BAVL
DVD PLAYER
DVD-S30
OWNER’S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
CAUTION
●
The name plate is located on the bottom of the unit.
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
MODEL NO. DVD-S30
MADE IN MALAYSIA
CAUTION
VARNING
VARO !
-
-
VISIBLE AND
WHEN OPEN. AVOID EXPOSURE TO BEAM.
/
OR INVISIBLE LASER RADIATION
MODEL NO. DVD-S30
MADE IN MALAYSIA
SYNLIG OCH ELLER OSYNLIG LASERSTRÅNING NÄR
DENNA DEL ÄR Ö PPNAD. STRÅLEN ÄR FARLIG.
/
AVATTAESSA OLET ALTTINA NÄKYVÄLLE JA
NÄKYMÄTÖMÄLLE LASERSÄTEILYLLE.
ÄLÄ KATSO SÄTEESEEN.
/
TAI
VARNING
-
SYNLIG OCH
/
ELLER OSYNLIG LASERSTRÅLNING NÄR
DENNA DEL ÄR ÖPPNAD. BETRAKTA EJ STRALEN.
VORSICHT ! SICHTBARE UND ODER UNSICHTBARE
/
LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET.
NICHT DEM STRAHL AUSSETZEN.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ON DISCS
About region codes
Handling of discs
• Do not touch the surface of the
disc. Hold a disc by its edge and
center hole.
• Do not leave a disc in the unit when
you are not playing it.
• Do not write on the disc with a pencil or other marker.
• Do not stick tape, seals or other attachments to a disc, and do
not bring into contact with glue.
The region code (an ID number assigned to each market
region) is set for normal DVD players and DVD video
discs. The DVD-S30 supports the discs with the region
codes shown below. For details, read the information on
the disc jacket.
Region code of
Destination
Playable discs
the DVD player
• Do not use an adaptor or protective cover to prevent scratches.
• Do not use a disc whose surface can be printed with a
commercially available label printer.
• Do not put a disc in a place with
U.K.
Europe
ALL
2
2
direct sunlight, high
temperature, high humidity or a
Caution
Australia
lot of dust.
ALL
4
4
3
Korea
Taiwan
Asia
• If a disc becomes dirty, wipe it
with a clean, dry cloth from the
center out to the edge. Do not use
record cleaner or paint thinner.
• Do not use a commercially
available lens cleaner.
ALL
3
Notes about discs
• This unit is designed for use with DVD video, Video CD, Super
video CD, Audio CD, CD-R, CD-RW, DVD+RW, DVD+R,
DVD-R, DVD-RW and DVD-RW (VR format).
• The DVD player cannot play a CD-R, CD-RW, DVD-R, DVD-
RW, DVD+R or DVD+RW disc that has not been finalized.
Finalizing is a process that prepares a disc for playback on a
compatible device.
• This unit is not compatible with 8-cm discs.
• Only use discs from a reputable manufacturer. Some discs
cannot be played back, depending on recording conditions and
disc characteristics.
• Do not use discs with non-standard shapes or sizes.
• Some DVD video or video CD discs may operate and function
differently than noted in this manual. That is by manufacturer
design and not a defect in this unit. For details read the
information on the disc jacket.
• Some discs cannot be played depending on the recording
conditions such as PC environment and application software.
Failure can also result from disc characteristics and condition,
like material quality, scratches or curvature.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Remote Control Codes .........................................29
Step 4: Setting the disc language
■ About this manual
• This manual provides information relevant only to the
YAMAHA DVD player “DVD-S30”.
To repeat between two points
Specifying an elapsed time for playback
Customizing Playback Order
• In this manual, operations that can be performed using either
the front panel buttons or remote control are explained using the
remote control.
• y indicates a tip for your operation. Notes contain important
information about safety and operating instructions.
• This manual is printed prior to production. Design and
specifications are subject to change in part as a result of
improvements, etc. In case of differences between the manual
and the product, the product has priority.
Restricting Playback ........................................... 17
Playing MP3 or JPEG (Kodak) Picture
Viewing JPEG (Kodak) pictures in thumbnailed
form ..................................................................... 19
Setting the Remote Control Code ....................... 19
Changing Playback Settings on the TV
(On-Screen Menu) ........................................... 20
Configuring the Various Parameters
Setup menu items .................................................... 22
1
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
PREPARATION
Supplied Parts
This product consists of the following parts. Before connecting an amplifier or a TV to this product, make sure you
received all of the following parts.
DVD player (DVD-S30) x 1
Accessories
Optical cable
(60 cm) x 1
Remote control
Battery x 2
(AA, R06, UM-3)
Video pin cable
(1 m) x 1
STANDBY/ON
STANDBY/ON
DVD
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
ZOOM
8
REPEAT
A-B
AUDIO SUBTITLE
9
0
SHIFT
TV
TV INPUT
DUAL MONO
TV CH
qVS
Owner’s Manual
(this manual)
DVD player stand
x 2
ON SCREEN
SETUP
ENTER
BAVL
MENU
RETURN
DVD PLAYER
TV VOL
VOLUME
DVD-S30
MUTE
NIGHT
TEST
L
R
1
2
INPUT
MODE
MOVIE
3
4
OWNER’S MANUAL
MUSIC SPORTS GAME
y
You can place the DVD player vertically (STANDBY/ON becomes the top and h becomes the bottom as the diagram below) using the
supplied DVD player stands.
STANDBY/ON
DVD player stand
h
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
Controls and Functions
■ Front panel
1
2
3
4
5
s
STANDBY/ON
p
e
6
7
8
1 STANDBY/ON
6 Disc loading slot
Turn this unit on or set it to the standby mode.
Insert a disc to be played.
y
Note
When the unit is in the standby mode, the unit consumes a small
Place the disc with the data side facing down. If the DVD player
is placed vertically, place the disc with the data side facing left.
amount of power.
2 Front panel display
Displays playback information or settings.
7 e (Pause)
3
(Eject)
8 h (Play)
Starts disc playback. (page 11)
Ejects a disc in the unit.
Note
Do not push the ejected disc when reloading it. To reload the
ejected disc, press
or h, or remove the disc from the disc
loading slot fully, then insert it to the disc loading slot once again.
4 s (Stop)
Stops disc playback. (page 11)
5 Remote control sensor
Receives signals from the remote control.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
■ Remote control
Read the following for the function of each button. The buttons shaded in the illustration below are used to control the
YAMAHA AV amplifier “AVC-S30” (included if you purchase DVX-S30). For details on AVC-S30 operations, refer to
the “AVX-S30 OWNER’S MANUAL”.
*
5 TV INPUT
1
Switches the TV inputs.
*
STANDBY/ON
6 TV CH +/–
STANDBY/ON
DVD
2
3
F
Switches the TV channels.
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
7
(Play)
ZOOM
8
G
H
REPEAT
A-B
AUDIO SUBTITLE
9
0
8
(Pause)
SHIFT
4*
5*
I
J
K
L
TV
TV INPUT
Pauses disc playback. (page 11)
DUAL MONO
9 ON SCREEN
6*
TV CH
qVS
7
8
9
0
M
N
0
,
,
,
, ENTER
ON SCREEN
SETUP
Operates the On-Screen Menu or specify various
parameters.
Press
ENTER
to slow reverse and press
to slow forward.
MENU
RETURN
O
P
A
TV VOL
VOLUME
,
(Search)
MUTE
NIGHT
Fast forwards/fast reverses disc playback with a specific
speed. (page 11)
B*
Q
R
S
A MENU
TEST
L
R
1
2
C
D
playing back a VCD, press this button to display or close
the Playback Control menu. (page 16)
INPUT
3
4
MODE
MOVIE
MUSIC SPORTS GAME
E
*
B TV VOLUME +/–
Adjusts the TV volume level.
C TEST
Outputs a test tone on the AVC-S30.
*
To control your TV with these buttons, you need to set the
appropriate remote control code. (page 29)
D MODE
Switches between Dolby Pro Logic II modes on the AVC-
S30.
1 Infrared signal transmitter
Sends signals to the units.
E CINEMA DSP buttons
Selects a CINEMA DSP program on the AVC-S30.
2 STANDBY/ON (
Turns the AVC-S30 on, or set it to the standby mode.
