GB
RX-E400
CRX-E400
CDX-E400
Receiver/CD Player
Récepteur/Lecteur CD
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
<RX-E400>
<CDX-E400>
• Minimum RMS output power per
channel 40 W + 40 W
• S-bit DAC and 8fs digital filter
• Optical digital output
• Random, repeat, and program play
• CD TEXT display
• Copy time control
• CD-RW compatible
(6Ω, 20 Hz to 20 kHz, 0.1% THD)
• Full operation system remote control
• 40-station FM/AM preset tuning
• Multi-function RDS reception
• SUBWOOFER output terminal
The receiver (RX-E400) and CD player (CDX-E400) are the main units of the YAMAHA Piano Craft Series.
You can upgrade the system by adding the cassette deck (KX-E300) and MD recorder (MDX-E300)*.
* MD recorder (MDX-E300) may not be available for some areas.
CONTENTS
<CDX-E400>
SUPPLIED ACCESSORIES....................... 2
CD PREVENTIVE CARE .......................... 2
NAMES OF BUTTONS AND CONTROLS
Front panel......................................................... 17
Display............................................................... 17
Remote control .................................................. 18
GETTING STARTED
Remote control .................................................... 3
Connecting the speakers and antennas ................ 4
Connecting the system......................................... 5
Setting the clock .................................................. 6
Adjusting the brightness of the display ............... 6
CD OPERATIONS
Playing a disc..................................................... 19
Selecting the time display and CD TEXT ......... 20
Random-sequence play...................................... 20
Repeat play ........................................................ 21
Program play ..................................................... 21
<RX-E400>
NAMES OF BUTTONS AND CONTROLS
Front panel........................................................... 7
Display................................................................. 7
Remote control .................................................... 8
SYSTEM CONTROL
Controlling other components ........................... 23
Before recording ................................................ 24
Dubbing setting ................................................. 24
Copy time control .............................................. 25
BASIC OPERATIONS
Listening to a source............................................ 9
ADDITIONAL INFORMATION
Troubleshooting................................................. 26
Specifications .................................................... 28
TUNING
Listening to the radio......................................... 10
Presetting stations .............................................. 11
RECEIVING RDS STATIONS
Receiving RDS data .......................................... 12
PTY SEEK mode............................................... 13
Optional settings for RDS functions ................. 14
USING THE BUILT-IN TIMER
Before using the timer ....................................... 15
Timer play and recording .................................. 15
Sleep timer......................................................... 16
1
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIED ACCESSORIES
After unpacking, check that the following parts are contained.
• AM loop antenna
POWER
<RX-E400>
1
2
3
• Remote control
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
–
–
FREQ/
RDS MODE PTY SEEK START
REP
RANDOM
PROG
A
B
C
TEXT/TIME
R. TIME
D
E
TAPE
• Indoor FM antenna
DIRECTION
PRESET
MD
TUNER
CD
PRESET
TAPE
AUX
MD
TAPE
REC
/
PAUSE
REC
/
PAUSE
MODE
DUBBING
START
DISPLAY
SLEEP
<CDX-E400>
VOLUME
• Audio pin cable
• Batteries (AA, R6, UM-3)
• System control cable
CD PREVENTIVE CARE
• Do not use a CD with tape, seals, or paste on it, because
damage to the unit may result.
• This compact disc player is designed for use with
following types of disc only. Never attempt to load any
other type of disc into the unit. The unit will also play
8-cm (3-inch) compact discs.
• Compact discs are not affected by small particles of
dust or fingerprints on their playing surface, but even so
they should be kept clean. Wipe by using a clean, dry
cloth. Do not wipe with a circular motion; wipe straight
outward from the center.
(Playback only)
• Be sure to use only CD-R and CD-RW discs made by
reliable manufacturers.
• Some discs cannot be played depending on the disc
characteristics or recording conditions (copyright-
protected in a particular way, etc.).
• Compact discs are not subjected to wear during play,
but damage to the disc surface when the disc is being
handled can adversely affect the disc’s play.
• Do not try to clean the disc’s surface by using any type
of disc cleaner, record spray, antistatic spray or liquid,
or any other chemical-based liquid, because such
substances might irreparably damage the disc’s surface.
• Do not use cleaning discs or warped discs. All of these
could damage the unit.
• Do not expose discs to direct sunlight, high temperature
or high humidity for a long period of time, because
these might warp or otherwise damage the disc.
To prevent a malfunction of this unit
• Do not use any non standard shaped CD (heart, etc.)
available on the market, because it may damage the
unit.
No!
2
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Remote control operation range
Remote control
VOLUME
NATURAL SOUND STEREO RECEIVER RX–E400
This remote control controls a whole system: not only
RX-E400 but also CDX-E400. Moreover, a cassette deck
(KX-E300) and MD recorder (MDX-E300) that level up
your system can be operated by it. Operating buttons for
each unit are explained on the pages below:
STANDBY/ON
DISPLAY
MEMORY
TIMER ADJ
AUTO/MAN'L
TIMER
PRESET/BAND
PRESET/TUNING
TIMER
MIN
MAX
HOUR
MIN
INPUT
BASS
TREBLE
BALANCE
PHONES
–
+
–
+
L
R
Receiver, RX-E400:
p.8
CD player, CDX-E400:
Cassette deck, KX-E300:
MD recorder, MDX-E300:
p.18
p.23
p.23
Remote control
sensor
Battery installation
Within approximately
6 m (20 feet)
1
3
2
1
2
3
Remove the battery compartment cover.
Notes
•
There should be no large obstacles between the remote control
Insert batteries into the battery compartment.
Replace the battery compartment cover.
and the main unit.
•
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp, etc.),
it might cause the remote control not to work correctly. In this
case, reposition the main unit to avoid direct lighting.
Battery replacement
If you find that the remote control must be used closer to
the main unit than usual, the batteries are weak. Replace
batteries with new ones.
Removing the protection sheet
The remote control is shipped with a protection sheet to
prevent the surface from being scratched during
transportation.
When removing the sheet, first put adhesive tape on an
edge of the remote control so that the tape sticks to the
sheet. Then peel the sheet off with the tape.
Notes
•
•
Use only AA, R6, UM-3 batteries for replacement.
Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
•
•
Remove the batteries if the remote control will not be used for
an extended period of time.
If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
Note
•
Do not scratch the remote control surface when peeling the
sheet off.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Connecting the speakers and antennas
Never plug the AC power cord to the wall outlet until all connections are
completed.
Follow the steps as shown below to connect the system using the supplied cords and accessories. Be sure all connections are
made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”.
Right speaker
Left speaker
FM antenna2
AM loop antenna
3
C
IN
MD
OUT
FM ANT
D
A
75Ω UNBAL.
