E LE CTRIC HOB
ZBE 602
INSTRUCTION BOOKLE T
Please read this instruction booklet before using the appliance
Download from Www.Somanuals.com. All Manuals Search And Download.
Con t en t s
For the Installer
For the User
Tech n ical Dat a
Page 1 1
Descript ion
of t h e Hob
Page 5
Page 6
Im port an t Safet y
Requ irem en t s
Page 1 1
Page 1 3
Page 1 3
Operat ion
In st allat ion
Bu ildin g In
Main t en an ce
an d Clean in g
Page 8
Page 9
Page 9
Som et h in g Not
Work in g?
Elect rical Con n ect ion Page 1 4
Wirin g Diagram Page 1 5
Service an d
Spare Part s
Gu aran t ee Con dit ion s Page 1 0
Guide to Use the instructions
The following symbols will be found in the text to
guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an
This appliance is manufactured according
to the following EEC directives:
73/23 EEC - 90/683 EEC - 93/68 EEC -
89/336 EEC current edition.
☞
operation
Hints and Tips
i
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Descript ion of t h e Hob
2
3
1
5
4
6
7
8
9
10
1. Hob Top
2. Rapid Hotplate - 2090 W/180 mm dia.
3. Rapid Hotplate - 2090 W/180 mm dia.
4. Rapid Hotplate - 1570 W/145 mm dia.
5. Rapid Hotplate - 1570 W/145 mm dia.
6. Control knob for back left hotplate
7. Control knob for front left hotplate
8. Control knob for front right hotplate
9. Control knob for back right hotplate
10.Electric Hotplates Control Light
WHEN THE HOB IS FIRST INSTALLED
INSTALLATION
Once the hob has been installed, it is
important to remove any protective
materials, which were put on in the factory.
The hob must be installed according to the
instructions supplied.
The hob must be installed by qualified
personnel to the relevant British Standards.
Please, ensure that, once the hob is
installed, it is easily accessible for the
engineer in the event of a breakdown.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operat ion
ELECTRIC HOTPLATES
To switch on a hotplate, turn the relevant control
knob anticlockwise to the required heat setting.
The control knob is numbered 1 - 6
0 - OFF
1 - Minimum
6 - Maximum.
The hob has four rapid hotplates:
The rapid hotplates are indicated by a red dot, and
will heat up more quickly than a normal plate. As the
red dots are painted on the plate, they may deteriorate
during use and even disappear completely after a
period of time. This will not affect the performance
of the hob.
It is important to note that the plate may smoke
i
and produce a slightly unpleasant odour when
used for the first time. This is quite normal and
will disappear after a few minutes.
Suggestions for the correct setting of the plates are
given in the following table.
OFF
0
1
Very Gentle
To keep food warm
To melt butter and chocolate
Gentle
Slow
2
3
4
To prepare cream-sauces,
stews and milk puddings
or to fry eggs
Dried vegetables, frozen
food, fruit, boling water
or milk
Medium
Boiled potatoes, fresh
vegetables, pâtés, soups,
broths, pancakes or fish
High
Fast
5
6
Larger stews, meat roll, fish,
omelettes, steaks
Steaks, escalopes and frying.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints and Tips
i
Saucepans for use on solid plates should have several
characteristics:
●
●
They should be fairly heavy duty
They should fit the heat area exactly, or be slightly
larger for efficient use, NEVER smaller.
●
They should have a flat base to ensure good
contact with the plate.
This is particularly important when using pans for
high temperature frying or pressure cooking.
As soon as liquid starts boiling, turn down the plate
control knob so that it will barely keep the liquid
simmering.
You can switch off the plate a short while before you
finish cooking, and the final stage will be completed
on the accumulated heat. Similarly, stews etc. cooked
in well covered saucepans cook at lower temperature
which is more economical.
Ensure pans are large enough to avoid
liquids being split onto the plates.
Never leave the plates on without a pan on
them or with an empty pan on them.