)
F STANDBY/ON (DVD)
Turns the DVD-S30 on, or set it to the standby mode.
3 Number buttons (1 to 9, 0)
Input numerals to specify parameters such as track or
chapter numbers.
y
When the unit is in the standby mode, the unit consumes a small
*
amount of power.
4 TV
Turns the TV on, or set it to the standby mode.
G SUBTITLE
Selects the subtitle language of the DVD video. (page 15)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
H AUDIO
S INPUT buttons
Selects the audio language of the DVD video or the audio
channel setting of the video CD and super video CD.
Select an input source volume on the AVC-S30.
L/R buttons
While a test tone is output volume on the AVC-S30, press
L to set the orientation of the virtual surround speaker (L),
and press R to set the orientation of the virtual surround
speaker (R).
I SHIFT
While holding down SHIFT, press a button below to
enable the corresponding operation.
SW +/–: Adjusts the subwoofer channel volume on the
AVC-S30.
CENTER +/–: Adjusts the center speaker channel volume
on the AVC-S30.
SURR +/–: Adjusts the surround speaker channel volume
on the AVC-S30.
J qVS (Dolby Virtual Speaker)
Turns on/off the DVS mode on the AVC-S30.
K DUAL MONO
(Taiwan model only)
Switches audio outputs (main audio and sub audio) on the
AVC-S30 when multiple audio signals are input into the
AVC-S30.
L
,
(Skip)
Skips to the start of current track or next track. (page 11)
Press and hold to fast reverse or to fast
forward disc playback. (page 11)
M
(Stop)
Stops disc playback. (page 11)
N SETUP
Displays the Setup menu on the TV.
O RETURN
Returns the disc menu to the previous screen. (page 16)
P MUTE
Turns off the volume on the AVC-S30.
Q VOLUME +/–
Adjusts the overall volume level volume on the AVC-S30.
R NIGHT
Turns on/off the Night Listening mode volume on the
AVC-S30.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
Connections
This section explains how to connect the DVD-S30 to your TV or external AV amplifier (AVC-S30 etc.). For connections
related to external AV amplifier, refer to the manual for it.
Note
Connect the power cord of the DVD player or external components after connection of all cables are complete.
SCART (U.K.
model only)
TV (monitor)
VIDEO
INPUT
Video pin cable
(supplied)
to AC outlet
MAINS
AV amplifier
VIDEO OUT
COMPONENT
Y
PB
(AVC-S30 etc.)
L
DIGITAL
OUT
VOLUME
1
2
3
4
INPUT
PCM/
DIGITAL
/MPEG
STANDBY/ON
MOVIE
MUSIC
SPORTS
GAME
R
MODE
q
OPTICAL
OPTICAL DIGITAL
INPUT
VIDEO
PR
qPro Logic II
AUDIO OUT
NIGHT
qDigital
DTS
-4
AAC
-2
MAIN/SUB
AUTO
+2
MOVIE
MUSIC
DVS
1
2
3
4
5
6
7
8
9
-8
-6
0
+4
+6
+8
SILENT CINEMA
Optical cable (supplied)
Other video connections
(to enjoy high quality pictures)
Other audio connection
To make analog audio connection instead of digital
connection using the optical cable, connect AUDIO OUT
(L, R) jacks of the DVD-S30 and audio input jacks of the
AV amplifier using a commercially available audio pin
cable.
• To make component video connection instead of video
connection using the supplied video pin cable, connect
COMPONENT (Y, PB, PR) jacks of the DVD-S30 and
component video input jacks of the TV using a commercially
available component video cable.
• To make SCART connection (U.K model only) instead of video
connection using the supplied video pin cable, connect SCART
jack of the DVD-S30 and SCART input jack of the TV using a
commercially available SCART cable.
y
COMPONENT jacks can output a progressive scan signal. To
enjoy high quality DVD video with progressive scan mode, set
6
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
Using the Remote Control
Use the remote control within 6 m (20 feet) of the DVD
player and point it toward the remote control sensor.
Notes
s
STANDBY/ON
p
• Be careful not to spill liquid on the remote control.
• Be careful not to drop the remote control.
• Do not leave the remote control in the following places:
– hot or humid places, such as near a heater or in a bathroom
– extremely cold places
e
Within 6 m
(20 feet)
30˚
30˚
– dusty places
■ Replacing the batteries
If the batteries grow old, the effective operation distance of the remote control decreases considerably. If this happens, replace the
batteries with two new ones as soon as possible.
1
2
Press the
slide off the cover.
mark on the battery cover and
Insert two new batteries (AA, R06, UM-3) into
the battery compartment.
Press
Make sure you insert the batteries according to the
polarity markings (+ and –).
3
Close the battery cover.
Notes
• Do not use an old battery together with new one.
• Do not use different types of batteries (for example, alkaline and manganese) together. Each type of battery has its own characteristics
even if they are similar in shape.
• If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.
• Dispose of the batteries according to the regional regulations.
• If a battery starts leaking, dispose of it immediately. Be careful not to let leaking battery acid come into contact with your skin or
clothing. Before inserting new batteries, wipe the compartment clean.
• Replace the batteries within two minutes to preserve the memory in the remote control.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
Getting Started
Before starting playback operation, follow the procedure below to set up the DVD player settings.
■ Step 2: Setting the TV color
STANDBY/ON
STANDBY/ON
system
STANDBY/ON
(DVD)
DVD
ANGLE
This unit is compatible with both NTSC and PAL. Select
the color system that matches your TV. (The default
setting is “PAL” for U.K. and Australia models and
“MULTI” for Taiwan and Asia models)
1
2
3
4
SW
CENTER
SURR
ZOOM
Number
buttons
5
6
7
8
REPEAT
A-B
AUDIO SUBTITLE
9
0
SHIFT
TV
TV INPUT
DUAL MONO
VIDEO SETUP PAGE
TV CH
qVS
TV TYPE
PAL
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
MULTI
NTSC
ON SCREEN
SETUP
SETUP
ENTER
,
,
SET TV STANDARD
MENU
RETURN
,
, ENTER
TV VOL
VOLUME
MUTE
NIGHT
1
2
Press SETUP to display the Setup menu on
the TV.
TEST
L
R
1
2
INPUT
Press
or
to select “VIDEO SETUP
or to select “TV TYPE”,
MODE
MOVIE
3
4
MUSIC SPORTS GAME
PAGE”, press
and then press
.
3
Press
or
to select “PAL”, “MULTI” or
“NTSC”, and then press ENTER.
PAL:
Select this if your TV employs PAL system.
MULTI:
■ Step 1: Turning on the power
Select this if your TV is compatible with both PAL
and NTSC. The output format will be in accordance
with the video signal of the disc.
NTSC:
1
Turn on the TV and AV amplifier (AVC-S30
etc.), and then press STANDBY/ON (DVD) to
turn on the DVD player (DVD-S30).
The front panel display turns on.
Select this if your TV employs NTSC system.
y
This unit has the auto-sleep function which automatically
switches to the standby mode if you do not operate the unit
for about 30 minutes while playback is stopped.
2
Select the DVD input on the TV and AV
amplifier (AVC-S30 etc.).
The default screen appears on the TV.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
■ Step 4: Setting the disc language
4
Press
ENTER.
or
to select “OK”, and then press
(audio, subtitle, disc menu)
If you set the disc language, this unit will automatically
switch to the selected language (for audio, subtitle and
disc menu) when a disc is loaded. If the selected language
is not available on the disc, the disc’s default language will
be used instead. (The default setting is “ENGLISH” for
audio and disc menu and “OFF” for subtitle.)
CHANGING MULTI TO PAL:
1.ENSURE THAT YOUR TV SUPPORTS
PAL STANDARD.
2.IF THERE IS
DISPLAYED ON THE TV. WAIT 15
SECONDS FOR AUTO RECOVER.
A
DISTORTED PICTURE
OK
CANCEL
PREFERENCE PAGE
CONFIRM AGAIN TO USE NEW TV
TYPE SETTING.
AUDIO
ENGLISH
CHINESE
JAPANESE
KOREAN
SUBTITLE
DISC MENU
PARENTAL
PBC
OK
CANCEL
FRENCH
MP3
/
JPEG NAV
SPANISH
VR LIST
PROTUGUESE
y
To return to the previous menu, press . To close the Setup
PREFERRED AUDIO LANGUAGE
menu, press SETUP.
