WASHER-DRYER
ZWD 1270 W
ZWD 1270 S
ZWD 1470 W
Delay
Z
W
D
1
2
7
O
W
Cottons
Prewash
Extra Dry
Cottons
Synthetics
Delicates
Wool
95°C
60°C
50°C
40°C
30°C
1200
900
700
500
Prewash
Store Dry
Wash
Rinse
Spin
Drain
40° AA
Iron Dry
Cottons
Synthetics
Store Dry
On/Off
Skip
Synthetics
Extra Quick
Hand
W
ash
Rinse Hold
P
R
O
G
R
E
S
S
1
2
0
0
H
Y
D
R
O
S
Y
S
T
E
M
5
.
5
k
g
Drying
Reset
Start/Pause
Auto Dry Drying Time
Fabrics
Temperature Spin Speed
Options
GB
INSTRUCTION BOOKLET
132989240
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Maintenance and Cleaning
Descaling
20-21
20
For the User
After each wash
Maintenance wash
External cleaning
20
20
20
Important Safety Information
Your New Washer-Dryer
2
4
Description of the Appliance
Detergent dispenser drawer
Child safety feature
5
5
5
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the pump
Cleaning the water inlet filter
The dangers of freezing
Emergency emptying out
20
20
20-21
21
The Control Panel
Operating sequence
6-10
21
21
11-14
Washing
Load the laundry
11
11
11
11
11
11
12
12
12
12
12
13
13
Something Not Working
Service and Spare Parts
Guarantee Conditions
22-23
23
Measure out the detergent
Measure out the fabric softener
Switch the machine on
Select the required programme/fabric
Select the temperature
Select the spin speed or the “Rinse Hold” option
Select the desired options
Select the “Delay”
24
For the Installer
Installation Instructions
Technical Specifications
25
25
Start the programme
How to change a programme during its cycle
How to cancel a programme during its cycle
How to open the door during the cycle of
a programme
Unpacking
Positioning
26
26
Water inlet
27
13
13
Water drainage
Levelling
27-28
28
End of programme
Special conditions
In the interest of the environment
Electrical connection
28
28
29
Drying 2.75 kg of cotton
14
14
Autodrying 2 kg of synthetics
Washing and Drying Hints
Which detergent to use?....
And in which form?
15
16
16
Wash Care Symbols
Washing Programmes
Drying Programmes
17
18
19
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Your New Washer-Dryer
This new machine meets all modern requirements for effective treatment of laundry with low
water, energy and detergent consumption.
●
The special wool programme with its new delicate
In the interest
wash system treats your woollens with extreme care.
of the environment
●
The balance control device ensures that the
machine remains stable when spinning.
●
Materials marked with the symbol
recyclable.
are
●
Automatic cooling of the wash water to 60°C
before draining, with the 95°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
●
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
●
●
The ECO valve allows total use of detergent and
reduces water consumption so saving energy.
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
The two drying programmes will give your wash
that soft, relaxed feel whatever the weather.
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
Ecological hints
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
How do we help to protect the environment?
We use recycled paper!
●
Adjust the quantity of detergent according to the
hardness of your water supply, the amount of
laundry and the degree of soiling.
●
Select the “Extra Quick” programme for lightly
soiled laundry.
●
A programme without prewash is sufficient for
normally soiled laundry.
●
Try to load the maximum drying capacity of the
machine as small loads are uneconomical.
●
Always load well spun laundry. The higher the spin
speed, the lower the electricity consumption and the
shorter the drying times.
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed "Something
Not Working".
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the Appliance
1 Detergent dispenser drawer
2 Control Panel
2
1
3 Door opening handle
4 Drain pump
Delay
ZWD 127O
W
Cottons
Extra Dry
Prewash
Cottons
Synthetics
Delicates
Wool
95°C
60°C
50°C
40°C
30°C
1200
900
700
500
Prewash
Wash
Rinse
Spin
Drain
Store Dry
Iron Dry
5 Adjustable feet
40° AA
Cottons
Synthetics
Store Dry
Skip
On/Off
Synthetics
Extra Quick
Hand Wash
Rinse Hold
P
R
O
G
R
E
S
S
1200
HYDROSYSTEM 5.5 kg
Drying
Reset
Start/Pause
Drying Time
Auto Dry
Fabrics
Temperature Spin Speed
Options
3
4
5
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
C0063
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
P1131
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel
Delay
ZWD 127O W
Cottons
Extra Dry
Prewash
40° AA
Cottons
Synthetics
1200
900
700
500
Prewash
Wash
Rinse
Spin
Drain
95°C
60°C
50°C
40°C
30°C
Store Dry
Iron Dry
Delicates
Wool
Hand Wash
Cottons
Synthetics
Store Dry
Skip
On/Off
Synthetics
Extra Quick
Rinse Hold
Drying
Reset
Start/Pause
Drying Time
Auto Dry
Fabrics
Temperature Spin Speed
Options
1
2
3
4
5
6
7
8
9 10
11 12 13
1 On/Off button
Important!
Press this button to switch the machine on. The display
(9) will show three blinking dashes or a blinking zero.
You will find more detailed explanations on page 7 and 8
(see “DISPLAY”).
Press the “On-Off” button again to switch the machine
off.
