Yamaha CD Player CDR HD1500HDD User Manual

UAB  
CDR-HD1500  
HDD/CD Recorder  
Enregistreur CD/Disque Dur  
MULTI JOG  
PUSH ENTER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
TRACK NO.  
BOOKMARK  
COMPLETE  
DIGITAL REC LEVEL  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
MIN  
MAX  
OWNER’S MANUAL  
MODE D’EMPLOI  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
1
2
3
4
5
6
7
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
CAUTION: TO REDUCE THE RISK OF  
ELECTRIC SHOCK, DO NOT REMOVE  
COVER (OR BACK). NO USER-SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
Do not block any ventilation openings. Install in accordance  
with the manufacturer’s instructions.  
8
Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
• Explanation of Graphical Symbols  
9
Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two  
blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug  
does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
The lightning flash with arrowhead symbol, within an  
equilateral triangle, is intended to alert you to the  
presence of uninsulated “dangerous voltage” within the  
product’s enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is  
intended to alert you to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
10 Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
11 Only use attachments/accessories specified by the  
manufacturer.  
12 Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer, or sold with the apparatus.  
When a cart is used, use caution when  
moving the cart/apparatus combination to  
avoid injury from tip-over.  
IMPORTANT!  
13 Unplug this apparatus during lightning  
Please record the serial number of this unit in the space below.  
storms or when unused for long periods of time.  
14 Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
Model:  
Serial No.:  
The serial number is located on the rear of the unit.  
Retain this Owner’s Manual in a safe place for future reference.  
We WantYou Listening For A Lifetime  
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your  
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or  
distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often  
undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend  
you to avoid prolonged exposure from excessive volume levels.  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPLIANCE INFORMATION STATEMENT  
(DECLARATION OF CONFORMITY PROCEDURE)  
Responsible Party:  
Address:  
Yamaha Electronics Corporation, U.S.A.  
6660 Orangethorpe Avenue  
Buena Park, CA 90620  
714-522-9105  
Telephone:  
Fax:  
714-670-0108  
Type of Equipment:  
Model Name:  
HDD/CD Recorder  
CDR-HD1500  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following conditions:  
1) this device may not cause harmful interference, and  
2) this device must accept any interference received including interference that may cause undesired operation.  
See the “TROUBLESHOOTING” section at the end of this manual if interference to radio reception is suspected.  
FCC INFORMATION (for US customers)  
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!  
Compliance with FCC regulations does not guarantee that  
interference will not occur in all installations. If this product is  
found to be the source of interference, which can be determined  
by turning the unit “OFF” and “ON”, please try to eliminate the  
problem by using one of the following measures:  
This product, when installed as indicated in the instructions  
contained in this manual, meets FCC requirements.  
Modifications not expressly approved by Yamaha may void  
your authority, granted by the FCC, to use the product.  
Relocate either this product or the device that is being affected by  
the interference.  
2. IMPORTANT: When connecting this product to  
accessories and/or another product use only high quality  
shielded cables. Cable/s supplied with this product MUST  
be used. Follow all installation instructions. Failure to  
follow instructions could void your FCC authorization to  
use this product in the USA.  
Utilize power outlets that are on different branch (circuit breaker  
or fuse) circuits or install AC line filter/s.  
In the case of radio or TV interference, relocate/ reorient the  
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the  
lead-in to coaxial type cable.  
3. NOTE: This product has been tested and found to comply  
with the requirements listed in FCC Regulations, Part 15 for  
Class “B” digital devices. Compliance with these  
requirements provides a reasonable level of assurance that  
your use of this product in a residential environment will  
not result in harmful interference with other electronic  
devices.  
If these corrective measures do not produce satisfactory results,  
please contact the local retailer authorized to distribute this type  
of product. If you can not locate the appropriate retailer, please  
contact Yamaha Electronics Corporation, U.S.A. 6660  
Orangethorpe Avenue, Buena Park, CA 90620.  
The above statements apply ONLY to those products distributed  
by Yamaha Corporation of America or its subsidiaries.  
This equipment generates/uses radio frequencies and, if not  
installed and used according to the instructions found in the  
users manual, may cause interference harmful to the  
operation of other electronic devices.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION: READ THIS BEFORE OPERATING THIS UNIT  
• To assure the finest performance, please read this manual  
carefully. Keep it in a safe place for future reference.  
WARNING  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.  
• Install this unit in a well ventilated, cool, dry, clean place – away  
from direct sunlight, heat sources, vibration, dust, moisture, and/  
or cold. Avoid ventilation space of at least 30 cm on the top, 20  
cm on the left and right, and 10 cm on the back of this unit.  
Laser component in this product is capable of emitting radiation  
exceeding the limit for Class 1.  
• Locate this unit away from other electrical appliances, motors, or  
transformers to avoid humming sounds.  
SPECIAL INSTRUCTIONS FOR U.K. MODEL  
IMPORTANT  
The wires in this mains lead are coloures in accordance with the  
following code:  
• Do not expose this unit to sudden temperature changes from cold  
to hot, and do not locate this unit in a environment with high  
humidity (i.e. a room with a humidifier) to prevent condensation  
inside this unit, which may cause an electrical shock, fire, damage  
to this unit, and/or personal injury.  
GREEN-and-YELLOW:Earth  
BLUE:Neutral  
BROWN:Live  
• Avoid installing this unit where foreign object may fall onto this  
unit and/or this unit may be exposed to liquid dripping or  
splashing. On the top of this unit, do NOT place:  
As the colours of the wires in the mains lead of this apparatus  
may not correspond with the coloured markings identifying the  
terminals in your plug proceed as follows: The wire which is  
coloured GREEN-and-YELLOW must be connected to the  
terminal in the plug which is marked by the letter E or by the  
safety earth symbol or coloured GREEN or GREEN-and -  
YELLOW. The wire which is coloured BLUE must be  
connected to the terminal which is marked with the letter N or  
coloured BLACK. The wire which is coloured BROWN must be  
connected to the terminal which is marked with the letter L or  
coloured RED.  
• Other components, as they may cause damage and/or  
discoloration on the surface of this unit.  
• Burning objects (i.e. candles), as they may cause fire, damage  
to this unit, and/or personal injury.  
• Containers with liquid in them, as they may fall and liquid  
may electrical shock to the user and/or damage to this unit.  
• Do not cover the rear panel of this unit with a newspaper,  
tablecloth, curtain, etc. in order not to obstruct heat radiation. If  
the temperature inside this unit rises, it may cause fire, damage to  
this unit, and/or personal injury.  
• Do not plug in this unit to a wall outlet until all connections are  
complete.  
For U.K. customers  
If the socket outlets in the home are not suitable for the plug  
supplied with this appliance, it should be cut off and an appropriate  
3 pin plug fitted. For details, refer to the instructions described  
above.  
• Do not operate this unit upside-down. It may overheat, possibly  
causing damage.  
• Do not use force on switches, knobs and/or cords.  
• When disconnecting the power cord from the wall outlet, grasp  
the plug; do not pull the cord.  
Note: The plug severed from the mains lead must be destroyed, as  
a plug with bared flexible cord is hazardous if engaged in a live  
socket outlet.  
• Do not clean this unit with chemical solvents; this might damage  
the finish. Use a clean, dry cloth.  
• Only voltage specified on this unit must be used. Using this unit  
with a higher voltage than specified is dangerous and may cause  
fire, damage to this unit, and/or personal injury. YAMAHA will  
not be held responsible for any damage resulting from use of this  
unit with a voltage other than specified.  
For Canadian Customers  
To prevent electric shock, match wide blade of plug to wide slot  
and fully insert.  
This Class B digital apparatus complies with Canadian ICES–  
003.  
• Do not attempt to modify or fix this unit. Contact qualified  
YAMAHA service personnel when any service is needed. The  
cabinet should never be opened for any reasons.  
• When not planning to use this unit for long periods of time (i.e.  
vacation), disconnect the AC power plug from the wall outlet.  
• Be sure to read the “TROUBLESHOOTING” section on common  
operating errors before concluding that this unit is faulty.  
• Before moving this unit, first check that there is no disc in the disc  
tray. Finally, press POWER to turn off this unit, and disconnect  
the AC power plug from the wall outlet.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD/CD-R/CD-RW COMPATIBLE WITH THIS UNIT  
Discs that can be used for recording on  
Discs that can be played back  
In addition to CD-R and CD-RW digital audio discs described  
previously, commercially available CDs bearing the marks shown  
below can also be played on this unit. If you use the CDs that do  
not meet CD standards, this unit may operate properly.  
this unit  
Be sure to use only CD-R and CD-RW discs made by reliable  
manufacturers.  
CD-R and CD-RW digital audio discs that display either of the  
following marks can be used with this unit.  
FOR CONSUMER  
FOR CONSUMER USE  
FOR MUSIC USE ONLY  
Playback of the CD-R disc copied with the  
Discs that can be used for recording  
• CD-R discs can only be recorded on once, and the recorded  
material cannot be erased.  
Audio Master Quality Recording mode  
The Audio Master Quality Recording mode enables you to create a  
CD with high quality sounds by increasing the linear velocity when  
copying. The CD-R discs copied with this mode meet the CD  
standards and can be played on a standard CD player. However,  
some CD recorders may not play back these CD-R discs properly.  
• CD-RW discs can be recorded on, have the recorded material  
erased, and then recorded on again.  
Discs that cannot be used for recording on  
this unit  
Playback on DVD players  
Before playing back a finalized CD-R or CD-RW discs on a DVD  
player, please check whether the DVD player is compatible with  
CD-R or CD-RW discs or not. Refer to the owner’s manual of the  
DVD player for more information. CD-R or CD-RW discs cannot  
be played on a DVD player that is not compatible with CD-R or  
CD-RW discs.  
• Discs bearing marks other than those shown above.  
• Discs intended for recording computer data.  
• Discs intended for professional use or labeled “FOR  
PROFESSIONAL USE ONLY”.  
79-minute CD-R disc  
The actual recordable time of the CD-R disc with “80” written on  
its package is 79 minutes 57 seconds. This manual describes such  
CD-R disc as “79-minute CD-R disc”.  
IMPORTANT  
• Please check the copyright laws in your country to record  
from records, CDs, radio, etc. Recording of copyright material  
may infringe copyright laws.  
Finalization of CD-R/CD-RW discs  
To play back CD-R discs on a standard CD player and CD-RW  
discs on CD-RW-compatible players, you need to perform the  
process known as “finalization”. In the finalization process, the  
Table of Contents (TOC) is written onto the discs.  
Finalized CD-R discs  
• CD-R discs can be played on a standard CD player.  
• Further recording onto CD-R discs is not possible.  
• Some CD players may not play back the finalized CD-R discs  
properly due to differences in the playback system of different  
manufacturers.  
Finalized CD-RW discs  
• CD-RW discs cannot be played on a standard CD player. CD-RW  
discs can be played back on CD-RW-compatible players such as  
this unit.  
• Tracks written on CD-RW discs can be erased, and additional  
tracks can be recorded after the TOC has been erased.  
Erasure or loss of data  
Yamaha and suppliers accept no liability for the loss of data written  
on the HDD and CD-R or CD-RW discs, or any problems caused as  
a result of using this unit. As a precaution, it is recommended that  
the discs are tested after they have been recorded on. Furthermore,  
under no circumstances do Yamaha and suppliers guarantee the  
reliability of the discs.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES ON DISCS  
Handling of discs  
To prevent a malfunction of this  
unit  
Heed the following notes on handling of discs not to create any  
cause for a recording failure, a loss of the recorded data, or a  
malfunction of this unit.  
• Do not use any non-standard shaped CDs (heart, flower shaped,  
etc.) available on the market, because they are off-balance in their  
weight.  
If a non-standard shaped CD is loaded into this unit, it may create  
problems such as improper playback, opening the disc tray,  
creating an usual noise, and this unit’s failure.  
• This compact disc recorder is designed for use with CDs  
(including 8cm [3”] discs) bearing the following marks only.  
Never attempt to load any other type of disc into this unit.  
• CDs are not subjected to wear during play. However if the disc is  
handled improperly, damage may be created on the disc to  
adversely affect the disc’s play.  
• Be sure to use a felt-tip pen or similar writing tool when writing  
on the label side of the disc. Do not use a ball-point pen, pencil, or  
other hard-tipped writing tool, as these may damage the disc and  
may adversely affect further recording on the disc.  
• When writing on the label side of CD-R or CD-RW discs, use an  
oil-based felt-tipped pen.  
• Do not use cleaning discs or warped discs. All of these could  
damage this unit.  
• Do not use the discs with glue left on their surface. It may get  
stuck in this unit or create damage to this unit.  
• Although playback of CDs is generally not affected by small  
particles of dust or fingerprints on their playing surface, dust,  
fingerprints, small scratches and direct sunlight on the recording  
surface of a CD-R or CD-RW disc may make recording impos-  
sible. Therefore, for optimal performance of the recorder and for  
long-term enjoyment of your CD collection, handle discs  
correctly as outlined in the following guidelines.  
• When using an 8cm (3”) disc, do not place a normal 12cm (5”)  
disc on top of it.  
• Do not use the discs printed with commercially available label  
printers.  
1. Hold discs by touching only the edges or center hole. When  
setting/removing a disc to/from the disc tray, be careful not to  
damage the disc surface.  
2. When a disc is not currently being used, remove it from the  
recorder and store in an appropriate case.  
3. With proper disc maintenance, cleaning should not be  
necessary. However, should cleaning be required, wipe by  
using a clean, dry cloth. Do not wipe with a circular motion;  
wipe straight outward from the center.  
• Do not try to clean the disc’s surface by using any type of disc  
cleaner, record spray, antistatic spray or liquid, or any other  
chemical-based liquid, because such substances might irreparably  
damage the disc’s surface.  
• Do not expose discs to direct sunlight, high temperature, or high  
humidity for a long period of time, because this might warp or  
otherwise damage the disc.  
No!  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
1. GETTING STARTED  
4. CD-R/CD-RW COPYING  
COPYING FROM THE HDD ONTO A  
1
2
3
4
5
6
7
FEATURES ...................................................................... 2  
ABOUT THIS MANUAL .................................................. 2  
Structure ................................................................................ 2  
About this manual.................................................................. 2  
SUPPLIED ACCESSORIES ............................................ 3  
NAMES OF BUTTONS AND CONTROLS ...................... 4  
Front panel ............................................................................. 4  
Remote control ...................................................................... 6  
Display ................................................................................... 8  
Rear panel .............................................................................. 9  
CONNECTIONS ............................................................ 10  
PREPARING THE REMOTE CONTROL ...................... 11  
Installing batteries ............................................................... 11  
Remote control operation range .......................................... 11  
CD-R/CD-RW DISC ................................................... 38  
Copying all tracks in a group to a disc ................................ 38  
Copying selected tracks on the HDD .................................. 40  
Copying high quality sounds  
(Audio Master Quality Recording) ................................. 41  
Setting the CDR copy mode ................................................ 42  
Setting the CDR copy menu ................................................ 43  
DUPLICATING A CD ..................................................... 45  
Duplicating with high quality sounds  
(Audio Master Quality Recording) ................................. 46  
FINALIZING A CD-R/CD-RW DISC............................... 47  
ERASING DATA ON A CD-RW DISC............................ 48  
Erasing last tracks ................................................................ 48  
Erasing all tracks ................................................................. 48  
Erasing TOC ........................................................................ 48  
Initializing a CD-RW disc ................................................... 49  
2. BASIC OPERATIONS  
BASIC OPERATIONAL FLOW ..................................... 12  
TURNING ON/OFF THE UNIT ...................................... 14  
SELECTING THE OPERATIONAL DRIVE  
5. EDITING  
(HDD/CDR) ................................................................ 14  
SELECTING THE GROUP OR TRACK MODE ............ 15  
Data on the HDD ................................................................. 16  
Data on CDs ........................................................................ 17  
SWITCHING DISPLAY INFORMATION ........................ 18  
PLAYING BACK THE HDD OR CD .............................. 19  
USEFUL PLAYBACK OPERATIONS ........................... 20  
Searching by elapsed time (Time Search) ........................... 20  
Setting the play style ........................................................... 20  
Repeating playback of a track (Single Repeat) ................... 21  
Repeating playback of the selected group (Full Repeat) ..... 22  
Playing back randomly (Random Play) ............................... 22  
Playing back only the beginning parts of tracks  
(Intro Play) ...................................................................... 23  
USING THE BOOKMARK LIST .................................... 24  
Adding tracks to the bookmark list ..................................... 24  
Playing back tracks in the bookmark list ............................. 24  
Removing tracks from the bookmark list ............................ 24  
USING ON-SCREEN DISPLAY (OSD).......................... 25  
USING HEADPHONES ................................................. 25  
LIST OF EDIT MENU .................................................... 50  
Cursor button operations in the edit menu .......................... 50  
Entering characters in the edit menu ................................... 51  
EDITING ALBUMS ........................................................ 52  
EDITING TRACKS ........................................................ 58  
EDITING DISCS ............................................................ 66  
CANCELING EDIT OPERATIONS (UNDO) .................. 70  
6. OTHER FEATURES  
CONVERTING DIGITAL/ANALOG OUTPUT SIGNALS  
(DAC MODE) ............................................................. 71  
HDD UTILITY................................................................. 72  
Checking HDD information (HDD Info.) ........................... 72  
Formatting the HDD (HDD Format) ................................... 72  
SYSTEM UTILITY.......................................................... 73  
Checking firmware version (Firm. Version) ........................ 73  
Initializing settings (Initialize) ............................................ 73  
Setting the display brightness (Dimmer Setup) ................... 74  
Setting the video output (VIDEO Output)........................... 74  
Starting playback automatically (Auto Play) ...................... 75  
Updating the firmware version (Firm. Update) ................... 75  
3. HDD RECORDING  
COPYING FROM A CD ONTO THE HDD ..................... 26  
Copying all tracks on a CD ................................................. 26  
Copying selected tracks on a CD......................................... 27  
Selecting a target disc .......................................................... 28  
Setting the HDD copy mode................................................ 28  
Setting the HDD copy menu................................................ 29  
RECORDING FROM AN EXTERNAL COMPONENT  
ONTO THE HDD ........................................................ 31  
Recording input audio source .............................................. 31  
Using an external timer to record ........................................ 32  
Adjusting the recording level .............................................. 34  
Setting the HDD recording mode ........................................ 35  
Adding track markers during recording  
7. APPENDIX  
TROUBLESHOOTING .................................................. 76  
DISPLAY MESSAGES .................................................. 78  
GLOSSARY ................................................................... 80  
LIST OF SYSTEM MENU .............................................. 81  
RULES OF DIGITAL RECORDING AND NOTES ON  
SYSTEM .................................................................... 82  
Rules of digital recording .................................................... 82  
Notes on system ................................................................... 82  
SPECIFICATIONS ......................................................... 83  
(Manual track marking) ................................................... 37  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Beautiful design and easily-viewable front panel display  
Supporting 10x speed HDD recording, 8x speed CD-R copying, and 4x speed CD-RW copying  
Supporting high-capacity HDD (up to 400 GB HDD)  
Long continuous recording of external input source  
Digital (coaxial and optical) and analog input jacks  
Copying high-quality sounds with Audio Master Quality Recording (when copying onto CD-R discs)  
Bookmark feature for easy accesses to favorite tracks  
Timer playback (Auto Play) and timer recording features using a commercially available timer  
On-screen display feature for easy operations  
Various edit menus to customize music data on the HDD  
ABOUT THIS MANUAL  
Structure  
About this manual  
This owner’s manual is composed of following sections.  
• This manual is printed prior to production. Design and  
specifications are subject to change in part for the reason of the  
improvement in operativity ability, and others. In this case, the  
product has priority.  
1. GETTING STARTED  
This section explains necessary preparations such as remote control  
and connection. Please read this before using this unit.  
• Some of the illustrations and names of the package contents etc  
written in this manual may differ from the actual products and the  
names written on the package etc.  
2. BASIC OPERATIONS  
This section explains frequently used operations such as group/  
track selection or playback features.  
3. HDD RECORDING  
This section explains how to copy data from CDs to the HDD or  
record external playback sources onto the HDD.  
4. CD-R/CD-RW COPYING  
This section explains how to copy data from the HDD to a CD-R or  
CD-RW disc, duplicate a CD (copy from a CD to a CD-R/CD-RW),  
or finalize a CD-RW disc.  
5. EDITING  
This section explains how to edit data (albums, tracks, and discs) on  
the HDD. For the guideline, please refer to “LIST OF EDIT  
MENU” (P.50).  
6. OTHER FEATURES  
This section explains how to check the HDD information or change  
the system settings.  
7. APPENDIX  
This section provides you with the information about system setting  
of this unit and troubleshooting.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUPPLIED ACCESSORIES  
Make sure the following items are included in your package.  
1
• Remote Control  
• Batteries (size AA, UM-3, or R6) (2)  
OPEN/CLOSE  
COPY  
A. M. Q. R. TIMER REC  
REC  
• Audio Pin Cables (2)  
FINALIZE ERASE  
INPUT  
REPEAT RANDOM INTRO TEXT/TIME  
ABC  
DEF  
GHI  
1
2
3
JKL  
MNO  
PQR  
4
5
6
STU  
VWX  
YZ  
7
8
9
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
• Optical Cable  
0
MODE  
ENTER  
COMPLETE  
CLEAR  
TRACK NO.  
WRITE  
HDD  
CDR  
• Video Pin Cable  
GROUP SKIP  
• Power Cable (for U.S.A. model)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF BUTTONS AND CONTROLS  
Front panel  
1
2 3  
4
5
6
789 0 q  
w e r  
MULTI JOG  
PUSH ENTER  
NATURAL SOUND HDD/CD RECORDER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
POWER  
TRACK NO. COMPLETE  
BOOKMARK  
DIGITAL REC LEVEL  
HDD  
CDR  
COPY  
PHONES  
LEVEL  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
MIN  
MAX  
MIN  
MAX  
t
y
u
iopas df g h  
1 POWER  
Turns on/off this unit (P.14).  
2 HDD  
Sets the unit to the HDD operation mode (P.14).  
3 CDR  
Sets the unit to the CDR drive operation mode (P.14).  
4 COPY  
Sets the unit to the copy standby mode.  
5 Front panel display  
w MULTI JOG knob/DIGITAL REC LEVEL control  
Normally, press to switch between the GROUP and TRACK  
modes, and rotate to select a group (disc or album) or track.  
In the menu screen, rotate to select items or adjust  
parameters, and press to decide.  
e MENU  
Displays the menu screen corresponding to the current status  
of the unit.  
r CLEAR  
Deletes the selected item or clears the setting.  
Displays information on the current playback or recording.  
You can switch information by pressing TEXT/TIME (P.18).  
t PHONES jack  
Connect headphones (P.25).  
6 Disc tray  
y PHONES LEVEL control  
Set a disc on here when playing a CD, recording track data  
from a CD to the HDD, or copying track data from the HDD  
to a CD-R or CD-RW disc.  
Adjusts the headphone volume when connecting headphone  
to the PHONES jack (P.25).  
u A.M.Q.R.  
7 v (Open/Close)  
Turns on/off the Audio Master Quality Recording (P.41, 46)  
when copying data onto a CD-R disc.  
Opens or closes the disc tray.  
8 TRACK NO./BOOKMARK  
i REC  
Adds track markers (P.37) or bookmarks (P.24) to favorite  
tracks.  
Sets the unit to the recording standby mode.  
o t/e (Skip/Search)  
9 TEXT/TIME  
Press to skip to the beginning of a current track (press  
repeatedly to skip to a previous track), and press and hold to  
fast-rewind the current playback (P.19).  
Switches display information (P.18).  
0 COMPLETE  
Confirms specified operations or selected items.  
p FINALIZE  
Starts to finalize a CD-R or CD-RW disc (P.47).  
q MODE  
Press the button when configuring the settings of the  
playback, recording, and copy modes.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF BUTTONS AND CONTROLS  
a ERASE  
Select items to be erased when erasing data (track data or  
1
TOC) from a CD-RW disc (P.48).  
s r/y (Search/Skip)  
Press to skip to a next track and press and hold to fast-  
forward the current playback (P.19).  
d INPUT  
Switches input sources (OPTICAL, COAXIAL, and  
ANALOG) (P.31). The lamp for the selected input lights up.  
f w/d (Play/Pause)  
Starts playback of the currently selected group or track.  
Pressing the button during playback stops the playback  
temporarily (P.19).  
In the copy or recording standby mode, press the button to  
start recording.  
g ANALOG REC LEVEL control  
Adjust the recording level when recording analog sources  
(P.34).  
h a (Stop)  
Stops playback (P.19).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF BUTTONS AND CONTROLS  
1 v OPEN/CLOSE  
Opens or closes the disc tray.  
2 COPY  
Sets the unit to the copy standby mode.  
3 A.M.Q.R.  
Turns on/off the Audio Master Quality Recording (P.41, 46)  
when copying data onto a CD-R disc.  
4 FINALIZE  
Starts to finalize a CD-R or CD-RW disc (P.47).  
5 ERASE  
Remote control  
OPEN/CLOSE  
1
COPY  
A. M. Q. R. TIMER REC  
REC  
2
3
4
5
6
7
u
i
o
FINALIZE ERASE  
INPUT  
REPEAT RANDOM INTRO TEXT/TIME  
p
a
Select items to be erased when erasing data (track data or  
TOC) from a CD-RW disc (P.48).  
ABC  
DEF  
GHI  
1
2
3
JKL  
MNO  
PQR  
6 REPEAT  
4
5
6
Turns on/off the Repeat Play (Single Repeat and Full  
Repeat) mode (P.21, 22).  
STU  
VWX  
YZ  
8
7
8
9
7 RANDOM  
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
0
Turns on/off the Random Play mode (P.22).  
s
d
MODE  
8 Alphabetical/numeric buttons  
9
0
q
Selects track number to be played back or enters titles of  
albums or tracks.  
ENTER  
9 MODE  
COMPLETE  
CLEAR  
Press the button when configuring the settings of the  
playback, recording, and copy modes.  
f
g
TRACK NO.  