R
L
IN
GND
TAPE
OUT
AM
ANT
+
–
B
IN
CD
E
SUBWOOFER
OUT
SYSTEM
CONNECTOR
IN
6Ω MIN./SPEAKER
AUX
SPEAKERS
R
L
4
To wall outlet
1
3
4
Connect the FM Antenna.
1
2
Connect the Speakers.
1 Unscrew the knob.
2 Remove approx. 10 mm (4”) of insulation from
each of the speaker wires and insert the bare wire
into the terminal.
FM ANT
UNBAL
75
Ω
3 Tighten the knob to secure the wire.
Red: positive(+)
Black: negative(–)
2
Connect the AC power cord to a wall outlet.
1
3
Notes
•
Use external FM/AM antennas if you need better reception.
Consult your dealer.
•
The AM loop antenna should be placed apart from the main
unit. The antenna may be hung on a wall.
Connect the AM Antenna.
Set up the AM loop antenna, then connect it.
To connect the subwoofer (optional)
You can reinforce the bass frequencies by adding a
subwoofer (optional).
Connect the SUBWOOFER OUT terminal of the unit to
the INPUT terminal of the subwoofer.
GND
AM
ANT
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Connecting the system
Connecting RX-E400 and CDX-E400
1
2
3
Connect ‰ to ‰ using the Audio pin cable.
Insert the plugs into the jacks of the same color.
Connect RX-E400 and CDX-E400 with the system control cable.
The other SYSTEM CONNECTOR of CDX-E400 is for connecting MDX-E300 or KX-E300.
Connect the AC power plug of CDX-E400 to AC OUTLET of RX-E400.
This connection allows you to control the power of the system through one-touch operation. It also reduces the standby
power consumption of CDX-E400.
C
IN
To wall outlet
MD
OUT
FM ANT
D
A
75Ω UNBAL.
R
L
IN
GND
TAPE
OUT
<RX-E400>
AM
ANT
+
–
B
IN
CD
E
SUBWOOFER
OUT
SYSTEM
CONNECTOR
IN
6Ω MIN./SPEAKER
AUX
SPEAKERS
R
L
System control cable
2
Audio pin cable
1
To RX-E400
3
SYSTEM
ANALOG
OUT
DIGITAL
OPTICAL
CONNECTOR
E
<CDX-E400>
L
OUT
R
Adding KX-E300 and MDX-E300 to the above system
(For details, refer to the owner's manual supplied with the respective component.)
1 Connect Å and ı of RX-E400 to Å and ı of KX-E300.
2 Connect Ç and Î of RX-E400 to Ç and Î of MDX-E300.
3 Connect an external component to the AUX terminal of RX-E400.
4 Connect DIGITAL OPTICAL OUT of CDX-E400 to DIGITAL OPTICAL IN of MDX-E300.
Take off the covers of the optical fiber cable plug, the DIGITAL OPTICAL OUT jack, and the DIGITAL OPTICAL
IN jack before making digital connections. Be sure to replace the terminal’s cover when the terminal on the rear panel
is not being used, in order to protect from dust.
Caution
•
•
Never turn RX-E400 on until all connections between components have been completed.
Never connect or disconnect the system control cable and/or power cord while the system components are turned on.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Setting the clock
You must set the clock before you use the timer functions.
The clock is based on a 24-hour system.
Adjusting the brightness
of the display
You can adjust the brightness of the display. If you have
connected the CD player (CDX-E400), cassette deck
(KX-E300), and/or MD recorder (MDX-E300) to this
unit, the brightness of the displays is automatically
adjusted to that of this unit.
STANDBY/ON DISPLAY
HOUR MIN
VOLUME
NATURAL SOUND STEREO RECEIVER RX–E400
STANDBY/ON
DISPLAY
DISPLAY
MEMORY
TIMER ADJ
AUTO/MAN'L
TIMER
PRESET/BAND
PRESET/TUNING
TIMER
MIN
MAX
HOUR
MIN
INPUT
BASS
TREBLE
BALANCE
VOLUME
PHONES
NATURAL SOUND STEREO RECEIVER RX–E400
STANDBY/ON
–
+
–
+
L
R
DISPLAY
MEMORY
TIMER ADJ
AUTO/MAN'L
TIMER
PRESET/BAND
PRESET/TUNING
TIMER
MIN
MAX
HOUR
MIN
INPUT
BASS
TREBLE
BALANCE
PHONES
TIME ADJ PRESET/BAND
–
+
–
+
L
R
1
2
3
Turn on the power by pressing STANDBY/ON on
the front panel, or POWER on the remote control.
While the power is on, press DISPLAY to display
the time.
INPUT
Press and hold DISPLAY for about two seconds so that
“Dimmer 0” appears on the display. While holding
DISPLAY, turn INPUT clockwise to increase or
counterclockwise to decrease brightness.
While holding TIME ADJ, press HOUR to set the
hour.
•
If you want to move the time in the reverse
direction, press HOUR while holding TIME ADJ
and PRESET/BAND.
4
While holding TIME ADJ, press MIN to set the
minutes.
Control Range: 0 to –6 (Preset value: 0)
•
If you want to move the time in the reverse
direction, press MIN while holding TIME ADJ
and PRESET/BAND.
To display the clock
Press DISPLAY.
The current time appears for about 8 seconds, then the
normal display returns. Some buttons and controls may
not work while the current time is displayed.