By pressing the “Temperature” and “Spin Speed”
buttons simultaneously for 3 seconds, the acoustic
signal is deactivated at the end of the cycle, when
selecting the programmes and in case of an incorrect
option selection.
By pressing these 2 buttons again the acoustic signal is
reactivated.
2 MAINS-ON light
This light is connected to the “On/Off” button. It lights
up when you press the button, and goes out when you
press it again.
5 “Spin Speed” button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the machine. The relevant
light will light up.
3 “Fabrics” button
Maximum speeds are:
Press this button repeatedly to select the programme on
the basis of the type of laundry to be washed. The light
relevant to the selected programme will light up. The
machine will propose a temperature and automatically
select the maximum spin value provided for the
programme you have chosen. You can change these
values by operating buttons 4 and 5.
• for cotton: 1,400 (ZWD 1470 W)
1,200 rpm (ZWD 1270 W - 1270 S) ;
• for synthetic fabrics, wool, and fabrics to be hand-
washed: 900 rpm;
• for delicate fabrics: 700 rpm.
“Rinse Hold” position : when you choose this option,
the machine will not drain the water of the last rinse, so
as not to crease the laundry.
Hand Wash
When you select this programme, you obtain a
particularly delicate wash, suitable for articles of
clothing whose label indicates that they must be hand-
At the end of the cycle, the “Start/Pause” button light
will flash, to indicate that the water must be drained and
a static zero will appear on the display.
To complete the cycle, choose one of the following
options:
washed
.
4 “Temperature” button
• Draining and spin:
- Press the “Start/Pause” button. The machine will
drain the water, then spin the laundry at the
maximum speed provided for the selected
programme.
- Select spin speed by means of button 5, and press
the “Start/Pause” button.
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
machine. The relevant light will light up.
Maximum temperatures are 95°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed (Hand Wash programme).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
• Drain only
7 “Auto Dry” button
This button allows you to choose the required degree of
drying for cottons and synthetics:
- Press the “Skip/Reset” button once, so as to cause
the “Drain” light to light up, then press the
“Start/Pause” button.
- Extra dry (only for cottons)
- Store dry (cottons and synthetics)
- Iron dry (only for cottons)
Important! If you accidentally press the “Start/Pause”
button more than once, the display will show three
blinking dashes. To cause the washing machine to
drain the water, select any washing programme by
means of the “Fabric” button, then press
The drying time is automatically adjusted by the
machine: the laundry will be dried to the selected degree
of dryness.
“Skip/Reset” three times in order to select the
“Drain” position (only the “Drain” light will remain
lit).
The Rinse Hold option cannot be selected for the
automatic WASHING & DRYING programme.
8 “Drying Time” button
By depressing this button you can select a timed
programme for cotton or synthetics, the relevant light
illuminates. To select “cottons” you have to push the
button for about 2 seconds. To select the drying time
push the button until the time you want appears in the
display according to the fabrics (cotton or synthetics)
you have to dry.
6 OPTIONS button
Press this button to select the following options:
• Prewash: select this option if you wish your laundry
to be prewashed before the main wash (not available
for wool and hand-wash cycle).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
- For COTTON you can select a drying time from 10
minutes to 130 minutes (2 .10).
- For SYNTHETICS you can select a drying time from
10 minutes to 100 minutes (1.40).
Every time you press the button the time increases by
5 mins.
40° AA: this option can be selected for cottons and
synthetics lightly or normally soiled with a
temperature of 40°C or higher.
If you select 40°C together with option 40 AA, the
machine will prolong the time at 40°C in the washing
phase. On cotton programme this will allow an A class
in energy efficiency and washing performance to be
achieved.
9 Display
The following pieces of information are shown on the
display:
• Three blinking dashes, when a programme is
cancelled by means of the “Skip/Reset” button.
If you select 95°C, 60°C or 50°C and press the 40 AA
button, the washing temperature will be reduced and
the washing time will be prolonged.
The three blinking dashes will also appear when you
press the “On/Off” button to switch the machine on, if
the previously selected cycle has been erased.
• “Extra Quick”: select this option for laundry that is
only slightly soiled (not for wool and Hand Wash
programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
---
The “Prewash”, the “40 AA” and “Extra Quick” options
cannot be selected together.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Important!
Duration of washing programme in hours
and minutes, after you have selected a programme.
The first time you use the machine, when you switch
it on, it may display a blinking zero and give an audible
warning signal. This is due to the fact that the machine
has performed a washing cycle during the
manufacturer’s inspection tests, and this cycle has not
been erased after its completion.
2.05
• Delay start, a time value indicated in hours and
selected by means of the relevant button.
While the programme is running (after you have
pressed the “Start/Pause” button), the displayed time
value decreases by one unit every minute.
• Selected drying time in minutes or hours and
minutes.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the “Start/Pause” button, the
countdown begins, and the delay time value decreases
by one unit every hour.
1.25
You can delay the start of the selected programme by
up to 24 hours in one hour intervals.
After the programme has started the time remaining is
updated every minute.
• An incorrect option selection has been made: this is
indicated by the message Err when a function
incompatible with the current programme is selected.
• The washing machine has stopped with water in
the tub, at the end of a programme with the “Rinse
Hold” option: this is indicated by a static zero.