WRITE  
0 Cursor buttons (H, G,  
Q
,
W), ENTER  
HDD  
CDR  
Normally, press ENTER to switch between the GROUP and  
TRACK modes. If the unit is in the GROUP mode, press H  
or G to select a group, and press  
w
Q
or  
W
to select a track. If  
the unit is in the TRACK mode, press the cursor buttons to  
select a track.  
h
j
e
r
t
y
In the menu screen, press the cursor buttons to select items  
or adjust parameters, and press ENTER to decide.  
k
q COMPLETE  
Confirms specified operations or selected items.  
w +/–  
GROUP SKIP  
l
;
Press + to move to the next menu and press – to move to the  
previous menu. Also, you can use these buttons to adjust  
parameters.  
e 1 (Search)  
Press and hold to fast-rewind the current playback (P.19).  
r A (Stop)  
Stops playback (P.19)  
t 4 (Track Skip)  
Press to skip to the beginning of the current track (press  
repeatedly to skip to the previous track) (P.19).  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF BUTTONS AND CONTROLS  
y W/D (Play/Pause)  
Starts playback of the currently selected group or track.  
1
Pressing the button during playback stops the playback  
temporarily (P.19).  
In the copy or recording standby mode, press the button to  
start recording.  
u REC  
Sets the unit to the recording standby mode.  
i TIMER REC  
Press the button when configuring the time for timer  
recording (P.32).  
o INPUT  
Switches input sources (OPTICAL, COAXIAL, and  
ANALOG) (P.31). The lamp for the selected input lights up.  
p TEXT/TIME  
Switches display information (P.18).  
a INTRO  
Turns on/off the Intro Play mode (P.23).  
s BOOKMARK  
Adds bookmarks to favorite tracks (P.24).  
d MENU  
Displays the menu screen corresponding to the current status  
of the unit.  
f CLEAR  
Deletes the selected item or clears the setting.  
g HDD, CDR  
Switches the unit between the HDD and CDR drive  
operation modes (P.14).  
h TRACK NO. WRITE  
Adds track markers to tracks (P.37).  
j R (Search)  
Press and hold to fast-forward the current playback (P.19).  
k Y (Track Skip)  
Press to skip to the next track (P.19).  
l GROUP SKIP W  
Press to skip to the next group (P.19).  
; GROUP SKIP Q  
Press to skip to the previous group (P.19).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF BUTTONS AND CONTROLS  
Display  
1
2
3
4
5
6
7
REC  
LEVEL  
8 8 8 8 8 8 8 8 8 8 8 8 8  
TRACK  
L
ALBM TOTAL DUPLCTA.M.Q.R.AUTO PRD DIGM  
MARK SG A REP RNDM MULT ALL SYNC ANLG  
TOC GROUP  
CDRW TIME  
dB  
R
–30 –10  
–6  
–2  
0
q
w
e
t
y
8 9  
0
r
1 HDD mark  
Lights when the unit is in the HDD operation mode.  
2 TOTAL indicator  
REP indicator  
Lights when the Repeat Play mode is turned on. When  
selecting the Single Repeat mode, “S REP” appears.  
RNDM indicator  
Lights when the total time (elapsed or remaining time) is  
displayed.  
Lights when the Random Play mode is turned on.  
q Recording/copying mode indicator  
3 DUPLCT indicator  
AUTO indicator  
Lights when the unit is in the copy standby mode or copying  
process when duplicating a CD.  
Lights when any AUTO feature is turned on. When selecting  
the auto-period recording, “AUTO PRD” appears.  
4 A.M.Q.R. indicator  
SYNC indicator  
Lights when the Audio Master Quality Recording is turned  
on.  
Lights when the unit is in a synchronized copying mode.  
When selecting the multi-synchronized copying, “MULT  
SYNC” appears, and when selecting the all-synchronized  
copying, “ALL SYNC” appears.  
5 Information display  
Displays information (playback/recording time, titles, etc)  
on the selected drive. You can switch information by  
pressing TEXT/TIME (P.18).  
w Copying method indicator  
DIG indicator  
6 CDR mark  
Lights when the unit is in the digital copy process. When the  
unit is in the Digital Move process, “DIG M” appears.  
Lights when a disc is set in the disc tray and the unit is in the  
CDR operation mode.  
ANLG indicator  
7 REC indicator  
Lights when the unit is in the analog copy process.  
Lights when the unit is in the copy standby mode or copying  
process when recording/copying onto the HDD, CD-R disc,  
or CD-RW disc.  
e Level meter  
Displays the recording level or the progress of an executed  
process (finalization, etc).  
8 ALBM indicator  
Lights when selecting an album.  
9 MARK indicator  
r TOC indicator  
Lights when a disc set in the disc tray has a TOC (disc  
information).  
Lights when selecting a bookmarked track.  
t Disc indicator  
0 Playback mode/play style indicator  
G indicator  
Displays the type of a disc set in the disc tray.  
y MULTI JOG status indicator  
Lights when “Style Group” is set as the play style.  
A indicator  
Displays the currently selected MULTI JOG status (items or  
settings controlled by MULTI JOG knob operations).  
Lights when “Style All” is set as the play style.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF BUTTONS AND CONTROLS  
Rear panel  
1
For details about HDD installation, refer to “INSTALLING THE HDD” of the “HDD Installation Manual”. For details about how to connect  
other components, refer to “CONNECTIONS” (P.10).  
1
2
3
VIDEO  
OUT  
S
VIDEO  
VIDEO  
L
L
R
R
REC  
PLAY  
COAXIAL  
OPTICAL  
COAXIAL  
OPTICAL  
4
3
LINE IN  
LINE OUT  
IN  
OUT  
RS–232C  
ANALOG  
DIGITAL  
(U.S.A. model)  
4
5
6
1 HDD slot  
Open the cover when replacing the HDD.  
2 VIDEO OUT jacks  
5 DIGITAL jacks  
DIGITAL IN (COAXIAL) jack  
Inputs digital signals.  
DIGITAL IN (OPTICAL) jack  
Inputs digital signals.  
S VIDEO jack  
Outputs S-video signals.  
VIDEO jack  
DIGITAL OUT (COAXIAL) jack  
Outputs digital signals.  
Outputs composite video signals.  
DIGITAL OUT (OPTICAL) jack  
Outputs digital signals.  
3 AC inlet (U.S.A. model only)  
Plug the power cable to this inlet. (Be sure to connect the  
power cable after connecting all other cables.)  
6 RS-232C terminal  
This terminal is for connecting a personal computer.  
Information about the PC software (English version only) is  
to be announced on the YAMAHA Website  
4 ANALOG jacks  
ANALOG LINE IN (REC) jacks  
Inputs analog signals.  
(http://www.yamaha.co.jp/english/product/av/).  
ANALOG LINE OUT (PLAY) jacks  
Outputs analog signals.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Turn off the power of this unit and the other components, and unplug them from the wall outlet before making any connections. Follow the  
diagram below to make connections with proper cables.  
Digital connections  
• To output signals from this unit to an external component, connect DIGITAL OUT jack of this unit to the digital input jack of the external  
component. To input signals from an external component to this unit, connect DIGITAL IN jack of this unit to the digital output jack of the  
external component.  
• This unit cannot input digital signals other than PCM signals.  
Analog connections  
• To output signals from this unit to an external component, connect ANALOG LINE OUT jack of this unit to the analog input jack of the  
external component. To input signals from an external component to this unit, connect ANALOG LINE IN jack of this unit to the analog  
output jack of the external component. Be sure to connect L (left) and R (right) jacks respectively  
• To connect the turntable directly to this unit, first connect it to the phono equalizer and then connect to the ANALOG LINE IN (REC) jacks  
on this unit.  
Memo  
• When you play the data on the HDD or CDs, signals are output both from the ANALOG LINE OUT (PLAY) jack and from the DIGITAL  
OUT (OPTICAL/COAXIAL) jacks.  
• Signals that are output through the DIGITAL OUT (OPTICAL) jacks or the DIGITAL OUT (COAXIAL) jacks while playing the data on  
the HDD do not have information about the track markers. Therefore if these signals are recorded by an MD player, the track markers may  
not be placed correctly on the recorded MD disc.  
Arrow marks () in the illustration below  
indicate the direction of signals.  
Monitor  
DVD player, cable TV tuner, etc  
Coaxial cable  
(optional)  
DIGITAL  
OUTPUT  
VIDEO IN  
S VIDEO  
VIDEO  
COAXIAL  
S-video cable  
(optional)  
Video pin cable  
(included)  
VIDEO  
OUT  
S
VIDEO  
VIDEO  
L
L
R
R
REC  
PLAY  
COAXIAL  
OPTICAL  
COAXIAL  
OPTICAL  
4
3
LINE IN  
LINE OUT  
IN  
OUT  
RS–232C  
ANALOG  
DIGITAL  
(U.S.A. model)  
*RS-232C terminal  
Audio pin cable  
(included)  
Optical cable  
(one included)  
To wall outlet  
DIGITAL  
INPUT  
Audio pin cable  
(included)  
COAXIAL  
Coaxial cable  
(optional)  
PLAY  
REC  
L
L
OPTICAL  
R
R
IN  
OUT  
OPTICAL  
Amplifier or receiver  
DIGITAL  
OUTPUT  
* This terminal is for connection of the personal computer. Information about the PC software (English version only) is to be  
announced on theYAMAHA Website (http://www.yamaha.co.jp/english/product/av/).  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting a monitor  
1
You can display the list of groups or tracks to be played, copying/recording settings or the list of setting items on the monitor by connecting  
the monitor to this unit. Connect the S VIDEO jack or the VIDEO jack whichever available on your monitor.  
Connecting the power cable  
[U.S.A. model]  
Plug the power cable into the AC inlet when all connections are complete, and then plug in the power cable to the wall outlet.  
[Europe, U.K. and Australia models]  
Plug in this unit to the wall outlet when all connections are complete.  
PREPARING THE REMOTE CONTROL  
Installing batteries  
Remote control operation range  
MULTI JOG  
NATURAL SOUND HDD/CD RECORDER  
PUSH ENTER  
TEXT/TIME  
MODE  
MENU  
1. Press the hook (h) of the battery cover to remove it.  
POWER  
TRACK NO. COMPLETE  
CLEAR  
BOOKMARK  
DIGITAL REC LEVEL  
HDD  
CDR  
COPY  
2. Insert 2 batteries (AA, UM-3 or R6 type) according to  
the polarity markings on the inside of the battery  
compartment.  
PHONES  
LEVEL  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
MIN  
MAX  
MIN  
MAX  
3. Close the cover until it snaps into place.  
Remote control sensor  
Within 6m (20’)  
Battery replacement  
If you find that the remote control must be used closer to this unit  
than usual, the batteries are weak. Replace both batteries with new  
ones.  
Notes  
• If operation of this unit by the remote control creates any  
malfunction in any other components, change the placement of  
the component.  
Notes on batteries  
• Do not spill any liquid on or drop the remote control. Do not  
place it near a heater or in the bathroom where the temperature  
and humidity become high.  
• Use only AA, UM-3, or R6 type batteries for replacement.  
• Do not mix a new battery with a used one.  
• A rechargeable battery cannot be used.  
• Make sure the remote control sensor is not exposed to direct  
sunlight or strong lights. If it is, it may not function correctly.  
• Do not mix different types of battery.  
• Do not attempt to short out the batteries by directly connecting the  
plus (+) and the minus (–) with a piece of metal.  
• Remove the batteries if the remote control will not be used for an  
extended period of time.  
If the batteries leak, dispose of them immediately, taking care not  
to touch the battery fluid. If the battery fluid comes into contact  
with your eyes, mouth, or skin, rinse it off with water immediately,  
and consult a doctor. Clean the battery compartment thoroughly  
before installing new batteries.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONAL FLOW  
Once you have finished all connections (P.10) and prepared the remote control (P.11), please follow the procedure below to copy music data  
from a CD to the HDD and listen to it!  
(In this procedure, we use a remote control to operate the unit although buttons on the unit control it in the same way.)  
POWER  
Disc tray  
f
Press POWER on the unit to turn it  
on.  
1
NATURAL SOUND HDD/CD RECORDER  
TEXT/TIME  
POWER  
TRACK NO.  
BOOKMARK  
The display shows the “WELCOME” message,  
then the unit becomes ready to operate.  
HDD  
CDR  
COPY  
PHONES  
LEVEL  
REC  
FINALIZE  
ERA  
A.M.Q.R.  
MIN  
MAX  
OPEN/CLOSE  
Set a CD on the disc tray.  
2
COPY  
A. M. Q. R. TIMER REC  
REC  
COPY  
Press f to open/close the disc tray.  
FINALIZE ERASE  
INPUT  
REPEAT RANDOM INTRO TEXT/TIME  
Place a CD properly as aligned in the recess with its label side  
facing up.  
ABC  
DEF  
GHI  
1
2
3
JKL  
MNO  
PQR  
4
5
6
STU  
VWX  
YZ  
7
8
9
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
0
MODE  
ENTER  
COMPLETE  
CLEAR  
TRACK NO.  
WRITE  
HDD  
CDR  
HDD  
A
W/D  
GROUP SKIP  
The unit starts to read the disc information (disc type and disc  
capacity), then “Reading” appears in the display (the process  
may take 10 to 20 seconds depending on the disc condition).  
R e a d i n g  
L
dB  
R
–30 –10  
–6  
–2  
0
When the disc information is read completely, the display  
changes as follows, and the unit becomes ready to be operated.  
Press COPY once to set the unit to  
the copy standby mode.  
3
Total number of tracks  
Total time  
The HDD and CDR marks in the display start to  
blink.  
14  
6 8 17  
–30 –10 –6 –2  
L
dB  
R
TOC GROUP  
CD  
0
REC  
0 0 1 1 π 1  
ALL SYNC  
0 0 0  
–6 –2  
L
dB  
R
DIG  
TOC GROUP  
CD  
1
–30 –10  
0
L
dB  
R
TOC GROUP  
CD  
–30 –10  
–6  
–2  
0
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONAL FLOW  
Press W/D to start copy.  
When copy is finished, press HDD to  
select the HDD.  
4
5
The display shows the progress of the copy  
process.  
The HDD mark in the display lights and HDD  
information appears.  
2
REC  
0 0 1 1 π 1  
ALL SYNC  
0 0 1  
–6 –2  
D 0 0 1 1  
6 5 4 5  
–30 –10 –6 –2  
L
dB  
R
L
dB  
R
DIG  
TOC GROUP  
CD  
TOTAL  
G
GROUP  
–30 –10  
0
0
Press W/D to start playback of the  
To stop playback, press A.  
7
6
tracks you just recorded on the HDD.  
If you press W/D again, playback starts from the  
To skip tracks or fast-rewind/-forward, refer to  
“PLAYING BACK THE HDD OR CD” (P.19).  
beginning of the currently selected track.  
D 0 0 1 1  
G
0 0 4  
–6 –2  
L
dB  
R
GROUP  
–30 –10  
0
Now, please try various features of this unit!  
•To enjoy playback with Repeat Play, Random Play, Intro Play features  
“USEFUL PLAYBACK OPERATIONS” (P.20-23)  
•To start playback automatically using external timer  
“Starting playback automatically (Auto Play)” (P.75)  
•To copy from the HDD to CD-R/CD-RW discs  
“COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC” (P.38-44)  
•To record external sources on the HDD  
“RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD” (P.31-37)  
•To edit the HDD data (albums, tracks and discs)  
“5. EDITING” (P.50-70)  
This unit equips various useful features other than those above.  
Please read this manual carefully and enjoy pleasant music environment with this unit.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TURNING ON/OFF THE UNIT  
POWER  
MULTI JOG  
PUSH ENTER  
NATURAL SOUND HDD/CD RECORDER  
TEXT/TIME  
MODE  
MENU  
POWER  
TRACK NO. COMPLETE  
BOOKMARK  
CLEAR  
DIGITAL REC LEVEL  
HDD  
CDR  
COPY  
PHONES  
LEVEL  
ANALOG REC LEVEL  
INPUT  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
MIN  
MAX  
MIN  
MAX  
Press POWER on the front panel.  
Notes  
When the unit turns on, the message “WELCOME TO YAMAHA  
HDD/CD SYSTEM” appears on the front panel display, then the  
unit becomes ready to be operated.  
• Do not turn off the unit during playback or recording. Doing so  
may damage the HDD or data.  
• If the message “Wait” appears in the display for 20 seconds or  
more after turning on the unit, the HDD may not be installed  
properly. Refer to the “HDD Installation Manual” and check the  
connection.  
For information on specifications such as power consumption, refer  
to “SPECIFICATIONS” (P.83).  
SELECTING THE OPERATIONAL DRIVE (HDD/CDR)  
This unit equips the HDD and CDR drive. When operating the unit, you need to select HDD or CDR drive in accordance with your purpose.  
MULTI JOG  
NATURAL SOUND HDD  
/CD RECORDER  
MODE  
MENU  
PUSH ENTER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
POWER  
TRACK NO. COMPLETE  
BOOKMARK  
ENTER  
DIGITAL REC LEVEL  
HDD  
CDR  
COPY  
COMPLETE  
CLEAR  
PHONES  
LEVEL  
ANALOG REC LEVEL  
INPUT  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
MIN  
MAX  
MIN  
MAX  
TRACK NO.  
WRITE  
HDD  
HDD  
CDR  
CDR  
HDD CDR  
To operate the HDD drive, press HDD.  
GROUP SKIP  
The HDD mark lights in the display, and the disc information  
appears.  
To operate the CDR drive, press CDR.  
The unit starts to read the information of a disc set in the disc tray.  
When the disc information is read completely, the CDR mark lights  
in the display, and the disc information appears.  
When no disc is set in the disc tray, the message “No Disc” appears.  
Memo  
If you set a disc in the disc tray, the unit automatically switches to  
the CDR drive operation mode.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING THE GROUP OR TRACK MODE  
When starting playback or recording, you need to select the group or track mode at first, and then select an item (disc, album, track, etc) to  
operate. The types of group you can select vary depending on the drives (HDD and CDR drive). For details, refer to “Data on the HDD”  
(P.16) and “Data on CDs” (P.17).  
2
MULTI JOG  
MODE  
MENU  
MULTI JOG  
PUSH ENTER  
NATURAL SOUND HDD/CD RECORDER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
ENTER  
H, G  
ENTER  
POWER  
TRACK NO. COMPLETE  
BOOKMARK  
COMPLETE  
CLEAR  
DIGITAL REC LEVEL  
HDD  
CDR  
COPY  
PHONES  
LEVEL  
ANALOG REC LEVEL  
INPUT  
TRACK NO.  
WRITE  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
HDD  
MIN  
MAX  
MIN  
MAX  
+, –  
CDR  
GROUP SKIP  
1. Press the MULTI JOG knob (ENTER on the remote  
control) to switch between the group and track mode.  
When the group mode is selected, GROUP indicator lights.  
When the track mode is selected, TRACK indicator lights.  
GROUP indicator  
L IV E A T C R A N E  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
G
When the group mode is selected  
TRACK indicator  
P R ID E A N D J O Y  
TRACK  
L
dB  
R
–30 –10  
–6  
–2  
0
G
When the track mode is selected  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select an item to operate.  
If you select the GROUP mode in step 1, the item changes as  
follows:  
(When the unit is in the HDD operation mode)  
Disc (1, 2...)  
Album (1, 2...)  
Bookmark  
(When the unit is in the CDR operation mode)  
Disc Bookmark  
If you select the TRACK mode in step 1, the item changes as  
follows:  
Track1  
Track2...  
Track99  
3. Start operations (playback, recording, etc) for any  
purpose.  
For details on playback operations, refer to “PLAYING BACK  
THE HDD OR CD” (P.19). For details on recording operations,  
refer to “3. HDD RECORDING” (P.26-37) or “4. CD-R/CD-  
RW COPYING” (P.38-49).  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING THE GROUP OR TRACK MODE  
Data on the HDD  
The data recorded onto the built-in HDD of this unit will be numbered and organized based on the following concept:  
Bookmark  
Group  
This unit can make a temporary bookmark on a favorite track as  
A collection of disc(s), album(s), and a bookmark are generically  
called “group”.  
playing back. The list of the program sources marked is called  
“bookmark”. This marking is temporary and cannot be duplicated.  
However, an album can be easily created by copying the  
bookmarked tracks (P.54).  
Disc  
One consequent recording is counted and numbered as one unit of  
disc. The HDD of this unit can record 999 discs at maximum.  
(However, the number of discs to be created may be less than 999  
for the space availability on the HDD.) The maximum length of one  
disc on the HDD is 179 minutes 59 seconds.  
Track  
99 tracks can be recorded onto a disc at maximum. (However the  
number of discs tracks to be recorded may be less than 99 for the  
space availability on the HDD.) One track must be 4 seconds at  
shortest and 179 minutes 59 seconds at longest.  
Album  
A group of the source programs selected from different discs and  
recorded as the playlist is called “album”. “Album” corresponds to  
the “program” function (to play back favorite tracks in the desired  
order) of a standard CD player. This unit can record 999 albums at  
maximum onto the HDD.  
Disc  
Album  
Disc1  
Album1  
ALBUM  
Track1  
Track2  
Track3  
Track4  
Track1-1  
Track1-2  
Track1-3  
Track1-4  
Track1  
Track2  
Track3  
...  
Link to Disc1:Track1  
Link to Disc1:Track2  
Link to Disc2:Track2  
...  
Track99  
Track1-99  
Disc2  
Album  
ALBUM  
Track1  
Track2  
Track3  
Track4  
Track2-1  
Track2-2  
Track2-3  
Track2-4  
Track1  
Track2  
...  
Link to Disc1:Track3  
Link to Disc2:Track1  
...  
Track99  
Track2-99  
Album999  
ALBUM  
Bookmark  
Bookmark  
BOOK  
MARK  
Track1  
Track2  
Track3  
...  
Link to Disc1:Track4  
Link to Disc2:Track3  
Link to Disc2:Track4  
Disc999  
Memo  
• Albums and bookmark list do not include any track data in themselves. They recall track data saved in discs using links.  
• When playing the bookmark list, tracks are played in the order you added a bookmark.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING THE GROUP OR TRACK MODE  
Data on CDs  
You can operate CDs (including CD-R and CD-RW) set in the CDR drive by group (disc or bookmark) or track.  
2
Group  
Track  
When operating CDs (including CD-R and CD-RW), you can select  
disc or bookmark as a group. Since the unit can only read one disc  
at a time, the number of discs available on a CD is always one. In  
addition, bookmarks on a CD will be erased if CD is removed from  
the unit or the unit is turned off.  
The number of tracks recorded onto a disc varies. Also, storage  
capacity varies depending types of discs. For details, refer to  
descriptions stated in each disc.  
Disc  
Bookmark  
Disc CD  
Bookmark  
BOOK  
MARK  
Track1  
Track2  
Track3  
Track4  
Track1  
Track2  
Track3  
Track4  
Track1  
Track2  
Track3  
Link to Track1 on the disc  
Link to Track4 on the disc  
Link to Track99 on the disc  
...  
Track99  
Track99  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SWITCHING DISPLAY INFORMATION  
The display located in the center of this unit provides the information about the drive (HDD or CDR drive) selected.  
Each time TEXT/TIME is pressed, the display changes according to the operation.  
Display while playing the data on the HDD  
Display while playing a CD  
Group number, track number and elapsed time of the  
track being played  
Track number and elapsed time of the track being played  
1
0 0 4  
–6 –2  
L
dB  
R
TOC GROUP  
CD  
–30 –10  
0
D 0 0 1 1  
G
0 0 4  
–6 –2  
L
dB  
R
GROUP  
–30 –10  
0
Track number and remaining time of the track being  
played  
Group number, track number and remaining time of the  
track being played  
1
- 2 2 1  
L
TOC GROUP  
CD  
dB  
R
–30 –10  
–6  
–2  
0
D 0 0 1 1  
G
- 2 2 1  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
Disc total time  
Group number and group total time  
6 5 4 5  
L
dB  
R
TOTAL  
TOC GROUP  
CD  
–30 –10  
–6  
–2  
0
D 0 0 1 1  
6 5 4 5  
–30 –10 –6 –2  
L
dB  
R
TOTAL  
G
GROUP  
0
Disc remaining time  
Group number and group remaining time  
- 6 2 4 0  
L
TOTAL  
TOC GROUP  
CD  
dB  
R
–30 –10  
–6  
–2  
0
D 0 0 1 1  
- 6 2 4 0  
L
TOTAL  
G
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
CD TEXT (when available)  
Disc title  
Group title or track title  
Group title  
L IV E A T C R A N E  
L
TOC GROUP  
CD  
dB  
R
–30 –10  
–6  
–2  
0
L IV E A T C R A N E  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
G
Track title  
Track title  
P R ID E A N D J O Y  
TRACK  
TOC  
L
dB  
R
–30 –10  
–6  
–2  
0
P R ID E A N D J O Y  
CD  
TRACK  
L
dB  
R
–30 –10  
–6  
–2  
0
G
Display while recording onto a CD-R or  
CD-RW disc  
The group title with the GROUP indicator and the track title with  
the TRACK indicator are switched by pressing the MULTI JOG  
knob.  
Track number and elapsed time of the track being  
recorded  
Display while recording onto the HDD  
REC  
Disc number, track number and elapsed time of the track  
being recorded  
1
0 0 4  
–6 –2  
L
dB  
R
GROUP  
CDRW  
–30 –10  
0
REC  
D 0 0 1 1  
0 0 4  
–6 –2  
Total recorded time on a disc  
L
dB  
R
–30 –10  
0
REC  
15 4 3  
Disc number and total recorded time on the disc  
L
dB  
R
TOTAL  
GROUP  
–30 –10  
–6  
–2  
0
CDRW  
REC  
D 0 0 1  
15 4 3  
–30 –10 –6 –2  
Total recordable time on a disc  
L
dB  
R
TOTAL  
0
REC  
1
- 2 2 1  
L
TOTAL  
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
CDRW  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING BACK THE HDD OR CD  
Follow the procedure below to carry out basic playback operations. This unit also provides various useful functions for playback. For  
details, refer to “USEFUL PLAYBACK OPERATIONS” (P.20-23).  
ABC  
DEF  
GHI  
1
2
3
JKL  
MNO  
PQR  
2
4
5
6
STU  
VWX  
YZ  
Alphabetical/  
numeric buttons  
7
8
9
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
0
MODE  
MULTI JOG  
MULTI JOG  
PUSH ENTER  
ER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
ENTER  
Cursor buttons  
TRACK NO. COMPLETE  
BOOKMARK  
COMPLETE  
CLEAR  
DIGITAL REC LEVEL  
COPY  
TRACK NO.  
