 1200 dpi [Best]. See page 4.8.
• Your machine prints A4-sized paper at up to 20 ppm and
letter-sized paper at up to 22 ppm (pages per minute).
Handle paper flexibly
•
Bypass tray supports letterhead, envelopes, labels,
transparencies, custom-sized materials, postcards, and
heavy paper. The Bypass tray can support up to 50 sheets
of standard paper.
• The Standard 250-sheet input tray (Tray1) and optional
250-sheet input tray (Tray2) supports A4/letter-sized
paper.
Create professional documents
• Print Watermarks. You can customize your documents
with words, such as “Confidential.” See page 4.20.
• Print Posters. The text and pictures of each page of your
document are magnified and printed across the sheet of
paper and taped together to form a poster. See page 4.16.
Save time and money
• This machine automatically conserves electricity by
substantially reducing power consumption when not
printing.
• This machine meets Energy Star guidelines for energy
efficiency.
1.2
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Expand the machine capacity
1
• This machine has 32 MB of memory which can be
expanded to 160 MB.
• You can install an optional 250-sheet tray in your machine.
This tray reduces how often you have to add paper to the
machine.
• The WorkCentre PE120i comes with a built-in PostScript 3
Emulation*.
• A Network interface enables network printing. The
WorkCentre PE120i comes with a built-in network
interface, 10/100 Base TX.
* PostScript 3 Emulation
© Copyright 1995-2003, Zoran Corporation. All
rights reserved. Zoran, the Zoran logo, IPS/PS3
and OneImage are trademarks of zoran
Corporation.
* 136 PS3 fonts
Contains UFST and MicroType from Agfa Monotype Corporation.
Print in various environments
• You can print in Windows 98/Me/NT 4.0/2000/XP
.
• Your machine is compatible with various Linux
.
• Your machine is compatible with various Macintosh
(WorkCentre PE120i only).
• Your machine comes with both the USB and Parallel
interface. The Parallel interface is available depending on
your country.
• You can also use a Network interface. The WorkCentre
PE120i comes with a built-in network interface, 10/100
Base TX.
1.3
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Use a USB flash drive
If you have a USB flash drive, you can use it in various ways with
your machine.
• You can scan documents and save them on the USB flash
drive.
• You can directly print data stored on the USB flash drive.
• You can manage the USB flash drive.
• You can back up data and restore backup files to the
machine’s memory.
Machine Features
The table below lists a general overview of features supported
by your machine.
(S: Standard)
Features
IEEE 1284 Parallel
USB 2.0
PE120
PE120i
S
S
-
S
S
S
PostScript Emulation
Network Interface
(Ethernet 10/100 Base TX)
-
S
1.4
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Understanding Component
Locations
These are the main components of your machine:
Front View
Document Guides
Document Cover
Automatic
Document
Document Feeder
Input Tray
Document
Output Tray
USB Flash
Drive Port
Document Glass
Control Panel
(See page 1.7.)
Front Output Tray
(Face Down)
Front Door
Toner
Cartridge
Paper Output
Extension
Paper Level Indicator
Paper Tray
(Tray 1)
OptionalPaper
Tray (Tray 2)
Bypass Tray
The figure above shows an WorkCentre PE120i.
1.5
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View
Rear Door
Control
Board Cover
NetworkPort
(WorkCentre
PE120i Only)
Rear Output Slot
(Face Up)
Parallel
Connector
Power Switch
USB
Connector
AC Power Cord
Connector
Line Jack
EXT Jack
*
Tray 2 Cable Connector
The figure above shows an WorkCentre PE120i.
*
If your country has a different telephone connection system, this socket may be blocked.
1.6
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Functions
WorkCentre PE120/120i
1
Allows you to store frequently-dialed fax
numbers and dial them with the touch of a few
buttons.
1
Allows you to shift the one-touch buttons to
the numbers 21 through 40.
Allows you to access a list of your PC software
programs that an image can be scanned to.
You must create the scan list using the Xerox
software (ControlCentre) provided with this
machine.
Also allows you to scan and save documents in
a USB flash drive, and manage it when it is
inserted into the USB port of your machine.
See Chapter 10, Installing a USB Flash Drive.
2
S
C
A
N
Adjusts the density of the documents for the
current copy job.
Selects the document type for the current
copy job.
3
C
O
P
Y
Selects the number of copies.
Allows you to use special copy features, such
as Clone, Collation, Auto Fit, 2 Sides on 1
page, 2/4 Up (multiple pages on a sheet), and
Poster copying.
Makes a copy smaller or larger than the
original.
Displays the current status and prompts
during an operation.
4
5
Turns on when the toner cartridge is empty.
Uses to scroll through the available options for
the selected menu item.
1.7
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Confirms the selection on the display.
Enters Menu mode and scrolls through the
menus available.
Sends you back to the upper menu level.
5
6
Stops an operation at any time.
In Standby mode, clears/cancels the copy
options, such as the darkness, the document
type setting, the copy size, and the number of
copies.
Starts a job.
Dials a number or enters alphanumeric
characters.
Adjusts the resolution of the documents for
the current fax job.
Allows you to send a fax to multiple
destinations.
Allows you to store frequently-dialed fax
numbers as one or two-digit speed dial or
group dial numbers for automatic dialing and
edit the stored numbers. Also allows you to
print a Phonebook list.
7
F
A
X
In Standby mode, redials the last number or
in Edit mode, inserts a pause into a fax
number.
Engages the telephone line.
Allows you to directly print files stored on a
USB flash drive when it is inserted into the
USB port in the front of your machine.
8
Allows you to save on toner by using less
toner to print a document.
9
S
A
V
E
Allows you to save on call costs by sending a
fax at a preset toll-saving time. Using this
feature, you can take advantage of lower long
distance rates at night, for example.
1.8
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
2
This chapter includes:
Unpacking
Loading Paper
Setting the Machine ID
Setting the Time and Date
Setting Sounds
Using the Save Modes
• Installing Xerox Drivers
Installing Xerox drivers in Windows
Using ControlCentre
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your Machine
Unpacking
1
Remove the machine and all accessories from the packing
carton. Make sure that the machine has been packed with
the following items:
NOTES
:
• The appearance of the power cord and the telephone line cord
may differ depending on your country’s specifications.
• The CD-ROMs contains the Xerox printer driver, Scan drivers,
ControlCentre, the User’s Guide, and the Adobe Acrobat Reader
program.
• For the WorkCentre PE120i, the PS Driver CD-ROM is supplied
with your machine.
• You should use the telephone line cord which is supplied with
your machine. If you are replacing it with another vendor’s, it
should be AWG #26 or lower gauge.
• Power cord must be plugged into a grounded power socket.
2.2
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Remove the packing tape from the front, back, and sides of
the machine.
2
Tape
3
Gently pull the scan lock label until it comes away from the
machine. This will pull the scanner locking switch into the
FORWARD (Unlocked) position automatically.
Scan Lock Label
NOTE: When you are moving the
machine or do not intend to use it for a
long period of time, move the scanner
locking switch BACKWARD to the lock
position, as shown. To scan or copy a
document, the switch must be unlocked.
2.3
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Location
Select a level, stable place with adequate space for air
circulation. Allow extra space for opening doors and trays.
The area should be well-ventilated and away from direct sunlight
or sources of heat, cold, and humidity. Do not set the machine
close to the edge of your desk or table.
Clearance Space
• Front: 482.6 mm (enough space so that the paper tray
can be removed)
• Back: 100 mm (enough space for ventilation)
• Right: 100 mm
• Left: 100 mm (enough space for ventilation)
2.4
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Toner Cartridge
2
1
Open the front door.
2
Remove the starter toner cartridge from its bag. Gently
shake the cartridge 5 or 6 times to distribute the toner.
Thoroughly shaking the cartridge will assure maximum
copies per cartridge.
NOTE: If toner gets on your clothing, wipe it off with a dry cloth
and wash clothing in cold water. Hot water sets toner into fabric.
CAUTIONS:
• To prevent damage, do not expose the toner cartridge to light for
more than a few minutes. Cover it with a piece of paper, if left
exposed for more than a few minutes.
• Do not touch the green underside of the toner cartridge. Use the
handle on the cartridge to avoid touching this area.
2.5
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Hold the toner cartridge by the handle. Slowly insert the
cartridge into the opening in the machine. Tabs on the sides
of the cartridge and corresponding grooves within the
machine will guide the cartridge into the correct position
until it locks into place completely.
Groove
Tab
4
Close the front door. Make sure that the door is securely
closed.
NOTE: When printing text at 5% coverage, you can expect a toner
cartridge life of approximately 3,500 for the Standard-Capacity
Print Cartridge and 5,000 for the High-Capacity print Cartridge.
(3,500 pages for the toner cartridge that is shipped with the
machine.)
2.6
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Paper
2
The paper tray can hold a maximum of 250 sheets of 20 lb
(75 g/m2) plain paper.
To load a stack of Letter-sized paper:
1
Pull open the paper tray and remove it from the machine.
NOTE: If you want to load a different sized paper, you need to
adjust the paper guides. For details, see page 2.9.
2
Fan the edges of the paper stack to separate the pages.
Then tap the stack on a flat surface to even it up.
3
Insert the paper stack into the paper tray with the side to
be printed on facing down
.
2.7
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Pay attention to the paper limit mark on both inside walls of
the tray. Paper overloading may cause paper jams.
5
Insert and slide the paper tray back into the machine.
NOTE: After you load paper, you need to set up your machine for
the paper type and size you loaded. See page 2.21 for copying and
faxing, or page 4.6 for PC-printing. The settings made from the
printer driver override the settings on the control panel.
2.8
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Size of the Paper in the Paper Tray
To load longer sizes of paper, such as Legal-sized paper, you
need to adjust the paper guides to extend the paper tray.
2
1
After pressing and unlatching the guide lock, slide the paper
length guide out completely to extend the paper tray to its
full length.
2
After inserting paper into the tray, squeeze the length guide
and slide it until it lightly touches the end of the paper
stack.
For paper smaller than Letter size, adjust the front paper
length guide so that it lightly touches the paper stack.
2.9
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Squeeze the width guide, as shown and slide it to the stack
of paper until it lightly touches the side of the stack.
NOTES
:
• Do not push the paper width guide far enough to cause the
materials to warp.
• If you do not adjust the paper width guide, it may cause paper
jams.
2.10
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Telephone Line
2
Plug one end of the supplied telephone line cord into the LINE
jack on the machine and the other end into the wall jack.
To the wall jack
If you want to use your machine to receive both faxes and voice
calls, you will need to connect a telephone and/or answering
machine to your machine.
Plug your phone or answering machine cord into the EXT jack,
as shown below.
To a phone or answering
machine
2.11
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Printer Cable
For Local Printing
To print from your computer in a local environment, you need to
connect your machine to a computer with either a Universal
Serial Bus (USB) cable or a parallel cable.
NOTE: You only need to connect one of the cables mentioned
above. Do not use the parallel and the USB cables at the same
time.
Using a USB Cable
NOTE: If you are using a USB cable, you must be running
Windows 98/Me/2000/XP, or Machintosh with OS 10.1~10.3
(WorkCentre PE120i only).
1
2
Make sure that both the machine and the computer are
turned off.
Connect a USB cable to the USB connector on your
machine.
3
Connect the other end of the cable to the USB port on your
computer.
2.12
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Parallel Cable
NOTE: Connecting the machine to the parallel port of the
computer requires a certified parallel cable. You need to buy an
IEEE-1284 compliant parallel cable that is 3 m or less in length.
2
1
2
Make sure that both the machine and the computer are
turned off.
Connect the parallel cable to the parallel connector on your
machine.
Push the metal clips down to fit inside the notches on the
cable plug.
3
Connect the other end of the cable to the parallel interface
port on your computer, and tighten the screws.
2.13
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
For Network Printing (WorkCentre PE120i only)
You can attach your machine to a network using an Ethernet
cable (UTP cable with RJ.45 connector).
The WorkCentre PE120i has a built-in network interface card.
1
2
Make sure that both the machine and the computer are
turned off.
Plug one end of the Ethernet cable into the Ethernet
network port on your machine.
3
Plug the other end of the cable into a network LAN
connection.
NOTE: After connecting the machine, you need to configure the
network parameters on the control panel. See System
Administration Guide
.
Turning the Machine On
1
Plug one end of the supplied three-pronged electrical cord
into the AC socket on the machine and the other end into a
properly grounded AC outlet.
2.14
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press the power switch to turn the machine on. “Warming
Up Please Wait” appears on the display indicating that the
machine is now on.
2
To the AC wall jack
To view your display text in another language, see
page 2.16.
CAUTIONS
:
• The fuser area inside the rear door of your machine becomes
very hot when in use. Take care not to burn your fingers when
you access this area.
• Do not disassemble the machine with power on. If you do, you
may receive an electric shock.
2.15
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Machine
System
Changing the Display Language
To change the language that displays on the control panel,
follow these steps:
1
2
Press Menu until “Machine Setup” appears on the top line
of the display.
When “Language” appears on the bottom line of the display,
press Enter
.
The current setting appears on the bottom line of the
display.
3
Press the scroll button (
appears on the display.
W
or
X) until the language you want
4
5
Press Enter to save the selection.
To return to Standby mode, press Stop/Clear
.
Setting the Machine ID
In some countries, you are required by law to indicate your fax
number on any fax you send. The Machine ID, containing your
telephone number and name (or company name), will be printed
at the top of each page sent from your machine.
1
Press Menu until “Machine Setup” appears on the top line
of the display. The first available menu item, “Machine ID,”
displays on the bottom line.
2
Press Enter. The display asks you to enter the fax number.
2.16
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
If there is a number already set, the number appears.
Enter your fax number using the number keypad.
3
2
NOTE: If you make a mistake while entering numbers, press the
W
4
5
button to delete the last digit.
Press Enter when the number on the display is correct. The
display asks you to enter an ID.
Enter your name or the company name using the number
keypad.
You can enter alphanumeric characters using the number
button.
0
For details on how to use the number keypad to enter
alphanumeric characters, see “Entering Characters Using
the Number Keypad” on page 2.17.
If you want to enter the same letter or number in
succession (e.g. SS, AA, 777), enter one digit, move the
cursor by pressing the
X
button, and enter the next digit.
If you want to insert a space in the name, you can also use
the button to move the cursor to skip the position.
X
6
7
Press Enter when the name on the display is correct.
To return to Standby mode, press Stop/Clear
.
Entering Characters Using the Number
Keypad
As you perform various tasks, you need to enter names and
numbers. For example, when you set up your machine, you
enter your name (or your company’s name) and telephone
number. When you store one-, two-, or three-digit speed dial or
group dial numbers, you may also enter the corresponding
names.
To enter alphanumeric characters:
2.17
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
1
When you are prompted to enter a letter,
locate the button labeled with the character
you want. Press the button until the correct
letter appears on the display.
For example, to enter the letter
press , labeled with “MNO.”
O,
6
Each time you press
, and finally
M,
N,
O
6.
You can enter special characters, such as space, plus sign,
and etc.. For details, see “Keypad Letters and Numbers” on
page 2.19.
2
3
To enter additional letters, repeat step 1.
If the next letter is printed on the same button, move the
cursor by pressing the
X
button and then press the button
labeled with the letter you want. The cursor will move to the
right and the next letter will appear on the display.
You can enter a space by pressing
1
twice.
When you finish entering letters, press Enter
.
2.18
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Keypad Letters and Numbers
Key
1
Assigned numbers, letters, or characters
1
A
D
G
J
Space
2
2
3
4
5
6
7
8
9
0
B
E
C
F
I
2
3
4
5
H
K
N
Q
U
L
M
P
O
6
R
V
S
8
7
T
W
X
Y
Z
9
+
-
,
.
‘
/
*
#
&
0
Changing Numbers or Names
If you make a mistake while entering a number or name, press
the button to delete the last digit or character. Then enter the
W
correct number or character.
Inserting a Pause
With some telephone systems, you must dial an access code (9,
for example) and listen for a second dial tone. In such cases,
you must insert a pause in the telephone number. You can insert
a pause while you are setting up one-touch or speed dial
numbers.
To insert a pause, press Redial/Pause at the appropriate place
while entering the telephone number. A “
display at the corresponding location.
−” appears on the
2.19
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Time and Date
The current time and date are shown on the display when your
machine is on and ready to work. All of your faxes will have the
time and date printed on them.
NOTE: If power to the machine is cut off, you may need to reset
the correct time and date once the power has been restored.
1
2
3
Press Menu until “Machine Setup” appears on the top line
of the display.
Press the scroll button (
W
or
X) to display “Date & Time” on
the bottom line and press Enter
.
Enter the correct time and date using the number keypad.
Month
Day
Year
= 01 ~ 12
= 01 ~ 31
= requires four digits
= 01 ~ 12 (12-hour mode)
00 ~ 23 (24-hour mode)
= 00 ~ 59
Hour
Minute
NOTE: The date format may differ from country to country.
You can also use the scroll button (
W
or
X) to move the
cursor under the digit you want to correct and enter a new
number.
4
To select “AM” or “PM” for 12-hour format, press the
button or any number button.
or
pressing the
or
button immediately moves the cursor
to the indicator.
You can change the clock mode to 24-hour format (e.g.
01:00 PM as 13:00). For details, see page 2.21.
2.20
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press Enter when the time and date on the display is
correct.
When you enter a wrong number, the machine beeps and
does not proceed to the next step. If this happens, just
reenter the correct number.
2
Changing the Clock Mode
You can set your machine to display the current time using
either a 12-hour or 24-hour format.
1
2
Press Menu until “Machine Setup” appears on the top line
of the display.
Press the scroll button (
W
or
X) until you see “Clock Mode”
on the bottom line and press Enter
.
The clock mode currently set for the machine displays.
Press the scroll button ( or ) to select the other mode
3
4
W
X
and then press Enter to save the selection.
To return to Standby mode, press Stop/Clear
.
Setting the Paper Size and Type
After loading paper in the paper tray, the standard Tray1,
Bypass tray, or optional Tray2, you need to set the paper size
and type using the control panel buttons. These settings will
apply to copy and fax modes. For PC-printing, you need to select
the paper size and type in the application program you use on
your PC.
1
Press Menu.
The display shows “Paper Setting” on the top line of the
display.
2
Press the scroll button (
the bottom line and press Enter to access the menu item.
W
or
X) to display “Paper Size” on
The first item, “Tray Paper,” displays on the bottom line.
2.21
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
If the optional Tray 2 is installed, “Tray1 Size” displays on
the bottom line.
3
4
If ther is no optional Tray 2 installed, press Enter
.
If the optional second tray is installed, use the scroll button
(
W
or
X
.
) to select the paper tray you want to use and press
Enter
Use the scroll button (
size and press Enter
W
or
X) to select the correct paper
.
5
6
Press Exit.
Press the
X
button to scroll to “Paper Type” and press
Enter to access the menu item.
7
8
Use the scroll button (
are using and press Enter to save it.
W
or
X) to find the paper type you
To return to Standby mode, press Stop/Clear
.
Setting Sounds
You can control the following sounds:
• Speaker: You can turn on or off the sounds from the
telephone line through the speaker, such as the dial tone or a
fax tone. With this option set to “Comm.” the speaker is on
until the remote machine answers.
• Ringer: You can adjust the ringer volume.
• Key Sound: With this option set to “On” a key tone sounds
each time a key is pressed.
• Alarm Sound: You can turn the alarm sound on or off. With
this option set to “On” an alarm tone sounds when an
error occurs or fax communication ends.
• You can adjust the volume level using the Manual Dial
button.
2.22
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker, Ringer, Key Sound, and
Alarm Sound
1
2
Press Menu until “Sound/Volume” appears on the top line
of the display.
2
Press the scroll button (
W
or
X) to scroll through the
options. Press Enter when you see the desired sound
option.
3
Press the scroll button (
status or volume for the option you have selected.
W
or
X) to display the desired
You will see the selection on the bottom line of the display.
For the ringer volume, you can select “Off,” “Low,” “Med,”
and “High.” Setting “Off” means that the ringer does not
sound. The machine works normally even if the ringer is
turned off.
4
Press Enter to save the selection. The next sound option
appears.
5
6
If necessary, repeat steps 2 through 4.
To return to Standby mode, press Stop/Clear
.
Speaker Volume
1
2
Press Manual Dial. A dial tone sounds from the speaker.
Press the scroll button ( or ) until you hear the volume
W
X
you want. The display shows the current volume level.
3
Press Manual Dial to save the change and return to
Standby mode.
NOTE: You can adjust the speaker volume only when the
telephone line is connected.
2.23
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Dial Mode
You can select the type of the telephone dial system where your
machine is connected.
NOTE: The Dial Mode setting may be unavailable depending on
your country.
1
2
Press Menu until “Fax Setup” appears on the top line of the
display.
Press the scroll button (
W
or
X) until “Dial Mode” appears
on the bottom line of the display.
3
4
Press Enter.
Press the scroll button (
mode.
W
or
X) to select the desired dial
Select “Tone” if your machine is connected to a tone dial
line.
Select “Pulse” if your machine is connected to a pulse dial
line.
5
Press Enter to save the selection.
To return to Standby mode, press Stop/Clear
.
Using the Save Modes
Toner Save Mode
Toner Save mode allows your machine to use less toner on each
page. Activating this mode extends the life of the toner cartridge
beyond what one would experience in the normal mode, but it
reduces print quality.
To turn the toner save mode on or off, press Toner Save
.
• If the button backlight is on, the mode is active and the
machine uses less toner when printing a document.
• If the button backlight is off, the mode is deactivated and
the machine prints with the normal quantity of toner.
2.24
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: When PC-printing, you can also turn on or off the toner
save mode in printer properties. See page 4.8.
2
Toll Save Mode
Using the Toll Save button on the control panel, you can quickly
set your machine to send the document(s) stored in memory
during a preset time slot, when the call charge is lower. Toll Save
mode helps you to take advantage of lower long distance rates
at night, for example.
NOTE: The toll-saving time slot may vary depending on your
contract with your long distance phone company.
To turn the toll save mode on:
1
2
3
Press Toll Save. The button backlight turns on.
Press Enter when “Start Time” displays on the bottom line.
Enter the time and date when your machine starts sending
toll save faxes, using the number keypad.
To select “AM” or “PM” for 12-hour format, press the
button or any number button.
or
4
5
6
Press Enter when the start time and date on the display is
correct.
Press the scroll button (
press Enter
W
or
X) to display “End Time” and
.
Enter the time and date when the toll save transmission
ends, using the number keypad.
7
8
Press Enter to save the setting.
To return to Standby mode, press Stop/Clear
.
Once the toll save mode is activated, your machine stores into
memory all of the documents to be faxed and sends them at the
programed time.
2.25
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn the toll save mode off, press Toll Save again. The button
backlight turns off and the mode is deactivated.
NOTE: Once the toll-saving time is set, the Toll Save button
allows you only to enable or disable the toll save mode. To change
the time setting, use the Toll Save item in the Advanced Fax
menu. See page 7.38.
Power Save Mode
Power Save mode allows your machine to reduce power
consumption when it is not in actual use. You can turn this mode
on and select a length of time for which the machine waits after
a job is printed before it switches to a reduced power state.
1
2
3
Press Menu until “Machine Setup” appears on top line of
the display.
Press the scroll button (
on the bottom line. Press Enter
W
or
X
) until “Power Save” appears
.
Press the scroll button (
W
or
X) to display “On” on the
bottom line and press Enter
.
Selecting “Off” means that the power save mode is
deactivated.
4
Press the scroll button (
want appears.
W
or
X) until the time setting you
The available options are 5, 10, 15, 30, and 45 (minutes).
5
6
Press Enter to save the selection.
To return to Standby mode, press Stop/Clear
.
Scan Lamp Save Mode
Scan Lamp Save mode allows you to extend scan lamp life. The
scan lamp under the document glass automatically turns off
when it is not in actual use to reduce power consumption and
extend the life of the lamp. The lamp automatically wakes up
after some warm-up time when you start scanning.
2.26
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
You can set the length of time for which the scan lamp waits
after a scan job is completed before it switches to the power
save mode.
2
1
2
3
Press Menu until “Machine Setup” appears on top line of
the display.
Press the scroll button (
W
or
X) until “Scan PWR Save”
appears on the bottom line. Press Enter
.
Press the scroll button (
W
or
X) until the time setting you
want appears on the bottom line.
The available time options are 0.5, 1, 4, 8, and 12 (hours).
4
5
Press Enter to save the selection.
To return to Standby mode, press Stop/Clear
.
2.27
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Xerox Drivers
You must install the printer driver using the supplied Xerox
driver CD after you have set up your machine and connected it
to your computer.
Xerox Driver CD contains:
•
•
•
•
•
PCL Printer driver- Use this driver to take full advantage
of your printer's features. Use in the Windows
environment.
PC Scan- TWAIN and Windows Image Acquisition (WIA)
machine.
ControlCentre- This program is automatically installed when
program, see page 2.37.
Linux Printer Driver- You can print and scan in Linux using
in Linux, see page A.3
.
Macintosh Printer Driver- you can print in the Macintosh
environment. For more information about installing the
Print driver, see page C.2
.
Xerox Postscript Driver CD contains:
•
PS Printer driver- this driver provides postscript printing
functionality, see page B.2.
2.28
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Xerox drivers in Windows
2
System Requirements
Before you begin, ensure that your system meets the minimum
requirements.
Item
Requirements
Operating
system
Windows 98/Me/NT 4.0/2000/XP
Windows 98/Me/NT 4.0/
2000
Pentium II 400 or
higher
CPU
Pentium III 933 or
higher
Windows XP
Windows 98/Me/NT 4.0/
2000
64 MB
128 MB
300 MBr
1 GB
RAM
Windows XP
Windows 98/Me/NT 4.0/
2000
Free disk space
Windows XP
5.0 or higher
Internet
Explorer
Installing Xerox Drivers in Microsoft
Windows XP or Windows 2000 using the
USB port
1
Plug the USB cable into the PE120 and connect to your
Personal Computer (PC). Start your PC and turn on the
PE120.
2
Insert the Xerox Drivers CD into the CD-ROM drive.
2.29
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
The "Found New Hardware Wizard" will display. Confirm
that the radio button "Install the software automatically" is
chosen. Click Next
.
4
5
The Wizard will begin to install the scan driver for the
PE120.
When the "Completing the Found New Hardware Wizard"
screen displays click Finish. The scan driver for the PE120
is now loaded.
6
The "Found New Hardware Wizard" will display. Confirm
that the radio button "Install the software automatically" is
chosen. Click Next
.
7
8
The Wizard will begin to install the PCL Print driver for the
PE120.
The Hardware Wizard will search the CD-ROM drive for the
print driver and will display the following screen.
2.30
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
9
When the "Completing the Found New Hardware Wizard"
screen displays click Finish. The PCL print driver for the
PE120 is now loaded.
2
10From within Microsoft Windows click Start and then
Settings and then Printers and Faxes. Click on the
"Xerox WC PE120 series PCL6" printer object and then
select File and then Properties. When the screen appears
click Print Test Page. The PE120 will now print a test
page. If the PE120 does not print then click
Troubleshoot... and follow the instructions on screen.
11If you want the PE120 to be your default printer. From
within Microsoft Windows click Start and then Settings and
then Printers and Faxes. Click on the "Xerox WC PE120
series PCL6" printer object and then select File and Set as
Default Printer
.