• The washing machine has completed the
programme: this is indicated by a blinking zero. At
the same time. The zero will reappear when you
switch the washing machine on, unless the previous
programme has been erased by means of the
Skip/Reset button.
The incorrect selection is also indicated by an audible
warning signal.
• An alarm code indicates a fault in the machine
operation (see the relevant chapter on page 22-23).
0
E20
8
Download from Www.Somanuals.com. All Manuals Search And Download.
10 “Start/Pause” button
This button has three functions:
Prewash
Wash
• Start: after you have selected the desired programme
and options, press this button to start the machine. The
light above the button will stop flashing and remain lit.
Rinses
Spin
Drain
If you have selected a delay time by means of button
12, the countdown will begin and will be shown on
the display.
Drying
To select rinse & spin, press the “Skip” button once,
the wash LED goes out.
• Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the
programme, press the button again.
Prewash
Wash
Important! You must set the washing machine to
PAUSE before you make any change in the programme
in progress.
Rinses
Spin
Drain
• Draining of water and spinning after the execution
Drying
of programmes with the “Rinse Hold” option.
To select spin only, press the “Skip” button twice.
The wash & rinse LED,s go out.
11 “Skip/Reset” button
This button performs two functions:
Prewash
Wash
- Clears the memory
- Selects special programmes
Rinses
Spin
At the end of every programme the “Reset” button must
be pressed once or repeatedly to clear the programme
memory. This will be confirmed by three dashes,
flashing in the display.
Drain
Drying
If the previous programme is not cleared, the display
will show a “0” flashing and an audible signal will
sound, when you switch the machine on.
To select Drain press the “Skip” button three times, the
wash - rinse - spin LED,s go out.
Selecting a special programme:
A wash programme must be selected in the normal way.
(“Start/Pause” button not pressed)
Prewash
Wash
Rinses
Spin
Drain
Drying
S
t
a
e
s
r
t
/
u
a
P
If you wish to cancel or advance the running
programme to the required phase, PAUSE the cycle and
then press the “Skip” button as previously described.
A normal wash cycle consists of the following phases,
Wash - Rinses - Spin and is confirmed by the
illumination of the corresponding LED,s.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
12 “Delay” button
13 Programme phase indicator
lights
When you select a programme, the lights relevant to the
phases that form the programme light up.
This button makes it possible to delay the starting of the
programme by up to 24 hours. The delay you have
selected is shown on the display for about 3 seconds;
afterwards, the duration of the programme reappears.
You must select this option after you have set the
programme and before you press the “Start/Pause”
button.
Prewash
Wash
Rinses
Spin
The time value shown on the display will decrease by
one unit every hour.
Drain
You can change the delay time at any moment,
before you press the “Start/Pause” button.
Drying
If you have already pressed the “Start/Pause” button,
and you wish to change or cancel the delay time,
proceed as follows:
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
• set the machine to PAUSE by pressing the
“Start/Pause” button;
• press the “Delay” button until the display shows the
desired delay time or
• press the “Delay” button once, to erase the delay time.
The display will indicate “0 h”.
• press the “Start/Pause” button again.
Important!
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
machine to PAUSE by pressing the “Start/Pause”
button. After you have closed the door, press the
“Start/Pause” button again.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Sequence
WASHING
4. Switch the machine on
Press the “On/Off” button to switch the machine on. The
display will show three blinking dashes or a blinking
zero. The light above the button will light up.
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
the detergent drawer in order to activate the
ECO valve. Then run a cotton cycle at 60°C, with the
machine empty, in order to remove any manufacturing
residue from the drum and tub.
of
/
f
0
Pour half a measure of detergent into the main wash
compartment and start up the machine.
---
1.Load the laundry
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
5. Select the desired programme/
fabric
Close the door.
Press the “Fabrics” button repeatedly, in order to select
the desired programme/fabric. The relevant light will
light up.
The lights relevant to the phases that form the
programme will light up.
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The “Start/Pause” button
light will start flashing.
P0004•N
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
main wash compartment
If you wish to carry out the prewash, pour detergent into
the appropriate compartment marked
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the execution of
the cycle.
.
.
Prewash
Wash
Cottons
Synthetics
3.Measure out the fabric
softener
Delicates
Wool
Hand Wash
Rinses
Spin
If required, pour fabric softener into the compartment
Drain
Drying
marked , without exceeding the «MAX» mark.
Fabrics
C0064
C0065
Close the drawer gently.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select the temperature
Press the “Temperature” button if you wish to select a
temperature value different from the one proposed by
the machine.
9. Select the “Delay”
Before you start the programme, if you wish the
start to be delayed, press the “Delay” button
repeatedly, or keep it pressed, to select the desired delay.
The selected delay time value (up to 24 hours) will
appear on the display for 3 seconds, then the duration of
the programme will appear again.
The relevant light will light up.
95°C
60°C
50°C
40°C
30°C
Delay
Temperature
7. Select the spin speed or the
Rinse Hold option
Press the “Spin Speed” button repeatedly, in order to
select the desired spin speed or the “Rinse Hold” option.
The relevant light will light up.
If you select the “Rinse Hold” option, the machine will
stop at the end of the programme with the water still in
the tub.