Note
•
In the event of a power failure or when the AC power cord is
disconnected for more than five minutes, you must reset the
clock.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-E400 NAMES OF BUTTONS AND CONTROLS
Front panel
1 2
3 4 5 6 7 8
9
VOLUME
NATURAL SOUND STEREO RECEIVER RX–E400
STANDBY/ON
DISPLAY
MEMORY
TIMER ADJ
AUTO/MAN'L
TIMER
PRESET/BAND
PRESET/TUNING
TIMER
MIN
MAX
HOUR
MIN
INPUT
BASS
TREBLE
BALANCE
PHONES
L
R
–
+
–
+
0 q
w
e
r
t
1STANDBY/ON (P.9)
9VOLUME (P.9)
0PHONES (P.9)
2TIMER indicator (P.15)
3DISPLAY (P.15)
qRemote control sensor (P.3)
wBASS (P.9)
4TIME ADJ/MEMORY (P.6/P.11)
5AUTO/MAN’L/TIMER (P.10/P.15)
6PRESET/BAND (P.10)
7Display (P.7)
eTREBLE (P.9)
rBALANCE (P.9)
tINPUT (P.9)
8PRESET/TUNING
HOUR/MIN (P.6/P.15)
/
(P.10)
Display
PRESET
EDIT
STEREO AUTO RDS PS PTY RT CT
TUNED PTY HOLD
TIMER
SLEEP
MEMORY
1 23 456 7 89 0 q w
1Multi-information display
7MEMORY indicator (P.11)
8RDS indicator (P.12)
2EDIT indicator
3PRESET indicator (P.11)
4STEREO indicator (P.10)
5TUNED indicator (P.10)
6AUTO indicator (P.10)
9RDS mode indicators (P.12)
0PTY HOLD indicator (P.13)
qTIMER indicator (P.15)
wSLEEP indicator (P.16)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-E400 NAMES OF BUTTONS AND CONTROLS
Remote control
1POWER (P.9)
POWER
2Preset numbers (P.11)
1
2
3FREQ/RDS (P.12)
1
2
3
4PTY SEEK MODE (P.13/P.14)
5PTY SEEK START (P.13/P.14)
6A/B/C/D/E (P.11)
1
4
2
5
3
6
4
7
5
8
6
9
7PRESET
/
(P.11)
7
0
8
+10
+100
4
5
8TUNER (RX-E400) (P.11)
9MD (MDX-E300) (P.23)
0TAPE (KX-E300) (P.23)
qCD (CDX-E400) (P.19)
3
6
–
–
FREQ/
RDS MODE PTY SEEK START
REP
RANDOM
PROG
A
B
C
R. TIME
TEXT/
TIME
D
E
wAUX (The equipment connected to the AUX
terminal) (P.5)
eSLEEP (P.16)
TAPE
DIRECTION
rDISPLAY (P.15)
tVOLUME %/fi (P.9)
8
PRESET
TUNER
CD
PRESET
7
9
MD
TAPE
Note
0
q
w
• 8~w are operation buttons and input selectors for each
component.
AUX
MD
TAPE
REC
/
PAUSE
REC/
PAUSE
MODE
DUBBING
START
DISPLAY
SLEEP
e
r
t
VOLUME
8
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
1
2
Set the volume to “MIN” by turning VOLUME.
Listening to a source
Turn on the power by pressing STANDBY/ON on
the front panel, or POWER on the remote control.
STANDBY/ON
TREBLE
VOLUME
•
Piano Craft series components that have correct
system connections made to RX-E400 can be
controlled to turn to the on or standby mode by
RX-E400. However, once the connected
components are turned to the standby mode with
their respective STANDBY/ON button, they
cannot be controlled by RX-E400 STANDBY/
ON button.
VOLUME
NATURAL SOUND STEREO RECEIVER RX–E400
STANDBY/ON
DISPLAY
MEMORY
TIMER ADJ
AUTO/MAN'L
TIMER
PRESET/BAND
PRESET/TUNING
TIMER
MIN
MAX
HOUR
MIN
INPUT
BASS
TREBLE
BALANCE
PHONES
R
–
+
–
+
L
3
Select the desired input source by turning INPUT so
that the source appears on the display.
INPUT
PHONES
BASS
BALANCE
•
When you operate the component connected to the
AUX terminal, turn INPUT to select AUX.
4
5
Play the source. (Refer to the owner’s manual
supplied with each selected component.)
POWER
POWER
1
2
3
Adjust the volume level by turning VOLUME on the
front panel or pressing VOLUME %/fi on the remote
control.
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
6
If desired, adjust BASS, TREBLE, and BALANCE.
+100
–
–
FREQ/RDS MODE PTY SEEK START
REP
RANDOM
PROG
BASS: Turn this control clockwise to increase (or
counterclockwise to decrease) the low frequency
response.
A
B
C
R. TIME
TEXT/TIME
D
E
TREBLE: Turn this control clockwise to increase (or
counterclockwise to decrease) the high frequency
response.
TAPE
DIRECTION
PRESET
TUNER
CD
PRESET
BALANCE: Adjust the balance of the output volume
from the left and right speakers to compensate for
sound imbalance caused by the speaker location or
listening room conditions.
MD
TAPE
AUX
MD
TAPE
REC
/
PAUSE
REC/PAUSE
MODE
DUBBING
START
DISPLAY
When you use headphones
SLEEP
Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the main speakers
through the headphones.
VOLUME %/fi
VOLUME
When you have finished using this
unit
Press STANDBY/ON on the front panel again or
POWER on the remote control to set this unit to the
standby mode.
Auto standby function
This unit will be put automatically into the standby mode
under the following conditions:
• A component connected with a system control cable is
selected as an input source.
• The component connected to this unit is in stop mode
and not operated for 30 minutes.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNING
Manual tuning
Listening to the radio
1
2
3
Follow steps 1 and 2 described in “Automatic
tuning.”
You can find radio stations automatically and manually.
AUTO/MAN’L PRESET/TUNING
/
Press AUTO/MAN’L so that “AUTO” disappears
from the display.
VOLUME
NATURAL SOUND STEREO RECEIVER RX–E400
STANDBY/ON
Press PRESET/TUNING
frequency) or (For a lower frequency) to select
your desired station.
(For a higher
DISPLAY
MEMORY
TIMER ADJ
AUTO/MAN'L
TIMER
PRESET/BAND
PRESET/TUNING
TIMER
MIN
MAX
HOUR
MIN
•
Each time you press PRESET/TUNING or
,
INPUT
BASS
TREBLE
BALANCE
PHONES
the frequency changes step by step.
–
+
–
+
L
R
PRESET/BAND
INPUT
Automatic tuning
1
2
Select TUNER by turning INPUT so that the
frequency of a radio station appears in the display.
Press PRESET/BAND to select the reception band.
Do not select the preset tuning mode (in which
“PRESET” appears on the display).
3
4
5
Press AUTO/MAN’L so that “AUTO” appears in the
display.
Press PRESET/TUNING
(For a higher
frequency) or (For a lower frequency).
The unit starts searching for a station.
STEREO AUTO
TUNED
When the unit finds a station, the unit stops searching
and “TUNED” appears on the display.
6
If the located station is not the one you want, repeat
steps 4 and 5 until a station you want is tuned.
Notes
•
If automatic tuning search does not find the desired station, try
manual tuning as described next.
•
When an FM stereo broadcast with sufficient signal strength is
received, “STEREO” appears on the display and you can listen
to stereo sound.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNING
To preset stations automatically
Presetting stations
1
2
Select TUNER as input source by turning INPUT.
The unit can preset station frequencies selected by
Automatic tuning or Manual tuning. Up to 40 stations can
be stored. With this function, you can select any desired
station by pressing the corresponding preset station
number.
Press MEMORY for about 2 seconds.
•
The unit starts presetting stations, “AUTO” and
“MEMORY” will flash on the display.
Received stations are stored to A1, A2...A8 sequentially.
After 40 stations or all FM and AM stations are stored, the
display will show the preset station A1.