Notes
1
2
Press SETUP to display the Setup menu on
the TV.
• When using a wide-screen TV, set “TV DISPLAY” in “VIDEO
• Setting an incorrect TV color system distorts the picture on the
TV and makes menu operations difficult. To switch the TV
Press
press
to select “PREFERENCE PAGE”,
or to select “AUDIO”,
“SUBTITLE” or “DISC MENU”, and then
color system (NTSC and PAL) in such a case, press
and then
press
.
AUDIO while no disc is inserted (“NO DISC” appears on the
front panel display).
Note
■ Step 3: Setting the OSD language
You can select a language used for the on-screen display.
(The default setting is “ENGLISH”.)
“PREFERENCE PAGE” is available only when no disc is
inserted or the unit is in the Stop mode (page 11).
3
Press
then press ENTER.
or
to select a language, and
GENERAL SETUP PAGE
If the desired language is not listed, select
“OTHERS”, use the Number buttons to enter the 4-
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
ENGLISH
FRANÇAIS
y
To return to the previous menu, press . To close the Setup
menu, press SETUP.
SET OSD LANGUAGE
1
2
Press SETUP to display the Setup menu on
the TV.
Press
PAGE”, press
LANGUAGE”, and then press
or
to select “GENERAL SETUP
or to select “OSD
.
3
Press
then press ENTER.
or
to select a language, and
y
To return to the previous menu, press . To close the Setup
menu, press SETUP.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Supported Disc Types
You can enjoy movie or music discs with this unit. Since some disc operations are limited to specific disc types, the
supported disc types are indicated using the icons shown below. Each icon means that the operation is limited to the
corresponding disc type. Operations with no icon indicated are available for all disc types.
VIDEO CD/
SUPER VIDEO CD
DVD/DVD-VR
DVD
Music CD
CD
VCD
You can play MP3 files recorded on a CD-R or CD-RW
About MP3 and JPEG picture discs
with similar uses as a music CD. The DVD player regards
folders in the MP3 disc as albums, and files as tracks (as
shown on the left). Also you can play JPEG picture files
recorded on a CD-R or CD-RW. For details about how to
play JPEG picture discs, refer to “Playing MP3 or JPEG
Root
Album (Folder)
Track (File)
What is MP3?
“MP3” is a standard technology and format for
compressing an audio sequence into a small-sized file.
However it preserves the original level of sound quality
when it is played.
Notes
• Depending on recording conditions such as recording software
settings, the DVD player may not be able to play the disc or
play tracks in the order they were recorded.
• The DVD player is compatible with a bit rate range of 32, 64,
96, 128, 192, or 256 kbps and variable bit encoded MP3 files.
• The DVD player is compatible with a sampling frequency of 32,
44.1, or 48 kHz.
What is JPEG?
“JPEG” is a compression format for still images. With
only a slight drop in image quality (part of the data is
removed), still image data can be compressed to
approximately 1/10 to 1/100 of its original size.
Note
This unit does not support the progressive JPEG format.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Basic Playback Operations
Follow the procedures below to carry out basic disc playback operations.
DVD
VCD
To advance frame-by-frame
Notes
• If the inhibit icon (
is pressed, it means the function is not available on the current
disc or the current status.
or
) appears on the TV when a button
Press
to pause playback, then press repeatedly.
Each time you press , playback advances one frame at a
time. To return to normal playback, press
.
• Depending on the disc, some operations may be different or
restricted.
To fast reverse or fast forward
STANDBY/ON
STANDBY/ON
DVD
To fast reverse, press
. To fast forward, press
.
ANGLE
Each time you press the button, the speed increases
(decreases).
1
SW
5
2
CENTER
6
3
SURR
7
4
ZOOM
Number
buttons
8
REPEAT
A-B
AUDIO SUBTITLE
y
9
0
SHIFT
You can also fast-reverse or fast-forward the playback by pressing
TV
TV INPUT
and holding
or
or
, and change the speed by pressing
DUAL MONO
during search.
TV CH
qVS
,
DVD
VCD
To slow reverse or slow forward
ON SCREEN
SETUP
,
To slow reverse press . To slow forward, press
.
ENTER
Each time you press the button, the speed increases
(decreases).
MENU
RETURN
,
TV VOL
VOLUME
y
MUTE
The Slow reverse feature is not available for VCDs and SVCDs.
To skip chapters (tracks)
To start playback
To skip to the start of the current chapter (track), press
.
Insert the disc into the disc loading slot.
y
To skip to the next chapter (track), press
.
This unit automatically starts playback when a disc is loaded. In
case that the disc has the start menu, you may need to press
start playback.
To skip to the previous chapter (track), quickly press
twice.
to
Note
To stop playback
The Skip feature may not work properly when playing back a
Press
.
y
To specify a chapter (track) for playback
This unit automatically memorizes the stopping position when
playback is stopped. If you press
where it left off. If you press
will be cleared from the memory. (This is called “Stop mode”)
, playback resumes from
once again, the stopping position
Use the Number buttons to enter the chapter (track)
number you want to play.
To specify 1-digit number, press a number key to enter the
track number and then ENTER, or press 0 and then a
number key to enter the track number.
To pause playback
Press
.
To return to normal playback, press
.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Repeating Playback (Repeat Play)
You can repeat single chapter (track), single title, or entire disc. Also, you can set two points to repeat the specified
section of a title (track) with A-B Repeat.
■ To repeat between two points
Notes
(A-B Repeat)
• Repeat Play may not work depending on DVD disc types.
You can repeat the specified section of a title (track) by
• The Shuffle feature is not available for DVD-VRs.
setting two points (start and end points).
• Repeat Play does not work while playing back a VCD or SVCD
using the Playback Control feature (page 16).
Note
You can use A-B Repeat only within one title (track).
STANDBY/ON
STANDBY/ON
DVD
1
2
Play back the title or track that includes the
section you want to repeat.
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
ZOOM
8
A–B
REPEAT
A-B
AUDIO SUBTITLE
9
0
REPEAT
At the position where you want to set as the
start point of the repeat section, hold down
SHIFT and press A–B.
SHIFT
TV
TV INPUT
SHIFT
DUAL MONO
TV CH
qVS
“A” appears on the TV.
3
At the position where you want to set as the
end point of the repeat section, hold down
SHIFT and press A–B again.
1
2
Play back the disc, title, or chapter (track)
you want to repeat.
“AB” appears on the TV and A-B Repeat starts.
While holding down SHIFT, press REPEAT to
select the Repeat Play mode.
Each time you press the button, the mode changes as
follows:
To cancel A-B Repeat
While holding down SHIFT, press A–B once.
DVD/DVD-VR
↓
OFF (Normal playback)
↓
CHAPTER (Repeat Play by chapter)
↓
TITLE (Repeat Play by title)
↓
ALL (Repeat Play by disc)
↓
SHUFFLE (Playback at random order)
VCD/SVCD/CD
↓
OFF (Normal playback)
↓
TRACK (Repeat Play by track)
↓
ALL (Repeat Play by disc)
↓
SHUFFLE (Playback at random order)
To cancel Repeat Play
While holding down SHIFT, press REPEAT to select
“OFF”.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Specifying an elapsed time for
playback (Time Search)
You can specify an elapsed time where you want playback
to start.
2
Press
or
to select “TT TIME” or
“CH TIME”, and then press
TT TIME:
Select this if you want to specify an elapsed time for
the current title.
.
CH TIME:
Notes
Select this if you want to specify an elapsed time for
the current chapter.
• Using the Time Search feature for a VCD or SVCD
• You cannot specify an elapsed time that exceeds the total time.
3
Use the Number buttons to enter hours,
minutes, and seconds.
Playback skips to the specified position.
STANDBY/ON
STANDBY/ON
DVD
y
ANGLE
To return to the previous menu, press . To close the On-Screen
menu, press ON SCREEN.