Installing Xerox Drivers in Microsoft
Windows XP, 2000 or Windows 98/ME
using the Parallel port
1
Plug the Parallel cable into the PE120 and connect to your
Personal Computer (PC). Start your PC and turn on the
PE120.
2
Insert the Xerox Drivers CD into the CD-ROM drive. From
within Microsoft Windows click Start and then Run. Type E:
Xinstall.exe, replacing "E" with the letter of your CD-ROM
drive and click OK
.
2.31
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
When the language selection window appears, select the
appropriate language and then click Continue
.
4
Choose the components you want to install and then click
Continue
.
5
6
Click Continue
.
Click Finish. The driver installation is now complete.
Installing Xerox Drivers in Microsoft
Windows 98 or Windows Millennium using
the USB port
1
Plug the USB cable into the PE120 and connect to your
Personal Computer (PC). Start your PC and turn on the
PE120.
2.32
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
Insert the Xerox Drivers CD into the CD-ROM drive.
The "Add New Hardware Wizard" will display. Click Next
.
2
Confirm that the radio button "Search for the best driver for
your device" is chosen. Click Next
.
i) In Windows Millennium (ME) the add Hardware Wizard
will search and find the scan driver. Click Finish when this
process is complete. Windows ME will then display the "Add
New Hardware Wizard" for the print driver, Click Next. Click
Finish when this process is complete. The drivers are
installed and you can skip to step 9.
ii) In Windows 98 you must specify the location. Browse to
the CD-ROM drive and the "Usb" folder on the CD and click
OK. Click Next when prompted then Finish. The USB
composite driver is then loaded.
5
6
The "Add New Hardware Wizard" will display. Click Next to
install the USB hardware driver for the PE120.
You must specify the location. Browse to the CD-ROM drive
and the "Usb" folder on the CD and click OK. Click Next
when prompted then click Finish. The USB hardware driver
for the PE120 is now loaded.
7
8
The "Add New Hardware Wizard" will display. Click Next to
install the Scan driver for the PE120.
Again, You must specify the location. Browse to the CD-
ROM drive and the "Driver" folder on the CD. Then click the
scan directory and then the Win98me directory and click
OK. Click Next when prompted then click Finish. The scan
driver for the PE120 is now loaded.
2.33
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
9
From within Microsoft Windows click Start and then
Settings and then Printers. Double-click the Add Printer
icon.
10The Add Printer Wizard will begin. Click Next. Choose
"Local Printer" and click Next
.
11At the next screen click Have Disk, and browse to your CD-
ROM drive. Open the "driver" directory, then open the
"Print" directory, then open the "AddPrint" directory and
then choose "Win98x" directory and click OK
.
12The next screen will display the "Xerox WC PE120 series
PCL6" driver, click Next
.
2.34
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
13Click the port that the printer cable is attached to, in this
case USB and click Next
.
2
14You can type in a name for your new printer or accept the
default then click Next
.
15Choose "Yes" to print a test page and click Finish. The
PE120 driver will now be installed and a test page should
print.
2.35
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Driver Features
Your printer drivers support the following standard features:
• Paper source selection
• Paper size, orientation, and media type
• number of copies
The following table lists a general overview of features
supported by your printer drivers.
PostScript
PCL 6 Printer
(WorkCentre
Driver
PE120i only)
Feature
Win 98/Me/
2000/XP/NT4.0 2000/XP/NT4.0
Win 98/Me/
Linux
Toner Save
Y
Y
Y
Y
Y
Y
Y
Print quality option
Poster printing
N
N
Multiple pages per
sheet (N-up)
Y
Y
Y(2,4)
Fit to page printing
Scale printing
Y
Y
Y
Y
Y
Y
Different source
for first page
Y
Y
Y
N
N
Y
Y
N
N
Watermark
TrueType fonts
option
2.36
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Using ControlCentre
2
from your computer and set up print and scan system data
options. You can also configure the destination launches when
you use the Scan-to... button on the control panel (see
page 2.38), and update the firmware of the machine (see
page 2.40).
1
2
To install the Xerox Control Centre, insert the supplied
Xerox Drivers CD
.
From within Windows click Start and then Run. Type E:
Xinstall.exe, replacing "E" with the letter of your CD-ROM
drive.
3
4
When the language selection window appears, select the
appropriate language and then click Continue
.
Choose Control Centre (if not already selected) and then
click Continue
.
5
At the next screen accept your choice by clicking Continue
and then click Finish. Control Centre is now installed.
To open ControlCentre:
1
2
Start your Windows.
Click the Start button on your desktop computer.
2.37
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
From Programs, select Xerox WC PE120 Series and then
ControlCentre
.
The ControlCentre window opens.
4
The ControlCentre window provides the following tabs:
Scan Settings
,
Phonebook (only for the WorkCentre
PE120/120i), Printer, and Firmware Update
.
To exit, click the Exit button at the bottom of each tab.
For further details, click the Help button at the bottom of
each tab.
The Scan Settings Tab
Click the Scan Settings tab to configure the scan destination
list that appears on the control panel display when you press
Scan-to... on the control panel. Using the destination list, you
can select a software program that an image can be scanned to.
You can also configure the scan settings, such as the output type
and resolution.
Select the program
you want from the
Available Scan
Destinations and click
to add it to the
Front Panel
Destination List. To
delete the selected
program, click
.
Downloads the
settings made in the
ControlCentre to your
machine.
Click to restore the
default settings.
2.38
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
The Phonebook Tab
Click the Phonebook tab to create and edit Phonebook entries.
Reads the Phonebook
entries from the
machine to the
2
ControlCentre.
Downloads the
Phonebook entries
from the
ControlCentre to the
machine.
Phonebook entries
Allows you to edit
a selected
Phonebook entry
in a separate Edit
window.
Allows you to set up
group dial numbers.
See page 2.39.
Deletes a selected
Phonebook entry.
Deletes all Phonebook
entries.
When you click Group dial, the following window opens.
Enter a name for
the group.
Shows the
Phonebook entries
Shows the numbers
included in the group.
To remove a number,
select it and click
you can include in
the group. After
selecting a number,
click Add to move it
to the Included
Remove
.
numbers list.
Click to save the group dial number after adding
or removing numbers for the group.
2.39
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
The Printer Tab
Click the Printer tab to configure print system settings.
Allows you to select
the default
orientation of print
image on the page.
Allows you to set the
margin of print
materials.
Allows you to set the
PCL emulation
configuration.
Downloads the
settings made in the
ControlCentre to your
machine.
The Firmware Update Tab
Click the Firmware Update tab to update the firmware of your
machine. This feature should be used by an authorized
technician. Please consult with the purchase point.
2.40
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
PAPER HANDLING
3
print materials and loading them into your machine.
This chapter includes:
• Selecting Print Materials
• Loading Paper
• Selecting an Output Location
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Print Materials
You can print on a variety of print materials, such as plain paper,
envelopes, labels, transparencies, and etc.. Always use print
materials that meet the guidelines for use with this machine.
See “Paper Specifications” on page E.6. To get the best possible
print quality, use only high-quality copier-grade paper.
When you choose print materials, consider the following:
• Size: You can use any size paper that fits easily within the
paper adjusters of the paper tray.
• Weight: Your machine supports paper weights as follows:
- 16 ~ 24 lb (60 ~ 90 g/m2) bond for the standard paper tray
(Tray 1) and optional paper tray (Tray 2)
- 16 ~ 43 lb (60 ~ 163 g/m2) bond for the Bypass tray
• Brightness: Some papers are whiter than others and produce
sharper, more vibrant images.
how crisp the printing looks on the paper.
CAUTION: Using print materials that dose not conform to the
specifications listed on page E.4 may cause problems that may
require service. This service is not covered by the warranty or
service agreements.
Paper Type, Input Sources, and Capacities
Input Source/Capacity*
Paper Type
Optional
Tray 2
Tray 1
Bypass Tray
Plain paper
250
250
50
5
Envelopes
-
-
-
-
Labels**
5
Transparencies**
Card stock**
-
-
-
-
5
5
* Maximum capacity may differ depending on media weight, thickness, and
environmental conditions.
**If you experience excessive jamming, load one sheet at a time through the
Bypass tray.
3.2
Paper Handling
Download from Www.Somanuals.com. All Manuals Search And Download.
Guidelines for Paper and Special Materials
When selecting or loading paper, envelopes, or other special
material, keep these guidelines in mind:
• Always use paper and other materials that conform with the
specifications listed under “Paper Specifications” on page E.6.
• Attempting to print on damp, curled, wrinkled, or torn paper
can cause paper jams and poor print quality.
3
• Use only high quality copier grade paper for the best print
quality.
• Avoid paper with embossed lettering, perforations, or a
texture that is too smooth or too rough. Paper jams may
occur.
• Store paper in its ream wrapper until you are ready to use.
Place cartons on pallets or shelves, not on the floor. Do not
place heavy objects on top of the paper, whether it is
packaged or unpackaged. Keep it away from moisture, or
other conditions that can cause it to wrinkle or curl.
• Store unused materials at temperatures between 15 oC and
30 oC (59 oF to 86 oF). The relative humidity should be
between 10 % and 70 %.
• During storage, you should use a moisture-proof wrap, such
as a plastic container or bag, to prevent dust and moisture
from contaminating your paper.
• Load special paper types one sheet at a time through the
Bypass tray to avoid paper jams.
• Only use materials specifically recommended for use in laser
printers.
• To prevent special materials, such as transparencies and label
sheets from sticking together, remove them as they print out.
• For envelopes:
- Use only well-constructed envelopes with sharp and well
creased folds.
- Do not use envelopes with clasps and snaps.
- Do not use envelopes with windows, coated lining, self-
adhesive seals, or other synthetic materials.
- Do not use damaged or poorly made envelopes.
• For transparencies:
- Place them on a flat surface after removing them from the
machine.
- Do not leave them in the paper tray for long periods of time.
Dust and dirt may accumulate on them, resulting in spotty
printing.
Paper Handling 3.3
Download from Www.Somanuals.com. All Manuals Search And Download.
- To avoid smudging caused by fingerprints, handle them
carefully.
- To avoid fading, do not expose printed transparencies to
prolonged sunlight.
• For labels:
- Verify that their adhesive material can tolerate a fusing
temperature of 200 oC (392 o F) for 0.1 second.
- Make sure that there is no exposed adhesive material
between them. Exposed areas can cause labels to peel off
during printing, which can cause paper jams. Exposed
adhesive can also cause damage to machine components.
- Do not load a sheet of them through the machine more than
once. The adhesive backing is designed for one pass
through the machine.
- Do not use labels that are separating from the backing
sheet or are wrinkled, bubbled or otherwise damaged.
• Do not use Carbonless paper and Tracing paper. Use of
these types of paper could result in chemical smells and could
damage your machine.
Loading Paper
In the Standard Tray
Load the print material you use for the majority of your print
jobs in the standard tray.
plain paper.
You can purchase an optional paper tray (Tray 2) and attach it
below the standard tray to load an additional 250 sheets of
paper. See page D.6 for more information about installing the
optional Tray 2.
3.4
Paper Handling
Download from Www.Somanuals.com. All Manuals Search And Download.
The paper level indicator on the front of the paper tray shows
the amount of paper currently left in the tray. When the tray is
empty, the indicator of the bar is completely lowered.
3
Paper full
Paper empty
To load paper, pull open the paper tray and load paper with the
side to be printed on face down.
You can load letterhead paper with the design side face down.
The top edge of the sheet with the logo should be placed at the
front of the tray.
For details about loading paper in the paper tray, see “Loading
Paper” on page 2.7.
If you want to load a different sized paper, you need to adjust
the paper guides. For details, see page 2.9.
NOTES
:
• If you experience problems with paper feed, place one sheet at a
time in the Bypass tray.
• You can load up to 150 sheets of previously printed paper. The
printed side should be facing up with an uncurled edge at the
front. If you experience problems with paper feed, turn the paper
around. Note that the print quality is not guaranteed.
Paper Handling 3.5
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Bypass Tray
The Bypass tray can hold several sizes and types of print
material, such as transparencies, postcards, note cards, and
envelopes. It is useful for single page printing on letterhead or
colored paper. You can load approximately 50 sheets of plain
paper, 5 envelopes, 5 transparencies, 5 sheets of card stock, or
5 labels at a time.
To load print material in the Bypass tray:
1
Lower the Bypass tray and unfold the paper support
extension, as shown.
2
If you are using paper, flex or fan the edge of the paper
stack to separate the pages before loading.
For transparencies, hold them by the edges and avoid
touching the print side. Oils from your fingers can cause
print quality problems.
3.6
Paper Handling
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Load the print material with the side to be printed on
facing up
.
3
For envelopes, load them with the flap side down and with
the stamp area on the top left side.
NOTES
:
• If envelopes jam while printing, try reducing the number of
envelopes in the Bypass tray.
• If you want to print on previously printed paper from the Bypass
tray, the printed side should be facing down.
4
Squeeze the width guide and adjust it to the width of the
print material without bending it.
5
After loading paper, you need to set the paper type and size
for the Bypass tray. See page 2.21 for copying and faxing
or page 4.6 for PC-printing.
NOTE: The settings made from the printer driver override the
settings on the control panel.
Paper Handling 3.7
Download from Www.Somanuals.com. All Manuals Search And Download.
6
If you want the machine to stack the printed pages on the
rear output slot, open the rear door to use the rear output
slot.
CAUTION: Make sure to open the rear output slot when you print
on transparencies. If not, they may tear while exiting the machine.
7
After printing, fold away the paper support extension and
close the Bypass tray.
Using the Manual Feed Mode
You can manually load a sheet of print material in the Bypass
tray if you select Manual Feed in the Source option from the
Paper tab when you change print settings to print a document.
For details about changing print settings, see page 4.6.
Manually loading paper can be helpful when you want to check
print quality after each page is printed.
This loading procedure is almost the same as the procedure for
loading in the Bypass tray, except you load paper sheet-by-
sheet in the tray, send print data to print the first page, and
press Enter on the control panel to print each following page.
1
Lower the Bypass tray and unfold the paper support
extension.
2
Load a sheet of print material with the side to be printed
on facing up
.
3.8
Paper Handling
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Squeeze the width guide and adjust it to the width of the
print material without bending it.
3
4
If you want the machine to stack the printed pages on the
rear output slot, open the rear door to use the rear output
slot.
CAUTION: Make sure to open the rear output slot when you print
on transparencies. If not, they may tear while exiting the machine.
5
After printing, fold away the paper support extension and
close the Bypass tray.
Tips on Using the Bypass Tray
• Load only one size of print material at a time in the Bypass
tray.
• To prevent paper jams, do not add paper when there is still
paper in the Bypass tray. This also applies to other types of
print materials.
going into the Bypass tray first and be placed in the center of
the tray.
• Always load only the print materials specified in the
Specifications on page E.6 to avoid paper jams and print
quality problems.
• Flatten any curl on postcards, envelopes, and labels before
loading them into the Bypass tray.
• When you print on 76 mm x 127 mm (3 x 5 in.) sized media
on the Bypass tray, open the rear door to use the rear output
slot.
• Make sure to open the rear door when you print on
transparencies. If not, they may tear while exiting the
machine.
Paper Handling 3.9
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting an Output Location
The machine has two output locations: the rear output slot (face
up) and the front output tray (face down).
Front output
tray
Rear output slot
To use the front output tray, make sure that the rear door is
closed. To use the rear output slot, open the rear door.
NOTES
:
• If paper coming out of the front output tray has problems, such
as excessive curl, try printing to the rear output slot.
• To avoid paper jams, do not open or close the rear door while the
machine is printing.
Printing to the Front Output Tray (Face down)
The front output tray collects printed paper face down, in the
order in which the sheets were printed. The tray should be used
for most print jobs.
3.10
Paper Handling
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing to the Rear Output Slot (Face up)
Using the rear output slot, paper comes out of the machine
face up.
3
Printing from the Bypass tray to the rear output slot provides a
straight paper path. Using the rear output slot might improve
the output quality with the following:
• envelopes
• labels
• small custom-sized paper
• postcards
• transparencies
To use the rear output slot:
1
Open the rear door by pulling it upward.
CAUTION: The fuser area inside the rear door of your machine
becomes very hot when in use. Take care not to burn your fingers
when you access this area.
Paper Handling 3.11
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
3.12
Paper Handling
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTING TASKS
4
Windows and how to use the print settings.
This chapter includes:
• Printing Posters
• Printing a Reduced or Enlarged Document
• Using Watermarks
• About Sharing the Machine on a Network
• Setting Up a Locally-Shared Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a Document in Windows
The following procedure describes the general steps required for
printing from various Windows applications. The exact steps for
printing a document may vary depending on the application
software application for the exact printing procedure.
NOTE: For detailed information about printing from a Macintosh
computer or a Linux system, see Appendix C and Appendix A .
(Macintosh is supports only WorkCentre PE120i)
1
2
Open the document you want to print.
Select Print from the File menu. The Print window opens.
It may look slightly different depending on your application.
You can select the basic print settings within the Print
window. These settings include the number of copies and
the print range.
Make sure that your
machine is selected.
S
Windows XP
3
To take advantage of the printer features provided by your
machine, click Properties or Preferences in the
application’s Print window. Go to step 4.
If you see a Setup Printer, or Options button in your
,
Print window, click it instead. Then click Properties on the
next screen.
4
5
Click OK to close the printer properties window.
To start the print job, click OK or Print in the Print window.
4.2
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling a Print Job
There are two ways to cancel a print job:
To stop a print job from the control panel:
Press the Stop/Clear button.
Your machine finishes printing the page
that is moving through the machine and
deletes the rest of the print job. Pressing
the button cancels only the current job.
If more than one print job is in the
machine’s memory, you need to press
the button once for each job.
4
To stop a print job from the Printers folder:
If the print job is waiting in a print queue or print spooler, such
as the Printer group in Windows, delete the job as follows:
1
2
Click the Windows Start menu.
For Windows 98/NT4.0/2000/Me, select Settings and then
Printers
.
For Windows XP, select Printers and Faxes
.
3
4
Double-click the Xerox WC PE120 Series PCL 6 icon.
From the Document menu:
For Windows 98/Me, select Cancel Printing
.
For Windows NT4.0/2000/XP, select Cancel
.
NOTE: You can access this window simply by double-clicking the
machine icon at the bottom right corner of the Windows desktop.
Printing Tasks 4.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Settings
You can use the Xerox WC PE120 Series printer properties
window, which allows you to access all of the printer options you
need when using your machine. When the printer properties are
displayed, you can review and change whatever settings are
needed for your print job.
The printer’s properties window may differ, depending on your
operating system. This User’s Guide shows the Printing
Preferences window for Windows XP.
Your printer’s Printing Preferences window consists of 6 tabs:
Layout
,
Paper Image Options, Output Options,
,
.
If you access printer properties through the Printers folder, you
can view additional Windows-based tabs (refer to your Windows
User’s Guide) and the Printer Configuration tab (see
page 4.13).
NOTES
:
• Most Windows applications will override the settings you specify
in the printer driver. Change all of the print settings available in
the software application first, and change any remaining settings
using the printer driver.
• The settings you change remain in effect only while you are
using the current program. To make your changes permanent,
make them in the Printers folder. Follow this procedure:
1. Click the Windows Start menu.
2. For Windows 98/Me/NT 4.0/2000, select Settings and then
Printers
.
For Windows XP, select Printers and Faxes
.
3. Select the Xerox WC PE120 Series PCL 6 machine icon.
4. Click the right mouse button on the printer icon and:
• In Windows 98/Me, select Properties
• In Windows 2000/XP, select Printing Preferences
• In Windows NT 4.0, select Document Default
5. Change the settings on each tab, and click OK
.
.
.
.
4.4
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
Layout tab
The Layout tab provides options to adjust how the document
appears on the printed page. The More Layout Options
includes Multiple Pages per Side
,
Poster Fit to Page, and
,
Reduce/Enlarge. See page 4.2 for more information on
accessing printer properties.
1
4
The preview image
shows the sample page
with the settings you
specified.
2
Property
Description
Orientation allows you to select the
direction in which information is printed
on a page.
1
Orientation
•
Portrait prints across the width of
the page, letter style.
•
Landscape prints across the length
of the page, spreadsheet style.
If you want to turn the page upside
down, select Rotate 180 Degrees
.
S
Portrait
More Layout Options allows you to
select advanced printing options. For
details, see page 4.15~4.19.
2
More Layout
Options
Printing Tasks 4.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper Tab
Use the following options for paper handling. See page 4.2 for
more information about accessing printer properties.
Click the Paper tab to access many paper properties.
1
2
3
4
5
Property
Description
Print Quantity allows you to choose the
number of copies to be printed. You can enter
up to 999.
1
2
Print
Quantity
Size allows you to choose the size of the
paper loaded in the tray.
Size
If the required size is not listed in the Size
box, click Custom. When the Custom Page
Size window appears, set the size and click
OK. The setting appears on the list so that
you can select it.
Enter the custom name
you want to use.
Enter the paper size.
4.6
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
Property
Type
Description
Make sure that Type is set to Printer
Default. If you load a different type of print
material, select the corresponding paper type.
For more information about print materials,
see Chapter 3, Paper Handling.
3
If you use cotton paper, set the paper type to
Thick for the best printing.
To use recycled paper, which weighs from 75
g/m2 to 90 g/m2 (20 lb to 24 lb), or colored
4
paper, select Colored Paper
.
4
Source
to special material. You need to load one
sheet at a time into the Bypass tray. See
page 3.8.
If you install an optional Tray 2 and set the
Tray 2 in printer properties (see page D.8),
you can select Tray2
.
If the paper source is set to Auto Select, the
machine automatically picks up print material
in the following order: the Bypass tray, Tray 1,
and optional Tray 2.
This property allows you to print the first page
using a different paper type from the rest of
the document. You can select the paper
source for the first page.
5
Cover
Page
For example, load thick stock for the first
page into the Bypass tray, and plain paper
into Tray1. Then, select Tray1 in the Source
option and Bypass Tray in the Cover Page
option.
Printing Tasks 4.7
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Options Tab
Use the following options to adjust the print quality for your
specific printing needs. See page 4.2 for more information about
accessing printer properties.
Click the Image Options tab to display the properties shown
below.
1
2
3
4
Property
Description
You can select the printing resolution by
1
2
Print-
Quality
Mode
choosing from 1200 dpi Image Quality
600 dpi, or 300 dpi. The higher the
setting, the sharper the printed characters
and graphics. Higher settings may increase
the time it takes to print a document.
,
Some printed characters or images appear
to have jagged or uneven edges. Set this
Image Quality option to improve the print
quality of your text and image, and make
the characters and images appear smoother.
Image
Quality
•
Use Printer’s Setting: When you select
this option, this feature is determined by
the setting you’ve made on the control
panel of the machine, affecting print
quality accordingly.
•
•
Normal: This setting prints images in the
normal mode.
Text Enhance: This setting refines the
print quality of characters by smoothing
out jagged edges that can occur on the
angles and curves of each character.
Image Enhance: This setting refines
the print quality of photo images.
•
4.8
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
Property
Description
Selecting this option extends the life of your
toner cartridge and reduces your cost per
page without a significant reduction in the
print quality.
3
Toner Save
Mode
•
Use Printer’s Setting: When you select
this option, the Toner Save feature is
determined by the setting you’ve made on
the control panel of the machine affecting
print quality accordingly.
•
•
On: Select this option to allow the
4
machine to use less toner on each page.
Off: When you do not need to save toner
to print a document, select this option.
You can use advanced settings by clicking
the Graphic Options button.
4
Graphic
Options
Print Options
This option determines how the driver tells
the machine to image the text in your
document. Select the appropriate setting
according to the status of your document.
•
Print Page as Graphics: When this
option is selected, the driver will
download any TrueType fonts that are
used in your document that are not
already stored (resident) in your
machine. If, after printing a document,
you find that the fonts did not print
correctly, choose Print Text as
Bitmap and resubmit your print job.
The Print Text as Bitmap setting is
often useful when printing Adobe.
•
Print Text as Bitmap: When this
option is selected, the driver downloads
the font data as bitmap images.
Documents with complicated fonts, such
as Korean or Chinese, or various other
types of fonts, print faster in this
setting.
Printing Tasks 4.9
Download from Www.Somanuals.com. All Manuals Search And Download.
Property
Description
4
Graphic
Options
(continued)
•
Print Page as Bitmap: When this
option is selected, the driver downloads
any fonts as graphics. When printing
documents with high graphic content
and relatively few TrueType fonts,
printing performance (speed) may be
enhanced in this setting.
Print All Text Black
When the Print All Text Black option is
checked, all text in your document prints in
solid black, regardless of the color it
appears on the screen. When this option is
not checked, colored text prints in shades
of gray.
4.10
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
Output Options Tab
See page 4.2 for more information about accessing printer
properties. Click the Output Options tab to access the
following features:
1
2
3
4
Option
Description
Print Order: You can set the sequence for
the pages to print. Select the print order
from the drop-down list.
1
Print Order
•
Normal: Your machine prints all pages
from the first page to the last page.
Reverse All Pages: Your machine
prints all pages from the last page to the
first page.
•
•
•
Print Odd Pages: Your machine prints
only the odd numbered pages of the
document.
Print Even Pages: Your machine prints
only the even numbered pages of the
document.
When this option is selected, the machine
uses the fonts that are stored in its memory
(resident fonts) to print your document,
rather than downloading the fonts used in
your document. Because downloading fonts
takes time, selecting this option can speed
up your printing time.
2
Use Printer
Fonts
Printing Tasks 4.11
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Collate
Description
When this option is selected, the machine
automatically sorts the copies. For example,
if you make 2 copies of a 3 page document,
one complete 3 page document will print
followed by the second complete document.
If this option is not selected, the machine
prints 2 copies of page 1, then 2 copies of
page 2, then 2 copies of page 3 so you must
sort the document yourself after printing.
3
Watermark Tab
See page 4.2 for more information about accessing printer
properties. Click the Watermark tab to create a background
image of text to print on each page of your document. For details
about the Watermark option, see “Using Watermarks” on
page 4.20.
4.12
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
About Tab
Use the About tab to display the copyright notice and the
version number of the driver. If you have an Internet browser,
you can connect to the Internet by clicking on anywhere on the
screen. See page 4.2 for more information about accessing
printer properties.
Printer Configuration Tab
If you access printer properties through the Printers folder, you
can view the Printer Configuration tab. Click the Printer
Configuration tab to access the following properties:
4
•
Optional Tray: If you install an optional Tray 2, in the printer
properties window, you can tell the machine to recognize and
use it for PC-printing by selecting Tray 2 in the Optional
Tray drop down list.
•
High Altitude Correction: If your machine is going to be
used at an altitude above 1,500 m, checking this option will
optimize the print quality for those circumstances.
Using a Favorite Setting
The Favorites option, available on each tab, except for the
Watermark and About tabs, allows you to save the current
properties settings for future use.
To save a Favorites item:
1
2
Change the settings on each tab, as needed.
Enter a name for the item in the Favorites input box.
Printing Tasks 4.13
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Click Save.
To use a saved setting, select it from the Favorites drop-down
list.
To delete a favorite setting item, select it from the list and click
Delete
.
You can also restore the printer driver’s default settings by
selecting Printer Default from the list.
Using Help
Your machine has a help screen that can be activated using the
Help button in the printer properties window. The help screen
gives detailed information about the printer features provided
by the printer driver.
You can also click
in the upper right hand corner, and then
click on any setting.
