WASHER-DRYER
ZWD 1662 W
Off
Cottons
ZWD 1662
W
Mini 30°
95°
Spin
Drain
Softener
Function
Drying
1600
1200
900
Prewash
60°
50°
40°
Quick
End cycle
Rinses
700
Time
Extra rinse
Soak 30
30°
Dry
Easy
Iron
1/2 Load
Autodry
Drying
Time
Start/
Pause
Spin
Options
Wool
30°
40°
60°
50°
30°
40°
Synthetics
Delicates
40°
30°
Dry
Quick Installation Guide:
visit our WEB SITE to view an install video
GB
INSTRUCTION BOOKLET
132 978 160
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Wash Care Symbols
Washing Programmes
Drying Programmes
15
16-17
18
For the User
Important Safety Information
Your New Washer-Dryer
2
4
Maintenance and Cleaning
Descaling
After each wash
19-20
19
Description of the Appliance
Detergent dispenser drawer
Child safety feature
5
5
5
19
19
Maintenance wash
External cleaning
19
19
19-20
20
20-21
21
The Control Panel
Operating sequence
Washing
6-9
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the pump
Cleaning the water inlet filter
The dangers of freezing
Emergency emptying out
10-111
10
10
10
10
Load the laundry
Measure out the detergent
Measure out the fabric softener
Switch the machine on
21
and select the required programme
Select the spin speed or the “Rinse Hold” option
Select the desired options
Start the programme
How to change an option or a programme
during its cycle
How to cancel a programme during its cycle
How to open the door during the cycle of
a programme
End of programme
Programme Information
10
11
11
11
Something Not Working
Service and Spare Parts
Guarantee Conditions
22-23
23
24
11
11
For the Installer
Installation Instructions
25
11
11
11
Technical Specifications
Unpacking
Positioning
Water inlet
Water drainage
25
26
26
Drying 3 kg of cotton
12
12
27
Autodrying 2 kg of synthetics
27-28
28
Levelling
Washing and Drying Hints
Which detergent to use?....
And in which form?
13
14
14
Special conditions
In the interest of the environment
Electrical connection
28
28
29
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Your New Washer-Dryer
This new machine, meets all modern requirements for effective treatment of laundry with low
water, energy and detergent consumption.
●
The special wool programme with its new delicate
In the interest
wash system treats your woollens with extreme care.
of the environment
●
The balance control device ensures that the
machine remains stable when spinning.
●
Materials marked with the symbol
recyclable.
are
●
Automatic cooling of the wash water to 60°C
before draining, with the 95°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
●
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
●
●
The two drying programmes will give your wash
that soft, relaxed feel whatever the weather.
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
The ECO VALVE allows total use of detergent and
reduces water consumption so saving energy.
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
Ecological hints
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. For more detailed information about
recycling of this product, please contact your local
city office, your household waste disposal service or
the shop where you purchased the product.
●
Adjust the quantity of detergent according to the
hardness of your water supply, the amount of
laundry and the degree of soiling.
●
Select the “Quick” wash option for lightly soiled
laundry.
●
A programme without prewash is sufficient for
normally soiled laundry.
●
Try to load the maximum drying capacity of the
machine as small loads are uneconomical.
●
Always load well spun laundry. The higher the spin
speed, the lower the electricity consumption and the
shorter the drying times.
How do we help to protect the environment?
We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed "Something
Not Working".
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the Appliance
1 Detergent dispenser drawer
2 Control panel
2
1
3 Door opening handle
4 Drain pump
Off
ZWD 1662
W
Cottons
Mini 30°
Spin
Drain
Softener
95°
1600
1200
900
Prewash
Function
Drying
60°
50°
40°
Quick
End cycle
Rinses
700
Time
Extra rinse
Soak 30
30°
Dry
Easy
Iron
1/2 Load
Autodry
Drying
Time
Start/
Pause
Spin
Options
Wool
30°
40°
60°
50°
30°
40°
Synthetics
Delicates
40°
30°
Dry
5 Adjustable feet
3
4
5
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
C0063
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
P1131
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel
Off
ZWD 1662 W
Cottons
Mini 30°
95°
Spin
Drain
Softener
Function
Drying
1600
1200
900
Prewash
60°
50°
40°
End cycle
Quick
Rinses
700
Time
Extra rinse
Soak 30
30°
Dry
Easy
Iron
1/2 Load
Autodry
Drying
Time
Start/
Pause
Spin
Options
Wool
30°
40°
60°
50°
30°
40°
Delicates
Synthetics
40°
30°
Dry
1
2
3
4
5
7
8
9
10
Attention!
1 Detergent dispenser drawer
2 Programme selector dial
If you turn the programme selector dial to another
programme when the machine is working, a warning
message appears for 3 seconds on the display.
The selector dial is divided into the following sections:
• Cottons
• Synthetics
• Delicates
3 “Spin” button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washer-dryer or to choose
• Wool
(Handwash)
• Soak 30, Rinses, Softener, Drain, Spin and Mini
the
light up.