1
SW
5
2
CENTER
6
3
SURR
7
4
ZOOM
Number
buttons
8
REPEAT
A-B
AUDIO SUBTITLE
9
0
■ Time Search on VCD/SVCD
SHIFT
TV
TV INPUT
DUAL MONO
1
While playing back a disc, press ON SCREEN
to display the On-Screen menu on the TV.
TV CH
qVS
MENU
TRACK
01 / 01
1:06:33
1:06:33
OFF
ON
SCREEN
ON SCREEN
SETUP
DISC TIME
TRACK TIME
REPEAT
,
,
,
ENTER
BITRATE 44
TOTAL ELAPSED 0:00:06
MENU
RETURN
TV VOL
VOLUME
2
Press
or
to select “DISC TIME” or
MUTE
“TRACK TIME”, and then press
DISC TIME:
Select this if you want to specify an elapsed time for
.
■ Time Search on DVD
the entire disc.
1
While playing back a disc, press ON SCREEN
to display the On-Screen menu on the TV.
TRACK TIME:
Select this if you want to specify an elapsed time for
the current track.
MENU
TITLE
CHAPTER
AUDIO
01 / 03
01 / 28
3 / 2.1CH
OFF
3
Use the Number buttons to enter hours,
minutes, and seconds.
ENGLISH
SUBTITLE
BITRATE 44
TT ELAPSED 0:00:06
Playback skips to the specified position.
y
To return to the previous menu, press . To close the On-Screen
menu, press ON SCREEN.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
■ Time Search on CD
Customizing Playback Order
(Program Play)
You can customize the playback order for chapters or
tracks stored in the disc. This unit can memorize playback
order of 10 discs (20 chapters or 20 tracks for each disc).
1
Press ON SCREEN repeatedly to select
“DISC GO TO”, “TRACK GO TO” or “SELECT
TRACK”.
↓
DISC GO TO:
(Specify an elapsed time for the entire disc)
Notes
↓
TRACK GO TO:
Program Play of a VCD or SVCD.
• The Program Play feature is not available for MP3 and JPEG
(Kodak) discs.
(Specify an elapsed time for the current track)
↓
SELECT TRACK:
(Specify a track number)
STANDBY/ON
STANDBY/ON
DVD
2
Use the Number buttons to enter hours,
minutes, and seconds (or track number if you
Playback skips to the specified position.
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
ZOOM
Number
buttons
8
REPEAT
A-B
AUDIO SUBTITLE
9
0
SHIFT
TV
TV INPUT
DUAL MONO
qVS
TV CH
,
ON SCREEN
SETUP
SETUP
ENTER
,
,
,
,
MENU
RETURN
ENTER
TV VOL
VOLUME
MUTE
1
2
While the disc is loaded in the unit, press
SETUP to display the Setup menu on the TV.
Pres
PAGE”, pres
“PROGRAM”, and then press
s
or to select “GENERAL SETUP
s
or to select
.
3
4
Press ENTER to display the Input menu.
Press
number, and then press ENTER.
Pressing or switches the program list to
the previous/next page.
,
,
or to select a program
5
To program the order for a DVD disc, use the
Number buttons and ENTER to enter a title
number, and then enter a chapter number.
To program the order for a VCD, SVCD, or CD,
use Number button and ENTER to enter a
track number.
chapters (tracks).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
DVD
VCD
6
To start playback with the Program Play
feature, pres or to select
“START”, and then press ENTER.
Zooming the Picture
s
,
,
You can zoom in or zoom out the picture during disc
playback.
y
• To cancel the Program Play feature, pres
select “Exit” in the program list, then press ENTER.
• To remove a chapter or track from Program Play, pres
s
,
,
or to
STANDBY/ON
STANDBY/ON
DVD
s
ANGLE
,
,
or to select the program number, then press
1
SW
5
2
CENTER
6
3
SURR
7
4
ZOOM
ENTER.
8
ZOOM
SHIFT
REPEAT
A-B
AUDIO SUBTITLE
9
0
SHIFT
TV
TV INPUT
Selecting Audio and Subtitle
Languages
DUAL MONO
TV CH
qVS
DVD
VCD
You can select audio and subtitle languages for disc
playback. If no language is selected, the default languages
ON SCREEN
SETUP
ENTER
,
,
,
MENU
RETURN
Notes
TV VOL
VOLUME
• This selection is available only with multi-language compatible
discs. Also, languages available for each disc may vary. For
information on your disc, refer to the operating instructions in
the disc’s menu or on its jacket.
• For VCDs and SVCDs, you can switch the audio channel
settings (stereo, monaural, etc.) by pressing AUDIO. You
cannot select audio and subtitle languages for those discs.
MUTE
1
While playing back a disc, hold down SHIFT
and press ZOOM repeatedly.
Each time you press the button, the picture scale
changes as follows.
2X → 3X → 4X → 1/2 → 1/3 → 1/4 → original scale (1X)
STANDBY/ON
STANDBY/ON
↑
DVD
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
2
If you select “2X”, “3X” or “4X” in step 1,
ZOOM
8
pres
s
,
,
or to pan through the
AUDIO
REPEAT
A-B
AUDIO SUBTITLE
9
0
SUBTITLE
enlarged picture.
SHIFT
TV
TV INPUT
y
To return to the original picture scale, hold down SHIFT and
press ZOOM repeatedly to select the original scale.
DUAL MONO
TV CH
qVS
To select an audio language, while playing back a
disc, press AUDIO repeatedly until the desired
language appears on the TV.
To select a subtitle language, while playing back
a disc, press SUBTITLE repeatedly until the
desired language appears on the TV.
y
To turn off the subtitle, press SUBTITLE repeatedly to select
“OFF”.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
DVD
■ To operate the DVD menu
DVD
Selecting a Viewing Angle
1
Press MENU to display the DVD menu on the
TV.
You can select the desired viewing angle during DVD
playback.
y
Note
Depending on the disc, the DVD menu may automatically appear
after the disc is loaded.
This selection is available only with multi-angle compatible discs.
Also, viewing angles available for each disc may vary. For
information on your disc, refer to the operating instructions in the
disc’s menu or on its jacket.
2
Press
,
,
or
to select a menu
item, then press ENTER to confirm the
selection.
STANDBY/ON
STANDBY/ON
DVD
■ To operate the Playback Control
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
ANGLE
SHIFT
VCD
menu
ZOOM
8
If you play back a VCD or SVCD that includes the
Playback Control feature, the menu automatically appears
on the TV. To operate the Playback Control menu with this
unit’s remote control, use the following buttons.
REPEAT
A-B
AUDIO SUBTITLE
9
0
SHIFT
TV
TV INPUT
DUAL MONO
TV CH
qVS
Number buttons: Selects an item.
: Moves to the next screen.
or RETURN: Returns to the previous screen.
ENTER: Confirms the selected item.
MENU: Displays or closes the Playback Control menu.
While playing back a disc, hold down SHIFT and
press ANGLE repeatedly until the desired
viewing angle is selected.
y
If you set “PBC” in the Setup menu to “OFF” (page 23), the
Playback Control menu is not displayed automatically when
playing back a disc.
Operating the Disc Menu
Many DVD and VCD (SVCD) include original
navigational menus called “DVD menu” and “Playback
Control menu”. These menus provide a convenient way to
operate the disc. Follow the procedure below to use a
DVD menu or Playback Control menu with this unit.
Note
Menu contents or operation method of each disc may vary. For
information on your disc, refer to the operation instructions in the
disc’s menu or on its jacket.
STANDBY/ON
STANDBY/ON
DVD
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
ZOOM
Number
buttons
8
REPEAT
A-B
AUDIO SUBTITLE
9
0
SHIFT
TV
TV INPUT
DUAL MONO
qVS
TV CH
,
ON SCREEN
SETUP
,
,
,
,
ENTER
ENTER
MENU
RETURN
MENU
RETURN
TV VOL
VOLUME
16
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Restricting Playback
DVD
You can set playback restrictions for certain discs using Parental Control. Only users who know the password (page 18)
can access the locked discs.
4
Press the number buttons to enter the 6-digit
password, then press ENTER.
■ Setting the Parental Control level
You can restrict playback according to a predetermined
level (Parental Control level). For information on the
Parental Control level of each disc, refer to the instruction
on its jacket.
Notes
• The default password is “000000”. To change the password,
• If you forget your password, enter “000000” instead of entering
your password.