Take care never to lean or reach over a hot
electric plate. Always point pan handles
inward or over the work surface next to the
hob to avoid accidentally knocking over a
pan as you pass by.
Take care when frying food in hot oil or fat,
as the overheated splashes could easily
ignite.
If the control knobs become difficult to turn,
please contact your local Zanussi Service
Force Centre.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Before any maintenance or cleaning can be
carried out, you must DISCONNECT the
hob from the electricity supply.
The hob is best cleaned whilst it is still warm, as
spillage can be removed more easily than if it is left
to cool.
The HobTop
Regularly wipe over the hob top using a soft cloth
well wrung out in warm water to which a little
washing up liquid has been added. Avoid the use of
the following:
- household detergent and bleaches;
- impregnated pads unsuitable for non-stick saucepans;
- steel wool pads;
- bath/sink stain removers.
Should the hob top become heavily soiled, it is
recommended that a cleaning product such as Hob
Brite or Bar Keepers Friend is used.
The control knobs may be removed by carefully
pulling them upward for easier cleaning.
The Hotplates
Spills onto the actual plate should be removed using
warm water and a soft brush, nylon or plastic scourer.
To keep the plates looking as new, hotplate
conditioner can be purchased from most hardware
stores, e.g. "4 Hob" by HomeCare Products (follow
the manufacturer's instruction for use).
Alternatively, wipe the plates with a drop of olive oil
on a kitchen towel to avoid rust. It is important to
note that the plate will smoke a little and produce a
slightly unpleasant odour when next used.
Failure to clean and condition hotplates may lead to
rust and corrosion forming on the surface.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Som et h in g Not Work in g?
If the hob is not working correctly, please carry out the following checks before contacting your local
Zanussi Service Force Centre.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
SYMPTOM
SOLUTION
■ The plate does not heat up.
◆ Check that the unit is plugged in and the electrical
supply is switched on
◆ Check that the RCCB has not tripped (if fitted)
◆ Check the mains fuse has not blown
◆ Check the correct control knob has been turned.
■ The plate is not giving satisfactory results
◆ Check the plate is clean and dry
◆ Check the cooking pan is the correct size for the plate.
◆ Check the cooking pan has a flat bottom
◆ Check the setting is correct for the type of cooking.
Please note that it will be necessary to provide proof
of purchase for any in-guarantee service calls.
If after all these checks, the oven still does not work,
contact your local Zanussi Service Force Centre.
When you contact them, they will need the following
information:
1. Your name, address and post code.
2. Your telephone number
3. Clear and concise details of the fault
4. The model and the serial number (which can be
found on the rating plate)
In-guarantee customers should ensure that the
above checks have been made as the engineer will
make a charge if the fault is not a mechanical or
electrical breakdown.
5. Date of purchase
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Service an d Spare Part s
CUSTOMER CARE
For general enquiries concerning your Zanussi
appliance, contact our Customer Care Department by
letter or telephone as follows:
If you require spare parts or an engineer contact your
local Service Force Centre by telephoning:
Customer Care Department
ZANUSSI
Zanussi House
Hambridge Road
Newbury, Berks, RG14 5EP
Tel: 01635 - 521313
0870 5 929929
Your call will be routed to your local Service Force
Centre. For further details, please see the
accompanying Customer Care Booklet.
Peace of Min d for 2 4 Mon t h s
* Appliances found to be in use within a
ZANUSSI GUARANTEE CONDITIONS
commercial or similar environment, plus those
which are the subject to rental agreements.
* Products of Zanussi manufacture which are not
marketed by Zanussi.
We, Zanussi, undertake that if, within 24 months of
the date of the purchase, this Zanussi appliance or
any part thereof is proved to be defective by any
reason only of faulty workmanship or materials, we
will, at our option, repair or replace the same FREE
OF ANY CHARGE for labour, materials or carriage
on condition that:
Eu ropean Gu aran t ee
If you should move to another country within Europe
then your guarantee moves with you to your new
home subject to the following qualifications:
* The appliance has been correctly installed and
used only on the gas and electricity supply stated
on the rating plate.