4.14
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Multiple Pages on One
Sheet of Paper
You can select the number of pages to print on a single sheet of
reduced in size and arranged in the order you specify. You can
print up to 16 pages on one sheet.
1
3
2
4
4
1
2
To change the print settings from your software application,
access printer properties. See page 4.2.
From the Layout tab, click the More Layout Options
button.
3
4
Select Multiple Pages per Side from the Type option.
Select the number of pages you want to print per sheet (1,
2, 4, 6, 9, or 16) on the Pages per Side drop-down list.
5
Select the page order on the Page Order drop-down list, if
necessary.
Down,
Then Right
Right, Then
Down
Left, Then
Down
Down, Then
Left
Check Print Page Border to print a border around each
page on the sheet.
NOTE
:
Page Order and Print Page Border are enabled only
when the number of pages per side is 2, 4, 6, 9, or 16.
Printing Tasks 4.15
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Click OK.
Click the Paper tab and select the paper source, size, and
type.
8
Click OK and print the document.
Printing Posters
paper, for the purpose of pasting the sheets together to form
one poster-sized document.
1
2
3
To change the print settings from your software application,
access printer properties. See page 4.2.
From the Layout tab, click the More Layout Options
button.
Select Poster from the Type option.
4
Configure the poster option:
You can select the page layout from 2x2
,
3x3, 4x4, or
Custom. If you select 2x2, the image is automatically
4.16
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
stretched to cover 4 physical pages.
S
2 x 2
S
3 x 3
4
If you select Custom, you can manually set the scale rate
of the image in the Scale Factor input box.
Specify an overlap in millimeters or inches to make it easier
to reconstruct the resulting poster.
0.15 inches
0.15 inches
5
6
Click OK.
Click the Paper tab and select the paper source, size, and
type.
7
Click OK and print the document. You can complete the
poster by pasting the sheets together.
Printing Tasks 4.17
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitting Your Document to a Selected
Paper Size
original document size. This can be useful when you want to
check the fine details on a small document.
A
1
To change the print settings from your software application,
access printer properties. See page 4.2.
2
From the Layout tab, click the More Layout Options
button.
3
4
Select Fit to Page from the Type option.
Select the correct size from the Target Page drop-down
list.
5
6
7
Click OK.
Click the Paper tab and select the paper source and type.
Click OK and print the document.
4.18
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a Reduced or Enlarged
Document
You can change the size of a page’s content to appear larger or
smaller on the printed page.
1
To change the print settings from your software application,
access printer properties. See page 4.2.
4
2
From the Layout tab, click the More Layout Options
button.
3
4
Select Reduce/Enlarge from the Type option.
Enter the scaling rate in the Percentage input box.
You can also click the
S
or
T
button.
5
6
Click OK.
Click the Paper tab and select the paper source, size, and
type.
7
Click OK and print the document.
Printing Tasks 4.19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Watermarks
The Watermark option allows you to print text over an existing
document. For example, you may want to have large gray letters
reading “DRAFT” or “CONFIDENTIAL” printed diagonally across
the first page or all of the pages of a document.
There are several predefined watermarks that come with your
machine, and they can be modified or you can add new ones to
the list.
Using an Existing Watermark
1
To change the print settings from your software application,
access printer properties. See page 4.2.
2
Click the Watermark tab and select a watermark on the
Current Watermarks section. It appears in the preview
image window.
Preview
image
3
Click OK and start printing.
4.20
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Watermark
1
To change the print settings from your software application,
access printer properties. See page 4.2.
2
3
Click the Watermark tab.
Select [No Watermark] on the Current Watermarks
section.
4
4
5
Enter the text message you want to print in the
Watermark Message box.
The message displays in the preview image window.
When the First Page Only box is checked, the watermark
prints on the first page only
.
Select the watermark options.
You can select the font name, style, size, and gray scale
level from the Font Attributes section and set the angle of
the watermark from the Message Angle section.
6
7
Click Add to add the new watermark to the list.
When you finish creating, click OK and start printing.
To stop printing the watermark, select [No Watermark] on the
Current Watermarks section.
Printing Tasks 4.21
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a Watermark
1
To change the print settings from your software application,
access printer properties. See page 4.2.
2
3
Click the Watermark tab.
Select the watermark you want to edit on the Current
Watermarks section. You can change the watermark
message and the options. Refer to page 4.21.
4
Click Update to save the changes.
Deleting a Watermark
1
To change the print settings from your software application,
access printer properties. See page 4.2.
2
3
Click the Watermark tab.
Select the watermark you want to delete on the Current
Watermarks section and click Delete
.
4
Click OK
.
4.22
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
About Sharing the Machine on a
Network
If you work in a networked environment, you can connect your
machine to the network.
Locally-Shared Machine
4
You can connect the machine directly to a selected computer,
which is called the “host computer” on the network. The
machine can then be shared by other users on the network
through a Windows 98/Me/NT 4.0/2000/XP network printer
connection.
Printing Across a Network (WorkCentre PE120i only)
Whether the machine is locally-connected or network-
connected, you need to install the WorkCentre PE120i printer
software on each computer that prints documents using the
machine.
Printing Tasks 4.23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up a Locally-Shared
Machine
In Windows 98/Me
Setting Up the Host Computer
1
2
Start Windows.
From the Start menu, select Control Panel from Settings
and double-click on the Network icon.
3
4
Check the File and Print Sharing box, and click OK. Close
the window.
From the Start menu, select Printers from Settings and
double-click your machine name.
5
6
Select Properties in the Printer menu.
Click the Sharing tab and check the Shared As box. Fill in
the Shared Name field and click OK
.
Setting Up the Client Computer
1
2
3
Right-click the Windows Start button and select Explorer
.
Open your network folder in the left column.
Right-click the shared name and select Capture Printer
Port
.
4
Select the port you want, check the Reconnect at log on
box, and click OK
.
5
6
7
8
From the Start menu, select Settings and then Printers.
Double-click your machine icon.
From the Printer menu, select Properties
.
From the Details tab, select the printer port and click OK
.
4.24
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
In Windows NT 4.0/2000/XP
Setting Up the Host Computer
1
2
Start Windows.
For Windows NT 4.0/2000, from the Start menu, select
Settings and then Printers
.
For Windows XP, from the Start menu, select Printers and
Faxes
.
4
3
4
5
Double-click your machine icon.
From the Printer menu, select Sharing
.
For Windows NT 4.0, check the Shared box.
For Windows 2000, check the Shared As box.
For Windows XP, check the Share this printer box.
6
Fill in the Shared Name field and click OK.
Setting Up the Client Computer
1
2
3
4
Right-click the Windows Start button and select Explorer
.
Open your network folder in the left column.
Click the shared name.
For Windows NT 4.0/2000, from the Start menu, select
Settings and Printers
.
For Windows XP, from the Start menu, select Printers and
Faxes
.
5
6
7
8
Double-click your machine icon.
From the Printer menu, select Properties
.
From the Ports tab, click Add Port
.
Select Local port and click New Port
.
Printing Tasks 4.25
Download from Www.Somanuals.com. All Manuals Search And Download.
9
In the Enter a port name field, enter the shared name.
10Click OK and click Close.
11For Windows NT 4.0, click OK.
For Windows 2000/XP, click Apply and click OK
.
4.26
Printing Tasks
Download from Www.Somanuals.com. All Manuals Search And Download.
The instructions for loading print materials are the same
whether you are printing, faxing, or copying. For further details,
see page 2.7 for loading in the paper tray and page 3.6 for
loading in the Bypass tray.
NOTE For copying, you can only use Letter-, A4-, Legal-,
:
Folio-, Executive-, B5-, A5-, or A6-sized print materials.
Selecting the Paper Tray
After loading the print media for copy output, you have to select
the paper tray you will use for the copy job.
1
Press Menu on the control panel.
The first available menu item, “Paper Setting,” appears on
the top line of the display and “Copy Tray” appears on the
bottom line of the display.
2
3
Press Enter.
Press the scroll button (
want appears on the display.
W
or
X) until the paper tray you
You can select Tray1, Tray2, MP Tray, Tray1/2, or Auto. If
you do not install the optional Tray 2, the Tray2 and Tray1/
2 menu item will not appear on the display.
4
5
Press Enter to save the selection.
To return to Standby mode, press Stop/Clear
.
5.2
Copying
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing a Document
You can use the document glass or the Automatic Document
Feeder (ADF) to load an original document for copying,
scanning, and sending a fax. Using the ADF, you can load up to
50 documents (47~ 105 g/m2, 12.5 ~ 28 lb) for one job. You
can, of course, place only one sheet at a time on the document
glass.
When you use the ADF:
• Do not load documents smaller than 142 x 127 mm or
larger than 216 x 356 mm.
5
• Do not attempt to feed the following types of documents:
- carbon-paper or carbon-backed paper
- coated paper
- onion skin or thin paper
- wrinkled or creased paper
- curled or rolled paper
- torn paper
• Remove all staples and paper clips before loading
documents.
• Make sure any glue, ink, or correction fluid on the paper is
completely dry before loading documents.
• Do not load documents that include different sizes or
weights of paper.
• Do not load booklet, pamphlet, transparencies, or
documents having other unusual characteristics.
Copying
5.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies on the Document
Glass
1
Lift and open the document cover.
2
Place the document face down on the document glass and
align it with the registration guide at the top left corner of
the glass.
NOTE: Make sure that no documents are in the ADF (Automatic
Document Feeder). If a document is detected in the ADF, the
machine gives it priority over the document on the document
glass.
3
Close the document cover.
NOTES
:
• Leaving the cover open while copying may affect copy quality
and toner consumption.
• If you are copying a page from a book or magazine, lift the cover
until its hinges are caught by the stopper and then close the
cover. If the book or magazine is thicker than 30 mm, start
copying with the cover open.
5.4
Copying
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Customize the copy settings including number of copies,
copy size, darkness, and original type, by using the control
panel buttons. See “Setting Copy Options” on page 5.7.
To clear the settings, use the Stop/Clear button.
5
6
If necessary, you can use special copy features, such as
Poster, Auto Fit, Clone, and 2 Sides on 1 page copying.
Press Start to begin copying.
The display shows the copy processing.
NOTES
:
5
• You can cancel the copy job during an operation. Press Stop/
Clear, and the copying will stop.
• Dust on the document glass may cause black spots on the
printout. Always keep it clean.
• To get the best scan quality, especially for colored or gray-scaled
images, use the document glass.
Making Copies from the Automatic
Document Feeder
1
Load the document face up into the ADF (Automatic
Document Feeder). You can insert up to 50 sheets at a
time. Make sure that the bottom of the document stack
matches the paper size marked on the document tray.
Copying
5.5
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Adjust the document guides to the document size.
3
Customize the copy settings including number of copies,
copy size, darkness, and original type, by using the control
panel buttons. See “Setting Copy Options” on page 5.7.
To clear the settings, use the Stop/Clear button.
4
5
If necessary, you can use special copy features, such as
Collation and 2 or 4 Up-copying.
Press Start to begin copying.
The display shows the copy processing.
NOTE: Dust on the ADF glass may cause black lines on the
printout. Always keep it clean.
5.6
Copying
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Copy Options
The buttons on the control panel let you select all basic copy
options: darkness, document type, copy size, and number of
copies. Set the following options for the current copy job before
pressing Start to make copies.
NOTE: If you press Stop/Clear while setting the copy options, all
of the options you have set for the current copy job will be
canceled and returned to their default status. Or, they will
automatically return to their default status after the machine
completes the copy in progress.
5
Darkness
If you have an original document containing faint markings or
dark images, you can adjust the contrast to make a copy that is
easier to read.
To adjust the contrast, press Lighten/Darken
.
Each time you press the button, the LED labeled with the
selected mode lights.
You can choose from the following contrast modes:
•
•
Lighten: works well with dark print.
Normal: works well with standard typed or printed
documents.
•
Darken: works well with light print or faint pencil
markings.
Original Type
The Original Type setting is used to improve the copy quality by
selecting the document type for the current copy job.
To select the document type, press Original Type
.
Each time you press the button, the LED labeled with the
selected mode lights.
You can choose from the following image modes:
•
•
Text: Use for documents containing mostly text.
Text/Photo: Use for documents with mixed text and
photographs.
•
Photo: Use when the originals are photographs.
NOTE: When you copy a document containing color on the
background, such as a newspaper or a catalog, the background will
appear on your copy. If you want to reduce the background,
change the Lighten/Darken setting to Lighten and/or the
Original Type setting to Text
.
Copying
5.7
Download from Www.Somanuals.com. All Manuals Search And Download.
Reduced/Enlarged Copy
Using the Reduce/Enlarge button, you can reduce or enlarge
the size of a copied image from 25% to 400% when you copy
original documents from the document glass or from 25% to
100% from the ADF. Note that the zoom rate available is
different depending on the document loading method.
To select from the predefined copy sizes:
1
Press Reduce/Enlarge.
The default setting appears on the bottom line of the
display.
2
3
Press Reduce/Enlarge or the scroll button (W or X) to
find the size setting you want.
Press Enter to save the selection.
To fine-tune the size of copies:
1
2
Press Reduce/Enlarge.
Press Reduce/Enlarge or the scroll button (
until “Custom:25-100%” or “Custom:25-400%” displays
W or X)
on the bottom line. Press Enter
.
3
Press the scroll button (
want appears on the display.
W
or
X) until the copy size you
Pressing and holding the button allows you to quickly scroll
to the number you want.
You can also enter the value using the number keypad.
4
Press Enter to save the selection.
NOTE: When you make a reduced copy, black lines may appear at
the bottom of your copy.
5.8
Copying
Download from Www.Somanuals.com. All Manuals Search And Download.
Number of Copies
Using the No. of Copies button, you can select the number of
copies from 1 to 99.
1
2
Press No. of Copies.
Press the scroll button (
appears on the display.
W
or
X) until the number you want
Pressing and holding the button allows you to quickly scroll
to the number you want.
You can also enter the value using the number keypad.
3
Press Enter to save the selection.
5
Using Special Copy Features
You can use the following copy features using the More
Features button on the control panel:
•
•
Clone Prints multiple image copies from the original
document on a single page. The number of images is
automatically determined by the original image and paper
size. See page 5.10.
:
•
•
Copy Collate: Sorts the copy job. For example, if you make
2 copies of a 3 page document, one complete 3 page
document. See page 5.10.
image to fit on the paper currently loaded in the machine.
See page 5.11.
•
•
•
2 sides in 1pg
sheet of paper. See page 5.11.
:
Prints 2-sided original document on one
2
/
sheet of paper. See page 5.12.
Poster: Prints an image onto 9 sheets of paper (3x3). You
can paste the printed pages together to make one poster-
sized document. See page 5.13.
NOTE: Some features may not be available depending on where
you loaded the document, on the document glass or in the
Automatic Document Feeder.
Copying
5.9
Download from Www.Somanuals.com. All Manuals Search And Download.
Clone Copying
This special copy feature can be applied only when you place a
document on the document glass. If a document is detected in
the ADF, Clone copying feature does not work.
1
Place the document to be copied on the document glass,
and close the cover.
2
3
Press More Features.
Press More Features or the scroll button (
“Clone” displays on the bottom line.
W
or
X) until
4
5
If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the
control panel buttons. See “Setting Copy Options” on
page 5.7.
NOTE: You cannot adjust the copy size using the Reduce/
Enlarge button while making a clone copy.
6
Press Start begin copying.
Collation Copying
This special copy feature is available only when you load
documents in the ADF.
1
1
2
2
3
3
1
2
3
Load the documents to be copied in the ADF.
Press More Features
.
Press More Features or the scroll button (
W
or
X) until
“Copy Collate” displays on the bottom line.
4
5
If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the
control panel buttons. See “Setting Copy Options” on
page 5.7.
6
Press Start to begin copying.
5.10
Copying
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Fit Copying
This special copy feature can be applied only when you place a
document on the document glass. If a document is detected in
the ADF, Auto Fit copying does not work.
A
1
Place the document to be copied on the document glass,
and close the cover.
2
3
Press More Features.
Press More Features or the scroll button (
“Auto Fit” appears on the bottom line.
W
or
X) until
4
5
If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the
control panel buttons. See “Setting Copy Options” on
page 5.7.
NOTE: You cannot adjust the copy size using the Reduce/
Enlarge button while Auto Fit copying is enabled.
6
Press Start to begin copying.
2 Sides on 1 Page Copying
You can copy a 2-sided document on one side of one page of
A4-, Letter-, Legal-, Folio-, Executive-, B5-, A5-, or A6-sized
paper.
When you copy using this feature, the machine prints one side
of the document on the upper half of the paper and the other
side on the lower half without reducing the size of the original.
This feature is helpful for copying a small-sized document, such
as a name card.
If the original document is larger than the printable area, some
portions may not be printed.
This special copy feature can be applied only when you place a
document on the document glass. If a document is detected in
the ADF, 2 Sides on 1 Page copying feature does not work.
1
2
Place the document to be copied on the document glass
and close the cover.
Press More Features
.
Copying
5.11
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press More Features or the scroll button (
sides in 1pg” displays on the bottom line.
W
or
X) until “2
4
5
If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the
control panel buttons. See “Setting Copy Options” on
page 5.7.
6
7
Press Start to begin copying.
Your machine begins scanning the front side.
When “Set Backside” displays on the bottom line, open the
document cover and flip the document over. Close the
cover.
NOTE: If you press the Stop/Clear button or if no buttons are
pressed for approximately 30 seconds, the machine cancels the
copy job and returns to Standby mode.
8
Press Start again.
2 Up or 4 Up Copying
This special copy feature is available only when you load
documents in the ADF.
1
2
3
Load the documents to be copied in the ADF.
Press More Features
.
S
2-up copying
Press More Features or the scroll button (
W
or
X) until “2
UP” or “4 UP” displays on the bottom line.
1
2
4
4
5
3
If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the
control panel buttons. See “Setting Copy Options” on
page 5.7.
S
4-up copying
NOTE: You cannot adjust the copy size using the Reduce/
Enlarge button for making a 2 or 4 Up copy.
6
Press Start to begin copying.
5.12
Copying
Download from Www.Somanuals.com. All Manuals Search And Download.
Poster Copying
This special copy feature can be applied only when you place a
document on the document glass. If a document is detected in
the ADF, the Poster copying feature does not work.
1
Place the document to be copied on the document glass
and close the cover.
2
3
Press More Features.
Press More Features or the scroll button (
“Poster” displays on the bottom line.
W
or
X) until
4
5
If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the
control panel buttons. See “Setting Copy Options” on
page 5.7.
NOTE: You cannot adjust the copy size using the Reduce/
Enlarge button when making a poster.
6
Press Start to begin copying.
Your original document is divided into 9
portions. Each portion is scanned and
printed one by one in the following order:
Copying
5.13
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Default Settings
The copy options, including darkness, original type, copy size,
and number of copies, can be set to the most frequently used
modes. When you copy a document, the default settings are
used unless they are changed by using the corresponding
buttons on the control panel.
To create your own default settings:
1
Press Menu on the control panel until “Copy Setup”
appears on the top line of the display.
The first menu item, “Default-Change,” appears on the
bottom line.
2
3
4
5
Press Enter to access the menu item. The first setup
option, “Lighten/Darken,” appears on the bottom line.
Press the scroll button (
W
or
X) to scroll through the setup
options.
When the option you want to set appears, press Enter to
access the option.
Change the setting using the scroll button (
W
or
X).
You can also enter the value using the number keypad.
Press Enter to save the selection.
6
7
8
Repeat steps 3 through 6, as needed.
To return to Standby mode, press Stop/Clear
.
NOTE: While you are setting copy options, pressing Stop/Clear
cancels the changed settings and restores their default status.
5.14
Copying
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Time Out Option
You can set the time the machine waits before it restores the
default copy settings, if you do not start copying after changing
them on the control panel.
1
2
Press Menu on the control panel until “Copy Setup”
appears on the top line of the display.
Press the scroll button (
W
or
X) to display “Timeout” on the
bottom line.
5
3
4
Press Enter to access the menu item.
Press the scroll button (
appears on the display.
W
or
X) until the status you want
You can select from 15, 30, 60, 120, and 180 (seconds).
Selecting “Off” means that the machine does not restore
the default settings until you press Start to begin copying,
or Stop/Clear to cancel.
5
6
Press Enter to make your selection.
To return to Standby mode, press Stop/Clear
.
Copying
5.15
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
5.16
Copying
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING
6
Scanning with your machine lets you turn pictures and
text into digital files on your computer. Then you can fax
or E-mail the files, display them on your web site, or use
driver.
This chapter includes:
• Scanning Basics
• Scanning From the Control Panel to an Application
• Scanning Using the WIA Driver
• Scanning to USB Flash Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning Basics
Your Xerox WC PE120 Series offers three ways to scan. These
are:
• From the control panel on your machine to an application:
Use the Scan-to... button on the control panel to initiate
Adobe PhotoDeluxe or Adobe Photoshop, to the machine
by selecting it from the list of available applications via the
Scan-to... button. Before assigning the software program,
For details, see page 2.37.
• From the Windows Images Acquisition (WIA) driver: Your
machine also supports the WIA driver for scanning
images. See page 6.4.
• To a USB flash drive: When you insert a USB flash drive
into the USB port in the front of your machine, you can
scan and save documents in the USB flash drive by
pressing Scan-to.... For details, see page 6.5.
NOTES
:
• To scan with your machine, you must install the MFP driver.
• Scanning is done through the same LPT or USB port currently
assigned for your printer port.
6.2
Scanning
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning From the Control Panel to
an Application
1
2
Make sure that your machine and computer are turned on
and properly connected to each other.
Load the document(s) face up into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see page 7.6.
3
Press Scan-to.... on the control panel.
6
The first available menu item, "USB Memory" appears on
the bottom line of the display.
4
5
Press Enter and press the scroll button (
an application to which you want to send the scanned
image.
W
or
X) to select
Press Start. The selected application window opens. Adjust
the scan settings and start scan. For details, please refer to
the User’s Guide of the application.
Scanning
6.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning Using the WIA Driver
Your machine also supports the Windows Image Acquisition
(WIA) driver for scanning images. WIA is one of the standard
components provided by Microsoft
Windows
XP and works
with digital cameras and scanners. Unlike the TWAIN driver, the
WIA driver allows you to scan and easily manipulate images
without using additional software.
NOTE: The WIA driver works only with Windows XP and via the
USB port.
1
Load the document(s) face up into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see page 7.6.
2
From the Start menu on your desktop window, select
Settings
,
Control Panel, and then Scanners and
Cameras
.
3
4
Double click your machine icon. The Scanner and Camera
Wizard launches.
Choose your scanning preferences and click Preview to
see how your preferences affect the picture.
6.4
Scanning
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Click Next.
Enter a picture name, and select a file format and
destination to save the picture.
7
Follow the on-screen instructions to edit the picture after it
is copied to your computer.
NOTE: If you want to cancel the scan job, press the Stop/Clear
button on the control panel.
6
Scanning to USB Flash Drive
Using a USB flash drive, you can scan and save documents in
the USB flash drive by pressing Scan-to... on the control panel.
For details about scanning, see “Scanning to USB Flash Drive”
on page 10.3.
Scanning
6.5
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
6.6
Scanning
Download from Www.Somanuals.com. All Manuals Search And Download.
FAXING
7
This chapter gives you information about using your
machine as a fax machine.
This chapter includes:
• Sending a Fax
• Receiving a Fax
• Automatic Dialing
• Other Ways to Fax
• Additional Features
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Fax
System
Changing the Fax Setup options
1
Press Menu until “Fax Setup” appears on the top line of the
display.
The first available menu item, “Receive Mode,” displays on
the bottom line.
2
3
Press the scroll button (
menu item on the bottom line and press Enter
W
or
X) until you see the desired
.
Use the scroll button (
W
or
X) to find the desired status or
use the number keypad to enter the value for the option
you have selected.
4
Press Enter to make your selection. The next Fax Setup
option appears.
5
6
If necessary, repeat steps 2 through 4.
To return to Standby mode, press Stop/Clear
.
7.2
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Available Fax Setup Options
Option
Description
You can select the default fax receiving mode.
• In Tel mode, you can receive a fax by
picking up the handset of the extension
phone and then pressing the remote receive
code (see page 7.4). Alternatively, you can
press Manual Dial (you can hear a fax tone
from the remote machine) and then press
Start on the control panel of your machine.
• In the Fax mode, the machine answers an
incoming call and immediately goes into
fax reception mode.
• In Ans/Fax mode, the answering machine
answers an incoming call, and the caller can
leave a message on the answering machine.
If the fax machine senses a fax tone on the
line, the call automatically switches to Fax
mode.
Receive Mode
7
• In DRPD mode, you can receive a call using
the Distinctive Ring Pattern Detection
(DRPD) feature. This option is available only
when you set up the DRPD Mode. For further
details, see page 7.17.
You can specify the number of times the
machine rings, from 1 to 7, before answering
an incoming call.
Ring To
Answer
You can select the default contrast mode to fax
your documents lighter or darker.
•
•
Lighten works well with dark print.
Normal works well with standard typed or
printed documents.
Lighten/
Darken
•
Darken works well with light print or faint
pencil markings.
Your machine can automatically redial a remote
fax machine if it was busy. Intervals from 1 to
15 minutes can be entered.
Redial Term
Redials
You can specify the number of redial attempts,
from 0 to 13. If you enter
not redial.
0, the machine will
Faxing 7.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
You can set your machine to print a report
showing whether a transmission was
successful, how many pages were sent, and
MSG Confirm
more. The available options are On Off, and
,
On-Err, which prints only when a transmission
is not successful.
This produces a report with detailed
information about the previous 50
communications operations, including time and
Auto Report
dates. The available options are On or Off
.
When receiving a document containing pages
as long as or longer than the paper loaded in
the paper tray, the machine can reduce the size
of the document to fit the size of the paper
loaded in the machine. Select On if you want to
automatically reduce an incoming page.
Auto
Reduction
With this feature set to Off, the machine
cannot reduce the document to fit onto one
page. The document will be divided and printed
in actual size on two or more pages.
When receiving a document containing pages
as long as or longer than the paper installed in
your machine, you can set the machine to
discard any excess at the bottom of the page. If
the received page is outside the margin you
set, it will print in actual size on two or more
sheets of paper.
Discard Size
When the document is outside the margin and
the Auto Reduction feature is turned on, the
machine reduces the document to fit it onto the
appropriately-sized paper and discard does not
occur. If the Auto Reduction feature is turned
off or fails, data outside the margin will be
discarded. Settings range from 0 to 30 mm.
The Receive Start Code allows you to initiate
fax reception from an extension phone plugged
you pick up the extension phone and hear fax
tones, enter the Receive Start Code. The
Receive Start Code is preset to *9* at the
factory. Settings range from 0 to 9. See
page 7.16 for more information about using the
code.
RCV Start
Code
7.4
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
You can receive a call using the Distinctive Ring
Pattern Detection (DRPD) feature, which
enables a user to use a single telephone line to
answer several different telephone numbers. In
this menu, you can set the machine to
DRPD Mode
details about this feature, see page 7.17.
You can select the type of the telephone dial
system where your machine is connected. For
details about this feature, see page 2.24.
Dial Mode
7
Faxing 7.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a Fax
Loading a Document
document glass to load an original document for faxing. Using
the ADF, you can load up to 50 sheets of 75 g/m2 (20 lb) paper
at a time. You can, of course, place only one sheet at a time on
the document glass. For details about preparing a document,
see page 5.3.