STANDBY/ON
STANDBY/ON
DVD
y
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
• To return to the previous menu, press . To close the Setup
menu, press SETUP.
ZOOM
Number
buttons
8
REPEAT
A-B
AUDIO SUBTITLE
• To unlock the Parental Control temporarily for playback, use
the Number buttons to enter the password in the password input
area (displayed when the locked disc is loaded), and then press
ENTER.
9
0
SHIFT
TV
TV INPUT
DUAL MONO
qVS
TV CH
■ Locking discs
You can prevent up to 40 specific discs from playback by
locking the discs.
ON SCREEN
SETUP
SETUP
ENTER
,
,
,
,
STANDBY/ON
STANDBY/ON
ENTER
MENU
RETURN
DVD
TV VOL
VOLUME
ANGLE
MUTE
1
SW
5
2
CENTER
6
3
SURR
7
4
ZOOM
Number
buttons
8
REPEAT
A-B
AUDIO SUBTITLE
9
0
1
2
Press SETUP to display the Setup menu on
the TV.
SHIFT
TV
TV INPUT
DUAL MONO
qVS
TV CH
Press
or
to select “PREFERENCE
or to select
PAGE”, press
“PARENTAL”, and then press
.
ON SCREEN
SETUP
SETUP
ENTER
,
,
,
,
PREFERENCE PAGE
MENU
RETURN
ENTER
AUDIO
2
3
4
5
6
7
8
G
PG
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3 / JPEG NAV
VR LIST
TV VOL
VOLUME
PG 13
PGR
R
NC17
ADULT
MUTE
1
2
3
While the disc to be locked is loaded into the
unit, press SETUP to display the Setup menu
on the TV.
SET PARENTAL CONTROL
Note
“PREFERENCE PAGE” is available only when no disc is
Press
PAGE”, press
LOCK”, and then press
or
to select “GENERAL SETUP
or
to select “DISC
.
3
Press
or
to select a Parental Control
level, and then press ENTER.
Press
or
to select “LOCK”, and then
1 to 7: Users cannot play a disc that is rated above the level
without entering the password. (The smaller the number, the
stricter the Parental Control level.)
press ENTER.
8 (Default setting): Users can play all discs without
entering the password.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
To disable a lock applied to a disc
Playing MP3 or JPEG (Kodak)
Picture Discs
Select “UNLOCK” in step 3.
y
• To return to the previous menu, press . To close the Setup
You can play back MP3 data recorded on a CD-R or
CD-RW disc, or view a JPEG disc or Kodak disc on the
TV. For information on basic playback operations, refer to
menu, press SETUP.
• To unlock the Disc Lock temporarily for playback, use the
Number buttons to enter the password in the password input
area (displayed when the locked disc is loaded), and then press
ENTER.
Notes
■ Changing the password
Follow the procedure below to change the password to
access locked disc temporarily.
• This unit cannot display special characters such as double-byte
characters used for folder and file names.
• Depending on the disc format, characteristics, or recording
conditions, the unit may not read or play back some discs
properly.
1
2
Press SETUP to display the Setup menu on
the TV.
• If a disc contains a folder consisted of more than 500 files, the
unit may not read or play back the disc properly.
Press
or
to select “PREFERENCE
or to select
PAGE”, press
STANDBY/ON
STANDBY/ON
DVD
“PASSWORD”, then press
.
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
Number
buttons
ZOOM
Note
8
REPEAT
A-B
AUDIO SUBTITLE
“PREFERENCE PAGE” is available only when no disc is
inserted or the unit is in the Stop mode (page 11).
9
0
SHIFT
TV
TV INPUT
DUAL MONO
3
4
Press ENTER to display the Password
change screen.
TV CH
qVS
ON SCREEN
SETUP
Use the Number buttons to enter the current
6-digit password in the “OLD PASSWORD”
area, enter the new 6-digit password in the
“NEW PASSWORD” and “CONFIRM PWD”
areas, then press ENTER.
,
,
,
,
ENTER
ENTER
MENU
RETURN
TV VOL
VOLUME
MUTE
Notes
1
Insert the disc into the disc loading slot.
For a Kodak disc, the slide show starts automatically.
If it does not start, press
For an MP3 or JPEG disc, the disc menu appears on
the TV. To start the slide show for the JPEG disc,
• The default password is “000000”.
• If you forget your password, enter “000000” instead of your
password.
.
y
To return to the previous menu, press . To close the Setup
menu, press SETUP.
press
.
2
3
Press
or
to select a folder, then press
ENTER.
The file list of the selected folder appears on the TV.
Press
,
, or Number buttons to select a
file, then press ENTER.
Playback starts from the selected file to the end of the
folder.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
y
• While playing back a JPEG (Kodak) picture disc, you can zoom
in or zoom out the picture by pressing ZOOM repeatedly while
holing down SHIFT. Also, you can pan through the enlarged
Setting the Remote Control Code
on the remote control of this unit, you can operate the
specific functions of your TV with the remote control.
picture by pressing
• While playing back a JPEG (Kodak) picture disc, you can flip the
picture by pressing or flip the picture horizontally by pressing
. Also you can rotate it 90 degrees by pressing or
,
,
or
.
.
Note
• While playing back a JPEG (Kodak) picture disc, you can select a
scan effect by pressing ANGLE repeatedly while holing down SHIFT.
• For an MP3 or JPEG (Kodak) picture disc, you can set the playback
mode by pressing REPEAT repeatedly while holing down SHIFT.
Depending on the product, this unit’s remote control may not be
able to operate some TVs. In this case, use the remote control
supplied with the TV.
↓
STANDBY/ON
STANDBY/ON
SHUFFLE
DVD
(Plays back all files in the current folder at
random order)
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
↓
ZOOM
Number
buttons
8
SINGLE
REPEAT
A-B
AUDIO SUBTITLE
(Plays back the selected file once, then
returns to the menu)
9
0
SHIFT
TV
TV INPUT
SHIFT
TV
↓
REPEAT ONE
DUAL MONO
(Shows the selected JPEG image, or plays
back the selected MP3 file repeatedly)
TV CH
qVS
TV CH +/–
TV INPUT
↓
REPEAT FOLDER
ON SCREEN
SETUP
(Plays back all files in the selected folder
repeatedly)
ENTER
↓
FOLDER
MENU
RETURN
(Plays back all files in the selected folder
once, then returns to the menu)
TV VOL
VOLUME
MUTE
NIGHT
TV VOL +/–
■ Viewing JPEG (Kodak) pictures in
TEST
L
R
1
2
thumbnailed form
You can view the content of the selected folder or disc as
small thumbnail images.
INPUT
MODE
MOVIE
3
4
MUSIC SPORTS GAME
1
While playing back a JPEG (Kodak) picture
disc, press
The JPEG pictures appear in thumbnailed form.
Pressing or switches the thumbnail list to
the previous/next page.
.
1
2
While holding down SHIFT, press TV
,
then while still holding down SHIFT, use the
Number buttons to enter the three-digit
remote control code (page 29).
The default setting is “242 (Yamaha)”.
Carry out one of the following operation to
check if the remote control works on the TV.
If it does not work, try another remote control code (if
there is another choice).
2
To view a specified picture in full size, press
or to select a thumbnail image,
then press ENTER.
TV
mode.
: Turn the TV on, or set it to the standby
,
,
TV INPUT: Switches the TV inputs.
TV VOL +/–: Adjusts the TV volume level.
TV CH +/–: Switches the TV channels.
y
• To start the slide show from the first picture of the current page,
press or to select , then press ENTER.
• To return to the disc menu, press MENU.
,
,
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Changing Playback Settings on the TV (On-Screen Menu)
You can view and change the settings for the current DVD or VCD (SVCD) playback using the TV (On-Screen menu).
Note
Displaying the On-Screen menu for a VCD or SVCD automatically closes the Playback Control menu (page 16).
y
Although the On-Screen menu is shown in English in the procedure below, you can display the menu in other language by setting the
1
While playing back a disc, press ON SCREEN
to display the On-Screen menu on the TV.
The On-Screen menu shows the settings for the
current playback. Depending on the disc currently
played back, items of the On-Screen menu vary.