WRITE  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
HDD  
CDR  
A.M.Q.R.  
MIN  
MAX  
+, –  
A
t/e r/y w/d  
a
E
R
Y
T
W/D  
GROUP SKIP buttons  
GROUP SKIP  
To start playback  
To skip tracks  
After selecting a group or track (P.15), press w/d.  
To skip to beginning of the current track, press t/e (T on the  
remote control) once.  
To stop playback  
Press a.  
To skip to a previous track, press t/e (T on the remote  
control) twice.  
To skip to a next track, press r/y (Y on the remote control).  
Memo  
Memo  
If you press w/d after playback is stopped by pressing a, the unit  
automatically starts playback from the beginning of the track that  
has been stopped (Resume Play). To cancel the Resume Play  
feature, press a while playback is stopped. In this case, the unit  
starts playback from the beginning of the first track recorded on a  
disc (or an album) or a CD.  
You can also skip a track by rotating MULTI JOG knob (pressing  
+/– or the cursor buttons on the remote control) while the unit is  
in the track mode (P.15).  
You can also directly select a track number by pressing alphabeti-  
cal/numerical buttons.  
To stop playback temporarily (Pause)  
To skip groups  
Press w/d during playback. To restart playback, press w/d again.  
To skip to a previous group, press GROUP SKIP Q on the remote  
control.  
To fast-rewind or fast-forward  
To skip to a next group, press GROUP SKIP W on the remote  
control.  
To fast-rewind, press and hold t/e (E on the remote control)  
during playback. To fast-forward, press and hold r/y (R on  
the remote control) during playback. To return to normal playback,  
release the button.  
Memo  
You can also skip a group by rotating MULTI JOG knob (pressing  
+/–, H or G on the remote control) while the unit is in the group  
mode (P.15).  
Memo  
You can also use the search feature while playback pauses. In this  
case, the unit does not output any sounds while searching.  
• Neither search nor pause is possible at the interval added by  
“Tr. Interval” in the album edit menu (P.57).  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USEFUL PLAYBACK OPERATIONS  
You can enjoy playback with various useful features with this unit.  
Searching by elapsed time  
Setting the play style  
(Time Search)  
Only when playing sources recorded on the HDD, you can set the  
play style. The play style setting changes the range of playback.  
You can search the desired part by setting the time.  
1. While the unit is in the HDD operation mode, press  
1. Press MODE to enter the playback mode setting.  
MODE to display the playback mode setting.  
“Time Search” appears on the display.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to display “Play Style”.  
T i m e S e a r c h  
G
L
dB  
R
–30 –10  
–6  
–2  
0
P la y S t y le  
L
dB  
R
–30 –10  
–6  
–2  
0
G
2. Press the MULTI JOG knob (ENTER on the remote  
control).  
3. Press the MULTI JOG knob (ENTER on the remote  
The following message appears on the display.  
control) to start the play style setting.  
4. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to display “Style All” or “Style  
Group”.  
D 0 0 1 1 S  
G
5 0 0  
–6 –2  
L
dB  
R
–30 –10  
0
TIME  
3. To switch between minute and second, press t/e  
or r/y (E, R, or on the remote control). To  
S t y le A ll  
Q
W
L
dB  
R
–30 –10  
–6  
–2  
0
A
specify time, rotate the MULTI JOG knob (press +/–, H  
or G on the remote control).  
If you stop rotating the MULTI JOG knob, this unit starts  
searching the set time and starts playback from the set time.  
S t y le G r o u p  
L
dB  
R
–30 –10  
–6  
–2  
0
G
Memo  
5. Press the MULTI JOG knob (ENTER on the remote  
You can skip to other tracks by pressing T or Y on the  
remote control. When the track is skipped to another track,  
the set time will be reset to “0:00”.  
control) to confirm the selection.  
When selecting “Style All”  
The A indicator lights on the display.  
You can skip to other groups by pressing GROUP SKIP Q or  
GROUP SKIP W on the remote control. When the group is  
skipped to another group, the set time will be reset to “0:00”.  
A
You cannot search (P.19) during the time search mode.  
You cannot search by time during the random play (P.22) or  
the intro play (P.23).  
Random play, full repeat play, or intro play can be set for one of the  
group categories (disc, album, and bookmark) recorded on the  
HDD.  
4. Press w/d or MODE to return to the normal playback.  
Disc 1  
Disc 2  
Album 1  
Group category for making a  
setting  
Album 2  
Bookmark  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USEFUL PLAYBACK OPERATIONS  
• When random play is set, all tracks that belong to the selected  
group category are played in a random sequence.  
Repeating playback of a track  
• When full repeat play is set, all tracks that belong to the selected  
group category are repeatedly played.  
(Single Repeat)  
You can listen to a single desired track or to a track being played  
repeatedly.  
• When intro play is set, the beginnings of all tracks that belong to  
the selected group category are played one after another.  
2
1. Press MODE to enter the playback mode setting, then  
rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to display “Repeat”.  
For example, if full repeat play is set during the playback of disc 1,  
all tracks recorded to discs 1 and 2 are repeatedly played.  
Memo  
• If “Style All” is set and the title is shown on the display, the sound  
may be missing when this unit switches from one disc to another.  
To avoid this problem, switch the display to from the indication of  
time by pressing TEXT/TIME (P.18).  
R e p e a t  
L
dB  
R
–30 –10  
–6  
–2  
0
2. Press the MULTI JOG knob (ENTER on the remote  
• Select “Style All” when sequentially playing the sources recorded  
for long hours extending several discs.  
control) to enter repeat play setting.  
3. Rotate the MULTI JOG knob (press +/–, H or G on the  
When selecting “Style Group”  
remote control) to display “Repeat Single”.  
The G indicator lights on the display.  
R e p e a t S i n g le  
L
G
dB  
R
–30 –10  
–6  
–2  
0
Random play, full repeat play, or intro play can be set for one of the  
groups (disc, album, and bookmark) recorded on the HDD.  
4. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the selection.  
The S REP indicator lights on the display.  
Disc 1  
Disc 2  
S
REP  
Album 1  
Album 2  
Group for making a setting  
Notes  
• Single repeat play can be easily set by pressing REPEAT on the  
remote control once.  
Bookmark  
• When random play is set, all tracks that belong to the selected  
group are played in a random sequence.  
• The track being played is repeatedly played even during playback  
of an album or random play.  
• When full repeat play is set, all tracks that belong to the selected  
group are repeatedly played.  
To cancel the Single Repeat setting  
• When intro play is set, the beginnings of all tracks that belong to  
the selected group are played one after another.  
Select “Repeat Off” in step 3 or press REPEAT on the remote  
control until the S REP indicator turns off on the display.  
For example, if full repeat play is set during the playback of disc 1,  
all tracks recorded to disc 1 are repeatedly played.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USEFUL PLAYBACK OPERATIONS  
Repeating playback of the selected  
Playing back randomly  
group (Full Repeat)  
(Random Play)  
You can repeatedly listen to all tracks recorded in a group (or a CD)  
or group category.  
You can listen to all tracks recorded in a group on the HDD or on a  
CD in a random sequence.  
1. Press MODE to enter the playback mode setting, then  
rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to display “Repeat”.  
1. Press MODE to enter the playback mode setting, then  
rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to display “Random”.  
R e p e a t  
R a n d o m  
G
L
L
dB  
R
–30 –10  
–6  
–2  
0
dB  
R
–30 –10  
–6  
–2  
0
2. Press the MULTI JOG knob (ENTER on the remote  
2. Press the MULTI JOG knob (ENTER on the remote  
control) to enter repeat play setting.  
control) to enter random play setting.  
3. Rotate the MULTI JOG knob (press +/–, H or G on the  
3. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to display “Repeat Full”.  
remote control) to display “Random On”.  
R e p e a t F u ll  
R a n d o m O n  
L
dB  
R
–30 –10  
–6  
–2  
0
L
G
dB  
R
–30 –10  
–6  
–2  
0
G
RNDM  
4. Press the MULTI JOG knob (ENTER on the remote  
4. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the selection.  
control) to confirm the selection.  
The REP indicator lights on the display.  
The RNDM indicator lights on the display.  
G
REP  
G
RNDM  
Notes  
Notes  
• Full repeat play can be easily set by pressing REPEAT on the  
remote control twice.  
• Random play can be easily set by pressing RANDOM on the  
remote control.  
• The tracks are repeatedly played in the same random order if  
played in the random play mode.  
• If random play is set during playback, the new setting applies to  
the next track.  
To cancel the Full Repeat setting  
To cancel the Random Play setting  
Select “Repeat Off” in step 3 or press REPEAT on the remote  
control until the REP indicator turns off on the display.  
Select “Random Off” in step 3 or press RANDOM on the remote  
control until the RNDM indicator turns off on the display.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USEFUL PLAYBACK OPERATIONS  
Playing back only the beginning  
parts of tracks (Intro Play)  
You can listen to the beginnings of the tracks for a set amount of  
time one after another.  
2
1. Press MODE to enter the playback mode setting, then  
rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to display “Intros Scan”.  
In t r o s S c a n  
L
dB  
R
–30 –10  
–6  
–2  
0
G
2. Press the MULTI JOG knob (ENTER on the remote  
control) to enter intro play setting.  
3. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to set the amount of time to play the  
beginning of each track.  
The playback time can be set in the 1 to 10 seconds range by 1  
second steps and in the 10 seconds to 60 seconds range by 5  
seconds steps.  
In t e r v a l:  
5
0
L
dB  
R
–30 –10  
–6  
–2  
G
4. Press the MULTI JOG knob (ENTER on the remote  
control) or w/d to confirm the selection.  
The unit starts intro play.  
Memo  
Intro play can be easily started by pressing INTRO on the remote  
control. In this case, the unit automatically applies the playback  
time setting adjusted last time.  
To cancel the Intro Play setting  
Press a (INTRO on the remote control).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE BOOKMARK LIST  
You can easily listen to a group of desired tracks by selecting a list of tracks with bookmarks.  
Adding tracks to the bookmark list  
Removing tracks from the book-  
mark list  
Press TRACK NO./BOOKMARK on the remote control  
during playback of the desired track until the MARK  
indicator turns on.  
Press TRACK NO./BOOKMARK on the remote control  
during playback of the desired track until the MARK  
indicator turns off.  
MARK  
G
To clear the bookmark list of the selected drive  
Press CLEAR as pressing TRACK NO./BOOKMARK on the front  
panel while this unit is in the stop mode. The following message  
appears on the display, and all bookmarks are canceled.  
Memo  
• When the track with a bookmark is selected, the MARK indicator  
lights on the display regardless of whether it is during playback or  
stopped.  
B o o k m a r k C lr  
You can create one list of the tracks with bookmarks on each the  
HDD and a CD.  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
MARK  
G
• The list of the tracks on the HDD with bookmarks will be stored  
on the HDD. However, only one list of tracks with bookmarks can  
be stored. If you wish to have more than one list, copy the playlist  
in the album (P.54).  
• The list of the tracks on a CD with bookmarks will be erased if  
the CD is taken out or the power of this unit is turned off.  
You can create a new album by copying the list of tracks with  
bookmarks. Select “Mark” as the group to be copied. See “Album  
Copy” (P.54).  
Playing back tracks in the book-  
mark list  
1. Press the MULTI JOG knob (ENTER on the remote  
control) to turn on the GROUP indicator on the  
display.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select “Mark”.  
When selecting “Mark” on a CD  
M a r k 1  
MARK  
L
TOC GROUP  
dB  
R
–30 –10  
–6  
–2  
0
CD  
When selecting “Mark” on the HDD  
M a r k 1  
G
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
MARK  
3. Press w/d to start playback.  
Tracks are played in the order that bookmarks have been  
placed.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING ON-SCREEN DISPLAY (OSD)  
You can display the list of groups or tracks to be played, copying/recording settings and the list of the setting items on the monitor by  
connecting the monitor to this unit.  
Memo  
The unit does not output video signals when “VIDEO Output” (P.74) is set to “Video Off”. To use the OSD, select “Video On”.  
2
List of groups or tracks  
Display during recording  
The numbers and titles of groups, or the numbers and titles of  
tracks are displayed. Press the MULTI JOG knob to switch the list  
displayed.  
The setting for recording are displayed.  
Rec  
Mode  
Level  
Input  
:
:
:
Track Synchro  
0.0dB  
OPTICAL  
Grp  
Tr.  
1
1
2
0:00  
Dsc 1: MY DISC  
Dsc 2: MY DISC  
Dsc 3: CLASSIC  
Alb 1: MY BEST  
Alb 2: MY BEST  
D001…  
1
0:00  
2
Mark  
:
[Bookmark]  
Example: when recording to the HDD  
List of setting items  
Grp  
1- Jazz  
2- Jazz  
3- Classic  
4- Classic  
5- Classic  
Tr.  
9
0:00  
1
2
The names of items to be set are displayed.  
1
2
3
6- Rock  
7- Rock  
8- Rock  
9- Pops  
10- Pops  
1
2
3
1
2
Album Edit  
Track Edit  
Disc Edit  
Undo  
11- Hip Hop  
HDD Utility  
Sys. Utility  
Synchro Setup  
DAC Mode  
Memo  
An asterisk (*) shown on the left of a track name indicates that the  
track has been added to the bookmark list.  
Example: when setting the menu  
Display during copying  
Display during titling  
The settings for copying are displayed.  
This is displayed while the title is being assigned to albums (P.55),  
tracks (P.65), or discs (P.69).  
Copy  
Dsc  
3
Tr.  
1
Mode  
:
:
:
:
All Synchro  
0.0dB  
Digital Copy  
Best Effort  
Level  
Method  
Speed  
A
D001…  
1
π
1
0:00  
ABCDEFGHIJKLMNOPQRSTUVWX  
YZabcdefghijklmnopqrstuv  
wxyz0123456789!"#$&%'()*  
+,-./:;<=>?@[÷]^å {|}`  
'
Example: when copying from a CD to the HDD  
Example: when titling the track  
USING HEADPHONES  
Connect your headphones to the PHONES jack and adjust the  
volume with the LEVEL control.  
NATURAL SOUND HDD/CD RECORDER  
POWER  
Note  
HDD  
CDR  
COPY  
If the power of other components such as an amplifier connected to  
this unit is not turned on, the sound of this unit may be distorted. If  
this occurs, use the headphones with the other component’s power  
turned on.  
PHONES  
LEVEL  
REC  
A.M.Q.R.  
MIN  
MAX  
LEVEL control  
PHONES jack  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM A CD ONTO THE HDD  
Memo  
Copying all tracks on a CD  
You can copy all tracks on a CD onto the HDD.  
COPY  
• In the HDD copy standby mode, you can specify the settings  
for HDD copy. For details, refer to “Setting the HDD copy  
mode” (P.28) and “Settings HDD copy menu” (P.29).  
You can specify a disc to where data is copied. For details,  
refer to “Selecting a target disc” (P.28). (When no disc is  
specified, the unit automatically selects the smallest disc  
number that does not contain any data.)  
MULTI JOG  
PUSH ENTER  
HDD/CD RECORDER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
TRACK NO. COMPLETE  
BOOKMARK  
DIGITAL REC LEVEL  
HDD  
CDR  
COPY  
REC  
H D D  
π
ALL SYNC  
C D - R W  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
L
A.M.Q.R.  
DIG  
TOC GROUP  
CD  
dB  
R
–30 –10  
–6  
–2  
0
MIN  
MAX  
w/d  
REC  
0 0 1 1 π 1  
ALL SYNC  
0 0 0  
TOC GROUP  
–6 –2  
L
dB  
R
DIG  
–30 –10  
0
CD  
ENTER  
COMPLETE  
CLEAR  
OPEN/CLOSE  
3. Press w/d to start copying.  
COPY  
A. M. Q. R. TIMER REC  
REC  
TRACK NO.  
WRITE  
The progress of the copy process is shown in the display.  
COPY  
HDD  
FINALIZE ERASE  
INPUT  
REC  
0 0 1 1 π 1  
ALL SYNC  
0 0 1  
–6 –2  
REPEAT RANDOM INTRO TEXT/TIME  
CDR  
L
dB  
R
DIG  
TOC GROUP  
CD  
–30 –10  
0
ABC  
DEF  
GHI  
1
2
3
JKL  
MNO  
PQR  
The unit applies the following settings (default) if the HDD  
copy menu settings (P.29) are never changed.  
4
5
6
W/D  
STU  
VWX  
YZ  
GROUP SKIP  
7
8
9
• Copy Method: “Digital Copy”  
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
• Copy Level:  
• Copy Speed:  
0dB  
0
MODE  
“Best Effort”  
Memo  
• It takes a few seconds for this unit to become ready to start  
copying after w/d has been pressed.  
1. Set the CD in the disc tray.  
This unit starts reading the information (type and capacity of  
the CD) when the CD is loaded.  
• This unit may create some vibration and rotation noise while  
performing the copying process by rotating a CD at high  
speed.  
The following message appears during reading (the process  
may take 10 to 20 seconds depending on the disc condition).  
To cancel copying, press a.  
When copying has been completed, the operation of  
the HDD and the CD automatically stops.  
R e a d i n g  
L
dB  
R
–30 –10  
–6  
–2  
0
CD TEXT  
When reading the information has been completed, the display  
changes as follows, and this unit becomes ready for operation.  
If the CD to be copied contains CD TEXT that can be copied,  
CD TEXT is automatically copied when the CD is copied onto  
the HDD.  
Total number of tracks  
Total time  
Output of the signals during copying  
14  
6 8 17  
L
dB  
R
TOC GROUP  
CD  
–30 –10  
–6  
–2  
0
• During copying at 1x speed, signals are output both from the  
ANALOG LINE OUT (PLAY) jack and from the DIGITAL  
OUTPUT (OPTICAL/COAXIAL) jacks.  
• During copying at 2x speed, signals are output only from the  
ANALOG LINE OUT (PLAY) jack.  
1
L
dB  
R
TOC GROUP  
CD  
–30 –10  
–6  
–2  
0
• During copying at other than 1x or 2x speed, signals are  
output neither from the ANALOG LINE OUT (PLAY) jack  
nor the DIGITAL OUTPUT (OPTICAL/COAXIAL) jacks.  
2. Press COPY once.  
The following message appears on the display, and this unit  
enters the HDD copy standby mode. Copying has not been  
started yet at this stage.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM A CD ONTO THE HDD  
4. Press w/d to start copying.  
Copying selected tracks on a CD  
The progress of the copy process is shown in the display.  
You can copy your favorite tracks on a CD onto the HDD.  
REC  
0 0 3 1 π 1  
ALL SYNC  
0 0 1  
–6 –2  
L
dB  
R
DIG  
TOC GROUP  
CD  
–30 –10  
0
COPY  
TRACK NO./BOOKMARK  
MARK  
MULTI JOG  
PUSH ENTER  
HDD/CD RECORDER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
Memo  
TRACK NO. COMPLETE  
BOOKMARK  
• It takes a few seconds for this unit to become ready to start  
copying after w/d has been pressed.  
3
DIGITAL REC LEVEL  
HDD  
CDR  
COPY  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
• This unit may create some vibration and rotation noise while  
performing the copying process by rotating a CD at high  
speed.  
A.M.Q.R.  
MIN  
MAX  
w/d  
To cancel copying, press a.  
When copying has been completed, the operation of  
the HDD and the CD automatically stops.  
ENTER  
COMPLETE  
CLEAR  
OPEN/CLOSE  
COPY  
A. M. Q. R. TIMER REC  
REC  
TRACK NO.  
WRITE  
COPY  
HDD  
CDR  
FINALIZE ERASE  
INPUT  
REPEAT RANDOM INTRO TEXT/TIME  
ABC  
DEF  
GHI  
1
2
3
JKL  
MNO  
PQR  
4
5
6
W/D  
STU  
VWX  
YZ  
GROUP SKIP  
7
8
9
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
0
BOOKMARK  
MODE  
1. Set the CD in the disc tray, then add bookmarks to  
favorite tracks (P.24).  
Tracks are listed and stored in order that the bookmarks have  
been placed.  
Memo  
The bookmark placed to the track on the CD will be canceled if  
the disc tray is open, or the power of this unit is turned off.  
2. Press COPY once.  
This unit enters the HDD copy standby mode. Copying has not  
been started yet at this stage.  
Memo  
• In the HDD copy standby mode, you can specify the settings  
for HDD copy. For details, refer to “Setting the HDD copy  
mode” (P.28) and “Settings HDD copy menu” (P.29).  
You can specify a disc to where data is copied. For details,  
refer to “Selecting a target disc” (P.28). (When no disc is  
specified, the unit automatically selects the smallest disc  
number that does not contain any data.)  
3. Press TRACK NO./BOOKMARK (BOOKMARK on the  
remote control).  
The list of the track that the bookmark is placed to is selected  
as the group to be copied (the MARK indicator lights on the  
display). Press TRACK NO./BOOKMARK (BOOKMARK on  
the remote control) again to return to the normal copy standby  
mode.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM A CD ONTO THE HDD  
Selecting a target disc  
Setting the HDD copy mode  
In the HDD copy mode, you can specify the number of tracks to be  
copied on the HDD.  
MULTI JOG  
MULTI JOG  
PUSH ENTER  
ER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
Initial setting: All Synchro  
TRACK NO. COMPLETE  
BOOKMARK  
MODE  
MULTI JOG  
DIGITAL REC LEVEL  
COPY  
MULTI JOG  
PUSH ENTER  
ER  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
TEXT/TIME  
MODE  
MENU  
A.M.Q.R.  
MIN  
MAX  
TRACK NO. COMPLETE  
BOOKMARK  
CLEAR  
DIGITAL REC LEVEL  
COPY  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
A.M.Q.R.  
COAXIAL  
ANALOG  
MIN  
MAX  
STU  
VWX  
YZ  
7
8
9
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
t/e, r/y  
0
MODE  
10  
MODE  
MENU  
ENTER  
MODE  
H, G  
COMPLETE  
CLEAR  
ENTER  
Cursor buttons, ENTER  
COMPLETE  
CLEAR  
TRACK NO.  
WRITE  
HDD  
CDR  
TRACK NO.  
WRITE  
+, –  
HDD  
+, –  
CDR  
T
,
Y
GROUP SKIP  
GROUP SKIP buttons  
GROUP SKIP  
While this unit is in the HDD copy standby mode, rotate  
the MULTI JOG knob (press +/–, GROUP SKIP buttons, H  
or G) to select the disc number to where the data is  
copied.  
1. Press MODE while this unit is in the HDD copy  
standby mode (P.26, 27).  
You can select the copying mode.  
REC  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
0 0 3 1 π 1  
ALL SYNC  
0 0 0  
–6 –2  
remote control) to select the copying mode.  
L
dB  
R
DIG  
TOC GROUP  
CD  
–30 –10  
0
Choose one of the modes listed below.  
Disc number to make the copy on  
All Synchro (All-synchronized copying mode)  
This mode copies all of the material from a single audio source  
at the same time as the source programs are being played.  
Track markers are automatically placed between the tracks  
being recorded.  
Memo  
When a disc number with recorded tracks is selected, new  
recordings will be added to the end of the last track that has been  
previously recorded.  
Multi Synchro (Multi-synchronized copying mode)  
This mode copies the set number of tracks at the same time as  
the source programs are being played. The number of tracks to  
be recorded can be set in the range of 1 to 99 tracks. This mode  
is convenient to record a mix of tracks from different sources.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM A CD ONTO THE HDD  
3. Press the MULTI JOG knob (ENTER on the remote  
Setting the HDD copy menu  
control) to confirm the copying mode selected.  
If “All Synchro” is confirmed, this unit returns to the HDD  
copy standby mode.  
In the HDD copy menu, you can set the copy method, copy level,  
and copy speed.  
If “Multi Synchro” is confirmed, the following message  
appears on the display. Go to step 4.  
MULTI JOG  
MENU  
MULTI JOG  
PUSH ENTER  
ER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
REC  
H o w m a n y  
MULT  
?
1
0
TRACK NO. COMPLETE  
BOOKMARK  
L
dB  
R
DIG  
TOC  
CD  
–30 –10  
–6  
–2  
3
SYNC  
DIGITAL REC LEVEL  
COPY  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
4. Rotate the MULTI JOG knob (press +/–, H or G on the  
MIN  
MAX  
remote control) to select the number of tracks.  
The number can be selected in the 1 to 99 tracks range.  
5. Press the MULTI JOG knob (ENTER on the remote  
10  
control) to confirm the number selected.  
MODE  
MENU  
This unit returns to the copy standby mode (P.26, 27).  
MENU  
ENTER  
6. Press t/e or r/y (T, Y,  
Q
or  
W
on the remote  
ENTER  
H, G  
control) to select the track to start copy from.  
COMPLETE  
CLEAR  
TRACK NO.  
WRITE  
To start copying all tracks from a CD, follow step 3 in  
“Copying all tracks on a CD” (P.26).  
HDD  
+, –  
CDR  
To start copying selected tracks from a CD, follow step 3  
in “Copying selected tracks on a CD” (P.27).  
GROUP SKIP  
1. Press MENU while this unit is in the HDD copy  
standby mode (P.26, 27).  
You can start setting the HDD copying menu.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select a HDD copy menu.  
The copying menu (P.30) contains three items as follows:  
• Copy Method  
• Copy Level  
• Copy Speed  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the menu item to be adjusted.  
4. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to adjust the parameter.  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the setting when adjustment has  
been completed.  
6. Press MENU to close the menu.  
This unit returns to the HDD copy standby mode (P.26, 27).  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM A CD ONTO THE HDD  
Copy Method  
Copy Speed  
Setting of the copying method. Copying may fail if the setting for  
“Copy Method” is not correctly made.  
Setting of the copying speed.  
REC  
C o p y S p e e d  
REC  
L
dB  
R
DIG  
TOC  
CD  
–30 –10  
–6  
–2  
0
C o p y M e t h o d  
ALL SYNC  
L
DIG  
TOC  
CD  
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC  
Initial setting: Best Effort  
Initial setting: Digital Copy  
Best Effort  
Digital Copy  
Copying is made at the maximum speed possible depending on the  
“Copy Method” and “Copy Level” settings.  