10. Start the programme
Press the “Start/Pause” button. The relevant light will
stop flashing and only the light relevant to the phase that
is in progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.
1200
900
700
500
Rinse Hold
Spin Speed
S
t
a
e
s
r
t
/
u
a
P
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the “Prewash” option.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the
“40° AA” option.
If your laundry is only slightly soiled, select the “Extra
Quick” option.
The relevant light illuminates.
Prewash
40° AA
Extra Quick
Options
12
Download from Www.Somanuals.com. All Manuals Search And Download.
After approximately 3 minutes, you can open the door.
11. How to change a programme
during its cycle
Before you make any change, you must pause the
machine by pressing the “Start/Pause” button.
It is possible to change any phase before the programme
carries it out.
Pay attention to the level and temperature of the
water in the machine!
When you close the door and press the “On/Off” button
again, the machine will resume the programme from the
point where it had been interrupted.
Changing the type of fabric or temperature is possible,
obviously, only during the washing phase. When you
make a change in these two parameters, the machine
will resume the cycle from the beginning.
14. End of programme
At the end of the programme, the machine stops
automatically, gives an audible signal, and displays a
blinking zero.
If it is necessary to drain the water in order to change the
programme in progress, proceed as follows:
If you had selected the “Rinse Hold” option, the
“Start/Pause” button light flashes to indicate that the
water must be drained. The display shows a steadily lit
zero.
When the programme has been completed, a blinking
zero appears on the display and the audible signal is
given.
• PAUSE the machine by pressing the “Start/Pause”
button;
• press the “Skip/Reset” button repeatedly, until only
the “Drain” light remains lit;
• press the “Start/Pause” button again.
When the water has been drained, the display shows a
blinking zero. You may now select a new programme
and press the “Start/Pause” button to start it.
Press the “Skip/Reset” button repeatedly to erase the
programme that has just been carried out. If you
omit to do this, the next time you switch the machine
on, the blinking zero will appear on the display and
you will hear the audible signal.
12. How to cancel a programme
during its cycle
To cancel a programme that is being carried out, first
pause the machine by pressing the “Start/Pause” button,
then press the “Skip/Reset” button repeatedly, until the
display shows three blinking dashes.
Note: when you switch the machine on, if you must
erase the previously performed programme, it is also
sufficient to press the “Fabrics” button and select a new
programme.
Press the “On/Off” button to switch the machine off.
The relevant light will go out.
Remove the laundry from the machine.
13. How to open the door during
the cycle of a programme
You can open the door, after having set the machine to
PAUSE, provided the following conditions exist:
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get damaged
in a subsequent wash (e.g. by shrinking) or bleed colour
into another load of laundry.
• the washing machine is not in the heating phase
beyond 55°C;
We advise you to close the water supply tap and
disconnect the plug from the socket.
• the level of the water is not high;
• the drum is not turning.
Leave the door ajar in order to air the machine.
If these requirements are met, when you pause the
machine the door can be opened.
Should it not be possible to open the door, and should it
be absolutely necessary to do so, switch the machine off
by pressing the “On/Off” button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5. At the end of the programme press “Skip/Reset”
button to clear the memory and switch the machine
off by depressing “On/Off” button.
DRYING 2.75 KG OF COTTON
You have for example just machine-washed and spun at
1200 rpm 5.5 kg of laundry.
They are cotton fabrics of medium weight which you
want to iron as soon as they are dry.
6. Remove the laundry.
Note:
Press the “Skip/Reset” button repeatedly to erase the
programme that has just been carried out,
will show in the display and switch the
The programme time will automatically increase by up
to 1 minute, this is quite normal.
---
machine off by depressing “On/Off” button.
Then remove the laundry from the appliance and divide
the items to obtain two loads of approx. 2.75 kg each.
AUTODRYING 2 KG OF SYNTHETICS
You intend to wash and dry automatically 2 kg of
synthetics which do not need ironing.
The water tap must be open and the drain hose must be
positioned in the sink or connected to the drain pipe.
Do not use a dosing device/ball when carrying out a
washing & drying programme.
1. Load the laundry.
2. Depress the “On/Off” button to switch the machine
on, --- will show in the display.
1. Load the laundry.
3. If you wish to carry out the electronic drying,
depress “Auto Dry” button until the light “Iron
Dry” illuminates.
2. Add detergent and fabric softener.
3. Switch the machine on by depressing the “On/Off”
button
.
Cottons
Extra Dry
4. Select the wash programme/fabric and temperature.
5. Select the drying time or degree of drying.
Store Dry
Iron Dry
Synthetics
Store Dry
6. Select the required options by means of the relevant
buttons. If possible, do not select a spin speed lower
than that proposed by the appliance to avoid a too
long drying time so saving energy.
Auto Dry
In any case the reduction of the spin speed is only
possible after selecting drying. The lowest values
you can select are the following:
- 900 r.p.m. for cottons & synthetics with electronic
drying
If you want a timed drying, depress the “Drying Time”
button until the light “Cottons” lights up, then depress
the same button until the time you want appears on the
display.
- 900 r.p.m. for cottons and 700 r.p.m. for synthetics
with timed drying
7. Start the programme by depressing the
“Start/Pause” button.