“Rinse Hold” option. The relevant light will
30°
• “O” Off = Reset/Switching the machine off
Maximum speeds are:
• for cottons: 1600 rpm
• for synthetics fabrics and Wool: 900 rpm;
• for delicate fabrics and Mini 30°: 700 rpm.
Off
Cottons
Mini 30°
Spin
Drain
Softener
95°
60°
50°
40°
Rinses
“Rinse Hold” position: when you choose this
option, the machine will not drain the water of the last
rinse, so as not to crease the laundry.
Soak 30
30°
Dry
Wool
30°
40°
60°
50°
30°
40°
Delicates
Synthetics
40°
30°
Dry
At the end of the cycle, the light of the “Start/Pause”
button goes out, the “End cycle” light illuminates but
the door is locked to indicate that the water must be
drained. A flashing zero appears on the display.
The selector dial can be turned either clockwise or
anticlockwise.
To complete the cycle, there are 2 possibilities:
• Select programme “Drain” and then depress the
Start/Pause button: the water is emptied out without
spinning.
E- position corresponds to the ENERGY SAVING
programme for cotton and position “O” Off to Reset
programme/Switching off of the machine.
• Select programme “Spin”. Select the spin speed by
means of the relevant button and then depress the
Start/Pause button. The water is emptied out and
the laundry is spun at the selected spin speed.
corresponds to a cold wash.
At the end of the programme the selector dial must be
always turned to position “O” Off , to switch the
machine off .
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Attention! Before selecting the “Drain” or the “Spin”
programmes, the selector dial must to be turned to the
“O” Off position.
• Extra rinse: This option can be selected with all
programmes, except the Wool programmes and Mini
30°. The machine will add 2 rinses to the programmes
for cotton and 1 rinse to the programmes for
synthetics.
This option is recommended for people who are
allergic to detergents, and areas where the water is
very soft.
Important!
The Rinse Hold option cannot be selected for the
automatic WASHING & DRYING programme.
The Prewash, the Quick and the Extra rinse options
cannot be selected together by means of the relevant
button.
4
“Easy Iron”
button
Selecting this button the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier.
Furthermore the machine will perform 6 rinses instead
of 3 for cotton and 4 rinses instead of 3 for synthetics.
This function can be used only for Cotton and Synthetic
fabrics.
7
Display
The following pieces of information are shown on the
display:
If this option is selected for cotton programmes, the spin
speed automaticaly will reduce to 900 rpm.
If this option is selected for synthetic programmes with
a temperature of 60°C or 50°C, the machine will
perform a washing cycle at max 40°C.
•
Duration of washing programme in hours and
minutes, after you have selected a programme.
5
“1/2 Load Autodry” button
2.05
Select this option to reduce water consumption on the
rinse cycle when washing ONLY a smaller load of
cottons or linens (maximum load size = 3 kg).
The machine performs the rinses with less water.
Note
While the programme is running (after you have
pressed the “Start/Pause” button), the displayed time
value decreases by one unit every minute.
It is possible to select this option when selecting the
automatic Washing & Drying cycle (maximum load
size = 3 kg).
• Selected drying time in minutes or hours and
minutes (max 130 mins).
6
“Options” button
Press this button to select the following options:
• Prewash: select this option if you wish your laundry
to be prewashed at 30° C before the main wash (not
available for Wool and Mini 30° programmes).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
1.25
After the programme has started the time remaining is
updated every minute.
• “Quick”: select this option for laundry that is only
slightly soiled (not available for E60° Cottons,
Mini 30° and Wool programmes).
The washing time will be reduced according to the
type of fabric and the selected temperature.
• The washing machine has stopped with water in
the tub, at the end of a programme with the
“Rinse Hold” option or at the end of the “Soak 30”
programme: this is indicated by a flashing zero.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
• The washing machine has completed the
programme: this is indicated by a flashing zero.
8
“Drying Time” button
By depressing this button you can select a timed
programme for cotton or synthetics, the relevant light
illuminates.
60
0
Time
Drying
Time
Important!
The first time you use the washing machine, when
you switch it on, it may display a flashing zero. This is
due to the fact that the washing machine has performed
a washing cycle during the manufacturer’s inspection
tests, and this cycle has not been erased after its
completion.
For Cottons and Synthetics you can select a drying
time from 10 minutes to 130 minutes (2 .10).
Every time you press the button the time increases by
5 mins.
10 “Start/Pause” button
• An incorrect option selection has been made: this is
indicated by the message Err when a function
incompatible with the current programme is selected.
This button has two functions:
• Start: after you have selected the desired programme
and options, press this button to start the machine. The
light above the button will stop flashing and remain lit.
• Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the
programme, press the button again.
Important! You must set the washing machine to
PAUSE before you make any change in the programme
in progress.
• An alarm code indicates a fault in the machine
operation (see the relevant chapter on page 22-23).
13 Programme phase indicator
lights
E20
Function
Drying
End cycle
When you select a programme, tall the pilot lights are
off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
After you have started the programme, the “Function”
Rinses
light illuminates.