To fax a document using the Automatic
Document Feeder (ADF):
1
Load the document face up into the ADF. You can insert up
to 50 sheets at a time. Make sure that the bottom of the
document stack matches the paper size marked on the
document tray.
7.6
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Adjust the document guide on the ADF to match the width
of the document.
NOTE: Dust on the ADF glass may cause black lines on the
printout. Keep it always clean.
7
To fax a document from the document glass:
1
Lift and open the document cover.
Faxing 7.7
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Place the document face down on the document glass and
align it with the registration guide at the top left corner of
the glass.
NOTE: Make sure that no other documents are in the ADF
(Automatic Document Feeder). If a document is detected in the
ADF, the machine gives it priority over the document on the
document glass.
3
Close the document cover.
NOTES
:
• If you are copying a page from a book or magazine, lift the cover
until its hinges are caught by the stopper and then close the
cover. If the book or magazine is thicker than 30 mm, start
copying with the cover open.
• To get the best scan quality, especially for colored or gray-scaled
images, use the document glass.
7.8
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Paper Tray
After loading the print material for fax output, you have to select
the paper tray you will use for the fax job.
1
2
Press Menu on the control panel.
The first available menu item, “Paper Setting,” appears on
the top line of the display.
Press the scroll button (
W
or
X) until “Fax Tray” appears on
the bottom line of the display.
3
4
Press Enter.
Press the scroll button (
want appears on the display.
W
or
X) until the paper tray you
You can select Tray1, Tray2, Tray1/2, or Auto. If you do not
install the optional Tray 2, the Tray2 and Tray1/2 menu
item will not appear on the display.
7
5
6
Press Enter to save the selection.
To return to Standby mode, press Stop/Clear
.
Adjusting the Document Resolution
The default document settings produce good results when using
typical text-based documents.
However, if you send documents that are of a poor quality, or
contain photographs, you can adjust the resolution to produce a
higher quality fax.
1
Press Resolution on the control panel.
Faxing 7.9
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
By pressing Resolution or the scroll button (
can choose from Standard, Fine, Super Fine, Photo Fax, and
Color Fax.
W
or
X), you
When the mode you want to use displays, press Enter to
make your selection.
The document types recommended for the resolution settings
are described in the table below:
Mode
Recommended for:
Standard
Documents with normal sized characters.
Documents containing small characters or thin
lines or documents printed using a dot-matrix
printer.
Fine
Documents containing extremely fine detail.
Super Fine mode is enabled only if the
machine with which you are communicating
also supports the Super Fine resolution. See
the notes below.
Super Fine
Photo Fax
Color Fax
Documents containing shades of gray or
photographs.
Documents with colors. Sending a color fax is
enabled only if the machine with which you are
communicating supports color fax reception
and you send the fax manually. In this mode,
memory transmission is not available.
NOTES
:
• For memory transmission, Super Fine mode is not available. The
resolution setting is automatically changed to Fine.
• When your machine is set to Super Fine resolution and the fax
machine with which you are communicating does not support
Super Fine resolution, the machine transmits using the highest
resolution mode supported by the other fax machine.
7.10
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a Fax Automatically
1
Load the document(s) face up into the ADF.
OR
For details about loading a document, see page 7.6.
2
3
Adjust the document resolution to suit your fax needs (see
page 7.9).
If you need to change the darkness, see page 7.3.
Enter the remote fax phone number using the number
keypad.
You can use one-touch keypad, speed dial, or group dial
numbers. For details about storing a number, see
“Automatic Dialing” on page 7.19.
7
4
5
Press Start.
When a document is placed on the document glass, the
display shows “Another Page?” on the top line after the
document is scanned into the memory. If you have the next
page, remove the scanned page and place the next page on
the glass and select “1.Yes.” Repeat as necessary.
After all of the pages are scanned, select “2.No” when the
display shows “Another Page?.”
6
The number is dialed and then the machine begins sending
the fax when the receiving fax machine is ready.
NOTE: When you want to cancel a fax job, press Stop/Clear at
any time while sending.
Faxing 7.11
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a Fax Manually
1
Load the document(s) face up into the ADF.
OR
For details about loading a document, see page 7.6.
2
Adjust the document resolution to suit your fax needs (see
page 7.9).
If you need to change the darkness, see page 7.3.
3
4
Press Manual Dial. You hear a dial tone.
Enter the receiving fax machine’s number using the number
keypad.
You can use one-touch keypad. For details about storing a
number, see page 7.19.
5
When you hear a high-pitched fax signal from the remote
fax machine, press Start
.
NOTE: When you want to cancel a fax job, press Stop/Clear at
any time while sending.
Redialing the Last Number
Press Redial/Pause
.
When a document is loaded in the ADF (Automatic Document
Feeder; see page 7.6), the machine automatically begins to
send.
For a document placed on the document glass, the display asks
if you want to load another page. Select “1.Yes” to add.
Otherwise, select “2.No.”
7.12
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Confirming Transmission
successfully, the machine beeps and returns to Standby mode.
When something goes wrong while sending your fax, an error
message appears on the display. For a list of error messages and
their meanings, see page 9.13.
message and try to send the document again.
You can set your machine to print a confirmation report
automatically each time sending a fax is completed. For further
details, see the MSG Confirm item on page 7.4.
7
Automatic Redialing
When the number you have dialed is busy or there is no answer
when you send a fax, the machine automatically redials the
number every three minutes, up to seven times according to the
factory default settings.
the number without waiting. To cancel the automatic redialing,
press Stop/Clear
.
To change the time interval between redials and the number of
redial attempts. See page 7.3.
Faxing 7.13
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a Fax
About Receiving Modes
• In Fax mode, the machine answers an incoming fax call and
immediately goes into the fax reception mode.
• In Tel mode, you can receive a fax by pressing Manual Dial
(you can hear a fax tone from the sending machine) and then
pressing Start on the control panel of your machine. You can
also pick up the handset of the extension phone and then
press the remote receive code (see page 7.4).
• In Ans/Fax mode, the answering machine answers an
incoming call, and the caller can leave a message on the
answering machine. If the fax machine senses a fax tone on
the line, the call automatically switches to Fax mode.
• In DRPD mode, you can receive a call using the Distinctive
Ring Pattern Detection (DRPD) feature. “Distinctive Ring” is a
telephone company service which enables a user to use a
single telephone line to answer several different telephone
numbers. For further details, see page 7.17.
When your machine’s memory is full, the receiving mode
automatically switches to Tel.
For details about changing the receiving mode, see page 7.3.
NOTES
:
EXT jack on the back of your machine.
• If you do not want other people to view your received
documents, you can use Secure Receiving mode. In this mode,
all of the received faxes are stored in memory. For further
details, see page 7.35.
7.14
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Paper for Receiving Faxes
The instructions for loading paper in the paper tray are the same
whether you are printing, faxing, or copying, except that faxes
can only be printed on Letter-, A4-, or Legal-sized paper. For
details about loading paper and setting the paper size in the
tray, see page 2.7 and page 2.21.
Receiving Automatically in Fax
Mode
Your machine is preset to Fax mode at the factory.
7
When you receive a fax, the machine answers the call on a
To change the number of rings, see page 7.3.
If you want to adjust the ringer volume, see “Setting Sounds”
on page 2.22.
You can receive a fax call by picking up the handset of the
extension phone and then pressing the remote receive code (see
page 7.4), or press Manual Dial (you can hear a fax tone from
the sending machine) and then pressing Start on the control
panel of your machine.
The machine begins receiving a fax and returns to Standby
mode when the reception is completed.
Faxing 7.15
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Automatically in Ans/Fax
Mode
To use this mode, you must attach an answering machine to the
EXT jack on the back of your machine. See page 2.11.
If the caller leaves a message, the answering machine stores the
message as it would normally. If your machine detects a fax
tone on the line, it automatically starts to receive the fax.
NOTES
:
• If you have set your machine to Ans/Fax mode and your
answering machine is switched off, or no answering machine is
connected to EXT jack, your machine automatically goes into Fax
mode after a predefined number of rings.
• If your answering machine has a ‘user-selectable ring counter’,
set the machine to answer incoming calls within 1 ring.
• If you are in Tel mode (manual reception) when the answering
machine is connected to your machine, you must switch off the
answering machine, or the outgoing message from the
answering machine will interrupt your phone conversation.
Receiving Manually Using an
Extension Telephone
This features works best when you are using an extension
telephone connected to the EXT jack on the back of your
machine. You can receive a fax from someone you are talking to
on the extension telephone without going to the fax machine.
When you receive a call on the extension phone and hear fax
tones, press the keys
9
on the extension telephone. The
machine receives the document.
Press the buttons slowly in sequence. If you still hear the fax
9
once again.
9
is the remote receive code preset at the factory. The first
and the last asterisks are fixed, but you can change the middle
number to whatever you wish. For details about changing the
code, see page 7.4
7.16
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes Using the DRPD
Mode
“Distinctive Ring” is a telephone company service which enables
a user to use a single telephone line to answer several different
telephone numbers. The particular number someone uses to call
you is identified by different ringing patterns, which consist of
various combinations of long and short ringing sounds. This
feature is often used by answering services who answer
telephones for many different clients and need to know which
number someone is calling in on to properly answer the phone.
Using the Distinctive Ring Pattern Detection feature, your fax
machine can “learn” the ring pattern you designate to be
answered by the fax machine. Unless you change it, this ringing
pattern will continue to be recognized and answered as a fax
call, and all other ringing patterns will be forwarded to the
extension telephone or answering machine plugged into the EXT
jack. You can easily suspend or change Distinctive Ring Pattern
Detection at any time.
7
Before using the Distinctive Ring Pattern Detection option,
Distinctive Ring service must be installed on your telephone line
by the telephone company. To set up Distinctive Ring Pattern
Detection, you will need another telephone line at your location,
or someone available to dial your fax number from outside.
To set up the DRPD mode:
1
Press Menu until “Fax Setup” appears on the top line of the
display.
The first available menu item, “Receive Mode,” displays on
the bottom line.
2
3
Press the scroll button (
on the bottom line and press Enter
W
or
X) until you see “DRPD Mode”
.
When “Set” displays on the bottom line, press Enter
.
“Waiting Ring” appears on the display.
4
Call your fax number from another telephone. It is not
necessary to place the call from a fax machine.
Faxing 7.17
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
When your machine begins to ring, do not answer the call.
The machine requires several rings to learn the pattern.
When the machine completes learning, the LCD displays
“End DRPD [Setup]”.
If the DRPD setup fails, “DRPD Ring Error” appears. Press
Enter when “DRPD Mode” displays and retry from step 3.
To return to Standby mode, press Stop/Clear
.
When the DRPD feature is set up, the DRPD option is available
in the Receive Mode menu. To receive faxes in the DRPD mode,
you need to set the menu to DRPD; see page 7.5.
NOTES
:
• DRPD must be set up again if you re-assign your fax number, or
connect the machine to another telephone line.
• After DRPD has been set up, call your fax number again to verify
that the machine answers with a fax tone. Then have a call
placed to a different number assigned to that same line to be
sure the call is forwarded to the extension telephone or
answering machine plugged into the EXT jack.
Receiving Faxes in the Memory
Since your machine is a multi-tasking device, it can receive
faxes while you are making copies or printing. If you receive a
fax while you are copying or printing, your machine stores
incoming faxes in memory. Then, as soon as you finish copying
or printing, the machine automatically prints the fax.
7.18
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Dialing
One-touch Dialing
The 20 one-touch buttons on the control panel lets you store
frequently-used fax numbers and dial a number automatically
with the touch of a button.
Using the 21 - 40 button, you can store up to 40 fax numbers
on the one-touch buttons.
Storing a Number for One-touch Dialing
1
Press and hold one of the one-touch dial buttons for about
2 seconds.
7
If you want to use one-touch dial buttons from 21 to 40,
press 21 - 40 and hold down the one-touch dial button for
about 2 seconds.
The display asks you to enter the fax number. “T” signifies
that you are assigning a one-touch dial button.
If a number is already stored in the location you chose, the
display shows the number to allow you to change it. To
start over with another one-touch button, press Stop/
Clear
.
2
3
Enter the number you want to store using the number
keypad and press Enter
.
To insert a pause between numbers, press Redial/Pause
The symbol “-” appears on the display.
.
W
button and re-enter the correct number.
To assign a name to the number, enter the name you want.
For details about entering characters, see page 2.17.
If you do not want to assign a name, skip this step.
Faxing 7.19
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Press Enter when the name appears correctly or without
entering a name.
To store more numbers, press a one-touch button and
repeat steps 2 through 4.
OR
To return to Standby mode, press Stop/Clear
.
Sending a Fax using a One-touch Number
1
Load the document(s) face up into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see page 7.6.
2
Adjust the document resolution to suit your fax needs (see
page 7.9).
If you need to change the darkness, see page 7.3.
3
4
Press the one-touch button where you stored a number.
The document scans into memory.
The machine dials the fax number stored in the one-touch
dial location and the document is sent when the receiving
fax machine answers.
7.20
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Speed Dialing
You can store up to 200 frequently dialed numbers in one, two,
or three-digit speed dial locations (0-199).
Storing a Number for Speed Dialing
1
2
Press Phone Book on the control panel.
Press Phone Book or the scroll button (
W
or
X) to display
“Store&Edit” on the bottom line of the display. Press Enter
.
3
4
Press Enter when “Speed Dials” appears on the display.
The display prompts you to enter a location number,
showing the first available number.
Enter a speed dial number between 0 and 199, using the
7
number keypad or the scroll button (
Enter
W
or
X) and press
.
If a number is already stored in the location you chose, the
display shows the number to allow you to change it. To
start over with another speed-dial number, press Exit
.
5
6
Enter the number you want to store using the number
keypad and press Enter
.
The symbol “ ” appears on the display.
−
To assign a name to the number, enter the name you want.
For details about entering characters, see page 2.17.
OR
If you do not want to assign a name, skip this step.
7
8
Press Enter when the name appears correctly or without
entering a name.
To store more fax numbers, repeat steps 4 through 7.
OR
To return to Standby mode, press Stop/Clear
.
Faxing 7.21
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a Fax using a Speed Dial Number
1
Feed the document(s) face up into the ADF.
Or
For details about loading a document, see page 7.6.
2
3
Adjust the document resolution to suit your fax needs (see
page 7.9).
If you need to change the darkness, see page 7.3.
Enter the speed dial number.
• For a one-digit speed dial number, press and hold the
appropriate digit button.
• For a two or three-digit speed dial number, press the first
digit button(s) and press and hold the last digit button.
4
5
The corresponding entry’s name briefly displays.
The document scans into memory.
When a document is placed on the document glass, the
LCD display asks if you want to send another page. Select
“1.Yes” to add more documents or “2.No” to begin sending
the fax immediately.
6
The fax number stored in the speed dial location is
automatically dialed. The document is sent when the
receiving fax machine answers.
7.22
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Group Dialing
If you frequently send the same document to several
destinations, you can create a group of these destinations and
set them under a group dial location. This enables you to use a
group dial number setting to send the same document to all the
destinations in the group.
Setting a Group Dial Number
1
2
Press Phone Book on the control panel.
Press Phone Book or the scroll button (
W
or
X) to display
“Store&Edit” on the bottom line of the display. Press Enter
.
3
4
Press the scroll button (
the bottom line and press Enter
W
or
X) to display “Group Dials” on
.
7
Press Enter when “New” displays on the bottom line.
The display prompts you to enter a location number,
showing the first available number.
5
6
Enter a group number between 0 and 199 using the
number keypad or the scroll button (
Enter
W
or
X) and press
.
Press a one-touch dial button or enter a speed dial number
you want to include in the group and press Enter
.
You can also select the one-touch dial button or speed dial
number stored in the machine by pressing the scroll button
(
W
or
X) and then press Enter.
7
8
9
When the display confirms the number to be added to the
group, press Enter
.
Repeat steps 6 and 7 to enter other one-touch dial or speed
dial numbers into the group.
Press the Exit button when you have entered all of the
desired numbers. The display prompts you to enter a group
ID.
Faxing 7.23
Download from Www.Somanuals.com. All Manuals Search And Download.
10 To assign a name to the group, enter the name you want.
For details about entering characters, see page 2.17.
OR
If you do not want to assign a name, skip this step.
11 Press Enter when the name appears correctly or without
entering a name.
12 If you want to assign another group, press Enter and
repeat from step 5.
OR
To return to Standby mode, press Stop/Clear
.
NOTE: You cannot include one group dial number in another group
dial number.
Editing Group Dial Numbers
You can delete a specific speed dial number from a selected
group or add a new number to the selected group.
1
2
Press Phone Book on the control panel.
Press Phone Book or the scroll button (
W
or
X) to display
“Store&Edit” on the bottom line of the display. Press Enter
.
3
4
5
Press the scroll button (
the bottom line and press Enter
W
or
X) to display “Group Dials” on
.
Press the scroll button (
bottom line and press Enter
W
or
X) to display “Edit” on the
.
Enter the group number you want to edit or select the
group number by pressing the scroll button ( or ) and
press Enter
W
X
.
6
Press a one-touch dial button or enter the speed dial
number you want to add or delete.
You can also select the one-touch dial number or speed dial
number you want to delete by pressing the scroll button (
or ).
W
X
7.24
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
Press Enter.
When you enter the specific number in the group, the
display shows “Delete?.”
When you enter a new number, the display shows “Add?.”
9
Press Enter to add or delete the number.
10 To change the group name, press Exit.
11 Enter a new group name and press Enter.
12 If you want to edit another group, press Enter and repeat
from step 5.
Or
To return to Standby mode, press Stop/Clear
.
7
Sending a Fax Using Group Dialing
(Multi-address Transmission)
transmissions.
Follow the procedure of the operation (Broadcast fax: see
page 7.28, Delayed fax: see page 7.29, Priority fax: see
page 7.31). When you come to a step in which the display asks
you to enter the receiving fax number:
• For a one-digit group number, press and hold the appropriate
digit button.
• For a two or three-digit group number, press the first digit
button(s) and press and hold the last digit button.
You can use only one group number for one operation. Then
continue the procedure to complete the desired operation.
Your machine automatically scans a document loaded in the
Automatic Document Feeder or on the document glass into
memory. The machine dials each of the numbers included in the
group.
Faxing 7.25
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a Number in Memory
There are two ways to search for a number in the machine’s
memory. You can either scan from A to Z sequentially, or you
can search using the first letter of the name associated with the
number.
Searching Sequentially through the Memory
1
2
3
Press Phone Book
Press Enter when “Search&Dial” appears on the display.
Press the scroll button ( or ) to scroll through the
machine’s memory until the name and number you want to
dial display. You can search upwards or downwards through
the entire memory in alphabetical order, from A to Z.
.
W
X
While searching through the machine’s memory, you can
see that each entry is preceded by one of three letters; “T”
for one-touch dial, “S” for speed dial or “G” for group dial
numbers. These letters tell you how the number is stored.
4
When the name and/or the number you want displays,
press Start or Enter to dial.
Searching with a Particular First Letter
1
2
3
Press Phone Book.
Press Enter when “Search&Dial” appears on the display.
Press the button labeled with the letter you want to search
for. A name beginning with the letter displays.
For example, if you want to find the name “MOBILE” press
the
6
button, which is labeled with “MNO.”
4
5
Press the scroll button (
W
or ) to display the next name.
X
When the name and/or the number you want displays,
press Start or Enter to dial.
7.26
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a Phonebook List
You can check your automatic dial setting by printing a
Phonebook list.
1
2
Press Phone Book.
Press Phone Book or the scroll button (
“Print” appears on the bottom line and press Enter
W
or
X) until
.
A list showing your one-touch dial, speed dial, and group
dial entries prints out.
7
Faxing 7.27
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Ways to Fax
Sending Broadcast Faxes
Using the Broadcast button on the control panel, you can use
the broadcast fax feature, which allows you to send a document
to multiple locations. Documents are automatically stored in
memory and sent to a remote station. After transmission, the
documents are automatically erased from memory.
1
2
Load the document(s) face up into the ADF.
OR
For details about loading a document, see page 7.6.
Adjust the document resolution to suit your fax needs (see
page 7.9).
If you need to change the darkness, see page 7.3.
3
4
Press Broadcast on the control panel.
Enter the number of the first receiving machine using the
number keypad.
You can use one-touch keypad, speed dial, or group dial
numbers. For details, see “Automatic Dialing” on page 7.19.
5
Press Enter to confirm the number. The display asks you to
enter another fax number to send the document.
NOTE: The Another No. prompt does not appear if you have added
numbers for another broadcast or delay fax job. You must wait
until the job is completed.
6
To enter more fax numbers, press
repeat steps 4 and 5. You can add up to 10 destinations.
1
to select “Yes” and
Note that you cannot use more than one group dial number
in any one broadcast.
7.28
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
7
When you finish entering fax numbers, press
“No” at the Another No. prompt.
2
to select
The document is scanned into memory before transmission.
The display shows memory capacity and the number of
pages being stored in memory.
For a document placed on the document glass, the display
asks if you want to load another page. Select “1.Yes” to
add. Otherwise, select “2.No.”
8
The machine begins sending the document to the numbers
you entered in the order in which you entered them.
Sending a Delayed Fax
7
You can set your machine to send a fax at a later time when you
will not be present.
1
Load the document(s) face up into the ADF.
OR
For details about loading a document, see page 7.6.
2
3
Adjust the document resolution to suit your fax needs (see
page 7.9).
If you need to change the darkness, see page 7.3.
Press Menu until “Fax Feature” appears on the top line of
the display. The first available menu item, “Delay Fax,”
displays on the bottom line.
4
5
Press Enter.
Enter the number of the receiving machine using the
number keypad.
You can use one-touch keypad, speed dial, or group dial
numbers. For details, see “Automatic Dialing” on page 7.19.
Faxing 7.29
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Press Enter to confirm the number on the display. The
display asks you to enter another fax number to which to
send the document.
NOTE: The Another No. prompt does not appear if you have added
numbers for another broadcast or delay fax job. You must wait
until the job is completed.
7
To enter more fax numbers, press
repeat steps 5 and 6. You can add up to 10 destinations.
1
to select “Yes” and
Note that you cannot use more than one group dial number
in any one broadcast.
8
9
When you finish entering fax numbers, press
“No at the Another No. prompt.
2
to select
”
The display asks you to enter a name.
To assign a name to the transmission, enter the name you
want. For details about entering characters, see page 2.17.
If you do not want to assign a name, skip this step.
10 Press Enter. The display shows the current time and asks
you to enter the starting time when the fax is to be sent.
11 Enter the time using the number keypad.
To select “AM” or “PM” for 12-hour format, press the
button or any number button.
or
If you set a time earlier than the current time, the
document will be sent at that time on the following day.
12 Press Enter when the starting time displays correctly.
13 The document is scanned into memory before transmission.
The display shows memory capacity and the number of
pages being stored in memory.
For a document placed on the document glass, the display
asks if you want to load another page. Select “1.Yes” to
add. Otherwise, select “2.No.”
7.30
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
set.
NOTE: If you want to cancel the delayed transmission, see
“Canceling a Scheduled Fax” on page 7.34.
Sending a Priority Fax
Using the Priority Fax feature, a high priority document can be
sent ahead of reserved operations. The document is scanned
into memory and transmitted when the current operation is
finished. In addition, priority transmission will interrupt a
broadcast operation between stations (i.e., when the
transmission to station A ends, before transmission to station B
begins) or between redial attempts.
7
1
Load the document(s) face up into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see page 7.6.
2
Adjust the document resolution to suit your fax needs (see
page 7.9).
If you need to change the darkness, see page 7.3.
3
4
5
Press Menu until “Fax Feature” appears on the top line of
the display.
Press the scroll button (
W
or
X) to display “Priority Fax” on
the bottom line and press Enter
.
Enter the number of the receiving machine using the
number keypad.
You can use one-touch keypad, speed dial, or group dial
numbers. For details, see “Automatic Dialing” on page 7.19.
Faxing 7.31
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
enter a name.
To assign a name to the transmission, enter the name you
want. For details about entering characters, see page 2.17.
If you do not want to assign a name, skip this step.
8
Press Enter.
The document is scanned into memory before transmission.
The display shows memory capacity and the number of
pages being stored in memory.
For a document placed on the document glass, the display
asks if you want to load another page. Select “1.Yes” to
add. Otherwise, select “2.No.”
9
The machine shows the number being dialed and begins
sending the document.
7.32
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Documents To a Scheduled
Fax
You can add documents to a delayed transmission previously
reserved in your machine’s memory.
1
Load the document(s) face up into the ADF.
OR
For details about loading a document, see page 7.6.
2
Adjust the document resolution to suit your fax needs (see
page 7.9).
If you need to change the darkness, see page 7.3.
7
3
4
Press Menu until “Fax Feature” appears on the top line of
the display.
Press the scroll button (
W
or
X) to display “Add Page” on
the bottom line and press Enter
.
The display shows the last job reserved in memory.
5
Press the scroll button (
which you want to add documents and press Enter
W
or
X) until you see the fax job to
.
The machine automatically stores the documents in
memory, and the display shows memory capacity and the
number of pages.
For a document placed on the document glass, the display
asks if you want to load another page. Select “1.Yes” to
add. Otherwise, select “2.No.”
6
After storing, the machine displays the numbers of total
pages and added pages and then returns to Standby mode.
Faxing 7.33
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling a Scheduled Fax
1
2
Press Menu until “Fax Feature” appears on the top line of
the display.
Press the scroll button (
W
or
X) to display “Cancel Job” on
the bottom line and press Enter
.
The display shows the last job reserved in memory.
3
4
Press the scroll button (
you want to cancel, and press Enter
W
or
X) until you see the fax job
.
When the display confirms your selection, press
“Yes.” The selected job is canceled and the machine returns
to Standby mode.
1
to select
To cancel your selection, press
2
to select “No.”
7.34
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Features
Using Secure Receiving Mode
You may need to prevent your received faxes from being
accessed by unauthorized people. You can turn on Secure
Receiving mode to restrict printing of received faxes when the
machine is unattended. In Secure Receiving mode, all incoming
faxes go into memory. When the mode is deactivated, any
stored faxes are printed.
To turn Secure Receiving mode on:
1
2
3
4
Press Menu until “Advanced Fax” appears on the top line of
the display.
7
Press the scroll button (
W
or
X) until “Secure Receive”
appears on the bottom line and press Enter
.
Press the scroll button (
W
or
X) to display “On” on the
bottom line and press Enter
.
Enter a four-digit passcode you want to use, using the
number keypad and press Enter
.
NOTE: You can activate Secure Receiving mode without setting a
passcode, but cannot protect your faxes.
5
6
Re-enter the passcode to confirm it and press Enter
.
To return to Standby mode, press Stop/Clear
.
When a fax is received in Secure Receiving mode, your machine
stores it in memory and displays “Secure Receive” to let you
know that there is a fax stored.
Faxing 7.35
Download from Www.Somanuals.com. All Manuals Search And Download.
To print received documents:
1
2
3
Access the Secure Receive menu by following steps 1 and 2
on page 7.35.
Press the scroll button (
W
or
X) to display “Print” on the
bottom line and press Enter
.
Enter the four-digit passcode and press Enter
.
The machine prints all of the faxes stored in memory.
To turn Secure Receiving mode off:
1
2
3
Access the Secure Receive menu by following steps 1 and 2
on page 7.35.