55
Cottons
8. At the end of the programme press the
SKIP/RESET button to clear the memory and press
the “On/Off” button again to switch the machine
off.
Synthetics
Drying Time
9. Remove the laundry.
4. Press the START/PAUSE button to start the
programme.
S
t
a
e
s
r
t
/
u
a
P
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing and Drying Hints
●
Do NOT overload the machine. Weigh the laundry the
Some stains such as fruit, wine, grass, rust etc. are
first few times you use the appliance.
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre-
soak product or biological detergent.
The average weights of the most common items are
listed below as a guide:
1000g = 1 kg
●
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Pillow case
Tablecloth
Serviette
●
●
●
Do not leave the damp laundry load in a heap too
long before drying.
Tea towel
70-120 g
Linen hand towel
Towelling hand towel
Towelling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
Avoid drying dark clothes with light coloured fluffy
items such as towels as these can attract the fluff.
If you overdry the laundry, besides wasting energy,
any subsequent ironing may become more difficult
because the fabric could be heavily crumpled.
Man’s shirt
Apron
●
●
Remove the laundry when the appliance has finished
drying.
To avoid a static charge when drying is completed,
use either a fabric softener when you are washing the
laundry or a fabric conditioner specifically for
tumble dryers.
●
Load the laundry loosely alternating large items with
small ones.
●
Particularly delicate items such as synthetic curtains,
woollen and silk, garments with metal inserts, nylon
stockings, bulky garments such as anoraks,
bedcovers, quilts, sleeping bags and duvets must not
be machine dried.
●
●
●
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they may
unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
●
●
Garments padded with foam-rubber or materials
similar to foam-rubber must not be machine dried;
they represent a fire hazard.
●
●
●
When washing curtains, remove the hooks.
Also, fabrics containing residues of setting lotions or
hair sprays, nail solvents or similar solutions must
not be machine dried in order to avoid the formation
of harmful vapours.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
●
●
For drying, follow the indications given on the
manufacturer’s labels.
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
May be tumble dried
●
●
●
White items should not be washed with coloured
items.
Drying at high temperature
Drying at reduced temperature
Do not tumble dry
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
Important:
As a dryer, the machine works on the condensation
principle.
●
●
Use the correct quantities of detergent.
For wool, use gentle detergent only in small
quantities.
Therefore, the water tap must be open and the
drain hose must drain water into a sink or into
the drain pipe, even during the drying cycle.
●
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
And in which form?
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
Which detergent?....
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
the machine immediately upon placing the
detergent in the dispenser drawer.
WHITES
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
, start
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
NON BIOLOGICAL
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which
should be placed on top of the laundry, and at the back
of the machine drum.
COLOUREDS
For coloured items you should use a
detergent which is designed to clean
while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
DELICATE ITEMS
FABRIC CONDITIONERS
These are ideal for improving ‘softness’, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
When washing delicates such as
woollens, you should use a product
which is specially designed to care for
fine fabrics.
Dreft Automatic is suitable for
woollens and other delicates.
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
LAUNDRY BLEACH
For additional stain removal you may
wish to use a product such as Ace
Gentle Bleach which is used in addition
to your chosen detergent. Ace is
suitable for all washable fabrics
including silks, woollens and coloureds.
marked with the symbol
.
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
FABRIC
White Cotton or Linen
without Special Finishes
Normal (Maximum)
95
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
Normal (Maximum)
60
50
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
Reduced (Medium)
Normal (Maximum)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
40
40
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Reduced (Medium)
Much Reduced (Minimum)
Hand wash only
Wool, wool mixtures, Silks
Do not machine wash
BLEACHING
Chlorine bleach may be used
IRONING
Cotton, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Hot iron
Warm iron
Cool iron
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
with high heat setting
with low heat setting
May be tumble dried
A cross through any symbol means «DO NOT»
X
Important Notes
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Type of
Consumption*
laundry and
symbols on
labels
Programme/ Description of
Load
Available options
Energy
kWh
Water
litres
Time
h/min.
temperature
programme
60
95
5,5 kg
Cottons
60°-95°C
Main wash at
60°-95°C
3 rinses
SPIN SPEED
RINSE HOLD
PREWASH
40° AA
EXTRA QUICK
1.9
57
2.19
White cotton:
e.g. sheets,
tablecloths,
household
linen
Long spin
60
40
30
5,5 kg
SPIN SPEED
RINSE HOLD
PREWASH
40° AA
EXTRA QUICK
Cottons
Main wash at
60°-50°-40°- 60°-50°-40°-
1.04
54
2.14
Coloured
cotton: e.g.
shirts, blouses,
underwear,
towels, house-
hold linen
30°C
30°C
3 rinses
Long spin
50
60
40
30
0.90
0.40
47
45
1.33
1.06
2.5 kg
2.5 kg
SPIN SPEED
RINSE HOLD
PREWASH
40° AA
EXTRA QUICK
Main wash at
60°-50°-40°-
30°C
3 rinses
Short spin
Synthetics
60°-50°-40°-
30°C
Synthetic
fabrics and
blends: e.g.
shirts, blouses,
underwear
40
30
SPIN SPEED
RINSE HOLD
PREWASH
Main wash at
40°-30°C
3 rinses
Delicates
40°-30°C
Delicate
fabrics: e.g.
acrylic fabrics,
viscose, poly-
ester, synthetic
blends
EXTRA QUICK
Short spin
SPIN SPEED
RINSE HOLD
40
30
0.40
0.40
46
46
54
57
2 kg
2 kg
Main wash at
40°-30°C
3 rinses
Wool
40°-30°C
Wool
Short spin
SPIN SPEED
RINSE HOLD
Hand wash
40°-30°C
Main wash at
40°-30°C
3 rinses
Short spin
The “coloured cotton programme” at 60°C is the reference programme for the data entered in the energy label, in
compliance with EEC 92/75 standards.