With this programme it is possible to rinse and spin the
garments which have been washed by hand. The
machine performs 3 rinses, followed by a final long spin
at the maximum speed.
At the end of the washing or drying programme, the
“Function” light goes off and the “End cycle” light
illuminates.
When selecting a drying programme, if you turn the
programme selector dial to the “Dry” position or
depress the drying time button in Automatic Washing &
Drying cycle, the “Drying” pilot light illuminates.
Important!
The spin speed will automatically assume the setting for
cotton items. If required, reduce the speed to the desired
level by depressing the “Spin” button.
When the “Drying” light is on, the washer -dryer is
performing the drying cycle.
Softeners
Hand washed garments can be be starched or softened
with this programme.
The machine performs 1 rinse, followed by a final long
spin at the maximum speed, which can be reduced by
depressing the “Spin” button.
The final spin is foreseen only for cotton items as in
the spin programme.
Programme Information
Drain
For emptying out the water of the programme
“Soak 30” or at the end of a programme with the
“Rinse Hold” option.
Soak 30°
This is a special programme for heavily soiled laundry.
The machine performs a soak of about 20 minutes at
30°C. At the end of the soak time the machine will stop
automatically with water left in the tub. The display
will show a flashing zero.
Turn first the programme selector dial to “O” Off, then
select the “Drain” programme and depress the
“Start/Pause” button.
Spin
Pour the detergent for the soak programme into the
Separate long spin at the max speed for hand washed
garments. It has to be used for cotton items. You can
reduce the speed by means of “Spin” button to adapt it
to the fabrics to be spun.
compartment marked
.
This programme cannot be used for very delicate
fabrics or Wool.
Before starting a new washing phase, it is necessary to
empty out the water by:
Mini 30°
• Draining only: turn the programme selector dial to
Drain” programme”. (Depress the “Start/Pause”
button).
This is a complete programme that can be combined
with the following options: Spin speed reduction/
“Rinse hold”.
• Draining and spin: turn the programme selector dial
to programme “Spin”, reduce the spin speed by
means of the “Spin” button, and then depress
“Start/Pause” button.
To be used for laundry which is lightly soiled or which
needs freshening up.
Max. load 2.5 kg.
Washing temperature 30 C.
Programme duration 30 minutes.
Final spin speed 700 rpm.
Important!
• At the end of the soak (after having emptied out the
water) you can select the washing programme. First
turn the programme selector dial to “Off”, then select
the programme and depress the “Start/Pause” button.
“O” Off = Reset programme /switching the machine off
To reset a programme or switching the machine of, turn
the selector dial to “O” Off.
Now a new programme can be selected.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Sequence
WASHING
Before the first wash, we recommend that you pour 2
select the desired programme
Turn the selector dial to the desired programme to
switch the appliance on. The display will show the
duration of the selected programme. The “Start/Pause”
button light will start flashing.
litres of water into the main wash compartment
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 95°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
of
To switch the appliance off turn it to “O” Off position.
Pour 1/2 a measure of detergent into the main wash
Off
compartment
machine.
of the dispenser drawer and start the
Cottons
Mini 30°
Spin
Drain
Softener
95°
60°
50°
40°
Rinses
Soak 30
30°
2.05
Dry
1.Load the laundry
Open the door.
Wool
30°
40°
60°
50°
30°
40°
Delicates
Synthetics
40°
30°
Dry
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
5. Select the spin speed or the
RINSE HOLD option
Close the door.
Press the “Spin” button repeatedly, in order to select the
desired spin speed or the
relevant light will light up.
“Rinse Hold” option. The
If you select the
“Rinse Hold” option, the machine
will stop at the end of the programme with the water
still in the tub.
P0004
1200
900
700
500
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
Spin
main wash compartment
.
If you wish to carry out the prewash or the soak
programme, pour detergent into the appropriate
compartment marked
.
6. Select the desired options
Depress the relevant buttons to select the required
options. The corresponding light illuminates.
3.Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
Prewash
Quick
Extra rinse
Easy
Iron
1/2 Load
Autodry
Options
C0064
C0065
Close the drawer gently.
4.Switch the machine on and
10
Download from Www.Somanuals.com. All Manuals Search And Download.
If these requirements are met, when you pause the
washing machine, the door can be opened.
7. Start the programme
Press the “Start/Pause” button. The relevant light will
stop flashing and remain lit. The “Function” pilot light
illuminates.
Should it not be possible to open the door, and should it
be absolutely necessary to do so, switch the machine off
by turning the selector dial on Off position.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of the
water in the washing machine!
Start/
Pause
After closing the door, select the programme again and
depress the Start/Pause button.
11. End of programme
At the end of the programme, the washer-dryer stops
automatically.
The light of the “Start/Pause” button goes off, the pilot
light “Function” goes off and the phase indicator light
“End cycle” illuminates.The display will show a
flashing zero.
8. How to change an option or a
programme during its cycle
If the programme has already started, before you make
any change, you must pause the washing machine by
pressing the Start/Pause button.
It is possible to change any option before the
programme carries it out.