STANDBY/ON
STANDBY/ON
DVD
ANGLE
1
2
3
4
SW
CENTER
SURR
ZOOM
Number
buttons
5
6
7
8
REPEAT
A-B
AUDIO SUBTITLE
9
0
SHIFT
2
3
To change the settings, press
or
to
TV
TV INPUT
select an item, then press
.
DUAL MONO
TV CH
qVS
To select a parameter, press
press ENTER. To enter numbers or time, use
the number buttons.
or
, then
ON
SCREEN
ON SCREEN
SETUP
ENTER
,
,
,
,
y
MENU
RETURN
ENTER
To return to the previous menu, press . To close the On-Screen
menu, press ON SCREEN.
TV VOL
VOLUME
MUTE
■ On-Screen menu items
Items for DVD
Description
The current title and the number of titles in the disc
The current chapter and the number of chapters in the disc
The current settings for audio channels and audio language
The current setting for subtitle language
TITLE
CHAPTER
AUDIO
SUBTITLE
ANGLE
The current angle and the number of angles in the disc
The total time of the current title
TT TIME
CH TIME
REPEAT
TIME DISP.
The total time of the current chapter
The current setting for the Repeat Play feature
The current setting for the time display
Items for VCD/SVCD
TRACK
Description
The current track and the number of track in the disc
The total time of the disc
DISC TIME
The total time of the current track
TRACK TIME
REPEAT
The current setting for the Repeat Play feature
The current setting for the time display
TIME DISP.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Configuring the Various
Parameters (Setup Menu)
In the Setup menu, you can configure the various
parameters or operate useful functions. Follow the
procedure below to operate the Setup menu. For details on
each menu or available parameters, refer to “Setup menu
1
2
Press SETUP to display the Setup menu on
the TV.
Press
or
to select “GENERAL SETUP
PAGE”, “AUDIO SETUP PAGE”, “VIDEO
SETUP PAGE” or “PREFERENCE PAGE”.
Note
“PREFERENCE PAGE” is available only when no disc is
inserted or the unit is in the Stop mode (page 11).
STANDBY/ON
STANDBY/ON
DVD
ANGLE
1
SW
5
2
CENTER
6
3
SURR
7
4
3
Press
then press
If the selected menu contains one submenu, press
ENTER.
or
to select the desired menu,
ZOOM
Number
buttons
8
.
REPEAT
A-B
AUDIO SUBTITLE
9
0
SHIFT
TV
TV INPUT
If the selected menu contains two or more submenus,
DUAL MONO
press
or
to select the desired submenu, then
TV CH
qVS
press ENTER.
ON SCREEN
SETUP
4
Press
or
to select the desired
SETUP
parameter, then press ENTER.
For configuring some parameters, you need to enter
the password by pressing the Number buttons.
,
,
,
,
ENTER
ENTER
MENU
RETURN
TV VOL
VOLUME
y
MUTE
NIGHT
To return to the previous menu, press . To close the Setup
menu, press SETUP.
TEST
L
R
1
2
INPUT
MODE
MOVIE
3
4
MUSIC SPORTS GAME
21
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
■ Setup menu items
Page
Menu
Submenu
Parameter
GENERAL
SETUP PAGE
DISC LOCK
DISPLAY DIM
You can set brightness for the front panel display. (Default: 100%)
100%: Full brightness
70%: Medium brightness
40%: Dimming the front panel display
PROGRAM
INPUT MENU
OSD LANGUAGE
SCREEN SAVER
The screen saver function allows you to prevent the TV screen from burn-in.
(Default: ON)
ON: Turns off the TV screen when disc playback is stopped or paused for more than
15 minutes.
OFF: Disables the screen saver function.
The sleep function allows you to turn off this unit automatically after a preset time.
(Default: OFF)
SLEEP
15 MINS: Turns off this unit after 15 minutes.
30 MINS: Turns off this unit after 30 minutes.
45 MINS: Turns off this unit after 45 minutes.
60 MINS: Turns off this unit after 60 minutes.
OFF: Disables the sleep function.
You can configure the analog output setting. (Default: STEREO)
STEREO: Delivers sounds from only the two front speaker channels.
LT/RT: Delivers sounds from the multi speaker channels.
AUDIO
SETUP PAGE
ANALOG OUTPUT
You can configure the digital output setting according to your optional audio
equipment connections. (Default: ALL)
DIGITAL
AUDIO
DIGITAL
OUTPUT
OFF: Disables the digital output.
ALL: Select this if you connect this unit to a multi-channel decoder/amplifier using a
digital connection.
PCM ONLY: Select this if your amplifier is not capable of decoding multi-channel
audio.
If you connect this unit to a PCM compatible amplifier using a digital connection,
configure the LPCM output setting. The higher the sampling rate, the better the sound
quality.
LPCM
OUTPUT
(Default: 48KHz)
48KHz: Plays back a disc recorded at the sampling rate of 48 kHz.
96KHz: Plays back a disc recorded at the sampling rate of 96 kHz.
CD UPSAMPLING *1
You can convert your music CD to a higher sampling rate using sophisticated digital
signal processing for better sound quality. If you have activated the upsampling, this
unit will automatically switch to stereo mode. (Default: OFF)
OFF: Disables the CD upsampling function.
88.2KHz (X2): Converts the sampling rate of the CDs twice higher than original.
176.4KHz (X4): Converts the sampling rate of the CDs for times higher than original.
*1 “CD UPSAMPLING” is available only when a music CD is loaded in this unit.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Page
Menu
Submenu
Parameter
Taiwan and Asia models)
VIDEOSETUP TV TYPE
*2
PAGE
You can set the aspect ratio of this unit according to the TV. When the selected format
is not available on the disc, this setting will not affect the disc playback.
(Default: 4:3 PAN SCAN)
TV DISPLAY
4:3 PAN SCAN: Select this if you have a normal TV and want both sides of the
picture to be trimmed or formatted to fit your TV screen.
4:3 LETTER BOX: Select this if you have a normal TV. In this case, a wide picture
with black bands on the upper and lower portions of the TV screen will be displayed.
16:9: Select this if you have a wide-screen TV.
PROGRESSIVE *3
PICTURE SETTING
When connecting this unit to a progressive scan compatible TV using a component
video connection, you can enjoy high-quality DVD video with the progressive scan
mode. (Default: OFF)
ON: Enables the progressive scan.
OFF: Disables the progressive scan.
You can select the picture color setting from three predefined sets or configure in
detail. (Default: STANDARD)
STANDARD: Uses standard TV picture settings.
BRIGHT: Makes the TV picture brighter.
SOFT: Makes the TV picture softer.
PERSONAL: You can adjust Brightness, Contrast, Tint and Color (saturation)
individually. (Press
or
to select an item, press
or
to adjust the
parameter, then press ENTER to confirm the adjustment.)
PREFERENCE AUDIO
PAGE *4
SUBTITLE
DISC MENU
PARENTAL
PBC
You can enable or disable the auto-display function of the Playback Control menu for
VCDs and SVCDs. (Default: ON)
ON: Displays the Playback Control menu automatically when a disc is played back.
OFF: Starts playback of a disc without displaying the Playback Control menu.
You can enable or disable the navigator menu function when an MP3 disc or JPEG
disc includes the menu. (Default: WITH MENU)
WITHOUT MENU: Displays all the files contained in the MP3 disc or JPEG disc.
WITH MENU: Displays only the folder menu of the MP3 disc or JPEG disc.
MP3/JPEG NAV
VR LIST
You can select the original list or play list used for playback of VR (Video Recording)
format discs. (Default: ORIGINAL LIST)
ORIGINAL LIST: Select this to play the originally recorded titles on the disc.
PLAY LIST: Select this to play the edited version of the disc. (This feature is
available only when a play list has been created.)
PASSWORD CHANGE
Resets all settings to the initial parameters (except the password).
DEFAULT
RESET
*2 The video settings of your TV also affect the display image. Make sure you configure the video settings of your TV as well as this
unit’s video setup.
*3 The progressive scan mode is only available if you connect this unit to a progressive scan compatible TV using a component video
connection.
*4 “PREFERENCE PAGE” is available only when no disc is inserted or the unit is in the Stop mode (page 11).