PRESET/TUNING
/
VOLUME
NATURAL SOUND STEREO RECEIVER RX–E400
To recall a preset station
STANDBY/ON
Press TUNER and select the desired number by pressing
PRESET/BAND and PRESET/TUNING
/
on the
DISPLAY
MEMORY
TIMER ADJ
AUTO/MAN'L
TIMER
PRESET/BAND
PRESET/TUNING
TIMER
MIN
MAX
HOUR
MIN
INPUT
front panel or PRESET
/
, A/B/C/D/E and 1–8 on
BASS
TREBLE
BALANCE
PHONES
the remote control.
–
+
–
+
L
R
POWER
1
2
3
1
4
2
5
3
6
1–8
MEMORY PRESET/BAND
INPUT
4
7
5
8
6
9
To preset stations manually
7
0
8
+10
+100
1
Tune in a desired station.
(Refer to the previous page for the tuning procedure.)
–
–
FREQ
REP
/
RDS MODE PTY SEEK START
RANDOM
PROG
A
B
C
R. TIME
A/B/C/D/E
TEXT
/
TIME
2
3
Press MEMORY.
D
E
Within about 5 seconds, use PRESET/TUNING
/
to select a desired preset number. Continue
pressing PRESET/TUNING to select the
group of the preset stations (A, B, C, D, and E).
TAPE
DIRECTION
/
TUNER
PRESET
PRESET
TUNER
CD
PRESET
/
MD
TAPE
AUX
PRESET
STEREO
TUNED
MD
TAPE
REC
/
PAUSE
REC
/
PAUSE
MEMORY
MODE
DUBBING
START
DISPLAY
SLEEP
4
5
Press MEMORY.
•
“MEMORY”, “PRESET”, and preset number will
appear on the display.
VOLUME
The arrow will appear for a second when
it is preset.
PRESET
STEREO
TUNED MEMORY
Repeat steps 1 to 4 until all desired stations are
preset.
Notes
•
A new setting can be preset in place of a previous one.
•
The preset stations are retained for a week after you disconnect
the AC power cord or a power failure occurs.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEIVING RDS STATIONS
PS
Receiving RDS data
The name of the RDS station being received is displayed.
If the unit cannot find a station with PS data, the unit stops
•
searching and “NO PS” appears on the display.
RDS (Radio Data System) is a data transmission system
by FM stations in many countries. Stations using this
system transmit an inaudible stream of data in addition to
the normal radio signal. RDS data contains various types
of information, such as PS (Program Service), PTY
(Program Type), RT (Radio Text), and CT (Clock Time).
RDS PS
PTY
POWER
The type of the program on the RDS station now being
received is displayed. You can make this unit search for a
station which is broadcasting a program of a desired
program type. (Refer to PTY program mode in the next
section for details.)
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
FREQ/RDS
RDS
PTY
–
–
FREQ
REP
/
RDS MODE PTY SEEK START
RANDOM
PROG
A
B
C
TEXT/
TIME
R. TIME
D
E
RT
Information about the program (such as the title of the
song, name of the singer, etc.) on the RDS station being
received is displayed by a maximum of 64 alphanumeric
characters, including the umlaut symbol. If other
characters are used in the RT data, they are displayed with
an under-bar.
TAPE
DIRECTION
PRESET
TUNER
CD
PRESET
TUNER
MD
TAPE
•
If the unit cannot find a station with RT data, the unit stops
AUX
searching and “NO RT” appears on the display.
MD
TAPE
REC
/
PAUSE
REC
/
PAUSE
MODE
DUBBING
START
DISPLAY
RDS
RT
SLEEP
VOLUME
CT
Current time is displayed.
•
If the unit cannot find a station with CT data, the unit stops
searching and “NO CT” appears on the display.
RDS
CT
1
2
Tune in the FM station. (Refer to page 10, or you can
simply press TUNER on the remote control.)
Notes
•
Press FREQ/RDS to choose the mode. Each time
you press FREQ/RDS, the type changes as follows:
RDS may not work properly if the station you are tuned to is
not transmitting the RDS signal properly or if the signal
strength is weak.
•
Some FM stations do not offer RDS service. Of those that do,
not all provide the same types of services. The types provided
by the received RDS station are dimmed on the display. Check
with your local radio stations for details on RDS services in
your area.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEIVING RDS STATIONS
To locate a station
PTY SEEK mode
You can locate a desired station by selecting a program
type. The unit searches all preset stations into the type of
programs currently being broadcast from the RDS
stations.
1
2
Tune in the FM station. (Refer to page 10, or you can
simply press TUNER on the remote control.)
Press PTY SEEK MODE once so that “PTY” and a
PTY program flashes on the display.
POWER
PTY
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
3
4
/
Within about 20 seconds, press PRGESeEtTtPilnagyiSntgarCtDeds
the display.
repeatedly until the desired program type appears on
7
0
8
+10
PTY SEEK MODE
+100
PTY SEEK START
–
–
FREQ
/
RDS MODE PTY SEEK START
REP
RANDOM
PROG
Within about 20 seconds, press PTY SEEK START.
A
B
C
R. TIME
TEXT
/TIME
•
If a station broadcasting the selected program type
is found, the unit stops searching and the Program
Service name appears on the display.
D
E
“PTY HOLD” appears on the display.
TAPE
DIRECTION
PRESET
TUNER
CD
PRESET
PRESET
RDS
PTY
PTY HOLD
MD
TAPE
PRESET
/
AUX
5
Repeat step 4 until the desired station is located.
MD
TAPE
REC
/
PAUSE
REC
/
PAUSE
If there is no station broadcasting the program type
you select, “NO PTY” appears on the display, then
the Program Service name or frequency appears on
the display.
MODE
DUBBING
START
DISPLAY
SLEEP
VOLUME
List of PTY (Program Type)
NEWS
AFFAIRS
INFO
News
Current Affairs
General Information
Sports
SPORT
EDUCATE Education
DRAMA Drama
CULTURE Culture
SCIENCE Science
VARIED
POP M
ROCK M
Light Entertainment
Pops
Rock
M.O.R. M Middle of the Road
Music (Easy-listening)
LIGHT M
Light Classics
CLASSICS Serious Classics
OTHER M Other Music
13
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEIVING RDS STATIONS
•
•
If you receive an RDS station of some other
country, the built-in clock is synchronized with
the time setting of the country.
If the built-in clock is not yet set for the current
time or reset due to a power failure, etc., it will be
set for the time of the CT data automatically,
whether this setting is ON or OFF.
Optional settings for
RDS functions
The tuner has the following functions which make use of
the RDS data service. These are originally in operation
ON. However, you can turn these functions OFF, if so
desired.
2. LOCAL = CT (ON/OFF)
If the RDS station being received employs the
local time (summer time, etc.) data service, its
time is displayed in the CT mode.
