EN
User manual
Fridge Freezer
ZRB934PW
ZRB934XL
Download from Www.Somanuals.com. All Manuals Search And Download.
squashed or damaged power plug may overheat
and cause a fire.
3. Make sure that you can come to the mains plug
of the appliance.
Care and cleaning
• Before maintenance, switch off the appliance and dis-
connect the mains plug from the mains socket.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost from the ap-
pliance. Use a plastic scraper.
• Regularly examine the drain in the refrigerator for de-
frosted water. If necessary, clean the drain. If the
drain is blocked, water will collect in the bottom of
the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not insert
the power plug. There is a risk of electric shock
or fire.
6. You must not operate the appliance without the
1)
lamp cover of interior lighting.
• This appliance is heavy. Care should be taken when
moving it.
• Do not remove nor touch items from the freezer com-
partment if your hands are damp/wet, as this could
cause skin abrasions or frost/freezer burns.
Installation
Important! For electrical connection carefully follow the
instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages
on it. Do not connect the appliance if it is damaged.
Report possible damages immediately to the place
you bought it. In that case retain packing.
• It is advisable to wait at least four hours before con-
necting the appliance to allow the oil to flow back in
the compressor.
• Avoid prolonged exposure of the appliance to direct
sunlight.
2)
•
Bulb lamps used in this appliance are special pur-
pose lamps selected for household appliances use
only. They are not suitable for household room illu-
mination.
• Adequate air circulation should be around the appli-
ance, lacking this leads to overheating. To achieve
sufficient ventilation follow the instructions relevant
to installation.
• Wherever possible the back of the product should be
against a wall to avoid touching or catching warm
parts (compressor, condenser) to prevent possible
burn.
• The appliance must not be located close to radiators
or cookers.
• Make sure that the mains plug is accessible after the
installation of the appliance.
Daily Use
• Do not put hot pot on the plastic parts in the appliance.
• Do not store flammable gas and liquid in the appli-
ance, because they may explode.
• Do not place food products directly against the air
outlet on the rear wall.
• Frozen food must not be re-frozen once it has been
thawed out.
• Store pre-packed frozen food in accordance with the
frozen food manufacturer's instructions.
• Appliance's manufacturers storage recommendations
should be strictly adhered to. Refer to relevant instruc-
tions.
• Do not place carbonated or fizzy drinks in the freezer
compartment as it creates pressure on the container,
which may cause it to explode, resulting in damage
to the appliance.
3)
4)
•
Connect to potable water supply only.
Service
• Any electrical work required to do the servicing of
the appliance should be carried out by a qualified elec-
trician or competent person.
• This product must be serviced by an authorized Serv-
ice Centre, and only genuine spare parts must be used.
• Ice lollies can cause frost burns if consumed straight
from the appliance.
1) If the lamp cover is foreseen
2) If the lamp is foreseen
3) If the appliance is Frost Free
4) If a water connection is foreseen
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Environment Protection
bish. The insulation foam contains flammable gases:
the appliance shall be disposed according to the appli-
cable regulations to obtain from your local authorities.
Avoid damaging the cooling unit, especially at the rear
near the heat exchanger. The materials used on this ap-
This appliance does not contain gasses which
could damage the ozone layer, in either its refrig-
erant circuit or insulation materials. The appliance shall
not be discarded together with the urban refuse and rub-
pliance marked by the symbol
are recyclable.
Operation
Switching on
A medium setting is generally the most suitable.
Insert the plug into the wall socket.
Turn the Temperature regulator clockwise to a medium
setting.
However, the exact setting should be chosen keeping in
mind that the temperature inside the appliance depends
on:
Switching off
• room temperature
To turn off the appliance, turn the Temperature regulator
to the "O" position.
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• turn the Temperature regulator toward lower settings
to obtain the minimum coldness.
• turn the Temperature regulator toward higher set-
tings to obtain the maximum coldness.
Important! If the ambient temperature is high or the
appliance is fully loaded, and the appliance is set to the
lowest temperatures, it may run continuously causing
frost to form on the rear wall. In this case the dial must
be set to a higher temperature to allow automatic
defrosting and therefore reduced energy consumption.
First use
Cleaning the interior
Important! Do not use detergents or abrasive powders,
as these will damage the finish.
Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm water
and some neutral soap so as to remove the typical
smell of a brand-new product, then dry thoroughly.
Daily use
Place the fresh food to be frozen on the top compartment.
Storage of frozen food
When first starting-up or after a period out of use, be-
fore putting the products in the compartment let the ap-
pliance run at least 2 hours on the higher settings.
Freezing fresh food
The freezer compartment is suitable for freezing fresh
food and storing frozen and deep-frozen food for a long
time.