If you had selected the “Rinse Hold” option, the
corresponding lights will be on, the display will show a
flashing zero but the door will be locked to indicate that
the water must be drained.
Changing a running programme is possible only by
cancelling it and selecting a new programme. Turn the
programme selector dial to “O” Off position and then to
the new programme position. The washing water
remains in the tub. Start the new programme by
depressing the Start/Pause button.
To complete the cycle, there are 2 possibilities :
• turn the selector dial to the “O” Off position, select
programme “Drain” and then depress the
Start/Pause button: the water is emptied out without
spinning.
Note: To drain the water before starting the new cycle
you have to cancel the programme and select the Drain
programme.
or
• turn the selector dial to the “O” Off position and
then select programme “Spin”. Select the spin speed
by means of the relevant button and then depress the
Start/Pause button. The water is emptied out and
the laundry is spun at the selected spin speed.
9. How to cancel a programme
during its cycle
Turn the selector dial to “O” Off position to cancel a
programme which is running. Now you can select a new
programme.
When the programme has been completed, the phase
indicator light “End cycle” illuminates.
Remove the laundry from the washing machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get damaged
in a subsequent wash (e.g. by shrinking) or bleed colour
into another load of laundry.
10. How to open the door during
the cycle of a programme
You can open the door, after having set the washing
machine to PAUSE, provided the following conditions
exist:
• the washing machine is not in the heating phase
beyond 55°C;
We advise you to close the water supply tap and
disconnect the plug from the socket.
• the level of the water is not high;
Leave the door ajar in order to air the washing machine.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
DRYING 3 KG OF COTTON
The programme time will automatically increase by up
to 1 minute, this is quite normal.
You have for example just machine-washed and spun at
1200 rpm 6 kg of laundry.
They are cotton fabrics of medium weight which you
want to iron as soon as they are dry.
AUTODRYING 2 KG OF SYNTHETICS
Turn the selector dial to the “O” Off position to switch
the machine off.
You intend to wash and dry automatically 2 kg of
synthetics which do not need ironing.
Then remove the laundry from the appliance and divide
the items to obtain two loads of approx. 3 kg each.
Do not use a dosing device/ball when carrying out a
washing & drying programme.
The water tap must be open and the drain hose must be
positioned in the sink or connected to the drain pipe.
1. Load the laundry.
1. Load the laundry.
2. Add detergent and fabric softener.
2. Turn the selector dial to “Dry” position in the
Cottons sector. The “Drying” light illuminates.
3. Switch the machine on by turning the selector dial
to the selected wash programme/fabric.
3. Depress the “Drying Time” button until the time
4. Select the drying time.
you want appears on the display.
5. Select the required options by means of the relevant
buttons. If possible, do not select a spin speed lower
than that proposed by the appliance to avoid a too
long drying time so saving energy.
Attention!
If you select a drying time longer then 55’ minutes,
after 3 seconds, the display will show the time in
hours and minutes (see the exemple below).
In any case the reduction of the spin speed is only
possible after selecting drying. The lowest values
with timed drying you can select are the following:
- 900 r.p.m. for cottons
Exemple:
- 700 r.p.m. for synthetics
60
1.00
Time
Time
6. Start the programme by depressing the
“Start/Pause” button.
Drying
Time
Drying
Time
7. At the end of the programme Turn the selector dial
to the “O” Off position to switch the machine off.
8. Remove the laundry.
4. Press the “Start/Pause” button to start the
ATTENTION!
programme. The pilot light “Function” illuminates.
When automatically washing and drying cotton and
synthetic items (washing & drying programme) do not
select the “Easy Iron”
option. If you select this
Start/
Pause
option, the washer -dryer performs a short and gentle
spin, which leaves the laundry, at the end of the
washing programme, too dump so it will be necessary a
too long drying time.
5. At the end of the programme, the pilot lights
“Function” and t “Drying” go off and the “End
cycle ” illuminates.
Turn the selector dial to the “O” Off position to
switch the machine off.
6. Remove the laundry.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing and Drying Hints
●
Do NOT overload the machine. Weigh the laundry the
Some stains such as fruit, wine, grass, rust etc. are
first few times you use the appliance.
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre-
soak product or biological detergent.
The average weights of the most common items are
listed below as a guide:
1000g = 1 kg
●
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Pillow case
Tablecloth
Serviette
●
●
●
Do not leave the damp laundry load in a heap too
long before drying.
Tea towel
70-120 g
Linen hand towel
Towelling hand towel
Towelling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
Avoid drying dark clothes with light coloured fluffy
items such as towels as these can attract the fluff.
If you overdry the laundry, besides wasting energy,
any subsequent ironing may become more difficult
because the fabric could be heavily crumpled.
Man’s shirt
Apron
●
●
Remove the laundry when the appliance has finished
drying.
To avoid a static charge when drying is completed,
use either a fabric softener when you are washing the
laundry or a fabric conditioner specifically for
tumble dryers.
●
Load the laundry loosely alternating large items with
small ones.