* The guarantee starts from the date you first
purchased your product.
* The guarantee is for the same period and to the
same extent for labour and parts as exist in the
new country of use for this brand or range of
products.
* This guarantee relates to you and cannot be
transferred to another user.
* The appliance has been used for normal domestic
purpose only, and in accordance with the
manufacturer's instructions.
* The appliance has not been serviced, maintained,
repaired, taken apart or tampered with by any
person not authorised by us.
* Your new home is within the European
Community (EC) or European Free Trade Area.
* The product is installed and used in accordance
with our instructions and is only used
domestically, i.e. a normal household
* The product is installed taking into account
regulations in your new country.
* All service work under this guarantee must be
undertaken by a Zanussi Service Centre.
* Any appliance or defective part replaced shall
become the Company's property.
* This guarantee is in addition to your statutory and
other legal rights.
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside
these hours, in which case a premium will be
charged.
Before you move, please contact your nearest
Customer Care centre, listed below, to give them
details of your new home. They will then ensure that
the local Service Organisation is aware of your move
and able to look after you and your appliances.
Exclu sion s
This guarantee does not cover:
France
Senlis
+33 (0)3 44 62 29 99
* Damage or calls resulting from transportation,
improper use or neglect, the replacement of any
light bulbs or removable parts of glass or plastic.
* Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliance
outside the United Kingdom.
Germany Nürnberg +49 (0)911 323 2600
Italy
Sweden
UK
Pordenone +39 (0)1678 47053
Stockholm +46 (0)8 738 79 50
Newbury +44 (0)1635 521 313
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions for the Installer
Important safety requirements
Engineer technical data
This hob must be installed in accordance with the IEE
Wiring Regulations (Current Edition).
Detailed recommendations are contained in the
following British Standards Codes Of Practice: B.S.
6172/ B.S. 5440, Par. 2 and B.S. 6891 Current
Editions.
OVERALL DIMENSIONS
Width:
Depth:
Height:
Weight:
580 mm.
510 mm.
88 mm.
11 Kg.
CUT OUT DIMENSIONS
Location
This hob has been registered as a "Class X" appliance
according to Fire Risk Regulations. Minimum
distances detailed below must be observed.
The hob may be located in a kitchen, a kitchen/diner
or bed sitting room, but not in a bathroom or shower
room.
Width:
Depth:
Thickness: 30 mm.
560 mm.
480 mm.
SUPPLY CONNECTIONS
Before making the cut out in the worktop ensure that
there is a minimum distance of 55 mm. between the
rear edge of the hob and the wall. A minimum
distance of 100 mm. must be left between the side
edges of the hob and any adjacent cabinets or walls.
The minimum distance combustible material can be
fitted above the hob in line with the edges of the hob
is 420 mm. If it is fitted below 420 mm. a space of 50
mm. must be allowed from the edges of the hob.
The minimum distance combustible material can be
fitted directly above the hob is 700 mm.
Electric:
230-240V 50Hz AC electrical supply.
This appliance complies with the EEC Directive No
89/336, concerning suppression of radio electrical
interference.
Heating elements Ratings
Rapid back left Hotplate Ø 180 mm
Rapid back right Hotplate Ø 145 mm
Rapid front right Hotplate Ø 145 mm
Rapid front left Hotplate Ø 180 mm
Total rating
2090 W
1570 W
1570 W
2090 W
7320 W
INSTALLATION GUIDANCE INSTRUCTIONS
INSTALLATION GUIDANCE INSTRUCTIONS
CLEARANCES REQUIRED
CLEARANCES REQUIRED
WHEN FITTING THE HOB
WHEN FITTING THE HOB
WITH A COOKER HOOD ABOVE
WITHOUT A COOKER HOOD ABOVE
700 mm
650 mm
420 mm
420 mm
55 mm
420 mm
420 mm
100 mm
100 mm
50 mm
50 mm
FO 0812
FO 0813
11
Download from Www.Somanuals.com. All Manuals Search And Download.