Press the scroll button (
W
or
X) to display “Off” on the
bottom line and press Enter
.
Enter the four-digit passcode and press Enter
.
The mode is deactivated and the machine prints all faxes
stored in memory.
4
To return to Standby mode, press Stop/Clear.
Printing Reports
Your machine can print reports containing useful information.
The following reports are available:
Phonebook List
This list shows all of the numbers currently stored in the
machine’s memory as speed dial and group dial numbers.
You can print this Phonebook list using the Phone Book button:
see page 7.27.
Sent Fax Report
This report shows information on the faxes you have recently
sent.
7.36
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Received Fax Report
This report shows information on the faxes you have recently
received.
System Data List
This list shows the status of the user-selectable copy or fax
options. You may print this list to confirm your changes after
changing any settings.
Scheduled Job Information
This list shows the document(s) currently stored for Delayed
faxes or Toll Save faxes. The list shows the starting time(s) and
type(s) of operation(s).
Message Confirmation
elapsed time of the job, the communication mode, and the
communication results for a particular fax job.
7
You can set up your machine to automatically print a message
confirmation report after each fax job. See page 7.4.
Junk Fax Number List
This list shows up to 10 fax numbers specified as junk fax
numbers. To add or delete numbers to or from this list, access
the Junk Fax Setup menu: see page 7.39. When the Junk Fax
Barrier feature is turned on, incoming faxes from those numbers
are blocked.
This feature recognize the last 6 digits of the fax number set as
a remote fax machine’s ID.
Multi-communication Report
This report is printed automatically after sending documents
from more than one location.
Power Failure Report
This report is printed out automatically when power is restored
after a power failure, if any data loss occurs due to the power
failure.
NOTE: The lists you have set to print out automatically don’t print
out when there is no paper loaded or a paper jam has occurred.
Faxing 7.37
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a Report
1
Press Menu until “Report” appears on the top line of the
display.
2
Press the scroll button (
you want to print on the bottom line.
W
or
X) to display the report or list
• Phone Book: Phonebook list
• Sent Report: Sent fax report
• RCV Report: Received fax report
• System Data: System data list
• Scheduled Jobs: Scheduled job information
• MSG Confirm: Message confirmation
• Junk Fax List: Junk fax number list
3
Press Enter
.
The selected information prints out.
Using Advanced Fax Settings
Your machine has various user-selectable setting options for
sending or receiving faxes. These options are preset at the
factory, but you may need to change them. To find out how the
options are currently set, print the System Data list. For details
about printing the list, see above.
Changing Setting Options
1
Press Menu until “Advanced Fax” appears on the top line of
the display. The first available menu item, “Send Forward,”
displays on the bottom line.
2
3
Press the scroll button (
item you want on the bottom line and press Enter
W
or
X) until you see the menu
.
When the option you want appears on the display, choose a
status by pressing the scroll button (
value using the number keypad.
W
or
X) or enter a
4
Press Enter to save the selection.
7.38
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
5
You can exit from Setup mode at any time by pressing
Stop/Clear
.
Advanced Fax Setting Options
Option
Description
You can set the machine to send a copy of all outgoing faxes
to a specified destination, in addition to the fax numbers you
entered.
Send Forward
Select Off to turn this feature off.
Select On to turn this feature on. You can set the number of
the fax machine to which faxes are to be sent.
You can set your machine to forward incoming faxes to
another fax number during a specified time period. When a fax
arrives at your machine, it is stored in memory. Then, the
machine dials the fax number that you have specified and
sends the fax.
7
Select Off to turn this feature off.
RCV Forward
Select On to turn this feature on. You can set the fax number
to which faxes are forwarded. Then, you can enter the starting
time and date, and/or the ending time and date. The Local
Copy option allows you to set the machine to print the fax on
error.
You can set your machine to store your faxes in memory and
send them at a specified toll-saving time. For details about Toll
Save mode, see page 2.25.
Toll Save
Select Off to turn this feature off.
Select On to turn this feature on. You can set the starting time
and date, and/or the ending time and date for Toll Save mode.
Using the Junk Fax Barrier feature, the system will not accept
faxes sent from remote stations whose numbers are stored in
the memory as junk fax numbers. This feature is useful for
blocking any unwanted faxes.
Select Off to turn the feature off. Your machine accepts all
faxes.
Junk Fax Setup
Select On to turn the feature on. You can set up to 10 fax
numbers as junk fax numbers using the Set option. After
storing numbers, your machine will not accept faxes from the
registered stations. To delete all junk fax numbers, use the All
Delete option.
Faxing 7.39
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
You can keep your received faxes from being accessed by
unauthorized people.
Secure Receive
For further details about setting this mode, see page 7.35.
You can set a prefix dial number of up to five digits. This
number dials before any automatic dial number is started. It is
useful for accessing a PABX exchange.
Prefix Dial
This option allows the machine to automatically print the page
number, and the date and time of reception at the bottom of
each page of a received document.
Stamp RCV Name
Select Off to turn this feature off.
Select On to turn this feature on.
Error Correction Mode helps with poor line quality and makes
sure any faxes you send are sent smoothly to any other ECM-
equipped fax machine. If the line quality is poor, it takes more
time to send a fax when you are using ECM.
ECM Mode (Error
Correction Mode)
Select Off to turn this feature off.
Select On to turn this feature on.
7.40
Faxing
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing the Memory
You can selectively clear information stored in your machine’s
memory.
CAUTION: Before clearing the memory, make sure that all fax
jobs have been completed.
1
2
Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
Press the scroll button (
W
or
X) until you see “Clear
Settings” on the bottom line and press Enter
.
The first available menu item, “All Settings,” displays on
the bottom line.
3
Press the scroll button (
want to clear.
W
or
X) until you see the item you
• All Settings: Clears all of the data stored in the memory
and resets all of your settings to the factory default.
• Paper Setting: Restores all of the Paper Setting options to
the factory default.
• Copy Setup: Restores all of the Copy Setup options to the
factory default.
• Fax Setup: Restores all of the Fax Setup options to the
factory default.
• Fax Feature: Cancels all of the scheduled fax jobs in the
machine’s memory.
• Advanced Fax: Restores all of the Advanced Fax setting
options to the factory default.
• Sent Report: Clears all records of sent faxes.
• RCV Report: Clears all records of received faxes.
• Phone Book: Clears the one-touch, speed dial, and group
dial numbers stored in the memory.
4
5
Press Enter. The selected memory is cleared and the
display asks you to continue clearing the next item.
To clear another item, repeat steps 3 and 4.
OR
To return to Standby mode, press Stop/Clear
.
8.2
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning Your Machine
To maintain print quality, follow the cleaning procedures below
each time the toner cartridge is replaced or if print quality
problems occur.
CAUTIONS
:
• Cleaning the cabinet of the machine with cleaning materials
containing large amounts of alcohol, solvent, or other strong
substances can discolor or crack the cabinet.
• While cleaning the inside of the machine, be careful not to touch
the transfer roller, located underneath the toner cartridge. Oil
from your fingers can cause print quality problems.
Cleaning the Outside
Clean the cabinet of the machine with a soft lint-free cloth. You
can dampen the cloth slightly with water, but be careful not to
let any water drip onto or into the machine.
8
Cleaning the Inside
During the printing process, paper, toner, and dust particles can
accumulate inside the machine. This buildup can cause print
quality problems, such as toner specks or smearing. Cleaning
the inside of the machine clears or reduces these problems.
1
2
Turn the machine off and unplug the power cord. Wait for
the machine to cool down.
Open the front door and pull the toner cartridge out, lightly
pushing it down. Set it on a clean flat surface.
Maintenance 8.3
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
:
• To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of paper,
if necessary.
• Do not touch the green underside of the toner cartridge. Use the
handle on the cartridge to avoid touching this area.
3
With a dry lint-free cloth, wipe away any dust and spilled
toner from the toner cartridge area and the toner cartridge
cavity.
CAUTION: Do not touch the black transfer roller inside the
machine.
4
Locate the long strip of glass (LSU) inside the top of the
cartridge compartment, and gently swab the glass to see if
dirt turns the white cotton black.
5
6
Reinsert the toner cartridge and close the door.
Plug in the power cord and turn the machine on.
8.4
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Scan Unit
Keeping the scan unit clean helps ensure the best possible
copies. We suggest that you clean the scan unit at the start of
each day and during the day, as needed.
1
Slightly dampen a soft lint-free cloth or paper towel with
water.
2
3
Open the document cover.
Wipe the surface of the document glass and ADF glass until
it is clean and dry.
White sheet
Document cover
ADF glass
Document glass
8
4
5
Wipe the underside of the white document cover and white
sheet until it is clean and dry.
Close the document cover.
Maintenance 8.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining the Toner Cartridge
Toner cartridge storage
To get the most from the toner cartridge, keep the following
guidelines in mind:
• Do not remove the toner cartridge from its package until
ready for use.
• Do not refill the toner cartridge. The machine warranty
does not cover damage caused by using a refilled
cartridge.
• Store toner cartridges in the same environment as your
machine.
• To prevent damage to the toner cartridge, do not expose it to
Saving toner
To save toner, press the Toner Save button on the control
panel; see page 2.24. The button backlight turns on. Using this
feature extends the life of the toner cartridge and reduces your
cost per page, but it also reduces print quality.
Expected Cartridge Life
The life of the toner cartridge depends on the amount of toner
that print jobs require. When printing text at ISO 19752 5%
coverage, a new toner cartridge lasts an average of 3,500 or
5,000 pages. (The original toner cartridge supplied with the
machine lasts an average of 3,500 pages.) The actual number
may be different depending on the print density of the page you
print. If you print a lot of graphics, you may need to change the
cartridge more often.
8.6
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
Redistributing Toner
When the toner cartridge is near the end of its life, white streaks
or light printing occurs. The LCD displays the warning message,
“Toner Low.” You can temporarily reestablish print quality by
redistributing the remaining toner in the cartridge.
1
Open the front door.
2
Pull the toner cartridge out and gently shake the cartridge
5 or 6 times to distribute the toner evenly inside the
cartridge.
8
NOTE: If toner gets on your clothing, wipe it off with a dry cloth
and wash clothing in cold water. Hot water sets toner into fabric.
CAUTION: Do not touch the green underside of the toner
cartridge. Use the handle on the cartridge to avoid touching this
area.
3
Reinstall the cartridge and close the front door.
Maintenance 8.7
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Toner Cartridge
When the display on the control panel shows the warning
message, “[Toner Empty],” the machine stops printing. At this
stage, the toner cartridge needs to be replaced.
1
Open the front door.
2
Lightly pushing the used cartridge down, pull it out.
3
Unpack the new toner cartridge and gently shake it
horizontally 5 or 6 times to distribute the toner evenly
inside the cartridge.
Save the box and the plastic bag for shipping.
8.8
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: If toner gets on your clothing, wipe it off with a dry cloth
and wash clothing in cold water. Hot water sets toner into fabric.
CAUTION: Do not touch the green underside of the toner
cartridge. Use the handle on the cartridge to avoid touching this
area.
4
Hold the toner cartridge by the handle. Slowly insert the
cartridge into the opening in the machine. Tabs on the
sides of the cartridge and corresponding grooves within the
machine will guide the cartridge into the correct position
until it locks into place completely.
Groove
Tab
8
5
Close the front door.
Maintenance 8.9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Notify Toner Option
If you set the Notify Toner menu option to “On,” your machine
automatically sends a fax to your service company or the dealer
to notify them that your machine requires a new toner cartridge
when the toner cartridge needs to be replaced. The fax number
is preset by your dealer when you bought your machine.
If machine was purchased directly from XEROX, then there will
NOT be a preset fax number.
1
Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
The first available menu item, “Clean Drum,” displays on
the bottom line.
2
3
Press the scroll button (
the bottom line and press Enter
W
or
X) to display “Notify Toner” on
.
Press the scroll button (
W
or
X) to change the setting.
Select “On” to enable this feature. Selecting “Off” disables
this feature.
4
Press Enter to save the selection.
Cleaning the Drum
If there are streaks or spots on your print, the OPC drum of the
toner cartridge may require cleaning.
1
2
Before starting the cleaning procedure, make sure that
paper is loaded in the machine.
Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
The first available menu item, “Clean Drum,” displays on
the bottom line.
3
4
5
Press Enter.
The first available menu item,“Yes,” displays on the bottom
line.
Press Enter
.
The machine prints out a cleaning page. Toner particles on
the drum surface are affixed to the paper.
If the problem remains, repeat steps 1 through 4.
8.10
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
You can set your machine to clean the OPC drum automatically
every 500 print pages. You should use this feature if you use
inferior quality paper, because such paper may lower print
quality.
1
2
3
Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
Press the scroll button (
W
or
X) until “Auto Cleaning”
appears on the bottom line and press Enter
.
Press the scroll button (
display.
W
or
X) until “On” appears on the
NOTE: For users in Asian countries, this feature is preset to "On."
4
Press Enter.
The machine will print out an OPC cleaning page every 500
print pages.
8
Maintenance 8.11
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumables and Replacement
Parts
From time to time, you needs to replace the toner cartridge,
roller, and fuser unit to maintain top performance and to avoid
print quality problems and paper feed problems resulting from
worn parts.
The following items should be replaced after you have printed
the specified number of pages:
Items
ADF rubber pad
Yield (Average)
Approx. 20,000 feeds
Approx. 60,000 feeds
Approx. 80,000 feeds
Transfer roller
Fuser unit
To purchase consumables and replacement parts, contact your
Xerox dealer or the retailer where you bought your machine. We
strongly recommend that these items be installed by a trained
service professional, except for the toner cartridge (see
page 8.8) and the ADF rubber pad (see page 8.13).
8.12
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the ADF Rubber Pad
You can purchase an ADF rubber pad from your Xerox dealer or
the retailer where you bought your machine.
1
Open the ADF cover.
2
Rotate the bushing on the right end of the ADF roller
8
toward the ADF(c) and remove the roller from the
slot(d).
Maintenance 8.13
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Remove the ADF rubber pad from the ADF, as shown.
4
5
Insert a new ADF rubber pad into place.
Align the left end of the ADF roller with the slot and push
the right end of the ADF roller into the right slot (
Rotate the bushing on the right end of the roller toward the
document input tray ( ).
c).
d
6
Close the ADF cover
8.14
Maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Document Jams
When a document jams while passing through the ADF
(Automatic Document Feeder), “Document Jam” appears on the
display.
Input Misfeed
1
2
Remove any remaining page(s) from the ADF.
Open the ADF cover.
3
Rotate the bushing on the right end of the ADF roller
toward the ADF (
). Pull the document gently to the left and out of the
ADF.
c) and remove the roller from the slot
(
d
9.2
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Align the left end of the ADF roller with the slot and push
the right end of the ADF roller into the right slot ( ).
Rotate the bushing on the right end of the roller toward the
document input tray ( ).
c
d
5
Close the ADF cover. Then load the removed page(s), if
any, back into the ADF.
NOTE: To prevent document jams, use the document glass for
thick, thin, or mixed paper-type documents.
Exit Misfeed
9
1
2
Remove any remaining page(s) from the ADF.
Open the document cover and turn the release knob to
remove the misfed documents from the document output
tray.
3
Close the document cover. Then load the removed page(s),
if any, back into the ADF.
9.3
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Roller Misfeed
1
2
3
Remove any remaining page(s) from the ADF.
Open the document cover.
Turn the release knob so that you can easily seize the
misfed page, and remove the page from the roller or the
feed area by carefully pulling it to the right using both
hands.
4
Close the document cover. Then load the removed page(s),
if any, back into the ADF.
9.4
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Paper Jams
When a paper jam occurs, “Paper Jam” appears on the display.
Refer to the table below to locate and clear the paper jam.
Message
Location of Jam
Go to
[Paper Jam 0]
Open/Close Door
In the paper tray
(Tray 1 or Tray 2)
below and
page 9.7
[Paper Jam 1]
Open/Close Door
In the fuser area or
around the toner
cartridge.
page 9.8
[Paper Jam 2]
Check Inside
In the paper exit area
page 9.9
Bypass Jam
In the Bypass tray
page 9.11
To avoid tearing the paper, pull out the jammed paper gently
and slowly. Follow the instructions in the following sections to
clear the jam.
In Tray 1
9
1
Open and close the front door. The jammed paper
automatically exits the machine.
If the paper does not exit, continue to step 2.
Pull Tray 1 open.
2
9.5
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Remove the jammed paper by gently pulling it straight out.
If there is any resistance and the paper does not move
when you pull, or if you cannot see the paper in this area,
check the fuser area around the toner cartridge. See
page 9.8.
4
5
Insert the paper tray into the machine until it snaps into
place.
Open and close the front door to resume printing.
9.6
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
In Optional Tray 2
1
2
Pull the optional Tray 2 open.
Remove the jammed paper from the machine.
If there is any resistance and the paper does not move
when you pull, or if you cannot see the paper in this area,
go to step 3.
3
4
Pull the standard Tray 1 open.
Pull the paper straight up and out.
9
5
6
Insert Tray 1 into the machine until it snaps into place.
Open and close the front door to resume printing.
9.7
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Fuser Area or Around the Toner
Cartridge
NOTE: The fuser area is hot. Take care when removing paper from
the machine.
1
2
Remove paper from back by opening the back door cover
and pulling it out of the fuser.
Open the front door and pull the toner cartridge out, lightly
pushing it down.
3
Remove the jammed paper by gently pulling it straight out.
9.8
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Replace the toner cartridge and close the front door.
Printing automatically resumes.
In the Paper Exit Area
1
Open and close the front door. The jammed paper
automatically exits the machine.
If the paper does not exit, continue to step 2.
2
Gently pull the paper out of the front output tray. Skip to
step 6.
9
9.9
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
3
If there is any resistance and the paper does not move
when you pull, or if you cannot see the paper in the front
output tray, open the rear door.
4
Remove the jammed paper by gently pulling it straight out.
5
6
Close the rear door.
Open and close the front door to resume printing.
9.10
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Bypass Tray
“Bypass Jam” appears on the display when you try to print using
the Bypass tray and the machine does not detect paper. This
may be a lack of paper or improper paper loading.
If the paper is not feeding properly, pull the paper out of the
machine.
To resume printing, open and close the front door.
9
9.11
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
By selecting the correct paper types, most paper jams can be
avoided. When a paper jam occurs, follow the steps outlined in
“Clearing Paper Jams” on page 9.5.
• Follow the procedures in “Loading Paper” on page 2.7. Ensure
that the adjustable guides are positioned correctly.
• Do not overload the paper tray. Ensure that the paper is
below the paper capacity mark on the inside wall of the paper
tray.
• Do not remove paper from the tray while your machine is
printing.
• Flex, fan, and straighten the paper before loading.
• Do not use creased, damp, or highly curled paper.
• Do not mix paper types in the paper tray.
• Use only recommended print materials. See “Paper
Specifications” on page E.6.
• Ensure that the recommended print side of print materials is
facing down in the paper tray and facing up in the Bypass
tray.
• If paper jams occur frequently when you print on A5-sized
paper:
- Load the paper into the tray, as shown below.
- Set the page orientation to Landscape in the printer
properties window. See page 4.5.
9.12
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing LCD Error Messages
Display
Bypass Jam
Meaning
Suggested solutions
A paper jam has
occurred in the Bypass
tray.
Clear the jam. See page 9.11.
Or, load paper in the Bypass tray
correctly. See page 3.6.
Or, the machine detects
improper feeding from
the Bypass tray.
Cancel ?
1:Yes 2:No
Your machine’s memory
has become full while
trying to store a
To cancel the fax job, press the
button to accept “Yes.”
If you want to send the pages that
have been successfully stored,
1
document into memory.
press the
2
button to accept “No.”
You should send the remaining
pages later, when memory is
available.
[COMM. Error]
The machine has a
communication problem.
Ask the sender to try again.
Delayed
Function Full
The delayed fax jobs
queue is full.
Cancel unnecessary delayed fax
job.
Document Jam
The loaded document
has jammed in the ADF
(Automatic Document
Feeder).
Clear the document jam. See
page 9.2.
9
[Door Open]
Enter Again
The front door is not
securely latched.
Close the door until it locks into
place.
You entered an
unavailable item.
Enter the correct item again.
[Low Heat Error]
Open Heat Error
[Over Heat]
There is a problem in the
fuser unit.
Unplug the power cord and plug it
back in. If the problem persists,
please call for service.
Function
Impossible
You have tried to use a
combination of machine
functions that can not be
used at the same time.
Reduce the number of selected
functions or use only one function
at a time.
9.13
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Group Not
Meaning
Suggested solutions
You have tried to select a
group location number
where only a single
Use a speed dial number or dial a
number manually using the
number keypad.
Available
location number can be
used, such as when
adding locations for a
broadcast operation.
[Incompatible]
The remote machine did
not have the requested
feature, such as a
Reconfirm the remote machine’s
features.
delayed transmission.
This message also occurs
if the remote machine
does not have enough
memory space to
complete the operation
you are attempting.
[Jam 1]
[No Cartridge]
Paper has jammed in the
fuser area.
Or, the toner cartridge is
not installed.
Clear the jam. See page 9.8.
Or, install the toner cartridge. See
page 2.5.
[Line Busy]
[Line Error]
The receiving party did
not answer or the line is
already engaged.
Try again after a few minutes.
Your machine cannot
connect with the remote
machine or has lost
contact because of a
problem with the phone
line.
Try again. If the problem persists,
wait an hour or so for the line to
clear and try again.
Or, turn the ECM mode on. See
page 7.40.
Load Document
[LSU Error]
You have attempted to
set up a copy or fax
operation with no
document loaded into the
ADF.
Load a document into the ADF and
try again.
A problem has occurred
in the LSU (Laser
Scanning Unit).
Unplug the power cord and plug it
back in. If the problem persists,
please call for service.
9.14
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Meaning
Suggested solutions
Memory Dial Full
You have tried to add a
fax job to the memory
when 15 fax jobs have
already been saved and
the memory for saving
memory transmission is
full.
Wait until some of the job in
memory are sent.
Or delete low priority delayed
jobs.
Memory Full
[No Answer]
The memory is full.
Delete unnecessary documents
and retransmit after more
memory becomes available.
Alternatively, split the
transmission into more than one
operation.
The receiving fax
machine has not
answered after several
redial attempts.
Try again. Make sure that the
receiving machine is operational.
NO. Not
Assigned
The one-touch or speed
dial location you tried to
use has no number
assigned to it.
Dial the number manually using
the number keypad or assign the
number. For storing a number, see
“Automatic Dialing” on page 7.19.
NO. Not
Available
You have tried to delete
the number for a delayed
fax job.
Verify the number to be deleted
and try again.
Or, delete the number after the
delayed fax job has been sent.
9
[Non-Xerox]
[Cartridge]
You have used an
You must use a Xerox approved
cartridge.
unauthorized cartridge.
If you use non-xerox
cartridge, the machine
does not print.
[No Paper]
Add Paper
The paper in the paper
tray has run out.
Load paper in the paper tray. See
page 2.7.
Operation Not
Assigned
You are doing the Add/
Cancel operation, but
there are no jobs
waiting.
Check the display to see if there
are any scheduled jobs. The
Standby mode; for example,
Delay Fax.
[Paper Jam 0]
Open/Close Door
Paper has jammed in the
feeding area of the paper
tray.
Clear the jam. See page 9.5 and
page 9.7.
[Paper Jam 1]
Open/Close Door
Paper has jammed in the
fuser area.
Clear the jam. See page 9.8.
9.15
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Meaning
Suggested solutions
[Paper Jam 2]
Check Inside
Paper has jammed in the
paper exit area.
Clear the jam. See page 9.9.
[Power Failure]
Power has turned off
then on and the
machine’s memory has
not been saved.
The job which you were trying to
do before the power failure must
be completely re-done.
Priority Fax
Function Full
The priority fax jobs
queue is full.
Cancel unnecessary priority fax
jobs.
Retry Redial?
The machine is waiting
for a specified time
interval to redial a
You can press Enter to
immediately redial, or Stop/
Clear to cancel the redial
operation.
previously busy station.
[Stop Pressed]
[Toner Empty]
The Stop/Clear button
has been pressed during
a copy or fax operation.
Try again.
The toner cartridge has
run out. The machine
stops printing.
Replace the toner cartridge with a
new one. See page 8.8.
NOTE: A used cartridge will not
reset this message.
[Toner Low]
The toner is almost
empty.
Take out the toner cartridge and
gently shake it. By doing this, you
can temporarily reestablish
printing operations.
9.16
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Other Problems
The following chart lists some conditions that may occur and the recommended
solutions. Follow the suggested solutions until the problem is corrected. If the
problem persists, please call for service.
Paper Feeding Problems
Condition
Suggested solutions
Clear the paper jam. See page 9.5.
Paper is jammed
during printing.
Paper sticks together.
The paper tray can hold up to 250 sheets of paper,
depending on the thickness of your paper.
• Make sure that you are using the correct type of paper. See
“Paper Specifications” on page E.6.
• Remove paper from the paper tray and flex or fan the
paper.
• Humid conditions may cause some paper to stick together.
Multiple sheets of
paper do not feed.
• Different types of paper may be stacked in the paper tray.
Load paper of only one type, size, and weight.
• If multiple sheets have caused a paper jam, clear the paper
jam. See page 9.5.
Paper does not feed
into the machine.
• Remove any obstructions inside the machine.
• Paper has not been loaded correctly. Remove paper from
the tray and reload it correctly.
9
paper from the tray.
• The paper is too thick. Use only paper that meets the
specifications required by the machine. See “Paper
Specifications” on page E.6.
The paper keeps
jamming.
materials, use the Bypass tray.
• An incorrect type of paper is being used. Use only paper
that meets the specifications required by the machine. See
“Paper Specifications” on page E.6.
• There may be debris inside the machine. Open the front
door and remove the debris.
Transparencies stick
together in the paper
exit.
Use only transparencies specifically designed for laser
printers. Remove each transparency as it exits from the
machine.
9.17
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Envelopes skew or fail
to feed correctly.
Ensure that the paper guides are against both sides of the
envelopes.
Printing Problems
Condition
Possible cause
Suggested solutions
The machine
does not print.
The machine is not
receiving power.
Check the power cord connections. Check
the power switch and the power source.
The machine is not
selected as the default
printer.
Select Xerox WC PE120 Series PCL 6
as your default printer in your Windows.
Check the machine for
the following:
After locating the problem, clear it.
• The front door is not
closed.
• Paper is jammed.
• No paper is loaded.
• Clear the paper jam. See page 9.5.
• Load paper. See page 2.7.
• Install the toner cartridge. See
page 2.5.
• The toner cartridge
is not installed.
If a printer system error occurs, contact
your service representative.
The connection cable
between the computer
and the machine is not
connected properly.
Disconnect the printer cable and
reconnect it.
The connection cable
between the computer
and the machine is
defective.
If possible, attach the cable to another
computer that is working properly and
print a job. You can also try using a
different printer cable.
The port setting is
incorrect.
Check the Windows printer setting to
make sure that the print job is sent to the
correct port, for example, LPT1. If the
computer has more than one port, make
sure that the machine is attached to the
correct one.
The machine may be
configured incorrectly.
Check the printer properties to ensure
that all of the print settings are correct.
The printer driver may
be incorrectly
Remove the printer software and reinstall
it.
installed.
The machine is
malfunctioning.
Check the display message on the control
panel to see if the machine is indicating a
system error.