POWER
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
PTY SEEK MODE
FREQ/RDS
+100
PTY SEEK START
3. A.M. = RDS (ON/OFF)
–
–
FREQ/RDS MODE PTY SEEK START
REP
RANDOM
PROG
RDS stations are searched instead of all FM
stations by the automatic preset tuning operation
when the setting is ON. (Refer to page 11.)
A
B
C
R. TIME
TEXT/TIME
D
E
TAPE
DIRECTION
PRESET
TUNER
CD
PRESET
4. RT SPEED:
0
TUNER
MD
TAPE
Changes the scrolling speed of the radio text
decreasing the value and, in turn, reducing the
speed.
AUX
MD
TAPE
REC
/
PAUSE
REC
/
PAUSE
MODE
DUBBING
START
DISPLAY
SLEEP
DISPLAY
VOLUME
Control Range: 0 to 3 (Preset value: 0)
5
6
Choose the function ON or OFF by pressing PTY
SEEK START, confirming it in the display. Press
PTY SEEK START repeatedly to change the value
for RT SPEED.
•
If there is no operation for about 20 seconds, this
mode is cancelled and turns into the frequency
display. If the station has PS data, it turns into the
PS mode.
1
2
3
4
Select the FM band by pressing TUNER.
Press DISPLAY to display the current time.
Press FREQ/RDS.
Press FREQ/RDS again to restore the frequency
display mode.
Each time you press PTY SEEK MODE the display
will change as follows:
1. CT = CLOCK (ON/OFF)
The tuner corrects the time of the built-in clock
automatically by synchronizing it with the CT
data on the RDS station being received.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE BUILT-IN TIMUSEIRNG THE BUILT-IN TIMER
3. Timer REC
Before using the timer
Select the recording component by turning
INPUT. If you like to enjoy timer play with
TUNER or AUX, select “REC Mode OFF”.
If you want to use the cassette deck, KX-E300 or the MD
Recorder, MDX-E300 for timer play or recording, you
must first make the connections as shown in “Connecting
the system” on page 5. For details, refer to the instructions
supplied with the MDX-E300 or KX-E300.
(Example)
Timer play and recording
4. ON Time
By using the built-in timer, you can have the unit turn on
at a specified time and begin playing or recording
automatically. You can also specify the turn off time.
“ON Time” appears on the display for a second,
and changed to the time setting mode.
Press HOUR to set the hour.
Press MIN to set the minute.
DISPLAY
HOUR MIN
VOLUME
NATURAL SOUND STEREO RECEIVER RX–E400
5. OFF Time
STANDBY/ON
Set the time the same way as above.
If you set the ON time but not OFF time, the timer
play or recording will finish automatically after an
hour.
DISPLAY
MEMORY
TIMER ADJ
AUTO/MAN'L
TIMER
PRESET/BAND
PRESET/TUNING
TIMER
MIN
MAX
HOUR
MIN
INPUT
BASS
TREBLE
BALANCE
PHONES
–
+
–
+
L
R
Notes
•
The display mode will change in about 8 seconds. If the
mode is changed before the setting is completed, call the
mode again by pressing DISPLAY once or more.
If you select the input other than TUNER and AUX on
“2. Timer Input”, “3. Timer REC” is skipped.
•
TIMER
INPUT
1
Press DISPLAY.
Whenever DISPLAY is pressed, the display mode
changes as follows:
2
Press TIMER to complete the timer setting.
The system is put in the standby mode.
•
TIMER indicator lights up.
1. Clock Time (TIMER on/off mode)
If you have not set the clock yet “Set Clock”
appears. You need to set the current time as
described on page 6.
If you continue using the system, press STANDBY/
ON to turn on this unit.
To cancel the timer play setting
Press DISPLAY to show the current time, then press
TIMER so that “TIMER” goes off from the display. You
can also cancel by pressing TIMER in standby mode.
2. Timer Input
Select the source to be played by turning INPUT.
• Timer recording is possible only when you
select TUNER or AUX.
Note
•
In the event of a power failure or when the AC power cord is
disconnected for more than five minutes, you must reset the
clock.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE BUILT-IN TIMER
Sleep timer
The unit can be turned off automatically at a selected
SLEEP time.
PRESET
TUNER
PRESET
MD
CD
TAPE
AUX
MD
TAPE
REC
/
PAUSE
REC
/
PAUSE
MODE
DUBBING
START
DISPLAY
SLEEP
SLEEP
VOLUME
1
2
Play the desired sound source.
Press SLEEP repeatedly until the desired sleep time
appears in the display. Each time you press SLEEP,
the sleep time changes as follows:
SLEEP 2h00m
SLEEP 1h30m
SLEEP 1h00m
SLEEP 0h30m
SLEEP OFF
About 4 seconds after setting, the normal display will
resume.
•
“SLEEP” will appear in the display.
3
The unit will turn off automatically when the selected
sleep time is reached.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CDX-E400 NAMES OF BUTTONS AND CONTROLS
Front panel
1
2
3 4 5
NATURAL SOUND COMPACT DISC PLAYER CDX–E400
STANDBY/ON
/
/
6
7
1STANDBY/ON (P.19)
2Disc tray (P.19)
5^ (Play/Pause) (P.19)
6Display (this page)
3
(Open/Close) (P.19)
7$/! (Skip/Search Backward)
⁄/› (Skip/Search Forward) (P.19)
4& (Stop) (P.19)
Display
8
7 6
5
4
REPEAT S F PROGRAM RANDOM
1
2
3
4
5
6
7
8
9
10 SPACE
A
B
TITLEARTISTTRACK CD–TEXT 11 12 13 14 15 16 17 18 19 20
9 1
2 3
1Multi-information Display
2* Pause indicator
6RANDOM indicator (P.20)
7PROGRAM indicator (P.21)
3# Play indicator
8REPEAT S/F (Single or Full) indicator (P.21)
9CD-TEXT indicator (P.20)
4A
B Tape side indicator (P.25)
5Music calendar
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CDX-E400 NAMES OF BUTTONS AND CONTROLS
Remote control
1Numeric buttons (P.19)
POWER
• +100 button is used when operating
MDX-E300.
1
2
3
2REP (Repeat) (P.21)
1
4
2
5
3
6
3RANDOM (Random) (P.20)
4PROG (Program) (P.21)
5TEXT/TIME (P.20)
1
4
7
5
8
6
9
7
0
8
+10
+100
6^ (Play/Pause) (P.19)
7& (Stop) (P.19)
–
–
FREQ
/
RDS MODE PTY SEEK START
REP
RANDOM
PROG
2
3
4
8$ ! (Skip/Seach Backward) (P.19)
9⁄ › (Skip/Seach Forward) (P.19)
0CD input (P.19)
A
B
C
R. TIME
TEXT
/
TIME
D
E
5
6
9
7
8
TAPE
DIRECTION
PRESET
TUNER
CD
PRESET
MD
TAPE
0
AUX
MD
TAPE
REC
/
PAUSE
REC
/
PAUSE
MODE
DUBBING
START
DISPLAY
SLEEP
VOLUME
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OPERATIONS
3
Press to open the disc tray, and place a CD on the
tray.