This method always makes digital copies. Copying is not possible if  
the tracks are copy protected by the SCMS standard (P.82).  
• When “Digital Copy” is selected:  
Max. 10x speed (2x speed when copy level is adjusted)  
Auto Dig/Anlg  
• When “Auto Dig/Anlg” is selected: 2x speed  
• When “Analog Copy” is selected: 2x speed  
Digital and analog copying are automatically switched depending  
on the track. If digital copying is prohibited by the SCMS standard  
(P.82), an analog copy is made. For those tracks that can be  
digitally copied, a digital copy is made.  
2x Copy  
Copying is always made at 2x speed.  
Analog Copy  
1x Copy  
This method always makes analog copies.  
Copying is always made at 1x speed.  
Memo  
Memo  
• In analog copying, the data may be copied at a lower sound level.  
• The setting is stored in the memory and applies to future copying.  
• If there are scratches or dust on the CD, the copy speed may drop  
automatically even when “Best Effort” is selected.  
• The setting is stored in the memory and applies to future copying.  
Copy Level  
Setting of the sound level for copying. Sound level adjustment is  
not normally necessary. However it is possible to adjust the copying  
sound level to suit you needs.  
REC  
C o p y L e v e l  
L
DIG  
TOC  
CD  
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC  
Adjustment is possible in the –12dB to +12dB range by 0.4dB  
steps.  
REC  
LEVEL  
L e v e l  
0 . 0 d B  
L
DIG  
TOC  
CD  
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC  
Memo  
• Level adjustment is not possible during copying.  
• If the red part on the peak level meter lights at the loudest sound  
levels, stop copying to adjust the copying level, and then resume  
copying.  
• If the level is adjusted, copying is made at maximum 2x speed.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD  
Recording input audio source  
You can make recordings from the component such as a cable TV tuner or DVD player connected to this unit.  
Note  
This unit cannot input digital signals other than PCM signals.  
Memo  
Recording onto the HDD is made in the unit called “disc”. The maximum length of one disc on the HDD is 179 minutes 59 seconds. If the  
recording has been made exceeding the maximum length, the recording will be made continuously to the next available disc.  
3
ENTER  
COMPLETE  
CLEAR  
OPEN/CLOSE  
w/d  
COPY  
A. M. Q. R. TIMER REC  
REC  
TRACK NO.  
WRITE  
MULTI JOG  
PUSH ENTER  
HDD/CD RECORDER  
REC  
HDD  
FINALIZE ERASE  
INPUT  
TEXT/TIME  
MODE  
MENU  
CLEAR  
TRACK NO. COMPLETE  
BOOKMARK  
INPUT  
REPEAT RANDOM INTRO TEXT/TIME  
CDR  
DIGITAL REC LEVEL  
HDD  
CDR  
COPY  
ABC  
DEF  
GHI  
ANALOG REC LEVEL  
1
2
3
INPUT  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
A
JKL  
MNO  
PQR  
MIN  
MAX  
4
5
6
W/D  
STU  
VWX  
YZ  
GROUP SKIP  
7
8
9
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
REC  
INPUT  
a
0
MODE  
1. Press REC while the HDD is selected (P.14).  
5. Start playing the source.  
The HDD mark flashes, and the disc and track numbers to be  
recorded are indicated on the display. Recording has not been  
started yet at this stage. (HDD recording standby mode)  
Press w/d to stop recording temporarily. The HDD mark  
flashes and the track number is advanced to the next.  
Press w/d to resume recording.  
REC  
D 0 0 2 1  
0 0 0  
–6 –2  
Memo  
L
dB  
R
GROUP  
–30 –10  
0
SYNC  
This unit automatically adds track markers to track data while  
recording external audio sources. To add track markers  
manually, refer to “Adding track markers during recording  
(Manual track marking)” (P.37).  
Disc number to be Track number to be recorded  
recorded  
Memo  
6. Press a to stop recording.  
• In the HDD recording standby mode, you can specify the  
settings for HDD recording. For details, refer to “Setting the  
HDD recording mode” (P.35).  
The first track number of the disc at which recording has been  
stopped is indicated on the display.  
D 0 0 2 1  
G
You can specify a disc to where data is copied. For details,  
refer to “Selecting a target disc” (P.28). (When no disc is  
specified, the unit automatically selects the smallest disc  
number that does not contain any data.)  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
IMPORTANT  
2. Select the input source to be recorded.  
• Never turn off the power of this unit during recording.  
Recording may not be correctly made, or the data on the HDD  
may be damaged.  
The lamp for the selected input (OPTICAL, COAXIAL, or  
ANALOG) lights.  
• During recording, make sure that this unit is not subjected to  
shock or vibration as the HDD may be damaged.  
3. Adjust the recording level.  
The adjustment of the digital recording level is not normally  
necessary. However it is possible to adjust the recording level  
(P.34) to suit your needs.  
4. Press w/d to start recording.  
REC  
D 0 0 2 1  
0 0 1  
–6 –2  
L
dB  
R
–30 –10  
0
SYNC  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD  
Using an external timer to record  
Notes on recording time setting  
• This unit is not equipped with the clock function. Use an external timer when making a timer recording.  
• It may take 30 seconds to 1 minute after the power of this unit is turned on by an external timer until an actual recording starts. (This length  
of time is subject to change depending on the condition.) During this time, no recording is made. Therefore set the time that is 2-minute  
earlier than the starting time of the program to be recorded for turning on this unit.  
• As a characteristic of an HDD recorder, it is necessary to store information to control audio data as well as audio data itself. This informa-  
tion is normally recorded when recording is stopped. Therefore if the power of this unit is turned off before recording is stopped, no  
information to control audio data and no audio data are stored. Set the time that is longer than 3-minute after the program to be recorded  
finishes for turning off this unit by an external timer.  
• Set the time that is 2-minute longer than actual recording time for the total recording time.  
Following chart indicates the time flow when this unit makes timer recordings.  
Time to be set on the external timer  
(2 minutes + recording time + 3 minutes or longer)  
Recording time to be set on the CDR-HD1500  
(Recording time + 2 minutes)  
Recording time  
Program starting time  
CDR-HD1500 starts recording  
(30 seconds to 1 minute after the  
external timer turns on.)  
Program ending time  
External timer turns off  
External timer turns on  
CDR-HD1500 finishes  
recording  
Time flow  
Example:To record the program that starts at 9:00 and ends at 10:00.  
• Set the external timer to be turned on at 8:58.  
• Set the external timer to be turned off after 10:03.  
• Set 1 hour 2 minutes for the total recording time on this unit.  
Memo  
• Actual recorded material includes a little more than the set amount of time at both beginning and end of the recording. Delete unnecessary  
parts using the editing operation.  
• Recording will be stopped if copy protected digital signals are input while timer recording is being made.  
• If you set the total recording time over 179 minutes 59 seconds, recording will be made extending several discs. To play the recorded  
materials sequentially, select “Style All” as the play style (P.20).  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD  
Setting for a timer recording  
Memo  
You cannot set a timer recording for CD-R and CD-RW copying.  
You can skip to step 3 in the following procedure by pressing TIMER REC on the remote control.  
COPY  
A. M. Q. R. TIMER REC  
REC  
REC  
FINALIZE ERASE  
INPUT  
3
REPEAT RANDOM INTRO TEXT/TIME  
ABC  
DEF  
GHI  
1
2
3
JKL  
MNO  
PQR  
MULTI JOG  
4
5
6
STU  
VWX  
YZ  
MULTI JOG  
PUSH ENTER  
URAL SOUND HDD/CD RECORDER  
7
8
9
TEXT/TIME  
MODE  
MENU  
CLEAR  
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
TRACK NO. COMPLETE  
BOOKMARK  
0
DIGITAL REC LEVEL  
MODE  
HDD  
CDR  
COPY  
L
ANALOG REC LEVEL  
INPUT  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
MAX  
MIN  
MAX  
ENTER  
Cursor buttons, ENTER  
COMPLETE  
CLEAR  
REC t/e, r/y  
TRACK NO.  
WRITE  
HDD  
CDR  
+, –  
E, R  
1. Carry out steps 1 and 2 in “Recording input audio  
5. Leave the power of this unit on. Turn off the power  
source” (P.31).  
of this unit by the external timer.  
For the HDD recording mode (P.35), select one of “Manual”  
(manual recording), “Track Synchro” (track-synchronized  
recording) or “Auto Period” (auto-period recording). Other  
modes cannot be selected when timer recording is made.  
If the power of this unit is turned on by the external timer,  
“Timer Standby” flashes for approximately five seconds. Then  
recording starts according to the setting.  
Memo  
2. Press and hold REC for approximately three seconds  
Once timer recording is set, recording starts every time the power of  
this unit is turned on. To cancel the setting, press a while “Timer  
Standby” is flashing, or while recording is being made.  
(press TIMER REC on the remote control).  
The following screen appears in the display.  
REC  
T . S p a n  
1h 2 m  
L
dB  
R
–30 –10  
–6  
–2  
0
SYNC  
TIME  
3. Press t/e or r/y (press E, R,  
Q
or  
W
on the  
remote control) to switch between hour and minute,  
then rotate the MULTI JOG knob (press +/–, H or G on  
the remote control) to adjust the total recording time.  
4. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the total time of timer recording.  
“Timer Standby” appears on the display.  
T i m e r S t a n d b y  
L
dB  
R
–30 –10  
–6  
–2  
0
G
To cancel timer recording setting, press a.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD  
Adjusting the recording level  
There is an adjusting procedure for each input source to be recorded as explained below. Choose the one for your input source and follow the  
steps.  
10  
MODE  
MENU  
MENU  
ENTER  
MULTI JOG  
MENU  
H, G  
ENTER  
COMPLETE  
CLEAR  
MULTI JOG  
PUSH ENTER  
ER  
TEXT/TIME  
MODE  
MENU  
TRACK NO.  
WRITE  
TRACK NO. COMPLETE  
BOOKMARK  
CLEAR  
HDD  
DIGITAL REC LEVEL  
+, –  
COPY  
CDR  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
MIN  
MAX  
ANALOG REC LEVEL  
GROUP SKIP  
Memo  
When recording a digital input source  
(OPTICAL, COAXIAL)  
The digital recording level is set to 0dB, the level of the input  
source, as an initial setting. Further adjustment is not normally  
necessary. However it is possible to adjust the recording level to  
suit your needs.  
• The recording level can be adjusted while this unit is in either the  
recording or recording standby mode. Once recording has been  
stopped, the recording level is reset to 0dB.  
• Adjustment of the recording level can be canceled by pressing  
MENU when the level is adjusted in the recording standby mode.  
• The recording level is set to 0dB by pressing CLEAR when the  
level is adjusted in the recording standby mode.  
1. Press MENU while this unit is in the HDD recording  
standby mode (P.31).  
The following screen appears on the display.  
When recording an analog input source  
(ANALOG)  
REC  
LEVEL  
L e v e l  
0 . 0 d B  
L
dB  
R
–30 –10  
–6  
–2  
0
1. Play the loudest passage (highest sound level) of the  
SYNC  
source to be recorded.  
2. Play the loudest passage (highest sound level) of the  
2. Adjust the recording level by rotating the ANALOG  
source to be recorded.  
REC LEVEL control.  
Rotate the control clockwise to increase the level and  
counterclockwise to decrease the level.  
3. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to adjust the recording level.  
Adjust the recording level so that the red part on the peak level  
meter does not light at the loudest sound levels.  
Memo  
The recording level can be adjusted while this unit is in either the  
recording or recording standby mode.  
Adjustment is possible in the –12dB to +12dB range by 0.4dB  
steps.  
Adjust the recording level so that the red part on the peak level  
meter does not light at the loudest sound levels.  
4. Press the MULTI JOG knob (ENTER on the remote  
control) to return to the previous display.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD  
3. Press the MULTI JOG knob (ENTER on the remote  
Setting the HDD recording mode  
control) to confirm the recording mode selected.  
If “Manual”, “Track Synchro” or “All Synchro” is confirmed,  
this unit returns the HDD recording standby mode.  
This unit provides various recording modes. Choose the mode that  
suits your needs.  
If “Multi Synchro” is confirmed, following message appears on  
the display. Follow the “When Multi Synchro is selected”  
procedure below.  
Initial setting: Track Synchro  
MODE MULTI JOG  
MULTI JOG  
ER  
PUSH ENTER  
TEXT/TIME  
MODE  
MENU  
REC  
3
H o w m a n y  
SYNC  
?
1
0
TRACK NO. COMPLETE  
BOOKMARK  
CLEAR  
L
dB  
R
–30 –10  
–6  
–2  
MULT  
DIGITAL REC LEVEL  
COPY  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
If “Auto Period” is confirmed, following message appears on  
the display. Follow the “When Auto Period is selected”  
procedure below.  
A.M.Q.R.  
MIN  
MAX  
t/e, r/y  
REC  
P e r i o d  
?
3 0 0  
–30 –10 –6 –2  
L
dB  
R
AUTO PRD  
10  
0
TIME  
MODE  
MENU  
MODE  
(When Multi Synchro is selected)  
ENTER  
Cursor buttons, ENTER  
4. Rotate the MULTI JOG knob (press +/–, H or G on the  
COMPLETE  
CLEAR  
remote control) to specify the number of tracks.  
TRACK NO.  
WRITE  
The number can be set in the 1 to 99 tracks range.  
HDD  
+, –  
5. Press the MULTI JOG knob (ENTER on the remote  
CDR  
control) to confirm the number of tracks to be set.  
This unit returns to the HDD recording standby mode (P.31, 33).  
E, R  
(When Auto Period is selected)  
4. Press t/e or r/y (press E, R,  
Q
or  
W
on the  
1. Press MODE while this unit is in the HDD recording  
remote control) to switch between hour and minute,  
then rotate the MULTI JOG knob (press +/–, H or G on  
the remote control) to adjust the time length between  
track markers.  
standby mode (P.31, 33).  
The recording mode can be selected.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select the HDD recording mode.  
The time length can be set in the 10 seconds to 30 minutes  
range by 10-seconds steps.  
Choose one of the modes listed below.  
5. Press the MULTI JOG knob (ENTER on the remote  
Manual (Manual recording mode)  
control) to confirm the setting.  
All the recording operations including starting, stopping and  
track marking are performed manually.  
The following screen appears on the display.  
Track Synchro (Track-synchronized recording mode)  
REC  
T o t a l  
?
0 h 4 m  
Starting and stopping are performed manually. Track markers  
are automatically placed between the tracks being recorded.  
L
AUTO PRD  
dB  
R
–30 –10  
–6  
–2  
0
TIME  
Multi Synchro (Multi-synchronized recording mode)  
6. Press t/e or r/y (press E, R,  
Q
or  
W
on the  
This mode records the set number of tracks at the same time as  
the source programs are being played. The number of tracks to  
be recorded can be set in the range of 1 to 99 tracks. This mode  
is convenient to record a mix of tracks from different sources.  
remote control) to switch between hour and minute,  
then rotate the MULTI JOG knob (press +/–, H or G on  
the remote control) to adjust the total recording time.  
7. Press the MULTI JOG knob (ENTER on the remote  
All Synchro (All-synchronized recording mode)  
control) to confirm the total recording time.  
This mode records all of the material from a single audio  
source at the same time as the source programs are being  
played. Track markers are automatically placed between the  
tracks being recorded.  
This unit returns to the HDD recording standby mode (P.31, 33)  
.
Memo  
• When recording to the HDD in the auto period recording mode,  
the recording will be performed continuously to the next available  
disc if the time length between selected track markers exceeds the  
group remaining time.  
Auto Period (Auto-period recording mode)  
This mode makes recording for the set amount of time while  
placing track markers at the set time interval. The length  
between track markers can be adjusted in the 10 seconds to 30  
minutes range by 10-second steps. This mode is convenient to  
search for material recorded from FM broadcasts.  
• In the auto period recording mode, a time error can occur in a  
frame unit. Therefore, the time of each track or the group total  
time may not match the confirmed time length between selected  
track markers or the total recording time.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD  
Int.Time  
Setting a condition for synchronized  
recording  
This unit automatically detects track intervals when recording is  
made in track-synchronized recording mode, multi-synchronized  
recording mode, or all-synchronized recording mode. You can set  
the condition for detecting track intervals. Setting items are as  
follows.  
Sets the length of silence (“no signal”) that judges track intervals.  
When the set amount of silence continues, this unit judges it as a  
track interval and places a track marker.  
Initial setting: 2.0 seconds, Control range: 0.5 to 5.0 seconds  
End Duration  
Sets the length of silence (“no signal”) that judges the end of  
playback when recording in the all-synchronized recording mode.  
When the set amount of silence continues, recording will be  
stopped.  
MULTI JOG  
MENU  
MULTI JOG  
PUSH ENTER  
ER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
TRACK NO. COMPLETE  
BOOKMARK  
Initial setting: 12.0 seconds, Control range: 2.0 to 60.0 seconds  
DIGITAL REC LEVEL  
COPY  
Memo  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
• If you set a TH (threshold) level, a signal less than the specified  
TH level is not input through the jack (considered as “no signal”).  
MIN  
MAX  
• Settings for “Int. Time” and “End Duration” apply to each input  
jack.  
10  
MODE  
MENU  
5. Press the MULTI JOG knob (ENTER on the remote  
MENU  
ENTER  
control) to confirm the setting item.  
ENTER  
H, G  
If “OPT TH Level”, “COAX TH Level” or “ANLG TH Level”  
is confirmed, follow the “When OPT TH Level, COAX TH  
Level, or ANLG TH Level is selected” procedure below.  
COMPLETE  
CLEAR  
TRACK NO.  
WRITE  
If “Int. Time” or “End Duration” is confirmed, follow the  
HDD  
“When Int. Time or End Duration is selected” procedure below.  
+, –  
CDR  
(When OPT TH Level, COAX TH Level, or ANLG TH Level  
is selected)  
6. Rotate the MULTI JOG knob (press +/–, H or G on the  
1. Press MENU while this unit is in the stop mode.  
remote control) to adjust the level.  
Menu item selection appears on the display.  
Level can be set by 1dB step.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
Example: To set “ANLG TH Level”  
remote control) to select “Synchro Setup”.  
LEVEL  
A N L G T H - 4 0 d B  
S y n c h r o S e t u p  
L
dB  
R
–30 –10  
–6  
–2  
0
L
dB  
R
–30 –10  
–6  
–2  
0
7. Press the MULTI JOG knob (ENTER on the remote  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the level.  
control).  
Setting item selection appears on the display.  
Setting item selection appears on the display.  
(When Int.Time or End Duration is selected)  
4. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select a setting item.  
6. Rotate the MULTI JOG knob (+/–, H or G on the  
remote control) to set an interval.  
OPT TH Level  
“Int. Time” can be set by 0.5-second steps, and “End Duration”  
can be set by 1.0-second steps.  
Sets the signal level that judges the signals input through the  
DIGITAL IN (OPTICAL) jack as “no signal”.  
Example: To set “Int.Time”  
Initial setting: –50dB, Control range: –90 to –20dB  
COAX TH Level  
T i m e  
2 . 0 s e c  
L
Sets the signal level that judges the signals input through the  
DIGITAL IN (COAXIAL) jack as “no signal”.  
dB  
R
–30 –10  
–6  
–2  
0
TIME  
Initial setting: –50dB, Control range: –90 to –20dB  
7. Press the MULTI JOG knob (ENTER on the remote  
control) to set an interval.  
ANLG TH Level  
Setting item selection appears on the display.  
Sets the signal level that judges the signals input through the  
ANALOG LINE IN (REC) jacks as “no signal”.  
Press MENU twice to close the menu and return to the normal stop  
mode.  
Initial setting: –40dB, Control range: –60 to –20dB  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD  
Adding track markers during recording (Manual track marking)  
10  
MODE  
MENU  
ENTER  
TRACK NO./BOOKMARK  
COMPLETE  
CLEAR  
MULTI JOG  
PUSH ENTER  
ER  
3
TEXT/TIME  
MODE  
MENU  
CLEAR  
TRACK NO.  
WRITE  
HDD  
TRACK NO. COMPLETE  
BOOKMARK  
TRACK NO.  
WRITE  
DIGITAL REC LEVEL  
COPY  
CDR  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
MIN  
MAX  
GROUP SKIP  
This unit can automatically place track markers. However you can  
also manually place track markers during recording. (Manual track  
marking)  
Memo  
• The track markers may not be placed properly even if the  
recording has been performed in the synchronized recording  
according to the type of the source devices. To avoid this  
problem, place the track markers manually.  
Press TRACK NO./BOOKMARK (TRACK NO. WRITE on  
the remote control) during your recording.  
• Manual track marking is possible even during synchronized  
recording.  
• A new track number is added at the location on the disc  
corresponding to the time TRACK NO./BOOKMARK (TRACK  
NO. WRITE on the remote control) is pressed.  
You can place the track markers to the tracks that have been  
recorded on the HDD by dividing the track. For details, refer to  
“Track Divide” (P.62).  
• Manual track marking is possible after the recording has been  
performed for 5 seconds from the beginning of the track, and a  
disc cannot contain more than 99 tracks. Even if there is time  
remaining on the disc, further recording is impossible once 99  
track markers have been placed.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC  
Copying all tracks in a group to a disc  
You can copy all tracks in a whole group of discs, albums or bookmark list.  
MODE  
MENU  
OPEN/CLOSE  
ENTER  
H, G  
COPY  
MULTI JOG  
COPY  
A. M. Q. R. TIMER REC  
REC  
COMPLETE  
CLEAR  
COPY  
MULTI JOG  
PUSH ENTER  
RECORDER  
FINALIZE ERASE  
INPUT  
TEXT/TIME  
MODE  
MENU  
CLEAR  
TRACK NO.  
WRITE  
FINALIZE  
TRACK NO. COMPLETE  
BOOKMARK  
REPEAT RANDOM INTRO TEXT/TIME  
HDD  
DIGITAL REC LEVEL  
ABC  
DEF  
GHI  
CDR  
COPY  
CDR  
1
2
3
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
JKL  
MNO  
PQR  
+, –  
MIN  
MAX  
4
5
6
STU  
VWX  
YZ  
7
8
9
W/D  
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
FINALIZE w/d  
GROUP SKIP  
0
MODE  
GROUP SKIP buttons  
1. Set a new or not finalized CD-R (or CD-RW) disc in  
2. Press COPY twice.  
the disc tray.  
The following message appears on the display, and this unit  
enters in the CDR copy standby mode. Copying has not been  
started yet at this stage.  
This unit starts reading the information (type and capacity of a  
CD-R or a CD-RW disc) when a CD-R or a CD-RW disc is  
loaded.  
Memo  
The following message appears during reading (the process  
may take 10 to 20 seconds depending on the disc condition).  
In the CDR copy standby mode, you can specify the settings  
for disc copy. For details, refer to “Setting the CDR copy  
mode” (P.42) and “Setting the CDR copy menu” (P.43).  
R e a d i n g  
L
dB  
R
–30 –10  
–6  
–2  
0
REC  
H D D  
C D - R W  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC ANLG  
CDR  
When reading the information has been completed, the display  
changes as follows, and this unit becomes ready for operation.  
When copying onto a CD-R or CD-RW disc without  
finalization  
REC  
0 0 3 1 1  
ALL SYNC ANLG  
0 0 0  
–6 –2  
The number of recorded tracks Total recorded time  
L
dB  
R
GROUP  
–30 –10  
0
CDR  
14  
1
6 8 17  
–30 –10 –6 –2 0  
L
dB  
R
GROUP  
3. Rotate the MULTI JOG knob (press +/–, GROUP SKIP  
buttons, H or G on the remote control) to select a  
group to be copied onto the disc.  
CDR  
The following screen appears on the display depending on the  
type of group you selected.  
L
dB  
R
GROUP  
Memo  
–30 –10  
–6  
–2  
0
CDR  
You can create a CD with high quality sounds using the Audio  
Master Quality Recording feature. For details, refer to  
“Copying high quality sounds (Audio Master Quality  
Recording)” (P.41).  
When copying onto a new CD-R or CD-RW disc  
N e w D i s c  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
CDR  
0
L
dB  
R
GROUP  
–30 –10  
–6  
–2  
0
CDR  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC  
Notes  
When a disc is selected:  
• If copying is canceled by pressing a, only the data that has  
been recorded on the CD-R or CD-RW disc before the  
cancellation remains on the disc. When “Digital Move”  
(P.43) is selected, the original data on the HDD that have  
already been copied to a CD-R or CD-RW disc will be  
deleted.  
REC  
0 0 3 1 1  
ALL SYNC ANLG  
0 0 0  
–6 –2  
L
dB  
R
GROUP  
–30 –10  
0
CDR  
CDR  
CDR  
When an album is selected:  
REC  
• CD TEXT is copied only when selecting “Full Auto” in the  
CDR copy mode for a new CD-R or CD-RW disc.  
0 0 3 1 1  
ALL SYNC ANLG  
0 0 0  
–6 –2  
L
dB  
R
ALBM  
GROUP  
–30 –10  
0
REC  
R e c o r d i n g  
1%  
–2  
When a bookmark is selected:  
L
AUTO  
SYNC ANLG  
GROUP  
dB  
R
–30 –10  
–6  
0
MARK  
CDR  
4
REC  
M r k 1 1  
ALL SYNC ANLG  
0 0 0  
–6 –2  
• When the Audio Master Quality Recording is set or the  
message “Recording” appears on the display, you cannot  
cancel the copy process by pressing a.  
L
GROUP  
dB  
R
–30 –10  
0
MARK  
4. Press w/d to start copying.  
When copying has been completed, the operation of  
the HDD and the CD automatically stops.  
The progress of the copy process is shown in the display.  
REC  
5. To carry out the finalization process (P.47), press  
0 0 3 1 1  
ALL SYNC ANLG  
0 0 1  
–6 –2  
L
dB  
R
GROUP  
FINALIZE.  
–30 –10  
0
CDR  
The unit applies the following settings (default) if the CDR  
copy menu settings (P.43) are never changed.  
• Copy Method: “Digital Copy”  
• Copy Level:  
0dB  
• Copy Speed: “Best Effort”  
Memo  
• The OPC (Optimum Power Control) feature may start  
automatically depending on disc conditions. In this case, the  
message “OPC Adjust” appears on the display until the  
adjustment is done (about 10 seconds) before the copy  
process starts.  