9.18
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Possible cause
Suggested solutions
The machine
selects print
materials from
the wrong
The paper source
selection in the printer
properties may be
incorrect.
For many software applications, the paper
source selection is found under the Paper
tab within the printer properties. Select
the correct paper source. See page 4.6.
paper source.
A print job is
extremely slow. complex.
The job may be very
Reduce the complexity of the page or try
adjusting the print quality settings.
The maximum print speed of your
machine is 22 PPM for Letter-sized paper
and 20 PPM for A4-sized paper.
If you are using
From the Start menu, choose Settings
and Printers. Right-click the Xerox WC
PE120 Series PCL 6 machine icon,
and then choose the Spool Settings
button. Select the desired spool setting.
Windows 98/Me, the
Spooling Setting may
be set incorrectly.
Half the page is
blank.
The page orientation
setting may be
incorrect.
Change the page orientation in your
application. See page 4.5.
The paper size and the
paper size settings do
not match.
Ensure that the paper size in the printer
driver settings matches the paper in the
tray.
Or, ensure that the paper size in the
printer driver settings matches the paper
selection in the software application
settings you use.
9
The machine
prints, but the
text is wrong,
garbled, or
The printer cable is
loose or defective.
Disconnect the printer cable and
reconnect. Try a print job that you have
already printed successfully. If possible,
attach the cable and the machine to
another computer and try a print job that
you know works. Finally, try a new printer
cable.
incomplete.
The wrong printer
driver was selected.
Check the application’s printer selection
menu to ensure that your machine is
selected.
The software
application is
malfunctioning.
Try printing a job from another
application.
The operating system
is malfunctioning.
Exit Windows and reboot the computer.
Turn the machine off and then back on
again.
9.19
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Possible cause
Suggested solutions
Pages print, but
are blank.
The toner cartridge is
defective or out of
toner.
Redistribute the toner, if necessary. See
page 8.7.
If necessary, replace the toner cartridge.
The file may have
blank pages.
Check the file to ensure that it does not
contain blank pages.
Some parts, such as
the controller or the
board, may be
Contact a service representative.
defective.
Theillustrations
printincorrectly
in Adobe
The setting in the
software application is
wrong.
Select Print Text as Bitmap in the
Graphic Options window of the Image
Options properties and print the
document again.
Illustrator.
An error occurs
repeatedly
when you are
printing with
the USB
When the USB Mode is
set to “Fast,” some PC
users may experience
poor USB
Change the USB Mode to “Slow.” To do so,
follow these steps:
1. Press Menu on the control panel until
“Machine Setup” appears on the top
line of the display.
communication.
connection.
2. Press the scroll button
“USB Mode” appears on the bottom line
and press Enter
(
W
or
X)
until
.
3. Press the scroll button
select “Slow.”
(
W
or
X)
to
4. Press Enter to save the selection.
5. Press Stop/Clear to return to Standby
Mode.
9.20
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Quality Problems
If the inside of the machine is dirty or paper has been loaded improperly, you may
notice a reduction in print quality. See the table below to clear the problem.
Condition
Suggested solutions
Light or faded print If a vertical white streak or faded area appears on the page:
• The toner supply is low. You may be able to temporarily
install a new toner cartridge.
• The paper may not meet paper specifications; for example,
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
• If the entire page is light, the print resolution setting is too
and page 2.24, respectively.
that the toner cartridge needs cleaning. See “Cleaning the
Drum” on page 8.10.
dirty. Clean the LSU (see page 8.4).
Toner specs
• The paper may not meet specifications; for example, the
paper is too moist or too rough. See “Paper Specifications”
on page E.6.
• The transfer roller may be dirty. Clean the inside of your
machine. See “Cleaning the Inside” on page 8.3.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
9
• The paper path may need cleaning. See “Cleaning the
Drum” on page 8.10.
Dropouts
If faded areas, generally rounded, occur randomly on the
page:
job.
• The moisture content of the paper is uneven or the paper
has moist spots on its surface. Try a different brand of
paper. See “Paper Specifications” on page E.6.
cause some areas to reject toner. Try a different kind or
brand of paper.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
• The toner cartridge may be defective. See “Vertical
repetitive defects” on page 9.23.
• If these steps do not correct the problem, contact a service
representative.
9.21
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Vertical lines
If black vertical streaks appear on the page:
• The drum inside the toner cartridge has probably been
one. See “Replacing the Toner Cartridge” on page 8.8.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
If white vertical streaks appear on the page:
dirty. Clean the LSU (see page 8.4).
The scan glass can be dirty:
• Clean glass with a dampended cloth. See “Cleaning the
Scan Unit” on page 8.5.
Gray background
If the amount of background shading becomes
unacceptable:
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
• Change to a lighter weight paper. See “Paper
Specifications” on page E.6.
or high humidity (higher than 80% RH) conditions can
• Remove the old toner cartridge and install a new one. See
Toner smear
• Clean the inside of the machine. See “Cleaning the Inside”
on page 8.3.
• Check the paper type and quality. See “Paper
Specifications” on page E.6.
• Remove the toner cartridge and install a new one. See
“Replacing the Toner Cartridge” on page 8.8.
• The fuser may be damaged. Contact a service
representative.
9.22
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Vertical repetitive
defects
even intervals:
• The toner cartridge may be damaged. If a repetitive mark
cleaning sheet several times to clean the cartridge; see
“Cleaning the Drum” on page 8.10. After the printout, if
you still have the same problems, remove the toner
cartridge and install a new one. See “Replacing the Toner
Cartridge” on page 8.8.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
• Parts of the machine may have toner on them. If the
defects occur on the back of the page, the problem will
likely correct itself after a few more pages.
• If a repetitive mark occurs on the page at intervals of
77.8 mm, the fuser may be damaged. Contact a service
representative.
• If a repetitive mark occurs on the page at intervals of 47.1
mm, the transfer roller may be damaged. Contact a service
representative.
Background scatter Background scatter results from bits of toner randomly
distributed on the printed page.
• The paper may be too damp. Try printing with a different
batch of paper. Do not open packages of paper until
necessary so that the paper does not absorb too much
moisture.
A
• If background scatter occurs on an envelope, change the
printing layout to avoid printing over areas that have
overlapping seams on the reverse side. Printing on seams
can cause problems.
• If background scatter covers the entire surface area of a
printed page, adjust the print resolution through your
software application or the printer properties.
9
Misformed
characters
• If characters are improperly formed and producing hollow
images, the paper stock may be too slick. Try a different
paper. See “Paper Specifications” on page E.6.
• If characters are improperly formed and producing a wavy
effect, the LSV may need service. For service, contact a
service representative.
9.23
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Page skew
Suggested solutions
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See “Paper
Specifications” on page E.6.
• Ensure that the paper or other material is loaded correctly
and the guides are not too tight or too loose against the
paper stack.
Curl or wave
• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high temperature
and humidity can cause paper curl. See “Paper
Specifications” on page E.6.
• Turn over the stack of paper in the paper tray. Also try
rotating the paper 180° in the tray.
• Try printing to the rear output slot.
Wrinkles or
creases
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See “Paper
Specifications” on page E.6.
• Turn over the stack of paper in the paper tray. Also try
rotating the paper 180° in the tray.
• Try printing to the rear output slot.
Back of printouts
are dirty
Check for leaking toner. Clean the inside of the machine. See
“Cleaning the Inside” on page 8.3.
Black pages
the cartridge and reinsert it.
• The toner cartridge may be defective and need replacing.
Remove the toner cartridge and install a new one. See
“Replacing the Toner Cartridge” on page 8.8.
• The machine may require repair. Contact a service
representative.
9.24
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Loose toner
• Clean the inside of the machine. See “Cleaning the Inside”
on page 8.3.
• Check the paper type and quality. See “Paper
Specifications” on page E.6.
• Remove the toner cartridge and install a new one. See
“Replacing the Toner Cartridge” on page 8.8.
• If the problem persists, the machine may require repair.
Contact a service representative.
• Fuser may be defective.
Character Voids
A
Character voids are white areas within parts of characters
that should be solid black:
• If you are using transparencies, try another type of
transparency. Because of the composition of
• You may be printing on the wrong surface of the paper.
Remove the paper and turn it around.
• The paper may not meet paper specifications. See “Paper
Specifications” on page E.6.
• Try a different paper type.
Horizontal stripes
If horizontally aligned black streaks or smears appear:
the cartridge and reinsert it.
• The toner cartridge may be defective. Remove the toner
cartridge and install a new one. See “Replacing the Toner
Cartridge” on page 8.8.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
9
• If the problem persists, the machine may require repair.
Contact a service representative.
Curl
If the printed paper is curled or paper does not feed into the
machine:
• Turn over the stack of paper in the input tray. Also try
rotating the paper 180° in the input tray.
• Try printing to the rear output slot.
9.25
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Problems
Condition
Suggested solutions
Copies are too light or too
dark.
Use the Lighten/Darken button to darken or
lighten the background of the copies.
Smears, lines, marks, or
spots appears on copies.
Darken button to lighten the background of your
copies.
• If no defects are on the original, clean the scan unit.
See page 8.5.
Copy image is skewed.
Blank copies print out.
• Ensure that the original is face down on the
document glass or face up in the ADF (Automatic
Document Feeder).
• Check that the copy paper is loaded correctly.
Ensure that the original is face down on the document
glass or face up in the ADF.
Image rubs off the copy
easily.
• Replace the paper in the paper tray with paper from
a new package.
• In high humidity areas, do not leave paper in the
machine for extended periods of time.
Frequent copy paper jams
occur.
• Fan the stack of paper, then turn it over in the paper
tray. Replace the paper in the tray with a fresh
supply. Check/adjust the paper guides, if necessary.
• Ensure that the paper is the proper paper weight.
75 g/m2 (20 lb) bond paper is recommended.
• Check for copy paper or pieces of copy paper
remaining in the machine after a paper jam has
been cleared.
Toner cartridge produces
fewer copies than expected
before running out of toner.
• Your originals may contain pictures, solids, or heavy
lines. For example, your originals may be forms,
newsletters, books, or other documents that use
more toner.
• The machine may be turned on and off frequently.
• The document cover may be left open while copies
are being made.
9.26
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning Problems
Condition
Suggested solutions
The scanner does not work but
the copy function is ok.
• Make sure that you place the document to be
scanned face down on the document glass, or
face up in the Automatic Document Feeder.
• There may not be enough available memory to
hold the document you want to scan. Try the
Prescan function to see if that works. Try
lowering the scan resolution rate.
• Check that the USB or parallel cable is
connected properly.
• Make sure that the USB or parallel cable is not
defective. Switch the cable with a known good
cable. If necessary, replace the cable.
• If you are using a parallel cable, ensure that it is
compliant with IEEE 1284 standards.
• Check that the scanner is configured correctly.
The unit scans very slowly.
• Check if the machine is printing received data.
If so, scan the document after the received data
has been printed.
• Graphics are scanned more slowly than text.
• Communication speed slows in scan mode
because of the large amount of memory
required to analyze and reproduce the scanned
image. Set your computer to the ECP printer
mode through BIOS setting. It will help to
increase the speed. For details about how to set
BIOS, refer to your computer User’s Guide.
9
9.27
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Message appears on your
computer screen:
• “Device can't be set to the H/W
mode you want.”
• “Port is being used by another
program.”
• “Port is Disabled.
• “Scanner is busy receiving or
printing data. When the current
job is completed, try again.”
• “Invalid handle.”
• “Scanning has failed.”
• There may be a copying or printing job in
progress. When that job is complete, try your
job again.
• The Selected port is currently being used.
Restart your computer and try again.
• The printer cable may be improperly connected
or the power may be off. You must use a parallel
cable that supports IEEE-1284 bi-directional
communications.
• The scanner driver is not installed or the
operating environment is not set up properly.
• Ensure that the machine is properly connected
and the power is on, Then restart your
computer.
• The USB cable may be improperly connected or
the power may be off.
• Do not use parallel and USB cables at the same
time.
Fax Problems
Condition
Suggested solutions
The machine is not
working, there is no
display and the buttons
are not working.
• Unplug the power cord and plug it in again.
• Ensure that there is power to the electrical outlet.
No dial tone sounds.
• Check that the phone line is connected properly.
• Check that the phone socket in the wall is working by
plugging in another phone.
The numbers stored in
memory do not dial
correctly.
Make sure that the numbers are stored in memory
correctly. Print a Phonebook list, referring to page 7.27.
The document does not
feed into the machine.
• Make sure that the document is not wrinkled and you
are putting it in correctly. Check that the document is
the right size, not too thick or thin.
• Make sure that the ADF (Automatic Document Feeder)
cover is firmly closed.
Faxes are not received
automatically.
• Fax mode should be selected.
• Make sure that there is paper in the tray.
• Check to see if the display shows “Memory Full.”
9.28
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
The machine does not
send.
• Make sure that the document is loaded in the ADF or
on the document glass.
• “Sending” should show up on the display.
• Check the fax machine you are sending to, to see if it
can receive your fax.
The incoming fax has
blank spaces or is of poor-
quality.
• A noisy phone line can cause line errors.
• Check your machine by making a copy.
• The toner cartridge may be empty. Replace the toner
cartridge, referring to page 8.8.
Some of the words on an
incoming fax are
stretched.
document jam.
There are lines on the
documents you send.
Check your scanning glass for marks and clean it. See
page 8.5.
The machine dials a
number, but a connection
with the other fax
machine fails.
• The other fax machine may be turned off, out of paper,
or cannot answer incoming calls. Speak with the other
machine operator and ask her/him to sort out the
problem.
• Try another known, working fax number.
Documents are not stored
in memory.
There may not be enough memory to store the
document. If the display shows a “Memory Full”
longer need and then try again to store the document.
9
Blank areas appear at the
bottom of each page or on
other pages, with a small
strip of text at the top.
You may have chosen the wrong paper settings in the
user option setting. For details about paper settings, see
page 2.21.
9.29
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Linux Problems
Problem
Possible Cause and Solution
The machine doesn’t
print
• Check if the printer driver is installed in your system. Open
MFP configurator and switch to the Printers tab in Printers
configuration window to look at the list of available
printers. Make sure that your machine is displayed on the
list. If not, please, invoke Add new printer wizard to set up
your device.
• Check if the printer is started. Open Printers configuration
and select your machine on the printers list. Look at the
description in the Selected printer pane. If its status
contains “(stopped)” string, please, press the Start
button. After that normal operation of the printer should be
restored. The "stopped" status might be activated when
some problems in printing occurred. For instance, this
could be an attempt to print document when MFP port is
claimed by a scanning application.
• Check if the MFP port is not busy. Since functional
components of MFP (printer and scanner) share the same
I/O interface (MFP port), the situation of simultaneous
access of different “consumer” application to the same MFP
port is possible. To avoid possible conflicts, only one of
them at a time is allowed to gain control over the device.
The other “consumer” will encounter “device busy”
response. You should open MFP ports configuration and
select the port assigned to your printer. In the Selected
port pane you can see if the port is occupied by some other
application. If this is the case, you should wait for
completion of the current job or should press Release port
button, if you are sure that the present owner is not
functioning properly.
Check if your application has special print option such as
“-oraw”. If “-oraw” is specified in the command line
parameter then remove it to print properly. For Gimp
front-end, select “print” -> “Setup printer” and edit
command line parameter in the command item.
The machine does not
appear on the scanners
list
• Check if your machine is attached to your computer. Make
sure that it is connected properly via the USB port and is
turned on.
• Check if the scanner driver for you machine is installed in
your system. Open MFP Configurator, switch to Scanners
configuration, then press Drivers. Make sure that driver
with a name corresponding to your machine's name is
listed in the window.
9.30
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible Cause and Solution
The machine does not
appear on the scanners
list (continued)
• Check if the MFP port is not busy. Since functional
components of MFP (printer and scanner) share the same
I/O interface (MFP port), the situation of simultaneous
access of different “consumer” application to the same MFP
port is possible. To avoid possible conflicts, only one of
them at a time is allowed to gain control over the device.
The other “consumer” will encounter “device busy”
response. This can usually happen while starting scan
procedure, and appropriate message box displays.
To identify the source of the problem, you should open MFP
ports configuration and select the port assigned to your
scanner. MFP port's symbol /dev/mfp0 corresponds to LP:0
designation displayed in the scanners’ options, /dev/mfp1
relates to LP:1 and so on. USB ports start at /dev/mfp4, so
scanner on USB:0 relates to /dev/mfp4 respectively and so
forth sequentially. In the Selected port pane you can see if
the port is occupied by some other application. If this is the
case, you should wait for completion of the current job or
should press Release port button, if you are sure that the
present port's owner is not functioning properly.
The machine doesn’t
scan
• Check if a document is loaded into the machine.
• Check if your machine is connected to the computer. Make
sure if it is connected properly if I/O error is reported while
scanning.
• Check if MFP port is not busy. Since functional components
of MFP (printer and scanner) share the same I/O interface
(MFP port), the situation of simultaneous access of
different “consumer” application to the same MFP port is
possible. To avoid possible conflicts, only one of them at a
time is allowed to gain control over the device. The other
“consumer” will encounter “device busy” response. This
can usually happen while starting scan procedure, and
appropriate message box will be displayed.
9
To identify the source of the problem, you should open MFP
ports configuration and select the port assigned to your
scanner. MFP port’s symbol /dev/mfp0 corresponds to LP:0
designation displayed in the scanners’ options, /dev/mfp1
relates to LP:1 and so on. USB ports start at /dev/mfp4, so
scanner on USB:0 relates to /dev/mfp4 respectively and so
forth sequentially. In the Selected port pane you can see if
the port is occupied by some other application. If this is the
case, you should wait for completion of the current job or
should press Release port button, if you are sure that the
present port’s owner is not functioning properly
.
9.31
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible Cause and Solution
I can’t print when I
installed both Linux
Print Package (LPP) and
MFP driver on the same
machine
• Since both Linux Printer Package and MFP driver make a
symbolic link to “lpr” printing command, which is
commonly used on Unix clones, it is not recommended to
use both package on the same machine.
• If you still want to use both packages simultaneously,
please install the LPP first.
simultaneously.
• If you want to uninstall only one of them, please uninstall
both packages and install that one you want to use again.
• If you don’t want to uninstall MFP driver and install it
again, you may make the necessary symbolic link yourself.
Please, log in as root user and invoke the following
command:
ln -sf /usr/local/bin/xerox/slpr /usr/bin/lpr
Can’t scan via Gimp
Front-end.
• Check if Gimp Front-end has “Xsane:Device dialog..” on the
“Acquire” menu. If not, you should install Xsane plug-in for
Gimp on the your computer. You can find Xsane plug-in
package for Gimp on Linux distribution CD or Gimp home
page. For the detail information, refer to the Help for Linux
distribution CD or Gimp Front-end application.
If you wish to use other kind of scan application, refer to the
Help for application.
I encounter error
“Cannot open MFP port
device file” when
Please avoid changing print job parameters (via SLPR utility,
for example) while a print job is in progress. Known versions
of CUPS server break the print job whenever print options
are changed and then try to restart the job from the
printing a document.
beginning. Since Linux MFP driver locks MFP port while
printing, the abrupt termination of the driver keeps the port
locked and therefore unavailable for subsequent print jobs. If
this situation occurred, please, try to release the MFP port.
9.32
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting PS Errors (WorkCentre PE120i Only)
The following situations are PS language specific and may occur when several printer
languages are being used.
NOTE: To receive a printed or screen-displayed message when PostScript errors occur,
open the Print Options window and click the desired selection next to the PostScript
errors section.
Problem
Possible Cause
Solution
PostScript file can
not be printed.
The PostScript driver
may not be installed
correctly.
• Install the PostScript driver,
referring to page B.2.
• Print a configuration page and verify
that the PS version is available for
printing.
• If the problem persists, contact a
service representative.
“This job contains
binary data...”
message appears.
The pure binary data
option is not supported
by the PostScript
driver.
Open the Properties of the PostScript
driver, click on PostScript, and click
on Advanced. The pure binary data
option is not supported. Choose
another option.
A PostScript error
page prints.
Print job may not be
PostScript.
Make sure that the print job is a
PostScript job. Check to see whether
the software application expected a
setup or PostScript header file to be
sent to the machine.
9
The optional Tray 2
is not selected in
the driver.
The printer driver has
not been configured to
recognize the optional
Tray 2.
Open the PostScript driver properties
and select the Device Settings tab
and set the Tray 2 option of the
Installable Options section to
Installed
.
When print a
document in
Macintosh with
Acrobat Reader 6.0
or higher, colors
print incorrectly.
The resolution setting
in the printer driver
may not be matched
with that in Acrobat
Reader.
Make sure that the resolution setting
in your printer driver matches that in
Acrobat Reader.
9.33
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Macintosh Problems (WorkCentre PE120i Only)
Problems in the Chooser
Problem
Possible Cause and Solution
Software is not installed correctly.
• The LaserWriter driver should be present as part of the
Macintosh OS. Make sure that the LaserWriter driver is in
the Extensions folder within the Systems folder. If not,
install the LaserWriter driver component from the
Macintosh OS CD.
The printer driver
icon does not appear
in Chooser.
• Make sure that you are using a high-quality cable.
• Make sure that the machine is on the correct network.
Select Network or AppleTalk Control Panel from
Control Panels in the Apple menu and then choose the
correct network.
The machine name
does not appear in
the Select a
PostScript Printer
box in the Chooser.
• Make sure that the cables are connected correctly and the
machine is turned on.
• Check if “Ready” appears on the display of the control
panel. If not, press the Stop/Clear button to switch your
machine to on-line.
• Make sure that the correct printer driver has been selected
in Chooser.
• If the machine resides on a network with multiple zones,
make sure that the correct zone is selected in the
AppleTalk Zones box in Chooser.
• Make sure that AppleTalk is on; the button next to Active
is selected in Chooser. You may need to restart the
computer to activate the change.
Printing Errors
Problem
Possible Cause and Solution
You cannot use the
computer while the
machine is printing.
Background Printing has not been selected.
• For LaserWriter 8.3, turn Background Printing on in the
Chooser. Status messages will now be redirected to the
Print Monitor allowing you to continue working while the
computer is processing data to be sent to the machine.
• For LaserWriter 8.4 or higher, turn Background Printing
on at the Print window.
9.34
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
USING USB FLASH DRIVE
10
your machine.
This chapter includes:
• About USB Flash Drives
• Managing the USB Flash Drive
• Printing From the USB Flash Drive
• Backing Up Data
Download from Www.Somanuals.com. All Manuals Search And Download.
About USB Flash Drives
USB flash drives are available with various memory capacities to
give you enough room to store documents, presentations,
downloaded music and videos, high resolution photographs, or
whatever other files you want to take with you.
Simply insert a USB flash drive into the USB port in the front of
your machine and your machine will automatically detect it as a
removable disk drive. Then you can do the following:
• Scan documents and save them on the USB flash drive.
• Print the data stored on the USB flash drive.
• Back up data, such as Phonebook entries and the system
settings of your machine.
• Restore backup files to the machine’s memory.
• Delete scanned images.
• Format the USB flash drive.
• Check the available memory space.
Installing a USB Flash Drive
There is a USB port in the front of your machine. This port is
designed for USB V1.1 and USB V2.0 flash drives.
CAUTIONS
:
• Do not remove the USB flash drive while the machine is in
operation. This may damage your machine.
• If your USB flash drive has certain features, such as security
settings and password settings, your machine may not
automatically detect it. For details about these features, see the
User’s Guide for your USB flash drive.
• You must use only an authorized USB flash driver whose
connector style is A Plug Type. Unauthorized USB flash drives
may not work with your machine.
Use only the metal/shielded USB flash
driver.
10.2
Using USB Flash Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
To install a USB flash drive, insert it into the USB port in the front
of your machine.
Once you have installed the USB flash drive, you can
immediately print files stored on it.
Scanning to USB Flash Drive
You can scan a document and save the scanned image on the
USB flash drive. There are two ways of doing this: you can scan
to the USB flash drive using the default settings, or you can
manually select your own settings.
Scan to USB supports:
10
• PDF (300 dpi Mono)
• TIFF (300 dpi Mono)
• JPEG (200 dpi Color)
• BMP (300 dpi Mono, 300 dpi Gray, 300 dpi Color)
Scanning With Default Settings
1
Load the document face up into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see page 7.6.
Using USB Flash Drive 10.3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Make sure that the USB flash drive is inserted into the USB
port in the front of the machine. If necessary, insert the
flash drive. See page 10.2.
Press Scan-to... on the control panel.
The first available menu item, “USB Memory,” appears on
the bottom line of the display.
4
Press Enter. The display shows the available memory space
for about 2 seconds and the first available menu item,
“Auto Scan,” appears on the bottom line of the display.
5
6
Press Enter to start scanning. The scanned image is saved
on the USB flash drive.
When a document is loaded on the document glass, the
display shows “Another Page?” on the top line after the
page has been scanned into memory. If you have another
page, remove the scanned page and place the next page on
the glass. Select “Yes” Repeat as necessary.
After all of the pages have been scanned, select “No” when
the display asks “Another Page?”
7
To return to Standby mode, press Stop/Clear.
Scanning With Your Own Settings
1
Load the document face up into the ADF.
OR
Place a single document face down on the document glass.
2
3
Make sure that the USB flash drive is inserted into the USB
port in the front of the machine. If necessary, insert the
flash drive. See page 10.2.
Press Scan-to... on the control panel.
The first available menu item, “USB Memory,” appears on
the bottom line of the display.
10.4
Using USB Flash Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press Enter. The display shows the available memory space
for about 2 seconds and the first available menu item,
“Auto Scan,” appears on the bottom line of the display.
5
6
7
Press the scroll button (
appears on the bottom line of the display. Press Enter
W
or
X) until “Manual Scan”
.
Press the scroll button (
W
or
X) and select the size of the
image to be scanned. Press Enter
.
Press the scroll button (
W
or
X) and select the file format in
which the document is to be scanned.
8
9
Press Enter
.
If you selected “BMP” in step 7, you are asked to select a
color format, Color, Gray, or Mono, by pressing the scroll
button (
W
or
X).
If you selected “TIFF” or “PDF” in step 7, you can save a
multiple-page document as a single file. After you select
“TIFF” or “PDF”, the machine displays “Multi-Page Scan”
and offers you the choice of “On” or “Off.” If you select “On”
you can save multiple pages as a single file, but this feature
is only activated when you load your document into the
ADF. The ADF can handle documents of up to 50 pages at a
time.
10 Press Enter to start scanning. The scanned image is saved
on the USB flash drive.
10
11 When a document is loaded on the document glass, the
display shows “Another Page?” on the top line after the
document has been scanned into memory. If you have
another page, remove the scanned page and load the next
page on the glass. Select “Yes” Repeat as necessary.
After all of the pages have been scanned, select “No” when
the display asks “Another Page?”
12 To return to Standby mode, press Stop/Clear.
Using USB Flash Drive 10.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing the USB Flash Drive
Changing the Default Settings
When you scan a document to the USB flash drive, the default
scan options, including scan size and scan format, can be set to
available when you scan to the USB flash drive.
1
Make sure that the USB flash drive is inserted into the USB
port in the front of the machine. If necessary, insert the
USB flash drive. See page 10.2.
2
Press Scan-to... on the control panel.
The first available menu, item “USB Memory,” appears on
the bottom line of the display.
3
Press Enter. The display shows the available memory space
for about 2 seconds and the first available menu item,
“Auto Scan,” appears on the bottom line of the display.