To freeze fresh foods it is not necessary to change the
medium setting.
Important! In the event of accidental defrosting, for
example due to a power failure, if the power has been
off for longer than the value shown in the technical
characteristics chart under "rising time", the defrosted
food must be consumed quickly or cooked immediately
and then re-frozen (after cooling).
However, for a faster freezing operation, turn the temper-
ature regulator toward higher settings to obtain the max-
imum coldness.
Important! In this condition, the refrigerator
compartment temperature might drop below 0°C. If this
occursresetthetemperatureregulatortoawarmersetting.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Small pieces may even be cooked still frozen, directly
from the freezer: in this case, cooking will take longer.
Thawing
Deep-frozen or frozen food, prior to being used, can be
thawed in the refrigerator compartment or at room tem-
perature, depending on the time available for this opera-
tion.
Helpful hints and tips
• The thermic dilatation might cause a sudden crack-
ing noise. It is natural, not dangerous physical phe-
nomenon. This is correct.
• When the compressor switches on or switches off,
you will hear a faint "click" of the temperature regula-
tor. This is correct.
Normal Operating Sounds
• You may hear a faint gurgling and a bubbling sound
when the refrigerant is pumped through the coils or
tubing. This is correct.
• When the compressor is on, the refrigerant is being
pumped around and you will hear a whirring sound
and a pulsating noise from the compressor. This is
correct.
Care and cleaning
er casing of this appliance is only cleaned with warm wa-
ter with a little washing-up liquid added.
After cleaning, reconnect the equipment to the mains
supply.
Caution! Unplug the appliance before carrying
out any maintenance operation.
This appliance contains hydrocarbons in its cool-
ing unit; maintenance and recharging must there-
fore only be carried out by authorized technicians.
Defrosting of the refrigerator
Frost is automatically eliminated from the evaporator of
the refrigerator compartment every time the motor com-
pressor stops, during normal use. The defrost water
drains out through a trough into a special container at
the back of the appliance, over the motor compressor,
where it evaporates.
It is important to periodically clean the defrost water
drain hole in the middle of the refrigerator compartment
channel to prevent the water overflowing and dripping
onto the food inside. Use the special cleaner provided,
which you will find already inserted into the drain hole.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with lukewarm wa-
ter and some neutral soap.
• regularly check the door seals and wipe clean to en-
sure they are clean and free from debris.
• rinse and dry thoroughly.
Important! Do not pull, move or damage any pipes and/
or cables inside the cabinet.
Never use detergents, abrasive powders, highly
perfumed cleaning products or wax polishes to clean
the interior as this will damage the surface and leave a
strong odour.
Clean the condenser (black grill) and the compressor at
the back of the appliance with a brush or a vacuum clean-
er. This operation will improve the performance of the
appliance and save electricity consumption.
Important! Take care of not to damage thecooling system.
Defrosting the freezer
A certain amount of frost will always form on the freezer
shelves and around the top compartment.
Many proprietary kitchen surface cleaners contain chem-
icals that can attack/damage the plastics used in this ap-
pliance. For this reason it is recommended that the out-
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Defrost the freezer when the frost layer reaches a thick-
ness of about 3-5 mm.
To remove the frost, follow the instructions below:
• pull out the plug from the wall socket or switch off
the appliance
• switch on the cabinet and replace the frozen foodstuff.
It is recommended to operate the appliance at the high-
est position of the thermostatic control for some hours
so that it can reach the sufficient storing temperature as
soon as possible.
• remove any stored food, wrap it in several layers of
newspaper and put it in a cool place
• remove the freezer drawers
• put insulating material around the drawers, e.g. blan-
kets or newspapers.
Defrosting can be accelerated by placing bowls with hot
water (not boiling) inside the freezer.
Important! Never use sharp metal tools to scrape off
frost from the evaporator as you could damage it. Do
not use a mechanical device or any artificial means to
speed up the thawing process other than those
recommended by the manufacturer. A temperature rise
of the frozen food packs, during defrosting, may shorten
their safe storage life.
• Loosen the drainage channel from its resting posi-
tion, push it in according to the illustration and place
it in the bottom freezer drawer where water can collect
• carefully scrape off the ice when it starts to thaw. Use
a wood or a plastic scraper
• when all the ice has melted, clean and wipe the cabi-
net dry, then put the drainage channel back in place.
Technical data
Dimension
Height
1850 mm
595 mm
648 mm
20 h
Width
Depth
Rising Time
The technical information are situated in the rating plate
on the internal left side of the appliance and in the ener-
gy label.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Caution! Read the "Safety Information" carefully
for your safety and correct operation of the
appliance before installing the appliance.