• The progress of elapsed time for the track being copied may  
vary by the data processing inside this unit.  
To cancel copying, press a.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC  
Copying selected tracks on the HDD  
You can copy favorite tracks on the HDD to a CD-R or CD-RW disc.  
MODE  
MENU  
OPEN/CLOSE  
ENTER  
H, G  
COPY  
A. M. Q. R. TIMER REC  
REC  
COPY  
MULTI JOG  
COMPLETE  
CLEAR  
COPY  
FINALIZE ERASE  
INPUT  
MULTI JOG  
PUSH ENTER  
RECORDER  
TRACK NO.  
WRITE  
FINALIZE  
TEXT/TIME  
MODE  
MENU  
CLEAR  
REPEAT RANDOM INTRO TEXT/TIME  
HDD  
TRACK NO. COMPLETE  
BOOKMARK  
ABC  
DEF  
GHI  
DIGITAL REC LEVEL  
CDR  
1
2
3
CDR  
COPY  
INPUT  
ANALOG REC LEVEL  
JKL  
MNO  
PQR  
+, –  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
4
5
6
MIN  
MAX  
STU  
VWX  
YZ  
7
8
9
W/D  
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
GROUP SKIP  
0
FINALIZE w/d  
MODE  
GROUP SKIP buttons  
1. Set a new or not finalized CD-R (or CD-RW) disc in  
the disc tray, then select the HDD and add book-  
marks to favorite tracks (P.24).  
Memo  
The OPC (Optimum Power Control) feature may start  
automatically depending on disc conditions. In this case, the  
message “OPC Adjust” appears on the display until the  
adjustment is done (about 10 seconds) before the copy process  
starts.  
Tracks are listed and stored in order that the bookmarks have  
been placed.  
2. Press COPY twice.  
This unit enters the CDR copy standby mode. Copying has not  
been started yet at this stage.  
Note  
CD TEXT is copied only when selecting “Full Auto” in the  
CDR copy mode for a new CD-R or CD-RW disc.  
Memo  
In the CDR copy standby mode, you can specify the settings  
for disc copy. For details, refer to “Setting the CDR copy  
mode” (P.42) and “Setting the CDR copy menu” (P.43).  
REC  
R e c o r d i n g  
1%  
–2  
L
AUTO  
SYNC ANLG  
GROUP  
dB  
R
–30 –10  
–6  
0
MARK  
CDR  
3. Rotate the MULTI JOG knob (press +/–, GROUP SKIP  
buttons, H or G on the remote control) to select  
“Mrk”.  
When copying has been completed, the operation of  
the HDD and the CD automatically stops.  
5. To carry out the finalization process (P.47), press  
Memo  
FINALIZE.  
You can create a CD with high quality sounds using the Audio  
Master Quality Recording feature. For details, refer to  
“Copying high quality sounds (Audio Master Quality  
Recording)” (P.41).  
REC  
M r k 1 1  
ALL SYNC ANLG  
0 0 0  
–6 –2  
L
dB  
R
GROUP  
–30 –10  
0
MARK  
CDR  
4. Press w/d to start copying  
The progress of the copy process is shown in the display.  
REC  
M r k 1 1  
ALL SYNC ANLG  
0 0 1  
–6 –2  
L
dB  
R
GROUP  
–30 –10  
0
MARK  
CDR  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC  
Copying high quality sounds (Audio Master Quality Recording)  
You can make your own CD with high quality sound with the Audio Master Quality Recording feature.  
Notes  
• Audio Master Quality Recording can be used only for copying from the HDD on a new CD-R disc.  
• Recordable time is 63 minutes for a 74-minute CD-R disc, and 68 minutes for a 79-minute CD-R disc.  
• Since “Digital Move” is automatically selected for “Copy Method” (P.43), the group or track data copied to a CD-R disc will be erased  
after copying.  
ENTER  
4
COMPLETE  
CLEAR  
OPEN/CLOSE  
COPY  
A. M. Q. R. TIMER REC  
REC  
MULTI JOG  
PUSH ENTER  
HDD/CD RECORDER  
TRACK NO.  
WRITE  
TEXT/TIME  
MODE  
MENU  
CLEAR  
HDD  
A.M.Q.R.  
FINALIZE ERASE  
INPUT  
TRACK NO. COMPLETE  
BOOKMARK  
DIGITAL REC LEVEL  
REPEAT RANDOM INTRO TEXT/TIME  
CDR  
HDD  
CDR  
COPY  
ABC  
DEF  
GHI  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
1
2
3
MIN  
MAX  
JKL  
MNO  
PQR  
4
5
6
W/D  
STU  
VWX  
YZ  
GROUP SKIP  
7
8
9
w/d  
A.M.Q.R.  
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
0
MODE  
1. Press A.M.Q.R. while the unit is in the CDR copy  
Notes  
• When total time of the group to be copied exceeds recordable  
time on a CD-R disc (63 minutes for a 74-minute CD-R disc and  
68 minutes for an 79-minute CD-R disc), the following message  
appears on the display. In this case, Audio Master Quality  
Recording cannot be used.  
standby mode (P.40, 42).  
The A.M.Q.R. indicator lights up on the display.  
A.M.Q.R.  
2. Press w/d to start copying.  
REC  
N o E n o u g h S p c  
L
A.M.Q.R.AUTO  
DIGM  
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
REC  
SYNC  
CDR  
A M Q R  
1%  
–2  
L
dB  
R
A.M.Q.R.AUTO  
SYNC  
DIGM  
GROUP  
–30 –10  
–6  
0
CDR  
• If you select the album with its tracks’ level adjusted as the group  
to be copied, the following message appears on the display. In this  
case, Audio Master Quality Recording cannot be used.  
The copying conditions are as follows:  
• Copy Method: “Digital Move”  
REC  
• Copy Level:  
• Copy Speed:  
0dB  
C a n ' t T r . L e v .  
L
A.M.Q.R.AUTO  
DIGM  
GROUP  
Best Effort  
dB  
R
–30 –10  
–6  
–2  
0
SYNC  
CDR  
Notes  
• When a CD-R disc other than a 74-minute, 79-minute or 4x  
writing compatible CD-R disc is loaded, or a CD-RW disc is  
loaded on this unit, the following message appears on the display.  
In this case, Audio Master Quality Recording cannot be used.  
• Once copying starts, no button operation is effective until  
copying is completed.  
• Never turn off the power of this unit or unplug the AC power  
cord during copying.  
REC  
When copying has been completed, the operation of  
the HDD and the CD automatically stops.  
U n a v a i la b le  
L
A.M.Q.R.AUTO  
DIGM  
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
SYNC  
CDR  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC  
Setting the CDR copy mode  
In the CDR copy mode, you can specify the number of tracks to be copied on the HDD or enable/disable the auto-finalization feature.  
Initial setting: All Synchro  
10  
MODE  
MENU  
MODE  
MULTI JOG  
MODE  
MULTI JOG  
PUSH ENTER  
ER  
TEXT/TIME  
MODE  
MENU  
ENTER  
H, G  
ENTER  
TRACK NO. COMPLETE  
BOOKMARK  
CLEAR  
COMPLETE  
CLEAR  
DIGITAL REC LEVEL  
COPY  
TRACK NO.  
WRITE  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
HDD  
A.M.Q.R.  
MIN  
MAX  
+, –  
CDR  
1. Press MODE while this unit is in the CDR copy  
4. Rotate the MULTI JOG knob (press +/–, H or G on the  
standby mode (P.38, 40).  
remote control) to select the number of tracks.  
The number can be selected in the 1 to 99 tracks range.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select the CDR copy mode.  
5. Press the MULTI JOG knob (ENTER on the remote  
Choose one of the modes listed below.  
control) to confirm the number selected.  
This unit returns to the CDR copy standby mode (P.38, 40).  
All Synchro (All-synchronized copying mode)  
This mode copies all of the material from a single audio source  
at the same time as the source programs are being played.  
Track markers are automatically placed between the tracks  
being recorded.  
6. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select the group and track to start  
copy from.  
While the GROUP indicator lights, you can select a group, and  
while the TRACK indicator lights, you can select a track. For  
details, refer to “SELECTING THE GROUP OR TRACK  
MODE” (P.15).  
Full Auto (Full auto-synchronized copying mode)  
This mode automatically performs finalization after all  
synchronized copying is complete. A CD-R disc can be played  
as a CD as soon as finalization has been completed.  
To start copying all tracks from a group, follow step 3 in  
“Copying all tracks in a group to a disc” (P.38).  
Note  
To start copying selected tracks from the HDD, follow  
step 3 in “Copying selected tracks on the HDD” (P.40).  
CD TEXT is copied only when selecting “Full Auto” in the  
CDR copy mode for a new CD-R or CD-RW disc.  
Multi Synchro (Multi-synchronized copying mode)  
This mode copies the set number of tracks at the same time as  
the source programs are being played. The number of tracks to  
be recorded can be set in the range of 1 to 99 tracks. This mode  
is convenient to record a mix of tracks from different sources.  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the CDR copy mode selected.  
If “All Synchro” or “Full Auto” is confirmed, this unit returns  
to the CDR copy standby mode.  
If “Multi Synchro” is confirmed, the following message  
appears on the display. Go to step 4.  
REC  
H o w m a n y  
MULT  
?
1
0
L
dB  
R
–30 –10  
–6  
–2  
SYNC ANLG  
CDR  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC  
Copy Method  
Setting of the copying method. Copying may fail if the setting for  
“Copy Method” is not correctly made.  
Setting the CDR copy menu  
In the CDR copy menu, you can set the copy method, copy level,  
copy speed, and imaging speed.  
REC  
C o p y M e t h o d  
MULTI JOG  
MENU  
L
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC ANLG  
CDR  
MULTI JOG  
PUSH ENTER  
ER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
Initial setting: Analog Copy  
TRACK NO. COMPLETE  
BOOKMARK  
DIGITAL REC LEVEL  
Analog Copy  
COPY  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
This method always makes analog copies.  
A.M.Q.R.  
MIN  
MAX  
4
Digital Move  
The data is moved from the HDD to the CD. Therefore, the track or  
group data will be deleted from the HDD after they have been  
moved to the CD-R or CD-RW disc by this method.  
10  
MODE  
MENU  
MENU  
ENTER  
Digital Copy  
ENTER  
H, G  
This method always makes digital copies. Copying is not possible if  
the tracks are copy protected by the SCMS standard (P.82).  
COMPLETE  
CLEAR  
Auto Dig/Anlg  
TRACK NO.  
WRITE  
HDD  
Digital and analog copying are automatically switched depending  
on the track. If digital copying is prohibited by the SCMS standard  
(P.82), an analog copy is made. For those tracks that can be  
digitally copied, a digital copy is made.  
+, –  
CDR  
Memo  
1. Press MENU while this unit is in the CDR copy  
• In analog copying, the data may be copied at a lower sound level.  
standby mode (P.38, 40).  
• The settings is stored in the memory and applied to future  
copying.  
2. In the HDD copy menu, you can set the copy method,  
copy level, copy speed, and imaging speed.  
• When copy level is adjusted or when carrying out Analog Copy,  
the unit automatically creates an image file on the HDD before  
starting the disc copy process.  
The copying menu (P.43-44) contains four items as follows:  
• Copy Method  
• Copy Level  
• Copy Speed  
• Imaging Speed  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the menu item to be adjusted.  
4. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to adjust the parameter for each item.  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the setting when adjustment has  
been completed.  
6. Press MENU to close the menu.  
This unit returns to the CDR copy standby mode (P.38, 40).  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC  
Copy Level  
Copy Speed  
Setting of the sound level for copying. Sound level adjustment is  
not normally necessary. However it is possible to adjust the copying  
sound level to suit you needs.  
Setting of the copying speed.  
REC  
C o p y S p e e d  
L
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC ANLG  
CDR  
REC  
C o p y L e v e l  
L
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC ANLG  
CDR  
Initial setting: Best Effort  
Best Effort  
Adjustment is possible in the –12dB to +12dB range by 0.4dB  
steps.  
Copying is made at Max. 8x speed for a CD-R disc and 4x speed  
for a CD-RW disc.  
REC  
LEVEL  
L e v e l  
0 . 0 d B  
4x Copy  
L
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC ANLG  
CDR  
Copying is always made at 4x speed.  
Memo  
Memo  
• Level adjustment is not possible during copying.  
• Depending on the condition of the CD-R disc, the copy speed  
may drop automatically even when “Best Effort” is selected.  
• If the red part on the peak level meter lights at the loudest sound  
levels, stop copying to adjust the copying level, and then resume  
copying.  
• When “Analog Copy” or “Auto Dig/Anlg” is selected in “Copy  
Method” (P.43), the unit automatically creates an image file on  
the HDD with 1x or 2x speed before starting the disc copy  
process.  
• When copy level is adjusted, the unit automatically creates an  
image file on the HDD with 1x or 2x speed before starting the  
disc copy process.  
• The settings is stored in the memory and applied to future  
copying.  
Imaging Speed  
When copy level is adjusted or when carrying out an analog copy,  
the unit automatically creates an image file on the HDD before  
starting the disc copy process. By this setting, you can select 2x or  
1x speed applied for an image file creation process.  
REC  
Im a g i n g S p e e d  
L
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC ANLG  
CDR  
Initial setting: 2x  
2x  
An image file is made at 2x speed.  
1x  
An image file is made at 1x speed.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DUPLICATING A CD  
This unit equips the Duplicate feature that enables to create a copy CD easily and quickly.  
Note  
Duplication may not correctly made on a CD-R or CD-RW disc that does not support high speed writing. In this case, copy a CD onto the  
HDD first, then perform “Digital Move” on a CD-R or CD-RW disc at 4x speed.  
ENTER  
COMPLETE  
CLEAR  
OPEN/CLOSE  
COPY  
A. M. Q. R. TIMER REC  
REC  
TRACK NO.  
WRITE  
w/d  
COPY  
COPY  
HDD  
FINALIZE ERASE  
INPUT  
MULTI JOG  
PUSH ENTER  
HDD/CD RECORDER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
REPEAT RANDOM INTRO TEXT/TIME  
CDR  
4
TRACK NO. COMPLETE  
BOOKMARK  
ABC  
DEF  
GHI  
DIGITAL REC LEVEL  
1
2
3
HDD  
CDR  
COPY  
JKL  
MNO  
PQR  
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
4
5
6
A.M.Q.R.  
W/D  
MIN  
MAX  
STU  
VWX  
YZ  
GROUP SKIP  
7
8
9
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
0
MODE  
1. Set the original CD in the disc tray.  
3. Press w/d to start copying from the CD onto the HDD.  
The copying conditions are as follows:  
This unit starts reading the information (type and capacity of a  
CD) when a CD is loaded.  
• Copy Method: “Digital Copy”  
The following message appears during reading (the process  
may take 10 to 20 seconds depending on the disc condition).  
• Copy Level:  
• Copy Speed:  
0dB  
“Best Effort”  
R e a d i n g  
Notes  
L
dB  
R
–30 –10  
–6  
–2  
0
• If copying is canceled by a being pressed, even the data that  
has been copied before cancellation does not remain on the  
HDD.  
When reading the information has been completed, the display  
changes as follows, and this unit becomes ready for operation.  
• If a track is copy protected by the SCMS standard (P.82), that  
track cannot be copied onto the HDD.  
Total number of tracks Total time  
When copying from the CD onto the HDD has been  
completed, the following message appears on the  
display.  
14  
6 8 17  
–30 –10 –6 –2 0  
L
dB  
R
TOC GROUP  
CD  
REC  
C h a n g e D i s c s !  
L
DUPLCT  
DIG  
TOC  
CD  
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC  
1
L
dB  
R
TOC GROUP  
CD  
–30 –10  
–6  
–2  
0
4. Set a new CD-R or CD-RW disc in the disc tray.  
The unit starts to read the disc information, then starts copying  
track data from the HDD to a CD-R or CD-RW disc.  
2. Press COPY three times.  
The following message appears on the display, and this unit  
enters the duplicate standby mode. Duplication has not been  
started yet at this stage.  
REC  
D u p li c a t e  
L
DUPLCT  
DIG  
TOC  
CD  
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC  
REC  
1π 1  
ALL SYNC  
0 0 0  
–6 –2  
L
dB  
R
DUPLCT  
DIG  
TOC  
CD  
–30 –10  
0
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DUPLICATING A CD  
Note  
Memo  
New recordings cannot be added to a CD-R or CD-RW disc on  
which some tracks have been previously recorded.  
The OPC (Optimum Power Control) feature may start  
automatically depending on disc conditions. In this case, the  
message “OPC Adjust” appears on the display until the  
adjustment is done (about 10 seconds) before the copy process  
starts.  
REC  
R e c o r d i n g  
1%  
–2  
L
dB  
R
DUPLCT  
AUTO  
SYNC  
DIGM  
–30 –10  
–6  
0
CDR  
CD TEXT  
The copying conditions are as follows:  
• Copy Method: “Digital Move”  
If a CD to be duplicated has CD TEXT that can be copied, CD  
TEXT will be automatically copied at duplication.  
• Copy Level:  
• Copy Speed:  
0dB  
“Best Effort”  
Duplicating with high quality sounds (Audio Master Quality Recording)  
You can duplicate a CD with high quality sound with the Audio Master Quality Recording feature.  
Notes  
• Audio Master Quality Recording can be used only for duplicating on a new CD-R disc.  
OPEN/CLOSE  
• Recordable time is 63 minutes for a 74-minute CD-R disc, and 68 minutes for an 79-minute CD-R disc.  
COPY  
A. M. Q. R. TIMER REC  
REC  
A.M.Q.R.  
FINALIZE ERASE  
INPUT  
MULTI JOG  
PUSH ENTER  
NATURAL SOUND HDD/CD RECORDER  
REPEAT RANDOM INTRO TEXT/TIME  
TEXT/TIME  
MODE  
MENU  
CLEAR  
POWER  
TRACK NO. COMPLETE  
BOOKMARK  
ABC  
DEF  
GHI  
1
2
3
DIGITAL REC LEVEL  
HDD  
CDR  
COPY  
JKL  
MNO  
PQR  
PHONES  
LEVEL  
ANALOG REC LEVEL  
INPUT  
4
5
6
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
STU  
VWX  
YZ  
MIN  
MAX  
MIN  
MAX  
7
8
9
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
0
A.M.Q.R.  
MODE  
1. Press A.M.Q.R. while the unit is in the duplicate  
Notes  
• When total time of the CD to be duplicated exceeds  
recordable time on a CD-R disc (63 minutes for a 74-minute  
CD-R disc and 68 minutes for an 79-minute CD-R disc), the  
following message appears on the display. In this case, Audio  
Master Quality Recording cannot be used.  
standby mode (P.45).  
The A.M.Q.R. indicator lights up on the display.  
DUPLCTA.M.Q.R.  
2. Carry out steps 3 and 4 in “DUPLICATING A CD”  
(P.45) to duplicate a CD (copy from a CD to the HDD  
and copy from the HDD to a new CD-R or CD-RW  
disc).  
REC  
N o E n o u g h S p c  
L
DUPLCTA.M.Q.R.  
DIG  
TOC  
CD  
dB  
R
–30 –10  
–6  
–2  
0
ALL SYNC  
• When a CD-R disc other than a 74-minute, 79-minute or 4x  
writing compatible CD-R disc is loaded, or a CD-RW disc is  
loaded on this unit, the following message appears on the  
display. In this case, Audio Master Quality Recording cannot  
be used.  
REC  
A M Q R  
1%  
–2  
L
dB  
R
DUPLCTA.M.Q.R.AUTO  
SYNC  
DIGM  
–30 –10  
–6  
0
CDR  
The copying conditions are as follows:  
• Copy Method: “Digital Move”  
REC  
U n a v a i la b le  
L
DUPLCTA.M.Q.R.  
DIG  
TOC  
CD  
dB  
R
–30 –10  
–6  
–2  
0
• Copy Level:  
• Copy Speed:  
0dB  
ALL SYNC  
Best Effort  
• Once copying starts, no button operation is effective until  
copying is completed.  
When copying has been completed, the operation of  
the HDD and the CD automatically stops.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FINALIZING A CD-R/CD-RW DISC  
Finalization is the process that concludes recording, and allows a CD-R disc to be played on a standard CD player or a CD-RW disc to be  
played on a CD-RW-compatible player.  
ENTER  
COMPLETE  
CLEAR  
OPEN/CLOSE  
COPY  
A. M. Q. R. TIMER REC  
REC  
TRACK NO.  
WRITE  
MULTI JOG  
PUSH ENTER  
ER  
HDD  
FINALIZE ERASE  
INPUT  
TEXT/TIME  
MODE  
MENU  
CLEAR  
FINALIZE  
TRACK NO. COMPLETE  
BOOKMARK  
REPEAT RANDOM INTRO TEXT/TIME  
CDR  
DIGITAL REC LEVEL  
ABC  
DEF  
GHI  
COPY  
1
2
3
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
JKL  
MNO  
PQR  
4
MIN  
MAX  
4
5
6
W/D  
STU  
VWX  
YZ  
GROUP SKIP  
7
8
9
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
FINALIZE w/d  
0
MODE  
1. Set a not-finalized CD-R or CD-RW disc in the disc  
Notes  
tray.  
• Further recording is not possible onto a finalized CD-R disc.  
Make sure that all recordings have been completed before  
finalization.  
2. Press FINALIZE.  
The confirmation message appears on the display.  
To cancel finalization, press a.  
• Make sure a CD-R or CD-RW disc has no scratches, dust,  
fingerprints or similar marks before loading. Wipe a CD-R or  
CD-RW disc if there is any dust on it.  
F i n a li z e O K ?  
• Once the finalization process has started, no other operation  
is possible until finalization is completed.  
L
dB  
R
–30 –10  
–6  
–2  
0
CDR  
• Never turn off the power or disconnect the power cord during  
finalization.  
3. Press w/d to start finalization.  
REC  
F i n a li z i n g  
CDR  
The level meter shows the finalization progress on the display.  
CDR  
When starting finalization  
CDR  
During finalization  
When finalization is completed, the TOC indicator lights and  
the unit enters the stop mode.  
TOC  
CDR  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ERASING DATA ON A CD-RW DISC  
You can erase the data recorded on a CD-RW disc. New recordings can be made in the space created by erasing. The following four types of  
erasing are possible with this unit.  
ENTER  
COMPLETE  
CLEAR  
OPEN/CLOSE  
COPY  
A. M. Q. R. TIMER REC  
REC  
TRACK NO.  
WRITE  
MULTI JOG  
PUSH ENTER  
ER  
HDD  
FINALIZE ERASE  
INPUT  
TEXT/TIME  
MODE  
MENU  
CLEAR  
ERASE  
TRACK NO. COMPLETE  
BOOKMARK  
REPEAT RANDOM INTRO TEXT/TIME  
CDR  
DIGITAL REC LEVEL  
ABC  
DEF  
GHI  
COPY  
1
2
3
INPUT  
ANALOG REC LEVEL  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
JKL  
MNO  
PQR  
A.M.Q.R.  
MIN  
MAX  
4
5
6
W/D  
STU  
VWX  
YZ  
GROUP SKIP  
7
8
9
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
ERASE w/d  
0
MODE  
Erasing last tracks  
Erasing all tracks  
This operation erases the last track on a disc. “Last Track Erase”  
cannot be performed if a CD-RW disc has been finalized, or only  
one track has been recorded on the disc.  
This operation erases all tracks recorded on a CD-RW disc. TOC  
will be erased also if a CD-RW disc has been finalized.  
1. Set a CD-RW disc in the disc tray, then press ERASE  
repeatedly until “Erase ALL ?” appears on the  
display.  
1. Set a not-finalized CD-RW disc in the disc tray, then  
press ERASE.  
“Erase Last ?” appears on the display.  
E r a s e A L L ?  
L
dB  
R
–30 –10  
–6  
–2  
0
CDRW  
E r a s e L a s t ?  
TRACK  
CDRW  
L
dB  
R
–30 –10  
–6  
–2  
0
To cancel erasing, press a.  
Go to the next step when erasing only the last track. To erase  
two or more tracks, rotate the MULTI JOG knob (press +/–, H  
or G on the remote control) to specify the track number (to start  
erasing from).  
2. Press w/d to start erasing.  
“Erasing” flashes on the display, and the level meter shows the  
erasing progress.  
Erasing TOC  
E r a s e  
2 - 9 ?  
TRACK  
CDRW  
L
dB  
R
–30 –10  
–6  
–2  
0
This operation erases TOC (Table of Contents) data from a finalized  
CD-RW disc. After erasing TOC data, you can record another track  
data onto the CD-RW disc.  
Track to start erasing from  
Last track  
To cancel erasing, press a.  
1. Set a finalized CD-RW disc in the disc tray, then  
2. Press w/d to start erasing.  
press ERASE.  
“Erasing” flashes on the display, and the level meter shows the  
erasing progress.  
“Erase TOC ?” appears on the display.  
E r a s e T O C ?  
L
TOC  
dB  
R
–30 –10  
–6  
–2  
0
CDRW  
To cancel erasing, press a.  
2. Press w/d to start erasing.  
“Erasing” flashes on the display, and the level meter shows the  
erasing progress.  
Memo  
The TOC indicator turns off when “TOC Erase” has been com-  
pleted.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ERASING DATA ON A CD-RW DISC  
Initializing a CD-RW disc  
This operation initializes a CD-RW disc.  
1. Set a CD-RW disc in the disc tray, then press and  
hold ERASE for about two seconds.  
“Erase Disc ?” appears on the display.  
E r a s e D i s c ?  
L
dB  
R
–30 –10  
–6  
–2  
0
CDRW  
To cancel erasing, press a.  
4
2. Press w/d to start erasing.  
“Erasing” flashes on the display, and the level meter shows the  
erasing progress (the process takes about 20 minutes).  
Notes  
• “Erase Last” and “Erase TOC” cannot be applied to a CD-RW  
disc recorded with “Full Auto” (P.42) (except for adding track  
data to a disc without finalization) or a CD-RW disc recorded  
with duplication.  
• Never turn off the power of this unit during erasing.  