Note
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH
THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT YOU SWITCH THE CONNECTION TO THE “STANDARD
DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR VIDEO MONITOR COMPATIBILITY WITH THIS
UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line of YAMAHA products, including the projectors DPX-1100, LPX-510 and the plasma
monitor PDM-4210/4210E.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
ADDITIONAL INFORMATION
Troubleshooting
If there is any problem with your system, check the following items. If you cannot solve your problem with the following
remedies or if your problem is not listed below, turn off and unplug the unit, then consult the nearest authorized
YAMAHA dealer or service center.
■ General
Problem
Cause
Solution
The power cable may be connected
improperly.
Make sure the power cable is plugged into the
outlet firmly.
Power turns on but immediately
shuts off
This unit may receive a strong electrical
shock such as from a lightening bolt or
excessive static electricity.
Set this unit to the Standby mode, then
disconnect the power cable. Wait for about
30 seconds, then connect the power cable
and turn on this unit.
The cables may be connected improperly.
The speakers make no sound
Make sure all cables are connected properly.
The disc loaded into this unit may be not
compatible.
Make sure you use a disc supported by this
A DTS source is played back using an analog
output jack.
Use a digital connection to play back a DTS
source.
A DTS source is played back while “PCM
ONLY” is selected for “DIGITAL
OUTPUT” in the Setup menu.
Select “ALL” for “DIGITAL OUTPUT” in
The cables may be connected improperly.
The TV shows no picture
Make sure all cables are connected properly.
This unit suddenly turns off
Turn on this unit and play the source again.
■ Remote control
Problem
Cause
Solution
The remote control does not
work for operating this unit
The remote control may be operated
outside the remote control operation
range.
For information on the remote control
operation range, refer to “Using the Remote
The remote control sensor on this unit
may be exposed to direct sunlight or
lighting (inverted fluorescent lamps).
Change the lighting or this unit’s orientation.
The batteries may be worn out.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
■ Disc playback
Problem
Cause
Solution
This unit is not turned on.
Turn on this unit and insert the disc after “NO
DISC” appears on the front panel display.
A disc cannot be inserted into
this unit
This unit is in the initialization process.
This unit is not ready for disc loading.
Wait for a while and insert the disc after “NO
DISC” appears on the front panel display.
Wait for a while and insert the disc after “NO
DISC” appears on the front panel display.
Another disc is already inserted into this
unit.
Eject the disc from this unit, and then insert the
disc you want to play back after “NO DISC”
appears on the front panel display.
You may be trying to reload the ejected disc
by pushing it.
Press
or
p, or remove the disc from the disc
loading slot fully and then insert it once again.
Some discs do not support certain functions.
Some button operations do not
work
The disc may be dirty.
Wipe the disc clean.
Playback does not start or
stops immediately when
The disc loaded into this unit may be not
compatible.
Make sure you use a disc supported by this unit.
pressing
p
When moved this unit from a cold place to
warm one, condensation may be form on the
disc reading lens.
Wait for one to two hours, then try again.
The disc may not support the multi-language
feature.
Make sure you use a disc that supports the
multi-language feature.
An audio or subtitle language
does not switch
The subtitle may be set to “OFF”.
Select a subtitle language you want to display.
No subtitles appear
The disc may not contain subtitle data.
Make sure you use a disc with subtitle data.
Cancel the A-B Repeat feature. (page 12)
When using the A-B Repeat feature
(page 12), the subtitle may not appear at the
parts other than the selected section.
The disc may not support the multi-angle
feature.
Make sure you use a disc that supports the
multi-angle feature.
A viewing angle does not
switch
You may be trying to copy a copy-protected
DVD.
Most commercially available DVDs include
copy protect features. You cannot make a copy
of these DVDs.
DVD videos cannot be copied
with the VCR
In some cases, picture may look poor while
fast forwarding or reversing, but this is not a
defect.
Picture looks poor
In the Setup menu, “TV SYSTEM” does not
match the specifications of your TV.
Carry out the procedure “Step 2: Setting the TV
The TV (monitor) does not show
the picture properly
The progressive scan mode may be used with
a TV that does not support it.
Disable the progressive scan mode. (page 23)
setting of your TV does not match the size of
your TV.
The screen size of the TV or
monitor looks strange
(the image is distorted or the
subtitle is missing)
When the progressive scan mode is activated,
image with a 4:3 aspect ratio are played on a
16:9 wide television screen.
If you cannot adjust the ratio, turn off the
progressive scan mode. (page 23)
The disc content does not match the
progressive scan mode due to the editing
method or other conditions.
Disable the progressive scan mode. (page 23)
The TV shows overlapped
picture partly
The disc loaded into this unit may be not
compatible.
Make sure you use a disc supported by this unit.
The disc is ejected without an
operation
25
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
Glossary
■ Channel (ch)
■ PCM (Pulse Code Modulation)
A signal that is changed to digital format without
compression. A CD is recorded with 16-bit sound at 44.1
kHz, while DVD recording is anywhere from 16 bits at 48
kHz to 24 bits at 192 kHz, which makes it a higher quality
sound than CD. This signal also has a type called Packed
PCM (PPCM) that can be compressed without any loss of
data.
A channel is an audio type that has been divided based on
range and other characteristics.
Ex. 5.1 channel
•
•
•
•
Front speakers, Left (1ch), Right (1ch)
Center speaker (1 ch)
Surround speakers, Left (1ch), Right (1ch)
*
Subwoofer (1 ch x 0.1 = 0.1 ch)
* In contrast to a full 1-channel band, a component designed to
enhance low frequency sound for added effect.
■ Progressive scan
A method of displaying all scanning lines in a frame at
once, reducing flicker noticeable on a larger screen and
creating a sharp and smooth image.
■ COMPONENT VIDEO OUT
Jacks for inputting or outputting a component video
signal. Component video signal consists of three lines, the
luminance signal (Y) and two color difference signals
(PB/CB, PR/CR), which enable to provide high-quality
video.
■ Sampling frequency
The number of sampling (process for digitalizing analog
signals) per second. In principle, the higher the sampling
rate, the wider the frequency range that can be played
back, and the higher the quantized bit rate, the finer the
sound that can be reproduced.
■ DTS (Digital Theater Systems)
Digital surround sound system developed by Digital
Theater Systems, Inc., which provides 5.1 channel audio.
With an abundance of audio data, it is able to provide
authentic-sounding effects.
■ Title, Chapter (DVD)
DVD video lets you divide a disc in a big way by titles or a
small way by chapters. Each division is either called a title
number or a chapter number.
■ NTSC (National Television System
Committee)
NTSC is a video signal system (525 lines, 30 frames per
second) used in North America, Central America, a
number of South American countries, and some Asian
countries, including Japan.
■ Track (CD/Video CD/Super Video CD)
A CD, VCD or SVCD can be divided into a number of
segments (tracks). Each division is called a title number.
■ PAL (Phase Alternating Line)
PAL is a video signal system (625 lines, 25 frames per
second) used in the United Kingdom, much of the rest of
western Europe, several South American countries, some
Middle East and Asian countries, several African
countries, Australia, New Zealand, and other Pacific
island countries.
■ Pan & Scan and Letterbox
In general, DVD Video is produced for viewing on a wide
television screen with an aspect ratio of 16:9. This means
you can now view most material with the intended aspect
ratio on a wide-screen television.
This ratio will not fit on a standard television that has an
aspect ratio of 4:3. Two picture styles, Pan & Scan and
Letterbox, deal with this problem.
•
Pan & Scan cuts off the left and right portions of the
picture to fill the screen.
•
Letterbox inserts black bands at the top and bottom of
the picture to reproduce an aspect ratio of 16:9.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
Copyright and Logo Marks
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
Language Codes
If your desired language for “AUDIO” “SUBTITLE” and “DISC MENU” is not listed in the Setup menu
(page 9), select “OTHER”, then enter the 4-digit language code for your desired language.