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of
laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature
provided for each programme.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Drying Programmes
Timed drying
Degree of drying
Type of fabric
Max. load
Spin speed
Drying time mins
90-100
1200
2.75 kg
1.5 kg
2.75 kg
1.5 kg
Extra dry
Ideal for
towelling
materials
Cotton and linen
(bathrobes, bath
towels, etc.)
1400
1200
80-90
60-70
1400
50-60
1200
1400
1200
80-90
70-80
50-60
Cotton and linen
(towels, T-shirts,
bathrobes)
Store dry (*)
Suitable for items
to put away
1400
900
40-50
70-80
without ironing
Synthetics and mixed
fabrics (jumpers,
blouses, underwear,
household linen)
2,0 kg
1,0 kg
900
35-45
1200
1400
1200
1400
65-75
55-65
45-55
35-45
2.75 kg
1.5 kg
Iron dry
Suitable for
ironing
Cotton and linen
(sheets, tablecloths,
shirts, etc.)
(*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, in
compliance with EC directive 92/75.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
C0068
P1086
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Maintenance Wash
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
P0038
To run a maintenance wash:
Cleaning the pump
●
The drum should be empty of laundry.
The pump should be inspected if
●
Select the hottest cotton wash programme.
• the machine does not empty and/or spin
• the machine makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump.
●
Use a normal measure of detergent, must be a
powder (such as Ariel Futur).
External cleaning
Clean the exterior cabinet of the appliance with a solution of
mild washing up liquid and water and then dry thoroughly.
Proceed as follows:
• Disconnect the appliance.
• If necessary wait until the water has cooled down.
• Open the pump door.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
To aid cleaning, the top part of the additive compartment
should be removed.
P1095
• Place a container close to the pump to collect any
spillage.
• Pull out the emergency emptying hose, place it in the
container and remove its cap.
C0067
C0066
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
• When no more water comes out, unscrew the pump
cover and remove it. Always keep a rag nearby to dry
up spillage of water when removing the cover.
P1090
P1096
The dangers of freezing
• Remove any objects from the pump impeller by
rotating it.
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
●
Turn off the water tap.
●
Unscrew the inlet hose.
●
Place the end of the emergency emptying hose and
that of the inlet hose in a bowl placed on the floor
and let water drain out.
●
Screw the water inlet hose back on and reposition
P1097
the emergency emptying hose after having put the
cap on again.
• Put the cap back on the emergency emptying hose and
place the latter back in its seat.
●
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
Important!
Every time you drain the water through the emergency
emptying hose you must pour 2 litres of water into the
main wash compartment of the detergent drawer and
then run the drain programme. This will activate the
ECO valve avoiding that part of the detergent remains
unused at next washing.
P1098
• Screw the pump cover fully in.
• Close the pump door.
Emergency emptying out
If the water is not discharged, proceed as follows to
empty out the machine:
Warning
• pull out the plug from the power socket;
• close the water tap;
When the appliance is in use and depending on the
programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle,
always wait until the appliance has finished the cycle,
and is empty. When replacing the cover, ensure it is
securely retightened so as to stop leaks and young
children being able to remove it.
• if necessary, wait until the water has cooled down;
• open the pump door;
• place a bowl on the floor and place the end of the
emergency emptying hose into the bowl. Remove its
cap. The water should drain by gravity into the bowl.
When the bowl is full, put the cap back on the hose.
Empty the bowl. Repeat the procedure until water
stops flowing out;
Cleaning the water inlet filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
• clean the pump if necessary as previously described;
It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose.
• replace the emergency emptying hose in its seat after
having plugged it;
• screw the pump cover again and close the door.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed
below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that one of the following alarm codes appears on the display:
- E10 : problem with the water supply
- E20 : problem with water draining
- E40 : door open
Once the problem has been eliminated, press the “Start/Pause” button
to restart the programme. If after all
checks, the problem persists, contact your local Service Force Centre.
Symptom
Possible causes
●
The machine does not start
The door has not been closed. (E40)
●
●
●
●
●
The plug is not properly inserted in the power socket.
There is no supply at the socket.
The main fuse or the fuse in the plug has blown.
The “Start/Pause” button has not been depressed.
The “Delay” option has been selected.
●
●
●
●
The water tap is closed. (E10)
The machine does not fill
The filter in the inlet hose is blocked. (E10)
The inlet hose may be squashed or kinked. (E10)
The door has not been closed. (E40)
●
●
●
The machine fills then empties
immediately
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
●
●
●
●
The machine does not empty and/or
does not spin
The drain hose may be squashed or kinked. (E20)
The “Rinse Hold” option has been selected.