Playing a disc
&
^
0
0
4
-E
X
D
C
R
E
Y
A
L
P
C
IS
D
T
C
A
P
M
O
C
D
N
U
O
S
L
A
R
U
T
A
N
NATURAL SOUND COMPACT DISC PLAYER CDX–E400
N
/O
ANDBY
ST
STANDBY/ON
/
/
4
Press ^ to start play.
This unit starts play.
To pause play
Press ^.
⁄/›
$/!
To resume play, press ^ again.
POWER
To stop play
Press &.
1
2
3
1
4
2
5
3
6
To eject the CD
Numeric
buttons
Press to open the disc tray, and remove the CD from
the tray.
4
7
5
8
6
9
7
0
8
+10
+100
–
–
FREQ
REP
/
RDS MODE PTY SEEK START
To play a specific track on the disc
(Skip)
RANDOM
PROG
A
B
C
R. TIME
TEXT
/
TIME
D
E
Direct play
^
Select a desired track using the numeric button.
(Example: To select 35, press +10 three times so that
“3 –” appears in the display, then press 5.)
&
TAPE
$ !/⁄ ›
DIRECTION
PRESET
TUNER
CD
PRESET
Skip play
Press ⁄/› to skip forward or $/! to skip
MD
TAPE
backward. Press once for each track to be skipped.
CD
AUX
Notes
MD
TAPE
REC
/
PAUSE
REC
/
PAUSE
•
•
•
You cannot enter a number that is higher than the last track
number on the disc.
MODE
DUBBING
START
DISPLAY
These operations can also be performed when the unit is in the
pause or stop mode.
During stop mode, if ⁄/› or $/! is pressed, the
track number successively changes to higher numbers (or
lower numbers).
SLEEP
VOLUME
To advance or reverse playback
rapidly (Search)
Press and hold ⁄/› to advance playback rapidly, and
$/! to reverse playback rapidly.
1
2
Turn on the power of RX-E400 and CDX-E400.
(Refer to page 9.)
Note
•
This unit cannot play a CD-R or CD-RW disc unless the disc is
finalized. Please make sure to finalize the disc on the CD
recorder before playing on this unit.
Press CD on the remote control in order to operate
the CD player by the remote control.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OPERATIONS
Selecting the time
display and CD TEXT
Random-sequence play
The unit can play all the tracks in a random sequence.
POWER
You can select any of four time displays by pressing
TEXT/TIME. When you play a CD with CD TEXT, the
disc title, artist name, and track name are also displayed.
1
2
3
1
4
2
5
3
6
POWER
4
7
5
8
6
9
1
2
3
7
0
8
+10
+100
1
4
2
5
3
6
–
–
FREQ
/
RDS MODE PTY SEEK START
REP
RANDOM
PROG
4
7
5
8
6
9
A
B
C
R. TIME
RANDOM
TEXT
/
TIME
7
0
8
+10
+100
D
E
–
–
FREQ/
RDS MODE PTY SEEK START
REP
RANDOM
PROG
A
B
C
TEXT/TIME
R. TIME
Press RANDOM.
“RANDOM” appears on the display.
D
E
TEXT/TIME
•
The unit starts random sequence play.
Each time you press TEXT/TIME, the display changes as
follows:
To cancel random-sequence play
mode
Elapsed time of the
current track
Press & or RANDOM.
• “RANDOM” disappears from the display.
Remaining time of the
current track
Notes
•
This feature will not function during programming, or during
programmed play.
•
If ⁄/› is pressed during random-sequence play, the next
randomly programmed track will be played.
If $/! is pressed, play will return to the beginning of the
current track.
Total disc play time
Total remaining time of
the disc
•
Total remaining time on the disc will not be displayed during
random-sequence play.
•
“CD-TEXT” appears on the display if
a CD has CD TEXT.
Disc title
Artist name
Track name
Note
•
The disc title, artist names, or track names may not be
displayed with some CD TEXT discs. In this case, “(NO
ENTRY)” appears on the display for about two seconds and
then go back to the time display.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OPERATIONS
Repeat play
Program play
You can play any desired track or disc repeatedly.
Press REP to select the repeat mode.
By creating a program, you can enjoy listening to your
favourite tracks in any desired order. As many as 30
tracks can be programmed in sequence.
POWER
POWER
1
2
3
1
4
2
5
3
6
1
2
3
1
4
2
5
3
6
4
7
5
8
6
9
Numeric
buttons
4
7
5
8
6
9
7
0
8
+10
+100
7
0
8
+10
–
–
FREQ
REP
/
RDS MODE PTY SEEK START
+100
RANDOM
PROG
–
–
FREQ
REP
/
RDS MODE PTY SEEK START
A
B
C
R. TIME
RANDOM
PROG
REP
TEXT
/
TIME
PROG
A
B
C
R. TIME
D
E
TEXT
/TIME
D
E
^
&
SINGLE REPEAT
The current track is played repeatedly.
TAPE
$ !/⁄ ›
DIRECTION
PRESET
TUNER
CD
PRESET
REPEAT S
MD
TAPE
AUX
FULL REPEAT
MD
TAPE
REC
/
PAUSE
REC
/
PAUSE
The current disc is played repeatedly.
• In random-sequence play mode, all randomly
sequenced tracks are played repeatedly in the same
order.
MODE
DUBBING
START
DISPLAY
SLEEP
VOLUME
REPEAT
F
To cancel repeat play mode
Press REP successively until “REPEAT S” and
“REPEAT F” disappear from the display.
1
2
Press & to stop the unit.
Press PROG.
•
“PROGRAM” appears in the display.
PROGRAM
3
Use the numeric buttons to select a track number
until the desired track number appears on the display.
PROGRAM
4
5
Repeat step 3 to program more tracks. You can select
the same track again.
Press ^ to start program play.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OPERATIONS
To stop program play mode
Press &.
Note
•
⁄/› or $/! can be used during program play to skip
to tracks within the program.
To check program data
1. Press & to stop program play.
2. Press PROG. Then each time you press ⁄/› /
$/!, the track number and the program number
are displayed in the order of the program.
To change program data
1. Follow the preceding procedure described in “To
check program data.”
2. Display the track number to be changed by pressing
⁄/› / $/!.
3. Press the numeric button of the desired track. The
previously programmed track will be cleared from
memory and the new one will be programmed.
To delete all program data
When program play is stopped, press &.