• If “Check Disc” appears on the display during erasing, and  
erasing stops, there may be dust or damage on the CD-RW disc.  
Check the CD-RW disc and start the erasing operation again.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIST OF EDIT MENU  
In the edit menu, you can edit album, track, and disc data stored in the HDD. Please select the menu listed below for any purpose. Also, the  
Undo feature enables to cancel the last edit operation.  
Selectable during  
Edit menu  
Album New  
Menu content  
Page  
playback*  
To create a new album  
52  
53  
54  
54  
55  
55  
55  
56  
56  
57  
58  
59  
60  
60  
62  
62  
63  
64  
64  
65  
67  
67  
68  
68  
69  
69  
70  
Edit Stored  
To edit an already created album  
To copy other group as an album  
Album Copy  
Album Rename To change the album number  
Album Delete  
Album Pack  
Album Title  
Track Shuffle  
Track Level  
Tr. Interval  
To delete an album  
s
Album Edit  
To eliminate unused album numbers  
To assign an album title  
s
s
s
s
s
s
s
s
s
To change the order of tracks in an album  
To adjust the track level in an album  
To adjust each track interval in an album  
To change a track number  
Track Rename  
Track Adjust  
Track Erase  
Part Erase  
To adjust the beginning of a track  
To erase a track  
To erase the part of a track  
Track Combine To combine a series of tracks  
Track Edit  
Track Divide  
Track Pack  
Add Fade In  
Add Fade Out  
Track Title  
Disc Rename  
Disc Erase  
To divide one track into two  
To eliminate unused track numbers  
To add fade-in to the beginning of a track  
To add fade-out to the end of a track  
To assign a track title  
s
s
s
s
s
s
s
To change a disc number  
To erase a disc  
Disc Combine  
Disc Divide  
Disc Pack  
To combine a series of discs  
To divide one disc into two  
To eliminate unused disc numbers  
To assign a disc title  
Disc Edit  
Undo  
s
Disc Title  
s
To cancel the editing operation  
*A menu with mark is not available during playback. A menu with mark is available in any case. However, if you carry out an edit  
s
operation during playback, you cannot select an item (album, disc, or track) other than one currently played back.  
Cursor button operations in the edit menu  
In the edit menu, you can also use the cursor buttons although cursor button operations are not explained in each procedure (P.52-69). It  
makes edit operations easier.  
ENTER  
H, G: Selects items or parameters.  
Q
,
W: Moves the insertion point.  
ENTER : Confirms items or parameters selected by pressing +/–, H or G.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIST OF EDIT MENU  
Entering characters in the edit  
menu  
Entering the title characters by using the  
MULTI JOG knob  
1. Rotate the MULTI JOG knob.  
When the MULTI JOG knob is rotated clockwise, characters  
appear in the order of alphabetical capital letters, alphabetical  
lower case letters, numbers, and symbols.  
2. Press the MULTI JOG knob to confirm the selected  
character.  
5
The cursor moves to the next space. Repeat steps 1 and 2 until  
the title is complete. A title can contain up to 32 characters.  
Entering the title characters by using the  
alphabetical/numeric buttons on the remote  
control  
1. Select the character to be used for the title by using  
the alphabetical/numeric buttons on the remote  
control.  
Alphabetical capital letters, alphabetical lower case letters, and  
numbers switch each time the buttons are pressed. To insert a  
space, press SPACE. To use a symbol, press SYMBOL to select  
the desired symbol.  
2. Select the next character by pressing one of the  
alphabetical/numeric buttons.  
The cursor automatically moves to the next space. When you  
need to use the button same to step 1, press Y to move the  
insertion point, then press the alphabetical/numeric button.  
Correcting the characters  
Move the cursor to the character to be corrected by pressing  
t/e or r/y (T or Y on the remote control). To clear the  
selected character, press CLEAR. To insert a character before the  
selected character, use the MULTI JOG knob or alphabetical/  
numeric buttons to select the character.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING ALBUMS  
You can select the desired tracks from among the ones recorded on the HDD and store them as an album in this unit’s memory. You can also  
edit the album afterwards.  
10  
MODE  
MENU  
MENU  
COMPLETE MULTI JOG  
MENU  
ENTER  
Cursor buttons, ENTER  
CLEAR  
MULTI JOG  
RAL SOUND HDD/CD RECORDER  
PUSH ENTER  
TEXT/TIME  
MODE  
MENU  
COMPLETE  
CLEAR  
COMPLETE  
+, –  
TRACK NO. COMPLETE  
BOOKMARK  
CLEAR  
TRACK NO.  
WRITE  
DIGITAL REC LEVEL  
HDD  
HDD  
CDR  
COPY  
L
ANALOG REC LEVEL  
INPUT  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
CDR  
MAX  
MIN  
MAX  
t/e, r/y  
CLEAR  
T, Y  
1. Press MENU while the HDD is selected (P.14).  
Album New  
You can create a new album by selecting the desired tracks from  
among the ones recorded on the HDD.  
The display changes for the menu item selection.  
A lb u m E d i t  
L
1. If “Album New” is selected (at left), the following  
dB  
R
–30 –10  
–6  
–2  
0
screen appears.  
Source disc Source track  
2. Press MULTI JOG knob (ENTER on the remote  
control).  
D 0 0 1 1  
1
0
The display changes for the editing the menu item selection.  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
3. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select a menu item, then press  
MULTI JOG knob (ENTER on the remote control) to  
confirm the selection.  
Track in the album to be created  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the source disc.  
The followings are the album editing menu items.  
• Album New* (at right)  
• Edit Stored* (P.53)  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the source disc.  
The number of the source track flashes.  
• Album Copy* (P.54)  
• Album Rename* (P.54)  
• Album Delete (P.55)  
• Album Pack* (P.55)  
Press CLEAR to cancel the confirmed selection.  
4. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the source track.  
• Album Title (P.55)  
5. Press the MULTI JOG knob (ENTER on the remote  
• Track Shuffle (P.56)  
control) to confirm the source track.  
• Track Level (P.56)  
The track number of the album being created will be advanced  
to the next, and the display returns to the one shown in step 1.  
Repeat steps 2 to 5 to select other discs and tracks.  
• Tr. Interval (P.57)  
An asterisk (*) next to a menu item indicates that the menu  
cannot be selected during playback.  
Press CLEAR to cancel the confirmed selection.  
Memo  
6. Press COMPLETE.  
• If MENU is pressed during editing, entry of the selection is  
canceled, and then this unit returns to the following state;  
– This unit returns to the editing menu item selection if having  
started editing during the stop mode.  
A new album is created with the selected tracks recorded on it.  
This unit returns to the editing menu item selection.  
– This unit returns to the playback if having started editing during  
the playback.  
• If a is pressed during editing, all entry of the selection is  
canceled, and this unit returns to the stop mode.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING ALBUMS  
6. Press the MULTI JOG knob (ENTER on the remote  
Memo  
control) to confirm the disc.  
You can switch the display by pressing TEXT/TIME (P.18) while  
an album is being made:  
Press CLEAR to cancel the confirmed selection.  
– If the title is assigned to the source disc or track, the title  
appears.  
7. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the track to be added in the album.  
– By pressing TEXT/TIME while the title is being displayed, the  
total time of the album being made appears for approximately  
one second, and the display returns to the one in step 1.  
– If no title is assigned to the source disc or track, the total time of  
the album being made appears for approximately one second,  
and the display returns to the one in step 1.  
8. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the track.  
When continuing to add tracks to the album, repeat steps 4 to 8.  
9. Press COMPLETE.  
You can create a new album from the bookmark list (P.24). For  
details, refer to “Album Copy” (P.54).  
The selected tracks are added to the album.  
This unit returns to the editing menu item selection.  
Edit Stored  
You can add tracks to or delete tracks from an already created  
album.  
(When deleting tracks)  
5
4. Press t/e or r/y (T or Y on the remote  
control) to select the track number to be deleted.  
1. If “Edit Stored” is selected (P.52), the following  
screen appears.  
D 0 0 4 2  
11  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
E d i t  
0 0 1  
?
0
L
GROUP  
Track number to be deleted  
dB  
R
–30 –10  
–6  
–2  
5. Press CLEAR.  
Album to be edited  
Memo  
2. Rotate the MULTI JOG knob (press +/– on the remote  
The tracks following the deleted track will automatically be  
down-numbered.  
control) to select the album to be edited.  
3. Press the MULTI JOG knob (ENTER on the remote  
When continuing to delete tracks from the album, repeat steps  
4 and 5.  
control) to confirm the album to be edited.  
The following message appears on the display.  
6. Press COMPLETE.  
To add new tracks to the album, carry out steps 4 to 9 in “When  
adding new tracks”. To delete tracks from the album, carry out  
steps 4 to 6 in “When deleting tracks”.  
The selected tracks are deleted from the album.  
This unit returns to the editing menu item selection.  
Disc number  
Track number  
D 0 0 1 1  
15  
L
dB  
R
GROUP  
–30 –10  
–6  
–2  
0
Track number in the album  
(When adding new tracks)  
4. Press t/e or r/y (T or Y on the remote  
control) to select the track number to where a new  
track will be added.  
D 0 0 1 1  
13  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
Track number (destination)  
5. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc where the original track is  
stored.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING ALBUMS  
Album Copy  
Album Rename  
You can copy the entire disc, album, or bookmark to a new album.  
You can move the album and assign a new number.  
1. If “Album Copy” is selected (P.52), the following  
1. If “Album Rename” is selected (P.52), the following  
screen appears.  
screen appears.  
C o p y  
D 0 0 1?  
R e n a m e  
0 0 1?  
–30 –10 –6 –2  
L
L
dB  
R
GROUP  
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
0
Group to be copied from  
Album to be moved  
The number of the album to be moved flashes.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the group to be copied from.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
The group to be copied from switches in the order of “disc” ➞  
“album” “bookmark”.  
control) to select the album to be moved.  
3. Press the MULTI JOG knob (ENTER on the remote  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the album to be moved.  
control) to confirm the group to be copied from.  
The display scrolls to the left to indicate the number of the  
album to be moved and the new album number.  
The display scrolls to the left to indicate the number of the  
group to be copied from and the number of the album to be  
copied to. The album to be copied on is assigned the smallest  
available number.  
A 0 0 1  
0 0 2  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
D 0 0 1  
0 0 2  
Album to be moved  
New album number  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
Press CLEAR to cancel the confirmed selection.  
Group to be copied from  
Album to be copied to  
4. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the new album number.  
Press CLEAR to cancel the confirmed selection.  
5. Press the MULTI JOG knob (ENTER on the remote  
4. Press COMPLETE.  
control) to confirm the new album number.  
The selected group is copied to a new album.  
This unit returns to the editing menu item selection.  
Press CLEAR to cancel the confirmed selection.  
6. Press COMPLETE.  
The selected album has been moved and assigned a new  
number.  
This unit returns to the editing menu item selection.  
Memo  
• If the selected new album number is already in use, the albums  
following this renumbered album will be automatically up-  
numbered by one. However, if there is any unused album number,  
only the albums up to that number will be up-numbered.  
• The original number of the album that has been renumbered will  
be available for future use.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING ALBUMS  
Album Delete  
Album Pack  
You can delete an existing album.  
You can re-organize the album numbers by eliminating unused  
album numbers that have been created by changing album numbers  
or deleting albums.  
1. If “Album Delete” is selected (P.52), the following  
screen appears.  
1. If “Album Pack” is selected (P.52), the following  
screen appears.  
D e le t e  
0 0 1?  
–30 –10 –6 –2  
L
dB  
R
GROUP  
0
P a c k ?  
L
Album to be deleted  
dB  
R
–30 –10  
–6  
–2  
0
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 4 since you do not need to select an item.  
2. Press COMPLETE.  
The album numbers are re-organized without unused album  
numbers.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
This unit returns to the editing menu item selection.  
control) to select the album to be deleted.  
5
Before “Album Pack”  
3. Press the MULTI JOG knob (ENTER on the remote  
1
3
4
6
6
control) to confirm the album.  
Press CLEAR to cancel the confirmed selection.  
4. Press COMPLETE.  
The selected album has been deleted.  
This unit returns to the editing menu item selection.  
1
2
3
4
5
After “Album Pack” (Unused albums are removed)  
Memo  
Album Title  
You can assign a title to a created album.  
The number of the deleted album will be available for future use.  
1. If “Album Title” is selected (P.52), the following  
screen appears.  
T i t le  
0 0 1?  
–30 –10 –6 –2  
L
dB  
R
GROUP  
0
Album to assign the title to  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 4 since you do not need to select an item.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the album to assign a title to.  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the album to assign a title to.  
 
L
dB  
R
–30 –10  
–6  
–2  
0
The cursor flashes. (If the selected album already has a title, the  
title appears on the display.)  
4. Use the MULTI JOG knob (press alphabetical/numeric  
buttons on the remote control) to enter characters.  
For details on selecting characters, refer to “Entering characters  
in the edit menu” (P.51).  
5. Press COMPLETE when all the characters have been  
entered.  
The title is assigned to the selected album. Press TEXT/TIME  
to switch the display information as necessary (P.18).  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING ALBUMS  
Track Shuffle  
Track Level  
You can change the order of tracks in an album.  
You can adjust the sound level of track in an album.  
1. If “Track Shuffle” is selected (P.52), the following  
1. If “Track Level” is selected (P.52), the following  
screen appears.  
Track number  
screen appears.  
Track to adjust its level  
S h u f f le 0 0 1 1?  
L e v e l  
0 0 1 1?  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
Album to change its tracks’ order  
Album to adjust its tracks’ level  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the album to change its track’ order.  
control) to select the album to adjust its tracks’ level.  
3. Press the MULTI JOG knob (ENTER on the remote  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the album.  
control) to confirm the album.  
The number of the track to be moved flashes.  
The number of the track to adjust its level flashes.  
Press CLEAR to cancel the confirmed selection.  
Press CLEAR to cancel the confirmed selection.  
4. Rotate the MULTI JOG knob (+/– on the remote  
4. Rotate the MULTI JOG knob (+/– on the remote  
control) to select the track to be moved.  
control) to select the track to adjust.  
5. Press the MULTI JOG knob (ENTER on the remote  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the track.  
control) to confirm the track.  
The display scrolls to the left to indicate the number of the  
album to change its tracks’ order, the number of the track to be  
moved, and the new track number.  
Playback of the confirmed track starts, and the following  
message appears on the display.  
New track number  
LEVEL  
T r . 1  
0 . 0 d B  
L
dB  
R
–30 –10  
–6  
–2  
0
0 0 1 1  
2
–6  
TRACK  
L
dB  
R
–30 –10  
–2  
0
Track to adjust its level  
Press CLEAR to cancel the confirmed selection.  
Album to change its Track to be moved  
track’ order  
6. Rotate the MULTI JOG knob (press +/– on the remote  
Press CLEAR to cancel the confirmed selection.  
control) to adjust the level.  
Adjustment is possible in the –12dB to +12dB range by 0.4dB  
steps.  
6. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the new track number.  
You can compare the level with the previous or next track’ level  
by pressing t/e or r/y (T or Y on the remote  
control).  
7. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the new track number.  
Press CLEAR to cancel the confirmed selection.  
7. Press COMPLETE.  
8. Press COMPLETE.  
The level of the selected track is confirmed.  
The selected track has been moved and assigned a new number.  
This unit returns to the editing menu item selection.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING ALBUMS  
Memo  
Tr. Interval  
• The level may change slightly out of the point that the track itself  
changes during the playback of the album with its tracks’ level  
adjusted. In this case, add the 1-to-2 second interval using the “Tr.  
Interval” function (at right).  
You can insert an interval at the beginning of the selected track of  
an album.  
1. If “Tr. Interval” is selected (P.52), the following screen  
appears.  
Track number  
You can not copy the album with its tracks’ level adjusted in the  
Audio Master Quality Recording feature (P.41).  
You can also adjust the copy level (P.44) when copying the album  
with its tracks’ level adjusted. The copy will be made in the total  
level adjusted in “Track Level” and “Copy Level” in the copy  
menu.  
In t .  
0 0 1 1?  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
Album to adjust its track interval  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
5
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the album to adjust its tracks  
interval.  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the album.  
The number of the track to be adjusted flashes.  
Press CLEAR to cancel the confirmed selection.  
4. Rotate the MULTI JOG knob (+/– on the remote  
control) to select the track to adjust its interval.  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the track.  
The ending of the previous track for 5 seconds and the  
beginning of the selected track for 5 seconds are repeatedly  
played.  
In t : 3 . 5  
5 13  
–6 –2  
L
dB  
R
–30 –10  
0
TIME  
Track interval  
Playing time of the track  
Press CLEAR to cancel the confirmed selection.  
Memo  
If there is no track before the track that is selected and  
confirmed, “No Previous” appears on the display, and this unit  
returns to step 4. (If the edit menu is selected during playback,  
the unit cancels the edit operation.)  
6. Rotate the MULTI JOG knob (press +/– on the remote  
control) to adjust the interval.  
Adjustment is possible in the 0 to 9.9 seconds range by 0.1-  
second steps.  
If you stop rotating the MULTI JOG knob, the ending of the  
previous track for 5 seconds and the beginning of the selected  
track for 5 seconds will be repeatedly played with the adjusted  
interval.  
7. Press COMPLETE.  
The interval between the selected track and the previous track  
is confirmed.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING TRACKS  
You can do various editing operations on the tracks that have been recorded on the HDD.  
10  
MODE  
MENU  
MENU  
COMPLETE MULTI JOG  
MENU  
ENTER  
Cursor buttons, ENTER  
CLEAR  
MULTI JOG  
RAL SOUND HDD/CD RECORDER  
PUSH ENTER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
COMPLETE  
CLEAR  
COMPLETE  
+, –  
TRACK NO. COMPLETE  
BOOKMARK  
TRACK NO.  
WRITE  
DIGITAL REC LEVEL  
HDD  
CDR  
COPY  
HDD  
L
ANALOG REC LEVEL  
INPUT  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
CDR  
MAX  
MIN  
MAX  
E, R  
T, Y  
t/e, r/y  
CLEAR  
1. Press MENU while the HDD is selected (P.14).  
Track Rename  
You can move a track and assign a new number.  
The display changes for the menu item selection.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
1. If “Track Rename” is selected (at left), the following  
remote control) to select “Track Edit”  
screen appears.  
Disc that contains the track to be moved  
T r a c k E d i t  
L
dB  
R
–30 –10  
–6  
–2  
0
R e n a m e 0 0 1 1?  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
3. Press MULTI JOG knob (ENTER on the remote  
control).  
Track to be moved  
The display changes for the editing menu item selection.  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
4. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select a menu item, then press  
MULTI JOG knob (ENTER on the remote control) to  
confirm the selection.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc that contains the track to  
be moved.  
The followings are the track editing menu items:  
• Track Rename (at right)  
• Track Adjust (P.59)  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the disc.  
• Track Erase (P.60)  
The number of the track to be moved flashes.  
• Part Erase (P.60)  
• Track Combine (P.62)  
Press CLEAR to cancel the confirmed selection.  
• Track Divide (P.62)  
4. Rotate the MULTI JOG knob (press +/– on the remote  
• Track Pack* (P.63)  
control) to select the track to be moved.  
• Add Fade In (P.64)  
5. Press the MULTI JOG knob (ENTER on the remote  
• Add Fade Out (P.64)  
control) to confirm the track.  
• Track Title (P.65)  
The display scrolls to the left to indicate the disc number that  
contains the track to be moved, the existing track number, and  
the new track number.  
* “Track Pack” cannot be selected during playback.  
Memo  
Disc that contains the track to be moved  
• If MENU is pressed during editing, entry of the selection is  
canceled, and then this unit returns to the following state;  
– This unit returns to the editing menu item selection if having  
started editing during the stop mode.  
0 0 1 1  
1
–6  
TRACK  
L
dB  
R
–30 –10  
–2  
0
– This unit returns to the playback if having started editing during  
playback.  
Current track number  
New track number  
• If a is pressed during editing, all entry of the selection is  
canceled, and this unit returns to the stop mode.  
Press CLEAR to cancel the confirmed selection.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING TRACKS  
6. Rotate the MULTI JOG knob (press +/– on the remote  
Memo  
control) to select the new track number.  
If there is no track before the track that is selected and  
confirmed, “No Previous” appears on the display, and this unit  
returns to step 4. (If the edit menu is selected during playback,  
the unit cancels the edit operation.)  
7. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the new track number.  
Press CLEAR to cancel the confirmed selection.  
6. Rotate the MULTI JOG knob (press +/– on the remote  
8. Press COMPLETE.  
control) to adjust the time length (displacement).  
The selected track is renumbered.  
The time length can be adjusted by “minute: second: frame”.  
(Frame is the unit used for values smaller than 1 second. 75  
frames make 1 second.) The unit to be set is flashing. Move the  
flash to the unit to be adjusted by pressing t/e or r/y  
(E or R on the remote control).  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
Memo  
• If the selected new track number is already in use, the tracks  
following this renumbered track will be automatically up-  
numbered by one. However, if there is any unused track number,  
only the tracks up to that number will be up-numbered.  
If you stop rotating the MULTI JOG knob, this unit searches  
for the temporarily changed beginning point of the track  
according to the time length setting made, and starts repeated  
playback from the new beginning point to the end of the disc.  
5
• The original number of the track that has been renumbered will be  
available for future use.  
Press CLEAR to cancel the adjustment.  
7. Press COMPLETE.  
Track Adjust  
You can change the beginning of the track forward or backward.  
The new track beginning point is set.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
1. If “Track Adjust” is selected (P.58), the following  
screen appears.  
Before “Track Adjust”  
Disc that contains the track to be adjusted  
1
2
A d j u s t 0 0 1 2 ?  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
1
2
Track to be adjusted  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
After “Track Adjust” (Track 2 is displaced forward)  
Memo  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc that contains the track to  
be adjusted.  
• If the adjusted track includes a part that cannot be copied digitally  
before adjusting, the adjusted track itself cannot be copied  
digitally either.  
• When the emphasis status of the track to be adjusted is different  
from that of the previous track, the emphasis status of the track to  
be adjusted takes precedence over the previous track.  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the disc.  
The number of the track to be adjusted flashes.  
Press CLEAR to cancel the confirmed selection.  
4. Select the track to be adjusted by rotating the MULTI  
JOG knob (pressing +/– on the remote control).  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the track.  
The confirmed track will be played.  
The following message appears in the display.  
The time length to be adjusted  
0 12  
+ 0 10 0 0  
TIME  
Playing time of the track  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING TRACKS  
Track Erase  
Part Erase  
You can erase a selected track.  
You can erase part of a selected track.  
1. If “Track Erase” is selected (P.58), the following  
1. If “Part Erase” is selected (P.58), the following screen  
screen appears.  
appears.  
Disc that contains the track to be erased  
Disc that contains the track to be partially erased  
E r a s e  
0 0 1 1?  
P r t . E r . 0 0 1 1?  
L
GROUP  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
dB  
R
–30 –10  
–6  
–2  
0
Track to be erased  
Track to be partially erased  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc that contains the track to  
be erased.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc that contains the track to  
be partially erased.  
3. Press the MULTI JOG knob (ENTER on the remote  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the disc.  
control) to confirm the disc.  
The number of the track to be erased flashes.  
The number of the track to be partially erased flashes.  
Press CLEAR to cancel the confirmed selection.  
Press CLEAR to cancel the confirmed selection.  
4. Rotate the MULTI JOG knob (press +/– on the remote  
4. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the track to be erased.  
control) to select the track to be partially erased.  
5. Press the MULTI JOG knob (ENTER on the remote  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the track.  
control) to confirm the track.  
The passage between the point that is 5 seconds before the  
temporary beginning point of the partial erase and the  
temporary beginning point (the point that is 10 seconds elapsed  
from the beginning of the track) is repeatedly played.  
Press CLEAR to cancel the confirmed selection.  
To check the track to be erased, press w/d. This unit starts to  
play the track to be erased repeatedly.  
6. Press COMPLETE.  
Beginning point (minute: second: frame)  
The selected track is erased.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
0 0 5 A  
0 10 0 0  
TIME  
Memo  
Playing time of the track  
The number of the track that has been erased will be available for  
future use.  
6. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the beginning point of the partial  
erase.  
The beginning point of the partial erase can be set by “minute:  
second: frame”. The unit to be set is flashing. Move the flash to  
the unit to be set by pressing t/e or r/y (E or R on  
the remote control).  
If you stop rotating the MULTI JOG knob, this unit searches  
for the beginning point according to the setting made, and starts  
repeated playback of the passage between the point that is 5  
seconds before the beginning point and the beginning point.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING TRACKS  
7. Press MULTI JOG knob (ENTER on the remote  
control) to confirm the beginning point of the partial  
erase.  
To change the ending point, press CLEAR once to return to  
step 8.  
To change the beginning point, press CLEAR twice to return to  
step 6.  
The passage between the temporary ending point of the partial  
erase (the point that is 10 seconds after the beginning point)  
and the point that is 5 seconds after the temporary ending point  
is repeatedly played.  
10.Press COMPLETE.  
The selected part is erased.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
Ending point of the partial erase  
0 2 0 B  
0 2 0 0 0  
TIME  
Playing time of the track  
Press CLEAR to cancel the confirmed selection.  
8. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the ending point of the partial  
erase.  
5
The ending point of the partial erase can be set by “minute:  
second: frame”. The unit to be set is flashing. Move the flash to  
the unit to be set by pressing t /e or r/y (E or R  
on the remote control).  
If you stop rotating the MULTI JOG knob, this unit searches  
for the ending point according to the setting made, and starts  
repeated playback of the passage between the ending point and  
the point that is 5 seconds after the ending point.  
9. Press MULTI JOG knob (ENTER on the remote  
control) to confirm the ending point of the partial  
erase.  
The passage between the point that is 5 seconds before the  
beginning point and the point that is 5 seconds after the ending  
point of the partial erase is repeatedly played.  
The following message appears on the display.  
P r t . E r .  
P t . F i x  
0 0 5  
–6 –2  
L
dB  
R
–30 –10  
0
0 0 6  
L
dB  
R
–30 –10  
–6  
–2  
0
Notes  
• The sound may be interrupted at the joint but it will be played  
properly after the partial erase is completed.  
• The minimum length of a track is four seconds. It is not  
possible to create a track shorter than four seconds by erasing  
partially.  