The drain pump may be blocked. (E20)
The drain hose extension, if fitted, is not correct. Follow the
instructions for connecting to the waste.
●
●
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum to
allow the machine to spin.
●
●
There is water on the floor
Too much detergent or unsuitable detergent has been used (creates too
much foam).
Check whether there are any leaks from the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if
it is damp.
●
●
●
●
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
The cap on the emergency emptying hose has not been replaced after
cleaning the pump.
●
Unsatisfactory washing results
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
●
●
●
Stubborn stains have not been treated prior to washing
The correct wash programme/temperature has not been selected.
Too much laundry has been placed in the drum.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible causes
●
The machine vibrates when spinning
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not level and stable (check diagonally).
The washing load is badly distributed in the drum.
●
●
●
●
Maybe there is very little laundry in the drum.
●
The door will not open
The water level is above the bottom edge of the door.
The machine is heating the water or drying the clothes.
The drum is turning.
●
●
●
The electronic balance control device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
Spinning starts late or the machine
does not spin
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after a few minutes, the laundry is still not evenly distributed in the
drum, the machine will spin at a lower spin or will not spin. In this
case, redistribute the load manually and select the spin programme.
●
The machine makes an unusual
noise
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
●
No water is visible in the drum
Machines based on modern technology operate very economically
using very little water without affecting performance.
●
The machine does not dry or does
not dry properly
The drying time or degree of drying has not been selected
The water tap is not turned on (E10)
The drain pump is clogged (E20)
The machine is overloaded
●
●
●
●
The selected drying time or degree of dryness was not suitable for the
laundry
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture)
0870 5 929929
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
For the address of your local Service Force Centre and
further information about Service Force, please visit the
For Customer Service in Ireland please contact us at the
address below:
5. The purchase date.
Please note that a valid purchase receipt or
guarantee documentation is required for in-
guarantee service calls.
Zanussi Electrolux
Electrolux Group (Irl) Ltd
Long Mile Road
Dublin 12
P
r o
M
d .
N
o
d
.
.
.
.
.
.
.
.
.
.
.
o
. . . . . . . . . .
.
S
e r
.
N
.
o
.
.
.
.
.
.
.
.
.
.
Republic of Ireland
Tel: +353 (0)1 4090751
Mod. ..........
Prod. No. ...........
Ser. No. .........
Email: [email protected]
P0042 BD
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Care Department
Zanussi Electrolux
55-77 High Street
Slough
Berkshire
SL1 1DZ
Customer Care Department
For general enquiries concerning your Zanussi
Electrolux appliance or for further information on
Zanussi Electrolux products, please contact our
Customer Care Department by letter or telephone at the
Tel 08705 727727*
* calls to this number may be recorded for training
purposes.
Guarantee Conditions
●
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
Standard guarantee conditions
We, Zanussi Electrolux, undertake that if, within 12
months of the date of the purchase, this ZANUSSI
ELECTROLUX appliance or any part thereof is proved
to be defective by reason only of faulty workmanship or
materials, we will, at our option repair or replace the
same FREE OF ANY CHARGE for labour, materials or
carriage on condition that:
●
Products of Zanussi Electrolux manufacture which
are NOT marketed by Zanussi Electrolux.
European guarantee
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
●
The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
The guarantee starts from the date you first
purchased your product.
●
●
The appliance has been used for normal domestic
purposes only, and in accordance with the
manufacturer’s instructions.
The guarantee is for the same period and to the same
extent for labour and parts as exists in the new
country of use for this brand or range of products.
●
●
The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
The guarantee relates to you and cannot be
transferred to another user.
●
●
All service work under this guarantee must be
Your new home is within the European Community
(EC) or European Free Trade Area.
●
undertaken by a Service Force Centre.
●
Any appliance or defective part replaced shall
The product is installed and used in accordance with
our instructions and is only used domestically, i.e. a
normal household.
●
become the Company’s property.
●
This guarantee is in addition to your statutory and
other legal rights.
The product is installed taking into account
regulations in your new country.
●
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
Exclusions
This guarantee does not cover:
France
Germany
Italy
Senlis
+33 (0) 344 62 29 29
+49 (0) 800 234 7378
+39 0434 39 4700
●
Damage or calls resulting from transportation,
Nurnberg
Pordenone
Stockholm
Slough
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
Sweden
UK
+46 (0) 8 672 53 90
+44 (0) 1753 219897
+353 (0)1 4090751
●
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
Ireland
Dublin
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Should the appliance power supply cable need to
be replaced, this should be carried out by our
Service Force Centre.
Technical Specifications
DIMENSIONS
Height
Width
Depth
85 cm
60 cm
57 cm
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
230-240 V/50 Hz
2050 W (10A)
Minimum
Maximum
50 kPa
800 kPa
WATER PRESSURE
Washing
MAX LOAD CAPACITY
Cotton, linen
Synthetics
Delicate fabrics
Wool and Hand Wash
Drying
5.5 kg
2.5 kg
2.5 kg
2.0 kg
Cotton, linen
Synthetics
2.75 kg
2.0 kg
SPIN SPEED
Maximum
1200 rpm (ZWD 1270 W - ZWD 1270 S)
1400 rpm (ZWD 1470 W)
CONSUMPTION DATA FOR WASHING Energy
1.04 kWh
54 litres
5,5 KG NORMALLY SOILED COTTON
ITEMS AT 60°C
Water
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Fill all the holes with the plastic plugs supplied with the
instruction booklet.