●
Particularly delicate items such as synthetic curtains,
woollen and silk, garments with metal inserts, nylon
stockings, bulky garments such as anoraks,
bedcovers, quilts, sleeping bags and duvets must not
be machine dried.
●
●
●
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they may
unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
●
●
Garments padded with foam-rubber or materials
similar to foam-rubber must not be machine dried;
they represent a fire hazard.
●
●
●
When washing curtains, remove the hooks.
Also, fabrics containing residues of setting lotions or
hair sprays, nail solvents or similar solutions must
not be machine dried in order to avoid the formation
of harmful vapours.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
●
●
For drying, follow the indications given on the
manufacturer’s labels.
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
May be tumble dried
●
●
●
White items should not be washed with coloured
items.
Drying at high temperature
Drying at reduced temperature
Do not tumble dry
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
Important:
As a dryer, the machine works on the condensation
principle.
●
●
Use the correct quantities of detergent.
For wool, use gentle detergent only in small
quantities.
Therefore, the water tap must be open and the
drain hose must drain water into a sink or into
the drain pipe, even during the drying cycle.
●
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
And in which form?
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
Which detergent?....
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
the machine immediately upon placing the
detergent in the dispenser drawer.
WHITES
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
, start
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
NON BIOLOGICAL
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which
should be placed on top of the laundry, and at the back
of the machine drum.
COLOURS
For coloured items you should use a
detergent which is designed to clean
while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
DELICATE ITEMS
FABRIC CONDITIONERS
These are ideal for improving ‘softness’, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
When washing delicates such as
woollens, you should use a product
which is specially designed to care for
fine fabrics.
Dreft Automatic is suitable for
woollens and other delicates.
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
LAUNDRY BLEACH
For additional stain removal you may
wish to use a product such as Ace
Gentle Bleach which is used in addition
to your chosen detergent. Ace is
suitable for all washable fabrics
including silks, woollens and colours.
marked with the symbol
.
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
FABRIC
White Cotton or Linen
without Special Finishes
Normal (Maximum)
95
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
Normal (Maximum)
60
50
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
Reduced (Medium)
Normal (Maximum)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
40
40
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Reduced (Medium)
Much Reduced (Minimum)
Hand wash only
Wool, wool mixtures, Silks
Do not machine wash
BLEACHING
Chlorine bleach may be used
IRONING
Cotton, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Hot iron
Warm iron
Cool iron
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
with high heat setting
with low heat setting
May be tumble dried
A cross through any symbol means «DO NOT»
X
Important Notes
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Consumptions*
Programme/
Max load
Fabrics
Available options
Type of laundry
Water
temperature
Energy kWh
litres
Spin reduction/
Easy Iron
1/2 Load Autodry,
Prewash, Quick,
Extra rinse
Sheets, household
linen, towels,
tablecloths
95°
White
cotton
55
2.2
6 Kg
Cottons
Spin reduction/
Easy Iron
1/2 Load Autodry,
Prewash, Extra
rinse
White
Sheets, household
linen, towels,
tablecloths
E60° Cottons
Economy
cotton and
fast
52
52
6 Kg
1.14
1.2
coloured
Spin reduction/
Easy Iron
example hand towels, 1/2 Load Autodry,
Fast coloured and
non-fast items, for
60° - 50° -
40°- 30°
White and
coloured
cotton
6 Kg
sheets, underwear,
tablecloths, shirts
Cottons
Prewash, Quick,
Extra rinse
Spin reduction/
Easy Iron
Prewash, Quick,
Extra rinse
60° - 50°-
40°- 30°
Shirts, blouses,
underwear, mixed
fabrics
2.5 Kg
Synthetics
0.85
0.5
50
55
Synthetics
Acrylic, viscose,
polyester items,
curtains
40° - 30°
Delicates
Delicates
Wool
Prewash, Quick,
Extra rinse
2.5 Kg
2 kg
Garments bearing the
“ Pure new wool,
non-shrink, machine
washable” or “Hand
wash” label
40° - 30° -
Wool
Spin reduction/
60
0.4
The “E60° Cottons ” is the reference programme for the data entered in the energy label, in compliance with EEC
92/75 standards.
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type
of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest
temperature provided for each programme.
Note! For the duration of the programmes, please refer to the display on the control panel.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Special programmes
Consumptions*
Programme
description
Max load
Programme
Available options
Water
Energy kWh
litres
Soak for about 20
minutes at 30°C
Stop with water in the
tub (Rinse Hold).
Soak 30
6 Kg
0.5
22
Spin reduction/
Easy Iron
3 rinses
Long spin at max.
speed
Rinses
6 Kg
6 Kg
0.06
-
52
21
Extra rinse
1 rinse with liquid
additive
Long spin at max.
speed
Spin reduction/
Easy Iron
Softener
Drain
For emptying out the last
rinse of the programmes
with “Rinse hold”
or at the end of the
programme “Soak 30”
Water draining
-
6 Kg
-
-
Drain and long spin at
max. speed**
Spin
Spin reduction
-
43
-
6 Kg
-
Mini 30°
Wash at 30°C
2 rinses
Short spin
2.5 Kg
0.35
Short cycle for lightly
soiled fabrics
For cancelling the
programme which is
running or to switch
the machine off
-
-
“ ” Off / Reset
O
** You can reduce the spin speed by means of the relevant button to adapt it to the fabrics to be spun.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Drying Programmes
Timed drying
Degree of drying
Type of fabric
Max. load
Spin speed
Drying time mins
3 kg
1.5 kg
3 kg
90
50
80
40
1600
1600
1600
1600
Extra dry
Ideal for
towelling
materials
Cotton and linen
(bathrobes, bath
towels, etc.)