Track  
1
2
Track  
3
: Part to be erased  
1 Repeated passage when setting the beginning point  
2 Repeated passage when setting the ending point  
3 Repeated passage after confirming the ending point  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING TRACKS  
Memo  
Track Combine  
• When combining a series of tracks, the selected track numbers  
following the selected first track will be available for future use.  
You can combine a series of tracks into one.  
1. If “Track Combine” is selected (P.58), the following  
• The track title for the first track is effective for the combined  
track.  
screen appears.  
Disc that contains the first track to be combined  
• If there is any track that cannot be copied digitally among the  
tracks to be combined, the combined track cannot be copied  
digitally either.  
C o m b .  
0 0 1 1?  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
• When tracks with different emphasis status have been combined,  
the emphasis status of the first track becomes effective for the  
combined track.  
Track to be the first in the combination  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
Track Divide  
You can divide a track into two at the selected point.  
1. If “Track Divide” is selected (P.58), the following  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc that contains the first track  
for the combination.  
screen appears.  
Disc that contains the track to be divided  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the disc.  
D i v i d e 0 0 1 1?  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
The number of the track to be the first in the combination  
flashes.  
Track to be divided  
Press CLEAR to cancel the confirmed selection.  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
4. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the first track for the combination.  
5. Press the MULTI JOG knob (ENTER on the remote  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc that contains the track to  
be divided.  
control) to confirm the track.  
The display scrolls to the left to indicate the disc number that  
contains the first track to be combined, the track number to be  
the first in the combination, and the track number to be the last  
in the combination.  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the disc.  
The number of the track to be divided flashes.  
Disc that contains the first track for the combination  
Press CLEAR to cancel the confirmed selection.  
0 0 1 1  
-
2
–6  
TRACK  
L
dB  
R
4. Rotate the MULTI JOG knob (press +/– on the remote  
–30 –10  
–2  
0
control) to select the track to be divided.  
First track for the  
combination  
Second track for the  
combination  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the track.  
Press CLEAR to cancel the confirmed selection.  
The passage between the temporary dividing point (the point  
that is 10 seconds elapsed from the beginning of the track) and  
the point that is 5 seconds after the temporary dividing point is  
repeatedly played.  
6. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the second track for the  
combination.  
Dividing point  
7. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the track.  
0 12  
+ 0 10 0 0  
TIME  
Press CLEAR to cancel the confirmed selection.  
8. Press COMPLETE.  
Playing time of the track  
The two selected tracks and all those between are combined  
into one track.  
This unit returns to the editing menu item selection.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING TRACKS  
6. Rotate the MULTI JOG knob (press +/– on the remote  
Track Pack  
control) to specify the dividing point.  
You can re-organize the track numbers by eliminating unused track  
numbers, that have been created by changing track numbers or  
erasing tracks.  
The dividing point can be set by “minute: second: frame”. The  
unit to be set is flashing. Move the flash to the unit to be set by  
pressing t/e or r/y (E or R on the remote control).  
1. If “Track Pack” is selected (P.58), the following  
If you stop rotating the MULTI JOG knob, this unit searches  
for the dividing point according to the setting made, and starts  
repeated playback of the passage between the dividing point  
and the point that is 5 seconds after the dividing point.  
screen appears.  
P a c k  
0 0 1  
?
0
L
dB  
R
–30 –10  
–6  
–2  
Dividing point  
Track  
Disc to be organized  
Passage to be repeatedly played  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc to be organized.  
7. Press COMPLETE.  
5
3. Press the MULTI JOG knob (ENTER on the remote  
The selected track is divided into two at the set dividing point.  
control) to confirm the disc.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
Press CLEAR to cancel the confirmed selection.  
Notes  
4. Press COMPLETE.  
• The minimum length of a track is four seconds. It is not possible  
to create a track that is shorter than four seconds by dividing a  
track.  
The disc is re-organized by eliminating unused track numbers.  
This unit returns to the editing menu item selection.  
Before “Track Pack”  
• One disc can contain up to 99 tracks. If the disc already contains  
99 tracks, “Track No.Full” appears on the display.  
1
3
4
6
Memo  
The track numbers following the divided track will be up-numbered  
by one. However, if there is any unused track number, only the  
tracks up to that number will be up-numbered.  
1
2
3
4
5
6
After “Track Pack” (Unused track numbers have been eliminated.)  
Before “Track Divide”  
1
2
4
5
5
6
6
Divided into two  
1
2
3
4
After “Track Divide” (When Track 1 is divided)  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING TRACKS  
Memo  
Add Fade In  
• Fade-in cannot be added to a track that is shorter than 21 seconds.  
You can add fade-in at the beginning of a track. The beginning of  
the track is played with gradually rising level when fade-in has  
been added.  
• The fade-in effect becomes ineffective if the following editing is  
performed to the track which the fade-in is added to.  
– Erasing a certain part of the track (Part Erase).  
– Combining the track (Track Combine).  
1. If “Add Fade In” is selected (P.58), the following  
screen appears.  
– Dividing the track (Track Divide).  
Disc that contains the track to add fade-in  
– Adjusting the beginning of the track (Track Adjust).  
• If “Track Adjust” has been performed, the fade-in effect of both  
the adjusted track and the previous track becomes ineffective.  
F d . In  
0 0 1 1?  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
Add Fade Out  
You can add fade-out at the end of a track. The end of the track is  
played with gradually lowering the level when fade-out has been  
added.  
Track to add fade-in  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
1. If “Add Fade Out” is selected (P.58), the following  
screen appears.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc that contains the track to  
add fade-in.  
Disc that contains the track to add fade-out  
F d . O u t 0 0 1 1?  
3. Press the MULTI JOG knob (ENTER on the remote  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
control) to confirm the disc.  
The number of the track to add fade-in flashes.  
Track to add fade-out  
Press CLEAR to cancel the confirmed selection.  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
4. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the track to add fade-in.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc that contains the track to  
add fade-out.  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the track.  
The beginning of the track for eight seconds is repeatedly  
played with a three second (initial setting) fade-in.  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the disc.  
Fade-in length  
The number of the track to add fade-out flashes.  
F . In  
3
0 0 1  
–30 –10 –6 –2  
Press CLEAR to cancel the confirmed selection.  
L
dB  
R
0
TIME  
4. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the track to add fade-out.  
Playing time of the track  
5. Press the MULTI JOG knob (ENTER on the remote  
6. Rotate MULTI JOG knob (+/– on the remote control)  
control) to confirm the track.  
to set the fade-in length.  
The ending of the track for eight seconds is repeatedly played  
with a three second (initial setting) fade-out.  
The fade-in length can be set in the 1 to 10 second range by  
one second steps.  
Fade-out length  
If you stop rotating the MULTI JOG knob, this unit starts  
repeated playback of the beginning of the track with a fade-in  
of the length set in above step, with extra portion for further  
five seconds.  
F . O u t 3  
10 0 1  
–30 –10 –6 –2  
L
dB  
R
0
TIME  
Press CLEAR to cancel the setting.  
Playing time of the track  
7. Press COMPLETE.  
The fade-in is added to the beginning of the selected track for  
the selected length.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING TRACKS  
6. Rotate MULTI JOG knob (+/– on the remote control)  
Track Title  
You can assign a title to a track.  
to set the fade-out length.  
The fade-out length can be set in the 1 to 10 second range by 1-  
second steps.  
1. If “Track Title” is selected (P.58), the following screen  
appears.  
If you stop rotating the MULTI JOG knob, this unit starts  
repeated playback of the ending of the track with a fade-out of  
the length set in above step, with extra portion for further 5  
seconds.  
Disc that contains the track to assign a title to  
T i t le  
0 0 1 1?  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
Press CLEAR to cancel the setting.  
7. Press COMPLETE.  
Track to assign a title to  
The fade-out is added to the end of the selected track for the  
selected length.  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 6 since you do not need to select an item.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
5
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc that contains the track to  
assign a title.  
Memo  
• Fade-out cannot be added to a track that is shorter than 21  
seconds.  
3. Press the MULTI JOG knob (ENTER on the remote  
• The fade-out effect becomes ineffective if the following editing is  
performed to the track which the fade-out is added to.  
– Erasing a certain part of the track (Part Erase).  
– Combining the track (Track Combine).  
control) to confirm the disc.  
When the disc has been confirmed, the disc number that  
contains the track to assign a title to flashes.  
– Dividing the track (Track Divide).  
Press CLEAR to cancel the confirmed selection.  
– Adjusting the beginning of the track (Track Adjust).  
4. Rotate the MULTI JOG knob (press +/– on the remote  
• If “Track Adjust” has been performed, the fade-out effect of both  
the adjusted track and the previous track becomes ineffective.  
control) to select the track to assign a title.  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the track.  
The following message appears on the display.  
 
L
dB  
R
–30 –10  
–6  
–2  
0
The cursor flashes. (If the selected track already has a title, the  
title appears on the display.)  
6. Use the MULTI JOG knob (press alphabetical/numeric  
buttons on the remote control) to enter characters.  
For details on selecting characters, refer to “Entering characters  
in the edit menu” (P.51).  
7. Press COMPLETE when all the characters have been  
entered.  
The title is assigned to the selected track. Press TEXT/TIME to  
switch the display information as necessary (P.18).  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
You can do various editing operations on the discs that have been recorded on the HDD.  
10  
COMPLETE MULTI JOG  
MENU  
MODE  
MENU  
MENU  
MULTI JOG  
RAL SOUND HDD/CD RECORDER  
PUSH ENTER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
ENTER  
Cursor buttons, ENTER  
CLEAR  
TRACK NO. COMPLETE  
BOOKMARK  
DIGITAL REC LEVEL  
COMPLETE  
CLEAR  
HDD  
CDR  
COPY  
COMPLETE  
+, –  
L
ANALOG REC LEVEL  
INPUT  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
TRACK NO.  
WRITE  
A.M.Q.R.  
MAX  
MIN  
MAX  
HDD  
CDR  
CLEAR  
1. Press MENU while the HDD is selected (P.14).  
Memo  
The display changes for the menu item selection.  
• If MENU is pressed during editing, entry of the selection is  
canceled, and then this unit returns to the following state;  
– This unit returns to the editing menu item selection if having  
started editing during the stop mode.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select “Disc Edit”.  
– This unit returns to the playback of the disc to be edited if  
having started editing during playback.  
D i s c E d i t  
L
dB  
R
–30 –10  
–6  
–2  
0
• If a is pressed during editing, all entry of the selection is  
canceled, and this unit returns to the stop mode.  
3. Press MULTI JOG knob (ENTER on the remote  
control).  
The display changes for the editing menu item selection.  
4. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select a menu item, then press  
MULTI JOG knob (ENTER on the remote control) to  
confirm the selection.  
The followings are the disc editing menu items:  
• Disc Rename (P.67)  
• Disc Erase (P.67)  
• Disc Combine (P.68)  
• Disc Divide (P.68)  
• Disc Pack* (P.69)  
• Disc Title (P.69)  
* “Disc Pack” cannot be selected during playback.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Disc Rename  
Disc Erase  
You can move a disc and assign a new number.  
You can erase a selected disc.  
1. If “Disc Rename” is selected (P.66), the following  
1. If “Disc Erase” is selected (P.66), the following screen  
screen appears.  
appears.  
R e n a m e  
0 0 1?  
–30 –10 –6 –2  
E r a s e  
0 0 1?  
–30 –10 –6 –2  
L
dB  
R
L
dB  
R
GROUP  
GROUP  
0
0
Disc to be moved  
Disc to be erased  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 4 since you do not need to select an item.  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 4 since you do not need to select an item.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the disc to be moved.  
control) to select the disc to be erased.  
5
3. Press the MULTI JOG knob (ENTER on the remote  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the disc to be moved.  
control) to confirm the disc to be erased.  
The display scrolls to the left to indicate the disc number to be  
moved and new number.  
Press CLEAR to cancel the confirmed selection.  
4. Press COMPLETE.  
D 0 0 2  
0 0 3  
The selected disc is erased.  
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
G
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
Disc to be moved  
New disc number  
Memo  
Press CLEAR to cancel the confirmed selection.  
The number of the erased disc will be available for future use.  
4. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the new disc number.  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the new disc number.  
Press CLEAR to cancel the confirmed selection.  
6. Press COMPLETE.  
The selected disc has been moved to and assigned a new  
number.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
Memo  
• If the selected new disc number is already in use, the disc  
numbers following this renumbered disc will be automatically up-  
numbered by one. However, if there is any unused disc number,  
only the discs up to that number will be up-numbered.  
• The original number of the disc that has been renumbered will be  
available for future use.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Disc Combine  
Disc Divide  
You can combine a series of discs into one.  
You can divide a disc into two at the selected point.  
1. If “Disc Combine” is selected (P.66), the following  
1. If “Disc Divide” is selected (P.66), the following  
screen appears.  
screen appears.  
C o m b i n e  
0 0 1?  
D i v i d e  
0 0 1?  
–30 –10 –6 –2  
L
dB  
R
L
dB  
R
GROUP  
GROUP  
–30 –10  
–6  
–2  
0
0
Disc to be divided  
Disc to be the first in the combination  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 4 since you do not need to select an item.  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 4 since you do not need to select an item.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
2. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the first disc for the combination.  
control) to select the disc to be divided.  
3. Press the MULTI JOG knob (ENTER on the remote  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the disc.  
control) to confirm the disc.  
“Div. from” and the dividing point (the number of the track to  
be the first after dividing) appear on the display.  
The display scrolls to the left to indicate the disc numbers to be  
the first and the last in the combination.  
D i v . f r o m  
4 ?  
–2  
TRACK  
0 0 1  
-
0 0 2  
L
dB  
R
–30 –10  
–6  
0
L
GROUP  
dB  
R
–30 –10  
–6  
–2  
0
Track to be the first after dividing  
Disc to be the first in the  
combination  
Disc to be the last in the  
combination  
Press CLEAR to cancel the confirmed selection.  
Press CLEAR to cancel the confirmed selection.  
4. Rotate the MULTI JOG knob (press +/– on the remote  
control) to specify the dividing point.  
4. Rotate the MULTI JOG knob (press +/– on the remote  
control) to select the second disc for the  
combination.  
5. Press the MULTI JOG knob (ENTER on the remote  
control) to confirm the dividing point.  
5. Press the MULTI JOG knob (ENTER on the remote  
Press CLEAR to cancel the confirmed selection.  
control) to confirm the disc.  
6. Press COMPLETE.  
Press CLEAR to cancel the confirmed selection.  
The selected disc is divided into two at the selected dividing  
point.  
6. Press COMPLETE.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
The two selected discs and all those between are combined into  
one disc.  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
Note  
The HDD can contain up to 999 discs. If the HDD already contains  
999 discs, “Disc No.Full” appears on the display.  
Notes  
• One disc can contain up to 99 tracks. When the total track number  
on a disc exceeds 99, “Track No.Full” appears on the display.  
Memo  
The disc numbers following the divided disc will be up-numbered  
by one. However, if there is any unused disc number, only the discs  
up to that number will be up-numbered.  
• The maximum length of one disc on the HDD is 179 minutes 59  
seconds. When the total time of the discs to be combined exceeds  
179 minutes 59 seconds, “No Enough Spc” appears on the  
display.  
Before “Disc Divide”  
1
2
4
5
5
6
6
Memo  
• When combining a series of discs, the selected disc numbers  
following the selected first disc will be available for future use.  
Divided into two  
• The disc title for the first disc is effective for the combined disc.  
1
2
3
4
After “Disc Divide” (When Disc 1 is divided)  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING DISCS  
Disc Pack  
Disc Title  
You can re-organize the disc numbers by eliminating unused disc  
numbers that have been created by changing disc numbers or  
erasing discs.  
You can assign a title to a recorded disc.  
1. If “Disc Title” is selected (P.66), the following screen  
appears.  
1. If “Disc Pack” is selected (P.66), the following screen  
appears.  
T i t le  
0 0 1?  
–30 –10 –6 –2  
L
dB  
R
GROUP  
0
P a c k ?  
L
dB  
R
–30 –10  
–6  
–2  
0
Disc to assign a title to  
If the edit menu is selected during playback, the unit  
automatically selects the item to be edited. In this case, skip to  
step 4 since you do not need to select an item.  
2. Press COMPLETE.  
The disc numbers are re-organized by eliminating unused disc  
numbers.  
2. Rotate the MULTI JOG knob (press +/– on the remote  
This unit returns to the editing menu item selection.  
control) to select the disc to assign a title.  
5
3. Press the MULTI JOG knob (ENTER on the remote  
Before “Disc Pack”  
control) to confirm the disc to assign a title to.  
1
3
4
6
 
L
dB  
R
–30 –10  
–6  
–2  
0
1
2
3
4
5
6
The cursor flashes. (If the selected disc already has a title, the  
title appears on the display.)  
After “Disc Pack” (Unused disc numbers have been eliminated.)  
4. Use the MULTI JOG knob (press alphabetical/numeric  
buttons on the remote control) to enter characters.  
For details on selecting characters, refer to “Entering characters  
in the edit menu” (P.51).  
5. Press COMPLETE when all the characters have been  
entered.  
The title is assigned to the selected disc. Press TEXT/TIME to  
switch the display information as necessary (P.18).  
This unit returns to the editing menu item selection. (If the edit  
menu is carried on during playback, playback restarts.)  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CANCELING EDIT OPERATIONS (UNDO)  
You can cancel an operation and the result of a previous editing step on this unit (Undo function).  
10  
MODE  
MENU  
MULTI JOG  
MENU  
MENU  
MULTI JOG  
PUSH ENTER  
NATURAL SOUND HDD/CD RECORDER  
TEXT/TIME  
MODE  
MENU  
CLEAR  
ENTER  
ENTER  
H, G  
POWER  
TRACK NO. COMPLETE  
BOOKMARK  
COMPLETE  
CLEAR  
DIGITAL REC LEVEL  
COMPLETE  
HDD  
CDR  
COPY  
TRACK NO.  
WRITE  
PHONES  
LEVEL  
ANALOG REC LEVEL  
INPUT  
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
A.M.Q.R.  
HDD  
MIN  
MAX  
MIN  
MAX  
+, –  
CDR  
COMPLETE  
1. Press MENU while this unit is in the stop mode.  
Memo  
• The undo function does not apply to “Track Level” or “Tr.  
Interval” in the Album Edit menu and “Add Fade In” or “Add  
Fade Out” in the Track Edit menu because it can be canceled at  
any time.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select “Undo”.  
U n d o  
L
• The undo function does not apply to “Album Title”, “Track Title”,  
or “Disc Title”.  
dB  
R
–30 –10  
–6  
–2  
0
3. Press the MULTI JOG knob (ENTER on the remote  
control) to display “Undo?”.  
4. Press COMPLETE.  
The previous editing operation and result are canceled.  
The undo function does not work if any of the following  
operations has been performed after the editing operation.  
• After the editing operation, a recording has been made, or this  
unit has been set in the recording pause mode to start  
recording.  
• After the editing operation, a copy has been made, or this unit  
has been set in the copy standby mode to start copying.  
• Further editing operations have been performed.  
• The HDD has been formatted.  
The following message appears on the display if the undo  
function does not work.  
N o U n d o d a t a  
L
dB  
R
–30 –10  
–6  
–2  
0
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONVERTING DIGITAL/ANALOG OUTPUT SIGNALS (DAC MODE)  
This unit has the digital-analog converter (DAC) mode. When the DAC mode is turned on, the unit outputs audio sources (audio signals input  
from the input jacks) from the both digital (OPTICAL and COAXIAL) and analog (ANALOG) jacks.  
MODE  
MENU  
MENU  
OPEN/CLOSE  
ENTER  
H, G  
COMPLETE MULTI JOG MENU  
COPY  
A. M. Q. R. TIMER REC  
REC  
COMPLETE  
CLEAR  
ENTER  
COMPLETE  
MULTI JOG  
PUSH ENTER  
TEXT/TIME  
MODE  
MENU  
FINALIZE ERASE  
INPUT  
TRACK NO.  
WRITE  
TRACK NO. COMPLETE  
BOOKMARK  
CLEAR  
INPUT  
REPEAT RANDOM INTRO TEXT/TIME  
HDD  
DIGITAL REC LEVEL  
ABC  
DEF  
GHI  
CDR  
INPUT  
ANALOG REC LEVEL  
1
2
3
REC  
FINALIZE  
ERASE  
OPTICAL  
COAXIAL  
ANALOG  
JKL  
MNO  
PQR  
+, –  
A
MIN  
MAX  
4
5
6
STU  
VWX  
YZ  
7
8
9
W/D  
INPUT  
ANALOG  
REC LEVEL  
a
w/d  
SPACE  
SYMBOL  
10  
BOOKMARK  
MENU  
GROUP SKIP  
0
MODE  
6
1. Press MENU while this unit is in the stop mode.  
4. Press INPUT to select the input sources (OPTICAL,  
COAXIAL, or ANALOG).  
The display changes for the menu item selection.  
The lamp for the selected input lights up and the unit outputs  
the input source from ANALOG LINE OUT and DIGITAL  
OUT (OPTICAL/COAXIAL) jacks.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select “DAC Mode”.  
Memo  
D A C M o d e  
L
dB  
R
–30 –10  
–6  
–2  
0
• When OPTICAL or COAXIAL is selected, the MULTI JOG  
knob functions as a volume control.  
• When ANALOG is selected, the ANALOG REC LEVEL  
control functions as a volume control.  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to enter the DAC mode.  
5. Any of the following operation cancel the DAC mode  
and start normal operation.  
• Press w/d to play the drive that had been selected before  
entering the DAC mode.  
• Press a or COMPLETE to set this unit in the stop mode.  
• Press MENU to return to the menu item selection.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDD UTILITY  
Checking HDD information  
Formatting the HDD (HDD Format)  
(HDD Info.)  
You can format the HDD in this unit.  
Notes  
You can check the HDD utility (capacity, usage, and available  
space) of this unit.  
• After the HDD has been formatted, all data about the recorded  
tracks and settings will be erased from the HDD.  
1. Press MENU while this unit is in the stop mode.  
• After all data on the HDD have been initialized, the undo function  
cannot be applied to any editing operations before formatting.  
The display changes for the menu item selection.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
1. Carry out steps 1 to 3 in “Checking HDD information  
remote control) to select “HDD Utility”.  
(HDD Info.)” (at left).  
The display changes for the HDD utility item selection.  
H D D U t i li t y  
L
dB  
R
–30 –10  
–6  
–2  
0
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select “HDD Format”.  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to display “HDD Info.”.  
H D D F o r m a t  
L
dB  
R
–30 –10  
–6  
–2  
0
H D D In f o .  
L
dB  
R
–30 –10  
–6  
–2  
0
3. Press the MULTI JOG knob (ENTER on the remote  
control) to display “Initialize ?”.  
4. Press the MULTI JOG knob (ENTER on the remote  
In i t i a li z e ?  
control) again to display the capacity of the HDD.  
L
dB  
R
–30 –10  
–6  
–2  
0
Rotating the MULTI JOG knob (pressing +/–, H or G on the  
remote control) changes the display as follows. The disc  
capacity is indicated by time (hour and minute).  
4. Press the w/d to display “Format Really ?”.  
Capacity (total time)  
F o r m a t R e a lly  
L
dB  
R
–30 –10  
–6  
–2  
0
T o t a l 2 5 0 h 4 m  
L
dB  
R
–30 –10  
–6  
–2  
0
To format the HDD, press INPUT. If not, press a.  
5. Press INPUT to display “Format OK” and restart the  
unit.  
Usage (total used time)  
Note  
U s e d  
1h 7 m  
L
You cannot apply “HDD Format” for a new HDD. To format a  
new HDD after installation, refer to “HDD Installation  
Manual”.  
dB  
R
–30 –10  
–6  
–2  
0
Available space (recordable time)  
A v a i l 2 4 8 h 5 6 m  
L
dB  
R
–30 –10  
–6  
–2  
0
Memo  
The times displayed are rough estimates.  
5. Press a or MENU to exit.  
The unit returns to the stop mode.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYSTEM UTILITY  
Checking the firmware version  
Initializing settings (Initialize)  
(Firm. Version)  
You can initialize the settings that have been changed. The OPC  
data stored in this unit is also initialized.  
Software that is called “firmware” is built into this unit. This  
firmware controls the operation. The following steps describe the  
firmware version check procedures.  
1. Carry out steps 1 to 3 in “Checking the firmware  
version (Firm. Version)” (at left).  
The display changes for the system utility item selection.  
1. Press MENU while this unit is in the stop mode.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
The display changes for the menu item selection.  
remote control) to select “Initialize”.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select “Sys. Utility”.  
In i t i a li z e  
L
dB  
R
–30 –10  
–6  
–2  
0
S y s . U t i li t y  
L
dB  
R
–30 –10  
–6  
–2  
0
3. Press the MULTI JOG knob (ENTER on the remote  
control) to display “Initialize ?”.  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to display “Firm. Version”.  
In i t i a li z e ?  
L
6
dB  
R
–30 –10  
–6  
–2  
0
F i r m . V e r s i o n  
L
dB  
R
–30 –10  
–6  
–2  
0
Press a to cancel the initialization process.  
4. Press COMPLETE.  
4. Press the MULTI JOG knob (ENTER on the remote  
The unit restarts with the initial settings.  
control) again to display the version of the firmware.  
Rotating the MULTI JOG knob (pressing +/–, H or G on the  
remote control) changes the display as follows.  
System firmware version  
V 1. 0 . 0 0 J u n 2  
L
dB  
R
–30 –10  
–6  
–2  
0
CDR drive firmware version  
C D R W  
7 . 0 6  
L
dB  
R
–30 –10  
–6  
–2  
0
Model of HDD  
A B C D E F G H IJ K L M  
L
dB  
R
–30 –10  
–6  
–2  
0
5. Press a or MENU to exit.  
The unit returns to the stop mode.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYSTEM UTILITY  
Setting the display brightness  
Setting the video output  
(Dimmer Setup)  
(VIDEO Output)  
You can change the brightness of the display.  
You can switch the on-screen display output through the VIDEO  
OUT jacks on and off.  
1. Carry out steps 1 to 3 in “Checking the firmware  
version (Firm. Version)” (P.73).  