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using a spanner unscrew and remove the two rear
bottom screws. Slide out the two plastic pins.
P1128
P0002
Lay the machine gently on its back, making sure that the
hoses are not squashed.
Important !
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
In case of moving out the same precautions as per
paragraphe “The dangers of freezing” must be taken
i.e. the residual water in the hoses must be pumped out.
P0001
Positioning
P1129
Install the machine on a flat hard floor.
Remove the polystyrene block from the bottom of the
machine and release the two plastic bags.
Very carefully slide out the left polythene bag, removing
it towards the right and then downwards.
Make sure that air circulation around the machine is not
impeded by carpets, rugs etc. Check that the machine
does not touch the wall or other kitchen units.
Never place cardboard, wood or similar materials under
the machine to compensate for any unevenness in the
floor.
1
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
2
3
P1124
P1126
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible
with the plumbing of the existing installation, a variety
of connectors are available from good hardware stores
and plumbers merchants to suit most domestic
plumbing. Any alteration to your existing plumbing
must be carried out by a competent person, or qualified
plumber.
Repeat the operation for the right polythene bag,
removing it towards the left and then upwards.
Installation on a Suspended Floor
P1127
Suspended wooden floors are particularly susceptible to
vibration. To help prevent vibration we recommend you
place a waterproof wood panel, at least 15 mm thick
under the appliance, secured to at least 2 floor beams
with screws. If possible install the appliance in one of
the corners of the room, where the floor is more stable.
Remove the polystyrene base.
Set the machine upright and unscrew the remaining rear
screw. Slide out the relevant pin.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Water inlet
Connect the hose supplied with the machine to a tap
with a 3/4” thread.
Do not use already employed hoses.
“U” piece
supplied
P1199
Place the drain hose into your standpipe, which should
have an internal diameter of approximately 38mm thus
ensuring there is an air break between the drain hose
and standpipe.
P1088
38 mm (11.2”)
standpipe
diameter
Installation should comply with local water authority
and building regulations’ requirements.
The appliance must be connected to a cold water
supply only.
A minimum water pressure of 50 kPa (0.5 bar) is
required for safe operation of the appliance.
P1200
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
When discharging into a standpipe ensure that the top of
the standpipe is no more than 90cm (35.4'') and no less
than 60cm (23.6'') above floor level.
There should be a minimum distance of 5.02m
(161/2 ft) between the appliance’s inlet and the bottom
of the water storage tank.
3 pin
Set the hose correctly by loosening the ring nut. After
positioning the inlet hose, be sure to tighten the ring nut
again to prevent leaks.
P1201
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
P0021
2. Onto a sink outlet spigot.
Water drainage
This appliance is designed to be permanently plumbed
into your home's drainage system using one of the
following methods.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
P1197
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Onto a sink outlet spigot.
Some vibration is inevitable, especially if mounted on a
wooden floor. Sprung wooden floors are particularly
susceptible to vibration. For advice, consult a builder. If
possible, always place the machine on a solid floor.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
Sp ecial co nd it io ns
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
P1197
Warning
Push the drain hose onto the spigot and secure with a
clip if required, ensure a loop is formed in the drain
hose (see diagram) to prevent waste from the sink
entering the washing machine.
The machine should NOT be placed on deep pile
carpeting.
Note
Please ensure that when the appliance is installed it is easily
accessible for the engineer in the event of a breakdown.
In t he int erest of t he environm ent
Loop
Washing machines and dishwashers should be connected
to the FOUL drainage system, the water will then be
taken to a sewage works for treatment before being
discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
P1198
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of 18mm.
Im portant
If you require any further advice please contact your local
water authority.
Before connecting up the machine to new pipework or
to pipework that has not been used for some time, run
off a reasonable amount of water to flush out any debris
that may have collected in the pipes.
Levelling
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable.
SHOWER
SINK TOILET
BATH
BIDET
WASHING
MACHINE
DISHWASHER
RAINWATER
'RUN-OFF'
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
SEWAGE
TREATMENT
WORKS
P1051
UNTREATED
DISCHARGE
TREATED
DISCHARGE
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
RIVER
RIVER
P0987
26
Download from Www.Somanuals.com. All Manuals Search And Download.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
WARNING:
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
The manufacturer declines any liability should
this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
Should the appliance power supply cable need to be
replaced, this should be carried out by our Service
Force Centre.
Note
When the appliance is installed the power supply cable
must be accessible.
P
r o
M
d
o
.
N
d
.
.
.
.
.
.
.
.
.
.
.
o
. . . . . . . . . . .
.
S
e
.
r
N
o
. . . . . . . . .
.
Permanent connection
Mod. ..........
Prod. No. ...........
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
Ser. No. .........
P0042 BD
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
The switch must not break the yellow and green earth
cable at any point.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
Brown
GREEN & YELLOW
E
L
N
BROWN
BLUE
CORD CLAMP
P1041
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
earth symbol
or coloured green and yellow.
The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum
cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150
countries around the world.
© Electrolux plc 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
|