Cotton and linen
(towels, T-shirts,
bathrobes)
Store dry (*)
Suitable for items
to put away
1.5 kg
without ironing
Synthetics and mixed
fabrics (jumpers,
blouses, underwear,
household linen)
2,0 kg
1,0 kg
900
900
75
40
1600
1600
65
35
3 kg
Iron dry
Suitable for
ironing
Cotton and linen
(sheets, tablecloths,
shirts, etc.)
1.5 kg
(*) The Store dry drying programme for cotton is the reference programme for the Energy Label data, in compliance
with EC directive 92/75.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
Flush it out under a tap, to remove any traces of
accumulated powder.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
C0067
C0066
To aid cleaning, the top part of the additive compartment
should be removed.
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Maintenance Wash
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
C0068
P1086
Cleaning the drawer recess
To run a maintenance wash:
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
●
The drum should be empty of laundry.
●
Select the hottest cotton wash programme.
●
Use a normal measure of detergent, must be a
powder (such as Ariel Futur).
External cleaning
Clean the exterior cabinet of the appliance with a
solution of mild washing up liquid and water and then
dry thoroughly.
Cleaning the dispenser drawer
P0038
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by pressing the catch downwards
and by pulling it out.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
• Put the cap back on the emergency emptying hose and
place the latter back in its seat.
Cleaning the pump
The pump should be inspected if
• the machine does not empty and/or spin
• the machine makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump.
Proceed as follows:
• Disconnect the appliance.
• If necessary wait until the water has cooled down.
• Open the pump door.
P1117
• Screw the pump cover fully in.
• Close the pump door.
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle,
always wait until the appliance has finished the cycle,
and is empty. When replacing the cover, ensure it is
securely retightened so as to stop leaks and young
children being able to remove it.
P1114
• Place a container close to the pump to collect any
spillage.
• Pull out the emergency emptying hose, place it in the
container and remove its cap.
• When no more water comes out, unscrew the pump
cover and remove it. Always keep a rag nearby to dry
up spillage of water when removing the cover.
Cleaning the water inlet filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
P1115
• Remove any objects from the pump impeller by
rotating it.
P1090
20
Download from Www.Somanuals.com. All Manuals Search And Download.
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
●
Turn off the water tap.
●
Unscrew the inlet hose.
●
Place the end of the emergency emptying hose and
that of the inlet hose in a bowl placed on the floor
and let water drain out.
●
Screw the water inlet hose back on and reposition
the emergency emptying hose after having put the
cap on again.
●
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
Important!
Every time you drain the water through the emergency
emptying hose you must pour 2 litres of water into the
main wash compartment of the detergent drawer and
then run the drain programme. This will activate the
ECO valve avoiding that part of the detergent remains
unused at next washing.
Emergency emptying out
If the water is not discharged, proceed as follows to
empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the pump door;
• place a bowl on the floor and place the end of the
emergency emptying hose into the bowl. Remove its
cap. The water should drain by gravity into the bowl.
When the bowl is full, put the cap back on the hose.
Empty the bowl. Repeat the procedure until water
stops flowing out;
• clean the pump if necessary as previously described;
• replace the emergency emptying hose in its seat after
having plugged it;
• screw the pump cover again and close the door.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed
below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that one of the following alarm codes appears on the display:
E 10
E 2 0
E 40
-
-
-
: problem with the water supply
: problem with water draining
: door open
Once the problem has been eliminated, press the “Start/Pause “button to restart the programme. If after all checks, the
problem persists, contact your local Service Force Centre.
Symptom
Possible causes
●
E 40
)
The machine does not start
The door has not been closed. (
●
The plug is not properly inserted in the power socket.
There is no supply at the socket.
The main fuse or the fuse in the plug has blown.
The “Start/Pause” button has not been depressed.
●
●
●
●
●
●
●
E 10
The water tap is closed. (
The filter in the inlet hose is blocked. (
The inlet hose may be squashed or kinked. (
)
The machine does not fill
E 10
)
E 10
)
E 40
The door has not been closed. (
)
●
●
●
The machine fills then empties
immediately
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
●
●
E 2 0
)
The machine does not empty and/or
does not spin
The drain hose may be squashed or kinked. (
The “Rinse Hold” option has been selected.
●
E 2 0
The drain pump may be blocked. (
)
●
The drain hose extension, if fitted, is not correct. Follow the
instructions for connecting to the waste.
●
●
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum to
allow the machine to spin.