In st allat ion
Rect an gu lar cu t -ou t size for h ob
IMPORTANT
This hob must be installed by qualified
personnel to the relevant British Standards.
580
510
The manufacturer will not accept liability,
should the above instructions or any of the
other safety instructions incorporated in
this book be ignored.
Cut O ut Size
The dimensions of the cut-out are given in the
diagram.
560
480
55 min.
FO 2230
ON/OFF SWITCH
1
Bu ildin g In
FLEX
OUTLET
Building over a cupboard or drawer
If the hob is to be installed above a cupboard or
drawer it will be necessary to fit a heat resistant board
below the base of the hob on the underside of the
work surface.
It is also recommended to carry out the electrical
connection to the hob as shown in diagrams 1 and 2.
FO 0763
ON/OFF SWITCH
2
FLEX
OUTLET
FO 0764
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Building over a kitchen unit with door
3
Proper arrangements must be taken in designing the
furniture unit, in order to avoid any contact with the
bottom of the hob which can be hot when in
operation. The recommended solution is shown in
diagram 3.
a
60
The panel fitted under the hob ("a") should be easily
removable to allow easy access if technical assistance
is needed. The space behind the kitchen unit ("b") can
be used for connections.
b
FO 1013
Dimensions are given in mm.
Fitting the hob to the worktop
Before fitting the hob into the cut out, a sealing
gasket supplied with the hob must be fitted to the
edge of the cut out. It is essential that no gaps are left
in this seal in order to prevent spillage near the hob
seeping into the cabinet below.
1) Place the sealing gasket all around the edge
Seal
a
☞
of the cut out.
2) Place the hob into the cut out and secure it by
means of the relevant fixing clamps and
screws, as shown in the diagram.
FO 0199
3) Remove the excess seal
The edge of the hob forms a double seal which
prevents the ingress of liquids.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Elect rical con n ect ion s
The hob should be conncted to a double pole switch
Any electrical work required to install this
hob should be carried out by a qualified
electrician or competent person, in
with a minimum gap of 3 mm. between the switch
contacts and of a type suitable for the required load in
compliance with the current electric regulations. The
switch should be sited within 2m of the hob and be
easily accessible upon completion of the installation.
accordance with the current regulations.
THIS HOB MUST BE EARTHED.
The switch must not break the yellow and green earth
cable at any point.
Th e m an u fact u rer declin es an y liabilit y
sh ou ld t h ese safet y m easu res n ot be
observed.
Ensure that the hob supply cord does not
come into contact with surfaces with
temperatures higher than 50 deg. C.
Th is h ob is design ed t o be con n ect ed t o a
2 3 0 -2 4 0 V 5 0 Hz AC elect rical su pply.
Supply Cable Specifications
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the hob rating
plate. The rating plate is located on the bottom of the
hob. A copy is attached on the back cover of this
book.
For Uk u se on ly
Connection Min. size
Cable / flex Fuse
via
Cable/flex type
• Cooker
Control
Circuit
6 mm2
PVC/PVC 30 A
twin and
earth
The hob is supplied without supply cord. A 3 core
flexible supply cord must be fitted, in accordance
with the specification given in the relevant tables.
For Eu rope u se on ly
Min. size Cable/flex Cable / flex type Fuse
4 mm2
H05 RR-F 30 A
1) Remove the mains terminal cover plate from
☞
the underside of the hob, to expose the mains
terminal block.
2) Loosen the two cable clamp screws and lift
the top section of the clamp enough to allow
the cable to be passed through.
3) Connect the red (live) wire to the terminal
which is marked with the number 1.
4) Connect the black (neutral) wire to the
terminal which is marked with the number 4.
5) After fitting a green or yellow/green sleeve
over the bare copper wire (earth wire), connect
the exposed end to the terminal which is
marked with the earth symbol
number 5.
or with the
NOTE:
The earth wire should be about 2 cm. longer
than the live and neutral wires.
FO 0488
6) Secure the cable by means of the clamp screws
and refit the terminal block cover.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|