Abkhazian
Afar
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
7889
9072
9065
6785
6785
6786
7587
6779
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
7089
7168
7176
7565
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
7379
7365
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
7577
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7678
7684
7666
7775
7771
7783
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
7868
8369
7879
7866
7878
7889
7878
7967
6785
6785
7982
7977
7983
7983
8073
8065
7065
8076
8084
7967
8083
8185
8277
8279
8278
8285
8377
8371
8365
8367
7168
8382
8378
8368
8373
6785
8375
8376
8379
8384
South Ndebele
Spanish; Castilian
Sundanese
Swahili
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
Afrikaans
Albanian
Amharic
Komi
Korean
Swati
Arabic
Kuanyama; Kwanyama
Kurdish
Swedish
Tagalog
Tahitian
Tajik
Armenian
Assamese
Avestan
Kwanyama; Kuanyama
Lao
Aymara
Latin
Latvian
Tamil
Azerbaijani
Bashkir
Tatar
Letzeburgesch;
Limburgan; Limburger
Limburger; Limburgan
Lingala
Telugu
Basque
Thai
Belarusian
Bengali
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Turkish
Turkmen
Twi
Bihari
Bislama
Lithuanian
Luxembourgish
Macedonian
Malagasy
Bokmål, Norwegian
Bosnian
Breton
Bulgarian
Burmese
Castilian, Spanish
Catalan
Chamorro
Chechen
Malay
Malayalam
Maltese
Manx
Maori
Uighur
Ukrainian
Urdu
Marathi
Marshallese
Moldavian
Chewa; Chichewa; Nyanja
Chichewa; Chewa; Nyanja
Chinese
Uzbek
Mongolian
Nauru
Vietnamese
Volapük
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zhuang; Chuang
Zulu
Chuang; Zhuang
Church Slavic; Slavonic
Church Slavonic; Church
Chuvash
Navaho, Navajo
Navajo; Navaho
Ndebele, North
Ndebele, South
Ndonga
Cornish
Corsican
Nepali
Czech
North Ndebele
Northern Sami
Norwegian
Danish
Dutch
Dzongkha
English
Norwegian Bokmål; Bokmål
Norwegian Nynorsk
Nyanja; Chichewa; Chewa
Nynorsk, Norwegian
Occitan; Provençal
Old Bulgarian; Old Slavonic
Old Slavonic; Old Bulgarian
Oriya
Esperanto
Estonian
Faroese
Fijian
Finnish
French
Frisian
Oromo
Gaelic; Scottish Gaelic
Gallegan
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Georgian
German
Panjabi
Gikuyu; Kikuyu
Greek
Persian
Polish
Guarani
Portuguese
Gujarati
Provençal; Occitan (post)
Pushto
Hausa
Hebrew
Quechua
Herero
Raeto-Romance
Romanian
Hindi
Hiri Motu
Hungarian
Icelandic
Ido
Rundi
Russian
Samoan
Sango
Interlingua (International)
Inuktitut
Sanskrit
Sardinian
Inupiaq
Scottish Gaelic; Gaelic
Serbian
Irish
Italian
Shona
Japanese
Sindhi
Javanese
Sinhalese
Kalaallisut
Kannada
Slavonic; Church Slavic
Slovak
Kashmiri
Kazakh
Khmer
Slovenian
Somali
Sotho, Southem
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
Remote Control Codes
If you set the remote control code for your TV on the remote control of this unit (page 19), you can
operate the specific functions of your TV with the remote control.
Notes
• Depending on the product, this unit’s remote control may not be able to operate some TVs. In this case, use the remote control
supplied with the TV.
• If there are multiple choices of remote control codes for your TV, try them in order until you find the proper code.
TV
ADMIRAL
AIWA
AKAI
ALBA
292, 293, 216
294, 276, 283, 284
295, 296
PANASONIC 234, 235, 236, 253, 288, 211
PHILCO
PHILIPS
PIONEER
297, 225, 239, 298
225, 205, 298
226, 235, 254, 255, 268
296
AOC
297
PORTLAND 297, 256
BELL &
HOWELL
BESTAR
PROSCAN
PROSCAN
PROTON
QUASAR
293, 221
292
298
231, 241, 251
297, 250, 260, 270
234, 235
BLAUPUNKT 229, 222
BLUE SKY
BRANDT
298
223
RADIO SHACK299, 293, 297
RCA
293, 297, 234, 256, 257, 258,
BROC SONIC 297
BUSH 296
BY DESIGN 201, 202
CLATRONIC 298
221
220, 230, 271
RUNCO
SABA
SAMPO
SAMSUNG
SANYO
223, 269, 265, 266
281, 297, 280
297, 239, 248, 262, 275
295, 233, 279, 272, 273, 274,
212
CRAIG
224
CROSLEX
225, 298
CURTIS MATHIS
297, 226
SCHNEIDER 296
DAEWOO
DAYTRON
DUAL
297, 298, 224, 227, 228
239
298
SCOTT
SHARP
SIEMENS
297
292, 239, 232, 213
229
DWIN
EMERSON
293, 281
297, 224, 239, 232
SIGNATURE 216
SIGNATURE 292
FURGUSON 223, 265, 266
FIRST LINE 298
SONY
SYLVANIA
263, 214
297, 225
FISHER
FRABA
FUJITSU
FUNAI
GE
295, 233
298
289
277, 278
SYNPHONIC 217, 218, 219
TELEFUNKUN269, 264, 265, 266
THOMSON
TOSHIBA
VIDECH
WARDS
YAMAHA
ZENITH
223, 266
292, 226, 267, 215
297, 242
297, 239, 232, 216
299, 292, 242, 285, 287, 253
216, 261, 271
293, 297, 234, 235, 236
GOODMANS 296, 298, 223
GRUNDIG
HITACHI
ICE
229, 238, 249
297, 239, 242, 243, 285
296
IRRADIO
ITT/NOKIA
JC PENNY
JVC
KENDO
KTV
296
244, 245
293, 297, 234, 237
296, 246, 247, 286
298
297, 239
LG/GOLDSTAR
297, 298, 239, 237
298, 248
293, 297, 225, 226, 233, 298
LOEWE
LXI
MAGNAVOX 297, 225, 239, 298
MARANTZ
MATSUI
298, 210
295
MEDION
MEMOREX
203, 204, 298
297, 216
MITSUBISHI 299, 297, 259, 287
NAD
226, 255
NEC
NOKIA
297, 252, 282
244, 245
NOKIA OCEANIC
245
NORDMENDE 265, 266
ONWA
296
29
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
Specifications
AUDIO SECTION
GENERAL
• Audio Output Level (1 kHz, 0 dB)............................................... 2 V
• Signal to Noise Ratio ................................................105 dB or more
• Dynamic Range.........................................................100 dB or more
• Total Harmonic Distortion ..........................................0.003% or less
• Frequency Response
• Power Supply
U.K. model .......................................................... AC 230 V, 50 Hz
Australia model ................................................... AC 240 V, 50 Hz
Korea model......................................................... AC 220 V, 60 Hz
Taiwan model.......................................... AC 110–120 V, 50/60 Hz
Asia model.............................................. AC 220–240 V, 50/60 Hz
• Power consumption .....................................................................8 W
• Standby Power Consumption ....................................... less than 1 W
• Laser Pickup
Type ..................................................Semiconductor laser GaAIAs
Wave length ............................650 nm (DVD), 780 nm (VCD/CD)
Output Power............................7 mW (DVD), 10 mW (VCD/CD)
• Dimensions (W x H x D).....................................215 x 70 x 315 mm
(Approx. 8 15/32” x 2 3/4” x 12 13/32”)
DVD (fs 96 kHz).......................................................... 4 to 44 kHz
DVD (fs 48 kHz).......................................................... 4 to 22 kHz
SVCD (fs 48 kHz)........................................................ 4 to 22 kHz
SVCD (fs 44.1 kHz)..................................................... 4 to 20 kHz
CD/VCD....................................................................... 4 to 20 kHz
VIDEO SECTION
• Video Signal Level
Composite ...................................................................1 Vp-p/75 Ω
Component........................................................... 1 Vp-p/75 Ω (Y)
0.7 Vp-p/75 Ω (PB, PR)
• Weight.......................................................................................2.4 kg
(Approx. 5 lbs 5 oz)
Specifications are subject to change without notice.
SCART (U.K. model)...............................................0.7 Vp-p/75 Ω
30
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2005
All rights reserved.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in Malaysia
WF75850
Download from Www.Somanuals.com. All Manuals Search And Download.
|