4
5
Press the scroll button (
on the bottom line of the display.
W
or
X) until “Scan Setup” appears
Press Enter
.
The first available menu item, “Scan Size,” appears on the
bottom line.
6
7
Press Enter
.
Press the scroll button (
image to be scanned.
W
or
X) and select the size of the
8
9
Press Enter to make your selection.
Press the
X
button to scroll to “Scan File Type” and press
Enter to access the menu.
10 Press the scroll button (W or
X) and select the file format in
which the document is to be scanned. You can select BMP,
TIFF, PDF, or JPEG.
11 Press Enter.
10.6
Using USB Flash Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
12 If you selected “BMP” in step 10, you are asked to select a
color format, Color, Gray, or Mono, by pressing the scroll
button (
W
or
X).
If you selected “TIFF” or “PDF” in step 10, you can save a
multiple-page document as a single file. After you select
“TIFF” or “PDF”, the machine displays “Multi-Page Scan”
and offers you the choice of “On” or “Off.” If you select “On”
you can save multiple pages as a single file, but this feature
is only activated when you load your document into the
ADF. The ADF can handle documents of up to 50 pages at a
time.
13 Press Enter to make your selection.
14 To return to Standby mode, press Stop/Clear.
Deleting an Image File
flash drive:
1
Make sure that the USB flash drive is inserted into the USB
port in front of the machine. If necessary, insert the USB
flash drive. See page 10.2.
2
Press Scan-to... on the control panel.
The first available menu item, “USB Memory,” appears on
the bottom line of the display.
10
3
4
Press Enter. The display shows the available memory space
for about 2 seconds and the first available menu item,
“Auto Scan,” appears on the bottom line of the display.
Press the scroll button (
W
or
X) until you see “File Manage”
on the bottom line and press Enter
.
The first available menu item, “Delete,” appears on the
bottom line of the display.
5
6
Press Enter
.
Press the scroll button (
file you want and press Enter
W
or
X) until you find the folder or
.
If you see “D” in the front of a folder name, there are one
or more folders in the selected folder.
Using USB Flash Drive 10.7
Download from Www.Somanuals.com. All Manuals Search And Download.
7
If you selected a file in step 6, and the display shows the
size of the file for about 2 seconds. Go to the next step.
If you selected a folder, the first file contained in that folder
appears on the bottom line of the display. You can view the
other files in the folder by pressing the scroll button (
). When you find the file you want to delete, press Enter
The display shows the size of the file for about 2 seconds.
W
or
X
.
8
9
When the display asks you to confirm your selection, select
“Yes” to delete the folder or file.
To cancel your selection, select “No” by pressing the scroll
button (
W
or
X).
After deleting, the display asks if you want to delete
another folder or file. Select “Yes” to delete more items,
and repeat from step 6.
Otherwise, select “No” by pressing the scroll button
(
W
or
X).
Formatting the USB Flash Drive
1
Make sure that the USB flash drive is inserted into the USB
port in the front of the machine. If necessary, insert the
USB flash drive. See page 10.2.
2
Press Scan-to... on the control panel.
The first available menu item, “USB Memory,” appears on
the bottom line of the display.
3
Press Enter. The display shows the available memory space
for about 2 seconds and the first available menu item,
“Auto Scan,” appears on the bottom line of the display.
4
5
6
Press the scroll button (
on the bottom line and press Enter
W
or
X) until you see “File Manage”
.
Press the scroll button (
the bottom line and press Enter
W
or
X) until you see “Format” on
.
When the display asks you to confirm your selection, select
“Yes” to format the USB flash drive.
To cancel your selection, select “No” by pressing the scroll
button (
W
or
X).
10.8
Using USB Flash Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the USB Memory Status
scanning and saving documents.
1
Make sure that the USB flash drive is inserted into the USB
port in the front of the machine. If necessary, insert the
USB flash drive. See page 10.2.
2
Press Scan-to... on the control panel.
The first available menu item, “USB Memory,” appears on
the bottom line of the display.
3
Press Enter. The display shows the available memory space
for about 2 seconds and the first available menu item,
“Auto Scan,” appears on the bottom line of the display.
4
5
Press the scroll button (
Space” on the bottom line and press Enter
W
or
X) until you see “Check
.
The available memory space appears on the display.
To return to the Standby mode, press Stop/Clear
.
10
Using USB Flash Drive 10.9
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing From the USB Flash Drive
You can directly print files stored on the USB flash drive. You can
print TIFF, BMP, TXT, and PRN files.
Direct Print option supports:
• PRN : PCL6(Version 2.1) Compatible
• TXT : PCL5e Compatible
• TIFF : MFP generated TIF files are supported with Direct
Print.
• BMP : B/W, 72 ~ 300DPI, NO COMPRESSION
PRN files can be created by selecting Print when your file is
open, selecting your machine in the Name section of the Print
window, and then selecting the Print to File check box. Save
created in this fashion can be printed directly from the USB flash
drive to the machine.
1
Insert the USB flash drive into the USB port in the front of
your machine. For details, see page 10.2.
You can also press Print from USB Drive without installing
the USB flash drive.
Your machine automatically detects the USB flash drive and
reads data stored on it.
2
3
Press the scroll button (
you want to print and press Enter
W
or
X) to select the folder or file
.
If you see “D” in the front of a folder name, there are one
or more folders in the selected folder.
If you selected a file in step 2, go to the next step.
If you selected a folder in step 2, the first file name in the
folder appears on the bottom line of the display. You can
also view the other files in the folder by pressing the scroll
button (
W
or
X). When you find the file that you want to
print, go to step 4.
10.10
Using USB Flash Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
4
To print the selected file, press Enter
USB Drive to print the file.
,
Start, or Print from
If you selected a TIFF, BMP, or TXT file in step 2, you can
select the number of copies to be printed by pressing the
scroll button (
W
or
X) or entering the number using the
numeric keys. Then press Enter to print the file.
5
6
After printing the file, the display asks if you want to print
another job. Select “Yes” to print anther jobs, and repeat
from step 2. Otherwise, select “No”.
To return to Standby mode, press Stop/Clear
.
Backing Up Data
Your data in the machine’s memory are accidentally erased due
to power failure or storage failure. Backup helps you protect
your Phonebook entries and the system settings by storing them
as backup files on the USB flash drive.
To back up the data:
1
2
Insert the USB flash drive. For details, see page 10.2.
10
Press Menu until “Machine Setup” appears on the top line
of the display.
3
4
Press the scroll button (
Setting” on the bottom line and press Enter
W
or
X) until you see “Export
.
If you want to back up the Phonebook entries, when
“Phonebook” appears on the bottom line, press Enter
.
If you want to back up the system settings of the machine,
select “All Settings” by pressing the scroll button (
W
or
X)
and press Enter
.
5
The data is backed up in the USB flash drive.
If the file name is already stored on the USB flash drive,
you are asked to overwrite it. Select “Yes” to overwrite the
data.
Using USB Flash Drive 10.11
Download from Www.Somanuals.com. All Manuals Search And Download.
Otherwise, select “No” by pressing the scroll button
or ).
(
W
X
6
To return to Standby mode, press Stop/Clear.
To restore the data:
1
2
Insert the USB flash drive. For details, see page 10.2.
Press Menu until “Machine Setup” appears on the top line
of the display.
3
4
5
Press the scroll button (
Setting” on the bottom line and press Enter
W
or
X) until you see “Import
.
Select the data type you want to restore, either
“Phonebook” or “All Settings” and press Enter
.
Select the file you want to restore and press Enter
.
The first available menu item, “Yes,” appears on the bottom
line.
6
7
Press Enter to restore the backup file to the machine.
To return to Standby mode, press Stop/Clear
.
10.12
Using USB Flash Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR MACHINE IN
LINUX
A
You can use your machine in a Linux environment.
This chapter includes:
• Getting Started
• Installing the MFP Driver
• Using the MFP Configurator
• Configuring Printer Properties
• Printing a Document
• Scanning a Document
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
The supplied CD-ROM provides you with Xerox’s MFP driver
package for using your machine with a Linux computer.
Xerox’s MFP driver package contains printer and scanner
drivers, providing the ability to print documents and scan
images. The package also delivers powerful applications for
configuring your machine and further processing of the scanned
documents.
After the driver is installed on your Linux system, the driver
package allows you to monitor a number of MFP devices via fast
ECP parallel ports and USB simultaneously. The acquired
documents can then be edited, printed on the same local MFP or
network printers, sent by e-mail, uploaded to an FTP site, or
transferred to an external OCR system.
The MFP driver package is supplied with a smart and flexible
installation program. You don't need to search for additional
components that might be necessary for the MFP software: all
required packages will be carried onto your system and installed
automatically; this is possible on a wide set of the most popular
Linux clones.
A.2
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the MFP Driver
System Requirements
Supported OS
• Redhat 7.1 and above
• Linux Mandrake 8.0 and above
• SuSE 7.1 and above
• Caldera OpenLinux 3.1 and above
• Turbo Linux 7.0 and above
• Slackware 8.1 and above
Recommended Hardware Requirements
• Pentium IV 1 GHz or higher
• RAM 256 MB or higher
• HDD 1 GB or higher
NOTES
:
• It’s also necessary to claim swap partition of 300 MB or larger for
working with large scanned images.
• The Linux scanner driver supports the optical resolution at
maximum. see “Scanner and Copier Specifications” on page E.3.
Software
• Linux Kernel 2.4 or higher
• Glibc 2.2 or higher
• CUPS
A
• SANE
A.3
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the MFP Driver
1
2
Make sure that you connect your machine to your
computer. Turn both the computer and the machine on.
When the Administrator Login window appears, type in
root in the Login field and enter the system password.
NOTE: You must log in as a super user (root) to install the printer
software. If you are not a super user, ask your system
administrator.
3
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
If the CD-ROM does not automatically run, click the
icon at the bottom of the desktop. When the Terminal
screen appears, type in:
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./install.sh
NOTE: The installation program runs automatically if you have an
autorun software package installed and configured.
4
Click Install.
A.4
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
5
When the welcome screen appears, click Next.
6
When the installation is complete, click Finish.
The installation program has added the MFP Configurator
desktop icon and Xerox MFP group to the system menu for
your convenience. If you have any difficulties, consult the
onscreen help that is available through your system menu
or can otherwise be called from the driver package
windows applications, such as MFP Configurator or Image
Editor.
A
A.5
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Uninstalling the MFP Driver
1
When the Administrator Login window appears, type in
root in the Login field and enter the system password.
NOTE: You must log in as a super user (root) to install the printer
software. If you are not a super user, ask your system
administrator.
2
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
If the CD-ROM does not automatically run, click the
icon at the bottom of the desktop. When the Terminal
screen appears, type in:
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./install.sh
NOTE: The installation program runs automatically if you have an
autorun software package installed and configured.
1
2
Click Uninstall
.
Click Next
.
3
Click Finish.
A.6
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the MFP Configurator
MFP Configurator is a tool primarily intended for configuring MFP
devices. Since an MFP device combines the printer and scanner,
printer and scanner functions. There is also a special MFP port
option responsible for the regulation of access to an MFP printer
and scanner via a single I/O channel.
After installing the MFP driver (see page A.3), the MFP
Configurator icon will automatically be created on your desktop.
Opening the MFP Configurator
1
Double-click MFP Configurator on the desktop.
You can also click the Startup Menu icon and select Xerox
MFP and then MFP Configurator
.
2
Press each button on the Modules pane to switch to the
corresponding configuration window.
Printers Configuration button
Scanners Configuration button
MFP Ports Configuration button
A
You can use the onscreen help by clicking Help
.
3
After changing the configurations, click Exit to close the
MFP Configurator.
A.7
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Printers Configuration
Printers configuration has the two tabs; Printers and Classes
.
Printers Tab
You can see the current system’s printer configuration by
clicking on the printer icon button on the left side of the MFP
Configurator window.
Switches to Printer
configuration.
Shows all of the
installed printer.
Printer control
buttons. See
below.
Shows the status,
model name and
URI of your printer.
You can use the following printer control buttons:
•
•
•
•
•
•
Refresh: renews the available printers list.
Add Printer: allows you to add a new printer.
Remove Printer: removes the selected printer.
Set as Default: sets the current printer as a default printer.
/
Test: allows you to print a test page to check if the machine
is working properly.
•
Properties: allows you to view and change the printer
properties. For details, see page A.11.
A.8
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Classes Tab
The Classes tab shows a list of available printer classes.
Renews the classes list.
Allows you to add a new
printer class.
Shows all of the
printer classes.
Removes the selected
printer class.
Shows the status of the
class and the number of
printers in the class.
Scanners Configuration
In this window, you can monitor the activity of scanner devices,
view a list of installed Xerox MFP devices, change device
properties, and scan images.
Allows you to change the
scan properties and scan a
document. See page A.14.
Switches to
Scanners
configuration.
Allows you to monitor the
Shows all of the
activity of the scan
installed scanners.
drivers.
A
Shows the vendor,
model name and type of
your scanner.
A.9
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
MFP Ports Configuration
In this window, you can view the list of available MFP ports,
check the status of each port and release a port that is stalled
in busy state when its owner is terminated for any reason.
Renews the available
ports list.
Releases the selected
port.
Switches to
MPF ports
configuration.
Shows all of the
available ports.
Shows the port type,
device connected to
the port and status
Sharing Ports Between Printers and Scanners
Your machine may be connected to a host computer via the
parallel port or USB port. Since the MFP device contains more
than one device (printer and scanner), it is necessary to
organize proper access of “consumer” applications to these
devices via the single I/O port.
The Xerox MFP driver package provides an appropriate port
sharing mechanism that is used by Xerox printer and scanner
drivers. The drivers address their devices via so-called MFP
ports. The current status of any MFP port can be viewed via the
MFP Ports Configuration. The port sharing prevents you from
accessing one functional block of the MFP device, while another
block is in use.
When you install a new MFP printer onto your system, it is
strongly recommended you do this with the assistance of an MFP
Configurator. In this case you will be asked to choose I/O port
for the new device. This choice will provide the most suitable
configuration for MFP’s functionality. For MFP scanners I/O ports
are being chosen by scanner drivers automatically, so proper
settings are applied by default.
A.10
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Printer Properties
Using the properties window provided by the Printers
configuration, you can change the various properties for your
machine as a printer.
1
Open the MFP Configurator.
If necessary, switch to Printers configuration.
2
3
Select your machine on the available printers list and click
Properties
.
The Printer Properties window opens.
The following five tabs display at the top of the window:
•
General: allows you to change the printer location and
name. The name entered in this tab displays on the
printer list in Printers configuration.
•
Connection: allows you to view or select another port. If
you change the printer port from USB to parallel or vice
versa while in use, you must re-configure the printer port
in this tab.
A
•
•
•
Driver: allows you to view or select another printer
driver. By clicking Options, you can set the default
device options.
Jobs: shows the list of print jobs. Click Cancel job to
cancel the selected job and select the Show completed
jobs check box to see previous jobs on the job list.
Classes: shows the class that your printer is in. Click
Add to Class to add your printer to a specific class or
click Remove from Class to remove the printer from the
selected class.
4
Click OK to apply the changes and close the Printer
Properties Window.
A.11
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a Document
Printing from Applications
There are a lot of Linux applications that you are allowed to print
from using Common UNIX Printing System (CUPS). You can
print on your machine from any such application.
1
From the application you are using, select Print from the
File menu.
2
3
Select Print directly using lpr
.
In the Xerox LPR window, select the model name of your
machine from the Printer list and click Properties
.
Click.
4
Change the printer and print job properties.
A.12
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
The following four tabs display at the top of the window.
•
General - allows you to change the paper size, the paper
type, and the orientation of the documents, enables the
duplex feature, adds start and end banners, and changes
the number of pages per sheet.
•
•
Text - allows you to specify the page margins and set the
text options, such as spacing or columns.
Graphics - allows you to set image options that are used
when printing images/files, such as color options, image
size, or image position.
•
Device: allows you to set the print resolution, paper
source, and destination.
5
Click OK to apply the changes and close the Xerox WC
PE120 Series Properties window.
6
7
Click OK in the Xerox LPR window to start printing.
The Printing window appears, allowing you to monitor the
status of your print job.
To abort the current job, click Cancel
.
Printing Files
You can print many different types of files on the Xerox MFP
device using the standard CUPS way - directly from the
command line interface. The CUPS lpr utility allows you do that.
But the drivers package replaces the standard lpr tool by a much
more user-friendly Xerox LPR program.
To print any document file:
A
1
Type lpr <file_name> from the Linux shell command line
and press Enter. The Xerox LPR window appears.
When you type only lpr and press Enter, the Select file(s)
to print window appears first. Just select any files you want
to print and click Open
.
2
3
In the Xerox LPR window, select your printer from the list,
and change the printer and print job properties.
For details about the properties window, see page A.12.
Click OK to start printing.
A.13
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning a Document
You can scan a document using the MFP Configurator window.
1
2
3
Double-click the MFP Configurator on your desktop.
Click the
button to switch to Scanners Configuration.
Select the scanner on the list.
Click your
scanner.
When you have only one MFP device and it is connected to
the computer and turned on, your scanner appears on the
list and is automatically selected.
If you have two or more scanners attached to your
computer, you can select any scanner to work at any time.
For example, while acquisition is in progress on the first
scanner, you may select the second scanner, set the device
options and start the image acquisition simultaneously.
NOTE: The scanner name shown in Scanners configuration can be
different from the device name.
4
Click Properties.
A.14
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
(Automatic Document Feeder) or face down on the
document glass. For details, see page 7.6.
For detailed guidelines for preparing an original document,
see page 5.3.
Click Preview in the Scanner Properties window.
The document is scanned and the image preview appears
in the Preview Pane.
Drag the pointer to
set the image area
to be scanned.
7
Change the scan options in the Image Quality and Scan
Area sections.
•
Image Quality: allows you to select the color
composition and the scan resolution for the image.
•
Scan Area: allows you to select the page size. The
manually.
A
If you want to use one of the preset scan option settings,
select from the Job Type drop-down list. For details about
the preset Job Type settings, see page A.16.
You can restore the default setting for the scan options by
clicking Default
.
8
When you have finished, click Scan to start scanning.
The status bar appears on the bottom left of the window to
show you the progress of the scan. To cancel scanning,
click Cancel
.
A.15
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
9
The scanned image appears in the new Image Editor
window.
If you want to edit the scanned image, use the toolbar. For
further details about editing an image, see page A.17.
10 When you are finished, click Save on the toolbar.
11 Select the file directory where you want to save the image
and enter the file name.
12 Click Save.
Adding Job Type Settings
You can save your scan option settings to retrieve for a later
scanning.
To save a new Job Type setting:
1
2
3
4
Change the options from the Scanner Properties window.
Click Save As
Enter the name for your setting.
Click OK
Your setting is added to the Saved Settings drop-down list.
.
.
A.16
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
To save a Job Type setting for the next scan job:
1
2
Select the setting you want to use from the Job Type drop-
down list.
Click Save
.
The next time you open the Scanner Properties window,
the saved setting is automatically selected for the scan job.
To delete a Job Type setting:
1
2
Select the setting you want to delete from the Job Type
drop-down list.
Click Delete
.
The setting is deleted from the list
Using the Image Editor
The Image Editor window provides you with menu commands
and tools to edit your scanned image.
Use these tools to
edit the image.
A
You can use the following tools to edit the image:
Tools
Function
Saves the image.
A.17
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Tools
Function
Cancels your last action.
Restores the action you canceled.
Allows you to scroll through the image.
Crops the selected image area.
Zooms the image out.
Zooms the image in.
Allows you to scale the image size; you can enter
the size manually, or set the rate to scale
proportionally, vertically, or horizontally.
Allows you to rotate the image; you can select the
number of degrees from the drop-down list.
Allows you to flip the image vertically or
horizontally.
Allows you to adjust the brightness or contrast of
the image, or to invert the image.
Shows the properties of the image.
For further details about the Image Editor program, refer to the
onscreen help.
A.18
Using Your Machine In Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
USING WINDOWS
POSTSCRIPT DRIVER
(WorkCentre PE120i Only)
B
If you want to use the PostScript driver provided with
your machine to print a document, use the information
WorkCentre PE120i.
This chapter includes:
• Installing PostScript Drivers
• Using PostScript Printer Driver Features
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing PostScript Drivers
PPDs, in combination with the PostScript driver, access printer
features and allow the computer to communicate with the
printer. An installation programme for the PPDs is provided on
the supplied PS Driver CD.
properly connected with parallel, USB, or network interface. For
information about:
• connecting with a parallel interface, see page 2.13.
• connecting with a USB interface, see page 2.12.
• connecting with a network interface, see page 2.14.
Installing PostScript Drivers
NOTES
:
• It is recommended to install the Xerox drivers CD before
installing the PS Driver CD. This will enable the scan driver and
eliminate the “New Hardware Found” wizard.
• Make sure that your machine is turned on and connected to your
computer’s parallel port or USB port before installing
software. Windows NT 4.0 does not support the USB
connection.
Installing PostScript Drivers
1
Insert the supplied PS Driver CD into your CD-ROM drive.
Click Start and then Run. Type E: Xinstall.exe, replacing
"E" with the letter of your CD-ROM drive and click OK.
B.2
USING WINDOWS POSTSCRIPT DRIVER (WorkCentre PE120i Only)
Download from Www.Somanuals.com. All Manuals Search And Download.
2
When the language selection window appears, select the
appropriate language and then click Continue
.
3
Choose the components you want to install and then click
Continue
.
4
5
Click Continue
.
Click Finish. The driver installation is now complete.
B
USING WINDOWS POSTSCRIPT DRIVER (WorkCentre PE120i Only) B.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using PostScript Printer Driver
Features
The machine automatically switches between PostScript and PCL
printer languages, depending on the driver you have selected.
Accessing Printer Properties
The properties window for the Windows PostScript printer driver
can be opened from the Printers folder or from an application.
To open the properties window from the Printers folder:
1
2
Click the Windows Start button.
For Windows 98/Me/NT 4.0/2000, select Settings and then
Printers to open the Printers window.
For Windows XP, select Printers and Faxes
.
3
4
Select Xerox WC PE120 Series PS
.
Click the right mouse button on the printer icon and:
• In Windows 98/Me, select Properties
• In Windows 2000/XP, select Printing Preferences
• In Windows NT 4.0, select Document Default
.
.
.
To open the properties window from an application:
1
2
From the File menu, select Print to open the Print window.
Make sure that Xerox WC PE120 Series PS is selected on
the Name drop-down list.
3
Click Properties or Preferences in the application’s Print
window to open the properties window.
B.4
USING WINDOWS POSTSCRIPT DRIVER (WorkCentre PE120i Only)
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Settings
The printer properties window may differ, depending on your
operating system. This chapter shows the Printing Preferences
window displayed on Windows XP.
Your printer’s Printing Preferences window consists of 2 tabs:
Layout and Paper/Quality
.
If you access printer properties through the Printers folder, you
can view additional Windows-based tabs; refer to your Windows
User’s Guide.
Layout tab
The Layout tab provides options to adjust how the document
appears on the printed page. See page B.4 for more information
on accessing printer properties.
1
2
3
4
Property
Description
Orientation allows you to select the
direction in which information is printed
on a page.
1
Orientation
B
•
Portrait prints across the width of
the page, letter style.
•
Landscape prints across the length
of the page, spreadsheet style.
If you want to turn the page upside
down, select Rotated Landscape
.
USING WINDOWS POSTSCRIPT DRIVER (WorkCentre PE120i Only) B.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Property
Description
Page Order: You can set the sequence
for the pages to print.
2
Page Order
•
Front to Back: Your machine prints
all pages from the first page to the
last page.
•
Back to Front: Your machine prints
all pages from the last page to the
first page.
Pages Per Sheet allows you to select
the number of pages you want to print
per sheet (1, 2, 4, 6, 9, or 16) on the
drop-down list.
3
4
Pages Per
Sheet
You can use advanced settings by
clicking the Advanced button. For
details about these options, see
Chapter 4,“Printing Tasks”.
Advanced...
•
•
•
Paper/Output:This option allows
you to select the size of the paper
loaded in the tray.
Graphic: This option allows you to
adjust the print quality for your
specific printing needs.
Document Options: This options
allow you to set the PostScript
options or printer features, such as
the toner save mode and image
mode.
B.6
USING WINDOWS POSTSCRIPT DRIVER (WorkCentre PE120i Only)
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper/Quality tab
The Paper/Quality tab allows you to select the paper tray you
will use for the print job.
1
Property
Description
Make sure that Paper Source is set to
the appropriate paper tray.
1
Tray Selection
Use the Manual Feed source when
printing on special material. You need
Bypass tray. See page 3.8.
If you install an optional Tray 2 and set
Tray 2 in printer properties (see
page D.8), you can select Tray2
.
If the paper source is set to
Automatically Select, the machine
automatically picks up print material in
the following order: the Bypass tray,
Tray 1, and optional Tray 2.
B
USING WINDOWS POSTSCRIPT DRIVER (WorkCentre PE120i Only) B.7
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
B.8
USING WINDOWS POSTSCRIPT DRIVER (WorkCentre PE120i Only)
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTING FROM A
MACINTOSH
(WORKCENTRE PE120I ONLY)
C
Your machine supports Macintosh systems with a built-in
USB interface or an optional 10/100 Base-TX network
interface card. When you print a file from a Macintosh
PPD file.
This chapter includes:
• Installing Software for Macintosh
• Setting Up the Machine
• Printing a Document
• Using Advanced Printing Features
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Software for Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
Refer to the table below for the driver available for your
machine.
Your Machine Available Driver
Connection
Mac OS 8.6~9.2
WorkCentre
Network interface
PE120i
Mac OS 10.1 ~
10.3
USB interface,
Network interface
Verify the following before you install the software:
Item
Requirements
Operating system
Mac OS 8.6 ~ 9.2/10.1~ 10.3
Mac OS 8.6~9.2
Mac OS 10.1 ~ 10.3
200 MB
64 MB
128 MB
RAM
Free disk space
1
Connect your machine to the computer using the USB cable
or the Ethernet cable. For details, see page 2.12 and
page 2.14.
2
3
Turn on your computer and the machine.
Insert the PS driver CD-ROM which came with your
machine into the CD-ROM drive.
4
5
6
Double-click the Xerox_MFP on your Macintosh desktop.
Double-click the Installer folder.
For Mac OS 8.6~9.3, double-click the Xerox WC PE120
Series_Classic icon.
For Mac OS 10.1~10.3, double-click the Xerox WC PE120
Series_OSX icon.
C.2
Printing From a Macintosh (WORKCENTRE PE120I ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
9
Click Continue
Click Install
After the installation is finished, click Quit
.
.
.
C
Printing From a Macintosh (WORKCENTRE PE120I ONLY) C.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Machine
The way to set up your machine is different depending on which
cable you use to connect the machine to your computer-the
network cable or the USB cable.
Mac OS 8.6 ~ 9.2
1
Follow the instructions on page C.2 to install the PPD file on
your computer.
2
3
From the Apple menu, select Chooser
.
Click LaserWriter 8 (the PostScript driver provided with
your Macintosh).
The name of your machine appears on the list.
4
Select XEC000xxxxxxxxx from the printer box (where the
xxxxxxxxx varies depending on each of the machines) and
Click Select
.
If Auto Setup does not work properly, click Select PPD
,
choose Xerox WC PE120 Series, and click OK
.
5
When the setup is complete, you see your machine icon
created as a desktop printer.