●
●
There is water on the floor
Too much detergent or unsuitable detergent has been used (creates too
much foam).
Check whether there are any leaks from the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if
it is damp.
●
●
●
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
The cap on the emergency emptying hose has not been replaced after
●
cleaning the pump.
●
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
Unsatisfactory washing results
●
●
●
Stubborn stains have not been treated prior to washing
The correct wash programme/temperature has not been selected.
Too much laundry has been placed in the drum.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible causes
●
The machine vibrates when spinning
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not level and stable (check diagonally).
The washing load is badly distributed in the drum.
●
●
●
●
Maybe there is very little laundry in the drum.
●
The door will not open
The water level is above the bottom edge of the door.
The machine is heating the water or drying the clothes.
The drum is turning.
●
●
●
The electronic balance control device has cut in because the laundry is
Spinning starts late or the machine
does not spin
not evenly distributed in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen several times before the
unbalance disappears and normal spinning can resume. If, after a few
minutes, the laundry is still not evenly distributed in the drum, the
machine will spin at a lower spin or will not spin. In this case,
redistribute the load manually and select the spin programme.
●
The machine makes an unusual
noise
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
●
No water is visible in the drum
Machines based on modern technology operate very economically
using very little water without affecting performance.
●
The machine does not dry or does
not dry properly
The drying time has not been selected
●
E 10
E 2 0
)
The water tap is not turned on (
The drain pump is clogged (
)
●
●
●
●
The machine is overloaded
The selected drying time was not suitable for the laundry
A drying programme has been selected in the wrong sector
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture)
0870 5 929929
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
For the address of your local Service Force Centre and
further information about Service Force, please visit the
For Customer Service in Ireland please contact us at the
address below:
5. The purchase date.
Please note that a valid purchase receipt or
guarantee documentation is required for in-
guarantee service calls.
Zanussi Electrolux - Electrolux Group (Irl) Ltd
Long Mile Road - Dublin 12
Republic of Ireland
Tel: +353 (0)1 4090751
P
r
o
M
o
d
.
N
d
.
.
.
.
.
.
.
.
.
.
.
o
. . . . . . . . . .
.
S
e r
.
N
.
o
. . . . . . . . .
.
Email: [email protected]
Mod. ..........
To buy accessories, consumables and spare parts at
electrolux.co.uk
Prod. No. ...........
Ser. No. .........
P0042 BD
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Care Department - Zanussi/Electrolux
Major Appliances
Addington Way, Luton
Bedfordshire
LU4 9QQ
Tel 08705 727727*
Customer Care
For general enquiries concerning your Zanussi
Electrolux appliance or for further information on
Zanussi Electrolux products, please contact our
Customer Care Department by letter or telephone at the
* calls to this number may be recorded for training
purposes.
Guarantee Conditions
●
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
Standard guarantee conditions
We, Zanussi Electrolux, undertake that if, within 12
months of the date of the purchase, this ZANUSSI
ELECTROLUX appliance or any part thereof is proved
to be defective by reason only of faulty workmanship or
materials, we will, at our option repair or replace the
same FREE OF ANY CHARGE for labour, materials or
carriage on condition that:
●
Products of Zanussi Electrolux manufacture which
are NOT marketed by Zanussi Electrolux.
European guarantee
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
●
The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
The guarantee starts from the date you first
purchased your product.
●
●
The appliance has been used for normal domestic
purposes only, and in accordance with the
manufacturer’s instructions.
The guarantee is for the same period and to the same
extent for labour and parts as exists in the new
country of use for this brand or range of products.
●
●
The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
The guarantee relates to you and cannot be
transferred to another user.
●
●
All service work under this guarantee must be
Your new home is within the European Community
(EC) or European Free Trade Area.
●
undertaken by a Service Force Centre.
●
Any appliance or defective part replaced shall
The product is installed and used in accordance with
our instructions and is only used domestically, i.e. a
normal household.
●
become the Company’s property.
●
This guarantee is in addition to your statutory and
other legal rights.
The product is installed taking into account
regulations in your new country.
●
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
Exclusions
This guarantee does not cover:
France
Germany
Italy
Senlis
+33 (0) 344 62 29 29
+49 (0) 800 234 7378
+39 0434 39 4700
●
Damage or calls resulting from transportation,
Nurnberg
Pordenone
Stockholm
Luton
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
Sweden
UK
+46 (0) 8 672 53 90
+44 (0) 8705 727 727
+353 (0)1 4090751
●
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
Ireland
Dublin
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Should the appliance power supply cable need to
be replaced, this should be carried out by our
Service Force Centre.
Technical Specifications
DIMENSIONS
Height
Width
Depth
85 cm
60 cm
59 cm
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
230-240 V/50 Hz
2050 W (10A)
Minimum
Maximum
0.05 MPa
0.80 MPa
WATER PRESSURE
Washing
MAX LOAD CAPACITY
Cotton, linen
Synthetics
Delicate fabrics
Wool/Handwash
Drying
6.0 kg
2.5 kg
2.5 kg
2.0 kg
Cotton, linen
Synthetics
3.0 kg
2.0 kg
SPIN SPEED
Maximum
1200 rpm
CONSUMPTION DATA FOR WASHING
6 KG NORMALLY SOILED COTTON
ITEMS WITH “E60°” PROGRAMME
Energy
Water
Time
1.14 kWh
52 litres
138 mins
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Fill all the holes with the plastic plugs supplied with the
instruction booklet.