Note
•
Turning the unit to the standby mode or opening the disc tray
also deletes the program data.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONTROL
Controlling other components
MDX-E300
POWER
1Numeric buttons
2REP (Repeat)
1
2
3
3RANDOM
1
4
2
5
3
6
4TEXT/TIME
1
4
7
5
8
6
9
5PROG (Program)
6^ (Play/Pause)
7⁄ › (Skip/Search Forward)
8$ ! (Skip/Search Backward)
9& (Stop)
7
0
8
+10
+100
–
–
FREQ
/
RDS MODE PTY SEEK START
REP
RANDOM
PROG
2
3
5
A
B
C
R. TIME
TEXT
/
TIME
0MD input
D
E
4
qMD REC/PAUSE
6,1
7,2
8,3
9,4
TAPE
DIRECTION
KX-E300
1 ^ (Play)
PRESET
TUNER
CD
PRESET
2 ⁄ › (Fast-foward)
3 $ ! (Rewind)
4 & (Stop)
MD
TAPE
0
q
5
6
AUX
MD
TAPE
5 TAPE input
REC
/
PAUSE
REC
/
PAUSE
6 TAPE REC/PAUSE
MODE
DUBBING
START
DISPLAY
SLEEP
VOLUME
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONTROL
2
3
Before recording
When you record by using MDX-E300 or KX-E300, you
must first make the connections as shown in “Connecting
the system” on page 5. For details, refer to the instructions
supplied with the MDX-E300 or KX-E300. A source from
the component which is connected to the AUX terminal
component can be recorded on a tape or MD.
Play unit Record unit
Dubbing setting
There are six different combinations of components. Once
you choose a certain mode, recording starts and ends
automatically in a certain way for each mode.
•
Same as CD = TAPE
TAPE
Play unit
Record unit
DIRECTION
4
PRESET
TUNER
CD
PRESET
MD
TAPE
AUX
MD
TAPE
REC
/
PAUSE
REC
/
PAUSE
•
Recording automatically starts at the beginning of
the tape. (By pressing DUBBING START, the
tape automatically rewinds to the beginning if it is
in the middle.)
MODE
DUBBING
START
DISPLAY
DUBBING
START
DUBBING
MODE
SLEEP
VOLUME
2
Press DUBBING START to start recording.
Note
1
Decide the combination of the components. Each
time you press DUBBING MODE, the mode will
change in the below order.
•
The displays 1~4 which include the component you have
not connected to your receiver (RX-E400) will be skipped.
To stop dubbing
1
Press &.
•
Recording automatically starts from the beginning
of the tape. (By pressing DUBBING START, the
tape automatically rewinds to the beginning if it is
in the middle.)
•
•
When the recording on side A finishes while a
track is being played back, the recording on side B
starts from the beginning of the same track.
The sound is automatically faded out when it gets
close to the end of side B.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONTROL
4
5
Select the desired track number using numeric
buttons.
Copy time control
•
•
Repeat step 4 to continue programming tracks.
The remaining time is shown on the display. If the
track is longer than the remaining time, “Error”
appears on the display.
By specifying the length of the tape, CDX-E400 programs
tracks or helps you to program tracks so they will fit onto
the tape with the least amount of unrecorded space
remaining at each end of the tape. There are three ways of
programming.
Press R.TIME to continue programming tracks on
side B.
1 Manual tape programming
•
Repeat step 4.
POWER
6
7
Press PROG to confirm the program.
1
2
3
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
1
4
2
5
3
6
4
7
5
8
6
9
7
0
8
+10
+100
2 Automatic tape programming
–
–
FREQ
/
RDS MODE PTY SEEK START
REP
RANDOM
PROG
REP
RANDOM
PROG
A
B
C
R. TIME
1
2
Repeat steps 1 and 2 of “Manual tape programming”.
TEXT
/TIME
R.TIME
D
E
Press REP to start programming.
•
Programming is done in the order on the CD from
side A to side B. When complete, the programmed
track number and total time are indicated in the
display for 3 seconds.
TAPE
DIRECTION
PRESET
TUNER
CD
PRESET
MD
TAPE
3
4
Press PROG to confirm the program.
AUX
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
MD
TAPE
REC
/
PAUSE
REC
/PAUSE
MODE
DUBBING
START
DISPLAY
DUBBING
MODE
DUBBING
START
SLEEP
3 Random tape programming
VOLUME
1
2
Repeat steps 1 and 2 of “Manual tape programming”.
Press RANDOM to start programming.
•
Programming of CD tracks is done randomly from
side A to side B. When complete, the programmed
track number and total time are indicated in the
display for 3 seconds.
1
2
Insert the desired disc into the CD player, and load a
blank tape into the KX-E300.
3
4
Press PROG to confirm the program.
Press R.TIME repeatedly to select the length of tape
to be used. Each time you press R.TIME, the length
of the tape changes as follows:
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
46
54
90
60
To stop dubbing
•
You can use numeric buttons to input the length of
the tape.
Press & on CDX-E400 or & on KX-E300.
To cancel tape programming
3
Press PROG to start programming.
“A B” appears in the display to indicate the
direction of the tape.
•
Press & on CDX-E400 when dubbing is stopped.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
Troubleshooting
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the
simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the
power cord and contact your authorized YAMAHA dealer or service center for help. When taking the service, the
MDX-E300 or KX-E300 may be needed. For details, contact your authorized YAMAHA dealer or service center.
SYMPTOM
CAUSE
REMEDY
The unit does not switch ON when
the STANDBY/ON switch is pressed.
The AC power cord is not connected or not
completely connected.
Securely connect the power cord.
No sound from one speaker.
The sound suddenly goes off.
Loose speaker connections.
Connect properly.
The protection circuit has been activated
because of a short circuit, etc.
Check the speaker wires are not touching each other
and then turn the unit back on.
No sound from an external unit
connected with this unit or play does
not begin.
Incorrect cord connections.
Connect the cords properly. If the problem persists,
the cords may be defective.
Input source selection is not proper.
Make a proper input source selection.
Sound distorted.
The component connected to this unit is
disconnected from AC outlet.
Connect the AC power cord of the component to an
AC outlet.
Excessive static in FM broadcasts.
Interference from starting motor of a nearby
car.
Position the FM antenna as high and as far away
from nearby roads as possible. Connect using a
coaxial cable.
Interference from the thermostat of a nearby
electrical appliance.
Noise increases during stereo
broadcasts.
Antenna input is too weak due to obstructions
or excessive distance from the broadcasting
station.
Check the antenna connection.
Install a multi-element type FM antenna if possible.
Stereo broadcasts are noisy and
STEREO indicator blinks on and off.
Insufficient antenna input.
Install an antenna appropriate for the electric field
strength of your area.
Cannot select preset stations.
Preset memory has been erased.
Reprogram memory presets.
Buzzing or static during AM
broadcasts.