Warning! This appliance must be earthed.
The manufacturer declines any liability should
these safety measures not be observed.
Positioning
1
2
Install this appliance at a location where the ambient tem-
perature corresponds to the climate class indicated on
the rating plate of the appliance:
Climate
class
Ambient temperature
SN
+10°C to + 32°C
3
N
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
4
5
ST
T
Location
The appliance should be installed well away from sour-
ces of heat such as radiators, boilers, direct sunlight
etc. Ensure that air can circulate freely around the back
of the cabinet. To ensure best performance, if the appli-
ance is positioned below an overhanging wall unit, the
minimum distance between the top of the cabinet and
the wall unit must be at least 100 mm . Ideally, howev-
er, the appliance should not be positioned below over-
hanging wall units. Accurate levelling is ensured by one
or more adjustable feet at the base of the cabinet.
Important! The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow:
Brown:
Earth
Live
1
3
5
Blue:
Neutral
As the colours of the wires in the mains lead of this ap-
pliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
Warning! It must be possible to disconnect the
appliance from the mains power supply; the plug
must therefore be easily accessible after installation.
1. Connect the wire coloured green and yellow to the
terminal marked either with the letter “E“ or by the
earth symbol
or coloured green and yellow.
2. Connect the wire coloured blue to the terminal ei-
ther marked with the letter “N“ or coloured black.
B
A
3. Connect the wire coloured brown to the terminal ei-
ther marked with the “L“ or coloured red.
4. Check that no cut, or stray strands of wire is
4
present and the cord clamp
outer sheath.
is secure over the
Electrical Connection
Caution! Any electrical work required to install
this appliance should be carried out by a qualified
electrician or competent person.
5. Make sure the electricity supply voltage is the same
as that indicated on the appliance rating plate.
6. Switch on the appliance.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
The appliance is supplied with a 13 amp plug fitted
Removing the shelf holders
2
. In the event of having to change the fuse in the
Your appliance is equipped with shelf retainers that
make it possible to secure the shelves during transpor-
tation.
plug supplied, a 13 amp ASTA approved (BS 1362)
fuse must be used.
Warning! A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard. Ensure
that it is disposed of safely.
To remove them proceed
as follows:
1. Move the shelf hold-
ers in the direction of
the arrow (A).
Rear spacers and levelling
2. Raise the shelf from
the rear and push it
forward until it is
freed (B).
2
1
3. Remove the retainers
(C).
3
Door reversibility
In the bag with the docu- When placing the appli-
mentation, there are two ance ensure that it stands
spacers which must be fit- level. This can be ach-
ted as shown in the figure. ieved by two adjustable
Slackenthescrewsandin- feet at the bottom in front.
sert the spacer under the
Warning! Before carrying out any operations,
remove the plug from the power socket.
Important! To carry out the following operations, we
suggest that this be made with another person that will
keep a firm hold on the doors of the appliance during
the operations.
screw head, then tighten
again the screws.
m1
m5
m2
1
m6
m4
m3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
• Open the doors. Un-
screw the middle hinge
(m2). Remove the plas-
tic spacer (m1).
• Remove the spacer
(m6) and move to the
other side of the hinge
pivot (m5).
• Unscrew the lower
hinge (b1)
• Remove the left-hand
cover pins (b4) and
• Remove the plugs (1)
on the upper side of
both doors and move
them to the other side.
• Unscrew the upper
hinge pivot and place it
on the opposite side.
• Fit the upper door on
the upper door pivot.
• Re-insert the upper
door on the middle
hinge pivot (m5) slight-
ly tilting both doors.
• Re-screw the middle
hinge (m2). Do not for-
get the plastic spacer
(m1).
move to the other side. • Re-insert the lower
door on the lower hinge
pivot (b2).
• Insert the middle hinge
(m2) into the left drill of
the lower door.
• Re-screw the lower
hinge (b1) on the oppo-
site side.
• Unscrew the lower
hinge pivot (b2) and
the spacer (b3) and
place them on the oppo-
site side.
• Remove the doors.
• Remove the left-hand
cover pin of the middle
hinge (m3,m4) and
move to the other side.
• Fit the pin of the middle
hinge (m5) into the left-
hand hole of the lower
door.
Do a final check to make sure that:
• All screws are tightened.
• The edges of the doors run parallel to the side edge
of the appliance.
In case you do not want to carry out the above men-
tioned operations, contact the nearest After Sales Serv-
ice Force. The After Sales Service specialist will carry
out the reversibility of the doors at your cost.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
Environmental concerns
potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product,
please contact your local council, your household waste
disposal service or the shop where you purchased the
product.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|