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using a spanner unscrew and remove the two rear
bottom screws. Slide out the two plastic pins.
P1128
P0002
Lay the machine gently on its back, making sure that the
hoses are not squashed.
Important !
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
In case of moving out the same precautions as per
paragraphe “The dangers of freezing” must be taken
i.e. the residual water in the hoses must be pumped out.
P0001
P1129
Positioning
Install the machine on a flat hard floor.
Remove the polystyrene block from the bottom of the
machine and release the two plastic bags.
Very carefully slide out the left polythene bag, removing
it towards the right and then downwards.
Make sure that air circulation around the machine is not
impeded by carpets, rugs etc. Check that the machine
does not touch the wall or other kitchen units.
Never place cardboard, wood or similar materials under
the machine to compensate for any unevenness in the
floor.
1
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible
with the plumbing of the existing installation, a variety
of connectors are available from good hardware stores
and plumbers merchants to suit most domestic
plumbing. Any alteration to your existing plumbing
must be carried out by a competent person, or qualified
plumber.
2
3
P1124
P1126
Repeat the operation for the right polythene bag,
removing it towards the left and then upwards.
Installation on a Suspended Floor
Suspended wooden floors are particularly susceptible to
vibration. To help prevent vibration we recommend you
place a waterproof wood panel, at least 15 mm thick
under the appliance, secured to at least 2 floor beams
with screws. If possible install the appliance in one of
the corners of the room, where the floor is more stable.
P1127
Remove the polystyrene base.
Set the machine upright and unscrew the remaining rear
screw. Slide out the relevant pin.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Water inlet
Connect the hose supplied with the machine to a tap
with a 3/4” thread.
Do not use already employed hoses.
U piece
supplied
P1199
Place the drain hose into your standpipe, which should
have an internal diameter of approximately 38mm thus
ensuring there is an air break between the drain hose
and standpipe.
P1088
38 mm (11.2)
standpipe
diameter
Installation should comply with local water authority
and building regulations’ requirements.
The appliance must be connected to a cold water
supply only.
A minimum water pressure of 0.05 MPa (0.5 bar) is
required for safe operation of the appliance.
P1200
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
When discharging into a standpipe ensure that the top of
the standpipe is no more than 90cm (35.4'') and no less
than 60cm (23.6'') above floor level.
There should be a minimum distance of 5.02m
(161/2 ft) between the appliance’s inlet and the bottom
of the water storage tank.
3 pin
Set the hose correctly by loosening the ring nut. After
positioning the inlet hose, be sure to tighten the ring nut
again to prevent leaks.
P1201
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
P0021
If your drain hose looks like this (see below) you do not
require the “U” piece”. Just push the hose firmly into
the standpipe.
Water drainage
This appliance is designed to be permanently plumbed
into your home's drainage system using one of the
following methods.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
P1212
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Onto a sink outlet spigot.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
P1051
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
P1197
Some vibration is inevitable, especially if mounted on a
wooden floor.
Push the drain hose onto the spigot and secure with a
clip if required, ensure a loop is formed in the drain
hose (see diagram) to prevent waste from the sink
entering the washing machine.
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
Special conditions
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
Loop
P1198
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
Warning
The machine should NOT be placed on deep pile
carpeting.
Note
Important
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
●
Before connecting the machine to new pipework or
to pipework that has not been used for some time,
run off a reasonable amount of water to flush out any
debris that may have collected in the pipes.
In the interest of the environment
For a correct functioning of the machine the drain
●
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
hose must be hooked on the proper support piece
situated on the top of the back side of the appliance.
Levelling
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable (check diagonally).
If you require any further advice please contact your
local water authority.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
Brown
SHOWER
SINK TOILET
GREEN & YELLOW
BATH
BIDET
E
WASHING
MACHINE
L
DISHWASHER
N
RAINWATER
'RUN-OFF'
BROWN
FOUL DRAIN
BLUE
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
CORD CLAMP
P1041
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
TREATED
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
DISCHARGE
RIVER
RIVER
earth symbol
or coloured green and yellow.
P0987
The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
WARNING:
The manufacturer declines any liability should
this safety measure not be observed.
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely. Should the appliance power supply
cable need to be replaced, this must be carried
out by our Service Force Centre.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
Note
When the appliance is installed the power supply cable
must be accessible.
P
r
M
o d .
N
o d
.
. . . . . . . . . .
o
. . . . . . . .
.
S e
. . .
r
.
N
o
. . . .
.
. . . . .
Permanent connection
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042 BD
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
The switch must not break the yellow and green earth
cable at any point.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum
cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150
countries around the world.
© Electrolux plc 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
|