Interference from sources such as lightning,
fluorescent lights, electric motors or thermostat lessened by grounding AM loop antenna.
of nearby electrical appliance.
The problem is difficult to eliminate, but can be
TV or microprocessor is being used nearby.
Move away from TV or microprocessor.
Properly connect the AM loop antenna.
Change orientation of the AM loop antenna.
Install an external AM loop antenna.
Set current time.
AM broadcast sensitivity is poor.
Radio signal is weak or the antenna is not
properly connected.
Cannot set timer.
Current time is not set.
The unit does not work normally.
The internal microcomputer has been frozen
by an external electric shock (lightning,
excessive static electricity, etc.) or the power
supply with low voltage.
Unplug the AC power cord from the wall outlet, and
then plug in again after about one minute.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
SYMPTOM
CAUSE
REMEDY
Play does not begin.
The disc is damaged.
Check the disc carefully; replace it if necessary.
There is moisture on the laser pick-up.
Wait 20 to 30 minutes after switching the unit ON
before trying to play a disc.
The disc has been loaded upside down.
The disc is dirty.
Reload the disc with the label side facing up.
Clean the disc.
Play is delayed, or begins at the
wrong place.
The disc may be scratched or damaged.
Check the disc carefully; replace it if necessary.
CD synchronized recording or
Automatic recording function does
not work.
The system cable is not connected securely.
Connect the system cable properly.
Sound “skips.”
The unit is being subjected to vibrations or
impacts.
Relocate the unit.
Clean the disc.
The disc is dirty.
Sound “hums.”
Improper cable connections.
Securely connect the audio cables. If the problem
persists, the cables may be defective.
Noise from inside of the unit.
The disc may be warped.
Replace the disc.
The remote control does not work.
The batteries of the remote control are too
weak.
Replace the batteries with new ones.
Remote control is too far away or is being
used at an incorrect angle.
Use within 6 meters and 60 degree radius.
Direct sunlight or lighting (of an inverter type
of fluorescent lamp, etc.) is striking the
remote control sensor of the unit.
Change the position of the unit.
TV functions strangely when the
remote control is being used.
Remote control is being used near TV set
with a remote control sensor.
Relocate this unit away from the TV or cover the
TV’s remote control sensor.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
Specifications
<RX-E400>
<CDX-E400>
Amplifier section
CD player section
Minimum RMS output power per channel
D/A converter ...................................................................... S-bit DAC
Frequency response ...................................... 2 Hz to 20 kHz, 0.5 dB
S/N ratio ................................................................................... 102 dB
................................................ 55 W + 55 W (6Ω 1kHz 0.1% THD)
.............................. 40 W + 40 W (6Ω 20 Hz to 20 kHz 0.1% THD)
DIN Standard output power per channel (Europe model)
................................................ 60 W + 60 W (4Ω 1kHz 0.7% THD)
Input sensitivity/Impedance
Laser diode properties
• Material: GaAIAs
• Wavelength: 780 nm
CD/TAPE/MD/AUX ................................................. 150 mV/47 kΩ
Frequency response
CD etc. ..................................................... 20 Hz to 20 kHz, 0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
• Emission duration: continuous
• Laser output: max. 44.6 µW*
CD etc. 20 W, 6 Ω ...................................................................0.04%
Signal-to-Noise ratio (IHF-A Network)
CD etc. (250 mV, Input shorted) ............................................. 98 dB
Output level/Impedance
* This output is the value measured at a distance of about 200 mm
from the objective lens surface on the Optical Pick-up Block.
PHONES ..................................................................... 0.43 V/330 Ω
General
Power supply
Tuner section
[U.K. and Europe models] ..................................... AC 230 V, 50 Hz
[General model] .......................... AC 110/120/220/240 V, 50/60 Hz
Power consumption ..................................................................... 10 W
Power consumption (standby mode) ......................................... 4.0 W
Dimensions (W x H x D) ..................................... 217 x 108 x 346 mm
Weight ........................................................................................ 3.0 kg
Tuning range
FM
[U.S.A. and Canada models] ................................ 87.5 – 107.9 MHz
[U.K., Europe, Australia and General models]
.......................................................................... 87.50 – 108.00 MHz
AM
[U.S.A. and Canada models] ................................... 530 – 1710 kHz
[U.K., Europe and Australia models] ...................... 531 – 1611 kHz
[General model] ....................................... 530/531 – 1710/1611 kHz
Sensitivity
Specifications are subject to change without notice.
FM (S/N 30dB) ....................................................................... 1.0 µV
AM .................................................................................... 300 µV/m
General
Power supply
[U.S.A. and Canada models] ................................. AC 120 V, 60 Hz
[Australia model] ................................................... AC 240 V, 50 Hz
[U.K. and Europe models] ..................................... AC 230 V, 50 Hz
[General model] .......................... AC 110/120/220/240 V, 50/60 Hz
Power consumption
[U.S.A. and Canada models] .................................................. 110 W
[U.K., Europe, Australia and General models] ...................... 125 W
Power consumption (standby mode)
[U.S.A. and Canada models] ................................................... 0.7 W
[U.K., Europe and Australia models] ...................................... 0.8 W
Dimensions (W x H x D) .................................. 217 x 108 x 372 mm
Weight ..................................................................................... 5.4 kg
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CDX-E400
ATTENTION
L’emploi de commandes, de réglages ou un choix
de procédures différents des spécifications de cette
brochure peut entraîner une exposition à
d’éventuelles radiations pouvant être dangereses.
On the rear panel
ACHTUNG
Die Verwendung von Bedienungselementen oder
Einstellungen oder die Durchführung von
Bedienungsvorgängen, die nicht in dieser Anleitung
aufgeführt sind, kann zu einem Kontakt mit
gefährlichen Laserstrahlen führen.
OBSERVERA
Användning av kontroller och justeringar eller
genomförande av procedurer andra än de som
specificeras i denna bok kan resultera i att du
utsätter dig för farlig strålning.
ATTENZIONE
Uso di controlli o regolazioni o procedure non
specificamente descritte può causare l’esposizione
a radiazioni di livello pericoloso.
PRECAUCIÓN
El uso de los controles o los procedimientos de
ajuste o utilización diferentes de los especificados
en este manual pueden causar una exposición
peligrosa a la radiación.
VOORZICHTIG
Gebruik van bedieningsorganen of instellingen, of
uitvoeren van handelingen anders dan staan
beschreven in deze handleiding kunnen leiden tot
blootstelling aan gevaarlijke stralen.
VARO!
AVATTAESSA JA SUOJALUKITUS
OHITETTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ
KATSO SÄTEESEEN.
VARNING!
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD.
BETRAKTA EJ STRÅLEN.
Download from Www.Somanuals.com. All Manuals Search And Download.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
V922180
|