1. Carry out steps 1 to 3 in “Checking the firmware  
version (Firm. Version)” (P.73).  
The display changes for the system utility item selection.  
The display changes for the system utility item selection.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select “Dimmer Setup”.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select “VIDEO Output”.  
D i m m e r S e t u p  
L
dB  
R
–30 –10  
–6  
–2  
0
V ID E O O u t p u t  
L
dB  
R
–30 –10  
–6  
–2  
0
3. Press the MULTI JOG knob (ENTER on the remote  
control) to display the current setting.  
3. Press the MULTI JOG knob (ENTER on the remote  
control) to display the current setting.  
Rotating the MULTI JOG knob (pressing +/–, H or G on the  
remote control) changes the setting as follows.  
Rotating the MULTI JOG knob (pressing +/–, H or G on the  
remote control) switches the setting between “VIDEO On” and  
“VIDEO Off”.  
D i m m e r B r i g h t  
L
dB  
R
–30 –10  
–6  
–2  
0
Memo  
Initial setting is “VIDEO On”.  
4. Press the MULTI JOG knob (ENTER on the remote  
control) or COMPLETE.  
D i m m e r M i d  
The on-screen display output is set to on or off.  
L
dB  
R
–30 –10  
–6  
–2  
0
Memo  
Select “VIDEO Off” if the on-screen display is not used so that you  
can enjoy playback or recording with higher quality sounds.  
D i m m e r D a r k  
5. Press a or MENU to exit.  
L
dB  
R
–30 –10  
–6  
–2  
0
The unit returns to the stop mode.  
Memo  
Initial setting is “Dimmer Bright”.  
4. Press the MULTI JOG knob (ENTER on the remote  
control) or COMPLETE.  
The display brightness has been set.  
5. Press a or MENU to exit.  
The unit returns to the stop mode.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYSTEM UTILITY  
Starting playback automatically  
Updating the firmware version  
(Auto Play)  
(Firm. Update)  
You can set the auto play function which automatically starts  
playback when the power of this unit is turned on. Using an  
external timer with this feature enables timer playback.  
This menu is prepared for the expansion of the functions in the  
future.  
1. Carry out steps 1 to 3 in “Checking the firmware  
version (Firm. Version)” (P.73).  
The display changes for the system utility item selection.  
2. Rotate the MULTI JOG knob (press +/–, H or G on the  
remote control) to select “Auto Play”.  
A u t o P la y  
L
dB  
R
–30 –10  
–6  
–2  
0
3. Press the MULTI JOG knob (ENTER on the remote  
control) to display the current setting.  
6
A u t o P la y O f f  
L
dB  
R
–30 –10  
–6  
–2  
0
Rotating the MULTI JOG knob (pressing +/–, H or G on the  
remote control) switches the setting between “Auto Play On”  
and “Auto Play Off”.  
Memo  
Initial setting is “Auto Play Off”.  
4. Press the MULTI JOG knob (ENTER on the remote  
control) or COMPLETE.  
The auto play function is set to on or off.  
If the auto play function is set to on, the setting will be applied  
when the power of this unit is turned on the next time.  
• This unit plays data on the drive that had been last selected  
when the power of this unit was last turned off.  
• This unit plays in the playback mode (such as random play)  
that had been last set when the power of this unit was last  
turned off.  
5. To carry out timer playback, connect the power cable  
of this unit to an external timer, then set the timer.  
Memo  
The setting for the timer recording takes precedence over the setting  
for the auto play function. If the timer recording (P.32) is set, this  
unit starts recording when the power of this unit is turned on the  
next time even when “Auto Play On” is selected.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
If this unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures  
suggested. If they cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your  
authorized YAMAHA dealer or service center for assistance.  
SYMPTOM  
CAUSE  
REMEDY  
This unit does not turn on  
when POWER is pressed.  
The power cable is not completely connected. Securely connect the power cable (P.10).  
Playback does not begin  
with the CD loaded.  
There is moisture on the laser pick-up.  
Turn the power of this unit and wait 20 to 30 minutes  
before trying to play (P.14).  
The CD has been loaded upside down.  
The CD is dirty.  
Reload the CD with the label side facing up.  
Clean the CD (P.v).  
Playback is delayed, or  
The CD may be scratched or damaged.  
Check the CD carefully. Replace it if necessary.  
begins at the wrong place.  
Recording/copying is not  
possible.  
The CD-R or CD-RW disc has been finalized. Load a recordable CD that has not been finalized yet (P.iv).  
The CD-R or CD-RW disc that has completed Load a recordable CD (P.iv).  
recording is loaded.  
INPUT is not correctly set.  
Set INPUT to the correct position according to the input  
signal (P.31).  
Further digital recording or copying has been Switch to ANALOG to make a recording (P.31).  
attempted from the digitally copied sources.  
There is not enough available space left or 99 Load a recordable disc (for a CD-R or CD-RW disc) (P.iv).  
tracks have already been recorded on the  
disc.  
Select the other discs (for the HDD) (P.16).  
There is no available space on the HDD.  
Erase the space not being used to create available space on  
the HDD for further recording.  
If the power cable was unplugged or there  
was a power outage during recording, the  
recorded material may be lost.  
If the recording of a CD-RW disc is interrupted, try  
recording again from the beginning. When the recording of  
a CD-R disc is interrupted, start recording over again with  
a disc that can be recorded on.  
The CD-R or CD-RW disc is dirty or  
damaged.  
Clean or replace the CD-R or CD-RW disc (P.v).  
Some vibration and rotation This unit copies by rotating the CD, CD-R or Lower the copying speed to decrease vibration and rotation  
noise are created during the CD-RW disc at high speed.  
copying.  
noise.  
Continuous recording  
The maximum recordable time for a disc or  
Regardless of the recording mode, the recording will be  
cannot be made on a disc or track on the HDD is 179 minutes 59 seconds. performed continuously to the next available disc after the  
track on the HDD beyond  
180 minutes.  
recording has been performed to one disc for its maximum  
length.  
The beginning of the track  
is missing during the  
playback when this unit is  
connected digitally to an  
amplifier.  
The tracks that have different emphases have Connect to the amplifier using the ANALOG LINE OUT  
been played.  
(PLAY) jacks (P.10).  
The sound is missing when  
this unit switches one disc  
to another.  
The titles appear on the display during the  
playback of the part that has been recorded  
stretching over the two discs.  
Press TEXT/TIME to switch the display to the indication  
of time (P.18).  
A CD-R or CD-RW that has Your CD or DVD player is not compatible  
been recorded with this unit with CD-R or CD-RW discs.  
Use a CD or DVD player compatible with CD-R or CD-  
RW discs.  
cannot be played on the  
The CD-R or CD-RW disc has not been  
Finalize the CD-R or CD-RW disc (P.47).  
other CD player or DVD  
finalized.  
player.  
Sound “skips”.  
This unit and/or the component connected is  
being subjected to vibration or impact.  
Relocate the unit. (This is not possible if the skipping  
sound is already on the recording due to vibrations or  
impact that occurred during recording.)  
The CD is dirty.  
Clean the CD (P.v).  
This unit makes noise.  
Connection has not correctly been made.  
Properly connect the audio pin cables. Replace the audio  
cables (P.10).  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
REMEDY  
SYMPTOM  
CAUSE  
This unit does not operate  
properly.  
The internal microcomputer has been frozen. Turn off the power of this unit and then turn on again after  
about one minute (P.14).  
There is rotation noise of  
the fan.  
The temperature inside this unit rises.  
The fan starts to rotate to cool off the temperature inside  
this unit.  
A noise occurs at the  
A very low frequency component among the  
Improvement can be made by adding a short fade-in or  
change of the tracks that  
has been recorded from the  
analog record and edited.  
wow and flutter of the analog record is being fade-out to the track (P.64).  
output as a noise.  
Remote control does not  
work.  
The batteries of the remote control are too  
weak.  
Replace two batteries with new ones (P.11).  
Remote control is from too far.  
Remote control is being used at an incorrect  
angle.  
Use the remote control within 6 m and 60 degrees radius  
(P.11).  
Direct sunlight or lighting (of an inverter type Change the position so that the remote control sensor is not  
of fluorescent lamp, etc.) is striking the  
remote control sensor.  
exposed to strong lighting.  
TV does not correctly  
function when the remote  
control is being used.  
Remote control is being used near TV set  
with a remote control sensor.  
Relocate this unit away from the TV or cover the TV’s  
remote control sensor.  
The picture on the TV is  
impaired.  
The indoor antenna is used.  
Use an outdoor antenna, or set this unit away from the TV  
set.  
7
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY MESSAGES  
Can’t Copy  
Format Really  
This message is displayed for approximately 3 seconds when digital  
recording or copying is not possible according to the SCMS  
standard.  
This message confirms starting the format of the HDD after  
“Initialize ?” appears.  
HDD Full  
Refer to “Rules of Digital Recording” (P.82).  
This message is displayed when recording to the HDD cannot be  
performed any further because the recording has been made up to  
the total recordable time.  
Can’t Edit  
This message is displayed when a prohibited editing operation has  
been attempted.  
Initialize ?  
Can’t Tr.Lev.  
This message confirms starting the format of the HDD, or the  
initialization of each item.  
The album with its tracks’ level adjusted is to be copied to a CD-R  
disc in the Audio Master Quality Recording mode.  
Invalid Mode  
Can’t use HDD  
The recording mode that cannot be selected during the timer  
recording setting has been selected.  
The loaded HDD has been formatted by other CDR-HD1500s.  
Reformat by the CDR-HD1500 on which you plan to use that HDD  
(P.72).  
New Disc  
The disc in the disc tray is either a new CD-R or CD-RW disc, or a  
CD-RW disc that has been erased by using a “Disc Erase” or “All  
Erase”.  
Change Discs!  
This message informs that a CD needs to be changed to a disc to be  
used for duplicating when copying from a CD onto the HDD has  
been completed.  
No Data  
There are no tracks (data) recorded on the HDD.  
Check Disc  
No Disc  
This unit fails to read the CD because the CD has been loaded on  
the disc tray upside down or the CD has remarkable scratch on it, or  
some kind of error has been occurred during operation. Check the  
disc, and exchange the CD if necessary.  
There are no CDs on the disc tray.  
No Enough Spc  
There is not enough space for copying, or the track number exceeds  
the maximum number when copying.  
Data Track  
This message is displayed when the data track is being played.  
No Input  
There are no input signals when attempting the recording from the  
external components digitally.  
Disc Full  
This message is displayed when recording to a CD-R or CD-RW  
disc cannot be performed any further because the recording has  
been made up to the total recordable time.  
No Previous  
When making “Tr. Interval” on the ALBUM EDITING menu or  
“Track Adjust” on the TRACK EDITING menu, there is no track  
before the track to be edited.  
Disc No.Full  
When the number of discs recorded on the HDD has reached its  
maximum of 999 discs, this message is displayed if more discs have  
been attempted to be added.  
No Source  
There is no source recorded on the HDD or CDs when copying.  
Drive Check  
Not Audio  
Some kind of error has been occurred in the HDD or the CDR  
drive. Contact the nearest authorized YAMAHA dealer or service  
A non-audio CD-R or CD-RW disc, such as a CD-R or CD-RW disc  
for PCs, has been loaded in the disc tray, and recording has been  
attempted on that CD-R or CD-RW disc.  
center. Or HDD is not set to “slave” precisely. Refer to the “HDD  
Installation Manual” and set the HDD to “slave”.  
No Undo data  
Erasing  
Undo is not possible.  
Erasing a CD-RW disc is being performed. The erasing progress is  
indicated by the level meter.  
OPC Adjust  
This message is displayed while OPC (Optimum Power  
Calibration) optimized the laser power to the reflectivity of the disc.  
Approximately 10 seconds may be required to complete this  
automatic adjustment. However, this time length may change  
according to the type of the disc that has been loaded.  
Finalize OK?  
This message confirms starting the finalization of a CD-R or CD-  
RW disc. If you wish to finalize, press w/d.  
Finalizing  
Pack Before !  
Finalization is being performed. The finalization progress is  
indicated by the level meter.  
This message is displayed when the editing operation cannot be  
done unless “Pack” is performed.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY MESSAGES  
Reading  
This unit reads the format of the CD, CD-R, or CD-RW disc loaded  
on the disc tray. Approximately 10 to 20 seconds may be required  
to complete this automatic adjustment. However, this time length  
may change according to the type of the CD, CD-R, or CD-RW disc  
that has been loaded.  
Standby  
This message is displayed for several seconds after REC has been  
pressed to record on a CD-R or CD-RW disc.  
Timer Standby  
This message is displayed after the timer recording setting has been  
completed, or displayed for approximate five seconds before the  
timer recording starts.  
Track No.Full  
One disc can contain up to 99 tracks. Recording is attempted on the  
disc that has reached the maximum number.  
Unavailable  
The CD-R disc whose recordable time is other than 74 minutes or  
79 minutes or the CD-R disc which does not support 4x writing, or  
the CD-RW disc has been loaded when copying in the Audio  
Master Quality Recording mode.  
7
Unrecordable  
In recording or copying onto a CD-R or CD-RW disc, the disc  
cannot be used for recording or copying. Or in recording or copying  
onto the HDD, no space is available.  
Wait  
This message flashes while this unit is writing information to the  
PMA (Program Memory Area) after a is pressed in recording onto  
a CD-R or CD-RW disc, or flashes while processing the data on the  
HDD or detecting the loaded HDD when this unit is turned on.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GLOSSARY  
The following explains key terms used in this manual.  
Album  
Finalize  
An album is a unit used while playing back or recording audio  
signals on this unit. For detailed information, see “Data on the  
HDD” (P.16).  
Finalize is a process to enable audio data recorded onto CD-R/RW  
discs to be played back on CD players or other CD-RW compatible  
devices. An audio disc created on this unit must be finalized to be  
played back on other playback devices.  
Audio Master Quality Recording  
Group  
Audio Master Quality Recording is a high quality recording mode  
used to create an audio CD with its original quality. By minimizing  
the jitter that subtly degrades the audio quality or even causes data  
transmission failure, Audio Master Quality Recording actualizes a  
clear sound close to the original sound.  
A group is a unit used while playing back or recording audio signals  
on this unit and is a collective term for albums, discs and book-  
marks. A group consists of several audio tracks. For detailed  
information, see “Data on the HDD” (P.16) or “Data on CDs”  
(P.17).  
Bookmark  
SCMS  
A bookmark is a collection of audio tracks of your preference. You  
can play back or record audio data using a bookmark, and an album  
can be created from a bookmark. For detailed information, see  
“Data on the HDD” (P.16) or “Data on CDs” (P.17).  
SCMS (Serial Copy Management System) is a system developed by  
JASRAC (Japanese Society for Rights of Authors, Composers and  
Producers) to prevent unlimited digital copying of CD’s and other  
prerecorded media. In essence, SCMS prevents more than one  
generation of digital copying (i.e. a copy of an SCMS copy-  
protected source cannot be duplicated).  
CD TEXT  
CD TEXT is text information (album title, track title, etc) recorded  
on CDs and can be read only with a CD player or CD-ROM drive  
that supports CD TEXT.  
TOC  
TOC (Table of Contents) is a disc index recorded on a finalized disc  
and enables playback devices to distinguish audio tracks recorded  
on the disc.  
Digital Move  
Digital move implies moving audio data recorded on the HDD onto  
CD-R/RW discs. The audio data once digital moved onto CD-R/RW  
discs are erased from the HDD. Because digital move is regarded as  
one generation of digital copying, audio data can be digitally copied  
from CDs onto the HDD and then from the HDD onto CD-R/RW  
discs. However, audio data cannot be copied onto several CD-R/  
RW discs at the same time.  
Track  
A track is equivalent to one audio recording and is the smallest unit  
used while playing back or recording audio signals on this unit. For  
detailed information, see “Data on the HDD” (P.16) or “Data on  
CDs” (P.17).  
Disc  
Track Mark  
A disc is a unit used while playing back or recording audio signals  
on this unit. For detailed information, see “Data on the HDD”  
(P.16) or “Data on CDs” (P.17).  
A track mark is a mark made at the beginning of a track and enables  
playback devices to distinguish the starting position of each audio  
track. A track mark also facilitates track search and intro playback.  
You can make a track mark on this unit either automatically or  
manually.  
Emphasis  
Emphasis is a recording mode used to improve the quality of audio  
data. Emphasis turns the volume of the upper register up before  
recording and down while playing back, resulting in a decrease in  
the noise level of the upper register.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIST OF SYSTEM MENU  
You can make the following operations on this unit’s system menu according to your needs.  
Menu  
Menu content  
Page  
Album New  
Edit Stored  
Edits the albums on the HDD. For detailed information on each menu, see  
“LIST OF EDIT MENU” (P.50) or “EDITING ALBUMS” (P.52-57).  
52-57  
Album Copy  
Album Rename  
Album Delete  
Album Pack  
Album Title  
Track Shuffle  
Track Level  
Tr. Interval  
Album Edit*  
Track Rename  
Track Adjust  
Track Erase  
Part Erase  
Edits the tracks on the HDD. For detailed information on each menu, see  
“LIST OF EDIT MENU” (P.50) or “EDITING TRACKS” (P.58-65).  
58-65  
Track Combine  
Track Divide  
Track Pack  
Track Edit*  
7
Add Fade In  
Add Fade Out  
Track Title  
Disc Rename  
Disc Erase  
Edits the discs on the HDD. For detailed information on each menu, see  
“LIST OF EDIT MENU” (P.50) or “EDITING DISCS” (P.66-69).  
66-69  
Disc Combine  
Disc Divide  
Disc Pack  
Disc Edit*  
Disc Title  
Undo  
Cancels the editing operation.  
Displays the HDD capacity.  
70  
72  
72  
73  
73  
74  
74  
75  
75  
36  
HDD Info.  
HDD Utility  
HDD Format  
Firm. Version  
Initialize  
Formats the HDD.  
Displays the firmware version in use.  
Initializes settings for various menus.  
Adjusts the display brightness.  
Turn on or off the video output.  
Starts playback automatically when the power is on.  
Updates the firmware version.  
Dimmer Setup  
VIDEO Output  
Auto Play  
Sys. Utility  
Firm. Update  
OPT TH Level  
COAX TH Level  
Adjusts the settings for detecting track intervals in the synchronized  
recording mode. For detailed information, see “Setting a condition for  
synchronized recording” (P.36).  
Synchro Setup ANLG TH Level  
Int. Time  
End Duration  
DAC Mode  
Converts digital/analog output signals.  
71  
* “Album Edit”, “Track Edit” and “Disc Edit” only display when the HDD is selected.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RULES OF DIGITAL RECORDING AND NOTES ON SYSTEM  
Rules of digital recording  
Notes on system  
SCMS (Serial Copy Management System)  
Number and length of recordable discs and  
tracks  
• One CD-R or CD-RW disc, or one disc on the HDD can be  
recorded with up to 99 tracks on them.  
As a digital audio component, this unit conforms with the Serial  
Copy Management System (SCMS) standards. The Serial Copy  
Management System restricts copies made by recording digital  
signals to first-generation copies only.  
• Once 99 tracks have been recorded, no further recording is  
possible even if space for recording is available on the disc.  
The digital program sources that have been recorded cannot be  
digitally recorded again.  
• The minimum length of one track must be 4 seconds. If a  
recording is stopped while the track is less than 4 seconds long,  
this unit will record for 4 seconds, and then stop recording. The  
maximum length of one track is 179 minutes 59 seconds for the  
HDD.  
There are 2 rules as follows:  
Rule 1  
Digital sources such as commercially available CDs can be copied  
digitally onto other recordable digital media with this unit (a first-  
generation digital copy). However, the first-generation digital copy  
cannot be copied digitally any further.  
• 999 discs can be created at maximum on the HDD of this unit.  
However, the number of discs that can be created is limited  
according to the space availability (total recordable time) on the  
HDD.  
Rule 2  
The source that was recorded via the ANALOG LINE IN (REC)  
jacks can be copied digitally onto other recordable digital media  
(a first-generation digital copy). However, the first-generation  
digital copy cannot be copied digitally any further.  
• The maximum length of one disc on the HDD is 99 minutes 59  
seconds. However, since each track on the HDD is handled in the  
unit of frame (75 frames are equal to one second), the maximum  
length of one track or disc may vary slightly.  
• When recording on a CD-R or CD-RW disc, 2-second silence will  
be automatically added to the beginning of the first track.  
Therefore the actual total recordable time will be 2 seconds  
shorter than the total recordable time of a CD-R or CD-RW disc.  
This unit monitors the SCMS status for each track when a digital  
recording is made. If the track is protected from digital recording  
and copying, it is not possible to make a digital recording and copy  
of that track.  
The SCMS standard does not apply to analog recording and  
copying.  
Source sampling rate conversion  
• Digital input of this unit supports sampling frequencies of 32kHz,  
44.1kHz, 48kHz, and 96kHz. This unit converts these inputs to  
the 44.1kHz,16-bit digital signals and records them onto the  
HDD, or a CD-R or CD-RW disc.  
When making a copy from a CD onto the HDD, or from the HDD  
onto a CD-R or CD-RW disc, any of the copy methods described  
below can be selected. The following selections are contained in  
“Copy Method”.  
• Analog input is also converted to the same digital signal to be  
recorded.  
• “Auto Dig/Anlg”:  
Automatically switches to analog recording if the track cannot be  
digitally recorded for SCMS.  
• This unit outputs the signals at the sampling frequency of  
44.1kHz, 16-bit from its digital output.  
• “Digital Copy”:  
Performs digital copying of only those tracks that can be digitally  
copied.  
Recording of non-audio signals  
• This unit is designed exclusively for recording audio signals.  
Recording is only possible for audio signals.  
• “Digital Move”:  
Performs digital copying of the tracks that cannot be digitally  
copied by “Digital Copy” when copying from the HDD onto a  
CD-R or CD-RW disc.  
• When a CD with CD TEXT is copied onto the HDD, CD TEXT  
will be automatically copied if it is not copy protected. When a  
CD with CD TEXT is recorded from an external CD player, CD  
TEXT cannot be copied even if it is not copy protected. To copy  
CD TEXT, use the built-in CDR drive of this unit.  
• “Analog Copy”:  
Performs analog copying regardless of the SCMS standard.  
• If the digital signals contain graphic data such as CD graphics, the  
non-audio signals will not be recorded.  
Digital Move  
This unit has a built-in HDD with large space that makes a long  
recording possible. You can create your own CD by editing the  
various program sources that have been recorded onto the HDD of  
this unit and copying them onto a CD-R or CD-RW disc.  
• It is not possible to record from non-audio sources such as CD-  
ROM or DVD.  
Data processing  
• A small amount of space may be used for data processing besides  
recording the actual program sources.  
If you want to make a digital copy of the original data that has been  
created on the HDD to a CD-R or CD-RW disc, the “Digital Move”  
method is convenient. You can make a digital copy from the HDD  
onto a CD-R or CD-RW disc even if the track is protected from  
making a second-generation copy by the SCMS standard.  
• Although this unit is capable of recording 999 albums at  
maximum onto the HDD, the data processing speed may slow  
down if a large number of albums is created.  
However, since the concept of “Digital Move” is that the data is  
moved from the HDD onto a CD-R or CD-RW disc, the original  
data on the HDD is erased when moving is complete.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Audio Performance  
Outputs  
Frequency response .................................... 5 to 20,000 Hz, 0.5 dB  
ANALOG LINE OUT (PLAY)  
Type ............................................................................... Pin jack  
Standard output level (1 kHz, 0 dB) ..................... 2.0 0.5 Vrms  
S/N ratio (EIAJ)  
Playback ......................................................................... 105 dB  
Recording ......................................................................... 92 dB  
DIGITAL OUT (OPTICAL)  
Type ............................................. Square optical connector jack  
Total harmonic distortion (1 kHz)  
Playback ........................................................................ 0.004 %  
Recording ...................................................................... 0.006 %  
DIGITAL OUT (COAXIAL)  
Type ........................................................................ Coaxial jack  
Standard output level ........................................ 0.5 Vp-p (75 )  
Dynamic range  
Playback ........................................................................... 99 dB  
Recording ......................................................................... 92 dB  
PHONES  
Standard output level (Input 150 shorted, –20 dB)  
............................................................................ 300 mV/150 Ω  
Laser Diode Properties  
General  
Material ................................................................................ GaAIAs  
Wavelength ................................................................. 780 to 787 nm  
Power supply  
[U.S.A. model] ................................................ AC 120 V, 60 Hz  
[Australia model]............................................. AC 240 V, 50 Hz  
[U.K. and Europe models]............................... AC 230 V, 50 Hz  
Pulse durations and max. output at the objective lens of the laser  
pickup unit  
DC erase mode ................................ Max. 12 mW (Continuous)  
Write mode ............................................................ Max. 70 mW  
(Max. Cycle 98 ns, Min. Cycle 27 ns at Max. Speed)  
Power consumption .................................................................. 37 W  
Operating environment  
Temperature ...............................................................+5 to 35°C  
Humidity .............................. 30 to 90 % RH (No condensation)  
7
Inputs  
Dimensions (W x H x D) ............................ 435 x 115.5 x 414.5 mm  
(17-1/8” x 4-1/2” x 16-5/16”)  
ANALOG LINE IN (REC)  
Type ............................................................................... Pin jack  
Standard input level ............................................ 500 mV/24 kΩ  
Weight........................................ 8.2 kg (18 lbs. 1 oz.) without HDD  
DIGITAL IN (OPTICAL)  
Type ............................................. Square optical connector jack  
DIGITAL IN (COAXIAL)  
Type ........................................................................ Coaxial jack  
Standard input level .......................................... 0.5 Vp-p (75 )  
Specifications are subject to change without notice.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Westinghouse Outdoor Ceiling Fan ETL ES Comet WH09 User Manual
Whirlpool Clothes Dryer 3401011 User Manual
Whirlpool Oven W10253434A User Manual
Whirlpool Washer Dryer LSR4311DQO User Manual
Xantrex Technology Power Supply 400R User Manual
Yamaha Blu ray Player BD A1040 User Manual
Zanussi Clothes Dryer TDE 4234 W User Manual
Zanussi Refrigerator 110751 User Manual
Zanussi Refrigerator 113173 User Manual
Zanussi Washer FL 1032 User Manual