6
7
Close the Chooser
.
When a message window appears telling you that you have
Mac OS 10.1 ~ 10.3
1
Follow the instructions on page C.2 to install the PPD file on
your computer.
2
3
Open Print Center from the Utilities folder.
Click Add on the Printer List.
C.4
Printing From a Macintosh (WORKCENTRE PE120I ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select the AppleTalk tab.
The name of your machine appears on the list. Select
XEC000xxxxxxxxx from the printer box, where the
xxxxxxxxx varies depending on your machine.
5
6
Click Add.
If Auto Select does not work properly, select Xerox in
Printer Model and Xerox WC PE120 Series in Model
Name.
Your machine appears on the Printer List and is set as the
default printer.
For a USB-connected Macintosh
Mac OS 10.1 ~ 10.3
1
Follow the instructions on page C.2 to install the PPD file on
your computer.
2
3
Open Print Center from the Utilities folder.
Click Add on the Printer List.
Select the USB tab.
4
5
6
Select WorkCentre PE120 Series and click Add
.
If Auto Select does not work properly, select Xerox in
Printer Model and Xerox WC PE120 Series in Model
Name.
Your machine appears on the Printer List and is set as the
default printer.
C
Printing From a Macintosh (WORKCENTRE PE120I ONLY) C.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a Document
When you print with a Macintosh computer, you need to check
the printer software setting in each application you use. Follow
these steps to print from a Macintosh computer:
NOTE: The LaserWriter driver’s window may be different
depending on the version of your Macintosh system, but the
features available are the same.
1
2
3
Open a Macintosh application and select the file you want
to print.
Open the File menu and click Page Setup
Setup in some applications).
(Document
Choose your paper size, orientation, scaling, and other
options and click OK
.
S
Mac OS 10.3
4
5
Open the File menu and click Print.
Choose the number of copies you want and indicate which
pages you want to print.
6
Click Print when you finish setting the options.
C.6
Printing From a Macintosh (WORKCENTRE PE120I ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling a Print Job
To cancel a print job, press the Stop/Clear button on the
control panel. The machine finishes printing the page that is
moving through the machine and deletes the rest of the print
job.
- Printing Multiple Pages on One Sheet of Paper
- Scheduling a Print Job
Printing Multiple Pages on One Sheet of
Paper
You can print more than one page on a single sheet of paper.
This feature provides a cost-effective way to print draft pages.
1
2
From your Macintosh application, select Print from the File
menu.
Select the Layout
.
C
S
Mac OS 10.3
3
Select the number of pages you want to print on one sheet
of paper on the Pages per Sheet drop-down list.
Printing From a Macintosh (WORKCENTRE PE120I ONLY) C.7
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Select the page order on the Layout Direction option.
To print a border around each page on the sheet, select the
option you want on the Border drop-down list.
Click Print and the machine prints the selected number of
pages on one side of each page.
Scheduling a Print Job
You can set your machine to print a job at a future time.
1
2
From your Macintosh application, select Print from the File
menu.
Select Scheduler
.
S
Mac OS 10.3
3
Select the time when you want the print job to be printed.
•
•
Now: The machine prints a job immediately.
At: The machine prints a job at the time you set in the
field.
•
On hold: The machine holds a print job in the print
queue until you are ready to release it.
4
5
Select a priority for your print job on the Priority drop-
down list.
Click Print
.
C.8
Printing From a Macintosh (WORKCENTRE PE120I ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING MACHINE
OPTIONS
D
Your machine is a full-featured laser printer that has been
optimized to meet most of your printing needs. Recognizing
that each user may have different requirements, however,
machine’s capabilities.
This chapter includes:
• Installing Memory DIMM
• Installing an Optional Tray
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Memory DIMM
Your machine has a dual in-line memory module (DIMM) slot.
Use this DIMM slot to install more memory option for the
machine.
NOTE: Your machine has 32 MB of memory which can be
expanded to 160 MB. Use only a Xerox-approved DIMM. Contact
your Xerox dealer.
CAUTION: Static electricity can damage DIMMs. When handling a
DIMM, either wear an antistatic wrist strap, or frequently touch the
surface of the DIMM antistatic package and then touch bare metal
on the machine.
1
2
Turn the machine off and unplug all cables and the power
cord from the machine.
Hold the control board cover and remove it.
3
Completely open the latches on each side of the DIMM slot.
D.2
Installing Machine Options
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Remove the memory DIMM from its antistatic package.
Locate the alignment notches on the bottom edge of each
DIMM.
Notches
Connection
points
5
Holding the memory DIMM by the edges, align the notches
on the memory DIMM with the grooves at the top of the
memory DIMM slot.
Groove
Notch
6
Push the DIMM straight into the DIMM slot until it snaps into
place. Make sure the latches fit over the notches located on
either side of the DIMM.
Notch
Latch
D
Installing Machine Options D.3
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Replace the control board cover.
8
Reconnect the power cord and printer cable, and turn the
machine on.
the printer properties of the PostScript printer driver so that
you can use it with your machine (WorkCentre PE120i only
):
1. Make sure that the PostScript printer driver is installed in your
computer. For details about installing the PS printer driver, see
page B.2.
2. Click the Windows Start menu.
3. For Windows 95/98/Me/NT 4.0/2000, select Settings and then
Printers
.
For Windows XP, select Printers and Faxes
.
4. Select the Xerox WC PE120 Series PS printer.
5. Click the right mouse button on the machine icon and select
Properties
.
6. For Windows 95/98/Me, select Device Options tab.
For Windows NT 4.0/2000/XP, select Device Settings tab.
7. Select the memory DIMM you installed in from Printer
Memory in the Installable Option section and click OK
For Windows 98, select Installable Option VMOption
change setting for:VMOption change memory
.
→
→
→
.
D.4
Installing Machine Options
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing a Memory DIMM
1
2
Follow steps 1 through 2 on page D.2 to access the control
board.
Push the latches at both ends of the DIMM slot away from
the DIMM. Pull out the DIMM.
3
4
sheet of thin metal, such as aluminium foil, and store it in a
box.
Follow from step 7 on page D.4.
D
Installing Machine Options D.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing an Optional Tray
You can increase the paper handling capacity of your machine
by installing an optional Tray 2. This tray holds 250 sheets of
paper.
1
2
Turn the machine off and unplug all cables from the
machine.
Remove the packing material from the tray and remove the
tape fixing the interface cable to the tray.
3
Find the location of the connector and the optional tray
positioners.
D.6
Installing Machine Options
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Place the machine over the tray, aligning the feet on the
machine with the positioners in the tray.
Lifting handles are
located at the lower
edge of both sides of
the machine.
5
Plug the interface cable of the tray into the connector on the
back of the machine.
6
Load paper in the tray. The instructions for loading paper in
tray. See page 2.7.
7
8
After loading paper, you need to set the paper type and size
for Tray 2. See page 2.21.
D
Reconnect the power cord and cables and then turn the
machine on.
Installing Machine Options D.7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Tray 2 in the Printer Properties
If you installed Tray 2 with your machine on, the machine does
not recognize it. In this case, you need to set the tray in the
printer properties window so that you can use it for PC printing.
The procedure for setting the tray may differ depending on the
selected printer driver.
To set the tray in the printer properties of the PCL 6 printer
driver:
1
2
Click the Windows Start menu.
For Windows 98/Me/NT 4.0/2000, select Settings and then
Printers
.
For Windows XP, select Printers and Faxes
.
3
4
Select the Xerox WC PE120 Series PCL 6 icon.
Click the right mouse button on the machine icon and select
Properties
.
5
6
Click the Printer Configuration tab, and select Tray 2
from the Optional Tray drop-down list.
Click OK
.
To set the tray in the printer properties of the PostScript printer
driver (WorkCentre PE120i only).
1
2
Click the Windows Start menu.
For Windows 95/98/Me/NT 4.0/2000, select Settings and
then Printers
.
For Windows XP, select Printers and Faxes
.
3
4
Select the Xerox WC PE120 Series PS machine icon.
Click the right mouse button on the machine icon and select
Properties
.
5
6
Click the Device Settings tab, and select Installed from
the Tray2 drop-down list.
Click OK
.
D.8
Installing Machine Options
Download from Www.Somanuals.com. All Manuals Search And Download.
General Specifications
Item
Description
Automatic document
feeder
Up to 50 sheets (20 lb, 75 g/m2)
Width: 142 to 216 mm (5.6 to 8.5 inches)
Length: 148 to 356 mm (5.8 to 14 inches)
ADF document size
Paper tray (standard Tray 1 and optional Tray 2): 250
sheets (weight: 75 g/m2, 20 lb)
Paper input capacity
Bypass tray: 50 sheets for plain paper (weight: 75 g/m2,
20 lb), 5 sheets for card stock, labels, transparencies,
and envelopes
Front output tray: 150 sheets (face down)
Rear output slot: 1 sheet (face up)
Paper output capacity
Paper type
Paper tray: Plain paper (60 ~ 90 g/m2, 16 ~ 24 lb)
Bypass tray: Plain paper, Transparencies, Labels, Card,
Post card, Envelopes (60 ~ 120 g/m2, 16 ~ 32 lb)
Consumables
1-piece toner cartridge system
100 ~ 127 VAC, 50/60 Hz, 5.0 A
220 ~ 240 VAC, 50/60 Hz, 2.6 A
Power requirements
Sleep mode: 30 W
Average: 400 W
Power consumption
Noise*
Standby mode: Less than 39 dBA
Printing: Less than 54 dBA
Copy: Less than 55 dBA
Warm-up time
Less than 42 seconds
Temperature: 50 oF to 89 oF (10 oC to 32 oC)
Humidity: 20 % to 80 % RH
Operating conditions
LCD
16 characters x 2 lines
3,500 or 5,000 pages at ISO 19752 5 % coverage (Ships
with 3,500 pages Start Toner Cartridge)
Toner cartridge life**
SET dimension
(W x D x H)
450 x 435 x 457 mm
Net: 17 Kg (including consumables)
Weight
Gross: 21 Kg (including consumables, accessories and
package)
E.2
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Paper: 2.8 Kg
Plastic: 0.7 Kg
Package weight
Print: Up to 15,000 pages
Scan: Up to 1,000 pages
ADF: Up to 1,000 pages
Duty cycle (Monthly)
*Sound Pressure Level, ISO7779
**The number of pages may be affected by operating environment, printing interval, media type, and me-
dia size.
Scanner and Copier Specifications
Item
Compatibility
Description
WIA along with TWAIN Standard
ADF and Flat-bed Color CCD (Charge Coupled Device)
module
Scanning method
Resolution
Optical: 600 x 1200 dpi (Mono and color)
Enhanced: 4,800 x 4,800 dpi (USB)
Platen: 293 mm (11.5 in.)
ADF: 356 mm (14 in.)
Effective scanning length
Effective scanning width
Color bit depth
Max. 208 mm (8.2 in.)
24 bit
1 bit for Text mode
8 bit for Gray mode
Mono bit depth
Scan speed
27 seconds (Text mode)
75 seconds (Gray mode)
150 seconds (Color mode)
Letter: Up to 22 pages per minute
A4: Up to 20 pages per minute
Copy speed*
Scan: 600 x 300 (Text, Mixed) / 600 x 600 (Photo)
Print: 600 x 600 (Text, Mixed, Photo)
Copy resolution
Platen: 25 ~ 400 %
ADF: 25 ~ 100 %
Zoom rate
E
Multiple copies
1-99 pages
E.3
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Gray scale
128 levels
*Copy Speed is based on Single Document Multiple Copy.
Printer Specifications
Item
Description
Printing method
Printing speed*
Laser Beam Printing
Letter: Up to 22 PPM (pages per minutes)
A4: Up to 20 PPM (pages per minutes)
Standby mode: 10 seconds
First printing time
Power save mode: 50 seconds
Paper tray: Letter, A4, Legal, Folio, Executive, B5
Bypass tray: Letter, Legal, A4, Folio, Executive, A5, A6,
Envelope 10, Envelope DL, Envelope C5, Envelope C6,
JIS B5, Monarch Envelope
Paper size
* Min.: 76 x 127 mm (3 x 5 in.)
Max.: 216 x 356 (8.5 x 14 in.)
Printer resolution
Emulation
600 x 600 dpi (1200 x 600 dpi)
PCL 6** Compatible, SPL, PostScript 3 (WorkCentre
PE120i only)
• PCL driver: Windows 98/2000/NT 4.0/Me/XP
• Various Linux OS (USB only)
Printer drivers***
• PS driver (WorkCentre PE120i only): Windows 98/
2000/NT 4.0/Me/XP, Macintosh OS 8.6~9.2/
10.1~10.3
32 MB (Max. 160 MB)
Memory
Inteface
16, 32, 64, 128 MB optional memory available
Use only the Xerox-approved DIMM.
IEEE 1284 Parallel, USB 2.0, Ethernet 10/100 Base TX
(WorkCentre PE120i only)
*Print speed will be affected by operating system used, computing performance, application software, con-
necting method, media type, media size, and job complexity.
**Compatible with PCL6 Version 2.1
E.4
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Facsimile Specifications
Item
Description
Compatibility
Applicable line
ITU-T Group 3
Public Switched Telephone Network (PSTN) or behind
PABX
MH/MR/MMR (ECM Mode) and JPEG for color fax
transmission
Data coding
Modem speed
33.6 Kbps
Approx. 3 seconds/page
* Transmission time applies to memory transmission of
text data with ECM compression using only ITU-T No.1
Chart.
Transmission speed
Platen: 297 mm
ADF: 400 mm
Maximum document length
Paper size
Letter, A4, Legal
Standard: 203 x 98 dpi
Resolution
Fine: 203 x 196 dpi
Super Fine: 300 x 300 dpi / 203 x 392 dpi
User memory
Halftone
4 MB (320 pages)
256 levels
One-touch dialing (up to 40 numbers)
Speed dialing (up to 200 numbers))
Auto dialer
E
E.5
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper Specifications
Overview
Your machine accepts a variety of print materials, such as cut-sheet paper (including
up to 100% recycled fiber content paper), envelopes, labels, transparencies and
custom-size paper. Properties, such as weight, composition, grain and moisture
content, are important factors affecting the machine’s performance and the output
quality. Paper that does not meet the guidelines outlined in this user’s guide can
cause the following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
NOTES
:
• Some paper may meet all of the guidelines in this guide and still not produce
satisfactory results. This may be the result of improper handling, unacceptable
temperature and humidity levels, or other variables over which Xerox has no control.
• Before purchasing large quantities of paper, insure the paper meets the requirements
specified in this user’s guide.
CAUTION: Using paper that does not meet these specifications may cause problems,
requiring repairs. These repairs are not covered by the Xerox warranty or service
agreements.
Supported Sizes of Paper
Dimensions*
Capacity**
Paper
Weight
8.5 x 11 in.
(216 x 279 mm)
Letter
A4
• 60 to 105 g/m2
bond (16 to
24 lb) for the
paper tray
• 60 to 120 g/m2
bond (16 to
43 lb) for the
Bypass tray
• 250 sheets of 75
210 x 297 mm
(8.3 xX 11.7 in.)
g/m2 bond (20
lb) paper for the
paper tray
7.25 x 10.5 in. (191
x 267 mm)
Executive
Legal
• 50 sheet of
paper for the
Bypass tray
8.5 x 14 in.
(216 x 356 mm)
216 x 330 mm
(8.5 x 13 in.)
Folio
E.6
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions*
Capacity**
Paper
Weight
76 x 127 mm
(3 x 5 in)
Minimum size (custom)
60 to 120 g/m2
bond (16 to
32 lb)
216 x 356 mm
(8.5 x 14 in)
Maximum size (Legal)
5 sheets of paper
for the Bypass
tray
138 to 146 g/m2
120 to 150 g/m2
90 to 163 g/m2
75 to 90 g/m2
Transparency
Labels
Same minimum and
maximum paper
sizes as listed
above.
Cards
Envelopes
*The machine supports a wide range of media sizes. See “Paper Type, Input Sources, and Capacities” on
page 3.2.
**Capacity may differ depending on media weight, thickness, and environmental conditions.
NOTE: You may experience jams when using print materials with a length of less than
127 mm (5 in.). For optimum performance, ensure that you are storing and handling the
paper correctly. Please refer to “Paper Storage Environment” on page E.8.
Guidelines for Using Paper
For the best result, use conventional 75 g/m2 (20 lb) paper. Ensure that the paper is
of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles,
voids, and curled or bent edges.
If you are unsure of what type of paper you are loading, such as bond or recycled
paper, check the label on the package.
The following problems may cause print quality deviations, jamming or even damage
to the machine:
Symptom
Problem with Paper
Solution
Poor print quality or toner
adhesion, problems with
feeding
Too moist, too rough, too
smooth or embossed;
faulty paper lot
Try another kind of paper,
4 ~ 5 % moisture content.
Store paper flat in its
moisture-proof wrapping.
Dropout, jamming, curl
Stored improperly
Too heavy
Increased gray background
shading/printer wear
Use lighter paper, use the
rear output slot.
Too moist, wrong grain
direction or short-grain
construction
• Use the rear output slot.
• Use long-grain paper.
Excessive curl problems with
feeding
Jamming, damage to
machine
Do not use paper with
cutouts or perforations.
E
Cutouts or perforations
E.7
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problem with Paper
Solution
Problems with feeding
Ragged edges
Use good quality paper.
NOTES
:
• Do not use letterhead paper printed with low-temperature inks, such as those used in
some types of thermography.
• Do not use raised or embossed letterhead.
• The machine uses heat and pressure to fuse toner to the paper. Insure that any colored
paper or preprinted forms use inks that are compatible with this fusing temperature
(200 °C or 392 °F for 0.1 second).
Paper Specifications
Category
Acid content
Specifications
5.5 pH or lower
Caliper
0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)
Flat within 5 mm (0.02 in.)
Curl in ream
Cut edge conditions
Cut with sharp blades with no visible fray.
Must not scorch, melt, offset, or release hazardous
emissions when heated to 200 °C (392 °F) for 0.1
second.
Fusing compatibility
Grain
Long grain
Moisture content
4 % ~ 6 % by weight
Paper Output Capacity
Output Location
Capacity
150 sheets of 75 g/m2 bond (20 lb) paper
1 sheet of 75 g/m2 bond (20 lb) paper
Face-down output tray
Face-up output slot
Paper Storage Environment
Paper storage environmental conditions directly affect the feed operation.
E.8
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Ideally, the machine and paper storage environment should be at or near room
temperature, and not too dry or humid. Remember that paper is hygroscopic; it
absorbs and loses moisture rapidly.
Heat works with humidity to damage paper. Heat causes the moisture in paper to
evaporate, while cold causes it to condense on the sheets. Heating systems and air
conditioners remove most of the humidity from a room. As paper is opened and used,
it loses moisture, causing streaks and smudging. Humid weather or water coolers can
cause the humidity to increase in a room. As paper is opened and used it absorbs any
excess moisture, causing light print and dropouts. Also, as paper loses and gains
moisture it can become distorted. This can cause paper jams.
Care should be taken not to purchase more paper than can be used in a short time
(about 3 months). Paper stored for long periods may experience heat and moisture
extremes, which can cause damage. Planning is important to prevent damage to
large supplies of paper.
Unopened paper in sealed reams can remain stable for several months before use.
Opened packages of paper have more potential for environment damage, especially
if they are not wrapped with a moisture-proof barrier.
The paper storage environment should be properly maintained to ensure optimum
performance. The required condition is 20 to 24 °C (68 to 75 °F), with a relative
humidity of 45 % to 55 %. The following guidelines should be considered when
evaluating the paper’s storage environment:
• Paper should be stored at or near room temperature.
• The air should not be too dry or too humid.
• The best way to store an opened ream of paper is to rewrap it tightly in its
moisture-proof wrapping. If the machine environment is subject to extremes,
unwrap only the amount of paper to be used during the day’s operation to prevent
unwanted moisture changes.
Envelopes
Envelope construction is critical. Envelope fold lines can vary considerably, not only
between manufacturers, but also within a box from the same manufacturer.
Successful printing on envelopes depends upon the quality of the envelopes. When
selecting envelopes, consider the following components:
• Weight: The weight of the envelope paper should not exceed 90g/m2 (24lb) or
jamming may occur.
• Construction: Prior to printing, envelopes should lie flat with less than 6mm
(0.25in.) curl, and should not contain air.
• Condition: Envelopes should not be wrinkled, nicked or otherwise damaged.
• Temperature: You should use envelopes that are compatible with the heat and
pressure of the machine.
E
E.9
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
• Size: You should only use envelopes within the following size ranges.
Minimum
76 x 127 mm
Maximum
216 x 356 mm
(8.5 x 14 in.)
Bypass tray
(3 x 5 in.)
NOTES
• Use only the manual feeder to print envelopes.
• You may experience some paper jams when using any media with a length less than
140 mm 5.5 in.). This may be caused by paper that has been affected by
:
(
environmental conditions. For optimum performance, make sure you are storing and
handling the paper correctly. Please refer to “Paper Storage Environment” on page E.8.
Envelopes with Double Side Seams
Double side-seams construction has vertical seams at both ends of the envelope
rather than diagonal seams. This style may be more likely to wrinkle. Be sure the
seam extends all the way to the corner of the envelope as illustrated below.
Correct
Incorrect
Envelopes with Adhesive Strips or Flaps
Envelopes with a peel-off adhesive strip or with more than one flap that folds over to
seal must use adhesives compatible with the heat and pressure in the machine. The
extra flaps and strips might cause wrinkling, creasing or even jams and may even
damage the fuser.
Envelope Margins
The following gives typical address margins for a commercial #10 or DL envelope.
Type of Address
Return address
Minimum
15 mm (0.6 in.)
51 mm (2 in.)
Maximum
51 mm (2 in.)
Delivery address
90 mm (3.5 in.)
E.10
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
:
• For the best print quality, position margins no closer than 15 mm (0.6 in.) from the
edges of the envelope.
• Avoid printing over the area where the envelope’s seams meet.
Envelope Storage
Proper storage of envelopes helps contribute to print quality. Envelopes should be
stored flat. If air is trapped in an envelope, creating an air bubble, then the envelope
may wrinkle during printing.
Labels
CAUTIONS
:
• To avoid damaging the machine, use only labels recommended for laser printers.
• To prevent serious jams, always use the manual feeder to print labels and always use
the rear output tray.
• Never print on the same sheet of labels more than once and never print on a partial
sheet of labels.
When selecting labels, consider the quality of each component:
• Adhesives: The adhesive material should be stable at 180°C (356°F), the
machine’s fusing temperature.
• Arrangement: Only use labels with no exposed backing between them. Labels can
peel off sheets with spaces between the labels, causing serious jams.
• Curl: Prior to printing, labels must lie flat with no more than 13mm (5in.) of curl in
any direction.
• Condition: Do not use labels with wrinkles, bubbles or other indications of
separation.
Transparencies
Transparencies used in the machine must be able to withstand 180°C (356°F), the
machine’s fusing temperature.
CAUTION: To avoid damaging the machine, use only transparencies recommended for
use in laser printers.
E
E.11
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
connection
AC power 2.14
Numerics
extension phone 2.11
parallel 2.13
telephone line cord 2.11
USB 2.12
A
adding documents 7.33
automatic dialing
installing 2.29, B.2
starting 2.37
tabs 2.38
group 7.23
one-touch 7.19
speed 7.21
copying
collation 5.10
from ADF 5.5
from document glass 5.4
number of pages 5.9
original type 5.7
time out, set 5.15
B
broadcasting faxes 7.28
C
DIMM
installing D.2
removing D.5
canceling
copy 5.5
fax 7.12
print 4.3
scan 6.5
scheduled faxes 7.34
cleaning
jam, clear 9.2
loading
document glass 5.4, 7.7
preparing 5.3
drum 8.10
inside 8.3
outside 8.3
cleaning 8.5
scan unit 8.5
loading 7.7
clone, more features 5.10
collation, more features 5.10
components 1.5
DRPD (Distinctive Ring Pattern
Detection) 7.17
drum, clean 8.10
1
Download from Www.Somanuals.com. All Manuals Search And Download.
loading, paper
in the bypass tray 3.6
E
using the manual feed 3.8
extension phone, connect 2.11
F
M
fax system, set
basic settings 7.3
fit to page
common problems 9.34
printing C.6
copying 5.11
printing 4.18
installing D.2
removing D.5
memory, clear 8.2
MFP driver, install
Linux A.4
G
group dial
dialing 7.25
editing 7.24
setting 7.23
Macintosh C.2
Windows
PCL 6 printer driver 2.29
H
I
locally shared printer, set 4.24
n-up (multiple pages per sheet)
copying 5.12
installing
Memory D.2
printing 4.15
optional Tray2 D.6
PS driver B.2
toner cartridge 2.5
O
one-touch dial
dialing 7.20
storing 7.19
option, install
J
memory DIMM D.2
paper tray 2 D.6
jam, clear
document 9.2
paper 9.5
L
Linux
paper level indicator 3.5
paper load
common problems 9.30
driver, install A.4
printer properties A.11
printing A.12
in manual feeder 3.8
in paper tray 2.7
scanning A.14
in the bypass tray 3.6
2
Download from Www.Somanuals.com. All Manuals Search And Download.
paper load capacity 3.2
paper size, set
printing quality 9.21
scanning 9.27
paper tray 2.21
print 4.6, A.13
paper source, set 4.7, A.13
paper type, set
print 4.7, A.13
poster
copying 5.13
printing 4.16
PostScript driver
R
receiving a fax
in DRPD mode 7.17
in Fax mode 7.15
in Tel mode 7.15
in the memory 7.18
redialing
installing B.2
automatically 7.13
print quality problems, solve 9.21
print resolution A.13
printer driver, install
Linux A.4
Macintosh C.2
Windows
PCL 6 printer driver 2.29
PostScript B.2
printer properties
Linux A.12
copying 5.8
printing 4.19
ADF rubber pad 8.13
toner cartridge 8.8
resolution
faxing 7.9
scanning
printing
Linux A.14
posters 4.16
USB flash drive 10.3
WIA driver 6.4
sending a fax
reports 7.36
watermarks 4.20
problem, solve
facsimile E.5
general E.2
paper E.6
printer E.4
copying 9.26
error messages 9.13
faxing 9.28
Linux 9.30
Macintosh 9.34
paper feeding 9.17
printing 9.18
scanner and copier E.3
speed dial
dialing 7.22
storing 7.21
3
Download from Www.Somanuals.com. All Manuals Search And Download.
system requirements
Linux A.3
Macintosh C.2
T
toner cartridge
installing 2.5
maintaining 8.6
redistributing 8.7
replacing 8.8
toner save mode, use 2.24
U
uninstalling
MFP driver
USB
USB flash drive
installing 10.2
managing 10.6
printing 10.10
scanning 10.3
V
volume, adjust
ringer 2.23
speaker 2.23
W
watermarks, use 4.20
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Whirlpool Dehumidifier AD65USM2 User Manual
Whirlpool Freezer CHEST FREEZERS User Manual
Whirlpool Microwave Oven GSC278 User Manual
Wolf Fryer WF50 User Manual
Zanussi Air Compressor ZOB 482 XL User Manual
Zanussi Cooktop 200150 User Manual
Zanussi Refrigerator RS13PW2F User Manual
Zanussi Refrigerator ZDC 57 L User Manual
Zanussi Washer ZWF 1840 W User Manual
Zeki Tablet TBD753B User Manual